Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

Pages : 1

#1 Le 28/06/2014, à 10:18

Wizix

[Résolu] Problème d'affichage suite à tentative de dual screen

Bonjour tout le monde,

J'ai, ce matin, ré-essayé de brancher mon deuxième écran sur mon ordinateur portable. Mais toujours le même problème, l'écran de mon ordinateur devient noir et me ramène à la page de connexion pour les sessions. Après être connecté, un message apparaît comme quoi ma session n'a même pas duré 10 secondes et patati et patata. J'ai donc redémarré mon ordinateur via le tty.

Arrivé sur l'écran de connexion de session, je rentre mon mot de passe et me connecte. Écran noir. 30 secondes plus tard, l'affichage graphique apparait enfin ! Mais là j'ai dû me retenir de vomir... Mon thème Numix fonctionne, les icônes et les contrôles de fenêtres ne sont pas ceux que j'avais définit. Je les remets comme je les avais dans les réglages et redémarre. L'écran noir est toujours aussi long, et les modifications ne sont pas prises en compte.

J'ai ré-installé le serveur X (après multiple recherche, car j'ai jamais rien compris à ce truc) : 

apt-get remove --purge xserver-xorg
apt-get install xserver-xorg
dpkg-reconfigure xserver-xorg
apt-get install mdm

J'ai redémarré, écran noir toujours aussi long, et rien n'a changé.. Déception. Je suis donc rendu ici à vous écrire ce post avec l'espoir d'éviter une réinstallation du système. Voici les différents fichiers demandé :

xorg.conf : 

Section "ServerLayout"
    Identifier "layout"
    Screen 0 "nvidia"
    Inactive "intel"
EndSection

Section "Device"
    Identifier "intel"
    Driver "modesetting"
    BusID "PCI:0@0:2:0"
EndSection

Section "Screen"
    Identifier "intel"
    Device "intel"
EndSection

Section "Device"
    Identifier "nvidia"
    Driver "nvidia"
    BusID "PCI:1@0:0:0"
    Option "ConstrainCursor" "off"
EndSection

Section "Screen"
    Identifier "nvidia"
    Device "nvidia"
    Option "AllowEmptyInitialConfiguration" "on"
    Option "IgnoreDisplayDevices" "CRT"
EndSection

Xorg.0.log : 

[     6.733] 
X.Org X Server 1.15.1
Release Date: 2014-04-13
[     6.733] X Protocol Version 11, Revision 0
[     6.733] Build Operating System: Linux 3.2.0-37-generic x86_64 Ubuntu
[     6.733] Current Operating System: Linux Jarvis 3.13.0-24-generic #47-Ubuntu SMP Fri May 2 23:30:00 UTC 2014 x86_64
[     6.733] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-24-generic root=UUID=96963990-7cdf-4b6a-84b0-eeeffce91bf1 ro quiet splash rcutree.rcu_idle_gp_delay=1 vt.handoff=7
[     6.733] Build Date: 16 April 2014  01:36:29PM
[     6.733] xorg-server 2:1.15.1-0ubuntu2 (For technical support please see http://www.ubuntu.com/support) 
[     6.733] Current version of pixman: 0.30.2
[     6.733] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[     6.733] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     6.733] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jun 28 09:47:45 2014
[     6.734] (==) Using config file: "/etc/X11/xorg.conf"
[     6.734] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     6.735] (==) ServerLayout "layout"
[     6.735] (**) |-->Screen "nvidia" (0)
[     6.735] (**) |   |-->Monitor "<default monitor>"
[     6.735] (**) |   |-->Device "nvidia"
[     6.735] (==) No monitor specified for screen "nvidia".
	Using a default monitor configuration.
[     6.735] (**) |-->Inactive Device "intel"
[     6.735] (==) Automatically adding devices
[     6.735] (==) Automatically enabling devices
[     6.735] (==) Automatically adding GPU devices
[     6.735] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[     6.735] 	Entry deleted from font path.
[     6.735] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[     6.735] 	Entry deleted from font path.
[     6.736] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[     6.736] 	Entry deleted from font path.
[     6.736] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[     6.736] 	Entry deleted from font path.
[     6.736] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[     6.736] 	Entry deleted from font path.
[     6.736] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[     6.736] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[     6.736] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[     6.736] (II) Loader magic: 0x7feae86f2d60
[     6.736] (II) Module ABI versions:
[     6.736] 	X.Org ANSI C Emulation: 0.4
[     6.736] 	X.Org Video Driver: 15.0
[     6.736] 	X.Org XInput driver : 20.0
[     6.736] 	X.Org Server Extension : 8.0
[     6.736] (II) xfree86: Adding drm device (/dev/dri/card1)
[     6.737] (II) xfree86: Adding drm device (/dev/dri/card0)
[     6.739] (--) PCI:*(0:0:2:0) 8086:0166:1043:1587 rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[     6.739] (--) PCI: (0:1:0:0) 10de:0fdf:1043:1587 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[     6.739] Initializing built-in extension Generic Event Extension
[     6.739] Initializing built-in extension SHAPE
[     6.739] Initializing built-in extension MIT-SHM
[     6.739] Initializing built-in extension XInputExtension
[     6.739] Initializing built-in extension XTEST
[     6.739] Initializing built-in extension BIG-REQUESTS
[     6.739] Initializing built-in extension SYNC
[     6.739] Initializing built-in extension XKEYBOARD
[     6.739] Initializing built-in extension XC-MISC
[     6.739] Initializing built-in extension SECURITY
[     6.739] Initializing built-in extension XINERAMA
[     6.739] Initializing built-in extension XFIXES
[     6.739] Initializing built-in extension RENDER
[     6.739] Initializing built-in extension RANDR
[     6.739] Initializing built-in extension COMPOSITE
[     6.739] Initializing built-in extension DAMAGE
[     6.739] Initializing built-in extension MIT-SCREEN-SAVER
[     6.739] Initializing built-in extension DOUBLE-BUFFER
[     6.739] Initializing built-in extension RECORD
[     6.739] Initializing built-in extension DPMS
[     6.739] Initializing built-in extension Present
[     6.739] Initializing built-in extension DRI3
[     6.739] Initializing built-in extension X-Resource
[     6.739] Initializing built-in extension XVideo
[     6.739] Initializing built-in extension XVideo-MotionCompensation
[     6.739] Initializing built-in extension SELinux
[     6.739] Initializing built-in extension XFree86-VidModeExtension
[     6.739] Initializing built-in extension XFree86-DGA
[     6.739] Initializing built-in extension XFree86-DRI
[     6.739] Initializing built-in extension DRI2
[     6.739] (WW) "glamoregl" will not be loaded unless you've specified it to be loaded elsewhere.
[     6.739] (II) "glx" will be loaded by default.
[     6.739] (WW) "xmir" is not to be loaded by default. Skipping.
[     6.739] (II) LoadModule: "glx"
[     6.739] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so
[     6.815] (II) Module glx: vendor="NVIDIA Corporation"
[     6.815] 	compiled for 4.0.2, module version = 1.0.0
[     6.815] 	Module class: X.Org Server Extension
[     6.815] (II) NVIDIA GLX Module  331.38  Wed Jan  8 19:10:17 PST 2014
[     6.815] Loading extension GLX
[     6.815] (II) LoadModule: "nvidia"
[     6.815] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so
[     6.816] (II) Module nvidia: vendor="NVIDIA Corporation"
[     6.816] 	compiled for 4.0.2, module version = 1.0.0
[     6.816] 	Module class: X.Org Video Driver
[     6.816] (II) LoadModule: "modesetting"
[     6.818] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     6.818] (II) Module modesetting: vendor="X.Org Foundation"
[     6.818] 	compiled for 1.15.0, module version = 0.8.1
[     6.818] 	Module class: X.Org Video Driver
[     6.818] 	ABI class: X.Org Video Driver, version 15.0
[     6.818] (II) NVIDIA dlloader X Driver  331.38  Wed Jan  8 18:51:00 PST 2014
[     6.818] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[     6.818] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     6.818] (++) using VT number 8

