Pages : 1
#1 Le 01/02/2007, à 15:14
- awala
[RESOLU] Ecran login/mot de passe
bonjour tout le monde
c'est juste pour exposer un tout petit problème de rien du tout...
je suis sous dapper avec une carte nvidia 6600gt, univers gnome, drivers nvidia 9746 installés et une résolution 1440x900 (écran lcd 19 pouces) en 60 hz
quand je démarre mon ordi, j'arrive sur l'écran de login/mdp mais je n'ai pas toute la "page"... pour voir les options session et autre il faut que je glisse la souris et l'écran défile (je ne sais pas si je suis clair...)
cependant une fois connecté à ma session l'écran est normal avec la résolution choisie...
voila comment arranger cela
merci
awala
Dernière modification par awala (Le 01/02/2007, à 23:52)
Laptop Toshiba P200-1D0 sous karmic
Laptop Asus eeepc sous jaunty
Hors ligne
#2 Le 01/02/2007, à 17:15
- LittleCj3k
Re : [RESOLU] Ecran login/mot de passe
bonjour, il suffit de supprimer la resolution qui s'affiche pour gdm dans ton xorg.conf
Hors ligne
#3 Le 01/02/2007, à 21:43
- awala
Re : [RESOLU] Ecran login/mot de passe
bonsoir
merci de m'aider mais où est-ce ?
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder3) Fri Dec 15 10:12:14 PST 2006
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "Files"
# path to defoma fonts
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbVariant" "latin9"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Monitor"
Identifier "Generic Monitor"
HorizSync 30-83
VertRefresh 56-76
Option "DPMS"
Modeline "1440x900_75.00" 136.49 1440 1536 1688 1936 900 901 904 940 -HSync +Vsync
EndSection
Section "Device"
Identifier "NVIDIA Corporation NV43 [GeForce 6600/GeForce 6600 GT]"
Driver "nvidia"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NV43 [GeForce 6600/GeForce 6600 GT]"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1440x900_75.00" "1280x1024" "1024x768" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1440x900_75.00" "1280x1024" "1024x768" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1440x900_75.00" "1280x1024" "1024x768" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1440x900_75.00" "1280x1024" "1024x768" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1440x900_75.00" "1280x1024" "1024x768" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1440x900_75.00" "1280x1024" "1024x768" "800x600" "720x400" "640x480"
EndSubSection
EndSection
awala
Laptop Toshiba P200-1D0 sous karmic
Laptop Asus eeepc sous jaunty
Hors ligne
#4 Le 01/02/2007, à 23:52
- awala
Re : [RESOLU] Ecran login/mot de passe
probleme résolu en faisant un nouveau xorg voici le nouveau :
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder3) Fri Dec 15 10:12:14 PST 2006
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "Files"
# path to defoma fonts
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbVariant" "latin9"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Monitor"
Identifier "Generic Monitor"
HorizSync 30-83
VertRefresh 56-76
Option "DPMS"
Modeline "1440x900_75.00" 136.49 1440 1536 1688 1936 900 901 904 940 -HSync +Vsync
EndSection
Section "Device"
Identifier "NVIDIA Corporation NV43 [GeForce 6600/GeForce 6600 GT]"
Driver "nvidia"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NV43 [GeForce 6600/GeForce 6600 GT]"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1440x900_75.00"
EndSubSection
SubSection "Display"
Depth 4
Modes "1440x900_75.00"
EndSubSection
SubSection "Display"
Depth 8
Modes "1440x900_75.00"
EndSubSection
SubSection "Display"
Depth 15
Modes "1440x900_75.00"
EndSubSection
SubSection "Display"
Depth 16
Modes "1440x900_75.00"
EndSubSection
SubSection "Display"
Depth 24
Modes "1440x900_75.00"
EndSubSection
EndSection
Laptop Toshiba P200-1D0 sous karmic
Laptop Asus eeepc sous jaunty
Hors ligne
#5 Le 15/02/2007, à 12:55
- ferreol
Re : [RESOLU] Ecran login/mot de passe
j ai le meme problème mais j utilise Kde , je suppose que la methode est la même .
donc dans ton Xorg.conf tu as juste virer les autres résolutions dans la section Screen ,c est bien cela ?
Hors ligne
#6 Le 15/02/2007, à 13:12
- ebrain
Re : [RESOLU] Ecran login/mot de passe
Voilà le diff entre les deux fichiers :
128c128
< Modes "1440x900_75.00" "1280x1024" "1024x768" "800x600" "720x400" "640x480"
---
> Modes "1440x900_75.00"
132c132
< Modes "1440x900_75.00" "1280x1024" "1024x768" "800x600" "720x400" "640x480"
---
> Modes "1440x900_75.00"
136c136
< Modes "1440x900_75.00" "1280x1024" "1024x768" "800x600" "720x400" "640x480"
---
> Modes "1440x900_75.00"
140c140
< Modes "1440x900_75.00" "1280x1024" "1024x768" "800x600" "720x400" "640x480"
---
> Modes "1440x900_75.00"
144c144
< Modes "1440x900_75.00" "1280x1024" "1024x768" "800x600" "720x400" "640x480"
---
> Modes "1440x900_75.00"
148c148
< Modes "1440x900_75.00" "1280x1024" "1024x768" "800x600" "720x400" "640x480"
---
> Modes "1440x900_75.00"Donc comme tu vois, il n'y a en effet que les résolutions de la section screen qui ont sauté 
.
@+
Le Blender Clan, site communautaire francophone Blender :: www.blenderclan.org ::
Hors ligne
#7 Le 15/02/2007, à 13:29
- ferreol
Re : [RESOLU] Ecran login/mot de passe
ok cool
Hors ligne