[RESOLU]Pb de connexion wifi...

fanatux · Le 26/10/2006, à 19:26

J'ai un ptit pb qui en pose beauoup d'autre...

Tout simplement, je vient d'installer edgy en version (noramlement) stable mais je n'arrive pas a me connecter a internet via le wifi.

Je lance l'outil "réseau" je double clik sur la connexion wifi et au moment de choisir le réseau sur lequel je veut me connecter, aucun réseau n'apparait dans le petit menu de slection du reseau alors qu'en temps normal, il y a au moins 3 réseau pres dché moi... Un ami est venu chez moi avec son ptb et detecte parfaitement les reseau (que je captai aussi parfaitement avec dapper) Jai essayé e rentré le nom et la clé wep a la main mais cela ne marche pas mieu...

le probleme est que sans internet, pas de mise a jours et pas d'install de logiciel...

Que faire...

PS: je ne peut pas me connecter en filaire pour des raison materielles je ne peut donc pas telecharger les maj en filaire (j'ai pas le modem et les cables appropriés...)

Merci d'avance...

Dernière modification par fanatux (Le 28/10/2006, à 13:36)

JC · Le 26/10/2006, à 19:52

J'ai le mm problème depuis mon passage dapper-----> Edgy
L'utilitaire réseau de base de fonctionne pas non plus pour le Wifi mais marche nickel pour le filaire.
La seule solution que j'ai trouvé est d'utiliser wifi-radar qui continue à marcher parfaitement.

foustala · Le 26/10/2006, à 19:52

fanatux a écrit :

Que faire...

donner le nom de ton materiel par exemple. il n'y a aucun devin sur ce forum.

tappes "lspci" dans un terminal

JC · Le 26/10/2006, à 20:01

mon modèle c'est:

02:01.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network Connection (rev 05)

fanatux · Le 26/10/2006, à 20:09

ok jvai repasser sur linux (vive le dual boot...) pour trouver sa... J'aimerais bien installer wifi radar, mais jpeu po ltelecharger...

fanatux · Le 26/10/2006, à 21:29

Et moi c'est:

Network Controller; Intel corporation PRO/Wireless 3945ABG Network Connection (rev 02)

Est ce que je pourrai telecharger wifiradar depuis un mac et le mettre sur un support amovible pour l'installer sur le pc ou ya linux??

JC · Le 27/10/2006, à 00:10

bien sur ici:
http://packages.ubuntu.com/edgy/net/

lagnole · Le 27/10/2006, à 00:12

Envoi moi un mail depuis windows (puisque tu as un dual boot...) a lagnole at free point fr et je t'enverrai wifi radar si tu le souhaites! De la, Linux sachant lire sur le NTFS et le FAT, cela devrait etre simple pour toi d'installer wifi-radar!

fanatux · Le 27/10/2006, à 00:25

Merci jc, jvai voir ske jpeu faire...
Jtenvoie un mail tout de suite lagnole

fanatux · Le 27/10/2006, à 12:47

Merci beaucoups! j'ai reussi a l'installer et je detecte meme les réseau!! Mais je n'arrive pas a le configurer et a me connecter a ces réseaux....
Est-ce que quelqu'un pourrait m'expliquer comment on fait? merci

fanatux · Le 27/10/2006, à 16:15

RRRaaaa!!! mai pk sa marche pas!!! J'arrive meme pas a me connecter en fillaire!! sa commence a m'enerver!! jvai finir par revnir sous dapper si sa continue!!!Au moins, apres 5 min de config tout marchai nikel!!!

foustala · Le 27/10/2006, à 17:13

donne nous ton:
ifconfig -a
cat /etc/network/interfaces (ne mets pas les mots de passe en clair)

donne nous le résultat de
sudo /etc/init.d/networking restart
dmesg

fanatux · Le 28/10/2006, à 13:14

le voila, c'est un peu long...

