Ubuntu-fr

keewin

install catalyst 8.5 inspiron 6400 avec ATI X1300 [Resolut]

salut a tous

Bon j'ai un problème, et j'arrive pas a la résoudre.
ca fait une semaine que je tente l'installation des drivers propriétaires ATI pour ma mobility Readon X1300. j'ai tenté plusieurs solutions, envy (8.4)  dans un premier temps, mais ca n'a pas marché, et la méthode directe avec les driver telechargé sur le site (8.5).
Le problème c'est que a chaque fois a la fin de l'installation j'obtien

display: :1.0  screen: 0
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.2 (2.1 Mesa 7.0.3)

quand je fait

fglrxinfo

et je voulais savoir si vous aviez des solutions pour régler ce problème.

Merci, je tenterais de répondre le plus rapidement a vos questions .

Dernière modification par keewin (Le 11/06/2008, à 18:20)

keewin

Re : install catalyst 8.5 inspiron 6400 avec ATI X1300 [Resolut]

personne n'aurais la meme config que moi, histoire de m'aider un peut, ou une idée ???

merci

pierluc

Re : install catalyst 8.5 inspiron 6400 avec ATI X1300 [Resolut]

Si je ne me trompe pas dans Ubuntu il y a un paquet de modules noyau propriétaires qui se nomme "restricted modules" et qui fait tout bugger. Il y a une configuration a faire pour éviter le problème. Mais Envy est sencé s'en occuper.

---

Porte-Folio: http://pearluc.wordpress.com
Linux, là où la main de l'homme n'a jamait mit pied.
Capitaine Patnaud, Émission Dans une galaxie près de chez vous
Pour rire: www.tetesaclaques.tv

Lmartin76

Re : install catalyst 8.5 inspiron 6400 avec ATI X1300 [Resolut]

Bonjour,
1) Tu peux toujours regarder si le backlistage est fait dans les linux-restricted-modules :

sudo gedit /etc/default/linux-restricted-modules-common

Ajouter fglrx et nvidia :

DISABLED_MODULES="fglrx nvidia"

reboot du PC.

2) sinon reinstaller linux-restricted-modules (par synaptic par exemple)

reboot du pc

3) Essayer aussi ceci :

sudo gedit /etc/modprobe.d/blacklist-restricted

et commenter la ligne :

# This file is used to disable restricted drivers
#blacklist fglrx

reboot du PC.

4) si rien ne marche : se pendre

Dernière modification par Lmartin76 (Le 09/06/2008, à 16:26)

---

Planète bouillue, planète foutue.

keewin

Re : install catalyst 8.5 inspiron 6400 avec ATI X1300 [Resolut]

Bon, c'est pas que je n'ai pas trop envi de me pendre, mais ca ne marche pas. donc j'ai desinstaller les anciens drivers, et mi les dernier d' ATI avec la méthode décrite dans la documentation.
Je met la procédure d'installation, au cas ou quelqu'un voit quelque chose :

Created directory fglrx-install.lG7306
Verifying archive integrity... All good.
Uncompressing ATI Proprietary Linux Driver-8.493.1...........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
==================================================
 ATI Technologies Linux Driver Installer/Packager 
==================================================
Generating package: Ubuntu
Automatically detected hardy
Package /home/kevin/Documents/graphique/xorg-driver-fglrx_8.493.1-0ubuntu1_i386.deb has been successfully generated
Package /home/kevin/Documents/graphique/xorg-driver-fglrx-dev_8.493.1-0ubuntu1_i386.deb has been successfully generated
Package /home/kevin/Documents/graphique/fglrx-kernel-source_8.493.1-0ubuntu1_i386.deb has been successfully generated
Package /home/kevin/Documents/graphique/fglrx-amdcccle_8.493.1-0ubuntu1_i386.deb has been successfully generated
Removing temporary directory: fglrx-install.lG7306
kevin@kevin-laptop:~/Documents/graphique$ sudo dpkg -i xorg-driver-fglrx_8.*-0ubuntu1_i386.deb
Sélection du paquet xorg-driver-fglrx précédemment désélectionné.
(Lecture de la base de données... 133176 fichiers et répertoires déjà installés.)
Dépaquetage de xorg-driver-fglrx (à partir de xorg-driver-fglrx_8.493.1-0ubuntu1_i386.deb) ...
Paramétrage de xorg-driver-fglrx (2:8.493.1-0ubuntu1) ...
 * Starting atieventsd                                                   [ OK ] 

kevin@kevin-laptop:~/Documents/graphique$ sudo dpkg -i xorg-driver-fglrx-dev_8.*-0ubuntu1_i386.deb
Sélection du paquet xorg-driver-fglrx-dev précédemment désélectionné.
(Lecture de la base de données... 133268 fichiers et répertoires déjà installés.)
Dépaquetage de xorg-driver-fglrx-dev (à partir de xorg-driver-fglrx-dev_8.493.1-0ubuntu1_i386.deb) ...
Paramétrage de xorg-driver-fglrx-dev (2:8.493.1-0ubuntu1) ...
kevin@kevin-laptop:~/Documents/graphique$ sudo dpkg -i fglrx-kernel-source_8.*-0ubuntu1_i386.deb
Sélection du paquet fglrx-kernel-source précédemment désélectionné.
(Lecture de la base de données... 133278 fichiers et répertoires déjà installés.)
Dépaquetage de fglrx-kernel-source (à partir de fglrx-kernel-source_8.493.1-0ubuntu1_i386.deb) ...
Paramétrage de fglrx-kernel-source (2:8.493.1-0ubuntu1) ...
Adding Module to DKMS build system
Doing initial module build
Installing initial module
Done.

