Contenu | Rechercher | Menus

Annonce

Si vous rencontrez des soucis à rester connecté sur le forum (ou si vous avez perdu votre mot de passe) déconnectez-vous et reconnectez-vous depuis cette page, en cochant la case "Me connecter automatiquement lors de mes prochaines visites".
Test de l'ISO d'Ubuntu francophone : nous avons besoin de testeurs pour la version francophone d'Ubuntu 14.04. Liens et informations ici.

Attention, une faille de sécurité dans bash a récemment été rapportée, il est recommandé de mettre à jour son système (plus de détails)

#1 Le 07/04/2014, à 20:42

Pierre_mira

[Résolu] Problème grub2 windows 8.1 et ubuntu studio13.10

Bonjour,
Premièrement, désolé de ma question qui a déjà été posé dans beaucoup de sujet. J'ai recherché pas mal avant de me résoudre à creer une discution, mais j'ai l'impression que ça ce problème se résoud en 'cas particuliers'..
J'essais d'installer ubuntu studio 13.10 et de garder windows 8 sur mon ordinateur.
J'ai lancé usbLive et semble avoir installer ubuntu correctement. Mais lors du redémarrage, j'ai un écran noir et :
"
minimal BASH-LIKE line editing is supported for the first word,
Tab list possible command completion anywhere else.
Tab list possible device or file completions
grub>
"
Du coup en cherchant un peu, j'ai installé boot repair (sur une session live usb) et lancé une réparation recommandée.
Et ça ne change rien..
Je précise que je ne connais pas ubuntu.

Voilà mon boot info : http://paste.ubuntu.com/7218139/

Merci d'avance pour les aides.
Pierre

Dernière modification par Pierre_mira (Le 11/04/2014, à 19:06)

Hors ligne

#2 Le 08/04/2014, à 00:00

jamesbad000

Re : [Résolu] Problème grub2 windows 8.1 et ubuntu studio13.10

Bonsoir,

Je ne vois pas ce qui cloche au vu du rapport boot info. Sauf peut-être que tu as utilisé un grub efi signé. Mais il me semble que si le problème venait de ça tu n'arriverais pas jusque là.

En attendant que quelqu'un propose mieux, peux tu essayer les commandes suivantes, et retourner ce qui est affiché.

ls
pager=1
set

Si la commande set retourne beaucoup de valeurs note en priorité les valeurs associées à
prefix, et root
(pager=1 permet de limiter l'affichage à une page à la fois. Utiliser la touche espace pour afficher la page suivant)

insmod normal
boot

ps : attention clavier qwerty : A <-> Q et m <-> ,


L'espace et le temps sont les modes par lesquels nous pensons, et non les conditions dans lesquelles nous vivons. (Signé Albert)

Hors ligne

#3 Le 08/04/2014, à 00:14

Pierre_mira

Re : [Résolu] Problème grub2 windows 8.1 et ubuntu studio13.10

Merci de la réponse !

Je tape :
ls
pager=1
set
dans le terminal sous une session live?

Désolé des questions qui sont surement évidente, mais je connais pas du tout ^^

Edit
Du coup j'ai fais ça, en appuyant sur entrée à chaque saut de ligne, il me renvoit ça comme code :

        ;;
        set-sink-formats)

        ;;
    esac;
    case $prev in 
        list-*)

        ;;
        describe-module | load-module)
            comps=$(__all_modules);
            COMPREPLY=($(compgen -W '${comps[*]}' -- "$cur"))
        ;;
        unload-module)
            comps=$(__loaded_modules);
            COMPREPLY=($(compgen -W '${comps[*]}' -- "$cur"))
        ;;
        load-sample-dir-lazy)
            _filedir -d
        ;;
        play-file)
            _filedir
        ;;
        *sink-input*)
            comps=$(__sink_inputs);
            COMPREPLY=($(compgen -W '${comps[*]}' -- "$cur"))
        ;;
        *source-output*)
            comps=$(__source_outputs);
            COMPREPLY=($(compgen -W '${comps[*]}' -- "$cur"))
        ;;
        *sink*)
            comps=$(__sinks);
            COMPREPLY=($(compgen -W '${comps[*]}' -- "$cur"))
        ;;
        *source*)
            comps=$(__sources);
            COMPREPLY=($(compgen -W '${comps[*]}' -- "$cur"))
        ;;
        set-card*)
            comps=$(__cards);
            COMPREPLY=($(compgen -W '${comps[*]}' -- "$cur"))
        ;;
        set-port-*)
            comps=$(__cards);
            COMPREPLY=($(compgen -W '${comps[*]}' -- "$cur"))
        ;;
        set-log-target)
            COMPREPLY=($(compgen -W 'auto syslog stderr file: newfile:' -- "$cur"))
        ;;
        set-log-level)
            COMPREPLY=($(compgen -W '{0..4}' -- "$cur"))
        ;;
        set-log-meta | set-log-time | suspend)
            COMPREPLY=($(compgen -W 'true false' -- "$cur"))
        ;;
    esac;
    case $cur in 
        -*)
            COMPREPLY=($(compgen -W '${flags[*]}' -- "$cur"))
        ;;
        suspend)
            COMPREPLY=($(compgen -W 'suspend suspend-sink suspend-source' -- "$cur"))
        ;;
        load-sample)
            COMPREPLY=($(compgen -W 'load-sample load-sample-lazy load-sample-dir-lazy' -- "$cur"))
        ;;
        *)
            [[ -z $command ]] && COMPREPLY=($(compgen -W '${commands[*]}' -- "$cur"))
        ;;
    esac
}
_pactl () 
{ 
    local cur prev words cword preprev command;
    local comps;
    local flags='-h --help --version -s --server= --client-name=';
    local list_types='short sinks sources sink-inputs source outputs cards
                    modules samples clients';
    local commands=(stat info list exit upload-sample play-sample remove-sample load-module unload-module move-sink-input move-source-output suspend-sink suspend-source set-card-profile set-sink-port set-source-port set-sink-volume set-source-volume set-sink-input-volume set-source-output-volume set-sink-mute set-source-mute set-sink-input-mute set-source-output-mute set-sink-formats set-port-latency-offset subscribe help);
    _init_completion -n = || return;
    preprev=${words[$cword-2]};
    for word in "${COMP_WORDS[@]}";
    do
        if in_array "$word" "${commands[@]}"; then
            command=$word;
            break;
        fi;
    done;
    case $preprev in 
        list)
            COMPREPLY=($(compgen -W 'short' -- "$cur"))
        ;;
        play-sample)
            comps=$(__sinks);
            COMPREPLY=($(compgen -W '${comps[*]}' -- "$cur"))
        ;;
        move-sink-input)
            comps=$(__sinks);
            COMPREPLY=($(compgen -W '${comps[*]}' -- "$cur"))
        ;;
        move-source-output)
            comps=$(__sources);
            COMPREPLY=($(compgen -W '${comps[*]}' -- "$cur"))
        ;;
        set-card-profile)
            comps=$(__profiles);
            COMPREPLY=($(compgen -W '${comps[*]}' -- "$cur"))
        ;;
        set-*-port)
            comps=$(__ports);
            COMPREPLY=($(compgen -W '${comps[*]}' -- "$cur"))
        ;;
        set-*-mute)
            COMPREPLY=($(compgen -W 'true false toggle' -- "$cur"))
        ;;
        set-sink-formats)

        ;;
        set-port-*)
            comps=$(__ports);
            COMPREPLY=($(compgen -W '${comps[*]}' -- "$cur"))
        ;;
        --server)
            compopt +o nospace;
            _known_hosts_real "$cur"
        ;;
    esac;
    [[ -n $COMPREPLY ]] && return 0;
    case $prev in 
        list)
            COMPREPLY=($(compgen -W '${list_types[*]}' -- "$cur"))
        ;;
        stat)
            COMPREPLY=($(compgen -W 'short' -- "$cur"))
        ;;
        upload-sample)
            _filedir
        ;;
        play-sample)

        ;;
        remove-sample)

        ;;
        load-module)
            comps=$(__all_modules);
            COMPREPLY=($(compgen -W '${comps[*]}' -- "$cur"))
        ;;
        unload-module)
            comps=$(__loaded_modules);
            COMPREPLY=($(compgen -W '${comps[*]}' -- "$cur"))
        ;;
        set-card*)
            comps=$(__cards);
            COMPREPLY=($(compgen -W '${comps[*]}' -- "$cur"))
        ;;
        *sink-input*)
            comps=$(__sink_inputs);
            COMPREPLY=($(compgen -W '${comps[*]}' -- "$cur"))
        ;;
        *source-output*)
            comps=$(__source_outputs);
            COMPREPLY=($(compgen -W '${comps[*]}' -- "$cur"))
        ;;
        set-sink-formats)
            comps=$(__sinks_idx);
            COMPREPLY=($(compgen -W '${comps[*]}' -- "$cur"))
        ;;
        *sink*)
            comps=$(__sinks);
            COMPREPLY=($(compgen -W '${comps[*]}' -- "$cur"))
        ;;
        *source*)
            comps=$(__sources);
            COMPREPLY=($(compgen -W '${comps[*]}' -- "$cur"))
        ;;
        set-port*)
            comps=$(__cards);
            COMPREPLY=($(compgen -W '${comps[*]}' -- "$cur"))
        ;;
        -s)
            _known_hosts_real "$cur"
        ;;
    esac;
    [[ -n $COMPREPLY ]] && return 0;
    case $cur in 
        --server=*)
            cur=${cur#*=};
            _known_hosts_real "$cur"
        ;;
        -*)
            COMPREPLY=($(compgen -W '${flags[*]}' -- "$cur"));
            [[ $COMPREPLY == *= ]] && compopt -o nospace
        ;;
        *)
            [[ -z $command ]] && COMPREPLY=($(compgen -W '${commands[*]}' -- "$cur"))
        ;;
    esac
}
_padsp () 
{ 
    local cur prev;
    local flags='-h -s -n -m -M -S -D -d';
    _get_comp_words_by_ref cur prev;
    case $cur in 
        -*)
            COMPREPLY=($(compgen -W '${flags[*]}' -- "$cur"))
        ;;
    esac;
    case $prev in 
        -s)
            _known_hosts_real "$cur"
        ;;
    esac
}
_parse_help () 
{ 
    eval local cmd=$( quote "$1" );
    local line;
    { 
        case $cmd in 
            -)
                cat
            ;;
            *)
                "$( dequote "$cmd" )" ${2:---help} 2>&1
            ;;
        esac
    } | while read -r line; do
        [[ $line == *([ '	'])-* ]] || continue;
        while [[ $line =~ ((^|[^-])-[A-Za-z0-9?][[:space:]]+)\[?[A-Z0-9]+\]? ]]; do
            line=${line/"${BASH_REMATCH[0]}"/"${BASH_REMATCH[1]}"};
        done;
        __parse_options "${line// or /, }";
    done
}
_parse_usage () 
{ 
    eval local cmd=$( quote "$1" );
    local line match option i char;
    { 
        case $cmd in 
            -)
                cat
            ;;
            *)
                "$( dequote "$cmd" )" ${2:---usage} 2>&1
            ;;
        esac
    } | while read -r line; do
        while [[ $line =~ \[[[:space:]]*(-[^]]+)[[:space:]]*\] ]]; do
            match=${BASH_REMATCH[0]};
            option=${BASH_REMATCH[1]};
            case $option in 
                -?(\[)+([a-zA-Z0-9?]))
                    for ((i=1; i < ${#option}; i++ ))
                    do
                        char=${option:i:1};
                        [[ $char != '[' ]] && printf '%s\n' -$char;
                    done
                ;;
                *)
                    __parse_options "$option"
                ;;
            esac;
            line=${line#*"$match"};
        done;
    done
}
_pasuspender () 
{ 
    local cur prev;
    local flags='-h --help --version -s --server=';
    _init_completion -n = || return;
    case $cur in 
        --server=*)
            cur=${cur#*=};
            _known_hosts_real "$cur"
        ;;
        -*)
            COMPREPLY=($(compgen -W '${flags[*]}' -- "$cur"));
            [[ $COMPREPLY == *= ]] && compopt -o nospace
        ;;
    esac;
    case $prev in 
        -s)
            _known_hosts_real "$cur"
        ;;
    esac
}
_pci_ids () 
{ 
    COMPREPLY+=($( compgen -W         "$( PATH="$PATH:/sbin" lspci -n | awk '{print $3}')" -- "$cur" ))
}
_pgids () 
{ 
    COMPREPLY=($( compgen -W '$( command ps axo pgid= )' -- "$cur" ))
}
_pids () 
{ 
    COMPREPLY=($( compgen -W '$( command ps axo pid= )' -- "$cur" ))
}
_pnames () 
{ 
    COMPREPLY=($( compgen -X '<defunct>' -W '$( command ps axo command= | \
        sed -e "s/ .*//" -e "s:.*/::" -e "s/:$//" -e "s/^[[(-]//" \
            -e "s/[])]$//" | sort -u )' -- "$cur" ))
}
_poff () 
{ 
    local prev cur conns;
    [ -r /etc/ppp/peers/ ] || return 0;
    COMPREPLY=();
    prev=${COMP_WORDS[COMP_CWORD-1]};
    cur=${COMP_WORDS[COMP_CWORD]};
    conns=$(\ls --color=none /etc/ppp/peers | egrep -v '(\.bak|~)$');
    if [[ "$cur" == -* ]]; then
        COMPREPLY=($(compgen -W '-r -d -c -a -h -v' -- $cur));
        return 0;
    fi;
    if [ $COMP_CWORD -eq 1 ] && [[ "$cur" != -* ]] || [[ "$prev" == -* ]]; then
        COMPREPLY=($(compgen -o filenames -W "$conns" $cur));
    fi;
    return 0
}
_pon () 
{ 
    local cur conns;
    [ -r /etc/ppp/peers/ ] || return 0;
    COMPREPLY=();
    cur=${COMP_WORDS[COMP_CWORD]};
    conns=$(\ls --color=none /etc/ppp/peers | egrep -v '(\.bak|~)$');
    if [ $COMP_CWORD -eq 1 ]; then
        COMPREPLY=($(compgen -o filenames -W "$conns" $cur));
    fi;
    return 0
}
_pulseaudio () 
{ 
    local cur prev words cword;
    local flags='-h --help --version --dump-conf --dump-resample-methods --cleanup-shm
                --start -k --kill --check --system= -D --daemonize= --fail= --high-priority=
                --realtime= --disallow-module-loading= --disallow-exit= --exit-idle-time=
                --scache-idle-time= --log-level= -v --log-target= --log-meta= --log-time=
                --log-backtrace= -p --dl-search-path= --resample-method= --use-pit-file=
                --no-cpu-limit= --disable-shm= -L --load= -F --file= -C -n';
    _init_completion -n = || return;
    case $cur in 
        --system=* | --daemonize=* | --fail=* | --high-priority=* | --realtime=* | --disallow-*=* | --log-meta=* | --log-time=* | --use-pid-file=* | --no-cpu-limit=* | --disable-shm=*)
            cur=${cur#*=};
            COMPREPLY=($(compgen -W 'true false' -- "$cur"))
        ;;
        --log-target=*)
            cur=${cur#*=};
            COMPREPLY=($(compgen -W 'auto syslog stderr file: newfile:' -- "$cur"))
        ;;
        --log-level=*)
            cur=${cur#*=};
            COMPREPLY=($(compgen -W '{0..4}' -- "$cur"))
        ;;
        --dl-search-path=*)
            cur=${cur#*=};
            _filedir -d
        ;;
        --file=*)
            cur=${cur#*=};
            _filedir
        ;;
        --resample-method=*)
            cur=${cur#*=};
            comps=$(__resample_methods);
            COMPREPLY=($(compgen -W '${comps[*]}' -- "$cur"))
        ;;
        --load=*)
            cur=${cur#*=};
            comps=$(__all_modules);
            COMPREPLY=($(compgen -W '${comps[*]}' -- "$cur"))
        ;;
        --*=*)