-$ ifconfig -a

eth0      Lien encap:Ethernet  HWaddr 00:17:31:F6:A3:BE  
          BROADCAST MULTICAST  MTU:1500  Metric:1
          Packets re√ßus:36911 erreurs:0 :0 overruns:0 frame:0
          TX packets:68 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:1000 
          Octets re√ßus:2222736 (2.1 MiB) Octets transmis:15893 (15.5 KiB)
          Interruption:169 Adresse de base:0xc800 

eth1      Lien encap:Ethernet  HWaddr 00:13:02:77:9F:A3  
          inet adr:10.0.1.1  Bcast:10.0.1.255  Masque:255.255.255.0
          BROADCAST MULTICAST  MTU:1500  Metric:1
          Packets re√ßus:1933 erreurs:9 :274 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:1000 
          Octets re√ßus:43735 (42.7 KiB) Octets transmis:17081 (16.6 KiB)
          Interruption:177 Adresse de base:0xe000 M√©moire:fe1ff000-fe1fffff 

lo        Lien encap:Boucle locale  
          inet adr:127.0.0.1  Masque:255.0.0.0
          adr inet6: ::1/128 Scope:H√¥te
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          Packets re√ßus:1066 erreurs:0 :0 overruns:0 frame:0
          TX packets:1066 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:0 
          Octets re√ßus:81408 (79.5 KiB) Octets transmis:81408 (79.5 KiB)

sit0      Lien encap:IPv6-dans-IPv4  
          NOARP  MTU:1480  Metric:1
          Packets re√ßus:0 erreurs:0 :0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:0 
          Octets re√ßus:0 (0.0 b) Octets transmis:0 (0.0 b)


-$cat /etc/network/interfaces

auto lo
iface lo inet loopback


iface eth0 inet dhcp

auto eth2
iface eth2 inet dhcp

auto ath0
iface ath0 inet dhcp

auto wlan0
iface wlan0 inet dhcp


:~$ sudo /etc/init.d/networking restart

 * Reconfiguring network interfaces...                                          There is already a pid file /var/run/dhclient.eth2.pid with pid 134993416
Internet Systems Consortium DHCP Client V3.0.4
Copyright 2004-2006 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/

SIOCSIFADDR: No such device
eth2: ERROR while getting interface flags: No such device
eth2: ERROR while getting interface flags: No such device
Bind socket to interface: No such device
Failed to bring up eth2.
There is already a pid file /var/run/dhclient.ath0.pid with pid 134993416
Internet Systems Consortium DHCP Client V3.0.4
Copyright 2004-2006 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/

SIOCSIFADDR: No such device
ath0: ERROR while getting interface flags: No such device
ath0: ERROR while getting interface flags: No such device
Bind socket to interface: No such device
Failed to bring up ath0.
wlanctl-ng: No such device
Failed to enable the device, exitcode= 1 .
run-parts: /etc/network/if-pre-up.d/linux-wlan-ng-pre-up exited with return code 1
There is already a pid file /var/run/dhclient.wlan0.pid with pid 134993416
Internet Systems Consortium DHCP Client V3.0.4
Copyright 2004-2006 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/

SIOCSIFADDR: No such device
wlan0: ERROR while getting interface flags: No such device
wlan0: ERROR while getting interface flags: No such device
Bind socket to interface: No such device
Failed to bring up wlan0.