kevin@kevin-laptop:~/Documents/graphique$ sudo dpkg -i fglrx-amdcccle_8.*-0ubuntu1_i386.deb
Sélection du paquet fglrx-amdcccle précédemment désélectionné.
(Lecture de la base de données... 133295 fichiers et répertoires déjà installés.)
Dépaquetage de fglrx-amdcccle (à partir de fglrx-amdcccle_8.493.1-0ubuntu1_i386.deb) ...
Paramétrage de fglrx-amdcccle (2:8.493.1-0ubuntu1) ...

kevin@kevin-laptop:~/Documents/graphique$ sudo aticonfig --initial -f
Uninitialised file found, configuring.
Using /etc/X11/xorg.conf
Saved back-up to /etc/X11/xorg.conf.original-0
kevin@kevin-laptop:~/Documents/graphique$

En fait je pense qu'il y a un problème à la fin de la phase d'installation, quand il faut faire la commande aticonfig -- initial -f, car quand je tente d'ouvrir catalyst center, j'ai un message me disant qu'il y a un problème d'initialisation dans l'edition Catalyst Contrlo Center linux, et qu'il peut etre du soit au fait qu'il n'y a aucun pilot installé, ou le mauvais, soit que je n'ai pas fait l'initialisation.

Voila

pierluc

Re : install catalyst 8.5 inspiron 6400 avec ATI X1300 [Resolut]

Bien il faut que tu redémarre le serveur graphique pour que ça marche. Aussis bien redémarrer toute la machine pour être certain que le pilote se charge. Ça se peut que ça plante. Dans mon cas ça plante tout le temps la premièere foie aprèes une mise à jour du pilote, du noyau ou du serveur graphique. Alors, je redémarre à nouveau et là ça marche.

Note:

Quand je fait une mise à jour du noyau le système plante et ne charge pas le serveur graphique. Résultat, écran noir avec un curseur qui clignote et une inscription "login".

Quand je fais une mise à jour du serveur graphique ou du pilote ATI il me dit que mon xorg.conf marche pas.

Dans tout les cas je ne fait rien d'autre que redémarrer pour que ça fonctionne.

Conseil: n'éditez pas vôtre xorg.conf. Quand ça marchait avant, c'est sencé marcher après. Si ça marche pas c'est pas nessaisairement xorg.conf qui foire même si c'est ce que ubuntu nous dit. Je vous dit ça par expérience parce que chez moi ces messages sont tout le temp bidon. Si j'édite quelque chose ça me cré plus de problèmes mais si je "reset" tout vas bien.

---

Porte-Folio: http://pearluc.wordpress.com
Linux, là où la main de l'homme n'a jamait mit pied.
Capitaine Patnaud, Émission Dans une galaxie près de chez vous
Pour rire: www.tetesaclaques.tv

Lmartin76

Re : install catalyst 8.5 inspiron 6400 avec ATI X1300 [Resolut]

Dans ton cas, le pilote ati ne se charge pas. C'est tjs le pilote libre radeon qui est utilisé (fglrxinfo te le confirmera).

En fait, Hardy intègre la dernière version de Xorg qui est sensée gérer dynamiquement le serveur X. Donc avant la 8.04, il suffisait de mettre en dur dans la section device de la Cg du fichier Xorg.conf, le driver qui allait bien ("fglrx" ou "ati" ) et ça roulait. Maintenant, si tu regardes ton Xorg.conf, y'a plus rien, donc tu n'as plus la main. Par contre j'ai vu qu'il est possible de paramétrer manuellement Xorg en forçant les infos dans le fichier de conf (comme dans la version antérieure de Xorg), mais ce n'est peut être pas la bonne solution.
Je verrais lorsque je migrerais vers la 8.04.

