Pages : 1
#1 Le 02/06/2013, à 09:36
- kalloos
probleme demarrage apres usb
Bonjour,
Après avoir installé ubuntu 12.04, quand je démarre j'ai un écran violet puis une grosse barre violettes et des barres blanches et noires.
J'ai essayé les autres versions ubuntu (12.10, 13.04 64 32 bits mais ca marche moins bien).
J'arrive a démarrer avec try without installing. Par contre je n'arrive pas à installer boot-repair.
A l'aide s'il vous plait...
Hors ligne
#2 Le 03/06/2013, à 07:29
- malbo
Re : probleme demarrage apres usb
C'est quoi ton ordi (nom commercial complet/fabricant) ?
Hors ligne
#3 Le 03/06/2013, à 14:36
- kalloos
Re : probleme demarrage apres usb
HP Pavillon m9465fr
Intel core 2 quad Q9400
Hors ligne
#4 Le 03/06/2013, à 15:05
- malbo
Re : probleme demarrage apres usb
Est-ce que tu arrives à démarrer une session live (choix "Essayer Ubuntu") de Ubuntu 12.04 et est-ce que tu arrives bien (en session live) sur le bureau de Ubuntu avec un affichage correct ?
Edit : ce serait ça ton ordi (avec carte graphique GeForce 9600 GS ) : http://www.clubic.com/shopping-392824-3 … m9465.html
Dernière modification par malbo (Le 03/06/2013, à 15:07)
Hors ligne
#5 Le 03/06/2013, à 16:36
- kalloos
Re : probleme demarrage apres usb
Oui c'est exactement ca l'ordi
Je démarre avec la clé usb, je fais échap pour choix de démarrage, je descend sur usb et là j'ai 7 choix :
- Défault
- Help
- Try Ubuntu Without Installing
- Install Ubuntu
- Check Disk for Defects
- Test Memory
- Boot For First Hard Disk
Quand je démarre sur try ubuntu without installing ça marche correctement (mais j'ai pas de choix live, sauf si c'est ça le live)
Hors ligne
#6 Le 03/06/2013, à 17:15
- kalloos
Re : probleme demarrage apres usb
mais sans la clé ça ne démarre pas j'ai un ecran violet avec ubuntu qui s'affiche
puis ubuntu part et la plus rien une grosse barre violette et des barres noires et blanches
Hors ligne
#7 Le 03/06/2013, à 18:03
- malbo
Re : probleme demarrage apres usb
Quand je démarre sur try ubuntu without installing ça marche correctement (mais j'ai pas de choix live, sauf si c'est ça le live)
Oui, c'est ça une session live. Normalement, tu dois arriver sur le bureau de Ubuntu et tu peux aller sur internet avec Firefox. Tu confirmes ?
Hors ligne
#8 Le 03/06/2013, à 18:04
- kalloos
Re : probleme demarrage apres usb
oui
Hors ligne
#9 Le 03/06/2013, à 18:10
- malbo
Re : probleme demarrage apres usb
Depuis ta session live, je te prie de répondre à cette demande : http://doc.ubuntu-fr.org/tutoriel/boot-info
Hors ligne
#10 Le 03/06/2013, à 18:56
- kalloos
Re : probleme demarrage apres usb
je n arrive pas a installer boot repair. J ai essaye l etape 1 et 2
a l etape 1 quand boot repair est installe (boot repair disk) ca ne demarre pas avec la cle
a l etape 2 dans le terminal ca me donne ca
ubuntu@ubuntu:~$ sudo add-apt-repository ppa:yannubuntu/boot-repair
You are about to add the following PPA to your system:
Simple tool to repair frequent boot problems.
