serveur web

ilyestahabel · Le 03/06/2013, à 17:24

bonjour
j ai crée un certificat ssl pour apache2 sous ubuntu 10.04 et j ai tester sous internet avec Windows sa a marcher avec mon adresse iplocal c est a dire en tapent l URL suivante https://adreseip mais se que je souhaite faire c'est d'avoir la page que j ai crée c est a dire www.monsite.com et non pas index.html.

cordialement

nesthib · Le 04/06/2013, à 06:09

Peux-tu donner le contenu de tes fichiers de configuration apache ? en particulier /etc/apache2/apache2.conf et /etc/apache2/sites-available/<fichier-de-conf-de-ton-hôte>
Merci d'utiliser les balises code (bouton ) pour les poster.

ilyestahabel · Le 05/06/2013, à 11:01

#
# Based upon the NCSA server configuration files originally by Rob McCool.
#
# This is the main Apache server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See http://httpd.apache.org/docs/2.2/ for detailed information about
# the directives.
#
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are unsure
# consult the online docs. You have been warned.  
#
# The configuration directives are grouped into three basic sections:
#  1. Directives that control the operation of the Apache server process as a
#     whole (the 'global environment').
#  2. Directives that define the parameters of the 'main' or 'default' server,
#     which responds to requests that aren't handled by a virtual host.
#     These directives also provide default values for the settings
#     of all virtual hosts.
#  3. Settings for virtual hosts, which allow Web requests to be sent to
#     different IP addresses or hostnames and have them handled by the
#     same Apache server process.
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path.  If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "/var/log/apache2/foo.log"
# with ServerRoot set to "" will be interpreted by the
# server as "//var/log/apache2/foo.log".
#

### Section 1: Global Environment
#
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
#

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# NOTE!  If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation (available
# at <URL:http://httpd.apache.org/docs-2.1/mod/mpm_common.html#lockfile>);
# you will save yourself a lot of trouble.
#
# Do NOT add a slash at the end of the directory path.
#
ServerRoot "/etc/apache2"

#
# The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
#
#<IfModule !mpm_winnt.c>
#<IfModule !mpm_netware.c>
LockFile /var/lock/apache2/accept.lock
#</IfModule>
#</IfModule>

#
# PidFile: The file in which the server should record its process
# identification number when it starts.
# This needs to be set in /etc/apache2/envvars
#
PidFile ${APACHE_PID_FILE}

#
# Timeout: The number of seconds before receives and sends time out.
#
Timeout 300

#
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive On

#
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 100

#
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
#
KeepAliveTimeout 15

##
## Server-Pool Size Regulation (MPM specific)
## 

# prefork MPM
# StartServers: number of server processes to start
# MinSpareServers: minimum number of server processes which are kept spare
# MaxSpareServers: maximum number of server processes which are kept spare
# MaxClients: maximum number of server processes allowed to start
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule mpm_prefork_module>
    StartServers          5
    MinSpareServers       5
    MaxSpareServers      10
    MaxClients          150
    MaxRequestsPerChild   0
</IfModule>

# worker MPM
# StartServers: initial number of server processes to start
# MaxClients: maximum number of simultaneous client connections
# MinSpareThreads: minimum number of worker threads which are kept spare
# MaxSpareThreads: maximum number of worker threads which are kept spare
# ThreadsPerChild: constant number of worker threads in each server process
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule mpm_worker_module>
    StartServers          2
    MinSpareThreads      25
    MaxSpareThreads      75 
    ThreadLimit          64
    ThreadsPerChild      25
    MaxClients          150
    MaxRequestsPerChild   0
</IfModule>

# event MPM
# StartServers: initial number of server processes to start
# MaxClients: maximum number of simultaneous client connections
# MinSpareThreads: minimum number of worker threads which are kept spare
# MaxSpareThreads: maximum number of worker threads which are kept spare
# ThreadsPerChild: constant number of worker threads in each server process
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule mpm_event_module>
    StartServers          2
    MaxClients          150
    MinSpareThreads      25
    MaxSpareThreads      75 
    ThreadLimit          64
    ThreadsPerChild      25
    MaxRequestsPerChild   0
</IfModule>

# These need to be set in /etc/apache2/envvars
User ${APACHE_RUN_USER}
Group ${APACHE_RUN_GROUP}

#
# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives.  See also the AllowOverride
# directive.
#

AccessFileName .htaccess

#
# The following lines prevent .htaccess and .htpasswd files from being 
# viewed by Web clients. 
#
<Files ~ "^\.ht">
    Order allow,deny
    Deny from all
    Satisfy all
</Files>

#
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value.  If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain


#
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
#
HostnameLookups Off

# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog /var/log/apache2/error.log

