#1 Le 21/12/2014, à 22:05
- GabII
[résolu] Après installation Ubuntu 14.04, PC se démarre sous Windows
Bonsoir!
Je viens à vous car je suis absolument entièrement perdu.
J'ai installé Ubuntu 14.04 64 bits en dual-boot avec Windows 8.1 (sur un Asus Zenbook). J'ai d'abord fait une session Live USB, pour ensuite lancer l'installation, en choisissant l'option me proposant d'installer à côté de Windows 8.1. L'installation s'est faite, j'ai redémarré l'ordi, sauf que celui-ci se lance directement sous Windows (qui se porte toujours comme un charme, visiblement la partition n'a pas eu de ratés).
Du coup je ne comprends plus, je suis perdu.
Le Secure Boot était désactivé déjà. Je ne sais absolument pas vers quelle piste me diriger, j'ai regardé différents topics mais alors y a toujours des solutions différentes, donc finalement je reste dans le flou ahah.
Si quelqu'un a de l'expérience dans ce domaine et voulait bien sauver ma soirée, je vous en remercierait énormément!
Bonne soirée à tous
Dernière modification par GabII (Le 02/01/2015, à 19:22)
Hors ligne
#2 Le 21/12/2014, à 22:41
- nany
Re : [résolu] Après installation Ubuntu 14.04, PC se démarre sous Windows
Bonjour,
afin que l’on puisse t’aider, pourrais-tu faire un rapport Boot-Info depuis une session live et poster ici l’url en suivant cette procédure : tutoriel/boot-info.
Hors ligne
#3 Le 22/12/2014, à 00:20
- GabII
Re : [résolu] Après installation Ubuntu 14.04, PC se démarre sous Windows
Merci pour ta réponse rapide, et désolé de ma lenteur, j'ai téléchargé l'iso du logiciel (ce qui a été long vu ma connexion), avant de me rendre compte que je pouvais faire sans ._.
Mais bref, voici le lien! : ici
Dernière modification par GabII (Le 22/12/2014, à 00:51)
Hors ligne
#4 Le 22/12/2014, à 01:26
- Bougron
Re : [résolu] Après installation Ubuntu 14.04, PC se démarre sous Windows
Bonsoir
Je ne sais pas quel tuto tu as employé pour installer ubuntu, mais il me semble que tu as déraillé dés le départ.
Il est possible qu'un spécialiste te donne directement la commande pour remettre en état. Elle doit exister.
J'ai vu en ligne 1100
=================== Advice in case of suggested repair
Le démarrage de votre ordinateur est en mode Legacy. Vous voudrez peut-être ré-essayer après l'avoir changé en mode EFI.
Je pense donc que probablement tu as installé ubuntu avec avec ce mode positionné.
Hors en début de boot info, il y a
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: Windows 8/2012: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /EFI/Boot/bootx64.efi /EFI/Microsoft/Boot/bootmgfw.efi
/EFI/Microsoft/Boot/bootmgr.efi
Lorsque cette information est présente, cela sous-entend que l'installation windows est faite avec un bios EFI.
et qu'il aurait fallu faire l'installation ubuntu en ayant un bios positionné en EFI afin que les fichiers de boot de ubuntu soient aussi présents à cet endroit.
Soit tu as modifié le bios soit je me trompe dans cette analyse.
cependant, J'ai envie de faire confiance a la réparation recommandée
=================== Suggested repair
The default repair of the Boot-Repair utility would purge (in order to fix packages sign-grub) and reinstall the grub-efi-amd64-signed of sda9, using the following options: sda1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s use-standard-efi-file
Mais je ne sais pas s'il faut la faire avant ou après avoir modifié le bios pour le passer en EFI. Peut-être que cela n'a pas d'importance.
Dernière modification par Bougron (Le 22/12/2014, à 01:41)
Hors ligne
#5 Le 22/12/2014, à 02:03
- GabII
Re : [résolu] Après installation Ubuntu 14.04, PC se démarre sous Windows
Bonsoir!
Merci pour ta réponse. En effet, je pensais que l'installation s'était faite en mode EFI à vrai dire, mais ce n'est visiblement pas le cas, zut
Mais je comprends mieux l'origine du problème en effet, l'installation n'a effectivement pas été faite avec l'option "UEFI". J'ai fait cela car l'autre option me permettait de cocher l'option nomodeset, qui permettait à la live usb de lancer l'essai d'Ubuntu, et donc par là même de l'installer (là où l'autre ne le faisait pas). D'ailleurs je suis en train de réfléchir par rapport à ta dernière remarque: pour le moment je ne peux lancer BootRepair qu'à partir du live USB lancé sur le bios qui n'est pas "UEFI" (ça m'arrangerait donc si ça n'avait pas d'importance, mais j'attends d'autres avis avant d'effectuer quoi que ce soit du coup ^^).
Dans le cas où j'effectuerais la réparation, j'imagine que j'aurais des manipulations à effectuer? (je voudrais éviter de refaire une bêtise..)
PS: je viens de tomber sur le tuto, serait-ce la manip' que tu as conseillé? ici
Dernière modification par GabII (Le 22/12/2014, à 02:14)
Hors ligne
#6 Le 22/12/2014, à 12:00
- nany
Re : [résolu] Après installation Ubuntu 14.04, PC se démarre sous Windows
Mais je ne sais pas s'il faut la faire avant ou après avoir modifié le bios pour le passer en EFI. Peut-être que cela n'a pas d'importance.
Tu remarques toi-même la ligne 1100 qui, me semble-t-il, répond à ton interrogation.
Mais surtout,
J'ai envie de faire confiance a la réparation recommandée
Non, il ne faut pas faire confiance à ça car tout porte à croire pour le moment que Windows est installé en mode Legacy :
sda4: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe
@GabII :pour confirmer cela, depuis Windows, fais Démarrer puis tape "cmd" et [Ctrl]+[Maj]+[Entrée]. Ensuite, dans l’invite de ligne de commande, passe la commande suivante et donne ici le résultat.
bcdedit
Hors ligne
#7 Le 22/12/2014, à 12:51
- GabII
Re : [résolu] Après installation Ubuntu 14.04, PC se démarre sous Windows
Merci encore pour votre aide
Hors ligne
#8 Le 22/12/2014, à 12:59
- nany
Re : [résolu] Après installation Ubuntu 14.04, PC se démarre sous Windows
Donc, non, Windows est en fait installé en mode EFI.
Il faudrait donc refaire un rapport Boot-Info en ayant démarré une session live en mode EFI (voir les chapitres 2.5 et 2.6 de la page de doc uefi).
Hors ligne
#9 Le 22/12/2014, à 13:16
- GabII
Re : [résolu] Après installation Ubuntu 14.04, PC se démarre sous Windows
D'accord, pas de soucis je vois comment cela s'effectue
Maintenant j'aurais une question: quand on arrive sur cette page, en mode EFI donc, comment fait-on pour activer l'option "nomodeset"?
Parce que précisément, quand je démarre la Live USB en mode Legacy (enfin dans l'autre option disponible que celle EFI), et que j'arrive sur le menu Ubuntu proposant "Installer", "Essayer sans Installer" etc... il y a dans la ligne du bas l'option "F6 Autres" qui me permet de cocher l'option "nomodeset", or cette option "F6 Autres" n'apparaît pas sur le menu du mode EFI, je ne peux donc pas activer le "nomodeset" et ainsi cela me donne un écran noir.
