#1 Le 16/09/2014, à 08:45
- atis
"ata bus error" lors du boot avec ubuntu 14.04
Bonjour,
J'ai installé Ubuntu 14.04 il y a quelque jours sur un pc équipé ainsi :
CM : Asrock 960GM/U3S3 FX (neuve)
CPU : Athlon II X3 450 à 3.2Ghz (neuve)
Disque : SSD intel SSDSC2CT24 de 240Go, sata 3 (1 an)
Ubuntu fonctionne très bien, mais lorsque j'allume le pc, le premier boot est très lent. Lorsque je fais un simple redémarrage, il n'y a aucun problème. Voici le résultat de la commande
sudo dmesg[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.0-35-generic (buildd@panlong) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #62-Ubuntu SMP Fri Aug 15 01:58:42 UTC 2014 (Ubuntu 3.13.0-35.62-generic 3.13.11.6)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-35-generic root=UUID=bb0a7ab1-181d-4e5b-b800-f5bb98e05cce ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009c800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e6000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cff9ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cffa0000-0x00000000cffaffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cffb0000-0x00000000cffdffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cffe0000-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./960GM/U3S3 FX, BIOS P1.40 10/02/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x220000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000230000000 aka 8960M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcffa0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01fdf000, 0x01fdffff] PGTABLE
[ 0.000000] BRK [0x01fe0000, 0x01fe0fff] PGTABLE
[ 0.000000] BRK [0x01fe1000, 0x01fe1fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x21fe00000-0x21fffffff]
[ 0.000000] [mem 0x21fe00000-0x21fffffff] page 2M
[ 0.000000] BRK [0x01fe2000, 0x01fe2fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x21c000000-0x21fdfffff]
[ 0.000000] [mem 0x21c000000-0x21fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x21bffffff]
[ 0.000000] [mem 0x200000000-0x21bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xcff9ffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0xbfffffff] page 1G
[ 0.000000] [mem 0xc0000000-0xcfdfffff] page 2M
[ 0.000000] [mem 0xcfe00000-0xcff9ffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x35b64000-0x36da9fff]
[ 0.000000] ACPI: RSDP 00000000000fa700 000014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000cffa0000 000040 (v01 100213 RSDT1805 20131002 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000cffa0200 000084 (v01 A_M_I OEMFACP 12000601 MSFT 00000097)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20131115/tbfadt-603)
[ 0.000000] ACPI: DSDT 00000000cffa0460 008AFD (v01 AS618 AS618132 00000132 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000cffb0000 000040
[ 0.000000] ACPI: APIC 00000000cffa0390 00008C (v01 100213 APIC1805 20131002 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000cffa0420 00003C (v01 100213 OEMMCFG 20131002 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000cffb0040 000072 (v01 100213 OEMB1805 20131002 MSFT 00000097)
[ 0.000000] ACPI: AAFT 00000000cffaa460 00002E (v01 100213 OEMAAFT 20131002 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000cffaa490 000038 (v01 100213 OEMHPET 20131002 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000cffaa4d0 000696 (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x21fffffff]
[ 0.000000] NODE_DATA [mem 0x21fff9000-0x21fffdfff]
[ 0.000000] [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880217a00000-ffff88021f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x21fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009bfff]
[ 0.000000] node 0: [mem 0x00100000-0xcff9ffff]
[ 0.000000] node 0: [mem 0x100000000-0x21fffffff]
[ 0.000000] On node 0 totalpages: 2031419
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3995 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13247 pages used for memmap
[ 0.000000] DMA32 zone: 847776 pages, LIFO batch:31
[ 0.000000] Normal zone: 18432 pages used for memmap
[ 0.000000] Normal zone: 1179648 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 3, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 5 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e6000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcffa0000-0xcffaffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcffb0000-0xcffdffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcffe0000-0xcfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xffefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfff00000-0xffffffff]
[ 0.000000] e820: [mem 0xd0000000-0xffefffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88021fc00000 s86336 r8192 d24256 u262144
[ 0.000000] pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1999655
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-35-generic root=UUID=bb0a7ab1-181d-4e5b-b800-f5bb98e05cce ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 0 size 32 MB
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000
[ 0.000000] PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
[ 0.000000] Memory: 7830836K/8125676K available (7372K kernel code, 1144K rwdata, 3404K rodata, 1336K init, 1440K bss, 294840K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-7.
[ 0.000000] NR_IRQS:16640 nr_irqs:744 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 32505856 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 3206.382 MHz processor
[ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 6412.76 BogoMIPS (lpj=12825528)
[ 0.000006] pid_max: default: 32768 minimum: 301
[ 0.000031] Security Framework initialized
[ 0.000053] AppArmor: AppArmor initialized
[ 0.000054] Yama: becoming mindful.
[ 0.000558] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.003464] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.004849] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.004858] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.005139] Initializing cgroup subsys memory
[ 0.005147] Initializing cgroup subsys devices
[ 0.005148] Initializing cgroup subsys freezer
[ 0.005150] Initializing cgroup subsys blkio
[ 0.005151] Initializing cgroup subsys perf_event
[ 0.005154] Initializing cgroup subsys hugetlb
[ 0.005172] tseg: 0000000000
[ 0.005179] CPU: Physical Processor ID: 0
[ 0.005180] CPU: Processor Core ID: 0
[ 0.005182] mce: CPU supports 6 MCE banks
[ 0.005187] LVT offset 0 assigned for vector 0xf9
[ 0.005192] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
[ 0.005192] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64
[ 0.005192] tlb_flushall_shift: 4
[ 0.005281] Freeing SMP alternatives memory: 32K (ffffffff81e6d000 - ffffffff81e75000)
[ 0.005954] ACPI: Core revision 20131115
[ 0.007950] ACPI: All ACPI Tables successfully acquired
[ 0.014759] ftrace: allocating 28537 entries in 112 pages
[ 0.025369] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.065011] smpboot: CPU0: AMD Athlon(tm) II X3 450 Processor (fam: 10, model: 05, stepping: 03)
[ 0.171188] Performance Events: AMD PMU driver.
[ 0.171193] ... version: 0
[ 0.171194] ... bit width: 48
[ 0.171194] ... generic registers: 4
[ 0.171195] ... value mask: 0000ffffffffffff
[ 0.171196] ... max period: 00007fffffffffff
[ 0.171197] ... fixed-purpose events: 0
[ 0.171198] ... event mask: 000000000000000f
[ 0.172615] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.172687] x86: Booting SMP configuration:
[ 0.172689] .... node #0, CPUs: #1 #2
[ 0.198802] x86: Booted up 1 node, 3 CPUs
[ 0.198804] smpboot: Total of 3 processors activated (19238.29 BogoMIPS)
[ 0.199594] devtmpfs: initialized
[ 0.202936] EVM: security.selinux
[ 0.202937] EVM: security.SMACK64
[ 0.202938] EVM: security.ima
[ 0.202939] EVM: security.capability
[ 0.203063] PM: Registering ACPI NVS region [mem 0xcffb0000-0xcffdffff] (196608 bytes)
[ 0.203954] pinctrl core: initialized pinctrl subsystem
[ 0.204031] regulator-dummy: no parameters
[ 0.204056] RTC time: 23:02:27, date: 09/15/14
[ 0.204097] NET: Registered protocol family 16
[ 0.204203] cpuidle: using governor ladder
[ 0.204204] cpuidle: using governor menu
[ 0.204208] node 0 link 0: io port [1000, ffffff]
[ 0.204210] TOM: 00000000d0000000 aka 3328M
[ 0.204212] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[ 0.204214] node 0 link 0: mmio [a0000, bffff]
[ 0.204216] node 0 link 0: mmio [d0000000, efffffff] ==> [d0000000, dfffffff]
[ 0.204218] node 0 link 0: mmio [f0000000, fe7fffff]
[ 0.204219] node 0 link 0: mmio [fe800000, fe9fffff]
[ 0.204220] node 0 link 0: mmio [fea00000, ffafffff]
[ 0.204222] TOM2: 0000000230000000 aka 8960M
[ 0.204223] bus: [bus 00-1f] on node 0 link 0
[ 0.204224] bus: 00 [io 0x0000-0xffff]
[ 0.204225] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.204226] bus: 00 [mem 0xd0000000-0xdfffffff]
[ 0.204227] bus: 00 [mem 0xf0000000-0xffffffff]
[ 0.204228] bus: 00 [mem 0x230000000-0xfcffffffff]
[ 0.204282] ACPI: bus type PCI registered
[ 0.204284] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.204340] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.204342] PCI: not using MMCONFIG
[ 0.204343] PCI: Using configuration type 1 for base access
[ 0.204344] PCI: Using configuration type 1 for extended access
[ 0.204524] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.204524] mtrr: probably your BIOS does not setup all CPUs.
[ 0.204525] mtrr: corrected configuration.
[ 0.205337] bio: create slab <bio-0> at 0
[ 0.205525] ACPI: Added _OSI(Module Device)
[ 0.205526] ACPI: Added _OSI(Processor Device)
[ 0.205527] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.205528] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.207003] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.208964] ACPI: Interpreter enabled
[ 0.208973] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.208986] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.208988] ACPI: Using IOAPIC for interrupt routing
[ 0.209007] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.209599] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.217098] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.217183] ACPI: No dock devices found.
