Pages : 1
#1 Le 13/04/2008, à 23:08
- FireLight
Bug Kernel 2.6.24-16
Bonjour tout le monde !
J'ai remis à 0 mon Ubuntu Linux ce soir. Avec les petites bidouilles de KDE 4.0, ça m'avait mis un peu la pagaille, et comme la prochaine version sortira après mes vacances, je me suis dis que la Beta allait peut-être aller pour le moment.
Mis à part certains périples pour installer et configurer le réseau, j'ai mis à jour ma Ubuntu. Bon, une heure en tout, je reboot, et là... Plantage du Kernel (comme ça m'avait fait lors de ma migration 7.10 à 8.04).
En effet, le kernel a été mis à jour vers la version 2.6.24-16 (au lieu de 2.6.24-14). Et avec ce kernel, c'est un vrai chantier. Un ou plusieurs modules me font planter le démarrage, mes disques durs ne sont en hda et hdb mais sda et sdb, j'en passe des meilleurs.
Comme le système de fichier étant en read only, j'ai mis tout le dmesg vers ma clé USB. Voilà ce que ça donne :
[ 0.000000] Linux version 2.6.24-16-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:23:42 UTC 2008 (Ubuntu 2.6.24-16.30-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000002fff0000 (usable)
[ 0.000000] BIOS-e820: 000000002fff0000 - 000000002fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000002fff3000 - 0000000030000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 767MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f4df0
[ 0.000000] Entering add_active_range(0, 0, 196592) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 196592
[ 0.000000] HighMem 196592 -> 196592
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 196592
[ 0.000000] On node 0 totalpages: 196592
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1503 pages used for memmap
[ 0.000000] Normal zone: 190993 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F6780 checksum 0
[ 0.000000] ACPI: RSDP 000F6780, 0014 (r0 GBT )
[ 0.000000] ACPI: RSDT 2FFF3000, 002C (r1 GBT AWRDACPI 42302E31 AWRD 1010101)
[ 0.000000] ACPI: FACP 2FFF3040, 0074 (r1 GBT AWRDACPI 42302E31 AWRD 1010101)
[ 0.000000] ACPI: DSDT 2FFF30C0, 46EC (r1 GBT AWRDACPI 1000 MSFT 100000C)
[ 0.000000] ACPI: FACS 2FFF0000, 0040
[ 0.000000] ACPI: APIC 2FFF77C0, 005A (r1 GBT AWRDACPI 42302E31 AWRD 1010101)
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:10 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 30000000:cec00000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 195057
[ 0.000000] Kernel command line: root=UUID=3fcce1bd-cb62-43e8-8be9-a5a4cbb2a908 ro single
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1919.580 MHz processor.
[ 16.543796] Console: colour VGA+ 80x25
[ 16.543800] console [tty0] enabled
[ 16.547311] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 16.547957] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 16.571434] Memory: 767396k/786368k available (2157k kernel code, 18316k reserved, 998k data, 364k init, 0k highmem)
[ 16.571513] virtual kernel memory layout:
[ 16.571514] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 16.571515] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 16.571517] vmalloc : 0xf0800000 - 0xff7fe000 ( 239 MB)
[ 16.571518] lowmem : 0xc0000000 - 0xefff0000 ( 767 MB)
[ 16.571519] .init : 0xc041b000 - 0xc0476000 ( 364 kB)
[ 16.571521] .data : 0xc031b5a4 - 0xc0414dc4 ( 998 kB)
[ 16.571522] .text : 0xc0100000 - 0xc031b5a4 (2157 kB)
[ 16.571948] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 16.572100] SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 16.652127] Calibrating delay using timer specific routine.. 3842.84 BogoMIPS (lpj=7685691)
[ 16.652266] Security Framework initialized
[ 16.652325] SELinux: Disabled at boot.
[ 16.652398] AppArmor: AppArmor initialized
[ 16.652454] Failure registering capabilities with primary security module.
[ 16.652519] Mount-cache hash table entries: 512
[ 16.652719] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000 00000000
[ 16.652729] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 16.652788] CPU: L2 Cache: 512K (64 bytes/line)
[ 16.652843] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000 00000000
[ 16.652854] Compat vDSO mapped to ffffe000.
[ 16.652919] Checking 'hlt' instruction... OK.
[ 16.668403] SMP alternatives: switching to UP code
[ 16.669573] Freeing SMP alternatives: 11k freed
[ 16.669760] Early unpacking initramfs... done
[ 17.013073] ACPI: Core revision 20070126
[ 17.013230] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 17.349695] CPU0: AMD Athlon(tm) XP 2600+ stepping 00
[ 17.349857] Total of 1 processors activated (3842.84 BogoMIPS).
