#1 Le 26/10/2007, à 09:12
- gelinp
Gutsy: Acceleration 3D avec un chipset Intel 945GM/GMS/940GML...
Bonjour,
j'ai lu le document http://doc.ubuntu-fr.org/acceleration_graphique qui indique 'oui' dans la case à la croisée de Gutsy et chipset Intel 945GM/GMS/940GML... Si je dois comprendre que c'est supporté par défaut alors je peux dire que ce n'est aps mon cas, sur mon PC l'accélération n'est pas activée. Faut-il changer de driver? Ajouter un autre driver? Modifier le paramétrage?
Je cherche un document qui explique comment faire pour mon chipset.
Merci pour votre aide.
Patrick
Ubuntu 14.04, interface KDE
Hors ligne
#2 Le 26/10/2007, à 09:19
- ft
Re : Gutsy: Acceleration 3D avec un chipset Intel 945GM/GMS/940GML...
étrange : peux-tu nous sortir la commande de direct-rendering ?
(je suis sous gma 945 et tout est ok.)
Ubuntu 24.04
Hors ligne
#3 Le 26/10/2007, à 09:39
- gelinp
Re : Gutsy: Acceleration 3D avec un chipset Intel 945GM/GMS/940GML...
Voici l'état de l'accélaration 3D:
gelinp@gelinux:~$ glxinfo | grep "direct rendering"
direct rendering: No (If you want to find out why, try setting LIBGL_DEBUG=verbose)
gelinp@gelinux:~$ glxgears
3574 frames in 5.0 seconds = 709.045 FPS
3616 frames in 5.1 seconds = 707.298 FPS
3501 frames in 5.1 seconds = 688.644 FPS
X connection to :0.0 broken (explicit kill or server shutdown).
gelinp@gelinux:~$
Voici mon chipset:
gelinp@gelinux:~$ lspci | grep "VGA"
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
Voici mon xorg.conf, j'ai l'impresion qu'il est paramétré pour une carte graphique générique de type VESA... Notez que j'utilise le package 915resolution alors qu'il semble qu'il ne soit plus nécessaire avec le driver intel. Au fait ils sont où les drivers Intel? Est ce que c'est le package 'xserver-xorg-video-intel'? J'ai aussi installé le package 'libgl1-mesa-dri', il me semble que c'est OpenGL?
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "Carte vidéo générique"
Driver "vesa"
BusID "PCI:0:2:0"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
HorizSync 28-96
VertRefresh 43-60
EndSection
Section "Screen"
Dernière modification par gelinp (Le 26/10/2007, à 09:54)
Ubuntu 14.04, interface KDE
Hors ligne
#4 Le 26/10/2007, à 10:30
- ft
Re : Gutsy: Acceleration 3D avec un chipset Intel 945GM/GMS/940GML...
c'est clair, tu devrais mettre "intel" à la place de "vesa", et ça devrait marcher.
Reste à savoir pourquoi ce n'est pas mis par défaut.
Au passage, enlève 915resolution, il ne sert plus à rien.
Ubuntu 24.04
Hors ligne
#5 Le 26/10/2007, à 13:58
- gelinp
Re : Gutsy: Acceleration 3D avec un chipset Intel 945GM/GMS/940GML...
J'ai réussi à installer l'accélération 3D en suivant ce tutoriel sur l'instalation d'AIGLX http://doc.fedora-fr.org/wiki/Configuration_d_'_AIGLX que j'ai trouvé sur Google. J'ai aussi suivit certain conseils et supprimé le package 915resolution. Mais là rien ne va plus, la resolution était tombée à 1024x768, j'ai dû le réinstaller pour retrouver une résolution correcte! Remarquez que GoogleEarth fonctionne maintenant bien mais que le jeux Balazar est toujour saccadé et injouable...
Voici mon nouveau xorg.conf:
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "GLcore" #pour les GPU Intel intégrés
Load "dbe"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "Carte vidéo 945"
Driver "i810"
Option "XAANoOffscreenPixmaps"
BusID "PCI:0:2:0"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
HorizSync 28-96
VertRefresh 43-60
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Carte vidéo 945"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1920x1440" "1856x1392" "1680x1050" "1440x900" "1280x1024" "1280x854" "1280x768" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1920x1440" "1856x1392" "1680x1050" "1440x900" "1280x1024" "1280x854" "1280x768" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1920x1440" "1856x1392" "1680x1050" "1440x900" "1280x1024" "1280x854" "1280x768" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1920x1440" "1856x1392" "1680x1050" "1440x900" "1280x1024" "1280x854" "1280x768" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1920x1440" "1856x1392" "1680x1050" "1440x900" "1280x1024" "1280x854" "1280x768" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1920x1440" "1856x1392" "1680x1050" "1440x900" "1280x1024" "1280x854" "1280x768" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
InputDevice "Synaptics Touchpad"
Option "AIGLX" "true"
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection
Merci pour votre aide!
Patrick
Dernière modification par gelinp (Le 26/10/2007, à 14:10)
Ubuntu 14.04, interface KDE
Hors ligne
#6 Le 26/10/2007, à 15:06
- ft
Re : Gutsy: Acceleration 3D avec un chipset Intel 945GM/GMS/940GML...
alors essaie de bien mettre "intel", pas "i810".
Sinon tu peux essayer le dpkg-reconfigure qui est indiqué au début de ton xorg.conf.
