#1 Le 05/08/2007, à 12:23
- koro
boot zenwalk grub = kernel panic
salut tout le monde,
j'ai essayé d'ajouter Zenwalk (installer sur mon second disque dur), via mon menu.lst (grub) de Ubuntu:
title Zenwalk
root (hd1,0)
kernel /boot/vmlinuz root=/dev/sdb
je redémare, puis j'essaie de booter sur Zenwalk, j'ai droit a un message d'erreur comme celui ci:
UDF-fs: No partition found (1)
No filesystem could mount root, tried: reiserfs ext3 ext2 iso9660 udf xfs
Kernel Panic -not syncing: VSF: Unable to mount root fs on unknow-block (8,16).
Je pense qu'il manque des lignes dans mon menu.lst. si quelqu'un veut bien m'aider, Svp ?
#2 Le 05/08/2007, à 12:47
- koro
Re : boot zenwalk grub = kernel panic
J'ai essayé un:
title Zenwalk 4.4.1
root (hd1,0)
kernel /boot/vmlinuz-2.6.21 root=/dev/sda10 quiet splash
initrd /boot/initrd.splash
boot
et cette fois ci j'ai droit a un:
FILE NOT FOUND
je ne sais plus trop quoi faire (...)
#3 Le 05/08/2007, à 12:59
- belga
Re : boot zenwalk grub = kernel panic
poste le retour de
sudo fdisk -l
puis tape
sudo grub
grub> find /boot/grub/stage1 #poste le retour
grub> find /grub/stage1 #poste le retour
grub> quit
Multi-bomb : Multi-doze : Mandoze, Ubundoze, Pardoze.
900s entre deux postes: mododoze
Hors ligne
#4 Le 05/08/2007, à 13:06
- koro
Re : boot zenwalk grub = kernel panic
sudo fdisk -l :
Périphérique Amorce Début Fin Blocs Id Système
/dev/sda1 * 1 510 4096574+ 83 Linux
/dev/sda2 511 638 1028160 82 Linux swap / Solaris
/dev/sda3 639 9729 73023457+ 83 Linux
Disque /dev/sdb: 80.0 Go, 80026361856 octets
255 têtes, 63 secteurs/piste, 9729 cylindres
Unités = cylindres de 16065 * 512 = 8225280 octets
Périphérique Amorce Début Fin Blocs Id Système
/dev/sdb1 * 1 9355 75144006 83 Linux
/dev/sdb2 9356 9729 3004155 5 Extended
/dev/sdb5 9356 9729 3004123+ 82 Linux swap / Solaris
grub> find /boot/grub/stage1
Error 15: File not found
grub> find /grub/stage1
Error 15: File not found
#5 Le 05/08/2007, à 13:20
- belga
Re : boot zenwalk grub = kernel panic
tu bootes sur quel disque?
Error 15, grub ne trouve rien, tu as zenwalk et ubuntu?
tu arrives à booter sur ubuntu?
Moi je suppose que tu es en live: sinon tu adaptes la suite
on va monter sdb1
sudo mkdir /panne
sudo mount -o rw /dev/sdb1 /panne
poste les retours de
cat /panne/boot/grub/menu.lst
ls /panne/boot/grub
ls /panne/boot
Au fait
title Zenwalk 4.4.1
root (hd1,0)
kernel /boot/vmlinuz-2.6.21 root=/dev/sda10 quiet splash
initrd /boot/initrd.splash
boot
tu n'as pas de sda10, c'est sdb1.
Dernière modification par belga (Le 05/08/2007, à 13:22)
Multi-bomb : Multi-doze : Mandoze, Ubundoze, Pardoze.
900s entre deux postes: mododoze
Hors ligne
#6 Le 05/08/2007, à 14:03
- koro
Re : boot zenwalk grub = kernel panic
cat /panne/boot/grub/menu.lst :
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not change this entry to 'saved' or your
