#1 Le 27/09/2014, à 10:00
- ordinel
Ordinateur et démarrage ralenti après mise à jour
Bonjour,
J'ai installé ubuntu 14.10 récemment et je dois dire que mon ordi est assez ralenti depuis! Notamment le démarrage qui est ultra lent et des fenêtres "problem system..." qui s'ouvrent de temps en temps! Il a sûrement besoin d'un bon coup de nettoyage, mais j'ai déjà suivi les conseils de cette page: http://doc.ubuntu-fr.org/nettoyer_ubuntu mais ça n'a pas changé grand chose!
J'ai déjà posté une discussion à ce sujet, mais personne n'a pu résoudre mon problème, en revanche la source du ralentissement viendrait peut-être de mon système qui cherche systématiquement à interagir avec un périphérique même si aucun n'est branché!
C'est apparemment ce qui ressortirait de la commande
dmesg(je m'y connais pas assez pour le savoir moi même)
[ 0.823430] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 0.823432] platform eisa.0: EISA: Detected 0 cards
[ 0.823443] cpufreq-nforce2: No nForce2 chipset.
[ 0.823447] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.823616] TCP: cubic registered
[ 0.823751] NET: Registered protocol family 10
[ 0.824026] NET: Registered protocol family 17
[ 0.824041] Key type dns_resolver registered
[ 0.824254] Using IPI No-Shortcut mode
[ 0.824349] Loading compiled-in X.509 certificates
[ 0.828817] Loaded X.509 cert 'Magrathea: Glacier signing key: a28db5fd6e299cce4947dacaa66f459db4acce24'
[ 0.828835] registered taskstats version 1
[ 0.831669] Key type trusted registered
[ 0.834238] Key type encrypted registered
[ 0.836800] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.836806] IMA: No TPM chip found, activating TPM-bypass!
[ 0.837161] regulator-dummy: disabling
[ 0.837217] Magic number: 14:581:627
[ 0.837329] rtc_cmos 00:05: setting system clock to 2014-09-27 09:37:39 UTC (1411810659)
[ 0.837997] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.837999] EDD information not available.
[ 0.838086] PM: Hibernation image not present or could not be loaded.
[ 0.863227] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.084788] isapnp: No Plug & Play device found
[ 1.119218] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.119263] usb 1-2: new high-speed USB device number 2 using ehci-pci
[ 1.130386] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.264090] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.264223] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.272292] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T50N, RP05, max UDMA/133
[ 1.272365] ata1.00: ATA-8: ST9250827AS, 3.AAA, max UDMA/133
[ 1.272368] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.288327] ata1.00: configured for UDMA/133
[ 1.288339] ata2.00: configured for UDMA/133
[ 1.288480] scsi 0:0:0:0: Direct-Access ATA ST9250827AS 3.AA PQ: 0 ANSI: 5
[ 1.288565] usb 1-2: New USB device found, idVendor=05c8, idProduct=0111
[ 1.288569] usb 1-2: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 1.288572] usb 1-2: Product: FE03FF-99
[ 1.288574] usb 1-2: Manufacturer: Foxlink
[ 1.288676] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.288703] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.288792] sd 0:0:0:0: [sda] Write Protect is off
[ 1.288796] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.288818] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.400062] usb 1-3: new high-speed USB device number 3 using ehci-pci
[ 1.402854] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T50N RP05 PQ: 0 ANSI: 5
[ 1.404413] sda: sda1 < sda5 sda6 sda7 sda8 >
[ 1.404995] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.512947] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.512951] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.513115] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.513239] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.513789] Freeing unused kernel memory: 872K (c19b9000 - c1a93000)
[ 1.513853] Write protecting the kernel text: 6540k
[ 1.513964] Write protecting the kernel read-only data: 2768k
[ 1.513966] NX-protecting the kernel data: 5748k
[ 1.532620] systemd-udevd[104]: starting version 204
[ 1.591555] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.591570] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.591821] r8169 0000:02:00.0: irq 41 for MSI/MSI-X
[ 1.592750] r8169 0000:02:00.0 eth0: RTL8102e at 0xf8416000, 00:1e:68:f5:c2:ed, XID 04a00000 IRQ 41
[ 1.697956] usb 1-3: New USB device found, idVendor=18e8, idProduct=6229
[ 1.697961] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.697964] usb 1-3: Product: 802.11 bg WLAN
[ 1.697967] usb 1-3: Manufacturer: Ralink
[ 1.808067] usb 2-4: new high-speed USB device number 2 using ehci-pci
[ 1.951164] usb 2-4: New USB device found, idVendor=0bda, idProduct=0158
[ 1.951170] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.951174] usb 2-4: Product: USB2.0-CRW
[ 1.951177] usb 2-4: Manufacturer: Generic
[ 1.951179] usb 2-4: SerialNumber: 20071114173400000
[ 1.965328] usbcore: registered new interface driver usb-storage
[ 1.970565] ums-realtek 2-4:1.0: USB Mass Storage device detected
[ 1.973394] scsi4 : usb-storage 2-4:1.0
[ 1.973496] usbcore: registered new interface driver ums-realtek
