#1 Le 01/12/2014, à 20:16
- dof51
capture video magnétoscope carte tv bt 878
bonjour,
sous ubuntu 14.04 lts je voudrais réencoder des cassettes vidéos en xvid.à partir d'un magnétoscope connecté à ma carte wintv express.
Mais il me semble que ma carte n'est pas détectée.
Ou trouver les pilotes compatibles pour ma carte ?
peut-on installer ktv dans ma version d'ubuntu ?
y a t'il d'autres moyens ?
J'ai parcouru le forum et vu que ma carte était nativement reconnue dans des versions antérieures d'ubuntu .
merci à l'avance de m'éclairer
Hors ligne
#2 Le 01/12/2014, à 21:32
- lann
Re : capture video magnétoscope carte tv bt 878
Quelle est la marque de ta carte :
lspci
lsusb
Hors ligne
#3 Le 02/12/2014, à 00:27
- dof51
Re : capture video magnétoscope carte tv bt 878
il s'agit d'une carte pci hauppauge wintv express
Hors ligne
#4 Le 02/12/2014, à 11:28
- dof51
Re : capture video magnétoscope carte tv bt 878
étant novice en ligne de commande je me suis lancé en tapant lspci et j'ai repére 2 lignes qui semblent indiquer que ma carte est bien reconnue:
02:01.0 multimedia video controler :Brooktree corporation BT 878 video capture (rev 11)
02:01.1 multimedia controler :Brooktree Corporation BT 878 audio capture ( rev 11 )
Hors ligne
#5 Le 02/12/2014, à 18:51
- lann
Re : capture video magnétoscope carte tv bt 878
Tu peux donner le retour de
lsmod
Autrement si tu n'as pas de soucis avec l'anglais, tout y est expliqué : http://www.tldp.org/HOWTO/BTTV/index.html
Dernière modification par lann (Le 02/12/2014, à 18:55)
Hors ligne
#6 Le 02/12/2014, à 19:05
- dof51
Re : capture video magnétoscope carte tv bt 878
snd_ac97_codec 130285 1 snd_atiixp
ac97_bus 12730 1 snd_ac97_codec
tvaudio 29387 0
msp3400 36179 0
snd_seq 61560 2 snd_seq_midi_event,snd_seq_midi
snd_pcm 102099 3 snd_ac97_codec,snd_bt87x,snd_atiixp
bttv 139212 0
snd_page_alloc 18710 3 snd_bt87x,snd_pcm,snd_atiixp
snd_seq_device 14497 3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer 29482 2 snd_pcm,snd_seq
btcx_risc 13640 1 bttv
tveeprom 21216 1 bttv
videobuf_dma_sg 19262 1 bttv
snd 69322 15 snd_ac97_codec,snd_bt87x,snd_timer,snd_pcm,snd_seq,snd_rawmidi,snd_seq_device,snd_atiixp,snd_seq_midi
rc_core 28124 1 bttv
radeon 1522640 3
v4l2_common 15681 5 bttv,tuner,tda7432,msp3400,tvaudio
videobuf_core 26023 2 bttv,videobuf_dma_sg
videodev 134688 6 bttv,tuner,tda7432,msp3400,tvaudio,v4l2_common
soundcore 12680 1 snd
i2c_piix4 22155 0
ttm 85150 1 radeon
drm_kms_helper 55071 1 radeon
drm 303102 5 ttm,drm_kms_helper,radeon
i2c_algo_bit 13413 2 bttv,radeon
shpchp 37032 0
parport_pc 32701 1
mac_hid 13205 0
ppdev 17671 0
lp 17759 0
parport 42348 3 lp,ppdev,parport_pc
hid_generic 12548 0
usbhid 52659 0
hid 106148 2 hid_generic,usbhid
usb_storage 62209 1
firewire_ohci 40409 0
8139too 33544 0
firewire_core 68769 1 firewire_ohci
crc_itu_t 12707 1 firewire_core
8139cp 27953 0
pata_acpi 13038 0
mii 13934 2 8139cp,8139too
pata_atiixp 13271 0
floppy 69418 0
sata_sil 13512 4
bernard@bernard-IMEDIA-6476:~$
Hors ligne
#7 Le 02/12/2014, à 21:21
- lann
Re : capture video magnétoscope carte tv bt 878
Ton module bttv est bien lancé. Donc ta carte est reconnue et prête à servir.
Pourquoi dis-tu que ta carte n'est pas reconnue ?
Tu utilises quoi comme logiciel ?
Pourquoi utiliser ktv qui est, semble-t-il, exclusivement pour Windows ?
Il en existe une multitude sur Linux : https://doc.ubuntu-fr.org/carte_tv
Hors ligne
#8 Le 02/12/2014, à 23:58
- dof51
Re : capture video magnétoscope carte tv bt 878
pourquoi je pensais que ma carte n'était pas reconnue : actuellement sous windows c'est ktv qui la gère et à chaque démarrage du pc windows me demande de l'installer (je n'ai pas installé les pilotes propriétaires).je pensais à tort qu'ubuntu ferait comme windows. :comme il ne demandait rien c'est qu'il ne l'avait pas détectée.
pourquoi ktv :parce que je le connais.j'ai réussi des captures à partir d'un magnétoscope et à les sortir en xvid.Seul problème mon pc rame pendant la capture''processeur amd 3400 à 2.2 ghz (un peu léger à mon gout ) qui tourne sur un système à 32 bits sous windows alors que sous ubuntu il tourne à 64 bits.D'ou l'idée de passer par ubuntu .