$dmesg

[17179569.184000] Linux version 2.6.17-10-generic (root@vernadsky) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Fri Oct 13 18:45:35 UTC 2006 (Ubuntu 2.6.17-10.33-generic)
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[17179569.184000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[17179569.184000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[17179569.184000]  BIOS-e820: 0000000000100000 - 000000003ffd0000 (usable)
[17179569.184000]  BIOS-e820: 000000003ffd0000 - 000000003ffde000 (ACPI data)
[17179569.184000]  BIOS-e820: 000000003ffde000 - 0000000040000000 (ACPI NVS)
[17179569.184000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[17179569.184000]  BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
[17179569.184000] 127MB HIGHMEM available.
[17179569.184000] 896MB LOWMEM available.
[17179569.184000] found SMP MP-table at 000ff780
[17179569.184000] On node 0 totalpages: 262096
[17179569.184000]   DMA zone: 4096 pages, LIFO batch:0
[17179569.184000]   Normal zone: 225280 pages, LIFO batch:31
[17179569.184000]   HighMem zone: 32720 pages, LIFO batch:7
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 ACPIAM                                ) @ 0x000f79b0
[17179569.184000] ACPI: RSDT (v001 A M I  OEMRSDT  0x05000610 MSFT 0x00000097) @ 0x3ffd0000
[17179569.184000] ACPI: FADT (v002 A M I  OEMFACP  0x05000610 MSFT 0x00000097) @ 0x3ffd0200
[17179569.184000] ACPI: MADT (v001 A M I  OEMAPIC  0x05000610 MSFT 0x00000097) @ 0x3ffd0390
[17179569.184000] ACPI: MCFG (v001 A M I  OEMMCFG  0x05000610 MSFT 0x00000097) @ 0x3ffd03f0
[17179569.184000] ACPI: BOOT (v001 A M I  OEMBOOT  0x05000610 MSFT 0x00000097) @ 0x3ffd0430
[17179569.184000] ACPI: OEMB (v001 A M I  AMI_OEM  0x05000610 MSFT 0x00000097) @ 0x3ffde040
[17179569.184000] ACPI: DSDT (v001  A6JC0 A6JC0216 0x00000216 INTL 0x02002026) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x808
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 6:14 APIC version 20
[17179569.184000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[17179569.184000] Processor #1 6:14 APIC version 20
[17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 50000000 (gap: 40000000:bee00000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hda4 ro quiet splash
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Enabling fast FPU save and restore... done.
[17179569.184000] Enabling unmasked SIMD FPU exception support... done.
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[17179569.184000] Detected 1596.277 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179570.756000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[17179570.760000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179570.808000] Memory: 1029396k/1048384k available (1910k kernel code, 18364k reserved, 1070k data, 308k init, 130880k highmem)
[17179570.808000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179570.888000] Calibrating delay using timer specific routine.. 3197.60 BogoMIPS (lpj=6395205)
[17179570.888000] Security Framework v1.0.0 initialized
[17179570.888000] SELinux:  Disabled at boot.
[17179570.888000] Mount-cache hash table entries: 512
[17179570.888000] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000
[17179570.888000] CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000
[17179570.888000] monitor/mwait feature present.
[17179570.888000] using mwait in idle threads.
[17179570.888000] CPU: L1 I cache: 32K, L1 D cache: 32K
[17179570.888000] CPU: L2 cache: 2048K
[17179570.888000] CPU: Hyper-Threading is disabled
[17179570.888000] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000140 0000c189 00000000 00000000
[17179570.888000] Checking 'hlt' instruction... OK.
[17179570.904000] SMP alternatives: switching to UP code
[17179570.904000] checking if image is initramfs... it is
[17179572.044000] Freeing initrd memory: 5563k freed
[17179572.044000] ACPI: Core revision 20060707
[17179572.044000] ACPI: Looking for DSDT ... not found!
[17179572.064000] CPU0: Intel Genuine Intel(R) CPU           T2050  @ 1.60GHz stepping 08
[17179572.064000] SMP alternatives: switching to SMP code
[17179572.064000] Booting processor 1/1 eip 3000
[17179572.076000] Initializing CPU#1
[17179572.156000] Calibrating delay using timer specific routine.. 3192.44 BogoMIPS (lpj=6384886)
[17179572.156000] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000
[17179572.156000] CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000
[17179572.156000] monitor/mwait feature present.
[17179572.156000] CPU: L1 I cache: 32K, L1 D cache: 32K
[17179572.156000] CPU: L2 cache: 2048K
[17179572.156000] CPU: Hyper-Threading is disabled
[17179572.156000] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000140 0000c189 00000000 00000000
[17179572.156000] CPU1: Intel Genuine Intel(R) CPU           T2050  @ 1.60GHz stepping 08
[17179572.156000] Total of 2 processors activated (6390.04 BogoMIPS).
[17179572.156000] ENABLING IO-APIC IRQs
