#1 Le 23/07/2007, à 19:06
- milouzz
GROS problème qui me coûte cher {Terratec Cinergy XS}
Bonjour à tous, j'ai aujourd'hui installer Ubuntu et je souhaites pouvoir regarder la Tv à l'aide de mon Tuner Terratec Cinergy XS (Clé USB).
Néanmoins, je me suis déjà pas mal renseigner à l'aide des Topics suivants:
1/ http://forum.ubuntu-fr.org/viewtopic.php?id=117348
2/ http://forum.ubuntu-fr.org/viewtopic.php?id=135063
Malgrès tout, je ne parviens pas du tout à l'installer et je ne sais plus par ou (re)commencer sachant que j'ai fais pas mal de tentatives, tout ce que je peux vous dire c'est que j'ai la version 0.8.3 de Kaffeine et que j'ai lancé la commande "lsusb" afin d'en savoir plus sur ma clé, et voici ce que ca donne:
Bus 005 Device 014: ID 0ccd:0043 TerraTec Electronic GmbHPourriez vous me guider et m'expliquer clairement comment dois-je m'y prendre, tout en évitant si possible d'aborder un vocabulaire trop spécifique sachant que je suis un réel débutant (je parles pour ce qui est de Linux...)
Je sais enfin que j'ai chargé différentes choses tel que le driver Em2880 pour ensuite éditer le fichier /etc/modules afin qu'il se lance au démarrage, et pleins d'autre petites choses comme ca 
Je ne sais plus trop ou j'en suis et ce que je dois faire... 
Je suis perdus! 
Merci.
Dernière modification par milouzz (Le 26/07/2007, à 20:36)
Hors ligne
#2 Le 23/07/2007, à 21:12
- milouzz
Re : GROS problème qui me coûte cher {Terratec Cinergy XS}
Petite précision, j'ai pu apprendre une nouvelle commande, soit "lsmod | grep cinergy" que j'ai effectué dans le terminal et cela ne donne rien...
Tandis que "lsmod" me donne:
Module Size Used by
binfmt_misc 12680 1
rfcomm 40856 0
l2cap 25856 5 rfcomm
bluetooth 55908 4 rfcomm,l2cap
ppdev 10116 0
ipt_TCPMSS 4992 1
xt_tcpmss 3200 1
xt_tcpudp 4224 1
iptable_mangle 3712 1
ip_tables 13796 1 iptable_mangle
x_tables 16388 4 ipt_TCPMSS,xt_tcpmss,xt_tcpudp,ip_tables
speedstep_lib 6148 0
cpufreq_stats 7360 0
cpufreq_userspace 5408 0
cpufreq_conservative 8200 0
cpufreq_ondemand 9228 0
freq_table 5792 2 cpufreq_stats,cpufreq_ondemand
cpufreq_powersave 2688 0
pcc_acpi 13184 0
tc1100_wmi 8068 0
dev_acpi 12292 0
sony_acpi 6284 0
sbs 15652 0
container 5248 0
asus_acpi 17308 0
backlight 7040 1 asus_acpi
ac 6020 0
dock 10268 0
button 8720 0
battery 10756 0
video 16388 0
i2c_ec 6016 1 sbs
pppoe 15424 2
pppox 4488 1 pppoe
ipv6 268960 12
ppp_generic 29076 6 pppoe,pppox
slhc 7680 1 ppp_generic
em28xx 48040 0
compat_ioctl32 2304 1 em28xx
ir_common 31236 1 em28xx
tveeprom 15888 1 em28xx
sbp2 23812 0
lp 12452 0
fuse 46612 0
snd_usb_audio 79744 0
snd_usb_lib 17280 1 snd_usb_audio
snd_hwdep 9988 1 snd_usb_audio
snd_seq_dummy 4740 0
snd_seq_oss 32896 0
snd_hda_intel 21912 1
snd_hda_codec 205056 1 snd_hda_intel
snd_seq_midi 9600 0
snd_rawmidi 25472 2 snd_usb_lib,snd_seq_midi
snd_pcm_oss 44544 0
snd_mixer_oss 17408 1 snd_pcm_oss
nvidia 4713780 22
usb_storage 72256 0
snd_seq_midi_event 8448 2 snd_seq_oss,snd_seq_midi
snd_pcm 79876 4 snd_usb_audio,snd_hda_intel,snd_hda_codec,snd_pcm_oss
i2c_core 22656 4 i2c_ec,em28xx,tveeprom,nvidia
snd_seq 52592 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
usbhid 26592 0
gspca 607824 0
snd_seq_device 9100 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd_timer 23684 2 snd_pcm,snd_seq
hid 27392 1 usbhid
libusual 17936 1 usb_storage
videodev 28160 2 em28xx,gspca
v4l2_common 25216 2 em28xx,videodev
wlan_scan_sta 14976 1
v4l1_compat 15236 2 em28xx,videodev
snd 54020 14 snd_usb_audio,snd_hwdep,snd_seq_oss,snd_hda_intel,snd_hda_codec,snd_rawmidi,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq,snd_seq_device,snd_timer
soundcore 8672 1 snd
pcspkr 4224 0
shpchp 34324 0
pci_hotplug 32576 1 shpchp
snd_page_alloc 10888 2 snd_hda_intel,snd_pcm
ath_rate_sample 14080 1
af_packet 23816 10
psmouse 38920 0
serio_raw 7940 0
parport_pc 36388 1
parport 36936 3 ppdev,lp,parport_pc
ath_pci 97312 0
wlan 204868 4 wlan_scan_sta,ath_rate_sample,ath_pci
iTCO_wdt 11812 0
iTCO_vendor_support 4868 1 iTCO_wdt
intel_agp 25244 1
agpgart 35400 2 nvidia,intel_agp
ath_hal 192592 3 ath_rate_sample,ath_pci
evdev 11008 3
tsdev 8768 0
ext3 133128 1
jbd 59816 1 ext3
mbcache 9604 1 ext3
sg 36252 0
sd_mod 23428 3
sr_mod 17060 0
cdrom 37664 1 sr_mod
ata_piix 15492 2
ata_generic 9092 0
libata 125720 2 ata_piix,ata_generic
scsi_mod 142348 6 sbp2,usb_storage,sg,sd_mod,sr_mod,libata
ohci1394 36528 0
e100 36232 0
mii 6528 1 e100
ieee1394 299448 2 sbp2,ohci1394
ehci_hcd 34188 0
generic 5124 0 [permanent]
uhci_hcd 25360 0
usbcore 134280 10 em28xx,snd_usb_audio,snd_usb_lib,usb_storage,usbhid,gspca,libusual,ehci_hcd,uhci_hcd
thermal 14856 0
processor 31048 1 thermal
fan 5636 0
fbcon 42656 0
tileblit 3584 1 fbcon
font 9216 1 fbcon
bitblit 6912 1 fbcon
softcursor 3200 1 bitblit
vesafb 9220 0
capability 5896 0
commoncap 8192 1 capabilityVoilà, je ne sais pas si ca peut aider mais je fais ce que je peux comprendre 
Dernière modification par milouzz (Le 24/07/2007, à 18:29)
Hors ligne
#3 Le 24/07/2007, à 11:38
- milouzz
Re : GROS problème qui me coûte cher {Terratec Cinergy XS}
Bon je l'ai déjà préciser, j'ai installer plusieurs choses, tel que build-essential libxine-extracodecs mercurial dvb-utils kaffeine v4l-dvb-experimental. etc
Mais il me semble en fin de compte que ce soit le sacan qui pose problème, lorsque j'effectues:
scan /usr/share/doc/dvb-utils/examples/scan/dvb-t/fr-Paris > channels.confET bien j'obtiens ca:
scanning /usr/share/doc/dvb-utils/examples/scan/dvb-t/fr-Paris
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
main:2247: FATAL: failed to open '/dev/dvb/adapter0/frontend0': 2 No such file or directoryDe plus, il y a bien une petite lumière jaune sur ma clé tuner USB qui m'indique qu'elle est détectée, mais Kaffeine ne l détecte pas, elle n'apparaît pas dedans;
je crois par ailleurs que Kaffeine doit contenir une section "Télévision numérique" et un menu "DVB", comme indiqué sur cette capture;
Mais chez moi, je n'ai rien de tout ca... 