Eventuellement, recherche dans la log si ça gueule au démarrage.

grep WW /var/log/Xorg.0.log
grep EE /var/log/Xorg.0.log

---

Planète bouillue, planète foutue.

keewin

Re : install catalyst 8.5 inspiron 6400 avec ATI X1300 [Resolut]

effectivement ca cri un peut :

(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(WW) fglrx(0): Only one display is connnected,so single mode is enabled
(WW) fglrx(0): Option "VendorName" is not used
(WW) fglrx(0): Option "ModelName" is not used
(WW) AIGLX: 3D driver claims to not support visual 0x23

et

(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(II) Loading extension MIT-SCREEN-SAVER

Par contre je n'ai aucune idée de ce que ca veut dire tout ca, si quelqu'un peut m'éclairer.

merci

yourgen

Re : install catalyst 8.5 inspiron 6400 avec ATI X1300 [Resolut]

restricted-manager est maintenant remplacé par Jockey ( jockey-kde  & jockey-gtk )

Ça devrait être plus simple. A essayer.

Lmartin76

Re : install catalyst 8.5 inspiron 6400 avec ATI X1300 [Resolut]

Non, y'a rien de spécial. Les warning c'est pas genant. Bon, si trouve quelque chose de nouveau, je reviens par là.

---

Planète bouillue, planète foutue.

keewin

Re : install catalyst 8.5 inspiron 6400 avec ATI X1300 [Resolut]

jockey est deja installé. Ca m'nerve un peut que ca marche pas, je vais demander a ceux qui on le meme portable que moi si ils on réussit.
je reposterais ici si j'ai de nouveau éléments

Lmartin76

Re : install catalyst 8.5 inspiron 6400 avec ATI X1300 [Resolut]

A tout hasard, que renvoie

lspci

et

sudo gedit /etc/modules

Dernière modification par Lmartin76 (Le 10/06/2008, à 14:32)

---

Planète bouillue, planète foutue.

keewin

Re : install catalyst 8.5 inspiron 6400 avec ATI X1300 [Resolut]

alorsn pour lspci

lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 01)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 01)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
01:00.0 VGA compatible controller: ATI Technologies Inc M52 [Mobility Radeon X1300]
03:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller
03:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19)
03:01.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 0a)
03:01.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 05)
03:01.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev ff)
0b:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
kevin@kevin-laptop:~$

et pour l'autre :

# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.

fglrx
fuse
lp
sbp2

# Generated by sensors-detect on Mon May 26 22:32:15 2008
# Chip drivers
coretemp
fglrx

si ca peut aider

Lmartin76

Re : install catalyst 8.5 inspiron 6400 avec ATI X1300 [Resolut]

Ba non, ta carte est bien reconnue et fglrx est en principe chargé au démarrage (par contre je ne sais pas si c'est normal que le module figure 2 fois dans la liste). Regarde si ça gueule pas au chargement des modules. Juste après le boot, passe la commande

dmesg

.

---

Planète bouillue, planète foutue.

keewin

Re : install catalyst 8.5 inspiron 6400 avec ATI X1300 [Resolut]

Bon il y a pas mal de chose, je n'ai fait aucun tris :

