#1 Le 23/10/2014, à 21:05
- Mirmar10
Comment accéder a Ubuntu Après Installation ! (Débutant) [RESOLU]
Bonsoir , je suis débutant dans l'univer de Ubuntu donc excusez moi si j'ai pas posté ma question dans la bonne section
Mon problème est le suivant : j'ai Installé Ubuntu correctement dans une nouvelle partition avec un swap de 7gb et l'ordinateur a redémarrer après
l'installation mais le problème que le menu (Grub je croix) ne se lance pas et l'ordinateur s'ouvre directement sur Windows 7 ! qu'est ce que je dois faire pour avoir ce menu et enfin accéder a Ubuntu ?
Merci
Dernière modification par Mirmar10 (Le 24/10/2014, à 02:01)
Hors ligne
#2 Le 23/10/2014, à 21:54
- Caribou22
Re : Comment accéder a Ubuntu Après Installation ! (Débutant) [RESOLU]
Bonsoir,
Tu as le problème inverse à celui-ci : http://forum.ubuntu-fr.org/viewtopic.php?id=1704671
Du coup, la première chose à faire est la même que dans mon post 2 (je m'auto-cite du coup ^^ ) :
Bonjour,
Peux-tu nous envoyer un rapport boot-info pour que l'on y voie plus clair ? Voici la doc si tu ne connais pas : http://doc.ubuntu-fr.org/boot-repair
Tu dois le faire en ouvrant une session live (depuis ton support d'installation, CD ou USB)
Après nous avoir envoyé le boot-info, tu pourras aussi tester la réparation recommandée qui résoudra peut-être ton problème
Dernière modification par Caribou22 (Le 23/10/2014, à 21:55)
Hors ligne
#3 Le 24/10/2014, à 01:49
- Mirmar10
Re : Comment accéder a Ubuntu Après Installation ! (Débutant) [RESOLU]
merci pour votre réponse Caribou22 , voila mon rapport boot info http://paste.ubuntu.com/8647119/ et je vais éditer ce poste si la réparation recommendé répare le problème encore merci une autre fois.
EDIT : Voila après la réparation recommendé le menu Grub a apparu enfin et j'ai pu accéder a Ubuntu Merci encore Caribou22.
Dernière modification par Mirmar10 (Le 24/10/2014, à 01:59)
Hors ligne
#4 Le 24/10/2014, à 06:00
- malbo
Re : Comment accéder a Ubuntu Après Installation ! (Débutant) [RESOLU]
Ton Boot-Info est là :
Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 23Dec2013]
============================= Boot Info Summary: ===============================
=> Windows 7/8/2012 is installed in the MBR of /dev/sda.
sda1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 7/2008: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 7
Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe
sda2: __________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________________________________
File system: ext4
Boot sector type: Grub2 (v1.99-2.00)
Boot sector info: Grub2 (v1.99) is installed in the boot sector of sda5
and looks at sector 1885035208 of the same hard drive
for core.img. core.img is at this location and looks
in partition 112 for .
