#1 Le 09/02/2007, à 12:28
- Thibaud
[Xorg]Impossibilité d'utiliser le driver neomagic
Bonjour !
J'utilise edgy avec une carte neomagic pci NM2160 MagicGraph 128XD, normalement supportée par X.
Mais là, impossible d'utiliser ce driver : X me propose d'utiliser vesa à la place, qui fonctionne mais avec quelques inconvénients : problèmes de contraste, d'hibernation, de mise en place du serveur X, d'utilisation des performances de ma carte vidéo...
J'ai installé X à partir d'une version serveur, donc j'ai peut-être oublié quelque chose ?
Pour installer X, j'ai fait :
# apt-get install xorg xserver-xorg gsfonts-x11 msttcorefonts x-window-system
De plus, j'ai des problèmes de fonts :
Could not init font path element /usr/share/fonts/X11/TTF et aussi OTF et CID
Enfin j'ai cette erreur :
FreeFontPath: FPE "/usr/share/X11/fonts/misc" refount is 2, should be 1; fixing
J'ai bien xserver-xorg-video-neomagic d'installé.
Des idées ?
Merci d'avance,
Thibaud.
Bienvenue sur mon site perso : http://thibaud.hulin.free.fr/dokuwiki
Pour l'utilisabilité et l'ergonomie des logiciels libres : http://ergolibre.tuxfamily.org
Apprentissage libre des langues : http://polyglotte.tuxfamily.org et http://www.akademia.ch/websites/ergolang/
Hors ligne
#2 Le 09/02/2007, à 12:34
- loloemr
Re : [Xorg]Impossibilité d'utiliser le driver neomagic
Le fichier de log de X te dit quoi ?
cat /var/log/Xorg.0.log | grep "(EE)"Dernière modification par loloemr (Le 09/02/2007, à 12:37)
L'open source est garant de notre indépendance technologique, permet de créer des emplois locaux et véhiculent deux idées fondamentales : la transparence de l'information et la supériorité de la collaboration sur la concurrence ... GNU/Linux c'est bon mangez-en !!
Hors ligne
#3 Le 09/02/2007, à 12:41
- Thibaud
Re : [Xorg]Impossibilité d'utiliser le driver neomagic
merci de me répondre.
Euh... ta commande ne me donne rien.
Voici le syslog en date d'aujourd'hui :
Feb 9 09:14:38 localhost syslogd 1.4.1#18ubuntu6: restart.
Feb 9 09:14:39 localhost kernel: Inspecting /boot/System.map-2.6.19swsusp2.070206
Feb 9 09:14:40 localhost kernel: Loaded 24504 symbols from /boot/System.map-2.6.19swsusp2.070206.
Feb 9 09:14:40 localhost kernel: Symbols match kernel version 2.6.19.
Feb 9 09:14:40 localhost kernel: No module symbols loaded - kernel modules not enabled.
Feb 9 09:14:40 localhost kernel: [ 0.000000] Linux version 2.6.19swsusp2.070206 (root@Hitachi) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 Tue Feb 6 21:24:14 CET 2007
Feb 9 09:14:40 localhost kernel: [ 0.000000] BIOS-provided physical RAM map:
Feb 9 09:14:40 localhost kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Feb 9 09:14:40 localhost kernel: [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Feb 9 09:14:40 localhost kernel: [ 0.000000] BIOS-e820: 00000000000c0000 - 00000000000cc000 (reserved)
Feb 9 09:14:40 localhost kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 0000000007ff0000 (usable)
Feb 9 09:14:40 localhost kernel: [ 0.000000] BIOS-e820: 0000000007ff0000 - 0000000008000000 (ACPI data)
Feb 9 09:14:40 localhost kernel: [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
Feb 9 09:14:40 localhost kernel: [ 0.000000] 127MB LOWMEM available.
Feb 9 09:14:40 localhost kernel: [ 0.000000] Entering add_active_range(0, 0, 32752) 0 entries of 256 used
Feb 9 09:14:40 localhost kernel: [ 0.000000] Zone PFN ranges:
Feb 9 09:14:40 localhost kernel: [ 0.000000] DMA 0 -> 4096
Feb 9 09:14:40 localhost kernel: [ 0.000000] Normal 4096 -> 32752
Feb 9 09:14:40 localhost kernel: [ 0.000000] early_node_map[1] active PFN ranges
Feb 9 09:14:40 localhost kernel: [ 0.000000] 0: 0 -> 32752
Feb 9 09:14:40 localhost kernel: [ 0.000000] On node 0 totalpages: 32752
Feb 9 09:14:40 localhost kernel: [ 0.000000] DMA zone: 32 pages used for memmap
Feb 9 09:14:40 localhost kernel: [ 0.000000] DMA zone: 0 pages reserved
Feb 9 09:14:40 localhost kernel: [ 0.000000] DMA zone: 4064 pages, LIFO batch:0
Feb 9 09:14:40 localhost kernel: [ 0.000000] Normal zone: 223 pages used for memmap
Feb 9 09:14:40 localhost kernel: [ 0.000000] Normal zone: 28433 pages, LIFO batch:7
Feb 9 09:14:40 localhost kernel: [ 0.000000] DMI 2.3 present.
Feb 9 09:14:40 localhost kernel: [ 0.000000] ACPI: RSDP (v000 DELL ) @ 0x000f3d30
Feb 9 09:14:40 localhost kernel: [ 0.000000] ACPI: RSDT (v001 DELL CP 0x27d10b07 ASL 0x00000061) @ 0x07ff0000
Feb 9 09:14:40 localhost kernel: [ 0.000000] ACPI: FADT (v001 DELL CP 0x27d10b07 ASL 0x00000061) @ 0x07ff0400
Feb 9 09:14:40 localhost kernel: [ 0.000000] ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 MSFT 0x0100000c) @ 0x00000000
Feb 9 09:14:40 localhost kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x808
Feb 9 09:14:40 localhost kernel: [ 0.000000] Allocating PCI resources starting at 10000000 (gap: 08000000:f7e00000)
Feb 9 09:14:40 localhost kernel: [ 0.000000] Detected 233.884 MHz processor.
