Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 31/03/2013, à 14:17

david69

demarrage en 25 sec

hello,

le lancement de lubuntu se fait en moyenne en 25 sec.
je lis en faisant la commande dmesg | more:

    1.824482] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[    1.824488] EXT4-fs (sda1): write access will be enabled during recovery
[    3.697801] EXT4-fs (sda1): recovery complete
[    3.707403] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   19.967977] Adding 1038332k swap on /dev/sda5.  Priority:-1 extents:1 across:1038332k 
[   19.979550] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   20.039483] udevd[333]: starting version 175

pourquoi y a t il l'ajout de memoire necessitant 16 sec?
est il possible d'eviter cette manip de maniere definitive?

Hors ligne

#2 Le 31/03/2013, à 15:27

Compte supprimé

Re : demarrage en 25 sec

Bonjour,
tu peux toujours éditer /etc/fstab et ajouter un '#' à la ligne avec swap :

gksudo gedit /etc/fstab

puis refaire ton dmesg mais je ne pense pas que ce soit la swap qui prenne autant de temps…

#3 Le 31/03/2013, à 16:32

david69

Re : demarrage en 25 sec

la commande

gksudo gedit /etc/fstab

ne me renvoie rien.

je suis alle voir avec pcmanfm ce qui se trouvait dans fstab.d, et il n'y a rien meme en mode caché.

Hors ligne

#4 Le 31/03/2013, à 16:38

f.x0

Re : demarrage en 25 sec

Bonjour david69,

essaies

gksudo leafpad /etc/fstab

ajoutes un # devant la ligne concernant le swap
Enregistres le fichier
Quittes Leafpad
Redémarres le PC

puis refais ton dmesg mais moi non plus je ne pense pas que ce soit la swap qui prenne autant de temps.
Je pense que c'est le montage du système qui prends ~16s.
Le montage du swap se fait à mon avis en un 100ème de seconde


SOPI

Hors ligne

#5 Le 31/03/2013, à 19:44

tiramiseb

Re : demarrage en 25 sec

Salut,

Je pense également que le "trou" de quelques secondes avant le montage de la swap correspond à d'autres opérations.
Après, pourquoi n'y a-t-il pas de détails dans le dmesg je ne sais pas, c'est dommage... Mais la swap est rapide à monter (tu peux le vérifier en faisant "sudo swapoff -a" puis "sudo swapon -a").

Hors ligne

#6 Le 31/03/2013, à 23:00

david69

Re : demarrage en 25 sec

salut,

la commande de f.x0 m'a bien renvoye qlq chose. Le swap est deja commente par #. ce n'est donc pas le swap.

UUID=112df95a-57ae-423c-8e80-7a6c8d679a08 /               ext4    errors=remount-ro 0       1
# swap was on /dev/sda5 during installation
UUID=f49d0bfa-8cf1-4ecd-9f3b-466be445006e none            swap    sw              0       0

reste un mystere.

Hors ligne

#7 Le 31/03/2013, à 23:04

Compte supprimé

Re : demarrage en 25 sec

Non, le swap n'est pas commenté. C'est le commentaire qui est commenté mais tu as bien :

UUID=f49d0bfa-8cf1-4ecd-9f3b-466be445006e none            swap    sw              0       0

et non

#UUID=f49d0bfa-8cf1-4ecd-9f3b-466be445006e none            swap    sw              0       

#8 Le 01/04/2013, à 14:08

david69

Re : demarrage en 25 sec

ok merci Ldvc, je n'avais pas compris l'arrangement des lignes.

apres la mise en commentaire du swapt, voila ce que me donne dmesg

[    1.727795] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input4
[    1.728035] hid-generic 0003:046D:C016.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00
:1d.0-1/input0
[    1.749152] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[    1.749158] EXT4-fs (sda1): write access will be enabled during recovery
[    3.245766] EXT4-fs (sda1): recovery complete
[    3.249885] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   19.213441] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   19.370343] udevd[340]: starting version 175
[   19.413263] lp: driver loaded but no devices found
[   19.474060] ACPI: Video Device [C05A] (multi-head: yes  rom: no  post: no)

apres 3.2 sec, il faut 16 sec supplementaires pour que l'action relative a IPv6 s'affiche. dans ma naivete, j'attribuerais la lenteur a IPv6. je crains que ce ne soit pas aussi simple.

Hors ligne

#9 Le 01/04/2013, à 14:10

Compte supprimé

Re : demarrage en 25 sec

[   19.967977] Adding 1038332k swap on /dev/sda5.  Priority:-1 extents:1 across:1038332k 
#ou
[   19.213441] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
#c'est pareil...

#10 Le 01/04/2013, à 14:19

david69

Re : demarrage en 25 sec

ouai il y a qlq chose en tache de fond qui consomme le chrono.

Hors ligne

#11 Le 01/04/2013, à 14:59

f.x0

Re : demarrage en 25 sec

Tel que je comprend les messages (et je ne pense pas me tromper)

[    3.697801] EXT4-fs (sda1): recovery complete
[    3.707403] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   19.967977] Adding 1038332k swap on /dev/sda5.  Priority:-1 extents:1 across:1038332k 
[    3.245766] EXT4-fs (sda1): recovery complete
[    3.249885] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   19.213441] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

le passage de 3 à 19 secondes vient de la ligne où est indiqué

EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)

c'est à dire que le temps indiqué au début d'une ligne
[    3.249885]  par exemple indique le temps de démarrage de la commande après le boot
et donc le temps indiqué au début de la ligne suivante indique donc le temps de démarrage de la commande suivante.

Soit 19 - 3 = 16 secondes pour mounted filesystem

Dernière modification par f.x0 (Le 01/04/2013, à 15:12)


SOPI

Hors ligne

#12 Le 01/04/2013, à 15:08

david69

Re : demarrage en 25 sec

ok cela fait sens. je viens de chercher les mots cles montage filesystem. je me penche sur ce lien

http://forum.ubuntu-fr.org/viewtopic.php?id=392555&p=1

Hors ligne

#13 Le 01/04/2013, à 15:13

tiramiseb

Re : demarrage en 25 sec

16 secondes pour monter un volume ? J'en doute.

Surtout que le message ne dit pas "mounting filesystem", il dit "mounted filesystem" : il dit que le montage a été effectué.

Je ne sais pas d'où viennent ces 16 secondes. Mais ce qui est sûr c'est que j'ai toujours remarqué (approximativement) ce délai, sur n'importe quel système. Ça doit être explicable, et s'il y avait moyen de le réduire ça aurait déjà été fait par ceux qui savent © smile

Hors ligne

#14 Le 08/04/2013, à 11:57

david69

Re : demarrage en 25 sec

J'ai memoire d'avoir vu mon demarrage bien plus rapide que ce j'observe aujourd'hui, de l'ordre des 10 sec.
c'est pour cela que je tentais cette question sur le forum.

Hors ligne

#15 Le 27/04/2013, à 11:51

sissou

Re : demarrage en 25 sec

Bonjour,
Je m'interroge également en ce moment sur ce "trou" de 22 secondes pour moi à chaque démarrage :

...
[    1.890472] input: Logitech Unifying Device. Wireless PID:1025 as /devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1:1.2/0003:046D:C52B.0003/input/input2
[    1.890725] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1025] on usb-0000:00:12.0-1:1
[    2.136116] usb 4-4: new low-speed USB device number 3 using ohci_hcd
[    2.220172] firewire_core: created device fw0: GUID 00023c0151108165, S400
[   26.268185] Adding 8752124k swap on /dev/sda1.  Priority:-1 extents:1 across:8752124k 
[   26.278928] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   26.294271] udevd[341]: starting version 175
...

J'utilise la version 12.04, et je me demande si les noyaux des versions + récentes ont ce même comportement ?

Sur ce thread il est évoqué ureadahead comme cause de ces délais sans commentaires : http://ubuntuforums.org/showthread.php?t=1680783

Hors ligne

#16 Le 27/04/2013, à 11:59

tiramiseb

Re : demarrage en 25 sec

Salut,

Une autre discussion dans ce forum a déjà évoqué ce "trou".
Ce "trou" est partout, chez tout le monde.

Et je n'ai pas encore réussi à trouver précisément une source qui l'explique...

Hors ligne

#17 Le 27/04/2013, à 19:27

sissou

Re : demarrage en 25 sec

Oui effectivement le seul moyen de compresser ce temps est d'utiliser un disque dur + performant, ou un SSD carrément...