Operating System: Ubuntu 14.04.1 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/grub/i386-pc/core.img
sda6: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 1,851,121,663 1,851,119,616 7 NTFS / exFAT / HPFS
/dev/sda2 1,851,123,710 1,953,523,711 102,400,002 5 Extended
/dev/sda5 1,851,123,712 1,939,011,583 87,887,872 83 Linux
/dev/sda6 1,939,013,632 1,953,523,711 14,510,080 82 Linux swap / Solaris
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 F8A21421A213E2C4 ntfs
/dev/sda5 d5c4288d-715c-424e-99fa-6d86542cda16 ext4
/dev/sda6 1ea03cc4-85b6-480b-80ef-4300df182e23 swap
/dev/sr0 iso9660 Ubuntu 14.04.1 LTS amd64
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sr0 /cdrom iso9660 (ro,noatime)
=========================== sda5/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 d5c4288d-715c-424e-99fa-6d86542cda16
else
search --no-floppy --fs-uuid --set=root d5c4288d-715c-424e-99fa-6d86542cda16
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=-1
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=10
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=10
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-d5c4288d-715c-424e-99fa-6d86542cda16' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 d5c4288d-715c-424e-99fa-6d86542cda16
else
search --no-floppy --fs-uuid --set=root d5c4288d-715c-424e-99fa-6d86542cda16
fi
linux /boot/vmlinuz-3.13.0-32-generic root=UUID=d5c4288d-715c-424e-99fa-6d86542cda16 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-32-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-d5c4288d-715c-424e-99fa-6d86542cda16' {
menuentry 'Ubuntu, avec Linux 3.13.0-32-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-32-generic-advanced-d5c4288d-715c-424e-99fa-6d86542cda16' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 d5c4288d-715c-424e-99fa-6d86542cda16
else
search --no-floppy --fs-uuid --set=root d5c4288d-715c-424e-99fa-6d86542cda16
fi
echo 'Chargement de Linux 3.13.0-32-generic…'
linux /boot/vmlinuz-3.13.0-32-generic root=UUID=d5c4288d-715c-424e-99fa-6d86542cda16 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-32-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-32-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-32-generic-recovery-d5c4288d-715c-424e-99fa-6d86542cda16' {
recordfail
load_video
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 d5c4288d-715c-424e-99fa-6d86542cda16
else
search --no-floppy --fs-uuid --set=root d5c4288d-715c-424e-99fa-6d86542cda16
fi
echo 'Chargement de Linux 3.13.0-32-generic…'
linux /boot/vmlinuz-3.13.0-32-generic root=UUID=d5c4288d-715c-424e-99fa-6d86542cda16 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-32-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 d5c4288d-715c-424e-99fa-6d86542cda16
else
search --no-floppy --fs-uuid --set=root d5c4288d-715c-424e-99fa-6d86542cda16
fi
knetbsd /boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 d5c4288d-715c-424e-99fa-6d86542cda16
else
search --no-floppy --fs-uuid --set=root d5c4288d-715c-424e-99fa-6d86542cda16
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows 7 (loader) (sur /dev/sda1)' --class windows --class os $menuentry_id_option 'osprober-chain-F8A21421A213E2C4' {
insmod part_msdos
insmod ntfs
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 F8A21421A213E2C4
else
search --no-floppy --fs-uuid --set=root F8A21421A213E2C4
fi
parttool ${root} hidden-
chainloader +1
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
set timeout=10
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda5/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda5 during installation
UUID=d5c4288d-715c-424e-99fa-6d86542cda16 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda6 during installation
UUID=1ea03cc4-85b6-480b-80ef-4300df182e23 none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda5: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
=============================== StdErr Messages: ===============================
cat: write error: Broken pipe
cat: /tmp/BootInfo-XHPfkMsm/Tmp_Log: No such file or directory
File descriptor 9 (/proc/6282/mounts) leaked on lvscan invocation. Parent PID 13042: bash
File descriptor 63 (pipe:[52363]) leaked on lvscan invocation. Parent PID 13042: bash
No volume groups found
ADDITIONAL INFORMATION :
=================== log of boot-repair 2014-10-23__23h40 ===================
boot-repair version : 3.199~ppa40~saucy
boot-sav version : 3.199~ppa40~saucy
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 3.199~ppa40~saucy
boot-repair is executed in live-session (Ubuntu 14.04.1 LTS, trusty, Ubuntu, x86_64)
ls: cannot access /home/usr/.config: No such file or directory
CPU op-mode(s): 32-bit, 64-bit
file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity
=================== os-prober:
/dev/sda1:Windows 7 (loader):Windows:chain
/dev/sda5:Ubuntu 14.04.1 LTS (14.04):Ubuntu:linux
=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/sda1: UUID="F8A21421A213E2C4" TYPE="ntfs"
/dev/sda5: UUID="d5c4288d-715c-424e-99fa-6d86542cda16" TYPE="ext4"
/dev/sda6: UUID="1ea03cc4-85b6-480b-80ef-4300df182e23" TYPE="swap"
/dev/sr0: LABEL="Ubuntu 14.04.1 LTS amd64" TYPE="iso9660"
1 disks with OS, 2 OS : 1 Linux, 0 MacOS, 1 Windows, 0 unknown type OS.