Tu me donnes donc des bonnes nouvelles et je te remercie de prendre mon problème en considération.Je viens d'installer xdtv.Après quelques réglages la vidéo fonctionne (qualité sensiblement égale à ktv ) pas de son .pour la capture je vois : grab display.
ne reste plus que ces 2 problèmes à solutionner.
Hors ligne
#9 Le 03/12/2014, à 00:08
- dof51
Re : capture video magnétoscope carte tv bt 878
erreur de ma part j'ai le son (en réglant l'audio sur lang 1 )reste plus que la capture et le problème sera en résolu
Hors ligne
#10 Le 03/12/2014, à 01:23
- dof51
Re : capture video magnétoscope carte tv bt 878
j'ai essayé de faire des captures videos: je retrouve des captures de quelques ko .essai de lecture me donne ; erreur est survenue impossible de demultiplexer le flux.
Je consulterai le forum concernant les problèmes de xdtv et ses règlages ou me tourner vers une capture d'écran.
Hors ligne
#11 Le 03/12/2014, à 17:33
- dof51
Re : capture video magnétoscope carte tv bt 878
voila ce que me renvoie le cadre du compte rendu de l'essai de capture vidéo:Divx_init : initializing FF mpeg4 – build 52,22,2
divx_init : audio:FF Mpeg n°2 MP2
recordig started wed Dec 3 11:05:37 2014
recording stopped wed Dec 3 11:06,55 2014
recordig time = 78,023668 seconds, fps=25,000000
0 video frames recorded ( 0,00000 seconds )
0 audio frames recorded (0 audio buffers, 0,000000 seconds )
1562 dropped video frames (fpscod = 0,000000 f pscapt=20,01956)
0 dropped audio buffers =0,000000 seconds)
no video frames recorded
file size = ,,0 mb, mean bitrate =0,000 kbps
rien n'a été capturé!!!!!
Hors ligne
#12 Le 03/12/2014, à 19:02
- lann
Re : capture video magnétoscope carte tv bt 878
As-tu bien lu la documentation d'xdtv, surtout le paragraphe Enregistrement video : https://doc.ubuntu-fr.org/xdtv
Hors ligne
#13 Le 04/12/2014, à 00:04
- dof51
Re : capture video magnétoscope carte tv bt 878
oui j'ai lu et essayé 1 capture video avec le container Mpeg ts codec ffmpeg >>>>> la capture donne: impossible de déterminer le type de flux les autres essais de codec donnent impossible de démultiplexer le flux.de toute façon ni video ni son ne sont enregistres, à la fin des diffèrents essais j'ai toujours l'info de mon message précèdent.c'est peut-etre la version xdtv 64 bits qui ne convient pas ou un mauvais réglage des vidéos, bref je cale.
Hors ligne
#14 Le 04/12/2014, à 19:30
- lann
Re : capture video magnétoscope carte tv bt 878
Pourrais-tu lancer xdtv dans un terminal et copier les lignes dans un post
Hors ligne
#15 Le 05/12/2014, à 00:50
- dof51
Re : capture video magnétoscope carte tv bt 878
voici ce que ça donne:
This is xdtv 2.4.1cvs16 running on Linux/x86_64 (3.13.0-40-generic).
scandir: Aucun fichier ou dossier de ce type
filename = /home/bernard/.xdtv/xdtvrc
X Error of failed request: XF86DGANoDirectVideoMode
Major opcode of failed request: 154 (XFree86-DGA)
Minor opcode of failed request: 1 (XF86DGAGetVideoLL)
Serial number of failed request: 15
Current serial number in output stream: 15
xdtv_v4l-conf had some trouble, trying to continue anyway
xinerama 0: 1440x900+0+0
Warning: Missing charsets in String to FontSet conversion
wmhooks: netwm detected
wmhooks: netwm state above supported
wmhooks: netwm fullscreen supported
wmhooks: nothing found...
DGA: server=2.0, include=2.0
VidMode: server=2.2, include=2.2
available video mode(s): 1440x900 1280x1024 1280x1024 1440x900 1280x960 1152x864 1024x768 1024x768 1024x768 832x624 800x600 800x600 800x600 800x600 640x480 640x480 640x480 640x480 720x400
Hors ligne
#16 Le 05/12/2014, à 22:55
- lann
Re : capture video magnétoscope carte tv bt 878
Et lorsque tu lances un enregistrement ?
