[Résolu] (attention au inode!) Disque plein ???

Ski-lleR · Le 11/05/2008, à 08:20

Bonjour

Ce matin je sors mon pc de veille, et je découvre que je ne peux plus rien copier, couper/coller dans la partition /home, car ubuntu me dit qu'il n'y a plus d'espace libre.

Hors j'avais 8 go d'espace libre. Comme j'ai entendu parler de l'espace réserver (sachant que le problème ne se produit qu'avec /home, donc l'espace réservé pour root...), j'ai supprimé des fichiers. Maintenant il me dit que j'ai 12 go d'espace libre, mais je peux toujours rien copié...

jeremy@unknown-system:~/msn$ df -h
Sys. de fich. Tail. Occ. Disp. %Occ. Monté sur
/dev/sdb7 19G 4,1G 14G 24% /
varrun 252M 76K 252M 1% /var/run
varlock 252M 0 252M 0% /var/lock
udev 252M 76K 252M 1% /dev
devshm 252M 12K 252M 1% /dev/shm
lrm 252M 38M 215M 15% /lib/modules/2.6.24-17-generic/volatile
/dev/sdb6 89M 40M 45M 47% /boot
/dev/sdb8 55G 39G 13G 75% /home
gvfs-fuse-daemon 19G 4,1G 14G 24% /home/jeremy/.gvfs

What's the hell ?

Dernière modification par Ski-lleR (Le 12/05/2008, à 11:11)

Ski-lleR · Le 11/05/2008, à 08:31

Bon la ca devient inquiétant y'a 10 minutes je télécharge msn svn ça marche, là je viens de libérer 4 go et je ne peux plus télécharger quoi que ce soit!

tylhdar · Le 11/05/2008, à 09:13

http://forum.ubuntu-fr.org/viewtopic.php?id=207520

sudo fsck.ext3 -cp

Ski-lleR · Le 11/05/2008, à 11:15

je l'ai fait, ca a corrigé des truc apparement, mais j'ai toujours le même problème

Pourtant y'a l'air d'avoir de l'espace!

Selon l'analyseur, mon /home, qui est une partition de 54 go, serait occupé à 100%, hors il me dit qu'il y a 36,6 Go d'occupé, étrange gestion des pourcentages...ou sont passé mes 15 go ?

Dernière modification par Ski-lleR (Le 11/05/2008, à 11:21)

Ski-lleR · Le 11/05/2008, à 19:38

Exemple encore concret, je ne pouvais pas du tout télécharger amsn svn, car plsu d'espace. la tout à coup je peux, je compile etc...et quand je passe au téléchargement des plugins svn, même erreur...>

Tout à l'heure je ne pouvais pas faire de capture d'écran, là je peux...preuve au dessus!

Qu'est-ce qui se passe...ça doit faire une semaine que j'ai ubuntu, j'ai rien fait de spécial, du jour au lendemain plus rien marche...

On voit pourtant bien: 14 go d'espace libre

Dernière modification par Ski-lleR (Le 11/05/2008, à 19:40)

tylhdar · Le 11/05/2008, à 20:56

sudo dmesg

Dernière modification par tylhdar (Le 11/05/2008, à 20:57)

Ski-lleR · Le 11/05/2008, à 21:10

Voila voila, c'est très long ^^
J'ai regarder tout ceux qu'on eu un problème similaire, et ils sont tous passé par la case formatage. Le format n'est pas une solution

