Pages : 1
#1 Le 20/06/2007, à 15:57
- Khantat
Problème lors du lancement de Grub
Bonjour à tous,
Comme beaucoup de monde je me suis décidé à installer Ubuntu il y a quelques jours, en suivant les tuto mis à disposition sur le site. Et comme beaucoup de monde aussi, j'ai un petit problème, et j'ai de forte présomption quant à la culpabilité de Grub
J'ai opté pour une installation en parallèle d'XP, sur un disque dur différent. J'ai actuellement 2 disques durs S-ATA, un branché sur la prise S-ATA 1 (celui qui contient Windows) et le second sur la prise S-ATA 3, qui contient Ubuntu.
Je suppose avoir bien installé Ubuntu, en tout cas j'ai suivi le tuto sans trop m'éloigner, mais lorsque je choisis l'option "Executer GRUB" lors du boot, je n'obtiens qu'un écran noir avec la laconique indication : "GRUB_". Et puis plus rien ne se passe.
Quelqu'un aurait-il une idée de qui cloche ? Dans le doute, je posterai le resultat d'un fdsik -l et mon menu.lst quand j'aurais ma machine sous la main, car j'ai cru comprendre en lisant le forum que c'était assez utile dans ce cas la
Merci d'avance pour les éventuels conseils!
Hors ligne
#2 Le 20/06/2007, à 23:08
- Khantat
Re : Problème lors du lancement de Grub
Comme promis, voila ce que donne un fdisk -l :
Disque /dev/sda: 250.0 Go, 250059350016 octets
255 têtes, 63 secteurs/piste, 30401 cylindres
Unités = cylindres de 16065 * 512 = 8225280 octetsPériphérique Amorce Début Fin Blocs Id Système
/dev/sda1 * 1 30026 241183813+ 83 Linux
/dev/sda2 30027 30401 3012187+ 5 Extended
/dev/sda5 30027 30401 3012156 82 Linux swap / SolarisDisque /dev/sdb: 250.0 Go, 250059350016 octets
255 têtes, 63 secteurs/piste, 30401 cylindres
Unités = cylindres de 16065 * 512 = 8225280 octetsPériphérique Amorce Début Fin Blocs Id Système
/dev/sdb1 * 1 10443 83883366 7 HPFS/NTFS
/dev/sdb2 10444 30400 160304602+ f W95 Etendu (LBA)
/dev/sdb5 10444 30400 160304571 7 HPFS/NTFS
Et mon menu.lst :
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not change this entry to 'saved' or your
# array will desync and will not let you boot your system.
default 0## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu# Pretty colours
#color cyan/blue white/blue## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
##
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=99856bec-d3ed-4277-955a-51fcadfd88d8 ro## Setup crashdump menu entries
## e.g. crashdump=1
# crashdump=0## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,0)## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash locale=fr_FR## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false## Xen hypervisor options to use with the default Xen boot option
# xenhopt=## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false## ## End Default Options ##
title Ubuntu, kernel 2.6.20-15-generic
root (hd0,0)
kernel /boot/vmlinuz-2.6.20-15-generic root=UUID=99856bec-d3ed-4277-955a-51fcadfd88d8 ro quiet splash locale=fr_FR
initrd /boot/initrd.img-2.6.20-15-generic
quiet
savedefaulttitle Ubuntu, kernel 2.6.20-15-generic (recovery mode)
root (hd0,0)
kernel /boot/vmlinuz-2.6.20-15-generic root=UUID=99856bec-d3ed-4277-955a-51fcadfd88d8 ro single
initrd /boot/initrd.img-2.6.20-15-generictitle Ubuntu, memtest86+
root (hd0,0)
kernel /boot/memtest86+.bin
quiet### END DEBIAN AUTOMAGIC KERNELS LIST
# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sdb1
title Microsoft Windows XP Professionnel
root (hd1,0)
savedefault
makeactive
map (hd0) (hd1)
map (hd1) (hd0)
chainloader +1
Toujours pas d'idée ?
Dernière modification par Khantat (Le 20/06/2007, à 23:11)
Hors ligne
#3 Le 21/06/2007, à 06:29
- malbo
Re : Problème lors du lancement de Grub
Pour tenter de recréer le lanceur de GRUB, dans le lien suivant, tu descends à la ligne "Avec le CD d'installation version supérieure ou égale à 6.06 (Dapper)" et tu appliques la méthode décrite.
http://doc.ubuntu-fr.org/grub
Mais moi, je préfère la méthode du lien suivant ( après la ligne "Restaurer GRUB automatiquement / Avec votre LiveCD (1ere méthode)"
http://doc.ubuntu-fr.org/tutoriel/comment_recuperer_ubuntu_apres_installation_windows
Hors ligne
#4 Le 21/06/2007, à 15:00
- Khantat
Re : Problème lors du lancement de Grub
Merci pour ta réponse! Je vais essayer ça ce soir, même si j'ai quelque doute
Hors ligne
Pages : 1