Répondez moi pleeeease, j'oublies ce que j'ai dis, pas besoin d'être forcément clair; puis c'est pas que je suis pressé de voir la quotidienne de Secret Story, mais bon...
Dernière modification par milouzz (Le 24/07/2007, à 18:29)
Hors ligne
#4 Le 24/07/2007, à 19:03
- milouzz
Re : GROS problème qui me coûte cher {Terratec Cinergy XS}
Au risque de prendre le forum pour un chat... je continues mon enquête et après avoir suivis le tutorial ( http://doc.ubuntu-fr.org/materiel/terratec-cinergy-xs ), je pense que mon erreur se situe au niveau du de l'installation des modules suivants:
sudo modprobe em28xx
sudo modprobe em2880-dvbLorsque je copies ce dernier code dans mon terminale, j'obtiens l'erreur suivante:
make -C /home/erty/v4l-dvb/v4l installsudo modprobe em28xx
make[1]: entrant dans le répertoire « /home/erty/v4l-dvb/v4l »
make[1]: *** Pas de règle pour fabriquer la cible « installsudo ». Arrêt.
make[1]: quittant le répertoire « /home/erty/v4l-dvb/v4l »
make: *** [installsudo] Erreur 2Ce qui signifie que ca n'a probablement pas réussis...
HEEELP 
Hors ligne
#5 Le 25/07/2007, à 18:01
- milouzz
Re : GROS problème qui me coûte cher {Terratec Cinergy XS}
up
Hors ligne
#6 Le 25/07/2007, à 21:53
- milouzz
Re : GROS problème qui me coûte cher {Terratec Cinergy XS}
NO comment...
Je souhaitais savoir si avec Wine, cela pouvait marcher?
Car j'ai effectué l'installation du logiciel de visualisation normalement fait pour Windows, soit Cinergy Digital 3;
Mais lors du lancement de ce dernier, il y a une erreur qui me dit que certains filtres sont absents et qu'il ne détecte aucun périphérique de connexion...
Une idée sur le sujet?!
Hors ligne
#7 Le 25/07/2007, à 22:01
- kidlimonade
Re : GROS problème qui me coûte cher {Terratec Cinergy XS}
salut
tu as suivi mon tutoriel
si la diode verte s'allume c'est bon signe.
tu es sur d'avoir fait
sudo modprobe em2880-dvbessaie aussi en mode terminal (( applications>terminal)
sudo kaffeinepeut etre que c un probleme de droits comme dans ce cas ça affichera le menu dvb. tant qu'il ne s'affiche pas t'auras pas la tnt
tu as bien telechargé dvb-utils?
quant à scan /usr/share/doc/dvb-utils/examples/scan/dvb-t/fr-Paris > channels.conf c'est si tu habites paris et si tu veux utiliser xine,l'as tu installer ? lance xine au moins une fois préalablement
je te confirme cette carte marche tres bien ( terratec cinergy t xs usb j'ai pas l'hybrid)
Dernière modification par kidlimonade (Le 25/07/2007, à 22:11)
asus zenbook ux31a
Hors ligne
#8 Le 25/07/2007, à 22:42
- milouzz
Re : GROS problème qui me coûte cher {Terratec Cinergy XS}
YEEAAH, tu me redonnes espoir, je pensais que personne ne me répondrai... 
Alors, dans un premier temps, le premier tuto que j'ai suivis est le tiens, donc voilà... 
Après, j'ai bien fait
sudo modprobe em2880-dvbA ce moment là, on me demande mon Password, je le mets et rien ne s'affiche, j'en conclus que le module est chargé...
Pour ce qui est de Kaffeine, j'ai essayé en mode Terminal, et il y a bien des erreurs, mais je ne sais pas ce qu'elles veulent dire
[img=http://img411.imageshack.us/img411/3889/captureassistantdinstaljr1.th.png]
![[img=http://img411.imageshack.us/img411/3889/captureassistantdinstaljr1.th.png]](http://img411.imageshack.us/my.php?image=captureassistantdinstaljr1.png){kind=link}
(Désolé pour le reflet de l'utilitaire "Capture d'écran")
Au niveau des droits, je ne pense pas tout à fait comprendre, mais je sais que je suis l'administrateur de l'ordinateur 
Pour ce qui est de dvb-utils, je l'ai retéléchargé dans Synaptic;
Pour le scan, bien que je n'habites pas Paris, je n'habites pas loin, Versailles... :S
Et enfin pour Xine, j'ai installer dans Synaptic xine-ui (je ne sais pas si c'est la même chose), mais j'ai déjà tenté auparavant de lancer "Kaffeine-Xine" dans Kaffeine > Configuration > Moteur de lecture > Kaffeine-Xine
Bref, après toutes ces étapes, il me semble que rien n'a changé par rapport à avant.
Dernière modification par milouzz (Le 25/07/2007, à 22:45)
Hors ligne
#9 Le 25/07/2007, à 23:28
- milouzz
Re : GROS problème qui me coûte cher {Terratec Cinergy XS}
Petite précision, je n'ai pas non plus la Hybrid...
Hors ligne
#10 Le 26/07/2007, à 01:18
- milouzz
Re : GROS problème qui me coûte cher {Terratec Cinergy XS}
Sinon ill y a l'air d'avoir un tutoriel bien expliqué de ce côté ( http://mcentral.de/wiki/index.php/Em2880#Screenshots ) , mais malheuresement disponible qu'en anglais...
Quelqu'un voudrait bien me "traduire", où m'informer sur ce tutoriel, je ne suis vraiment pas doué en ce qui concerne cette langue
Hors ligne
#11 Le 26/07/2007, à 02:02
- milouzz
Re : GROS problème qui me coûte cher {Terratec Cinergy XS}
En fait je suis certain d'avoir trouver d'où viens l'erreur!!!
Après avoir lu à plusieurs reprises les tutoriels.etc, je suis persuadé du fait que le fameux module "em2880-dvb" ne peut pas être chargé!
En effet, les erreurs que je trouves lorsque je dois mettre quelque chose de spécifique dans mon terminale sont toujours en rapport avec ce fameux module "em2880-dvb";
Pour exemple lorsque je tentes de faire un scan
scanning /usr/share/doc/dvb-utils/examples/scan/dvb-t/fr-Paris
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
main:2247: FATAL: failed to open '/dev/dvb/adapter0/frontend0': 2 No such file or directoryMais de plus, j'ai également trouver une erreur semblable dans un autre Topic (http://forum.ubuntu-fr.org/viewtopic.php?id=117348), dans le post #10
benha21 dit:
J'ai réussi à avancer en mettant à jour le noyau vers la 2.6.20
mais je peux pas effectuer la dernière étape, à savoir :bass@bass-laptop:[/media/../img]$ sudo modprobe em2880-dvb FATAL: Module em2880_dvb not found. zsh: exit 1 sudo modprobe em2880-dvbDites moi si ça vous inspire, je vous tiens au courant de mon avancement.