        ;;
        -*)
            COMPREPLY=($(compgen -W '${flags[*]}' -- "$cur"));
            [[ $COMPREPLY == *= ]] && compopt -o nospace
        ;;
    esac;
    case $prev in 
        -D)
            COMPREPLY=($(compgen -W 'true false' -- "$cur"))
        ;;
        -p)
            _filedir -d
        ;;
        -F)
            _filedir
        ;;
        -L)
            cur=${cur#*=};
            comps=$(__all_modules);
            COMPREPLY=($(compgen -W '${comps[*]}' -- "$cur"))
        ;;
    esac
}
_quote_readline_by_ref () 
{ 
    if [[ $1 == \'* ]]; then
        printf -v $2 %s "${1:1}";
    else
        printf -v $2 %q "$1";
    fi;
    [[ ${!2} == \$* ]] && eval $2=${!2}
}
_realcommand () 
{ 
    type -P "$1" > /dev/null && { 
        if type -p realpath > /dev/null; then
            realpath "$(type -P "$1")";
        else
            if type -p greadlink > /dev/null; then
                greadlink -f "$(type -P "$1")";
            else
                if type -p readlink > /dev/null; then
                    readlink -f "$(type -P "$1")";
                else
                    type -P "$1";
                fi;
            fi;
        fi
    }
}
_rl_enabled () 
{ 
    [[ "$( bind -v )" = *$1+([[:space:]])on* ]]
}
_root_command () 
{ 
    local PATH=$PATH:/sbin:/usr/sbin:/usr/local/sbin;
    local root_command=$1;
    _command
}
_service () 
{ 
    local cur prev words cword;
    _init_completion || return;
    [[ $cword -gt 2 ]] && return 0;
    if [[ $cword -eq 1 && $prev == ?(*/)service ]]; then
        _services;
        [[ -e /etc/mandrake-release ]] && _xinetd_services;
    else
        local sysvdirs;
        _sysvdirs;
        COMPREPLY=($( compgen -W '`sed -e "y/|/ /" \
            -ne "s/^.*\(U\|msg_u\)sage.*{\(.*\)}.*$/\2/p" \
            ${sysvdirs[0]}/${prev##*/} 2>/dev/null` start stop' -- "$cur" ));
    fi
}
_services () 
{ 
    local sysvdirs;
    _sysvdirs;
    local restore_nullglob=$(shopt -p nullglob);
    shopt -s nullglob;
    COMPREPLY=($( printf '%s\n' ${sysvdirs[0]}/!($_backup_glob|functions) ));
    $restore_nullglob;
    COMPREPLY+=($( systemctl list-units --full --all 2>/dev/null |         awk '$1 ~ /\.service$/ { sub("\\.service$", "", $1); print $1 }' ));
    COMPREPLY=($( compgen -W '${COMPREPLY[@]#${sysvdirs[0]}/}' -- "$cur" ))
}
_shells () 
{ 
    local shell rest;
    while read -r shell rest; do
        [[ $shell == /* && $shell == "$cur"* ]] && COMPREPLY+=($shell);
    done 2> /dev/null < /etc/shells
}
_signals () 
{ 
    local -a sigs=($( compgen -P "$1" -A signal "SIG${cur#$1}" ));
    COMPREPLY+=("${sigs[@]/#${1}SIG/${1}}")
}
_split_longopt () 
{ 
    if [[ "$cur" == --?*=* ]]; then
        prev="${cur%%?(\\)=*}";
        cur="${cur#*=}";
        return 0;
    fi;
    return 1
}
_sysvdirs () 
{ 
    sysvdirs=();
    [[ -d /etc/rc.d/init.d ]] && sysvdirs+=(/etc/rc.d/init.d);
    [[ -d /etc/init.d ]] && sysvdirs+=(/etc/init.d);
    [[ -f /etc/slackware-version ]] && sysvdirs=(/etc/rc.d)
}
_terms () 
{ 
    COMPREPLY+=($( compgen -W         "$( sed -ne 's/^\([^[:space:]#|]\{2,\}\)|.*/\1/p' /etc/termcap             2>/dev/null )" -- "$cur" ));
    COMPREPLY+=($( compgen -W "$( { toe -a 2>/dev/null || toe 2>/dev/null; }         | awk '{ print $1 }' | sort -u )" -- "$cur" ))
}
_tilde () 
{ 
    local result=0;
    if [[ $1 == \~* && $1 != */* ]]; then
        COMPREPLY=($( compgen -P '~' -u "${1#\~}" ));
        result=${#COMPREPLY[@]};
        [[ $result -gt 0 ]] && compopt -o filenames 2> /dev/null;
    fi;
    return $result
}
_ufw () 
{ 
    cur=${COMP_WORDS[COMP_CWORD]};
    prev=${COMP_WORDS[COMP_CWORD-1]};
    if [ $COMP_CWORD -eq 1 ]; then
        COMPREPLY=($( compgen -W "$(_ufw_commands)" $cur ));
    else
        if [ $COMP_CWORD -eq 2 ]; then
            case "$prev" in 
                app)
                    COMPREPLY=($( compgen -W "$(_ufw_app_commands)" $cur ))
                ;;
                status)
                    COMPREPLY=($( compgen -W "$(_ufw_status_commands)" $cur ))
                ;;
                delete)
                    COMPREPLY=($( compgen -W "$(_ufw_rule_commands)" $cur ))
                ;;
                logging)
                    COMPREPLY=($( compgen -W "$(_ufw_logging_commands)" $cur ))
                ;;
                show)
                    COMPREPLY=($( compgen -W "$(_ufw_show_commands)" $cur ))
                ;;
                default)
                    COMPREPLY=($( compgen -W "$(_ufw_default_commands)" $cur ))
                ;;
            esac;
        fi;
    fi
}
_ufw_app_commands () 
{ 
    ufw --help | sed -e '1,/^Application profile commands:/d' -e '/^ [^ ]/!d' -e 's/[ \t]\+app[ \t]\+\([a-z|]\+\)[ \t]\+.*/\1/g'
}
_ufw_commands () 
{ 
    commands=$(ufw --help | sed -e '1,/^Commands:/d' -e '/^Application profile commands:/Q' -e 's/^[ \t]\+\([a-z|]\+\)[ \t]\+.*/\1/g' -e 's/|/ /g' | uniq);
    echo "$commands app"
}
_ufw_default_commands () 
{ 
    echo "allow deny reject"
}
_ufw_logging_commands () 
{ 
    echo "off on low medium high full"
}
_ufw_rule_commands () 
{ 
    echo "`_ufw_default_commands` limit"
}
_ufw_show_commands () 
{ 
    echo "raw"
}
_ufw_status_commands () 
{ 
    echo "numbered verbose"
}
_uids () 
{ 
    if type getent &>/dev/null; then
        COMPREPLY=($( compgen -W '$( getent passwd | cut -d: -f3 )' -- "$cur" ));
    else
        if type perl &>/dev/null; then
            COMPREPLY=($( compgen -W '$( perl -e '"'"'while (($uid) = (getpwent)[2]) { print $uid . "\n" }'"'"' )' -- "$cur" ));
        else
            COMPREPLY=($( compgen -W '$( cut -d: -f3 /etc/passwd )' -- "$cur" ));
        fi;
    fi
}
_update_initramfs () 
{ 
    local cur prev valid_options;
    cur=$(_get_cword);
    prev=${COMP_WORDS[COMP_CWORD-1]};
    if [[ "$prev" == '-k' ]]; then
        _kernel_versions;
        COMPREPLY=($( compgen -W '${COMPREPLY[@]} all' -- "$cur" ));
        return;
    fi;
    valid_options=$( update-initramfs -h 2>&1 | 		sed -e '/^ -/!d;s/^ \(-\w\+\).*/\1/' );
    COMPREPLY=($( compgen -W "$valid_options" -- $cur ))
}
_upstart_events () 
{ 
    ( cd /etc/init && egrep --color=auto '^[[:space:]]*emits ' *.conf | cut -d: -f2- | sed 's/^[[:space:]]*emits //g' | tr ' ' '\n' | awk '{print $NF}' | grep --color=auto -v ^$ | sort -u )
}
_upstart_initctl () 
{ 
    _get_comp_words_by_ref cur prev;
    COMPREPLY=();
    case "$prev" in 
        start)
            COMPREPLY=($(compgen -W "-n --no-wait $(_upstart_startable_jobs)" -- ${cur}));
            return 0
        ;;
        stop)
            COMPREPLY=($(compgen -W "-n --no-wait $(_upstart_stoppable_jobs)" -- ${cur}));
            return 0
        ;;
        emit)
            COMPREPLY=($(compgen -W "-n --no-wait $(_upstart_events)" -- ${cur}));
            return 0
        ;;
        -i | --ignore-events)
            for cmd in check-config;
            do
                cwords=${COMP_WORDS[@]##};
                filtered_cwords=${COMP_WORDS[@]##${cmd}};
                if [ "$filtered_cwords" != "$cwords" ]; then
                    COMPREPLY=($(compgen -W "$(_upstart_jobs)" -- ${cur}));
                    return 0;
                fi;
            done
        ;;
        -e | --enumerate)
            for cmd in show-config;
            do
                cwords=${COMP_WORDS[@]##};
                filtered_cwords=${COMP_WORDS[@]##${cmd}};
                if [ "$filtered_cwords" != "$cwords" ]; then
                    COMPREPLY=($(compgen -W "$(_upstart_jobs)" -- ${cur}));
                    return 0;
                fi;
            done
        ;;
        reload | restart)
            COMPREPLY=($(compgen -W "-n --no-wait $(_upstart_stoppable_jobs)" -- ${cur}));
            return 0
        ;;
        status)
            COMPREPLY=($(compgen -W "$(_upstart_jobs)" -- ${cur}));
            return 0
        ;;
        check-config)
            COMPREPLY=($(compgen -W "-w --warn -i --ignore-events= $(_upstart_jobs)" -- ${cur}));
            return 0
        ;;
        show-config)
            COMPREPLY=($(compgen -W "-e --enumerate $(_upstart_jobs)" -- ${cur}));
            return 0
        ;;
        -n | --no-wait)
            for cmd in start stop restart emit;
            do
                cwords=${COMP_WORDS[@]##};
                filtered_cwords=${COMP_WORDS[@]##${cmd}};
                if [ "$filtered_cwords" != "$cwords" ]; then
                    case "$cmd" in 
                        start)
                            COMPREPLY=($(compgen -W "$(_upstart_startable_jobs)" -- ${cur}))
                        ;;
                        stop)
                            COMPREPLY=($(compgen -W "$(_upstart_stoppable_jobs)" -- ${cur}))
                        ;;
                        restart)
                            COMPREPLY=($(compgen -W "$(_upstart_stoppable_jobs)" -- ${cur}))
                        ;;
                        emit)
                            COMPREPLY=($(compgen -W "$(_upstart_events)" -- ${cur}))
                        ;;
                    esac;
                    return 0;
                fi;
            done
        ;;
        --help | --version)
            COMPREPLY=();
            return 0
        ;;
    esac;
    opts="--help --version -q --quiet -v --verbose --session --system --dest=";
    cmds=$(initctl help|grep "^  [^ ]"|awk '{print $1}');
    COMPREPLY=($(compgen -W "${opts} ${cmds}" -- ${cur}))
}
_upstart_jobs () 
{ 
    initctl list | awk '{print $1}' | sort -u
}
_upstart_reload () 
{ 
    COMPREPLY=();
    _get_comp_words_by_ref cur prev;
    opts="--help --version -q --quiet -v --verbose --session --system --dest=";
    case "$prev" in 
        --help | --version)
            COMPREPLY=();
            return 0
        ;;
    esac;
    COMPREPLY=($(compgen -W "$opts $(_upstart_stoppable_jobs)" -- ${cur}));
    return 0
}
_upstart_restart () 
{ 
    COMPREPLY=();
    _get_comp_words_by_ref cur prev;
    opts="--help --version -q --quiet -v --verbose --session --system --dest=         -n --no-wait";
    case "$prev" in 
        --help | --version)
            COMPREPLY=();
            return 0
        ;;
    esac;
    COMPREPLY=($(compgen -W "$opts $(_upstart_stoppable_jobs)" -- ${cur}));
    return 0
}
_upstart_start () 
{ 
    COMPREPLY=();
    _get_comp_words_by_ref cur prev;
    opts="--help --version -q --quiet -v --verbose --session --system --dest=         -n --no-wait";
    case "$prev" in 
        --help | --version)
            COMPREPLY=();
            return 0
        ;;
    esac;
    COMPREPLY=($(compgen -W "$opts $(_upstart_startable_jobs)" -- ${cur}));
    return 0
}
_upstart_startable_jobs () 
{ 
    initctl list | cut -d\, -f1 | awk '$2 == "stop/waiting" {print $1}'
}
_upstart_status () 
{ 
    COMPREPLY=();
    _get_comp_words_by_ref cur prev;
    opts="--help --version -q -d --detail -e --enumerate --quiet -v --verbose --session --system --dest=";
    case "$prev" in 
        --help | --version)
            COMPREPLY=();
            return 0
        ;;
    esac;
    COMPREPLY=($(compgen -W "$opts $(_upstart_jobs)" -- ${cur}));
    return 0
}
_upstart_stop () 
{ 
    COMPREPLY=();
    _get_comp_words_by_ref cur prev;
    opts="--help --version -q --quiet -v --verbose --session --system --dest=         -n --no-wait";
    case "$prev" in 
        --help | --version)
            COMPREPLY=();
            return 0
        ;;
    esac;
    COMPREPLY=($(compgen -W "$opts $(_upstart_stoppable_jobs)" -- ${cur}));
    return 0
}
_upstart_stoppable_jobs () 
{ 
    initctl list | cut -d\, -f1 | awk '$2 == "start/running" {print $1}'
}
_upvar () 
{ 
    if unset -v "$1"; then
        if (( $# == 2 )); then
            eval $1=\"\$2\";
        else
            eval $1=\(\"\${@:2}\"\);
        fi;
    fi
}
_upvars () 
{ 
    if ! (( $# )); then
        echo "${FUNCNAME[0]}: usage: ${FUNCNAME[0]} [-v varname" "value] | [-aN varname [value ...]] ..." 1>&2;
        return 2;
    fi;
    while (( $# )); do
        case $1 in 
            -a*)
                [[ -n ${1#-a} ]] || { 
                    echo "bash: ${FUNCNAME[0]}: \`$1': missing" "number specifier" 1>&2;
                    return 1
                };
                printf %d "${1#-a}" &>/dev/null || { 
                    echo "bash:" "${FUNCNAME[0]}: \`$1': invalid number specifier" 1>&2;
                    return 1
                };
                [[ -n "$2" ]] && unset -v "$2" && eval $2=\(\"\${@:3:${1#-a}}\"\) && shift $((${1#-a} + 2)) || { 
                    echo "bash: ${FUNCNAME[0]}:" "\`$1${2+ }$2': missing argument(s)" 1>&2;
                    return 1
                }
            ;;
            -v)
                [[ -n "$2" ]] && unset -v "$2" && eval $2=\"\$3\" && shift 3 || { 
                    echo "bash: ${FUNCNAME[0]}: $1: missing" "argument(s)" 1>&2;
                    return 1
                }
            ;;
            *)
                echo "bash: ${FUNCNAME[0]}: $1: invalid option" 1>&2;
                return 1
            ;;
        esac;
    done
}
_usb_ids () 
{ 
    COMPREPLY+=($( compgen -W         "$( PATH="$PATH:/sbin" lsusb | awk '{print $6}' )" -- "$cur" ))
}
_user_at_host () 
{ 
    local cur prev words cword;
    _init_completion -n : || return;
    if [[ $cur == *@* ]]; then
        _known_hosts_real "$cur";
    else
        COMPREPLY=($( compgen -u -- "$cur" ));
    fi;
    return 0
}
_usergroup () 
{ 
    if [[ $cur = *\\\\* || $cur = *:*:* ]]; then
        return;
    else
        if [[ $cur = *\\:* ]]; then
            local prefix;
            prefix=${cur%%*([^:])};
            prefix=${prefix//\\};
            local mycur="${cur#*[:]}";
            if [[ $1 == -u ]]; then
                _allowed_groups "$mycur";
            else
                local IFS='
';
                COMPREPLY=($( compgen -g -- "$mycur" ));
            fi;
            COMPREPLY=($( compgen -P "$prefix" -W "${COMPREPLY[@]}" ));
        else
            if [[ $cur = *:* ]]; then
                local mycur="${cur#*:}";
                if [[ $1 == -u ]]; then
                    _allowed_groups "$mycur";
                else
                    local IFS='
';
                    COMPREPLY=($( compgen -g -- "$mycur" ));
                fi;
            else
                if [[ $1 == -u ]]; then
                    _allowed_users "$cur";
                else
                    local IFS='
';
                    COMPREPLY=($( compgen -u -- "$cur" ));
                fi;
            fi;
        fi;
    fi
}
_userland () 
{ 
    local userland=$( uname -s );
    [[ $userland == @(Linux|GNU/*) ]] && userland=GNU;
    [[ $userland == $1 ]]
}
_variables () 
{ 
    if [[ $cur =~ ^(\$\{?)([A-Za-z0-9_]*)$ ]]; then
        [[ $cur == *{* ]] && local suffix=} || local suffix=;
        COMPREPLY+=($( compgen -P ${BASH_REMATCH[1]} -S "$suffix" -v --             "${BASH_REMATCH[2]}" ));
        return 0;
    fi;
    return 1
}
_xfunc () 
{ 
    set -- "$@";
    local srcfile=$1;
    shift;
    declare -F $1 &>/dev/null || { 
        local compdir=./completions;
        [[ $BASH_SOURCE == */* ]] && compdir="${BASH_SOURCE%/*}/completions";
        . "$compdir/$srcfile"
    };
    "$@"
}
_xinetd_services () 
{ 
    local xinetddir=/etc/xinetd.d;
    if [[ -d $xinetddir ]]; then
        local restore_nullglob=$(shopt -p nullglob);
        shopt -s nullglob;
        local -a svcs=($( printf '%s\n' $xinetddir/!($_backup_glob) ));
        $restore_nullglob;
        COMPREPLY+=($( compgen -W '${svcs[@]#$xinetddir/}' -- "$cur" ));
    fi
}
command_not_found_handle () 
{ 
    if [ -x /usr/lib/command-not-found ]; then
        /usr/lib/command-not-found -- "$1";
        return $?;
    else
        if [ -x /usr/share/command-not-found/command-not-found ]; then
            /usr/share/command-not-found/command-not-found -- "$1";
            return $?;
        else
            printf "%s: command not found\n" "$1" 1>&2;
            return 127;
        fi;
    fi
}
dequote () 
{ 
    eval printf %s "$1" 2> /dev/null
}
in_array () 
{ 
    local i;
    for i in "${@:2}";
    do
        [[ $1 = "$i" ]] && return;
    done
}
quote () 
{ 
    local quoted=${1//\'/\'\\\'\'};
    printf "'%s'" "$quoted"
}
quote_readline () 
{ 
    local quoted;
    _quote_readline_by_ref "$1" ret;
    printf %s "$ret"
}

Dernière modification par Pierre_mira (Le 08/04/2014, à 00:24)

Hors ligne

#4 Le 08/04/2014, à 00:52

Babdu89

Re : [Résolu] Problème grub2 windows 8.1 et ubuntu studio13.10

Bonsoir.
Je ne sais pas si çà peut influencer le démarrage, mais une installation dual boot en UEFI,  le secure boot est désactivé.
Qu'est-ce que çà donne ,en le ré-activant?.

=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
SecureBoot disabled. (maybe sec-boot, Please report this message to boot.repair@gmail.com)

@+.   Babdu89   .


J'ai découvert Ubuntu avec la 07.10.... Et alors?!...  Depuis je regarde de temps en temps si Windows marche toujours....

Hors ligne

#5 Le 08/04/2014, à 01:09

Pierre_mira

Re : [Résolu] Problème grub2 windows 8.1 et ubuntu studio13.10

Merci de la réponse, mais je viens d'essayer, ça ne change rien...

Hors ligne

#6 Le 08/04/2014, à 02:28

jamesbad000

Re : [Résolu] Problème grub2 windows 8.1 et ubuntu studio13.10

Autant pour moi. J'aurais du préciser que les commandes sont à utiliser à la suite de l'invite de commande

grub>

qui est affichée au démarrage.

De plus oublie les 2 dernières commande que j'ai indiquées,. Elles ne servent à rien car si l'invite grub> est affichée et non grub rescue>, c'est que le module "normal" est déjà actif.

Et mieux vaut connaitre le résultat de set et ls avant d'envisager les commandes suivantes...