Dernière modification par GabII (Le 22/12/2014, à 13:18)
Hors ligne
#10 Le 22/12/2014, à 13:28
- malbo
Re : [résolu] Après installation Ubuntu 14.04, PC se démarre sous Windows
C'est expliqué là : http://forum.ubuntu-fr.org/viewtopic.ph … #p11528561
Hors ligne
#11 Le 22/12/2014, à 13:55
- GabII
Re : [résolu] Après installation Ubuntu 14.04, PC se démarre sous Windows
Super merci!
Hors ligne
#12 Le 22/12/2014, à 14:32
- malbo
Re : [résolu] Après installation Ubuntu 14.04, PC se démarre sous Windows
Ton dernier Boot-Info est là :
Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 23Nov2014]
============================= Boot Info Summary: ===============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector
739256320 of the same hard drive for core.img. core.img is at this
location and looks for (,gpt9)/boot/grub.
=> No boot loader is installed in the MBR of /dev/sdb.
=> Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdc.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: Windows 8/2012: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /EFI/Boot/bootx64.efi /EFI/Microsoft/Boot/bootmgfw.efi
/EFI/Microsoft/Boot/bootmgr.efi
/EFI/Microsoft/Boot/memtest.efi
sda2: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /bootmgr /Boot/BCD
sda3: __________________________________________________________________________
File system:
Boot sector type: -
Boot sector info:
Mounting failed: mount: unknown filesystem type ''
sda4: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe
sda5: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda6: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda7: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda8: __________________________________________________________________________
File system: BIOS Boot partition
Boot sector type: Grub2's core.img
Boot sector info:
sda9: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 14.04.1 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/grub/i386-pc/core.img
sda10: _________________________________________________________________________
File system:
Boot sector type: -
Boot sector info:
Mounting failed: mount: unknown filesystem type ''
mount: unknown filesystem type ''
sdb1: __________________________________________________________________________
File system:
Boot sector type: -
Boot sector info:
Mounting failed: mount: unknown filesystem type ''
mount: unknown filesystem type ''
mount: unknown filesystem type ''
sdc1: __________________________________________________________________________
File system: vfat
Boot sector type: SYSLINUX 4.04 2011-04-18
Boot sector info: Syslinux looks at sector 10417008 of /dev/sdc1 for
its second stage. SYSLINUX is installed in the
directory. No errors found in the Boot Parameter Block.
Operating System:
Boot files: /boot/grub/grub.cfg /syslinux/syslinux.cfg
/casper/vmlinuz.efi /EFI/BOOT/grubx64.efi /ldlinux.sys
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 976,773,167 976,773,167 ee GPT
GUID Partition Table detected.
Partition Start Sector End Sector # of Sectors System
/dev/sda1 2,048 206,847 204,800 EFI System partition
/dev/sda2 206,848 2,050,047 1,843,200 Windows Recovery Environment (Windows)
/dev/sda3 2,050,048 2,312,191 262,144 Microsoft Reserved Partition (Windows)
/dev/sda4 2,312,192 392,099,839 389,787,648 Data partition (Windows/Linux)
/dev/sda5 392,099,840 393,021,439 921,600 Windows Recovery Environment (Windows)
/dev/sda6 393,021,440 739,255,721 346,234,282 Data partition (Windows/Linux)
/dev/sda7 934,809,600 976,773,119 41,963,520 Windows Recovery Environment (Windows)
/dev/sda8 739,256,320 739,258,367 2,048 BIOS Boot partition
/dev/sda9 739,258,368 926,660,607 187,402,240 Data partition (Linux)
/dev/sda10 926,660,608 934,809,599 8,148,992 Swap partition (Linux)
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 16.0 GB, 16013942784 bytes
255 heads, 63 sectors/track, 1946 cylinders, total 31277232 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 2,048 31,277,055 31,275,008 73 Unknown
Drive: sdc _____________________________________________________________________
Disk /dev/sdc: 8006 MB, 8006926336 bytes
255 heads, 63 sectors/track, 973 cylinders, total 15638528 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdc1 * 2,048 15,638,527 15,636,480 b W95 FAT32
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 043D-B9F1 vfat SYSTEM
/dev/sda2 EE88A1F288A1BA0B ntfs Recovery
/dev/sda4 CC82503F82503066 ntfs OS
/dev/sda5 8668CEF568CEE353 ntfs
/dev/sda6 82E2FA1BE2FA1361 ntfs DATA
/dev/sda7 90EEA95DEEA93BFA ntfs Restore
/dev/sda9 0e876380-f0af-4aab-ad37-30c6c4189ad5 ext4
/dev/sdc1 EA82-CB7D vfat MYLINUXLIVE
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Dec 22 11:52 ata-SanDisk_SSD_U110_16GB_132525402634 -> ../../sdb
lrwxrwxrwx 1 root root 10 Dec 21 12:46 ata-SanDisk_SSD_U110_16GB_132525402634-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 9 Dec 22 11:52 ata-WDC_WD5000LPVX-80V0TT0_WD-WXA1A9351532 -> ../../sda
lrwxrwxrwx 1 root root 10 Dec 21 12:46 ata-WDC_WD5000LPVX-80V0TT0_WD-WXA1A9351532-part1 -> ../../sda1
lrwxrwxrwx 1 root root 11 Dec 21 12:46 ata-WDC_WD5000LPVX-80V0TT0_WD-WXA1A9351532-part10 -> ../../sda10
lrwxrwxrwx 1 root root 10 Dec 22 11:52 ata-WDC_WD5000LPVX-80V0TT0_WD-WXA1A9351532-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Dec 21 12:46 ata-WDC_WD5000LPVX-80V0TT0_WD-WXA1A9351532-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Dec 22 11:52 ata-WDC_WD5000LPVX-80V0TT0_WD-WXA1A9351532-part4 -> ../../sda4
lrwxrwxrwx 1 root root 10 Dec 22 11:52 ata-WDC_WD5000LPVX-80V0TT0_WD-WXA1A9351532-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 Dec 22 11:52 ata-WDC_WD5000LPVX-80V0TT0_WD-WXA1A9351532-part6 -> ../../sda6
lrwxrwxrwx 1 root root 10 Dec 22 11:52 ata-WDC_WD5000LPVX-80V0TT0_WD-WXA1A9351532-part7 -> ../../sda7
lrwxrwxrwx 1 root root 10 Dec 21 12:46 ata-WDC_WD5000LPVX-80V0TT0_WD-WXA1A9351532-part8 -> ../../sda8
lrwxrwxrwx 1 root root 10 Dec 21 12:46 ata-WDC_WD5000LPVX-80V0TT0_WD-WXA1A9351532-part9 -> ../../sda9
lrwxrwxrwx 1 root root 9 Dec 22 11:52 usb-Verbatim_STORE_N_GO_079A0E09EFF737B1-0:0 -> ../../sdc
lrwxrwxrwx 1 root root 10 Dec 21 12:46 usb-Verbatim_STORE_N_GO_079A0E09EFF737B1-0:0-part1 -> ../../sdc1
lrwxrwxrwx 1 root root 9 Dec 22 11:52 wwn-0x50014ee25eaab6af -> ../../sda
lrwxrwxrwx 1 root root 10 Dec 21 12:46 wwn-0x50014ee25eaab6af-part1 -> ../../sda1
lrwxrwxrwx 1 root root 11 Dec 21 12:46 wwn-0x50014ee25eaab6af-part10 -> ../../sda10
lrwxrwxrwx 1 root root 10 Dec 22 11:52 wwn-0x50014ee25eaab6af-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Dec 21 12:46 wwn-0x50014ee25eaab6af-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Dec 22 11:52 wwn-0x50014ee25eaab6af-part4 -> ../../sda4
lrwxrwxrwx 1 root root 10 Dec 22 11:52 wwn-0x50014ee25eaab6af-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 Dec 22 11:52 wwn-0x50014ee25eaab6af-part6 -> ../../sda6
lrwxrwxrwx 1 root root 10 Dec 22 11:52 wwn-0x50014ee25eaab6af-part7 -> ../../sda7
lrwxrwxrwx 1 root root 10 Dec 21 12:46 wwn-0x50014ee25eaab6af-part8 -> ../../sda8
lrwxrwxrwx 1 root root 10 Dec 21 12:46 wwn-0x50014ee25eaab6af-part9 -> ../../sda9
lrwxrwxrwx 1 root root 9 Dec 22 11:52 wwn-0x5001b449e6b6260a -> ../../sdb