[ 0.221082] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.221088] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.221238] acpi PNP0A03:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.221373] acpi PNP0A03:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.221620] PCI host bridge to bus 0000:00
[ 0.221622] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.221623] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.221625] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.221626] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.221628] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 0.221629] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xdfffffff]
[ 0.221631] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
[ 0.221640] pci 0000:00:00.0: [1022:9600] type 00 class 0x060000
[ 0.221729] pci 0000:00:01.0: [1849:9602] type 01 class 0x060400
[ 0.221799] pci 0000:00:05.0: [1022:9605] type 01 class 0x060400
[ 0.221826] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.221859] pci 0000:00:05.0: System wakeup disabled by ACPI
[ 0.221882] pci 0000:00:06.0: [1022:9606] type 01 class 0x060400
[ 0.221908] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.221942] pci 0000:00:06.0: System wakeup disabled by ACPI
[ 0.221964] pci 0000:00:07.0: [1022:9607] type 01 class 0x060400
[ 0.221990] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.222022] pci 0000:00:07.0: System wakeup disabled by ACPI
[ 0.222061] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[ 0.222079] pci 0000:00:11.0: reg 0x10: [io 0xa000-0xa007]
[ 0.222088] pci 0000:00:11.0: reg 0x14: [io 0x9000-0x9003]
[ 0.222096] pci 0000:00:11.0: reg 0x18: [io 0x8000-0x8007]
[ 0.222105] pci 0000:00:11.0: reg 0x1c: [io 0x7000-0x7003]
[ 0.222113] pci 0000:00:11.0: reg 0x20: [io 0x6000-0x600f]
[ 0.222122] pci 0000:00:11.0: reg 0x24: [mem 0xfe7ffc00-0xfe7fffff]
[ 0.222213] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.222225] pci 0000:00:12.0: reg 0x10: [mem 0xfe7fe000-0xfe7fefff]
[ 0.222304] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.222327] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
[ 0.222339] pci 0000:00:12.1: reg 0x10: [mem 0xfe7fd000-0xfe7fdfff]
[ 0.222418] pci 0000:00:12.1: System wakeup disabled by ACPI
[ 0.222446] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.222463] pci 0000:00:12.2: reg 0x10: [mem 0xfe7ff800-0xfe7ff8ff]
[ 0.222538] pci 0000:00:12.2: supports D1 D2
[ 0.222540] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.222575] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.222610] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.222622] pci 0000:00:13.0: reg 0x10: [mem 0xfe7fc000-0xfe7fcfff]
[ 0.222701] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.222722] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
[ 0.222734] pci 0000:00:13.1: reg 0x10: [mem 0xfe7fb000-0xfe7fbfff]
[ 0.222813] pci 0000:00:13.1: System wakeup disabled by ACPI
[ 0.222840] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.222858] pci 0000:00:13.2: reg 0x10: [mem 0xfe7ff400-0xfe7ff4ff]
[ 0.222933] pci 0000:00:13.2: supports D1 D2
[ 0.222934] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.222971] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.223001] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.223139] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
[ 0.223154] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
[ 0.223162] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
[ 0.223170] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
[ 0.223179] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
[ 0.223187] pci 0000:00:14.1: reg 0x20: [io 0xff00-0xff0f]
[ 0.223278] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.223297] pci 0000:00:14.2: reg 0x10: [mem 0xfe7f4000-0xfe7f7fff 64bit]
[ 0.223358] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.223391] pci 0000:00:14.2: System wakeup disabled by ACPI
[ 0.223413] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.223519] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.223577] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.223600] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.223612] pci 0000:00:14.5: reg 0x10: [mem 0xfe7fa000-0xfe7fafff]
[ 0.223691] pci 0000:00:14.5: System wakeup disabled by ACPI
[ 0.223716] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[ 0.223766] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[ 0.223811] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[ 0.223857] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[ 0.223905] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[ 0.223991] pci 0000:01:05.0: [1002:9616] type 00 class 0x030000
[ 0.223998] pci 0000:01:05.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref]
[ 0.224002] pci 0000:01:05.0: reg 0x14: [io 0xb000-0xb0ff]
[ 0.224006] pci 0000:01:05.0: reg 0x18: [mem 0xfe9f0000-0xfe9fffff]
[ 0.224014] pci 0000:01:05.0: reg 0x24: [mem 0xfe800000-0xfe8fffff]
[ 0.224028] pci 0000:01:05.0: supports D1 D2
[ 0.224053] pci 0000:01:05.1: [1002:960f] type 00 class 0x040300
[ 0.224060] pci 0000:01:05.1: reg 0x10: [mem 0xfe9e8000-0xfe9ebfff]
[ 0.224086] pci 0000:01:05.1: supports D1 D2
[ 0.224135] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.224137] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
[ 0.224140] pci 0000:00:01.0: bridge window [mem 0xfe800000-0xfe9fffff]
[ 0.224142] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.224179] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.224191] pci 0000:02:00.0: reg 0x10: [io 0xc800-0xc8ff]
[ 0.224209] pci 0000:02:00.0: reg 0x18: [mem 0xfdfff000-0xfdffffff 64bit pref]
[ 0.224221] pci 0000:02:00.0: reg 0x20: [mem 0xfdff8000-0xfdffbfff 64bit pref]
[ 0.224271] pci 0000:02:00.0: supports D1 D2
[ 0.224272] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.231148] pci 0000:00:05.0: PCI bridge to [bus 02]
[ 0.231155] pci 0000:00:05.0: bridge window [io 0xc000-0xcfff]
[ 0.231160] pci 0000:00:05.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.231228] pci 0000:03:00.0: [1b21:0612] type 00 class 0x010601
[ 0.231239] pci 0000:03:00.0: reg 0x10: [io 0xe800-0xe807]
[ 0.231246] pci 0000:03:00.0: reg 0x14: [io 0xe400-0xe403]
[ 0.231253] pci 0000:03:00.0: reg 0x18: [io 0xe000-0xe007]
[ 0.231260] pci 0000:03:00.0: reg 0x1c: [io 0xd800-0xd803]
[ 0.231267] pci 0000:03:00.0: reg 0x20: [io 0xd400-0xd41f]
[ 0.231274] pci 0000:03:00.0: reg 0x24: [mem 0xfeaffc00-0xfeaffdff]
[ 0.239136] pci 0000:00:06.0: PCI bridge to [bus 03]
[ 0.239143] pci 0000:00:06.0: bridge window [io 0xd000-0xefff]
[ 0.239145] pci 0000:00:06.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.239212] pci 0000:04:00.0: [1b6f:7023] type 00 class 0x0c0330
[ 0.239227] pci 0000:04:00.0: reg 0x10: [mem 0xfebf8000-0xfebfffff 64bit]
[ 0.239291] pci 0000:04:00.0: supports D1 D2
[ 0.239293] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.247128] pci 0000:00:07.0: PCI bridge to [bus 04]
[ 0.247136] pci 0000:00:07.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.247223] pci 0000:00:14.4: PCI bridge to [bus 05] (subtractive decode)
[ 0.247232] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.247234] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.247235] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.247237] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.247238] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode)
[ 0.247239] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 0.247686] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 12 14 15)
[ 0.247721] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 12 14 15)
[ 0.247753] ACPI: PCI Interrupt Link [LNKC] (IRQs *10 12 14 15)
[ 0.247783] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 *11 12 14 15)
[ 0.247814] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 10 11 12 14 15) *0, disabled.
[ 0.247845] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 10 11 12 14 15) *0, disabled.
[ 0.247877] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 10 *11 12 14 15)
[ 0.247907] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.248024] ACPI: Enabled 1 GPEs in block 00 to 1F
[ 0.248029] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.248053] Found 1 acpi root devices
[ 0.248174] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.248176] vgaarb: loaded
[ 0.248177] vgaarb: bridge control possible 0000:01:05.0
[ 0.248326] SCSI subsystem initialized
[ 0.248406] libata version 3.00 loaded.
[ 0.248423] ACPI: bus type USB registered
[ 0.248436] usbcore: registered new interface driver usbfs
[ 0.248442] usbcore: registered new interface driver hub
[ 0.248579] usbcore: registered new device driver usb
[ 0.248810] PCI: Using ACPI for IRQ routing
[ 0.256794] PCI: pci_cache_line_size set to 64 bytes
[ 0.256850] e820: reserve RAM buffer [mem 0x0009c800-0x0009ffff]
[ 0.256852] e820: reserve RAM buffer [mem 0xcffa0000-0xcfffffff]
[ 0.256949] NetLabel: Initializing
[ 0.256950] NetLabel: domain hash size = 128
[ 0.256950] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.256959] NetLabel: unlabeled traffic allowed by default
[ 0.257060] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.257064] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.259129] Switched to clocksource hpet
[ 0.263527] AppArmor: AppArmor Filesystem Enabled
[ 0.263558] pnp: PnP ACPI init
[ 0.263572] ACPI: bus type PNP registered
[ 0.263723] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.263759] pnp 00:01: [dma 4]
[ 0.263773] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.263804] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.263821] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.263841] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.264109] pnp 00:05: [dma 3]
[ 0.264183] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.264257] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.264326] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.264328] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.264330] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.264477] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.264479] system 00:08: [io 0x040b] has been reserved
[ 0.264480] system 00:08: [io 0x04d6] has been reserved
[ 0.264482] system 00:08: [io 0x0c00-0x0c01] has been reserved
[ 0.264483] system 00:08: [io 0x0c14] has been reserved
[ 0.264485] system 00:08: [io 0x0c50-0x0c51] has been reserved
[ 0.264486] system 00:08: [io 0x0c52] has been reserved
[ 0.264488] system 00:08: [io 0x0c6c] has been reserved
[ 0.264489] system 00:08: [io 0x0c6f] has been reserved
[ 0.264491] system 00:08: [io 0x0cd0-0x0cd1] has been reserved
[ 0.264492] system 00:08: [io 0x0cd2-0x0cd3] has been reserved
[ 0.264494] system 00:08: [io 0x0cd4-0x0cd5] has been reserved
[ 0.264495] system 00:08: [io 0x0cd6-0x0cd7] has been reserved
[ 0.264497] system 00:08: [io 0x0cd8-0x0cdf] has been reserved
[ 0.264498] system 00:08: [io 0x0800-0x089f] could not be reserved
[ 0.264500] system 00:08: [io 0x0b00-0x0b0f] has been reserved
[ 0.264501] system 00:08: [io 0x0b20-0x0b3f] has been reserved
[ 0.264503] system 00:08: [io 0x0900-0x090f] has been reserved
[ 0.264504] system 00:08: [io 0x0910-0x091f] has been reserved
[ 0.264506] system 00:08: [io 0xfe00-0xfefe] has been reserved
[ 0.264508] system 00:08: [mem 0xffb80000-0xffbfffff] has been reserved
[ 0.264509] system 00:08: [mem 0xfec10000-0xfec1001f] has been reserved
[ 0.264511] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.264665] pnp 00:09: [dma 0 disabled]
[ 0.264703] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.264759] system 00:0a: [io 0x0290-0x029f] has been reserved
[ 0.264761] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.264801] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.264804] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.264940] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.264942] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.264944] system 00:0c: [mem 0x00100000-0xcfffffff] could not be reserved
[ 0.264946] system 00:0c: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.264947] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.265022] pnp: PnP ACPI: found 13 devices
[ 0.265023] ACPI: bus type PNP unregistered
[ 0.271228] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.271232] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
[ 0.271235] pci 0000:00:01.0: bridge window [mem 0xfe800000-0xfe9fffff]
[ 0.271237] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.271240] pci 0000:00:05.0: PCI bridge to [bus 02]
[ 0.271242] pci 0000:00:05.0: bridge window [io 0xc000-0xcfff]
[ 0.271245] pci 0000:00:05.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.271247] pci 0000:00:06.0: PCI bridge to [bus 03]
[ 0.271249] pci 0000:00:06.0: bridge window [io 0xd000-0xefff]
[ 0.271251] pci 0000:00:06.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.271255] pci 0000:00:07.0: PCI bridge to [bus 04]
[ 0.271257] pci 0000:00:07.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.271260] pci 0000:00:14.4: PCI bridge to [bus 05]
[ 0.271271] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.271273] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.271274] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.271275] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.271277] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.271278] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.271280] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
[ 0.271281] pci_bus 0000:01: resource 1 [mem 0xfe800000-0xfe9fffff]
[ 0.271283] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.271284] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
[ 0.271286] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.271287] pci_bus 0000:03: resource 0 [io 0xd000-0xefff]
[ 0.271289] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.271291] pci_bus 0000:04: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.271292] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.271294] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.271295] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.271296] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.271298] pci_bus 0000:05: resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.271300] pci_bus 0000:05: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.271333] NET: Registered protocol family 2
[ 0.271510] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.271746] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.272092] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.272149] TCP: reno registered
[ 0.272160] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.272220] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.272357] NET: Registered protocol family 1
[ 0.272371] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[ 0.714766] pci 0000:01:05.0: Boot video device
[ 0.714978] PCI: CLS 64 bytes, default 64
[ 0.715037] Trying to unpack rootfs image as initramfs...
[ 0.978069] Freeing initrd memory: 18712K (ffff880035b64000 - ffff880036daa000)
[ 0.978353] PCI-DMA: Disabling AGP.
[ 0.978440] PCI-DMA: aperture base @ c4000000 size 65536 KB
[ 0.978441] PCI-DMA: using GART IOMMU.