Précision: le disque dur est neuf

jeremy@unknown-system:~$ sudo dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.24-17-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu May 1 14:31:33 UTC 2008 (Ubuntu 2.6.24-17.31-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
[    0.000000]  BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 511MB LOWMEM available.
[    0.000000] found SMP MP-table at 000f5250
[    0.000000] Entering add_active_range(0, 0, 131056) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   131056
[    0.000000]   HighMem    131056 ->   131056
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   131056
[    0.000000] On node 0 totalpages: 131056
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 991 pages used for memmap
[    0.000000]   Normal zone: 125969 pages, LIFO batch:31
[    0.000000]   HighMem zone: 0 pages used for memmap
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] DMI 2.2 present.
[    0.000000] ACPI: RSDP signature @ 0xC00F7160 checksum 0
[    0.000000] ACPI: RSDP 000F7160, 0014 (r0 Nvidia)
[    0.000000] ACPI: RSDT 1FFF3040, 0034 (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
[    0.000000] ACPI: FACP 1FFF30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
[    0.000000] ACPI: DSDT 1FFF3180, 5CD9 (r1 NVIDIA AWRDACPI     1000 MSFT  100000E)
[    0.000000] ACPI: FACS 1FFF0000, 0040
[    0.000000] ACPI: SSDT 1FFF8F80, 00B5 (r1 PTLTD  POWERNOW        1  LTP        1)
[    0.000000] ACPI: MCFG 1FFF9080, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
[    0.000000] ACPI: APIC 1FFF8EC0, 007C (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
[    0.000000] ACPI: DMI detected: Fujitsu Siemens
[    0.000000] Nvidia board detected. Ignoring ACPI timer override.
[    0.000000] If you got timer trouble try acpi_use_timer_override
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 15:15 APIC version 16
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000)
[    0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 130033
[    0.000000] Kernel command line: root=UUID=3fb3101b-7ddc-42b4-92e4-122419b69720 ro splash vga=794
[    0.000000] mapped APIC to ffffb000 (fee00000)
[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[    0.000000] Detected 1809.309 MHz processor.
[   11.489324] spurious 8259A interrupt: IRQ7.
[   11.489347] Console: colour dummy device 80x25
[   11.489350] console [tty0] enabled
[   11.489691] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[   11.490007] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[   11.498801] Memory: 507396k/524224k available (2176k kernel code, 16304k reserved, 1007k data, 368k init, 0k highmem)
[   11.498816] virtual kernel memory layout:
[   11.498817]     fixmap  : 0xfff4b000 - 0xfffff000   ( 720 kB)
[   11.498818]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   11.498819]     vmalloc : 0xe0800000 - 0xff7fe000   ( 495 MB)
[   11.498821]     lowmem  : 0xc0000000 - 0xdfff0000   ( 511 MB)
[   11.498822]       .init : 0xc0421000 - 0xc047d000   ( 368 kB)
[   11.498823]       .data : 0xc0320134 - 0xc041bdc4   (1007 kB)
[   11.498824]       .text : 0xc0100000 - 0xc0320134   (2176 kB)
[   11.498850] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   11.498884] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[   11.578775] Calibrating delay using timer specific routine.. 3620.94 BogoMIPS (lpj=7241895)
[   11.578800] Security Framework initialized
[   11.578807] SELinux:  Disabled at boot.
[   11.578821] AppArmor: AppArmor initialized
[   11.578827] Failure registering capabilities with primary security module.
[   11.578837] Mount-cache hash table entries: 512
[   11.578934] Initializing cgroup subsys ns
[   11.578940] Initializing cgroup subsys cpuacct
[   11.578951] CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001 00000000
[   11.578959] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   11.578964] CPU: L2 Cache: 128K (64 bytes/line)
[   11.578969] CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000001 00000000
[   11.578977] Compat vDSO mapped to ffffe000.
[   11.578988] Checking 'hlt' instruction... OK.
[   11.595003] SMP alternatives: switching to UP code
[   11.596091] Freeing SMP alternatives: 11k freed
[   11.596207] Early unpacking initramfs... done
[   11.942032] ACPI: Core revision 20070126
[   11.942098] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[   11.946748] CPU0: AMD Sempron(tm) Processor 3000+ stepping 02
[   11.946772] Total of 1 processors activated (3620.94 BogoMIPS).
[   11.946909] ENABLING IO-APIC IRQs
[   11.947096] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[   11.986758] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[   11.986762] ...trying to set up timer (IRQ0) through the 8259A ...  failed.
[   11.986768] ...trying to set up timer as Virtual Wire IRQ... failed.
[   12.026414] ...trying to set up timer as ExtINT IRQ... works.
[   12.269681] Brought up 1 CPUs
[   12.269715] CPU0 attaching sched-domain:
[   12.269717]  domain 0: span 01