lrwxrwxrwx 1 root root 10 Dec 21 12:46 wwn-0x5001b449e6b6260a-part1 -> ../../sdb1
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sdc1 /cdrom vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
=========================== sda9/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt9'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 0e876380-f0af-4aab-ad37-30c6c4189ad5
else
search --no-floppy --fs-uuid --set=root 0e876380-f0af-4aab-ad37-30c6c4189ad5
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=-1
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=10
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=10
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-0e876380-f0af-4aab-ad37-30c6c4189ad5' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt9'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 0e876380-f0af-4aab-ad37-30c6c4189ad5
else
search --no-floppy --fs-uuid --set=root 0e876380-f0af-4aab-ad37-30c6c4189ad5
fi
linux /boot/vmlinuz-3.13.0-32-generic root=UUID=0e876380-f0af-4aab-ad37-30c6c4189ad5 ro nomodeset quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-32-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-0e876380-f0af-4aab-ad37-30c6c4189ad5' {
menuentry 'Ubuntu, avec Linux 3.13.0-32-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-32-generic-advanced-0e876380-f0af-4aab-ad37-30c6c4189ad5' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt9'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 0e876380-f0af-4aab-ad37-30c6c4189ad5
else
search --no-floppy --fs-uuid --set=root 0e876380-f0af-4aab-ad37-30c6c4189ad5
fi
echo 'Chargement de Linux 3.13.0-32-generic…'
linux /boot/vmlinuz-3.13.0-32-generic root=UUID=0e876380-f0af-4aab-ad37-30c6c4189ad5 ro nomodeset quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-32-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-32-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-32-generic-recovery-0e876380-f0af-4aab-ad37-30c6c4189ad5' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt9'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 0e876380-f0af-4aab-ad37-30c6c4189ad5
else
search --no-floppy --fs-uuid --set=root 0e876380-f0af-4aab-ad37-30c6c4189ad5
fi
echo 'Chargement de Linux 3.13.0-32-generic…'
linux /boot/vmlinuz-3.13.0-32-generic root=UUID=0e876380-f0af-4aab-ad37-30c6c4189ad5 ro recovery nomodeset nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-32-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_gpt
insmod ext2
set root='hd0,gpt9'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 0e876380-f0af-4aab-ad37-30c6c4189ad5
else
search --no-floppy --fs-uuid --set=root 0e876380-f0af-4aab-ad37-30c6c4189ad5
fi
knetbsd /boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_gpt
insmod ext2
set root='hd0,gpt9'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt9 --hint-efi=hd0,gpt9 --hint-baremetal=ahci0,gpt9 0e876380-f0af-4aab-ad37-30c6c4189ad5
else
search --no-floppy --fs-uuid --set=root 0e876380-f0af-4aab-ad37-30c6c4189ad5
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows Recovery Environment (loader) (sur /dev/sda2)' --class windows --class os $menuentry_id_option 'osprober-chain-EE88A1F288A1BA0B' {
insmod part_gpt
insmod ntfs
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 EE88A1F288A1BA0B
else
search --no-floppy --fs-uuid --set=root EE88A1F288A1BA0B
fi
drivemap -s (hd0) ${root}
chainloader +1
}
menuentry 'Windows 8 (loader) (sur /dev/sda4)' --class windows --class os $menuentry_id_option 'osprober-chain-CC82503F82503066' {
insmod part_gpt
insmod ntfs
set root='hd0,gpt4'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt4 --hint-efi=hd0,gpt4 --hint-baremetal=ahci0,gpt4 CC82503F82503066
else
search --no-floppy --fs-uuid --set=root CC82503F82503066
fi
drivemap -s (hd0) ${root}
chainloader +1
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
set timeout=10
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda9/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda9 during installation
UUID=0e876380-f0af-4aab-ad37-30c6c4189ad5 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda10 during installation
#UUID=4337f8f8-5341-4128-a5fb-b6b147da615c none swap sw 0 0
/dev/mapper/cryptswap1 none swap sw 0 0
--------------------------------------------------------------------------------
=========================== sdc1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
if loadfont /boot/grub/font.pf2 ; then
set gfxmode=auto
insmod efi_gop
insmod efi_uga
insmod gfxterm
terminal_output gfxterm
fi
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
menuentry "Try Ubuntu without installing" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
initrd /casper/initrd.lz
}
menuentry "Install Ubuntu" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash --
initrd /casper/initrd.lz
}
menuentry "OEM install (for manufacturers)" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true --
initrd /casper/initrd.lz
}
menuentry "Check disc for defects" {
set gfxpayload=keep
linux /casper/vmlinuz.efi boot=casper integrity-check quiet splash --
initrd /casper/initrd.lz
}
--------------------------------------------------------------------------------
========================= sdc1/syslinux/syslinux.cfg: ==========================
--------------------------------------------------------------------------------
# D-I config version 2.0
include menu.cfg
default vesamenu.c32
prompt 0
timeout 50
ui gfxboot bootlogo
--------------------------------------------------------------------------------
============== sdc1: Version of COM32(R) files used by Syslinux: ===============
syslinux/chain.c32 : COM32R module (v4.xx)
syslinux/gfxboot.c32 : COM32R module (v4.xx)
syslinux/vesamenu.c32 : COM32R module (v4.xx)
=============================== StdErr Messages: ===============================
cat: write error: Broken pipe
File descriptor 9 (/proc/5108/mounts) leaked on lvs invocation. Parent PID 15150: bash
File descriptor 63 (pipe:[46399]) leaked on lvs invocation. Parent PID 15150: bash
No volume groups found
ADDITIONAL INFORMATION :
=================== log of boot-info 2014-12-22__11h52 ===================
boot-info version : 4ppa26
boot-sav version : 4ppa26
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 4ppa26
boot-info is executed in live-session (Ubuntu 14.04.1 LTS, trusty, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper nomodeset
ls: cannot access /home/usr/.config: No such file or directory
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== os-prober:
/dev/sda1@/efi/Microsoft/Boot/bootmgfw.efi:Windows Boot Manager:Windows:efi
/dev/sda9:Ubuntu 14.04.1 LTS (14.04):Ubuntu:linux
=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/sda1: LABEL="SYSTEM" UUID="043D-B9F1" TYPE="vfat"
/dev/sda2: LABEL="Recovery" UUID="EE88A1F288A1BA0B" TYPE="ntfs"
/dev/sda4: LABEL="OS" UUID="CC82503F82503066" TYPE="ntfs"
/dev/sda5: UUID="8668CEF568CEE353" TYPE="ntfs"
/dev/sda6: LABEL="DATA" UUID="82E2FA1BE2FA1361" TYPE="ntfs"
/dev/sda7: LABEL="Restore" UUID="90EEA95DEEA93BFA" TYPE="ntfs"
/dev/sda9: UUID="0e876380-f0af-4aab-ad37-30c6c4189ad5" TYPE="ext4"
/dev/sdc1: LABEL="MYLINUXLIVE" UUID="EA82-CB7D" TYPE="vfat"
1 disks with OS, 2 OS : 1 Linux, 0 MacOS, 1 Windows, 0 unknown type OS.