Dernière modification par jamesbad000 (Le 08/04/2014, à 02:32)


L'espace et le temps sont les modes par lesquels nous pensons, et non les conditions dans lesquelles nous vivons. (Signé Albert)

Hors ligne

#7 Le 08/04/2014, à 08:23

malbo

Re : [Résolu] Problème grub2 windows 8.1 et ubuntu studio13.10

Ton Boot-Info est là :

 Boot Info Script e7fc706 + Boot-Repair extra info      [Boot-Info 23Dec2013]


============================= Boot Info Summary: ===============================

 => No boot loader is installed in the MBR of /dev/sda.
 => Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdb.

sda1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  Windows 8/2012: FAT32
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /EFI/Boot/bkpbootx64.efi /EFI/Boot/bootx64.efi 
                       /EFI/ubuntustudio/MokManager.efi 
                       /EFI/ubuntustudio/grubx64.efi 
                       /EFI/ubuntustudio/shimx64.efi 
                       /EFI/Microsoft/Boot/bkpbootmgfw.efi 
                       /EFI/Microsoft/Boot/bootmgfw.efi 
                       /EFI/Microsoft/Boot/bootmgr.efi 
                       /EFI/Microsoft/Boot/bootx64.efi 
                       /EFI/Microsoft/Boot/memtest.efi

sda2: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /bootmgr /Boot/BCD

sda3: __________________________________________________________________________

    File system:       
    Boot sector type:  -
    Boot sector info: 
    Mounting failed:   mount: unknown filesystem type ''

sda4: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /bootmgr /Boot/BCD /Windows/System32/winload.exe

sda5: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sda6: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sda7: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sda8: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  According to the info in the boot sector, sda8 starts 
                       at sector 0. But according to the info from fdisk, 
                       sda8 starts at sector 1420040192.
    Operating System:  
    Boot files:        

sda9: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sda10: _________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sda11: _________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 13.10 
    Boot files:        /boot/grub/grub.cfg /etc/fstab

sdb1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  SYSLINUX 4.04 2011-04-18
    Boot sector info:  Syslinux looks at sector 6044976 of /dev/sdb1 for its 
                       second stage. SYSLINUX is installed in the  directory. 
                       No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /boot/grub/grub.cfg /syslinux/syslinux.cfg 
                       /EFI/BOOT/grubx64.efi /ldlinux.sys

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________

Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1                   1 1,953,525,167 1,953,525,167  ee GPT


GUID Partition Table detected.

Partition    Start Sector    End Sector  # of Sectors System
/dev/sda1           2,048       616,447       614,400 EFI System partition
/dev/sda2         616,448     2,459,647     1,843,200 -
/dev/sda3       2,459,648     2,721,791       262,144 Microsoft Reserved Partition (Windows)
/dev/sda4       2,721,792   414,773,247   412,051,456 Data partition (Windows/Linux)
/dev/sda5     537,653,248   538,370,047       716,800 -
/dev/sda6     538,370,048   784,127,999   245,757,952 Data partition (Windows/Linux)
/dev/sda7     784,130,048 1,420,040,191   635,910,144 Data partition (Windows/Linux)
/dev/sda8   1,420,040,192 1,911,558,143   491,517,952 Data partition (Windows/Linux)
/dev/sda9   1,911,560,192 1,953,523,711    41,963,520 -
/dev/sda10    414,773,248   432,351,231    17,577,984 Swap partition (Linux)
/dev/sda11    432,351,232   537,653,247   105,302,016 Data partition (Linux)

Drive: sdb _____________________________________________________________________

Disk /dev/sdb: 4009 MB, 4009754624 bytes
145 heads, 48 sectors/track, 1125 cylinders, total 7831552 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdb1    *             48     7,831,551     7,831,504   b W95 FAT32


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/loop0                                              squashfs   
/dev/sda1        0052-39AA                              vfat       SYSTEM
/dev/sda10       932498a7-6348-4d5e-87bc-6c0a48883943   swap       
/dev/sda11       beff59cc-cc75-48ad-9160-49cb2e14c5a8   ext4       
/dev/sda2        365ACDF25ACDAF45                       ntfs       Recovery
/dev/sda4        AE48D23848D1FF51                       ntfs       OS
/dev/sda5        AE462DC4462D8E61                       ntfs       
/dev/sda6        EA6EE7856EE74941                       ntfs       Déchets Logiciels
/dev/sda7        981C36271C3600B4                       ntfs       DATA
/dev/sda8        3ACE4935CE48EB29                       ntfs       Multimédia
/dev/sda9        00EED7E9EED7D4CE                       ntfs       Restore
/dev/sdb1        8A02-4D1D                              vfat       MYLINUXLIVE

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/loop0       /rofs                    squashfs   (ro,noatime)
/dev/sdb1        /cdrom                   vfat       (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)


========================== sda11/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
set default="0"

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}

function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}

function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt11'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt11 --hint-efi=hd0,gpt11 --hint-baremetal=ahci0,gpt11  beff59cc-cc75-48ad-9160-49cb2e14c5a8
else
  search --no-floppy --fs-uuid --set=root beff59cc-cc75-48ad-9160-49cb2e14c5a8
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=en_US
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
  set timeout=10
else
  set timeout=10
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=cyan/blue
set menu_color_highlight=white/blue
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/09_lowlatency ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'UbuntuStudio GNU/Linux (lowlatency)' --class ubuntustudio --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-beff59cc-cc75-48ad-9160-49cb2e14c5a8' {
recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	insmod part_gpt
	insmod ext2
	set root='hd0,gpt11'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt11 --hint-efi=hd0,gpt11 --hint-baremetal=ahci0,gpt11  beff59cc-cc75-48ad-9160-49cb2e14c5a8
	else
	  search --no-floppy --fs-uuid --set=root beff59cc-cc75-48ad-9160-49cb2e14c5a8
	fi
	linux	/boot/vmlinuz-3.11.0-11-lowlatency root=UUID=beff59cc-cc75-48ad-9160-49cb2e14c5a8 ro   quiet splash $vt_handoff
	initrd	/boot/initrd.img-3.11.0-11-lowlatency
}

### END /etc/grub.d/09_lowlatency ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'UbuntuStudio GNU/Linux' --class ubuntustudio --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-beff59cc-cc75-48ad-9160-49cb2e14c5a8' {
recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	insmod part_gpt
	insmod ext2
	set root='hd0,gpt11'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt11 --hint-efi=hd0,gpt11 --hint-baremetal=ahci0,gpt11  beff59cc-cc75-48ad-9160-49cb2e14c5a8
	else
	  search --no-floppy --fs-uuid --set=root beff59cc-cc75-48ad-9160-49cb2e14c5a8
	fi
	linux	/boot/vmlinuz-3.11.0-19-generic.efi.signed root=UUID=beff59cc-cc75-48ad-9160-49cb2e14c5a8 ro   quiet splash $vt_handoff
	initrd	/boot/initrd.img-3.11.0-19-generic
}
submenu 'Advanced options for UbuntuStudio GNU/Linux' $menuentry_id_option 'gnulinux-advanced-beff59cc-cc75-48ad-9160-49cb2e14c5a8' {
	menuentry 'UbuntuStudio GNU/Linux, with Linux 3.11.0-19-generic' --class ubuntustudio --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.11.0-19-generic-advanced-beff59cc-cc75-48ad-9160-49cb2e14c5a8' {
	recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt11'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt11 --hint-efi=hd0,gpt11 --hint-baremetal=ahci0,gpt11  beff59cc-cc75-48ad-9160-49cb2e14c5a8
		else
		  search --no-floppy --fs-uuid --set=root beff59cc-cc75-48ad-9160-49cb2e14c5a8
		fi
		echo	'Loading Linux 3.11.0-19-generic ...'
		linux	/boot/vmlinuz-3.11.0-19-generic.efi.signed root=UUID=beff59cc-cc75-48ad-9160-49cb2e14c5a8 ro   quiet splash $vt_handoff
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-3.11.0-19-generic
	}
	menuentry 'UbuntuStudio GNU/Linux, with Linux 3.11.0-19-generic (recovery mode)' --class ubuntustudio --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.11.0-19-generic-recovery-beff59cc-cc75-48ad-9160-49cb2e14c5a8' {
	recordfail
		load_video
		insmod gzio
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt11'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt11 --hint-efi=hd0,gpt11 --hint-baremetal=ahci0,gpt11  beff59cc-cc75-48ad-9160-49cb2e14c5a8
		else
		  search --no-floppy --fs-uuid --set=root beff59cc-cc75-48ad-9160-49cb2e14c5a8
		fi
		echo	'Loading Linux 3.11.0-19-generic ...'
		linux	/boot/vmlinuz-3.11.0-19-generic.efi.signed root=UUID=beff59cc-cc75-48ad-9160-49cb2e14c5a8 ro recovery nomodeset 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-3.11.0-19-generic
	}
	menuentry 'UbuntuStudio GNU/Linux, with Linux 3.11.0-11-lowlatency' --class ubuntustudio --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.11.0-11-lowlatency-advanced-beff59cc-cc75-48ad-9160-49cb2e14c5a8' {
	recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt11'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt11 --hint-efi=hd0,gpt11 --hint-baremetal=ahci0,gpt11  beff59cc-cc75-48ad-9160-49cb2e14c5a8
		else
		  search --no-floppy --fs-uuid --set=root beff59cc-cc75-48ad-9160-49cb2e14c5a8
		fi
		echo	'Loading Linux 3.11.0-11-lowlatency ...'
		linux	/boot/vmlinuz-3.11.0-11-lowlatency root=UUID=beff59cc-cc75-48ad-9160-49cb2e14c5a8 ro   quiet splash $vt_handoff
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-3.11.0-11-lowlatency
	}
	menuentry 'UbuntuStudio GNU/Linux, with Linux 3.11.0-11-lowlatency (recovery mode)' --class ubuntustudio --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.11.0-11-lowlatency-recovery-beff59cc-cc75-48ad-9160-49cb2e14c5a8' {
	recordfail
		load_video
		insmod gzio
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt11'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt11 --hint-efi=hd0,gpt11 --hint-baremetal=ahci0,gpt11  beff59cc-cc75-48ad-9160-49cb2e14c5a8
		else
		  search --no-floppy --fs-uuid --set=root beff59cc-cc75-48ad-9160-49cb2e14c5a8
		fi
		echo	'Loading Linux 3.11.0-11-lowlatency ...'
		linux	/boot/vmlinuz-3.11.0-11-lowlatency root=UUID=beff59cc-cc75-48ad-9160-49cb2e14c5a8 ro recovery nomodeset 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-3.11.0-11-lowlatency
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/25_custom ###

menuentry "Windows UEFI bkpbootmgfw.efi" {
search --fs-uuid --no-floppy --set=root 0052-39AA
chainloader (${root})/EFI/Microsoft/Boot/bkpbootmgfw.efi
}

menuentry "Windows Boot UEFI loader" {
search --fs-uuid --no-floppy --set=root 0052-39AA
chainloader (${root})/EFI/Boot/bkpbootx64.efi
}

menuentry "EFI/ubuntustudio/MokManager.efi" {
search --fs-uuid --no-floppy --set=root 0052-39AA
chainloader (${root})/EFI/ubuntustudio/MokManager.efi
}

menuentry "Windows UEFI recovery bkpbootmgfw.efi" {
search --fs-uuid --no-floppy --set=root 365ACDF25ACDAF45
chainloader (${root})/EFI/Microsoft/Boot/bkpbootmgfw.efi
}

menuentry "Windows Boot UEFI recovery" {
search --fs-uuid --no-floppy --set=root 365ACDF25ACDAF45
chainloader (${root})/EFI/Boot/bkpbootx64.efi
}
### END /etc/grub.d/25_custom ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows Boot Manager (UEFI on /dev/sda1)" --class windows --class os {
	insmod part_gpt
	insmod fat
	set root='hd0,gpt1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1  0052-39AA
	else
	  search --no-floppy --fs-uuid --set=root 0052-39AA
	fi
	chainloader /EFI/Microsoft/Boot/bootmgfw.efi
}
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
	fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda11/etc/fstab: ===============================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda11 during installation
UUID=beff59cc-cc75-48ad-9160-49cb2e14c5a8 /               ext4    errors=remount-ro 0       1
# /boot/efi was on /dev/sda1 during installation
#UUID=0052-39AA  /boot/efi       vfat    defaults        0       1
# swap was on /dev/sda10 during installation
UUID=932498a7-6348-4d5e-87bc-6c0a48883943 none            swap    sw              0       0
UUID=0052-39AA	/boot/efi	vfat	defaults	0	1
--------------------------------------------------------------------------------

=================== sda11: Location of files loaded by Grub: ===================

           GiB - GB             File                                 Fragment(s)


=========================== sdb1/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------

if loadfont /boot/grub/font.pf2 ; then
	set gfxmode=auto
	insmod efi_gop
	insmod efi_uga
	insmod gfxterm
	terminal_output gfxterm
fi

set menu_color_normal=white/black
set menu_color_highlight=black/light-gray

menuentry "Try Ubuntu Studio without installing" {
	set gfxpayload=keep
	linux	/casper/vmlinuz  file=/cdrom/preseed/ubuntustudio.seed boot=casper quiet splash --
	initrd	/casper/initrd.lz
}
menuentry "Install Ubuntu Studio" {
	set gfxpayload=keep
	linux	/casper/vmlinuz  file=/cdrom/preseed/ubuntustudio.seed boot=casper only-ubiquity quiet splash --
	initrd	/casper/initrd.lz
}
menuentry "OEM install (for manufacturers)" {
	set gfxpayload=keep
	linux	/casper/vmlinuz  file=/cdrom/preseed/ubuntustudio.seed boot=casper only-ubiquity quiet splash oem-config/enable=true --
	initrd	/casper/initrd.lz
}
menuentry "Check disc for defects" {
	set gfxpayload=keep
	linux	/casper/vmlinuz  boot=casper integrity-check quiet splash --
	initrd	/casper/initrd.lz
}
--------------------------------------------------------------------------------

========================= sdb1/syslinux/syslinux.cfg: ==========================

--------------------------------------------------------------------------------
# D-I config version 2.0
include menu.cfg
default vesamenu.c32
prompt 0
timeout 300
ui gfxboot bootlogo
--------------------------------------------------------------------------------

=================== sdb1: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)


================= sdb1: Location of files loaded by Syslinux: ==================

           GiB - GB             File                                 Fragment(s)


============== sdb1: Version of COM32(R) files used by Syslinux: ===============

 syslinux/chain.c32                 :  COM32R module (v4.xx)
 syslinux/gfxboot.c32               :  COM32R module (v4.xx)
 syslinux/vesamenu.c32              :  COM32R module (v4.xx)

======================== Unknown MBRs/Boot Sectors/etc: ========================

Unknown GPT Partiton Type
a4bb94ded106404da1a6bfd50179d6ac
Unknown GPT Partiton Type
a4bb94ded106404da1a6bfd50179d6ac
Unknown GPT Partiton Type
a4bb94ded106404da1a6bfd50179d6ac

=============================== StdErr Messages: ===============================

cat: /tmp/BootInfo-z3PEPibJ/Tmp_Log: No such file or directory
cat: /tmp/BootInfo-z3PEPibJ/Tmp_Log: No such file or directory
cat: /tmp/BootInfo-z3PEPibJ/Tmp_Log: No such file or directory
File descriptor 9 (/proc/4299/mounts) leaked on lvscan invocation. Parent PID 21280: bash
  No volume groups found

ADDITIONAL INFORMATION :
=================== log of boot-repair 2014-04-07__18h06 ===================
boot-repair version : 3.199~ppa40~saucy
boot-sav version : 3.199~ppa40~saucy
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 3.199~ppa40~saucy
boot-repair is executed in live-session (Ubuntu 13.10, saucy, Ubuntu, x86_64)
ls: cannot access /home/usr/.config: No such file or directory
CPU op-mode(s):        32-bit, 64-bit
BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntustudio.seed boot=casper quiet splash --

WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.


=================== os-prober:
/dev/sda1@/efi/Microsoft/Boot/bootmgfw.efi:Windows Boot Manager:Windows:efi
/dev/sda11:Ubuntu 13.10 (13.10):Ubuntu:linux

=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/sda1: LABEL="SYSTEM" UUID="0052-39AA" TYPE="vfat"
/dev/sda2: LABEL="Recovery" UUID="365ACDF25ACDAF45" TYPE="ntfs"
/dev/sda4: LABEL="OS" UUID="AE48D23848D1FF51" TYPE="ntfs"
/dev/sda5: UUID="AE462DC4462D8E61" TYPE="ntfs"
/dev/sda6: LABEL="DM-CM-)chets Logiciels" UUID="EA6EE7856EE74941" TYPE="ntfs"
/dev/sda7: LABEL="DATA" UUID="981C36271C3600B4" TYPE="ntfs"
/dev/sda8: LABEL="MultimM-CM-)dia" UUID="3ACE4935CE48EB29" TYPE="ntfs"
/dev/sda9: LABEL="Restore" UUID="00EED7E9EED7D4CE" TYPE="ntfs"
/dev/sda10: UUID="932498a7-6348-4d5e-87bc-6c0a48883943" TYPE="swap"
/dev/sda11: UUID="beff59cc-cc75-48ad-9160-49cb2e14c5a8" TYPE="ext4"
/dev/sdb1: LABEL="MYLINUXLIVE" UUID="8A02-4D1D" TYPE="vfat"


1 disks with OS, 2 OS : 1 Linux, 0 MacOS, 1 Windows, 0 unknown type OS.

Windows not detected by os-prober on sda4.

WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util sfdisk doesn't support GPT. Use GNU Parted.


WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.

