Ubuntu-fr

melimesmots

HELP! AUCUN PERIFERIQUE NE FONCTIONNE, lecteur cdrom, disquette, ect..

Salut à tous !

                  Je vais carrement poster un nouveau sujet, en fait, je n'arrive pas à monter mes périfériques et cela fait une semaine que je recherche. Le système d'exploitation que j'utilise est ubuntu je, passé en kubuntu, cd, usb, disquette, rien ne fonctionne, je vais laisser quelques résultats que j'ai obtenue dans un terminal, si une personne peu m'aider:( bien sûr cela n'a jamais fonctionner de puis qie je suis sur linux dont je suis néophite)

En premier lieu, le résultat de mon fstab:

# /etc/fstab: static file system information.
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    defaults        0       0
# /dev/sda1
UUID=02786427-a2d3-457f-85e6-633b9493b2be /               ext3    defaults,errors=remount-ro 0       1
# /dev/sda5
UUID=050e1099-46fa-48c3-9872-e6bb8db2e773 none            swap    sw              0       0
/dev/scd0       /media/cdrom0   udf,iso9660 user,noauto     0       0
/dev/fd0        /media/floppy0  auto    rw,user,noauto  0       0

le résulatat du mount

mount/dev/scd0 a écrit:

mount:Aucun medium trouvé

le résultat de  ls -l /dev/cd*

 :" lrwxrwxrwx 1 root root 4 2007-08-06 06:43 /dev/cdrom -> scd0"