found.
[    6.474625] CPU0: Intel(R) Core(TM)2 CPU         T5500  @ 1.66GHz stepping 06
[    6.474642] SMP alternatives: switching to SMP code
[    6.475375] Booting processor 1/1 eip 3000
[    8.527833] Initializing CPU#1
[    8.606435] Calibrating delay using timer specific routine.. 3325.07 BogoMIPS (lpj=6650143)
[    8.606442] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 00000000
[    8.606448] monitor/mwait feature present.
[    8.606451] CPU: L1 I cache: 32K, L1 D cache: 32K
[    8.606452] CPU: L2 cache: 2048K
[    8.606454] CPU: Physical Processor ID: 0
[    8.606456] CPU: Processor Core ID: 1
[    8.606457] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001 00000000
[    6.566579] CPU1: Intel(R) Core(TM)2 CPU         T5500  @ 1.66GHz stepping 06
[    6.566602] Total of 2 processors activated (6653.85 BogoMIPS).
[    6.566800] ENABLING IO-APIC IRQs
[    6.566991] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[    6.713883] checking TSC synchronization [CPU#0 -> CPU#1]:
[    6.733860] Measured 3397414630 cycles TSC warp between CPUs, turning off TSC clock.
[    6.733862] Marking TSC unstable due to: check_tsc_sync_source failed.
[    6.733876] Brought up 2 CPUs
[    6.733900] CPU0 attaching sched-domain:
[    6.733903]  domain 0: span 03
[    6.733904]   groups: 01 02
[    6.733907] CPU1 attaching sched-domain:
[    6.733909]  domain 0: span 03
[    6.733911]   groups: 02 01
[    8.774597] net_namespace: 64 bytes
[    8.774608] Booting paravirtualized kernel on bare hardware
[    8.775078] Time: 17:07:16  Date: 06/11/08
[    8.775105] NET: Registered protocol family 16
[    8.775320] EISA bus registered
[    8.775324] ACPI: bus type pci registered
[    8.804025] PCI: PCI BIOS revision 2.10 entry at 0xfb336, last bus=13
[    8.804027] PCI: Using configuration type 1
[    8.804043] Setting up standard PCI resources
[    6.769275] ACPI: EC: Look up EC in DSDT
[    6.774092] ACPI: Interpreter enabled
[    6.774096] ACPI: (supports S0 S3 S4 S5)
[    6.774109] ACPI: Using IOAPIC for interrupt routing
[    6.788036] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    6.788808] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[    6.788813] PCI quirk: region 1080-10bf claimed by ICH6 GPIO
[    6.790128] PCI: Transparent bridge - 0000:00:1e.0
[    6.790169] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    6.790568] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[    6.790662] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[    6.790786] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    6.790901] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[    6.798509] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *4
[    6.798619] ACPI: PCI Interrupt Link [LNKB] (IRQs *5 7)
[    6.798724] ACPI: PCI Interrupt Link [LNKC] (IRQs *9 10 11)
[    6.798829] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *3
[    6.798935] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[    6.799043] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    6.799151] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[    6.799258] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
[    6.799413] Linux Plug and Play Support v0.97 (c) Adam Belay
[    6.799446] pnp: PnP ACPI init
[    6.799454] ACPI: bus type pnp registered
[    6.815674] pnpacpi: exceeded the max number of mem resources: 12
[    6.828250] pnp: PnP ACPI: found 12 devices
[    6.828253] ACPI: ACPI bus type pnp unregistered
[    6.828257] PnPBIOS: Disabled by ACPI PNP
[    8.868945] PCI: Using ACPI for IRQ routing
[    8.868948] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[    8.934069] NET: Registered protocol family 8
[    8.934071] NET: Registered protocol family 20
[    8.934108] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    8.934112] hpet0: 3 64-bit timers, 14318180 Hz
[    8.935145] AppArmor: AppArmor Filesystem Enabled
[    6.897495] Time: hpet clocksource has been installed.
[    6.897513] Switched to high resolution mode on CPU 0
[    8.938062] Switched to high resolution mode on CPU 1
[    6.910481] system 00:00: iomem range 0x0-0x9fbff could not be reserved
[    6.910484] system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved
[    6.910487] system 00:00: iomem range 0xc0000-0xcffff could not be reserved
[    6.910490] system 00:00: iomem range 0xe0000-0xfffff could not be reserved
[    6.910493] system 00:00: iomem range 0x100000-0x3fed33ff could not be reserved
[    6.910495] system 00:00: iomem range 0x3fed3400-0x3fefffff could not be reserved
[    6.910498] system 00:00: iomem range 0x3ff00000-0x3fffffff could not be reserved
[    6.910501] system 00:00: iomem range 0xffb00000-0xffffffff could not be reserved
[    6.910504] system 00:00: iomem range 0xfec00000-0xfec0ffff could not be reserved
[    6.910507] system 00:00: iomem range 0xfee00000-0xfee0ffff could not be reserved
[    6.910510] system 00:00: iomem range 0xfed20000-0xfed9ffff could not be reserved
[    6.910513] system 00:00: iomem range 0xffa80000-0xffa83fff could not be reserved
[    6.910520] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[    6.910523] system 00:02: ioport range 0x1000-0x1005 has been reserved
[    6.910525] system 00:02: ioport range 0x1008-0x100f has been reserved
[    6.910531] system 00:03: ioport range 0xf400-0xf4fe has been reserved
[    6.910534] system 00:03: ioport range 0x1006-0x1007 has been reserved
[    6.910537] system 00:03: ioport range 0x100a-0x1059 could not be reserved
[    6.910540] system 00:03: ioport range 0x1060-0x107f has been reserved
[    6.910542] system 00:03: ioport range 0x1080-0x10bf has been reserved
[    6.910545] system 00:03: ioport range 0x10c0-0x10df has been reserved
[    6.910547] system 00:03: ioport range 0x1010-0x102f has been reserved
[    6.910550] system 00:03: ioport range 0x809-0x809 has been reserved
[    6.910558] system 00:08: ioport range 0xc80-0xcff could not be reserved
[    6.910561] system 00:08: ioport range 0x910-0x91f has been reserved
[    6.910564] system 00:08: ioport range 0x920-0x92f has been reserved
[    6.910566] system 00:08: ioport range 0xcb0-0xcbf has been reserved
[    6.910569] system 00:08: ioport range 0x930-0x97f has been reserved
[    6.910576] system 00:0b: iomem range 0xfed00000-0xfed003ff has been reserved
[    6.941003] PCI: Bridge: 0000:00:01.0
[    6.941006]   IO window: e000-efff
