Ubuntu-fr

toyo

[Résolu] Corruption disque dur interne suite switch-off forcée

Bonjour,

Tout d'abord, je tiens à dire que je suis encore sous Ubuntu 12.10 (double boot win8, avec grub2, il se trouve que le disque en question est lisible par les deux systèmes) par flemme de faire une sauvegarde et d'upgrader vers une LTS...

Suite à un pb de redémarrage (l'ordi revenais toujours à la page de la cession), j'ai touché à plusieurs choses:

- remove puis reinstall signond (qui prenais 100% de l'UC)

- fais une update

- puis forcé l'ordi à s'éteindre.

maintenant il s'éteint comme il faut, mais je n'ai plus les droits sur mon disque (m'en suis aperçu en lançant Thunderbird qui laisse un message de pb de sécurité, puisque pas d'accès au fichier qui sont sur la partition données du disque interne)

Merci de votre aide.

AL

Dernière modification par toyo (Le 06/03/2015, à 12:17)

toyo

Re : [Résolu] Corruption disque dur interne suite switch-off forcée

Il se trouve qu'il semble que ce soit l'éteignage forcé qui a bloqué l'accès (read only), et qu'il faille faire un fsck... après sauvegarde

pour info sur le disque (vfat)

/dev/sda8 on /home/soler/DATA type vfat (rw,nosuid,nodev,uid=1000,gid=1000,shortname=mixed,dmask=0077,utf8=1,showexec,flush,uhelper=udisks2)

Dernière modification par toyo (Le 27/02/2015, à 14:02)