[ 2.351283] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 2.415889] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.3, id: 0x81a0b2, caps: 0xa04711/0xa00000/0x0, board id: 3655, fw id: 438616
[ 2.463883] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input11
[ 2.949592] random: nonblocking pool is initialized
[ 2.974317] scsi 4:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 2.974653] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 2.978413] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 17.888998] Adding 2928636k swap on /dev/sda6. Priority:-1 extents:1 across:2928636k FS
[ 19.120349] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.294815] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 19.312160] systemd-udevd[316]: starting version 204
[ 19.483121] lp: driver loaded but no devices found
[ 19.511827] ppdev: user-space parallel port driver
[ 19.609503] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[ 19.648307] [drm] Initialized drm 1.1.0 20060810
[ 19.720753] [drm] Memory usable by graphics device = 2048M
[ 19.720759] checking generic (d0000000 3f0000) vs hw (d0000000 10000000)
[ 19.720762] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 19.720788] Console: switching to colour dummy device 80x25
[ 19.746757] i915 0000:00:02.0: irq 42 for MSI/MSI-X
[ 19.746773] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 19.746776] [drm] Driver supports precise vblank timestamp query.
[ 19.746854] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 19.828902] type=1400 audit(1411803478.488:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=387 comm="apparmor_parser"
[ 19.828912] type=1400 audit(1411803478.488:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=387 comm="apparmor_parser"
[ 19.828919] type=1400 audit(1411803478.488:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=387 comm="apparmor_parser"
[ 19.829556] type=1400 audit(1411803478.488:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=387 comm="apparmor_parser"
[ 19.829567] type=1400 audit(1411803478.488:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=387 comm="apparmor_parser"
[ 19.829895] type=1400 audit(1411803478.488:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=387 comm="apparmor_parser"
[ 19.994395] fbcon: inteldrmfb (fb0) is primary device
[ 20.407656] Linux video capture interface: v2.00
[ 20.419186] Console: switching to colour frame buffer device 160x50
[ 20.424651] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 20.424655] i915 0000:00:02.0: registered panic notifier
[ 20.427241] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 20.445602] cfg80211: Calling CRDA to update world regulatory domain
[ 20.446827] uvcvideo: Found UVC 1.00 device FE03FF-99 (05c8:0111)
[ 20.448907] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 20.448932] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 20.456534] acpi device:05: registered as cooling_device3
[ 20.456621] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input12
[ 20.462873] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 20.464101] ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[ 20.464109] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 20.464114] ACPI Warning: 0x000011b0-0x000011bf SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[ 20.464119] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 20.464121] ACPI Warning: 0x00001180-0x000011af SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[ 20.464126] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 20.464128] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 20.477382] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 20.481783] input: FE03FF-99 as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input13
[ 20.481981] usbcore: registered new interface driver uvcvideo
[ 20.481985] USB Video Class driver (1.1.1)
[ 20.507529] SKU: Nid=0x1d sku_cfg=0x4016892d
[ 20.507533] SKU: port_connectivity=0x1
[ 20.507535] SKU: enable_pcbeep=0x1
[ 20.507536] SKU: check_sum=0x00000006
[ 20.507538] SKU: customization=0x00000089
[ 20.507540] SKU: external_amp=0x5
[ 20.507541] SKU: platform_type=0x1
[ 20.507543] SKU: swap=0x0
[ 20.507545] SKU: override=0x1
[ 20.507734] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 20.507736] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 20.507739] hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 20.507740] mono: mono_out=0x0
[ 20.507742] inputs:
[ 20.507744] Internal Mic=0x19
[ 20.507747] Mic=0x18
[ 20.507749] realtek: No valid SSID, checking pincfg 0x4016892d for NID 0x1d
[ 20.507751] realtek: Enabling init ASM_ID=0x892d CODEC_ID=10ec0272
[ 20.515064] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 20.515182] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 20.624181] usb 1-3: reset high-speed USB device number 3 using ehci-pci
[ 21.110067] ieee80211 phy0: rt2x00_set_chip: Info - Chipset detected - rt: 2573, rf: 0002, rev: 000a
[ 21.119187] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 21.120221] usbcore: registered new interface driver rt73usb
[ 21.314216] cfg80211: World regulatory domain updated:
[ 21.314221] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 21.314224] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 21.314227] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 21.314229] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 21.314231] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 21.314234] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 23.189238] init: failsafe main process (599) killed by TERM signal
[ 23.979419] Bluetooth: Core ver 2.17
[ 23.979515] NET: Registered protocol family 31
[ 23.979518] Bluetooth: HCI device and connection manager initialized
[ 23.980677] Bluetooth: HCI socket layer initialized
[ 23.980684] Bluetooth: L2CAP socket layer initialized
[ 23.980696] Bluetooth: SCO socket layer initialized
[ 24.004287] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 24.004292] Bluetooth: BNEP filters: protocol multicast
[ 24.004303] Bluetooth: BNEP socket layer initialized
[ 24.014608] Bluetooth: RFCOMM TTY layer initialized
[ 24.014626] Bluetooth: RFCOMM socket layer initialized
[ 24.014635] Bluetooth: RFCOMM ver 1.11
[ 24.190537] type=1400 audit(1411803482.848:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=675 comm="apparmor_parser"
[ 24.190548] type=1400 audit(1411803482.848:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=675 comm="apparmor_parser"
[ 24.191162] type=1400 audit(1411803482.848:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=675 comm="apparmor_parser"
[ 25.009836] init: cups main process (676) killed by HUP signal
[ 25.009856] init: cups main process ended, respawning
[ 27.596262] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt73.bin'
[ 27.602996] init: samba-ad-dc main process (732) terminated with status 1
[ 27.709282] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 1.7
[ 27.785484] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 27.785896] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 27.801236] r8169 0000:02:00.0 eth0: link down
[ 27.801278] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 27.801805] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 28.434843] type=1400 audit(1411803487.092:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=843 comm="apparmor_parser"
[ 28.434858] type=1400 audit(1411803487.092:12): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=843 comm="apparmor_parser"
[ 28.435284] type=1400 audit(1411803487.092:13): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="chromium" pid=843 comm="apparmor_parser"
[ 28.438979] type=1400 audit(1411803487.096:14): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=844 comm="apparmor_parser"
[ 28.438994] type=1400 audit(1411803487.096:15): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=844 comm="apparmor_parser"
[ 28.439001] type=1400 audit(1411803487.096:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=844 comm="apparmor_parser"
[ 28.439645] type=1400 audit(1411803487.096:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=844 comm="apparmor_parser"
[ 28.439655] type=1400 audit(1411803487.096:18): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=844 comm="apparmor_parser"
[ 28.439965] type=1400 audit(1411803487.096:19): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=844 comm="apparmor_parser"
[ 28.454739] type=1400 audit(1411803487.112:20): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=846 comm="apparmor_parser"
[ 30.297256] wlan0: authenticate with 00:1b:4f:6a:a0:f2
[ 30.356266] wlan0: send auth to 00:1b:4f:6a:a0:f2 (try 1/3)
[ 30.358209] wlan0: authenticated
[ 30.360145] wlan0: associate with 00:1b:4f:6a:a0:f2 (try 1/3)
[ 30.361834] wlan0: RX AssocResp from 00:1b:4f:6a:a0:f2 (capab=0x401 status=0 aid=3)
[ 30.372318] wlan0: associated
[ 30.372356] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 30.372419] cfg80211: Calling CRDA for country: FR
[ 30.395214] wlan0: authenticate with 70:52:c5:9c:0f:52
[ 30.406999] wlan0: send auth to 70:52:c5:9c:0f:52 (try 1/3)
[ 30.407106] cfg80211: Calling CRDA to update world regulatory domain
[ 30.409044] wlan0: authenticated
[ 30.412821] wlan0: associate with 70:52:c5:9c:0f:52 (try 1/3)
[ 30.413963] cfg80211: World regulatory domain updated:
[ 30.413967] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 30.413970] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 30.413973] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 30.413976] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 30.413978] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 30.413981] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 30.414622] wlan0: RX AssocResp from 70:52:c5:9c:0f:52 (capab=0x401 status=0 aid=2)
[ 30.426935] wlan0: associated
[ 30.426980] wlan0: deauthenticated from 70:52:c5:9c:0f:52 (Reason: 1)
[ 30.427010] cfg80211: Calling CRDA for country: FR
[ 30.437589] cfg80211: Regulatory domain changed to country: FR
[ 30.437597] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 30.437599] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 30.437602] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 30.437604] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 30.437607] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[ 30.437609] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[ 30.458232] cfg80211: Calling CRDA to update world regulatory domain