le résultat de ls -l /dev/scd*

brw-rw---- 1 root cdrom 11, 0 2007-08-06 06:42 /dev/scd0

le résultat de dmesg est

[    0.000000] Linux version 2.6.20-16-generic (root@terranova) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Thu Jun 7 20:19:32 UTC 2007 (Ubuntu 2.6.20-16.29-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] sanitize start
[    0.000000] sanitize end
[    0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
[    0.000000] copy_e820_map() type is E820_RAM
[    0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
[    0.000000] copy_e820_map() start: 00000000000e0000 size: 0000000000020000 end: 0000000000100000 type: 2
[    0.000000] copy_e820_map() start: 0000000000100000 size: 000000001fde0000 end: 000000001fee0000 type: 1
[    0.000000] copy_e820_map() type is E820_RAM
[    0.000000] copy_e820_map() start: 000000001fee0000 size: 0000000000010000 end: 000000001fef0000 type: 3
[    0.000000] copy_e820_map() start: 000000001fef0000 size: 0000000000010000 end: 000000001ff00000 type: 4
[    0.000000] copy_e820_map() start: 000000001ff00000 size: 0000000000100000 end: 0000000020000000 type: 2
[    0.000000] copy_e820_map() start: 00000000fff80000 size: 0000000000080000 end: 0000000100000000 type: 2
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000001fee0000 (usable)
[    0.000000]  BIOS-e820: 000000001fee0000 - 000000001fef0000 (ACPI data)
[    0.000000]  BIOS-e820: 000000001fef0000 - 000000001ff00000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000001ff00000 - 0000000020000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 510MB LOWMEM available.
[    0.000000] Entering add_active_range(0, 0, 130784) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   130784
[    0.000000]   HighMem    130784 ->   130784
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   130784
[    0.000000] On node 0 totalpages: 130784
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 989 pages used for memmap
[    0.000000]   Normal zone: 125699 pages, LIFO batch:31
[    0.000000]   HighMem zone: 0 pages used for memmap
[    0.000000] DMI 2.3 present.
[    0.000000] ACPI: RSDP (v000 AMI                                   ) @ 0x000fc0b0
[    0.000000] ACPI: RSDT (v001 MEIP01          0x00000009 MSFT 0x00000097) @ 0x1fee0000
[    0.000000] ACPI: FADT (v001 MICRON FACPTBL  0x00000031 MSFT 0x00000031) @ 0x1fee0030
[    0.000000] ACPI: DSDT (v001  INTEL  WHITNEY 0x00001000 MSFT 0x0100000b) @ 0x00000000
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dff80000)
[    0.000000] Detected 868.220 MHz processor.
[   20.055317] Built 1 zonelists.  Total pages: 129763
[   20.055327] Kernel command line: root=UUID=02786427-a2d3-457f-85e6-633b9493b2be ro quiet splash
[   20.055798] Local APIC disabled by BIOS -- you can enable it with "lapic"
[   20.055820] mapped APIC to ffffd000 (0140a000)
[   20.055830] Enabling fast FPU save and restore... done.
[   20.055836] Enabling unmasked SIMD FPU exception support... done.
[   20.055859] Initializing CPU#0
[   20.055959] PID hash table entries: 2048 (order: 11, 8192 bytes)
[   20.057942] Console: colour VGA+ 80x25
[   20.059489] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[   20.061333] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[   20.126703] Memory: 507576k/523136k available (1992k kernel code, 14980k reserved, 900k data, 328k init, 0k highmem)
[   20.126731] virtual kernel memory layout:
[   20.126734]     fixmap  : 0xfff4e000 - 0xfffff000   ( 708 kB)
[   20.126737]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   20.126741]     vmalloc : 0xe0800000 - 0xff7fe000   ( 495 MB)
[   20.126744]     lowmem  : 0xc0000000 - 0xdfee0000   ( 510 MB)
[   20.126747]       .init : 0xc03d9000 - 0xc042b000   ( 328 kB)
[   20.126750]       .data : 0xc02f2374 - 0xc03d36d4   ( 900 kB)
[   20.126754]       .text : 0xc0100000 - 0xc02f2374   (1992 kB)
[   20.126762] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   20.203916] Calibrating delay using timer specific routine.. 1737.90 BogoMIPS (lpj=3475812)
[   20.204022] Security Framework v1.0.0 initialized
[   20.204049] SELinux:  Disabled at boot.
[   20.204091] Mount-cache hash table entries: 512
[   20.204437] CPU: After generic identify, caps: 0387f9ff 00000000 00000000 00000000 00000000 00000000 00000000
[   20.204466] CPU: L1 I cache: 16K, L1 D cache: 16K
[   20.204473] CPU: L2 cache: 256K
[   20.204481] CPU serial number disabled.