[ 0.978444] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.980994] LVT offset 1 assigned for vector 0x400
[ 0.981006] IBS: LVT offset 1 assigned
[ 0.981041] perf: AMD IBS detected (0x0000001f)
[ 0.981095] microcode: CPU0: patch_level=0x010000c8
[ 0.981101] microcode: CPU1: patch_level=0x010000c8
[ 0.981128] microcode: CPU2: patch_level=0x010000c8
[ 0.981214] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.981216] Scanning for low memory corruption every 60 seconds
[ 0.981465] Initialise system trusted keyring
[ 0.981508] audit: initializing netlink socket (disabled)
[ 0.981520] type=2000 audit(1410822147.876:1): initialized
[ 1.002319] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.003620] zbud: loaded
[ 1.003855] VFS: Disk quotas dquot_6.5.2
[ 1.003905] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.004446] fuse init (API version 7.22)
[ 1.004564] msgmni has been set to 15460
[ 1.004621] Key type big_key registered
[ 1.005257] Key type asymmetric registered
[ 1.005260] Asymmetric key parser 'x509' registered
[ 1.005324] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.005432] io scheduler noop registered
[ 1.005436] io scheduler deadline registered (default)
[ 1.005482] io scheduler cfq registered
[ 1.005684] pcieport 0000:00:05.0: irq 40 for MSI/MSI-X
[ 1.005790] pcieport 0000:00:06.0: irq 41 for MSI/MSI-X
[ 1.005826] pcieport 0000:00:07.0: irq 42 for MSI/MSI-X
[ 1.005867] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.005877] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.005905] vesafb: mode is 1400x1050x32, linelength=5632, pages=0
[ 1.005907] vesafb: scrolling: redraw
[ 1.005908] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 1.006108] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90010e80000, using 5824k, total 5824k
[ 1.183619] Console: switching to colour frame buffer device 175x65
[ 1.360144] fb0: VESA VGA frame buffer device
[ 1.360210] ipmi message handler version 39.2
[ 1.360306] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 1.360309] ACPI: Power Button [PWRB]
[ 1.360336] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.360338] ACPI: Power Button [PWRF]
[ 1.360438] GHES: HEST is not enabled!
[ 1.360546] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.380985] 00:09: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.382205] Linux agpgart interface v0.103
[ 1.383445] brd: module loaded
[ 1.384315] loop: module loaded
[ 1.384623] libphy: Fixed MDIO Bus: probed
[ 1.384685] tun: Universal TUN/TAP device driver, 1.6
[ 1.384686] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.384777] PPP generic driver version 2.4.2
[ 1.384857] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.384861] ehci-pci: EHCI PCI platform driver
[ 1.385000] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.385005] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.385009] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.385019] ehci-pci 0000:00:12.2: debug port 1
[ 1.385062] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe7ff800
[ 1.393882] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.394182] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.394186] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.394188] usb usb1: Product: EHCI Host Controller
[ 1.394189] usb usb1: Manufacturer: Linux 3.13.0-35-generic ehci_hcd
[ 1.394190] usb usb1: SerialNumber: 0000:00:12.2
[ 1.394404] hub 1-0:1.0: USB hub found
[ 1.394448] hub 1-0:1.0: 6 ports detected
[ 1.395036] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.395043] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.395046] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.395057] ehci-pci 0000:00:13.2: debug port 1
[ 1.395098] ehci-pci 0000:00:13.2: irq 19, io mem 0xfe7ff400
[ 1.405863] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.405917] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.405919] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.405921] usb usb2: Product: EHCI Host Controller
[ 1.405922] usb usb2: Manufacturer: Linux 3.13.0-35-generic ehci_hcd
[ 1.405923] usb usb2: SerialNumber: 0000:00:13.2
[ 1.406058] hub 2-0:1.0: USB hub found
[ 1.406063] hub 2-0:1.0: 6 ports detected
[ 1.406170] ehci-platform: EHCI generic platform driver
[ 1.406182] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.406183] ohci-pci: OHCI PCI platform driver
[ 1.406303] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 1.406308] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 1.406332] ohci-pci 0000:00:12.0: irq 16, io mem 0xfe7fe000
[ 1.465808] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.465811] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.465812] usb usb3: Product: OHCI PCI host controller
[ 1.465814] usb usb3: Manufacturer: Linux 3.13.0-35-generic ohci_hcd
[ 1.465815] usb usb3: SerialNumber: 0000:00:12.0
[ 1.465951] hub 3-0:1.0: USB hub found
[ 1.465959] hub 3-0:1.0: 3 ports detected
[ 1.466141] ohci-pci 0000:00:12.1: OHCI PCI host controller
[ 1.466146] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 1.466161] ohci-pci 0000:00:12.1: irq 16, io mem 0xfe7fd000
[ 1.525733] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.525736] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.525737] usb usb4: Product: OHCI PCI host controller
[ 1.525739] usb usb4: Manufacturer: Linux 3.13.0-35-generic ohci_hcd
[ 1.525740] usb usb4: SerialNumber: 0000:00:12.1
[ 1.525877] hub 4-0:1.0: USB hub found
[ 1.525885] hub 4-0:1.0: 3 ports detected
[ 1.526063] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.526068] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.526090] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe7fc000
[ 1.585664] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.585668] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.585669] usb usb5: Product: OHCI PCI host controller
[ 1.585670] usb usb5: Manufacturer: Linux 3.13.0-35-generic ohci_hcd
[ 1.585671] usb usb5: SerialNumber: 0000:00:13.0
[ 1.585807] hub 5-0:1.0: USB hub found
[ 1.585815] hub 5-0:1.0: 3 ports detected
[ 1.585998] ohci-pci 0000:00:13.1: OHCI PCI host controller
[ 1.586003] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 1.586019] ohci-pci 0000:00:13.1: irq 18, io mem 0xfe7fb000
[ 1.645598] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.645602] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.645604] usb usb6: Product: OHCI PCI host controller
[ 1.645605] usb usb6: Manufacturer: Linux 3.13.0-35-generic ohci_hcd
[ 1.645606] usb usb6: SerialNumber: 0000:00:13.1
[ 1.645722] hub 6-0:1.0: USB hub found
[ 1.645730] hub 6-0:1.0: 3 ports detected
[ 1.645909] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 1.645915] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 1.645930] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe7fa000
[ 1.705533] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.705541] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.705543] usb usb7: Product: OHCI PCI host controller
[ 1.705544] usb usb7: Manufacturer: Linux 3.13.0-35-generic ohci_hcd
[ 1.705545] usb usb7: SerialNumber: 0000:00:14.5
[ 1.705694] hub 7-0:1.0: USB hub found
[ 1.705706] hub 7-0:1.0: 2 ports detected
[ 1.705776] ohci-platform: OHCI generic platform driver
[ 1.705786] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.705929] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 1.705934] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 8
[ 1.706032] xhci_hcd 0000:04:00.0: irq 43 for MSI/MSI-X
[ 1.706088] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.706089] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.706091] usb usb8: Product: xHCI Host Controller
[ 1.706092] usb usb8: Manufacturer: Linux 3.13.0-35-generic xhci_hcd
[ 1.706093] usb usb8: SerialNumber: 0000:04:00.0
[ 1.706199] hub 8-0:1.0: USB hub found
[ 1.706206] hub 8-0:1.0: 2 ports detected
[ 1.706261] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 1.706263] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 9
[ 1.706289] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.706291] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.706292] usb usb9: Product: xHCI Host Controller
[ 1.706294] usb usb9: Manufacturer: Linux 3.13.0-35-generic xhci_hcd
[ 1.706295] usb usb9: SerialNumber: 0000:04:00.0
[ 1.706386] hub 9-0:1.0: USB hub found
[ 1.706392] hub 9-0:1.0: 2 ports detected
[ 1.713614] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.716259] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.716269] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.716393] mousedev: PS/2 mouse device common for all mice
[ 1.716546] rtc_cmos 00:02: RTC can wake from S4
[ 1.716689] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.716715] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.716782] device-mapper: uevent: version 1.0.3
[ 1.716858] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 1.716865] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.716947] TCP: cubic registered
[ 1.717015] NET: Registered protocol family 10
[ 1.717154] NET: Registered protocol family 17
[ 1.717163] Key type dns_resolver registered
[ 1.717409] Loading compiled-in X.509 certificates
[ 1.718274] Loaded X.509 cert 'Magrathea: Glacier signing key: b1414ae96c1b0ebb7c141fa405c1f6c98e8a66f0'
[ 1.718293] registered taskstats version 1
[ 1.720716] Key type trusted registered
[ 1.722896] Key type encrypted registered
[ 1.724994] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.725000] IMA: No TPM chip found, activating TPM-bypass!
[ 1.725231] regulator-dummy: disabling
[ 1.725334] Magic number: 14:547:49
[ 1.725494] rtc_cmos 00:02: setting system clock to 2014-09-15 23:02:29 UTC (1410822149)
[ 1.725656] acpi-cpufreq: overriding BIOS provided _PSD data
[ 1.725760] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.725762] EDD information not available.
[ 1.725783] PM: Hibernation image not present or could not be loaded.
