Pages : 1
#1 Le 09/01/2008, à 14:59
- medoc974
Probleme de resolution (driver Nvida)
bonjour,
voila 2 fois que je tente d installer les driver Nvida (pour une 7600gt/Belinea 19")
La 1 er par le gestionnair proprietair puis par ligne de commande.
Le resulta est le meme inspossible de motifier la resolution (bloquer en 640x350 50hz) et aussi ecran sombre par endroit mais que en VGA. (en DVI que le probleme de resolution)
@+
Hors ligne
#2 Le 09/01/2008, à 15:11
- Wallalai
Re : Probleme de resolution (driver Nvida)
As-tu essayé de lancer nvidia-settings dans une console ? A lancer en root si tu veux pouvoir sauvegarder les modifs dans /etc/X11/xorg.conf.
Si les drivers proprios sont installés le programme devrit être présent.
Hors ligne
#3 Le 09/01/2008, à 15:58
- medoc974
Re : Probleme de resolution (driver Nvida)
Oui le programe est present,mais j arrive pas a change la resolution...:mad:
du faite la dimmention...
voila le contenu de dossier xorg.gonf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder3) Wed Sep 12 14:29:35 PDT 2007
# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
# Uncomment if you have a wacom tablet
# InputDevice "stylus" "SendCoreEvents"
# InputDevice "cursor" "SendCoreEvents"
# InputDevice "eraser" "SendCoreEvents"
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection
Section "Files"
EndSection
Section "Module"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbVariant" "oss"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Monitor"
Identifier "à‰cran générique"
HorizSync 30.0 - 70.0
VertRefresh 50.0 - 160.0
Option "DPMS"
EndSection
Section "Device"
Identifier "nVidia Corporation G70 [GeForce 7600 GT]"
Driver "nvidia"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "nVidia Corporation G70 [GeForce 7600 GT]"
Monitor "à‰cran générique"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "nvidia-auto-select"
EndSubSection
EndSection
Pourrais tu me dire comment et surtout faire pour modifier se fichier?
@+
Hors ligne
#4 Le 09/01/2008, à 16:02
- iuchiban
Re : Probleme de resolution (driver Nvida)
sudo dpkg-reconfigure xserver-xorg
pour essayer de redetecter ton matériel.
C'est depuis que Chuck Norris a laissé la vie sauve à un manchot que l'on dit que Linux est libre.
Chuck Norris n'a pas besoin d'éditer son premier message pour ajouter [Résolu]. Chuck Norris est toujours [Résolu], quoi qu'il arrive.
Hors ligne
#6 Le 09/01/2008, à 16:30
- medoc974
Re : Probleme de resolution (driver Nvida)
sudo dpkg-reconfigure xserver-xorg
pour essayer de redetecter ton matériel.
le meteriel a l air d etre reconnu (du moins je pense ...)
Le probleme viens plustot de l ecran qui est mal reconnu.. (je dois dire une connerie la...)
il y a pas un moyen de forcer la resulotion 800x600 ,histoire que je puis deinstaller le pilote Nvida...
Merci d avance
@+
Hors ligne
#7 Le 09/01/2008, à 16:42
- medoc974
Re : Probleme de resolution (driver Nvida)
As-tu essayé de lancer nvidia-settings dans une console ? A lancer en root si tu veux pouvoir sauvegarder les modifs dans /etc/X11/xorg.conf.
Si les drivers proprios sont installés le programme devrit être présent.
Peux tu detailler la mache a suivre stp?
@+
Hors ligne
#8 Le 09/01/2008, à 16:53
- medoc974
Re : Probleme de resolution (driver Nvida)
quel sont les motifiquation a faire dans le xorg.conf
Hors ligne
#10 Le 09/01/2008, à 18:08
- medoc974
Re : Probleme de resolution (driver Nvida)
# xorg.conf (x:)org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbVariant" "oss"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "Device"
Identifier "nVidia Corporation G70 [GeForce 7600 GT]"
Boardname "nv"
Busid "PCI:1:0:0"
Driver "nvidia"
Screen 0
EndSection
Section "Monitor"
Identifier "101903"
Vendorname "Belinea"
Modelname "Belinea 10 19 03 / Art. No. 111928"
Horizsync 31.0-83.0
Vertrefresh 56.0-75.0
modeline "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
modeline "640x480@72" 31.5 640 664 704 832 480 489 491 520 -vsync -hsync
modeline "640x480@75" 31.5 640 656 720 840 480 481 484 500 -vsync -hsync
modeline "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
modeline "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
modeline "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
modeline "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
modeline "832x624@75" 57.284 832 864 928 1152 624 625 628 667 -vsync -hsync
modeline "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
modeline "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -vsync -hsync
modeline "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
modeline "1152x864@75" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
modeline "1280x1024@75" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
modeline "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
modeline "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
modeline "1280x960@75" 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
modeline "1400x1050@60" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
modeline "1400x1050@75" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -hsync +vsync
modeline "1600x1200@65" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