Presence of EFI/Microsoft file detected: /mnt/boot-sav/sda1/EFI/Microsoft/Boot/bkpbootmgfw.efi
Presence of EFI/Microsoft file detected: /mnt/boot-sav/sda1/EFI/Microsoft/Boot/bootmgfw.efi
Presence of EFI/Microsoft file detected: /mnt/boot-sav/sda1/EFI/Microsoft/Boot/bootx64.efi
Presence of EFI/Boot file detected: /mnt/boot-sav/sda1/EFI/Boot/bkpbootx64.efi
Presence of EFI/Boot file detected: /mnt/boot-sav/sda1/EFI/Boot/bootx64.efi
Presence of .bkp file detected: /mnt/boot-sav/sda1/EFI/Boot/bkpbootx64.efi
Presence of .bkp file detected: /mnt/boot-sav/sda1/EFI/Microsoft/Boot/bkpbootmgfw.efi
Presence of EFI/Microsoft file detected: /mnt/boot-sav/sda2/EFI/Microsoft/Boot/bkpbootmgfw.efi
Presence of EFI/Microsoft file detected: /mnt/boot-sav/sda2/EFI/Microsoft/Boot/bootmgfw.efi
Presence of EFI/Microsoft file detected: /mnt/boot-sav/sda2/EFI/Microsoft/Boot/bootx64.efi
Presence of EFI/Boot file detected: /mnt/boot-sav/sda2/EFI/Boot/bkpbootx64.efi
Presence of EFI/Boot file detected: /mnt/boot-sav/sda2/EFI/Boot/bootx64.efi
Presence of .bkp file detected: /mnt/boot-sav/sda2/EFI/Boot/bkpbootx64.efi
Presence of .bkp file detected: /mnt/boot-sav/sda2/EFI/Microsoft/Boot/bkpbootmgfw.efi

=================== sda11/etc/grub.d/ :
drwxr-xr-x  2 root root     4096 Apr  7 17:44 grub.d
total 88
-rwxr-xr-x 1 root root  7850 Oct 10 17:48 00_header
-rwxr-xr-x 1 root root  5949 Aug 15  2013 05_debian_theme
-rwxr-xr-x 1 root root  9921 Sep 23  2013 09_lowlatency
-rwxr-xr-x 1 root root 11479 Oct 10 17:48 10_linux
-rwxr-xr-x 1 root root 10258 Oct 10 17:48 20_linux_xen
-rwxr-xr-x 1 root root  1798 Jun 17  2013 20_memtest86+
-rwxr-xr-x 1 root root   789 Apr  7 17:44 25_custom
-rwxr-xr-x 1 root root 11531 Oct 10 17:48 30_os-prober
-rwxr-xr-x 1 root root  1426 Oct 10 17:48 30_uefi-firmware
-rwxr-xr-x 1 root root   214 Oct 10 17:48 40_custom
-rwxr-xr-x 1 root root   216 Oct 10 17:48 41_custom
-rw-r--r-- 1 root root   483 Oct 10 17:48 README




=================== sda11/etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"



/boot/efi detected in the fstab of sda11: UUID=0052-39AA	 (sda1)
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
SecureBoot disabled. (maybe sec-boot, Please report this message to boot.repair@gmail.com)


=================== PARTITIONS & DISKS:
sda1	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	is-correct-EFI,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	/mnt/boot-sav/sda1.
sda2	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	recovery-or-hidden,	bootmgr,	is-winboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	/mnt/boot-sav/sda2.
sda4	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	is-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	haswinload,	no-recov-nor-hid,	bootmgr,	is-winboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	/mnt/boot-sav/sda4.
sda5	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	recovery-or-hidden,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	/mnt/boot-sav/sda5.
sda6	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	/mnt/boot-sav/sda6.
sda7	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	/mnt/boot-sav/sda7.
sda8	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	/mnt/boot-sav/sda8.
sda9	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	recovery-or-hidden,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	/mnt/boot-sav/sda9.
sda11	: sda,	not-sepboot,	grubenv-ok	grub2,	signed grub-efi ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-has-goodEFI,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	/mnt/boot-sav/sda11.

sda	: GPT,	no-BIOS_boot,	has-correctEFI, 	not-usb,	has-os,	2048 sectors * 512 bytes


=================== parted -l:

Model: ATA HGST HTS541010A9 (scsi)
Disk /dev/sda: 1000GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt

Number  Start   End     Size    File system     Name  Flags
1      1049kB  316MB   315MB   fat32           EFI   boot
2      316MB   1259MB  944MB   ntfs            Basi  hidden
3      1259MB  1394MB  134MB                   Micr  msftres
4      1394MB  212GB   211GB   ntfs            Basi  msftdata
10      212GB   221GB   9000MB  linux-swap(v1)
11      221GB   275GB   53.9GB  ext4
5      275GB   276GB   367MB   ntfs                  hidden
6      276GB   401GB   126GB   ntfs            Basi  msftdata
7      401GB   727GB   326GB   ntfs            Basi  msftdata
8      727GB   979GB   252GB   ntfs                  msftdata
9      979GB   1000GB  21.5GB  ntfs            Basi  hidden


Model: Lexar USB Flash Drive (scsi)
Disk /dev/sdb: 4010MB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End     Size    Type     File system  Flags
1      24.6kB  4010MB  4010MB  primary  fat32        boot

=================== parted -lm:

BYT;
/dev/sda:1000GB:scsi:512:4096:gpt:ATA HGST HTS541010A9;
1:1049kB:316MB:315MB:fat32:EFI :boot;
2:316MB:1259MB:944MB:ntfs:Basi:hidden;
3:1259MB:1394MB:134MB::Micr:msftres;
4:1394MB:212GB:211GB:ntfs:Basi:msftdata;
10:212GB:221GB:9000MB:linux-swap(v1)::;
11:221GB:275GB:53.9GB:ext4::;
5:275GB:276GB:367MB:ntfs::hidden;
6:276GB:401GB:126GB:ntfs:Basi:msftdata;
7:401GB:727GB:326GB:ntfs:Basi:msftdata;
8:727GB:979GB:252GB:ntfs::msftdata;
9:979GB:1000GB:21.5GB:ntfs:Basi:hidden;

BYT;
/dev/sdb:4010MB:scsi:512:512:msdos:Lexar USB Flash Drive;
1:24.6kB:4010MB:4010MB:fat32::boot;


=================== mount:
/cow on / type overlayfs (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sdb1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /sys/firmware/efi/efivars type efivarfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=ubuntu-studio)
/dev/sda1 on /mnt/boot-sav/sda1 type vfat (rw)
/dev/sda2 on /mnt/boot-sav/sda2 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda4 on /mnt/boot-sav/sda4 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda5 on /mnt/boot-sav/sda5 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda6 on /mnt/boot-sav/sda6 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda7 on /mnt/boot-sav/sda7 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda8 on /mnt/boot-sav/sda8 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda9 on /mnt/boot-sav/sda9 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda11 on /mnt/boot-sav/sda11 type ext4 (rw)


=================== ls:
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda10 sda11 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered):  adsp alarm ashmem autofs binder block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency cuse disk dri dsp ecryptfs fb0 fd full fuse hidraw0 hidraw1 hidraw2 hpet input kmsg kvm log mapper mcelog mei mem mixer net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda10 sda11 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sdb sdb1 sg0 sg1 sg2 shm snapshot snd sr0 stderr stdin stdout sw_sync uinput urandom usb v4l vga_arbiter vhost-net video0 zero
ls /dev/mapper:  control
ls /mnt/boot-sav/sda1/1:

=================== hexdump -n512 -C /dev/sda1
00000000  eb 58 90 4d 53 44 4f 53  35 2e 30 00 02 08 5e 1b  |.X.MSDOS5.0...^.|
00000010  02 00 00 00 00 f8 00 00  3f 00 ff 00 00 08 00 00  |........?.......|
00000020  00 60 09 00 51 02 00 00  00 00 00 00 02 00 00 00  |.`..Q...........|
00000030  01 00 06 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000040  80 01 29 aa 39 52 00 4e  4f 20 4e 41 4d 45 20 20  |..).9R.NO NAME  |
00000050  20 20 46 41 54 33 32 20  20 20 33 c9 8e d1 bc f4  |  FAT32   3.....|
00000060  7b 8e c1 8e d9 bd 00 7c  88 56 40 88 4e 02 8a 56  |{......|.V@.N..V|
00000070  40 b4 41 bb aa 55 cd 13  72 10 81 fb 55 aa 75 0a  |@.A..U..r...U.u.|
00000080  f6 c1 01 74 05 fe 46 02  eb 2d 8a 56 40 b4 08 cd  |...t..F..-.V@...|
00000090  13 73 05 b9 ff ff 8a f1  66 0f b6 c6 40 66 0f b6  |.s......f...@f..|
000000a0  d1 80 e2 3f f7 e2 86 cd  c0 ed 06 41 66 0f b7 c9  |...?.......Af...|
000000b0  66 f7 e1 66 89 46 f8 83  7e 16 00 75 39 83 7e 2a  |f..f.F..~..u9.~*|
000000c0  00 77 33 66 8b 46 1c 66  83 c0 0c bb 00 80 b9 01  |.w3f.F.f........|
000000d0  00 e8 2c 00 e9 a8 03 a1  f8 7d 80 c4 7c 8b f0 ac  |..,......}..|...|
000000e0  84 c0 74 17 3c ff 74 09  b4 0e bb 07 00 cd 10 eb  |..t.<.t.........|
000000f0  ee a1 fa 7d eb e4 a1 7d  80 eb df 98 cd 16 cd 19  |...}...}........|
00000100  66 60 80 7e 02 00 0f 84  20 00 66 6a 00 66 50 06  |f`.~.... .fj.fP.|
00000110  53 66 68 10 00 01 00 b4  42 8a 56 40 8b f4 cd 13  |Sfh.....B.V@....|
00000120  66 58 66 58 66 58 66 58  eb 33 66 3b 46 f8 72 03  |fXfXfXfX.3f;F.r.|
00000130  f9 eb 2a 66 33 d2 66 0f  b7 4e 18 66 f7 f1 fe c2  |..*f3.f..N.f....|
00000140  8a ca 66 8b d0 66 c1 ea  10 f7 76 1a 86 d6 8a 56  |..f..f....v....V|
00000150  40 8a e8 c0 e4 06 0a cc  b8 01 02 cd 13 66 61 0f  |@............fa.|
00000160  82 74 ff 81 c3 00 02 66  40 49 75 94 c3 42 4f 4f  |.t.....f@Iu..BOO|
00000170  54 4d 47 52 20 20 20 20  00 00 00 00 00 00 00 00  |TMGR    ........|
00000180  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001a0  00 00 00 00 00 00 00 00  00 00 00 00 0d 0a 44 69  |..............Di|
000001b0  73 6b 20 65 72 72 6f 72  ff 0d 0a 50 72 65 73 73  |sk error...Press|
000001c0  20 61 6e 79 20 6b 65 79  20 74 6f 20 72 65 73 74  | any key to rest|
000001d0  61 72 74 0d 0a 00 00 00  00 00 00 00 00 00 00 00  |art.............|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 00 00  ac 01 b9 01 00 00 55 aa  |..............U.|
00000200
ls /mnt/boot-sav/sda2/1:
ls /mnt/boot-sav/sda2: AsFac.log
AsPartition.ini
AsTCDProc_20130712232324.log
AsTCDProc_20130713002343.log
AsToolCDVer.txt
AsTool.state
Boot
bootmgr
bootmgr.efi
DetectResult.ini
EFI
en-us
FAC1_dism.log
FAC3_dism.log
FACLog
PASS.txt
Recovery
Sources
SWPackage.ini
System Volume Information  . Please report this message to boot.repair@gmail.com

=================== hexdump -n512 -C /dev/sda2
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 68 09 00  |........?....h..|
00000020  00 00 00 00 80 00 80 00  ff 1f 1c 00 00 00 00 00  |................|
00000030  ff 2b 01 00 00 00 00 00  ff c1 01 00 00 00 00 00  |.+..............|
00000040  f6 00 00 00 01 00 00 00  45 af cd 5a f2 cd 5a 36  |........E..Z..Z6|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 dd 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  4b 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |K.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 52 11 16  68 09 00 66 53 66 53 66  |h...hR..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a 33 c0 bf  |U...h..fa....3..|
00000110  0a 13 b9 f6 0c fc f3 aa  e9 fe 01 90 90 66 60 1e  |.............f`.|
00000120  06 66 a1 11 00 66 03 06  1c 00 1e 66 68 00 00 00  |.f...f.....fh...|
00000130  00 66 50 06 53 68 01 00  68 10 00 b4 42 8a 16 0e  |.fP.Sh..h...B...|
00000140  00 16 1f 8b f4 cd 13 66  59 5b 5a 66 59 66 59 1f  |.......fY[ZfYfY.|
00000150  0f 82 16 00 66 ff 06 11  00 03 16 0f 00 8e c2 ff  |....f...........|
00000160  0e 16 00 75 bc 07 1f 66  61 c3 a1 f6 01 e8 09 00  |...u...fa.......|
00000170  a1 fa 01 e8 03 00 f4 eb  fd 8b f0 ac 3c 00 74 09  |............<.t.|
00000180  b4 0e bb 07 00 cd 10 eb  f2 c3 0d 0a 41 20 64 69  |............A di|
00000190  73 6b 20 72 65 61 64 20  65 72 72 6f 72 20 6f 63  |sk read error oc|
000001a0  63 75 72 72 65 64 00 0d  0a 42 4f 4f 54 4d 47 52  |curred...BOOTMGR|
000001b0  20 69 73 20 63 6f 6d 70  72 65 73 73 65 64 00 0d  | is compressed..|
000001c0  0a 50 72 65 73 73 20 43  74 72 6c 2b 41 6c 74 2b  |.Press Ctrl+Alt+|
000001d0  44 65 6c 20 74 6f 20 72  65 73 74 61 72 74 0d 0a  |Del to restart..|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 8a 01  a7 01 bf 01 00 00 55 aa  |..............U.|
00000200

=================== hexdump -n512 -C /dev/sda4
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 88 29 00  |........?.....).|
00000020  00 00 00 00 80 00 80 00  ff 67 8f 18 00 00 00 00  |.........g......|
00000030  00 00 0c 00 00 00 00 00  7f 35 e9 02 00 00 00 00  |.........5......|
00000040  f6 00 00 00 01 00 00 00  51 ff d1 48 38 d2 48 ae  |........Q..H8.H.|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 dd 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  4b 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |K.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 52 11 16  68 09 00 66 53 66 53 66  |h...hR..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a 33 c0 bf  |U...h..fa....3..|
00000110  0a 13 b9 f6 0c fc f3 aa  e9 fe 01 90 90 66 60 1e  |.............f`.|
00000120  06 66 a1 11 00 66 03 06  1c 00 1e 66 68 00 00 00  |.f...f.....fh...|
00000130  00 66 50 06 53 68 01 00  68 10 00 b4 42 8a 16 0e  |.fP.Sh..h...B...|
00000140  00 16 1f 8b f4 cd 13 66  59 5b 5a 66 59 66 59 1f  |.......fY[ZfYfY.|
00000150  0f 82 16 00 66 ff 06 11  00 03 16 0f 00 8e c2 ff  |....f...........|
00000160  0e 16 00 75 bc 07 1f 66  61 c3 a1 f6 01 e8 09 00  |...u...fa.......|
00000170  a1 fa 01 e8 03 00 f4 eb  fd 8b f0 ac 3c 00 74 09  |............<.t.|
00000180  b4 0e bb 07 00 cd 10 eb  f2 c3 0d 0a 41 20 64 69  |............A di|
00000190  73 6b 20 72 65 61 64 20  65 72 72 6f 72 20 6f 63  |sk read error oc|
000001a0  63 75 72 72 65 64 00 0d  0a 42 4f 4f 54 4d 47 52  |curred...BOOTMGR|
000001b0  20 69 73 20 63 6f 6d 70  72 65 73 73 65 64 00 0d  | is compressed..|
000001c0  0a 50 72 65 73 73 20 43  74 72 6c 2b 41 6c 74 2b  |.Press Ctrl+Alt+|
000001d0  44 65 6c 20 74 6f 20 72  65 73 74 61 72 74 0d 0a  |Del to restart..|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 8a 01  a7 01 bf 01 00 00 55 aa  |..............U.|
00000200

=================== hexdump -n512 -C /dev/sda5
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 f0 0b 20  |........?...... |
00000020  00 00 00 00 80 00 80 00  ff ef 0a 00 00 00 00 00  |................|
00000030  aa 74 00 00 00 00 00 00  02 00 00 00 00 00 00 00  |.t..............|
00000040  f6 00 00 00 01 00 00 00  61 8e 2d 46 c4 2d 46 ae  |........a.-F.-F.|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 dd 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  4b 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |K.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 52 11 16  68 09 00 66 53 66 53 66  |h...hR..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a 33 c0 bf  |U...h..fa....3..|
00000110  0a 13 b9 f6 0c fc f3 aa  e9 fe 01 90 90 66 60 1e  |.............f`.|
00000120  06 66 a1 11 00 66 03 06  1c 00 1e 66 68 00 00 00  |.f...f.....fh...|
00000130  00 66 50 06 53 68 01 00  68 10 00 b4 42 8a 16 0e  |.fP.Sh..h...B...|
00000140  00 16 1f 8b f4 cd 13 66  59 5b 5a 66 59 66 59 1f  |.......fY[ZfYfY.|
00000150  0f 82 16 00 66 ff 06 11  00 03 16 0f 00 8e c2 ff  |....f...........|
00000160  0e 16 00 75 bc 07 1f 66  61 c3 a1 f6 01 e8 09 00  |...u...fa.......|
00000170  a1 fa 01 e8 03 00 f4 eb  fd 8b f0 ac 3c 00 74 09  |............<.t.|
00000180  b4 0e bb 07 00 cd 10 eb  f2 c3 0d 0a 45 72 72 65  |............Erre|
00000190  75 72 20 6c 65 63 74 75  72 65 20 64 69 73 71 75  |ur lecture disqu|
000001a0  65 00 0d 0a 42 4f 4f 54  4d 47 52 20 63 6f 6d 70  |e...BOOTMGR comp|
000001b0  72 65 73 73 82 00 0d 0a  43 74 72 6c 2b 41 6c 74  |ress....Ctrl+Alt|
000001c0  2b 53 75 70 70 72 20 70  6f 75 72 20 72 65 64 82  |+Suppr pour red.|
000001d0  6d 61 72 72 65 72 0d 0a  00 73 74 61 72 74 0d 0a  |marrer...start..|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 8a 01  a2 01 b6 01 00 00 55 aa  |..............U.|
00000200

=================== hexdump -n512 -C /dev/sda6
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 e0 16 20  |........?...... |
00000020  00 00 00 00 80 00 80 00  ff f7 a5 0e 00 00 00 00  |................|
00000030  00 00 0c 00 00 00 00 00  02 00 00 00 00 00 00 00  |................|
00000040  f6 00 00 00 01 00 00 00  41 49 e7 6e 85 e7 6e ea  |........AI.n..n.|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 dd 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  4b 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |K.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 52 11 16  68 09 00 66 53 66 53 66  |h...hR..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a 33 c0 bf  |U...h..fa....3..|
00000110  0a 13 b9 f6 0c fc f3 aa  e9 fe 01 90 90 66 60 1e  |.............f`.|
00000120  06 66 a1 11 00 66 03 06  1c 00 1e 66 68 00 00 00  |.f...f.....fh...|
00000130  00 66 50 06 53 68 01 00  68 10 00 b4 42 8a 16 0e  |.fP.Sh..h...B...|
00000140  00 16 1f 8b f4 cd 13 66  59 5b 5a 66 59 66 59 1f  |.......fY[ZfYfY.|
00000150  0f 82 16 00 66 ff 06 11  00 03 16 0f 00 8e c2 ff  |....f...........|
00000160  0e 16 00 75 bc 07 1f 66  61 c3 a1 f6 01 e8 09 00  |...u...fa.......|
00000170  a1 fa 01 e8 03 00 f4 eb  fd 8b f0 ac 3c 00 74 09  |............<.t.|
00000180  b4 0e bb 07 00 cd 10 eb  f2 c3 0d 0a 45 72 72 65  |............Erre|
00000190  75 72 20 6c 65 63 74 75  72 65 20 64 69 73 71 75  |ur lecture disqu|
000001a0  65 00 0d 0a 42 4f 4f 54  4d 47 52 20 63 6f 6d 70  |e...BOOTMGR comp|
000001b0  72 65 73 73 82 00 0d 0a  43 74 72 6c 2b 41 6c 74  |ress....Ctrl+Alt|
000001c0  2b 53 75 70 70 72 20 70  6f 75 72 20 72 65 64 82  |+Suppr pour red.|
000001d0  6d 61 72 72 65 72 0d 0a  00 73 74 61 72 74 0d 0a  |marrer...start..|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 8a 01  a2 01 b6 01 00 00 55 aa  |..............U.|
00000200