On peut remarquer qu'il s'agit bien d'une erreur au module "em2880-dvb"
Bref tout ca pour en arriver à un autre message de benha21 qui nous dit dans le post #12:
J'ai recompilé les drivers em2880 et mnt j'ai pu loader le module em2880-dvbReprenons, étant débutant et procédant par étape, je découvres d'où vient l'erreur; alors ma question est simplement, comment recompiler les drivers em2880?!
Comment dois-je m'y prendre?!?:o
Bon c'était long, certes...
Mais je voulais être le plus clair (peut-être n'y suis-je pas arriver...) mais en tous cas le plus précis possible!
Merci de répondre à ma question
Hors ligne
#12 Le 26/07/2007, à 02:13
- milouzz
Re : GROS problème qui me coûte cher {Terratec Cinergy XS}
Petite déception, je ne suis pas sur qu'il s'agisse de ca comme le montre cette fenêtre après m'être servis d'un utilitaire appelé "modconf" étant apparement un programme de gestion des modules avec des "menus conviviaux".
Je me trompes?
Hors ligne
#13 Le 26/07/2007, à 02:22
- milouzz
Re : GROS problème qui me coûte cher {Terratec Cinergy XS}
Pardonnez moi, après j'arrête d'intervenir à tout va, mais cela m'étonnes, pour moi l'erreur vient toujours de là car comme le montre l'erreur lors du scan...
scanning /usr/share/doc/dvb-utils/examples/scan/dvb-t/fr-Paris
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
main:2247: FATAL: failed to open '/dev/dvb/adapter0/frontend0': 2 No such file or directory...et bien il est précisé qu'il ne réussis pas à trouver le dossier "dvb", et en effet, je ne le vois pas comme le montre l'image ci-dessous, on ne trouve pas la suite du chemin, soit ./dvb/adapter0/(...)
Me laissant ainsi penser que ce fichus module n'a pu être installé,d'où un répertoire absent alors qu'il aurait du être créé!
Dernière modification par milouzz (Le 26/07/2007, à 02:24)
Hors ligne
#14 Le 26/07/2007, à 06:52
- kidlimonade
Re : GROS problème qui me coûte cher {Terratec Cinergy XS}
salut
tu as écrit
bass@bass-laptop:[/media/../img]$ sudo modprobe em2880-dvb
FATAL: Module em2880_dvb not found.
zsh: exit 1 sudo modprobe em2880-dvbessaies
sudo modprobe em2880_dvbDernière modification par kidlimonade (Le 26/07/2007, à 06:55)
asus zenbook ux31a
Hors ligne
#15 Le 26/07/2007, à 09:50
- milouzz
Re : GROS problème qui me coûte cher {Terratec Cinergy XS}
Lordque je fais
sudo modprobe em2880_dvbJe reviens à la mêre erreur lors du scan, et toujours rien de nouveau concernant Kaffeine
Hors ligne
#16 Le 26/07/2007, à 10:47
- kidlimonade
Re : GROS problème qui me coûte cher {Terratec Cinergy XS}
salut
sudo apt-get install build-essentialpuis
recommence
à l'étape télécharger vl4
hg clone http://mcentral.de/hg/~mrec/v4l-dvb/
cd v4l-dvb/
make clean
make
sudo make installpeut etre il te faudra redemarrer et/ou brancher ta clé usb
asus zenbook ux31a
Hors ligne
#17 Le 26/07/2007, à 12:24
- milouzz
Re : GROS problème qui me coûte cher {Terratec Cinergy XS}
Non... Rien de nouveau, j'ai déjà fait tout ca :S
Mais est-ce qu'il existe des commandes spécifiques permettant de savoir si tel ou telle chose est active, marche, est détectée.etc ?:/
Afin que l'on puisse avoir des choses pertinantes, savoir d'où peut provenir l'erreur?
Ca devient dur quand même là...
Hors ligne
#18 Le 26/07/2007, à 14:08
- kidlimonade
Re : GROS problème qui me coûte cher {Terratec Cinergy XS}
fais dmesg
asus zenbook ux31a
Hors ligne
#19 Le 26/07/2007, à 14:32
- milouzz
Re : GROS problème qui me coûte cher {Terratec Cinergy XS}
dmesg
[ 23.193542] .init : 0xc03d9000 - 0xc042b000 ( 328 kB)
[ 23.193543] .data : 0xc02f2374 - 0xc03d36d4 ( 900 kB)
[ 23.193545] .text : 0xc0100000 - 0xc02f2374 (1992 kB)
[ 23.193548] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 23.270361] Calibrating delay using timer specific routine.. 5630.73 BogoMIPS (lpj=11261462)
[ 23.270404] Security Framework v1.0.0 initialized
[ 23.270409] SELinux: Disabled at boot.
[ 23.270426] Mount-cache hash table entries: 512
[ 23.270560] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000641d 00000000 00000000
[ 23.270569] monitor/mwait feature present.
[ 23.270571] using mwait in idle threads.
[ 23.270578] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 23.270581] CPU: L2 cache: 1024K
[ 23.270584] CPU: Physical Processor ID: 0
[ 23.270585] CPU: Processor Core ID: 0
[ 23.270588] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003180 0000641d 00000000 00000000
[ 23.270599] Compat vDSO mapped to ffffe000.
[ 23.270603] Remapping vsyscall page to ffffe000
[ 23.270619] Checking 'hlt' instruction... OK.
[ 23.286427] SMP alternatives: switching to UP code
[ 23.286795] Early unpacking initramfs... done
[ 23.580012] ACPI: Core revision 20060707
[ 23.585894] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 23.594974] CPU0: Intel(R) Pentium(R) D CPU 2.80GHz stepping 04
[ 23.594998] SMP alternatives: switching to SMP code
[ 23.595107] Booting processor 1/1 eip 3000
[ 23.605447] Initializing CPU#1
[ 23.685654] Calibrating delay using timer specific routine.. 5602.11 BogoMIPS (lpj=11204220)
[ 23.685664] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000641d 00000000 00000000
[ 23.685670] monitor/mwait feature present.
[ 23.685675] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 23.685677] CPU: L2 cache: 1024K
[ 23.685680] CPU: Physical Processor ID: 0
[ 23.685681] CPU: Processor Core ID: 1
[ 23.685683] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003180 0000641d 00000000 00000000
[ 23.685989] CPU1: Intel(R) Pentium(R) D CPU 2.80GHz stepping 04
[ 23.686025] Total of 2 processors activated (11232.84 BogoMIPS).
[ 23.686174] ENABLING IO-APIC IRQs
[ 23.686344] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 23.833455] checking TSC synchronization across 2 CPUs: passed.
[ 0.003992] Brought up 2 CPUs
[ 0.075312] migration_cost=548
[ 0.075591] Booting paravirtualized kernel on bare hardware
[ 0.075666] Time: 10:03:13 Date: 06/26/107
[ 0.075698] NET: Registered protocol family 16
[ 0.075790] EISA bus registered
[ 0.075795] ACPI: bus type pci registered
[ 0.100689] PCI: PCI BIOS revision 3.00 entry at 0xf1e60, last bus=2
[ 0.100691] PCI: Using configuration type 1
[ 0.100693] Setting up standard PCI resources
[ 0.109512] mtrr: your CPUs had inconsistent fixed MTRR settings
[ 0.109515] mtrr: probably your BIOS does not setup all CPUs.