[17179572.156000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[17179572.300000] checking TSC synchronization across 2 CPUs: passed.
[17179572.304000] Brought up 2 CPUs
[17179572.664000] migration_cost=8000
[17179572.664000] NET: Registered protocol family 16
[17179572.664000] EISA bus registered
[17179572.664000] ACPI: bus type pci registered
[17179572.664000] PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
[17179572.664000] PCI: Not using MMCONFIG.
[17179572.664000] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[17179572.664000] PCI: Using configuration type 1
[17179572.664000] Setting up standard PCI resources
[17179572.740000] ACPI: Interpreter enabled
[17179572.740000] ACPI: Using IOAPIC for interrupt routing
[17179572.740000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179572.740000] PCI: Probing PCI hardware (bus 00)
[17179572.744000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
[17179572.744000] Boot video device is 0000:01:00.0
[17179572.748000] PCI: Transparent bridge - 0000:00:1e.0
[17179572.748000] PCI: Bus #05 (-#08) is hidden behind transparent bridge #04 (-#05) (try 'pci=assign-busses')
[17179572.748000] Please report the result to linux-kernel to fix this permanently
[17179572.748000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179572.780000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[17179572.780000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[17179572.784000] ACPI: Embedded Controller [EC0] (gpe 28) interrupt mode.
[17179572.788000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[17179572.792000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[17179572.796000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11 12)
[17179572.796000] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 12)
[17179572.796000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7 12)
[17179572.796000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 12)
[17179572.796000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 12) *0, disabled.
[17179572.800000] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 12)
[17179572.800000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 *6 7 12)
[17179572.800000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 12)
[17179572.800000] ACPI: Power Resource [GFAN] (off)
[17179572.800000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179572.800000] pnp: PnP ACPI init
[17179572.804000] pnp: PnP ACPI: found 14 devices
[17179572.804000] PnPBIOS: Disabled by ACPI PNP
[17179572.804000] PCI: Using ACPI for IRQ routing
[17179572.804000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[17179572.824000] pnp: 00:0b: ioport range 0x400-0x41f has been reserved
[17179572.824000] PCI: Bridge: 0000:00:01.0
[17179572.824000]   IO window: disabled.
[17179572.824000]   MEM window: f9f00000-fdffffff
[17179572.824000]   PREFETCH window: bdf00000-ddefffff
[17179572.824000] PCI: Bridge: 0000:00:1c.0
[17179572.824000]   IO window: c000-cfff
[17179572.824000]   MEM window: fe000000-fe0fffff
[17179572.824000]   PREFETCH window: disabled.
[17179572.824000] PCI: Bridge: 0000:00:1c.3
[17179572.824000]   IO window: disabled.
[17179572.824000]   MEM window: fe100000-fe1fffff
[17179572.824000]   PREFETCH window: disabled.
[17179572.824000] PCI: Bus 5, cardbus bridge: 0000:04:01.0
[17179572.824000]   IO window: 0000d000-0000d0ff
[17179572.824000]   IO window: 0000d400-0000d4ff
[17179572.824000]   PREFETCH window: 50000000-51ffffff
[17179572.824000]   MEM window: 52000000-53ffffff
[17179572.824000] PCI: Bridge: 0000:00:1e.0
[17179572.824000]   IO window: d000-dfff
[17179572.824000]   MEM window: fe200000-feafffff
[17179572.824000]   PREFETCH window: ddf00000-dfefffff
[17179572.824000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179572.824000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179572.824000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179572.824000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[17179572.824000] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 177
[17179572.824000] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[17179572.824000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[17179572.824000] ACPI: PCI Interrupt 0000:04:01.0[A] -> GSI 17 (level, low) -> IRQ 185
[17179572.824000] NET: Registered protocol family 2
[17179572.876000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179572.876000] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[17179572.876000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[17179572.876000] TCP: Hash tables configured (established 131072 bind 65536)
[17179572.876000] TCP reno registered
[17179572.876000] Simple Boot Flag at 0x52 set to 0x1
[17179572.880000] audit: initializing netlink socket (disabled)
[17179572.880000] audit(1162035725.880:1): initialized
[17179572.880000] highmem bounce pool size: 64 pages
[17179572.880000] VFS: Disk quotas dquot_6.5.1
[17179572.880000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179572.880000] Initializing Cryptographic API
[17179572.880000] io scheduler noop registered