[    6.941010]   MEM window: efd00000-efefffff
[    6.941013]   PREFETCH window: d0000000-dfffffff
[    6.941017] PCI: Bridge: 0000:00:1c.0
[    6.941018]   IO window: disabled.
[    6.941024]   MEM window: efc00000-efcfffff
[    6.941028]   PREFETCH window: disabled.
[    6.941034] PCI: Bridge: 0000:00:1c.3
[    6.941037]   IO window: d000-dfff
[    6.941043]   MEM window: efa00000-efbfffff
[    6.941048]   PREFETCH window: e0000000-e01fffff
[    6.941054] PCI: Bridge: 0000:00:1e.0
[    6.941055]   IO window: disabled.
[    6.941061]   MEM window: ef900000-ef9fffff
[    6.941066]   PREFETCH window: disabled.
[    6.941084] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[    6.941089] PCI: Setting latency timer of device 0000:00:01.0 to 64
[    6.941113] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[    6.941119] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[    6.941144] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 17
[    6.941150] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[    6.941165] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[    6.941176] NET: Registered protocol family 2
[    6.985377] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    6.985595] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    6.986046] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    6.986272] TCP: Hash tables configured (established 131072 bind 65536)
[    6.986274] TCP reno registered
[    6.997440] checking if image is initramfs... it is
[    7.674088] Freeing initrd memory: 7308k freed
[    7.674256] Simple Boot Flag at 0x79 set to 0x1
[    9.715429] audit: initializing netlink socket (disabled)
[    9.715443] audit(1213204036.520:1): initialized
[    7.675201] highmem bounce pool size: 64 pages
[    9.717866] VFS: Disk quotas dquot_6.5.1
[    7.677513] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    7.677652] io scheduler noop registered
[    7.677654] io scheduler anticipatory registered
[    7.677656] io scheduler deadline registered
[    7.677670] io scheduler cfq registered (default)
[    7.677781] Boot video device is 0000:01:00.0
[    7.677898] PCI: Setting latency timer of device 0000:00:01.0 to 64
[    7.677937] assign_interrupt_mode Found MSI capability
[    7.677970] Allocate Port Service[0000:00:01.0:pcie00]
[    7.678059] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[    7.678120] assign_interrupt_mode Found MSI capability
[    7.678168] Allocate Port Service[0000:00:1c.0:pcie00]
[    7.678207] Allocate Port Service[0000:00:1c.0:pcie02]
[    7.678316] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[    7.678376] assign_interrupt_mode Found MSI capability
[    7.678424] Allocate Port Service[0000:00:1c.3:pcie00]
[    7.678460] Allocate Port Service[0000:00:1c.3:pcie02]
[    7.678746] isapnp: Scanning for PnP cards...
[    8.033140] isapnp: No Plug & Play device found
[   10.101193] Real Time Clock Driver v1.12ac
[   10.101351] hpet_resources: 0xfed00000 is busy
[   10.101404] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   10.102676] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   10.102748] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[   10.102854] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    8.065260] serio: i8042 KBD port at 0x60,0x64 irq 1
[    8.065266] serio: i8042 AUX port at 0x60,0x64 irq 12
[   10.128183] mice: PS/2 mouse device common for all mice
[   10.128310] EISA: Probing bus 0 at eisa.0
[   10.128318] Cannot allocate resource for EISA slot 1
[   10.128350] EISA: Detected 0 cards.
[   10.128353] cpuidle: using governor ladder
[   10.128355] cpuidle: using governor menu
[   10.128438] NET: Registered protocol family 1
[   10.128468] Using IPI No-Shortcut mode
[   10.128498] registered taskstats version 1
[   10.128609]   Magic number: 12:692:137
[   10.128688] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   10.128690] EDD information not available.
[   10.128874] Freeing unused kernel memory: 368k freed
[   10.131109] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    9.304120] fuse init (API version 7.9)
[    9.326235] ACPI: SSDT 3FED4176, 0202 (r1  PmRef  Cpu0Ist     3000 INTL 20050624)
[    9.326427] ACPI: SSDT 3FED3F2B, 01C6 (r1  PmRef  Cpu0Cst     3001 INTL 20050624)
[    9.327009] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[    9.327014] ACPI: Processor [CPU0] (supports 8 throttling states)
[    9.327229] ACPI: SSDT 3FED4378, 00C4 (r1  PmRef  Cpu1Ist     3000 INTL 20050624)
[    9.327404] ACPI: SSDT 3FED40F1, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20050624)
[   11.368520] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[   11.368526] ACPI: Processor [CPU1] (supports 8 throttling states)
[   11.373748] ACPI: Thermal Zone [THM] (58 C)
[    9.710874] usbcore: registered new interface driver usbfs
[    9.710905] usbcore: registered new interface driver hub
[    9.717320] usbcore: registered new device driver usb
[    9.722249] USB Universal Host Controller Interface driver v3.0
[    9.722315] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 18
[    9.722332] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[    9.722337] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    9.722613] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    9.722647] uhci_hcd 0000:00:1d.0: irq 18, io base 0x0000bf80
[    9.722799] usb usb1: configuration #1 chosen from 1 choice
[    9.722823] hub 1-0:1.0: USB hub found
[    9.722828] hub 1-0:1.0: 2 ports detected
[    9.825550] SCSI subsystem initialized
[   11.873112] ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 21 (level, low) -> IRQ 19
[   11.873124] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[   11.873129] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   11.873153] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[   11.873187] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000bf60
[   11.873306] usb usb2: configuration #1 chosen from 1 choice
[   11.873330] hub 2-0:1.0: USB hub found
[   11.873336] hub 2-0:1.0: 2 ports detected
[    9.851771] libata version 3.00 loaded.
[   11.974228] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 20
[   11.974241] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[   11.974246] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   11.974270] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[   11.974303] uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000bf40