[ 0.109517] mtrr: corrected configuration.
[ 0.121957] ACPI: Interpreter enabled
[ 0.121960] ACPI: Using IOAPIC for interrupt routing
[ 0.122781] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.122789] PCI: Probing PCI hardware (bus 00)
[ 0.123589] PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[ 0.123595] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.123904] Boot video device is 0000:01:00.0
[ 0.124142] PCI: Firmware left 0000:02:08.0 e100 interrupts enabled, disabling
[ 0.124227] PCI: Transparent bridge - 0000:00:1e.0
[ 0.124271] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.141599] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.145131] ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 0.145489] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.145842] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.146193] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.146544] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.146896] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.147249] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.147603] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.148015] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.148026] pnp: PnP ACPI init
[ 0.151483] pnp: PnP ACPI: found 12 devices
[ 0.151486] PnPBIOS: Disabled
[ 0.151539] PCI: Using ACPI for IRQ routing
[ 0.151542] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 0.169157] NET: Registered protocol family 8
[ 0.169159] NET: Registered protocol family 20
[ 0.169722] pnp: 00:08: ioport range 0x400-0x4bf could not be reserved
[ 0.170064] PCI: Bridge: 0000:00:01.0
[ 0.170067] IO window: d000-dfff
[ 0.170072] MEM window: fa000000-fcffffff
[ 0.170077] PREFETCH window: e0000000-efffffff
[ 0.170082] PCI: Bridge: 0000:00:1e.0
[ 0.170086] IO window: e000-efff
[ 0.170092] MEM window: fdd00000-fddfffff
[ 0.170097] PREFETCH window: fde00000-fdefffff
[ 0.170116] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.170123] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.170134] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.170168] NET: Registered protocol family 2
[ 0.207725] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.207852] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.208467] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.208763] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.208766] TCP reno registered
[ 0.219803] checking if image is initramfs... it is
[ 0.798966] Freeing initrd memory: 6769k freed
[ 0.799593] audit: initializing netlink socket (disabled)
[ 0.799608] audit(1185444193.544:1): initialized
[ 0.799726] highmem bounce pool size: 64 pages
[ 0.799827] VFS: Disk quotas dquot_6.5.1
[ 0.799848] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.799896] io scheduler noop registered
[ 0.799899] io scheduler anticipatory registered
[ 0.799902] io scheduler deadline registered
[ 0.799917] io scheduler cfq registered (default)
[ 8.786290] 0000:00:1d.7 EHCI: BIOS handoff failed (BIOS bug ?) 01010001
[ 8.786555] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 8.786599] assign_interrupt_mode Found MSI capability
[ 8.786603] Allocate Port Service[0000:00:01.0:pcie00]
[ 8.786777] isapnp: Scanning for PnP cards...
[ 9.137897] isapnp: No Plug & Play device found
[ 9.166888] Real Time Clock Driver v1.12ac
[ 9.166949] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 9.167653] mice: PS/2 mouse device common for all mice
[ 9.168353] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 9.168519] input: Macintosh mouse button emulation as /class/input/input0
[ 9.168562] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 9.168567] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 9.168775] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 9.168778] PNP: PS/2 controller doesn't have AUX irq; using default 12
[ 9.171496] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 9.171503] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 9.171635] EISA: Probing bus 0 at eisa.0
[ 9.171668] EISA: Detected 0 cards.
[ 9.193717] input: AT Translated Set 2 keyboard as /class/input/input1
[ 9.201706] TCP cubic registered
[ 9.201716] NET: Registered protocol family 1
[ 9.201742] Starting balanced_irq
[ 9.201750] Using IPI No-Shortcut mode
[ 9.201815] ACPI: (supports S0 S1 S3 S4 S5)
[ 9.201880] Magic number: 15:531:73
[ 9.202161] Freeing unused kernel memory: 328k freed
[ 9.205088] Time: tsc clocksource has been installed.
[ 10.427190] Capability LSM initialized
[ 10.464829] ACPI: Fan [FAN] (on)
[ 10.468586] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
[ 10.468597] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
[ 10.491810] ACPI: Thermal Zone [THRM] (40 C)
[ 10.912620] usbcore: registered new interface driver usbfs
[ 10.912644] usbcore: registered new interface driver hub
[ 10.912668] usbcore: registered new device driver usb
[ 10.913571] USB Universal Host Controller Interface driver v3.0
[ 10.913620] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 17
[ 10.913632] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 10.913636] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 10.913731] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 10.913759] uhci_hcd 0000:00:1d.0: irq 17, io base 0x0000ff00
[ 10.913868] usb usb1: configuration #1 chosen from 1 choice
[ 10.913896] hub 1-0:1.0: USB hub found
[ 10.913904] hub 1-0:1.0: 2 ports detected
[ 11.015405] ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 18
[ 11.015417] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 11.015422] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 11.015561] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 11.015591] uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000fe00
[ 11.016069] usb usb2: configuration #1 chosen from 1 choice
[ 11.016231] hub 2-0:1.0: USB hub found
[ 11.016240] hub 2-0:1.0: 2 ports detected
[ 11.036669] ieee1394: Initialized config rom entry `ip1394'
[ 11.079592] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
[ 11.079596] e100: Copyright(c) 1999-2006 Intel Corporation
[ 11.118802] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
[ 11.118815] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 11.118819] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 11.118848] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 11.118878] uhci_hcd 0000:00:1d.2: irq 19, io base 0x0000fd00
[ 11.118972] usb usb3: configuration #1 chosen from 1 choice
[ 11.119002] hub 3-0:1.0: USB hub found
[ 11.119009] hub 3-0:1.0: 2 ports detected
[ 11.222592] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 11.222602] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 11.222606] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 11.222634] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 11.222661] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fc00
[ 11.222755] usb usb4: configuration #1 chosen from 1 choice
[ 11.222787] hub 4-0:1.0: USB hub found
[ 11.222794] hub 4-0:1.0: 2 ports detected
[ 11.334240] SCSI subsystem initialized
[ 11.337017] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 17
[ 11.337398] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 11.337455] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 11.338746] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 11.339455] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[ 11.339618] ehci_hcd 0000:00:1d.7: irq 17, io mem 0xfdfff000
[ 11.343677] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 11.343837] libata version 2.20 loaded.
[ 11.347148] usb usb5: configuration #1 chosen from 1 choice
[ 11.348092] hub 5-0:1.0: USB hub found
[ 11.348257] hub 5-0:1.0: 8 ports detected
[ 11.358297] usb 2-1: new low speed USB device using uhci_hcd and address 2
[ 11.453080] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 11.505796] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[20] MMIO=[fddff000-fddff7ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 11.517061] ata_piix 0000:00:1f.1: version 2.10ac1
[ 11.517079] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 19
[ 11.517102] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 11.517841] ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001fb00 irq 14
[ 11.517873] ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001fb08 irq 15
[ 11.517900] scsi0 : ata_piix
[ 11.837862] ata1.00: ATAPI, max UDMA/33
[ 12.149061] usb 5-6: new high speed USB device using ehci_hcd and address 3
[ 12.288642] usb 5-6: configuration #1 chosen from 1 choice
[ 12.381025] ata1.00: configured for UDMA/33
[ 12.381039] scsi1 : ata_piix
[ 12.381104] ata2: port disabled. ignoring.