[     6.829] (II) Loading sub module "fb"
[     6.829] (II) LoadModule: "fb"
[     6.829] (II) Loading /usr/lib/xorg/modules/libfb.so
[     6.829] (II) Module fb: vendor="X.Org Foundation"
[     6.829] 	compiled for 1.15.1, module version = 1.0.0
[     6.829] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     6.829] (WW) Unresolved symbol: fbGetGCPrivateKey
[     6.829] (II) Loading sub module "wfb"
[     6.829] (II) LoadModule: "wfb"
[     6.830] (II) Loading /usr/lib/xorg/modules/libwfb.so
[     6.830] (II) Module wfb: vendor="X.Org Foundation"
[     6.830] 	compiled for 1.15.1, module version = 1.0.0
[     6.830] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     6.830] (II) Loading sub module "ramdac"
[     6.830] (II) LoadModule: "ramdac"
[     6.830] (II) Module "ramdac" already built-in
[     6.831] (II) modesetting(G0): using drv /dev/dri/card0
[     6.831] (II) NVIDIA(0): Creating default Display subsection in Screen section
	"nvidia" for depth/fbbpp 24/32
[     6.831] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[     6.831] (==) NVIDIA(0): RGB weight 888
[     6.832] (==) NVIDIA(0): Default visual is TrueColor
[     6.832] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[     6.832] (**) NVIDIA(0): Option "ConstrainCursor" "off"
[     6.832] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration" "on"
[     6.832] (**) NVIDIA(0): Option "IgnoreDisplayDevices" "CRT"
[     6.832] (**) NVIDIA(0): Enabling 2D acceleration
[     8.084] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
[     8.086] (II) NVIDIA(0): NVIDIA GPU GeForce GT 740M (GK107) at PCI:1:0:0 (GPU-0)
[     8.086] (--) NVIDIA(0): Memory: 2097152 kBytes
[     8.086] (--) NVIDIA(0): VideoBIOS: 80.07.95.00.11
[     8.086] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[     8.086] (--) NVIDIA(0): Valid display device(s) on GeForce GT 740M at PCI:1:0:0
[     8.086] (--) NVIDIA(0):     none
[     8.087] (II) NVIDIA(0): Validated MetaModes:
[     8.087] (II) NVIDIA(0):     "NULL"
[     8.087] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[     8.087] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[     8.087] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[     8.087] (==) modesetting(G0): Depth 24, (==) framebuffer bpp 32
[     8.087] (==) modesetting(G0): RGB weight 888
[     8.087] (==) modesetting(G0): Default visual is TrueColor
[     8.087] (II) modesetting(G0): ShadowFB: preferred YES, enabled YES
[     8.087] (II) modesetting(G0): Output LVDS-1-0 has no monitor section
[     8.088] (II) modesetting(G0): Output VGA-1-0 has no monitor section
[     8.089] (II) modesetting(G0): Output HDMI-1-0 has no monitor section
[     8.089] (II) modesetting(G0): Output DisplayPort-1-0 has no monitor section
[     8.089] (II) modesetting(G0): EDID for output LVDS-1-0
[     8.089] (II) modesetting(G0): Manufacturer: SEC  Model: 334a  Serial#: 0
[     8.089] (II) modesetting(G0): Year: 2011  Week: 0
[     8.089] (II) modesetting(G0): EDID Version: 1.3
[     8.089] (II) modesetting(G0): Digital Display Input
[     8.089] (II) modesetting(G0): Max Image Size [cm]: horiz.: 34  vert.: 19
[     8.089] (II) modesetting(G0): Gamma: 2.20
[     8.089] (II) modesetting(G0): No DPMS capabilities specified
[     8.089] (II) modesetting(G0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[     8.089] (II) modesetting(G0): First detailed timing is preferred mode
[     8.089] (II) modesetting(G0): redX: 0.620 redY: 0.355   greenX: 0.300 greenY: 0.580
[     8.089] (II) modesetting(G0): blueX: 0.150 blueY: 0.090   whiteX: 0.313 whiteY: 0.329
[     8.089] (II) modesetting(G0): Manufacturer's mask: 0
[     8.089] (II) modesetting(G0): Supported detailed timing:
[     8.090] (II) modesetting(G0): clock: 78.0 MHz   Image Size:  344 x 194 mm
[     8.090] (II) modesetting(G0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1646 h_border: 0
[     8.090] (II) modesetting(G0): v_active: 768  v_sync: 770  v_sync_end 775 v_blanking: 790 v_border: 0
[     8.090] (II) modesetting(G0): Unknown vendor-specific block f
[     8.090] (II) modesetting(G0):  SAMSUNG
[     8.090] (II) modesetting(G0):  156AT20-P01
[     8.090] (II) modesetting(G0): EDID (in hex):
[     8.090] (II) modesetting(G0): 	00ffffffffffff004ca34a3300000000
[     8.090] (II) modesetting(G0): 	00150103802213780ace859e5b4c9426
[     8.090] (II) modesetting(G0): 	17505400000001010101010101010101
[     8.090] (II) modesetting(G0): 	0101010101017d1e5618510016303020
[     8.090] (II) modesetting(G0): 	250058c2100000190000000f00000000
[     8.090] (II) modesetting(G0): 	00000000001eb4027400000000fe0053
[     8.090] (II) modesetting(G0): 	414d53554e470a2020202020000000fe
[     8.090] (II) modesetting(G0): 	00313536415432302d5030310a20001f
[     8.090] (II) modesetting(G0): Printing probed modes for output LVDS-1-0
[     8.090] (II) modesetting(G0): Modeline "1366x768"x60.0   78.05  1366 1414 1446 1646  768 770 775 790 -hsync -vsync (47.4 kHz eP)
[     8.090] (II) modesetting(G0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)
[     8.090] (II) modesetting(G0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)