[ 17.350640] ENABLING IO-APIC IRQs
[ 17.351000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 17.495534] Brought up 1 CPUs
[ 17.495648] CPU0 attaching sched-domain:
[ 17.495651] domain 0: span 01
[ 17.495653] groups: 01
[ 17.495884] net_namespace: 64 bytes
[ 17.495943] Booting paravirtualized kernel on bare hardware
[ 17.496518] Time: 22:43:47 Date: 04/13/08
[ 17.496607] NET: Registered protocol family 16
[ 17.496896] EISA bus registered
[ 17.496974] ACPI: bus type pci registered
[ 17.502035] PCI: PCI BIOS revision 2.10 entry at 0xfa070, last bus=1
[ 17.502092] PCI: Using configuration type 1
[ 17.502145] Setting up standard PCI resources
[ 17.507257] ACPI: EC: Look up EC in DSDT
[ 17.511874] ACPI: Interpreter enabled
[ 17.511939] ACPI: (supports S0 S3 S4 S5)
[ 17.512156] ACPI: Using IOAPIC for interrupt routing
[ 17.517890] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 17.518796] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 17.548431] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12)
[ 17.548965] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 12) *5
[ 17.549530] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12)
[ 17.550057] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *5
[ 17.550599] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 17.551185] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 17.551783] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 17.552369] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 17.553014] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0
[ 17.553386] ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0
[ 17.553775] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0
[ 17.554145] ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0
[ 17.554467] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 17.554553] pnp: PnP ACPI init
[ 17.554612] ACPI: bus type pnp registered
[ 17.558281] pnp: PnP ACPI: found 15 devices
[ 17.558335] ACPI: ACPI bus type pnp unregistered
[ 17.558392] PnPBIOS: Disabled by ACPI PNP
[ 17.558718] PCI: Using ACPI for IRQ routing
[ 17.558773] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 17.587448] NET: Registered protocol family 8
[ 17.587503] NET: Registered protocol family 20
[ 17.587637] AppArmor: AppArmor Filesystem Enabled
[ 17.591405] Time: tsc clocksource has been installed.
[ 17.599438] system 00:00: iomem range 0xcee00-0xcffff has been reserved
[ 17.599496] system 00:00: iomem range 0xf0000-0xf7fff could not be reserved
[ 17.599554] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
[ 17.599611] system 00:00: iomem range 0xfc000-0xfffff could not be reserved
[ 17.599669] system 00:00: iomem range 0x2fff0000-0x2fffffff could not be reserved
[ 17.599737] system 00:00: iomem range 0xffff0000-0xffffffff could not be reserved
[ 17.599805] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 17.599862] system 00:00: iomem range 0x100000-0x2ffeffff could not be reserved
[ 17.599930] system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 17.599998] system 00:00: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 17.600066] system 00:00: iomem range 0xfff80000-0xfffeffff has been reserved
[ 17.600126] system 00:02: ioport range 0x4000-0x407f has been reserved
[ 17.600183] system 00:02: ioport range 0x40f0-0x40ff has been reserved
[ 17.600240] system 00:02: ioport range 0x5000-0x500f has been reserved
[ 17.600300] system 00:03: ioport range 0x4d0-0x4d1 has been reserved
[ 17.600356] system 00:03: ioport range 0x290-0x29f has been reserved
[ 17.600413] system 00:03: ioport range 0x800-0x805 has been reserved
[ 17.630904] PCI: Bridge: 0000:00:01.0
[ 17.630957] IO window: disabled.
[ 17.631012] MEM window: e8000000-eaffffff
[ 17.631066] PREFETCH window: d0000000-dfffffff
[ 17.631134] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 17.631147] NET: Registered protocol family 2
[ 17.667459] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 17.667939] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 17.669829] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 17.670797] TCP: Hash tables configured (established 131072 bind 65536)
[ 17.670855] TCP reno registered
[ 17.679527] checking if image is initramfs... it is
[ 18.130992] Switched to high resolution mode on CPU 0
[ 18.323738] Freeing initrd memory: 7266k freed
[ 18.324598] audit: initializing netlink socket (disabled)
[ 18.324669] audit(1208126627.316:1): initialized
[ 18.326984] VFS: Disk quotas dquot_6.5.1
[ 18.327119] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 18.327330] io scheduler noop registered
[ 18.327384] io scheduler anticipatory registered
[ 18.327438] io scheduler deadline registered
[ 18.327500] io scheduler cfq registered (default)
[ 18.327565] PCI: VIA PCI bridge detected. Disabling DAC.
[ 18.327699] PCI: Bypassing VIA 8237 APIC De-Assert Message
[ 18.327760] Boot video device is 0000:01:00.0
[ 18.328063] isapnp: Scanning for PnP cards...