Website: https://launchpad.net/boot-repair
More info: https://launchpad.net/~yannubuntu/+archive/boot-repair
Press [ENTER] to continue or ctrl-c to cancel adding it
Executing: gpg --ignore-time-conflict --no-options --no-default-keyring --secret-keyring /tmp/tmp.SyjqkXOpBj --trustdb-name /etc/apt/trustdb.gpg --keyring /etc/apt/trusted.gpg --primary-keyring /etc/apt/trusted.gpg --keyserver hkp://keyserver.ubuntu.com:80/ --recv 3C48D16124B50277AF10D27F32B18A1260D8DA0B
gpg: requesting key 60D8DA0B from hkp server keyserver.ubuntu.com
gpg: key 60D8DA0B: "Launchpad PPA for YannUbuntu" not changed
gpg: Total number processed: 1
gpg: unchanged: 1
ubuntu@ubuntu:~$
Hors ligne
#11 Le 03/06/2013, à 19:00
- malbo
Re : probleme demarrage apres usb
Tu ne comprends pas ce qu'il faut faire :
Depuis ta session live de Ubuntu (choix "Try Ubuntu Without Installing"), arrivé sur le bureau de Ubuntu, tu ouvres un terminal et tu as juste à passer les commandes indiquées :
d'abord celle-ci :
sudo add-apt-repository ppa:yannubuntu/boot-repair
valider par entrée
puis celle-ci :
sudo apt-get update; sudo apt-get install -y boot-repair && boot-repair
Ensuite, sans quitter ta session live, tu lances Boot-Repair comme c'est expliqué.
Dernière modification par malbo (Le 03/06/2013, à 19:02)
Hors ligne
#12 Le 03/06/2013, à 19:17
- kalloos
Re : probleme demarrage apres usb
j ai fait exactement ca
d abord la premiere phrase dans le terminalm valider
puis la seconde phrase valider
mais dans le dash je tape boot et j ai pas boot repair
Hors ligne
#13 Le 03/06/2013, à 19:19
- kalloos
Re : probleme demarrage apres usb
voici 2 images fenetres firefox avec terminal en premier plan
file:///home/ubuntu/Pictures/Screenshot%20from%202013-06-03%2017:18:06.png
file:///home/ubuntu/Pictures/Screenshot%20from%202013-06-03%2016:41:46.png
voici le texte dans le terminal apres avoir tape les 2 phrases
ubuntu@ubuntu:~$ sudo add-apt-repository ppa:yannubuntu/boot-repair
You are about to add the following PPA to your system:
Simple tool to repair frequent boot problems.
Website: https://launchpad.net/boot-repair
More info: https://launchpad.net/~yannubuntu/+archive/boot-repair
Press [ENTER] to continue or ctrl-c to cancel adding it
sudo apt-get update; sudo apt-get install -y boot-repair && boot-repair
Executing: gpg --ignore-time-conflict --no-options --no-default-keyring --secret-keyring /tmp/tmp.P3F50Rtp2K
--trustdb-name /etc/apt/trustdb.gpg --keyring /etc/apt/trusted.gpg --primary-keyring /etc/apt/trusted.gpg
--keyserver hkp://keyserver.ubuntu.com:80/ --recv 3C48D16124B50277AF10D27F32B18A1260D8DA0B
gpg: requesting key 60D8DA0B from hkp server keyserver.ubuntu.com
gpg: key 60D8DA0B: "Launchpad PPA for YannUbuntu" not changed
gpg: Total number processed: 1
gpg: unchanged: 1
ubuntu@ubuntu:~$
Dernière modification par kalloos (Le 03/06/2013, à 19:28)
Hors ligne
#14 Le 03/06/2013, à 19:34
- kalloos
Re : probleme demarrage apres usb
quand je tape boot-repair dans le terminal ca me donne ceci
ubuntu@ubuntu:~$ boot-repair
boot-repair: command not found
ubuntu@ubuntu:~$
Hors ligne
#15 Le 07/06/2013, à 18:06
- kalloos
Re : probleme demarrage apres usb
merci quand même malbo
j'ai essayé linux sécure ça ne démarre pas non plus
et comme un idiot j'ai désinstallé windows et je ne retrouve plus mes cd d'installation
comme j'avais déjà installé ubuntu avant sut un netbook et qu'il n'y avait pas eu de souci,
j'ai pas assez pris de précautions...
Merci quand même pour le temps que tu as passé
Hors ligne
#16 Le 15/06/2013, à 06:10
- kalloos
Re : probleme demarrage apres usb
bonjour, j'ai tout désinstallé et réinstallé au propre.
J'ai réussi à installé boot-repair. J'arrive à démarrer en live usb mais toujours pas en normal.
Boot repair me donne le message suivant boot-repair info url :
http://paste.ubuntu.com/5764169/
Hors ligne
#17 Le 15/06/2013, à 10:25
- malbo
Re : probleme demarrage apres usb
Ton Boot-Info est là :
Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 3June2013]
============================= Boot Info Summary: ===============================
=> Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos1)/boot/grub on this drive.