[   11.974423] usb usb3: configuration #1 chosen from 1 choice
[   11.974448] hub 3-0:1.0: USB hub found
[   11.974452] hub 3-0:1.0: 2 ports detected
[   12.078078] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 21
[   12.078090] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[   12.078095] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[   12.078124] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[   12.078156] uhci_hcd 0000:00:1d.3: irq 21, io base 0x0000bf20
[   12.078282] usb usb4: configuration #1 chosen from 1 choice
[   12.078308] hub 4-0:1.0: USB hub found
[   12.078313] hub 4-0:1.0: 2 ports detected
[   12.109927] usb 1-1: new low speed USB device using uhci_hcd and address 2
[   12.182042] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 18
[   12.182058] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[   12.182062] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[   12.182088] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[   12.186005] ehci_hcd 0000:00:1d.7: debug port 1
[   12.186012] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[   12.186018] ehci_hcd 0000:00:1d.7: irq 18, io mem 0xffa80000
[   12.237721] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   12.237845] usb usb5: configuration #1 chosen from 1 choice
[   12.237870] hub 5-0:1.0: USB hub found
[   12.237877] hub 5-0:1.0: 8 ports detected
[   12.341957] ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 17
[   12.394617] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17]  MMIO=[ef9fd800-ef9fdfff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[   12.408470] ata_piix 0000:00:1f.2: version 2.12
[   12.408478] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[   12.408514] ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 17 (level, low) -> IRQ 22
[   12.408552] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[   12.412807] scsi0 : ata_piix
[   12.413390] scsi1 : ata_piix
[   12.414168] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14
[   12.414171] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15
[   10.536333] ata1.00: ATA-7: Hitachi HTS541680J9SA00, SB2OC74P, max UDMA/100
[   10.536338] ata1.00: 156301488 sectors, multi 8: LBA48 NCQ (depth 0/32)
[   10.552313] ata1.00: configured for UDMA/100
[   10.599652] usb 1-1: device not accepting address 2, error -71
[   12.928152] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-L632D, DE04, max UDMA/33
[   13.115769] ata2.00: configured for UDMA/33
[   11.075511] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54168 SB2O PQ: 0 ANSI: 5
[   11.085189] scsi 1:0:0:0: CD-ROM            TSSTcorp DVD+-RW TS-L632D DE04 PQ: 0 ANSI: 5
[   13.125908] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 22
[   13.144308] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243)
[   13.144317] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243)
[   13.144324] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243)
[   13.187280] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0
[   13.187323] b44.c:v2.0
[   13.208530] eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:15:c5:c3:3e:b9
[   11.179166] Driver 'sd' needs updating - please use bus_type methods
[   11.179250] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[   11.179263] sd 0:0:0:0: [sda] Write Protect is off
[   11.179266] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   11.179282] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   11.179329] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[   11.179339] sd 0:0:0:0: [sda] Write Protect is off
[   11.179342] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   11.179358] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   11.179361]  sda:<4>Driver 'sr' needs updating - please use bus_type methods
[   11.202497]  sda1 sda2 sda3 < sda5 sda6 > sda4
[   11.223175] sd 0:0:0:0: [sda] Attached SCSI disk
[   11.227659] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   11.227681] sr 1:0:0:0: Attached scsi generic sg1 type 5
[   11.287837] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[   11.287841] Uniform CD-ROM driver Revision: 3.20
[   11.287896] sr 1:0:0:0: Attached scsi CD-ROM sr0
[   11.578106] usb 5-7: new high speed USB device using ehci_hcd and address 4
[   13.671416] Attempting manual resume
[   13.671420] swsusp: Resume From Partition 8:5
[   13.671421] PM: Checking swsusp image.
[   13.671753] PM: Resume from disk failed.
[   13.675547] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[464fc000259ccc50]
[   13.718174] kjournald starting.  Commit interval 5 seconds
[   11.677746] EXT3-fs: mounted filesystem with ordered data mode.
[   11.708479] usb 5-7: configuration #1 chosen from 1 choice
[   13.985963] usb 1-1: new low speed USB device using uhci_hcd and address 4
[   12.113152] usb 1-1: configuration #1 chosen from 1 choice
[   14.394310] usb 3-1: new full speed USB device using uhci_hcd and address 2
[   12.561033] usb 3-1: configuration #1 chosen from 1 choice
[   17.726181] ip_tables: (C) 2000-2006 Netfilter Core Team
[   17.750313] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   18.396991] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   18.432372] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   18.479366] Linux agpgart interface v0.102
[   18.662715] ACPI: AC Adapter [AC] (on-line)
[   20.811640] input: Lid Switch as /devices/virtual/input/input2
[   20.812066] ACPI: Lid Switch [LID]
[   20.812144] input: Power Button (CM) as /devices/virtual/input/input3
[   20.828094] ACPI: Power Button (CM) [PBTN]
[   20.828187] input: Sleep Button (CM) as /devices/virtual/input/input4
[   20.844070] ACPI: Sleep Button (CM) [SBTN]
[   21.084907] ACPI: Battery Slot [BAT0] (battery present)
[   21.294523] ACPI: WMI-Acer: Mapper loaded
[   19.378160] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:21/LNXVIDEO:00/input/input5
[   19.409664] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[   19.417478] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:01/input/input6
[   19.441628] ACPI: Video Device [VID1] (multi-head: yes  rom: no  post: no)
[   19.441801] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:02/input/input7
[   19.473583] ACPI: Video Device [VID2] (multi-head: yes  rom: no  post: no)