Hors ligne

#18 Le 28/04/2013, à 06:03

Compte supprimé

Re : demarrage en 25 sec

ludovic@Super-Ordinateur:~$ dmesg -r
<6>[    0.000000] Initializing cgroup subsys cpuset
<6>[    0.000000] Initializing cgroup subsys cpu
<5>[    0.000000] Linux version 3.2.0-40-lowlatency (buildd@allspice) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #43-Ubuntu SMP PREEMPT Wed Apr 3 18:26:22 UTC 2013 (Ubuntu 3.2.0-40.43-lowlatency 3.2.40)
<6>[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-40-lowlatency root=UUID=32b73871-8597-4b14-8b63-45aa173dfbc3 ro quiet splash vt.handoff=7
<6>[    0.000000] KERNEL supported cpus:
<6>[    0.000000]   Intel GenuineIntel
<6>[    0.000000]   AMD AuthenticAMD
<6>[    0.000000]   Centaur CentaurHauls
<6>[    0.000000] BIOS-provided physical RAM map:
<6>[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
<6>[    0.000000]  BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
<6>[    0.000000]  BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved)
<6>[    0.000000]  BIOS-e820: 0000000000100000 - 00000000afde0000 (usable)
<6>[    0.000000]  BIOS-e820: 00000000afde0000 - 00000000afdea000 (ACPI data)
<6>[    0.000000]  BIOS-e820: 00000000afdea000 - 00000000afdeb000 (ACPI NVS)
<6>[    0.000000]  BIOS-e820: 00000000afdeb000 - 00000000b0000000 (reserved)
<6>[    0.000000]  BIOS-e820: 00000000b4000000 - 00000000b8000000 (reserved)
<6>[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
<6>[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
<6>[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
<6>[    0.000000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
<6>[    0.000000]  BIOS-e820: 0000000100000000 - 0000000250000000 (usable)
<6>[    0.000000] NX (Execute Disable) protection: active
<6>[    0.000000] SMBIOS 2.4 present.
<7>[    0.000000] DMI: Tyan Computer Corporation  MCP55 /S2915 , BIOS 4.01d.2915 05/25/2010
<7>[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
<7>[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
<6>[    0.000000] No AGP bridge found
<6>[    0.000000] last_pfn = 0x250000 max_arch_pfn = 0x400000000
<7>[    0.000000] MTRR default type: uncachable
<7>[    0.000000] MTRR fixed ranges enabled:
<7>[    0.000000]   00000-9FFFF write-back
<7>[    0.000000]   A0000-BFFFF uncachable
<7>[    0.000000]   C0000-D3FFF write-protect
<7>[    0.000000]   D4000-E3FFF uncachable
<7>[    0.000000]   E4000-FFFFF write-protect
<7>[    0.000000] MTRR variable ranges enabled:
<7>[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
<7>[    0.000000]   1 base 000080000000 mask FFFFE0000000 write-back
<7>[    0.000000]   2 base 0000A0000000 mask FFFFF0000000 write-back
<7>[    0.000000]   3 disabled
<7>[    0.000000]   4 disabled
<7>[    0.000000]   5 disabled
<7>[    0.000000]   6 disabled
<7>[    0.000000]   7 disabled
<7>[    0.000000] TOM2: 0000000250000000 aka 9472M
<6>[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
<7>[    0.000000] e820 update range: 00000000b0000000 - 0000000100000000 (usable) ==> (reserved)
<6>[    0.000000] last_pfn = 0xafde0 max_arch_pfn = 0x400000000
<6>[    0.000000] found SMP MP-table at [ffff8800000f7940] f7940
<7>[    0.000000] initial memory mapped : 0 - 20000000
<7>[    0.000000] Base memory trampoline at [ffff880000096000] 96000 size 20480
<6>[    0.000000] Using GB pages for direct mapping
<6>[    0.000000] init_memory_mapping: 0000000000000000-00000000afde0000
<7>[    0.000000]  0000000000 - 0080000000 page 1G
<7>[    0.000000]  0080000000 - 00afc00000 page 2M
<7>[    0.000000]  00afc00000 - 00afde0000 page 4k
<7>[    0.000000] kernel direct mapping tables up to afde0000 @ 1fffd000-20000000
<6>[    0.000000] init_memory_mapping: 0000000100000000-0000000250000000
<7>[    0.000000]  0100000000 - 0240000000 page 1G
<7>[    0.000000]  0240000000 - 0250000000 page 2M
<7>[    0.000000] kernel direct mapping tables up to 250000000 @ afdde000-afde0000
<6>[    0.000000] RAMDISK: 35606000 - 36afb000
<4>[    0.000000] ACPI: RSDP 00000000000f7910 00024 (v02 PTLTD )
<4>[    0.000000] ACPI: XSDT 00000000afde2a70 00064 (v01 PTLTD  ? XSDT   06040000  LTP 00000000)
<4>[    0.000000] ACPI: FACP 00000000afde87c2 000F4 (v03 NVIDIA CK8S     06040000 PTL_ 000F4240)
<4>[    0.000000] ACPI: DSDT 00000000afde2ad4 05C7A (v01 NVIDIA      CK8 06040000 MSFT 03000000)
<4>[    0.000000] ACPI: FACS 00000000afdeafc0 00040
<4>[    0.000000] ACPI: SRAT 00000000afde88b6 00150 (v01 AMD    FAM_F_10 06040000 AMD  00000001)
<4>[    0.000000] ACPI: SSDT 00000000afde8a06 0143C (v01 AMD    POWERNOW 06040000 AMD  00000001)
<4>[    0.000000] ACPI: SPCR 00000000afde9e42 00050 (v01 PTLTD  $UCRTBL$ 06040000 PTL  00000001)
<4>[    0.000000] ACPI: MCFG 00000000afde9e92 0003C (v01 PTLTD    MCFG   06040000  LTP 00000000)
<4>[    0.000000] ACPI: HPET 00000000afde9ece 00038 (v01 PTLTD  HPETTBL  06040000  LTP 00000001)
<4>[    0.000000] ACPI: APIC 00000000afde9f06 000D2 (v01 PTLTD  ? APIC   06040000  LTP 00000000)
<4>[    0.000000] ACPI: BOOT 00000000afde9fd8 00028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
<7>[    0.000000] ACPI: Local APIC address 0xfee00000
<6>[    0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
<6>[    0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
<6>[    0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
<6>[    0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
<6>[    0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
<6>[    0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
<6>[    0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
<6>[    0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
<6>[    0.000000] SRAT: Node 0 PXM 0 0-a0000
<6>[    0.000000] SRAT: Node 0 PXM 0 100000-b0000000
<6>[    0.000000] SRAT: Node 0 PXM 0 100000000-150000000
<6>[    0.000000] SRAT: Node 1 PXM 1 150000000-250000000
<6>[    0.000000] NUMA: Node 0 [0,a0000) + [100000,b0000000) -> [0,b0000000)
<6>[    0.000000] NUMA: Node 0 [0,b0000000) + [100000000,150000000) -> [0,150000000)
<6>[    0.000000] Initmem setup node 0 0000000000000000-0000000150000000
<6>[    0.000000]   NODE_DATA [000000014fffb000 - 000000014fffffff]
<6>[    0.000000] Initmem setup node 1 0000000150000000-0000000250000000
<6>[    0.000000]   NODE_DATA [000000024fffb000 - 000000024fffffff]
<7>[    0.000000]  [ffffea0000000000-ffffea00053fffff] PMD -> [ffff88014be00000-ffff88014fdfffff] on node 0
<7>[    0.000000]  [ffffea0005400000-ffffea00093fffff] PMD -> [ffff88024b600000-ffff88024f5fffff] on node 1
<4>[    0.000000] Zone PFN ranges:
<4>[    0.000000]   DMA      0x00000010 -> 0x00001000
<4>[    0.000000]   DMA32    0x00001000 -> 0x00100000
<4>[    0.000000]   Normal   0x00100000 -> 0x00250000
<4>[    0.000000] Movable zone start PFN for each node
<4>[    0.000000] early_node_map[4] active PFN ranges
<4>[    0.000000]     0: 0x00000010 -> 0x0000009b
<4>[    0.000000]     0: 0x00000100 -> 0x000afde0
<4>[    0.000000]     0: 0x00100000 -> 0x00150000
<4>[    0.000000]     1: 0x00150000 -> 0x00250000
<7>[    0.000000] On node 0 totalpages: 1047915
<7>[    0.000000]   DMA zone: 64 pages used for memmap
<7>[    0.000000]   DMA zone: 5 pages reserved
<7>[    0.000000]   DMA zone: 3910 pages, LIFO batch:0
<7>[    0.000000]   DMA32 zone: 16320 pages used for memmap
<7>[    0.000000]   DMA32 zone: 699936 pages, LIFO batch:31
<7>[    0.000000]   Normal zone: 5120 pages used for memmap
<7>[    0.000000]   Normal zone: 322560 pages, LIFO batch:31
<7>[    0.000000] On node 1 totalpages: 1048576
<7>[    0.000000]   Normal zone: 16384 pages used for memmap
<7>[    0.000000]   Normal zone: 1032192 pages, LIFO batch:31
<6>[    0.000000] ACPI: PM-Timer IO Port: 0x1008
<7>[    0.000000] ACPI: Local APIC address 0xfee00000
<6>[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
<6>[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
<6>[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
<6>[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
<6>[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
<6>[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
<6>[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
<6>[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
<6>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
<6>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
<6>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
<6>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
<6>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
<6>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
<6>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
<6>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
<6>[    0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
<6>[    0.000000] IOAPIC[0]: apic_id 8, version 17, address 0xfec00000, GSI 0-23
<6>[    0.000000] ACPI: IOAPIC (id[0x09] address[0xc8000000] gsi_base[24])
<6>[    0.000000] IOAPIC[1]: apic_id 9, version 17, address 0xc8000000, GSI 24-47
<6>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
<6>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
<6>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<7>[    0.000000] ACPI: IRQ0 used by override.
<7>[    0.000000] ACPI: IRQ2 used by override.
<7>[    0.000000] ACPI: IRQ9 used by override.
<6>[    0.000000] Using ACPI (MADT) for SMP configuration information
<6>[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
<6>[    0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
<7>[    0.000000] nr_irqs_gsi: 64
<6>[    0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000
<6>[    0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
<6>[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
<6>[    0.000000] PM: Registered nosave memory: 00000000000d2000 - 0000000000100000
<6>[    0.000000] PM: Registered nosave memory: 00000000afde0000 - 00000000afdea000
<6>[    0.000000] PM: Registered nosave memory: 00000000afdea000 - 00000000afdeb000
<6>[    0.000000] PM: Registered nosave memory: 00000000afdeb000 - 00000000b0000000
<6>[    0.000000] PM: Registered nosave memory: 00000000b0000000 - 00000000b4000000
<6>[    0.000000] PM: Registered nosave memory: 00000000b4000000 - 00000000b8000000
<6>[    0.000000] PM: Registered nosave memory: 00000000b8000000 - 00000000e0000000
<6>[    0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
<6>[    0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
<6>[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
<6>[    0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fee00000
<6>[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
<6>[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff80000
<6>[    0.000000] PM: Registered nosave memory: 00000000fff80000 - 0000000100000000
<6>[    0.000000] Allocating PCI resources starting at b8000000 (gap: b8000000:28000000)
<6>[    0.000000] Booting paravirtualized kernel on bare hardware
<6>[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:2
<6>[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88014bc00000 s83328 r8192 d23168 u524288
<7>[    0.000000] pcpu-alloc: s83328 r8192 d23168 u524288 alloc=1*2097152
<7>[    0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7 
<4>[    0.000000] Built 2 zonelists in Zone order, mobility grouping on.  Total pages: 2058598
<4>[    0.000000] Policy zone: Normal
<5>[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-40-lowlatency root=UUID=32b73871-8597-4b14-8b63-45aa173dfbc3 ro quiet splash vt.handoff=7
<6>[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
<6>[    0.000000] Checking aperture...
<6>[    0.000000] No AGP bridge found
<6>[    0.000000] Node 0: aperture @ b4000000 size 64 MB
<6>[    0.000000] Node 1: aperture @ b4000000 size 64 MB
<6>[    0.000000] Memory: 8150588k/9699328k available (6632k kernel code, 1313364k absent, 235376k reserved, 6576k data, 868k init)
<6>[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=2
<6>[    0.000000] Preemptible hierarchical RCU implementation.
<6>[    0.000000] 	Verbose stalled-CPUs detection is disabled.
<6>[    0.000000] NR_IRQS:16640 nr_irqs:1152 16
<6>[    0.000000] Extended CMOS year: 2000
<7>[    0.000000] spurious 8259A interrupt: IRQ7.
<6>[    0.000000] vt handoff: transparent VT on vt#7
<6>[    0.000000] Console: colour dummy device 80x25
<6>[    0.000000] console [tty0] enabled
<6>[    0.000000] allocated 67108864 bytes of page_cgroup
<6>[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
<7>[    0.000000] hpet clockevent registered
<4>[    0.000000] Fast TSC calibration using PIT
<4>[    0.000000] Detected 2299.929 MHz processor.
<6>[    0.001005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4599.85 BogoMIPS (lpj=2299929)
<6>[    0.001010] pid_max: default: 32768 minimum: 301
<6>[    0.001054] Security Framework initialized
<6>[    0.001070] AppArmor: AppArmor initialized
<6>[    0.001072] Yama: becoming mindful.
<6>[    0.002482] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
<6>[    0.006213] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
<6>[    0.007826] Mount-cache hash table entries: 256
<6>[    0.008022] Initializing cgroup subsys cpuacct
<6>[    0.008029] Initializing cgroup subsys memory
<6>[    0.008057] Initializing cgroup subsys devices
<6>[    0.008059] Initializing cgroup subsys freezer
<6>[    0.008062] Initializing cgroup subsys blkio
<6>[    0.008069] Initializing cgroup subsys perf_event
<7>[    0.008105] tseg: 00afe00000
<6>[    0.008107] CPU: Physical Processor ID: 0
<6>[    0.008109] CPU: Processor Core ID: 0
<6>[    0.008111] mce: CPU supports 6 MCE banks
<6>[    0.008122] using AMD E400 aware idle routine
<6>[    0.008883] ACPI: Core revision 20110623
<6>[    0.013011] ftrace: allocating 26511 entries in 104 pages
<6>[    0.016573] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
<6>[    0.026614] CPU0: Quad-Core AMD Opteron(tm) Processor 2356 stepping 03
<6>[    0.026998] Performance Events: AMD PMU driver.
<6>[    0.026998] ... version:                0
<6>[    0.026998] ... bit width:              48
<6>[    0.026998] ... generic registers:      4
<6>[    0.026998] ... value mask:             0000ffffffffffff
<6>[    0.026998] ... max period:             00007fffffffffff
<6>[    0.026998] ... fixed-purpose events:   0
<6>[    0.026998] ... event mask:             000000000000000f
<6>[    0.032084] NMI watchdog enabled, takes one hw-pmu counter.
<6>[    0.040013] Booting Node   0, Processors  #1
<7>[    0.040016] smpboot cpu 1: start_ip = 96000
<6>[    0.112016] NMI watchdog enabled, takes one hw-pmu counter.
<4>[    0.118010]  #2
<7>[    0.118012] smpboot cpu 2: start_ip = 96000
<6>[    0.190001] NMI watchdog enabled, takes one hw-pmu counter.
<4>[    0.195998]  #3
<7>[    0.195999] smpboot cpu 3: start_ip = 96000
<6>[    0.267989] NMI watchdog enabled, takes one hw-pmu counter.
<4>[    0.273991]  Ok.
<6>[    0.273993] Booting Node   1, Processors  #4
<7>[    0.273995] smpboot cpu 4: start_ip = 96000
<6>[    0.345983] NMI watchdog enabled, takes one hw-pmu counter.
<4>[    0.351975]  #5
<7>[    0.351976] smpboot cpu 5: start_ip = 96000
<6>[    0.423970] NMI watchdog enabled, takes one hw-pmu counter.
<4>[    0.429964]  #6
<7>[    0.429966] smpboot cpu 6: start_ip = 96000
<6>[    0.501958] NMI watchdog enabled, takes one hw-pmu counter.
<4>[    0.507949]  #7 Ok.
<7>[    0.507951] smpboot cpu 7: start_ip = 96000
<6>[    0.579946] NMI watchdog enabled, takes one hw-pmu counter.
<6>[    0.581924] Brought up 8 CPUs
<6>[    0.581927] Total of 8 processors activated (36812.65 BogoMIPS).
<6>[    0.583975] devtmpfs: initialized
<6>[    0.585381] EVM: security.selinux
<6>[    0.585383] EVM: security.SMACK64
<6>[    0.585384] EVM: security.capability
<6>[    0.585417] PM: Registering ACPI NVS region at afdea000 (4096 bytes)
<6>[    0.586677] print_constraints: dummy: 
<6>[    0.586726] RTC time:  4:52:41, date: 04/28/13
<6>[    0.586771] NET: Registered protocol family 16
<7>[    0.586900] node 0 link 2: io port [1000, 4fff]
<7>[    0.586903] node 1 link 0: io port [5000, 5fff]
<7>[    0.586905] node 1 link 0: io port [f000, ffff]
<6>[    0.586908] TOM: 00000000b0000000 aka 2816M
<7>[    0.586911] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
<7>[    0.586914] node 0 link 2: mmio [b8000000, c7ffffff]
<7>[    0.586917] node 1 link 0: mmio [c8000000, cfffffff]
<7>[    0.586927] node 0 link 2: mmio [a0000, bffff]
<7>[    0.586930] node 0 link 2: mmio [e0000000, e7ffffff] ==> none
<7>[    0.586933] node 1 link 0: mmio [e8000000, efffffff] ==> none
<6>[    0.586935] TOM2: 0000000250000000 aka 9472M
<7>[    0.586938] bus: [00, 7f] on node 0 link 2
<7>[    0.586940] bus: 00 index 0 [io  0x0000-0x4fff]
<7>[    0.586942] bus: 00 index 1 [io  0x6000-0xefff]
<7>[    0.586943] bus: 00 index 2 [mem 0xb0000000-0xc7ffffff]
<7>[    0.586945] bus: 00 index 3 [mem 0x000a0000-0x000bffff]
<7>[    0.586947] bus: 00 index 4 [mem 0xf0000000-0xffffffff]
<7>[    0.586949] bus: 00 index 5 [mem 0xd0000000-0xdfffffff]
<7>[    0.586951] bus: 00 index 6 [mem 0x250000000-0xfcffffffff]
<7>[    0.586953] bus: [80, ff] on node 1 link 0
<7>[    0.586955] bus: 80 index 0 [io  0x5000-0x5fff]
<7>[    0.586956] bus: 80 index 1 [io  0xf000-0xffff]
<7>[    0.586958] bus: 80 index 2 [mem 0xc8000000-0xcfffffff]
<6>[    0.586785] Trying to unpack rootfs image as initramfs...
<6>[    0.586973] Extended Config Space enabled on 2 nodes
<6>[    0.587010] ACPI: bus type pci registered
<6>[    0.587082] PCI: MMCONFIG for domain 0000 [bus 00-82] at [mem 0xe0000000-0xe82fffff] (base 0xe0000000)
<6>[    0.587085] PCI: MMCONFIG at [mem 0xe0000000-0xe82fffff] reserved in E820
<6>[    0.599482] PCI: Using configuration type 1 for base access
<6>[    0.600523] bio: create slab <bio-0> at 0
<6>[    0.600523] ACPI: Added _OSI(Module Device)
<6>[    0.600523] ACPI: Added _OSI(Processor Device)
<6>[    0.600523] ACPI: Added _OSI(3.0 _SCP Extensions)
<6>[    0.600523] ACPI: Added _OSI(Processor Aggregator Device)
<7>[    0.601772] ACPI: EC: Look up EC in DSDT
<6>[    0.605369] ACPI: Interpreter enabled
<6>[    0.605375] ACPI: (supports S0 S1 S3 S4 S5)
<6>[    0.605396] ACPI: Using IOAPIC for interrupt routing
<6>[    0.611538] ACPI: No dock devices found.
<6>[    0.611541] HEST: Table not found.
<6>[    0.611545] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
<6>[    0.611666] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7f])
<6>[    0.611872] pci_root PNP0A03:00: host bridge window [io  0x0000-0x03af]
<6>[    0.611875] pci_root PNP0A03:00: host bridge window [io  0x03b0-0x03df]
<6>[    0.611877] pci_root PNP0A03:00: host bridge window [io  0x03e0-0x0cf7]
<6>[    0.611879] pci_root PNP0A03:00: host bridge window [io  0x0d00-0x4fff]
<6>[    0.611882] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
<6>[    0.611884] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
<6>[    0.611887] pci_root PNP0A03:00: host bridge window [mem 0xb0000000-0xc7ffffff]
<6>[    0.611894] pci_root PNP0A03:00: ignoring host bridge window [mem 0x000c0000-0x000dffff] (conflicts with reserved [mem 0x000d2000-0x000fffff])
<7>[    0.611929] pci 0000:00:00.0: [10de:0369] type 0 class 0x000500
<7>[    0.612122] pci 0000:00:01.0: [10de:0364] type 0 class 0x000601
<7>[    0.612130] pci 0000:00:01.0: reg 10: [io  0x1c00-0x1c7f]
<7>[    0.612168] pci 0000:00:01.1: [10de:0368] type 0 class 0x000c05
<7>[    0.612181] pci 0000:00:01.1: reg 10: [io  0x2000-0x203f]
<7>[    0.612201] pci 0000:00:01.1: reg 20: [io  0x2440-0x247f]
<7>[    0.612207] pci 0000:00:01.1: reg 24: [io  0x2400-0x243f]
<7>[    0.612241] pci 0000:00:01.1: PME# supported from D3hot D3cold
<7>[    0.612247] pci 0000:00:01.1: PME# disabled
<7>[    0.612268] pci 0000:00:02.0: [10de:036c] type 0 class 0x000c03
<7>[    0.612281] pci 0000:00:02.0: reg 10: [mem 0xb8004000-0xb8004fff]
<7>[    0.612318] pci 0000:00:02.0: supports D1 D2
<7>[    0.612328] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
<7>[    0.612336] pci 0000:00:02.0: PME# disabled
<7>[    0.612347] pci 0000:00:02.1: [10de:036d] type 0 class 0x000c03
<7>[    0.612357] pci 0000:00:02.1: reg 10: [mem 0xb8005000-0xb80050ff]
<7>[    0.612396] pci 0000:00:02.1: supports D1 D2
<7>[    0.612398] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
<7>[    0.612401] pci 0000:00:02.1: PME# disabled
<7>[    0.612418] pci 0000:00:04.0: [10de:036e] type 0 class 0x000101
<7>[    0.612439] pci 0000:00:04.0: reg 20: [io  0x2480-0x248f]
<7>[    0.612468] pci 0000:00:05.0: [10de:037f] type 0 class 0x000101
<7>[    0.612478] pci 0000:00:05.0: reg 10: [io  0x24d0-0x24d7]
<7>[    0.612484] pci 0000:00:05.0: reg 14: [io  0x24c4-0x24c7]
<7>[    0.612489] pci 0000:00:05.0: reg 18: [io  0x24c8-0x24cf]
<7>[    0.612494] pci 0000:00:05.0: reg 1c: [io  0x24c0-0x24c3]
<7>[    0.612499] pci 0000:00:05.0: reg 20: [io  0x2490-0x249f]
<7>[    0.612504] pci 0000:00:05.0: reg 24: [mem 0xb8006000-0xb8006fff]
<7>[    0.612540] pci 0000:00:05.1: [10de:037f] type 0 class 0x000101
<7>[    0.612550] pci 0000:00:05.1: reg 10: [io  0x24e8-0x24ef]
<7>[    0.612555] pci 0000:00:05.1: reg 14: [io  0x24dc-0x24df]
<7>[    0.612561] pci 0000:00:05.1: reg 18: [io  0x24e0-0x24e7]
<7>[    0.612566] pci 0000:00:05.1: reg 1c: [io  0x24d8-0x24db]
<7>[    0.612571] pci 0000:00:05.1: reg 20: [io  0x24a0-0x24af]
<7>[    0.612576] pci 0000:00:05.1: reg 24: [mem 0xb8007000-0xb8007fff]
<7>[    0.612611] pci 0000:00:05.2: [10de:037f] type 0 class 0x000101
<7>[    0.612621] pci 0000:00:05.2: reg 10: [io  0x2800-0x2807]
<7>[    0.612626] pci 0000:00:05.2: reg 14: [io  0x24f4-0x24f7]
<7>[    0.612631] pci 0000:00:05.2: reg 18: [io  0x24f8-0x24ff]
<7>[    0.612637] pci 0000:00:05.2: reg 1c: [io  0x24f0-0x24f3]
<7>[    0.612642] pci 0000:00:05.2: reg 20: [io  0x24b0-0x24bf]
<7>[    0.612647] pci 0000:00:05.2: reg 24: [mem 0xb8008000-0xb8008fff]
<7>[    0.612685] pci 0000:00:06.0: [10de:0370] type 1 class 0x000604
<7>[    0.612724] pci 0000:00:06.1: [10de:0371] type 0 class 0x000403
<7>[    0.612736] pci 0000:00:06.1: reg 10: [mem 0xb8000000-0xb8003fff]
<7>[    0.612781] pci 0000:00:06.1: PME# supported from D3hot D3cold
<7>[    0.612784] pci 0000:00:06.1: PME# disabled
<7>[    0.612808] pci 0000:00:08.0: [10de:0373] type 0 class 0x000680
<7>[    0.612821] pci 0000:00:08.0: reg 10: [mem 0xb8009000-0xb8009fff]
<7>[    0.612827] pci 0000:00:08.0: reg 14: [io  0x2808-0x280f]
<7>[    0.612832] pci 0000:00:08.0: reg 18: [mem 0xb8005800-0xb80058ff]
<7>[    0.612837] pci 0000:00:08.0: reg 1c: [mem 0xb8005400-0xb800540f]
<7>[    0.612876] pci 0000:00:08.0: supports D1 D2
<7>[    0.612878] pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold
<7>[    0.612883] pci 0000:00:08.0: PME# disabled
<7>[    0.612900] pci 0000:00:09.0: [10de:0373] type 0 class 0x000680
<7>[    0.612913] pci 0000:00:09.0: reg 10: [mem 0xb800b000-0xb800bfff]
<7>[    0.612924] pci 0000:00:09.0: reg 14: [io  0x2810-0x2817]
<7>[    0.612929] pci 0000:00:09.0: reg 18: [mem 0xb800a000-0xb800a0ff]
<7>[    0.612935] pci 0000:00:09.0: reg 1c: [mem 0xb8005c00-0xb8005c0f]
<7>[    0.612973] pci 0000:00:09.0: supports D1 D2
<7>[    0.612975] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
<7>[    0.612980] pci 0000:00:09.0: PME# disabled
<7>[    0.612997] pci 0000:00:0a.0: [10de:0376] type 1 class 0x000604
<7>[    0.613034] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
<7>[    0.613037] pci 0000:00:0a.0: PME# disabled
<7>[    0.613056] pci 0000:00:0d.0: [10de:0378] type 1 class 0x000604
<7>[    0.613092] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
<7>[    0.613095] pci 0000:00:0d.0: PME# disabled
<7>[    0.613112] pci 0000:00:0f.0: [10de:0377] type 1 class 0x000604
<7>[    0.613147] pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold
<7>[    0.613150] pci 0000:00:0f.0: PME# disabled
<7>[    0.613170] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
<7>[    0.613204] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
<7>[    0.613223] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
<7>[    0.613244] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
<7>[    0.613269] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
<7>[    0.613292] pci 0000:00:19.0: [1022:1200] type 0 class 0x000600
<7>[    0.613327] pci 0000:00:19.1: [1022:1201] type 0 class 0x000600
<7>[    0.613347] pci 0000:00:19.2: [1022:1202] type 0 class 0x000600
<7>[    0.613369] pci 0000:00:19.3: [1022:1203] type 0 class 0x000600
<7>[    0.613395] pci 0000:00:19.4: [1022:1204] type 0 class 0x000600
<7>[    0.613446] pci 0000:01:05.0: [104c:8023] type 0 class 0x000c00
<7>[    0.613459] pci 0000:01:05.0: reg 10: [mem 0xb8104000-0xb81047ff]
<7>[    0.613467] pci 0000:01:05.0: reg 14: [mem 0xb8100000-0xb8103fff]
<7>[    0.613515] pci 0000:01:05.0: supports D1 D2
<7>[    0.613517] pci 0000:01:05.0: PME# supported from D0 D1 D2 D3hot
<7>[    0.613521] pci 0000:01:05.0: PME# disabled
<6>[    0.613548] pci 0000:00:06.0: PCI bridge to [bus 01-01] (subtractive decode)
<7>[    0.613553] pci 0000:00:06.0:   bridge window [mem 0xb8100000-0xb81fffff]
<7>[    0.613556] pci 0000:00:06.0:   bridge window [io  0x0000-0x03af] (subtractive decode)
<7>[    0.613559] pci 0000:00:06.0:   bridge window [io  0x03b0-0x03df] (subtractive decode)
<7>[    0.613561] pci 0000:00:06.0:   bridge window [io  0x03e0-0x0cf7] (subtractive decode)
<7>[    0.613564] pci 0000:00:06.0:   bridge window [io  0x0d00-0x4fff] (subtractive decode)
<7>[    0.613566] pci 0000:00:06.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
<7>[    0.613569] pci 0000:00:06.0:   bridge window [mem 0xb0000000-0xc7ffffff] (subtractive decode)
<7>[    0.613609] pci 0000:02:00.0: [10b5:8608] type 1 class 0x000604
<7>[    0.613620] pci 0000:02:00.0: reg 10: [mem 0xb8200000-0xb821ffff]
<7>[    0.613675] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
<7>[    0.613678] pci 0000:02:00.0: PME# disabled
<6>[    0.614932] pci 0000:00:0a.0: PCI bridge to [bus 02-07]
<7>[    0.614940] pci 0000:00:0a.0:   bridge window [io  0x3000-0x3fff]
<7>[    0.614944] pci 0000:00:0a.0:   bridge window [mem 0xb8200000-0xb84fffff]
<7>[    0.615022] pci 0000:03:01.0: [10b5:8608] type 1 class 0x000604
<7>[    0.615022] pci 0000:03:01.0: PME# supported from D0 D3hot D3cold
<7>[    0.615022] pci 0000:03:01.0: PME# disabled
<7>[    0.615022] pci 0000:03:05.0: [10b5:8608] type 1 class 0x000604
<7>[    0.615058] pci 0000:03:05.0: PME# supported from D0 D3hot D3cold
<7>[    0.615062] pci 0000:03:05.0: PME# disabled
<7>[    0.615089] pci 0000:03:07.0: [10b5:8608] type 1 class 0x000604
<7>[    0.615153] pci 0000:03:07.0: PME# supported from D0 D3hot D3cold
<7>[    0.615156] pci 0000:03:07.0: PME# disabled
<7>[    0.615184] pci 0000:03:09.0: [10b5:8608] type 1 class 0x000604
<7>[    0.615248] pci 0000:03:09.0: PME# supported from D0 D3hot D3cold
<7>[    0.615251] pci 0000:03:09.0: PME# disabled
<6>[    0.615286] pci 0000:02:00.0: PCI bridge to [bus 03-07]
<7>[    0.615291] pci 0000:02:00.0:   bridge window [io  0x3000-0x3fff]
<7>[    0.615295] pci 0000:02:00.0:   bridge window [mem 0xb8300000-0xb84fffff]
<7>[    0.615356] pci 0000:04:00.0: [1033:0194] type 0 class 0x000c03
<7>[    0.615377] pci 0000:04:00.0: reg 10: [mem 0xb8300000-0xb8301fff 64bit]
<7>[    0.615479] pci 0000:04:00.0: PME# supported from D0 D3hot
<7>[    0.615483] pci 0000:04:00.0: PME# disabled
<6>[    0.616938] pci 0000:03:01.0: PCI bridge to [bus 04-04]
<7>[    0.616949] pci 0000:03:01.0:   bridge window [mem 0xb8300000-0xb83fffff]
<7>[    0.617041] pci 0000:05:00.0: [1b4b:9120] type 0 class 0x000106
<7>[    0.617057] pci 0000:05:00.0: reg 10: [io  0x3020-0x3027]
<7>[    0.617067] pci 0000:05:00.0: reg 14: [io  0x3014-0x3017]
<7>[    0.617077] pci 0000:05:00.0: reg 18: [io  0x3018-0x301f]
<7>[    0.617086] pci 0000:05:00.0: reg 1c: [io  0x3010-0x3013]
<7>[    0.617096] pci 0000:05:00.0: reg 20: [io  0x3000-0x300f]
<7>[    0.617106] pci 0000:05:00.0: reg 24: [mem 0xb8400000-0xb84007ff]
<7>[    0.617116] pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
<7>[    0.617167] pci 0000:05:00.0: PME# supported from D3hot
<7>[    0.617172] pci 0000:05:00.0: PME# disabled
<6>[    0.619061] pci 0000:03:05.0: PCI bridge to [bus 05-05]
<7>[    0.619061] pci 0000:03:05.0:   bridge window [io  0x3000-0x3fff]
<7>[    0.619061] pci 0000:03:05.0:   bridge window [mem 0xb8400000-0xb84fffff]
<6>[    0.619061] pci 0000:03:07.0: PCI bridge to [bus 06-06]
<6>[    0.619061] pci 0000:03:09.0: PCI bridge to [bus 07-07]
<7>[    0.619093] pci 0000:08:00.0: [1033:0125] type 1 class 0x000604
<7>[    0.619155] pci 0000:08:00.0: supports D1
<7>[    0.619157] pci 0000:08:00.0: PME# supported from D0 D1 D3hot D3cold
<7>[    0.619161] pci 0000:08:00.0: PME# disabled
<7>[    0.619183] pci 0000:08:00.1: [1033:0125] type 1 class 0x000604
<7>[    0.619203] pci 0000:08:00.1: reg 10: [mem 0xb8500000-0xb850007f 64bit]
<7>[    0.619274] pci 0000:08:00.1: supports D1
<7>[    0.619276] pci 0000:08:00.1: PME# supported from D0 D1 D3hot D3cold
<7>[    0.619280] pci 0000:08:00.1: PME# disabled