Feb 9 09:14:40 localhost kernel: [ 17.898098] Built 1 zonelists. Total pages: 32497
Feb 9 09:14:40 localhost kernel: [ 17.898123] Kernel command line: root=UUID=c0808eb9-790a-4a20-a3a2-26a4204d0fb2 ro quiet splash resume2=swap:/dev/hda5
Feb 9 09:14:40 localhost kernel: [ 17.900049] No local APIC present or hardware disabled
Feb 9 09:14:40 localhost kernel: [ 17.900133] mapped APIC to ffffd000 (01101000)
Feb 9 09:14:40 localhost kernel: [ 17.900168] Initializing CPU#0
Feb 9 09:14:40 localhost kernel: [ 17.900460] PID hash table entries: 512 (order: 9, 2048 bytes)
Feb 9 09:14:40 localhost kernel: [ 17.902466] Console: colour VGA+ 80x25
Feb 9 09:14:40 localhost kernel: [ 17.903363] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Feb 9 09:14:40 localhost kernel: [ 17.904536] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Feb 9 09:14:40 localhost kernel: [ 17.937828] Memory: 119272k/131008k available (1972k kernel code, 11232k reserved, 1181k data, 312k init, 0k highmem)
Feb 9 09:14:40 localhost kernel: [ 17.937931] virtual kernel memory layout:
Feb 9 09:14:40 localhost kernel: [ 17.937944] fixmap : 0xfffb6000 - 0xfffff000 ( 292 kB)
Feb 9 09:14:40 localhost kernel: [ 17.937962] vmalloc : 0xc8800000 - 0xfffb4000 ( 887 MB)
Feb 9 09:14:40 localhost kernel: [ 17.937980] lowmem : 0xc0000000 - 0xc7ff0000 ( 127 MB)
Feb 9 09:14:40 localhost kernel: [ 17.937998] .init : 0xc0418000 - 0xc0466000 ( 312 kB)
Feb 9 09:14:40 localhost kernel: [ 17.938016] .data : 0xc02ed29f - 0xc0414954 (1181 kB)
Feb 9 09:14:40 localhost kernel: [ 17.938034] .text : 0xc0100000 - 0xc02ed29f (1972 kB)
Feb 9 09:14:40 localhost kernel: [ 17.938072] Checking if this processor honours the WP bit even in supervisor mode... Ok.
Feb 9 09:14:40 localhost kernel: [ 18.016453] Calibrating delay using timer specific routine.. 468.21 BogoMIPS (lpj=936437)
Feb 9 09:14:40 localhost kernel: [ 18.016763] Security Framework v1.0.0 initialized
Feb 9 09:14:40 localhost kernel: [ 18.016825] SELinux: Disabled at boot.
Feb 9 09:14:40 localhost kernel: [ 18.016938] Mount-cache hash table entries: 512
Feb 9 09:14:40 localhost kernel: [ 18.017986] CPU: After generic identify, caps: 008001bf 00000000 00000000 00000000 00000000 00000000 00000000
Feb 9 09:14:40 localhost kernel: [ 18.018047] Intel Pentium with F0 0F bug - workaround enabled.
Feb 9 09:14:40 localhost kernel: [ 18.018072]
Feb 9 09:14:40 localhost kernel: [ 18.018091] CPU: After all inits, caps: 008001bf 00000000 00000000 00000000 00000000 00000000 00000000
Feb 9 09:14:40 localhost kernel: [ 18.018188] Compat vDSO mapped to ffffe000.
Feb 9 09:14:40 localhost kernel: [ 18.018265] CPU: Intel Mobile Pentium MMX stepping 01
Feb 9 09:14:40 localhost kernel: [ 18.018303] Checking 'hlt' instruction... OK.
Feb 9 09:14:40 localhost kernel: [ 18.032602] ACPI: Core revision 20060707
Feb 9 09:14:40 localhost kernel: [ 18.046010] ACPI: setting ELCR to 0200 (from 0800)
Feb 9 09:14:40 localhost kernel: [ 18.050413] checking if image is initramfs... it is
Feb 9 09:14:40 localhost kernel: [ 24.656627] Freeing initrd memory: 6228k freed
Feb 9 09:14:40 localhost kernel: [ 24.659332] NET: Registered protocol family 16
Feb 9 09:14:40 localhost kernel: [ 24.660247] EISA bus registered
Feb 9 09:14:40 localhost kernel: [ 24.660280] ACPI: bus type pci registered
Feb 9 09:14:40 localhost kernel: [ 24.662179] PCI: PCI BIOS revision 2.10 entry at 0xfbc8e, last bus=0
Feb 9 09:14:40 localhost kernel: [ 24.662205] PCI: Using configuration type 1
Feb 9 09:14:40 localhost kernel: [ 24.662224] Setting up standard PCI resources
Feb 9 09:14:40 localhost kernel: [ 24.755374] ACPI: Interpreter enabled
Feb 9 09:14:40 localhost kernel: [ 24.755404] ACPI: Using PIC for interrupt routing
Feb 9 09:14:40 localhost kernel: [ 24.769631] ACPI: PCI Root Bridge [PCI0] (0000:00)
Feb 9 09:14:40 localhost kernel: [ 24.769684] PCI: Probing PCI hardware (bus 00)
Feb 9 09:14:40 localhost kernel: [ 24.774099] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
Feb 9 09:14:40 localhost kernel: [ 24.894641] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
Feb 9 09:14:40 localhost kernel: [ 24.894664] * this clock source is slow. Consider trying other clock sources
Feb 9 09:14:40 localhost kernel: [ 24.894749] PCI quirk: region 0800-083f claimed by PIIX4 ACPI
Feb 9 09:14:40 localhost kernel: [ 24.894778] PCI quirk: region 0840-084f claimed by PIIX4 SMB
Feb 9 09:14:40 localhost kernel: [ 24.894807] PIIX4 devres B PIO at 00e0-00e7
Feb 9 09:14:40 localhost kernel: [ 24.894830] PIIX4 devres C PIO at 0850-085f
Feb 9 09:14:40 localhost kernel: [ 24.894852] PIIX4 devres G PIO at 0280-0287
Feb 9 09:14:40 localhost kernel: [ 24.894876] PIIX4 devres I PIO at 0210-0217
Feb 9 09:14:40 localhost kernel: [ 24.894899] PIIX4 devres J PIO at 0388-038b
Feb 9 09:14:40 localhost kernel: [ 24.894991] Boot video device is 0000:00:02.0
Feb 9 09:14:40 localhost kernel: [ 24.896082] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Feb 9 09:14:40 localhost kernel: [ 25.245496] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
Feb 9 09:14:40 localhost kernel: [ 25.247929] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Feb 9 09:14:40 localhost kernel: [ 25.250338] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Feb 9 09:14:40 localhost kernel: [ 25.252998] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
Feb 9 09:14:40 localhost kernel: [ 25.267883] ACPI: Power Resource [PADA] (on)
Feb 9 09:14:40 localhost kernel: [ 25.270736] Linux Plug and Play Support v0.97 (c) Adam Belay
Feb 9 09:14:40 localhost kernel: [ 25.270840] pnp: PnP ACPI init