[   12.269719]   groups: 01
[   12.269883] net_namespace: 64 bytes
[   12.269893] Booting paravirtualized kernel on bare hardware
[   12.270339] Time: 21:02:29  Date: 05/11/08
[   12.270367] NET: Registered protocol family 16
[   12.270537] EISA bus registered
[   12.270568] ACPI: bus type pci registered
[   12.275287] PCI: PCI BIOS revision 3.00 entry at 0xf2720, last bus=5
[   12.275293] PCI: Using configuration type 1
[   12.275297] Setting up standard PCI resources
[   12.280223] ACPI: EC: Look up EC in DSDT
[   12.288063] ACPI: Interpreter enabled
[   12.288075] ACPI: (supports S0 S3 S4 S5)
[   12.288091] ACPI: Using IOAPIC for interrupt routing
[   12.297026] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   12.297530] PCI: Transparent bridge - 0000:00:09.0
[   12.297880] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   12.298254] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[   12.360125] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[   12.360346] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[   12.360557] ACPI: PCI Interrupt Link [LNK3] (IRQs *3 4 5 7 9 10 11 12 14 15)
[   12.360766] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[   12.360979] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[   12.361191] ACPI: PCI Interrupt Link [LUBA] (IRQs *3 4 5 7 9 10 11 12 14 15)
[   12.361402] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[   12.361625] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[   12.361834] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[   12.362043] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[   12.362255] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[   12.362470] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[   12.362679] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[   12.362901] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[   12.363124] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[   12.363345] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[   12.363577] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[   12.363804] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
[   12.364030] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
[   12.364255] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
[   12.364409] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[   12.364640] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
[   12.364869] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
[   12.365098] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[   12.365326] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0
[   12.365566] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
[   12.365796] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[   12.366024] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
[   12.366256] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[   12.366499] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[   12.366736] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
[   12.366974] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
[   12.367159] Linux Plug and Play Support v0.97 (c) Adam Belay
[   12.367192] pnp: PnP ACPI init
[   12.367204] ACPI: bus type pnp registered
[   12.371529] pnpacpi: exceeded the max number of mem resources: 12
[   12.371613] pnp: PnP ACPI: found 11 devices
[   12.371619] ACPI: ACPI bus type pnp unregistered
[   12.371625] PnPBIOS: Disabled by ACPI PNP
[   12.371819] PCI: Using ACPI for IRQ routing
[   12.371826] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   12.445356] NET: Registered protocol family 8
[   12.445362] NET: Registered protocol family 20
[   12.445429] AppArmor: AppArmor Filesystem Enabled
[   12.449342] Time: tsc clocksource has been installed.
[   12.457365] system 00:01: ioport range 0x4000-0x407f has been reserved
[   12.457371] system 00:01: ioport range 0x4080-0x40ff has been reserved
[   12.457377] system 00:01: ioport range 0x4400-0x447f has been reserved
[   12.457382] system 00:01: ioport range 0x4480-0x44ff has been reserved
[   12.457388] system 00:01: ioport range 0x4800-0x487f has been reserved
[   12.457393] system 00:01: ioport range 0x4880-0x48ff has been reserved
[   12.457402] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[   12.457408] system 00:02: ioport range 0x800-0x87f has been reserved
[   12.457420] system 00:09: iomem range 0xe0000000-0xefffffff could not be reserved
[   12.457430] system 00:0a: iomem range 0xf0000-0xf3fff could not be reserved
[   12.457436] system 00:0a: iomem range 0xf4000-0xf7fff could not be reserved
[   12.457442] system 00:0a: iomem range 0xf8000-0xfbfff could not be reserved
[   12.457447] system 00:0a: iomem range 0xfc000-0xfffff could not be reserved
[   12.457453] system 00:0a: iomem range 0x1fff0000-0x1fffffff could not be reserved
[   12.457460] system 00:0a: iomem range 0xffff0000-0xffffffff could not be reserved
[   12.457466] system 00:0a: iomem range 0x0-0x9ffff could not be reserved