Hors ligne
#17 Le 05/12/2014, à 23:32
- dof51
Re : capture video magnétoscope carte tv bt 878
pendant l'essai d'enregistrement:This is xdtv 2.4.1cvs16 running on Linux/x86_64 (3.13.0-40-generic).
scandir: Aucun fichier ou dossier de ce type
filename = /home/bernard/.xdtv/xdtvrc
X Error of failed request: XF86DGANoDirectVideoMode
Major opcode of failed request: 154 (XFree86-DGA)
Minor opcode of failed request: 1 (XF86DGAGetVideoLL)
Serial number of failed request: 15
Current serial number in output stream: 15
xdtv_v4l-conf had some trouble, trying to continue anyway
xinerama 0: 1440x900+0+0
Warning: Missing charsets in String to FontSet conversion
wmhooks: netwm detected
wmhooks: netwm state above supported
wmhooks: netwm fullscreen supported
wmhooks: nothing found...
DGA: server=2.0, include=2.0
VidMode: server=2.2, include=2.2
available video mode(s): 1440x900 1280x1024 1280x1024 1440x900 1280x960 1152x864 1024x768 1024x768 1024x768 832x624 800x600 800x600 800x600 800x600 640x480 640x480 640x480 640x480 720x400
Selected XvImage adaptor with yuyv support: Radeon Textured Video on port 63 (grabdisplay)
No XvVideo port available.
WARNING: video memory base unknown, may be caused by a problem
with xdtv_v4l-conf or a non-availability of DGA
and frame buffer devices: CLASSICAL OVERLAY IS DISABLED !
*** GRABBER DEVICE TYPE = v4l2
Check the linuxtv.org URLs web site. Please wait...
cannot parse url : 'http://linuxtv.org/hg/dvb-apps'
Check the linuxtv.org URLs web site. Please wait...
cannot parse url : 'http://linuxtv.org/hg/dvb-apps'
Check the linuxtv.org URLs web site. Please wait...
cannot parse url : 'http://linuxtv.org/hg/dvb-apps'
Warning: Missing charsets in String to FontSet conversion
No MMX detected
Method glibc
*** AUDIO DEVICE TYPE = alsa
*** MIXER DEVICE TYPE = alsa
Hors ligne
#18 Le 06/12/2014, à 17:47
- lann
Re : capture video magnétoscope carte tv bt 878
Tu peux lancer dans un terminal cette commande et donner le retour :
xdtv -n -noxv -c /dev/video1
puis faire l'enregistrement
Dernière modification par lann (Le 06/12/2014, à 17:48)
Hors ligne
#19 Le 06/12/2014, à 21:22
- dof51
Re : capture video magnétoscope carte tv bt 878
bernard@bernard-IMEDIA-6476:~$ xdtv -n -noxv -c /dev/video1
This is xdtv 2.4.1cvs16 running on Linux/x86_64 (3.13.0-40-generic).
scandir: Aucun fichier ou dossier de ce type
filename = /home/bernard/.xdtv/xdtvrc
*** to enable xvtv or xvtv_overlay use xvtvport option
X Error of failed request: XF86DGANoDirectVideoMode
Major opcode of failed request: 154 (XFree86-DGA)
Minor opcode of failed request: 1 (XF86DGAGetVideoLL)
Serial number of failed request: 15
Current serial number in output stream: 15
xdtv_v4l-conf had some trouble, trying to continue anyway
xinerama 0: 1440x900+0+0
Warning: Missing charsets in String to FontSet conversion
wmhooks: netwm detected
wmhooks: netwm state above supported
wmhooks: netwm fullscreen supported
wmhooks: nothing found...
DGA: server=2.0, include=2.0
VidMode: server=2.2, include=2.2
available video mode(s): 1440x900 1280x1024 1280x1024 1440x900 1280x960 1152x864 1024x768 1024x768 1024x768 832x624 800x600 800x600 800x600 800x600 640x480 640x480 640x480 640x480 720x400
Selected XvImage adaptor with yuyv support: Radeon Textured Video on port 63 (grabdisplay)
No XvVideo port available.
open /dev/video1: Aucun fichier ou dossier de ce type
open /dev/video1: Aucun fichier ou dossier de ce type
no real video grabber device available
USE DUMMY DRIVER !
*** GRABBER DEVICE TYPE = dummy
Check the linuxtv.org URLs web site. Please wait...
cannot parse url : 'http://linuxtv.org/hg/dvb-apps'
Check the linuxtv.org URLs web site. Please wait...
cannot parse url : 'http://linuxtv.org/hg/dvb-apps'
Check the linuxtv.org URLs web site. Please wait...
cannot parse url : 'http://linuxtv.org/hg/dvb-apps'
The app-defaults file is not correctly installed.
You should have installed xdtv by issuing "make install".
Your fault (core dumped).
(you can also temporarily do "cp XdTV.ad ~/XdTV",
but do not forget to remove it when xdtv is installed correctly)
bernard@bernard-IMEDIA-6476:~$
Hors ligne
#20 Le 09/12/2014, à 23:20
- dof51
Re : capture video magnétoscope carte tv bt 878
bonsoir,
malgré différents codecs utilises impossible d'enregistrer la video et le son avec xdtv. provenant d'un magnétoscope)
ma carte tv est une win tv express. Quelqu'un a-t-il déja réussi ?
Hors ligne