Feb 9 09:14:40 localhost kernel: [ 25.796549] pnp: PnP ACPI: found 18 devices
Feb 9 09:14:40 localhost kernel: [ 25.796588] PnPBIOS: Disabled by ACPI PNP
Feb 9 09:14:40 localhost kernel: [ 25.797193] PCI: Using ACPI for IRQ routing
Feb 9 09:14:40 localhost kernel: [ 25.797229] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Feb 9 09:14:40 localhost kernel: [ 25.838695] pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved
Feb 9 09:14:40 localhost kernel: [ 25.838734] pnp: 00:02: ioport range 0x800-0x805 could not be reserved
Feb 9 09:14:40 localhost kernel: [ 25.838767] pnp: 00:02: ioport range 0x808-0x80f could not be reserved
Feb 9 09:14:40 localhost kernel: [ 25.838821] pnp: 00:03: ioport range 0x806-0x807 has been reserved
Feb 9 09:14:40 localhost kernel: [ 25.838852] pnp: 00:03: ioport range 0x850-0x853 has been reserved
Feb 9 09:14:40 localhost kernel: [ 25.838884] pnp: 00:03: ioport range 0x856-0x85f has been reserved
Feb 9 09:14:40 localhost kernel: [ 25.838916] pnp: 00:03: ioport range 0x810-0x83f has been reserved
Feb 9 09:14:40 localhost kernel: [ 25.838946] pnp: 00:03: ioport range 0x840-0x84f has been reserved
Feb 9 09:14:40 localhost kernel: [ 25.839003] pnp: 00:04: ioport range 0xf400-0xf4fe has been reserved
Feb 9 09:14:40 localhost kernel: [ 25.839074] pnp: 00:09: ioport range 0x3f0-0x3f1 has been reserved
Feb 9 09:14:40 localhost kernel: [ 25.842461] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
Feb 9 09:14:40 localhost kernel: [ 25.842567] PCI: Bus 1, cardbus bridge: 0000:00:03.0
Feb 9 09:14:40 localhost kernel: [ 25.842592] IO window: 00001000-000010ff
Feb 9 09:14:40 localhost kernel: [ 25.842616] IO window: 00001400-000014ff
Feb 9 09:14:40 localhost kernel: [ 25.842642] PREFETCH window: 10000000-11ffffff
Feb 9 09:14:40 localhost kernel: [ 25.842668] MEM window: 12000000-13ffffff
Feb 9 09:14:40 localhost kernel: [ 25.842689] PCI: Bus 5, cardbus bridge: 0000:00:03.1
Feb 9 09:14:40 localhost kernel: [ 25.842713] IO window: 00001800-000018ff
Feb 9 09:14:40 localhost kernel: [ 25.842735] IO window: 00001c00-00001cff
Feb 9 09:14:40 localhost kernel: [ 25.842759] PREFETCH window: 14000000-15ffffff
Feb 9 09:14:40 localhost kernel: [ 25.842785] MEM window: 16000000-17ffffff
Feb 9 09:14:40 localhost kernel: [ 25.842817] PCI: Enabling device 0000:00:03.0 (0000 -> 0003)
Feb 9 09:14:40 localhost kernel: [ 25.844586] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
Feb 9 09:14:40 localhost kernel: [ 25.844620] PCI: setting IRQ 11 as level-triggered
Feb 9 09:14:40 localhost kernel: [ 25.844642] ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
Feb 9 09:14:40 localhost kernel: [ 25.844705] PCI: Enabling device 0000:00:03.1 (0000 -> 0003)
Feb 9 09:14:40 localhost kernel: [ 25.844736] ACPI: PCI Interrupt 0000:00:03.1[b] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
Feb 9 09:14:40 localhost kernel: [ 25.844904] NET: Registered protocol family 2
Feb 9 09:14:40 localhost kernel: [ 25.880214] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
Feb 9 09:14:40 localhost kernel: [ 25.880876] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
Feb 9 09:14:40 localhost kernel: [ 25.881101] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
Feb 9 09:14:40 localhost kernel: [ 25.881227] TCP: Hash tables configured (established 4096 bind 2048)
Feb 9 09:14:40 localhost kernel: [ 25.881253] TCP reno registered
Feb 9 09:14:40 localhost kernel: [ 25.884388] audit: initializing netlink socket (disabled)
Feb 9 09:14:40 localhost kernel: [ 25.884479] audit(1171008794.132:1): initialized
Feb 9 09:14:40 localhost kernel: [ 25.885535] VFS: Disk quotas dquot_6.5.1
Feb 9 09:14:40 localhost kernel: [ 25.885719] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Feb 9 09:14:40 localhost kernel: [ 25.886263] io scheduler noop registered
Feb 9 09:14:40 localhost kernel: [ 25.886293] io scheduler anticipatory registered
Feb 9 09:14:40 localhost kernel: [ 25.886314] io scheduler deadline registered
Feb 9 09:14:40 localhost kernel: [ 25.886411] io scheduler cfq registered (default)
Feb 9 09:14:40 localhost kernel: [ 25.886465] Limiting direct PCI/PCI transfers.
Feb 9 09:14:40 localhost kernel: [ 25.888159] isapnp: Scanning for PnP cards...
Feb 9 09:14:40 localhost kernel: [ 26.241243] isapnp: No Plug & Play device found
Feb 9 09:14:40 localhost kernel: [ 26.650029] Linux agpgart interface v0.101 (c) Dave Jones
Feb 9 09:14:40 localhost kernel: [ 26.650792] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Feb 9 09:14:40 localhost kernel: [ 26.651464] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Feb 9 09:14:40 localhost kernel: [ 26.652691] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Feb 9 09:14:40 localhost kernel: [ 26.658041] 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Feb 9 09:14:40 localhost kernel: [ 26.667252] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
Feb 9 09:14:40 localhost kernel: [ 26.668353] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Feb 9 09:14:40 localhost kernel: [ 26.668392] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Feb 9 09:14:40 localhost kernel: [ 26.668809] PIIX4: IDE controller at PCI slot 0000:00:01.1
Feb 9 09:14:40 localhost kernel: [ 26.668878] PIIX4: chipset revision 1
Feb 9 09:14:40 localhost kernel: [ 26.668899] PIIX4: not 100%% native mode: will probe irqs later
Feb 9 09:14:40 localhost kernel: [ 26.668944] ide0: BM-DMA at 0x0860-0x0867, BIOS settings: hda:DMA, hdb:pio
Feb 9 09:14:40 localhost kernel: [ 26.669026] ide1: BM-DMA at 0x0868-0x086f, BIOS settings: hdc:DMA, hdd:pio
Feb 9 09:14:40 localhost kernel: [ 26.669096] Probing IDE interface ide0...