[   19.727101] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.25
[   19.727105] iwl3945: Copyright(c) 2003-2007 Intel Corporation
[   19.727251] ACPI: PCI Interrupt 0000:0b:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[   19.727267] PCI: Setting latency timer of device 0000:0b:00.0 to 64
[   19.727288] iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[   19.818580] wmaster0: Selected rate control algorithm 'iwl-3945-rs'
[   19.854913] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[   19.908912] [fglrx] Adapter chains initialized successfully!
[   19.908919] [fglrx] CF object manager initialized successfully!
[   19.908951] [fglrx]   vendor: 1002 device: 7149 count: 1
[   19.909007] [fglrx] Maximum main memory to use for locked dma buffers: 927 MBytes.
[   19.909041] [fglrx] ASYNCIO init succeed!
[   19.910108] [fglrx] PAT is enabled successfully!
[   19.910132] [fglrx] module loaded - fglrx 8.49.7 [May 12 2008] with 1 minors
[   20.010877] Linux video capture interface: v2.00
[   20.222466] usbcore: registered new interface driver libusual
[   20.239270] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found.(ZC3XX) 
[   20.462112] iTCO_vendor_support: vendor-support=0
[   20.481824] Initializing USB Mass Storage driver...
[   20.544700] scsi2 : SCSI emulation for USB Mass Storage devices
[   20.545259] input: PC Speaker as /devices/platform/pcspkr/input/input8
[   20.549700] usb-storage: device found at 4
[   20.549703] usb-storage: waiting for device to settle before scanning
[   20.605595] ACPI: PCI interrupt for device 0000:0b:00.0 disabled
[   20.606485] sdhci: Secure Digital Host Controller Interface driver
[   20.606488] sdhci: Copyright(c) Pierre Ossman
[   20.606521] sdhci: SDHCI controller found at 0000:03:01.1 [1180:0822] (rev 19)
[   20.606544] ACPI: PCI Interrupt 0000:03:01.1[b] -> GSI 18 (level, low) -> IRQ 23
[   20.606622] mmc0: SDHCI at 0xef9fd500 irq 23 DMA
[   20.613530] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[   20.613628] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
[   20.613667] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   20.678506] intel_rng: FWH not detected
[   22.854097] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 19
[   22.854123] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[   20.909254] usbcore: registered new interface driver hiddev
[   22.949713] usbcore: registered new interface driver gspca
[   22.949718] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: gspca driver 01.00.20 registered
[   20.921812] input: PS/2+USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/input/input9
[   20.933403] usbcore: registered new interface driver snd-usb-audio
[   20.949722] usbcore: registered new interface driver usb-storage
[   20.949728] USB Mass Storage support registered.
[   20.971277] input,hidraw0: USB HID v1.11 Mouse [PS/2+USB Mouse] on usb-0000:00:1d.0-1
[   20.971298] usbcore: registered new interface driver usbhid
[   20.971302] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   21.269424] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x180b1, caps: 0xa04713/0x200000
[   23.345848] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10
[   21.362234] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[   21.980079] lp: driver loaded but no devices found
[   22.157539] Adding 1044216k swap on /dev/sda5.  Priority:-1 extents:1 across:1044216k
[   22.694154] EXT3 FS on sda4, internal journal
[   25.602426] kjournald starting.  Commit interval 5 seconds
[   23.562243] EXT3 FS on sda6, internal journal
[   23.562251] EXT3-fs: mounted filesystem with ordered data mode.
[   25.288546] No dock devices found.
[   27.584582] usb-storage: device scan complete
[   27.585066] scsi 2:0:0:0: Direct-Access     DMI      External         1.05 PQ: 0 ANSI: 0
[   27.598533] sd 2:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
[   27.599391] sd 2:0:0:0: [sdb] Write Protect is off
[   27.599394] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
[   27.599396] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[   27.600525] sd 2:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
[   27.601399] sd 2:0:0:0: [sdb] Write Protect is off
[   27.601401] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
[   27.601403] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[   27.601406]  sdb:<6>apm: BIOS not found.
[   32.949343] ACPI: PCI Interrupt 0000:0b:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[   32.949479] PM: Writing back config space on device 0000:0b:00.0 at offset 1 (was 100102, writing 100106)
[   31.007101] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
[   31.011638] Registered led device: iwl-phy0:RX
[   31.011658] Registered led device: iwl-phy0:TX
[   35.132799]  sdb1 sdb2 < > sdb3
[   35.144846] sd 2:0:0:0: [sdb] Attached SCSI disk
[   35.144931] sd 2:0:0:0: Attached scsi generic sg2 type 0
[   35.361341] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[   35.338943] [fglrx] Reserved FB block: Shared offset:0, size:0 
[   35.338949] [fglrx] Reserved FB block: Unshared offset:3fbb000, size:0 
[   35.338951] [fglrx] Reserved FB block: Unshared offset:3ffb000, size:0 
[   56.586824] NET: Registered protocol family 10
[   56.587147] lo: Disabled Privacy Extensions
[   56.588591] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   56.589164] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   66.476245] CPU0 attaching NULL sched-domain.
[   66.476254] CPU1 attaching NULL sched-domain.
[   66.495101] CPU0 attaching sched-domain:
[   66.495107]  domain 0: span 03
[   66.495109]   groups: 01 02
[   66.495112] CPU1 attaching sched-domain:
[   66.495114]  domain 0: span 03
[   66.495116]   groups: 02 01
[   73.664545] NET: Registered protocol family 17
[   78.486703] wlan0: Initial auth_alg=0
[   78.486709] wlan0: authenticate with AP 00:0f:3d:fc:c1:50
[   76.447927] wlan0: RX authentication from 00:0f:3d:fc:c1:50 (alg=0 transaction=2 status=0)
[   76.447932] wlan0: authenticated
[   76.447934] wlan0: associate with AP 00:0f:3d:fc:c1:50
[   76.462589] wlan0: RX AssocResp from 00:0f:3d:fc:c1:50 (capab=0x471 status=0 aid=1)
[   76.462593] wlan0: associated
[   76.464977] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   92.969047] wlan0: no IPv6 routers present
[   93.928647] gnome-video-thu[6833]: segfault at b5618000 eip b677b1e5 esp b4db0e50 error 7