=================== hexdump -n512 -C /dev/sda7
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 e0 bc 2e  |........?.......|
00000020  00 00 00 00 80 00 80 00  ff 37 e7 25 00 00 00 00  |.........7.%....|
00000030  00 00 0c 00 00 00 00 00  02 00 00 00 00 00 00 00  |................|
00000040  f6 00 00 00 01 00 00 00  b4 00 36 1c 27 36 1c 98  |..........6.'6..|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 dd 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  4b 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |K.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 52 11 16  68 09 00 66 53 66 53 66  |h...hR..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a 33 c0 bf  |U...h..fa....3..|
00000110  0a 13 b9 f6 0c fc f3 aa  e9 fe 01 90 90 66 60 1e  |.............f`.|
00000120  06 66 a1 11 00 66 03 06  1c 00 1e 66 68 00 00 00  |.f...f.....fh...|
00000130  00 66 50 06 53 68 01 00  68 10 00 b4 42 8a 16 0e  |.fP.Sh..h...B...|
00000140  00 16 1f 8b f4 cd 13 66  59 5b 5a 66 59 66 59 1f  |.......fY[ZfYfY.|
00000150  0f 82 16 00 66 ff 06 11  00 03 16 0f 00 8e c2 ff  |....f...........|
00000160  0e 16 00 75 bc 07 1f 66  61 c3 a1 f6 01 e8 09 00  |...u...fa.......|
00000170  a1 fa 01 e8 03 00 f4 eb  fd 8b f0 ac 3c 00 74 09  |............<.t.|
00000180  b4 0e bb 07 00 cd 10 eb  f2 c3 0d 0a 41 20 64 69  |............A di|
00000190  73 6b 20 72 65 61 64 20  65 72 72 6f 72 20 6f 63  |sk read error oc|
000001a0  63 75 72 72 65 64 00 0d  0a 42 4f 4f 54 4d 47 52  |curred...BOOTMGR|
000001b0  20 69 73 20 63 6f 6d 70  72 65 73 73 65 64 00 0d  | is compressed..|
000001c0  0a 50 72 65 73 73 20 43  74 72 6c 2b 41 6c 74 2b  |.Press Ctrl+Alt+|
000001d0  44 65 6c 20 74 6f 20 72  65 73 74 61 72 74 0d 0a  |Del to restart..|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 8a 01  a7 01 bf 01 00 00 55 aa  |..............U.|
00000200

=================== hexdump -n512 -C /dev/sda8
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 00 00 00  |........?.......|
00000020  00 00 00 00 80 00 80 00  ff f7 4b 1d 00 00 00 00  |..........K.....|
00000030  00 00 0c 00 00 00 00 00  02 00 00 00 00 00 00 00  |................|
00000040  f6 00 00 00 01 00 00 00  29 eb 48 ce 35 49 ce 3a  |........).H.5I.:|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 dd 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  4b 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |K.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 52 11 16  68 09 00 66 53 66 53 66  |h...hR..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a 33 c0 bf  |U...h..fa....3..|
00000110  0a 13 b9 f6 0c fc f3 aa  e9 fe 01 90 90 66 60 1e  |.............f`.|
00000120  06 66 a1 11 00 66 03 06  1c 00 1e 66 68 00 00 00  |.f...f.....fh...|
00000130  00 66 50 06 53 68 01 00  68 10 00 b4 42 8a 16 0e  |.fP.Sh..h...B...|
00000140  00 16 1f 8b f4 cd 13 66  59 5b 5a 66 59 66 59 1f  |.......fY[ZfYfY.|
00000150  0f 82 16 00 66 ff 06 11  00 03 16 0f 00 8e c2 ff  |....f...........|
00000160  0e 16 00 75 bc 07 1f 66  61 c3 a1 f6 01 e8 09 00  |...u...fa.......|
00000170  a1 fa 01 e8 03 00 f4 eb  fd 8b f0 ac 3c 00 74 09  |............<.t.|
00000180  b4 0e bb 07 00 cd 10 eb  f2 c3 0d 0a 45 72 72 65  |............Erre|
00000190  75 72 20 6c 65 63 74 75  72 65 20 64 69 73 71 75  |ur lecture disqu|
000001a0  65 00 0d 0a 42 4f 4f 54  4d 47 52 20 63 6f 6d 70  |e...BOOTMGR comp|
000001b0  72 65 73 73 82 00 0d 0a  43 74 72 6c 2b 41 6c 74  |ress....Ctrl+Alt|
000001c0  2b 53 75 70 70 72 20 70  6f 75 72 20 72 65 64 82  |+Suppr pour red.|
000001d0  6d 61 72 72 65 72 0d 0a  00 73 74 61 72 74 0d 0a  |marrer...start..|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 8a 01  a2 01 b6 01 00 00 55 aa  |..............U.|
00000200

=================== hexdump -n512 -C /dev/sda9
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 18 f0 71  |........?......q|
00000020  00 00 00 00 80 00 80 00  ff 4f 80 02 00 00 00 00  |.........O......|
00000030  00 00 0c 00 00 00 00 00  ff 04 28 00 00 00 00 00  |..........(.....|
00000040  f6 00 00 00 01 00 00 00  ce d4 d7 ee e9 d7 ee 00  |................|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 dd 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  4b 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |K.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 52 11 16  68 09 00 66 53 66 53 66  |h...hR..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a 33 c0 bf  |U...h..fa....3..|
00000110  0a 13 b9 f6 0c fc f3 aa  e9 fe 01 90 90 66 60 1e  |.............f`.|
00000120  06 66 a1 11 00 66 03 06  1c 00 1e 66 68 00 00 00  |.f...f.....fh...|
00000130  00 66 50 06 53 68 01 00  68 10 00 b4 42 8a 16 0e  |.fP.Sh..h...B...|
00000140  00 16 1f 8b f4 cd 13 66  59 5b 5a 66 59 66 59 1f  |.......fY[ZfYfY.|
00000150  0f 82 16 00 66 ff 06 11  00 03 16 0f 00 8e c2 ff  |....f...........|
00000160  0e 16 00 75 bc 07 1f 66  61 c3 a1 f6 01 e8 09 00  |...u...fa.......|
00000170  a1 fa 01 e8 03 00 f4 eb  fd 8b f0 ac 3c 00 74 09  |............<.t.|
00000180  b4 0e bb 07 00 cd 10 eb  f2 c3 0d 0a 41 20 64 69  |............A di|
00000190  73 6b 20 72 65 61 64 20  65 72 72 6f 72 20 6f 63  |sk read error oc|
000001a0  63 75 72 72 65 64 00 0d  0a 42 4f 4f 54 4d 47 52  |curred...BOOTMGR|
000001b0  20 69 73 20 63 6f 6d 70  72 65 73 73 65 64 00 0d  | is compressed..|
000001c0  0a 50 72 65 73 73 20 43  74 72 6c 2b 41 6c 74 2b  |.Press Ctrl+Alt+|
000001d0  44 65 6c 20 74 6f 20 72  65 73 74 61 72 74 0d 0a  |Del to restart..|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 8a 01  a7 01 bf 01 00 00 55 aa  |..............U.|
00000200

WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.


=================== df -Th:

Filesystem     Type       Size  Used Avail Use% Mounted on
/cow           overlayfs  3.9G  207M  3.7G   6% /
udev           devtmpfs   3.9G   12K  3.9G   1% /dev
tmpfs          tmpfs      788M  1.3M  786M   1% /run
/dev/sdb1      vfat       3.8G  3.1G  720M  82% /cdrom
/dev/loop0     squashfs   1.9G  1.9G     0 100% /rofs
none           tmpfs      4.0K     0  4.0K   0% /sys/fs/cgroup
tmpfs          tmpfs      3.9G   12K  3.9G   1% /tmp
none           tmpfs      5.0M     0  5.0M   0% /run/lock
none           tmpfs      3.9G   76K  3.9G   1% /run/shm
none           tmpfs      100M   24K  100M   1% /run/user
/dev/sda1      vfat       296M   40M  257M  14% /mnt/boot-sav/sda1
/dev/sda2      fuseblk    900M  363M  538M  41% /mnt/boot-sav/sda2
/dev/sda4      fuseblk    197G  126G   72G  64% /mnt/boot-sav/sda4
/dev/sda5      fuseblk    350M  292M   59M  84% /mnt/boot-sav/sda5
/dev/sda6      fuseblk    118G  260M  117G   1% /mnt/boot-sav/sda6
/dev/sda7      fuseblk    304G   94G  210G  31% /mnt/boot-sav/sda7
/dev/sda8      fuseblk    235G  143G   93G  61% /mnt/boot-sav/sda8
/dev/sda9      fuseblk     21G   15G  5.5G  73% /mnt/boot-sav/sda9
/dev/sda11     ext4        50G  6.0G   41G  13% /mnt/boot-sav/sda11

=================== fdisk -l:

Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x2adc1b83

Device Boot      Start         End      Blocks   Id  System
/dev/sda1               1  1953525167   976762583+  ee  GPT
Partition 1 does not start on physical sector boundary.

Disk /dev/sdb: 4009 MB, 4009754624 bytes
145 heads, 48 sectors/track, 1125 cylinders, total 7831552 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xc3072e18

Device Boot      Start         End      Blocks   Id  System
/dev/sdb1   *          48     7831551     3915752    b  W95 FAT32


EFI detected. Please check the options.

=================== Recommended repair
Recommended-Repair
This setting will reinstall the grub-efi-amd64-signed of sda11, using the following options:        sda1/boot/efi,
Additional repair will be performed: unhide-bootmenu-10s


df: ‘/dev/sda1@/efi/Microsoft/Boot/bootmgfw.efi’: No such file or directory
Could not detect USEDPERCENT of sda1@/efi/Microsoft/Boot/bootmgfw.efi ().
df: ‘/dev/sda1@/efi/Microsoft/Boot/bootmgfw.efi’: No such file or directory

Mount sda1 on /mnt/boot-sav/sda11/boot/efi
ls /mnt/boot-sav/sda11/boot/efi/1:

*******lspci -nnk | grep -iA3 vga
00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09)
Subsystem: ASUSTeK Computer Inc. Device [1043:1477]
Kernel driver in use: i915
00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04)
*******

grub-install (GRUB) 2.00-19ubuntu2.1,grub-install (GRUB) 2.

chroot /mnt/boot-sav/sda11 efibootmgr -v
BootCurrent: 0003
Timeout: 2 seconds
BootOrder: 0003,0000,0002
Boot0000* ubuntustudio	HD(1,800,96000,75f1eda7-17aa-485d-9b76-45b126e4592f)File(EFIubuntustudioshimx64.efi)
Boot0002* Windows Boot Manager	HD(1,800,96000,75f1eda7-17aa-485d-9b76-45b126e4592f)File(EFIMicrosoftBootbootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}...o................
Boot0003* UEFI: Lexar USB Flash Drive 1100	ACPI(a0341d0,0)PCI(1d,0)USB(1,0)USB(4,0)HD(1,30,777fd0,c3072e18)AMBO

chroot /mnt/boot-sav/sda11 uname -r
Kernel: 3.11.0-11-lowlatency
WinEFI detected. Do you want to activate [Backup and rename Windows EFI files]? yes (if any choice fails, please retry with the other)

Reinstall the grub-efi-amd64-signed of sda11
Installation finished. No error reported.
grub-install --efi-directory=/boot/efi --target=x86_64-efi --uefi-secure-boot : BootCurrent: 0003
Timeout: 2 seconds
BootOrder: 0003,0002
Boot0002* Windows Boot Manager
Boot0003* UEFI: Lexar USB Flash Drive 1100
BootCurrent: 0003
Timeout: 2 seconds
BootOrder: 0000,0003,0002
Boot0002* Windows Boot Manager
Boot0003* UEFI: Lexar USB Flash Drive 1100
Boot0000* ubuntustudio
exit code of grub-install :0
mv 25_custom
ls /mnt/boot-sav/sda11/boot/efi/1:
df /dev/sda1
df /dev/sda1
df /dev/sda1
ls /mnt/boot-sav/sda11/boot/efi/1:
Add /mnt/boot-sav/sda11/boot/efi efi entries in /mnt/boot-sav/sda11/etc/grub.d/25_custom
Adding custom /mnt/boot-sav/sda11/boot/efi/EFI/Microsoft/Boot/bkpbootmgfw.efi
Adding custom /mnt/boot-sav/sda11/boot/efi/EFI/Boot/bkpbootx64.efi
sda1/bkpbootx64.efi already added
sda1/bkpbootmgfw.efi already added
Adding custom /mnt/boot-sav/sda11/boot/efi/EFI/ubuntustudio/MokManager.efi
df /dev/sda2
df /dev/sda2
df /dev/sda2
ls /mnt/boot-sav/sda2/1:
ls /mnt/boot-sav/sda2: AsFac.log
AsPartition.ini
AsTCDProc_20130712232324.log
AsTCDProc_20130713002343.log
AsToolCDVer.txt
AsTool.state
Boot
bootmgr
bootmgr.efi
DetectResult.ini
EFI
en-us
FAC1_dism.log
FAC3_dism.log
FACLog
PASS.txt
Recovery
Sources
SWPackage.ini
System Volume Information  . Please report this message to boot.repair@gmail.com
Add /mnt/boot-sav/sda2 efi entries in /mnt/boot-sav/sda11/etc/grub.d/25_custom
Adding custom /mnt/boot-sav/sda2/EFI/Microsoft/Boot/bkpbootmgfw.efi
Adding custom /mnt/boot-sav/sda2/EFI/Boot/bkpbootx64.efi
sda2/bkpbootx64.efi already added
sda2/bkpbootmgfw.efi already added

chroot /mnt/boot-sav/sda11 efibootmgr -v
BootCurrent: 0003
Timeout: 2 seconds
BootOrder: 0000,0003,0002
Boot0000* ubuntustudio	HD(1,800,96000,75f1eda7-17aa-485d-9b76-45b126e4592f)File(EFIubuntustudioshimx64.efi)
Boot0002* Windows Boot Manager	HD(1,800,96000,75f1eda7-17aa-485d-9b76-45b126e4592f)File(EFIMicrosoftBootbootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}...o................
Boot0003* UEFI: Lexar USB Flash Drive 1100	ACPI(a0341d0,0)PCI(1d,0)USB(1,0)USB(4,0)HD(1,30,777fd0,c3072e18)AMBO

chroot /mnt/boot-sav/sda11 update-grub
Generating grub.cfg ...
Found linux image: /boot/vmlinuz-3.11.0-11-lowlatency
Found initrd image: /boot/initrd.img-3.11.0-11-lowlatency
Found linux image: /boot/vmlinuz-3.11.0-19-generic
Found initrd image: /boot/initrd.img-3.11.0-19-generic
Found linux image: /boot/vmlinuz-3.11.0-11-lowlatency
Found initrd image: /boot/initrd.img-3.11.0-11-lowlatency
Found Windows Boot Manager on /dev/sda1@/EFI/Microsoft/Boot/bootmgfw.efi
Adding boot menu entry for EFI firmware configuration
Unhide GRUB boot menu in sda11/boot/grub/grub.cfg

Boot successfully repaired.

You can now reboot your computer.


You may want to retry after deactivating the [Backup and rename Windows EFI files] option.

Je crois que l'indice que ton install est pourrie, c'est dans cet extrait :

sda1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  Windows 8/2012: FAT32
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /EFI/Boot/bkpbootx64.efi /EFI/Boot/bootx64.efi 
                       /EFI/ubuntustudio/MokManager.efi 
                       /EFI/ubuntustudio/grubx64.efi 
                       /EFI/ubuntustudio/shimx64.efi 
                       /EFI/Microsoft/Boot/bkpbootmgfw.efi 
                       /EFI/Microsoft/Boot/bootmgfw.efi 
                       /EFI/Microsoft/Boot/bootmgr.efi 
                       /EFI/Microsoft/Boot/bootx64.efi 
                       /EFI/Microsoft/Boot/memtest.efi

On y voit une directorie "ubuntustudio" et je crois que c'est "ubuntu" qu'il conviendrait d'avoir à la place. Je pense que tu es victime de ce bug : https://bugs.launchpad.net/ubuntu/+sour … ug/1242417
Le pb, c'est que moi je ne sais pas comment réparer ça. Peut-être que le plus efficace serait d'installer la version normale de Ubuntu (et pas "Ubuntu studio") mais il y a une chose très importante que je veux te signaler : si tu tentes d'installer une autre version ou de réinstaller la même, prends bien "Autre chose" à l'étape 3 de l'installation comme c'est précisé dans la note :

Pour les ordinateurs préinstallés Windows 8, L'installateur de Ubuntu ne sait pas détecter la présence de Windows 8. Pour un dual-boot, il est donc impératif de sélectionner "Autre chose" pour ne pas risquer l'écrasement de Windows 8 (ne jamais sélectionner "Supprimer Ubuntu XX.XX et réinstaller") 

Dernière modification par malbo (Le 08/04/2014, à 08:25)


MedionPC MT5 MED MT 162 / pentium IV / RAM 1Go / Radeon HD 3450 AGP / XP, HandyLinux et Xubuntu 14.04 32 bits
Acer Aspire M5100-5F7N / Phenom Quad Core 9500 / ATI HD 2600 pro / RAM 4 Go / Win8, XP et Ubuntu 14.04

Hors ligne

#8 Le 08/04/2014, à 09:40

GMTartine

Re : [Résolu] Problème grub2 windows 8.1 et ubuntu studio13.10

Bonjour,
Pour démarrer sous windows 8, tu peux essayer de taper "exit" et valide avec entrée a l'invite

grub>

Umanaüm Baouné Un Noemrisa Talagaïss Ugatsi

Hors ligne

#9 Le 08/04/2014, à 10:04

maxire

Re : [Résolu] Problème grub2 windows 8.1 et ubuntu studio13.10

Bonjour,

Le mieux serait d'installer Ubuntu Studi0 14.04 beta2 disponible à http://ubuntustudio.org/.
Le bug décrit par Malbo semble avoir été résolu en Novembre dernier en ce qui concerne Trusty, (voir dernier message de https://bugs.launchpad.net/ubuntu/+sour … ug/1242417 daté du 13 novembre 2013).

Dernière modification par maxire (Le 08/04/2014, à 10:08)


Maxire
Archlinux/Mate + Ubuntu 10,04 sur portable -- Archlinux/Mate sur poste de travail +  LFS, Trusty/Unity en VM, Windows XP en VM

Hors ligne

#10 Le 08/04/2014, à 11:03

Pierre_mira

Re : [Résolu] Problème grub2 windows 8.1 et ubuntu studio13.10

Merci de toute vos réponses,
Après la lecture de la page https://bugs.launchpad.net/ubuntu/+sour … ug/1242417 j'ai bien l'impression que c'est mon problème.
J'installe Ubuntu Studio 14.04 beta 2 et je tiens au courant !