[ 1.727137] Freeing unused kernel memory: 1336K (ffffffff81d1f000 - ffffffff81e6d000)
[ 1.727140] Write protecting the kernel read-only data: 12288k
[ 1.729149] Freeing unused kernel memory: 808K (ffff880001736000 - ffff880001800000)
[ 1.730822] Freeing unused kernel memory: 692K (ffff880001b53000 - ffff880001c00000)
[ 1.746947] systemd-udevd[116]: starting version 204
[ 1.767828] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.768054] r8169 0000:02:00.0: irq 44 for MSI/MSI-X
[ 1.768200] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc90010e24000, d0:50:99:1b:94:fe, XID 0c900800 IRQ 44
[ 1.768202] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.772214] ahci 0000:00:11.0: version 3.0
[ 1.772439] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 1.772442] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 1.773260] scsi0 : ahci
[ 1.773970] scsi1 : ahci
[ 1.774150] scsi2 : ahci
[ 1.774204] scsi3 : ahci
[ 1.774252] scsi4 : ahci
[ 1.774313] scsi5 : ahci
[ 1.774373] ata1: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffd00 irq 22
[ 1.774376] ata2: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffd80 irq 22
[ 1.774379] ata3: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffe00 irq 22
[ 1.774381] ata4: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffe80 irq 22
[ 1.774384] ata5: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7fff00 irq 22
[ 1.774386] ata6: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7fff80 irq 22
[ 1.775347] ahci 0000:03:00.0: irq 45 for MSI/MSI-X
[ 1.775378] ahci 0000:03:00.0: SSS flag set, parallel bus scan disabled
[ 1.775402] ahci 0000:03:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.775405] ahci 0000:03:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
[ 1.775725] scsi7 : ahci
[ 1.776857] scsi8 : ahci
[ 1.776913] ata9: SATA max UDMA/133 abar m512@0xfeaffc00 port 0xfeaffd00 irq 45
[ 1.776916] ata10: SATA max UDMA/133 abar m512@0xfeaffc00 port 0xfeaffd80 irq 45
[ 1.777284] scsi6 : pata_atiixp
[ 1.777840] scsi9 : pata_atiixp
[ 1.777918] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 1.777919] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 1.977200] tsc: Refined TSC clocksource calibration: 3206.365 MHz
[ 2.073131] usb 2-4: new high-speed USB device number 2 using ehci-pci
[ 2.093140] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.093175] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.093208] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.234730] usb 2-4: New USB device found, idVendor=0bda, idProduct=0161
[ 2.234734] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.234736] usb 2-4: Product: USB2.0-CRW
[ 2.234738] usb 2-4: Manufacturer: Generic
[ 2.234739] usb 2-4: SerialNumber: 20070818000000000
[ 2.239706] usb-storage 2-4:1.1: USB Mass Storage device detected
[ 2.239967] scsi10 : usb-storage 2-4:1.1
[ 2.240031] usbcore: registered new interface driver usb-storage
[ 2.264905] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.264913] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.264946] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.264971] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.265454] ata2.00: ATAPI: TSSTcorp CDDVDW SH-S223L, SB02, max UDMA/100
[ 2.266186] ata2.00: configured for UDMA/100
[ 2.266367] ata3.00: HPA detected: current 125043311, native 125045424
[ 2.269492] ata3.00: ATA-8: SAMSUNG 470 Series SSD, AXM09B1Q, max UDMA/133
[ 2.269496] ata3.00: 125043311 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.270719] ata3.00: configured for UDMA/133
[ 2.271269] ata1.00: HPA detected: current 625140335, native 625142448
[ 2.271353] ata1.00: ATA-7: SAMSUNG HD322HJ, 1AC01118, max UDMA7
[ 2.271357] ata1.00: 625140335 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.276636] ata9.00: ATA-9: INTEL SSDSC2CT240A4, 335t, max UDMA/133
[ 2.276640] ata9.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.277856] ata1.00: configured for UDMA/133
[ 2.278086] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD322HJ 1AC0 PQ: 0 ANSI: 5
[ 2.278325] sd 0:0:0:0: [sda] 625140335 512-byte logical blocks: (320 GB/298 GiB)
[ 2.278360] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.278398] sd 0:0:0:0: [sda] Write Protect is off
[ 2.278400] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.278443] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.279261] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223L SB02 PQ: 0 ANSI: 5
[ 2.282615] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.282620] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.282785] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.282849] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.283009] scsi 2:0:0:0: Direct-Access ATA SAMSUNG 470 Seri AXM0 PQ: 0 ANSI: 5
[ 2.283169] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 2.283182] sd 2:0:0:0: [sdb] 125043311 512-byte logical blocks: (64.0 GB/59.6 GiB)
[ 2.283294] sd 2:0:0:0: [sdb] Write Protect is off
[ 2.283297] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.283330] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.284492] sdb: sdb1
[ 2.285093] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 2.286627] ata9.00: configured for UDMA/133
[ 2.286839] scsi 7:0:0:0: Direct-Access ATA INTEL SSDSC2CT24 335t PQ: 0 ANSI: 5
[ 2.287064] sd 7:0:0:0: [sdc] 468862128 512-byte logical blocks: (240 GB/223 GiB)
[ 2.287188] sd 7:0:0:0: Attached scsi generic sg3 type 0
[ 2.287191] sd 7:0:0:0: [sdc] Write Protect is off
[ 2.287194] sd 7:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.287216] sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.288613] sdc: sdc1 sdc2 < sdc5 sdc6 >
[ 2.288971] sd 7:0:0:0: [sdc] Attached SCSI disk
[ 2.299806] sda: sda1 sda2 < sda5 >
[ 2.300237] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.331004] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.372788] usb 3-1: new low-speed USB device number 2 using ohci-pci
[ 2.537660] usb 3-1: New USB device found, idVendor=093a, idProduct=2521
[ 2.537664] usb 3-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 2.537666] usb 3-1: Product: USB OPTICAL MOUSE
[ 2.604501] ata10: SATA link down (SStatus 0 SControl 300)
[ 2.663741] random: init urandom read with 49 bits of entropy available
[ 2.676454] usb 3-2: new low-speed USB device number 3 using ohci-pci
[ 2.695670] init: plymouth-upstart-bridge main process (192) terminated with status 1
[ 2.695682] init: plymouth-upstart-bridge main process ended, respawning
[ 2.706918] init: plymouth-upstart-bridge main process (200) terminated with status 1
[ 2.706932] init: plymouth-upstart-bridge main process ended, respawning
[ 2.713046] init: plymouth-upstart-bridge main process (205) terminated with status 1
[ 2.713059] init: plymouth-upstart-bridge main process ended, respawning
[ 2.848319] usb 3-2: New USB device found, idVendor=046d, idProduct=c326
[ 2.848323] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.848325] usb 3-2: Product: USB Keyboard
[ 2.848327] usb 3-2: Manufacturer: Logitech
[ 2.976198] Switched to clocksource tsc
[ 3.142477] ata9.00: exception Emask 0x10 SAct 0x7fffffff SErr 0x280100 action 0x6 frozen
[ 3.142481] ata9.00: irq_stat 0x08000000, interface fatal error
[ 3.142484] ata9: SError: { UnrecovData 10B8B BadCRC }
[ 3.142486] ata9.00: failed command: READ FPDMA QUEUED
[ 3.142490] ata9.00: cmd 60/88:00:d0:7e:60/00:00:00:00:00/40 tag 0 ncq 69632 in
[ 3.142490] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 3.142492] ata9.00: status: { DRDY }
[ 3.142493] ata9.00: failed command: READ FPDMA QUEUED
[ 3.142496] ata9.00: cmd 60/00:08:00:80:60/04:00:00:00:00/40 tag 1 ncq 524288 in
[ 3.142496] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 3.142497] ata9.00: status: { DRDY }
[ 3.142499] ata9.00: failed command: READ FPDMA QUEUED
[ 3.142501] ata9.00: cmd 60/28:10:00:84:60/00:00:00:00:00/40 tag 2 ncq 20480 in
[ 3.142501] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 3.142503] ata9.00: status: { DRDY }
[ 3.142504] ata9.00: failed command: READ FPDMA QUEUED
[ 3.142507] ata9.00: cmd 60/48:18:00:86:60/01:00:00:00:00/40 tag 3 ncq 167936 in
[ 3.142507] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 3.142508] ata9.00: status: { DRDY }
[ 3.142509] ata9.00: failed command: READ FPDMA QUEUED
[ 3.142512] ata9.00: cmd 60/00:20:00:88:60/04:00:00:00:00/40 tag 4 ncq 524288 in
[ 3.142512] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 3.142514] ata9.00: status: { DRDY }
[ 3.142515] ata9.00: failed command: READ FPDMA QUEUED
[ 3.142517] ata9.00: cmd 60/a8:28:00:8c:60/01:00:00:00:00/40 tag 5 ncq 217088 in
[ 3.142517] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 3.142519] ata9.00: status: { DRDY }
[ 3.142520] ata9.00: failed command: READ FPDMA QUEUED
[ 3.142523] ata9.00: cmd 60/88:30:f0:8e:60/01:00:00:00:00/40 tag 6 ncq 200704 in
[ 3.142523] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 3.142524] ata9.00: status: { DRDY }
[ 3.142525] ata9.00: failed command: READ FPDMA QUEUED
[ 3.142528] ata9.00: cmd 60/58:38:a8:90:60/02:00:00:00:00/40 tag 7 ncq 307200 in
[ 3.142528] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 3.142529] ata9.00: status: { DRDY }
[ 3.142531] ata9.00: failed command: READ FPDMA QUEUED
[ 3.142533] ata9.00: cmd 60/a8:40:58:93:60/01:00:00:00:00/40 tag 8 ncq 217088 in
[ 3.142533] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 3.142535] ata9.00: status: { DRDY }
[ 3.142536] ata9.00: failed command: READ FPDMA QUEUED
[ 3.142539] ata9.00: cmd 60/00:48:20:95:60/04:00:00:00:00/40 tag 9 ncq 524288 in
[ 3.142539] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 3.142540] ata9.00: status: { DRDY }
[ 3.142541] ata9.00: failed command: READ FPDMA QUEUED
[ 3.142544] ata9.00: cmd 60/10:50:20:99:60/00:00:00:00:00/40 tag 10 ncq 8192 in
[ 3.142544] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 3.142546] ata9.00: status: { DRDY }
[ 3.142547] ata9.00: failed command: READ FPDMA QUEUED
[ 3.142550] ata9.00: cmd 60/58:58:68:99:60/03:00:00:00:00/40 tag 11 ncq 438272 in
[ 3.142550] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 3.142551] ata9.00: status: { DRDY }
[ 3.142552] ata9.00: failed command: READ FPDMA QUEUED
[ 3.142555] ata9.00: cmd 60/80:60:d8:9c:60/01:00:00:00:00/40 tag 12 ncq 196608 in
[ 3.142555] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 3.142556] ata9.00: status: { DRDY }
[ 3.142558] ata9.00: failed command: READ FPDMA QUEUED
[ 3.142560] ata9.00: cmd 60/88:68:d0:9f:60/00:00:00:00:00/40 tag 13 ncq 69632 in
[ 3.142560] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 3.142562] ata9.00: status: { DRDY }