<6>[    0.619303] pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
<6>[    0.619313] pci 0000:00:0d.0: PCI bridge to [bus 08-0a]
<7>[    0.619318] pci 0000:00:0d.0:   bridge window [mem 0xb8500000-0xb85fffff]
<6>[    0.619378] pci 0000:08:00.0: PCI bridge to [bus 09-09]
<6>[    0.619468] pci 0000:08:00.1: PCI bridge to [bus 0a-0a]
<7>[    0.619524] pci 0000:0b:00.0: [1002:5b63] type 0 class 0x000300
<7>[    0.619534] pci 0000:0b:00.0: reg 10: [mem 0xc0000000-0xc7ffffff pref]
<7>[    0.619542] pci 0000:0b:00.0: reg 14: [io  0x4000-0x40ff]
<7>[    0.619549] pci 0000:0b:00.0: reg 18: [mem 0xb8600000-0xb860ffff]
<7>[    0.619571] pci 0000:0b:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
<7>[    0.619602] pci 0000:0b:00.0: supports D1 D2
<7>[    0.619621] pci 0000:0b:00.1: [1002:5b73] type 0 class 0x000380
<7>[    0.619634] pci 0000:0b:00.1: reg 10: [mem 0xb8610000-0xb861ffff]
<7>[    0.619687] pci 0000:0b:00.1: supports D1 D2
<6>[    0.619699] pci 0000:0b:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
<6>[    0.619707] pci 0000:00:0f.0: PCI bridge to [bus 0b-0b]
<7>[    0.619710] pci 0000:00:0f.0:   bridge window [io  0x4000-0x4fff]
<7>[    0.619713] pci 0000:00:0f.0:   bridge window [mem 0xb8600000-0xb86fffff]
<7>[    0.619717] pci 0000:00:0f.0:   bridge window [mem 0xc0000000-0xc7ffffff 64bit pref]
<7>[    0.619730] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<7>[    0.619946] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
<7>[    0.619985] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT]
<7>[    0.620010] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT]
<7>[    0.620031] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2.NECA._PRT]
<7>[    0.620068] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR5._PRT]
<6>[    0.620095]  pci0000:00: Requesting ACPI _OSC control (0x1d)
<6>[    0.620100]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
<6>[    0.620102] ACPI _OSC control for PCIe not granted, disabling ASPM
<6>[    0.637905] ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-ff])
<6>[    0.638074] pci_root PNP0A03:01: host bridge window [io  0x5000-0xffff]
<6>[    0.638077] pci_root PNP0A03:01: host bridge window [io  0x03b0-0x03df]
<6>[    0.638079] pci_root PNP0A03:01: host bridge window [mem 0x000a0000-0x000bffff]
<6>[    0.638082] pci_root PNP0A03:01: host bridge window [mem 0x000c0000-0x000dffff]
<6>[    0.638084] pci_root PNP0A03:01: host bridge window [mem 0xc8000000-0xcfffffff]
<6>[    0.638090] pci_root PNP0A03:01: ignoring host bridge window [mem 0x000c0000-0x000dffff] (conflicts with reserved [mem 0x000d2000-0x000fffff])
<7>[    0.638115] pci 0000:80:00.0: [10de:0369] type 0 class 0x000500
<7>[    0.638305] pci 0000:80:01.0: [10de:0361] type 0 class 0x000500
<7>[    0.638313] pci 0000:80:01.0: reg 10: [io  0xfc00-0xfc7f]
<7>[    0.638319] pci 0000:80:01.0: reg 14: [mem 0xc8000000-0xc8000fff]
<7>[    0.638356] pci 0000:80:01.1: [10de:0368] type 0 class 0x000c05
<7>[    0.638370] pci 0000:80:01.1: reg 10: [io  0x5000-0x503f]
<7>[    0.638391] pci 0000:80:01.1: reg 20: [io  0x5440-0x547f]
<7>[    0.638397] pci 0000:80:01.1: reg 24: [io  0x5400-0x543f]
<7>[    0.638432] pci 0000:80:01.1: PME# supported from D3hot D3cold
<7>[    0.638438] pci 0000:80:01.1: PME# disabled
<7>[    0.638472] pci 0000:80:0a.0: [10de:0376] type 1 class 0x000604
<7>[    0.638525] pci 0000:80:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
<7>[    0.638531] pci 0000:80:0a.0: PME# disabled
<7>[    0.638551] pci 0000:80:0d.0: [10de:0378] type 1 class 0x000604
<7>[    0.638590] pci 0000:80:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
<7>[    0.638593] pci 0000:80:0d.0: PME# disabled
<7>[    0.638612] pci 0000:80:0f.0: [10de:0377] type 1 class 0x000604
<7>[    0.638651] pci 0000:80:0f.0: PME# supported from D0 D1 D2 D3hot D3cold
<7>[    0.638654] pci 0000:80:0f.0: PME# disabled
<6>[    0.638706] pci 0000:80:0a.0: PCI bridge to [bus 81-81]
<6>[    0.638740] pci 0000:80:0d.0: PCI bridge to [bus 82-82]
<6>[    0.638774] pci 0000:80:0f.0: PCI bridge to [bus 83-83]
<7>[    0.638787] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
<7>[    0.638830] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.XVR0._PRT]
<7>[    0.638855] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.XVR2._PRT]
<7>[    0.638881] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.XVR5._PRT]
<6>[    0.638903]  pci0000:80: Requesting ACPI _OSC control (0x1d)
<6>[    0.638906]  pci0000:80: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
<6>[    0.638908] ACPI _OSC control for PCIe not granted, disabling ASPM
<6>[    0.641754] ACPI: PCI Interrupt Link [LNK1] (IRQs 16 17 18 19 20 21 22 23) *11
<6>[    0.641824] ACPI: PCI Interrupt Link [LNK2] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
<6>[    0.641895] ACPI: PCI Interrupt Link [LNK3] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
<6>[    0.641971] ACPI: PCI Interrupt Link [LNK4] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
<6>[    0.642041] ACPI: PCI Interrupt Link [LK1E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
<6>[    0.642109] ACPI: PCI Interrupt Link [LK2E] (IRQs 16 17 18 19 20 21 22 23) *11
<6>[    0.642175] ACPI: PCI Interrupt Link [LK3E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
<6>[    0.642242] ACPI: PCI Interrupt Link [LK4E] (IRQs 16 17 18 19 20 21 22 23) *11
<6>[    0.642308] ACPI: PCI Interrupt Link [LSMB] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
<6>[    0.642378] ACPI: PCI Interrupt Link [LUS0] (IRQs 16 17 18 19 20 21 22 23) *10
<6>[    0.642444] ACPI: PCI Interrupt Link [LMA2] (IRQs 16 17 18 19 20 21 22 23) *10
<6>[    0.642510] ACPI: PCI Interrupt Link [LUS2] (IRQs 16 17 18 19 20 21 22 23) *11
<6>[    0.642579] ACPI: PCI Interrupt Link [LMAC] (IRQs 16 17 18 19 20 21 22 23) *11
<6>[    0.642646] ACPI: PCI Interrupt Link [LAZA] (IRQs 16 17 18 19 20 21 22 23) *10
<6>[    0.642712] ACPI: PCI Interrupt Link [LPID] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
<6>[    0.642779] ACPI: PCI Interrupt Link [LTID] (IRQs 16 17 18 19 20 21 22 23) *7
<6>[    0.642846] ACPI: PCI Interrupt Link [LSI1] (IRQs 16 17 18 19 20 21 22 23) *5
<6>[    0.642919] ACPI: PCI Interrupt Link [LSI2] (IRQs 16 17 18 19 20 21 22 23) *10
<6>[    0.642993] ACPI: PCI Interrupt Link [LK1E] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
<6>[    0.643065] ACPI: PCI Interrupt Link [LK2E] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
<6>[    0.643137] ACPI: PCI Interrupt Link [LK3E] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
<6>[    0.643212] ACPI: PCI Interrupt Link [LK4E] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
<6>[    0.643283] ACPI: PCI Interrupt Link [LUS0] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
<6>[    0.643355] ACPI: PCI Interrupt Link [LMA2] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
<6>[    0.643426] ACPI: PCI Interrupt Link [LUS2] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
<6>[    0.643503] ACPI: PCI Interrupt Link [LMAC] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
<6>[    0.643577] ACPI: PCI Interrupt Link [LPID] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
<6>[    0.643653] ACPI: PCI Interrupt Link [LTID] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
<6>[    0.643724] ACPI: PCI Interrupt Link [LSI1] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
<6>[    0.643801] ACPI: PCI Interrupt Link [LSI2] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
<6>[    0.643946] vgaarb: device added: PCI:0000:0b:00.0,decodes=io+mem,owns=io+mem,locks=none
<6>[    0.643951] vgaarb: loaded
<6>[    0.643953] vgaarb: bridge control possible 0000:0b:00.0
<4>[    0.644063] i2c-core: driver [aat2870] using legacy suspend method
<4>[    0.644065] i2c-core: driver [aat2870] using legacy resume method
<5>[    0.644147] SCSI subsystem initialized
<7>[    0.644177] libata version 3.00 loaded.
<6>[    0.644177] usbcore: registered new interface driver usbfs
<6>[    0.644177] usbcore: registered new interface driver hub
<6>[    0.644177] usbcore: registered new device driver usb
<6>[    0.644177] PCI: Using ACPI for IRQ routing
<7>[    0.647170] PCI: pci_cache_line_size set to 64 bytes
<7>[    0.647302] reserve RAM buffer: 000000000009bc00 - 000000000009ffff 
<7>[    0.647305] reserve RAM buffer: 00000000afde0000 - 00000000afffffff 
<6>[    0.647416] NetLabel: Initializing
<6>[    0.647418] NetLabel:  domain hash size = 128
<6>[    0.647419] NetLabel:  protocols = UNLABELED CIPSOv4
<6>[    0.647432] NetLabel:  unlabeled traffic allowed by default
<6>[    0.647452] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
<6>[    0.647452] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
<6>[    0.647452] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
<6>[    0.658075] Switching to clocksource hpet
<6>[    0.665480] AppArmor: AppArmor Filesystem Enabled
<6>[    0.665524] pnp: PnP ACPI init
<6>[    0.665544] ACPI: bus type pnp registered
<7>[    0.665655] pnp 00:00: [mem 0xffc00000-0xffffffff]
<7>[    0.665658] pnp 00:00: [mem 0xfec00000-0xfec00fff]
<7>[    0.665660] pnp 00:00: [mem 0xfee00000-0xfeefffff]
<7>[    0.665662] pnp 00:00: [mem 0xfed00000-0xfed00fff]
<6>[    0.665772] system 00:00: [mem 0xffc00000-0xffffffff] could not be reserved
<6>[    0.665775] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
<6>[    0.665778] system 00:00: [mem 0xfee00000-0xfeefffff] could not be reserved
<6>[    0.665780] system 00:00: [mem 0xfed00000-0xfed00fff] has been reserved
<7>[    0.665785] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
<7>[    0.665886] pnp 00:01: [bus 00-7f]
<7>[    0.665888] pnp 00:01: [io  0x0cf8-0x0cff]
<7>[    0.665891] pnp 00:01: [io  0x0000-0x03af window]
<7>[    0.665893] pnp 00:01: [io  0x03b0-0x03df window]
<7>[    0.665895] pnp 00:01: [io  0x03e0-0x0cf7 window]
<7>[    0.665897] pnp 00:01: [io  0x0d00-0x4fff window]
<7>[    0.665899] pnp 00:01: [mem 0x000a0000-0x000bffff window]
<7>[    0.665902] pnp 00:01: [mem 0x000c0000-0x000dffff window]
<7>[    0.665904] pnp 00:01: [mem 0xb0000000-0xc7ffffff window]
<7>[    0.666044] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
<7>[    0.666135] pnp 00:02: [irq 0 disabled]
<7>[    0.666150] pnp 00:02: [irq 8]
<7>[    0.666152] pnp 00:02: [mem 0xfed00000-0xfed003ff]
<7>[    0.666182] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
<7>[    0.666217] pnp 00:03: [mem 0xb8040000-0xb8047fff]
<6>[    0.666274] system 00:03: [mem 0xb8040000-0xb8047fff] has been reserved
<7>[    0.666277] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
<7>[    0.666443] pnp 00:04: [io  0x1000-0x107f]
<7>[    0.666445] pnp 00:04: [io  0x1080-0x10ff]
<7>[    0.666449] pnp 00:04: [io  0x1400-0x147f]
<7>[    0.666451] pnp 00:04: [io  0x1480-0x14ff]
<7>[    0.666453] pnp 00:04: [io  0x1800-0x187f]
<7>[    0.666455] pnp 00:04: [io  0x1880-0x18ff]
<7>[    0.666457] pnp 00:04: [io  0x2440-0x247f]
<7>[    0.666458] pnp 00:04: [io  0x2400-0x243f]
<6>[    0.666524] system 00:04: [io  0x1000-0x107f] has been reserved
<6>[    0.666527] system 00:04: [io  0x1080-0x10ff] has been reserved
<6>[    0.666529] system 00:04: [io  0x1400-0x147f] has been reserved
<6>[    0.666532] system 00:04: [io  0x1480-0x14ff] has been reserved
<6>[    0.666534] system 00:04: [io  0x1800-0x187f] has been reserved
<6>[    0.666537] system 00:04: [io  0x1880-0x18ff] has been reserved
<6>[    0.666539] system 00:04: [io  0x2440-0x247f] has been reserved
<6>[    0.666542] system 00:04: [io  0x2400-0x243f] has been reserved
<7>[    0.666545] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
<7>[    0.666554] pnp 00:05: [io  0x0060]
<7>[    0.666556] pnp 00:05: [io  0x0064]
<7>[    0.666563] pnp 00:05: [irq 1]
<7>[    0.666601] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
<7>[    0.666615] pnp 00:06: [irq 12]
<7>[    0.666652] pnp 00:06: Plug and Play ACPI device, IDs PNP0f13 (active)
<7>[    0.666663] pnp 00:07: [io  0x0010-0x001f]
<7>[    0.666665] pnp 00:07: [io  0x0022-0x003f]
<7>[    0.666667] pnp 00:07: [io  0x0044-0x005f]
<7>[    0.666669] pnp 00:07: [io  0x0062-0x0063]
<7>[    0.666671] pnp 00:07: [io  0x0065-0x006f]
<7>[    0.666672] pnp 00:07: [io  0x0072-0x0073]
<7>[    0.666674] pnp 00:07: [io  0x0074-0x007f]
<7>[    0.666676] pnp 00:07: [io  0x0091-0x0093]
<7>[    0.666678] pnp 00:07: [io  0x0097-0x009f]
<7>[    0.666680] pnp 00:07: [io  0x00a2-0x00bf]
<7>[    0.666682] pnp 00:07: [io  0x00e0-0x00ef]
<7>[    0.666683] pnp 00:07: [io  0x04d0-0x04d1]
<7>[    0.666685] pnp 00:07: [io  0x0080]
<7>[    0.666687] pnp 00:07: [io  0x0600-0x06fe]
<7>[    0.666689] pnp 00:07: [io  0x0c05-0x0c06]
<6>[    0.666762] system 00:07: [io  0x04d0-0x04d1] has been reserved
<6>[    0.666765] system 00:07: [io  0x0600-0x06fe] has been reserved
<6>[    0.666767] system 00:07: [io  0x0c05-0x0c06] has been reserved
<7>[    0.666770] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
<7>[    0.666784] pnp 00:08: [io  0x0000-0x0008]
<7>[    0.666786] pnp 00:08: [io  0x000a-0x000f]
<7>[    0.666787] pnp 00:08: [io  0x0081-0x0083]
<7>[    0.666789] pnp 00:08: [io  0x0087]
<7>[    0.666791] pnp 00:08: [io  0x0089-0x008b]
<7>[    0.666793] pnp 00:08: [io  0x008f]
<7>[    0.666794] pnp 00:08: [io  0x00c0-0x00d1]
<7>[    0.666796] pnp 00:08: [io  0x00d4-0x00df]
<7>[    0.666799] pnp 00:08: [dma 4]
<7>[    0.666829] pnp 00:08: Plug and Play ACPI device, IDs PNP0200 (active)
<7>[    0.666837] pnp 00:09: [io  0x0061]
<7>[    0.666868] pnp 00:09: Plug and Play ACPI device, IDs PNP0800 (active)
<7>[    0.666889] pnp 00:0a: [io  0x0070-0x0071]
<7>[    0.666922] pnp 00:0a: Plug and Play ACPI device, IDs PNP0b00 (active)
<7>[    0.666931] pnp 00:0b: [io  0x00f0-0x00f1]
<7>[    0.666938] pnp 00:0b: [irq 13]
<7>[    0.666968] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c04 (active)
<7>[    0.667130] pnp 00:0c: [io  0x03f8-0x03ff]
<7>[    0.667137] pnp 00:0c: [irq 4]
<7>[    0.667205] pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active)
<7>[    0.667333] pnp 00:0d: [io  0x02f8-0x02ff]
<7>[    0.667341] pnp 00:0d: [irq 3]
<7>[    0.667401] pnp 00:0d: Plug and Play ACPI device, IDs PNP0501 (active)
<7>[    0.667566] pnp 00:0e: [io  0x03f0-0x03f5]
<7>[    0.667568] pnp 00:0e: [io  0x03f7]
<7>[    0.667575] pnp 00:0e: [irq 6]
<7>[    0.667577] pnp 00:0e: [dma 2]
<7>[    0.667627] pnp 00:0e: Plug and Play ACPI device, IDs PNP0700 (active)
<7>[    0.667924] pnp 00:0f: [bus 80-ff]
<7>[    0.667926] pnp 00:0f: [io  0x0cf8-0x0cff]
<7>[    0.667928] pnp 00:0f: [io  0x5000-0xffff window]
<7>[    0.667930] pnp 00:0f: [io  0x03b0-0x03df window]
<7>[    0.667933] pnp 00:0f: [mem 0x000a0000-0x000bffff window]
<7>[    0.667935] pnp 00:0f: [mem 0x000c0000-0x000dffff window]
<7>[    0.667937] pnp 00:0f: [mem 0xc8000000-0xcfffffff window]
<7>[    0.667990] pnp 00:0f: Plug and Play ACPI device, IDs PNP0a03 (active)
<7>[    0.668041] pnp 00:10: [mem 0xc8040000-0xc8047fff]
<6>[    0.668112] system 00:10: [mem 0xc8040000-0xc8047fff] has been reserved
<7>[    0.668115] system 00:10: Plug and Play ACPI device, IDs PNP0c02 (active)
<7>[    0.668233] pnp 00:11: [io  0xf000-0xf07f]
<7>[    0.668235] pnp 00:11: [io  0xf080-0xf0ff]
<7>[    0.668237] pnp 00:11: [io  0xf400-0xf47f]
<7>[    0.668239] pnp 00:11: [io  0xf480-0xf4ff]
<7>[    0.668241] pnp 00:11: [io  0xf800-0xf87f]
<7>[    0.668242] pnp 00:11: [io  0xf880-0xf8ff]
<6>[    0.668315] system 00:11: [io  0xf000-0xf07f] has been reserved
<6>[    0.668318] system 00:11: [io  0xf080-0xf0ff] has been reserved
<6>[    0.668320] system 00:11: [io  0xf400-0xf47f] has been reserved
<6>[    0.668323] system 00:11: [io  0xf480-0xf4ff] has been reserved
<6>[    0.668325] system 00:11: [io  0xf800-0xf87f] has been reserved
<6>[    0.668328] system 00:11: [io  0xf880-0xf8ff] has been reserved
<7>[    0.668331] system 00:11: Plug and Play ACPI device, IDs PNP0c02 (active)
<6>[    0.668552] pnp: PnP ACPI: found 18 devices
<6>[    0.668554] ACPI: ACPI bus type pnp unregistered
<7>[    0.675952] PCI: max bus depth: 3 pci_try_num: 4
<6>[    0.676046] pci 0000:00:0a.0: BAR 15: assigned [mem 0xb0000000-0xb00fffff pref]
<6>[    0.676050] pci 0000:00:06.0: PCI bridge to [bus 01-01]
<6>[    0.676054] pci 0000:00:06.0:   bridge window [mem 0xb8100000-0xb81fffff]
<6>[    0.676060] pci 0000:02:00.0: BAR 15: assigned [mem 0xb0000000-0xb00fffff pref]
<6>[    0.676064] pci 0000:03:05.0: BAR 15: assigned [mem 0xb0000000-0xb00fffff pref]
<6>[    0.676067] pci 0000:03:01.0: PCI bridge to [bus 04-04]
<6>[    0.676071] pci 0000:03:01.0:   bridge window [mem 0xb8300000-0xb83fffff]
<6>[    0.676080] pci 0000:05:00.0: BAR 6: assigned [mem 0xb0000000-0xb000ffff pref]
<6>[    0.676082] pci 0000:03:05.0: PCI bridge to [bus 05-05]
<6>[    0.676085] pci 0000:03:05.0:   bridge window [io  0x3000-0x3fff]
<6>[    0.676090] pci 0000:03:05.0:   bridge window [mem 0xb8400000-0xb84fffff]
<6>[    0.676094] pci 0000:03:05.0:   bridge window [mem 0xb0000000-0xb00fffff pref]
<6>[    0.676100] pci 0000:03:07.0: PCI bridge to [bus 06-06]
<6>[    0.676109] pci 0000:03:09.0: PCI bridge to [bus 07-07]
<6>[    0.676119] pci 0000:02:00.0: PCI bridge to [bus 03-07]
<6>[    0.676122] pci 0000:02:00.0:   bridge window [io  0x3000-0x3fff]
<6>[    0.676126] pci 0000:02:00.0:   bridge window [mem 0xb8300000-0xb84fffff]
<6>[    0.676130] pci 0000:02:00.0:   bridge window [mem 0xb0000000-0xb00fffff pref]
<6>[    0.676136] pci 0000:00:0a.0: PCI bridge to [bus 02-07]
<6>[    0.676138] pci 0000:00:0a.0:   bridge window [io  0x3000-0x3fff]
<6>[    0.676141] pci 0000:00:0a.0:   bridge window [mem 0xb8200000-0xb84fffff]
<6>[    0.676145] pci 0000:00:0a.0:   bridge window [mem 0xb0000000-0xb00fffff pref]
<6>[    0.676149] pci 0000:08:00.0: PCI bridge to [bus 09-09]
<6>[    0.676159] pci 0000:08:00.1: PCI bridge to [bus 0a-0a]
<6>[    0.676173] pci 0000:00:0d.0: PCI bridge to [bus 08-0a]
<6>[    0.676176] pci 0000:00:0d.0:   bridge window [mem 0xb8500000-0xb85fffff]
<6>[    0.676182] pci 0000:0b:00.0: BAR 6: assigned [mem 0xb8620000-0xb863ffff pref]
<6>[    0.676185] pci 0000:00:0f.0: PCI bridge to [bus 0b-0b]
<6>[    0.676187] pci 0000:00:0f.0:   bridge window [io  0x4000-0x4fff]
<6>[    0.676191] pci 0000:00:0f.0:   bridge window [mem 0xb8600000-0xb86fffff]
<6>[    0.676194] pci 0000:00:0f.0:   bridge window [mem 0xc0000000-0xc7ffffff 64bit pref]
<6>[    0.676200] pci 0000:80:0a.0: PCI bridge to [bus 81-81]
<6>[    0.676206] pci 0000:80:0d.0: PCI bridge to [bus 82-82]
<6>[    0.676212] pci 0000:80:0f.0: PCI bridge to [bus 83-83]
<7>[    0.676225] pci 0000:00:06.0: setting latency timer to 64
<7>[    0.676231] pci 0000:00:0a.0: setting latency timer to 64
<4>[    0.676365] ACPI: PCI Interrupt Link [LK3E] enabled at IRQ 23
<6>[    0.676382] pci 0000:02:00.0: PCI INT A -> Link[LK3E] -> GSI 23 (level, low) -> IRQ 23
<7>[    0.676386] pci 0000:02:00.0: setting latency timer to 64
<4>[    0.676493] ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 22
<6>[    0.676504] pci 0000:03:01.0: PCI INT A -> Link[LK4E] -> GSI 22 (level, low) -> IRQ 22
<7>[    0.676508] pci 0000:03:01.0: setting latency timer to 64
<6>[    0.676516] pci 0000:03:05.0: PCI INT A -> Link[LK4E] -> GSI 22 (level, low) -> IRQ 22
<7>[    0.676520] pci 0000:03:05.0: setting latency timer to 64
<4>[    0.676622] ACPI: PCI Interrupt Link [LK2E] enabled at IRQ 21
<6>[    0.676635] pci 0000:03:07.0: PCI INT A -> Link[LK2E] -> GSI 21 (level, low) -> IRQ 21
<7>[    0.676639] pci 0000:03:07.0: setting latency timer to 64
<6>[    0.676646] pci 0000:03:09.0: PCI INT A -> Link[LK4E] -> GSI 22 (level, low) -> IRQ 22
<7>[    0.676650] pci 0000:03:09.0: setting latency timer to 64
<7>[    0.676655] pci 0000:00:0d.0: setting latency timer to 64
<7>[    0.676662] pci 0000:08:00.0: setting latency timer to 64
<6>[    0.676669] pci 0000:08:00.1: PCI INT A -> Link[LK4E] -> GSI 22 (level, low) -> IRQ 22
<7>[    0.676674] pci 0000:08:00.1: setting latency timer to 64
<7>[    0.676680] pci 0000:00:0f.0: setting latency timer to 64
<7>[    0.676685] pci 0000:80:0a.0: setting latency timer to 64
<7>[    0.676690] pci 0000:80:0d.0: setting latency timer to 64
<7>[    0.676695] pci 0000:80:0f.0: setting latency timer to 64
<7>[    0.676699] pci_bus 0000:00: resource 4 [io  0x0000-0x03af]
<7>[    0.676701] pci_bus 0000:00: resource 5 [io  0x03b0-0x03df]
<7>[    0.676704] pci_bus 0000:00: resource 6 [io  0x03e0-0x0cf7]
<7>[    0.676706] pci_bus 0000:00: resource 7 [io  0x0d00-0x4fff]
<7>[    0.676708] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
<7>[    0.676710] pci_bus 0000:00: resource 9 [mem 0xb0000000-0xc7ffffff]
<7>[    0.676713] pci_bus 0000:01: resource 1 [mem 0xb8100000-0xb81fffff]
<7>[    0.676716] pci_bus 0000:01: resource 4 [io  0x0000-0x03af]
<7>[    0.676718] pci_bus 0000:01: resource 5 [io  0x03b0-0x03df]
<7>[    0.676721] pci_bus 0000:01: resource 6 [io  0x03e0-0x0cf7]
<7>[    0.676723] pci_bus 0000:01: resource 7 [io  0x0d00-0x4fff]
<7>[    0.676725] pci_bus 0000:01: resource 8 [mem 0x000a0000-0x000bffff]
<7>[    0.676728] pci_bus 0000:01: resource 9 [mem 0xb0000000-0xc7ffffff]
<7>[    0.676731] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
<7>[    0.676733] pci_bus 0000:02: resource 1 [mem 0xb8200000-0xb84fffff]
<7>[    0.676736] pci_bus 0000:02: resource 2 [mem 0xb0000000-0xb00fffff pref]
<7>[    0.676739] pci_bus 0000:03: resource 0 [io  0x3000-0x3fff]
<7>[    0.676741] pci_bus 0000:03: resource 1 [mem 0xb8300000-0xb84fffff]
<7>[    0.676743] pci_bus 0000:03: resource 2 [mem 0xb0000000-0xb00fffff pref]
<7>[    0.676746] pci_bus 0000:04: resource 1 [mem 0xb8300000-0xb83fffff]
<7>[    0.676749] pci_bus 0000:05: resource 0 [io  0x3000-0x3fff]
<7>[    0.676751] pci_bus 0000:05: resource 1 [mem 0xb8400000-0xb84fffff]
<7>[    0.676753] pci_bus 0000:05: resource 2 [mem 0xb0000000-0xb00fffff pref]
<7>[    0.676756] pci_bus 0000:08: resource 1 [mem 0xb8500000-0xb85fffff]
<7>[    0.676759] pci_bus 0000:0b: resource 0 [io  0x4000-0x4fff]
<7>[    0.676761] pci_bus 0000:0b: resource 1 [mem 0xb8600000-0xb86fffff]
<7>[    0.676764] pci_bus 0000:0b: resource 2 [mem 0xc0000000-0xc7ffffff 64bit pref]
<7>[    0.676767] pci_bus 0000:80: resource 4 [io  0x5000-0xffff]
<7>[    0.676769] pci_bus 0000:80: resource 5 [io  0x03b0-0x03df]
<7>[    0.676772] pci_bus 0000:80: resource 6 [mem 0x000a0000-0x000bffff]
<7>[    0.676774] pci_bus 0000:80: resource 7 [mem 0xc8000000-0xcfffffff]
<6>[    0.676830] NET: Registered protocol family 2
<6>[    0.677079] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
<6>[    0.678582] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
<6>[    0.682056] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
<6>[    0.682477] TCP: Hash tables configured (established 524288 bind 65536)
<6>[    0.682479] TCP reno registered
<6>[    0.682495] UDP hash table entries: 4096 (order: 5, 131072 bytes)
<6>[    0.682566] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
<6>[    0.682761] NET: Registered protocol family 1
<4>[    0.682991] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 20
<6>[    0.683032] pci 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 20 (level, low) -> IRQ 20
<6>[    0.936059] pci 0000:00:02.0: PCI INT A disabled
<4>[    0.936252] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 19
<6>[    0.936290] pci 0000:00:02.1: PCI INT B -> Link[LUS2] -> GSI 19 (level, low) -> IRQ 19
<6>[    0.936336] pci 0000:00:02.1: PCI INT B disabled
<6>[    0.936439] pci 0000:00:00.0: Found enabled HT MSI Mapping
<6>[    0.936560] pci 0000:00:00.0: Found enabled HT MSI Mapping
<6>[    0.936637] pci 0000:00:00.0: Found enabled HT MSI Mapping
<6>[    0.936720] pci 0000:00:00.0: Found enabled HT MSI Mapping
<6>[    0.936768] pci 0000:04:00.0: PCI INT A -> Link[LK4E] -> GSI 22 (level, low) -> IRQ 22
<6>[    0.936815] pci 0000:04:00.0: PCI INT A disabled
<7>[    0.936829] pci 0000:0b:00.0: Boot video device
<6>[    0.936917] pci 0000:80:00.0: Found enabled HT MSI Mapping
<6>[    0.936973] pci 0000:80:00.0: Found enabled HT MSI Mapping
<6>[    0.937056] pci 0000:80:00.0: Found enabled HT MSI Mapping
<7>[    0.937059] PCI: CLS 64 bytes, default 64
<6>[    0.938238] PCI-DMA: Disabling AGP.
<6>[    0.941618] PCI-DMA: aperture base @ b4000000 size 65536 KB
<6>[    0.941620] init_memory_mapping: 00000000b4000000-00000000b8000000
<7>[    0.941624]  00b4000000 - 00b8000000 page 2M
<6>[    0.941630] PCI-DMA: using GART IOMMU.
<6>[    0.941634] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
<6>[    0.946061] Simple Boot Flag at 0x37 set to 0x80
<6>[    0.946728] IBS: LVT offset 1 assigned
<6>[    0.946763] perf: AMD IBS detected (0x00000007)
<6>[    0.946958] audit: initializing netlink socket (disabled)
<5>[    0.946984] type=2000 audit(1367124760.945:1): initialized
<6>[    0.964983] HugeTLB registered 2 MB page size, pre-allocated 0 pages
<5>[    0.968100] VFS: Disk quotas dquot_6.5.2
<4>[    0.968163] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
<6>[    0.968742] fuse init (API version 7.17)
<6>[    0.968840] msgmni has been set to 16047
<6>[    0.969379] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
<6>[    0.969422] io scheduler noop registered
<6>[    0.969424] io scheduler deadline registered
<6>[    0.969457] io scheduler cfq registered (default)
<7>[    0.969636] pcieport 0000:00:0a.0: setting latency timer to 64
<7>[    0.969671] pcieport 0000:00:0a.0: irq 64 for MSI/MSI-X
<7>[    0.969755] pcieport 0000:00:0d.0: setting latency timer to 64
<7>[    0.969779] pcieport 0000:00:0d.0: irq 65 for MSI/MSI-X
<7>[    0.969842] pcieport 0000:00:0f.0: setting latency timer to 64
<7>[    0.969867] pcieport 0000:00:0f.0: irq 66 for MSI/MSI-X
<7>[    0.969933] pcieport 0000:02:00.0: setting latency timer to 64
<7>[    0.969976] pcieport 0000:02:00.0: irq 67 for MSI/MSI-X
<7>[    0.970072] pcieport 0000:03:01.0: setting latency timer to 64
<7>[    0.970111] pcieport 0000:03:01.0: irq 68 for MSI/MSI-X
<7>[    0.970192] pcieport 0000:03:05.0: setting latency timer to 64
<7>[    0.970228] pcieport 0000:03:05.0: irq 69 for MSI/MSI-X
<7>[    0.970308] pcieport 0000:03:07.0: setting latency timer to 64
<7>[    0.970346] pcieport 0000:03:07.0: irq 70 for MSI/MSI-X
<7>[    0.970424] pcieport 0000:03:09.0: setting latency timer to 64
<7>[    0.970461] pcieport 0000:03:09.0: irq 71 for MSI/MSI-X
<7>[    0.970603] pcieport 0000:80:0a.0: setting latency timer to 64
<7>[    0.970658] pcieport 0000:80:0a.0: irq 72 for MSI/MSI-X
<7>[    0.970772] pcieport 0000:80:0d.0: setting latency timer to 64
<7>[    0.970797] pcieport 0000:80:0d.0: irq 73 for MSI/MSI-X
<7>[    0.970868] pcieport 0000:80:0f.0: setting latency timer to 64
<7>[    0.970893] pcieport 0000:80:0f.0: irq 74 for MSI/MSI-X
<6>[    0.970976] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
<6>[    0.970997] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
<6>[    0.971192] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
<6>[    0.971199] ACPI: Power Button [PWRB]
<6>[    0.971258] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
<6>[    0.971261] ACPI: Power Button [PWRF]
<6>[    0.973213] ERST: Table is not found!
<6>[    0.973214] GHES: HEST is not enabled!
<6>[    0.973301] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
<6>[    0.993869] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>[    1.031564] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
<6>[    1.215028] Freeing initrd memory: 21460k freed
<6>[    1.408745] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>[    1.437666] 00:0d: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
<6>[    1.446410] Linux agpgart interface v0.103
<6>[    1.448151] brd: module loaded
<6>[    1.449049] loop: module loaded
<7>[    1.449247] ahci 0000:05:00.0: version 3.0
<6>[    1.449263] ahci 0000:05:00.0: PCI INT A -> Link[LK4E] -> GSI 22 (level, low) -> IRQ 22
<7>[    1.449398] ahci 0000:05:00.0: irq 75 for MSI/MSI-X
<6>[    1.449457] ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
<6>[    1.449461] ahci 0000:05:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs 
<7>[    1.449466] ahci 0000:05:00.0: setting latency timer to 64
<6>[    1.449888] scsi0 : ahci
<6>[    1.449980] scsi1 : ahci
<6>[    1.450039] ata1: SATA max UDMA/133 abar m2048@0xb8400000 port 0xb8400100 irq 75
<6>[    1.450042] ata2: SATA max UDMA/133 abar m2048@0xb8400000 port 0xb8400180 irq 75
<7>[    1.450181] pata_acpi 0000:00:04.0: setting latency timer to 64
<4>[    1.450373] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 18
<6>[    1.450394] pata_acpi 0000:00:05.0: PCI INT A -> Link[LTID] -> GSI 18 (level, low) -> IRQ 18
<7>[    1.450407] pata_acpi 0000:00:05.0: setting latency timer to 64
<6>[    1.450413] pata_acpi 0000:00:05.0: PCI INT A disabled
<4>[    1.450574] ACPI: PCI Interrupt Link [LSI1] enabled at IRQ 17
<6>[    1.450585] pata_acpi 0000:00:05.1: PCI INT B -> Link[LSI1] -> GSI 17 (level, low) -> IRQ 17