Warning: extended partition does not start at a cylinder boundary.
DOS and Linux will interpret the contents differently.
=================== sda5/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 juil. 22 22:21 grub.d
total 76
-rwxr-xr-x 1 root root 9424 mai 15 19:02 00_header
-rwxr-xr-x 1 root root 6058 mai 8 12:08 05_debian_theme
-rwxr-xr-x 1 root root 11608 mai 15 19:02 10_linux
-rwxr-xr-x 1 root root 10412 mai 15 19:02 20_linux_xen
-rwxr-xr-x 1 root root 1992 mars 12 2014 20_memtest86+
-rwxr-xr-x 1 root root 11692 mai 15 19:02 30_os-prober
-rwxr-xr-x 1 root root 1416 mai 15 19:02 30_uefi-firmware
-rwxr-xr-x 1 root root 214 mai 15 19:02 40_custom
-rwxr-xr-x 1 root root 216 mai 15 19:02 41_custom
-rw-r--r-- 1 root root 483 mai 15 19:02 README
=================== sda5/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
=================== UEFI/Legacy mode:
This live-session is not in EFI-mode.
SecureBoot maybe enabled.
=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, bootmgr, is-winboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda1.
sda5 : sda, not-sepboot, grubenv-ok grub2, grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, /mnt/boot-sav/sda5.
sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 2048 sectors * 512 bytes
=================== parted -l:
Model: ATA ST1000LM024 HN-M (scsi)
Disk /dev/sda: 1000GB
Sector size (logical/physical): 512B/4096B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 948GB 948GB primary ntfs boot
2 948GB 1000GB 52.4GB extended
5 948GB 993GB 45.0GB logical ext4
6 993GB 1000GB 7429MB logical linux-swap(v1)
Error: Can't have a partition outside the disk!
=================== parted -lm:
BYT;
/dev/sda:1000GB:scsi:512:4096:msdos:ATA ST1000LM024 HN-M;
1:1049kB:948GB:948GB:ntfs::boot;
2:948GB:1000GB:52.4GB:::;
5:948GB:993GB:45.0GB:ext4::;
6:993GB:1000GB:7429MB:linux-swap(v1)::;
Error: Can't have a partition outside the disk!
=================== mount:
/cow on / type overlayfs (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sr0 on /cdrom type iso9660 (ro,noatime)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=ubuntu)
/dev/sda1 on /mnt/boot-sav/sda1 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda5 on /mnt/boot-sav/sda5 type ext4 (rw)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda5 sda6 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd full fuse hidraw0 hidraw1 hpet input kmsg kvm log mapper mcelog mei mem net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda5 sda6 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom v4l vga_arbiter vhci vhost-net video0 zero
ls /dev/mapper: control
=================== hexdump -n512 -C /dev/sda1
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 00 00 80 00 80 00 ff d7 55 6e 00 00 00 00 |..........Un....|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 c4 e2 13 a2 21 14 a2 f8 |............!...|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 28 10 b9 d8 0f fc f3 aa e9 5f 01 90 90 66 60 1e |(........_...f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a0 f8 01 e8 09 00 |...u...fa.......|
00000170 a0 fb 01 e8 03 00 f4 eb fd b4 01 8b f0 ac 3c 00 |..............<.|
00000180 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 |t.............A |
00000190 64 69 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 |disk read error |
000001a0 6f 63 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d |occurred...BOOTM|
000001b0 47 52 20 69 73 20 6d 69 73 73 69 6e 67 00 0d 0a |GR is missing...|
000001c0 42 4f 4f 54 4d 47 52 20 69 73 20 63 6f 6d 70 72 |BOOTMGR is compr|
000001d0 65 73 73 65 64 00 0d 0a 50 72 65 73 73 20 43 74 |essed...Press Ct|
000001e0 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 6f 20 72 65 |rl+Alt+Del to re|
000001f0 73 74 61 72 74 0d 0a 00 8c a9 be d6 00 00 55 aa |start.........U.|
00000200
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/cow overlayfs 3.9G 115M 3.8G 3% /