[ 18.681399] isapnp: No Plug & Play device found
[ 18.713713] Real Time Clock Driver v1.12ac
[ 18.713891] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 18.714080] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 18.714261] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 18.715204] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 18.715464] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 18.716384] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 18.716529] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 18.716709] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 18.718660] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 18.718719] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 18.726497] mice: PS/2 mouse device common for all mice
[ 18.726676] EISA: Probing bus 0 at eisa.0
[ 18.726746] Cannot allocate resource for EISA slot 4
[ 18.726800] Cannot allocate resource for EISA slot 5
[ 18.726865] EISA: Detected 0 cards.
[ 18.726920] cpuidle: using governor ladder
[ 18.726973] cpuidle: using governor menu
[ 18.727176] NET: Registered protocol family 1
[ 18.727258] Using IPI No-Shortcut mode
[ 18.727350] registered taskstats version 1
[ 18.727508] Magic number: 4:981:754
[ 18.727772] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 18.727828] EDD information not available.
[ 18.728381] Freeing unused kernel memory: 364k freed
[ 18.754380] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 18.947678] fuse init (API version 7.9)
[ 19.609756] usbcore: registered new interface driver usbfs
[ 19.609846] usbcore: registered new interface driver hub
[ 19.624494] usbcore: registered new device driver usb
[ 19.657601] USB Universal Host Controller Interface driver v3.0
[ 19.657766] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 16
[ 19.657887] uhci_hcd 0000:00:0a.0: UHCI Host Controller
[ 19.658252] uhci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 1
[ 19.658351] uhci_hcd 0000:00:0a.0: irq 16, io base 0x0000c000
[ 19.658576] usb usb1: configuration #1 chosen from 1 choice
[ 19.658658] hub 1-0:1.0: USB hub found
[ 19.658717] hub 1-0:1.0: 2 ports detected
[ 19.707280] SCSI subsystem initialized
[ 19.760880] libata version 3.00 loaded.
[ 19.761597] ACPI: PCI Interrupt 0000:00:0a.1[b] -> GSI 19 (level, low) -> IRQ 17
[ 19.761719] uhci_hcd 0000:00:0a.1: UHCI Host Controller
[ 19.761800] uhci_hcd 0000:00:0a.1: new USB bus registered, assigned bus number 2
[ 19.761896] uhci_hcd 0000:00:0a.1: irq 17, io base 0x0000c400
[ 19.762079] usb usb2: configuration #1 chosen from 1 choice
[ 19.762165] hub 2-0:1.0: USB hub found
[ 19.762223] hub 2-0:1.0: 2 ports detected
[ 19.785477] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 19.865814] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21
[ 19.865881] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
[ 19.865943] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 18
[ 19.866101] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 19.866192] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
[ 19.866291] uhci_hcd 0000:00:10.0: irq 18, io base 0x0000d000
[ 19.866471] usb usb3: configuration #1 chosen from 1 choice
[ 19.866556] hub 3-0:1.0: USB hub found
[ 19.866614] hub 3-0:1.0: 2 ports detected
[ 19.922262] Floppy drive(s): fd0 is 1.44M
[ 19.941152] FDC 0 is a post-1991 82077
[ 19.969437] ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 18
[ 19.969600] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 19.969690] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 4
[ 19.969779] uhci_hcd 0000:00:10.1: irq 18, io base 0x0000d400
[ 19.969964] usb usb4: configuration #1 chosen from 1 choice
[ 19.970050] hub 4-0:1.0: USB hub found
[ 19.970109] hub 4-0:1.0: 2 ports detected
[ 20.073324] ACPI: PCI Interrupt 0000:00:10.2[b] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 18
[ 20.073488] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 20.073580] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 5
[ 20.073670] uhci_hcd 0000:00:10.2: irq 18, io base 0x0000d800
[ 20.073853] usb usb5: configuration #1 chosen from 1 choice
[ 20.073935] hub 5-0:1.0: USB hub found
[ 20.073993] hub 5-0:1.0: 2 ports detected
[ 20.177392] ACPI: PCI Interrupt 0000:00:0a.2[C] -> GSI 16 (level, low) -> IRQ 19
[ 20.177518] ehci_hcd 0000:00:0a.2: EHCI Host Controller
[ 20.177607] ehci_hcd 0000:00:0a.2: new USB bus registered, assigned bus number 6
[ 20.177727] ehci_hcd 0000:00:0a.2: irq 19, io mem 0xeb023000
[ 20.189081] ehci_hcd 0000:00:0a.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 20.189310] usb usb6: configuration #1 chosen from 1 choice
[ 20.189398] hub 6-0:1.0: USB hub found
[ 20.189463] hub 6-0:1.0: 4 ports detected
[ 20.293114] ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 18
[ 20.293282] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 20.293366] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 7
[ 20.293480] ehci_hcd 0000:00:10.4: irq 18, io mem 0xeb025000
[ 20.305026] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 20.305286] usb usb7: configuration #1 chosen from 1 choice
[ 20.305373] hub 7-0:1.0: USB hub found
[ 20.305435] hub 7-0:1.0: 6 ports detected
[ 20.409167] ACPI: PCI Interrupt 0000:00:0a.3[A] -> GSI 18 (level, low) -> IRQ 16
[ 20.462043] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16] MMIO=[eb024000-eb0247ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 20.482971] 8139cp 0000:00:13.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[ 20.483049] 8139cp 0000:00:13.0: Try the "8139too" driver instead.