[   12.457472] system 00:0a: iomem range 0x100000-0x1ffeffff could not be reserved
[   12.457478] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
[   12.457485] system 00:0a: iomem range 0xfee00000-0xfeefffff could not be reserved
[   12.457492] system 00:0a: iomem range 0xfefff000-0xfeffffff could not be reserved
[   12.457498] system 00:0a: iomem range 0xfff80000-0xfff80fff could not be reserved
[   12.487823] PCI: Bridge: 0000:00:09.0
[   12.487829]   IO window: a000-afff
[   12.487835]   MEM window: d3000000-d30fffff
[   12.487839]   PREFETCH window: disabled.
[   12.487843] PCI: Bridge: 0000:00:0b.0
[   12.487847]   IO window: disabled.
[   12.487851]   MEM window: disabled.
[   12.487855]   PREFETCH window: disabled.
[   12.487860] PCI: Bridge: 0000:00:0c.0
[   12.487863]   IO window: disabled.
[   12.487868]   MEM window: disabled.
[   12.487872]   PREFETCH window: disabled.
[   12.487876] PCI: Bridge: 0000:00:0d.0
[   12.487880]   IO window: disabled.
[   12.487884]   MEM window: disabled.
[   12.487888]   PREFETCH window: disabled.
[   12.487893] PCI: Bridge: 0000:00:0e.0
[   12.487896]   IO window: disabled.
[   12.487901]   MEM window: d0000000-d2ffffff
[   12.487905]   PREFETCH window: c0000000-cfffffff
[   12.487914] PCI: Setting latency timer of device 0000:00:09.0 to 64
[   12.487926] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[   12.487933] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[   12.487939] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[   12.487946] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[   12.487958] NET: Registered protocol family 2
[   12.525286] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[   12.525501] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[   12.525598] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[   12.525708] TCP: Hash tables configured (established 16384 bind 16384)
[   12.525714] TCP reno registered
[   12.537329] checking if image is initramfs... it is
[   12.988452] Switched to high resolution mode on CPU 0
[   13.210505] Freeing initrd memory: 7667k freed
[   13.211035] audit: initializing netlink socket (disabled)
[   13.211053] audit(1210539750.448:1): initialized
[   13.212737] VFS: Disk quotas dquot_6.5.1
[   13.212813] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   13.212943] io scheduler noop registered
[   13.212948] io scheduler anticipatory registered
[   13.212953] io scheduler deadline registered
[   13.212965] io scheduler cfq registered (default)
[   13.227982] PCI: Found disabled HT MSI Mapping on 0000:00:0b.0
[   13.227992] PCI: Found enabled HT MSI Mapping on 0000:00:00.0
[   13.228000] PCI: Found disabled HT MSI Mapping on 0000:00:0c.0
[   13.228010] PCI: Found enabled HT MSI Mapping on 0000:00:00.0
[   13.228018] PCI: Found disabled HT MSI Mapping on 0000:00:0d.0
[   13.228028] PCI: Found enabled HT MSI Mapping on 0000:00:00.0
[   13.228036] PCI: Found disabled HT MSI Mapping on 0000:00:0e.0
[   13.228046] PCI: Found enabled HT MSI Mapping on 0000:00:00.0
[   13.228056] Boot video device is 0000:01:00.0
[   13.228165] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[   13.228186] assign_interrupt_mode Found MSI capability
[   13.228207] Allocate Port Service[0000:00:0b.0:pcie00]
[   13.228265] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[   13.228284] assign_interrupt_mode Found MSI capability
[   13.228301] Allocate Port Service[0000:00:0c.0:pcie00]
[   13.228351] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[   13.228370] assign_interrupt_mode Found MSI capability
[   13.228387] Allocate Port Service[0000:00:0d.0:pcie00]
[   13.228437] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[   13.228456] assign_interrupt_mode Found MSI capability
[   13.228472] Allocate Port Service[0000:00:0e.0:pcie00]
[   13.228651] isapnp: Scanning for PnP cards...
[   13.580762] isapnp: No Plug & Play device found
[   13.609739] Real Time Clock Driver v1.12ac
[   13.609832] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   13.609947] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   13.610535] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   13.611194] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   13.611263] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[   13.611408] PNP: No PS/2 controller found. Probing ports directly.
[   13.614105] serio: i8042 KBD port at 0x60,0x64 irq 1
[   13.614112] serio: i8042 AUX port at 0x60,0x64 irq 12
[   13.619424] mice: PS/2 mouse device common for all mice
[   13.619542] EISA: Probing bus 0 at eisa.0
[   13.619557] Cannot allocate resource for EISA slot 4
[   13.619571] EISA: Detected 0 cards.
[   13.619575] cpuidle: using governor ladder
[   13.619579] cpuidle: using governor menu
[   13.619663] NET: Registered protocol family 1
[   13.619690] Using IPI No-Shortcut mode
[   13.619722] registered taskstats version 1
[   13.619828]   Magic number: 8:10:45
[   13.619836]   hash matches device ttyee