[   20.204488] CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
[   20.204514] Compat vDSO mapped to ffffe000.
[   20.204535] Remapping vsyscall page to ffffe000
[   20.204562] Checking 'hlt' instruction... OK.
[   20.220155] SMP alternatives: switching to UP code
[   20.220590] Freeing SMP alternatives: 11k freed
[   20.221084] Early unpacking initramfs... done
[   21.006701] ACPI: Core revision 20060707
[   21.008343] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[   21.011946] ACPI: setting ELCR to 0800 (from 0c08)
[   21.012460] CPU0: Intel Pentium III (Coppermine) stepping 0a
[   21.012474] SMP motherboard not detected.
[   21.012480] Local APIC not detected. Using dummy APIC emulation.
[   21.012610] Brought up 1 CPUs
[   21.013320] Booting paravirtualized kernel on bare hardware
[   21.013493] Time:  4:42:39  Date: 07/06/107
[   21.013596] NET: Registered protocol family 16
[   21.013902] EISA bus registered
[   21.013916] ACPI: bus type pci registered
[   21.015868] PCI: PCI BIOS revision 2.10 entry at 0xfdb91, last bus=1
[   21.015875] PCI: Using configuration type 1
[   21.015880] Setting up standard PCI resources
[   21.033211] ACPI: Interpreter enabled
[   21.033227] ACPI: Using PIC for interrupt routing
[   21.034242] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   21.034262] PCI: Probing PCI hardware (bus 00)
[   21.035710] Boot video device is 0000:00:01.0
[   21.035841] PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
[   21.035849] PCI quirk: region 0480-04bf claimed by ICH4 GPIO
[   21.036296] PCI: Transparent bridge - 0000:00:1e.0
[   21.036338] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   21.044279] ACPI: Power Resource [URP1] (off)
[   21.044429] ACPI: Power Resource [URP2] (off)
[   21.044576] ACPI: Power Resource [FDDP] (off)
[   21.044721] ACPI: Power Resource [LPTP] (off)
[   21.045658] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[   21.046419] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[   21.046943] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[   21.047456] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[   21.048054] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[   21.048322] Linux Plug and Play Support v0.97 (c) Adam Belay
[   21.048375] pnp: PnP ACPI init
[   21.055933] pnp: PnP ACPI: found 13 devices
[   21.055953] PnPBIOS: Disabled by ACPI PNP
[   21.056141] PCI: Using ACPI for IRQ routing
[   21.056149] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   21.058375] NET: Registered protocol family 8
[   21.058380] NET: Registered protocol family 20
[   21.059310] PCI: Ignore bogus resource 6 [0:0] of 0000:00:01.0
[   21.059331] PCI: Bridge: 0000:00:1e.0
[   21.059337]   IO window: b000-bfff
[   21.059349]   MEM window: efd00000-efdfffff
[   21.059357]   PREFETCH window: e7b00000-e7bfffff
[   21.059382] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[   21.059460] NET: Registered protocol family 2
[   21.095853] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[   21.096089] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[   21.096570] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[   21.096878] TCP: Hash tables configured (established 16384 bind 8192)
[   21.096886] TCP reno registered
[   21.108085] checking if image is initramfs... it is
[   22.565821] Freeing initrd memory: 6781k freed
[   22.567110] audit: initializing netlink socket (disabled)
[   22.567205] audit(1186375360.696:1): initialized
[   22.567611] VFS: Disk quotas dquot_6.5.1
[   22.567673] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   22.567842] io scheduler noop registered
[   22.567850] io scheduler anticipatory registered
[   22.567855] io scheduler deadline registered
[   22.567883] io scheduler cfq registered (default)
[   22.568537] isapnp: Scanning for PnP cards...
[   22.921441] isapnp: No Plug & Play device found
[   23.006384] Real Time Clock Driver v1.12ac
[   23.006524] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   23.006714] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   23.008883] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   23.009580] mice: PS/2 mouse device common for all mice
[   23.011186] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   23.011912] input: Macintosh mouse button emulation as /class/input/input0