[ 20.485836] 8139too Fast Ethernet driver 0.9.28
[ 20.485952] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 18 (level, low) -> IRQ 16
[ 20.486544] eth0: RealTek RTL8139 at 0xe000, 00:0d:61:a9:b2:7b, IRQ 16
[ 20.486601] eth0: Identified 8139 chip type 'RTL-8101'
[ 20.490494] pata_via 0000:00:0f.0: version 0.3.3
[ 20.490833] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
[ 20.490897] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[ 20.490959] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 20
[ 20.491976] scsi0 : pata_via
[ 20.492756] scsi1 : pata_via
[ 20.494448] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xcc00 irq 14
[ 20.494507] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xcc08 irq 15
[ 20.688929] ata1.00: HPA unlocked: 160080319 -> 160086528, native 160086528
[ 20.688999] ata1.00: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133
[ 20.689055] ata1.00: 160086528 sectors, multi 16: LBA
[ 21.611783] usb 3-2: new full speed USB device using uhci_hcd and address 2
[ 21.751774] ieee1394: Host added: ID:BUS[0-00:1023] GUID[2000000004002367]
[ 21.775575] usb 3-2: configuration #1 chosen from 1 choice
[ 22.846982] ata1.01: HPA unlocked: 80291135 -> 80293248, native 80293248
[ 22.847050] ata1.01: ATA-7: Maxtor 6E040L0, NAR61HA0, max UDMA/133
[ 22.847107] ata1.01: 80293248 sectors, multi 16: LBA
[ 22.863007] ata1.00: configured for UDMA/133
[ 22.879001] ata1.01: configured for UDMA/133
[ 23.546382] ata2.00: ATAPI: ASUS CD-S520/A4, 1.41, max UDMA/33
[ 23.546457] ata2.01: ATAPI: LITE-ON DVDRW SHW-16H5S, LS0W, max UDMA/66
[ 23.546522] ata2.01: limited to UDMA/33 due to 40-wire cable
[ 23.718110] ata2.00: configured for UDMA/33
[ 23.905910] ata2.01: configured for UDMA/33
[ 23.906105] scsi 0:0:0:0: Direct-Access ATA Maxtor 6Y080L0 YAR4 PQ: 0 ANSI: 5
[ 23.906629] scsi 0:0:1:0: Direct-Access ATA Maxtor 6E040L0 NAR6 PQ: 0 ANSI: 5
[ 23.907102] scsi 1:0:0:0: CD-ROM ASUS CD-S520/A4 1.41 PQ: 0 ANSI: 5
[ 23.908015] scsi 1:0:1:0: CD-ROM LITE-ON DVDRW SHW-16H5S LS0W PQ: 0 ANSI: 5
[ 23.923258] Driver 'sd' needs updating - please use bus_type methods
[ 23.923435] sd 0:0:0:0: [sda] 160086528 512-byte hardware sectors (81964 MB)
[ 23.923509] sd 0:0:0:0: [sda] Write Protect is off
[ 23.923566] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 23.923589] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 23.923715] sd 0:0:0:0: [sda] 160086528 512-byte hardware sectors (81964 MB)
[ 23.923783] sd 0:0:0:0: [sda] Write Protect is off
[ 23.923838] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 23.923858] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 23.923930] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 23.964957] sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[ 24.022212] sd 0:0:0:0: [sda] Attached SCSI disk
[ 24.023385] sd 0:0:1:0: [sdb] 80293248 512-byte hardware sectors (41110 MB)
[ 24.023458] sd 0:0:1:0: [sdb] Write Protect is off
[ 24.023514] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 24.023537] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 24.023658] sd 0:0:1:0: [sdb] 80293248 512-byte hardware sectors (41110 MB)
[ 24.023726] sd 0:0:1:0: [sdb] Write Protect is off
[ 24.023781] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 24.023801] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 24.023873] sdb: sdb1 sdb2
[ 24.042751] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 24.053218] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 24.053312] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 24.053385] sr 1:0:0:0: Attached scsi generic sg2 type 5
[ 24.053458] scsi 1:0:1:0: Attached scsi generic sg3 type 5
[ 24.055717] sr0: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
[ 24.055785] Uniform CD-ROM driver Revision: 3.20
[ 24.055911] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 24.061832] sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 24.061965] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 24.950713] Attempting manual resume
[ 24.950770] swsusp: Resume From Partition 8:7
[ 24.950772] PM: Checking swsusp image.