=> Syslinux MBR (3.61-4.03) is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 12.04.1 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sda2: __________________________________________________________________________
File system: Extended Partition
Boot sector type: Unknown
Boot sector info:
sda5: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdb1: __________________________________________________________________________
File system: vfat
Boot sector type: SYSLINUX 4.03 2010-10-22 ........>..sr>........<.9...0...~.....~...f...M.f.f....f..0~....>E}.u......
Boot sector info: Syslinux looks at sector 1482112 of /dev/sdb1 for its
second stage. SYSLINUX is installed in the directory.
No errors found in the Boot Parameter Block.
Operating System:
Boot files: /syslinux.cfg /ldlinux.sys
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 640.1 GB, 640135028736 bytes
255 heads, 63 sectors/track, 77825 cylinders, total 1250263728 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 1,241,874,431 1,241,872,384 83 Linux
/dev/sda2 1,241,876,478 1,250,263,039 8,386,562 5 Extended
/dev/sda5 1,241,876,480 1,250,263,039 8,386,560 82 Linux swap / Solaris
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 8011 MB, 8011120640 bytes
41 heads, 41 sectors/track, 9307 cylinders, total 15646720 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 8,064 15,646,719 15,638,656 b W95 FAT32
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 922b39e9-cac5-406c-bf33-42434b2dd878 ext4
/dev/sda5 7e0368d7-860c-4003-8df6-ead0bcee235a swap
/dev/sdb1 7064-70C7 vfat USB DISK
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sdb1 /cdrom vfat (ro,noatime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
=========================== sda1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 922b39e9-cac5-406c-bf33-42434b2dd878
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=auto
load_video
insmod gfxterm
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 922b39e9-cac5-406c-bf33-42434b2dd878
set locale_dir=($root)/boot/grub/locale
set lang=en_US
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
set timeout=10
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi
menuentry 'Ubuntu, with Linux 3.2.0-48-generic-pae' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 922b39e9-cac5-406c-bf33-42434b2dd878
linux /boot/vmlinuz-3.2.0-48-generic-pae root=UUID=922b39e9-cac5-406c-bf33-42434b2dd878 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-48-generic-pae
}
menuentry 'Ubuntu, with Linux 3.2.0-48-generic-pae (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 922b39e9-cac5-406c-bf33-42434b2dd878
echo 'Loading Linux 3.2.0-48-generic-pae ...'
linux /boot/vmlinuz-3.2.0-48-generic-pae root=UUID=922b39e9-cac5-406c-bf33-42434b2dd878 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.2.0-48-generic-pae
}
submenu "Previous Linux versions" {
menuentry 'Ubuntu, with Linux 3.2.0-29-generic-pae' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 922b39e9-cac5-406c-bf33-42434b2dd878
linux /boot/vmlinuz-3.2.0-29-generic-pae root=UUID=922b39e9-cac5-406c-bf33-42434b2dd878 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-29-generic-pae
}
menuentry 'Ubuntu, with Linux 3.2.0-29-generic-pae (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 922b39e9-cac5-406c-bf33-42434b2dd878
echo 'Loading Linux 3.2.0-29-generic-pae ...'
linux /boot/vmlinuz-3.2.0-29-generic-pae root=UUID=922b39e9-cac5-406c-bf33-42434b2dd878 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.2.0-29-generic-pae
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 922b39e9-cac5-406c-bf33-42434b2dd878
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set=root 922b39e9-cac5-406c-bf33-42434b2dd878
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda1/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda1 during installation