udev devtmpfs 3.9G 12K 3.9G 1% /dev
tmpfs tmpfs 789M 1.2M 788M 1% /run
/dev/sr0 iso9660 981M 981M 0 100% /cdrom
/dev/loop0 squashfs 939M 939M 0 100% /rofs
none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
tmpfs tmpfs 3.9G 1.1M 3.9G 1% /tmp
none tmpfs 5.0M 4.0K 5.0M 1% /run/lock
none tmpfs 3.9G 80K 3.9G 1% /run/shm
none tmpfs 100M 52K 100M 1% /run/user
/dev/sda1 fuseblk 883G 82G 802G 10% /mnt/boot-sav/sda1
/dev/sda5 ext4 42G 3.5G 36G 9% /mnt/boot-sav/sda5
=================== fdisk -l:
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x0f477ffe
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 1851121663 925559808 7 HPFS/NTFS/exFAT
/dev/sda2 1851123710 1953523711 51200001 5 Extended
Partition 2 does not start on physical sector boundary.
/dev/sda5 1851123712 1939011583 43943936 83 Linux
/dev/sda6 1939013632 1953523711 7255040 82 Linux swap / Solaris
Partition outside the disk détecté.
=================== Default settings
Recommended-Repair
This setting would reinstall the grub2 of sda5 into the MBR of sda.
Additional repair would be performed: unhide-bootmenu-10s
=================== Settings chosen by the user
Boot-Info
This setting will not act on the MBR.
Aucun changement n'a été effectué sur cet ordinateur.
Comme tu as fait la réparation recommandée de Boot-Repair, il a dû faire ce qu'on peut voir dans cet extrait :
=================== Default settings
Recommended-Repair
This setting would reinstall the grub2 of sda5 into the MBR of sda.
Additional repair would be performed: unhide-bootmenu-10s
Et effectivement, cette réparation a permis de démarrer l'ordi sur le menu Grub. Mais Boot-Repair ne fait pas une réparation correcte et il convient de faire une régularisation afin que Grub note bien dans ses tablettes que son chargeur d'amorçage se trouve dans le MBR. Pour ce faire, je te prie de passer la commande suivante depuis une session de ton Ubuntu installé :
sudo debconf-show grub-pc
Hors ligne
#5 Le 29/10/2014, à 14:55
- Mirmar10
Re : Comment accéder a Ubuntu Après Installation ! (Débutant) [RESOLU]
Ton Boot-Info est là :
Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 23Dec2013] ============================= Boot Info Summary: =============================== => Windows 7/8/2012 is installed in the MBR of /dev/sda. sda1: __________________________________________________________________________ File system: ntfs Boot sector type: Windows 7/2008: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe sda2: __________________________________________________________________________ File system: Extended Partition Boot sector type: - Boot sector info: sda5: __________________________________________________________________________ File system: ext4 Boot sector type: Grub2 (v1.99-2.00) Boot sector info: Grub2 (v1.99) is installed in the boot sector of sda5 and looks at sector 1885035208 of the same hard drive for core.img. core.img is at this location and looks in partition 112 for . Operating System: Ubuntu 14.04.1 LTS Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/i386-pc/core.img sda6: __________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: ============================ Drive/Partition Info: ============================= Drive: sda _____________________________________________________________________ Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 * 2,048 1,851,121,663 1,851,119,616 7 NTFS / exFAT / HPFS /dev/sda2 1,851,123,710 1,953,523,711 102,400,002 5 Extended /dev/sda5 1,851,123,712 1,939,011,583 87,887,872 83 Linux /dev/sda6 1,939,013,632 1,953,523,711 14,510,080 82 Linux swap / Solaris "blkid" output: ________________________________________________________________ Device UUID TYPE LABEL /dev/loop0 squashfs /dev/sda1 F8A21421A213E2C4 ntfs /dev/sda5 d5c4288d-715c-424e-99fa-6d86542cda16 ext4 /dev/sda6 1ea03cc4-85b6-480b-80ef-4300df182e23 swap /dev/sr0 iso9660 Ubuntu 14.04.1 LTS amd64 ================================ Mount points: ================================= Device Mount_Point Type Options /dev/loop0 /rofs squashfs (ro,noatime) /dev/sr0 /cdrom iso9660 (ro,noatime) =========================== sda5/boot/grub/grub.cfg: =========================== -------------------------------------------------------------------------------- # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi if [ "${next_entry}" ] ; then set default="${next_entry}" set next_entry= save_env next_entry set boot_once=true else set default="0" fi if [ x"${feature_menuentry_id}" = xy ]; then menuentry_id_option="--id" else menuentry_id_option="" fi export menuentry_id_option if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { if [ x$feature_all_video_module = xy ]; then insmod all_video else insmod efi_gop insmod efi_uga insmod ieee1275_fb insmod vbe insmod vga insmod video_bochs insmod video_cirrus fi } if [ x$feature_default_font_path = xy ] ; then font=unicode else insmod part_msdos insmod ext2 set root='hd0,msdos5' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 d5c4288d-715c-424e-99fa-6d86542cda16 else search --no-floppy --fs-uuid --set=root d5c4288d-715c-424e-99fa-6d86542cda16 fi font="/usr/share/grub/unicode.pf2" fi if loadfont $font ; then set gfxmode=auto load_video insmod gfxterm set locale_dir=$prefix/locale set lang=fr_FR insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ] ; then set timeout=-1 else if [ x$feature_timeout_style = xy ] ; then set timeout_style=menu set timeout=10 # Fallback normal timeout code in case the timeout_style feature is # unavailable. else set timeout=10 fi fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="${1}" if [ "${1}" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ "${recordfail}" != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-d5c4288d-715c-424e-99fa-6d86542cda16' { recordfail load_video gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='hd0,msdos5' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 d5c4288d-715c-424e-99fa-6d86542cda16 else search --no-floppy --fs-uuid --set=root d5c4288d-715c-424e-99fa-6d86542cda16 fi linux /boot/vmlinuz-3.13.0-32-generic root=UUID=d5c4288d-715c-424e-99fa-6d86542cda16 ro quiet splash $vt_handoff initrd /boot/initrd.img-3.13.0-32-generic } submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-d5c4288d-715c-424e-99fa-6d86542cda16' { menuentry 'Ubuntu, avec Linux 3.13.0-32-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-32-generic-advanced-d5c4288d-715c-424e-99fa-6d86542cda16' { recordfail load_video gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='hd0,msdos5' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 d5c4288d-715c-424e-99fa-6d86542cda16 else search --no-floppy --fs-uuid --set=root d5c4288d-715c-424e-99fa-6d86542cda16 fi echo 'Chargement de Linux 3.13.0-32-generic…' linux /boot/vmlinuz-3.13.0-32-generic root=UUID=d5c4288d-715c-424e-99fa-6d86542cda16 ro quiet splash $vt_handoff echo 'Chargement du disque mémoire initial…' initrd /boot/initrd.img-3.13.0-32-generic } menuentry 'Ubuntu, with Linux 3.13.0-32-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-32-generic-recovery-d5c4288d-715c-424e-99fa-6d86542cda16' { recordfail load_video insmod gzio insmod part_msdos insmod ext2 set root='hd0,msdos5' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 d5c4288d-715c-424e-99fa-6d86542cda16 else search --no-floppy --fs-uuid --set=root d5c4288d-715c-424e-99fa-6d86542cda16 fi echo 'Chargement de Linux 3.13.0-32-generic…' linux /boot/vmlinuz-3.13.0-32-generic root=UUID=d5c4288d-715c-424e-99fa-6d86542cda16 ro recovery nomodeset echo 'Chargement du disque mémoire initial…' initrd /boot/initrd.img-3.13.0-32-generic } } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry 'Memory test (memtest86+)' { insmod part_msdos insmod ext2 set