Windows not detected by os-prober on sda4.
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util sfdisk doesn't support GPT. Use GNU Parted.
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
Presence of EFI/Microsoft file detected: /mnt/boot-sav/sda1/EFI/Microsoft/Boot/bootmgfw.efi
Presence of EFI/Boot file detected: /mnt/boot-sav/sda1/EFI/Boot/bootx64.efi
Presence of EFI/Microsoft file detected: /mnt/boot-sav/sda2/EFI/Microsoft/Boot/bootmgfw.efi
Presence of EFI/Boot file detected: /mnt/boot-sav/sda2/EFI/Boot/bootx64.efi
=================== sda9/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 Jul 22 22:21 grub.d
total 76
-rwxr-xr-x 1 root root 9424 May 15 2014 00_header
-rwxr-xr-x 1 root root 6058 May 8 2014 05_debian_theme
-rwxr-xr-x 1 root root 11608 May 15 2014 10_linux
-rwxr-xr-x 1 root root 10412 May 15 2014 20_linux_xen
-rwxr-xr-x 1 root root 1992 Mar 12 2014 20_memtest86+
-rwxr-xr-x 1 root root 11692 May 15 2014 30_os-prober
-rwxr-xr-x 1 root root 1416 May 15 2014 30_uefi-firmware
-rwxr-xr-x 1 root root 214 May 15 2014 40_custom
-rwxr-xr-x 1 root root 216 May 15 2014 41_custom
-rw-r--r-- 1 root root 483 May 15 2014 README
=================== sda9/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX="nomodeset"
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
=================== efibootmgr -v
BootCurrent: 0003
Timeout: 2 seconds
BootOrder: 0000,0003,0002
Boot0000* Windows Boot Manager HD(1,800,32000,45bff093-541a-4b82-8562-4ca1ec7d8ad5)File(EFIMicrosoftBootbootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}...6................
Boot0002* Hard Drive BIOS(2,0,00)..GO..NO........o.S.a.n.D.i.s.k. .S.S.D. .U.1.1.0. .1.6.G.B....................A...........................>..Gd-.;.A..MQ..L.3.1.5.2.5.2.0.4.6.2.4.3. . . . . . . . ........BO..NO........q.V.e.r.b.a.t.i.m.S.T.O.R.E. .N. .G.O. .5...0.0....................A.......................D..Gd-.;.A..MQ..L.V.e.r.b.a.t.i.m.S.T.O.R.E. .N. .G.O. .5...0.0........BO
Boot0003* UEFI: VerbatimSTORE N GO 5.00 ACPI(a0341d0,0)PCI(14,0)USB(3,0)HD(1,800,ee9800,0005e7d7)..BO
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
SecureBoot disabled. (maybe sec-boot, Please report this message to boot.repair@gmail.com)
=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, is-correct-EFI, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda1.
sda2 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, recovery-or-hidden, bootmgr, is-winboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda2.
sda4 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, bootmgr, is-winboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda4.
sda5 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, recovery-or-hidden, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda5.
sda6 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda6.
sda7 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, recovery-or-hidden, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda7.
sda9 : sda, not-sepboot, grubenv-ok grub2, grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, /mnt/boot-sav/sda9.
sda : GPT, BIOS_boot, has-correctEFI, not-usb, has-os, 2048 sectors * 512 bytes
=================== parted -l:
Model: ATA WDC WD5000LPVX-8 (scsi)
Disk /dev/sda: 500GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt
Number Start End Size File system Name Flags
1 1049kB 106MB 105MB fat32 EFI system partition boot
2 106MB 1050MB 944MB ntfs Basic data partition hidden, diag
3 1050MB 1184MB 134MB Microsoft reserved partition msftres
4 1184MB 201GB 200GB ntfs Basic data partition msftdata
5 201GB 201GB 472MB ntfs hidden, diag
6 201GB 378GB 177GB ntfs Basic data partition msftdata
8 378GB 379GB 1049kB bios_grub
9 379GB 474GB 95.9GB ext4
10 474GB 479GB 4172MB
7 479GB 500GB 21.5GB ntfs Basic data partition hidden, diag
Model: ATA SanDisk SSD U110 (scsi)
Disk /dev/sdb: 16.0GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 16.0GB 16.0GB primary
Model: Verbatim STORE N GO (scsi)
Disk /dev/sdc: 8007MB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 8007MB 8006MB primary fat32 boot
=================== parted -lm:
BYT;
/dev/sda:500GB:scsi:512:4096:gpt:ATA WDC WD5000LPVX-8;
1:1049kB:106MB:105MB:fat32:EFI system partition:boot;
2:106MB:1050MB:944MB:ntfs:Basic data partition:hidden, diag;
3:1050MB:1184MB:134MB::Microsoft reserved partition:msftres;
4:1184MB:201GB:200GB:ntfs:Basic data partition:msftdata;
5:201GB:201GB:472MB:ntfs::hidden, diag;
6:201GB:378GB:177GB:ntfs:Basic data partition:msftdata;
8:378GB:379GB:1049kB:::bios_grub;
9:379GB:474GB:95.9GB:ext4::;
10:474GB:479GB:4172MB:::;
7:479GB:500GB:21.5GB:ntfs:Basic data partition:hidden, diag;
BYT;
/dev/sdb:16.0GB:scsi:512:512:msdos:ATA SanDisk SSD U110;
1:1049kB:16.0GB:16.0GB:::;
BYT;
/dev/sdc:8007MB:scsi:512:512:msdos:Verbatim STORE N GO;
1:1049kB:8007MB:8006MB:fat32::boot;
=================== lsblk:
NAME TYPE FSTYPE SIZE LABEL MODEL UUID
sda disk 465.8G WDC WD50
|-sda1 part vfat 100M SYSTEM 043D-B9F1
|-sda2 part ntfs 900M Recovery EE88A1F288A1BA0B
|-sda3 part 128M
|-sda4 part ntfs 185.9G OS CC82503F82503066
|-sda5 part ntfs 450M 8668CEF568CEE353
|-sda6 part ntfs 165.1G DATA 82E2FA1BE2FA1361
|-sda7 part ntfs 20G Restore 90EEA95DEEA93BFA
|-sda8 part 1M
|-sda9 part ext4 89.4G 0e876380-f0af-4aab-ad37-30c6c4189ad5
`-sda10 part 3.9G
sdb disk 14.9G SanDisk
`-sdb1 part 14.9G
sdc disk 7.5G STORE N
`-sdc1 part vfat 7.5G MYLINUXLIVE
EA82-CB7D
loop0 loop squashfs 938.7M
KNAME ROTA RO RM STATE MOUNTPOINT
sda 1 0 0 running
sda1 1 0 0 /mnt/boot-sav/sda1
sda2 1 0 0 /mnt/boot-sav/sda2
sda3 1 0 0
sda4 1 0 0 /mnt/boot-sav/sda4
sda5 1 0 0 /mnt/boot-sav/sda5
sda6 1 0 0 /mnt/boot-sav/sda6
sda7 1 0 0 /mnt/boot-sav/sda7
sda8 1 0 0
sda9 1 0 0 /mnt/boot-sav/sda9
sda10 1 0 0
sdb 0 0 0 running
sdb1 0 0 0
sdc 1 0 1 running