UUID=922b39e9-cac5-406c-bf33-42434b2dd878 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=7e0368d7-860c-4003-8df6-ead0bcee235a none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
170.135810852 = 182.681935872 boot/grub/grub.cfg 1
170.141628265 = 182.688182272 boot/grub/core.img 1
170.134025574 = 182.680018944 boot/vmlinuz-3.2.0-29-generic-pae 1
1.408004761 = 1.511833600 boot/vmlinuz-3.2.0-48-generic-pae 1
170.134025574 = 182.680018944 vmlinuz 1
2.037715912 = 2.187980800 boot/initrd.img-3.2.0-29-generic-pae 2
1.680664062 = 1.804599296 boot/initrd.img-3.2.0-48-generic-pae 2
2.037715912 = 2.187980800 initrd.img 2
============================== sdb1/syslinux.cfg: ==============================
--------------------------------------------------------------------------------
default menu.c32
prompt 0
menu title UNetbootin
timeout 100
label unetbootindefault
menu label Default
kernel /ubnkern
append initrd=/ubninit file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
label ubnentry0
menu label ^Help
kernel /ubnkern
append initrd=/ubninit
label ubnentry1
menu label ^Try Ubuntu without installing
kernel /casper/vmlinuz
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
label ubnentry2
menu label ^Install Ubuntu
kernel /casper/vmlinuz
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash --
label ubnentry3
menu label ^Check disc for defects
kernel /casper/vmlinuz
append initrd=/casper/initrd.lz boot=casper integrity-check quiet splash --
label ubnentry4
menu label Test ^memory
kernel /install/mt86plus
append initrd=/ubninit
label ubnentry5
menu label ^Boot from first hard disk
kernel /ubnkern
append initrd=/ubninit
--------------------------------------------------------------------------------
================= sdb1: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
?? = ?? syslinux.cfg 1
?? = ?? ldlinux.sys 1
?? = ?? menu.c32 1
============== sdb1: Version of COM32(R) files used by Syslinux: ===============
menu.c32 : COM32R module (v4.xx)
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown BootLoader on sda2
00000000 59 d7 bd 86 6d 42 c2 43 6e 6d 11 95 d2 51 b0 91 |Y...mB.Cnm...Q..|
00000010 a6 86 90 5a fe 5b a4 f5 db 9d 69 4f 0f b5 fb 75 |...Z.[....iO...u|
00000020 61 d6 9f b6 80 8f da 6e 1d 8b 82 e3 38 f3 28 01 |a......n....8.(.|
00000030 5c f9 4c 00 3f 82 a9 e4 05 15 fd 36 61 a7 dc 1d |\.L.?......6a...|
00000040 b3 59 a1 59 a9 3f 9a 30 1d d4 a6 70 1a 45 00 b5 |.Y.Y.?.0...p.E..|
00000050 0f b4 01 03 65 ee ce 04 24 f9 ef d9 bc 8b df a8 |....e...$.......|
00000060 eb 79 82 cb 9a a6 f9 6f e7 57 f7 f5 ea 65 83 f8 |.y.....o.W...e..|
00000070 f5 1b 83 80 50 49 e3 a9 38 c0 c0 21 1c e1 e9 f4 |....PI..8..!....|
00000080 7b dd fc d9 4e 85 7e 15 c8 31 32 fd e5 97 b1 97 |{...N.~..12.....|
00000090 77 c3 4d 1e 0c 56 76 de 7d 3e c1 8e e3 91 0e 06 |w.M..Vv.}>......|
000000a0 fc c7 02 65 a2 9b fa 65 ed 9a 89 2f 43 af f0 bf |...e...e.../C...|
000000b0 a7 09 fe f6 5c ac 7f 90 cc 91 86 86 62 04 46 04 |....\.......b.F.|
000000c0 12 16 bf a8 15 94 96 09 74 9e 5f 19 01 df db 6e |........t._....n|
000000d0 5c de 65 2c 19 17 72 49 bb 38 bf 82 2c a5 96 aa |\.e,..rI.8..,...|
000000e0 2e 43 fd 47 25 bd bf 06 d2 7f af 2b 15 07 69 c8 |.C.G%......+..i.|
000000f0 1a e2 77 89 84 11 9d b9 c7 a7 c5 67 d6 fb f6 3c |..w........g...<|
00000100 8b eb 33 73 74 ca 6d f5 72 11 00 aa f9 9c 68 ba |..3st.m.r.....h.|
00000110 76 89 b6 3f 79 01 e0 d8 ba 11 fd 81 df 86 1c f9 |v..?y...........|
00000120 95 00 b7 dc 13 00 28 f1 52 16 2b 7c db 8d b8 19 |......(.R.+|....|
00000130 83 33 eb 3d 03 35 ab bd c7 54 1a d2 81 03 92 45 |.3.=.5...T.....E|
00000140 f6 27 07 9a e0 e0 15 71 0c 87 d2 3d 82 20 c3 65 |.'.....q...=. .e|
00000150 9b 37 17 3b 69 eb 02 1c 87 76 da ab 93 4a b9 03 |.7.;i....v...J..|
00000160 a1 cd de 1f 1c b4 69 7b 8b eb b5 84 7e 68 2f d0 |......i{....~h/.|
00000170 01 87 22 7b ee 0b 73 3f 2c ee b4 34 6f bf 1c 0b |.."{..s?,..4o...|