[ 3.142563] ata9.00: failed command: READ FPDMA QUEUED
[ 3.142566] ata9.00: cmd 60/c0:70:00:a1:60/00:00:00:00:00/40 tag 14 ncq 98304 in
[ 3.142566] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 3.142567] ata9.00: status: { DRDY }
[ 3.142568] ata9.00: failed command: READ FPDMA QUEUED
[ 3.142571] ata9.00: cmd 60/38:78:00:a2:60/01:00:00:00:00/40 tag 15 ncq 159744 in
[ 3.142571] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 3.142573] ata9.00: status: { DRDY }
[ 3.142574] ata9.00: failed command: READ FPDMA QUEUED
[ 3.142577] ata9.00: cmd 60/70:80:00:a4:60/02:00:00:00:00/40 tag 16 ncq 319488 in
[ 3.142577] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 3.142578] ata9.00: status: { DRDY }
[ 3.142579] ata9.00: failed command: READ FPDMA QUEUED
[ 3.142582] ata9.00: cmd 60/b0:88:00:a7:60/00:00:00:00:00/40 tag 17 ncq 90112 in
[ 3.142582] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 3.142583] ata9.00: status: { DRDY }
[ 3.142584] ata9.00: failed command: READ FPDMA QUEUED
[ 3.142587] ata9.00: cmd 60/90:90:00:a8:60/03:00:00:00:00/40 tag 18 ncq 466944 in
[ 3.142587] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 3.142589] ata9.00: status: { DRDY }
[ 3.142590] ata9.00: failed command: READ FPDMA QUEUED
[ 3.142593] ata9.00: cmd 60/00:98:d0:ad:60/01:00:00:00:00/40 tag 19 ncq 131072 in
[ 3.142593] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 3.142594] ata9.00: status: { DRDY }
[ 3.142595] ata9.00: failed command: READ FPDMA QUEUED
[ 3.142598] ata9.00: cmd 60/88:a0:48:b3:60/00:00:00:00:00/40 tag 20 ncq 69632 in
[ 3.142598] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 3.142599] ata9.00: status: { DRDY }
[ 3.142600] ata9.00: failed command: READ FPDMA QUEUED
[ 3.142603] ata9.00: cmd 60/38:a8:00:b4:60/02:00:00:00:00/40 tag 21 ncq 290816 in
[ 3.142603] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 3.142605] ata9.00: status: { DRDY }
[ 3.142606] ata9.00: failed command: READ FPDMA QUEUED
[ 3.142608] ata9.00: cmd 60/b0:b0:00:b7:60/00:00:00:00:00/40 tag 22 ncq 90112 in
[ 3.142608] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 3.142610] ata9.00: status: { DRDY }
[ 3.142611] ata9.00: failed command: READ FPDMA QUEUED
[ 3.142614] ata9.00: cmd 60/b8:b8:00:71:60/00:00:00:00:00/40 tag 23 ncq 94208 in
[ 3.142614] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 3.142615] ata9.00: status: { DRDY }
[ 3.142616] ata9.00: failed command: READ FPDMA QUEUED
[ 3.142619] ata9.00: cmd 60/60:c0:00:72:60/01:00:00:00:00/40 tag 24 ncq 180224 in
[ 3.142619] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 3.142621] ata9.00: status: { DRDY }
[ 3.142622] ata9.00: failed command: READ FPDMA QUEUED
[ 3.142625] ata9.00: cmd 60/e8:c8:00:74:60/00:00:00:00:00/40 tag 25 ncq 118784 in
[ 3.142625] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 3.142626] ata9.00: status: { DRDY }
[ 3.142627] ata9.00: failed command: READ FPDMA QUEUED
[ 3.142630] ata9.00: cmd 60/88:d0:00:75:60/00:00:00:00:00/40 tag 26 ncq 69632 in
[ 3.142630] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 3.142632] ata9.00: status: { DRDY }
[ 3.142633] ata9.00: failed command: READ FPDMA QUEUED
[ 3.142635] ata9.00: cmd 60/90:d8:00:76:60/00:00:00:00:00/40 tag 27 ncq 73728 in
[ 3.142635] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 3.142637] ata9.00: status: { DRDY }
[ 3.142638] ata9.00: failed command: READ FPDMA QUEUED
[ 3.142641] ata9.00: cmd 60/a0:e0:00:77:60/00:00:00:00:00/40 tag 28 ncq 81920 in
[ 3.142641] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 3.142642] ata9.00: status: { DRDY }
[ 3.142643] ata9.00: failed command: READ FPDMA QUEUED
[ 3.142646] ata9.00: cmd 60/00:e8:00:78:60/02:00:00:00:00/40 tag 29 ncq 262144 in
[ 3.142646] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 3.142648] ata9.00: status: { DRDY }
[ 3.142649] ata9.00: failed command: READ FPDMA QUEUED
[ 3.142651] ata9.00: cmd 60/00:f0:a0:7c:60/01:00:00:00:00/40 tag 30 ncq 131072 in
[ 3.142651] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 3.142653] ata9.00: status: { DRDY }
[ 3.142655] ata9: hard resetting link
[ 3.239896] scsi 10:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS
[ 3.243772] scsi 10:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS
[ 3.247765] scsi 10:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
[ 3.251627] scsi 10:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS
[ 3.251894] sd 10:0:0:0: Attached scsi generic sg4 type 0
[ 3.252025] sd 10:0:0:1: Attached scsi generic sg5 type 0
[ 3.252116] sd 10:0:0:2: Attached scsi generic sg6 type 0
[ 3.252227] sd 10:0:0:3: Attached scsi generic sg7 type 0
[ 3.262235] sd 10:0:0:0: [sdd] Attached SCSI removable disk
[ 3.263357] sd 10:0:0:1: [sde] Attached SCSI removable disk
[ 3.264484] sd 10:0:0:2: [sdf] Attached SCSI removable disk
[ 3.265596] sd 10:0:0:3: [sdg] Attached SCSI removable disk
[ 3.631316] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3.652912] ata9.00: configured for UDMA/133
[ 3.652950] ata9: EH complete
[ 33.884745] ata9.00: exception Emask 0x10 SAct 0x7fffffff SErr 0x280100 action 0x6 frozen
[ 33.884750] ata9: SError: { UnrecovData 10B8B BadCRC }
[ 33.884752] ata9.00: failed command: READ FPDMA QUEUED
[ 33.884756] ata9.00: cmd 60/00:00:68:5e:b6/01:00:00:00:00/40 tag 0 ncq 131072 in
[ 33.884756] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x14 (ATA bus error)
[ 33.884758] ata9.00: status: { DRDY }
[ 33.884760] ata9.00: failed command: READ FPDMA QUEUED
[ 33.884763] ata9.00: cmd 60/00:08:f0:6a:b6/01:00:00:00:00/40 tag 1 ncq 131072 in
[ 33.884763] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x14 (ATA bus error)
[ 33.884764] ata9.00: status: { DRDY }
[ 33.884765] ata9.00: failed command: READ FPDMA QUEUED
[ 33.884768] ata9.00: cmd 60/00:10:60:79:b6/01:00:00:00:00/40 tag 2 ncq 131072 in
[ 33.884768] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x14 (ATA bus error)
[ 33.884769] ata9.00: status: { DRDY }
[ 33.884770] ata9.00: failed command: READ FPDMA QUEUED
[ 33.884773] ata9.00: cmd 60/00:18:58:86:b6/01:00:00:00:00/40 tag 3 ncq 131072 in
[ 33.884773] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x14 (ATA bus error)
[ 33.884775] ata9.00: status: { DRDY }
[ 33.884776] ata9.00: failed command: READ FPDMA QUEUED
[ 33.884779] ata9.00: cmd 60/00:20:a0:88:b6/01:00:00:00:00/40 tag 4 ncq 131072 in
[ 33.884779] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x14 (ATA bus error)
[ 33.884780] ata9.00: status: { DRDY }
[ 33.884781] ata9.00: failed command: READ FPDMA QUEUED
[ 33.884784] ata9.00: cmd 60/00:28:10:8c:b6/01:00:00:00:00/40 tag 5 ncq 131072 in
[ 33.884784] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x14 (ATA bus error)
[ 33.884786] ata9.00: status: { DRDY }
[ 33.884787] ata9.00: failed command: READ FPDMA QUEUED
[ 33.884790] ata9.00: cmd 60/00:30:a0:9e:b6/01:00:00:00:00/40 tag 6 ncq 131072 in
[ 33.884790] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x14 (ATA bus error)
[ 33.884791] ata9.00: status: { DRDY }
[ 33.884792] ata9.00: failed command: READ FPDMA QUEUED
[ 33.884795] ata9.00: cmd 60/00:38:d8:ae:b6/01:00:00:00:00/40 tag 7 ncq 131072 in
[ 33.884795] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x14 (ATA bus error)
[ 33.884796] ata9.00: status: { DRDY }
[ 33.884798] ata9.00: failed command: READ FPDMA QUEUED
[ 33.884800] ata9.00: cmd 60/00:40:08:ec:b6/01:00:00:00:00/40 tag 8 ncq 131072 in
[ 33.884800] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x14 (ATA bus error)
[ 33.884802] ata9.00: status: { DRDY }
[ 33.884803] ata9.00: failed command: READ FPDMA QUEUED
[ 33.884806] ata9.00: cmd 60/00:48:a0:ee:b6/01:00:00:00:00/40 tag 9 ncq 131072 in
[ 33.884806] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x14 (ATA bus error)
[ 33.884807] ata9.00: status: { DRDY }
[ 33.884808] ata9.00: failed command: READ FPDMA QUEUED
[ 33.884811] ata9.00: cmd 60/00:50:98:f1:b6/01:00:00:00:00/40 tag 10 ncq 131072 in
[ 33.884811] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x14 (ATA bus error)
[ 33.884812] ata9.00: status: { DRDY }
[ 33.884814] ata9.00: failed command: READ FPDMA QUEUED
[ 33.884816] ata9.00: cmd 60/00:58:c8:f5:b6/01:00:00:00:00/40 tag 11 ncq 131072 in
[ 33.884816] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x14 (ATA bus error)
[ 33.884818] ata9.00: status: { DRDY }
[ 33.884819] ata9.00: failed command: READ FPDMA QUEUED
[ 33.884822] ata9.00: cmd 60/00:60:78:f8:b6/01:00:00:00:00/40 tag 12 ncq 131072 in
[ 33.884822] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x14 (ATA bus error)
[ 33.884823] ata9.00: status: { DRDY }
[ 33.884824] ata9.00: failed command: READ FPDMA QUEUED
[ 33.884827] ata9.00: cmd 60/00:68:48:06:b7/01:00:00:00:00/40 tag 13 ncq 131072 in
[ 33.884827] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x14 (ATA bus error)
[ 33.884829] ata9.00: status: { DRDY }
[ 33.884830] ata9.00: failed command: READ FPDMA QUEUED
[ 33.884833] ata9.00: cmd 60/90:70:90:15:b7/00:00:00:00:00/40 tag 14 ncq 73728 in
[ 33.884833] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x14 (ATA bus error)
[ 33.884834] ata9.00: status: { DRDY }
[ 33.884835] ata9.00: failed command: READ FPDMA QUEUED
[ 33.884838] ata9.00: cmd 60/48:78:e8:51:c4/00:00:00:00:00/40 tag 15 ncq 36864 in
[ 33.884838] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x14 (ATA bus error)
[ 33.884839] ata9.00: status: { DRDY }
[ 33.884841] ata9.00: failed command: READ FPDMA QUEUED
[ 33.884843] ata9.00: cmd 60/38:80:00:6b:c4/00:00:00:00:00/40 tag 16 ncq 28672 in
[ 33.884843] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x14 (ATA bus error)
[ 33.884845] ata9.00: status: { DRDY }
[ 33.884846] ata9.00: failed command: READ FPDMA QUEUED
[ 33.884849] ata9.00: cmd 60/20:88:88:6c:c4/00:00:00:00:00/40 tag 17 ncq 16384 in
[ 33.884849] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x14 (ATA bus error)
[ 33.884850] ata9.00: status: { DRDY }
[ 33.884851] ata9.00: failed command: READ FPDMA QUEUED
[ 33.884854] ata9.00: cmd 60/60:90:98:8e:c4/00:00:00:00:00/40 tag 18 ncq 49152 in
[ 33.884854] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x14 (ATA bus error)
[ 33.884855] ata9.00: status: { DRDY }
[ 33.884857] ata9.00: failed command: READ FPDMA QUEUED
[ 33.884859] ata9.00: cmd 60/18:98:78:b6:c4/00:00:00:00:00/40 tag 19 ncq 12288 in
[ 33.884859] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x14 (ATA bus error)
[ 33.884861] ata9.00: status: { DRDY }
[ 33.884862] ata9.00: failed command: READ FPDMA QUEUED
[ 33.884865] ata9.00: cmd 60/08:a0:a0:fd:c4/00:00:00:00:00/40 tag 20 ncq 4096 in
[ 33.884865] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x14 (ATA bus error)