<7>[    1.450597] pata_acpi 0000:00:05.1: setting latency timer to 64
<6>[    1.450603] pata_acpi 0000:00:05.1: PCI INT B disabled
<4>[    1.450756] ACPI: PCI Interrupt Link [LSI2] enabled at IRQ 16
<6>[    1.450768] pata_acpi 0000:00:05.2: PCI INT C -> Link[LSI2] -> GSI 16 (level, low) -> IRQ 16
<7>[    1.450781] pata_acpi 0000:00:05.2: setting latency timer to 64
<6>[    1.450793] pata_acpi 0000:00:05.2: PCI INT C disabled
<6>[    1.451201] Fixed MDIO Bus: probed
<6>[    1.451219] tun: Universal TUN/TAP device driver, 1.6
<6>[    1.451221] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
<6>[    1.451278] PPP generic driver version 2.4.2
<6>[    1.451401] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[    1.451423] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUS2] -> GSI 19 (level, low) -> IRQ 19
<7>[    1.451436] ehci_hcd 0000:00:02.1: setting latency timer to 64
<6>[    1.451439] ehci_hcd 0000:00:02.1: EHCI Host Controller
<6>[    1.451502] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
<6>[    1.451528] ehci_hcd 0000:00:02.1: debug port 1
<7>[    1.451535] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
<6>[    1.451588] ehci_hcd 0000:00:02.1: irq 19, io mem 0xb8005000
<6>[    1.457025] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
<6>[    1.457208] hub 1-0:1.0: USB hub found
<6>[    1.457212] hub 1-0:1.0: 10 ports detected
<6>[    1.457339] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<6>[    1.457361] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 20 (level, low) -> IRQ 20
<7>[    1.457372] ohci_hcd 0000:00:02.0: setting latency timer to 64
<6>[    1.457378] ohci_hcd 0000:00:02.0: OHCI Host Controller
<6>[    1.457424] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
<6>[    1.457489] ohci_hcd 0000:00:02.0: irq 20, io mem 0xb8004000
<6>[    1.510148] hub 2-0:1.0: USB hub found
<6>[    1.510154] hub 2-0:1.0: 10 ports detected
<6>[    1.510267] uhci_hcd: USB Universal Host Controller Interface driver
<6>[    1.510315] xhci_hcd 0000:04:00.0: PCI INT A -> Link[LK4E] -> GSI 22 (level, low) -> IRQ 22
<7>[    1.510327] xhci_hcd 0000:04:00.0: setting latency timer to 64
<6>[    1.510346] xhci_hcd 0000:04:00.0: xHCI Host Controller
<6>[    1.510396] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
<6>[    1.510607] xhci_hcd 0000:04:00.0: irq 22, io mem 0xb8300000
<7>[    1.510733] xhci_hcd 0000:04:00.0: irq 76 for MSI/MSI-X
<7>[    1.510741] xhci_hcd 0000:04:00.0: irq 77 for MSI/MSI-X
<7>[    1.510747] xhci_hcd 0000:04:00.0: irq 78 for MSI/MSI-X
<7>[    1.510754] xhci_hcd 0000:04:00.0: irq 79 for MSI/MSI-X
<7>[    1.510760] xhci_hcd 0000:04:00.0: irq 80 for MSI/MSI-X
<7>[    1.510765] xhci_hcd 0000:04:00.0: irq 81 for MSI/MSI-X
<7>[    1.510769] xhci_hcd 0000:04:00.0: irq 82 for MSI/MSI-X
<7>[    1.510774] xhci_hcd 0000:04:00.0: irq 83 for MSI/MSI-X
<7>[    1.511258] xHCI xhci_add_endpoint called for root hub
<7>[    1.511261] xHCI xhci_check_bandwidth called for root hub
<6>[    1.511289] hub 3-0:1.0: USB hub found
<6>[    1.511296] hub 3-0:1.0: 2 ports detected
<6>[    1.511370] xhci_hcd 0000:04:00.0: xHCI Host Controller
<6>[    1.511417] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
<7>[    1.513968] xHCI xhci_add_endpoint called for root hub
<7>[    1.513970] xHCI xhci_check_bandwidth called for root hub
<6>[    1.513992] hub 4-0:1.0: USB hub found
<6>[    1.513999] hub 4-0:1.0: 2 ports detected
<6>[    1.536075] usbcore: registered new interface driver libusual
<6>[    1.536124] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
<6>[    1.539436] serio: i8042 KBD port at 0x60,0x64 irq 1
<6>[    1.539455] serio: i8042 AUX port at 0x60,0x64 irq 12
<6>[    1.539644] mousedev: PS/2 mouse device common for all mice
<6>[    1.539836] rtc_cmos 00:0a: RTC can wake from S4
<6>[    1.540050] rtc_cmos 00:0a: rtc core: registered rtc_cmos as rtc0
<6>[    1.540127] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
<6>[    1.540238] device-mapper: uevent: version 1.0.3
<6>[    1.540316] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
<6>[    1.540328] cpuidle: using governor ladder
<6>[    1.540330] cpuidle: using governor menu
<6>[    1.540332] EFI Variables Facility v0.08 2004-May-17
<6>[    1.540720] TCP cubic registered
<6>[    1.540836] NET: Registered protocol family 10
<6>[    1.541430] NET: Registered protocol family 17
<5>[    1.541435] Registering the dns_resolver key type
<7>[    1.541590] PM: Hibernation image not present or could not be loaded.
<6>[    1.541604] registered taskstats version 1
<6>[    1.550755]   Magic number: 9:851:869
<6>[    1.550947] rtc_cmos 00:0a: setting system clock to 2013-04-28 04:52:42 UTC (1367124762)
<6>[    1.550981] powernow-k8: Found 2 Quad-Core AMD Opteron(tm) Processor 2356 (8 cpu cores) (version 2.20.00)
<6>[    1.551069] powernow-k8:    0 : pstate 0 (2300 MHz)
<6>[    1.551071] powernow-k8:    1 : pstate 1 (2000 MHz)
<6>[    1.551072] powernow-k8:    2 : pstate 2 (1700 MHz)
<6>[    1.551074] powernow-k8:    3 : pstate 3 (1400 MHz)
<6>[    1.551076] powernow-k8:    4 : pstate 4 (1150 MHz)
<6>[    1.551458] powernow-k8:    0 : pstate 0 (2300 MHz)
<6>[    1.551460] powernow-k8:    1 : pstate 1 (2000 MHz)
<6>[    1.551462] powernow-k8:    2 : pstate 2 (1700 MHz)
<6>[    1.551464] powernow-k8:    3 : pstate 3 (1400 MHz)
<6>[    1.551465] powernow-k8:    4 : pstate 4 (1150 MHz)
<6>[    1.551800] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
<6>[    1.551802] EDD information not available.
<6>[    1.560867] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
<6>[    1.755076] ata2: SATA link down (SStatus 0 SControl 330)
<6>[    1.810060] usb 1-7: new high-speed USB device number 3 using ehci_hcd
<6>[    1.910053] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
<6>[    1.922022] ata1.00: ATA-8: KINGSTON SVP200S37A60G, 502ABBF0, max UDMA/133
<6>[    1.922026] ata1.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
<6>[    1.931924] ata1.00: configured for UDMA/133
<5>[    1.932121] scsi 0:0:0:0: Direct-Access     ATA      KINGSTON SVP200S 502A PQ: 0 ANSI: 5
<5>[    1.932282] sd 0:0:0:0: Attached scsi generic sg0 type 0
<5>[    1.932349] sd 0:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
<5>[    1.932577] sd 0:0:0:0: [sda] Write Protect is off
<7>[    1.932580] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>[    1.932629] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6>[    1.933549]  sda: sda1 sda4
<5>[    1.933976] sd 0:0:0:0: [sda] Attached SCSI disk
<6>[    1.935465] Freeing unused kernel memory: 868k freed
<6>[    1.935768] Write protecting the kernel read-only data: 12288k
<6>[    1.941145] Freeing unused kernel memory: 1540k freed
<6>[    1.945791] Freeing unused kernel memory: 1212k freed
<6>[    1.948040] Refined TSC clocksource calibration: 2299.999 MHz.
<6>[    1.948046] Switching to clocksource tsc
<30>[    1.966942] udevd[138]: starting version 175
<7>[    1.989999] pata_amd 0000:00:04.0: version 0.4.1
<7>[    1.990059] pata_amd 0000:00:04.0: setting latency timer to 64
<6>[    1.996340] scsi2 : pata_amd
<6>[    1.996432] scsi3 : pata_amd
<6>[    1.996867] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x2480 irq 14
<6>[    1.996871] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x2488 irq 15
<6>[    1.996992] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
<4>[    1.997160] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
<6>[    1.997168] forcedeth 0000:00:08.0: PCI INT A -> Link[LMAC] -> GSI 23 (level, low) -> IRQ 23
<7>[    1.997175] forcedeth 0000:00:08.0: setting latency timer to 64
<6>[    2.011259] Floppy drive(s): fd0 is 1.44M
<6>[    2.025887] FDC 0 is a post-1991 82077
<6>[    2.151331] ata3.00: ATAPI: HL-DT-ST DVDRAM GSA-H42N, RL00, max UDMA/66
<7>[    2.151342] ata3: nv_mode_filter: 0x1f39f&0x739f->0x739f, BIOS=0x7000 (0xc000c700) ACPI=0x701f (60:600:0x13)
<6>[    2.158238] ata3.00: configured for UDMA/33
<5>[    2.164812] scsi 2:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-H42N  RL00 PQ: 0 ANSI: 5
<4>[    2.170522] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
<6>[    2.170526] cdrom: Uniform CD-ROM driver Revision: 3.20
<7>[    2.170669] sr 2:0:0:0: Attached scsi CD-ROM sr0
<5>[    2.170765] sr 2:0:0:0: Attached scsi generic sg1 type 5
<7>[    2.170896] ata4: port disabled--ignoring
<4>[    2.172968] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 22
<6>[    2.172976] firewire_ohci 0000:01:05.0: PCI INT A -> Link[LNK1] -> GSI 22 (level, low) -> IRQ 22
<6>[    2.174187] [drm] Initialized drm 1.1.0 20060810
<6>[    2.181278] [drm] radeon defaulting to kernel modesetting.
<6>[    2.181282] [drm] radeon kernel modesetting enabled.
<6>[    2.181440] radeon 0000:0b:00.0: PCI INT A -> Link[LK2E] -> GSI 21 (level, low) -> IRQ 21
<7>[    2.181445] radeon 0000:0b:00.0: setting latency timer to 64
<6>[    2.181614] [drm] initializing kernel modesetting (RV380 0x1002:0x5B63 0x0001:0x0001).
<6>[    2.181644] [drm] register mmio base: 0xB8600000
<6>[    2.181646] [drm] register mmio size: 65536
<6>[    2.181770] [drm] Generation 2 PCI interface, using max accessible memory
<6>[    2.181775] radeon 0000:0b:00.0: VRAM: 128M 0x00000000C0000000 - 0x00000000C7FFFFFF (128M used)
<6>[    2.181778] radeon 0000:0b:00.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
<6>[    2.181784] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
<6>[    2.181786] [drm] Driver supports precise vblank timestamp query.
<7>[    2.181830] radeon 0000:0b:00.0: irq 84 for MSI/MSI-X
<6>[    2.181835] radeon 0000:0b:00.0: radeon: using MSI.
<6>[    2.181882] [drm] radeon: irq initialized.
<6>[    2.185921] [drm] Detected VRAM RAM=128M, BAR=128M
<6>[    2.185926] [drm] RAM width 64bits DDR
<6>[    2.186039] [TTM] Zone  kernel: Available graphics memory: 4120810 kiB.
<6>[    2.186041] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB.
<6>[    2.186044] [TTM] Initializing pool allocator.
<6>[    2.186091] [drm] radeon: 128M of VRAM memory ready
<6>[    2.186093] [drm] radeon: 512M of GTT memory ready.
<6>[    2.186120] [drm] GART: num cpu pages 131072, num gpu pages 131072
<6>[    2.186997] [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
<6>[    2.188017] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
<6>[    2.188041] radeon 0000:0b:00.0: WB enabled
<6>[    2.188117] [drm] Loading R300 Microcode
<6>[    2.190410] [drm] radeon: ring at 0x00000000A0001000
<6>[    2.190429] [drm] ring test succeeded in 1 usecs
<6>[    2.190531] [drm] radeon: ib pool ready.
<6>[    2.190587] [drm] ib test succeeded in 0 usecs
<6>[    2.190819] [drm] Radeon Display Connectors
<6>[    2.190821] [drm] Connector 0:
<6>[    2.190822] [drm]   VGA
<6>[    2.190824] [drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
<6>[    2.190826] [drm]   Encoders:
<6>[    2.190827] [drm]     CRT1: INTERNAL_DAC1
<6>[    2.190829] [drm] Connector 1:
<6>[    2.190830] [drm]   DVI-I
<6>[    2.190831] [drm]   HPD1
<6>[    2.190833] [drm]   DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
<6>[    2.190835] [drm]   Encoders:
<6>[    2.190836] [drm]     CRT2: INTERNAL_DAC2
<6>[    2.190838] [drm]     DFP1: INTERNAL_TMDS1
<6>[    2.190839] [drm] Connector 2:
<6>[    2.190840] [drm]   S-video
<6>[    2.190842] [drm]   Encoders:
<6>[    2.190843] [drm]     TV1: INTERNAL_DAC2
<5>[    2.224102] firewire_ohci: Added fw-ohci device 0000:01:05.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
<6>[    2.270066] [drm] fb mappable at 0xC00C0000
<6>[    2.270068] [drm] vram apper at 0xC0000000
<6>[    2.270069] [drm] size 8294400
<6>[    2.270070] [drm] fb depth is 24
<6>[    2.270072] [drm]    pitch is 7680
<6>[    2.270149] fbcon: radeondrmfb (fb0) is primary device
<6>[    2.270232] Console: switching to colour frame buffer device 240x67
<6>[    2.270271] fb0: radeondrmfb frame buffer device
<6>[    2.270273] drm: registered panic notifier
<6>[    2.270280] [drm] Initialized radeon 2.12.0 20080528 for 0000:0b:00.0 on minor 0
<6>[    2.520778] forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x5043 @ 0, addr 00:e0:81:b1:66:70
<6>[    2.520783] forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
<4>[    2.521030] ACPI: PCI Interrupt Link [LMA2] enabled at IRQ 21
<6>[    2.521035] forcedeth 0000:00:09.0: PCI INT A -> Link[LMA2] -> GSI 21 (level, low) -> IRQ 21
<7>[    2.521041] forcedeth 0000:00:09.0: setting latency timer to 64
<6>[    2.557040] usb 2-5: new low-speed USB device number 2 using ohci_hcd
<6>[    2.769353] input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:02.0/usb2/2-5/2-5:1.0/input/input3
<6>[    2.769477] generic-usb 0003:046D:C50E.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:02.0-5/input0
<6>[    2.769497] usbcore: registered new interface driver usbhid
<6>[    2.769499] usbhid: USB HID core driver
<5>[    2.771097] firewire_core: created device fw0: GUID 00e0810000283c52, S400
<6>[    3.017036] usb 2-8: new full-speed USB device number 3 using ohci_hcd
<6>[    3.042757] forcedeth 0000:00:09.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:e0:81:b1:66:71
<6>[    3.042761] forcedeth 0000:00:09.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
<7>[    3.042797] sata_nv 0000:00:05.0: version 3.5
<6>[    3.042806] sata_nv 0000:00:05.0: PCI INT A -> Link[LTID] -> GSI 18 (level, low) -> IRQ 18
<5>[    3.042809] sata_nv 0000:00:05.0: Using SWNCQ mode
<7>[    3.043011] sata_nv 0000:00:05.0: setting latency timer to 64
<6>[    3.043381] scsi4 : sata_nv
<6>[    3.043464] scsi5 : sata_nv
<6>[    3.043577] ata5: SATA max UDMA/133 cmd 0x24d0 ctl 0x24c4 bmdma 0x2490 irq 18
<6>[    3.043580] ata6: SATA max UDMA/133 cmd 0x24c8 ctl 0x24c0 bmdma 0x2498 irq 18
<6>[    3.043617] sata_nv 0000:00:05.1: PCI INT B -> Link[LSI1] -> GSI 17 (level, low) -> IRQ 17
<5>[    3.043620] sata_nv 0000:00:05.1: Using SWNCQ mode
<7>[    3.043800] sata_nv 0000:00:05.1: setting latency timer to 64
<6>[    3.044106] scsi6 : sata_nv
<6>[    3.044172] scsi7 : sata_nv
<6>[    3.044279] ata7: SATA max UDMA/133 cmd 0x24e8 ctl 0x24dc bmdma 0x24a0 irq 17
<6>[    3.044282] ata8: SATA max UDMA/133 cmd 0x24e0 ctl 0x24d8 bmdma 0x24a8 irq 17
<6>[    3.044313] sata_nv 0000:00:05.2: PCI INT C -> Link[LSI2] -> GSI 16 (level, low) -> IRQ 16
<5>[    3.044315] sata_nv 0000:00:05.2: Using SWNCQ mode
<7>[    3.044492] sata_nv 0000:00:05.2: setting latency timer to 64
<6>[    3.044793] scsi8 : sata_nv
<6>[    3.044859] scsi9 : sata_nv
<6>[    3.044965] ata9: SATA max UDMA/133 cmd 0x2800 ctl 0x24f4 bmdma 0x24b0 irq 16
<6>[    3.044968] ata10: SATA max UDMA/133 cmd 0x24f8 ctl 0x24f0 bmdma 0x24b8 irq 16
<6>[    3.216108] hub 2-8:1.0: USB hub found
<6>[    3.219071] hub 2-8:1.0: 4 ports detected
<6>[    3.346029] ata5: SATA link down (SStatus 0 SControl 300)
<6>[    3.498038] usb 2-9: new low-speed USB device number 4 using ohci_hcd
<6>[    3.498042] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>[    3.499049] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>[    3.501646] ata7.00: ATA-8: WDC WD5000AADS-00S9B0, 01.00A01, max UDMA/133
<6>[    3.501650] ata7.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
<6>[    3.503058] ata9.00: ATA-8: WDC WD5000AADS-00S9B0, 01.00A01, max UDMA/133
<6>[    3.503061] ata9.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
<6>[    3.504645] ata7.00: configured for UDMA/133
<6>[    3.507057] ata9.00: configured for UDMA/133
<6>[    3.719330] input: MOSART Semi. Wireless Keyboard & Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-9/2-9:1.0/input/input4
<6>[    3.719417] generic-usb 0003:062A:0102.0002: input,hidraw1: USB HID v1.10 Keyboard [MOSART Semi. Wireless Keyboard & Mouse] on usb-0000:00:02.0-9/input0
<6>[    3.730532] input: MOSART Semi. Wireless Keyboard & Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-9/2-9:1.1/input/input5
<6>[    3.730712] generic-usb 0003:062A:0102.0003: input,hiddev0,hidraw2: USB HID v1.10 Mouse [MOSART Semi. Wireless Keyboard & Mouse] on usb-0000:00:02.0-9/input1
<6>[    3.800049] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>[    3.803959] ata6.00: ATA-8: WDC WD5000AADS-00S9B0, 01.00A01, max UDMA/133
<6>[    3.803963] ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
<6>[    3.807966] ata6.00: configured for UDMA/133
<5>[    3.808144] scsi 5:0:0:0: Direct-Access     ATA      WDC WD5000AADS-0 01.0 PQ: 0 ANSI: 5
<5>[    3.808339] sd 5:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
<5>[    3.808344] sd 5:0:0:0: Attached scsi generic sg2 type 0
<5>[    3.808476] sd 5:0:0:0: [sdb] Write Protect is off
<7>[    3.808479] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
<5>[    3.808523] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<5>[    3.808576] scsi 6:0:0:0: Direct-Access     ATA      WDC WD5000AADS-0 01.0 PQ: 0 ANSI: 5
<5>[    3.808819] sd 6:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
<5>[    3.808832] sd 6:0:0:0: Attached scsi generic sg3 type 0
<5>[    3.808896] sd 6:0:0:0: [sdc] Write Protect is off
<7>[    3.808900] sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00
<5>[    3.808939] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6>[    3.822054]  sdc: sdc1
<5>[    3.822353] sd 6:0:0:0: [sdc] Attached SCSI disk
<6>[    3.825331]  sdb: sdb1
<5>[    3.825622] sd 5:0:0:0: [sdb] Attached SCSI disk
<6>[    3.954507] md: bind<sdc1>
<6>[    4.262061] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>[    4.265464] ata8.00: ATA-8: WDC WD5000AADS-00S9B0, 01.00A01, max UDMA/133
<6>[    4.265468] ata8.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
<6>[    4.268463] ata8.00: configured for UDMA/133
<5>[    4.268586] scsi 7:0:0:0: Direct-Access     ATA      WDC WD5000AADS-0 01.0 PQ: 0 ANSI: 5
<5>[    4.268767] sd 7:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/465 GiB)
<5>[    4.268808] sd 7:0:0:0: Attached scsi generic sg4 type 0
<5>[    4.268910] sd 7:0:0:0: [sdd] Write Protect is off
<7>[    4.268913] sd 7:0:0:0: [sdd] Mode Sense: 00 3a 00 00
<5>[    4.268948] sd 7:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<5>[    4.269001] scsi 8:0:0:0: Direct-Access     ATA      WDC WD5000AADS-0 01.0 PQ: 0 ANSI: 5
<5>[    4.269483] sd 8:0:0:0: [sde] 976773168 512-byte logical blocks: (500 GB/465 GiB)
<5>[    4.269568] sd 8:0:0:0: [sde] Write Protect is off
<7>[    4.269571] sd 8:0:0:0: [sde] Mode Sense: 00 3a 00 00
<5>[    4.269590] sd 8:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<5>[    4.269717] sd 8:0:0:0: Attached scsi generic sg5 type 0
<6>[    4.277243]  sdd: sdd1
<5>[    4.277506] sd 7:0:0:0: [sdd] Attached SCSI disk
<6>[    4.277632]  sde: sde1
<5>[    4.277876] sd 8:0:0:0: [sde] Attached SCSI disk
<6>[    4.400801] md: bind<sdd1>
<6>[    4.403501] md: bind<sde1>
<6>[    4.572031] ata10: SATA link down (SStatus 0 SControl 300)
<6>[    4.661144] md: bind<sdb1>
<6>[    4.663798] async_tx: api initialized (async)
<4>[    4.681024] raid6: int64x1   1960 MB/s
<4>[    4.698029] raid6: int64x2   2808 MB/s
<4>[    4.715031] raid6: int64x4   1988 MB/s
<4>[    4.732056] raid6: int64x8   1789 MB/s
<4>[    4.749024] raid6: sse2x1    3343 MB/s
<4>[    4.766015] raid6: sse2x2    5003 MB/s
<4>[    4.783017] raid6: sse2x4    5570 MB/s
<4>[    4.783020] raid6: using algorithm sse2x4 (5570 MB/s)
<6>[    4.783613] xor: automatically using best checksumming function: generic_sse
<6>[    4.788015]    generic_sse:  8904.000 MB/sec
<6>[    4.788017] xor: using function: generic_sse (8904.000 MB/sec)
<6>[    4.788977] md: raid6 personality registered for level 6
<6>[    4.788980] md: raid5 personality registered for level 5
<6>[    4.788982] md: raid4 personality registered for level 4
<6>[    4.789157] bio: create slab <bio-1> at 1
<6>[    4.789179] md/raid:md1: device sdb1 operational as raid disk 0
<6>[    4.789181] md/raid:md1: device sde1 operational as raid disk 3
<6>[    4.789184] md/raid:md1: device sdd1 operational as raid disk 2
<6>[    4.789186] md/raid:md1: device sdc1 operational as raid disk 1
<6>[    4.789547] md/raid:md1: allocated 4280kB
<6>[    4.789588] md/raid:md1: raid level 5 active with 4 out of 4 devices, algorithm 2
<7>[    4.789590] RAID conf printout:
<7>[    4.789591]  --- level:5 rd:4 wd:4
<7>[    4.789593]  disk 0, o:1, dev:sdb1
<7>[    4.789595]  disk 1, o:1, dev:sdc1
<7>[    4.789597]  disk 2, o:1, dev:sdd1
<7>[    4.789598]  disk 3, o:1, dev:sde1
<6>[    4.789625] md1: detected capacity change from 0 to 1500317024256
<6>[    4.791416]  md1: unknown partition table
<6>[    5.928302] md: linear personality registered for level -1
<6>[    5.930185] md: multipath personality registered for level -4
<6>[    5.931992] md: raid0 personality registered for level 0
<6>[    5.934243] md: raid1 personality registered for level 1
<6>[    5.941472] md: raid10 personality registered for level 10
<6>[    6.038456] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
<6>[    6.315645] Adding 8283024k swap on /dev/sda4.  Priority:-1 extents:1 across:8283024k SS
<6>[    6.469990] EXT4-fs (sda1): re-mounted. Opts: discard,errors=remount-ro
<4>[    6.527445] init: portmap-wait (statd) main process (706) killed by TERM signal
<4>[    6.540829] init: statd-mounting main process (699) killed by TERM signal
<6>[    6.548959] RPC: Registered named UNIX socket transport module.
<6>[    6.548964] RPC: Registered udp transport module.
<6>[    6.548966] RPC: Registered tcp transport module.
<6>[    6.548967] RPC: Registered tcp NFSv4.1 backchannel transport module.
<5>[    6.550758] FS-Cache: Loaded
<5>[    6.555962] FS-Cache: Netfs 'nfs' registered for caching
<6>[    6.802068] EXT4-fs (md1): mounted filesystem with ordered data mode. Opts: (null)
<6>[    7.328814] ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>[    7.328824] ADDRCONF(NETDEV_UP): eth1: link is not ready
<6>[    7.337536] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
<4>[    7.347657] init: flush-early-job-log main process (759) terminated with status 1
<6>[    7.366893] Bluetooth: Core ver 2.16
<6>[    7.366918] NET: Registered protocol family 31
<6>[    7.366920] Bluetooth: HCI device and connection manager initialized
<6>[    7.366925] Bluetooth: HCI socket layer initialized
<6>[    7.366927] Bluetooth: L2CAP socket layer initialized
<6>[    7.366933] Bluetooth: SCO socket layer initialized
<6>[    7.368727] Bluetooth: RFCOMM TTY layer initialized
<6>[    7.368732] Bluetooth: RFCOMM socket layer initialized
<6>[    7.368734] Bluetooth: RFCOMM ver 1.11
<30>[    7.498065] udevd[790]: starting version 175
<6>[    7.513074] lp: driver loaded but no devices found
<6>[    7.525880] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[    7.525884] Bluetooth: BNEP filters: protocol multicast
<6>[    7.544452] i2c i2c-3: nForce2 SMBus adapter at 0x2440
<6>[    7.544481] i2c i2c-4: nForce2 SMBus adapter at 0x2400
<6>[    7.544637] i2c i2c-5: nForce2 SMBus adapter at 0x5440
<6>[    7.544668] i2c i2c-6: nForce2 SMBus adapter at 0x5400
<6>[    7.545511] NV_TCO: NV TCO WatchDog Timer Driver v0.01
<6>[    7.545613] NV_TCO: Watchdog reboot not detected.
<6>[    7.545938] NV_TCO: initialized (0x1440). heartbeat=30 sec (nowayout=0)
<6>[    7.612046] ppdev: user-space parallel port driver
<5>[    7.635277] type=1400 audit(1367124768.583:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1038 comm="apparmor_parser"
<5>[    7.635893] type=1400 audit(1367124768.583:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1038 comm="apparmor_parser"
<5>[    7.639249] type=1400 audit(1367124768.587:4): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=1056 comm="apparmor_parser"
<5>[    7.639792] type=1400 audit(1367124768.587:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1056 comm="apparmor_parser"
<5>[    7.640169] type=1400 audit(1367124768.588:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=1056 comm="apparmor_parser"
<6>[    7.642648] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
<6>[    7.648857] MCE: In-kernel MCE decoding enabled.
<3>[    7.650113] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
<3>[    7.650149] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
<6>[    7.650709] EDAC MC: Ver: 2.1.0
<6>[    7.657921] AMD64 EDAC driver v3.4.0
<6>[    7.658017] EDAC amd64: DRAM ECC enabled.
<6>[    7.658034] EDAC amd64: F10h detected (node 0).
<7>[    7.658068] EDAC MC: DCT0 chip selects:
<6>[    7.658070] EDAC amd64: MC: 0:  1024MB 1:     0MB
<6>[    7.658072] EDAC amd64: MC: 2:  1024MB 3:     0MB
<6>[    7.658074] EDAC amd64: MC: 4:     0MB 5:     0MB
<6>[    7.658076] EDAC amd64: MC: 6:     0MB 7:     0MB
<7>[    7.658080] EDAC MC: DCT1 chip selects:
<6>[    7.658085] EDAC amd64: MC: 0:  1024MB 1:     0MB
<6>[    7.658090] EDAC amd64: MC: 2:  1024MB 3:     0MB
<6>[    7.658095] EDAC amd64: MC: 4:     0MB 5:     0MB
<6>[    7.658099] EDAC amd64: MC: 6:     0MB 7:     0MB
<6>[    7.658103] EDAC amd64: using x4 syndromes.
<6>[    7.658109] EDAC amd64: MCT channel count: 2
<6>[    7.660091] EDAC amd64: CS0: Registered DDR2 RAM
<6>[    7.660093] EDAC amd64: CS2: Registered DDR2 RAM
<6>[    7.660137] EDAC MC0: Giving out device to 'amd64_edac' 'F10h': DEV 0000:00:18.2
<6>[    7.660189] EDAC amd64: DRAM ECC enabled.
<6>[    7.660203] EDAC amd64: F10h detected (node 1).
<7>[    7.660242] EDAC MC: DCT0 chip selects:
<6>[    7.660245] EDAC amd64: MC: 0:  1024MB 1:     0MB
<6>[    7.660247] EDAC amd64: MC: 2:  1024MB 3:     0MB
<6>[    7.660249] EDAC amd64: MC: 4:     0MB 5:     0MB
<6>[    7.660250] EDAC amd64: MC: 6:     0MB 7:     0MB
<7>[    7.660252] EDAC MC: DCT1 chip selects:
<6>[    7.660254] EDAC amd64: MC: 0:  1024MB 1:     0MB
<6>[    7.660255] EDAC amd64: MC: 2:  1024MB 3:     0MB
<6>[    7.660257] EDAC amd64: MC: 4:     0MB 5:     0MB
<6>[    7.660258] EDAC amd64: MC: 6:     0MB 7:     0MB
<6>[    7.660260] EDAC amd64: using x4 syndromes.
<6>[    7.660262] EDAC amd64: MCT channel count: 2
<6>[    7.660304] EDAC amd64: CS0: Registered DDR2 RAM
<6>[    7.660306] EDAC amd64: CS2: Registered DDR2 RAM
<6>[    7.660343] EDAC MC1: Giving out device to 'amd64_edac' 'F10h': DEV 0000:00:19.2
<6>[    7.660433] EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED)
<6>[    7.701588] Linux video capture interface: v2.00
<6>[    7.705136] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0825)
<4>[    7.705457] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 20
<6>[    7.705466] snd_hda_intel 0000:00:06.1: PCI INT B -> Link[LAZA] -> GSI 20 (level, low) -> IRQ 20
<6>[    7.705470] hda_intel: Disabling MSI
<7>[    7.705584] snd_hda_intel 0000:00:06.1: setting latency timer to 64
<6>[    7.801913] input: UVC Camera (046d:0825) as /devices/pci0000:00/0000:00:02.1/usb1/1-7/1-7:1.0/input/input6
<6>[    7.802040] usbcore: registered new interface driver uvcvideo
<6>[    7.802043] USB Video Class driver (1.1.1)
<4>[    7.824060] init: failsafe main process (1263) killed by TERM signal
<5>[    7.877108] type=1400 audit(1367124768.825:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1347 comm="apparmor_parser"
<5>[    7.877424] type=1400 audit(1367124768.825:8): apparmor="STATUS" operation="profile_load" name="/usr/bin/freshclam" pid=1351 comm="apparmor_parser"
<5>[    7.877557] type=1400 audit(1367124768.825:9): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1348 comm="apparmor_parser"
<5>[    7.877646] type=1400 audit(1367124768.825:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/clamd" pid=1352 comm="apparmor_parser"
<5>[    7.878109] type=1400 audit(1367124768.826:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1348 comm="apparmor_parser"
<6>[    7.917960] hda_codec: ALC262: SKU not ready 0x411111f0
<7>[    7.973219] forcedeth 0000:00:08.0: irq 85 for MSI/MSI-X
<6>[    7.973482] forcedeth 0000:00:08.0: eth0: no link during initialization
<6>[    7.975125] ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>[    7.975750] ADDRCONF(NETDEV_UP): eth0: link is not ready
<7>[    7.978616] forcedeth 0000:00:09.0: irq 86 for MSI/MSI-X
<4>[    8.033681] init: alsa-restore main process (1445) terminated with status 19
<6>[    8.047175] input: HDA NVidia Line-Out as /devices/pci0000:00/0000:00:06.1/sound/card0/input7
<6>[    8.047285] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:06.1/sound/card0/input8
<6>[    8.064804] kvm: Nested Virtualization enabled
<6>[    8.064811] kvm: Nested Paging enabled
<4>[    8.804136] 3:3:1: cannot get freq at ep 0x86
<6>[    8.948140] usbcore: registered new interface driver snd-usb-audio
<7>[    8.974319] vboxdrv: Found 8 processor cores.
<4>[    8.974730] vboxdrv: fAsync=0 offMin=0x4cd offMax=0x3c5e
<6>[    8.974854] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
<7>[    8.974857] vboxdrv: Successfully loaded version 4.1.12_Ubuntu (interface 0x00190000).
<6>[    8.985705] vboxpci: IOMMU not found (not registered)
<4>[    9.618286] init: plymouth-stop pre-start process (2722) terminated with status 1
<7>[   18.034025] eth1: no IPv6 routers present
ludovic@Super-Ordinateur:~$ 