sdc1 1 0 1 /cdrom
loop0 1 1 0 /rofs
=================== mount:
/cow on / type overlayfs (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sdc1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /sys/firmware/efi/efivars type efivarfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=ubuntu)
/dev/sda1 on /mnt/boot-sav/sda1 type vfat (rw)
/dev/sda2 on /mnt/boot-sav/sda2 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda4 on /mnt/boot-sav/sda4 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda5 on /mnt/boot-sav/sda5 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda6 on /mnt/boot-sav/sda6 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda7 on /mnt/boot-sav/sda7 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda9 on /mnt/boot-sav/sda9 type ext4 (rw)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda10 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 size slaves stat subsystem trace uevent
/sys/block/sdc (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdc1 size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus char console core cpu cpu_dma_latency cuse disk ecryptfs fb0 fd full fuse hidraw0 hidraw1 hpet input kmsg kvm log mapper mcelog mei mem net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda10 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sdb sdb1 sdc sdc1 sg0 sg1 sg2 shm snapshot snd stderr stdin stdout uhid uinput urandom usb v4l vga_arbiter vhci vhost-net video0 zero
ls /dev/mapper: control
=================== hexdump -n512 -C /dev/sda1
00000000 eb 58 90 4d 53 44 4f 53 35 2e 30 00 02 02 fe 19 |.X.MSDOS5.0.....|
00000010 02 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 20 03 00 01 03 00 00 00 00 00 00 02 00 00 00 |. ..............|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 01 29 f1 b9 3d 04 4e 4f 20 4e 41 4d 45 20 20 |..)..=.NO NAME |
00000050 20 20 46 41 54 33 32 20 20 20 33 c9 8e d1 bc f4 | FAT32 3.....|
00000060 7b 8e c1 8e d9 bd 00 7c 88 56 40 88 4e 02 8a 56 |{......|.V@.N..V|
00000070 40 b4 41 bb aa 55 cd 13 72 10 81 fb 55 aa 75 0a |@.A..U..r...U.u.|
00000080 f6 c1 01 74 05 fe 46 02 eb 2d 8a 56 40 b4 08 cd |...t..F..-.V@...|
00000090 13 73 05 b9 ff ff 8a f1 66 0f b6 c6 40 66 0f b6 |.s......f...@f..|
000000a0 d1 80 e2 3f f7 e2 86 cd c0 ed 06 41 66 0f b7 c9 |...?.......Af...|
000000b0 66 f7 e1 66 89 46 f8 83 7e 16 00 75 39 83 7e 2a |f..f.F..~..u9.~*|
000000c0 00 77 33 66 8b 46 1c 66 83 c0 0c bb 00 80 b9 01 |.w3f.F.f........|
000000d0 00 e8 2c 00 e9 a8 03 a1 f8 7d 80 c4 7c 8b f0 ac |..,......}..|...|
000000e0 84 c0 74 17 3c ff 74 09 b4 0e bb 07 00 cd 10 eb |..t.<.t.........|
000000f0 ee a1 fa 7d eb e4 a1 7d 80 eb df 98 cd 16 cd 19 |...}...}........|
00000100 66 60 80 7e 02 00 0f 84 20 00 66 6a 00 66 50 06 |f`.~.... .fj.fP.|
00000110 53 66 68 10 00 01 00 b4 42 8a 56 40 8b f4 cd 13 |Sfh.....B.V@....|
00000120 66 58 66 58 66 58 66 58 eb 33 66 3b 46 f8 72 03 |fXfXfXfX.3f;F.r.|
00000130 f9 eb 2a 66 33 d2 66 0f b7 4e 18 66 f7 f1 fe c2 |..*f3.f..N.f....|
00000140 8a ca 66 8b d0 66 c1 ea 10 f7 76 1a 86 d6 8a 56 |..f..f....v....V|
00000150 40 8a e8 c0 e4 06 0a cc b8 01 02 cd 13 66 61 0f |@............fa.|
00000160 82 74 ff 81 c3 00 02 66 40 49 75 94 c3 42 4f 4f |.t.....f@Iu..BOO|
00000170 54 4d 47 52 20 20 20 20 00 00 00 00 00 00 00 00 |TMGR ........|
00000180 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001a0 00 00 00 00 00 00 00 00 00 00 00 00 0d 0a 44 69 |..............Di|
000001b0 73 6b 20 65 72 72 6f 72 ff 0d 0a 50 72 65 73 73 |sk error...Press|
000001c0 20 61 6e 79 20 6b 65 79 20 74 6f 20 72 65 73 74 | any key to rest|
000001d0 61 72 74 0d 0a 00 00 00 00 00 00 00 00 00 00 00 |art.............|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 00 00 ac 01 b9 01 00 00 55 aa |..............U.|
00000200
ls /mnt/boot-sav/sda2/1:
ls /mnt/boot-sav/sda2: AsFac.log
AsPartition.ini
AsTCDProc_20140123155959.log
AsTCDProc_20140123160328.log
AsToolCDVer.txt
AsTool.state
Boot
bootmgr
bootmgr.efi
DetectResult.ini
EFI
en-us
FAC1_dism.log
FAC3_dism.log
FACLog
PASS.txt
Recovery
Sources
SWPackage.ini
System Volume Information
ToolDL.ini . Please report this message to boot.repair@gmail.com
=================== hexdump -n512 -C /dev/sda2
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 28 03 00 |........?....(..|
00000020 00 00 00 00 80 00 80 00 ff 1f 1c 00 00 00 00 00 |................|
00000030 ff 2b 01 00 00 00 00 00 ff c1 01 00 00 00 00 00 |.+..............|
00000040 f6 00 00 00 01 00 00 00 0b ba a1 88 f2 a1 88 ee |................|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 52 11 16 68 09 00 66 53 66 53 66 |h...hR..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 0a 13 b9 f6 0c fc f3 aa e9 fe 01 90 90 66 60 1e |.............f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a1 f6 01 e8 09 00 |...u...fa.......|
00000170 a1 fa 01 e8 03 00 f4 eb fd 8b f0 ac 3c 00 74 09 |............<.t.|
00000180 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 64 69 |............A di|
00000190 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 6f 63 |sk read error oc|
000001a0 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d 47 52 |curred...BOOTMGR|
000001b0 20 69 73 20 63 6f 6d 70 72 65 73 73 65 64 00 0d | is compressed..|
000001c0 0a 50 72 65 73 73 20 43 74 72 6c 2b 41 6c 74 2b |.Press Ctrl+Alt+|
000001d0 44 65 6c 20 74 6f 20 72 65 73 74 61 72 74 0d 0a |Del to restart..|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 8a 01 a7 01 bf 01 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/sda4
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 48 23 00 |........?....H#.|