[ 24.951099] PM: Resume from disk failed.
[ 24.986166] kjournald starting. Commit interval 5 seconds
[ 24.986246] EXT3-fs: mounted filesystem with ordered data mode.
[ 35.871070] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 36.348096] acx: Loaded combined PCI/USB driver, firmware_ver=default
[ 36.348162] acx: compiled to use 32bit I/O access. I/O timing issues might occur, such as non-working firmware upload. Report them
[ 36.348307] ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 17 (level, low) -> IRQ 21
[ 36.348435] acx: found ACX111-based wireless network card at 0000:00:0d.0, irq:21, phymem1:0xEB020000, phymem2:0xEB000000, mem1:0xf0950000, mem1_size:8192, mem2:0xf0a40000, mem2_size:131072
[ 36.349518] acx: loading firmware for acx1111 chipset with radio ID 16
[ 36.398535] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 36.578324] Linux agpgart interface v0.102
[ 36.643531] Linux video capture interface: v2.00
[ 36.705186] input: Power Button (FF) as /devices/virtual/input/input3
[ 36.732943] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
[ 36.734360] ACPI: Power Button (FF) [PWRF]
[ 36.734489] input: Power Button (CM) as /devices/virtual/input/input5
[ 36.766193] ACPI: Power Button (CM) [PWRB]
[ 36.796686] parport_pc 00:0b: reported by Plug and Play ACPI
[ 36.796794] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 37.957738] saa7130/34: v4l2 driver version 0.2.14 loaded
[ 39.459759] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found. (TV8532)
[ 39.557563] usbcore: registered new interface driver gspca
[ 39.557630] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: gspca driver 01.00.20 registered
[ 41.314492] NVS_vendor_offs:01CD probe_delay:200 eof_memory:1114112
[ 41.314558] CCAModes:04 Diversity:01 ShortPreOpt:01 PBCC:01 ChanAgil:00 PHY:05 Temp:01
[ 41.314626] AntennaID:00 Len:02 Data:01 02
[ 41.314790] PowerLevelID:01 Len:02 Data:001E 000A
[ 41.314955] DataRatesID:02 Len:05 Data:02 04 11 22 44
[ 41.315231] DomainID:03 Len:06 Data:41 20 30 31 32 40
[ 41.315543] ProductID:04 Len:09 Data:TI ACX100
[ 41.315597] ManufacturerID:05 Len:07 Data:TI Test
[ 41.373978] acx: === chipset TNETW1130, radio type 0x16 (Radia), form factor 0x01 ((mini-)PCI / CardBus), EEPROM version 0x05: uploaded firmware 'Rev 1.2.1.34' ===
[ 41.374382] acx v0.3.36: net device wlan0, driver compiled against wireless extensions 22 and Linux 2.6.24-16-generic
[ 41.374510] usbcore: registered new interface driver acx_usb
[ 41.374788] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 41.374940] agpgart: Detected VIA KT400/KT400A/KT600 chipset
[ 41.383387] agpgart: AGP aperture is 128M @ 0xe0000000
[ 41.383955] ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 16 (level, low) -> IRQ 19
[ 41.384066] saa7133[0]: found at 0000:00:0c.0, rev: 240, irq: 19, latency: 32, mmio: 0xeb022000
[ 41.384140] saa7133[0]: subsystem: 1421:0350, board: ADS Tech Instant TV (saa7135) [card=58,autodetected]
[ 41.384216] saa7133[0]: board init: gpio is 7f
[ 41.517852] saa7133[0]: i2c eeprom 00: 21 14 50 03 10 28 ff ff ff ff ff ff ff ff ff ff
[ 41.518559] saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 41.519256] saa7133[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 41.519953] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 41.520649] saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 41.521346] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 41.522048] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 41.522745] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 41.665709] tuner 0-004b: chip found @ 0x96 (saa7133[0])