ca parle plusieurs fois fglrx, mais ca n'a pas l'air inquiétant.

keewin

Re : install catalyst 8.5 inspiron 6400 avec ATI X1300 [Resolut]

Merci a tous de votre aide, j'ai enfin réussi a activer l'accéleration 3D, et merci google.
Pour résumer j'ai fini aprés moultes recherches, à trouver mes info, désepérant de trouver une solution sur le web francais je susi aller sur le site ubuntu anglais.
En fait si j'ai bien comprit il y avait un confli entre Mesa xserver-xgl et les drivers proprio, Mesa été activé mais pas fglrx.

Pour ceux que ca intéressent, voila la page en question :

http://wiki.cchtml.com/index.php/Ubuntu … tion_Guide

et

http://wiki.cchtml.com/index.php/Ubuntu … sa_drivers

il faudrait le rajouter dans la doc sur les pilotes ATI, je le ferais si personne ne vas le faire

pierluc

Re : install catalyst 8.5 inspiron 6400 avec ATI X1300 [Resolut]

Oublie pas de le faire dans catalyst et dans ati.run mais dans Catalyst mais pas de trucs qui n'ont pas de lien avec les pilote ATI catalyst.

ati.run c'est déjà assez mêlé avec toutes les affaires relatives à des vieilles versions du pilote ATI datent de l'époque où ils vallait rien et où il portain un non de fou ati proprietary...

---

Porte-Folio: http://pearluc.wordpress.com
Linux, là où la main de l'homme n'a jamait mit pied.
Capitaine Patnaud, Émission Dans une galaxie près de chez vous
Pour rire: www.tetesaclaques.tv

Lmartin76

Re : install catalyst 8.5 inspiron 6400 avec ATI X1300 [Resolut]

Bonjour,
Je déterre ce topic pour ajouter quelques précisions. Je suis passé sur Hardy récemment et j'ai rencontré le même pb, à savoir écran blanc magnifique après installation des derniers drivers ATI 8.07. Le dernier post de Keewin m'a bien aidé pour résoudre cela :

1) backlister le module fglrx provenant des dépots ubuntu (celui qui est géré par le gestionnaire de driver propriétaire)
Editer le fichier :

sudo gedit /etc/default/linux-restricted-modules-common

puis ajouter :

DISABLED_MODULES="fglrx"

2) Dé-backlister le même module dans les 2 fichiers suivants en les éditant:

sudo gedit /etc/modprobe.d/blacklist-restricted
ET
sudo gedit /etc/modprobe.d/blacklist-local

Il suffit de commenter la ligne ou simplement de la virer.

Redémarrage et c'est ok.

Dernière modification par Lmartin76 (Le 20/08/2008, à 10:01)

---

Planète bouillue, planète foutue.