00000020 00 00 00 00 80 00 80 00 ff af 3b 17 00 00 00 00 |..........;.....|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 66 30 50 82 3f 50 82 cc |........f0P.?P..|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 52 11 16 68 09 00 66 53 66 53 66 |h...hR..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 0a 13 b9 f6 0c fc f3 aa e9 fe 01 90 90 66 60 1e |.............f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a1 f6 01 e8 09 00 |...u...fa.......|
00000170 a1 fa 01 e8 03 00 f4 eb fd 8b f0 ac 3c 00 74 09 |............<.t.|
00000180 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 45 72 72 65 |............Erre|
00000190 75 72 20 6c 65 63 74 75 72 65 20 64 69 73 71 75 |ur lecture disqu|
000001a0 65 00 0d 0a 42 4f 4f 54 4d 47 52 20 63 6f 6d 70 |e...BOOTMGR comp|
000001b0 72 65 73 73 82 00 0d 0a 43 74 72 6c 2b 41 6c 74 |ress....Ctrl+Alt|
000001c0 2b 53 75 70 70 72 20 70 6f 75 72 20 72 65 64 82 |+Suppr pour red.|
000001d0 6d 61 72 72 65 72 0d 0a 00 73 74 61 72 74 0d 0a |marrer...start..|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 8a 01 a2 01 b6 01 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/sda5
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 f8 5e 17 |........?.....^.|
00000020 00 00 00 00 80 00 80 00 ff 0f 0e 00 00 00 00 00 |................|
00000030 00 96 00 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 53 e3 ce 68 f5 ce 68 86 |........S..h..h.|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 52 11 16 68 09 00 66 53 66 53 66 |h...hR..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 0a 13 b9 f6 0c fc f3 aa e9 fe 01 90 90 66 60 1e |.............f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a1 f6 01 e8 09 00 |...u...fa.......|
00000170 a1 fa 01 e8 03 00 f4 eb fd 8b f0 ac 3c 00 74 09 |............<.t.|
00000180 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 45 72 72 65 |............Erre|
00000190 75 72 20 6c 65 63 74 75 72 65 20 64 69 73 71 75 |ur lecture disqu|
000001a0 65 00 0d 0a 42 4f 4f 54 4d 47 52 20 63 6f 6d 70 |e...BOOTMGR comp|
000001b0 72 65 73 73 82 00 0d 0a 43 74 72 6c 2b 41 6c 74 |ress....Ctrl+Alt|
000001c0 2b 53 75 70 70 72 20 70 6f 75 72 20 72 65 64 82 |+Suppr pour red.|
000001d0 6d 61 72 72 65 72 0d 0a 00 73 74 61 72 74 0d 0a |marrer...start..|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 8a 01 a2 01 b6 01 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/sda6
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 6d 17 |........?.....m.|
00000020 00 00 00 00 80 00 80 00 a0 1d a3 14 00 00 00 00 |................|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 61 13 fa e2 1b fa e2 82 |........a.......|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 52 11 16 68 09 00 66 53 66 53 66 |h...hR..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 0a 13 b9 f6 0c fc f3 aa e9 fe 01 90 90 66 60 1e |.............f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a1 f6 01 e8 09 00 |...u...fa.......|
00000170 a1 fa 01 e8 03 00 f4 eb fd 8b f0 ac 3c 00 74 09 |............<.t.|
00000180 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 45 72 72 65 |............Erre|
00000190 75 72 20 6c 65 63 74 75 72 65 20 64 69 73 71 75 |ur lecture disqu|
000001a0 65 00 0d 0a 42 4f 4f 54 4d 47 52 20 63 6f 6d 70 |e...BOOTMGR comp|
000001b0 72 65 73 73 82 00 0d 0a 43 74 72 6c 2b 41 6c 74 |ress....Ctrl+Alt|
000001c0 2b 53 75 70 70 72 20 70 6f 75 72 20 72 65 64 82 |+Suppr pour red.|
000001d0 6d 61 72 72 65 72 0d 0a 00 73 74 61 72 74 0d 0a |marrer...start..|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 8a 01 a2 01 b6 01 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/sda7
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 10 b8 37 |........?......7|
00000020 00 00 00 00 80 00 80 00 ff 4f 80 02 00 00 00 00 |.........O......|
00000030 00 00 0c 00 00 00 00 00 ff 04 28 00 00 00 00 00 |..........(.....|
00000040 f6 00 00 00 01 00 00 00 fa 3b a9 ee 5d a9 ee 90 |.........;..]...|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 52 11 16 68 09 00 66 53 66 53 66 |h...hR..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 0a 13 b9 f6 0c fc f3 aa e9 fe 01 90 90 66 60 1e |.............f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a1 f6 01 e8 09 00 |...u...fa.......|
00000170 a1 fa 01 e8 03 00 f4 eb fd 8b f0 ac 3c 00 74 09 |............<.t.|
00000180 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 64 69 |............A di|
00000190 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 6f 63 |sk read error oc|
000001a0 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d 47 52 |curred...BOOTMGR|
000001b0 20 69 73 20 63 6f 6d 70 72 65 73 73 65 64 00 0d | is compressed..|
000001c0 0a 50 72 65 73 73 20 43 74 72 6c 2b 41 6c 74 2b |.Press Ctrl+Alt+|
000001d0 44 65 6c 20 74 6f 20 72 65 73 74 61 72 74 0d 0a |Del to restart..|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 8a 01 a7 01 bf 01 00 00 55 aa |..............U.|
00000200
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/cow overlayfs 1.9G 109M 1.8G 6% /
udev devtmpfs 1.9G 12K 1.9G 1% /dev
tmpfs tmpfs 384M 1.2M 383M 1% /run
/dev/sdc1 vfat 7.5G 5.2G 2.4G 69% /cdrom
/dev/loop0 squashfs 939M 939M 0 100% /rofs
none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
tmpfs tmpfs 1.9G 1.2M 1.9G 1% /tmp
none tmpfs 5.0M 0 5.0M 0% /run/lock
none tmpfs 1.9G 76K 1.9G 1% /run/shm
none tmpfs 100M 76K 100M 1% /run/user
/dev/sda1 vfat 96M 26M 71M 27% /mnt/boot-sav/sda1
/dev/sda2 fuseblk 900M 361M 540M 41% /mnt/boot-sav/sda2
/dev/sda4 fuseblk 186G 101G 86G 55% /mnt/boot-sav/sda4
/dev/sda5 fuseblk 450M 268M 183M 60% /mnt/boot-sav/sda5
/dev/sda6 fuseblk 166G 7.7G 158G 5% /mnt/boot-sav/sda6
/dev/sda7 fuseblk 21G 14G 6.4G 69% /mnt/boot-sav/sda7
/dev/sda9 ext4 88G 3.8G 80G 5% /mnt/boot-sav/sda9
=================== fdisk -l:
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x5b98f280
Device Boot Start End Blocks Id System
/dev/sda1 1 976773167 488386583+ ee GPT
Partition 1 does not start on physical sector boundary.