[   13.619962] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   13.619967] EDD information not available.
[   13.620219] Freeing unused kernel memory: 368k freed
[   13.715170] vesafb: framebuffer at 0xc0000000, mapped to 0xe0880000, using 5120k, total 65536k
[   13.715183] vesafb: mode is 1280x1024x16, linelength=2560, pages=1
[   13.715189] vesafb: protected mode interface info at c000:d2d0
[   13.715194] vesafb: pmi: set display start = c00cd306, set palette = c00cd370
[   13.715199] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da 
[   13.715216] vesafb: scrolling: redraw
[   13.715221] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[   13.715328] Console: switching to colour frame buffer device 160x64
[   13.735032] fb0: VESA VGA frame buffer device
[   14.972898] vga16fb: initializing
[   14.972903] vga16fb: mapped to 0xc00a0000
[   14.972954] fb1: VGA16 VGA frame buffer device
[   15.068839] fuse init (API version 7.9)
[   15.142385] ACPI: Fan [FAN] (on)
[   15.148393] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[   15.151430] ACPI: Thermal Zone [THRM] (40 C)
[   16.438400] usbcore: registered new interface driver usbfs
[   16.438423] usbcore: registered new interface driver hub
[   16.458337] usbcore: registered new device driver usb
[   16.489040] SCSI subsystem initialized
[   16.498283] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[   16.498692] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
[   16.498701] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 16
[   16.498713] PCI: Setting latency timer of device 0000:00:02.0 to 64
[   16.498716] ohci_hcd 0000:00:02.0: OHCI Host Controller
[   16.498968] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[   16.498983] ohci_hcd 0000:00:02.0: irq 16, io mem 0xd3104000
[   16.556241] usb usb1: configuration #1 chosen from 1 choice
[   16.556267] hub 1-0:1.0: USB hub found
[   16.556274] hub 1-0:1.0: 8 ports detected
[   16.570114] libata version 3.00 loaded.
[   16.658525] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[   16.658536] ACPI: PCI Interrupt 0000:00:02.1[b] -> Link [APCL] -> GSI 22 (level, low) -> IRQ 17
[   16.658547] PCI: Setting latency timer of device 0000:00:02.1 to 64
[   16.658550] ehci_hcd 0000:00:02.1: EHCI Host Controller
[   16.658582] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
[   16.658610] ehci_hcd 0000:00:02.1: debug port 1
[   16.658614] PCI: cache line size of 64 is not supported by device 0000:00:02.1
[   16.658624] ehci_hcd 0000:00:02.1: irq 17, io mem 0xfeb00000
[   16.669924] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   16.670046] usb usb2: configuration #1 chosen from 1 choice
[   16.670068] hub 2-0:1.0: USB hub found
[   16.670077] hub 2-0:1.0: 8 ports detected
[   16.773904] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[   16.774285] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
[   16.774293] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 21 (level, low) -> IRQ 18
[   16.774299] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[   17.293188] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x20 @ 1, addr 00:13:d4:d3:e4:82
[   17.293195] forcedeth 0000:00:0a.0: highdma csum timirq lnktim desc-v3
[   17.293311] pata_amd 0000:00:06.0: version 0.3.10
[   17.293362] PCI: Setting latency timer of device 0000:00:06.0 to 64
[   17.294632] scsi0 : pata_amd
[   17.295476] scsi1 : pata_amd
[   17.296233] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[   17.296236] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[   17.481956] ata1.00: ATA-7: WDC WD1600AAJB-00PVA0, 00.07H00, max UDMA/100
[   17.481961] ata1.00: 312581808 sectors, multi 1: LBA48 
[   17.540486] ata1.01: ATA-7: ST380215ACE, 3.ACF, max UDMA/100
[   17.540492] ata1.01: 156301488 sectors, multi 1: LBA48 
[   17.557629] ata1.00: configured for UDMA/100
[   17.615345] ata1.01: configured for UDMA/100
[   17.951935] ata2.01: ATAPI: _NEC DVD_RW ND-4550A, 1.09, max UDMA/33
[   18.047741] usb 2-7: new high speed USB device using ehci_hcd and address 5
[   18.123592] ata2.01: configured for UDMA/33
[   18.123698] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600AAJB-0 00.0 PQ: 0 ANSI: 5
[   18.124118] scsi 0:0:1:0: Direct-Access     ATA      ST380215ACE      3.AC PQ: 0 ANSI: 5
[   18.125677] scsi 1:0:1:0: CD-ROM            _NEC     DVD_RW ND-4550A  1.09 PQ: 0 ANSI: 5
[   18.128568] sata_nv 0000:00:07.0: version 3.5
[   18.129027] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20
[   18.129035] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 20 (level, low) -> IRQ 19
[   18.129040] sata_nv 0000:00:07.0: Using ADMA mode
[   18.129077] PCI: Setting latency timer of device 0000:00:07.0 to 64
[   18.131131] scsi2 : sata_nv
[   18.131491] scsi3 : sata_nv
[   18.131686] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 19
[   18.131689] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 19
[   18.195452] usb 2-7: configuration #1 chosen from 1 choice
[   18.442801] ata3: SATA link down (SStatus 0 SControl 300)