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

# Include module configuration:
Include /etc/apache2/mods-enabled/*.load
Include /etc/apache2/mods-enabled/*.conf

# Include all the user configurations:
Include /etc/apache2/httpd.conf

# Include ports listing
Include /etc/apache2/ports.conf

#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
# If you are behind a reverse proxy, you might want to change %h into %{X-Forwarded-For}i
#
LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined
LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %O" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent

#
# Define an access log for VirtualHosts that don't define their own logfile
CustomLog /var/log/apache2/other_vhosts_access.log vhost_combined


# Include of directories ignores editors' and dpkg's backup files,
# see README.Debian for details.

# Include generic snippets of statements
Include /etc/apache2/conf.d/

# Include the virtual host configurations:
Include /etc/apache2/sites-enabled/

<VirtualHost *:80>
	ServerAdmin webmaster@localhost

	DocumentRoot /var/www
	<Directory />
		Options FollowSymLinks
		AllowOverride None
	</Directory>
	<Directory /var/www/>
		Options Indexes FollowSymLinks MultiViews
		AllowOverride None
		Order allow,deny
		allow from all
	</Directory>

	ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/
	<Directory "/usr/lib/cgi-bin">
		AllowOverride None
		Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch
		Order allow,deny
		Allow from all
	</Directory>

	ErrorLog /var/log/apache2/error.log

	# Possible values include: debug, info, notice, warn, error, crit,
	# alert, emerg.
	LogLevel warn

	CustomLog /var/log/apache2/access.log combined

    Alias /doc/ "/usr/share/doc/"
    <Directory "/usr/share/doc/">
        Options Indexes MultiViews FollowSymLinks
        AllowOverride None
        Order deny,allow
        Deny from all
        Allow from 127.0.0.0/255.0.0.0 ::1/128
    </Directory>

</VirtualHost>

<IfModule mod_ssl.c>
<VirtualHost _default_:443>
	ServerAdmin webmaster@localhost

	DocumentRoot /var/www
	<Directory />
		Options FollowSymLinks
		AllowOverride None
	</Directory>
	<Directory /var/www/>
		Options Indexes FollowSymLinks MultiViews
		AllowOverride None
		Order allow,deny
		allow from all
	</Directory>

	ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/
	<Directory "/usr/lib/cgi-bin">
		AllowOverride None
		Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch
		Order allow,deny
		Allow from all
	</Directory>

	ErrorLog /var/log/apache2/error.log

	# Possible values include: debug, info, notice, warn, error, crit,
	# alert, emerg.
	LogLevel warn

	CustomLog /var/log/apache2/ssl_access.log combined

	Alias /doc/ "/usr/share/doc/"
	<Directory "/usr/share/doc/">
		Options Indexes MultiViews FollowSymLinks
		AllowOverride None
		Order deny,allow
		Deny from all
		Allow from 127.0.0.0/255.0.0.0 ::1/128
	</Directory>

	#   SSL Engine Switch:
	#   Enable/Disable SSL for this virtual host.
	SSLEngine on

	#   A self-signed (snakeoil) certificate can be created by installing
	#   the ssl-cert package. See
	#   /usr/share/doc/apache2.2-common/README.Debian.gz for more info.
	#   If both key and certificate are stored in the same file, only the
	#   SSLCertificateFile directive is needed.
	SSLCertificateFile /etc/apache2/ssl-certs/www.ilyes-belhouari.com.crt
        SSLCertificateKeyFile /etc/apache2/ssl-certs/www.ilyes-belhouari.com.key


	#   Server Certificate Chain:
	#   Point SSLCertificateChainFile at a file containing the
	#   concatenation of PEM encoded CA certificates which form the
	#   certificate chain for the server certificate. Alternatively
	#   the referenced file can be the same as SSLCertificateFile
	#   when the CA certificates are directly appended to the server
	#   certificate for convinience.
	#SSLCertificateChainFile /etc/apache2/ssl.crt/server-ca.crt

	#   Certificate Authority (CA):
	#   Set the CA certificate verification path where to find CA
	#   certificates for client authentication or alternatively one
	#   huge file containing all of them (file must be PEM encoded)
	#   Note: Inside SSLCACertificatePath you need hash symlinks
	#         to point to the certificate files. Use the provided
	#         Makefile to update the hash symlinks after changes.
	#SSLCACertificatePath /etc/ssl/certs/
	#SSLCACertificateFile /etc/apache2/ssl.crt/ca-bundle.crt

	#   Certificate Revocation Lists (CRL):
	#   Set the CA revocation path where to find CA CRLs for client
	#   authentication or alternatively one huge file containing all
	#   of them (file must be PEM encoded)
	#   Note: Inside SSLCARevocationPath you need hash symlinks
	#         to point to the certificate files. Use the provided
	#         Makefile to update the hash symlinks after changes.
	#SSLCARevocationPath /etc/apache2/ssl.crl/
	#SSLCARevocationFile /etc/apache2/ssl.crl/ca-bundle.crl