[ 12.712183] usb 2-1: new low speed USB device using uhci_hcd and address 3
[ 12.718002] scsi 0:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S182D SB06 PQ: 0 ANSI: 5
[ 12.719009] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 12.719043] ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 19 (level, low) -> IRQ 18
[ 12.719061] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 12.719098] ata3: SATA max UDMA/133 cmd 0x0001fa00 ctl 0x0001f902 bmdma 0x0001f600 irq 18
[ 12.719126] ata4: SATA max UDMA/133 cmd 0x0001f800 ctl 0x0001f702 bmdma 0x0001f608 irq 18
[ 12.719136] scsi2 : ata_piix
[ 12.780195] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d800004bbcb9]
[ 12.880118] ata3.00: ATA-7: ST3250823AS, 3.03, max UDMA/100
[ 12.880122] ata3.00: 488397168 sectors, multi 16: LBA48
[ 12.888098] ata3.00: configured for UDMA/100
[ 12.888112] scsi3 : ata_piix
[ 12.888645] usb 2-1: configuration #1 chosen from 1 choice
[ 13.053806] ATA: abnormal status 0x7F on port 0x0001f807
[ 13.053931] scsi 2:0:0:0: Direct-Access ATA ST3250823AS 3.03 PQ: 0 ANSI: 5
[ 13.054764] ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 13.074070] e100: eth0: e100_probe: addr 0xfddfe000, irq 20, MAC addr 00:13:D4:5A:6D:D3
[ 13.087174] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 13.087179] Uniform CD-ROM driver Revision: 3.20
[ 13.087229] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 13.087401] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
[ 13.087416] sda: Write Protect is off
[ 13.087419] sda: Mode Sense: 00 3a 00 00
[ 13.087439] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 13.087486] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
[ 13.087499] sda: Write Protect is off
[ 13.087502] sda: Mode Sense: 00 3a 00 00
[ 13.087522] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 13.087526] sda:<5>sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 13.092303] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 13.109571] sda1 sda2 <<6>usb 4-1: new full speed USB device using uhci_hcd and address 2
[ 13.132972] sda5 >
[ 13.133078] sd 2:0:0:0: Attached scsi disk sda
[ 13.291737] Attempting manual resume
[ 13.291741] swsusp: Resume From Partition 8:5
[ 13.291743] PM: Checking swsusp image.
[ 13.291934] PM: Resume from disk failed.
[ 13.308367] usb 4-1: configuration #1 chosen from 1 choice
[ 13.311393] usbcore: registered new interface driver hiddev
[ 13.324941] input: Logitech USB-PS/2 Optical Mouse as /class/input/input2
[ 13.324967] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-1
[ 13.324984] usbcore: registered new interface driver usbhid
[ 13.324987] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 13.325115] usbcore: registered new interface driver libusual
[ 13.328932] Initializing USB Mass Storage driver...
[ 13.329182] scsi4 : SCSI emulation for USB Mass Storage devices
[ 13.329242] usbcore: registered new interface driver usb-storage
[ 13.329246] USB Mass Storage support registered.
[ 13.329339] usb-storage: device found at 2
[ 13.329341] usb-storage: waiting for device to settle before scanning
[ 13.333929] kjournald starting. Commit interval 5 seconds
[ 13.333940] EXT3-fs: mounted filesystem with ordered data mode.
[ 18.321087] usb-storage: device scan complete
[ 18.324072] scsi 4:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 18.327070] scsi 4:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 18.330064] scsi 4:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 18.333059] scsi 4:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 18.377214] sd 4:0:0:0: Attached scsi removable disk sdb
[ 18.377260] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 18.420955] sd 4:0:0:1: Attached scsi removable disk sdc
[ 18.421002] sd 4:0:0:1: Attached scsi generic sg3 type 0
[ 18.464663] sd 4:0:0:2: Attached scsi removable disk sdd
[ 18.464700] sd 4:0:0:2: Attached scsi generic sg4 type 0
[ 18.508782] sd 4:0:0:3: Attached scsi removable disk sde
[ 18.508818] sd 4:0:0:3: Attached scsi generic sg5 type 0
[ 20.863599] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[ 21.798178] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 21.800051] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 21.956355] Linux agpgart interface v0.102 (c) Dave Jones
[ 21.957116] intel_rng: FWH not detected
[ 21.999448] agpgart: Detected an Intel 945G Chipset.
[ 22.016341] agpgart: AGP aperture is 256M @ 0x0
[ 22.162862] ath_hal: module license 'Proprietary' taints kernel.
[ 22.163672] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
[ 22.195342] NET: Registered protocol family 17
[ 22.247410] input: PC Speaker as /class/input/input3
[ 22.333087] iTCO_vendor_support: vendor-support=0
[ 22.334197] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[ 22.334316] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460)
[ 22.334361] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 22.607322] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 22.607333] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 22.607537] NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-9631 Thu Nov 9 17:38:10 PST 2006
[ 22.684701] wlan: 0.8.4.2 (0.9.3.1)
[ 22.704369] ath_pci: 0.9.4.5 (0.9.3.1)
[ 22.704427] ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 17 (level, low) -> IRQ 21
[ 23.412920] ath_rate_sample: 1.2 (0.9.3.1)
[ 23.413226] wifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 23.413238] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
[ 23.413243] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 23.413254] wifi0: turboA rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 23.413263] wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 23.413271] wifi0: H/W encryption support: WEP AES AES_CCM TKIP
[ 23.413276] wifi0: mac 10.5 phy 6.1 radio 6.3
[ 23.413281] wifi0: Use hw queue 1 for WME_AC_BE traffic
[ 23.413284] wifi0: Use hw queue 0 for WME_AC_BK traffic
[ 23.413286] wifi0: Use hw queue 2 for WME_AC_VI traffic
[ 23.413288] wifi0: Use hw queue 3 for WME_AC_VO traffic
[ 23.413290] wifi0: Use hw queue 8 for CAB traffic
[ 23.413292] wifi0: Use hw queue 9 for beacons
[ 23.427241] parport: PnPBIOS parport detected.
[ 23.427303] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 23.445654] wifi0: Atheros 5212: mem=0xfdde0000, irq=21
[ 23.487974] Linux video capture interface: v2.00
[ 23.617262] em28xx v4l2 driver version 0.0.1 loaded
[ 23.706720] em28xx new video device (0ccd:0043): interface 0, class 255
[ 23.706726] em28xx: device is attached to a USB 2.0 bus
[ 23.706728] em28xx: you're using the experimental/unstable tree from mcentral.de
[ 23.706730] em28xx: there's also a stable tree available but which is limited to
[ 23.706733] em28xx: linux <=2.6.19.2
[ 23.706735] em28xx: it's fine to use this driver but keep in mind that it will move
[ 23.706737] em28xx: to http://mcentral.de/hg/~mrec/v4l-dvb-kernel as soon as it's
[ 23.706739] em28xx: proved to be stable
[ 23.706743] em28xx #0: Alternate settings: 8
[ 23.706745] em28xx #0: Alternate setting 0, max size= 0
[ 23.706747] em28xx #0: Alternate setting 1, max size= 0
[ 23.706750] em28xx #0: Alternate setting 2, max size= 1448
[ 23.706752] em28xx #0: Alternate setting 3, max size= 2048
[ 23.706755] em28xx #0: Alternate setting 4, max size= 2304
[ 23.706757] em28xx #0: Alternate setting 5, max size= 2580
[ 23.706759] em28xx #0: Alternate setting 6, max size= 2892
[ 23.706761] em28xx #0: Alternate setting 7, max size= 3072
[ 23.748117] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 23.748135] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 23.797353] attach_inform: eeprom detected.