[17179572.880000] io scheduler anticipatory registered
[17179572.880000] io scheduler deadline registered
[17179572.880000] io scheduler cfq registered (default)
[17179572.880000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179572.880000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179572.880000] assign_interrupt_mode Found MSI capability
[17179572.880000] Allocate Port Service[0000:00:01.0:pcie00]
[17179572.880000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179572.880000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[17179572.880000] assign_interrupt_mode Found MSI capability
[17179572.880000] Allocate Port Service[0000:00:1c.0:pcie00]
[17179572.880000] Allocate Port Service[0000:00:1c.0:pcie02]
[17179572.880000] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 177
[17179572.880000] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[17179572.880000] assign_interrupt_mode Found MSI capability
[17179572.880000] Allocate Port Service[0000:00:1c.3:pcie00]
[17179572.880000] Allocate Port Service[0000:00:1c.3:pcie02]
[17179572.880000] isapnp: Scanning for PnP cards...
[17179573.236000] isapnp: No Plug & Play device found
[17179573.276000] Real Time Clock Driver v1.12ac
[17179573.276000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[17179573.276000] mice: PS/2 mouse device common for all mice
[17179573.280000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179573.280000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179573.280000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179573.280000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[17179573.280000] i8042.c: Detected active multiplexing controller, rev 1.1.
[17179573.284000] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[17179573.284000] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[17179573.284000] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[17179573.284000] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[17179573.284000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179573.284000] EISA: Probing bus 0 at eisa.0
[17179573.284000] EISA: Detected 0 cards.
[17179573.284000] TCP bic registered
[17179573.284000] NET: Registered protocol family 1
[17179573.284000] NET: Registered protocol family 8
[17179573.284000] NET: Registered protocol family 20
[17179573.284000] Starting balanced_irq
[17179573.284000] Using IPI No-Shortcut mode
[17179573.284000] ACPI: (supports S0 S1 S3 S4 S5)
[17179573.284000] Freeing unused kernel memory: 308k freed
[17179573.444000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179574.440000] Capability LSM initialized
[17179574.496000] ACPI: Transitioning device [FN00] to D3
[17179574.496000] ACPI: Transitioning device [FN00] to D3
[17179574.496000] ACPI: Fan [FN00] (off)
[17179574.504000] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [   AMI] OemTableId [  CPU1PM] [20060707]
[17179574.504000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[17179574.504000] ACPI: Processor [CPU1] (supports 8 throttling states)
[17179574.504000] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [   AMI] OemTableId [  CPU2PM] [20060707]
[17179574.504000] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[17179574.504000] ACPI: Processor [CPU2] (supports 8 throttling states)
[17179574.516000] ACPI: Thermal Zone [THRM] (29 C)
[17179575.160000] ICH7: IDE controller at PCI slot 0000:00:1f.1
[17179575.160000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 225
[17179575.160000] ICH7: chipset revision 2
[17179575.160000] ICH7: not 100% native mode: will probe irqs later
[17179575.160000]     ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
[17179575.160000] Probing IDE interface ide0...
[17179575.448000] hda: HTS421212H9AT00, ATA DISK drive
[17179575.896000] hdb: TSSTcorpCD/DVDW TS-L632D, ATAPI CD/DVD-ROM drive
[17179575.952000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179576.368000] hda: max request size: 512KiB
[17179576.368000] hda: 234441648 sectors (120034 MB) w/7528KiB Cache, CHS=16383/255/63, UDMA(100)
[17179576.368000] hda: cache flushes supported
[17179576.368000]  hda: hda1 hda2 hda3 < hda5 hda6 > hda4
[17179576.468000] hdb: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
[17179576.468000] Uniform CD-ROM driver Revision: 3.20
[17179577.212000] usbcore: registered new driver usbfs
[17179577.216000] usbcore: registered new driver hub
[17179577.264000] Probing IDE interface ide1...
[17179577.264000] USB Universal Host Controller Interface driver v3.0
[17179577.268000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 233
[17179577.268000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[17179577.268000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[17179577.268000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[17179577.268000] uhci_hcd 0000:00:1d.0: irq 233, io base 0x0000ec00
[17179577.268000] usb usb1: configuration #1 chosen from 1 choice
[17179577.268000] hub 1-0:1.0: USB hub found
[17179577.268000] hub 1-0:1.0: 2 ports detected