[     8.090] (II) modesetting(G0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[     8.090] (II) modesetting(G0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[     8.090] (II) modesetting(G0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[     8.090] (II) modesetting(G0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[     8.090] (II) modesetting(G0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[     8.090] (II) modesetting(G0): Modeline "960x600"x120.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[     8.090] (II) modesetting(G0): Modeline "960x540"x120.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[     8.091] (II) modesetting(G0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[     8.091] (II) modesetting(G0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[     8.091] (II) modesetting(G0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[     8.091] (II) modesetting(G0): Modeline "840x525"x120.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[     8.091] (II) modesetting(G0): Modeline "840x525"x119.8   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[     8.091] (II) modesetting(G0): Modeline "800x512"x120.3   51.56  800 800 828 832  512 512 514 515 doublescan +hsync +vsync (62.0 kHz d)
[     8.091] (II) modesetting(G0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[     8.091] (II) modesetting(G0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[     8.091] (II) modesetting(G0): Modeline "720x450"x119.8   53.25  720 760 836 952  450 451 454 467 doublescan -hsync +vsync (55.9 kHz d)
[     8.091] (II) modesetting(G0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[     8.091] (II) modesetting(G0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[     8.091] (II) modesetting(G0): Modeline "680x384"x119.6   42.38  680 716 784 888  384 385 390 399 doublescan -hsync +vsync (47.7 kHz d)
[     8.091] (II) modesetting(G0): Modeline "680x384"x119.9   36.00  680 704 720 760  384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)
[     8.091] (II) modesetting(G0): Modeline "576x432"x120.1   40.81  576 608 668 760  432 432 434 447 doublescan -hsync +vsync (53.7 kHz d)
[     8.091] (II) modesetting(G0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[     8.091] (II) modesetting(G0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[     8.091] (II) modesetting(G0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[     8.091] (II) modesetting(G0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[     8.092] (II) modesetting(G0): EDID for output VGA-1-0
[     8.093] (II) modesetting(G0): EDID for output HDMI-1-0
[     8.093] (II) modesetting(G0): EDID for output DisplayPort-1-0
[     8.093] (II) modesetting(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[     8.093] (==) modesetting(G0): DPI set to (96, 96)
[     8.093] (II) Loading sub module "fb"
[     8.093] (II) LoadModule: "fb"
[     8.094] (II) Loading /usr/lib/xorg/modules/libfb.so
[     8.094] (II) Module fb: vendor="X.Org Foundation"
[     8.094] 	compiled for 1.15.1, module version = 1.0.0
[     8.094] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     8.094] (II) Loading sub module "shadow"
[     8.094] (II) LoadModule: "shadow"
[     8.095] (II) Loading /usr/lib/xorg/modules/libshadow.so
[     8.095] (II) Module shadow: vendor="X.Org Foundation"
[     8.095] 	compiled for 1.15.1, module version = 1.1.0
[     8.095] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     8.095] (--) Depth 24 pixmap format is 32 bpp
[     8.095] (==) modesetting(G0): Backing store enabled
[     8.095] (==) modesetting(G0): Silken mouse enabled
[     8.095] (II) modesetting(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[     8.096] (==) modesetting(G0): DPMS enabled
[     8.096] (WW) modesetting(G0): Option "AllowEmptyInitialConfiguration" is not used
[     8.096] (WW) modesetting(G0): Option "IgnoreDisplayDevices" is not used
[     8.520] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[     8.521] (II) NVIDIA:     access.
[     8.528] (II) NVIDIA(0): Setting mode "NULL"
[     8.528] (EE) NVIDIA(0): Failed to initiate mode change.
[     8.528] (EE) NVIDIA(0): Failed to complete mode change
[     8.541] (II) NVIDIA(0): Built-in logo is bigger than the screen.
[     8.542] Loading extension NV-GLX
[     8.545] (==) NVIDIA(0): Disabling shared memory pixmaps
[     8.545] (==) NVIDIA(0): Backing store enabled
[     8.545] (==) NVIDIA(0): Silken mouse enabled
[     8.545] (==) NVIDIA(0): DPMS enabled
[     8.545] Loading extension NV-CONTROL
[     8.546] (II) Loading sub module "dri2"
[     8.546] (II) LoadModule: "dri2"
[     8.546] (II) Module "dri2" already built-in
[     8.546] (II) NVIDIA(0): [DRI2] Setup complete
[     8.546] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[     8.546] (--) RandR disabled
[     8.550] (II) SELinux: Disabled on system
[     8.550] (II) Initializing extension GLX
[     8.551] (II) modesetting(G0): Damage tracking initialized
[     8.561] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[     8.563] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[     8.563] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     8.563] (II) LoadModule: "evdev"
[     8.564] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[     8.564] (II) Module evdev: vendor="X.Org Foundation"
[     8.564] 	compiled for 1.15.0, module version = 2.8.2
[     8.564] 	Module class: X.Org XInput Driver
[     8.564] 	ABI class: X.Org XInput driver, version 20.0
[     8.565] (II) Using input driver 'evdev' for 'Power Button'
[     8.565] (**) Power Button: always reports core events
[     8.565] (**) evdev: Power Button: Device: "/dev/input/event2"
[     8.565] (--) evdev: Power Button: Vendor 0 Product 0x1
[     8.565] (--) evdev: Power Button: Found keys
[     8.565] (II) evdev: Power Button: Configuring as keyboard
[     8.565] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[     8.565] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     8.565] (**) Option "xkb_rules" "evdev"
[     8.565] (**) Option "xkb_model" "pc105"
[     8.565] (**) Option "xkb_layout" "fr"
[     8.565] (**) Option "xkb_variant" "latin9"
[     8.566] (II) XKB: reuse xkmfile /var/lib/xkb/server-816A055A5FF7D63897839A4BDEDC3908551E49DA.xkm