Feb 9 09:14:40 localhost kernel: [ 26.955815] hda: IBM-DKLA-23240, ATA DISK drive
Feb 9 09:14:40 localhost kernel: [ 27.628146] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Feb 9 09:14:40 localhost kernel: [ 27.628717] Probing IDE interface ide1...
Feb 9 09:14:40 localhost kernel: [ 28.363698] hdc: TOSHIBA CD-ROM XM-1802B, ATAPI CD/DVD-ROM drive
Feb 9 09:14:40 localhost kernel: [ 28.733360] ide1 at 0x170-0x177,0x376 on irq 15
Feb 9 09:14:40 localhost kernel: [ 28.735160] hda: max request size: 128KiB
Feb 9 09:14:40 localhost kernel: [ 29.059858] hda: 6354432 sectors (3253 MB) w/460KiB Cache, CHS=6304/16/63, UDMA(33)
Feb 9 09:14:40 localhost kernel: [ 29.059906] hda: cache flushes not supported
Feb 9 09:14:40 localhost kernel: [ 29.060122] hda: hda1 hda2 < hda5 >
Feb 9 09:14:40 localhost kernel: [ 29.163295] hdc: ATAPI 24X CD-ROM drive, 128kB Cache, DMA
Feb 9 09:14:40 localhost kernel: [ 29.163346] Uniform CD-ROM driver Revision: 3.20
Feb 9 09:14:40 localhost kernel: [ 29.305069] ide-floppy driver 0.99.newide
Feb 9 09:14:40 localhost kernel: [ 29.306421] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Feb 9 09:14:40 localhost kernel: [ 29.320436] serio: i8042 KBD port at 0x60,0x64 irq 1
Feb 9 09:14:40 localhost kernel: [ 29.320484] serio: i8042 AUX port at 0x60,0x64 irq 12
Feb 9 09:14:40 localhost kernel: [ 29.322013] mice: PS/2 mouse device common for all mice
Feb 9 09:14:40 localhost kernel: [ 29.323525] EISA: Probing bus 0 at eisa.0
Feb 9 09:14:40 localhost kernel: [ 29.323592] Cannot allocate resource for EISA slot 1
Feb 9 09:14:40 localhost kernel: [ 29.323743] EISA: Detected 0 cards.
Feb 9 09:14:40 localhost kernel: [ 29.324420] TCP cubic registered
Feb 9 09:14:40 localhost kernel: [ 29.324511] NET: Registered protocol family 1
Feb 9 09:14:40 localhost kernel: [ 29.324563] NET: Registered protocol family 8
Feb 9 09:14:40 localhost kernel: [ 29.324583] NET: Registered protocol family 20
Feb 9 09:14:40 localhost kernel: [ 29.324841] Using IPI Shortcut mode
Feb 9 09:14:40 localhost kernel: [ 29.324863] Suspend2 Core.
Feb 9 09:14:40 localhost kernel: [ 29.325023] Suspend2 Userspace UI Support module loaded.
Feb 9 09:14:40 localhost kernel: [ 29.325454] Suspend2 Checksumming module loaded.
Feb 9 09:14:40 localhost kernel: [ 29.325865] Suspend2 Userspace Storage Manager module loaded.
Feb 9 09:14:40 localhost kernel: [ 29.326236] Suspend2 Compressor module loaded.
Feb 9 09:14:40 localhost kernel: [ 29.326658] Suspend2 Encryptor module loaded.
Feb 9 09:14:40 localhost kernel: [ 29.327077] Suspend2 Block I/O module loaded.
Feb 9 09:14:40 localhost kernel: [ 29.327105] Suspend2 Swap Allocator module loaded.
Feb 9 09:14:40 localhost kernel: [ 29.327507] Time: tsc clocksource has been installed.
Feb 9 09:14:40 localhost kernel: [ 29.328166] ACPI: (supports S0 S1 S3 S4 S5)
Feb 9 09:14:40 localhost kernel: [ 29.332361] Freeing unused kernel memory: 312k freed
Feb 9 09:14:40 localhost kernel: [ 29.402759] input: AT Translated Set 2 keyboard as /class/input/input0
Feb 9 09:14:40 localhost kernel: [ 30.060371] ACPI: CPU0 (power states: C1[C1] C2[C2])
Feb 9 09:14:40 localhost kernel: [ 30.102696] ACPI: Thermal Zone [THM] (25 C)
Feb 9 09:14:40 localhost kernel: [ 17.220000] Time: acpi_pm clocksource has been installed.
Feb 9 09:14:40 localhost kernel: [ 17.936000] usbcore: registered new interface driver usbfs
Feb 9 09:14:40 localhost kernel: [ 17.940000] usbcore: registered new interface driver hub
Feb 9 09:14:40 localhost kernel: [ 17.940000] usbcore: registered new device driver usb
Feb 9 09:14:40 localhost kernel: [ 17.956000] USB Universal Host Controller Interface driver v3.0
Feb 9 09:14:40 localhost kernel: [ 17.960000] ACPI: PCI Interrupt 0000:00:01.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
Feb 9 09:14:40 localhost kernel: [ 17.960000] uhci_hcd 0000:00:01.2: UHCI Host Controller
Feb 9 09:14:40 localhost kernel: [ 17.960000] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
Feb 9 09:14:40 localhost kernel: [ 17.960000] uhci_hcd 0000:00:01.2: irq 11, io base 0x0000ece0
Feb 9 09:14:40 localhost kernel: [ 17.964000] usb usb1: configuration #1 chosen from 1 choice
Feb 9 09:14:40 localhost kernel: [ 17.964000] hub 1-0:1.0: USB hub found
Feb 9 09:14:40 localhost kernel: [ 17.964000] hub 1-0:1.0: 2 ports detected
Feb 9 09:14:40 localhost kernel: [ 18.748000] hdc: packet command error: status=0x51 { DriveReady SeekComplete Error }
Feb 9 09:14:40 localhost kernel: [ 18.748000] hdc: packet command error: error=0x50 { LastFailedSense=0x05 }
Feb 9 09:14:40 localhost kernel: [ 18.748000] ide: failed opcode was: unknown
Feb 9 09:14:40 localhost kernel: [ 19.028000] hdc: packet command error: status=0x51 { DriveReady SeekComplete Error }
Feb 9 09:14:40 localhost kernel: [ 19.028000] hdc: packet command error: error=0x50 { LastFailedSense=0x05 }
Feb 9 09:14:40 localhost kernel: [ 19.028000] ide: failed opcode was: unknown
Feb 9 09:14:40 localhost kernel: [ 19.456000] EXT3-fs: INFO: recovery required on readonly filesystem.