[ 23.824135] em28xx #0: i2c eeprom 00: 1a eb 67 95 cd 0c 43 00 c0 12 5c 00 9e 24 6a 34
[ 23.824149] em28xx #0: i2c eeprom 10: 00 00 06 57 02 0c 00 00 00 00 00 00 00 00 00 00
[ 23.824160] em28xx #0: i2c eeprom 20: 44 00 00 00 f0 10 01 00 00 00 00 00 5b 00 00 00
[ 23.824171] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 00 00 00 00 00 00
[ 23.824182] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 23.824193] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 23.824203] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 34 03 54 00 65 00
[ 23.824214] em28xx #0: i2c eeprom 70: 72 00 72 00 61 00 54 00 65 00 63 00 20 00 45 00
[ 23.824225] em28xx #0: i2c eeprom 80: 6c 00 65 00 63 00 74 00 72 00 6f 00 6e 00 69 00
[ 23.824236] em28xx #0: i2c eeprom 90: 63 00 20 00 47 00 6d 00 62 00 48 00 00 00 24 03
[ 23.824247] em28xx #0: i2c eeprom a0: 43 00 69 00 6e 00 65 00 72 00 67 00 79 00 20 00
[ 23.824259] em28xx #0: i2c eeprom b0: 54 00 20 00 55 00 53 00 42 00 20 00 58 00 53 00
[ 23.824270] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 23.824280] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 23.824290] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 23.824301] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 23.824312] EEPROM ID= 0x9567eb1a
[ 23.824314] Vendor/Product ID= 0ccd:0043
[ 23.824316] No audio on board.
[ 23.824317] 500mA max power
[ 23.824320] Table at 0x06, strings=0x249e, 0x346a, 0x0000
[ 23.826008] tuner 0-0061: chip found @ 0xc2 (em28xx #0)
[ 23.826064] attach inform (default): detected I2C address c2
[ 23.826069] /home/erty/v4l-dvb-kernel/v4l/tuner-core.c: setting tuner callback
[ 23.826071] /home/erty/v4l-dvb-kernel/v4l/tuner-core.c: setting tuner callback
[ 23.830629] tuner 0-0061: Tuner has no way to set tv freq
[ 23.830641] em28xx #0: Found Terratec Cinergy T XS
[ 23.830662] usbcore: registered new interface driver em28xx
[ 23.970668] hda_codec: Unknown model for ALC882, trying auto-probe from BIOS...
[ 23.978917] em2880-dvb.c: DVB Init
[ 24.082835] FIXME:em28xx_i2c_send_bytes(1e): write failed:
[ 24.082838] ===============================
[ 24.082840] 7f
[ 24.082842] ================================
[ 24.083210] zl10353_read_register: readreg error (reg=127, ret==-19)
[ 24.083237] em2880-dvb.c: failed initializing zl10353 DVB-T demodulator
[ 24.083240] em2880-dvb.c: retrying with mt352 DVB-T demodulator
[ 24.083583] FIXME:em28xx_i2c_send_bytes(1e): write failed:
[ 24.083585] ===============================
[ 24.083587] 7f
[ 24.083589] ================================
[ 24.083958] mt352_read_register: readreg error (reg=127, ret==-19)
[ 24.083985] em2880-dvb.c: no luck with mt352 demodulator, not attaching em2880-dvb
[ 24.083987] em2880-dvb.c: DVB-T demodulator not reachable, did you try "modprobe em28xx device_mode=1"
[ 24.083990] Em28xx: Initialized (Em2880 DVB Extension) extension
[ 24.219432] fuse init (API version 7.8)
[ 24.246796] lp0: using parport0 (interrupt-driven).
[ 24.302611] Adding 3028212k swap on /dev/disk/by-uuid/82a15e6f-97c4-4957-9676-d00998745923. Priority:-1 extents:1 across:3028212k
[ 24.550845] EXT3 FS on sda1, internal journal
[ 28.583140] PPP generic driver version 2.4.2
[ 28.616947] NET: Registered protocol family 10
[ 28.617058] lo: Disabled Privacy Extensions
[ 28.707080] NET: Registered protocol family 24
[ 29.094721] input: Power Button (FF) as /class/input/input4
[ 29.094763] ACPI: Power Button (FF) [PWRF]
[ 29.094819] input: Power Button (CM) as /class/input/input5
[ 29.094840] ACPI: Power Button (CM) [PWRB]
[ 29.111469] No dock devices found.
[ 29.195631] ibm_acpi: ec object not found
[ 29.310256] Using specific hotkey driver
[ 29.374342] pcc_acpi: loading...
[ 32.037666] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 35.783331] ppdev: user-space parallel port driver
[ 36.382215] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 36.382221] apm: disabled - APM is not SMP safe.
[ 36.524152] Bluetooth: Core ver 2.11
[ 36.524217] NET: Registered protocol family 31
[ 36.524220] Bluetooth: HCI device and connection manager initialized
[ 36.524223] Bluetooth: HCI socket layer initialized
[ 36.544150] Bluetooth: L2CAP ver 2.8
[ 36.544156] Bluetooth: L2CAP socket layer initialized
[ 36.600171] Bluetooth: RFCOMM socket layer initialized
[ 36.600186] Bluetooth: RFCOMM TTY layer initialized
[ 36.600189] Bluetooth: RFCOMM ver 1.8Hors ligne
#20 Le 26/07/2007, à 14:46
- kidlimonade
Re : GROS problème qui me coûte cher {Terratec Cinergy XS}
dans ton dmesg il est dit as tu essayé sudo modprobe em28xx device_mode=1
débranche
puis
sudo modprobe em28xx device_mode=1
sudo modprobe em2880-dvbrebranche et renvoie un dmesg ( juste la fin à partir de Linux video capture interface: v2.00
Dernière modification par kidlimonade (Le 26/07/2007, à 14:47)
asus zenbook ux31a
Hors ligne
#21 Le 26/07/2007, à 15:38
- milouzz
Re : GROS problème qui me coûte cher {Terratec Cinergy XS}
J'ai fais comme tu as dit:
[ 23.487974] Linux video capture interface: v2.00
[ 23.617262] em28xx v4l2 driver version 0.0.1 loaded
[ 23.706720] em28xx new video device (0ccd:0043): interface 0, class 255
[ 23.706726] em28xx: device is attached to a USB 2.0 bus
[ 23.706728] em28xx: you're using the experimental/unstable tree from mcentral.de
[ 23.706730] em28xx: there's also a stable tree available but which is limited to
[ 23.706733] em28xx: linux <=2.6.19.2
[ 23.706735] em28xx: it's fine to use this driver but keep in mind that it will move
[ 23.706737] em28xx: to http://mcentral.de/hg/~mrec/v4l-dvb-kernel as soon as it's
[ 23.706739] em28xx: proved to be stable
[ 23.706743] em28xx #0: Alternate settings: 8
[ 23.706745] em28xx #0: Alternate setting 0, max size= 0
[ 23.706747] em28xx #0: Alternate setting 1, max size= 0
[ 23.706750] em28xx #0: Alternate setting 2, max size= 1448
[ 23.706752] em28xx #0: Alternate setting 3, max size= 2048
[ 23.706755] em28xx #0: Alternate setting 4, max size= 2304
[ 23.706757] em28xx #0: Alternate setting 5, max size= 2580
[ 23.706759] em28xx #0: Alternate setting 6, max size= 2892
[ 23.706761] em28xx #0: Alternate setting 7, max size= 3072
[ 23.748117] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 23.748135] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 23.797353] attach_inform: eeprom detected.