[ 33.884866] ata9.00: status: { DRDY }
[ 33.884867] ata9.00: failed command: READ FPDMA QUEUED
[ 33.884870] ata9.00: cmd 60/08:a8:08:0f:c5/00:00:00:00:00/40 tag 21 ncq 4096 in
[ 33.884870] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x14 (ATA bus error)
[ 33.884871] ata9.00: status: { DRDY }
[ 33.884873] ata9.00: failed command: READ FPDMA QUEUED
[ 33.884875] ata9.00: cmd 60/00:b0:00:c8:b5/01:00:00:00:00/40 tag 22 ncq 131072 in
[ 33.884875] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x14 (ATA bus error)
[ 33.884877] ata9.00: status: { DRDY }
[ 33.884878] ata9.00: failed command: READ FPDMA QUEUED
[ 33.884881] ata9.00: cmd 60/00:b8:a0:cc:b5/02:00:00:00:00/40 tag 23 ncq 262144 in
[ 33.884881] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x14 (ATA bus error)
[ 33.884882] ata9.00: status: { DRDY }
[ 33.884883] ata9.00: failed command: READ FPDMA QUEUED
[ 33.884886] ata9.00: cmd 60/00:c0:70:d8:b5/01:00:00:00:00/40 tag 24 ncq 131072 in
[ 33.884886] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x14 (ATA bus error)
[ 33.884888] ata9.00: status: { DRDY }
[ 33.884889] ata9.00: failed command: READ FPDMA QUEUED
[ 33.884891] ata9.00: cmd 60/00:c8:98:da:b5/01:00:00:00:00/40 tag 25 ncq 131072 in
[ 33.884891] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x14 (ATA bus error)
[ 33.884893] ata9.00: status: { DRDY }
[ 33.884894] ata9.00: failed command: READ FPDMA QUEUED
[ 33.884897] ata9.00: cmd 60/00:d0:a8:e5:b5/01:00:00:00:00/40 tag 26 ncq 131072 in
[ 33.884897] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x14 (ATA bus error)
[ 33.884898] ata9.00: status: { DRDY }
[ 33.884899] ata9.00: failed command: READ FPDMA QUEUED
[ 33.884902] ata9.00: cmd 60/00:d8:50:22:b6/01:00:00:00:00/40 tag 27 ncq 131072 in
[ 33.884902] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x14 (ATA bus error)
[ 33.884904] ata9.00: status: { DRDY }
[ 33.884905] ata9.00: failed command: READ FPDMA QUEUED
[ 33.884908] ata9.00: cmd 60/00:e0:28:27:b6/01:00:00:00:00/40 tag 28 ncq 131072 in
[ 33.884908] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x14 (ATA bus error)
[ 33.884909] ata9.00: status: { DRDY }
[ 33.884910] ata9.00: failed command: READ FPDMA QUEUED
[ 33.884913] ata9.00: cmd 60/00:e8:d0:33:b6/01:00:00:00:00/40 tag 29 ncq 131072 in
[ 33.884913] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x14 (ATA bus error)
[ 33.884914] ata9.00: status: { DRDY }
[ 33.884915] ata9.00: failed command: READ FPDMA QUEUED
[ 33.884918] ata9.00: cmd 60/00:f0:c8:53:b6/01:00:00:00:00/40 tag 30 ncq 131072 in
[ 33.884918] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x14 (ATA bus error)
[ 33.884920] ata9.00: status: { DRDY }
[ 33.884922] ata9: hard resetting link
[ 34.376163] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 34.398130] ata9.00: configured for UDMA/133
[ 34.398167] ata9: EH complete
[ 64.889297] ata9.00: exception Emask 0x10 SAct 0x7fffffff SErr 0x280100 action 0x6 frozen
[ 64.889303] ata9: SError: { UnrecovData 10B8B BadCRC }
[ 64.889306] ata9.00: failed command: READ FPDMA QUEUED
[ 64.889310] ata9.00: cmd 60/00:00:00:eb:92/01:00:01:00:00/40 tag 0 ncq 131072 in
[ 64.889310] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x14 (ATA bus error)
[ 64.889312] ata9.00: status: { DRDY }
[ 64.889313] ata9.00: failed command: READ FPDMA QUEUED
[ 64.889316] ata9.00: cmd 60/00:08:68:ed:92/04:00:01:00:00/40 tag 1 ncq 524288 in
[ 64.889316] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x14 (ATA bus error)
[ 64.889317] ata9.00: status: { DRDY }
[ 64.889319] ata9.00: failed command: READ FPDMA QUEUED
[ 64.889322] ata9.00: cmd 60/18:10:68:f1:92/03:00:01:00:00/40 tag 2 ncq 405504 in
[ 64.889322] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x14 (ATA bus error)
[ 64.889323] ata9.00: status: { DRDY }
[ 64.889324] ata9.00: failed command: READ FPDMA QUEUED
[ 64.889327] ata9.00: cmd 60/58:18:00:f6:92/00:00:01:00:00/40 tag 3 ncq 45056 in
[ 64.889327] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x14 (ATA bus error)
[ 64.889328] ata9.00: status: { DRDY }
[ 64.889330] ata9.00: failed command: READ FPDMA QUEUED
[ 64.889332] ata9.00: cmd 60/a8:20:90:fb:92/01:00:01:00:00/40 tag 4 ncq 217088 in
[ 64.889332] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x14 (ATA bus error)
[ 64.889334] ata9.00: status: { DRDY }
[ 64.889335] ata9.00: failed command: READ FPDMA QUEUED
[ 64.889338] ata9.00: cmd 60/90:28:48:fd:92/00:00:01:00:00/40 tag 5 ncq 73728 in
[ 64.889338] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x14 (ATA bus error)
[ 64.889339] ata9.00: status: { DRDY }
[ 64.889340] ata9.00: failed command: READ FPDMA QUEUED
[ 64.889343] ata9.00: cmd 60/20:30:e0:07:93/00:00:01:00:00/40 tag 6 ncq 16384 in
[ 64.889343] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x14 (ATA bus error)
[ 64.889344] ata9.00: status: { DRDY }
[ 64.889346] ata9.00: failed command: READ FPDMA QUEUED
[ 64.889348] ata9.00: cmd 60/08:38:a8:97:93/00:00:01:00:00/40 tag 7 ncq 4096 in
[ 64.889348] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x14 (ATA bus error)
[ 64.889350] ata9.00: status: { DRDY }
[ 64.889351] ata9.00: failed command: READ FPDMA QUEUED
[ 64.889354] ata9.00: cmd 60/08:40:98:a6:93/00:00:01:00:00/40 tag 8 ncq 4096 in
[ 64.889354] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x14 (ATA bus error)
[ 64.889355] ata9.00: status: { DRDY }
[ 64.889356] ata9.00: failed command: READ FPDMA QUEUED
[ 64.889359] ata9.00: cmd 60/08:48:30:a7:93/00:00:01:00:00/40 tag 9 ncq 4096 in
[ 64.889359] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x14 (ATA bus error)
[ 64.889360] ata9.00: status: { DRDY }
[ 64.889362] ata9.00: failed command: READ FPDMA QUEUED
[ 64.889364] ata9.00: cmd 60/10:50:50:e8:93/00:00:01:00:00/40 tag 10 ncq 8192 in
[ 64.889364] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x14 (ATA bus error)
[ 64.889366] ata9.00: status: { DRDY }
[ 64.889367] ata9.00: failed command: READ FPDMA QUEUED
[ 64.889370] ata9.00: cmd 60/08:58:78:e8:93/00:00:01:00:00/40 tag 11 ncq 4096 in
[ 64.889370] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x14 (ATA bus error)
[ 64.889371] ata9.00: status: { DRDY }
[ 64.889372] ata9.00: failed command: READ FPDMA QUEUED
[ 64.889375] ata9.00: cmd 60/40:60:a8:e8:93/00:00:01:00:00/40 tag 12 ncq 32768 in
[ 64.889375] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x14 (ATA bus error)
[ 64.889376] ata9.00: status: { DRDY }
[ 64.889378] ata9.00: failed command: READ FPDMA QUEUED
[ 64.889380] ata9.00: cmd 60/30:68:98:ea:93/00:00:01:00:00/40 tag 13 ncq 24576 in
[ 64.889380] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x14 (ATA bus error)
[ 64.889382] ata9.00: status: { DRDY }
[ 64.889383] ata9.00: failed command: READ FPDMA QUEUED
[ 64.889386] ata9.00: cmd 60/08:70:78:eb:93/00:00:01:00:00/40 tag 14 ncq 4096 in
[ 64.889386] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x14 (ATA bus error)
[ 64.889387] ata9.00: status: { DRDY }
[ 64.889388] ata9.00: failed command: READ FPDMA QUEUED
[ 64.889391] ata9.00: cmd 60/08:78:d0:eb:93/00:00:01:00:00/40 tag 15 ncq 4096 in
[ 64.889391] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x14 (ATA bus error)
[ 64.889393] ata9.00: status: { DRDY }
[ 64.889394] ata9.00: failed command: READ FPDMA QUEUED
[ 64.889396] ata9.00: cmd 60/08:80:20:ec:93/00:00:01:00:00/40 tag 16 ncq 4096 in
[ 64.889396] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x14 (ATA bus error)
[ 64.889398] ata9.00: status: { DRDY }
[ 64.889399] ata9.00: failed command: READ FPDMA QUEUED
[ 64.889402] ata9.00: cmd 60/40:88:c8:ee:93/00:00:01:00:00/40 tag 17 ncq 32768 in
[ 64.889402] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x14 (ATA bus error)
[ 64.889403] ata9.00: status: { DRDY }
[ 64.889404] ata9.00: failed command: READ FPDMA QUEUED
[ 64.889407] ata9.00: cmd 60/08:90:20:ef:93/00:00:01:00:00/40 tag 18 ncq 4096 in
[ 64.889407] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x14 (ATA bus error)
[ 64.889409] ata9.00: status: { DRDY }
[ 64.889410] ata9.00: failed command: READ FPDMA QUEUED
[ 64.889413] ata9.00: cmd 60/68:98:68:ef:93/00:00:01:00:00/40 tag 19 ncq 53248 in
[ 64.889413] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x14 (ATA bus error)
[ 64.889414] ata9.00: status: { DRDY }
[ 64.889415] ata9.00: failed command: READ FPDMA QUEUED
[ 64.889418] ata9.00: cmd 60/70:a0:e8:ef:93/00:00:01:00:00/40 tag 20 ncq 57344 in
[ 64.889418] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x14 (ATA bus error)
[ 64.889419] ata9.00: status: { DRDY }
[ 64.889421] ata9.00: failed command: READ FPDMA QUEUED
[ 64.889423] ata9.00: cmd 60/08:a8:60:f0:93/00:00:01:00:00/40 tag 21 ncq 4096 in
[ 64.889423] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x14 (ATA bus error)
[ 64.889425] ata9.00: status: { DRDY }
[ 64.889426] ata9.00: failed command: READ FPDMA QUEUED
[ 64.889429] ata9.00: cmd 60/08:b0:b0:f0:93/00:00:01:00:00/40 tag 22 ncq 4096 in
[ 64.889429] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x14 (ATA bus error)
[ 64.889430] ata9.00: status: { DRDY }
[ 64.889431] ata9.00: failed command: READ FPDMA QUEUED
[ 64.889434] ata9.00: cmd 60/38:b8:68:f1:93/00:00:01:00:00/40 tag 23 ncq 28672 in
[ 64.889434] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x14 (ATA bus error)
[ 64.889435] ata9.00: status: { DRDY }
[ 64.889437] ata9.00: failed command: READ FPDMA QUEUED
[ 64.889439] ata9.00: cmd 60/18:c0:a8:f1:93/00:00:01:00:00/40 tag 24 ncq 12288 in
[ 64.889439] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x14 (ATA bus error)
[ 64.889441] ata9.00: status: { DRDY }
[ 64.889442] ata9.00: failed command: READ FPDMA QUEUED
[ 64.889445] ata9.00: cmd 60/50:c8:00:1c:94/00:00:01:00:00/40 tag 25 ncq 40960 in
[ 64.889445] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x14 (ATA bus error)
[ 64.889446] ata9.00: status: { DRDY }
[ 64.889447] ata9.00: failed command: READ FPDMA QUEUED
[ 64.889450] ata9.00: cmd 60/00:d0:c0:de:92/04:00:01:00:00/40 tag 26 ncq 524288 in
[ 64.889450] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x14 (ATA bus error)
[ 64.889451] ata9.00: status: { DRDY }
[ 64.889453] ata9.00: failed command: READ FPDMA QUEUED
[ 64.889455] ata9.00: cmd 60/00:d8:c0:e2:92/04:00:01:00:00/40 tag 27 ncq 524288 in
[ 64.889455] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x14 (ATA bus error)
[ 64.889457] ata9.00: status: { DRDY }
[ 64.889458] ata9.00: failed command: READ FPDMA QUEUED
[ 64.889461] ata9.00: cmd 60/98:e0:c0:e6:92/00:00:01:00:00/40 tag 28 ncq 77824 in
[ 64.889461] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x14 (ATA bus error)
[ 64.889462] ata9.00: status: { DRDY }
[ 64.889463] ata9.00: failed command: READ FPDMA QUEUED