# array will desync and will not let you boot your system.
default 0
#hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=6d0a0b11-ae5f-4516-bfcd-69260d6a9c1b ro nmi_watchdog=0
## Setup crashdump menu entries
## e.g. crashdump=1
# crashdump=0
## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,0)
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## ## End Default Options ##
splashimage=(hd0,0)/boot/grub/splashimages/tuxos.xpm.gz
title Ubuntu, kernel 2.6.20-16-generic
root (hd0,0)
kernel /boot/vmlinuz-2.6.20-16-generic root=UUID=6d0a0b11-ae5f-4516-bfcd-69260d6a9c1b ro nmi_watchdog=0 quiet splash
initrd /boot/initrd.img-2.6.20-16-generic
quiet
savedefault
title Ubuntu, kernel 2.6.20-16-generic (recovery mode)
root (hd0,0)
kernel /boot/vmlinuz-2.6.20-16-generic root=UUID=6d0a0b11-ae5f-4516-bfcd-69260d6a9c1b ro nmi_watchdog=0 single
initrd /boot/initrd.img-2.6.20-16-generic
title Ubuntu, kernel 2.6.20-15-generic
root (hd0,0)
kernel /boot/vmlinuz-2.6.20-15-generic root=UUID=6d0a0b11-ae5f-4516-bfcd-69260d6a9c1b ro nmi_watchdog=0 quiet splash
initrd /boot/initrd.img-2.6.20-15-generic
quiet
savedefault
title Ubuntu, kernel 2.6.20-15-generic (recovery mode)
root (hd0,0)
kernel /boot/vmlinuz-2.6.20-15-generic root=UUID=6d0a0b11-ae5f-4516-bfcd-69260d6a9c1b ro nmi_watchdog=0 single
initrd /boot/initrd.img-2.6.20-15-generic
title Ubuntu, memtest86+
root (hd0,0)
kernel /boot/memtest86+.bin
quiet
title Zenwalk 4.4.1
root (hd1,0)
kernel /boot/vmlinuz root=/dev/sdb1 ro
initrd /boot/initrd.splash
boot
ls /panne/boot/grub :
default installed-version minix_stage1_5 stage2
device.map jfs_stage1_5 reiserfs_stage1_5 xfs_stage1_5
e2fs_stage1_5 menu.lst splashimages
fat_stage1_5 menu.lst~ stage1
ls /panne/boot :
abi-2.6.20-15-generic initrd.img-2.6.20-16-generic
abi-2.6.20-16-generic memtest86+.bin
config-2.6.20-15-generic System.map-2.6.20-15-generic
config-2.6.20-16-generic System.map-2.6.20-16-generic
grub vmlinuz-2.6.20-15-generic
initrd.img-2.6.20-15-generic vmlinuz-2.6.20-16-generic
Je précise, que Zenwalk utilise Lilo, et que peut être je pourrais configurer Ubuntu sur LILO ?
Peut être qu'il faut que je démarre mon ordinateur depuis Zenwalk et LILO ?
(celà reste une solution, si je n'y arrive pas avec GRUB d'Ubuntu ).
J'espère ne pas être trop confus.
#7 Le 05/08/2007, à 14:13
- belga
Re : boot zenwalk grub = kernel panic
bah il faut répondre aux questions
tu bootes sur quel disque?
Error 15, grub ne trouve rien, tu as zenwalk et ubuntu?
tu arrives à booter sur ubuntu?
Chose bizarre, le menu.lst que tu as posté (/dev/sdb1) c'est celui d'ubuntu?
remplace /panne par /panne1 et sdb1 par sda1 dans le message 5.
Multi-bomb : Multi-doze : Mandoze, Ubundoze, Pardoze.
900s entre deux postes: mododoze
Hors ligne
#8 Le 05/08/2007, à 14:28
- koro
Re : boot zenwalk grub = kernel panic
Je boot sur le disque (hd0,0), et je suis actuellement sur Ubuntu.
Oui j'ai Zenwalk et Ubuntu
Oui j'arrive a booter sur Ubuntu.
Je n'arrive pas a booter sur Zenwalk via le menu grub, par contre sans grub j'y arrive. (en choisissant depuis le bios).
#9 Le 05/08/2007, à 14:38
- belga
Re : boot zenwalk grub = kernel panic
je ne comprens pas deux choses
1- on a monté sdb1 contenant zenwal sur /panne. Or le menu.lst
est celui d'ubuntu?
2- grub ne trouve pas /boot/grub/stage1
réessaye
sudo grub (un fois que tu vois grub> continue)
find /boot/grub/stage1
quit
A faire
remplace /panne par /panne1 et sdb1 par sda1 dans le message 5.
poste
cat /boot/grub/devive.map
Multi-bomb : Multi-doze : Mandoze, Ubundoze, Pardoze.
900s entre deux postes: mododoze
Hors ligne
#10 Le 05/08/2007, à 14:57
- koro
Re : boot zenwalk grub = kernel panic
find /boot/grub/stage1
grub> find /boot/grub/stage1
(hd1,0)
grub>
cat /boot/grub/devive.map:
cat: /boot/grub/devive.map: Aucun fichier ou répertoire de ce type
j'ai même essayé:
pwet@ubuntu:/$ cd /panne1/
pwet@ubuntu:/panne1$ cat /boot/grub/devive.map
cat: /boot/grub/devive.map: Aucun fichier ou répertoire de ce type
pwet@ubuntu:/panne1$
#11 Le 05/08/2007, à 14:58
- koro
Re : boot zenwalk grub = kernel panic
Or le menu.lst est celui d'ubuntu?