[   23.012004] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   23.012015] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[   23.012424] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[   23.015687] serio: i8042 KBD port at 0x60,0x64 irq 1
[   23.015706] serio: i8042 AUX port at 0x60,0x64 irq 12
[   23.016122] EISA: Probing bus 0 at eisa.0
[   23.016165] EISA: Detected 0 cards.
[   23.046392] TCP cubic registered
[   23.046416] NET: Registered protocol family 1
[   23.046479] Using IPI No-Shortcut mode
[   23.046649] ACPI: (supports S0 S1 S3 S4 S5)
[   23.046759]   Magic number: 3:567:716
[   23.046993] Time: tsc clocksource has been installed.
[   23.048409] Freeing unused kernel memory: 328k freed
[   23.065750] input: AT Translated Set 2 keyboard as /class/input/input1
[   24.725529] Capability LSM initialized
[   24.840006] ACPI: CPU0 (power states: C1[C1] C2[C2])
[   26.526120] SCSI subsystem initialized
[   26.626378] libata version 2.20 loaded.
[   26.639889] ata_piix 0000:00:1f.1: version 2.10ac1
[   26.639961] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[   26.640116] ata1: PATA max UDMA/66 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14
[   26.640187] ata2: PATA max UDMA/66 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15
[   26.640232] scsi0 : ata_piix
[   26.774443] usbcore: registered new interface driver usbfs
[   26.774517] usbcore: registered new interface driver hub
[   26.774592] usbcore: registered new device driver usb
[   26.778740] USB Universal Host Controller Interface driver v3.0
[   26.802296] ata1.00: ata_hpa_resize 1: sectors = 80293248, hpa_sectors = 80293248
[   26.802309] ata1.00: ATA-7: Maxtor 6E040L0, NAR61EA0, max UDMA/133
[   26.802316] ata1.00: 80293248 sectors, multi 16: LBA 
[   26.810302] ata1.00: ata_hpa_resize 1: sectors = 80293248, hpa_sectors = 80293248
[   26.810316] ata1.00: configured for UDMA/66
[   26.810345] scsi1 : ata_piix
[   26.908970] Floppy drive(s): fd0 is 1.44M
[   27.001179] 8139too Fast Ethernet driver 0.9.28
[   27.049500] FDC 0 is a post-1991 82077
[   27.122181] ata2.00: ATAPI, max UDMA/33
[    7.140000] Time: acpi_pm clocksource has been installed.
[    7.224000] ata2.00: configured for UDMA/33
[    7.224000] scsi 0:0:0:0: Direct-Access     ATA      Maxtor 6E040L0   NAR6 PQ: 0 ANSI: 5
[    7.224000] scsi 1:0:0:0: CD-ROM                     54X CD-ROM       4.16 PQ: 0 ANSI: 5
[    7.224000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 3
[    7.224000] PCI: setting IRQ 3 as level-triggered
[    7.224000] ACPI: PCI Interrupt 0000:00:1f.2[D] -> Link [LNKD] -> GSI 3 (level, low) -> IRQ 3
[    7.224000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[    7.224000] uhci_hcd 0000:00:1f.2: UHCI Host Controller
[    7.228000] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
[    7.228000] uhci_hcd 0000:00:1f.2: irq 3, io base 0x0000d400
[    7.228000] usb usb1: configuration #1 chosen from 1 choice
[    7.228000] hub 1-0:1.0: USB hub found
[    7.228000] hub 1-0:1.0: 2 ports detected
[    7.268000] SCSI device sda: 80293248 512-byte hdwr sectors (41110 MB)
[    7.268000] sda: Write Protect is off
[    7.268000] sda: Mode Sense: 00 3a 00 00
[    7.268000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    7.268000] SCSI device sda: 80293248 512-byte hdwr sectors (41110 MB)
[    7.268000] sda: Write Protect is off
[    7.268000] sda: Mode Sense: 00 3a 00 00
[    7.268000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    7.268000]  sda: sda1 sda2 < sda5 >
[    7.312000] sd 0:0:0:0: Attached scsi disk sda
[    7.328000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    7.328000] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    7.332000] ACPI: PCI Interrupt 0000:01:02.0[A] -> Link [LNKD] -> GSI 3 (level, low) -> IRQ 3
[    7.332000] eth0: RealTek RTL8139 at 0xe081ef00, 00:10:b5:eb:c3:6f, IRQ 3
[    7.332000] eth0:  Identified 8139 chip type 'RTL-8139C'
[    7.344000] sr0: scsi3-mmc drive: 0x/52x cd/rw xa/form2 cdda tray
[    7.344000] Uniform CD-ROM driver Revision: 3.20
[    7.344000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    7.572000] usb 1-1: new low speed USB device using uhci_hcd and address 2
[    7.700000] Attempting manual resume
[    7.700000] swsusp: Resume From Partition 8:5
[    7.700000] PM: Checking swsusp image.
[    7.700000] PM: Resume from disk failed.
[    7.752000] usb 1-1: configuration #1 chosen from 1 choice
[    7.804000] EXT3-fs: INFO: recovery required on readonly filesystem.