[ 41.713662] tda8290 0-004b: setting tuner address to 61
[ 41.817569] tuner 0-004b: type set to tda8290+75
[ 41.865525] tda8290 0-004b: setting tuner address to 61
[ 41.969431] tuner 0-004b: type set to tda8290+75
[ 41.972231] saa7133[0]: registered device video1 [v4l2]
[ 41.972307] saa7133[0]: registered device vbi0
[ 41.973099] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
[ 41.973157] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[ 41.973219] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 22
[ 41.973702] PCI: Setting latency timer of device 0000:00:11.5 to 64
[ 42.000162] saa7134 ALSA driver for DMA sound loaded
[ 42.000259] saa7133[0]/alsa: saa7133[0] at 0xeb022000 irq 19 registered as card -2
[ 42.000455] BUG: unable to handle kernel NULL pointer dereference at virtual address 00000002
[ 42.000563] printing eip: f0b1b745 *pde = 00000000
[ 42.000693] Oops: 0000 [#1] SMP
[ 42.000819] Modules linked in: saa7134_alsa tuner tea5767 tda8290 tuner_simple mt20xx tea5761 snd_via82xx gameport snd_ac97_codec gspca ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_page_alloc snd_mpu401 snd_mpu401_uart snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq saa7134 snd_timer snd_seq_device serio_raw compat_ioctl32 videobuf_dma_sg videobuf_core ir_kbd_i2c snd ir_common button i2c_viapro videodev v4l2_common v4l1_compat via_agp agpgart i2c_core soundcore shpchp pci_hotplug acx parport_pc parport evdev psmouse pcspkr ext3 jbd mbcache sg sr_mod cdrom sd_mod pata_acpi pata_via 8139too floppy ata_generic 8139cp mii libata ohci1394 scsi_mod ehci_hcd uhci_hcd ieee1394 usbcore thermal processor fan fbcon tileblit font bitblit softcursor fuse
[ 42.004080]
[ 42.004130] Pid: 4200, comm: modprobe Not tainted (2.6.24-16-generic #1)
[ 42.004187] EIP: 0060:[<f0b1b745>] EFLAGS: 00010246 CPU: 0
[ 42.004265] EIP is at snd_pcm_timer_init+0x25/0x170 [snd_pcm]
[ 42.004321] EAX: 00000002 EBX: ee480400 ECX: eebebddc EDX: 00000000
[ 42.004377] ESI: ee4805d4 EDI: efb3ac34 EBP: 00000018 ESP: eebebdc4
[ 42.004433] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[ 42.004489] Process modprobe (pid: 4200, ti=eebea000 task=ee15a000 task.ti=eebea000)
[ 42.004547] Stack: 00000000 00000001 efb3a400 00000000 efb3a400 00000000 00000003 00000000
[ 42.004947] ee480400 00000018 f0a7320c 00000000 ee4805d4 efb3ac00 f0b1367f f0b2492c
[ 42.005348] efb3ac00 eebebe18 efb3aa00 00000001 f0b1c5f4 436d6370 63304432 ffffff00
[ 42.005749] Call Trace:
[ 42.005853] [<f0a7320c>] snd_add_device_sysfs_file+0x3c/0x70 [snd]
[ 42.005966] [<f0b1367f>] snd_pcm_dev_register+0xef/0x200 [snd_pcm]
[ 42.006075] [<f0a77e4d>] snd_device_register_all+0x2d/0x60 [snd]
[ 42.006178] [<f0a73a1e>] snd_card_register+0x1e/0x320 [snd]
[ 42.006284] [<f0afa31a>] alsa_device_init+0x23a/0x280 [saa7134_alsa]
[ 42.006389] [<f0afa3cb>] saa7134_alsa_init+0x6b/0xc0 [saa7134_alsa]
[ 42.006486] [<c01506b6>] sys_init_module+0x126/0x19c0
[ 42.006610] [<f0b1ba80>] snd_pcm_format_width+0x0/0x20 [snd_pcm]
[ 42.006720] [<c01043c2>] sysenter_past_esp+0x6b/0xa9
[ 42.006825] =======================
[ 42.006877] Code: 5b c3 8d 74 26 00 56 89 c6 53 83 ec 30 8b 56 30 c7 44 24 1c 00 00 00 00 8d 4c 24 18 c7 44 24 18 03 00 00 00 8b 18 83 e2 01 8b 03 <8b> 00 89 44 24 20 8b 43 0c 89 44 24 24 8b 46 0c 01 c0 09 c2 8d
[ 42.009374] EIP: [<f0b1b745>] snd_pcm_timer_init+0x25/0x170 [snd_pcm] SS:ESP 0068:eebebdc4
[ 42.009544] ---[ end trace 6aea6e97f5391456 ]---
[ 142.655293] atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
[ 142.655371] atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
[ 146.470299] No dock devices found.