Hors ligne

#11 Le 09/04/2014, à 19:55

Pierre_mira

Re : [Résolu] Problème grub2 windows 8.1 et ubuntu studio13.10

Bon,
Eh bien j'ai installé ubuntu studio 14.04 beta 2 et ça ne change rien non plus, toujours le minimal bash-like...
Dans la session live maintenant j'essais de lancer boot-repair en suivant ce lien http://doc.ubuntu-fr.org/boot-repair
ça marchait avec l'usb live, mais maintenant que je le fais avec un dvd du 14.04 beta 2 le terminal me dit ça :
" W: You may want to run apt-get update to correct these poroblems
E: Unable to locate package boot-repair"

C'est peut être un problème de mode UEFI, je ne suis pas sur d'avoir compris comment lancer un dvd en mode uefi...
J'ai essayé pas mal de choses mais rien ne bouge...
Si quelqu'un a une idée?

Hors ligne

#12 Le 10/04/2014, à 06:37

malbo

Re : [Résolu] Problème grub2 windows 8.1 et ubuntu studio13.10

Pierre_mira a écrit :

" W: You may want to run apt-get update to correct these poroblems
E: Unable to locate package boot-repair"

C'est parce que le dépôt qui est sensé te fournir le paquet boot-repair n'existe pas encore pour la version 14.04. Le plus simple c'est de faire le Boot-Info en utilisant un support live de Ubuntu 13.10.


MedionPC MT5 MED MT 162 / pentium IV / RAM 1Go / Radeon HD 3450 AGP / XP, HandyLinux et Xubuntu 14.04 32 bits
Acer Aspire M5100-5F7N / Phenom Quad Core 9500 / ATI HD 2600 pro / RAM 4 Go / Win8, XP et Ubuntu 14.04

Hors ligne

#13 Le 10/04/2014, à 11:19

Pierre_mira

Re : [Résolu] Problème grub2 windows 8.1 et ubuntu studio13.10

Oui j'ai relancé boot repair depuis Ubuntu studio 13.10.
Voici mon Boot info : http://paste.ubuntu.com/7229940/
Je m'aperçois qu'il y a pas mal d'écriture en rouge dedans, qu'est ce que ça signifie?

Dernière modification par Pierre_mira (Le 10/04/2014, à 11:21)

Hors ligne

#14 Le 10/04/2014, à 11:26

malbo

Re : [Résolu] Problème grub2 windows 8.1 et ubuntu studio13.10

Ton dernier Boot-Info :

 Boot Info Script e7fc706 + Boot-Repair extra info      [Boot-Info 23Dec2013]


============================= Boot Info Summary: ===============================

 => Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 
    432351232 of the same hard drive for core.img. core.img is at this 
    location and looks in partition 112 for .
 => Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdb.

sda1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  Windows 8/2012: FAT32
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /EFI/Boot/bootx64.efi /EFI/ubuntustudio/MokManager.efi 
                       /EFI/ubuntustudio/grubx64.efi 
                       /EFI/ubuntustudio/shimx64.efi 
                       /EFI/Microsoft/Boot/bootmgfw.efi 
                       /EFI/Microsoft/Boot/bootmgr.efi 
                       /EFI/Microsoft/Boot/memtest.efi

sda2: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /bootmgr /Boot/BCD

sda3: __________________________________________________________________________

    File system:       
    Boot sector type:  -
    Boot sector info: 
    Mounting failed:   mount: unknown filesystem type ''

sda4: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /bootmgr /Boot/BCD /Windows/System32/winload.exe

sda5: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sda6: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sda7: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sda8: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  According to the info in the boot sector, sda8 starts 
                       at sector 0. But according to the info from fdisk, 
                       sda8 starts at sector 1420040192.
    Operating System:  
    Boot files:        

sda9: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sda10: _________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sda11: _________________________________________________________________________

    File system:       BIOS Boot partition
    Boot sector type:  Grub2's core.img
    Boot sector info: 

sda12: _________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu Trusty Tahr (development branch) 
    Boot files:        /boot/grub/grub.cfg /etc/fstab 
                       /boot/grub/i386-pc/core.img

sdb1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  SYSLINUX 4.04 2011-04-18
    Boot sector info:  Syslinux looks at sector 7830832 of /dev/sdb1 for its 
                       second stage. SYSLINUX is installed in the  directory. 
                       No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /boot/grub/grub.cfg /syslinux/syslinux.cfg 
                       /EFI/BOOT/grubx64.efi /ldlinux.sys

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________

Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1                   1 1,953,525,167 1,953,525,167  ee GPT


GUID Partition Table detected.

Partition    Start Sector    End Sector  # of Sectors System
/dev/sda1           2,048       616,447       614,400 EFI System partition
/dev/sda2         616,448     2,459,647     1,843,200 -
/dev/sda3       2,459,648     2,721,791       262,144 Microsoft Reserved Partition (Windows)
/dev/sda4       2,721,792   414,773,247   412,051,456 Data partition (Windows/Linux)
/dev/sda5     537,653,248   538,370,047       716,800 -
/dev/sda6     538,370,048   784,127,999   245,757,952 Data partition (Windows/Linux)
/dev/sda7     784,130,048 1,420,040,191   635,910,144 Data partition (Windows/Linux)
/dev/sda8   1,420,040,192 1,911,558,143   491,517,952 Data partition (Windows/Linux)
/dev/sda9   1,911,560,192 1,953,523,711    41,963,520 -
/dev/sda10    414,773,248   432,351,231    17,577,984 Swap partition (Linux)
/dev/sda11    432,351,232   432,353,279         2,048 BIOS Boot partition
/dev/sda12    432,353,280   537,653,247   105,299,968 Data partition (Linux)

Drive: sdb _____________________________________________________________________

Disk /dev/sdb: 4009 MB, 4009754624 bytes
145 heads, 48 sectors/track, 1125 cylinders, total 7831552 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdb1    *             48     7,831,551     7,831,504   b W95 FAT32


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/loop0                                              squashfs   
/dev/sda1        0052-39AA                              vfat       SYSTEM
/dev/sda10       55470428-14b3-48ea-9e65-177552f8555c   swap       
/dev/sda12       4af81a12-d4a8-457d-a399-ccb82e1c0744   ext4       
/dev/sda2        365ACDF25ACDAF45                       ntfs       Recovery
/dev/sda4        AE48D23848D1FF51                       ntfs       OS
/dev/sda5        AE462DC4462D8E61                       ntfs       
/dev/sda6        EA6EE7856EE74941                       ntfs       Déchets Logiciels
/dev/sda7        981C36271C3600B4                       ntfs       DATA
/dev/sda8        3ACE4935CE48EB29                       ntfs       Multimédia
/dev/sda9        00EED7E9EED7D4CE                       ntfs       Restore
/dev/sdb1        2029-7495                              vfat       MYLINUXLIVE

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/loop0       /rofs                    squashfs   (ro,noatime)
/dev/sdb1        /cdrom                   vfat       (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)


========================== sda12/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_gpt 
insmod ext2
set root='hd0,gpt12'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt12 --hint-efi=hd0,gpt12 --hint-baremetal=ahci0,gpt12  4af81a12-d4a8-457d-a399-ccb82e1c0744
else
  search --no-floppy --fs-uuid --set=root 4af81a12-d4a8-457d-a399-ccb82e1c0744
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=-1
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=menu
    set timeout=10
  # Fallback normal timeout code in case the timeout_style feature is
  # unavailable.
  else
    set timeout=10
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/09_lowlatency ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu (lowlatency)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-4af81a12-d4a8-457d-a399-ccb82e1c0744' {
recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	insmod part_gpt 
	insmod ext2
	set root='hd0,gpt12'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt12 --hint-efi=hd0,gpt12 --hint-baremetal=ahci0,gpt12  4af81a12-d4a8-457d-a399-ccb82e1c0744
	else
	  search --no-floppy --fs-uuid --set=root 4af81a12-d4a8-457d-a399-ccb82e1c0744
	fi
	linux	/boot/vmlinuz-3.13.0-19-lowlatency root=UUID=4af81a12-d4a8-457d-a399-ccb82e1c0744 ro   quiet splash $vt_handoff
	initrd	/boot/initrd.img-3.13.0-19-lowlatency
}

### END /etc/grub.d/09_lowlatency ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-4af81a12-d4a8-457d-a399-ccb82e1c0744' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	insmod part_gpt 
	insmod ext2
	set root='hd0,gpt12'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt12 --hint-efi=hd0,gpt12 --hint-baremetal=ahci0,gpt12  4af81a12-d4a8-457d-a399-ccb82e1c0744
	else
	  search --no-floppy --fs-uuid --set=root 4af81a12-d4a8-457d-a399-ccb82e1c0744
	fi
	linux	/boot/vmlinuz-3.13.0-19-lowlatency root=UUID=4af81a12-d4a8-457d-a399-ccb82e1c0744 ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-3.13.0-19-lowlatency
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-4af81a12-d4a8-457d-a399-ccb82e1c0744' {
	menuentry 'Ubuntu, avec Linux 3.13.0-19-lowlatency' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-19-lowlatency-advanced-4af81a12-d4a8-457d-a399-ccb82e1c0744' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		insmod part_gpt 
		insmod ext2
		set root='hd0,gpt12'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt12 --hint-efi=hd0,gpt12 --hint-baremetal=ahci0,gpt12  4af81a12-d4a8-457d-a399-ccb82e1c0744
		else
		  search --no-floppy --fs-uuid --set=root 4af81a12-d4a8-457d-a399-ccb82e1c0744
		fi
		echo	'Chargement de Linux 3.13.0-19-lowlatency…'
		linux	/boot/vmlinuz-3.13.0-19-lowlatency root=UUID=4af81a12-d4a8-457d-a399-ccb82e1c0744 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.13.0-19-lowlatency
	}
	menuentry 'Ubuntu, with Linux 3.13.0-19-lowlatency (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-19-lowlatency-recovery-4af81a12-d4a8-457d-a399-ccb82e1c0744' {
		recordfail
		load_video
		insmod gzio
		insmod part_gpt 
		insmod ext2
		set root='hd0,gpt12'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt12 --hint-efi=hd0,gpt12 --hint-baremetal=ahci0,gpt12  4af81a12-d4a8-457d-a399-ccb82e1c0744
		else
		  search --no-floppy --fs-uuid --set=root 4af81a12-d4a8-457d-a399-ccb82e1c0744
		fi
		echo	'Chargement de Linux 3.13.0-19-lowlatency…'
		linux	/boot/vmlinuz-3.13.0-19-lowlatency root=UUID=4af81a12-d4a8-457d-a399-ccb82e1c0744 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.13.0-19-lowlatency
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
	insmod part_gpt 
	insmod ext2
	set root='hd0,gpt12'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt12 --hint-efi=hd0,gpt12 --hint-baremetal=ahci0,gpt12  4af81a12-d4a8-457d-a399-ccb82e1c0744
	else
	  search --no-floppy --fs-uuid --set=root 4af81a12-d4a8-457d-a399-ccb82e1c0744
	fi
	knetbsd	/boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
	insmod part_gpt 
	insmod ext2
	set root='hd0,gpt12'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt12 --hint-efi=hd0,gpt12 --hint-baremetal=ahci0,gpt12  4af81a12-d4a8-457d-a399-ccb82e1c0744
	else
	  search --no-floppy --fs-uuid --set=root 4af81a12-d4a8-457d-a399-ccb82e1c0744
	fi
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows Recovery Environment (loader) (sur /dev/sda2)' --class windows --class os $menuentry_id_option 'osprober-chain-365ACDF25ACDAF45' {
	insmod part_gpt 
	insmod ntfs
	set root='hd0,gpt2'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  365ACDF25ACDAF45
	else
	  search --no-floppy --fs-uuid --set=root 365ACDF25ACDAF45
	fi
	drivemap -s (hd0) ${root}
	chainloader +1
}
menuentry 'Windows 8 (loader) (sur /dev/sda4)' --class windows --class os $menuentry_id_option 'osprober-chain-AE48D23848D1FF51' {
	insmod part_gpt 
	insmod ntfs
	set root='hd0,gpt4'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt4 --hint-efi=hd0,gpt4 --hint-baremetal=ahci0,gpt4  AE48D23848D1FF51
	else
	  search --no-floppy --fs-uuid --set=root AE48D23848D1FF51
	fi
	drivemap -s (hd0) ${root}
	chainloader +1
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
  set timeout=10
fi
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda12/etc/fstab: ===============================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda12 during installation
UUID=4af81a12-d4a8-457d-a399-ccb82e1c0744 /               ext4    errors=remount-ro 0       1
# swap was on /dev/sda10 during installation
UUID=55470428-14b3-48ea-9e65-177552f8555c none            swap    sw              0       0
--------------------------------------------------------------------------------

=================== sda12: Location of files loaded by Grub: ===================

           GiB - GB             File                                 Fragment(s)


=========================== sdb1/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------

if loadfont /boot/grub/font.pf2 ; then
	set gfxmode=auto
	insmod efi_gop
	insmod efi_uga
	insmod gfxterm
	terminal_output gfxterm
fi

set menu_color_normal=white/black
set menu_color_highlight=black/light-gray

menuentry "Try Ubuntu Studio without installing" {
	set gfxpayload=keep
	linux	/casper/vmlinuz  file=/cdrom/preseed/ubuntustudio.seed boot=casper quiet splash --
	initrd	/casper/initrd.lz
}
menuentry "Install Ubuntu Studio" {
	set gfxpayload=keep
	linux	/casper/vmlinuz  file=/cdrom/preseed/ubuntustudio.seed boot=casper only-ubiquity quiet splash --
	initrd	/casper/initrd.lz
}
menuentry "OEM install (for manufacturers)" {
	set gfxpayload=keep
	linux	/casper/vmlinuz  file=/cdrom/preseed/ubuntustudio.seed boot=casper only-ubiquity quiet splash oem-config/enable=true --
	initrd	/casper/initrd.lz
}
menuentry "Check disc for defects" {
	set gfxpayload=keep
	linux	/casper/vmlinuz  boot=casper integrity-check quiet splash --
	initrd	/casper/initrd.lz
}
--------------------------------------------------------------------------------

========================= sdb1/syslinux/syslinux.cfg: ==========================

--------------------------------------------------------------------------------
# D-I config version 2.0
include menu.cfg
default vesamenu.c32
prompt 0
timeout 300
ui gfxboot bootlogo
--------------------------------------------------------------------------------

=================== sdb1: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)


================= sdb1: Location of files loaded by Syslinux: ==================

           GiB - GB             File                                 Fragment(s)


============== sdb1: Version of COM32(R) files used by Syslinux: ===============

 syslinux/chain.c32                 :  COM32R module (v4.xx)
 syslinux/gfxboot.c32               :  COM32R module (v4.xx)
 syslinux/vesamenu.c32              :  COM32R module (v4.xx)

======================== Unknown MBRs/Boot Sectors/etc: ========================

Unknown GPT Partiton Type
a4bb94ded106404da1a6bfd50179d6ac
Unknown GPT Partiton Type
a4bb94ded106404da1a6bfd50179d6ac
Unknown GPT Partiton Type
a4bb94ded106404da1a6bfd50179d6ac

=============================== StdErr Messages: ===============================

cat: /tmp/BootInfo-UA6aa9kV/Tmp_Log: No such file or directory
cat: /tmp/BootInfo-UA6aa9kV/Tmp_Log: No such file or directory
cat: /tmp/BootInfo-UA6aa9kV/Tmp_Log: No such file or directory
File descriptor 9 (/proc/4261/mounts) leaked on lvscan invocation. Parent PID 17640: bash
  No volume groups found

ADDITIONAL INFORMATION :
=================== log of boot-repair 2014-04-10__08h58 ===================
boot-repair version : 3.199~ppa40~saucy
boot-sav version : 3.199~ppa40~saucy
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 3.199~ppa40~saucy
boot-repair is executed in live-session (Ubuntu 13.10, saucy, Ubuntu, x86_64)
ls: cannot access /home/usr/.config: No such file or directory
CPU op-mode(s):        32-bit, 64-bit
BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntustudio.seed boot=casper quiet splash --

WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.


=================== os-prober:
/dev/sda1@/efi/Microsoft/Boot/bootmgfw.efi:Windows Boot Manager:Windows:efi
/dev/sda12:Ubuntu Trusty Tahr (development branch) (14.04):Ubuntu:linux

=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/sda1: LABEL="SYSTEM" UUID="0052-39AA" TYPE="vfat"
/dev/sda2: LABEL="Recovery" UUID="365ACDF25ACDAF45" TYPE="ntfs"
/dev/sda4: LABEL="OS" UUID="AE48D23848D1FF51" TYPE="ntfs"
/dev/sda5: UUID="AE462DC4462D8E61" TYPE="ntfs"
/dev/sda6: LABEL="DM-CM-)chets Logiciels" UUID="EA6EE7856EE74941" TYPE="ntfs"
/dev/sda7: LABEL="DATA" UUID="981C36271C3600B4" TYPE="ntfs"
/dev/sda8: LABEL="MultimM-CM-)dia" UUID="3ACE4935CE48EB29" TYPE="ntfs"
/dev/sda9: LABEL="Restore" UUID="00EED7E9EED7D4CE" TYPE="ntfs"
/dev/sda10: UUID="55470428-14b3-48ea-9e65-177552f8555c" TYPE="swap"
/dev/sda12: UUID="4af81a12-d4a8-457d-a399-ccb82e1c0744" TYPE="ext4"
/dev/sdb1: LABEL="MYLINUXLIVE" UUID="2029-7495" TYPE="vfat"


1 disks with OS, 2 OS : 1 Linux, 0 MacOS, 1 Windows, 0 unknown type OS.

Windows not detected by os-prober on sda4.

WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util sfdisk doesn't support GPT. Use GNU Parted.


WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.