[17179577.288000] ieee1394: Initialized config rom entry `ip1394'
[17179577.372000] ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 177
[17179577.372000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[17179577.372000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[17179577.372000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[17179577.372000] uhci_hcd 0000:00:1d.1: irq 177, io base 0x0000e880
[17179577.372000] usb usb2: configuration #1 chosen from 1 choice
[17179577.372000] hub 2-0:1.0: USB hub found
[17179577.372000] hub 2-0:1.0: 2 ports detected
[17179577.476000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 225
[17179577.476000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[17179577.476000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[17179577.476000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[17179577.476000] uhci_hcd 0000:00:1d.2: irq 225, io base 0x0000e800
[17179577.476000] usb usb3: configuration #1 chosen from 1 choice
[17179577.476000] hub 3-0:1.0: USB hub found
[17179577.476000] hub 3-0:1.0: 2 ports detected
[17179577.580000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 22 (level, low) -> IRQ 50
[17179577.580000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[17179577.580000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[17179577.580000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[17179577.580000] uhci_hcd 0000:00:1d.3: irq 50, io base 0x0000e480
[17179577.580000] usb usb4: configuration #1 chosen from 1 choice
[17179577.580000] hub 4-0:1.0: USB hub found
[17179577.580000] hub 4-0:1.0: 2 ports detected
[17179577.612000] usb 1-2: new low speed USB device using uhci_hcd and address 2
[17179577.684000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 233
[17179577.684000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[17179577.684000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[17179577.684000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[17179577.684000] ehci_hcd 0000:00:1d.7: debug port 1
[17179577.684000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[17179577.684000] ehci_hcd 0000:00:1d.7: irq 233, io mem 0xfebfbc00
[17179577.688000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179577.688000] usb usb5: configuration #1 chosen from 1 choice
[17179577.688000] hub 5-0:1.0: USB hub found
[17179577.688000] hub 5-0:1.0: 8 ports detected
[17179577.792000] ACPI: PCI Interrupt 0000:04:01.1[b] -> GSI 18 (level, low) -> IRQ 225
[17179577.844000] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[225]  MMIO=[feaff800-feafffff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[17179577.940000] Attempting manual resume
[17179578.016000] kjournald starting.  Commit interval 5 seconds
[17179578.016000] EXT3-fs: mounted filesystem with ordered data mode.
[17179578.136000] usb 1-2: device not accepting address 2, error -71
[17179579.056000] usb 5-7: new high speed USB device using ehci_hcd and address 4
[17179579.124000] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00e018000361272a]
[17179579.188000] usb 5-7: configuration #1 chosen from 1 choice
[17179579.428000] usb 1-2: new low speed USB device using uhci_hcd and address 4
[17179579.608000] usb 1-2: configuration #1 chosen from 1 choice
[17179579.852000] usb 3-2: new full speed USB device using uhci_hcd and address 2
[17179580.092000] usb 3-2: configuration #1 chosen from 1 choice
[17179589.736000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179589.744000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179590.164000] input: PC Speaker as /class/input/input1
[17179590.176000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179590.176000] PCI: Setting latency timer of device 0000:02:00.0 to 64
[17179590.176000] eth0: Identified chip type is 'RTL8168B/8111B'.
[17179590.176000] eth0: r10001.02, the Linux device driver for Realtek Ethernet Controllers at 0xc800, 00:17:31:f6:a3:be, IRQ 169
[17179590.180000] eth0: Auto-negotiation Enabled.
[17179597.864000] Realtek RTL8168/8111 Family PCI-E Gigabit Ethernet Network Adapter
[17179597.864000] Driver version:1.02
[17179597.864000] Released date:2006/02/23
[17179597.864000] Link Status:Not Linked
[17179597.864000] I/O Base:0xC800(I/O port)
[17179597.864000] IRQ:169
[17179597.864000] hw_random hardware driver 1.0.0 loaded
[17179598.340000] usbcore: registered new driver hiddev
[17179598.440000] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /class/input/input2
[17179598.440000] input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.0-2
[17179598.440000] usbcore: registered new driver usbhid
[17179598.440000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17179598.552000] ieee80211_crypt: registered algorithm 'NULL'
[17179598.552000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[17179598.552000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[17179598.636000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 58
[17179598.636000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[17179599.180000] Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008