Disk /dev/sdb: 16.0 GB, 16013942784 bytes
255 heads, 63 sectors/track, 1946 cylinders, total 31277232 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x74f02dea
Device Boot Start End Blocks Id System
/dev/sdb1 2048 31277055 15637504 73 Unknown
Disk /dev/sdc: 8006 MB, 8006926336 bytes
255 heads, 63 sectors/track, 973 cylinders, total 15638528 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0005e7d7
Device Boot Start End Blocks Id System
/dev/sdc1 * 2048 15638527 7818240 b W95 FAT32
=================== Suggested repair
The default repair of the Boot-Repair utility would purge (in order to fix packages sign-grub) and reinstall the grub-efi-amd64-signed of sda9, using the following options: sda1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s
=================== Final advice in case of suggested repair
Please do not forget to make your BIOS boot on sda1/efi/.../grub*.efi file!
If your computer reboots directly into Windows, try to change the boot order in your BIOS.
If your BIOS does not allow to change the boot order, change the default boot entry of the Windows bootloader.
For example you can boot into Windows, then type the following command in an admin command prompt:
bcdedit /set {bootmgr} path \EFI\...\grub*.efi
=================== User settings
The settings chosen by the user will not act on the boot.
C'est parfait, tu as bien réussi à démarrer en mode EFI et on peut lire dans le rapport les intentions de réparation de Boot-Repair :
=================== Suggested repair
The default repair of the Boot-Repair utility would purge (in order to fix packages sign-grub) and reinstall the grub-efi-amd64-signed of sda9, using the following options: sda1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s
Ces intentions sont bonnes et je te conseille donc de refaire exactement comme tu viens de faire pour faire le Boot-Info mais cette fois, tu cliqueras sur le bouton(*) de la réparation recommandée.
Pendant la réparation recommandée, tu verras que le réparateur te proposera des commandes à taper : ne cherche pas à taper quoi que ce soit mais au contraire, utilise le copier-coller pour coller chaque commande proposée dans le terminal et la valider par la touche Entrée. Tu éviteras ainsi les erreurs de frappe. Si tu prends bien ton temps et que tu fais tout bien calmement tu obtiendras une réparation parfaite.
(*) clic sur "Recommended Repair" : http://www.hostingpics.net/viewer.php?i … 183928.png
EDIT : même si la réparation marche bien, tu auras besoin de l'option nomodeset pour démarrer après installation : je donne des indications ici pour cela : http://forum.ubuntu-fr.org/viewtopic.ph … 1#p9820021
C'est du provisoire, le temps que tu trouves une meilleure solution pour gérer ton affichage.
Dernière modification par malbo (Le 22/12/2014, à 14:44)
Hors ligne
#13 Le 22/12/2014, à 14:57
- kalunux
Re : [résolu] Après installation Ubuntu 14.04, PC se démarre sous Windows
Bonjour,
En fait elle n'as mème pas besoin de réparer, de plus, ça pourrais lui causé des soucis sur la priorité du démarrage.
Le plus simple et plus sur c'est de désactivé UEFI depuis le Bios et là, le menu Grub avec ces OS au démarrage lui serra proposé.
C'est aussi un avantage, car la partition EFI reste propre sans trace en cas de désinstallation d'Ubuntu.
Hors ligne
#14 Le 22/12/2014, à 15:00
- malbo
Re : [résolu] Après installation Ubuntu 14.04, PC se démarre sous Windows
Le plus simple et plus sur c'est de désactivé UEFI depuis le Bios et là, le menu Grub avec ces OS au démarrage lui serra proposé.
Ben non parce que Windows est installé en mode EFI (voir post #7) et on ne peut pas démarrer Windows installé en mode EFI en passant par Grub d'un Ubuntu installé en mode non-EFI.
Dernière modification par malbo (Le 22/12/2014, à 15:01)
Hors ligne
#15 Le 22/12/2014, à 15:12
- kalunux
Re : [résolu] Après installation Ubuntu 14.04, PC se démarre sous Windows
@Malbo
Tu es sur de toi ?
Moi je dis que si, il est tout-à-fait possible la preuve est là
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows Recovery Environment (loader) (sur /dev/sda2)' --class windows --class os $menuentry_id_option 'osprober-chain-EE88A1F288A1BA0B' {
insmod part_gpt
insmod ntfs
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 EE88A1F288A1BA0B
else
search --no-floppy --fs-uuid --set=root EE88A1F288A1BA0B
fi
drivemap -s (hd0) ${root}
chainloader +1
}
menuentry 'Windows 8 (loader) (sur /dev/sda4)' --class windows --class os $menuentry_id_option 'osprober-chain-CC82503F82503066' {
insmod part_gpt
insmod ntfs
set root='hd0,gpt4'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt4 --hint-efi=hd0,gpt4 --hint-baremetal=ahci0,gpt4 CC82503F82503066
else
search --no-floppy --fs-uuid --set=root CC82503F82503066
fi
drivemap -s (hd0) ${root}
chainloader +1
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
set timeout=10
fi
### END /etc/grub.d/30_os-prober ###
Dernière modification par kalunux (Le 22/12/2014, à 15:39)
Hors ligne
#16 Le 22/12/2014, à 15:27
- GabII
Re : [résolu] Après installation Ubuntu 14.04, PC se démarre sous Windows
Me revoilà!
J'ai suivi le Boot Repair, comme indiqué par Malbo, et j'ai maintenant le menu boot qui s'affiche, donc c'est réglé à ce niveau-ci!
Merci beaucoup pour votre aide à tous pour ce problème de GRUB, c'est un peu Noël avant l'heure à ce niveau ahah
Bon par contre comme tu l'as écrit, effectivement j'ai le droit à un écran noir au démarrage, donc je vais suivre les indications que tu m'as données, pour pouvoir lancer Ubuntu J'espère que tout va bien fonctionner, croisons les doigts!
J'ai suivi tes indications, je suis donc bien sous Ubuntu 14.04, VICTOIRE! Ahah
Maintenant, pour que je ne sois plus embêté à taper nomodeset à chaque démarrage, j'ai donc installé Boot Repair, une fois dedans Options avancées-->Grub-->Ajouter une option, et là je sélectionne "nomodeset", c'est ça? Et du coup, une fois que cela sera fait, je n'aurais plus besoin de rien toucher, ou c'est une solution temporaire? (désolé de mon incompétence, mais à vrai dire je ne saisis pas vraiment ce que fait cette option, le seul changement que je constate c'est que quand elle est activée Ubuntu démarre, et fonctionne parfaitement x)
Dernière modification par GabII (Le 22/12/2014, à 15:45)
Hors ligne
#17 Le 22/12/2014, à 15:56
- kalunux
Re : [résolu] Après installation Ubuntu 14.04, PC se démarre sous Windows
Maintenant, pour que je ne sois plus embêté à taper nomodeset à chaque démarrage, j'ai donc installé Boot Repair, une fois dedans Options avancées-->Grub-->Ajouter une option, et là je sélectionne "nomodeset", c'est ça?