[ 147.577541] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 147.577607] apm: overridden by ACPI.
[ 147.769662] lp0: using parport0 (interrupt-driven).
[ 147.791140] ppdev: user-space parallel port driver
[ 148.605320] BUG: unable to handle kernel NULL pointer dereference at virtual address 00000002
[ 148.605455] printing eip: f0b15c7f *pde = 00000000
[ 148.605586] Oops: 0000 [#2] SMP
[ 148.605713] Modules linked in: ppdev lp cpufreq_stats cpufreq_powersave cpufreq_conservative cpufreq_userspace cpufreq_ondemand freq_table video output container dock ac sbs sbshc battery saa7134_alsa tuner tea5767 tda8290 tuner_simple mt20xx tea5761 snd_via82xx gameport snd_ac97_codec gspca ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_page_alloc snd_mpu401 snd_mpu401_uart snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq saa7134 snd_timer snd_seq_device serio_raw compat_ioctl32 videobuf_dma_sg videobuf_core ir_kbd_i2c snd ir_common button i2c_viapro videodev v4l2_common v4l1_compat via_agp agpgart i2c_core soundcore shpchp pci_hotplug acx parport_pc parport evdev psmouse pcspkr ext3 jbd mbcache sg sr_mod cdrom sd_mod pata_acpi pata_via 8139too floppy ata_generic 8139cp mii libata ohci1394 scsi_mod ehci_hcd uhci_hcd ieee1394 usbcore thermal processor fan fbcon tileblit font bitblit softcursor fuse
[ 148.609603]
[ 148.609655] Pid: 4855, comm: hald Tainted: G D (2.6.24-16-generic #1)
[ 148.609713] EIP: 0060:[<f0b15c7f>] EFLAGS: 00010246 CPU: 0
[ 148.609790] EIP is at snd_pcm_info+0x2f/0x110 [snd_pcm]
[ 148.609845] EAX: 00000002 EBX: ee480400 ECX: 00000040 EDX: ee076600
[ 148.609901] ESI: 00000001 EDI: ee076720 EBP: ee4805d4 ESP: eec4fe98
[ 148.609958] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[ 148.610013] Process hald (pid: 4855, ti=eec4e000 task=eec46b40 task.ti=eec4e000)
[ 148.610071] Stack: ee076600 ee076600 ee8aa040 ee4805d4 ee581ab0 f0b12d34 000040d0 df821300
[ 148.610472] ee8aa040 df821330 df821300 00000000 f0a754a4 eec14f00 01c4ff30 ffffffff
[ 148.610873] dfbf7700 00000000 ef74b430 eec14f00 c01c33e6 eec14f00 ef74b430 00000000
[ 148.611274] Call Trace:
[ 148.611376] [<f0b12d34>] snd_pcm_proc_info_read+0x34/0x180 [snd_pcm]
[ 148.611483] [<f0a754a4>] snd_info_entry_open+0x114/0x280 [snd]
[ 148.611599] [<c01c33e6>] proc_reg_open+0x46/0x70
[ 148.611698] [<c018b41f>] __dentry_open+0xbf/0x1c0
[ 148.611800] [<c018b5d5>] nameidata_to_filp+0x35/0x40
[ 148.611893] [<c01c33a0>] proc_reg_open+0x0/0x70
[ 148.611986] [<c018b630>] do_filp_open+0x50/0x60
[ 148.612081] [<c011faab>] check_pgt_cache+0x1b/0x20
[ 148.612182] [<c018b2d2>] get_unused_fd_flags+0x52/0xd0
[ 148.612280] [<c018b68c>] do_sys_open+0x4c/0xe0
[ 148.612376] [<c018b75c>] sys_open+0x1c/0x20
[ 148.612468] [<c01043c2>] sysenter_past_esp+0x6b/0xa9
[ 148.612574] =======================
[ 148.612626] Code: 48 00 00 00 89 7c 24 0c 89 d7 89 6c 24 10 89 c5 89 5c 24 04 89 74 24 08 89 14 24 8b 18 8b 70 04 31 c0 f3 ab 8b 03 b9 40 00 00 00 <8b> 00 89 42 0c 8b 43 0c 89 02 8b 45 30 89 42 08 8b 45 0c 89 42
[ 148.615124] EIP: [<f0b15c7f>] snd_pcm_info+0x2f/0x110 [snd_pcm] SS:ESP 0068:eec4fe98
[ 148.615284] ---[ end trace 6aea6e97f5391456 ]---
[ 148.731986] Bluetooth: Core ver 2.11
[ 148.732379] NET: Registered protocol family 31
[ 148.732434] Bluetooth: HCI device and connection manager initialized
[ 148.732493] Bluetooth: HCI socket layer initialized
[ 148.757232] Bluetooth: L2CAP ver 2.9
[ 148.757293] Bluetooth: L2CAP socket layer initialized
[ 148.815588] Bluetooth: RFCOMM socket layer initialized
[ 148.815667] Bluetooth: RFCOMM TTY layer initialized
[ 148.815721] Bluetooth: RFCOMM ver 1.8
[ 152.855282] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 152.855302] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 166.672335] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 166.672406] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 174.106545] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 174.106598] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 184.926373] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 184.926426] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 196.270373] usb 7-1: new high speed USB device using ehci_hcd and address 3
[ 196.415604] usb 7-1: configuration #1 chosen from 1 choice
[ 196.543353] usbcore: registered new interface driver libusual
[ 196.566042] Initializing USB Mass Storage driver...