[     8.567] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[     8.567] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[     8.567] (II) Using input driver 'evdev' for 'Video Bus'
[     8.567] (**) Video Bus: always reports core events
[     8.567] (**) evdev: Video Bus: Device: "/dev/input/event9"
[     8.567] (--) evdev: Video Bus: Vendor 0 Product 0x6
[     8.567] (--) evdev: Video Bus: Found keys
[     8.567] (II) evdev: Video Bus: Configuring as keyboard
[     8.567] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input16/event9"
[     8.567] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[     8.567] (**) Option "xkb_rules" "evdev"
[     8.567] (**) Option "xkb_model" "pc105"
[     8.567] (**) Option "xkb_layout" "fr"
[     8.567] (**) Option "xkb_variant" "latin9"
[     8.567] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[     8.567] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[     8.567] (II) Using input driver 'evdev' for 'Video Bus'
[     8.567] (**) Video Bus: always reports core events
[     8.567] (**) evdev: Video Bus: Device: "/dev/input/event7"
[     8.567] (--) evdev: Video Bus: Vendor 0 Product 0x6
[     8.567] (--) evdev: Video Bus: Found keys
[     8.567] (II) evdev: Video Bus: Configuring as keyboard
[     8.567] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/LNXVIDEO:00/input/input15/event7"
[     8.567] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[     8.567] (**) Option "xkb_rules" "evdev"
[     8.567] (**) Option "xkb_model" "pc105"
[     8.567] (**) Option "xkb_layout" "fr"
[     8.567] (**) Option "xkb_variant" "latin9"
[     8.568] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[     8.568] (II) No input driver specified, ignoring this device.
[     8.568] (II) This device may have been added with another device file.
[     8.568] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[     8.568] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[     8.568] (II) Using input driver 'evdev' for 'Sleep Button'
[     8.568] (**) Sleep Button: always reports core events
[     8.568] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[     8.568] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[     8.568] (--) evdev: Sleep Button: Found keys
[     8.568] (II) evdev: Sleep Button: Configuring as keyboard
[     8.568] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1/event1"
[     8.568] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[     8.568] (**) Option "xkb_rules" "evdev"
[     8.568] (**) Option "xkb_model" "pc105"
[     8.568] (**) Option "xkb_layout" "fr"
[     8.568] (**) Option "xkb_variant" "latin9"
[     8.568] (II) config/udev: Adding drm device (/dev/dri/card1)
[     8.568] (II) config/udev: Ignoring already known drm device (/dev/dri/card1)
[     8.568] (II) config/udev: Adding drm device (/dev/dri/card0)
[     8.568] (II) config/udev: Ignoring already known drm device (/dev/dri/card0)
[     8.569] (II) config/udev: Adding input device Microsoft Microsoft® Nano Transceiver v2.0 (/dev/input/event4)
[     8.569] (**) Microsoft Microsoft® Nano Transceiver v2.0: Applying InputClass "evdev keyboard catchall"
[     8.569] (II) Using input driver 'evdev' for 'Microsoft Microsoft® Nano Transceiver v2.0'
[     8.569] (**) Microsoft Microsoft® Nano Transceiver v2.0: always reports core events
[     8.569] (**) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Device: "/dev/input/event4"
[     8.569] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Vendor 0x45e Product 0x745
[     8.569] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Found keys
[     8.569] (II) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Configuring as keyboard
[     8.569] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/input/input12/event4"
[     8.569] (II) XINPUT: Adding extended input device "Microsoft Microsoft® Nano Transceiver v2.0" (type: KEYBOARD, id 10)
[     8.569] (**) Option "xkb_rules" "evdev"
[     8.569] (**) Option "xkb_model" "pc105"
[     8.569] (**) Option "xkb_layout" "fr"
[     8.569] (**) Option "xkb_variant" "latin9"
[     8.569] (II) config/udev: Adding input device Microsoft Microsoft® Nano Transceiver v2.0 (/dev/input/event5)
[     8.569] (**) Microsoft Microsoft® Nano Transceiver v2.0: Applying InputClass "evdev pointer catchall"
[     8.569] (**) Microsoft Microsoft® Nano Transceiver v2.0: Applying InputClass "evdev keyboard catchall"
[     8.569] (II) Using input driver 'evdev' for 'Microsoft Microsoft® Nano Transceiver v2.0'
[     8.569] (**) Microsoft Microsoft® Nano Transceiver v2.0: always reports core events
[     8.569] (**) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Device: "/dev/input/event5"
[     8.569] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Vendor 0x45e Product 0x745
[     8.569] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Found 9 mouse buttons
[     8.569] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Found scroll wheel(s)
[     8.569] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Found relative axes
[     8.569] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Found x and y relative axes
[     8.569] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Found absolute axes
[     8.569] (II) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Forcing absolute x/y axes to exist.
[     8.569] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Found keys
[     8.569] (II) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Configuring as mouse
[     8.569] (II) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Configuring as keyboard