J'ai un SSD et finalement je me demande si ce n'est pas la recherche de l'IPv6 qui ralentirait ?

Je pars à la recherche du forçage IPv4.

#19 Le 28/04/2013, à 06:16

Compte supprimé

Re : demarrage en 25 sec

Bon, c'est toujours un gain de 0,7 seconde en désactivant IPv6.

ludovic@Super-Ordinateur:~$ dmesg -r
<6>[    0.000000] Initializing cgroup subsys cpuset
<6>[    0.000000] Initializing cgroup subsys cpu
<5>[    0.000000] Linux version 3.2.0-40-lowlatency (buildd@allspice) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #43-Ubuntu SMP PREEMPT Wed Apr 3 18:26:22 UTC 2013 (Ubuntu 3.2.0-40.43-lowlatency 3.2.40)
<6>[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-40-lowlatency root=UUID=32b73871-8597-4b14-8b63-45aa173dfbc3 ro quiet splash vt.handoff=7
<6>[    0.000000] KERNEL supported cpus:
<6>[    0.000000]   Intel GenuineIntel
<6>[    0.000000]   AMD AuthenticAMD
<6>[    0.000000]   Centaur CentaurHauls
<6>[    0.000000] BIOS-provided physical RAM map:
<6>[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
<6>[    0.000000]  BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
<6>[    0.000000]  BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved)
<6>[    0.000000]  BIOS-e820: 0000000000100000 - 00000000afde0000 (usable)
<6>[    0.000000]  BIOS-e820: 00000000afde0000 - 00000000afdea000 (ACPI data)
<6>[    0.000000]  BIOS-e820: 00000000afdea000 - 00000000afdeb000 (ACPI NVS)
<6>[    0.000000]  BIOS-e820: 00000000afdeb000 - 00000000b0000000 (reserved)
<6>[    0.000000]  BIOS-e820: 00000000b4000000 - 00000000b8000000 (reserved)
<6>[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
<6>[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
<6>[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
<6>[    0.000000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
<6>[    0.000000]  BIOS-e820: 0000000100000000 - 0000000250000000 (usable)
<6>[    0.000000] NX (Execute Disable) protection: active
<6>[    0.000000] SMBIOS 2.4 present.
<7>[    0.000000] DMI: Tyan Computer Corporation  MCP55 /S2915 , BIOS 4.01d.2915 05/25/2010
<7>[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
<7>[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
<6>[    0.000000] No AGP bridge found
<6>[    0.000000] last_pfn = 0x250000 max_arch_pfn = 0x400000000
<7>[    0.000000] MTRR default type: uncachable
<7>[    0.000000] MTRR fixed ranges enabled:
<7>[    0.000000]   00000-9FFFF write-back
<7>[    0.000000]   A0000-BFFFF uncachable
<7>[    0.000000]   C0000-D3FFF write-protect
<7>[    0.000000]   D4000-E3FFF uncachable
<7>[    0.000000]   E4000-FFFFF write-protect
<7>[    0.000000] MTRR variable ranges enabled:
<7>[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
<7>[    0.000000]   1 base 000080000000 mask FFFFE0000000 write-back
<7>[    0.000000]   2 base 0000A0000000 mask FFFFF0000000 write-back
<7>[    0.000000]   3 disabled
<7>[    0.000000]   4 disabled
<7>[    0.000000]   5 disabled
<7>[    0.000000]   6 disabled
<7>[    0.000000]   7 disabled
<7>[    0.000000] TOM2: 0000000250000000 aka 9472M
<6>[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
<7>[    0.000000] e820 update range: 00000000b0000000 - 0000000100000000 (usable) ==> (reserved)
<6>[    0.000000] last_pfn = 0xafde0 max_arch_pfn = 0x400000000
<6>[    0.000000] found SMP MP-table at [ffff8800000f7940] f7940
<7>[    0.000000] initial memory mapped : 0 - 20000000
<7>[    0.000000] Base memory trampoline at [ffff880000096000] 96000 size 20480
<6>[    0.000000] Using GB pages for direct mapping
<6>[    0.000000] init_memory_mapping: 0000000000000000-00000000afde0000
<7>[    0.000000]  0000000000 - 0080000000 page 1G
<7>[    0.000000]  0080000000 - 00afc00000 page 2M
<7>[    0.000000]  00afc00000 - 00afde0000 page 4k
<7>[    0.000000] kernel direct mapping tables up to afde0000 @ 1fffd000-20000000
<6>[    0.000000] init_memory_mapping: 0000000100000000-0000000250000000
<7>[    0.000000]  0100000000 - 0240000000 page 1G
<7>[    0.000000]  0240000000 - 0250000000 page 2M
<7>[    0.000000] kernel direct mapping tables up to 250000000 @ afdde000-afde0000
<6>[    0.000000] RAMDISK: 35606000 - 36afb000
<4>[    0.000000] ACPI: RSDP 00000000000f7910 00024 (v02 PTLTD )
<4>[    0.000000] ACPI: XSDT 00000000afde2a70 00064 (v01 PTLTD  ? XSDT   06040000  LTP 00000000)
<4>[    0.000000] ACPI: FACP 00000000afde87c2 000F4 (v03 NVIDIA CK8S     06040000 PTL_ 000F4240)
<4>[    0.000000] ACPI: DSDT 00000000afde2ad4 05C7A (v01 NVIDIA      CK8 06040000 MSFT 03000000)
<4>[    0.000000] ACPI: FACS 00000000afdeafc0 00040
<4>[    0.000000] ACPI: SRAT 00000000afde88b6 00150 (v01 AMD    FAM_F_10 06040000 AMD  00000001)
<4>[    0.000000] ACPI: SSDT 00000000afde8a06 0143C (v01 AMD    POWERNOW 06040000 AMD  00000001)
<4>[    0.000000] ACPI: SPCR 00000000afde9e42 00050 (v01 PTLTD  $UCRTBL$ 06040000 PTL  00000001)
<4>[    0.000000] ACPI: MCFG 00000000afde9e92 0003C (v01 PTLTD    MCFG   06040000  LTP 00000000)
<4>[    0.000000] ACPI: HPET 00000000afde9ece 00038 (v01 PTLTD  HPETTBL  06040000  LTP 00000001)
<4>[    0.000000] ACPI: APIC 00000000afde9f06 000D2 (v01 PTLTD  ? APIC   06040000  LTP 00000000)
<4>[    0.000000] ACPI: BOOT 00000000afde9fd8 00028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
<7>[    0.000000] ACPI: Local APIC address 0xfee00000
<6>[    0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
<6>[    0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
<6>[    0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
<6>[    0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
<6>[    0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
<6>[    0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
<6>[    0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
<6>[    0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
<6>[    0.000000] SRAT: Node 0 PXM 0 0-a0000
<6>[    0.000000] SRAT: Node 0 PXM 0 100000-b0000000
<6>[    0.000000] SRAT: Node 0 PXM 0 100000000-150000000
<6>[    0.000000] SRAT: Node 1 PXM 1 150000000-250000000
<6>[    0.000000] NUMA: Node 0 [0,a0000) + [100000,b0000000) -> [0,b0000000)
<6>[    0.000000] NUMA: Node 0 [0,b0000000) + [100000000,150000000) -> [0,150000000)
<6>[    0.000000] Initmem setup node 0 0000000000000000-0000000150000000
<6>[    0.000000]   NODE_DATA [000000014fffb000 - 000000014fffffff]
<6>[    0.000000] Initmem setup node 1 0000000150000000-0000000250000000
<6>[    0.000000]   NODE_DATA [000000024fffb000 - 000000024fffffff]
<7>[    0.000000]  [ffffea0000000000-ffffea00053fffff] PMD -> [ffff88014be00000-ffff88014fdfffff] on node 0
<7>[    0.000000]  [ffffea0005400000-ffffea00093fffff] PMD -> [ffff88024b600000-ffff88024f5fffff] on node 1
<4>[    0.000000] Zone PFN ranges:
<4>[    0.000000]   DMA      0x00000010 -> 0x00001000
<4>[    0.000000]   DMA32    0x00001000 -> 0x00100000
<4>[    0.000000]   Normal   0x00100000 -> 0x00250000
<4>[    0.000000] Movable zone start PFN for each node
<4>[    0.000000] early_node_map[4] active PFN ranges
<4>[    0.000000]     0: 0x00000010 -> 0x0000009b
<4>[    0.000000]     0: 0x00000100 -> 0x000afde0
<4>[    0.000000]     0: 0x00100000 -> 0x00150000
<4>[    0.000000]     1: 0x00150000 -> 0x00250000
<7>[    0.000000] On node 0 totalpages: 1047915
<7>[    0.000000]   DMA zone: 64 pages used for memmap
<7>[    0.000000]   DMA zone: 5 pages reserved
<7>[    0.000000]   DMA zone: 3910 pages, LIFO batch:0
<7>[    0.000000]   DMA32 zone: 16320 pages used for memmap
<7>[    0.000000]   DMA32 zone: 699936 pages, LIFO batch:31
<7>[    0.000000]   Normal zone: 5120 pages used for memmap
<7>[    0.000000]   Normal zone: 322560 pages, LIFO batch:31
<7>[    0.000000] On node 1 totalpages: 1048576
<7>[    0.000000]   Normal zone: 16384 pages used for memmap
<7>[    0.000000]   Normal zone: 1032192 pages, LIFO batch:31
<6>[    0.000000] ACPI: PM-Timer IO Port: 0x1008
<7>[    0.000000] ACPI: Local APIC address 0xfee00000
<6>[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
<6>[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
<6>[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
<6>[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
<6>[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
<6>[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
<6>[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
<6>[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
<6>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
<6>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
<6>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
<6>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
<6>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
<6>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
<6>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
<6>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
<6>[    0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
<6>[    0.000000] IOAPIC[0]: apic_id 8, version 17, address 0xfec00000, GSI 0-23
<6>[    0.000000] ACPI: IOAPIC (id[0x09] address[0xc8000000] gsi_base[24])
<6>[    0.000000] IOAPIC[1]: apic_id 9, version 17, address 0xc8000000, GSI 24-47
<6>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
<6>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
<6>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<7>[    0.000000] ACPI: IRQ0 used by override.
<7>[    0.000000] ACPI: IRQ2 used by override.
<7>[    0.000000] ACPI: IRQ9 used by override.
<6>[    0.000000] Using ACPI (MADT) for SMP configuration information
<6>[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
<6>[    0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
<7>[    0.000000] nr_irqs_gsi: 64
<6>[    0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000
<6>[    0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
<6>[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
<6>[    0.000000] PM: Registered nosave memory: 00000000000d2000 - 0000000000100000
<6>[    0.000000] PM: Registered nosave memory: 00000000afde0000 - 00000000afdea000
<6>[    0.000000] PM: Registered nosave memory: 00000000afdea000 - 00000000afdeb000
<6>[    0.000000] PM: Registered nosave memory: 00000000afdeb000 - 00000000b0000000
<6>[    0.000000] PM: Registered nosave memory: 00000000b0000000 - 00000000b4000000
<6>[    0.000000] PM: Registered nosave memory: 00000000b4000000 - 00000000b8000000
<6>[    0.000000] PM: Registered nosave memory: 00000000b8000000 - 00000000e0000000
<6>[    0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
<6>[    0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
<6>[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
<6>[    0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fee00000
<6>[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
<6>[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff80000
<6>[    0.000000] PM: Registered nosave memory: 00000000fff80000 - 0000000100000000
<6>[    0.000000] Allocating PCI resources starting at b8000000 (gap: b8000000:28000000)
<6>[    0.000000] Booting paravirtualized kernel on bare hardware
<6>[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:2
<6>[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88014bc00000 s83328 r8192 d23168 u524288
<7>[    0.000000] pcpu-alloc: s83328 r8192 d23168 u524288 alloc=1*2097152
<7>[    0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7 
<4>[    0.000000] Built 2 zonelists in Zone order, mobility grouping on.  Total pages: 2058598
<4>[    0.000000] Policy zone: Normal
<5>[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-40-lowlatency root=UUID=32b73871-8597-4b14-8b63-45aa173dfbc3 ro quiet splash vt.handoff=7
<6>[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
<6>[    0.000000] Checking aperture...
<6>[    0.000000] No AGP bridge found
<6>[    0.000000] Node 0: aperture @ b4000000 size 64 MB
<6>[    0.000000] Node 1: aperture @ b4000000 size 64 MB
<6>[    0.000000] Memory: 8150588k/9699328k available (6632k kernel code, 1313364k absent, 235376k reserved, 6576k data, 868k init)
<6>[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=2
<6>[    0.000000] Preemptible hierarchical RCU implementation.
<6>[    0.000000] 	Verbose stalled-CPUs detection is disabled.
<6>[    0.000000] NR_IRQS:16640 nr_irqs:1152 16
<6>[    0.000000] Extended CMOS year: 2000
<7>[    0.000000] spurious 8259A interrupt: IRQ7.
<6>[    0.000000] vt handoff: transparent VT on vt#7
<6>[    0.000000] Console: colour dummy device 80x25
<6>[    0.000000] console [tty0] enabled
<6>[    0.000000] allocated 67108864 bytes of page_cgroup
<6>[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
<7>[    0.000000] hpet clockevent registered
<4>[    0.000000] Fast TSC calibration using PIT
<4>[    0.000000] Detected 2299.969 MHz processor.
<6>[    0.001005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4599.93 BogoMIPS (lpj=2299969)
<6>[    0.001010] pid_max: default: 32768 minimum: 301
<6>[    0.001054] Security Framework initialized
<6>[    0.001070] AppArmor: AppArmor initialized
<6>[    0.001071] Yama: becoming mindful.
<6>[    0.002485] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
<6>[    0.006082] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
<6>[    0.007665] Mount-cache hash table entries: 256
<6>[    0.007850] Initializing cgroup subsys cpuacct
<6>[    0.007858] Initializing cgroup subsys memory
<6>[    0.007885] Initializing cgroup subsys devices
<6>[    0.007888] Initializing cgroup subsys freezer
<6>[    0.007890] Initializing cgroup subsys blkio
<6>[    0.007897] Initializing cgroup subsys perf_event
<7>[    0.007933] tseg: 00afe00000
<6>[    0.007935] CPU: Physical Processor ID: 0
<6>[    0.007937] CPU: Processor Core ID: 0
<6>[    0.007939] mce: CPU supports 6 MCE banks
<6>[    0.007950] using AMD E400 aware idle routine
<6>[    0.008725] ACPI: Core revision 20110623
<6>[    0.012011] ftrace: allocating 26511 entries in 104 pages
<6>[    0.015766] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
<6>[    0.025816] CPU0: Quad-Core AMD Opteron(tm) Processor 2356 stepping 03
<6>[    0.025998] Performance Events: AMD PMU driver.
<6>[    0.025998] ... version:                0
<6>[    0.025998] ... bit width:              48
<6>[    0.025998] ... generic registers:      4
<6>[    0.025998] ... value mask:             0000ffffffffffff
<6>[    0.025998] ... max period:             00007fffffffffff
<6>[    0.025998] ... fixed-purpose events:   0
<6>[    0.025998] ... event mask:             000000000000000f
<6>[    0.031082] NMI watchdog enabled, takes one hw-pmu counter.
<6>[    0.039014] Booting Node   0, Processors  #1
<7>[    0.039017] smpboot cpu 1: start_ip = 96000
<6>[    0.111016] NMI watchdog enabled, takes one hw-pmu counter.
<4>[    0.117010]  #2
<7>[    0.117012] smpboot cpu 2: start_ip = 96000
<6>[    0.189001] NMI watchdog enabled, takes one hw-pmu counter.
<4>[    0.194995]  #3
<7>[    0.194996] smpboot cpu 3: start_ip = 96000
<6>[    0.266990] NMI watchdog enabled, takes one hw-pmu counter.
<4>[    0.272989]  Ok.
<6>[    0.272990] Booting Node   1, Processors  #4
<7>[    0.272992] smpboot cpu 4: start_ip = 96000
<6>[    0.344983] NMI watchdog enabled, takes one hw-pmu counter.
<4>[    0.350975]  #5
<7>[    0.350977] smpboot cpu 5: start_ip = 96000
<6>[    0.422970] NMI watchdog enabled, takes one hw-pmu counter.
<4>[    0.428967]  #6
<7>[    0.428969] smpboot cpu 6: start_ip = 96000
<6>[    0.500958] NMI watchdog enabled, takes one hw-pmu counter.
<4>[    0.506950]  #7 Ok.
<7>[    0.506951] smpboot cpu 7: start_ip = 96000
<6>[    0.578946] NMI watchdog enabled, takes one hw-pmu counter.
<6>[    0.580925] Brought up 8 CPUs
<6>[    0.580928] Total of 8 processors activated (36812.68 BogoMIPS).
<6>[    0.582979] devtmpfs: initialized
<6>[    0.584401] EVM: security.selinux
<6>[    0.584403] EVM: security.SMACK64
<6>[    0.584405] EVM: security.capability
<6>[    0.584437] PM: Registering ACPI NVS region at afdea000 (4096 bytes)
<6>[    0.585692] print_constraints: dummy: 
<6>[    0.585741] RTC time:  5:13:13, date: 04/28/13
<6>[    0.585784] NET: Registered protocol family 16
<7>[    0.585905] node 0 link 2: io port [1000, 4fff]
<7>[    0.585909] node 1 link 0: io port [5000, 5fff]
<7>[    0.585911] node 1 link 0: io port [f000, ffff]
<6>[    0.585926] TOM: 00000000b0000000 aka 2816M
<7>[    0.585929] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
<7>[    0.585932] node 0 link 2: mmio [b8000000, c7ffffff]
<7>[    0.585936] node 1 link 0: mmio [c8000000, cfffffff]
<7>[    0.585939] node 0 link 2: mmio [a0000, bffff]
<7>[    0.585942] node 0 link 2: mmio [e0000000, e7ffffff] ==> none
<7>[    0.585945] node 1 link 0: mmio [e8000000, efffffff] ==> none
<6>[    0.585948] TOM2: 0000000250000000 aka 9472M
<7>[    0.585950] bus: [00, 7f] on node 0 link 2
<7>[    0.585952] bus: 00 index 0 [io  0x0000-0x4fff]
<7>[    0.585954] bus: 00 index 1 [io  0x6000-0xefff]
<7>[    0.585956] bus: 00 index 2 [mem 0xb0000000-0xc7ffffff]
<7>[    0.585958] bus: 00 index 3 [mem 0x000a0000-0x000bffff]
<7>[    0.585960] bus: 00 index 4 [mem 0xf0000000-0xffffffff]
<7>[    0.585962] bus: 00 index 5 [mem 0xd0000000-0xdfffffff]
<7>[    0.585964] bus: 00 index 6 [mem 0x250000000-0xfcffffffff]
<7>[    0.585966] bus: [80, ff] on node 1 link 0
<7>[    0.585967] bus: 80 index 0 [io  0x5000-0x5fff]
<7>[    0.585969] bus: 80 index 1 [io  0xf000-0xffff]
<7>[    0.585971] bus: 80 index 2 [mem 0xc8000000-0xcfffffff]
<6>[    0.585798] Trying to unpack rootfs image as initramfs...
<6>[    0.585982] Extended Config Space enabled on 2 nodes
<6>[    0.586020] ACPI: bus type pci registered
<6>[    0.586092] PCI: MMCONFIG for domain 0000 [bus 00-82] at [mem 0xe0000000-0xe82fffff] (base 0xe0000000)
<6>[    0.586096] PCI: MMCONFIG at [mem 0xe0000000-0xe82fffff] reserved in E820
<6>[    0.598494] PCI: Using configuration type 1 for base access
<6>[    0.599550] bio: create slab <bio-0> at 0
<6>[    0.599550] ACPI: Added _OSI(Module Device)
<6>[    0.599550] ACPI: Added _OSI(Processor Device)
<6>[    0.599550] ACPI: Added _OSI(3.0 _SCP Extensions)
<6>[    0.599550] ACPI: Added _OSI(Processor Aggregator Device)
<7>[    0.600793] ACPI: EC: Look up EC in DSDT
<6>[    0.604388] ACPI: Interpreter enabled
<6>[    0.604393] ACPI: (supports S0 S1 S3 S4 S5)
<6>[    0.604414] ACPI: Using IOAPIC for interrupt routing
<6>[    0.610540] ACPI: No dock devices found.
<6>[    0.610542] HEST: Table not found.
<6>[    0.610547] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
<6>[    0.610666] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7f])
<6>[    0.610870] pci_root PNP0A03:00: host bridge window [io  0x0000-0x03af]
<6>[    0.610873] pci_root PNP0A03:00: host bridge window [io  0x03b0-0x03df]
<6>[    0.610875] pci_root PNP0A03:00: host bridge window [io  0x03e0-0x0cf7]
<6>[    0.610878] pci_root PNP0A03:00: host bridge window [io  0x0d00-0x4fff]
<6>[    0.610880] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
<6>[    0.610883] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
<6>[    0.610885] pci_root PNP0A03:00: host bridge window [mem 0xb0000000-0xc7ffffff]
<6>[    0.610892] pci_root PNP0A03:00: ignoring host bridge window [mem 0x000c0000-0x000dffff] (conflicts with reserved [mem 0x000d2000-0x000fffff])
<7>[    0.610927] pci 0000:00:00.0: [10de:0369] type 0 class 0x000500
<7>[    0.611121] pci 0000:00:01.0: [10de:0364] type 0 class 0x000601
<7>[    0.611129] pci 0000:00:01.0: reg 10: [io  0x1c00-0x1c7f]
<7>[    0.611167] pci 0000:00:01.1: [10de:0368] type 0 class 0x000c05
<7>[    0.611180] pci 0000:00:01.1: reg 10: [io  0x2000-0x203f]
<7>[    0.611200] pci 0000:00:01.1: reg 20: [io  0x2440-0x247f]
<7>[    0.611207] pci 0000:00:01.1: reg 24: [io  0x2400-0x243f]
<7>[    0.611240] pci 0000:00:01.1: PME# supported from D3hot D3cold
<7>[    0.611246] pci 0000:00:01.1: PME# disabled
<7>[    0.611267] pci 0000:00:02.0: [10de:036c] type 0 class 0x000c03
<7>[    0.611277] pci 0000:00:02.0: reg 10: [mem 0xb8004000-0xb8004fff]
<7>[    0.611315] pci 0000:00:02.0: supports D1 D2
<7>[    0.611317] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
<7>[    0.611320] pci 0000:00:02.0: PME# disabled
<7>[    0.611332] pci 0000:00:02.1: [10de:036d] type 0 class 0x000c03
<7>[    0.611344] pci 0000:00:02.1: reg 10: [mem 0xb8005000-0xb80050ff]
<7>[    0.611383] pci 0000:00:02.1: supports D1 D2
<7>[    0.611385] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
<7>[    0.611388] pci 0000:00:02.1: PME# disabled
<7>[    0.611405] pci 0000:00:04.0: [10de:036e] type 0 class 0x000101
<7>[    0.611426] pci 0000:00:04.0: reg 20: [io  0x2480-0x248f]
<7>[    0.611455] pci 0000:00:05.0: [10de:037f] type 0 class 0x000101
<7>[    0.611466] pci 0000:00:05.0: reg 10: [io  0x24d0-0x24d7]
<7>[    0.611471] pci 0000:00:05.0: reg 14: [io  0x24c4-0x24c7]
<7>[    0.611476] pci 0000:00:05.0: reg 18: [io  0x24c8-0x24cf]
<7>[    0.611481] pci 0000:00:05.0: reg 1c: [io  0x24c0-0x24c3]
<7>[    0.611486] pci 0000:00:05.0: reg 20: [io  0x2490-0x249f]
<7>[    0.611491] pci 0000:00:05.0: reg 24: [mem 0xb8006000-0xb8006fff]
<7>[    0.611530] pci 0000:00:05.1: [10de:037f] type 0 class 0x000101
<7>[    0.611541] pci 0000:00:05.1: reg 10: [io  0x24e8-0x24ef]
<7>[    0.611546] pci 0000:00:05.1: reg 14: [io  0x24dc-0x24df]
<7>[    0.611551] pci 0000:00:05.1: reg 18: [io  0x24e0-0x24e7]
<7>[    0.611556] pci 0000:00:05.1: reg 1c: [io  0x24d8-0x24db]
<7>[    0.611561] pci 0000:00:05.1: reg 20: [io  0x24a0-0x24af]
<7>[    0.611567] pci 0000:00:05.1: reg 24: [mem 0xb8007000-0xb8007fff]
<7>[    0.611602] pci 0000:00:05.2: [10de:037f] type 0 class 0x000101
<7>[    0.611612] pci 0000:00:05.2: reg 10: [io  0x2800-0x2807]
<7>[    0.611617] pci 0000:00:05.2: reg 14: [io  0x24f4-0x24f7]
<7>[    0.611622] pci 0000:00:05.2: reg 18: [io  0x24f8-0x24ff]
<7>[    0.611627] pci 0000:00:05.2: reg 1c: [io  0x24f0-0x24f3]
<7>[    0.611632] pci 0000:00:05.2: reg 20: [io  0x24b0-0x24bf]
<7>[    0.611638] pci 0000:00:05.2: reg 24: [mem 0xb8008000-0xb8008fff]
<7>[    0.611676] pci 0000:00:06.0: [10de:0370] type 1 class 0x000604
<7>[    0.611715] pci 0000:00:06.1: [10de:0371] type 0 class 0x000403
<7>[    0.611727] pci 0000:00:06.1: reg 10: [mem 0xb8000000-0xb8003fff]
<7>[    0.611772] pci 0000:00:06.1: PME# supported from D3hot D3cold
<7>[    0.611775] pci 0000:00:06.1: PME# disabled
<7>[    0.611799] pci 0000:00:08.0: [10de:0373] type 0 class 0x000680
<7>[    0.611812] pci 0000:00:08.0: reg 10: [mem 0xb8009000-0xb8009fff]
<7>[    0.611818] pci 0000:00:08.0: reg 14: [io  0x2808-0x280f]
<7>[    0.611823] pci 0000:00:08.0: reg 18: [mem 0xb8005800-0xb80058ff]
<7>[    0.611828] pci 0000:00:08.0: reg 1c: [mem 0xb8005400-0xb800540f]
<7>[    0.611867] pci 0000:00:08.0: supports D1 D2
<7>[    0.611869] pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold
<7>[    0.611873] pci 0000:00:08.0: PME# disabled
<7>[    0.611891] pci 0000:00:09.0: [10de:0373] type 0 class 0x000680
<7>[    0.611904] pci 0000:00:09.0: reg 10: [mem 0xb800b000-0xb800bfff]
<7>[    0.611909] pci 0000:00:09.0: reg 14: [io  0x2810-0x2817]
<7>[    0.611922] pci 0000:00:09.0: reg 18: [mem 0xb800a000-0xb800a0ff]
<7>[    0.611927] pci 0000:00:09.0: reg 1c: [mem 0xb8005c00-0xb8005c0f]
<7>[    0.611966] pci 0000:00:09.0: supports D1 D2
<7>[    0.611968] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
<7>[    0.611972] pci 0000:00:09.0: PME# disabled
<7>[    0.611989] pci 0000:00:0a.0: [10de:0376] type 1 class 0x000604
<7>[    0.612027] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
<7>[    0.612030] pci 0000:00:0a.0: PME# disabled
<7>[    0.612049] pci 0000:00:0d.0: [10de:0378] type 1 class 0x000604
<7>[    0.612084] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
<7>[    0.612087] pci 0000:00:0d.0: PME# disabled
<7>[    0.612104] pci 0000:00:0f.0: [10de:0377] type 1 class 0x000604
<7>[    0.612140] pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold
<7>[    0.612142] pci 0000:00:0f.0: PME# disabled
<7>[    0.612162] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
<7>[    0.612196] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
<7>[    0.612215] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
<7>[    0.612237] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
<7>[    0.612262] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
<7>[    0.612285] pci 0000:00:19.0: [1022:1200] type 0 class 0x000600
<7>[    0.612320] pci 0000:00:19.1: [1022:1201] type 0 class 0x000600
<7>[    0.612340] pci 0000:00:19.2: [1022:1202] type 0 class 0x000600
<7>[    0.612361] pci 0000:00:19.3: [1022:1203] type 0 class 0x000600
<7>[    0.612388] pci 0000:00:19.4: [1022:1204] type 0 class 0x000600
<7>[    0.612438] pci 0000:01:05.0: [104c:8023] type 0 class 0x000c00
<7>[    0.612451] pci 0000:01:05.0: reg 10: [mem 0xb8104000-0xb81047ff]
<7>[    0.612459] pci 0000:01:05.0: reg 14: [mem 0xb8100000-0xb8103fff]
<7>[    0.612507] pci 0000:01:05.0: supports D1 D2
<7>[    0.612509] pci 0000:01:05.0: PME# supported from D0 D1 D2 D3hot
<7>[    0.612512] pci 0000:01:05.0: PME# disabled
<6>[    0.612540] pci 0000:00:06.0: PCI bridge to [bus 01-01] (subtractive decode)
<7>[    0.612545] pci 0000:00:06.0:   bridge window [mem 0xb8100000-0xb81fffff]
<7>[    0.612548] pci 0000:00:06.0:   bridge window [io  0x0000-0x03af] (subtractive decode)
<7>[    0.612551] pci 0000:00:06.0:   bridge window [io  0x03b0-0x03df] (subtractive decode)
<7>[    0.612553] pci 0000:00:06.0:   bridge window [io  0x03e0-0x0cf7] (subtractive decode)
<7>[    0.612556] pci 0000:00:06.0:   bridge window [io  0x0d00-0x4fff] (subtractive decode)
<7>[    0.612558] pci 0000:00:06.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
<7>[    0.612561] pci 0000:00:06.0:   bridge window [mem 0xb0000000-0xc7ffffff] (subtractive decode)
<7>[    0.612601] pci 0000:02:00.0: [10b5:8608] type 1 class 0x000604
<7>[    0.612611] pci 0000:02:00.0: reg 10: [mem 0xb8200000-0xb821ffff]
<7>[    0.612666] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
<7>[    0.612675] pci 0000:02:00.0: PME# disabled
<6>[    0.613933] pci 0000:00:0a.0: PCI bridge to [bus 02-07]
<7>[    0.613940] pci 0000:00:0a.0:   bridge window [io  0x3000-0x3fff]
<7>[    0.613944] pci 0000:00:0a.0:   bridge window [mem 0xb8200000-0xb84fffff]
<7>[    0.614022] pci 0000:03:01.0: [10b5:8608] type 1 class 0x000604
<7>[    0.614022] pci 0000:03:01.0: PME# supported from D0 D3hot D3cold
<7>[    0.614022] pci 0000:03:01.0: PME# disabled
<7>[    0.614022] pci 0000:03:05.0: [10b5:8608] type 1 class 0x000604
<7>[    0.614070] pci 0000:03:05.0: PME# supported from D0 D3hot D3cold
<7>[    0.614073] pci 0000:03:05.0: PME# disabled
<7>[    0.614101] pci 0000:03:07.0: [10b5:8608] type 1 class 0x000604
<7>[    0.614164] pci 0000:03:07.0: PME# supported from D0 D3hot D3cold
<7>[    0.614168] pci 0000:03:07.0: PME# disabled
<7>[    0.614196] pci 0000:03:09.0: [10b5:8608] type 1 class 0x000604
<7>[    0.614260] pci 0000:03:09.0: PME# supported from D0 D3hot D3cold
<7>[    0.614263] pci 0000:03:09.0: PME# disabled
<6>[    0.614298] pci 0000:02:00.0: PCI bridge to [bus 03-07]
<7>[    0.614303] pci 0000:02:00.0:   bridge window [io  0x3000-0x3fff]
<7>[    0.614307] pci 0000:02:00.0:   bridge window [mem 0xb8300000-0xb84fffff]
<7>[    0.614368] pci 0000:04:00.0: [1033:0194] type 0 class 0x000c03
<7>[    0.614390] pci 0000:04:00.0: reg 10: [mem 0xb8300000-0xb8301fff 64bit]
<7>[    0.614491] pci 0000:04:00.0: PME# supported from D0 D3hot
<7>[    0.614496] pci 0000:04:00.0: PME# disabled
<6>[    0.615944] pci 0000:03:01.0: PCI bridge to [bus 04-04]
<7>[    0.615955] pci 0000:03:01.0:   bridge window [mem 0xb8300000-0xb83fffff]
<7>[    0.616047] pci 0000:05:00.0: [1b4b:9120] type 0 class 0x000106
<7>[    0.616063] pci 0000:05:00.0: reg 10: [io  0x3020-0x3027]
<7>[    0.616073] pci 0000:05:00.0: reg 14: [io  0x3014-0x3017]
<7>[    0.616083] pci 0000:05:00.0: reg 18: [io  0x3018-0x301f]
<7>[    0.616092] pci 0000:05:00.0: reg 1c: [io  0x3010-0x3013]
<7>[    0.616102] pci 0000:05:00.0: reg 20: [io  0x3000-0x300f]
<7>[    0.616112] pci 0000:05:00.0: reg 24: [mem 0xb8400000-0xb84007ff]
<7>[    0.616122] pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
<7>[    0.616173] pci 0000:05:00.0: PME# supported from D3hot
<7>[    0.616178] pci 0000:05:00.0: PME# disabled
<6>[    0.618062] pci 0000:03:05.0: PCI bridge to [bus 05-05]
<7>[    0.618062] pci 0000:03:05.0:   bridge window [io  0x3000-0x3fff]
<7>[    0.618062] pci 0000:03:05.0:   bridge window [mem 0xb8400000-0xb84fffff]
<6>[    0.618062] pci 0000:03:07.0: PCI bridge to [bus 06-06]
<6>[    0.618062] pci 0000:03:09.0: PCI bridge to [bus 07-07]
<7>[    0.618099] pci 0000:08:00.0: [1033:0125] type 1 class 0x000604
<7>[    0.618161] pci 0000:08:00.0: supports D1
<7>[    0.618163] pci 0000:08:00.0: PME# supported from D0 D1 D3hot D3cold
<7>[    0.618167] pci 0000:08:00.0: PME# disabled
<7>[    0.618189] pci 0000:08:00.1: [1033:0125] type 1 class 0x000604
<7>[    0.618209] pci 0000:08:00.1: reg 10: [mem 0xb8500000-0xb850007f 64bit]
<7>[    0.618280] pci 0000:08:00.1: supports D1