[17179599.216000] input: SynPS/2 Synaptics TouchPad as /class/input/input3
[17179599.252000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.1.0mp
[17179599.252000] ipw3945: Copyright(c) 2003-2006 Intel Corporation
[17179599.396000] Linux agpgart interface v0.101 (c) Dave Jones
[17179599.472000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 19 (level, low) -> IRQ 177
[17179599.472000] PCI: Setting latency timer of device 0000:03:00.0 to 64
[17179599.472000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[17179599.508000] ts: Compaq touchscreen protocol output
[17179599.708000] Bluetooth: Core ver 2.8
[17179599.708000] NET: Registered protocol family 31
[17179599.708000] Bluetooth: HCI device and connection manager initialized
[17179599.708000] Bluetooth: HCI socket layer initialized
[17179599.760000] Bluetooth: HCI USB driver ver 2.9
[17179599.764000] usbcore: registered new driver hci_usb
[17179599.848000] agpgart: Detected an Intel 945GM Chipset.
[17179599.872000] agpgart: AGP aperture is 256M @ 0x0
[17179599.876000] ACPI: PCI Interrupt 0000:04:01.0[A] -> GSI 17 (level, low) -> IRQ 185
[17179599.876000] Yenta: CardBus bridge found at 0000:04:01.0 [1043:1237]
[17179599.976000] sdhci: Secure Digital Host Controller Interface driver, 0.12
[17179599.976000] sdhci: Copyright(c) Pierre Ossman
[17179600.004000] Yenta: ISA IRQ mask 0x0cb8, PCI irq 185
[17179600.004000] Socket status: 30000006
[17179600.004000] Yenta: Raising subordinate bus# of parent bus (#04) from #05 to #08
[17179600.004000] pcmcia: parent PCI bridge I/O window: 0xd000 - 0xdfff
[17179600.004000] cs: IO port probe 0xd000-0xdfff: clean.
[17179600.004000] pcmcia: parent PCI bridge Memory window: 0xfe200000 - 0xfeafffff
[17179600.004000] pcmcia: parent PCI bridge Memory window: 0xddf00000 - 0xdfefffff
[17179600.088000] sdhci: SDHCI controller found at 0000:04:01.2 [1180:0822] (rev 17)
[17179600.088000] ACPI: PCI Interrupt 0000:04:01.2[C] -> GSI 19 (level, low) -> IRQ 177
[17179600.088000] mmc0: SDHCI at 0xfeaff400 irq 177 DMA
[17179600.480000] cs: IO port probe 0x100-0x3af: clean.
[17179600.480000] cs: IO port probe 0x3e0-0x4ff: excluding 0x480-0x4bf 0x4d0-0x4d7
[17179600.480000] cs: IO port probe 0x820-0x8ff: excluding 0x830-0x87f
[17179600.484000] cs: IO port probe 0xc00-0xcf7: clean.
[17179600.484000] cs: IO port probe 0xa00-0xaff: clean.
[17179600.652000] lp: driver loaded but no devices found
[17179600.712000] SCSI subsystem initialized
[17179600.716000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[17179600.716000] ieee1394: sbp2: Try serialize_io=0 for better performance
[17179600.760000] Adding 554192k swap on /dev/hda5.  Priority:-1 extents:1 across:554192k
[17179600.848000] EXT3 FS on hda4, internal journal
[17179601.096000] kjournald starting.  Commit interval 5 seconds
[17179601.108000] EXT3 FS on hda6, internal journal
[17179601.108000] EXT3-fs: mounted filesystem with ordered data mode.
[17179601.540000] ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
[17179601.932000] ieee80211_crypt: registered algorithm 'WEP'
[17179602.816000] NET: Registered protocol family 17
[17179606.772000] ACPI: AC Adapter [AC0] (off-line)
[17179606.804000] Asus Laptop ACPI Extras version 0.30
[17179606.804000]   unsupported model A6JC, trying default values
[17179606.804000]   send /proc/acpi/dsdt to the developers
[17179606.900000] ACPI: Battery Slot [BAT0] (battery present)
[17179606.932000] ACPI: Power Button (FF) [PWRF]
[17179606.932000] ACPI: Lid Switch [LID]
[17179606.932000] ACPI: Power Button (CM) [PWRB]
[17179606.932000] ACPI: Sleep Button (CM) [SLPB]
[17179607.164000] ibm_acpi: ec object not found
[17179607.216000] pcc_acpi: loading...
[17179607.424000] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[17179608.044000] capifs: Rev 1.1.2.3
[17179610.840000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[17179610.840000] apm: disabled - APM is not SMP safe.
[17179614.300000] NET: Registered protocol family 10
[17179614.300000] lo: Disabled Privacy Extensions
[17179614.300000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[17179614.300000] IPv6 over IPv4 tunneling driver
[17179616.512000] Bluetooth: L2CAP ver 2.8
[17179616.512000] Bluetooth: L2CAP socket layer initialized
[17179616.604000] Bluetooth: RFCOMM socket layer initialized
[17179616.604000] Bluetooth: RFCOMM TTY layer initialized
[17179616.604000] Bluetooth: RFCOMM ver 1.7
[17180062.796000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[17180125.160000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[17180127.424000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[17180138.328000] eth1: no IPv6 routers present
[17180159.096000] eth1: no IPv6 routers present
[17180852.488000] eth1: no IPv6 routers present
[17180907.800000] eth0: no IPv6 routers present
[17180972.296000] eth0: no IPv6 routers present
[17181041.508000] eth0: no IPv6 routers present
[17181159.944000] eth0: no IPv6 routers present