[ 30.462871] cfg80211: World regulatory domain updated:
[ 30.462877] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 30.462880] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 30.462883] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 30.462885] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 30.462888] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 30.462890] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 30.836771] wlan0: authenticate with 00:1b:4f:6a:a0:f2
[ 30.876384] wlan0: send auth to 00:1b:4f:6a:a0:f2 (try 1/3)
[ 30.879674] wlan0: authenticated
[ 30.880182] wlan0: associate with 00:1b:4f:6a:a0:f2 (try 1/3)
[ 30.881840] wlan0: RX AssocResp from 00:1b:4f:6a:a0:f2 (capab=0x401 status=0 aid=3)
[ 30.892571] wlan0: associated
[ 30.892624] cfg80211: Calling CRDA for country: FR
[ 30.895389] wlan0: deauthenticated from 00:1b:4f:6a:a0:f2 (Reason: 1)
[ 30.897282] cfg80211: Regulatory domain changed to country: FR
[ 30.897287] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 30.897290] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 30.897292] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 30.897294] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 30.897297] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[ 30.897299] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[ 30.929000] cfg80211: Calling CRDA to update world regulatory domain
[ 30.933638] cfg80211: World regulatory domain updated:
[ 30.933644] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 30.933647] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 30.933650] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 30.933653] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 30.933655] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 30.933657] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 31.316909] wlan0: authenticate with 00:1b:4f:6a:b9:12
[ 31.375888] wlan0: send auth to 00:1b:4f:6a:b9:12 (try 1/3)
[ 31.378729] wlan0: authenticated
[ 31.380087] wlan0: associate with 00:1b:4f:6a:b9:12 (try 1/3)
[ 31.381845] wlan0: RX AssocResp from 00:1b:4f:6a:b9:12 (capab=0x1 status=0 aid=2)
[ 31.390326] wlan0: associated
[ 31.390403] cfg80211: Calling CRDA for country: FR
[ 31.394723] cfg80211: Regulatory domain changed to country: FR
[ 31.394729] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 31.394731] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 31.394734] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 31.394736] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 31.394738] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[ 31.394741] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[ 33.920191] init: plymouth-upstart-bridge main process ended, respawning
[ 33.940138] init: plymouth-upstart-bridge main process ended, respawning
[ 53.777160] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 53.779404] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 53.779409] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 54.387872] audit_printk_skb: 123 callbacks suppressed
[ 54.387877] type=1400 audit(1411803513.044:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2155 comm="apparmor_parser"
[ 54.387888] type=1400 audit(1411803513.044:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2155 comm="apparmor_parser"
[ 54.388570] type=1400 audit(1411803513.048:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2155 comm="apparmor_parser"
[ 105.492933] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 105.495310] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 105.495317] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 157.205214] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 157.207466] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 157.207471] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 194.260086] usb 2-3: new high-speed USB device number 3 using ehci-pci
[ 194.398588] usb 2-3: New USB device found, idVendor=13fe, idProduct=3e00
[ 194.398595] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 194.398599] usb 2-3: Product: USB DISK 2.0
[ 194.398601] usb 2-3: Manufacturer:
[ 194.398604] usb 2-3: SerialNumber: 0707C309D7A6CF1D
[ 194.400057] usb-storage 2-3:1.0: USB Mass Storage device detected
[ 194.400532] scsi5 : usb-storage 2-3:1.0
[ 195.430611] scsi 5:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 4
[ 195.437849] sd 5:0:0:0: Attached scsi generic sg3 type 0
[ 197.683230] sd 5:0:0:0: [sdc] 15634432 512-byte logical blocks: (8.00 GB/7.45 GiB)
[ 197.683817] sd 5:0:0:0: [sdc] Write Protect is off
[ 197.683823] sd 5:0:0:0: [sdc] Mode Sense: 23 00 00 00
[ 197.684468] sd 5:0:0:0: [sdc] No Caching mode page found
[ 197.684476] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[ 197.690343] sd 5:0:0:0: [sdc] No Caching mode page found
[ 197.690352] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[ 197.711279] sdc: sdc1
[ 197.721598] sd 5:0:0:0: [sdc] No Caching mode page found
[ 197.721607] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[ 197.721613] sd 5:0:0:0: [sdc] Attached SCSI removable disk