[     8.569] (II) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Adding scrollwheel support
[     8.569] (**) evdev: Microsoft Microsoft® Nano Transceiver v2.0: YAxisMapping: buttons 4 and 5
[     8.569] (**) evdev: Microsoft Microsoft® Nano Transceiver v2.0: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[     8.569] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/input/input13/event5"
[     8.569] (II) XINPUT: Adding extended input device "Microsoft Microsoft® Nano Transceiver v2.0" (type: KEYBOARD, id 11)
[     8.569] (**) Option "xkb_rules" "evdev"
[     8.569] (**) Option "xkb_model" "pc105"
[     8.569] (**) Option "xkb_layout" "fr"
[     8.569] (**) Option "xkb_variant" "latin9"
[     8.570] (II) evdev: Microsoft Microsoft® Nano Transceiver v2.0: initialized for relative axes.
[     8.570] (WW) evdev: Microsoft Microsoft® Nano Transceiver v2.0: ignoring absolute axes.
[     8.570] (**) Microsoft Microsoft® Nano Transceiver v2.0: (accel) keeping acceleration scheme 1
[     8.570] (**) Microsoft Microsoft® Nano Transceiver v2.0: (accel) acceleration profile 0
[     8.570] (**) Microsoft Microsoft® Nano Transceiver v2.0: (accel) acceleration factor: 2.000
[     8.570] (**) Microsoft Microsoft® Nano Transceiver v2.0: (accel) acceleration threshold: 4
[     8.570] (II) config/udev: Adding input device Microsoft Microsoft® Nano Transceiver v2.0 (/dev/input/mouse0)
[     8.570] (II) No input driver specified, ignoring this device.
[     8.570] (II) This device may have been added with another device file.
[     8.570] (II) config/udev: Adding input device Microsoft Microsoft® Nano Transceiver v2.0 (/dev/input/event6)
[     8.570] (**) Microsoft Microsoft® Nano Transceiver v2.0: Applying InputClass "evdev keyboard catchall"
[     8.570] (II) Using input driver 'evdev' for 'Microsoft Microsoft® Nano Transceiver v2.0'
[     8.570] (**) Microsoft Microsoft® Nano Transceiver v2.0: always reports core events
[     8.570] (**) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Device: "/dev/input/event6"
[     8.570] (II) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Using mtdev for this device
[     8.570] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Vendor 0x45e Product 0x745
[     8.570] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Found 1 mouse buttons
[     8.570] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Found scroll wheel(s)
[     8.570] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Found relative axes
[     8.570] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Found absolute axes
[     8.570] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Found absolute multitouch axes
[     8.570] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Found x and y absolute axes
[     8.570] (--) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Found keys
[     8.570] (II) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Forcing relative x/y axes to exist.
[     8.570] (II) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Configuring as mouse
[     8.570] (II) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Configuring as keyboard
[     8.570] (II) evdev: Microsoft Microsoft® Nano Transceiver v2.0: Adding scrollwheel support
[     8.570] (**) evdev: Microsoft Microsoft® Nano Transceiver v2.0: YAxisMapping: buttons 4 and 5
[     8.570] (**) evdev: Microsoft Microsoft® Nano Transceiver v2.0: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[     8.570] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.2/input/input14/event6"
[     8.570] (II) XINPUT: Adding extended input device "Microsoft Microsoft® Nano Transceiver v2.0" (type: KEYBOARD, id 12)
[     8.570] (**) Option "xkb_rules" "evdev"
[     8.570] (**) Option "xkb_model" "pc105"
[     8.570] (**) Option "xkb_layout" "fr"
[     8.570] (**) Option "xkb_variant" "latin9"
[     8.571] (II) evdev: Microsoft Microsoft® Nano Transceiver v2.0: initialized for relative axes.
[     8.571] (WW) evdev: Microsoft Microsoft® Nano Transceiver v2.0: ignoring absolute axes.
[     8.571] (**) Microsoft Microsoft® Nano Transceiver v2.0: (accel) keeping acceleration scheme 1
[     8.571] (**) Microsoft Microsoft® Nano Transceiver v2.0: (accel) acceleration profile 0
[     8.571] (**) Microsoft Microsoft® Nano Transceiver v2.0: (accel) acceleration factor: 2.000
[     8.571] (**) Microsoft Microsoft® Nano Transceiver v2.0: (accel) acceleration threshold: 4
[     8.571] (II) config/udev: Adding input device Microsoft Microsoft® Nano Transceiver v2.0 (/dev/input/js0)
[     8.571] (II) No input driver specified, ignoring this device.
[     8.571] (II) This device may have been added with another device file.
[     8.571] (II) config/udev: Adding input device USB Camera (/dev/input/event14)
[     8.571] (**) USB Camera: Applying InputClass "evdev keyboard catchall"
[     8.571] (II) Using input driver 'evdev' for 'USB Camera'
[     8.571] (**) USB Camera: always reports core events
[     8.571] (**) evdev: USB Camera: Device: "/dev/input/event14"
[     8.571] (--) evdev: USB Camera: Vendor 0xbda Product 0x5705
[     8.571] (--) evdev: USB Camera: Found keys
[     8.571] (II) evdev: USB Camera: Configuring as keyboard
[     8.571] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input22/event14"
[     8.571] (II) XINPUT: Adding extended input device "USB Camera" (type: KEYBOARD, id 13)
[     8.571] (**) Option "xkb_rules" "evdev"
[     8.571] (**) Option "xkb_model" "pc105"
[     8.571] (**) Option "xkb_layout" "fr"
[     8.571] (**) Option "xkb_variant" "latin9"
[     8.572] (II) config/udev: Adding input device Atmel Atmel maXTouch Digitizer (/dev/input/event13)
[     8.572] (**) Atmel Atmel maXTouch Digitizer: Applying InputClass "evdev touchscreen catchall"