root='hd0,msdos5' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 d5c4288d-715c-424e-99fa-6d86542cda16 else search --no-floppy --fs-uuid --set=root d5c4288d-715c-424e-99fa-6d86542cda16 fi knetbsd /boot/memtest86+.elf } menuentry 'Memory test (memtest86+, serial console 115200)' { insmod part_msdos insmod ext2 set root='hd0,msdos5' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 d5c4288d-715c-424e-99fa-6d86542cda16 else search --no-floppy --fs-uuid --set=root d5c4288d-715c-424e-99fa-6d86542cda16 fi linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry 'Windows 7 (loader) (sur /dev/sda1)' --class windows --class os $menuentry_id_option 'osprober-chain-F8A21421A213E2C4' { insmod part_msdos insmod ntfs set root='hd0,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 F8A21421A213E2C4 else search --no-floppy --fs-uuid --set=root F8A21421A213E2C4 fi parttool ${root} hidden- chainloader +1 } set timeout_style=menu if [ "${timeout}" = 0 ]; then set timeout=10 fi ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/30_uefi-firmware ### ### END /etc/grub.d/30_uefi-firmware ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f ${config_directory}/custom.cfg ]; then source ${config_directory}/custom.cfg elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### -------------------------------------------------------------------------------- =============================== sda5/etc/fstab: ================================ -------------------------------------------------------------------------------- # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> # / was on /dev/sda5 during installation UUID=d5c4288d-715c-424e-99fa-6d86542cda16 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda6 during installation UUID=1ea03cc4-85b6-480b-80ef-4300df182e23 none swap sw 0 0 -------------------------------------------------------------------------------- =================== sda5: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) =============================== StdErr Messages: =============================== cat: write error: Broken pipe cat: /tmp/BootInfo-XHPfkMsm/Tmp_Log: No such file or directory File descriptor 9 (/proc/6282/mounts) leaked on lvscan invocation. Parent PID 13042: bash File descriptor 63 (pipe:[52363]) leaked on lvscan invocation. Parent PID 13042: bash No volume groups found ADDITIONAL INFORMATION : =================== log of boot-repair 2014-10-23__23h40 =================== boot-repair version : 3.199~ppa40~saucy boot-sav version : 3.199~ppa40~saucy glade2script version : 3.2.2~ppa47~saucy boot-sav-extra version : 3.199~ppa40~saucy boot-repair is executed in live-session (Ubuntu 14.04.1 LTS, trusty, Ubuntu, x86_64) ls: cannot access /home/usr/.config: No such file or directory CPU op-mode(s): 32-bit, 64-bit file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity =================== os-prober: /dev/sda1:Windows 7 (loader):Windows:chain /dev/sda5:Ubuntu 14.04.1 LTS (14.04):Ubuntu:linux =================== blkid: /dev/loop0: TYPE="squashfs" /dev/sda1: UUID="F8A21421A213E2C4" TYPE="ntfs" /dev/sda5: UUID="d5c4288d-715c-424e-99fa-6d86542cda16" TYPE="ext4" /dev/sda6: UUID="1ea03cc4-85b6-480b-80ef-4300df182e23" TYPE="swap" /dev/sr0: LABEL="Ubuntu 14.04.1 LTS amd64" TYPE="iso9660" 1 disks with OS, 2 OS : 1 Linux, 0 MacOS, 1 Windows, 0 unknown type OS. Warning: extended partition does not start at a cylinder boundary. DOS and Linux will interpret the contents differently. =================== sda5/etc/grub.d/ : drwxr-xr-x 2 root root 4096 juil. 22 22:21 grub.d total 76 -rwxr-xr-x 1 root root 9424 mai 15 19:02 00_header -rwxr-xr-x 1 root root 6058 mai 8 12:08 05_debian_theme -rwxr-xr-x 1 root root 11608 mai 15 19:02 10_linux -rwxr-xr-x 1 root root 10412 mai 15 19:02 20_linux_xen -rwxr-xr-x 1 root root 1992 mars 12 2014 20_memtest86+ -rwxr-xr-x 1 root root 11692 mai 15 19:02 30_os-prober -rwxr-xr-x 1 root root 1416 mai 