[ 23.824135] em28xx #0: i2c eeprom 00: 1a eb 67 95 cd 0c 43 00 c0 12 5c 00 9e 24 6a 34
[ 23.824149] em28xx #0: i2c eeprom 10: 00 00 06 57 02 0c 00 00 00 00 00 00 00 00 00 00
[ 23.824160] em28xx #0: i2c eeprom 20: 44 00 00 00 f0 10 01 00 00 00 00 00 5b 00 00 00
[ 23.824171] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 00 00 00 00 00 00
[ 23.824182] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 23.824193] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 23.824203] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 34 03 54 00 65 00
[ 23.824214] em28xx #0: i2c eeprom 70: 72 00 72 00 61 00 54 00 65 00 63 00 20 00 45 00
[ 23.824225] em28xx #0: i2c eeprom 80: 6c 00 65 00 63 00 74 00 72 00 6f 00 6e 00 69 00
[ 23.824236] em28xx #0: i2c eeprom 90: 63 00 20 00 47 00 6d 00 62 00 48 00 00 00 24 03
[ 23.824247] em28xx #0: i2c eeprom a0: 43 00 69 00 6e 00 65 00 72 00 67 00 79 00 20 00
[ 23.824259] em28xx #0: i2c eeprom b0: 54 00 20 00 55 00 53 00 42 00 20 00 58 00 53 00
[ 23.824270] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 23.824280] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 23.824290] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 23.824301] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 23.824312] EEPROM ID= 0x9567eb1a
[ 23.824314] Vendor/Product ID= 0ccd:0043
[ 23.824316] No audio on board.
[ 23.824317] 500mA max power
[ 23.824320] Table at 0x06, strings=0x249e, 0x346a, 0x0000
[ 23.826008] tuner 0-0061: chip found @ 0xc2 (em28xx #0)
[ 23.826064] attach inform (default): detected I2C address c2
[ 23.826069] /home/erty/v4l-dvb-kernel/v4l/tuner-core.c: setting tuner callback
[ 23.826071] /home/erty/v4l-dvb-kernel/v4l/tuner-core.c: setting tuner callback
[ 23.830629] tuner 0-0061: Tuner has no way to set tv freq
[ 23.830641] em28xx #0: Found Terratec Cinergy T XS
[ 23.830662] usbcore: registered new interface driver em28xx
[ 23.970668] hda_codec: Unknown model for ALC882, trying auto-probe from BIOS...
[ 23.978917] em2880-dvb.c: DVB Init
[ 24.082835] FIXME:em28xx_i2c_send_bytes(1e): write failed:
[ 24.082838] ===============================
[ 24.082840] 7f
[ 24.082842] ================================
[ 24.083210] zl10353_read_register: readreg error (reg=127, ret==-19)
[ 24.083237] em2880-dvb.c: failed initializing zl10353 DVB-T demodulator
[ 24.083240] em2880-dvb.c: retrying with mt352 DVB-T demodulator
[ 24.083583] FIXME:em28xx_i2c_send_bytes(1e): write failed:
[ 24.083585] ===============================
[ 24.083587] 7f
[ 24.083589] ================================
[ 24.083958] mt352_read_register: readreg error (reg=127, ret==-19)
[ 24.083985] em2880-dvb.c: no luck with mt352 demodulator, not attaching em2880-dvb
[ 24.083987] em2880-dvb.c: DVB-T demodulator not reachable, did you try "modprobe em28xx device_mode=1"
[ 24.083990] Em28xx: Initialized (Em2880 DVB Extension) extension
[ 24.219432] fuse init (API version 7.8)
[ 24.246796] lp0: using parport0 (interrupt-driven).
[ 24.302611] Adding 3028212k swap on /dev/disk/by-uuid/82a15e6f-97c4-4957-9676-d00998745923. Priority:-1 extents:1 across:3028212k
[ 24.550845] EXT3 FS on sda1, internal journal
[ 28.583140] PPP generic driver version 2.4.2
[ 28.616947] NET: Registered protocol family 10
[ 28.617058] lo: Disabled Privacy Extensions
[ 28.707080] NET: Registered protocol family 24
[ 29.094721] input: Power Button (FF) as /class/input/input4
[ 29.094763] ACPI: Power Button (FF) [PWRF]
[ 29.094819] input: Power Button (CM) as /class/input/input5
[ 29.094840] ACPI: Power Button (CM) [PWRB]
[ 29.111469] No dock devices found.
[ 29.195631] ibm_acpi: ec object not found
[ 29.310256] Using specific hotkey driver
[ 29.374342] pcc_acpi: loading...
[ 32.037666] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 35.783331] ppdev: user-space parallel port driver
[ 36.382215] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 36.382221] apm: disabled - APM is not SMP safe.
[ 36.524152] Bluetooth: Core ver 2.11
[ 36.524217] NET: Registered protocol family 31
[ 36.524220] Bluetooth: HCI device and connection manager initialized
[ 36.524223] Bluetooth: HCI socket layer initialized
[ 36.544150] Bluetooth: L2CAP ver 2.8
[ 36.544156] Bluetooth: L2CAP socket layer initialized
[ 36.600171] Bluetooth: RFCOMM socket layer initialized
[ 36.600186] Bluetooth: RFCOMM TTY layer initialized
[ 36.600189] Bluetooth: RFCOMM ver 1.8
[12689.323278] usb 5-6: USB disconnect, address 3
[12716.888362] usb 5-6: new high speed USB device using ehci_hcd and address 5
[12717.028263] usb 5-6: configuration #1 chosen from 1 choice
[12717.028443] em28xx new video device (0ccd:0043): interface 0, class 255
[12717.028450] em28xx: device is attached to a USB 2.0 bus
[12717.028453] em28xx: you're using the experimental/unstable tree from mcentral.de
[12717.028458] em28xx: there's also a stable tree available but which is limited to
[12717.028460] em28xx: linux <=2.6.19.2
[12717.028463] em28xx: it's fine to use this driver but keep in mind that it will move
[12717.028467] em28xx: to http://mcentral.de/hg/~mrec/v4l-dvb-kernel as soon as it's
[12717.028472] em28xx: proved to be stable
[12717.028478] em28xx #0: Alternate settings: 8
[12717.028482] em28xx #0: Alternate setting 0, max size= 0
[12717.028486] em28xx #0: Alternate setting 1, max size= 0
[12717.028490] em28xx #0: Alternate setting 2, max size= 1448
[12717.028494] em28xx #0: Alternate setting 3, max size= 2048
[12717.028498] em28xx #0: Alternate setting 4, max size= 2304
[12717.028503] em28xx #0: Alternate setting 5, max size= 2580
[12717.028507] em28xx #0: Alternate setting 6, max size= 2892
[12717.028511] em28xx #0: Alternate setting 7, max size= 3072
[12717.111659] attach_inform: eeprom detected.