Feb 9 09:14:40 localhost kernel: [ 19.456000] EXT3-fs: write access will be enabled during recovery.
Feb 9 09:14:40 localhost kernel: [ 32.960000] kjournald starting. Commit interval 5 seconds
Feb 9 09:14:40 localhost kernel: [ 32.960000] EXT3-fs: recovery complete.
Feb 9 09:14:40 localhost kernel: [ 32.984000] EXT3-fs: mounted filesystem with ordered data mode.
Feb 9 09:14:40 localhost kernel: [ 55.004000] Synaptics Touchpad, model: 1, fw: 4.2, id: 0x844a1, caps: 0x0/0x0
Feb 9 09:14:40 localhost kernel: [ 55.068000] input: SynPS/2 Synaptics TouchPad as /class/input/input1
Feb 9 09:14:40 localhost kernel: [ 62.492000] input: PC Speaker as /class/input/input2
Feb 9 09:14:40 localhost kernel: [ 62.616000] Yenta: CardBus bridge found at 0000:00:03.0 [1028:0075]
Feb 9 09:14:40 localhost kernel: [ 62.744000] Yenta: ISA IRQ mask 0x0418, PCI irq 11
Feb 9 09:14:40 localhost kernel: [ 62.744000] Socket status: 30000020
Feb 9 09:14:40 localhost kernel: [ 62.744000] Yenta: CardBus bridge found at 0000:00:03.1 [1028:0075]
Feb 9 09:14:40 localhost kernel: [ 62.836000] irda_init()
Feb 9 09:14:40 localhost kernel: [ 62.836000] NET: Registered protocol family 23
Feb 9 09:14:40 localhost kernel: [ 62.880000] hda: dma_intr: status=0x58 { DriveReady SeekComplete DataRequest }
Feb 9 09:14:40 localhost kernel: [ 62.880000] ide: failed opcode was: unknown
Feb 9 09:14:40 localhost kernel: [ 62.880000] hda: set_drive_speed_status: status=0x58 { DriveReady SeekComplete DataRequest }
Feb 9 09:14:40 localhost kernel: [ 62.880000] ide: failed opcode was: unknown
Feb 9 09:14:40 localhost kernel: [ 62.884000] Yenta: ISA IRQ mask 0x0418, PCI irq 11
Feb 9 09:14:40 localhost kernel: [ 62.884000] Socket status: 30000006
Feb 9 09:14:40 localhost kernel: [ 62.900000] Real Time Clock Driver v1.12ac
Feb 9 09:14:40 localhost kernel: [ 62.956000] Floppy drive(s): fd0 is 1.44M
Feb 9 09:14:40 localhost kernel: [ 62.972000] FDC 0 is a post-1991 82077
Feb 9 09:14:40 localhost kernel: [ 63.084000] parport: PnPBIOS parport detected.
Feb 9 09:14:40 localhost kernel: [ 63.084000] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
Feb 9 09:14:40 localhost kernel: [ 63.336000] piix4_smbus 0000:00:01.3: Found 0000:00:01.3 device
Feb 9 09:14:40 localhost kernel: [ 63.380000] pccard: CardBus card inserted into slot 0
Feb 9 09:14:40 localhost kernel: [ 63.548000] found SMC SuperIO Chip (devid=0x09 rev=01 base=0x03f0): FDC37N958FR
Feb 9 09:14:40 localhost kernel: [ 63.548000] Revision higher than expected
Feb 9 09:14:40 localhost kernel: [ 65.644000] CS4232 WSS PnP manual resources are invalid, using auto config
Feb 9 09:14:40 localhost kernel: [ 65.644000] CS4232 WSS PnP configure failed for WSS (out of resources?)
Feb 9 09:14:40 localhost kernel: [ 65.644000] PnP BIOS detection failed for CS4232
Feb 9 09:14:40 localhost kernel: [ 65.656000] pnp: Device 00:11 disabled.
Feb 9 09:14:40 localhost kernel: [ 65.656000] cs4232-pnpbios: probe of 00:11 failed with error -16
Feb 9 09:14:40 localhost kernel: [ 65.656000] CS4232 soundcard not found or device busy
Feb 9 09:14:40 localhost kernel: [ 66.092000] cs: IO port probe 0x100-0x4ff: excluding 0x210-0x217 0x280-0x287
Feb 9 09:14:40 localhost kernel: [ 66.096000] cs: IO port probe 0xc00-0xcf7: clean.
Feb 9 09:14:40 localhost kernel: [ 66.096000] cs: IO port probe 0xa00-0xaff: clean.
Feb 9 09:14:40 localhost kernel: [ 66.136000] cs: IO port probe 0x100-0x4ff: excluding 0x210-0x217 0x280-0x287
Feb 9 09:14:40 localhost kernel: [ 66.136000] cs: IO port probe 0xc00-0xcf7: clean.
Feb 9 09:14:40 localhost kernel: [ 66.140000] cs: IO port probe 0xa00-0xaff: clean.
Feb 9 09:14:40 localhost kernel: [ 67.636000] 8139too Fast Ethernet driver 0.9.28
Feb 9 09:14:40 localhost kernel: [ 67.636000] PCI: Enabling device 0000:01:00.0 (0000 -> 0003)
Feb 9 09:14:40 localhost kernel: [ 67.636000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
Feb 9 09:14:40 localhost kernel: [ 67.636000] PCI: Setting latency timer of device 0000:01:00.0 to 64
Feb 9 09:14:40 localhost kernel: [ 67.636000] eth0: RealTek RTL8139 at 0xc88a4000, 00:00:b4:20:19:c7, IRQ 11
Feb 9 09:14:40 localhost kernel: [ 67.636000] eth0: Identified 8139 chip type 'RTL-8139C'
Feb 9 09:14:40 localhost kernel: [ 67.772000] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
Feb 9 09:14:40 localhost kernel: [ 68.952000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Feb 9 09:14:40 localhost kernel: [ 69.936000] NET: Registered protocol family 10
Feb 9 09:14:40 localhost kernel: [ 69.936000] lo: Disabled Privacy Extensions
Feb 9 09:14:40 localhost kernel: [ 70.084000] lp0: using parport0 (interrupt-driven).