toyo

Re : [Résolu] Corruption disque dur interne suite switch-off forcée

tout à la fin l'erreur en question

   
     1.003761] Key type dns_resolver registered
[    1.004110] PM: Hibernation image not present or could not be loaded.
[    1.004121] registered taskstats version 1
[    1.006658] Key type trusted registered
[    1.008639] Key type encrypted registered
[    1.010858]   Magic number: 3:576:73
[    1.010960] rtc_cmos 00:06: setting system clock to 2015-02-27 10:03:19 UTC (1425031399)
[    1.011693] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.011694] EDD information not available.
[    1.021856] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.127412] ACPI: Battery Slot [BAT1] (battery present)
[    1.128415] Freeing unused kernel memory: 936k freed
[    1.128493] Write protecting the kernel read-only data: 12288k
[    1.131057] Freeing unused kernel memory: 1456k freed
[    1.133174] Freeing unused kernel memory: 1128k freed
[    1.143962] udevd[100]: starting version 175
[    1.164319] ahci 0000:00:1f.2: version 3.0
[    1.164402] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[    1.164433] ahci: SSS flag set, parallel bus scan disabled
[    1.164460] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode
[    1.164463] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst 
[    1.164471] ahci 0000:00:1f.2: setting latency timer to 64
[    1.165464] scsi0 : ahci
[    1.165593] scsi1 : ahci
[    1.166390] scsi2 : ahci
[    1.171321] scsi3 : ahci
[    1.174026] scsi4 : ahci
[    1.174824] scsi5 : ahci
[    1.174890] ata1: SATA max UDMA/133 abar m2048@0xc051f000 port 0xc051f100 irq 43
[    1.174892] ata2: DUMMY
[    1.174893] ata3: DUMMY
[    1.174894] ata4: DUMMY
[    1.174895] ata5: DUMMY
[    1.174896] ata6: DUMMY
[    1.263094] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[    1.395232] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.395241] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.395646] hub 1-1:1.0: USB hub found
[    1.395793] hub 1-1:1.0: 6 ports detected
[    1.490668] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.491320] ata1.00: ATA-8: SAMSUNG SSD PM830 mSATA 256GB, CXM13D1Q, max UDMA/133
[    1.491329] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.491803] ata1.00: configured for UDMA/133
[    1.492014] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG SSD PM83 CXM1 PQ: 0 ANSI: 5
[    1.492133] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[    1.492134] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.492243] sd 0:0:0:0: [sda] Write Protect is off
[    1.492248] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.492272] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.493947]  sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10
[    1.494400] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.506590] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[    1.535645] EXT4-fs (sda10): INFO: recovery required on readonly filesystem
[    1.535648] EXT4-fs (sda10): write access will be enabled during recovery
[    1.638714] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.638720] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.638985] hub 2-1:1.0: USB hub found
[    1.639085] hub 2-1:1.0: 8 ports detected
[    1.762010] EXT4-fs (sda10): recovery complete
[    1.763817] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: (null)
[    1.778071] Refined TSC clocksource calibration: 2594.110 MHz.
[    1.778076] Switching to clocksource tsc
[    1.806054] usb 3-2: new low-speed USB device number 2 using xhci_hcd
[    1.826536] usb 3-2: New USB device found, idVendor=046d, idProduct=c016
[    1.826539] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.826541] usb 3-2: Product: Optical USB Mouse
[    1.826542] usb 3-2: Manufacturer: Logitech
[    1.826943] usb 3-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[    1.897969] usb 1-1.2: new full-speed USB device number 3 using ehci_hcd
[    1.903653] Adding 7812092k swap on /dev/sda9.  Priority:-1 extents:1 across:7812092k SS
[    1.912818] udevd[388]: starting version 175
[    1.927093] lp: driver loaded but no devices found
[    1.941167] ACPI Warning: 0x0000000000000460-0x000000000000047f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
[    1.941175] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    1.941176] lpc_ich: Resource conflict(s) found affecting iTCO_wdt
[    1.941179] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
[    1.941183] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    1.941186] ACPI Warning: 0x0000000000000500-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20120320/utaddress-251)
[    1.941189] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    1.941190] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    1.950416] [drm] Initialized drm 1.1.0 20060810
[    1.956415] cfg80211: Calling CRDA to update world regulatory domain
[    1.962255] tpm_tis 00:0c: 1.2 TPM (device-id 0x3204, rev-id 64)
[    1.965756] checking generic (b0000000 7f0000) vs hw (0 0)
[    1.965763] i915 0000:00:02.0: setting latency timer to 64
[    1.966265] pci 0000:00:00.0: Intel Ivybridge Chipset
[    1.966340] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    1.974189] pci 0000:00:00.0: detected 65536K stolen memory
[    2.002022] usb 1-1.2: New USB device found, idVendor=03eb, idProduct=8409
[    2.002025] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.002027] usb 1-1.2: Product: Atmel maXTouch Digitizer
[    2.002029] usb 1-1.2: Manufacturer: Atmel
[    2.004926] wmi: Mapper loaded
[    2.008432] iwlwifi: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[    2.008435] iwlwifi: Copyright(c) 2003-2012 Intel Corporation
[    2.009608] iwlwifi 0000:02:00.0: pci_resource_len = 0x00002000
[    2.009611] iwlwifi 0000:02:00.0: pci_resource_base = ffffc900100fc000
[    2.009620] iwlwifi 0000:02:00.0: HW Revision ID = 0x24