modeline "1600x1200@60" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
modeline "1792x1344@60" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
Gamma 1.0
EndSection
Section "Screen"
Identifier "Default Screen"
Device "nVidia Corporation G70 [GeForce 7600 GT]"
Monitor "101903"
Defaultdepth 24
SubSection "Display"
Depth 24
Virtual 1792 1344
Modes "1024x768@75" "1024x768@70" "832x624@75" "1024x768@60" "800x600@60" "1152x864@75" "800x600@75" "1280x1024@75" "800x600@72" "1280x960@60" "800x600@56" "1280x1024@60" "640x480@75" "1280x960@75" "640x480@72" "1400x1050@60" "640x480@60" "1400x1050@75" "1600x1200@65" "1600x1200@60" "1792x1344@60"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
screen 0 "Default Screen" 0 0
Inputdevice "Generic Keyboard"
Inputdevice "Configured Mouse"
# Uncomment if you have a wacom tablet
# InputDevice "stylus" "SendCoreEvents"
# InputDevice "cursor" "SendCoreEvents"
# InputDevice "eraser" "SendCoreEvents"
EndSection
Section "Module"
Load "glx"
Load "v4l"
EndSection
Section "device" #
Identifier "device1"
Boardname "nv"
Busid "PCI:1:0:0"
Driver "nvidia"
Screen 1
EndSection
Section "screen" #
Identifier "screen1"
Device "device1"
Defaultdepth 24
Monitor "monitor1"
SubSection "Display"
Depth 24
Modes "640x480@60" "640x480@72" "640x480@75" "800x600@56" "800x600@72" "800x600@75" "800x600@60" "832x624@75" "1024x768@75" "1024x768@70" "1024x768@60" "1152x864@75" "1280x1024@75" "1280x960@60" "1280x1024@60" "1280x960@75" "1400x1050@60" "1400x1050@75" "1600x1200@65" "1600x1200@60" "1792x1344@60"
EndSubSection
EndSection
Section "monitor" #
Identifier "monitor1"
Vendorname "Belinea"
Modelname "Belinea 10 19 03 / Art. No. 111928"
Horizsync 31.0-83.0
Vertrefresh 56.0-75.0
modeline "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
modeline "640x480@72" 31.5 640 664 704 832 480 489 491 520 -vsync -hsync
modeline "640x480@75" 31.5 640 656 720 840 480 481 484 500 -vsync -hsync
modeline "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
modeline "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
modeline "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
modeline "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
modeline "832x624@75" 57.284 832 864 928 1152 624 625 628 667 -vsync -hsync
modeline "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
modeline "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -vsync -hsync
modeline "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
modeline "1152x864@75" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
modeline "1280x1024@75" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
modeline "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
modeline "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
modeline "1280x960@75" 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
modeline "1400x1050@60" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
modeline "1400x1050@75" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -hsync +vsync
modeline "1600x1200@65" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
modeline "1600x1200@60" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
modeline "1792x1344@60" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
Gamma 1.0
EndSection
Section "ServerFlags"
EndSection
Hors ligne
#11 Le 09/01/2008, à 18:17
- Wallalai
Re : Probleme de resolution (driver Nvida)
Si tu a pu installer le driver propriétaire Nvidia, il faut ouvrir une console: Accessoires -> Terminal
Dans cette console tu vas taper: sudo nvidia-settings
Apres avoir entré ton password la fenêtre de config Nvidia devrait apparaà®tre.
Dans Xserver Display Configuration, choisis tes préférences et valide avec le bouton: Save to X Configuration File
Je peux pas en dire plus.
PS. Edite ton fichier /etc/X11/xorg.conf et remplace nv par nvidia mais le sujet a été largement abordé ici et est même dans la documentation. Donc je te laisse faire des recherches.
Dernière modification par Wallalai (Le 09/01/2008, à 18:19)
Hors ligne
#12 Le 09/01/2008, à 18:33
- medoc974
Re : Probleme de resolution (driver Nvida)
Section "Screen"
Identifier "Default Screen"
Device "nVidia Corporation G70 [GeForce 7600 GT]"
Monitor "101903"
Defaultdepth 24
SubSection "Display"
Depth 24
Virtual 1792 1344
Modes "1024x768@75" "1024x768@70" "832x624@75" "1024x768@60" "800x600@60" "1152x864@75" "800x600@75" "1280x1024@75" "800x600@72" "1280x960@60" "800x600@56" "1280x1024@60" "640x480@75" "1280x960@75" "640x480@72" "1400x1050@60" "640x480@60" "1400x1050@75" "1600x1200@65" "1600x1200@60" "1792x1344@60"
EndSubSection
EndSection
D'apres un post le probleme (ou la solution)est dans ces quelques lignes ici...
Mes connaissance en linux me premettent pas d aller plus loin!
@+
Hors ligne
#13 Le 09/01/2008, à 18:47
- Wallalai
Re : Probleme de resolution (driver Nvida)
Bon hez moi j'ai:
Section "Screen"
Identifier "Default Screen"
Device "nVidia Corporation G70 [GeForce Go 7600]"
Monitor "Écran générique"
DefaultDepth 24
SubSection "Display"
Modes "1440x900"
EndSubSection
EndSection
Donc deja vire le virtual et adapte ta config.
Y'a 6000 posts sur les problèmes de config de X sous Ubuntu, recherche les et lis-les plz.
Hors ligne
Pages : 1