<7>[    0.618282] pci 0000:08:00.1: PME# supported from D0 D1 D3hot D3cold
<7>[    0.618286] pci 0000:08:00.1: PME# disabled
<6>[    0.618310] pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
<6>[    0.618319] pci 0000:00:0d.0: PCI bridge to [bus 08-0a]
<7>[    0.618324] pci 0000:00:0d.0:   bridge window [mem 0xb8500000-0xb85fffff]
<6>[    0.618384] pci 0000:08:00.0: PCI bridge to [bus 09-09]
<6>[    0.618476] pci 0000:08:00.1: PCI bridge to [bus 0a-0a]
<7>[    0.618533] pci 0000:0b:00.0: [1002:5b63] type 0 class 0x000300
<7>[    0.618543] pci 0000:0b:00.0: reg 10: [mem 0xc0000000-0xc7ffffff pref]
<7>[    0.618551] pci 0000:0b:00.0: reg 14: [io  0x4000-0x40ff]
<7>[    0.618558] pci 0000:0b:00.0: reg 18: [mem 0xb8600000-0xb860ffff]
<7>[    0.618580] pci 0000:0b:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
<7>[    0.618611] pci 0000:0b:00.0: supports D1 D2
<7>[    0.618630] pci 0000:0b:00.1: [1002:5b73] type 0 class 0x000380
<7>[    0.618639] pci 0000:0b:00.1: reg 10: [mem 0xb8610000-0xb861ffff]
<7>[    0.618692] pci 0000:0b:00.1: supports D1 D2
<6>[    0.618707] pci 0000:0b:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
<6>[    0.618714] pci 0000:00:0f.0: PCI bridge to [bus 0b-0b]
<7>[    0.618718] pci 0000:00:0f.0:   bridge window [io  0x4000-0x4fff]
<7>[    0.618721] pci 0000:00:0f.0:   bridge window [mem 0xb8600000-0xb86fffff]
<7>[    0.618725] pci 0000:00:0f.0:   bridge window [mem 0xc0000000-0xc7ffffff 64bit pref]
<7>[    0.618737] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<7>[    0.618953] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
<7>[    0.618989] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT]
<7>[    0.619013] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT]
<7>[    0.619032] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2.NECA._PRT]
<7>[    0.619072] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR5._PRT]
<6>[    0.619097]  pci0000:00: Requesting ACPI _OSC control (0x1d)
<6>[    0.619101]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
<6>[    0.619103] ACPI _OSC control for PCIe not granted, disabling ASPM
<6>[    0.633473] ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-ff])
<6>[    0.633634] pci_root PNP0A03:01: host bridge window [io  0x5000-0xffff]
<6>[    0.633637] pci_root PNP0A03:01: host bridge window [io  0x03b0-0x03df]
<6>[    0.633639] pci_root PNP0A03:01: host bridge window [mem 0x000a0000-0x000bffff]
<6>[    0.633641] pci_root PNP0A03:01: host bridge window [mem 0x000c0000-0x000dffff]
<6>[    0.633644] pci_root PNP0A03:01: host bridge window [mem 0xc8000000-0xcfffffff]
<6>[    0.633649] pci_root PNP0A03:01: ignoring host bridge window [mem 0x000c0000-0x000dffff] (conflicts with reserved [mem 0x000d2000-0x000fffff])
<7>[    0.633674] pci 0000:80:00.0: [10de:0369] type 0 class 0x000500
<7>[    0.633864] pci 0000:80:01.0: [10de:0361] type 0 class 0x000500
<7>[    0.633872] pci 0000:80:01.0: reg 10: [io  0xfc00-0xfc7f]
<7>[    0.633878] pci 0000:80:01.0: reg 14: [mem 0xc8000000-0xc8000fff]
<7>[    0.633924] pci 0000:80:01.1: [10de:0368] type 0 class 0x000c05
<7>[    0.633938] pci 0000:80:01.1: reg 10: [io  0x5000-0x503f]
<7>[    0.633959] pci 0000:80:01.1: reg 20: [io  0x5440-0x547f]
<7>[    0.633966] pci 0000:80:01.1: reg 24: [io  0x5400-0x543f]
<7>[    0.634001] pci 0000:80:01.1: PME# supported from D3hot D3cold
<7>[    0.634006] pci 0000:80:01.1: PME# disabled
<7>[    0.634041] pci 0000:80:0a.0: [10de:0376] type 1 class 0x000604
<7>[    0.634081] pci 0000:80:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
<7>[    0.634084] pci 0000:80:0a.0: PME# disabled
<7>[    0.634105] pci 0000:80:0d.0: [10de:0378] type 1 class 0x000604
<7>[    0.634144] pci 0000:80:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
<7>[    0.634147] pci 0000:80:0d.0: PME# disabled
<7>[    0.634166] pci 0000:80:0f.0: [10de:0377] type 1 class 0x000604
<7>[    0.634205] pci 0000:80:0f.0: PME# supported from D0 D1 D2 D3hot D3cold
<7>[    0.634208] pci 0000:80:0f.0: PME# disabled
<6>[    0.634260] pci 0000:80:0a.0: PCI bridge to [bus 81-81]
<6>[    0.634295] pci 0000:80:0d.0: PCI bridge to [bus 82-82]
<6>[    0.634328] pci 0000:80:0f.0: PCI bridge to [bus 83-83]
<7>[    0.634346] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
<7>[    0.634387] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.XVR0._PRT]
<7>[    0.634410] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.XVR2._PRT]
<7>[    0.634438] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.XVR5._PRT]
<6>[    0.634458]  pci0000:80: Requesting ACPI _OSC control (0x1d)
<6>[    0.634461]  pci0000:80: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
<6>[    0.634463] ACPI _OSC control for PCIe not granted, disabling ASPM
<6>[    0.636848] ACPI: PCI Interrupt Link [LNK1] (IRQs 16 17 18 19 20 21 22 23) *11
<6>[    0.636926] ACPI: PCI Interrupt Link [LNK2] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
<6>[    0.636995] ACPI: PCI Interrupt Link [LNK3] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
<6>[    0.637064] ACPI: PCI Interrupt Link [LNK4] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
<6>[    0.637134] ACPI: PCI Interrupt Link [LK1E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
<6>[    0.637201] ACPI: PCI Interrupt Link [LK2E] (IRQs 16 17 18 19 20 21 22 23) *11
<6>[    0.637268] ACPI: PCI Interrupt Link [LK3E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
<6>[    0.637334] ACPI: PCI Interrupt Link [LK4E] (IRQs 16 17 18 19 20 21 22 23) *11
<6>[    0.637400] ACPI: PCI Interrupt Link [LSMB] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
<6>[    0.637467] ACPI: PCI Interrupt Link [LUS0] (IRQs 16 17 18 19 20 21 22 23) *10
<6>[    0.637534] ACPI: PCI Interrupt Link [LMA2] (IRQs 16 17 18 19 20 21 22 23) *10
<6>[    0.637600] ACPI: PCI Interrupt Link [LUS2] (IRQs 16 17 18 19 20 21 22 23) *11
<6>[    0.637668] ACPI: PCI Interrupt Link [LMAC] (IRQs 16 17 18 19 20 21 22 23) *11
<6>[    0.637734] ACPI: PCI Interrupt Link [LAZA] (IRQs 16 17 18 19 20 21 22 23) *10
<6>[    0.637800] ACPI: PCI Interrupt Link [LPID] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
<6>[    0.637867] ACPI: PCI Interrupt Link [LTID] (IRQs 16 17 18 19 20 21 22 23) *7
<6>[    0.637941] ACPI: PCI Interrupt Link [LSI1] (IRQs 16 17 18 19 20 21 22 23) *5
<6>[    0.638008] ACPI: PCI Interrupt Link [LSI2] (IRQs 16 17 18 19 20 21 22 23) *10
<6>[    0.638079] ACPI: PCI Interrupt Link [LK1E] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
<6>[    0.638151] ACPI: PCI Interrupt Link [LK2E] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
<6>[    0.638222] ACPI: PCI Interrupt Link [LK3E] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
<6>[    0.638293] ACPI: PCI Interrupt Link [LK4E] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
<6>[    0.638363] ACPI: PCI Interrupt Link [LUS0] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
<6>[    0.638434] ACPI: PCI Interrupt Link [LMA2] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
<6>[    0.638505] ACPI: PCI Interrupt Link [LUS2] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
<6>[    0.638575] ACPI: PCI Interrupt Link [LMAC] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
<6>[    0.638648] ACPI: PCI Interrupt Link [LPID] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
<6>[    0.638720] ACPI: PCI Interrupt Link [LTID] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
<6>[    0.638790] ACPI: PCI Interrupt Link [LSI1] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
<6>[    0.638871] ACPI: PCI Interrupt Link [LSI2] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
<6>[    0.638986] vgaarb: device added: PCI:0000:0b:00.0,decodes=io+mem,owns=io+mem,locks=none
<6>[    0.638986] vgaarb: loaded
<6>[    0.638986] vgaarb: bridge control possible 0000:0b:00.0
<4>[    0.639059] i2c-core: driver [aat2870] using legacy suspend method
<4>[    0.639061] i2c-core: driver [aat2870] using legacy resume method
<5>[    0.639138] SCSI subsystem initialized
<7>[    0.639167] libata version 3.00 loaded.
<6>[    0.639167] usbcore: registered new interface driver usbfs
<6>[    0.639167] usbcore: registered new interface driver hub
<6>[    0.639167] usbcore: registered new device driver usb
<6>[    0.639167] PCI: Using ACPI for IRQ routing
<7>[    0.642295] PCI: pci_cache_line_size set to 64 bytes
<7>[    0.642421] reserve RAM buffer: 000000000009bc00 - 000000000009ffff 
<7>[    0.642424] reserve RAM buffer: 00000000afde0000 - 00000000afffffff 
<6>[    0.642538] NetLabel: Initializing
<6>[    0.642540] NetLabel:  domain hash size = 128
<6>[    0.642542] NetLabel:  protocols = UNLABELED CIPSOv4
<6>[    0.642554] NetLabel:  unlabeled traffic allowed by default
<6>[    0.642574] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
<6>[    0.642574] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
<6>[    0.642574] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
<6>[    0.653074] Switching to clocksource hpet
<6>[    0.660567] AppArmor: AppArmor Filesystem Enabled
<6>[    0.660607] pnp: PnP ACPI init
<6>[    0.660628] ACPI: bus type pnp registered
<7>[    0.660733] pnp 00:00: [mem 0xffc00000-0xffffffff]
<7>[    0.660736] pnp 00:00: [mem 0xfec00000-0xfec00fff]
<7>[    0.660738] pnp 00:00: [mem 0xfee00000-0xfeefffff]
<7>[    0.660741] pnp 00:00: [mem 0xfed00000-0xfed00fff]
<6>[    0.660851] system 00:00: [mem 0xffc00000-0xffffffff] could not be reserved
<6>[    0.660854] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
<6>[    0.660857] system 00:00: [mem 0xfee00000-0xfeefffff] could not be reserved
<6>[    0.660860] system 00:00: [mem 0xfed00000-0xfed00fff] has been reserved
<7>[    0.660864] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
<7>[    0.660965] pnp 00:01: [bus 00-7f]
<7>[    0.660967] pnp 00:01: [io  0x0cf8-0x0cff]
<7>[    0.660970] pnp 00:01: [io  0x0000-0x03af window]
<7>[    0.660972] pnp 00:01: [io  0x03b0-0x03df window]
<7>[    0.660974] pnp 00:01: [io  0x03e0-0x0cf7 window]
<7>[    0.660976] pnp 00:01: [io  0x0d00-0x4fff window]
<7>[    0.660978] pnp 00:01: [mem 0x000a0000-0x000bffff window]
<7>[    0.660981] pnp 00:01: [mem 0x000c0000-0x000dffff window]
<7>[    0.660983] pnp 00:01: [mem 0xb0000000-0xc7ffffff window]
<7>[    0.661117] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
<7>[    0.661217] pnp 00:02: [irq 0 disabled]
<7>[    0.661232] pnp 00:02: [irq 8]
<7>[    0.661234] pnp 00:02: [mem 0xfed00000-0xfed003ff]
<7>[    0.661265] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
<7>[    0.661299] pnp 00:03: [mem 0xb8040000-0xb8047fff]
<6>[    0.661357] system 00:03: [mem 0xb8040000-0xb8047fff] has been reserved
<7>[    0.661360] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
<7>[    0.661524] pnp 00:04: [io  0x1000-0x107f]
<7>[    0.661527] pnp 00:04: [io  0x1080-0x10ff]
<7>[    0.661531] pnp 00:04: [io  0x1400-0x147f]
<7>[    0.661533] pnp 00:04: [io  0x1480-0x14ff]
<7>[    0.661535] pnp 00:04: [io  0x1800-0x187f]
<7>[    0.661537] pnp 00:04: [io  0x1880-0x18ff]
<7>[    0.661538] pnp 00:04: [io  0x2440-0x247f]
<7>[    0.661540] pnp 00:04: [io  0x2400-0x243f]
<6>[    0.661606] system 00:04: [io  0x1000-0x107f] has been reserved
<6>[    0.661609] system 00:04: [io  0x1080-0x10ff] has been reserved
<6>[    0.661612] system 00:04: [io  0x1400-0x147f] has been reserved
<6>[    0.661614] system 00:04: [io  0x1480-0x14ff] has been reserved
<6>[    0.661617] system 00:04: [io  0x1800-0x187f] has been reserved
<6>[    0.661619] system 00:04: [io  0x1880-0x18ff] has been reserved
<6>[    0.661621] system 00:04: [io  0x2440-0x247f] has been reserved
<6>[    0.661624] system 00:04: [io  0x2400-0x243f] has been reserved
<7>[    0.661627] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
<7>[    0.661636] pnp 00:05: [io  0x0060]
<7>[    0.661638] pnp 00:05: [io  0x0064]
<7>[    0.661645] pnp 00:05: [irq 1]
<7>[    0.661683] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
<7>[    0.661697] pnp 00:06: [irq 12]
<7>[    0.661733] pnp 00:06: Plug and Play ACPI device, IDs PNP0f13 (active)
<7>[    0.661744] pnp 00:07: [io  0x0010-0x001f]
<7>[    0.661746] pnp 00:07: [io  0x0022-0x003f]
<7>[    0.661748] pnp 00:07: [io  0x0044-0x005f]
<7>[    0.661749] pnp 00:07: [io  0x0062-0x0063]
<7>[    0.661751] pnp 00:07: [io  0x0065-0x006f]
<7>[    0.661753] pnp 00:07: [io  0x0072-0x0073]
<7>[    0.661755] pnp 00:07: [io  0x0074-0x007f]
<7>[    0.661757] pnp 00:07: [io  0x0091-0x0093]
<7>[    0.661758] pnp 00:07: [io  0x0097-0x009f]
<7>[    0.661760] pnp 00:07: [io  0x00a2-0x00bf]
<7>[    0.661762] pnp 00:07: [io  0x00e0-0x00ef]
<7>[    0.661764] pnp 00:07: [io  0x04d0-0x04d1]
<7>[    0.661766] pnp 00:07: [io  0x0080]
<7>[    0.661767] pnp 00:07: [io  0x0600-0x06fe]
<7>[    0.661769] pnp 00:07: [io  0x0c05-0x0c06]
<6>[    0.661845] system 00:07: [io  0x04d0-0x04d1] has been reserved
<6>[    0.661847] system 00:07: [io  0x0600-0x06fe] has been reserved
<6>[    0.661850] system 00:07: [io  0x0c05-0x0c06] has been reserved
<7>[    0.661853] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
<7>[    0.661866] pnp 00:08: [io  0x0000-0x0008]
<7>[    0.661868] pnp 00:08: [io  0x000a-0x000f]
<7>[    0.661870] pnp 00:08: [io  0x0081-0x0083]
<7>[    0.661872] pnp 00:08: [io  0x0087]
<7>[    0.661874] pnp 00:08: [io  0x0089-0x008b]
<7>[    0.661876] pnp 00:08: [io  0x008f]
<7>[    0.661877] pnp 00:08: [io  0x00c0-0x00d1]
<7>[    0.661879] pnp 00:08: [io  0x00d4-0x00df]
<7>[    0.661881] pnp 00:08: [dma 4]
<7>[    0.661911] pnp 00:08: Plug and Play ACPI device, IDs PNP0200 (active)
<7>[    0.661919] pnp 00:09: [io  0x0061]
<7>[    0.661951] pnp 00:09: Plug and Play ACPI device, IDs PNP0800 (active)
<7>[    0.661972] pnp 00:0a: [io  0x0070-0x0071]
<7>[    0.662020] pnp 00:0a: Plug and Play ACPI device, IDs PNP0b00 (active)
<7>[    0.662029] pnp 00:0b: [io  0x00f0-0x00f1]
<7>[    0.662037] pnp 00:0b: [irq 13]
<7>[    0.662068] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c04 (active)
<7>[    0.662202] pnp 00:0c: [io  0x03f8-0x03ff]
<7>[    0.662210] pnp 00:0c: [irq 4]
<7>[    0.662275] pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active)
<7>[    0.662404] pnp 00:0d: [io  0x02f8-0x02ff]
<7>[    0.662411] pnp 00:0d: [irq 3]
<7>[    0.662472] pnp 00:0d: Plug and Play ACPI device, IDs PNP0501 (active)
<7>[    0.662637] pnp 00:0e: [io  0x03f0-0x03f5]
<7>[    0.662639] pnp 00:0e: [io  0x03f7]
<7>[    0.662646] pnp 00:0e: [irq 6]
<7>[    0.662648] pnp 00:0e: [dma 2]
<7>[    0.662698] pnp 00:0e: Plug and Play ACPI device, IDs PNP0700 (active)
<7>[    0.662998] pnp 00:0f: [bus 80-ff]
<7>[    0.663000] pnp 00:0f: [io  0x0cf8-0x0cff]
<7>[    0.663016] pnp 00:0f: [io  0x5000-0xffff window]
<7>[    0.663018] pnp 00:0f: [io  0x03b0-0x03df window]
<7>[    0.663021] pnp 00:0f: [mem 0x000a0000-0x000bffff window]
<7>[    0.663023] pnp 00:0f: [mem 0x000c0000-0x000dffff window]
<7>[    0.663025] pnp 00:0f: [mem 0xc8000000-0xcfffffff window]
<7>[    0.663078] pnp 00:0f: Plug and Play ACPI device, IDs PNP0a03 (active)
<7>[    0.663113] pnp 00:10: [mem 0xc8040000-0xc8047fff]
<6>[    0.663183] system 00:10: [mem 0xc8040000-0xc8047fff] has been reserved
<7>[    0.663187] system 00:10: Plug and Play ACPI device, IDs PNP0c02 (active)
<7>[    0.663305] pnp 00:11: [io  0xf000-0xf07f]
<7>[    0.663307] pnp 00:11: [io  0xf080-0xf0ff]
<7>[    0.663309] pnp 00:11: [io  0xf400-0xf47f]
<7>[    0.663311] pnp 00:11: [io  0xf480-0xf4ff]
<7>[    0.663313] pnp 00:11: [io  0xf800-0xf87f]
<7>[    0.663315] pnp 00:11: [io  0xf880-0xf8ff]
<6>[    0.663386] system 00:11: [io  0xf000-0xf07f] has been reserved
<6>[    0.663389] system 00:11: [io  0xf080-0xf0ff] has been reserved
<6>[    0.663391] system 00:11: [io  0xf400-0xf47f] has been reserved
<6>[    0.663394] system 00:11: [io  0xf480-0xf4ff] has been reserved
<6>[    0.663396] system 00:11: [io  0xf800-0xf87f] has been reserved
<6>[    0.663399] system 00:11: [io  0xf880-0xf8ff] has been reserved
<7>[    0.663402] system 00:11: Plug and Play ACPI device, IDs PNP0c02 (active)
<6>[    0.663624] pnp: PnP ACPI: found 18 devices
<6>[    0.663626] ACPI: ACPI bus type pnp unregistered
<7>[    0.671034] PCI: max bus depth: 3 pci_try_num: 4
<6>[    0.671112] pci 0000:00:0a.0: BAR 15: assigned [mem 0xb0000000-0xb00fffff pref]
<6>[    0.671116] pci 0000:00:06.0: PCI bridge to [bus 01-01]
<6>[    0.671120] pci 0000:00:06.0:   bridge window [mem 0xb8100000-0xb81fffff]
<6>[    0.671126] pci 0000:02:00.0: BAR 15: assigned [mem 0xb0000000-0xb00fffff pref]
<6>[    0.671130] pci 0000:03:05.0: BAR 15: assigned [mem 0xb0000000-0xb00fffff pref]
<6>[    0.671133] pci 0000:03:01.0: PCI bridge to [bus 04-04]
<6>[    0.671137] pci 0000:03:01.0:   bridge window [mem 0xb8300000-0xb83fffff]
<6>[    0.671145] pci 0000:05:00.0: BAR 6: assigned [mem 0xb0000000-0xb000ffff pref]
<6>[    0.671148] pci 0000:03:05.0: PCI bridge to [bus 05-05]
<6>[    0.671151] pci 0000:03:05.0:   bridge window [io  0x3000-0x3fff]
<6>[    0.671156] pci 0000:03:05.0:   bridge window [mem 0xb8400000-0xb84fffff]
<6>[    0.671160] pci 0000:03:05.0:   bridge window [mem 0xb0000000-0xb00fffff pref]
<6>[    0.671165] pci 0000:03:07.0: PCI bridge to [bus 06-06]
<6>[    0.671175] pci 0000:03:09.0: PCI bridge to [bus 07-07]
<6>[    0.671184] pci 0000:02:00.0: PCI bridge to [bus 03-07]
<6>[    0.671187] pci 0000:02:00.0:   bridge window [io  0x3000-0x3fff]
<6>[    0.671192] pci 0000:02:00.0:   bridge window [mem 0xb8300000-0xb84fffff]
<6>[    0.671196] pci 0000:02:00.0:   bridge window [mem 0xb0000000-0xb00fffff pref]
<6>[    0.671201] pci 0000:00:0a.0: PCI bridge to [bus 02-07]
<6>[    0.671203] pci 0000:00:0a.0:   bridge window [io  0x3000-0x3fff]
<6>[    0.671207] pci 0000:00:0a.0:   bridge window [mem 0xb8200000-0xb84fffff]
<6>[    0.671210] pci 0000:00:0a.0:   bridge window [mem 0xb0000000-0xb00fffff pref]
<6>[    0.671214] pci 0000:08:00.0: PCI bridge to [bus 09-09]
<6>[    0.671225] pci 0000:08:00.1: PCI bridge to [bus 0a-0a]
<6>[    0.671238] pci 0000:00:0d.0: PCI bridge to [bus 08-0a]
<6>[    0.671242] pci 0000:00:0d.0:   bridge window [mem 0xb8500000-0xb85fffff]
<6>[    0.671248] pci 0000:0b:00.0: BAR 6: assigned [mem 0xb8620000-0xb863ffff pref]
<6>[    0.671250] pci 0000:00:0f.0: PCI bridge to [bus 0b-0b]
<6>[    0.671253] pci 0000:00:0f.0:   bridge window [io  0x4000-0x4fff]
<6>[    0.671256] pci 0000:00:0f.0:   bridge window [mem 0xb8600000-0xb86fffff]
<6>[    0.671259] pci 0000:00:0f.0:   bridge window [mem 0xc0000000-0xc7ffffff 64bit pref]
<6>[    0.671265] pci 0000:80:0a.0: PCI bridge to [bus 81-81]
<6>[    0.671271] pci 0000:80:0d.0: PCI bridge to [bus 82-82]
<6>[    0.671277] pci 0000:80:0f.0: PCI bridge to [bus 83-83]
<7>[    0.671289] pci 0000:00:06.0: setting latency timer to 64
<7>[    0.671295] pci 0000:00:0a.0: setting latency timer to 64
<4>[    0.671429] ACPI: PCI Interrupt Link [LK3E] enabled at IRQ 23
<6>[    0.671453] pci 0000:02:00.0: PCI INT A -> Link[LK3E] -> GSI 23 (level, low) -> IRQ 23
<7>[    0.671458] pci 0000:02:00.0: setting latency timer to 64
<4>[    0.671563] ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 22
<6>[    0.671575] pci 0000:03:01.0: PCI INT A -> Link[LK4E] -> GSI 22 (level, low) -> IRQ 22
<7>[    0.671579] pci 0000:03:01.0: setting latency timer to 64
<6>[    0.671586] pci 0000:03:05.0: PCI INT A -> Link[LK4E] -> GSI 22 (level, low) -> IRQ 22
<7>[    0.671590] pci 0000:03:05.0: setting latency timer to 64
<4>[    0.671691] ACPI: PCI Interrupt Link [LK2E] enabled at IRQ 21
<6>[    0.671703] pci 0000:03:07.0: PCI INT A -> Link[LK2E] -> GSI 21 (level, low) -> IRQ 21
<7>[    0.671707] pci 0000:03:07.0: setting latency timer to 64
<6>[    0.671714] pci 0000:03:09.0: PCI INT A -> Link[LK4E] -> GSI 22 (level, low) -> IRQ 22
<7>[    0.671718] pci 0000:03:09.0: setting latency timer to 64
<7>[    0.671724] pci 0000:00:0d.0: setting latency timer to 64
<7>[    0.671731] pci 0000:08:00.0: setting latency timer to 64
<6>[    0.671738] pci 0000:08:00.1: PCI INT A -> Link[LK4E] -> GSI 22 (level, low) -> IRQ 22
<7>[    0.671742] pci 0000:08:00.1: setting latency timer to 64
<7>[    0.671748] pci 0000:00:0f.0: setting latency timer to 64
<7>[    0.671753] pci 0000:80:0a.0: setting latency timer to 64
<7>[    0.671758] pci 0000:80:0d.0: setting latency timer to 64
<7>[    0.671763] pci 0000:80:0f.0: setting latency timer to 64
<7>[    0.671766] pci_bus 0000:00: resource 4 [io  0x0000-0x03af]
<7>[    0.671768] pci_bus 0000:00: resource 5 [io  0x03b0-0x03df]
<7>[    0.671771] pci_bus 0000:00: resource 6 [io  0x03e0-0x0cf7]
<7>[    0.671773] pci_bus 0000:00: resource 7 [io  0x0d00-0x4fff]
<7>[    0.671775] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
<7>[    0.671777] pci_bus 0000:00: resource 9 [mem 0xb0000000-0xc7ffffff]
<7>[    0.671780] pci_bus 0000:01: resource 1 [mem 0xb8100000-0xb81fffff]
<7>[    0.671783] pci_bus 0000:01: resource 4 [io  0x0000-0x03af]
<7>[    0.671785] pci_bus 0000:01: resource 5 [io  0x03b0-0x03df]
<7>[    0.671787] pci_bus 0000:01: resource 6 [io  0x03e0-0x0cf7]
<7>[    0.671790] pci_bus 0000:01: resource 7 [io  0x0d00-0x4fff]
<7>[    0.671792] pci_bus 0000:01: resource 8 [mem 0x000a0000-0x000bffff]
<7>[    0.671795] pci_bus 0000:01: resource 9 [mem 0xb0000000-0xc7ffffff]
<7>[    0.671798] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
<7>[    0.671800] pci_bus 0000:02: resource 1 [mem 0xb8200000-0xb84fffff]
<7>[    0.671803] pci_bus 0000:02: resource 2 [mem 0xb0000000-0xb00fffff pref]
<7>[    0.671805] pci_bus 0000:03: resource 0 [io  0x3000-0x3fff]
<7>[    0.671808] pci_bus 0000:03: resource 1 [mem 0xb8300000-0xb84fffff]
<7>[    0.671810] pci_bus 0000:03: resource 2 [mem 0xb0000000-0xb00fffff pref]
<7>[    0.671812] pci_bus 0000:04: resource 1 [mem 0xb8300000-0xb83fffff]
<7>[    0.671815] pci_bus 0000:05: resource 0 [io  0x3000-0x3fff]
<7>[    0.671817] pci_bus 0000:05: resource 1 [mem 0xb8400000-0xb84fffff]
<7>[    0.671819] pci_bus 0000:05: resource 2 [mem 0xb0000000-0xb00fffff pref]
<7>[    0.671822] pci_bus 0000:08: resource 1 [mem 0xb8500000-0xb85fffff]
<7>[    0.671825] pci_bus 0000:0b: resource 0 [io  0x4000-0x4fff]
<7>[    0.671828] pci_bus 0000:0b: resource 1 [mem 0xb8600000-0xb86fffff]
<7>[    0.671830] pci_bus 0000:0b: resource 2 [mem 0xc0000000-0xc7ffffff 64bit pref]
<7>[    0.671834] pci_bus 0000:80: resource 4 [io  0x5000-0xffff]
<7>[    0.671836] pci_bus 0000:80: resource 5 [io  0x03b0-0x03df]
<7>[    0.671838] pci_bus 0000:80: resource 6 [mem 0x000a0000-0x000bffff]
<7>[    0.671840] pci_bus 0000:80: resource 7 [mem 0xc8000000-0xcfffffff]
<6>[    0.671896] NET: Registered protocol family 2
<6>[    0.672142] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
<6>[    0.673654] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
<6>[    0.677108] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
<6>[    0.677526] TCP: Hash tables configured (established 524288 bind 65536)
<6>[    0.677529] TCP reno registered
<6>[    0.677546] UDP hash table entries: 4096 (order: 5, 131072 bytes)
<6>[    0.677618] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
<6>[    0.677807] NET: Registered protocol family 1
<4>[    0.678055] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 20
<6>[    0.678077] pci 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 20 (level, low) -> IRQ 20
<6>[    0.931050] pci 0000:00:02.0: PCI INT A disabled
<4>[    0.931241] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 19
<6>[    0.931267] pci 0000:00:02.1: PCI INT B -> Link[LUS2] -> GSI 19 (level, low) -> IRQ 19
<6>[    0.931313] pci 0000:00:02.1: PCI INT B disabled
<6>[    0.931415] pci 0000:00:00.0: Found enabled HT MSI Mapping
<6>[    0.931534] pci 0000:00:00.0: Found enabled HT MSI Mapping
<6>[    0.931612] pci 0000:00:00.0: Found enabled HT MSI Mapping
<6>[    0.931696] pci 0000:00:00.0: Found enabled HT MSI Mapping
<6>[    0.931742] pci 0000:04:00.0: PCI INT A -> Link[LK4E] -> GSI 22 (level, low) -> IRQ 22
<6>[    0.931783] pci 0000:04:00.0: PCI INT A disabled
<7>[    0.931796] pci 0000:0b:00.0: Boot video device
<6>[    0.931884] pci 0000:80:00.0: Found enabled HT MSI Mapping
<6>[    0.931939] pci 0000:80:00.0: Found enabled HT MSI Mapping
<6>[    0.932021] pci 0000:80:00.0: Found enabled HT MSI Mapping
<7>[    0.932025] PCI: CLS 64 bytes, default 64
<6>[    0.933175] PCI-DMA: Disabling AGP.
<6>[    0.933319] PCI-DMA: aperture base @ b4000000 size 65536 KB
<6>[    0.933322] init_memory_mapping: 00000000b4000000-00000000b8000000
<7>[    0.933325]  00b4000000 - 00b8000000 page 2M
<6>[    0.933332] PCI-DMA: using GART IOMMU.
<6>[    0.933336] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
<6>[    0.937996] Simple Boot Flag at 0x37 set to 0x80
<6>[    0.938670] IBS: LVT offset 1 assigned
<6>[    0.938696] perf: AMD IBS detected (0x00000007)
<6>[    0.938888] audit: initializing netlink socket (disabled)
<5>[    0.938913] type=2000 audit(1367125992.937:1): initialized
<6>[    0.956926] HugeTLB registered 2 MB page size, pre-allocated 0 pages
<5>[    0.960036] VFS: Disk quotas dquot_6.5.2
<4>[    0.960098] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
<6>[    0.960676] fuse init (API version 7.17)
<6>[    0.960774] msgmni has been set to 16047
<6>[    0.961319] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
<6>[    0.961363] io scheduler noop registered
<6>[    0.961365] io scheduler deadline registered
<6>[    0.961398] io scheduler cfq registered (default)
<7>[    0.961565] pcieport 0000:00:0a.0: setting latency timer to 64
<7>[    0.961599] pcieport 0000:00:0a.0: irq 64 for MSI/MSI-X
<7>[    0.961680] pcieport 0000:00:0d.0: setting latency timer to 64
<7>[    0.961704] pcieport 0000:00:0d.0: irq 65 for MSI/MSI-X
<7>[    0.961767] pcieport 0000:00:0f.0: setting latency timer to 64
<7>[    0.961792] pcieport 0000:00:0f.0: irq 66 for MSI/MSI-X
<7>[    0.961855] pcieport 0000:02:00.0: setting latency timer to 64
<7>[    0.961892] pcieport 0000:02:00.0: irq 67 for MSI/MSI-X
<7>[    0.961974] pcieport 0000:03:01.0: setting latency timer to 64
<7>[    0.962028] pcieport 0000:03:01.0: irq 68 for MSI/MSI-X
<7>[    0.962108] pcieport 0000:03:05.0: setting latency timer to 64
<7>[    0.962144] pcieport 0000:03:05.0: irq 69 for MSI/MSI-X
<7>[    0.962224] pcieport 0000:03:07.0: setting latency timer to 64
<7>[    0.962274] pcieport 0000:03:07.0: irq 70 for MSI/MSI-X
<7>[    0.962352] pcieport 0000:03:09.0: setting latency timer to 64
<7>[    0.962388] pcieport 0000:03:09.0: irq 71 for MSI/MSI-X
<7>[    0.962523] pcieport 0000:80:0a.0: setting latency timer to 64
<7>[    0.962578] pcieport 0000:80:0a.0: irq 72 for MSI/MSI-X
<7>[    0.962694] pcieport 0000:80:0d.0: setting latency timer to 64
<7>[    0.962719] pcieport 0000:80:0d.0: irq 73 for MSI/MSI-X
<7>[    0.962791] pcieport 0000:80:0f.0: setting latency timer to 64
<7>[    0.962817] pcieport 0000:80:0f.0: irq 74 for MSI/MSI-X
<6>[    0.962899] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
<6>[    0.962919] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
<6>[    0.963110] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
<6>[    0.963116] ACPI: Power Button [PWRB]
<6>[    0.963172] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
<6>[    0.963175] ACPI: Power Button [PWRF]
<6>[    0.965087] ERST: Table is not found!
<6>[    0.965089] GHES: HEST is not enabled!
<6>[    0.965169] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
<6>[    0.985738] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>[    1.023544] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
<6>[    1.213877] Freeing initrd memory: 21460k freed
<6>[    1.414752] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>[    1.443654] 00:0d: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
<6>[    1.452429] Linux agpgart interface v0.103
<6>[    1.454154] brd: module loaded
<6>[    1.455055] loop: module loaded
<7>[    1.455262] ahci 0000:05:00.0: version 3.0
<6>[    1.455278] ahci 0000:05:00.0: PCI INT A -> Link[LK4E] -> GSI 22 (level, low) -> IRQ 22
<7>[    1.455368] ahci 0000:05:00.0: irq 75 for MSI/MSI-X
<6>[    1.455436] ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
<6>[    1.455441] ahci 0000:05:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs 
<7>[    1.455446] ahci 0000:05:00.0: setting latency timer to 64
<6>[    1.455867] scsi0 : ahci
<6>[    1.455971] scsi1 : ahci
<6>[    1.456031] ata1: SATA max UDMA/133 abar m2048@0xb8400000 port 0xb8400100 irq 75
<6>[    1.456035] ata2: SATA max UDMA/133 abar m2048@0xb8400000 port 0xb8400180 irq 75
<7>[    1.456194] pata_acpi 0000:00:04.0: setting latency timer to 64
<4>[    1.456385] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 18
<6>[    1.456400] pata_acpi 0000:00:05.0: PCI INT A -> Link[LTID] -> GSI 18 (level, low) -> IRQ 18
<7>[    1.456418] pata_acpi 0000:00:05.0: setting latency timer to 64
<6>[    1.456424] pata_acpi 0000:00:05.0: PCI INT A disabled
<4>[    1.456570] ACPI: PCI Interrupt Link [LSI1] enabled at IRQ 17
<6>[    1.456582] pata_acpi 0000:00:05.1: PCI INT B -> Link[LSI1] -> GSI 17 (level, low) -> IRQ 17