[   18.498692] usb 1-1: new full speed USB device using ohci_hcd and address 2
[   18.716521] usb 1-1: configuration #1 chosen from 1 choice
[   18.754273] ata4: SATA link down (SStatus 0 SControl 300)
[   18.754770] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23
[   18.754774] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 23 (level, low) -> IRQ 16
[   18.754779] sata_nv 0000:00:08.0: Using ADMA mode
[   18.754818] PCI: Setting latency timer of device 0000:00:08.0 to 64
[   18.755837] scsi4 : sata_nv
[   18.756185] scsi5 : sata_nv
[   18.756376] ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc400 irq 16
[   18.756380] ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc408 irq 16
[   19.021772] usb 1-3: new low speed USB device using ohci_hcd and address 3
[   19.065707] ata5: SATA link down (SStatus 0 SControl 300)
[   19.236626] usb 1-3: configuration #1 chosen from 1 choice
[   19.377146] ata6: SATA link down (SStatus 0 SControl 300)
[   19.379210] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[   19.379220] ACPI: PCI Interrupt 0000:05:02.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 20
[   19.431872] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[20]  MMIO=[d3008000-d30087ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[   19.457105] Driver 'sd' needs updating - please use bus_type methods
[   19.457182] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[   19.457194] sd 0:0:0:0: [sda] Write Protect is off
[   19.457197] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   19.457212] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   19.457253] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[   19.457261] sd 0:0:0:0: [sda] Write Protect is off
[   19.457264] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   19.457278] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   19.457281]  sda: sda1
[   19.461132] sd 0:0:0:0: [sda] Attached SCSI disk
[   19.461200] sd 0:0:1:0: [sdb] 156301488 512-byte hardware sectors (80026 MB)
[   19.461211] sd 0:0:1:0: [sdb] Write Protect is off
[   19.461214] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[   19.461229] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   19.461266] sd 0:0:1:0: [sdb] 156301488 512-byte hardware sectors (80026 MB)
[   19.461274] sd 0:0:1:0: [sdb] Write Protect is off
[   19.461276] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[   19.461290] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   19.461294]  sdb:<4>Driver 'sr' needs updating - please use bus_type methods
[   19.493011]  sdb2 < sdb5 sdb6 sdb7 sdb8 >
[   19.520878] sd 0:0:1:0: [sdb] Attached SCSI disk
[   19.531284] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   19.531305] sd 0:0:1:0: Attached scsi generic sg1 type 0
[   19.531321] sr 1:0:1:0: Attached scsi generic sg2 type 5
[   19.532682] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[   19.532688] Uniform CD-ROM driver Revision: 3.20
[   19.532739] sr 1:0:1:0: Attached scsi CD-ROM sr0
[   19.548867] usb 1-4: new low speed USB device using ohci_hcd and address 4
[   19.762724] usb 1-4: configuration #1 chosen from 1 choice
[   19.772517] usbcore: registered new interface driver libusual
[   19.772614] usbcore: registered new interface driver hiddev
[   19.780500] Initializing USB Mass Storage driver...
[   19.781772] input: Microsoft Basic Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb1/1-3/1-3:1.0/input/input1
[   19.785152] scsi6 : SCSI emulation for USB Mass Storage devices
[   19.785942] usb-storage: device found at 5
[   19.785946] usb-storage: waiting for device to settle before scanning
[   19.788536] input,hidraw0: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:02.0-3
[   19.794772] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb1/1-4/1-4:1.0/input/input2
[   19.808435] input,hidraw1: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:02.0-4
[   19.808455] usbcore: registered new interface driver usbhid
[   19.808459] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   19.808555] usbcore: registered new interface driver usb-storage
[   19.808558] USB Mass Storage support registered.
[   20.710895] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0011d8000064e830]
[   20.749044] Attempting manual resume
[   20.749049] swsusp: Resume From Partition 8:21
[   20.749051] PM: Checking swsusp image.
[   20.749228] PM: Resume from disk failed.
[   20.814572] kjournald starting.  Commit interval 5 seconds
[   20.814584] EXT3-fs: mounted filesystem with ordered data mode.
[   24.775819] usb-storage: device scan complete
[   24.780554] scsi 6:0:0:0: Direct-Access     GENERIC  USB Storage-SMC  I19B PQ: 0 ANSI: 0 CCS
[   24.784649] scsi 6:0:0:1: Direct-Access     GENERIC  USB Storage-CFC  I19B PQ: 0 ANSI: 0 CCS
[   24.789542] scsi 6:0:0:2: Direct-Access     GENERIC  USB Storage-SDC  I19B PQ: 0 ANSI: 0 CCS
[   24.793527] scsi 6:0:0:3: Direct-Access     GENERIC  USB Storage-MSC  I19B PQ: 0 ANSI: 0 CCS