Presence of EFI/Microsoft file detected: /mnt/boot-sav/sda1/EFI/Microsoft/Boot/bootmgfw.efi
Presence of EFI/Boot file detected: /mnt/boot-sav/sda1/EFI/Boot/bootx64.efi
Presence of EFI/Microsoft file detected: /mnt/boot-sav/sda2/EFI/Microsoft/Boot/bootmgfw.efi
Presence of EFI/Boot file detected: /mnt/boot-sav/sda2/EFI/Boot/bootx64.efi

=================== sda12/etc/grub.d/ :
drwxr-xr-x  2 root root         4096 Mar 26 19:37 grub.d
total 88
-rwxr-xr-x 1 root root  9424 Mar 11 10:49 00_header
-rwxr-xr-x 1 root root  5949 Mar 10 13:37 05_debian_theme
-rwxr-xr-x 1 root root  9921 Feb 12 11:50 09_lowlatency
-rwxr-xr-x 1 root root 11608 Mar 11 10:49 10_linux
-rwxr-xr-x 1 root root 10412 Mar 11 10:49 20_linux_xen
-rwxr-xr-x 1 root root  1992 Mar 12 12:31 20_memtest86+
-rwxr-xr-x 1 root root 11641 Mar 11 10:49 30_os-prober
-rwxr-xr-x 1 root root  1416 Mar 11 10:49 30_uefi-firmware
-rwxr-xr-x 1 root root   214 Mar 11 10:49 40_custom
-rwxr-xr-x 1 root root   216 Mar 11 10:49 41_custom
-rw-r--r-- 1 root root   483 Mar 11 10:49 README




=================== sda12/etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"



=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
SecureBoot disabled. (maybe sec-boot, Please report this message to boot.repair@gmail.com)


=================== PARTITIONS & DISKS:
sda1	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	is-correct-EFI,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	/mnt/boot-sav/sda1.
sda2	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	recovery-or-hidden,	bootmgr,	is-winboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	/mnt/boot-sav/sda2.
sda4	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	is-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	haswinload,	no-recov-nor-hid,	bootmgr,	is-winboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	/mnt/boot-sav/sda4.
sda5	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	recovery-or-hidden,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	/mnt/boot-sav/sda5.
sda6	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	/mnt/boot-sav/sda6.
sda7	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	/mnt/boot-sav/sda7.
sda8	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	/mnt/boot-sav/sda8.
sda9	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	recovery-or-hidden,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	/mnt/boot-sav/sda9.
sda12	: sda,	not-sepboot,	grubenv-ok	grub2,	grub-pc ,	update-grub,	32,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	/mnt/boot-sav/sda12.

sda	: GPT,	BIOS_boot,	has-correctEFI, 	not-usb,	has-os,	2048 sectors * 512 bytes


=================== parted -l:

Model: ATA HGST HTS541010A9 (scsi)
Disk /dev/sda: 1000GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt

Number  Start   End     Size    File system     Name  Flags
1      1049kB  316MB   315MB   fat32           EFI   boot
2      316MB   1259MB  944MB   ntfs            Basi  hidden
3      1259MB  1394MB  134MB                   Micr  msftres
4      1394MB  212GB   211GB   ntfs            Basi  msftdata
10      212GB   221GB   9000MB  linux-swap(v1)
11      221GB   221GB   1049kB                        bios_grub
12      221GB   275GB   53.9GB  ext4
5      275GB   276GB   367MB   ntfs                  hidden
6      276GB   401GB   126GB   ntfs            Basi  msftdata
7      401GB   727GB   326GB   ntfs            Basi  msftdata
8      727GB   979GB   252GB   ntfs                  msftdata
9      979GB   1000GB  21.5GB  ntfs            Basi  hidden


Model: Lexar USB Flash Drive (scsi)
Disk /dev/sdb: 4010MB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End     Size    Type     File system  Flags
1      24.6kB  4010MB  4010MB  primary  fat32        boot

=================== parted -lm:

BYT;
/dev/sda:1000GB:scsi:512:4096:gpt:ATA HGST HTS541010A9;
1:1049kB:316MB:315MB:fat32:EFI :boot;
2:316MB:1259MB:944MB:ntfs:Basi:hidden;
3:1259MB:1394MB:134MB::Micr:msftres;
4:1394MB:212GB:211GB:ntfs:Basi:msftdata;
10:212GB:221GB:9000MB:linux-swap(v1)::;
11:221GB:221GB:1049kB:::bios_grub;
12:221GB:275GB:53.9GB:ext4::;
5:275GB:276GB:367MB:ntfs::hidden;
6:276GB:401GB:126GB:ntfs:Basi:msftdata;
7:401GB:727GB:326GB:ntfs:Basi:msftdata;
8:727GB:979GB:252GB:ntfs::msftdata;
9:979GB:1000GB:21.5GB:ntfs:Basi:hidden;

BYT;
/dev/sdb:4010MB:scsi:512:512:msdos:Lexar USB Flash Drive;
1:24.6kB:4010MB:4010MB:fat32::boot;


=================== mount:
/cow on / type overlayfs (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sdb1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /sys/firmware/efi/efivars type efivarfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=ubuntu-studio)
/dev/sda1 on /mnt/boot-sav/sda1 type vfat (rw)
/dev/sda2 on /mnt/boot-sav/sda2 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda4 on /mnt/boot-sav/sda4 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda5 on /mnt/boot-sav/sda5 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda6 on /mnt/boot-sav/sda6 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda7 on /mnt/boot-sav/sda7 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda8 on /mnt/boot-sav/sda8 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda9 on /mnt/boot-sav/sda9 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda12 on /mnt/boot-sav/sda12 type ext4 (rw)


=================== ls:
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda10 sda11 sda12 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered):  adsp alarm ashmem autofs binder block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency cuse disk dri dsp ecryptfs fb0 fd full fuse hidraw0 hidraw1 hidraw2 hpet input kmsg kvm log mapper mcelog mei mem mixer net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda10 sda11 sda12 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sdb sdb1 sg0 sg1 sg2 shm snapshot snd sr0 stderr stdin stdout sw_sync uinput urandom usb v4l vga_arbiter vhost-net video0 zero
ls /dev/mapper:  control
ls /mnt/boot-sav/sda1/1:

=================== hexdump -n512 -C /dev/sda1
00000000  eb 58 90 4d 53 44 4f 53  35 2e 30 00 02 08 5e 1b  |.X.MSDOS5.0...^.|
00000010  02 00 00 00 00 f8 00 00  3f 00 ff 00 00 08 00 00  |........?.......|
00000020  00 60 09 00 51 02 00 00  00 00 00 00 02 00 00 00  |.`..Q...........|
00000030  01 00 06 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000040  80 01 29 aa 39 52 00 4e  4f 20 4e 41 4d 45 20 20  |..).9R.NO NAME  |
00000050  20 20 46 41 54 33 32 20  20 20 33 c9 8e d1 bc f4  |  FAT32   3.....|
00000060  7b 8e c1 8e d9 bd 00 7c  88 56 40 88 4e 02 8a 56  |{......|.V@.N..V|
00000070  40 b4 41 bb aa 55 cd 13  72 10 81 fb 55 aa 75 0a  |@.A..U..r...U.u.|
00000080  f6 c1 01 74 05 fe 46 02  eb 2d 8a 56 40 b4 08 cd  |...t..F..-.V@...|
00000090  13 73 05 b9 ff ff 8a f1  66 0f b6 c6 40 66 0f b6  |.s......f...@f..|
000000a0  d1 80 e2 3f f7 e2 86 cd  c0 ed 06 41 66 0f b7 c9  |...?.......Af...|
000000b0  66 f7 e1 66 89 46 f8 83  7e 16 00 75 39 83 7e 2a  |f..f.F..~..u9.~*|
000000c0  00 77 33 66 8b 46 1c 66  83 c0 0c bb 00 80 b9 01  |.w3f.F.f........|
000000d0  00 e8 2c 00 e9 a8 03 a1  f8 7d 80 c4 7c 8b f0 ac  |..,......}..|...|
000000e0  84 c0 74 17 3c ff 74 09  b4 0e bb 07 00 cd 10 eb  |..t.<.t.........|
000000f0  ee a1 fa 7d eb e4 a1 7d  80 eb df 98 cd 16 cd 19  |...}...}........|
00000100  66 60 80 7e 02 00 0f 84  20 00 66 6a 00 66 50 06  |f`.~.... .fj.fP.|
00000110  53 66 68 10 00 01 00 b4  42 8a 56 40 8b f4 cd 13  |Sfh.....B.V@....|
00000120  66 58 66 58 66 58 66 58  eb 33 66 3b 46 f8 72 03  |fXfXfXfX.3f;F.r.|
00000130  f9 eb 2a 66 33 d2 66 0f  b7 4e 18 66 f7 f1 fe c2  |..*f3.f..N.f....|
00000140  8a ca 66 8b d0 66 c1 ea  10 f7 76 1a 86 d6 8a 56  |..f..f....v....V|
00000150  40 8a e8 c0 e4 06 0a cc  b8 01 02 cd 13 66 61 0f  |@............fa.|
00000160  82 74 ff 81 c3 00 02 66  40 49 75 94 c3 42 4f 4f  |.t.....f@Iu..BOO|
00000170  54 4d 47 52 20 20 20 20  00 00 00 00 00 00 00 00  |TMGR    ........|
00000180  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001a0  00 00 00 00 00 00 00 00  00 00 00 00 0d 0a 44 69  |..............Di|
000001b0  73 6b 20 65 72 72 6f 72  ff 0d 0a 50 72 65 73 73  |sk error...Press|
000001c0  20 61 6e 79 20 6b 65 79  20 74 6f 20 72 65 73 74  | any key to rest|
000001d0  61 72 74 0d 0a 00 00 00  00 00 00 00 00 00 00 00  |art.............|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 00 00  ac 01 b9 01 00 00 55 aa  |..............U.|
00000200
ls /mnt/boot-sav/sda2/1:
ls /mnt/boot-sav/sda2: AsFac.log
AsPartition.ini
AsTCDProc_20130712232324.log
AsTCDProc_20130713002343.log
AsToolCDVer.txt
AsTool.state
Boot
bootmgr
bootmgr.efi
DetectResult.ini
EFI
en-us
FAC1_dism.log
FAC3_dism.log
FACLog
PASS.txt
Recovery
Sources
SWPackage.ini
System Volume Information  . Please report this message to boot.repair@gmail.com

=================== hexdump -n512 -C /dev/sda2
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 68 09 00  |........?....h..|
00000020  00 00 00 00 80 00 80 00  ff 1f 1c 00 00 00 00 00  |................|
00000030  ff 2b 01 00 00 00 00 00  ff c1 01 00 00 00 00 00  |.+..............|
00000040  f6 00 00 00 01 00 00 00  45 af cd 5a f2 cd 5a 36  |........E..Z..Z6|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 dd 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  4b 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |K.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 52 11 16  68 09 00 66 53 66 53 66  |h...hR..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a 33 c0 bf  |U...h..fa....3..|
00000110  0a 13 b9 f6 0c fc f3 aa  e9 fe 01 90 90 66 60 1e  |.............f`.|
00000120  06 66 a1 11 00 66 03 06  1c 00 1e 66 68 00 00 00  |.f...f.....fh...|
00000130  00 66 50 06 53 68 01 00  68 10 00 b4 42 8a 16 0e  |.fP.Sh..h...B...|
00000140  00 16 1f 8b f4 cd 13 66  59 5b 5a 66 59 66 59 1f  |.......fY[ZfYfY.|
00000150  0f 82 16 00 66 ff 06 11  00 03 16 0f 00 8e c2 ff  |....f...........|
00000160  0e 16 00 75 bc 07 1f 66  61 c3 a1 f6 01 e8 09 00  |...u...fa.......|
00000170  a1 fa 01 e8 03 00 f4 eb  fd 8b f0 ac 3c 00 74 09  |............<.t.|
00000180  b4 0e bb 07 00 cd 10 eb  f2 c3 0d 0a 41 20 64 69  |............A di|
00000190  73 6b 20 72 65 61 64 20  65 72 72 6f 72 20 6f 63  |sk read error oc|
000001a0  63 75 72 72 65 64 00 0d  0a 42 4f 4f 54 4d 47 52  |curred...BOOTMGR|
000001b0  20 69 73 20 63 6f 6d 70  72 65 73 73 65 64 00 0d  | is compressed..|
000001c0  0a 50 72 65 73 73 20 43  74 72 6c 2b 41 6c 74 2b  |.Press Ctrl+Alt+|
000001d0  44 65 6c 20 74 6f 20 72  65 73 74 61 72 74 0d 0a  |Del to restart..|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 8a 01  a7 01 bf 01 00 00 55 aa  |..............U.|
00000200

=================== hexdump -n512 -C /dev/sda4
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 88 29 00  |........?.....).|
00000020  00 00 00 00 80 00 80 00  ff 67 8f 18 00 00 00 00  |.........g......|
00000030  00 00 0c 00 00 00 00 00  7f 35 e9 02 00 00 00 00  |.........5......|
00000040  f6 00 00 00 01 00 00 00  51 ff d1 48 38 d2 48 ae  |........Q..H8.H.|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 dd 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  4b 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |K.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 52 11 16  68 09 00 66 53 66 53 66  |h...hR..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a 33 c0 bf  |U...h..fa....3..|
00000110  0a 13 b9 f6 0c fc f3 aa  e9 fe 01 90 90 66 60 1e  |.............f`.|
00000120  06 66 a1 11 00 66 03 06  1c 00 1e 66 68 00 00 00  |.f...f.....fh...|
00000130  00 66 50 06 53 68 01 00  68 10 00 b4 42 8a 16 0e  |.fP.Sh..h...B...|
00000140  00 16 1f 8b f4 cd 13 66  59 5b 5a 66 59 66 59 1f  |.......fY[ZfYfY.|
00000150  0f 82 16 00 66 ff 06 11  00 03 16 0f 00 8e c2 ff  |....f...........|
00000160  0e 16 00 75 bc 07 1f 66  61 c3 a1 f6 01 e8 09 00  |...u...fa.......|
00000170  a1 fa 01 e8 03 00 f4 eb  fd 8b f0 ac 3c 00 74 09  |............<.t.|
00000180  b4 0e bb 07 00 cd 10 eb  f2 c3 0d 0a 41 20 64 69  |............A di|
00000190  73 6b 20 72 65 61 64 20  65 72 72 6f 72 20 6f 63  |sk read error oc|
000001a0  63 75 72 72 65 64 00 0d  0a 42 4f 4f 54 4d 47 52  |curred...BOOTMGR|
000001b0  20 69 73 20 63 6f 6d 70  72 65 73 73 65 64 00 0d  | is compressed..|
000001c0  0a 50 72 65 73 73 20 43  74 72 6c 2b 41 6c 74 2b  |.Press Ctrl+Alt+|
000001d0  44 65 6c 20 74 6f 20 72  65 73 74 61 72 74 0d 0a  |Del to restart..|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 8a 01  a7 01 bf 01 00 00 55 aa  |..............U.|
00000200

=================== hexdump -n512 -C /dev/sda5
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 f0 0b 20  |........?...... |
00000020  00 00 00 00 80 00 80 00  ff ef 0a 00 00 00 00 00  |................|
00000030  aa 74 00 00 00 00 00 00  02 00 00 00 00 00 00 00  |.t..............|
00000040  f6 00 00 00 01 00 00 00  61 8e 2d 46 c4 2d 46 ae  |........a.-F.-F.|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 dd 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  4b 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |K.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 52 11 16  68 09 00 66 53 66 53 66  |h...hR..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a 33 c0 bf  |U...h..fa....3..|
00000110  0a 13 b9 f6 0c fc f3 aa  e9 fe 01 90 90 66 60 1e  |.............f`.|
00000120  06 66 a1 11 00 66 03 06  1c 00 1e 66 68 00 00 00  |.f...f.....fh...|
00000130  00 66 50 06 53 68 01 00  68 10 00 b4 42 8a 16 0e  |.fP.Sh..h...B...|
00000140  00 16 1f 8b f4 cd 13 66  59 5b 5a 66 59 66 59 1f  |.......fY[ZfYfY.|
00000150  0f 82 16 00 66 ff 06 11  00 03 16 0f 00 8e c2 ff  |....f...........|
00000160  0e 16 00 75 bc 07 1f 66  61 c3 a1 f6 01 e8 09 00  |...u...fa.......|
00000170  a1 fa 01 e8 03 00 f4 eb  fd 8b f0 ac 3c 00 74 09  |............<.t.|
00000180  b4 0e bb 07 00 cd 10 eb  f2 c3 0d 0a 45 72 72 65  |............Erre|
00000190  75 72 20 6c 65 63 74 75  72 65 20 64 69 73 71 75  |ur lecture disqu|
000001a0  65 00 0d 0a 42 4f 4f 54  4d 47 52 20 63 6f 6d 70  |e...BOOTMGR comp|
000001b0  72 65 73 73 82 00 0d 0a  43 74 72 6c 2b 41 6c 74  |ress....Ctrl+Alt|
000001c0  2b 53 75 70 70 72 20 70  6f 75 72 20 72 65 64 82  |+Suppr pour red.|
000001d0  6d 61 72 72 65 72 0d 0a  00 73 74 61 72 74 0d 0a  |marrer...start..|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 8a 01  a2 01 b6 01 00 00 55 aa  |..............U.|
00000200

=================== hexdump -n512 -C /dev/sda6
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 e0 16 20  |........?...... |
00000020  00 00 00 00 80 00 80 00  ff f7 a5 0e 00 00 00 00  |................|
00000030  00 00 0c 00 00 00 00 00  02 00 00 00 00 00 00 00  |................|
00000040  f6 00 00 00 01 00 00 00  41 49 e7 6e 85 e7 6e ea  |........AI.n..n.|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 dd 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  4b 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |K.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 52 11 16  68 09 00 66 53 66 53 66  |h...hR..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a 33 c0 bf  |U...h..fa....3..|
00000110  0a 13 b9 f6 0c fc f3 aa  e9 fe 01 90 90 66 60 1e  |.............f`.|
00000120  06 66 a1 11 00 66 03 06  1c 00 1e 66 68 00 00 00  |.f...f.....fh...|
00000130  00 66 50 06 53 68 01 00  68 10 00 b4 42 8a 16 0e  |.fP.Sh..h...B...|
00000140  00 16 1f 8b f4 cd 13 66  59 5b 5a 66 59 66 59 1f  |.......fY[ZfYfY.|
00000150  0f 82 16 00 66 ff 06 11  00 03 16 0f 00 8e c2 ff  |....f...........|
00000160  0e 16 00 75 bc 07 1f 66  61 c3 a1 f6 01 e8 09 00  |...u...fa.......|
00000170  a1 fa 01 e8 03 00 f4 eb  fd 8b f0 ac 3c 00 74 09  |............<.t.|
00000180  b4 0e bb 07 00 cd 10 eb  f2 c3 0d 0a 45 72 72 65  |............Erre|
00000190  75 72 20 6c 65 63 74 75  72 65 20 64 69 73 71 75  |ur lecture disqu|
000001a0  65 00 0d 0a 42 4f 4f 54  4d 47 52 20 63 6f 6d 70  |e...BOOTMGR comp|
000001b0  72 65 73 73 82 00 0d 0a  43 74 72 6c 2b 41 6c 74  |ress....Ctrl+Alt|
000001c0  2b 53 75 70 70 72 20 70  6f 75 72 20 72 65 64 82  |+Suppr pour red.|
000001d0  6d 61 72 72 65 72 0d 0a  00 73 74 61 72 74 0d 0a  |marrer...start..|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 8a 01  a2 01 b6 01 00 00 55 aa  |..............U.|
00000200