<7>[    1.456595] pata_acpi 0000:00:05.1: setting latency timer to 64
<6>[    1.456601] pata_acpi 0000:00:05.1: PCI INT B disabled
<4>[    1.456764] ACPI: PCI Interrupt Link [LSI2] enabled at IRQ 16
<6>[    1.456776] pata_acpi 0000:00:05.2: PCI INT C -> Link[LSI2] -> GSI 16 (level, low) -> IRQ 16
<7>[    1.456789] pata_acpi 0000:00:05.2: setting latency timer to 64
<6>[    1.456801] pata_acpi 0000:00:05.2: PCI INT C disabled
<6>[    1.457207] Fixed MDIO Bus: probed
<6>[    1.457227] tun: Universal TUN/TAP device driver, 1.6
<6>[    1.457229] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
<6>[    1.457289] PPP generic driver version 2.4.2
<6>[    1.457427] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[    1.457449] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUS2] -> GSI 19 (level, low) -> IRQ 19
<7>[    1.457462] ehci_hcd 0000:00:02.1: setting latency timer to 64
<6>[    1.457465] ehci_hcd 0000:00:02.1: EHCI Host Controller
<6>[    1.457535] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
<6>[    1.457559] ehci_hcd 0000:00:02.1: debug port 1
<7>[    1.457566] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
<6>[    1.457618] ehci_hcd 0000:00:02.1: irq 19, io mem 0xb8005000
<6>[    1.463025] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
<6>[    1.463208] hub 1-0:1.0: USB hub found
<6>[    1.463213] hub 1-0:1.0: 10 ports detected
<6>[    1.463339] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<6>[    1.463359] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 20 (level, low) -> IRQ 20
<7>[    1.463372] ohci_hcd 0000:00:02.0: setting latency timer to 64
<6>[    1.463377] ohci_hcd 0000:00:02.0: OHCI Host Controller
<6>[    1.463424] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
<6>[    1.463482] ohci_hcd 0000:00:02.0: irq 20, io mem 0xb8004000
<6>[    1.516157] hub 2-0:1.0: USB hub found
<6>[    1.516162] hub 2-0:1.0: 10 ports detected
<6>[    1.516271] uhci_hcd: USB Universal Host Controller Interface driver
<6>[    1.516320] xhci_hcd 0000:04:00.0: PCI INT A -> Link[LK4E] -> GSI 22 (level, low) -> IRQ 22
<7>[    1.516334] xhci_hcd 0000:04:00.0: setting latency timer to 64
<6>[    1.516339] xhci_hcd 0000:04:00.0: xHCI Host Controller
<6>[    1.516388] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
<6>[    1.516602] xhci_hcd 0000:04:00.0: irq 22, io mem 0xb8300000
<7>[    1.516732] xhci_hcd 0000:04:00.0: irq 76 for MSI/MSI-X
<7>[    1.516739] xhci_hcd 0000:04:00.0: irq 77 for MSI/MSI-X
<7>[    1.516745] xhci_hcd 0000:04:00.0: irq 78 for MSI/MSI-X
<7>[    1.516754] xhci_hcd 0000:04:00.0: irq 79 for MSI/MSI-X
<7>[    1.516760] xhci_hcd 0000:04:00.0: irq 80 for MSI/MSI-X
<7>[    1.516767] xhci_hcd 0000:04:00.0: irq 81 for MSI/MSI-X
<7>[    1.516772] xhci_hcd 0000:04:00.0: irq 82 for MSI/MSI-X
<7>[    1.516777] xhci_hcd 0000:04:00.0: irq 83 for MSI/MSI-X
<7>[    1.517271] xHCI xhci_add_endpoint called for root hub
<7>[    1.517273] xHCI xhci_check_bandwidth called for root hub
<6>[    1.517297] hub 3-0:1.0: USB hub found
<6>[    1.517304] hub 3-0:1.0: 2 ports detected
<6>[    1.517381] xhci_hcd 0000:04:00.0: xHCI Host Controller
<6>[    1.517424] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
<7>[    1.519956] xHCI xhci_add_endpoint called for root hub
<7>[    1.519958] xHCI xhci_check_bandwidth called for root hub
<6>[    1.519982] hub 4-0:1.0: USB hub found
<6>[    1.519988] hub 4-0:1.0: 2 ports detected
<6>[    1.534079] usbcore: registered new interface driver libusual
<6>[    1.534133] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
<6>[    1.537375] serio: i8042 KBD port at 0x60,0x64 irq 1
<6>[    1.537393] serio: i8042 AUX port at 0x60,0x64 irq 12
<6>[    1.537577] mousedev: PS/2 mouse device common for all mice
<6>[    1.537758] rtc_cmos 00:0a: RTC can wake from S4
<6>[    1.537941] rtc_cmos 00:0a: rtc core: registered rtc_cmos as rtc0
<6>[    1.538054] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
<6>[    1.538164] device-mapper: uevent: version 1.0.3
<6>[    1.538243] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
<6>[    1.538255] cpuidle: using governor ladder
<6>[    1.538257] cpuidle: using governor menu
<6>[    1.538259] EFI Variables Facility v0.08 2004-May-17
<6>[    1.538625] TCP cubic registered
<6>[    1.538741] NET: Registered protocol family 10
<6>[    1.539337] NET: Registered protocol family 17
<5>[    1.539342] Registering the dns_resolver key type
<7>[    1.539494] PM: Hibernation image not present or could not be loaded.
<6>[    1.539508] registered taskstats version 1
<6>[    1.548593]   Magic number: 9:786:214
<6>[    1.548794] rtc_cmos 00:0a: setting system clock to 2013-04-28 05:13:14 UTC (1367125994)
<6>[    1.548829] powernow-k8: Found 2 Quad-Core AMD Opteron(tm) Processor 2356 (8 cpu cores) (version 2.20.00)
<6>[    1.548880] powernow-k8:    0 : pstate 0 (2300 MHz)
<6>[    1.548882] powernow-k8:    1 : pstate 1 (2000 MHz)
<6>[    1.548883] powernow-k8:    2 : pstate 2 (1700 MHz)
<6>[    1.548885] powernow-k8:    3 : pstate 3 (1400 MHz)
<6>[    1.548887] powernow-k8:    4 : pstate 4 (1150 MHz)
<6>[    1.549309] powernow-k8:    0 : pstate 0 (2300 MHz)
<6>[    1.549311] powernow-k8:    1 : pstate 1 (2000 MHz)
<6>[    1.549313] powernow-k8:    2 : pstate 2 (1700 MHz)
<6>[    1.549315] powernow-k8:    3 : pstate 3 (1400 MHz)
<6>[    1.549316] powernow-k8:    4 : pstate 4 (1150 MHz)
<6>[    1.549652] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
<6>[    1.549654] EDD information not available.
<6>[    1.558319] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
<6>[    1.761084] ata2: SATA link down (SStatus 0 SControl 330)
<6>[    1.816060] usb 1-7: new high-speed USB device number 3 using ehci_hcd
<6>[    1.916068] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
<6>[    1.928024] ata1.00: ATA-8: KINGSTON SVP200S37A60G, 502ABBF0, max UDMA/133
<6>[    1.928028] ata1.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
<6>[    1.937921] ata1.00: configured for UDMA/133
<5>[    1.938109] scsi 0:0:0:0: Direct-Access     ATA      KINGSTON SVP200S 502A PQ: 0 ANSI: 5
<5>[    1.938298] sd 0:0:0:0: Attached scsi generic sg0 type 0
<5>[    1.938348] sd 0:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
<5>[    1.938571] sd 0:0:0:0: [sda] Write Protect is off
<7>[    1.938575] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>[    1.938625] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6>[    1.939342]  sda: sda1 sda4
<5>[    1.939763] sd 0:0:0:0: [sda] Attached SCSI disk
<6>[    1.940043] Refined TSC clocksource calibration: 2299.999 MHz.
<6>[    1.940049] Switching to clocksource tsc
<6>[    1.941277] Freeing unused kernel memory: 868k freed
<6>[    1.941601] Write protecting the kernel read-only data: 12288k
<6>[    1.946891] Freeing unused kernel memory: 1540k freed
<6>[    1.951554] Freeing unused kernel memory: 1212k freed
<30>[    1.973134] udevd[138]: starting version 175
<7>[    1.993714] sata_nv 0000:00:05.0: version 3.5
<6>[    1.993740] sata_nv 0000:00:05.0: PCI INT A -> Link[LTID] -> GSI 18 (level, low) -> IRQ 18
<5>[    1.993743] sata_nv 0000:00:05.0: Using SWNCQ mode
<7>[    1.993965] sata_nv 0000:00:05.0: setting latency timer to 64
<6>[    1.996409] scsi2 : sata_nv
<6>[    1.996501] scsi3 : sata_nv
<6>[    1.996648] ata3: SATA max UDMA/133 cmd 0x24d0 ctl 0x24c4 bmdma 0x2490 irq 18
<6>[    1.996651] ata4: SATA max UDMA/133 cmd 0x24c8 ctl 0x24c0 bmdma 0x2498 irq 18
<6>[    1.996732] sata_nv 0000:00:05.1: PCI INT B -> Link[LSI1] -> GSI 17 (level, low) -> IRQ 17
<5>[    1.996736] sata_nv 0000:00:05.1: Using SWNCQ mode
<7>[    1.996952] sata_nv 0000:00:05.1: setting latency timer to 64
<6>[    1.999734] scsi4 : sata_nv
<6>[    1.999870] scsi5 : sata_nv
<6>[    2.000048] ata5: SATA max UDMA/133 cmd 0x24e8 ctl 0x24dc bmdma 0x24a0 irq 17
<6>[    2.000051] ata6: SATA max UDMA/133 cmd 0x24e0 ctl 0x24d8 bmdma 0x24a8 irq 17
<6>[    2.000178] sata_nv 0000:00:05.2: PCI INT C -> Link[LSI2] -> GSI 16 (level, low) -> IRQ 16
<5>[    2.000182] sata_nv 0000:00:05.2: Using SWNCQ mode
<7>[    2.000405] sata_nv 0000:00:05.2: setting latency timer to 64
<6>[    2.005061] scsi6 : sata_nv
<6>[    2.005735] scsi7 : sata_nv
<6>[    2.005909] ata7: SATA max UDMA/133 cmd 0x2800 ctl 0x24f4 bmdma 0x24b0 irq 16
<6>[    2.005913] ata8: SATA max UDMA/133 cmd 0x24f8 ctl 0x24f0 bmdma 0x24b8 irq 16
<7>[    2.005992] pata_amd 0000:00:04.0: version 0.4.1
<7>[    2.006065] pata_amd 0000:00:04.0: setting latency timer to 64
<6>[    2.007065] scsi8 : pata_amd
<6>[    2.007292] scsi9 : pata_amd
<6>[    2.007725] ata9: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x2480 irq 14
<6>[    2.007728] ata10: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x2488 irq 15
<6>[    2.017701] Floppy drive(s): fd0 is 1.44M
<6>[    2.020975] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
<4>[    2.021188] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
<6>[    2.021195] forcedeth 0000:00:08.0: PCI INT A -> Link[LMAC] -> GSI 23 (level, low) -> IRQ 23
<7>[    2.021202] forcedeth 0000:00:08.0: setting latency timer to 64
<6>[    2.032220] FDC 0 is a post-1991 82077
<6>[    2.161368] ata9.00: ATAPI: HL-DT-ST DVDRAM GSA-H42N, RL00, max UDMA/66
<7>[    2.161380] ata9: nv_mode_filter: 0x1f39f&0x739f->0x739f, BIOS=0x7000 (0xc000c700) ACPI=0x701f (60:600:0x13)
<6>[    2.167315] ata9.00: configured for UDMA/33
<6>[    2.300032] ata3: SATA link down (SStatus 0 SControl 300)
<6>[    2.454041] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>[    2.457387] ata5.00: ATA-8: WDC WD5000AADS-00S9B0, 01.00A01, max UDMA/133
<6>[    2.457392] ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
<6>[    2.460041] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>[    2.460326] ata5.00: configured for UDMA/133
<6>[    2.463333] ata7.00: ATA-8: WDC WD5000AADS-00S9B0, 01.00A01, max UDMA/133
<6>[    2.463338] ata7.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
<6>[    2.467045] ata7.00: configured for UDMA/133
<6>[    2.544729] forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x5043 @ 0, addr 00:e0:81:b1:66:70
<6>[    2.544735] forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
<4>[    2.544980] ACPI: PCI Interrupt Link [LMA2] enabled at IRQ 22
<6>[    2.544985] forcedeth 0000:00:09.0: PCI INT A -> Link[LMA2] -> GSI 22 (level, low) -> IRQ 22
<7>[    2.544990] forcedeth 0000:00:09.0: setting latency timer to 64
<6>[    2.563030] usb 2-5: new low-speed USB device number 2 using ohci_hcd
<6>[    2.755039] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>[    2.758322] ata4.00: ATA-8: WDC WD5000AADS-00S9B0, 01.00A01, max UDMA/133
<6>[    2.758326] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
<6>[    2.764342] ata4.00: configured for UDMA/133
<5>[    2.764531] scsi 3:0:0:0: Direct-Access     ATA      WDC WD5000AADS-0 01.0 PQ: 0 ANSI: 5
<5>[    2.764720] sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
<5>[    2.764725] sd 3:0:0:0: Attached scsi generic sg1 type 0
<5>[    2.764833] sd 3:0:0:0: [sdb] Write Protect is off
<7>[    2.764837] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
<5>[    2.764882] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<5>[    2.764944] scsi 4:0:0:0: Direct-Access     ATA      WDC WD5000AADS-0 01.0 PQ: 0 ANSI: 5
<5>[    2.765176] sd 4:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
<5>[    2.765201] sd 4:0:0:0: Attached scsi generic sg2 type 0
<5>[    2.765233] sd 4:0:0:0: [sdc] Write Protect is off
<7>[    2.765237] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
<5>[    2.765270] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6>[    2.783457]  sdb: sdb1
<5>[    2.783760] sd 3:0:0:0: [sdb] Attached SCSI disk
<6>[    2.785019]  sdc: sdc1
<5>[    2.785321] sd 4:0:0:0: [sdc] Attached SCSI disk
<6>[    2.917352] md: bind<sdc1>
<6>[    3.022033] usb 2-8: new full-speed USB device number 3 using ohci_hcd
<6>[    3.066735] forcedeth 0000:00:09.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:e0:81:b1:66:71
<6>[    3.066739] forcedeth 0000:00:09.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
<6>[    3.219043] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>[    3.221109] hub 2-8:1.0: USB hub found
<6>[    3.222480] ata6.00: ATA-8: WDC WD5000AADS-00S9B0, 01.00A01, max UDMA/133
<6>[    3.222484] ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
<6>[    3.224073] hub 2-8:1.0: 4 ports detected
<6>[    3.228486] ata6.00: configured for UDMA/133
<5>[    3.228572] scsi 5:0:0:0: Direct-Access     ATA      WDC WD5000AADS-0 01.0 PQ: 0 ANSI: 5
<5>[    3.228729] sd 5:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/465 GiB)
<5>[    3.228733] sd 5:0:0:0: Attached scsi generic sg3 type 0
<5>[    3.228852] sd 5:0:0:0: [sdd] Write Protect is off
<7>[    3.228855] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
<5>[    3.228920] scsi 6:0:0:0: Direct-Access     ATA      WDC WD5000AADS-0 01.0 PQ: 0 ANSI: 5
<5>[    3.228930] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<5>[    3.229186] sd 6:0:0:0: [sde] 976773168 512-byte logical blocks: (500 GB/465 GiB)
<5>[    3.229229] sd 6:0:0:0: Attached scsi generic sg4 type 0
<5>[    3.229286] sd 6:0:0:0: [sde] Write Protect is off
<7>[    3.229290] sd 6:0:0:0: [sde] Mode Sense: 00 3a 00 00
<5>[    3.229333] sd 6:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6>[    3.243840]  sde: sde1
<5>[    3.244131] sd 6:0:0:0: [sde] Attached SCSI disk
<6>[    3.249527]  sdd: sdd1
<5>[    3.249849] sd 5:0:0:0: [sdd] Attached SCSI disk
<6>[    3.368731] md: bind<sde1>
<6>[    3.373021] md: bind<sdd1>
<6>[    3.503031] usb 2-9: new low-speed USB device number 4 using ohci_hcd
<6>[    3.532035] ata8: SATA link down (SStatus 0 SControl 300)
<5>[    3.535495] scsi 8:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-H42N  RL00 PQ: 0 ANSI: 5
<4>[    3.541209] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
<6>[    3.541212] cdrom: Uniform CD-ROM driver Revision: 3.20
<7>[    3.541351] sr 8:0:0:0: Attached scsi CD-ROM sr0
<5>[    3.541450] sr 8:0:0:0: Attached scsi generic sg5 type 5
<7>[    3.541568] ata10: port disabled--ignoring
<4>[    3.543685] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 21
<6>[    3.543692] firewire_ohci 0000:01:05.0: PCI INT A -> Link[LNK1] -> GSI 21 (level, low) -> IRQ 21
<6>[    3.544530] [drm] Initialized drm 1.1.0 20060810
<6>[    3.551595] [drm] radeon defaulting to kernel modesetting.
<6>[    3.551599] [drm] radeon kernel modesetting enabled.
<6>[    3.551721] radeon 0000:0b:00.0: PCI INT A -> Link[LK2E] -> GSI 21 (level, low) -> IRQ 21
<7>[    3.551728] radeon 0000:0b:00.0: setting latency timer to 64
<6>[    3.551949] [drm] initializing kernel modesetting (RV380 0x1002:0x5B63 0x0001:0x0001).
<6>[    3.551984] [drm] register mmio base: 0xB8600000
<6>[    3.551986] [drm] register mmio size: 65536
<6>[    3.552135] [drm] Generation 2 PCI interface, using max accessible memory
<6>[    3.552140] radeon 0000:0b:00.0: VRAM: 128M 0x00000000C0000000 - 0x00000000C7FFFFFF (128M used)
<6>[    3.552143] radeon 0000:0b:00.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
<6>[    3.552151] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
<6>[    3.552153] [drm] Driver supports precise vblank timestamp query.
<7>[    3.552198] radeon 0000:0b:00.0: irq 84 for MSI/MSI-X
<6>[    3.552203] radeon 0000:0b:00.0: radeon: using MSI.
<6>[    3.552256] [drm] radeon: irq initialized.
<6>[    3.556287] [drm] Detected VRAM RAM=128M, BAR=128M
<6>[    3.556291] [drm] RAM width 64bits DDR
<6>[    3.556401] [TTM] Zone  kernel: Available graphics memory: 4120810 kiB.
<6>[    3.556403] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB.
<6>[    3.556405] [TTM] Initializing pool allocator.
<6>[    3.556439] [drm] radeon: 128M of VRAM memory ready
<6>[    3.556441] [drm] radeon: 512M of GTT memory ready.
<6>[    3.556470] [drm] GART: num cpu pages 131072, num gpu pages 131072
<6>[    3.557362] [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
<6>[    3.557433] input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:02.0/usb2/2-5/2-5:1.0/input/input3
<6>[    3.557579] generic-usb 0003:046D:C50E.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:02.0-5/input0
<6>[    3.557609] usbcore: registered new interface driver usbhid
<6>[    3.557611] usbhid: USB HID core driver
<6>[    3.558568] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
<6>[    3.558594] radeon 0000:0b:00.0: WB enabled
<6>[    3.558670] [drm] Loading R300 Microcode
<6>[    3.560607] [drm] radeon: ring at 0x00000000A0001000
<6>[    3.560627] [drm] ring test succeeded in 1 usecs
<6>[    3.560728] [drm] radeon: ib pool ready.
<6>[    3.560792] [drm] ib test succeeded in 0 usecs
<6>[    3.561039] [drm] Radeon Display Connectors
<6>[    3.561041] [drm] Connector 0:
<6>[    3.561042] [drm]   VGA
<6>[    3.561045] [drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
<6>[    3.561046] [drm]   Encoders:
<6>[    3.561048] [drm]     CRT1: INTERNAL_DAC1
<6>[    3.561049] [drm] Connector 1:
<6>[    3.561050] [drm]   DVI-I
<6>[    3.561052] [drm]   HPD1
<6>[    3.561053] [drm]   DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
<6>[    3.561055] [drm]   Encoders:
<6>[    3.561056] [drm]     CRT2: INTERNAL_DAC2
<6>[    3.561058] [drm]     DFP1: INTERNAL_TMDS1
<6>[    3.561059] [drm] Connector 2:
<6>[    3.561060] [drm]   S-video
<6>[    3.561061] [drm]   Encoders:
<6>[    3.561063] [drm]     TV1: INTERNAL_DAC2
<5>[    3.594110] firewire_ohci: Added fw-ohci device 0000:01:05.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
<6>[    3.616391] md: bind<sdb1>
<6>[    3.619306] async_tx: api initialized (async)
<4>[    3.636060] raid6: int64x1   1957 MB/s
<6>[    3.640662] [drm] fb mappable at 0xC00C0000
<6>[    3.640664] [drm] vram apper at 0xC0000000
<6>[    3.640666] [drm] size 8294400
<6>[    3.640667] [drm] fb depth is 24
<6>[    3.640669] [drm]    pitch is 7680
<6>[    3.640740] fbcon: radeondrmfb (fb0) is primary device
<6>[    3.640824] Console: switching to colour frame buffer device 240x67
<6>[    3.640864] fb0: radeondrmfb frame buffer device
<6>[    3.640865] drm: registered panic notifier
<6>[    3.640872] [drm] Initialized radeon 2.12.0 20080528 for 0000:0b:00.0 on minor 0
<4>[    3.653050] raid6: int64x2   2808 MB/s
<4>[    3.670044] raid6: int64x4   1992 MB/s
<4>[    3.687027] raid6: int64x8   1777 MB/s
<4>[    3.704040] raid6: sse2x1    3347 MB/s
<4>[    3.721029] raid6: sse2x2    5277 MB/s
<4>[    3.738026] raid6: sse2x4    5718 MB/s
<4>[    3.738028] raid6: using algorithm sse2x4 (5718 MB/s)
<6>[    3.738577] xor: automatically using best checksumming function: generic_sse
<6>[    3.743004]    generic_sse:  8968.000 MB/sec
<6>[    3.743006] xor: using function: generic_sse (8968.000 MB/sec)
<6>[    3.743927] md: raid6 personality registered for level 6
<6>[    3.743929] md: raid5 personality registered for level 5
<6>[    3.743931] md: raid4 personality registered for level 4
<6>[    3.744122] bio: create slab <bio-1> at 1
<6>[    3.744141] md/raid:md1: device sdb1 operational as raid disk 0
<6>[    3.744144] md/raid:md1: device sdd1 operational as raid disk 2
<6>[    3.744146] md/raid:md1: device sde1 operational as raid disk 3
<6>[    3.744148] md/raid:md1: device sdc1 operational as raid disk 1
<6>[    3.744514] md/raid:md1: allocated 4280kB
<6>[    3.744554] md/raid:md1: raid level 5 active with 4 out of 4 devices, algorithm 2
<7>[    3.744556] RAID conf printout:
<7>[    3.744558]  --- level:5 rd:4 wd:4
<7>[    3.744560]  disk 0, o:1, dev:sdb1
<7>[    3.744561]  disk 1, o:1, dev:sdc1
<7>[    3.744563]  disk 2, o:1, dev:sdd1
<7>[    3.744564]  disk 3, o:1, dev:sde1
<6>[    3.744596] md1: detected capacity change from 0 to 1500317024256
<6>[    3.746593]  md1: unknown partition table
<6>[    3.775338] input: MOSART Semi. Wireless Keyboard & Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-9/2-9:1.0/input/input4
<6>[    3.775438] generic-usb 0003:062A:0102.0002: input,hidraw1: USB HID v1.10 Keyboard [MOSART Semi. Wireless Keyboard & Mouse] on usb-0000:00:02.0-9/input0
<6>[    3.786539] input: MOSART Semi. Wireless Keyboard & Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-9/2-9:1.1/input/input5
<6>[    3.786706] generic-usb 0003:062A:0102.0003: input,hiddev0,hidraw2: USB HID v1.10 Mouse [MOSART Semi. Wireless Keyboard & Mouse] on usb-0000:00:02.0-9/input1
<5>[    4.141152] firewire_core: created device fw0: GUID 00e0810000283c52, S400
<6>[    4.967715] md: linear personality registered for level -1
<6>[    4.969560] md: multipath personality registered for level -4
<6>[    4.971358] md: raid0 personality registered for level 0
<6>[    4.973620] md: raid1 personality registered for level 1
<6>[    4.981033] md: raid10 personality registered for level 10
<6>[    5.075620] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
<6>[    5.327126] Adding 8283024k swap on /dev/sda4.  Priority:-1 extents:1 across:8283024k SS
<6>[    5.475465] EXT4-fs (sda1): re-mounted. Opts: discard,errors=remount-ro
<4>[    5.575073] init: portmap-wait (statd) main process (700) killed by TERM signal
<4>[    5.582582] init: statd-mounting main process (685) killed by TERM signal
<6>[    5.590511] RPC: Registered named UNIX socket transport module.
<6>[    5.590517] RPC: Registered udp transport module.
<6>[    5.590519] RPC: Registered tcp transport module.
<6>[    5.590521] RPC: Registered tcp NFSv4.1 backchannel transport module.
<5>[    5.592452] FS-Cache: Loaded
<5>[    5.597789] FS-Cache: Netfs 'nfs' registered for caching
<6>[    5.793632] EXT4-fs (md1): mounted filesystem with ordered data mode. Opts: (null)
<6>[    6.396513] ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>[    6.396521] ADDRCONF(NETDEV_UP): eth1: link is not ready
<6>[    6.405903] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
<4>[    6.416147] init: flush-early-job-log main process (760) terminated with status 1
<6>[    6.434670] Bluetooth: Core ver 2.16
<6>[    6.434693] NET: Registered protocol family 31
<6>[    6.434695] Bluetooth: HCI device and connection manager initialized
<6>[    6.434699] Bluetooth: HCI socket layer initialized
<6>[    6.434701] Bluetooth: L2CAP socket layer initialized
<6>[    6.434708] Bluetooth: SCO socket layer initialized
<6>[    6.436472] Bluetooth: RFCOMM TTY layer initialized
<6>[    6.436478] Bluetooth: RFCOMM socket layer initialized
<6>[    6.436480] Bluetooth: RFCOMM ver 1.11
<30>[    6.575573] udevd[789]: starting version 175
<6>[    6.585013] lp: driver loaded but no devices found
<6>[    6.596466] ppdev: user-space parallel port driver
<6>[    6.603155] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[    6.603160] Bluetooth: BNEP filters: protocol multicast
<5>[    6.612425] type=1400 audit(1367125999.562:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=816 comm="apparmor_parser"
<5>[    6.613159] type=1400 audit(1367125999.563:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=816 comm="apparmor_parser"
<6>[    6.614633] i2c i2c-3: nForce2 SMBus adapter at 0x2440
<6>[    6.614664] i2c i2c-4: nForce2 SMBus adapter at 0x2400
<6>[    6.615153] i2c i2c-5: nForce2 SMBus adapter at 0x5440
<6>[    6.615193] i2c i2c-6: nForce2 SMBus adapter at 0x5400
<6>[    6.615593] NV_TCO: NV TCO WatchDog Timer Driver v0.01
<6>[    6.615699] NV_TCO: Watchdog reboot not detected.
<6>[    6.615771] NV_TCO: initialized (0x1440). heartbeat=30 sec (nowayout=0)
<6>[    6.711790] MCE: In-kernel MCE decoding enabled.
<3>[    6.712162] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
<6>[    6.712850] EDAC MC: Ver: 2.1.0
<3>[    6.713441] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
<6>[    6.713714] AMD64 EDAC driver v3.4.0
<6>[    6.713935] EDAC amd64: DRAM ECC enabled.
<6>[    6.713946] EDAC amd64: F10h detected (node 0).
<7>[    6.713989] EDAC MC: DCT0 chip selects:
<6>[    6.713992] EDAC amd64: MC: 0:  1024MB 1:     0MB
<6>[    6.713994] EDAC amd64: MC: 2:  1024MB 3:     0MB
<6>[    6.713995] EDAC amd64: MC: 4:     0MB 5:     0MB
<6>[    6.713997] EDAC amd64: MC: 6:     0MB 7:     0MB
<7>[    6.714021] EDAC MC: DCT1 chip selects:
<6>[    6.714023] EDAC amd64: MC: 0:  1024MB 1:     0MB
<6>[    6.714024] EDAC amd64: MC: 2:  1024MB 3:     0MB
<6>[    6.714026] EDAC amd64: MC: 4:     0MB 5:     0MB
<6>[    6.714028] EDAC amd64: MC: 6:     0MB 7:     0MB
<6>[    6.714030] EDAC amd64: using x4 syndromes.
<6>[    6.714031] EDAC amd64: MCT channel count: 2
<6>[    6.714068] EDAC amd64: CS0: Registered DDR2 RAM
<6>[    6.714070] EDAC amd64: CS2: Registered DDR2 RAM
<6>[    6.714102] EDAC MC0: Giving out device to 'amd64_edac' 'F10h': DEV 0000:00:18.2
<6>[    6.715587] EDAC amd64: DRAM ECC enabled.
<6>[    6.715607] EDAC amd64: F10h detected (node 1).
<7>[    6.715648] EDAC MC: DCT0 chip selects:
<6>[    6.715651] EDAC amd64: MC: 0:  1024MB 1:     0MB
<6>[    6.715653] EDAC amd64: MC: 2:  1024MB 3:     0MB
<6>[    6.715655] EDAC amd64: MC: 4:     0MB 5:     0MB
<6>[    6.715657] EDAC amd64: MC: 6:     0MB 7:     0MB
<7>[    6.715658] EDAC MC: DCT1 chip selects:
<6>[    6.715660] EDAC amd64: MC: 0:  1024MB 1:     0MB
<6>[    6.715662] EDAC amd64: MC: 2:  1024MB 3:     0MB
<6>[    6.715664] EDAC amd64: MC: 4:     0MB 5:     0MB
<6>[    6.715665] EDAC amd64: MC: 6:     0MB 7:     0MB
<6>[    6.715667] EDAC amd64: using x4 syndromes.
<6>[    6.715669] EDAC amd64: MCT channel count: 2
<6>[    6.715711] EDAC amd64: CS0: Registered DDR2 RAM
<6>[    6.715713] EDAC amd64: CS2: Registered DDR2 RAM
<6>[    6.715755] EDAC MC1: Giving out device to 'amd64_edac' 'F10h': DEV 0000:00:19.2
<6>[    6.715866] EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED)
<6>[    6.724160] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
<5>[    6.736017] type=1400 audit(1367125999.685:4): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=1079 comm="apparmor_parser"
<5>[    6.736579] type=1400 audit(1367125999.686:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1079 comm="apparmor_parser"
<5>[    6.736869] type=1400 audit(1367125999.686:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=1079 comm="apparmor_parser"
<6>[    6.775421] Linux video capture interface: v2.00
<6>[    6.776251] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0825)
<6>[    6.790221] input: UVC Camera (046d:0825) as /devices/pci0000:00/0000:00:02.1/usb1/1-7/1-7:1.0/input/input6
<6>[    6.790376] usbcore: registered new interface driver uvcvideo
<6>[    6.790378] USB Video Class driver (1.1.1)
<4>[    6.805120] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 20
<6>[    6.805129] snd_hda_intel 0000:00:06.1: PCI INT B -> Link[LAZA] -> GSI 20 (level, low) -> IRQ 20
<6>[    6.805132] hda_intel: Disabling MSI
<7>[    6.805236] snd_hda_intel 0000:00:06.1: setting latency timer to 64
<4>[    6.845437] init: failsafe main process (1247) killed by TERM signal
<5>[    6.915906] type=1400 audit(1367125999.865:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1341 comm="apparmor_parser"
<5>[    6.916098] type=1400 audit(1367125999.866:8): apparmor="STATUS" operation="profile_load" name="/usr/bin/freshclam" pid=1345 comm="apparmor_parser"
<5>[    6.916491] type=1400 audit(1367125999.866:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-digikam" pid=1348 comm="apparmor_parser"
<5>[    6.916798] type=1400 audit(1367125999.866:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-digikam///usr/sbin/mysqld" pid=1348 comm="apparmor_parser"
<5>[    6.916956] type=1400 audit(1367125999.866:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/clamd" pid=1346 comm="apparmor_parser"
<7>[    6.972215] forcedeth 0000:00:08.0: irq 85 for MSI/MSI-X
<6>[    6.972457] forcedeth 0000:00:08.0: eth0: no link during initialization
<6>[    6.974142] ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>[    6.974812] ADDRCONF(NETDEV_UP): eth0: link is not ready
<7>[    6.977785] forcedeth 0000:00:09.0: irq 86 for MSI/MSI-X
<6>[    7.021984] hda_codec: ALC262: SKU not ready 0x411111f0
<4>[    7.063414] init: alsa-restore main process (1436) terminated with status 19
<6>[    7.092836] kvm: Nested Virtualization enabled
<6>[    7.092844] kvm: Nested Paging enabled
<6>[    7.154139] input: HDA NVidia Line-Out as /devices/pci0000:00/0000:00:06.1/sound/card0/input7
<6>[    7.154251] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:06.1/sound/card0/input8
<3>[    7.790170] 3:3:1: cannot set freq 16000 to ep 0x86
<6>[    7.937308] usbcore: registered new interface driver snd-usb-audio
<7>[    8.017448] vboxdrv: Found 8 processor cores.
<4>[    8.017850] vboxdrv: fAsync=0 offMin=0x434 offMax=0x313a
<6>[    8.017941] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
<7>[    8.017943] vboxdrv: Successfully loaded version 4.1.12_Ubuntu (interface 0x00190000).
<6>[    8.028787] vboxpci: IOMMU not found (not registered)
<4>[    8.659568] init: plymouth-stop pre-start process (2719) terminated with status 1
<7>[   17.570024] eth1: no IPv6 routers present
ludovic@Super-Ordinateur:~$ 