15 19:02 30_uefi-firmware -rwxr-xr-x 1 root root 214 mai 15 19:02 40_custom -rwxr-xr-x 1 root root 216 mai 15 19:02 41_custom -rw-r--r-- 1 root root 483 mai 15 19:02 README =================== sda5/etc/default/grub : # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 #GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" GRUB_CMDLINE_LINUX="" # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" =================== UEFI/Legacy mode: This live-session is not in EFI-mode. SecureBoot maybe enabled. =================== PARTITIONS & DISKS: sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, bootmgr, is-winboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda1. sda5 : sda, not-sepboot, grubenv-ok grub2, grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, /mnt/boot-sav/sda5. sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 2048 sectors * 512 bytes =================== parted -l: Model: ATA ST1000LM024 HN-M (scsi) Disk /dev/sda: 1000GB Sector size (logical/physical): 512B/4096B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 948GB 948GB primary ntfs boot 2 948GB 1000GB 52.4GB extended 5 948GB 993GB 45.0GB logical ext4 6 993GB 1000GB 7429MB logical linux-swap(v1) Error: Can't have a partition outside the disk! =================== parted -lm: BYT; /dev/sda:1000GB:scsi:512:4096:msdos:ATA ST1000LM024 HN-M; 1:1049kB:948GB:948GB:ntfs::boot; 2:948GB:1000GB:52.4GB:::; 5:948GB:993GB:45.0GB:ext4::; 6:993GB:1000GB:7429MB:linux-swap(v1)::; Error: Can't have a partition outside the disk! =================== mount: /cow on / type overlayfs (rw) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) /dev/sr0 on /cdrom type iso9660 (ro,noatime) /dev/loop0 on /rofs type squashfs (ro,noatime) none on /sys/fs/cgroup type tmpfs (rw) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) tmpfs on /tmp type tmpfs (rw,nosuid,nodev) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755) none on /sys/fs/pstore type pstore (rw) systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd) gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=ubuntu) /dev/sda1 on /mnt/boot-sav/sda1 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096) /dev/sda5 on /mnt/boot-sav/sda5 type ext4 (rw) =================== ls: /sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda5 sda6 size slaves stat subsystem trace uevent /sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent /dev (filtered): autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd full fuse hidraw0 hidraw1 hpet input kmsg kvm log mapper mcelog mei mem net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda5 sda6 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom v4l vga_arbiter vhci vhost-net video0 zero ls /dev/mapper: control =================== hexdump -n512 -C /dev/sda1 00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....| 00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......| 00000020 00 00 00 00 80 00 80 00 ff d7 55 6e 00 00 00 00 |..........Un....| 00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................| 00000040 f6 00 00 00 01 00 00 00 c4 e2 13 a2 21 14 a2 f8 |............!...| 00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..| 00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N| 00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...| 00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......| 00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........| 000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..| 000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.| 000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............| 000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-| 000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..| 000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf| 00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..