Pages : 1
#1 Le 09/10/2007, à 19:33
- GamerP7
Problème : Résolution + Wifi
Bonjour à tous
J'ai des problèmes pour installer Ubuntu sur mon PC.
1. Le 1er est la résolution de l'écran. Même si au départ de l'installation je choisis les résolutions 1024x768 ou supérieures, je suis toujours en 800x600. Lorsque je veux installer Ubuntu via l'icone Installer, la résolution est tellement petite que je ne peux pas voir le bas de la fenêtre pour faire les divers réglages que demandent l'installation
J'ai essayé de redimensionner, déplacer et tout ce qu'on veut la fenêtre mais rien n'y fait...
Je possède un écran Samsung 19'' Wide résolution max. 1440x900. Que dois je faire?
2. Aussi, je n'arrive pas à régler le Wifi en WPA. Lorsque je clique sur l'icone Réseau dans la barre système, il me propose les réseaux sans fil, je choisis donc le mien, mais il ne me propose pas le cryptage WPA ! Seulement "Clé WEP (hexadécimal)" et "Clé WEP (ASCII)" sont proposés et ne correspondent pas à ma config... Comment faire?
Merci de votre aide !
#2 Le 09/10/2007, à 22:04
- pmdzlineur
Re : Problème : Résolution + Wifi
pour la première chose je ne peux rien affimer
mais quand tu édites
sudo gedit /etc/X11/xorg.conf
tu as à peu près ça
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
Fontpath "/usr/share/X11/fonts/misc"
Fontpath "/usr/share/X11/fonts/cyrillic"
Fontpath "/usr/share/X11/fonts/100dpi/:unscaled"
Fontpath "/usr/share/X11/fonts/75dpi/:unscaled"
Fontpath "/usr/share/X11/fonts/Type1"
Fontpath "/usr/share/X11/fonts/100dpi"
Fontpath "/usr/share/X11/fonts/75dpi"
Fontpath "/usr/share/fonts/X11/misc"
# path to defoma fonts
Fontpath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Synaptics TouchPad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "SHMConfig" "on"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom"# Change to
Option "Type" "stylus"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
# /dev/input/event
# for USB
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom"# Change to
Option "Type" "eraser"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
# /dev/input/event
# for USB
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom"# Change to
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
# /dev/input/event
# for USB
EndSection
Section "Device"
Identifier "NVIDIA Corporation NVIDIA Default Card"
Driver "nvidia"
Busid "PCI:1:0:0"
Option "AddARGBVisuals" "True"
Option "AddARGBGLXVisuals" "True"
Option "NoLogo" "True"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
Horizsync 28-51
Vertrefresh 43-60
EndSection
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NVIDIA Default Card"
Monitor "Generic Monitor"
Defaultdepth 24
SubSection "Display"
Depth 1
Modes "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
screen "Default Screen"
Inputdevice "Generic Keyboard"
Inputdevice "Configured Mouse"
InputDevice "Synaptics TouchPad"
Inputdevice "stylus" "SendCoreEvents"
Inputdevice "cursor" "SendCoreEvents"
Inputdevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSection
dans section "screen" essai ed'ajouter
"1440x900"
ceci dit ça dépend de ton driver.
Merci de poster le résultat de
lspci
qu'on connaisse ta carte graphique
Dernière modification par pmdzlineur (Le 09/10/2007, à 22:05)
je ne suis pas informaticien, juste utilisateur un peu averti ;-)
http://www.freemedforms.com/fr/start
http://code.google.com/p/rapidcomptamed/
médecin volant, mais pas en même temps ;-)
Hors ligne
#3 Le 10/10/2007, à 18:03
- GamerP7
Re : Problème : Résolution + Wifi
Merci de ton aide pmdzlineur.
J'ai essayé ce que tu m'as dit mais cela ne marche pas
J'ai tapé lspci et voilà mon carte graphique :
"VGA compatible controller : nVidia corporation C51G [GeForce 6100] (rev a2)"
J'ai essayé d'installer la CG comme indiqué dans la doc 'nvidia' mais ca ne marche pas...
Sinon, pour le WPA, j'ai essayé en suivant la doc 'wpa' d'installer avec WPA-Supplicant mais rien n'y fait... C'est bizare qu'il ne propose que le WEP quand même!
#4 Le 10/10/2007, à 19:24
- GamerP7
Re : Problème : Résolution + Wifi
Est ce que le problème pourrait venir de la version 64bits que j'essai d'installer au lieu de la 32?
#5 Le 10/10/2007, à 19:50
- pmdzlineur
Re : Problème : Résolution + Wifi
pour le wpa, essaie par network-manager.
pour la nvidia, fais une recherche dans la doc, il y a d'autres tutos
sinon , chez nvidia, il y a ça
http://www.nvidia.fr/object/linux_supported_fr.html
quant à l'histoire du 64 bits, je n'en sais rien.
je ne suis pas informaticien, juste utilisateur un peu averti ;-)
http://www.freemedforms.com/fr/start
http://code.google.com/p/rapidcomptamed/
médecin volant, mais pas en même temps ;-)
Hors ligne
Pages : 1