édit : mais Linux cherche quand même IPv6 ?

Dernière modification par Compte supprimé (Le 28/04/2013, à 06:21)

#20 Le 28/04/2013, à 08:43

tiramiseb

Re : demarrage en 25 sec

édit : mais Linux cherche quand même IPv6 ?

C'est quoi que tu appelles "désactiver l'IPv6" ?
Comment as-tu fait pour "désactiver l'IPv6" ?

Hors ligne

#21 Le 28/04/2013, à 09:12

tiramiseb

Re : demarrage en 25 sec

Salut,

Chez moi le "trou" correspondant est là :

[    3.739474] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.3/3-2.3:1.0/input/input9
[    3.739851] hid-generic 0003:0A5C:4503.0005: input,hidraw2: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1a.0-2.3/input0
[    3.753109] usbcore: registered new interface driver btusb
[    4.709319] cfg80211: Found new beacon on frequency: 5180 MHz (Ch 36) on phy0
[    6.040329] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    6.290643] init: plymouth-stop pre-start process (1679) terminated with status 1
[   10.628886] wlan0: authenticate with f4:ca:e5:e7:1d:c4
[   10.631612] wlan0: send auth to f4:ca:e5:e7:1d:c4 (try 1/3)
[   10.635011] wlan0: authenticated
[   10.636050] wlan0: associate with f4:ca:e5:e7:1d:c4 (try 1/3)
[   10.639286] wlan0: RX AssocResp from f4:ca:e5:e7:1d:c4 (capab=0x411 status=0 aid=3)
[   10.640721] wlan0: associated
[   10.641276] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready

Mon système (Ubuntu GNOME) démarre en à peu près 11 secondes (du lancement de grub à l'écran de connexion).

Peut-être que ce "trou" correspond à un scan du matériel ou un truc comme ça.
Je ne trouve nulle part d'explication rationnelle de ce "trou", c'est emmerdant.

D'un côté je me dis qu'il faudrait demander à un développeur noyau son avis, d'un autre côté je me dis qu'on ne doit pas être les seuls et que d'autres se sont déjà posé la question et qu'il suffirait de trouver où, sans emmerder les développeurs noyau...

Dernière modification par tiramiseb (Le 28/04/2013, à 09:23)

Hors ligne

#22 Le 28/04/2013, à 09:32

Compte supprimé

Re : demarrage en 25 sec

tiramiseb a écrit :

édit : mais Linux cherche quand même IPv6 ?

C'est quoi que tu appelles "désactiver l'IPv6" ?
Comment as-tu fait pour "désactiver l'IPv6" ?

Avec l'outil réseau.

#23 Le 28/04/2013, à 09:38

tiramiseb

Re : demarrage en 25 sec

Donc tu n'as pas déchargé les modules du noyau pour l'IPv6, tu as juste déconfiguré ton interface... Le noyau charge toujours encore les modules.

Tu noteras avec mon retour qu'autre chose s'intercale avant. Et à chaque fois qu'on croit que c'est un truc, on le désactive et on se rend compte qu'il y a encore le "trou".

J'ai surtout l'impression que ce "trou" est causé par quelque chose qui tourne en parallèle et qui ne correspond à aucun des messages affichés...

Hors ligne

#24 Le 28/04/2013, à 09:57

F50

Re : demarrage en 25 sec

Salut,

Pour désactiver complètement l'IPv6, c'est ici au point 5.2:

http://doc.ubuntu-fr.org/optimisation

Ces trous ne sont pas normaux, j'en avais eu une fois, voici la discussion:

http://forum.ubuntu-fr.org/viewtopic.php?id=448236

Mon système boot en 5s sans aucune attente.

Dernière modification par faucon50 (Le 28/04/2013, à 10:17)

#25 Le 28/04/2013, à 10:09

tiramiseb

Re : demarrage en 25 sec

Salut faucon50,
Ton second lien est identique au premier, erreur de copié/collé ? smile

Hors ligne