	#   Client Authentication (Type):
	#   Client certificate verification type and depth.  Types are
	#   none, optional, require and optional_no_ca.  Depth is a
	#   number which specifies how deeply to verify the certificate
	#   issuer chain before deciding the certificate is not valid.
	#SSLVerifyClient require
	#SSLVerifyDepth  10

	#   Access Control:
	#   With SSLRequire you can do per-directory access control based
	#   on arbitrary complex boolean expressions containing server
	#   variable checks and other lookup directives.  The syntax is a
	#   mixture between C and Perl.  See the mod_ssl documentation
	#   for more details.
	#<Location />
	#SSLRequire (    %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \
	#            and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
	#            and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
	#            and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
	#            and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20       ) \
	#           or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
	#</Location>

	#   SSL Engine Options:
	#   Set various options for the SSL engine.
	#   o FakeBasicAuth:
	#     Translate the client X.509 into a Basic Authorisation.  This means that
	#     the standard Auth/DBMAuth methods can be used for access control.  The
	#     user name is the `one line' version of the client's X.509 certificate.
	#     Note that no password is obtained from the user. Every entry in the user
	#     file needs this password: `xxj31ZMTZzkVA'.
	#   o ExportCertData:
	#     This exports two additional environment variables: SSL_CLIENT_CERT and
	#     SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
	#     server (always existing) and the client (only existing when client
	#     authentication is used). This can be used to import the certificates
	#     into CGI scripts.
	#   o StdEnvVars:
	#     This exports the standard SSL/TLS related `SSL_*' environment variables.
	#     Per default this exportation is switched off for performance reasons,
	#     because the extraction step is an expensive operation and is usually
	#     useless for serving static content. So one usually enables the
	#     exportation for CGI and SSI requests only.
	#   o StrictRequire:
	#     This denies access when "SSLRequireSSL" or "SSLRequire" applied even
	#     under a "Satisfy any" situation, i.e. when it applies access is denied
	#     and no other module can change it.
	#   o OptRenegotiate:
	#     This enables optimized SSL connection renegotiation handling when SSL
	#     directives are used in per-directory context.
	#SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire
	<FilesMatch "\.(cgi|shtml|phtml|php)$">
		SSLOptions +StdEnvVars
	</FilesMatch>
	<Directory /usr/lib/cgi-bin>
		SSLOptions +StdEnvVars
	</Directory>

	#   SSL Protocol Adjustments:
	#   The safe and default but still SSL/TLS standard compliant shutdown
	#   approach is that mod_ssl sends the close notify alert but doesn't wait for
	#   the close notify alert from client. When you need a different shutdown
	#   approach you can use one of the following variables:
	#   o ssl-unclean-shutdown:
	#     This forces an unclean shutdown when the connection is closed, i.e. no
	#     SSL close notify alert is send or allowed to received.  This violates
	#     the SSL/TLS standard but is needed for some brain-dead browsers. Use
	#     this when you receive I/O errors because of the standard approach where
	#     mod_ssl sends the close notify alert.
	#   o ssl-accurate-shutdown:
	#     This forces an accurate shutdown when the connection is closed, i.e. a
	#     SSL close notify alert is send and mod_ssl waits for the close notify
	#     alert of the client. This is 100% SSL/TLS standard compliant, but in
	#     practice often causes hanging connections with brain-dead browsers. Use
	#     this only for browsers where you know that their SSL implementation
	#     works correctly.
	#   Notice: Most problems of broken clients are also related to the HTTP
	#   keep-alive facility, so you usually additionally want to disable
	#   keep-alive for those clients, too. Use variable "nokeepalive" for this.
	#   Similarly, one has to force some clients to use HTTP/1.0 to workaround
	#   their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and
	#   "force-response-1.0" for this.
	BrowserMatch "MSIE [2-6]" \
		nokeepalive ssl-unclean-shutdown \
		downgrade-1.0 force-response-1.0
	# MSIE 7 and newer should be able to use keepalive
	BrowserMatch "MSIE [17-9]" ssl-unclean-shutdown

</VirtualHost>
</IfModule>

nesthib · Le 05/06/2013, à 15:20

Après la ligne ServerAdmin, ajoute

ServerName www.example.com

ilyestahabel · Le 05/06/2013, à 19:16

vou vlouler dir dans le ssl

nesthib · Le 05/06/2013, à 20:43

Pourrais-tu faire un effort de rédaction… pour 6 mots c'est un peu exagéré…
Pour le reste je te laisse tester, ça n'est pas bien compliqué.

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 03/06/2013, à 17:24

serveur web

#2 Le 04/06/2013, à 06:09

Re : serveur web

#3 Le 05/06/2013, à 11:01

Re : serveur web

#4 Le 05/06/2013, à 15:20

Re : serveur web

#5 Le 05/06/2013, à 19:16

Re : serveur web

#6 Le 05/06/2013, à 20:43

Re : serveur web

Pied de page des forums