[ 64.889466] ata9.00: cmd 60/60:e8:88:e7:92/00:00:01:00:00/40 tag 29 ncq 49152 in
[ 64.889466] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x14 (ATA bus error)
[ 64.889467] ata9.00: status: { DRDY }
[ 64.889469] ata9.00: failed command: READ FPDMA QUEUED
[ 64.889471] ata9.00: cmd 60/08:f0:38:e8:92/01:00:01:00:00/40 tag 30 ncq 135168 in
[ 64.889471] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x14 (ATA bus error)
[ 64.889473] ata9.00: status: { DRDY }
[ 64.889475] ata9: hard resetting link
[ 65.380712] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 65.402578] ata9.00: configured for UDMA/133
[ 65.402615] ata9: EH complete
[ 95.829898] ata9: limiting SATA link speed to 3.0 Gbps
[ 95.829904] ata9.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x80000 action 0x6 frozen
[ 95.829905] ata9: SError: { 10B8B }
[ 95.829907] ata9.00: failed command: READ FPDMA QUEUED
[ 95.829911] ata9.00: cmd 60/f8:00:78:63:d3/00:00:01:00:00/40 tag 0 ncq 126976 in
[ 95.829911] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x4 (timeout)
[ 95.829912] ata9.00: status: { DRDY }
[ 95.829914] ata9.00: failed command: READ FPDMA QUEUED
[ 95.829917] ata9.00: cmd 60/58:08:c0:6a:d3/00:00:01:00:00/40 tag 1 ncq 45056 in
[ 95.829917] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x4 (timeout)
[ 95.829918] ata9.00: status: { DRDY }
[ 95.829919] ata9.00: failed command: READ FPDMA QUEUED
[ 95.829922] ata9.00: cmd 60/e0:10:48:6b:d3/01:00:01:00:00/40 tag 2 ncq 245760 in
[ 95.829922] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x4 (timeout)
[ 95.829923] ata9.00: status: { DRDY }
[ 95.829924] ata9.00: failed command: READ FPDMA QUEUED
[ 95.829927] ata9.00: cmd 60/30:18:68:79:d3/00:00:01:00:00/40 tag 3 ncq 24576 in
[ 95.829927] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x4 (timeout)
[ 95.829929] ata9.00: status: { DRDY }
[ 95.829930] ata9.00: failed command: READ FPDMA QUEUED
[ 95.829932] ata9.00: cmd 60/d0:20:28:d9:cb/02:00:01:00:00/40 tag 4 ncq 368640 in
[ 95.829932] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x4 (timeout)
[ 95.829934] ata9.00: status: { DRDY }
[ 95.829935] ata9.00: failed command: READ FPDMA QUEUED
[ 95.829938] ata9.00: cmd 60/28:28:f8:db:cb/03:00:01:00:00/40 tag 5 ncq 413696 in
[ 95.829938] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x4 (timeout)
[ 95.829939] ata9.00: status: { DRDY }
[ 95.829940] ata9.00: failed command: READ FPDMA QUEUED
[ 95.829943] ata9.00: cmd 60/b0:30:68:df:cb/01:00:01:00:00/40 tag 6 ncq 221184 in
[ 95.829943] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x4 (timeout)
[ 95.829944] ata9.00: status: { DRDY }
[ 95.829946] ata9.00: failed command: READ FPDMA QUEUED
[ 95.829948] ata9.00: cmd 60/58:38:a8:e1:cb/01:00:01:00:00/40 tag 7 ncq 176128 in
[ 95.829948] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x4 (timeout)
[ 95.829950] ata9.00: status: { DRDY }
[ 95.829951] ata9.00: failed command: READ FPDMA QUEUED
[ 95.829954] ata9.00: cmd 60/08:40:00:cc:cb/00:00:01:00:00/40 tag 8 ncq 4096 in
[ 95.829954] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x4 (timeout)
[ 95.829955] ata9.00: status: { DRDY }
[ 95.829956] ata9.00: failed command: READ FPDMA QUEUED
[ 95.829959] ata9.00: cmd 60/a0:48:30:cc:cb/02:00:01:00:00/40 tag 9 ncq 344064 in
[ 95.829959] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x4 (timeout)
[ 95.829960] ata9.00: status: { DRDY }
[ 95.829962] ata9.00: failed command: READ FPDMA QUEUED
[ 95.829964] ata9.00: cmd 60/08:50:b0:01:cc/01:00:01:00:00/40 tag 10 ncq 135168 in
[ 95.829964] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x4 (timeout)
[ 95.829966] ata9.00: status: { DRDY }
[ 95.829967] ata9.00: failed command: READ FPDMA QUEUED
[ 95.829970] ata9.00: cmd 60/e8:58:00:18:cc/03:00:01:00:00/40 tag 11 ncq 512000 in
[ 95.829970] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x4 (timeout)
[ 95.829971] ata9.00: status: { DRDY }
[ 95.829972] ata9.00: failed command: READ FPDMA QUEUED
[ 95.829975] ata9.00: cmd 60/00:60:c0:2a:cc/04:00:01:00:00/40 tag 12 ncq 524288 in
[ 95.829975] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x4 (timeout)
[ 95.829976] ata9.00: status: { DRDY }
[ 95.829977] ata9.00: failed command: READ FPDMA QUEUED
[ 95.829980] ata9.00: cmd 60/40:68:c0:2e:cc/00:00:01:00:00/40 tag 13 ncq 32768 in
[ 95.829980] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x4 (timeout)
[ 95.829982] ata9.00: status: { DRDY }
[ 95.829983] ata9.00: failed command: READ FPDMA QUEUED
[ 95.829986] ata9.00: cmd 60/00:70:00:70:cc/01:00:01:00:00/40 tag 14 ncq 131072 in
[ 95.829986] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x4 (timeout)
[ 95.829987] ata9.00: status: { DRDY }
[ 95.829988] ata9.00: failed command: READ FPDMA QUEUED
[ 95.829991] ata9.00: cmd 60/38:78:30:a3:cd/02:00:01:00:00/40 tag 15 ncq 290816 in
[ 95.829991] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x4 (timeout)
[ 95.829992] ata9.00: status: { DRDY }
[ 95.829993] ata9.00: failed command: READ FPDMA QUEUED
[ 95.829996] ata9.00: cmd 60/00:80:60:ad:cd/01:00:01:00:00/40 tag 16 ncq 131072 in
[ 95.829996] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x4 (timeout)
[ 95.829998] ata9.00: status: { DRDY }
[ 95.829999] ata9.00: failed command: READ FPDMA QUEUED
[ 95.830002] ata9.00: cmd 60/88:88:b8:af:cd/00:00:01:00:00/40 tag 17 ncq 69632 in
[ 95.830002] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x4 (timeout)
[ 95.830003] ata9.00: status: { DRDY }
[ 95.830004] ata9.00: failed command: READ FPDMA QUEUED
[ 95.830007] ata9.00: cmd 60/58:90:a8:fb:cf/00:00:01:00:00/40 tag 18 ncq 45056 in
[ 95.830007] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x4 (timeout)
[ 95.830008] ata9.00: status: { DRDY }
[ 95.830009] ata9.00: failed command: READ FPDMA QUEUED
[ 95.830012] ata9.00: cmd 60/d0:98:78:33:d1/00:00:01:00:00/40 tag 19 ncq 106496 in
[ 95.830012] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x4 (timeout)
[ 95.830014] ata9.00: status: { DRDY }
[ 95.830015] ata9.00: failed command: READ FPDMA QUEUED
[ 95.830017] ata9.00: cmd 60/00:a0:d0:cb:d2/04:00:01:00:00/40 tag 20 ncq 524288 in
[ 95.830017] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x4 (timeout)
[ 95.830019] ata9.00: status: { DRDY }
[ 95.830020] ata9.00: failed command: READ FPDMA QUEUED
[ 95.830023] ata9.00: cmd 60/18:a8:d0:cf:d2/00:00:01:00:00/40 tag 21 ncq 12288 in
[ 95.830023] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x4 (timeout)
[ 95.830024] ata9.00: status: { DRDY }
[ 95.830025] ata9.00: failed command: READ FPDMA QUEUED
[ 95.830028] ata9.00: cmd 60/00:b0:38:da:d2/01:00:01:00:00/40 tag 22 ncq 131072 in
[ 95.830028] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x4 (timeout)
[ 95.830029] ata9.00: status: { DRDY }
[ 95.830031] ata9.00: failed command: READ FPDMA QUEUED
[ 95.830033] ata9.00: cmd 60/00:b8:48:e2:d2/04:00:01:00:00/40 tag 23 ncq 524288 in
[ 95.830033] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x4 (timeout)
[ 95.830035] ata9.00: status: { DRDY }
[ 95.830036] ata9.00: failed command: READ FPDMA QUEUED
[ 95.830039] ata9.00: cmd 60/30:c0:48:e6:d2/00:00:01:00:00/40 tag 24 ncq 24576 in
[ 95.830039] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x4 (timeout)
[ 95.830040] ata9.00: status: { DRDY }
[ 95.830041] ata9.00: failed command: READ FPDMA QUEUED
[ 95.830044] ata9.00: cmd 60/c8:c8:58:2b:d3/01:00:01:00:00/40 tag 25 ncq 233472 in
[ 95.830044] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x4 (timeout)
[ 95.830045] ata9.00: status: { DRDY }
[ 95.830046] ata9.00: failed command: READ FPDMA QUEUED
[ 95.830049] ata9.00: cmd 60/10:d0:c8:2d:d3/01:00:01:00:00/40 tag 26 ncq 139264 in
[ 95.830049] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x4 (timeout)
[ 95.830051] ata9.00: status: { DRDY }
[ 95.830052] ata9.00: failed command: READ FPDMA QUEUED
[ 95.830055] ata9.00: cmd 60/30:d8:a0:35:d3/00:00:01:00:00/40 tag 27 ncq 24576 in
[ 95.830055] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x4 (timeout)
[ 95.830056] ata9.00: status: { DRDY }
[ 95.830057] ata9.00: failed command: READ FPDMA QUEUED
[ 95.830060] ata9.00: cmd 60/58:e0:68:43:d3/00:00:01:00:00/40 tag 28 ncq 45056 in
[ 95.830060] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x4 (timeout)
[ 95.830061] ata9.00: status: { DRDY }
[ 95.830062] ata9.00: failed command: READ FPDMA QUEUED
[ 95.830065] ata9.00: cmd 60/38:e8:68:58:d3/00:00:01:00:00/40 tag 29 ncq 28672 in
[ 95.830065] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x4 (timeout)
[ 95.830067] ata9.00: status: { DRDY }
[ 95.830068] ata9.00: failed command: READ FPDMA QUEUED
[ 95.830070] ata9.00: cmd 60/70:f0:f8:5b:d3/00:00:01:00:00/40 tag 30 ncq 57344 in
[ 95.830070] res 40/00:d8:00:76:60/00:00:00:00:00/40 Emask 0x4 (timeout)
[ 95.830072] ata9.00: status: { DRDY }
[ 95.830075] ata9: hard resetting link
[ 96.321334] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 96.343106] ata9.00: configured for UDMA/133
[ 96.343144] ata9: EH complete
[ 96.407682] random: nonblocking pool is initialized
[ 96.461880] Adding 3959804k swap on /dev/sdc6. Priority:-1 extents:1 across:3959804k SSFS
[ 96.475542] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 96.531936] systemd-udevd[325]: starting version 204
[ 96.576078] lp: driver loaded but no devices found
[ 96.581868] wmi: Mapper loaded
[ 96.586708] nct6775: Found NCT6776D/F or compatible chip at 0x2e:0x290
[ 96.595568] ppdev: user-space parallel port driver
[ 96.604243] parport_pc 00:05: reported by Plug and Play ACPI
[ 96.604306] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 96.619641] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 96.629681] [drm] Initialized drm 1.1.0 20060810
[ 96.634834] EXT4-fs (sdc1): re-mounted. Opts: errors=remount-ro
[ 96.669011] type=1400 audit(1410815044.548:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=380 comm="apparmor_parser"
[ 96.669020] type=1400 audit(1410815044.548:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=380 comm="apparmor_parser"
[ 96.669023] type=1400 audit(1410815044.548:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=380 comm="apparmor_parser"
[ 96.669409] type=1400 audit(1410815044.548:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=380 comm="apparmor_parser"
[ 96.669414] type=1400 audit(1410815044.548:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=380 comm="apparmor_parser"
[ 96.669614] type=1400 audit(1410815044.548:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=380 comm="apparmor_parser"
[ 96.738560] EXT4-fs (sdc5): mounted filesystem with ordered data mode. Opts: (null)
[ 96.744199] [drm] radeon kernel modesetting enabled.