Feb 9 09:14:40 localhost kernel: [ 71.468000] EXT3 FS on hda1, internal journal
Feb 9 09:14:40 localhost kernel: [ 73.424000] device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com
Feb 9 09:14:40 localhost kernel: [ 75.968000] hdc: packet command error: status=0x51 { DriveReady SeekComplete Error }
Feb 9 09:14:40 localhost kernel: [ 75.968000] hdc: packet command error: error=0x50 { LastFailedSense=0x05 }
Feb 9 09:14:40 localhost kernel: [ 75.968000] ide: failed opcode was: unknown
Feb 9 09:14:40 localhost kernel: [ 76.468000] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
Feb 9 09:14:40 localhost kernel: [ 76.468000] device-mapper: ioctl: error adding target to table
Feb 9 09:14:40 localhost kernel: [ 76.488000] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
Feb 9 09:14:40 localhost kernel: [ 76.488000] device-mapper: ioctl: error adding target to table
Feb 9 09:14:40 localhost kernel: [ 76.508000] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
Feb 9 09:14:40 localhost kernel: [ 76.508000] device-mapper: ioctl: error adding target to table
Feb 9 09:14:40 localhost kernel: [ 76.516000] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
Feb 9 09:14:40 localhost kernel: [ 76.516000] device-mapper: ioctl: error adding target to table
Feb 9 09:14:40 localhost kernel: [ 76.524000] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
Feb 9 09:14:40 localhost kernel: [ 76.524000] device-mapper: ioctl: error adding target to table
Feb 9 09:14:40 localhost kernel: [ 76.528000] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
Feb 9 09:14:40 localhost kernel: [ 76.528000] device-mapper: ioctl: error adding target to table
Feb 9 09:14:40 localhost kernel: [ 76.536000] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
Feb 9 09:14:40 localhost kernel: [ 76.536000] device-mapper: ioctl: error adding target to table
Feb 9 09:14:40 localhost kernel: [ 76.544000] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
Feb 9 09:14:40 localhost kernel: [ 76.544000] device-mapper: ioctl: error adding target to table
Feb 9 09:14:40 localhost kernel: [ 80.352000] eth0: no IPv6 routers present
Feb 9 09:14:40 localhost kernel: [ 89.132000] pnp: Device 00:11 activated.
Feb 9 09:14:40 localhost kernel: [ 90.132000] ACPI: Battery Slot [BAT0] (battery present)
Feb 9 09:14:40 localhost kernel: [ 90.136000] ACPI: Battery Slot [BAT1] (battery absent)
Feb 9 09:14:40 localhost kernel: [ 90.316000] ACPI: AC Adapter [AC] (on-line)
Feb 9 09:14:40 localhost kernel: [ 90.720000] ACPI: Lid Switch [LID]
Feb 9 09:14:40 localhost kernel: [ 90.720000] ACPI: Power Button (CM) [PBTN]
Feb 9 09:14:40 localhost kernel: [ 90.720000] ACPI: Sleep Button (CM) [SBTN]
Feb 9 09:14:40 localhost kernel: [ 90.872000] Using specific hotkey driver
Feb 9 09:14:40 localhost kernel: [ 91.044000] ACPI: ACPI Dock Station Driver
Feb 9 09:14:40 localhost kernel: [ 91.580000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
Feb 9 09:15:44 localhost init: tty1 process ended, respawning
Feb 9 09:15:51 localhost smbd[3901]: [2007/02/09 09:15:51, 0] printing/pcap.c:pcap_cache_reload(159)
Feb 9 09:15:51 localhost smbd[3901]: Unable to open printcap file /etc/printcap for read!
Feb 9 09:15:51 localhost smbd[3901]: [2007/02/09 09:15:51, 0] printing/pcap.c:pcap_cache_reload(159)
Feb 9 09:15:51 localhost smbd[3901]: Unable to open printcap file /etc/printcap for read!
Feb 9 09:16:00 localhost /usr/sbin/cron[3972]: (CRON) INFO (pidfile fd = 3)
Feb 9 09:16:00 localhost /usr/sbin/cron[3975]: (CRON) STARTUP (fork ok)
Feb 9 09:16:00 localhost /usr/sbin/cron[3975]: (CRON) INFO (Running @reboot jobs)
Feb 9 09:17:01 localhost /USR/SBIN/CRON[4007]: (root) CMD ( run-parts --report /etc/cron.hourly)
Feb 9 09:23:58 localhost gdm[3686]: Error reinitilizing server
Feb 9 09:24:27 localhost gdm[4102]: gdm_slave_xioerror_handler: Fatal X error - Restarting :0
Feb 9 09:24:38 localhost gdm[4114]: gdm_slave_xioerror_handler: Fatal X error - Restarting :0
Feb 9 09:24:50 localhost gdm[4126]: gdm_slave_xioerror_handler: Fatal X error - Restarting :0
Feb 9 09:24:50 localhost gdm[3685]: deal_with_x_crashes: Running the XKeepsCrashing script
Feb 9 09:26:35 localhost gdm[3685]: Failed to start X server several times in a short time period; disabling display :0
Feb 9 09:54:42 localhost -- MARK --
Feb 9 10:04:54 localhost gdm[4812]: GDM already running. Aborting!
Feb 9 10:17:01 localhost /USR/SBIN/CRON[4912]: (root) CMD ( run-parts --report /etc/cron.hourly)
Feb 9 10:34:43 localhost -- MARK --
Feb 9 10:54:43 localhost -- MARK --
Feb 9 11:06:14 localhost nmbd[3900]: [2007/02/09 11:06:14, 0] nmbd/nmbd.c:terminate(58)
Feb 9 11:06:14 localhost nmbd[3900]: Got SIGTERM: going down...
Feb 9 11:09:00 localhost smbd[5378]: [2007/02/09 11:09:00, 0] printing/pcap.c:pcap_cache_reload(159)
Feb 9 11:09:00 localhost smbd[5378]: Unable to open printcap file /etc/printcap for read!
Feb 9 11:09:00 localhost smbd[5378]: [2007/02/09 11:09:00, 0] printing/pcap.c:pcap_cache_reload(159)
Feb 9 11:09:00 localhost smbd[5378]: Unable to open printcap file /etc/printcap for read!
Feb 9 11:17:02 localhost /USR/SBIN/CRON[5384]: (root) CMD ( run-parts --report /etc/cron.hourly)
Feb 9 11:19:59 localhost kernel: [ 7607.648000] Suspend2 2.2.9: SwapAllocator: Signature found.