[   24.797916] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[   24.797946] sd 6:0:0:0: Attached scsi generic sg3 type 0
[   24.801902] sd 6:0:0:1: [sdd] Attached SCSI removable disk
[   24.801931] sd 6:0:0:1: Attached scsi generic sg4 type 0
[   24.805892] sd 6:0:0:2: [sde] Attached SCSI removable disk
[   24.805918] sd 6:0:0:2: Attached scsi generic sg5 type 0
[   24.809898] sd 6:0:0:3: [sdf] Attached SCSI removable disk
[   24.809930] sd 6:0:0:3: Attached scsi generic sg6 type 0
[   28.741152] input: PC Speaker as /devices/platform/pcspkr/input/input3
[   28.990609] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   29.056192] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   29.242674] parport_pc 00:08: reported by Plug and Play ACPI
[   29.242699] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[   29.459505] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00
[   29.459523] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40
[   29.477299] input: Power Button (FF) as /devices/virtual/input/input4
[   29.507398] ACPI: Power Button (FF) [PWRF]
[   29.507473] input: Power Button (CM) as /devices/virtual/input/input5
[   29.539325] ACPI: Power Button (CM) [PWRB]
[   30.761478] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[   30.761489] ACPI: PCI Interrupt 0000:05:04.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 21
[   30.817405] phy0: Selected rate control algorithm 'simple'
[   31.905008] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
[   31.905015] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 22 (level, low) -> IRQ 17
[   31.905037] PCI: Setting latency timer of device 0000:00:04.0 to 64
[   32.150718] Linux agpgart interface v0.102
[   32.226550] intel8x0_measure_ac97_clock: measured 54790 usecs
[   32.226555] intel8x0: clocking to 46962
[   32.605781] usbcore: registered new interface driver snd-usb-audio
[   34.027616] udev: renamed network interface wlan0 to wlan1
[   34.846116] loop: module loaded
[   34.929956] lp0: using parport0 (interrupt-driven).
[   35.125459] wlan1: Initial auth_alg=0
[   35.125465] wlan1: authenticate with AP 00:1a:6b:ca:70:6e
[   35.127043] wlan1: RX authentication from 00:1a:6b:ca:70:6e (alg=0 transaction=2 status=0)
[   35.127045] wlan1: authenticated
[   35.127048] wlan1: associate with AP 00:1a:6b:ca:70:6e
[   35.129657] wlan1: RX AssocResp from 00:1a:6b:ca:70:6e (capab=0x411 status=0 aid=1)
[   35.129662] wlan1: associated
[   35.129666] wlan1: switched to short barker preamble (BSSID=00:1a:6b:ca:70:6e)
[   35.129697] wlan1: WMM queue=2 aci=0 acm=0 aifs=3 cWmin=15 cWmax=1023 burst=0
[   35.129700] wlan1: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0
[   35.129703] wlan1: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30
[   35.129706] wlan1: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15
[   35.347956] Linux video capture interface: v2.00
[   35.391948] quickcam [53.048265]: ----------LOADING QUICKCAM MODULE------------
[   35.391953] quickcam [53.048271]: struct quickcam size: 4752
[   35.391989] quickcam: QuickCam USB camera found (driver version QuickCam Messenger/Communicate USB 1.7 $Date: 2007/09/02 00:00:00 $)
[   35.391995] quickcam: Kernel:2.6.24-17-generic bus:1 class:FF subclass:FF vendor:046D product:08F5
[   35.392001] quickcam [53.048320]: poisoning qc in qc_usb_init
[   35.399695] quickcam [53.056025]: E00A contains 08F5
[   35.399700] quickcam: Sensor VV6450 detected
[   35.402898] input: Quickcam snapshot button as /devices/virtual/input/input6
[   35.415442] NET: Registered protocol family 10
[   35.415684] lo: Disabled Privacy Extensions
[   35.421014] quickcam [53.077382]: Quickcam snapshot button registered on usb-0000:00:02.0-1/input0
[   35.421039] quickcam: Registered device: /dev/video0
[   35.421062] usbcore: registered new interface driver quickcam
[   35.966338] Adding 1510068k swap on /dev/sdb5.  Priority:-1 extents:1 across:1510068k
[   36.958207] EXT3 FS on sdb7, internal journal
[   38.359745] kjournald starting.  Commit interval 5 seconds
[   38.359880] EXT3 FS on sdb8, internal journal
[   38.359885] EXT3-fs: mounted filesystem with ordered data mode.
[   39.643495] ip_tables: (C) 2000-2006 Netfilter Core Team
[   41.618149] No dock devices found.
[   42.213812] powernow-k8: Found 1 AMD Sempron(tm) Processor 3000+ processors (1 cpu cores) (version 2.20.00)
[   42.213851] powernow-k8:    0 : fid 0xa (1800 MHz), vid 0x6
[   42.213853] powernow-k8:    1 : fid 0x2 (1000 MHz), vid 0x12
[   46.325668] eth0: no link during initialization.
[   46.326062] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   46.361670] wlan1: no IPv6 routers present
[   85.317542] Marking TSC unstable due to: cpufreq changes.
[   85.333156] Time: acpi_pm clocksource has been installed.
[   85.895913] Clocksource tsc unstable (delta = -222238829 ns)
[   87.582683] ppdev: user-space parallel port driver
[   88.590906] audit(1210532588.159:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5615 profile="/usr/sbin/cupsd" namespace="default"
jeremy@unknown-system:~$