[     8.572] (II) Using input driver 'evdev' for 'Atmel Atmel maXTouch Digitizer'
[     8.572] (**) Atmel Atmel maXTouch Digitizer: always reports core events
[     8.572] (**) evdev: Atmel Atmel maXTouch Digitizer: Device: "/dev/input/event13"
[     8.572] (II) evdev: Atmel Atmel maXTouch Digitizer: Using mtdev for this device
[     8.572] (--) evdev: Atmel Atmel maXTouch Digitizer: Vendor 0x3eb Product 0x8819
[     8.572] (--) evdev: Atmel Atmel maXTouch Digitizer: Found absolute axes
[     8.572] (--) evdev: Atmel Atmel maXTouch Digitizer: Found absolute multitouch axes
[     8.572] (II) evdev: Atmel Atmel maXTouch Digitizer: No buttons found, faking one.
[     8.572] (--) evdev: Atmel Atmel maXTouch Digitizer: Found x and y absolute axes
[     8.572] (--) evdev: Atmel Atmel maXTouch Digitizer: Found absolute touchscreen
[     8.572] (II) evdev: Atmel Atmel maXTouch Digitizer: Configuring as touchscreen
[     8.572] (**) evdev: Atmel Atmel maXTouch Digitizer: YAxisMapping: buttons 4 and 5
[     8.572] (**) evdev: Atmel Atmel maXTouch Digitizer: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[     8.572] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input20/event13"
[     8.572] (II) XINPUT: Adding extended input device "Atmel Atmel maXTouch Digitizer" (type: TOUCHSCREEN, id 14)
[     8.572] (II) evdev: Atmel Atmel maXTouch Digitizer: initialized for absolute axes.
[     8.572] (**) Atmel Atmel maXTouch Digitizer: (accel) keeping acceleration scheme 1
[     8.572] (**) Atmel Atmel maXTouch Digitizer: (accel) acceleration profile 0
[     8.572] (**) Atmel Atmel maXTouch Digitizer: (accel) acceleration factor: 2.000
[     8.572] (**) Atmel Atmel maXTouch Digitizer: (accel) acceleration threshold: 4
[     8.572] (II) config/udev: Adding input device Atmel Atmel maXTouch Digitizer (/dev/input/mouse2)
[     8.572] (II) No input driver specified, ignoring this device.
[     8.572] (II) This device may have been added with another device file.
[     8.573] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11)
[     8.573] (II) No input driver specified, ignoring this device.
[     8.573] (II) This device may have been added with another device file.
[     8.573] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event10)
[     8.573] (II) No input driver specified, ignoring this device.
[     8.573] (II) This device may have been added with another device file.
[     8.573] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event12)
[     8.573] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[     8.573] (II) Using input driver 'evdev' for 'Asus WMI hotkeys'
[     8.573] (**) Asus WMI hotkeys: always reports core events
[     8.573] (**) evdev: Asus WMI hotkeys: Device: "/dev/input/event12"
[     8.573] (--) evdev: Asus WMI hotkeys: Vendor 0 Product 0
[     8.573] (--) evdev: Asus WMI hotkeys: Found keys
[     8.573] (II) evdev: Asus WMI hotkeys: Configuring as keyboard
[     8.573] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input19/event12"
[     8.573] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 15)
[     8.573] (**) Option "xkb_rules" "evdev"
[     8.573] (**) Option "xkb_model" "pc105"
[     8.573] (**) Option "xkb_layout" "fr"
[     8.573] (**) Option "xkb_variant" "latin9"
[     8.574] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[     8.574] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[     8.574] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[     8.574] (**) AT Translated Set 2 keyboard: always reports core events
[     8.574] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[     8.574] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[     8.574] (--) evdev: AT Translated Set 2 keyboard: Found keys
[     8.574] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[     8.574] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[     8.574] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 16)
[     8.574] (**) Option "xkb_rules" "evdev"
[     8.574] (**) Option "xkb_model" "pc105"
[     8.574] (**) Option "xkb_layout" "fr"
[     8.574] (**) Option "xkb_variant" "latin9"
[     8.574] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event8)
[     8.574] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[     8.574] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[     8.574] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[     8.574] (II) LoadModule: "synaptics"
[     8.574] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[     8.574] (II) Module synaptics: vendor="X.Org Foundation"
[     8.574] 	compiled for 1.15.0, module version = 1.7.4
[     8.574] 	Module class: X.Org XInput Driver
[     8.574] 	ABI class: X.Org XInput driver, version 20.0
[     8.574] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[     8.574] (**) ETPS/2 Elantech Touchpad: always reports core events
[     8.574] (**) Option "Device" "/dev/input/event8"
[     8.592] (II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property
[     8.592] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 3249 (res 33)
[     8.592] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 2223 (res 33)
[     8.592] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[     8.592] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[     8.592] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left double triple
[     8.592] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[     8.592] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[     8.592] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[     8.592] (**) ETPS/2 Elantech Touchpad: always reports core events
[     8.604] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input11/event8"