00000180 e6 9c a2 10 cb fe a3 ef 34 dc 62 9f b9 f5 ef b7 |........4.b.....|
00000190 8a 7d 81 df 72 6e e0 f8 af de f2 81 0a 07 35 93 |.}..rn........5.|
000001a0 88 81 f2 a6 2a a4 d1 f2 ed 2e 41 8d 3c 81 6f 4f |....*.....A.<.oO|
000001b0 b8 41 5b ac b9 b4 a8 93 3b ef d8 00 39 f7 00 fe |.A[.....;...9...|
000001c0 ff ff 82 fe ff ff 02 00 00 00 00 f8 7f 00 00 00 |................|
000001d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
========= Devices which don't seem to have a corresponding hard drive: =========
sdc sdd sde sdf
ADDITIONAL INFORMATION :
=================== log of boot-repair 2013-06-14__09h52 ===================
boot-repair version : 3.199~ppa5~precise
boot-sav version : 3.199~ppa5~precise
glade2script version : 3.2.2~ppa45~precise
boot-sav-extra version : 3.199~ppa5~precise
boot-repair is executed in live-session (Ubuntu 12.04.1 LTS, precise, Ubuntu, i686)
ls: cannot access /home/usr/.config: No such file or directory
CPU op-mode(s): 32-bit, 64-bit
initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash -- BOOT_IMAGE=/casper/vmlinuz
=================== os-prober:
/dev/sda1:Ubuntu 12.04.1 LTS (12.04):Ubuntu:linux
=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/sda1: UUID="922b39e9-cac5-406c-bf33-42434b2dd878" TYPE="ext4"
/dev/sda5: UUID="7e0368d7-860c-4003-8df6-ead0bcee235a" TYPE="swap"
/dev/sdb1: LABEL="USB DISK" UUID="7064-70C7" TYPE="vfat"
1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
Warning: extended partition does not start at a cylinder boundary.
DOS and Linux will interpret the contents differently.
=================== sda1/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
=================== sda1/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 Aug 17 2012 grub.d
total 56
-rwxr-xr-x 1 root root 6715 May 17 2012 00_header
-rwxr-xr-x 1 root root 5522 May 17 2012 05_debian_theme
-rwxr-xr-x 1 root root 7407 May 17 2012 10_linux
-rwxr-xr-x 1 root root 6335 May 17 2012 20_linux_xen
-rwxr-xr-x 1 root root 1588 Nov 27 2011 20_memtest86+
-rwxr-xr-x 1 root root 7603 May 17 2012 30_os-prober
-rwxr-xr-x 1 root root 214 May 17 2012 40_custom
-rwxr-xr-x 1 root root 95 May 17 2012 41_custom
-rw-r--r-- 1 root root 483 May 17 2012 README
=================== UEFI/Legacy mode:
This live-session is not EFI-compatible.
SecureBoot maybe enabled.
=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, grubenv-ok grub2, grub-pc , update-grub, 32, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, /mnt/boot-sav/sda1.
sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 2048 sectors * 512 bytes
=================== parted -l:
Model: ATA WDC WD6400AAKS-6 (scsi)
Disk /dev/sda: 640GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 636GB 636GB primary ext4 boot
2 636GB 640GB 4294MB extended
5 636GB 640GB 4294MB logical linux-swap(v1)
Model: USB DISK 2.0 (scsi)
Disk /dev/sdb: 8011MB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 4129kB 8011MB 8007MB primary fat32 boot
=================== parted -lm:
BYT;
/dev/sda:640GB:scsi:512:512:msdos:ATA WDC WD6400AAKS-6;
1:1049kB:636GB:636GB:ext4::boot;
2:636GB:640GB:4294MB:::;
5:636GB:640GB:4294MB:linux-swap(v1)::;
BYT;
/dev/sdb:8011MB:scsi:512:512:msdos: USB DISK 2.0;
1:4129kB:8011MB:8007MB:fat32::boot;
=================== mount:
/cow on / type overlayfs (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sdb1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
gvfs-fuse-daemon on /home/ubuntu/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=ubuntu)
/dev/sda1 on /mnt/boot-sav/sda1 type ext4 (rw)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda5 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 size slaves stat subsystem trace uevent
