#1 Le 13/09/2007, à 00:16
- gagarine
samba: log -> "Unable to open printcap file /etc/printcap for read!"
Hello,
J'ai un problème avec mon samba, bon tout fonctionne sauf que j'ai dans les log une erreur systématique:
[2007/09/12 16:47:44, 0] printing/pcap.c:pcap_cache_reload(159)
Unable to open printcap file /etc/printcap for read!
[2007/09/12 17:00:57, 0] printing/pcap.c:pcap_cache_reload(159)
Unable to open printcap file /etc/printcap for read!
Pourtant dans mon samba.conf j'ai mis la directive load printers = no. Je n'utilise absolument pas le partage d'imprimante et d'ailleurs CUPS ne tourne pas...
Donc comment faire pour empêcher samba d'aller chercher dans printcap?
EDIT: Je précise que je suis sur ubuntu serveur.
Merci
Dernière modification par gagarine (Le 13/09/2007, à 00:17)
http://www.wiki.neverlandlab.net/
Hors ligne
#2 Le 15/09/2007, à 14:43
- gagarine
Re : samba: log -> "Unable to open printcap file /etc/printcap for read!"
Bon je refais monter le post pour le week-end
personne n'as une idée?
http://www.wiki.neverlandlab.net/
Hors ligne
#3 Le 15/09/2007, à 14:46
- figaro
Re : samba: log -> "Unable to open printcap file /etc/printcap for read!"
Commentes toutes les lignes du smb.conf qui concerne l'impression y compris celles entre []
Le blog de figaro (astuces diverses et tutos Samba pour débutants)
Le blog de cep (astuces Linux avancées)
Debian Lenny 6.0.1, Ubuntu 10.04.2, Ubuntu Remix 9.10, Ubuntu Netbook 10.04
Hors ligne
#4 Le 12/10/2007, à 10:40
- gagarine
Re : samba: log -> "Unable to open printcap file /etc/printcap for read!"
oups désolé de pas avoir répondu, j'ai oublié de m'abonner au sujet .
Je vais tester ça alors, je reviens vous dire si ça fonctionne.
Merci
http://www.wiki.neverlandlab.net/
Hors ligne
#5 Le 29/10/2007, à 19:47
- gagarine
Re : samba: log -> "Unable to open printcap file /etc/printcap for read!"
Hello,
J'ai toujours le même problème...
Voilà ma config, j'ai tout enlevé même load printers = no et j'ai toujours le même message dans les logs... j'hésite à installer cups lol.
#======================= Global Settings =======================
[global]
## Browsing/Identification ###
# Change this to the workgroup/NT-domain name your Samba server will part of
workgroup = xxxx
##### mes options ######
netbios name = serveur-xxx
smb ports = 139
guest account = nobody
hosts deny = ALL
hosts allow = 192.168.1. EXCEPT 192.168.1.10
security = share
# load printers = no
# server string is the equivalent of the NT Description field
server string = %h server (Samba, Ubuntu)
# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
; wins support = no
# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z
# This will prevent nmbd to search for NetBIOS names through DNS.
dns proxy = no
# What naming service and in what order should we use to resolve host names
# to IP addresses
; name resolve order = lmhosts host wins bcast
#### Networking ####
# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
; interfaces = 127.0.0.0/8 eth0
# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself. However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
; bind interfaces only = true
#### Debugging/Accounting ####
# This tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/log.%m
# Put a capping on the size of the log files (in Kb).
max log size = 1000
# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
syslog = 0
# Do something sensible when Samba crashes: mail the admin a backtrace
panic action = /usr/share/samba/panic-action %d
####### Authentication #######
# "security = user" is always a good idea. This will require a Unix account
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
# in the samba-doc package for details.
; security = user
# You may wish to use password encryption. See the section on
# 'encrypt passwords' in the smb.conf(5) manpage before enabling.
encrypt passwords = true
# If you are using encrypted passwords, Samba will need to know what
# password database type you are using.
passdb backend = tdbsam
obey pam restrictions = yes
; guest account = nobody
invalid users = root
# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
; unix password sync = no
# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
passwd program = /usr/bin/passwd %u
passwd chat = *Enter\snew\sUNIX\spassword:* %n\n *Retype\snew\sUNIX\spassword:* %n\n *password\supdated\ssuccessfully* .
# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
; pam password change = no
########## Domains ###########
# Is this machine able to authenticate users. Both PDC and BDC
# must have this setting enabled. If you are the BDC you must
# change the 'domain master' setting to no
#
; domain logons = yes
#
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of the user's profile directory
# from the client point of view)
# The following required a [profiles] share to be setup on the
# samba server (see below)
; logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
; logon path = \\%N\%U\profile
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
; logon drive = H:
; logon home = \\%N\%U
# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
; logon script = logon.cmd
# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe. The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u
########## Printing ##########
#remove... see the smb.conf.old
############ Misc ############
# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
; include = /home/samba/etc/smb.conf.%m
# Most people will find that this option gives better performance.
# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
# for details
# You may want to add the following on a Linux system:
# SO_RCVBUF=8192 SO_SNDBUF=8192
socket options = TCP_NODELAY
# The following parameter is useful only if you have the linpopup package
# installed. The samba maintainer and the linpopup maintainer are
# working to ease installation and configuration of linpopup and samba.
; message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &
# Domain Master specifies Samba to be the Domain Master Browser. If this
# machine will be configured as a BDC (a secondary logon server), you
# must set this to 'no'; otherwise, the default behavior is recommended.
; domain master = auto
# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
; idmap uid = 10000-20000
; idmap gid = 10000-20000
; template shell = /bin/bash
#======================= Share Definitions =======================
#partage accesible à tous en lecture/ecriture
[PARTAGE]
path = /home/samba/PARTAGE
browseable = yes
writeable = yes
guest ok = yes
force user = nobody
[HIST-PARTAGE]
path = /mnt/sdb1/backup-rsnapshot/HIST-PARTAGE
browseable = yes
writeable = no
guest ok = yes
force user = nobody
#partage protege accesible uniquement par les utilisateurs précisé
[PROTEGE]
path = /home/samba/PROTEGE
writeable = yes
browseable = yes
; guest ok = no
; create mask = 0644
valid users = xxxx
[HIST-PROTEGE]
path = /mnt/sdb1/backup-rsnapshot/HIST-PROTEGE
writeable = no
browseable = yes
valid users = xxxx
# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares. This will share each
# user's home directory as \\server\username
;[homes]
; comment = Home Directories
; browseable = no
# By default, \\server\username shares can be connected to by anyone
# with access to the samba server. Un-comment the following parameter
# to make sure that only "username" can connect to \\server\username
; valid users = %S
# By default, the home directories are exported read-only. Change next
# parameter to 'yes' if you want to be able to write to them.
; writable = no
# File creation mask is set to 0600 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0664.
; create mask = 0600
# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
; directory mask = 0700
# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
; comment = Network Logon Service
; path = /home/samba/netlogon
; guest ok = yes
; writable = no
; share modes = no
# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
; comment = Users profiles
; path = /home/samba/profiles
; guest ok = no
; browseable = no
; create mask = 0600
; directory mask = 0700
http://www.wiki.neverlandlab.net/
Hors ligne