[     8.604] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 17)
[     8.604] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[     8.604] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[     8.604] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.051
[     8.605] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[     8.605] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[     8.605] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[     8.605] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[     8.605] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[     8.606] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse1)
[     8.606] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[     8.620] (WW) config/udev: device USB Camera already added. Ignoring.
[     8.723] (II) modesetting(G0): EDID vendor "SEC", prod id 13130
[     8.723] (II) modesetting(G0): Printing DDC gathered Modelines:
[     8.723] (II) modesetting(G0): Modeline "1366x768"x0.0   78.05  1366 1414 1446 1646  768 770 775 790 -hsync -vsync (47.4 kHz eP)
[     8.725] reporting 3 4 28 201
[     8.748] have a master to look out for
[     8.748] adjust shatters 0 1366
[     8.751] need to create shared pixmap 1(II) modesetting(G0): EDID vendor "SEC", prod id 13130
[     8.973] (II) modesetting(G0): Printing DDC gathered Modelines:
[     8.973] (II) modesetting(G0): Modeline "1366x768"x0.0   78.05  1366 1414 1446 1646  768 770 775 790 -hsync -vsync (47.4 kHz eP)
[     8.975] reporting 3 4 28 201
[     8.982] (II) modesetting(G0): EDID vendor "SEC", prod id 13130
[     8.982] (II) modesetting(G0): Printing DDC gathered Modelines:
[     8.982] (II) modesetting(G0): Modeline "1366x768"x0.0   78.05  1366 1414 1446 1646  768 770 775 790 -hsync -vsync (47.4 kHz eP)
[     8.984] reporting 3 4 28 201
[     8.985] have a master to look out for
[     9.036] need to create shared pixmap 1(II) modesetting(G0): EDID vendor "SEC", prod id 13130
[     9.058] (II) modesetting(G0): Printing DDC gathered Modelines:
[     9.058] (II) modesetting(G0): Modeline "1366x768"x0.0   78.05  1366 1414 1446 1646  768 770 775 790 -hsync -vsync (47.4 kHz eP)
[     9.060] reporting 3 4 28 201
[     9.087] have a master to look out for
[     9.087] adjust shatters 0 1366
[     9.090] need to create shared pixmap 1reporting 3 4 28 201
[     9.837] reporting 3 4 28 201
[    19.114] reporting 3 4 28 201
[    19.128] reporting 3 4 28 201
[    20.350] reporting 3 4 28 201
[    20.461] reporting 3 4 28 201
[    20.494] (II) modesetting(G0): EDID vendor "SEC", prod id 13130
[    20.494] (II) modesetting(G0): Printing DDC gathered Modelines:
[    20.495] (II) modesetting(G0): Modeline "1366x768"x0.0   78.05  1366 1414 1446 1646  768 770 775 790 -hsync -vsync (47.4 kHz eP)
[    20.496] reporting 3 4 28 201
[    20.849] reporting 3 4 28 201
[    50.430] reporting 3 4 28 201
[    50.506] reporting 3 4 28 201
[    50.508] (II) modesetting(G0): EDID vendor "SEC", prod id 13130
[    50.508] (II) modesetting(G0): Printing DDC gathered Modelines:
[    50.508] (II) modesetting(G0): Modeline "1366x768"x0.0   78.05  1366 1414 1446 1646  768 770 775 790 -hsync -vsync (47.4 kHz eP)
[    50.510] reporting 3 4 28 201
[    50.675] (II) XKB: reuse xkmfile /var/lib/xkb/server-9372948B54F3D44BCBD2145E4B679EC9B1ADFAFC.xkm
[    50.689] reporting 3 4 28 201
[    50.697] (II) XKB: reuse xkmfile /var/lib/xkb/server-A259C6EEEEAD8D1BC98F40C2CB18EB655E2B7DA3.xkm
[    50.700] reporting 3 4 28 201
[    50.709] reporting 3 4 28 201
[    50.715] reporting 3 4 28 201
[    50.716] reporting 3 4 28 201
[    50.723] reporting 3 4 28 201
[    50.836] reporting 3 4 28 201
[    53.991] (II) XKB: reuse xkmfile /var/lib/xkb/server-A259C6EEEEAD8D1BC98F40C2CB18EB655E2B7DA3.xkm
[    53.995] (II) XKB: reuse xkmfile /var/lib/xkb/server-A259C6EEEEAD8D1BC98F40C2CB18EB655E2B7DA3.xkm
[    53.999] (II) XKB: reuse xkmfile /var/lib/xkb/server-A259C6EEEEAD8D1BC98F40C2CB18EB655E2B7DA3.xkm
[    54.003] (II) XKB: reuse xkmfile /var/lib/xkb/server-A259C6EEEEAD8D1BC98F40C2CB18EB655E2B7DA3.xkm
[    54.007] (II) XKB: reuse xkmfile /var/lib/xkb/server-A259C6EEEEAD8D1BC98F40C2CB18EB655E2B7DA3.xkm
[    54.011] (II) XKB: reuse xkmfile /var/lib/xkb/server-A259C6EEEEAD8D1BC98F40C2CB18EB655E2B7DA3.xkm
[    54.014] (II) XKB: reuse xkmfile /var/lib/xkb/server-A259C6EEEEAD8D1BC98F40C2CB18EB655E2B7DA3.xkm
[    54.017] (II) XKB: reuse xkmfile /var/lib/xkb/server-A259C6EEEEAD8D1BC98F40C2CB18EB655E2B7DA3.xkm
[    54.019] (II) XKB: reuse xkmfile /var/lib/xkb/server-A259C6EEEEAD8D1BC98F40C2CB18EB655E2B7DA3.xkm
[    54.022] (II) XKB: reuse xkmfile /var/lib/xkb/server-A259C6EEEEAD8D1BC98F40C2CB18EB655E2B7DA3.xkm
[    54.025] (II) XKB: reuse xkmfile /var/lib/xkb/server-A259C6EEEEAD8D1BC98F40C2CB18EB655E2B7DA3.xkm
[    54.030] (II) XKB: reuse xkmfile /var/lib/xkb/server-A259C6EEEEAD8D1BC98F40C2CB18EB655E2B7DA3.xkm
[    54.730] reporting 3 4 28 201
[    57.854] reporting 3 4 28 201
[    61.357] reporting 3 4 28 201
[    66.350] reporting 3 4 28 201
[    71.356] reporting 3 4 28 201
[    71.371] (II) modesetting(G0): EDID vendor "SEC", prod id 13130
[    71.371] (II) modesetting(G0): Printing DDC gathered Modelines:
[    71.371] (II) modesetting(G0): Modeline "1366x768"x0.0   78.05  1366 1414 1446 1646  768 770 775 790 -hsync -vsync (47.4 kHz eP)
[    71.373] reporting 3 4 28 201
[    71.430] reporting 3 4 28 201
[    80.527] reporting 3 4 28 201
[    80.742] reporting 3 4 28 201
[   507.931] reporting 3 4 28 201
[   864.001] reporting 3 4 28 201
[   875.991] reporting 3 4 28 201
[   886.514] reporting 3 4 28 201
[   886.629] reporting 3 4 28 201
[  1532.810] reporting 3 4 28 201