Ubuntu 24.04
Hors ligne
#7 Le 27/10/2007, à 08:56
- gelinp
Re : Gutsy: Acceleration 3D avec un chipset Intel 945GM/GMS/940GML...
Voila ce que j'obtiens avec dpkg-reconfigure:
gelinp@gelinux:~$ sudo dpkg-reconfigure -phigh xserver-xorg
xserver-xorg postinst warning: overwriting possibly-customised configuration
file; backup in /etc/X11/xorg.conf.20071027085220
Mais cela a eu un effet sur mon fichier xorg.conf qui utilise effectivement Intel:
# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizEdgeScroll" "0"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller"
Driver "intel"
BusID "PCI:0:2:0"
EndSection
Section "Monitor"
Identifier "Écran générique"
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller"
Monitor "Écran générique"
DefaultDepth 24
SubSection "Display"
Modes "1440x900"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
# Uncomment if you have a wacom tablet
# InputDevice "stylus" "SendCoreEvents"
# InputDevice "cursor" "SendCoreEvents"
# InputDevice "eraser" "SendCoreEvents"
InputDevice "Synaptics Touchpad"
EndSection
A noter que j'ai pu enlever 915resolution, je n'en ai effectivement plus besoin.
J'ai un problème avec la boite de dialogue de configuration du bureau 3D qui ne s'ouvre pas... Lorsque je lance la commande à la main dans un terminal "gnome-compiz-preferences" elle ne s'ouvre pas d'avantage et je n'ai aucun message...
Patrick
Dernière modification par gelinp (Le 27/10/2007, à 09:11)
Ubuntu 14.04, interface KDE
Hors ligne
#8 Le 27/10/2007, à 09:32
- ft
Re : Gutsy: Acceleration 3D avec un chipset Intel 945GM/GMS/940GML...
là je ne peux t'aider : je suis sous KDE et n'utilise pas compiz.
Ubuntu 24.04
Hors ligne
#9 Le 07/11/2007, à 10:10
- amar
Re : Gutsy: Acceleration 3D avec un chipset Intel 945GM/GMS/940GML...
salut (salam alikom)*
bon moi j avai des problèmes mais..
voila la solution (gutsy);
système---->administration------->écrans et affichage : ds carte graphique
choisir intel ; puis valider; redémarrer
systeme---->administration------->ecrans et affichage : ds ecran
choisir l'écran (votre ecran) si la marque de votre écran n'existe pas alors c generique
Hors ligne
#10 Le 08/11/2007, à 21:59
- gelinp
Re : Gutsy: Acceleration 3D avec un chipset Intel 945GM/GMS/940GML...
oui c'est bizard. En fait je sais que mon chipset est:
"Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller"
et dans etc/x11/xorg.conf j'ai la section device suivante:
Section "Device"
Identifier "Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller"
Boardname "Intel 945"
Busid "PCI:0:2:0"
Driver "intel"
Screen 0
Vendorname "Intel"
EndSection
Dans systeme--->administration--->ecran et affichage j'ai le pilote suivant de selectionné:
Carte graphique (Intel 945)
Pilote: Intel - experimental modesetting driver for Intel Integrated graphics chipsets
Le terme experimental ne me plait guère aussi j'ai fait un test en choisissant un autre, fabricant 'Intel' modèle '945'. Mais là rien ne va plus, je perds mon interface graphique. J'ai été obligé d'intervenir dans mon xorg.conf pour remettre les choses en ordre...
Patrick
Dernière modification par gelinp (Le 09/11/2007, à 09:31)
Ubuntu 14.04, interface KDE
Hors ligne
#11 Le 08/11/2007, à 22:08
- amar
Re : Gutsy: Acceleration 3D avec un chipset Intel 945GM/GMS/940GML...
quelle carte mere a tu ?
Hors ligne
#12 Le 09/11/2007, à 09:43
- gelinp
Re : Gutsy: Acceleration 3D avec un chipset Intel 945GM/GMS/940GML...
Mon PC est un portable DELL inspiron 640M Core 2 Duo Processor T5500. Pour le nom de la carte mère j'ai utilisé la commande dmidecode:
#dmidecode
(...)
Base Board Information
Manufacturer: Dell Inc.
Product Name: 0MG532
Version:
Serial Number: .4NSPS2J.CN701666B701D1.
(...)
Patrick
Dernière modification par gelinp (Le 09/11/2007, à 09:56)
Ubuntu 14.04, interface KDE
Hors ligne
#14 Le 11/11/2007, à 17:00
- gelinp
Re : Gutsy: Acceleration 3D avec un chipset Intel 945GM/GMS/940GML...
L'anglais c'est pas un problème, le problème c'est qu'il faut compiler soit même son driver et la procédure peut être compliquée... En fait sur le site ils disent qu'il est préférable de télécharger les binaires fournis avec sa distribution, ce que j'ai fait, mais ça à l'air d'être expérimentale... Boaf, ca fonctionne déjà pas mal, je vais attendre la prochaine version ou même une mise à jour indépendante du driver.
Merci pour votre aide!
Patrick
Ubuntu 14.04, interface KDE
Hors ligne
#15 Le 11/11/2007, à 19:42
- amar
Re : Gutsy: Acceleration 3D avec un chipset Intel 945GM/GMS/940GML...
salut
va voir ça http://linux.dell.com/ peut etre utile
et bonne chance
Hors ligne