=================== hexdump -n512 -C /dev/sda7
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 e0 bc 2e  |........?.......|
00000020  00 00 00 00 80 00 80 00  ff 37 e7 25 00 00 00 00  |.........7.%....|
00000030  00 00 0c 00 00 00 00 00  02 00 00 00 00 00 00 00  |................|
00000040  f6 00 00 00 01 00 00 00  b4 00 36 1c 27 36 1c 98  |..........6.'6..|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 dd 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  4b 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |K.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 52 11 16  68 09 00 66 53 66 53 66  |h...hR..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a 33 c0 bf  |U...h..fa....3..|
00000110  0a 13 b9 f6 0c fc f3 aa  e9 fe 01 90 90 66 60 1e  |.............f`.|
00000120  06 66 a1 11 00 66 03 06  1c 00 1e 66 68 00 00 00  |.f...f.....fh...|
00000130  00 66 50 06 53 68 01 00  68 10 00 b4 42 8a 16 0e  |.fP.Sh..h...B...|
00000140  00 16 1f 8b f4 cd 13 66  59 5b 5a 66 59 66 59 1f  |.......fY[ZfYfY.|
00000150  0f 82 16 00 66 ff 06 11  00 03 16 0f 00 8e c2 ff  |....f...........|
00000160  0e 16 00 75 bc 07 1f 66  61 c3 a1 f6 01 e8 09 00  |...u...fa.......|
00000170  a1 fa 01 e8 03 00 f4 eb  fd 8b f0 ac 3c 00 74 09  |............<.t.|
00000180  b4 0e bb 07 00 cd 10 eb  f2 c3 0d 0a 41 20 64 69  |............A di|
00000190  73 6b 20 72 65 61 64 20  65 72 72 6f 72 20 6f 63  |sk read error oc|
000001a0  63 75 72 72 65 64 00 0d  0a 42 4f 4f 54 4d 47 52  |curred...BOOTMGR|
000001b0  20 69 73 20 63 6f 6d 70  72 65 73 73 65 64 00 0d  | is compressed..|
000001c0  0a 50 72 65 73 73 20 43  74 72 6c 2b 41 6c 74 2b  |.Press Ctrl+Alt+|
000001d0  44 65 6c 20 74 6f 20 72  65 73 74 61 72 74 0d 0a  |Del to restart..|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 8a 01  a7 01 bf 01 00 00 55 aa  |..............U.|
00000200

=================== hexdump -n512 -C /dev/sda8
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 00 00 00  |........?.......|
00000020  00 00 00 00 80 00 80 00  ff f7 4b 1d 00 00 00 00  |..........K.....|
00000030  00 00 0c 00 00 00 00 00  02 00 00 00 00 00 00 00  |................|
00000040  f6 00 00 00 01 00 00 00  29 eb 48 ce 35 49 ce 3a  |........).H.5I.:|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 dd 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  4b 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |K.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 52 11 16  68 09 00 66 53 66 53 66  |h...hR..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a 33 c0 bf  |U...h..fa....3..|
00000110  0a 13 b9 f6 0c fc f3 aa  e9 fe 01 90 90 66 60 1e  |.............f`.|
00000120  06 66 a1 11 00 66 03 06  1c 00 1e 66 68 00 00 00  |.f...f.....fh...|
00000130  00 66 50 06 53 68 01 00  68 10 00 b4 42 8a 16 0e  |.fP.Sh..h...B...|
00000140  00 16 1f 8b f4 cd 13 66  59 5b 5a 66 59 66 59 1f  |.......fY[ZfYfY.|
00000150  0f 82 16 00 66 ff 06 11  00 03 16 0f 00 8e c2 ff  |....f...........|
00000160  0e 16 00 75 bc 07 1f 66  61 c3 a1 f6 01 e8 09 00  |...u...fa.......|
00000170  a1 fa 01 e8 03 00 f4 eb  fd 8b f0 ac 3c 00 74 09  |............<.t.|
00000180  b4 0e bb 07 00 cd 10 eb  f2 c3 0d 0a 45 72 72 65  |............Erre|
00000190  75 72 20 6c 65 63 74 75  72 65 20 64 69 73 71 75  |ur lecture disqu|
000001a0  65 00 0d 0a 42 4f 4f 54  4d 47 52 20 63 6f 6d 70  |e...BOOTMGR comp|
000001b0  72 65 73 73 82 00 0d 0a  43 74 72 6c 2b 41 6c 74  |ress....Ctrl+Alt|
000001c0  2b 53 75 70 70 72 20 70  6f 75 72 20 72 65 64 82  |+Suppr pour red.|
000001d0  6d 61 72 72 65 72 0d 0a  00 73 74 61 72 74 0d 0a  |marrer...start..|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 8a 01  a2 01 b6 01 00 00 55 aa  |..............U.|
00000200

=================== hexdump -n512 -C /dev/sda9
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 18 f0 71  |........?......q|
00000020  00 00 00 00 80 00 80 00  ff 4f 80 02 00 00 00 00  |.........O......|
00000030  00 00 0c 00 00 00 00 00  ff 04 28 00 00 00 00 00  |..........(.....|
00000040  f6 00 00 00 01 00 00 00  ce d4 d7 ee e9 d7 ee 00  |................|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 dd 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  4b 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |K.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 52 11 16  68 09 00 66 53 66 53 66  |h...hR..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a 33 c0 bf  |U...h..fa....3..|
00000110  0a 13 b9 f6 0c fc f3 aa  e9 fe 01 90 90 66 60 1e  |.............f`.|
00000120  06 66 a1 11 00 66 03 06  1c 00 1e 66 68 00 00 00  |.f...f.....fh...|
00000130  00 66 50 06 53 68 01 00  68 10 00 b4 42 8a 16 0e  |.fP.Sh..h...B...|
00000140  00 16 1f 8b f4 cd 13 66  59 5b 5a 66 59 66 59 1f  |.......fY[ZfYfY.|
00000150  0f 82 16 00 66 ff 06 11  00 03 16 0f 00 8e c2 ff  |....f...........|
00000160  0e 16 00 75 bc 07 1f 66  61 c3 a1 f6 01 e8 09 00  |...u...fa.......|
00000170  a1 fa 01 e8 03 00 f4 eb  fd 8b f0 ac 3c 00 74 09  |............<.t.|
00000180  b4 0e bb 07 00 cd 10 eb  f2 c3 0d 0a 41 20 64 69  |............A di|
00000190  73 6b 20 72 65 61 64 20  65 72 72 6f 72 20 6f 63  |sk read error oc|
000001a0  63 75 72 72 65 64 00 0d  0a 42 4f 4f 54 4d 47 52  |curred...BOOTMGR|
000001b0  20 69 73 20 63 6f 6d 70  72 65 73 73 65 64 00 0d  | is compressed..|
000001c0  0a 50 72 65 73 73 20 43  74 72 6c 2b 41 6c 74 2b  |.Press Ctrl+Alt+|
000001d0  44 65 6c 20 74 6f 20 72  65 73 74 61 72 74 0d 0a  |Del to restart..|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 8a 01  a7 01 bf 01 00 00 55 aa  |..............U.|
00000200

WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.


=================== df -Th:

Filesystem     Type       Size  Used Avail Use% Mounted on
/cow           overlayfs  3.9G  196M  3.7G   5% /
udev           devtmpfs   3.9G   12K  3.9G   1% /dev
tmpfs          tmpfs      788M  1.3M  786M   1% /run
/dev/sdb1      vfat       3.8G  3.8G  256K 100% /cdrom
/dev/loop0     squashfs   1.9G  1.9G     0 100% /rofs
none           tmpfs      4.0K     0  4.0K   0% /sys/fs/cgroup
tmpfs          tmpfs      3.9G   12K  3.9G   1% /tmp
none           tmpfs      5.0M     0  5.0M   0% /run/lock
none           tmpfs      3.9G   76K  3.9G   1% /run/shm
none           tmpfs      100M   24K  100M   1% /run/user
/dev/sda1      vfat       296M   36M  261M  12% /mnt/boot-sav/sda1
/dev/sda2      fuseblk    900M  359M  542M  40% /mnt/boot-sav/sda2
/dev/sda4      fuseblk    197G  133G   64G  68% /mnt/boot-sav/sda4
/dev/sda5      fuseblk    350M  292M   59M  84% /mnt/boot-sav/sda5
/dev/sda6      fuseblk    118G  261M  117G   1% /mnt/boot-sav/sda6
/dev/sda7      fuseblk    304G   94G  210G  31% /mnt/boot-sav/sda7
/dev/sda8      fuseblk    235G  148G   88G  63% /mnt/boot-sav/sda8
/dev/sda9      fuseblk     21G   15G  5.5G  73% /mnt/boot-sav/sda9
/dev/sda12     ext4        50G  5.9G   41G  13% /mnt/boot-sav/sda12

=================== fdisk -l:

Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x2adc1b83

Device Boot      Start         End      Blocks   Id  System
/dev/sda1               1  1953525167   976762583+  ee  GPT
Partition 1 does not start on physical sector boundary.

Disk /dev/sdb: 4009 MB, 4009754624 bytes
145 heads, 48 sectors/track, 1125 cylinders, total 7831552 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xc3072e18

Device Boot      Start         End      Blocks   Id  System
/dev/sdb1   *          48     7831551     3915752    b  W95 FAT32


EFI detected. Please check the options.
=================== Repair blockers
You have installed on sda12 a Linux version which is not EFI-compatible. You may want to install a 64-bit Linux instead.
=================== Final advice in case of recommended repair
Please do not forget to make your BIOS boot on sda1/efi/.../grub*.efi file!

You may want to retry after activating the [Backup and rename Windows EFI files] option.

=================== Default settings
Recommended-Repair
This setting would purge (in order to fix packages sign-grub upgrade version) and reinstall the grub-efi-amd64-signed of sda12, using the following options: upgrade-grub       sda1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s

=================== Settings chosen by the user
Boot-Info
This setting will not act on the MBR.



No change has been performed on your computer.

On y voit encore :

sda1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  Windows 8/2012: FAT32
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /EFI/Boot/bootx64.efi /EFI/ubuntustudio/MokManager.efi 
                       /EFI/ubuntustudio/grubx64.efi 
                       /EFI/ubuntustudio/shimx64.efi 
                       /EFI/Microsoft/Boot/bootmgfw.efi 
                       /EFI/Microsoft/Boot/bootmgr.efi 
                       /EFI/Microsoft/Boot/memtest.efi

C'est à dire la directorie "ubuntustudio" qui est indésirable (c'est idem que dans le post #7). Je te suggère de faire une installation de Ubuntu (et non pas de Ubuntu studio) 14.04 pour qu'on puisse s'assurer que le problème est bien là et qu'il n'y a pas autre chose qui bloque. Tu peux faire une liveUSB en utilisant la même procédure que là : http://forum.ubuntu-fr.org/viewtopic.ph … #p15304131
sauf que l'ISO à télécharger à l'avance est trusty-desktop-amd64.iso sur cette page : http://cdimage.ubuntu.com/daily-live/current/

Dernière modification par malbo (Le 10/04/2014, à 11:30)


MedionPC MT5 MED MT 162 / pentium IV / RAM 1Go / Radeon HD 3450 AGP / XP, HandyLinux et Xubuntu 14.04 32 bits
Acer Aspire M5100-5F7N / Phenom Quad Core 9500 / ATI HD 2600 pro / RAM 4 Go / Win8, XP et Ubuntu 14.04

Hors ligne

#15 Le 10/04/2014, à 11:33

Pierre_mira

Re : [Résolu] Problème grub2 windows 8.1 et ubuntu studio13.10

D'accord je fais ça. J'avais cru voir qu'ils avaient corrigé dans la version 14.04 d'ubuntu studio, c'est pour ça que je me suis acharné à installer ubuntu studio...

Hors ligne

#16 Le 10/04/2014, à 11:57

maxire

Re : [Résolu] Problème grub2 windows 8.1 et ubuntu studio13.10

Bonjour,

Disons qu'ils indiquent bien avoir corrigé un problème, mais ce n'est peut-être pas le bon.

Une chose bizarre dans le boot-info de la deuxième tentative:

============================= Boot Info Summary: ===============================

 => Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 
    432351232 of the same hard drive for core.img. core.img is at this 
    location and looks in partition 112 for .

Il existe une partition en plus de celles présentes suite à la première installation celle-ci:

sda11: _________________________________________________________________________

    File system:       BIOS Boot partition
    Boot sector type:  Grub2's core.img
    Boot sector info: 

+ je vois que dans sda12 nous avons ceci:

sda12: _________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu Trusty Tahr (development branch) 
    Boot files:        /boot/grub/grub.cfg /etc/fstab 
                       /boot/grub/i386-pc/core.img

/boot/grub/i386-pc/core.img, cette ligne est curieuse, cela ressemble à une tentative d'installation non efi, je ne comprends pas à quoi sert la partition sda11 "Bios Boot partition", qu'est-ce que cela vient faire dans une installation en mode EFI?
Tout ceci est réellement étrange.

Dernière modification par maxire (Le 10/04/2014, à 11:59)


Maxire
Archlinux/Mate + Ubuntu 10,04 sur portable -- Archlinux/Mate sur poste de travail +  LFS, Trusty/Unity en VM, Windows XP en VM

Hors ligne

#17 Le 10/04/2014, à 12:18

malbo

Re : [Résolu] Problème grub2 windows 8.1 et ubuntu studio13.10

Tu as raison maxire, mon analyse du post #14 est mauvaise : en fait, Ubuntu Studio 14.04 est installé en mode non-EFI dans le post #14 alors que dans le post #7, c'est une installation en mode EFI. Moi, je ne m'étais aperçu de rien.   
Dans la partie "PARTITIONS & DISKS" du Boot-Info du post #14, on voit :

sda12	: sda,	not-sepboot,	grubenv-ok	grub2,	grub-pc ,	update-grub,	32,

C'est une version 32 bits de Ubuntu Studio 14.04 qui a été utilisée par Pierre_mira et on ne peut pas faire une installation en mode EFI avec une version 32 bits sur le support live : il faut une version 64 bits.
Sur cette page : http://cdimage.ubuntu.com/ubuntustudio/dvd/pending/
Il faut sélectionner l'iso trusty-dvd-amd64.iso et non pas l'iso dont le nom se termine par i386.iso qui est la version 32 bits

Dernière modification par malbo (Le 10/04/2014, à 12:26)


MedionPC MT5 MED MT 162 / pentium IV / RAM 1Go / Radeon HD 3450 AGP / XP, HandyLinux et Xubuntu 14.04 32 bits
Acer Aspire M5100-5F7N / Phenom Quad Core 9500 / ATI HD 2600 pro / RAM 4 Go / Win8, XP et Ubuntu 14.04

Hors ligne

#18 Le 10/04/2014, à 12:56

Pierre_mira

Re : [Résolu] Problème grub2 windows 8.1 et ubuntu studio13.10

D'accord, je comprend mieux pourquoi je n'avais pas l'option pour lancer le dvd en mode efi..
Du coup j'essaie avec ubuntu studio ou avec ubuntu?

Hors ligne

#19 Le 10/04/2014, à 12:59

malbo

Re : [Résolu] Problème grub2 windows 8.1 et ubuntu studio13.10

Essaie Ubuntu 14.04 (*). Si c'est un succès, tu l'écraseras pour le remplacer par Ubuntu Studio 14.04.

(*) je t'ai donné le lien direct pour le télécharger en bas du post #14

Dernière modification par malbo (Le 10/04/2014, à 13:01)


MedionPC MT5 MED MT 162 / pentium IV / RAM 1Go / Radeon HD 3450 AGP / XP, HandyLinux et Xubuntu 14.04 32 bits
Acer Aspire M5100-5F7N / Phenom Quad Core 9500 / ATI HD 2600 pro / RAM 4 Go / Win8, XP et Ubuntu 14.04

Hors ligne

#20 Le 10/04/2014, à 13:13

Pierre_mira

Re : [Résolu] Problème grub2 windows 8.1 et ubuntu studio13.10

D'accord, et merci des réponses.
Et du coup est ce qu'il y a des partitions a effacer? S'il y a eu des tentatives d'installation et qu'il y a des partitions qui ne marchent pas ou qui ne servent à rien?

Hors ligne

#21 Le 10/04/2014, à 13:25

malbo

Re : [Résolu] Problème grub2 windows 8.1 et ubuntu studio13.10

La présence de la partition "BIOS Boot partition" n'est pas gênante : tu peux la laisser. N'oublie pas - quelque soit le cas - de sélectionner "Autre chose" à l'étape 3 de l'installation. Sinon, c'est ton Windows 8 qui va se faire écraser.


MedionPC MT5 MED MT 162 / pentium IV / RAM 1Go / Radeon HD 3450 AGP / XP, HandyLinux et Xubuntu 14.04 32 bits
Acer Aspire M5100-5F7N / Phenom Quad Core 9500 / ATI HD 2600 pro / RAM 4 Go / Win8, XP et Ubuntu 14.04

Hors ligne

#22 Le 10/04/2014, à 14:01

Pierre_mira

Re : [Résolu] Problème grub2 windows 8.1 et ubuntu studio13.10

Ok, merci des conseils,
Je suis en train de télécharger (j'ai pas une super connexion...).
Je tiens au courant si ça marche !

Hors ligne

#23 Le 10/04/2014, à 20:29

Pierre_mira

Re : [Résolu] Problème grub2 windows 8.1 et ubuntu studio13.10

C'est bon, tout marche bien !
Vraiment merci pour votre aide.
Je téléchargerais plus tard ubuntu studio version  64bits, en espérant qu'il marchera aussi.
Ps: je ne trouve pas comment mettre le sujet en résolu?

Dernière modification par Pierre_mira (Le 10/04/2014, à 20:32)

Hors ligne

#24 Le 11/04/2014, à 06:15

malbo

Re : [Résolu] Problème grub2 windows 8.1 et ubuntu studio13.10

Pour que ton expérience puisse servir à d'autres, ce serait bien que tu prennes le temps de répondre à ces deux demandes :
1) préciser le nom de ton modèle d'ordi (le nom commercial complet, genre "UX31A-R4003P" et pas seulement "UX31A") et le fabricant
2) que tu fasses un dernier Boot-Info pour qu'on puisse voir l'état final

Dernière modification par malbo (Le 11/04/2014, à 06:17)


MedionPC MT5 MED MT 162 / pentium IV / RAM 1Go / Radeon HD 3450 AGP / XP, HandyLinux et Xubuntu 14.04 32 bits
Acer Aspire M5100-5F7N / Phenom Quad Core 9500 / ATI HD 2600 pro / RAM 4 Go / Win8, XP et Ubuntu 14.04

Hors ligne

#25 Le 11/04/2014, à 12:07

Pierre_mira

Re : [Résolu] Problème grub2 windows 8.1 et ubuntu studio13.10

Alors, mon ordinateur est un Asus N76VB TZ130H.
Et voici mon dernier boot-info : http://paste.ubuntu.com/7234182/

Hors ligne

Haut de page ↑