[    2.010156] iwlwifi 0000:02:00.0: irq 44 for MSI/MSI-X
[    2.020346] i915 0000:00:02.0: irq 45 for MSI/MSI-X
[    2.020357] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    2.020358] [drm] Driver supports precise vblank timestamp query.
[    2.021568] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.053605] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x15
[    2.075950] usbcore: registered new interface driver usbhid
[    2.075953] usbhid: USB HID core driver
[    2.085614] usb 1-1.5: new high-speed USB device number 4 using ehci_hcd
[    2.092378] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[    2.097029] EXT4-fs (sda10): re-mounted. Opts: errors=remount-ro
[    2.103227] type=1400 audit(1425031400.590:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=712 comm="apparmor_parser"
[    2.103543] type=1400 audit(1425031400.590:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=712 comm="apparmor_parser"
[    2.103747] type=1400 audit(1425031400.590:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=712 comm="apparmor_parser"
[    2.145796] input: Dell WMI hotkeys as /devices/virtual/input/input4
[    2.150826] cfg80211: World regulatory domain updated:
[    2.150829] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    2.150831] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    2.150833] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    2.150835] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    2.150837] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    2.150838] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    2.153379] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/input/input5
[    2.153604] hid-generic 0003:046D:C016.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:14.0-2/input0
[    2.155820] hid-generic 0003:03EB:8409.0003: hiddev0,hidraw1: USB HID v1.11 Device [Atmel Atmel maXTouch Digitizer] on usb-0000:00:1a.0-1.2/input1
[    2.156230] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x15
[    2.158047] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1
[    2.158262] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
[    2.158264] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[    2.158266] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[    2.158268] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE enabled
[    2.158270] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_P2P disabled
[    2.158272] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6235 AGN, REV=0xB0
[    2.158347] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[    2.160923] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x15
[    2.162588] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x15
[    2.164454] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    2.175030] iwlwifi 0000:02:00.0: device EEPROM VER=0x756, CALIB=0x6
[    2.175034] iwlwifi 0000:02:00.0: Device SKU: 0x1F0
[    2.175036] iwlwifi 0000:02:00.0: Valid Tx ant: 0x3, Valid Rx ant: 0x3
[    2.175058] iwlwifi 0000:02:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[    2.175389] input: Atmel Atmel maXTouch Digitizer as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input6
[    2.175487] Registered led device: phy0-led
[    2.175509] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[    2.179141] hid-multitouch 0003:03EB:8409.0002: input,hiddev0,hidraw2: USB HID v1.11 Device [Atmel Atmel maXTouch Digitizer] on usb-0000:00:1a.0-1.2/input0
[    2.182897] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[    2.470039] usb 1-1.5: New USB device found, idVendor=1bcf, idProduct=2898
[    2.470050] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.470056] usb 1-1.5: Product: Laptop_Integrated_Webcam_1.3M
[    2.470060] usb 1-1.5: Manufacturer: CN0RDHHF7248731SE0LCA01
[    2.693605] Linux video capture interface: v2.00
[    2.694536] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_1.3M (1bcf:2898)
[    2.743959] input: CyPS/2 Cypress Trackpad as /devices/platform/i8042/serio1/input/input7
[    2.756410] usb 1-1.6: new full-speed USB device number 5 using ehci_hcd
[    2.775038] input: Laptop_Integrated_Webcam_1.3M as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input8
[    2.775088] usbcore: registered new interface driver uvcvideo
[    2.775089] USB Video Class driver (1.1.1)
[    2.850437] usb 1-1.6: New USB device found, idVendor=8087, idProduct=0a05
[    2.850497] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.850512] usb 1-1.6: Product: Intel(R) Sensor Solution
[    2.850514] usb 1-1.6: Manufacturer: Intel Corporation
[    2.850515] usb 1-1.6: SerialNumber: 184575-05dbff353738523157247009
[    2.858055] hid-generic 0003:8087:0A05.0004: hiddev0,hidraw3: USB HID v1.11 Device [Intel Corporation Intel(R) Sensor Solution] on usb-0000:00:1a.0-1.6/input0
[    2.928040] usb 2-1.5: new full-speed USB device number 3 using ehci_hcd
[    3.023874] usb 2-1.5: New USB device found, idVendor=8087, idProduct=07da
[    3.023891] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.027619] Bluetooth: Core ver 2.16
[    3.027632] NET: Registered protocol family 31
[    3.027633] Bluetooth: HCI device and connection manager initialized
[    3.027635] Bluetooth: HCI socket layer initialized
[    3.027636] Bluetooth: L2CAP socket layer initialized
[    3.027639] Bluetooth: SCO socket layer initialized
[    3.028008] usbcore: registered new interface driver btusb
[    3.321160] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[    4.134531] checking generic (b0000000 7f0000) vs hw (b0000000 10000000)
[    4.134534] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
[    4.134556] Console: switching to colour dummy device 80x25
[    4.134731] fbcon: inteldrmfb (fb0) is primary device
[    4.134797] Console: switching to colour frame buffer device 240x67
[    4.134820] fb0: inteldrmfb frame buffer device