Oui c'est bien celui d'Ubuntu. Encore désolé pour le manque de précision de ma part.
#12 Le 05/08/2007, à 15:03
- belga
Re : boot zenwalk grub = kernel panic
erreur de ma part device au lieu de devive
cat /boot/grub/device.map
Alors ubuntu est installé sur sdb1
Alors que donne (tu montes sda1 sur panne1, je pense que tu l('as déjà fait)
cat /panne1/etc/lilo.conf
Multi-bomb : Multi-doze : Mandoze, Ubundoze, Pardoze.
900s entre deux postes: mododoze
Hors ligne
#13 Le 05/08/2007, à 15:28
- koro
Re : boot zenwalk grub = kernel panic
pwet@ubuntu:~$ cat /boot/grub/device.map
(hd0) /dev/sda
pwet@ubuntu:~$ cat /panne1/etc/lilo.conf
# LILO configuration file
# generated by 'liloconfig'
#
# Start LILO global section
append="resume=/dev/sda2 splash=silent tom"
boot = /dev/sda
bitmap=/boot/splash.bmp
bmp-table=234p,348p,1,4
bmp-colors=220,0,,255,220,
bmp-timer=539p,396p,220,0,
prompt
timeout = 50
# Override dangerous defaults that rewrite the partition table:
change-rules
reset
# VESA framebuffer console @ 1280x1024x64k
vga = 794
# Normal VGA console
# vga = normal
# VESA framebuffer console @ 1024x768x64k
# vga=791
# VESA framebuffer console @ 1024x768x32k
# vga=790
# VESA framebuffer console @ 1024x768x256
# vga=773
# VESA framebuffer console @ 800x600x64k
# vga=788
# VESA framebuffer console @ 800x600x32k
# vga=787
# VESA framebuffer console @ 800x600x256
# vga=771
# VESA framebuffer console @ 640x480x64k
# vga=785
# VESA framebuffer console @ 640x480x32k
# vga=784
# VESA framebuffer console @ 640x480x256
# vga=769
# End LILO global section
# Linux bootable partition config begins
image = /boot/vmlinuz
root = /dev/sda1
label = Zenwalk
initrd = /boot/initrd.splash
read-only
# Linux bootable partition config ends
tom@ubuntu:~$
#14 Le 05/08/2007, à 15:48
- belga
Re : boot zenwalk grub = kernel panic
comme tu vois zenwalk est sur sda et ubuntu sur sdb
puisque lilo est sur /panne1 et menu.lst sur /panne.
Mais d'autre part, sda est vu comme hd0 par grub, il y a
un mic mac.
As tu débranché le disque ubuntu pour
installer zenwalk?
Multi-bomb : Multi-doze : Mandoze, Ubundoze, Pardoze.
900s entre deux postes: mododoze
Hors ligne
#15 Le 05/08/2007, à 16:20
- koro
Re : boot zenwalk grub = kernel panic
As tu débranché le disque ubuntu pour installer zenwalk?
non, j'ai installé sur un disque dur a part.
#16 Le 05/08/2007, à 16:24
- belga
Re : boot zenwalk grub = kernel panic
depuis ubuntu, tu tape (on va regarder comment grub voit tes partitions)
sudo grub
null (hd tape alors sur la touche tab et poste le retour
null (hd0, tape alors sur la touche tab et poste le retour
null (hd1, tape alors sur la touche tab et poste le retour
quit
Dernière modification par belga (Le 05/08/2007, à 17:57)
Multi-bomb : Multi-doze : Mandoze, Ubundoze, Pardoze.
900s entre deux postes: mododoze
Hors ligne
#17 Le 06/08/2007, à 00:15
- koro
Re : boot zenwalk grub = kernel panic
Hey, super monsieur, grâce a vous mon DualBoot fonctionne ...
J'ai remplacé les trucs comme ils fallaient, en fait je ne savais pas a la base les numéros de mes disques dur ...
Donc voilà super, tant que ça fonctionne, c'est ça l'important !
Mille merci a toi, tu es génial !
Thank you very much
#18 Le 07/08/2007, à 12:58
- belga
Re : boot zenwalk grub = kernel panic
Pourquoi tu ne décris pas ce que tu as fait,
histoire que les lecteurs puissent comprendre
et ainsi ne pas poster.
Multi-bomb : Multi-doze : Mandoze, Ubundoze, Pardoze.
900s entre deux postes: mododoze
Hors ligne