Exactement !!
Mais là tu n'en n'as pas besoin car elle y-est déjà :
linux /boot/vmlinuz-3.13.0-32-generic root=UUID=0e876380-f0af-4aab-ad37-30c6c4189ad5 ro nomodeset quiet splash $vt_handoff
Donc, logiquement tu ne devrais plus avoir de soucis.
Dernière modification par kalunux (Le 22/12/2014, à 15:59)
Hors ligne
#18 Le 22/12/2014, à 16:39
- GabII
Re : [résolu] Après installation Ubuntu 14.04, PC se démarre sous Windows
J'ai du quand même l'activer avec BootRepair, car sinon ça ne marchait pas..
Maintenant j'ai un problème... Tout marchait très bien sur Ubuntu, j'ai donc lancé les mises à jour, qui se téléchargaient, et d'un coup paf, écran noir, avec juste la souris que je pouvais déplacer. J'ai attendu, et ai fini par éteindre l'ordi. Je signale bien que les mises à jour n'étaient pas terminées, je suspecte cela d'avoir provoqué une pagaille dans le système.
En effet, maintenant, quand je me connecte sur Ubuntu, déjà j'ai plus la possibilité de me connecter à internet (aucun réseau détecté), et au niveau de l'affichage, tout est normal...sauf qu'il "saute". La souris clignote, et les fenêtres que j'ouvre grossissent et rapetissent (enfin le texte qu'il y a dedans), c'est vraiment étrange oO
J'ai noté aussi, qu'ayant essayé de lancer un logiciel, lorsque la fenêtre demandant mon mot de passe s'est ouverte, le logo changeait toutes les secondes (au même rythme que le reste: souris qui clignotait et texte qui "sautait"), entre une clé et un autre logo.
Du coup je ne sais absolument pas quoi faire. J'ajoute que lorsque je cherche à éteindre l'ordinateur sous Ubuntu (en haut à droite, puis "éteindre" donc), il me propose de fermer ma session. Et une fois cela fait, je fais la même manipulation pour l'éteindre, la fenêtre s'affiche mais je n'ai qu'un bout du texte, suivi de points de ponctuation (du style "Souhaitez vous..."), et pas de bouton pour éteindre l'ordi.
Donc au niveau graphique là c'est un peu l'émeute visiblement..
Et donc je suis sous Windows, qui m'affiche maintenant fièrement qu'il est "19:39", donc il a décidé de changer d'heure entre temps.
Hors ligne
#19 Le 22/12/2014, à 16:59
- kalunux
Re : [résolu] Après installation Ubuntu 14.04, PC se démarre sous Windows
Apparemment, tu es toi aussi victime du bug de la dernière mises à jour du serveur X.
Il te faudra absolument réinstaller puis décoché ces paquets avant de valider la mises à jour :
xserver-xorg-core
xserver-common
Pour refuser la mises à jour de ces paquets.
Hors ligne
#20 Le 22/12/2014, à 17:10
- GabII
Re : [résolu] Après installation Ubuntu 14.04, PC se démarre sous Windows
D'accord, mais du coup je ne comprends pas ce qu'il faut faire actuellement
Je rentre ces deux lignes dans le terminal? (mais je n'ai pas internet, et à priori je ne peux pas l'avoir pour le moment sous Ubuntu)
Hors ligne
#21 Le 22/12/2014, à 17:41
- kalunux
Re : [résolu] Après installation Ubuntu 14.04, PC se démarre sous Windows
Non !! il faut réinstallé par dessus, c'est-à-dire tu réinstalles Ubuntu sur sda9 avec formatage, tu choisis "autre chose" à l'installation pour faire ceci, puis tu décoches la case "installer les mises à jour pendant l'installation". Une fois terminer tu redémarres sur Ubuntu, ensuite avant de lancé les mises à jour tu décoches les cases de ces paquets "xserver-xorg-core" et "xserver-common" depuis le gestionnaire de mises à jour pour refuser la mises à jour de ces paquets.
Dernière modification par kalunux (Le 22/12/2014, à 17:49)
Hors ligne
#22 Le 22/12/2014, à 18:13
- GabII
Re : [résolu] Après installation Ubuntu 14.04, PC se démarre sous Windows
Ah d'accord!
Juste une dernière petite question: j'ai également l'option "supprimer Ubuntu 14.01 et réinstaller"
Cette solution m'éviterait de manipuler les partitions, non? (à ce que j'ai compris ça ne supprimerait pas Windows?)
J'attends votre retour avant de lancer quoique ce soit. Merci encore
Hors ligne
#23 Le 22/12/2014, à 18:35
- nany
Re : [résolu] Après installation Ubuntu 14.04, PC se démarre sous Windows
[…]
Juste une dernière petite question: j'ai également l'option "supprimer Ubuntu 14.01 et réinstaller"
Cette solution m'éviterait de manipuler les partitions, non? (à ce que j'ai compris ça ne supprimerait pas Windows?)
[…]
SURTOUT PAS !!! Il y a un bug de l’installateur 14.04 et il supprime irrémédiablement Windows dans cette condition.
Il faut passer par Autre chose comme l’a préconisé kalunux.
Hors ligne
#24 Le 22/12/2014, à 18:39
- GabII
Re : [résolu] Après installation Ubuntu 14.04, PC se démarre sous Windows
D'accord! Donc j'ai sélectionné "autre chose", sélectionné la partition, et je fais juste "installer"? Le formatage se fera tout seul?
(Désolé pour ces questions, mais je ne voudrais pas faire de bêtise ^^)
Dernière modification par GabII (Le 22/12/2014, à 18:40)
Hors ligne
#25 Le 22/12/2014, à 18:39
- kalunux
Re : [résolu] Après installation Ubuntu 14.04, PC se démarre sous Windows
Ah d'accord!
Juste une dernière petite question: j'ai également l'option "supprimer Ubuntu 14.01 et réinstaller"
Cette solution m'éviterait de manipuler les partitions, non? (à ce que j'ai compris ça ne supprimerait pas Windows?)
J'attends votre retour avant de lancer quoique ce soit. Merci encore
Non !! je te dé-conseil cette solution. C'est très simple une fois arrivé sur l'écran de partitionnement après avoir choisis "autre chose" tu sélectionnes la partition "sda9" puis sur le bouton "modifier" ensuite tu lui attribue :
- Système de fichier-> "ext4"
- Point de montage-> "/"
- Tu coches la case-> "formater"
Ensuite, tu installes en vérifiant bien dans le bas que le programme de démarrage serra installer sur "/dev/sda" car c'est lui qu'il faut choisir.
Edit : Salut Nany
Dernière modification par kalunux (Le 22/12/2014, à 18:52)
Hors ligne