| 00000110 28 10 b9 d8 0f fc f3 aa e9 5f 01 90 90 66 60 1e |(........_...f`.| 00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...| 00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...| 00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.| 00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........| 00000160 0e 16 00 75 bc 07 1f 66 61 c3 a0 f8 01 e8 09 00 |...u...fa.......| 00000170 a0 fb 01 e8 03 00 f4 eb fd b4 01 8b f0 ac 3c 00 |..............<.| 00000180 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 |t.............A | 00000190 64 69 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 |disk read error | 000001a0 6f 63 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d |occurred...BOOTM| 000001b0 47 52 20 69 73 20 6d 69 73 73 69 6e 67 00 0d 0a |GR is missing...| 000001c0 42 4f 4f 54 4d 47 52 20 69 73 20 63 6f 6d 70 72 |BOOTMGR is compr| 000001d0 65 73 73 65 64 00 0d 0a 50 72 65 73 73 20 43 74 |essed...Press Ct| 000001e0 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 6f 20 72 65 |rl+Alt+Del to re| 000001f0 73 74 61 72 74 0d 0a 00 8c a9 be d6 00 00 55 aa |start.........U.| 00000200 =================== df -Th: Filesystem Type Size Used Avail Use% Mounted on /cow overlayfs 3.9G 115M 3.8G 3% / udev devtmpfs 3.9G 12K 3.9G 1% /dev tmpfs tmpfs 789M 1.2M 788M 1% /run /dev/sr0 iso9660 981M 981M 0 100% /cdrom /dev/loop0 squashfs 939M 939M 0 100% /rofs none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup tmpfs tmpfs 3.9G 1.1M 3.9G 1% /tmp none tmpfs 5.0M 4.0K 5.0M 1% /run/lock none tmpfs 3.9G 80K 3.9G 1% /run/shm none tmpfs 100M 52K 100M 1% /run/user /dev/sda1 fuseblk 883G 82G 802G 10% /mnt/boot-sav/sda1 /dev/sda5 ext4 42G 3.5G 36G 9% /mnt/boot-sav/sda5 =================== fdisk -l: Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x0f477ffe Device Boot Start End Blocks Id System /dev/sda1 * 2048 1851121663 925559808 7 HPFS/NTFS/exFAT /dev/sda2 1851123710 1953523711 51200001 5 Extended Partition 2 does not start on physical sector boundary. /dev/sda5 1851123712 1939011583 43943936 83 Linux /dev/sda6 1939013632 1953523711 7255040 82 Linux swap / Solaris Partition outside the disk détecté. =================== Default settings Recommended-Repair This setting would reinstall the grub2 of sda5 into the MBR of sda. Additional repair would be performed: unhide-bootmenu-10s =================== Settings chosen by the user Boot-Info This setting will not act on the MBR. Aucun changement n'a été effectué sur cet ordinateur.
Comme tu as fait la réparation recommandée de Boot-Repair, il a dû faire ce qu'on peut voir dans cet extrait :
=================== Default settings Recommended-Repair This setting would reinstall the grub2 of sda5 into the MBR of sda. Additional repair would be performed: unhide-bootmenu-10s
Et effectivement, cette réparation a permis de démarrer l'ordi sur le menu Grub. Mais Boot-Repair ne fait pas une réparation correcte et il convient de faire une régularisation afin que Grub note bien dans ses tablettes que son chargeur d'amorçage se trouve dans le MBR. Pour ce faire, je te prie de passer la commande suivante depuis une session de ton Ubuntu installé :
sudo debconf-show grub-pc
Merci pour votre réponse malbo , mais après le premier redémarrage j'ai rencontré un autre problème , LE WIFI , il ne fonctionne plus je sais pas pourquoi ! qu'est ce que je dois faire d’après vous ? merci
Hors ligne
#6 Le 29/10/2014, à 15:46
- malbo
Re : Comment accéder a Ubuntu Après Installation ! (Débutant) [RESOLU]
Merci pour votre réponse malbo , mais après le premier redémarrage j'ai rencontré un autre problème , LE WIFI , il ne fonctionne plus je sais pas pourquoi ! qu'est ce que je dois faire d’après vous ? merci
Tu te connectes en liaison filaire (au lieu de te connecter en WiFi) et tu demandes de l'aide dans le forum spécialisé "Configuration WiFi" : http://forum.ubuntu-fr.org/viewforum.php?id=82
Hors ligne