Pages : 1
#1 Le 24/12/2011, à 18:40
- JWinnfield
Carte Z-Com XG-703a non détectée (Ndiswrapper)
Bonjour,
j'ai installé Ubuntu 11.10 il y a peu, après avoir galéré pour faire marcher le wifi avec une carte réseau incompatible (Z-Com XG-703a) j'avais finalement réussi à manipuler ndiswrapper pour le faire fonctionner. Seulement je n'ai pas du tout noter la manipulation exacte à effectuer et après installation de xubuntu hier je ne parviens plus à faire fonctionner le wifi. J'ai installé ndiswrapper depuis le cd d'installation (je ne peux pas me connecter à un cable ethernet), installé le driver, bref j'ai respecté la manoeuvre indiquée ici mais rien n'y fait iwconfig retourne toujours le résultat suivant :
lo no wireless extensions.
eth0 no wireless extensions.
Voici les commandes concernant le wifi, je ne sais pas si elles sont toutes utiles, je suis débutant... :
cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=11.10
DISTRIB_CODENAME=oneiric
DISTRIB_DESCRIPTION="Ubuntu 11.10"
lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 0cde:0008 Z-Com XG-703A 802.11g Wireless Adapter [Intersil ISL3887]
Bus 002 Device 002: ID 045e:00d1 Microsoft Corp. Optical Mouse with Tilt Wheel
Bus 004 Device 002: ID 058f:9360 Alcor Micro Corp. 8-in-1 Media Card Reader
Bus 002 Device 004: ID 07ab:fcc7 Freecom Technologies
lspci
00:00.0 Host bridge: ATI Technologies Inc Radeon Xpress 200 Host Bridge (rev 01)
00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:19.0 PCI bridge: ALi Corporation M5249 HTT to PCI Bridge
00:1c.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
00:1c.1 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
00:1c.2 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
00:1c.3 USB Controller: ALi Corporation USB 2.0 Controller (rev 01)
00:1d.0 Audio device: ALi Corporation High Definition Audio/AC'97 Host Controller
00:1e.0 ISA bridge: ALi Corporation PCI to LPC Controller (rev 31)
00:1e.1 Bridge: ALi Corporation M7101 Power Management Controller [PMU]
00:1f.0 IDE interface: ALi Corporation M5229 IDE (rev c7)
00:1f.1 RAID bus controller: ALi Corporation ULi 5287 SATA (rev 02)
01:05.0 VGA compatible controller: ATI Technologies Inc RC410 [Radeon Xpress 200]
02:15.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller (rev 13)
02:16.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev 80)
lspci -nn | grep -i net
02:15.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller [11ab:4320] (rev 13)
sudo lshw -C network
*-network
description: Ethernet interface
product: 88E8001 Gigabit Ethernet Controller
vendor: Marvell Technology Group Ltd.
physical id: 15
bus info: pci@0000:02:15.0
logical name: eth0
version: 13
serial: 00:16:ec:b4:07:0e
capacity: 1Gbit/s
width: 32 bits
clock: 66MHz
capabilities: pm vpd bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=skge driverversion=1.13 firmware=N/A latency=64 link=yes maxlatency=31 mingnt=23 multicast=yes port=twisted pair
resources: irq:20 memory:ff5fc000-ff5fffff ioport:c800(size=256) memory:ff5c0000-ff5dffff
lsmod
Module Size Used by
ndiswrapper 254773 0
ppdev 17113 0
rfcomm 47946 4
bnep 18436 2
bluetooth 166112 10 rfcomm,bnep
snd_hda_codec_realtek 330769 1
snd_hda_intel 33390 3
snd_hda_codec 104802 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 13668 1 snd_hda_codec
snd_pcm 96755 2 snd_hda_intel,snd_hda_codec
snd_seq_midi 13324 0
snd_rawmidi 30547 1 snd_seq_midi
snd_seq_midi_event 14899 1 snd_seq_midi
snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event
snd_timer 29991 2 snd_pcm,snd_seq
snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq
snd 68266 15 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
radeon 1015995 2
soundcore 12680 1 snd
i2c_ali15x3 13030 0
i2c_ali1535 12905 0
snd_page_alloc 18529 2 snd_hda_intel,snd_pcm
parport_pc 36962 1
ttm 76805 1 radeon
drm_kms_helper 42558 1 radeon
drm 236330 4 radeon,ttm,drm_kms_helper
i2c_algo_bit 13423 1 radeon
shpchp 37345 0
lp 17799 0
parport 46562 3 ppdev,parport_pc,lp
usb_storage 57901 1
usbhid 47198 0
uas 18027 0
hid 95463 1 usbhid
sata_uli 12834 2
pata_ali 13882 0
floppy 70365 0
skge 49902 0
firewire_ohci 40722 0
firewire_core 63626 1 firewire_ohci
crc_itu_t 12707 1 firewire_core
ifconfig
eth0 Link encap:Ethernet HWaddr 00:16:ec:b4:07:0e
adr inet6: fe80::216:ecff:feb4:70e/64 Scope:Lien
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:0 (0.0 B) Octets transmis:0 (0.0 B)
Interruption:20
lo Link encap:Boucle locale
inet adr:127.0.0.1 Masque:255.0.0.0
adr inet6: ::1/128 Scope:Hôte
UP LOOPBACK RUNNING MTU:16436 Metric:1
Packets reçus:16 erreurs:0 :0 overruns:0 frame:0
TX packets:16 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:0
Octets reçus:1296 (1.2 KB) Octets transmis:1296 (1.2 KB)
sudo iwlist scan
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
uname -r -m
3.0.0-12-generic x86_64
cat /etc/network/interfaces
auto lo
iface lo inet loopback
nm-tool
NetworkManager Tool
State: disconnected
- Device: eth0 -----------------------------------------------------------------
Type: Wired
Driver: skge
State: disconnected
Default: no
HW Address: 00:16:EC:B4:07:0E
Capabilities:
Carrier Detect: yes
Wired Properties
Carrier: on
En ce qui concerne ndiswrapper la commande ndiswrapper -l retourne ceci :
wlanuig : driver installed
device (0CDE:0008) present (alternate driver: p54usb)
J'ai suivi le tuto et je n'arrive pas à comprendre pourquoi je n'obtiens pas le même résultat qu'auparavant...
D'avance merci de votre aide!
Dernière modification par JWinnfield (Le 03/01/2012, à 17:19)
Hors ligne
#2 Le 01/01/2012, à 14:52
- JWinnfield
Re : Carte Z-Com XG-703a non détectée (Ndiswrapper)
up
Quelqu'un pourrait m'aider?
Hors ligne
#3 Le 03/01/2012, à 17:32
- JWinnfield
Re : Carte Z-Com XG-703a non détectée (Ndiswrapper)
up
Hors ligne
#4 Le 12/01/2012, à 22:59
- kikislater
Re : Carte Z-Com XG-703a non détectée (Ndiswrapper)
Même problème !
Hors ligne
#5 Le 12/01/2012, à 23:52
- kikislater
Re : Carte Z-Com XG-703a non détectée (Ndiswrapper)
Résolu : La solution est d'installer le paquet linux-firmware-nonfree et de redémarrer
Testé avec Philips CPWUA054 t clé usb Sagem 703a
Hors ligne
Pages : 1