[    7.804000] EXT3-fs: write access will be enabled during recovery.
[    7.996000] usb 1-2: new full speed USB device using uhci_hcd and address 3
[    8.156000] usb 1-2: configuration #1 chosen from 1 choice
[    8.164000] usbcore: registered new interface driver hiddev
[    8.180000] input: Microsoft Basic Optical Mouse as /class/input/input2
[    8.180000] input: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:1f.2-1
[    8.180000] usbcore: registered new interface driver usbhid
[    8.180000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[   11.688000] kjournald starting.  Commit interval 5 seconds
[   11.688000] EXT3-fs: sda1: orphan cleanup on readonly fs
[   11.688000] ext3_orphan_cleanup: deleting unreferenced inode 2867221
[   11.688000] EXT3-fs: sda1: 1 orphan inode deleted
[   11.688000] EXT3-fs: recovery complete.
[   11.704000] EXT3-fs: mounted filesystem with ordered data mode.
[   23.592000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[   24.916000] NET: Registered protocol family 17
[   27.724000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   27.784000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   27.792000] intel_rng: FWH not detected
[   27.832000] iTCO_vendor_support: vendor-support=0
[   27.836000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[   27.836000] iTCO_wdt: Found a ICH TCO device (Version=1, TCOBASE=0x0460)
[   27.836000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   28.072000] Linux agpgart interface v0.102 (c) Dave Jones
[   28.128000] agpgart: Detected an Intel i810 E Chipset.
[   28.136000] agpgart: detected 4MB dedicated video ram.
[   28.544000] agpgart: AGP aperture is 64M @ 0xe8000000
[   28.544000] i810_smbus 0000:00:01.0: i810/i815 i2c device found.
[   29.016000] input: PC Speaker as /class/input/input3
[   29.748000] parport: PnPBIOS parport detected.
[   29.752000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[   30.516000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[   30.516000] PCI: setting IRQ 11 as level-triggered
[   30.516000] ACPI: PCI Interrupt 0000:00:1f.5[b] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[   30.516000] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[   30.816000] Linux video capture interface: v2.00
[   30.832000] intel8x0_measure_ac97_clock: measured 54333 usecs
[   30.832000] intel8x0: clocking to 48000
[   31.072000] ubuntu/media/gspcav1/gspca_core.c: USB SPCA5XX camera found. SONIX JPEG (sn9c1xx) 
[   31.116000] usbcore: registered new interface driver gspca
[   31.116000] ubuntu/media/gspcav1/gspca_core.c: gspca driver 01.00.12 registered
[   31.480000] fuse init (API version 7.8)
[   31.528000] lp0: using parport0 (interrupt-driven).
[   31.632000] Adding 1502036k swap on /dev/disk/by-uuid/050e1099-46fa-48c3-9872-e6bb8db2e773.  Priority:-1 extents:1 across:1502036k
[   31.804000] EXT3 FS on sda1, internal journal
[   32.056000] NET: Registered protocol family 10
[   32.056000] lo: Disabled Privacy Extensions
[   39.232000] input: Power Button (FF) as /class/input/input4
[   39.232000] ACPI: Power Button (FF) [PWRF]
[   39.264000] input: Power Button (CM) as /class/input/input5
[   39.264000] ACPI: Power Button (CM) [PWRB]
[   39.448000] No dock devices found.
[   39.520000] ibm_acpi: ec object not found
[   39.984000] Using specific hotkey driver
[   40.028000] pcc_acpi: loading...
[   42.236000] eth0: no IPv6 routers present
[   47.752000] ppdev: user-space parallel port driver
[   49.056000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[   49.056000] apm: overridden by ACPI.
[   50.036000] Bluetooth: Core ver 2.11
[   50.036000] NET: Registered protocol family 31
[   50.036000] Bluetooth: HCI device and connection manager initialized
[   50.036000] Bluetooth: HCI socket layer initialized
[   50.128000] Bluetooth: L2CAP ver 2.8
[   50.128000] Bluetooth: L2CAP socket layer initialized
[   50.136000] Bluetooth: RFCOMM socket layer initialized
[   50.136000] Bluetooth: RFCOMM TTY layer initialized
[   50.136000] Bluetooth: RFCOMM ver 1.8
[   65.868000] eth0: no IPv6 routers present

Si une personne peu répondre à cette requête, merci d'avance...

lut!n

Re : HELP! AUCUN PERIFERIQUE NE FONCTIONNE, lecteur cdrom, disquette, ect..

Doublon de http://forum.ubuntu-fr.org/viewtopic.php?pid=1086781.
Sujet fermé. Pour la discussion, ca se passe sur le lien juste au dessus

---

Règles du forum
Depots e17