[ 196.575632] scsi2 : SCSI emulation for USB Mass Storage devices
[ 196.576899] usbcore: registered new interface driver usb-storage
[ 196.576954] USB Mass Storage support registered.
[ 196.577129] usb-storage: device found at 3
[ 196.577184] usb-storage: waiting for device to settle before scanning
[ 201.577590] usb-storage: device scan complete
[ 201.578106] scsi 2:0:0:0: Direct-Access Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 0 CCS
[ 201.969108] sd 2:0:0:0: [sdc] 985088 512-byte hardware sectors (504 MB)
[ 201.969729] sd 2:0:0:0: [sdc] Write Protect is off
[ 201.969786] sd 2:0:0:0: [sdc] Mode Sense: 23 00 00 00
[ 201.969844] sd 2:0:0:0: [sdc] Assuming drive cache: write through
[ 201.972475] sd 2:0:0:0: [sdc] 985088 512-byte hardware sectors (504 MB)
[ 201.973100] sd 2:0:0:0: [sdc] Write Protect is off
[ 201.973156] sd 2:0:0:0: [sdc] Mode Sense: 23 00 00 00
[ 201.973211] sd 2:0:0:0: [sdc] Assuming drive cache: write through
[ 201.973276] sdc: sdc1
[ 201.974390] sd 2:0:0:0: [sdc] Attached SCSI removable disk
[ 201.974495] sd 2:0:0:0: Attached scsi generic sg4 type 0
[ 206.491771] atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
[ 206.491849] atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
[ 213.207660] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 213.207730] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 218.912950] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 218.913023] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 225.817910] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 225.817984] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 233.212231] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 233.212305] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 239.394959] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 239.395029] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 249.245267] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 249.245339] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 255.796669] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 255.796742] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 264.079898] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 264.079952] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 267.668661] atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
[ 267.668712] atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
[ 275.583406] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 275.583479] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 281.644083] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 281.644157] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.Pour résumer brièvement ma configuration :
Processeur AMD Athlon XP 2600+, chipset Via KT600, carte PCI TV (puce Philipps saa_7134), carte PCI WiFi (puce Texas ACX), carte son intégré à ma carte mère (module snd_via82xx).
Je ne sais pas du tout qui pourrait tout me faire planter.
Un feedback sur Launch Pad ?
Connu aussi sous le pseudo de Longhorn
Dell Studio 1537
Ubuntu Linux 10.04 LTS 64 Bits - Gnome 2.30 - KDE 4.4
Hors ligne
#2 Le 13/04/2008, à 23:28
- FireLight
Re : Bug Kernel 2.6.24-16
Après recherche sur LaunchPad, il s'avère que c'est saa7134 qui fait tout planter, car je ne suis pas le seul.
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/216659
Connu aussi sous le pseudo de Longhorn
Dell Studio 1537
Ubuntu Linux 10.04 LTS 64 Bits - Gnome 2.30 - KDE 4.4
Hors ligne
#3 Le 13/04/2008, à 23:36
- lafayette
Re : Bug Kernel 2.6.24-16
Tiens j'ai également un tuner tv avermedia et donc le module saa7134 (je ne sais même si il fonctionne car kaffeine ne le trouve pas) et le noyau 2.6.24-16 ne fonctionne pas bien du tout non plus (voir mon poste : pb Hal).
Hors ligne
#4 Le 14/04/2008, à 11:31
- FireLight
Re : Bug Kernel 2.6.24-16
Oui, je viens de voir ça. Un blacklist, et hop, ça marche. Enfin, presque, quelques petits problèmes avec mon WiFi parfois, mais ça, c'est plus de l'affaire du noyau 
Connu aussi sous le pseudo de Longhorn
Dell Studio 1537
Ubuntu Linux 10.04 LTS 64 Bits - Gnome 2.30 - KDE 4.4
Hors ligne
Pages : 1