bapoumba · Le 28/10/2006, à 13:17

Déplacé dans Internet.

fanatux · Le 28/10/2006, à 13:21

ok no pb...

fanatux · Le 28/10/2006, à 13:35

SA MARCHE!!!
Je ne sait pas trop comment j'ai fait mais a force de bidouillage sa marche!!!! ouf, j'ai failli laisser tomber!! sa fait plaisir!!!

Merci de votre aide,vraiment!! en esperant pouvoir vous etre utile une autre fois!!

queremospaz · Le 28/10/2006, à 16:05

fanatux a écrit :

SA MARCHE!!!

Salut,

t'aurais, ne serais ce, qu'une toute petite idée de ce que tu as fait ? G le meme probleme, mais meme avec des bidouillages et surtout sans connection sur le pc en question, je galere bien !

fanatux · Le 28/10/2006, à 20:35

J'ai trouvé ce que j'ai fait (desolé j'ai pas fait expres...)
J'avai pas misles majuscules dans le nom du réseau... J'ai reinstallé edgy et en reconfigurant internet, j'ai mis le bon nom de reseau (qui n'apparraissai pas dans la liste de l'outil "reseau") et sa a marché directement!!

jjack · Le 07/12/2006, à 21:33

salut
j'ai un pbm avec ma carte wifi cisco...
j'aimerais m'affranchir de Windows,mais dur dur la marche est haute.

Ma carte

00.05.0 Network controller: AIRONET; Communications Cisco Aironet Wireless 802.11b

Dans ifconfig j'ai eth0, eth1 et wifi0..
dans l'assisant réseau, j'ai eth1 et wifi0 en connection sans fil ???
et eth0 en connexion filaire...
si vous avez une idée je suis preneur

Merci

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 26/10/2006, à 19:26

[RESOLU]Pb de connexion wifi...

#2 Le 26/10/2006, à 19:52

Re : [RESOLU]Pb de connexion wifi...

#3 Le 26/10/2006, à 19:52

Re : [RESOLU]Pb de connexion wifi...

#4 Le 26/10/2006, à 20:01

Re : [RESOLU]Pb de connexion wifi...

#5 Le 26/10/2006, à 20:09

Re : [RESOLU]Pb de connexion wifi...

#6 Le 26/10/2006, à 21:29

Re : [RESOLU]Pb de connexion wifi...

#7 Le 27/10/2006, à 00:10

Re : [RESOLU]Pb de connexion wifi...

#8 Le 27/10/2006, à 00:12

Re : [RESOLU]Pb de connexion wifi...

#9 Le 27/10/2006, à 00:25

Re : [RESOLU]Pb de connexion wifi...

#10 Le 27/10/2006, à 12:47

Re : [RESOLU]Pb de connexion wifi...

#11 Le 27/10/2006, à 16:15

Re : [RESOLU]Pb de connexion wifi...

#12 Le 27/10/2006, à 17:13

Re : [RESOLU]Pb de connexion wifi...

#13 Le 28/10/2006, à 13:14

Re : [RESOLU]Pb de connexion wifi...

#14 Le 28/10/2006, à 13:17

Re : [RESOLU]Pb de connexion wifi...

#15 Le 28/10/2006, à 13:21

Re : [RESOLU]Pb de connexion wifi...

#16 Le 28/10/2006, à 13:35

Re : [RESOLU]Pb de connexion wifi...

#17 Le 28/10/2006, à 16:05

Re : [RESOLU]Pb de connexion wifi...

#18 Le 28/10/2006, à 20:35

Re : [RESOLU]Pb de connexion wifi...

#19 Le 07/12/2006, à 21:33

Re : [RESOLU]Pb de connexion wifi...

Pied de page des forums