Dernière modification par Ski-lleR (Le 11/05/2008, à 21:13)

Ski-lleR · Le 12/05/2008, à 00:00

Je crois que j'ai trouvé le pourquoi du comment, enfin il me semble

Regarder cette capture>

On voit clairement qu'il reste un peu plus de 10% de libre dans /home, seulement pour /jeremy c'est plein, donc j'en conclus que le reste est réservé par le système ? Si oui et si c'est bien ça comment baisser cette limite ?

Ski-lleR · Le 12/05/2008, à 09:52

En parallèe j'avais poster sur un forum américain. On m'a dit que peut être j'était en rupture d'inode ^^

Donc on m'a dit tape df -ih, et voici le résultat:

jeremy@unknown-system:~$ df -ih
Sys. de fich. Inodes IUtil. ILib. %IUti. Monté sur
/dev/sdb7 1,2M 185K 1011K 16% /
varrun 63K 43 63K 1% /var/run
varlock 63K 1 63K 1% /var/lock
udev 63K 3,1K 60K 5% /dev
devshm 63K 3 63K 1% /dev/shm
lrm 63K 18 63K 1% /lib/modules/2.6.24-17-generic/volatile
/dev/sdb6 48K 59 48K 1% /boot
/dev/sdb8 14K 14K 20 100% /home
gvfs-fuse-daemon 1,2M 185K 1011K 16% /home/jeremy/.gvfs

100% utilisé sur /home, là je cherche comment résoudre le problème, mais au cas ou je trouverais pas, ça serait cool de me dire comment le faire

Vysserk3 · Le 12/05/2008, à 10:40

Avec l'analyseur de disque, essaye de chercher les sous-répertoires qui contiennent le plus grand pourcentage pour savoir quels fichiers sont en causes

@++

Ski-lleR · Le 12/05/2008, à 10:52

Bah en fait quand j'ai installer ubuntu j'ai mis large file je crois comme option pour ma partition /home, donc les inodes se remplisse très vite...

En plus apparement le seul moyen d'augementer les inodes c'est de formater la partition...

Pffff stéchec....

Hoper · Le 12/05/2008, à 10:56

Whaou..... Alors la j'avoue que ca m'était pas venu à l'esprit... Je crois que c'est la première fois que je vois ca en vrai.
Pus d'inode dispos !? Soit le système de fichier à été crée avec des paramètres bizaroides, soit tu dois avoir une quantité incroyable de fichiers minuscules...

A mon avis la solution serait de tout copier ailleur (disque externe ?) puis de reformater ta partition, soit toujours en ext3 mais avec de bons paramètres, soit en reiserfs (ou la tu n'aurai plus jamais de problèmes d'inodes).

Ski-lleR · Le 12/05/2008, à 11:07

Justement non j'ai pas beaucoup de petit fichier, car à par regarder des films, écouter de la musique, faire un peu de retouche d'image, de l'émulation, un peu de bureautique et de la programmation (sachant que mes sources sont sur hdd externes > plus sur), j'ai très peu de chose installé (adieu xp au passage, tu ne me manque pas ).

Ca vient du paramètre large file, comme j'ai un home de 54 go qui me sert à stocker je m'étais dit ça va peut être servir, quel erreur...

En fait j'aurais du faire une partition à part pour stocker, car là tous les petits fichiers de home remplisse les inodes très vite à cause de large file

Oui c'est ce que je vais faire tout copier sur hdd externe, enfin pour le moment je l'ai pas mais je le récupère bientôt. Comme ça je formate home et je sépare la partition en 2

Merci encore à tous vous votre aide et vos conseils

Dernière modification par Ski-lleR (Le 12/05/2008, à 11:10)

tylhdar · Le 12/05/2008, à 12:36

Comme ça je formate home et je sépare la partition en 2

ou alors tu formate avec les paramètre normaux...

édit: accent

Dernière modification par tylhdar (Le 12/06/2008, à 01:50)

Ski-lleR · Le 12/05/2008, à 12:54

C'est sur je vais formatter en normal, je veux plus de cette histoire d'inode ^^

Mais bon tant qu'à faire autant mettre mes données perso sur une partitions à part, les données de configurations n'étant pas vraiment importante pour moi (pour le peu de logiciel que j'utilise)

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 11/05/2008, à 08:20

[Résolu] (attention au inode!) Disque plein ???

#2 Le 11/05/2008, à 08:31

Re : [Résolu] (attention au inode!) Disque plein ???

#3 Le 11/05/2008, à 09:13

Re : [Résolu] (attention au inode!) Disque plein ???

#4 Le 11/05/2008, à 11:15

Re : [Résolu] (attention au inode!) Disque plein ???

#5 Le 11/05/2008, à 19:38

Re : [Résolu] (attention au inode!) Disque plein ???

#6 Le 11/05/2008, à 20:56

Re : [Résolu] (attention au inode!) Disque plein ???

#7 Le 11/05/2008, à 21:10

Re : [Résolu] (attention au inode!) Disque plein ???

#8 Le 12/05/2008, à 00:00

Re : [Résolu] (attention au inode!) Disque plein ???

#9 Le 12/05/2008, à 09:52

Re : [Résolu] (attention au inode!) Disque plein ???

#10 Le 12/05/2008, à 10:40

Re : [Résolu] (attention au inode!) Disque plein ???

#11 Le 12/05/2008, à 10:52

Re : [Résolu] (attention au inode!) Disque plein ???

#12 Le 12/05/2008, à 10:56

Re : [Résolu] (attention au inode!) Disque plein ???

#13 Le 12/05/2008, à 11:07

Re : [Résolu] (attention au inode!) Disque plein ???

#14 Le 12/05/2008, à 12:36

Re : [Résolu] (attention au inode!) Disque plein ???

#15 Le 12/05/2008, à 12:54

Re : [Résolu] (attention au inode!) Disque plein ???

Pied de page des forums