[ 96.744288] checking generic (d0000000 5b0000) vs hw (d0000000 10000000)
[ 96.744289] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
[ 96.744314] Console: switching to colour dummy device 80x25
[ 96.744496] lp0: using parport0 (interrupt-driven).
[ 96.744646] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 1 (20131115/utaddress-251)
[ 96.744655] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 96.756054] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 96.756145] sp5100_tco: PCI Revision ID: 0x3c
[ 96.756164] sp5100_tco: failed to find MMIO address, giving up.
[ 96.759334] [drm] initializing kernel modesetting (RS780 0x1002:0x9616 0x1849:0x9616).
[ 96.759483] [drm] register mmio base: 0xFE9F0000
[ 96.759484] [drm] register mmio size: 65536
[ 96.762701] ATOM BIOS: 113
[ 96.762740] radeon 0000:01:05.0: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used)
[ 96.762742] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[ 96.762746] [drm] Detected VRAM RAM=256M, BAR=256M
[ 96.762748] [drm] RAM width 32bits DDR
[ 96.763828] [TTM] Zone kernel: Available graphics memory: 3959184 kiB
[ 96.763832] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 96.763833] [TTM] Initializing pool allocator
[ 96.763838] [TTM] Initializing DMA pool allocator
[ 96.763863] [drm] radeon: 256M of VRAM memory ready
[ 96.763864] [drm] radeon: 512M of GTT memory ready.
[ 96.763880] [drm] Loading RS780 Microcode
[ 96.777952] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 96.782884] MCE: In-kernel MCE decoding enabled.
[ 96.786224] EDAC MC: Ver: 3.0.0
[ 96.789482] AMD64 EDAC driver v3.4.0
[ 96.789510] EDAC amd64: DRAM ECC disabled.
[ 96.789516] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 96.789516] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 96.789516] (Note that use of the override may cause unknown side effects.)
[ 96.800715] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
[ 96.802016] radeon 0000:01:05.0: WB enabled
[ 96.802024] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0xffff880211ae9c00
[ 96.802026] radeon 0000:01:05.0: fence driver on ring 3 use gpu addr 0x00000000a0000c0c and cpu addr 0xffff880211ae9c0c
[ 96.802029] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 96.802030] [drm] Driver supports precise vblank timestamp query.
[ 96.802048] [drm] radeon: irq initialized.
[ 96.823984] hda-intel 0000:00:14.2: Using LPIB position fix
[ 96.828998] hda-intel 0000:00:14.2: Enable sync_write for stable communication
[ 96.835471] [drm] ring test on 0 succeeded in 1 usecs
[ 96.835533] [drm] ring test on 3 succeeded in 1 usecs
[ 96.835649] [drm] Enabling audio 0 support
[ 96.835668] [drm] ib test on ring 0 succeeded in 0 usecs
[ 96.835683] [drm] ib test on ring 3 succeeded in 0 usecs
[ 96.835883] [drm] Radeon Display Connectors
[ 96.835884] [drm] Connector 0:
[ 96.835885] [drm] VGA-1
[ 96.835886] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 96.835887] [drm] Encoders:
[ 96.835888] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 96.835889] [drm] Connector 1:
[ 96.835890] [drm] HDMI-A-1
[ 96.835891] [drm] HPD3
[ 96.835892] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 96.835893] [drm] Encoders:
[ 96.835894] [drm] DFP3: INTERNAL_KLDSCP_LVTMA
[ 96.835915] [drm] radeon: power management initialized
[ 96.843483] SKU: Nid=0x1d sku_cfg=0x4004c601
[ 96.843487] SKU: port_connectivity=0x1
[ 96.843488] SKU: enable_pcbeep=0x0
[ 96.843489] SKU: check_sum=0x00000004
[ 96.843489] SKU: customization=0x000000c6
[ 96.843490] SKU: external_amp=0x0
[ 96.843491] SKU: platform_type=0x0
[ 96.843492] SKU: swap=0x0
[ 96.843492] SKU: override=0x1
[ 96.845232] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 96.845237] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 96.845238] hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 96.845239] mono: mono_out=0x0
[ 96.845240] inputs:
[ 96.845241] Front Mic=0x19
[ 96.845243] Rear Mic=0x18
[ 96.845243] Line=0x1a
[ 96.845245] realtek: No valid SSID, checking pincfg 0x4004c601 for NID 0x1d
[ 96.845246] realtek: Enabling init ASM_ID=0xc601 CODEC_ID=10ec0662
[ 96.870835] input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[ 96.871933] kvm: Nested Virtualization enabled
[ 96.871941] kvm: Nested Paging enabled
[ 96.892212] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[ 96.892494] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[ 96.902945] usbcore: registered new interface driver mceusb
[ 96.926463] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 96.941142] hidraw: raw HID events driver (C) Jiri Kosina
[ 96.942748] [drm] fb mappable at 0xD0141000
[ 96.942752] [drm] vram apper at 0xD0000000
[ 96.942753] [drm] size 8294400
[ 96.942754] [drm] fb depth is 24
[ 96.942755] [drm] pitch is 7680
[ 96.942840] fbcon: radeondrmfb (fb0) is primary device
[ 96.948917] Console: switching to colour frame buffer device 240x67
[ 96.965382] usbcore: registered new interface driver usbhid
[ 96.965383] usbhid: USB HID core driver
[ 96.967247] radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device
[ 96.967249] radeon 0000:01:05.0: registered panic notifier
[ 96.967925] [drm] Initialized radeon 2.36.0 20080528 for 0000:01:05.0 on minor 0
[ 96.968067] hda-intel 0000:01:05.1: Using LPIB position fix
[ 96.971476] hda-intel 0000:01:05.1: Enable sync_write for stable communication
[ 96.981775] HDMI ATI/AMD: no speaker allocation for ELD
[ 96.981873] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:05.1/sound/card1/input8
[ 97.166324] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/input/input9
[ 97.166713] hid-generic 0003:093A:2521.0001: input,hidraw0: USB HID v1.11 Mouse [USB OPTICAL MOUSE] on usb-0000:00:12.0-1/input0
[ 97.168240] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input10
[ 97.170417] hid-generic 0003:046D:C326.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:12.0-2/input0
[ 97.175202] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.1/input/input11
[ 97.175404] hid-generic 0003:046D:C326.0003: input,hiddev0,hidraw2: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:12.0-2/input1
[ 97.637120] init: failsafe main process (791) killed by TERM signal
[ 97.637765] init: samba-ad-dc main process (793) terminated with status 1
[ 97.659795] Bluetooth: Core ver 2.17
[ 97.659821] NET: Registered protocol family 31
[ 97.659822] Bluetooth: HCI device and connection manager initialized
[ 97.659832] Bluetooth: HCI socket layer initialized
[ 97.659834] Bluetooth: L2CAP socket layer initialized
[ 97.659838] Bluetooth: SCO socket layer initialized
[ 97.664854] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 97.664858] Bluetooth: BNEP filters: protocol multicast
[ 97.664868] Bluetooth: BNEP socket layer initialized
[ 97.726846] Bluetooth: RFCOMM TTY layer initialized
[ 97.726862] Bluetooth: RFCOMM socket layer initialized
[ 97.726873] Bluetooth: RFCOMM ver 1.11
[ 97.777262] type=1400 audit(1410815045.656:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=917 comm="apparmor_parser"
[ 97.777272] type=1400 audit(1410815045.656:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=917 comm="apparmor_parser"
[ 97.777658] type=1400 audit(1410815045.656:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=917 comm="apparmor_parser"
[ 97.822124] init: cups main process (927) killed by HUP signal
[ 97.822139] init: cups main process ended, respawning
[ 97.842877] type=1400 audit(1410815045.720:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=982 comm="apparmor_parser"
[ 97.993420] r8169 0000:02:00.0 eth0: link down
[ 97.993452] r8169 0000:02:00.0 eth0: link down
[ 97.993480] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 97.993776] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 98.332123] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[ 98.334369] vboxdrv: Found 3 processor cores.
[ 98.334597] vboxdrv: fAsync=0 offMin=0x3ca offMax=0x13e8
[ 98.334675] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 98.334676] vboxdrv: Successfully loaded version 4.3.10_Ubuntu (interface 0x001a0007).
[ 98.373378] vboxpci: IOMMU not found (not registered)
[ 98.771820] init: plymouth-upstart-bridge main process ended, respawning
[ 98.779089] init: plymouth-upstart-bridge main process (1293) terminated with status 1
[ 98.779105] init: plymouth-upstart-bridge main process ended, respawning
[ 99.496114] r8169 0000:02:00.0 eth0: link up
[ 99.496129] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 112.729156] systemd-hostnamed[2438]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[ 127.868383] audit_printk_skb: 150 callbacks suppressed
[ 127.868387] type=1400 audit(1410815074.915:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2532 comm="apparmor_parser"
[ 127.868394] type=1400 audit(1410815074.915:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2532 comm="apparmor_parser"
[ 127.868781] type=1400 audit(1410815074.915:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2532 comm="apparmor_parser"Il y a des lags importants : de 3'' à 33'', il ne se passe rien, et il y a plein de "ATA bus error".
De même, de 34'' à 64''.
Puis de 64'' à 95'', et là, le sata est limité à 3Gbps au lieu de 6
Puis de 99'' à 112'', et de même de 112'' à 127''.
J'ai fait un test de mon ssd avec smartmontool (un long), et il n'y a eu aucun souci.
La carte mère est hs ?
Si quelqu'un peut m'aider, ce serait super.
Merci,
Atis
Dernière modification par atis (Le 16/09/2014, à 08:52)
Hors ligne