Feb 9 11:20:00 localhost kernel: [ 7607.648000] Suspend2 2.2.9: Resuming enabled.
Feb 9 11:20:00 localhost kernel: [ 7607.648000] Suspend2 2.2.9: Initiating a software suspend cycle.
Feb 9 11:20:00 localhost kernel: [ 7607.648000] suspend_userui: program not configured. suspend_userui disabled.
Feb 9 11:20:00 localhost kernel: [ 7607.648000] Freezing processes
Feb 9 11:20:00 localhost kernel: [ 7607.648000] Stopping tasks... done.
Feb 9 11:20:00 localhost kernel: [ 7607.912000] You need some storage available to be able to suspend.
Feb 9 11:20:00 localhost kernel: [ 7607.912000] Restarting tasks... done.
Feb 9 11:20:00 localhost kernel: [ 7608.444000] Suspend2 debugging info:
Feb 9 11:20:00 localhost kernel: [ 7608.444000] - SUSPEND core : 2.2.9
Feb 9 11:20:00 localhost kernel: [ 7608.444000] - Kernel Version : 2.6.19swsusp2.070206
Feb 9 11:20:00 localhost kernel: [ 7608.444000] - Compiler vers. : 4.1
Feb 9 11:20:00 localhost kernel: [ 7608.444000] - Attempt number : 1
Feb 9 11:20:00 localhost kernel: [ 7608.444000] - Parameters : 5 16384 0 0 0 0
Feb 9 11:20:00 localhost kernel: [ 7608.444000] - Overall expected compression percentage: 0.
Feb 9 11:20:00 localhost kernel: [ 7608.444000] - Compressor is 'lzf'.
Feb 9 11:20:00 localhost kernel: [ 7608.444000] - Encryptor is not set.
Feb 9 11:20:00 localhost kernel: [ 7608.444000] - SwapAllocator active.
Feb 9 11:20:00 localhost kernel: [ 7608.444000] Swap available for image: 0 pages.
Feb 9 11:20:00 localhost kernel: [ 7608.444000] - No I/O speed stats available.
Feb 9 11:20:00 localhost kernel: [ 7608.444000] - Extra pages : 0 used/500.
Feb 9 11:20:00 localhost kernel: [ 7609.284000] ACPI: Lid Switch [LID]
Feb 9 11:20:00 localhost kernel: [ 7609.288000] ACPI: Power Button (CM) [PBTN]
Feb 9 11:20:00 localhost kernel: [ 7609.288000] ACPI: Sleep Button (CM) [SBTN]
Feb 9 11:20:01 localhost kernel: [ 7609.768000] Synaptics Touchpad, model: 1, fw: 4.2, id: 0x844a1, caps: 0x0/0x0
Feb 9 11:20:01 localhost kernel: [ 7609.832000] input: SynPS/2 Synaptics TouchPad as /class/input/input3
Feb 9 11:20:33 localhost kernel: [ 7640.476000] Suspend2 2.2.9: Initiating a software suspend cycle.
Feb 9 11:20:33 localhost kernel: [ 7640.476000] suspend_userui: program not configured. suspend_userui disabled.
Feb 9 11:20:33 localhost kernel: [ 7640.476000] Freezing processes
Feb 9 11:20:33 localhost kernel: [ 7640.476000] Stopping tasks... done.
Feb 9 11:20:33 localhost kernel: [ 7641.456000] You need some storage available to be able to suspend.
Feb 9 11:20:33 localhost kernel: [ 7641.456000] Restarting tasks... done.
Feb 9 11:20:34 localhost kernel: [ 7641.856000] Suspend2 debugging info:
Feb 9 11:20:34 localhost kernel: [ 7641.856000] - SUSPEND core : 2.2.9
Feb 9 11:20:34 localhost kernel: [ 7641.856000] - Kernel Version : 2.6.19swsusp2.070206
Feb 9 11:20:34 localhost kernel: [ 7641.856000] - Compiler vers. : 4.1
Feb 9 11:20:34 localhost kernel: [ 7641.856000] - Attempt number : 2
Feb 9 11:20:34 localhost kernel: [ 7641.856000] - Parameters : 5 16384 0 0 0 0
Feb 9 11:20:34 localhost kernel: [ 7641.856000] - Overall expected compression percentage: 0.
Feb 9 11:20:34 localhost kernel: [ 7641.856000] - Compressor is 'lzf'.
Feb 9 11:20:34 localhost kernel: [ 7641.856000] - Encryptor is not set.
Feb 9 11:20:34 localhost kernel: [ 7641.856000] - SwapAllocator active.
Feb 9 11:20:34 localhost kernel: [ 7641.856000] Swap available for image: 0 pages.
Feb 9 11:20:34 localhost kernel: [ 7641.856000] - No I/O speed stats available.
Feb 9 11:20:34 localhost kernel: [ 7641.856000] - Extra pages : 0 used/500.
Feb 9 11:20:34 localhost kernel: [ 7642.208000] ACPI: Lid Switch [LID]
Feb 9 11:20:34 localhost kernel: [ 7642.212000] ACPI: Power Button (CM) [PBTN]
Feb 9 11:20:34 localhost kernel: [ 7642.212000] ACPI: Sleep Button (CM) [SBTN]
Feb 9 11:20:34 localhost kernel: [ 7642.796000] Synaptics Touchpad, model: 1, fw: 4.2, id: 0x844a1, caps: 0x0/0x0
Feb 9 11:20:35 localhost kernel: [ 7642.860000] input: SynPS/2 Synaptics TouchPad as /class/input/input4
Feb 9 11:34:46 localhost -- MARK --
Feb 9 11:36:27 localhost gdm[6557]: gdm_slave_xioerror_handler: Fatal X error - Restarting :0
Feb 9 11:36:31 localhost gdm[6563]: gdm_slave_xioerror_handler: Fatal X error - Restarting :0
Feb 9 11:36:36 localhost gdm[6571]: gdm_slave_xioerror_handler: Fatal X error - Restarting :0
Feb 9 11:36:36 localhost gdm[6556]: deal_with_x_crashes: Running the XKeepsCrashing script
Feb 9 11:36:39 localhost gdm[6556]: Failed to start X server several times in a short time period; disabling display :0Bienvenue sur mon site perso : http://thibaud.hulin.free.fr/dokuwiki
Pour l'utilisabilité et l'ergonomie des logiciels libres : http://ergolibre.tuxfamily.org
Apprentissage libre des langues : http://polyglotte.tuxfamily.org et http://www.akademia.ch/websites/ergolang/
Hors ligne
#4 Le 09/02/2007, à 12:42
- loloemr
Re : [Xorg]Impossibilité d'utiliser le driver neomagic
Effectivement je l'ai édité entre temps. Je m'étais gourré de fichier de log ..