[ 198.125829] FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 208.921242] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 208.923480] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 208.923489] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 260.625269] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 260.627484] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 260.627491] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 312.340988] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 312.343231] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 312.343235] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 318.098482] usb 2-3: USB disconnect, device number 3
[ 364.057043] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 364.059283] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 364.059287] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 367.495123] perf samples too long (2519 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[ 415.761146] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 415.763390] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 415.763397] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 467.473006] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 467.475248] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 467.475256] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 519.184923] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 519.187307] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 519.187317] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 570.898563] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 570.900803] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 570.900809] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 576.844219] init: upstart-udev-bridge main process (307) terminated with status 1
[ 576.844244] init: upstart-udev-bridge main process ended, respawning
[ 576.844653] init: upstart-socket-bridge main process (546) terminated with status 1
[ 576.844673] init: upstart-socket-bridge main process ended, respawning
[ 576.844960] init: upstart-file-bridge main process (666) terminated with status 1
[ 576.844979] init: upstart-file-bridge main process ended, respawning
[ 622.612969] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 622.615344] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 622.615351] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 674.320969] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 674.323205] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 674.323213] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 726.033888] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 726.036131] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 726.036137] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 777.744961] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 777.747210] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 777.747217] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 829.461019] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 829.464372] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 829.464379] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 881.169451] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 881.171685] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 881.171692] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 882.033075] perf samples too long (5002 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
[ 902.587893] type=1400 audit(1411804361.245:65): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=6721 comm="apparmor_parser"
[ 902.587909] type=1400 audit(1411804361.245:66): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=6721 comm="apparmor_parser"
[ 902.592636] type=1400 audit(1411804361.253:67): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=6721 comm="apparmor_parser"
[ 932.882928] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 932.885256] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 932.885262] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 984.593069] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 984.595329] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 984.595337] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 1036.309179] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 1036.311889] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 1036.311896] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 1088.025111] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 1088.027361] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 1088.027369] sd 4:0:0:0: [sdb] Assuming drive cache: write throughVoilà, merci par avance! 
Hors ligne
#2 Le 28/09/2014, à 12:01
- Caribou22
Re : Ordinateur et démarrage ralenti après mise à jour
Bonjour,
La 14.10 étant encore une version instable, pourquoi l'avoir installée ?
Je te conseille de rester sur la 14.04 qui est maintenue jusqu'en 2019.
Hors ligne
#3 Le 10/10/2014, à 23:49
- ordinel
Re : Ordinateur et démarrage ralenti après mise à jour
non je me suis trompee, cest 14.04. j'ai 1 souci depuis quelque temps mon clavier bug des touches ne correspondent plus aux lettres du clavier comment faire pour regler le probleme ?
Hors ligne