[12717.138334] em28xx #0: i2c eeprom 00: 1a eb 67 95 cd 0c 43 00 c0 12 5c 00 9e 24 6a 34
[12717.138348] em28xx #0: i2c eeprom 10: 00 00 06 57 02 0c 00 00 00 00 00 00 00 00 00 00
[12717.138359] em28xx #0: i2c eeprom 20: 44 00 00 00 f0 10 01 00 00 00 00 00 5b 00 00 00
[12717.138370] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 00 00 00 00 00 00
[12717.138381] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[12717.138392] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[12717.138402] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 34 03 54 00 65 00
[12717.138413] em28xx #0: i2c eeprom 70: 72 00 72 00 61 00 54 00 65 00 63 00 20 00 45 00
[12717.138424] em28xx #0: i2c eeprom 80: 6c 00 65 00 63 00 74 00 72 00 6f 00 6e 00 69 00
[12717.138435] em28xx #0: i2c eeprom 90: 63 00 20 00 47 00 6d 00 62 00 48 00 00 00 24 03
[12717.138446] em28xx #0: i2c eeprom a0: 43 00 69 00 6e 00 65 00 72 00 67 00 79 00 20 00
[12717.138457] em28xx #0: i2c eeprom b0: 54 00 20 00 55 00 53 00 42 00 20 00 58 00 53 00
[12717.138468] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[12717.138478] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[12717.138489] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[12717.138499] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[12717.138510] EEPROM ID= 0x9567eb1a
[12717.138512] Vendor/Product ID= 0ccd:0043
[12717.138514] No audio on board.
[12717.138515] 500mA max power
[12717.138518] Table at 0x06, strings=0x249e, 0x346a, 0x0000
[12717.140209] tuner 0-0061: chip found @ 0xc2 (em28xx #0)
[12717.140242] attach inform (default): detected I2C address c2
[12717.140246] /home/erty/v4l-dvb-kernel/v4l/tuner-core.c: setting tuner callback
[12717.140249] /home/erty/v4l-dvb-kernel/v4l/tuner-core.c: setting tuner callback
[12717.144579] tuner 0-0061: Tuner has no way to set tv freq
[12717.144585] em2880-dvb.c: DVB Init
[12717.248156] FIXME:em28xx_i2c_send_bytes(1e): write failed:
[12717.248161] ===============================
[12717.248163] 7f
[12717.248166] ================================
[12717.248530] zl10353_read_register: readreg error (reg=127, ret==-19)
[12717.248562] em2880-dvb.c: failed initializing zl10353 DVB-T demodulator
[12717.248565] em2880-dvb.c: retrying with mt352 DVB-T demodulator
[12717.248903] FIXME:em28xx_i2c_send_bytes(1e): write failed:
[12717.248905] ===============================
[12717.248907] 7f
[12717.248909] ================================
[12717.249279] mt352_read_register: readreg error (reg=127, ret==-19)
[12717.249312] em2880-dvb.c: no luck with mt352 demodulator, not attaching em2880-dvb
[12717.249314] em2880-dvb.c: DVB-T demodulator not reachable, did you try "modprobe em28xx device_mode=1"
[12717.249318] em28xx #0: Found Terratec Cinergy T XSHors ligne
#22 Le 26/07/2007, à 17:32
- milouzz
Re : GROS problème qui me coûte cher {Terratec Cinergy XS}
En fait, peut-être que je mélanges un peu tout mais j'ai trouvé ce lien
> http://vdr.bluox.org/vdr-v4l-dvb.htm
Et j'ai retenté l'installation du driver v4l-dvb avec leur méthode, comme ca par curiosité...
J'ai donc tapé dans mon terminale
cd /usr/src
apt-get update && apt-get install mercurial
hg clone http://linuxtv.org/hg/v4l-dvb
wget http://vdr.bluox.org/d/DVB/dvb-cwidx-v4l-dvb.diff
cd v4l-dvb
patch <../dvb-cwidx-v4l-dvb.diff -p0
make
make installEt cela m'a donné ca
erty@erty-desktop:~$ cd /usr/src
erty@erty-desktop:/usr/src$ apt-get update && apt-get install mercurial
E: Impossible d'ouvrir le fichier verrou /var/lib/apt/lists/lock - open (13 Permission non accordée)
E: Impossible de verrouiller le répertoire de liste
erty@erty-desktop:/usr/src$ hg clone http://linuxtv.org/hg/v4l-dvb
destination directory: v4l-dvb
abort: Permission denied: v4l-dvb
erty@erty-desktop:/usr/src$ wget http://vdr.bluox.org/d/DVB/dvb-cwidx-v4l-dvb.diff
--17:28:51-- http://vdr.bluox.org/d/DVB/dvb-cwidx-v4l-dvb.diff
=> `dvb-cwidx-v4l-dvb.diff'
Résolution de vdr.bluox.org... 194.146.225.81
Connexion vers vdr.bluox.org|194.146.225.81|:80... connecté.
requête HTTP transmise, en attente de la réponse... 200 OK
Longueur: 2 954 (2.9K) [text/plain]
dvb-cwidx-v4l-dvb.diff: Permission non accordée
Ne peut écrire dans « dvb-cwidx-v4l-dvb.diff » (Permission non accordée).
erty@erty-desktop:/usr/src$ cd v4l-dvb
bash: cd: v4l-dvb: Aucun fichier ou répertoire de ce type
erty@erty-desktop:/usr/src$ patch <../dvb-cwidx-v4l-dvb.diff -p0
bash: ../dvb-cwidx-v4l-dvb.diff: Aucun fichier ou répertoire de ce type
erty@erty-desktop:/usr/src$ make
make: *** Pas de cibles spécifiées et aucun makefile n'a été trouvé. Arrêt.Cela m'a simplement fait pensé à ce que tu m'as dit précédemment kidlimonade, tu as dans un de tes post parlé d'un problème de droits, et dans cette dernière erreur, je vois pleins de "permission non accordée" ou "permission denied"
peut etre que c un probleme de droits comme dans ce cas ça affichera le menu dvb. tant qu'il ne s'affiche pas t'auras pas la tntVoilà... Je ne sais pas s'il y a un rapport?
Dernière modification par milouzz (Le 26/07/2007, à 17:33)
Hors ligne
#23 Le 26/07/2007, à 17:44
- kidlimonade
Re : GROS problème qui me coûte cher {Terratec Cinergy XS}
redémarre on sait jamais
relance kaffeine et regarde si t'as l'onglet dvb
si ça marche pas je cale faudra attendre l'aide d'autres personnes
moi ma carte ç a marché du premier coup
y a un wiki ici https://wiki.ubuntu.com/em28xx
et une liste discussion http://mcentral.de/wiki/index.php/Talk:Em2880
Dernière modification par kidlimonade (Le 26/07/2007, à 17:49)
asus zenbook ux31a
Hors ligne
#24 Le 26/07/2007, à 17:51
- kidlimonade
Re : GROS problème qui me coûte cher {Terratec Cinergy XS}
pour les droits il faut faire dans une console
sudo kaffeinetu as alors tous les droits pour tester
Dernière modification par kidlimonade (Le 26/07/2007, à 17:51)
asus zenbook ux31a
Hors ligne
#25 Le 26/07/2007, à 18:15
- milouzz
Re : GROS problème qui me coûte cher {Terratec Cinergy XS}
ooook, alors maintenant j'ai redémarré, toujours pas d'onglet DVB sur Kaffeine, et j'ai retenté "sudo kaffeine" dans mon terminal, et j'obtiens ca maintenant...
X Error: BadDevice, invalid or uninitialized input device 169
Major opcode: 147
Minor opcode: 3
Resource id: 0x0
Failed to open device
X Error: BadDevice, invalid or uninitialized input device 169
Major opcode: 147
Minor opcode: 3
Resource id: 0x0
Failed to open device
ERROR: Communication problem with kaffeine, it probably crashed.Bon dans tous les cas, je te remercie infinimment d'avoir tenté de m'aider kidlimonade
Tu as été patient
Hors ligne