Ton syslog dit
gdm_slave_xioerror_handler: Fatal X error - Restarting :0
Dernière modification par loloemr (Le 09/02/2007, à 12:43)
L'open source est garant de notre indépendance technologique, permet de créer des emplois locaux et véhiculent deux idées fondamentales : la transparence de l'information et la supériorité de la collaboration sur la concurrence ... GNU/Linux c'est bon mangez-en !!
Hors ligne
#5 Le 09/02/2007, à 12:58
- Thibaud
Re : [Xorg]Impossibilité d'utiliser le driver neomagic
Tu veux dire que c'est un problème de gdm et non de X ?
Bienvenue sur mon site perso : http://thibaud.hulin.free.fr/dokuwiki
Pour l'utilisabilité et l'ergonomie des logiciels libres : http://ergolibre.tuxfamily.org
Apprentissage libre des langues : http://polyglotte.tuxfamily.org et http://www.akademia.ch/websites/ergolang/
Hors ligne
#6 Le 09/02/2007, à 14:40
- loloemr
Re : [Xorg]Impossibilité d'utiliser le driver neomagic
Non fatal X error c'est pour le X.
cat /var/log/Xorg.0.log | grep "(EE)"
L'open source est garant de notre indépendance technologique, permet de créer des emplois locaux et véhiculent deux idées fondamentales : la transparence de l'information et la supériorité de la collaboration sur la concurrence ... GNU/Linux c'est bon mangez-en !!
Hors ligne
#7 Le 09/02/2007, à 14:55
- Thibaud
Re : [Xorg]Impossibilité d'utiliser le driver neomagic
Voilà le résultat :
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(EE) AIGLX: Screen 0 is not DRI capable
(EE) xf86OpenSerial: Cannot open device /dev/wacom
(EE) xf86OpenSerial: Cannot open device /dev/wacom
(EE) xf86OpenSerial: Cannot open device /dev/wacom
(EE) xf86OpenSerial: Cannot open device /dev/wacom
(EE) xf86OpenSerial: Cannot open device /dev/wacom
(EE) xf86OpenSerial: Cannot open device /dev/wacomBienvenue sur mon site perso : http://thibaud.hulin.free.fr/dokuwiki
Pour l'utilisabilité et l'ergonomie des logiciels libres : http://ergolibre.tuxfamily.org
Apprentissage libre des langues : http://polyglotte.tuxfamily.org et http://www.akademia.ch/websites/ergolang/
Hors ligne
#8 Le 09/02/2007, à 15:12
- loloemr
Re : [Xorg]Impossibilité d'utiliser le driver neomagic
Si tu as Edgy, essaie d'ajouter les lignes suivantes a la fin du fichier /etc/X11/xorg.conf
Section "Extensions"
Option "Composite" "disable"
EndSectionSinon fais peter ton modele de carte :
lspci | grep VGA
L'open source est garant de notre indépendance technologique, permet de créer des emplois locaux et véhiculent deux idées fondamentales : la transparence de l'information et la supériorité de la collaboration sur la concurrence ... GNU/Linux c'est bon mangez-en !!
Hors ligne
#9 Le 09/02/2007, à 16:08
- Thibaud
Re : [Xorg]Impossibilité d'utiliser le driver neomagic
Voilà mon modèle de carte :
00:00.0 VGA compaible controller: Neomagic Corporation NM2103 [MAgicGraph 128XD] (rev 01)
Après avoir modifié le fichier xorg.conf comme tu me l'as dit, j'ai précisé "neomagic" à driver, X n'a pas voulu démarrer. Le méchant !
Bienvenue sur mon site perso : http://thibaud.hulin.free.fr/dokuwiki
Pour l'utilisabilité et l'ergonomie des logiciels libres : http://ergolibre.tuxfamily.org
Apprentissage libre des langues : http://polyglotte.tuxfamily.org et http://www.akademia.ch/websites/ergolang/
Hors ligne
#10 Le 09/02/2007, à 16:27
- Thibaud
Re : [Xorg]Impossibilité d'utiliser le driver neomagic
Au fait, est-il possible de compiler X à la main ? J'ai téléchargé X, mais le make a planté. Existe-t-il un tuto ? Je n'ai pas non plus compris comment fonctionnait leur wiki...
Bienvenue sur mon site perso : http://thibaud.hulin.free.fr/dokuwiki
Pour l'utilisabilité et l'ergonomie des logiciels libres : http://ergolibre.tuxfamily.org
Apprentissage libre des langues : http://polyglotte.tuxfamily.org et http://www.akademia.ch/websites/ergolang/
Hors ligne
#11 Le 12/02/2007, à 16:08
- Thibaud
Re : [Xorg]Impossibilité d'utiliser le driver neomagic
Bno, X compilé demande 4go et 4h avec un pentium 4 semble-t-il, donc très peu pour ma config...
Personne n'a une idée pour régler mon souci de driver ?
Voici mon /varlog/Xorg.0.log :
X Window System Version 7.1.1
Release Date: 12 May 2006
X Protocol Version 11, Revision 0, Release 7.1.1
Build Operating System: Linux 2.6.15.7 i686
Current Operating System: Linux dell 2.6.1920070212 #1 Mon Feb 12 15:03:31 CET 2007 i586
Build Date: 07 July 2006
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Feb 12 17:46:33 2007
(==) Using config file: "/etc/X11/xorg.conf"
Data incomplete in file /etc/X11/xorg.conf
Undefined Device "Ecran generique" referenced by Screen "Default Screen".
(EE) Problem parsing the config file
(EE) Error parsing the config file
Fatal server error:
no screens found
(WW) xf86CloseConsole: KDSETMODE failed: Bad file descriptor
(WW) xf86CloseConsole: VT_GETMODE failed: Bad file descriptor
(WW) xf86OpenConsole: VT_GETSTATE failed: Bad file descriptor
Dernière modification par Thibaud (Le 12/02/2007, à 19:13)
Bienvenue sur mon site perso : http://thibaud.hulin.free.fr/dokuwiki
Pour l'utilisabilité et l'ergonomie des logiciels libres : http://ergolibre.tuxfamily.org
Apprentissage libre des langues : http://polyglotte.tuxfamily.org et http://www.akademia.ch/websites/ergolang/
Hors ligne