/sys/block/sdc (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sdd (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sde (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sdf (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency disk dri dvd dvdrw ecryptfs fb0 fd full fuse fw0 hidraw0 hidraw1 hidraw2 hidraw3 hidraw4 hidraw5 hidraw6 hpet input kmsg lirc0 log mapper mcelog mem net network_latency network_throughput null oldmem port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda5 sdb sdb1 sdc sdd sde sdf sg0 sg1 sg2 sg3 sg4 sg5 sg6 shm snapshot snd sr0 stderr stdin stdout uinput urandom usb usbmon0 usbmon1 usbmon2 usbmon3 usbmon4 usbmon5 usbmon6 usbmon7 usbmon8 vga_arbiter zero
ls /dev/mapper: control
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/cow overlayfs 2.0G 111M 1.9G 6% /
udev devtmpfs 2.0G 12K 2.0G 1% /dev
tmpfs tmpfs 806M 944K 805M 1% /run
/dev/sdb1 vfat 7.5G 720M 6.8G 10% /cdrom
/dev/loop0 squashfs 667M 667M 0 100% /rofs
tmpfs tmpfs 2.0G 32K 2.0G 1% /tmp
none tmpfs 5.0M 0 5.0M 0% /run/lock
none tmpfs 2.0G 176K 2.0G 1% /run/shm
/dev/sda1 ext4 592G 12G 551G 3% /mnt/boot-sav/sda1
=================== fdisk -l:
Disk /dev/sda: 640.1 GB, 640135028736 bytes
255 heads, 63 sectors/track, 77825 cylinders, total 1250263728 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000dd4d2
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 1241874431 620936192 83 Linux
/dev/sda2 1241876478 1250263039 4193281 5 Extended
/dev/sda5 1241876480 1250263039 4193280 82 Linux swap / Solaris
Disk /dev/sdb: 8011 MB, 8011120640 bytes
41 heads, 41 sectors/track, 9307 cylinders, total 15646720 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x1f194c43
Device Boot Start End Blocks Id System
/dev/sdb1 * 8064 15646719 7819328 b W95 FAT32
=================== Recommended repair
Recommended-Repair
This setting will reinstall the grub2 of sda1 into the MBR of sda.
Additional repair will be performed: unhide-bootmenu-10s
Unhide GRUB boot menu in sda1/etc/default/grub
grub-install (GRUB) 1.99-21ubuntu3.1,grub-install (GRUB) 1.
Reinstall the GRUB of sda1 into the MBR of sda
grub-install /dev/sda: Installation finished. No error reported.
exit code of grub-install /dev/sda:0
chroot /mnt/boot-sav/sda1 update-grub
Generating grub.cfg ...
Found linux image: /boot/vmlinuz-3.2.0-48-generic-pae
Found initrd image: /boot/initrd.img-3.2.0-48-generic-pae
Found linux image: /boot/vmlinuz-3.2.0-29-generic-pae
Found initrd image: /boot/initrd.img-3.2.0-29-generic-pae
Found memtest86+ image: /boot/memtest86+.bin
Unhide GRUB boot menu in sda1/boot/grub/grub.cfg
Boot successfully repaired.
You can now reboot your computer.
pastebinit packages needed
dpkg-preconfigure: unable to re-open stdin: No such file or directory
Au démarrage de ton ordi, maintiens la touche Shift enfoncée jusqu'à ce que tu puisses voir le menu Grub et là, tu choisis la deuxième ligne du menu :
Ubuntu, with Linux 3.2.0-48-generic-pae (recovery mode)
Puis dans le "Recovery Menu" qui doit apparaître après quelques instants, tu sélectionneras "resume"
Pourquoi cette proposition ? Parce que le démarrage en "recovery mode" se fait avec l'option de démarrage nomodeset qui est plus favorable aux vieilles cartes graphiques et j'espère que ça pourra te permettre de démarrer en mode graphique, même si c’est avec un affichage minimaliste.
Dernière modification par malbo (Le 15/06/2013, à 10:33)
Hors ligne
#18 Le 15/06/2013, à 11:31
- kalloos
Re : probleme demarrage apres usb
ça fonctionne, encore merci pour ton aide précieuse
Hors ligne
#19 Le 15/06/2013, à 18:59
- malbo
Re : probleme demarrage apres usb
kalloos,
Ce que je t'ai indiqué n'est certainement pas ce qui permet d'avoir le meilleur affichage possible pour ta carte graphique : c'est seulement une sorte de mode graphique sans échec. Je te suggère de créer une nouvelle discussion dans la rubrique "Affichage et cartes graphiques" du forum pour demander s'il est possible d'avoir un affichage plus performant (tu donnera le lien vers la présente discussion pour informer ceux qui pourraient t'aider).
Hors ligne
Pages : 1