Merci à tous ceux qui me répondrons, bonne journée.

Dernière modification par Wizix (Le 28/06/2014, à 12:19)

Nombre de PC convertis : 6

Hors ligne

#2 Le 28/06/2014, à 10:27

PPdM

Re : [Résolu] Problème d'affichage suite à tentative de dual screen

Tu as une double carte graphique il faut voir là

La critique est facile, mais l'art est difficile !
L'humanité étant ce qu'elle est, la liberté ne sera jamais un acquit, mais toujours un droit à défendre !
Pour résoudre un problème commence par poser les bonnes questions, la bonne solution en découlera

Hors ligne

#3 Le 28/06/2014, à 11:39

Wizix

Re : [Résolu] Problème d'affichage suite à tentative de dual screen

On m'a dit que ça ne servait à rien d'utiliser Bumblebee puisque le driver 331 de Nvidia gérait Optimus sous Linux... On me l'a dit hier sur ce forum.

EDIT : Bref, Bumblebee à bien corrigé tout mes problèmes ! Mais il reste le même problème que j'avais hier sur ce post : http://forum.ubuntu-fr.org/viewtopic.php?id=1613461
Quand j'essaye de lancer un programme avec optirun voilà le terminal qui m'insulte : 

optirun glxgears
[  111.414260] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) intel(0): [drm] failed to set drm interface version: Permission denied [13].

[  111.414334] [ERROR]Aborting because fallback start is disabled.

Que puis-je faire ?

Dernière modification par Wizix (Le 28/06/2014, à 11:45)

Nombre de PC convertis : 6

Hors ligne

#4 Le 28/06/2014, à 12:01

PPdM

Re : [Résolu] Problème d'affichage suite à tentative de dual screen

Voir sur le lien plus haut eux sont les spécialiste de ta conf !

La critique est facile, mais l'art est difficile !
L'humanité étant ce qu'elle est, la liberté ne sera jamais un acquit, mais toujours un droit à défendre !
Pour résoudre un problème commence par poser les bonnes questions, la bonne solution en découlera

Hors ligne

#5 Le 28/06/2014, à 12:18

Wizix

Re : [Résolu] Problème d'affichage suite à tentative de dual screen

D'accord, c'est envoyé, merci beaucoup ! Bonne journée smile

Nombre de PC convertis : 6

Hors ligne

Pages : 1