[    4.134821] drm: registered panic notifier
[    4.138370] acpi device:3d: registered as cooling_device4
[    4.138483] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    4.138586] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
[    4.138704] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    4.138736] mei 0000:00:16.0: setting latency timer to 64
[    4.139007] mei 0000:00:16.0: irq 46 for MSI/MSI-X
[    4.144264] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[    4.152305] mei 0000:00:16.0: wd: failed to find the client
[    4.691549] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    4.691626] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    4.691687] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    5.051652] atkbd serio0: Unknown key pressed (translated set 2, code 0xa9 on isa0060/serio0).
[    5.051655] atkbd serio0: Use 'setkeycodes e029 <keycode>' to make it known.
[    8.474246] init: failsafe main process (933) killed by TERM signal
[    8.494152] ppdev: user-space parallel port driver
[    8.520254] type=1400 audit(1425031407.018:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1029 comm="apparmor_parser"
[    8.520462] Bluetooth: RFCOMM TTY layer initialized
[    8.520466] Bluetooth: RFCOMM socket layer initialized
[    8.520468] Bluetooth: RFCOMM ver 1.11
[    8.521138] type=1400 audit(1425031407.018:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1029 comm="apparmor_parser"
[    8.526901] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    8.526904] Bluetooth: BNEP filters: protocol multicast
[    8.544717] type=1400 audit(1425031407.042:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1072 comm="apparmor_parser"
[    8.545001] type=1400 audit(1425031407.042:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1069 comm="apparmor_parser"
[    8.545257] type=1400 audit(1425031407.042:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=1069 comm="apparmor_parser"
[    8.547085] type=1400 audit(1425031407.046:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=1070 comm="apparmor_parser"
[    8.547340] type=1400 audit(1425031407.046:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=1070 comm="apparmor_parser"
[    8.548045] type=1400 audit(1425031407.046:12): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1072 comm="apparmor_parser"
[    8.548226] type=1400 audit(1425031407.046:13): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1072 comm="apparmor_parser"
[    8.549878] type=1400 audit(1425031407.050:14): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=1071 comm="apparmor_parser"
[    8.640185] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[    8.647025] iwlwifi 0000:02:00.0: Radio type=0x2-0x1-0x0
[    8.938686] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[    8.945549] iwlwifi 0000:02:00.0: Radio type=0x2-0x1-0x0
[    9.043973] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    9.044174] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    9.099420] init: plymouth-stop pre-start process (1747) terminated with status 1
[   15.577938] wlan0: authenticate with 00:1d:45:d3:9d:f0
[   15.588476] wlan0: send auth to 00:1d:45:d3:9d:f0 (try 1/3)
[   15.791753] wlan0: send auth to 00:1d:45:d3:9d:f0 (try 2/3)
[   15.793181] wlan0: authenticated
[   15.795812] wlan0: associate with 00:1d:45:d3:9d:f0 (try 1/3)
[   15.797640] wlan0: RX AssocResp from 00:1d:45:d3:9d:f0 (capab=0x421 status=0 aid=194)
[   15.801728] wlan0: associated
[   15.802241] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   43.609053] FAT-fs (sda8): error, fat_get_cluster: invalid cluster chain (i_pos 409641998)
[   43.609060] FAT-fs (sda8): Filesystem has been set read-only
[   43.609074] FAT-fs (sda8): error, fat_get_cluster: invalid cluster chain (i_pos 409641998)
[   43.609078] FAT-fs (sda8): error, fat_get_cluster: invalid cluster chain (i_pos 409641998)
[   43.609080] FAT-fs (sda8): error, fat_get_cluster: invalid cluster chain (i_pos 409641998)
[   43.609081] FAT-fs (sda8): error, fat_get_cluster: invalid cluster chain (i_pos 409641998)
[   43.609083] FAT-fs (sda8): error, fat_get_cluster: invalid cluster chain (i_pos 409641998)
[   43.609085] FAT-fs (sda8): error, fat_get_cluster: invalid cluster chain (i_pos 409641998)
[   43.609087] FAT-fs (sda8): error, fat_get_cluster: invalid cluster chain (i_pos 409641998)
[   43.609088] FAT-fs (sda8): error, fat_get_cluster: invalid cluster chain (i_pos 409641998)
[   43.609091] FAT-fs (sda8): error, fat_get_cluster: invalid cluster chain (i_pos 409641998)

et le reste:

[   54.568966] wlan0: deauthenticated from 00:1d:45:d3:9d:f0 (Reason: 2)
[   54.611292] cfg80211: All devices are disconnected, going to restore regulatory settings
[   54.611297] cfg80211: Restoring regulatory settings
[   54.611301] cfg80211: Calling CRDA to update world regulatory domain
[   54.614525] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[   54.614528] cfg80211: World regulatory domain updated:
[   54.614529] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   54.614532] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   54.614533] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   54.614535] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   54.614537] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   54.614538] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   57.989315] wlan0: authenticate with 00:1d:45:d3:9d:f0
[   57.993424] wlan0: send auth to 00:1d:45:d3:9d:f0 (try 1/3)
[   57.995537] wlan0: authenticated
[   57.996328] wlan0: associate with 00:1d:45:d3:9d:f0 (try 1/3)
[   57.998180] wlan0: RX AssocResp from 00:1d:45:d3:9d:f0 (capab=0x421 status=0 aid=195)
[   58.003152] wlan0: associated
[   62.495621] wlan0: deauthenticated from 00:1d:45:d3:9d:f0 (Reason: 2)
[   62.524178] cfg80211: All devices are disconnected, going to restore regulatory settings
[   62.524184] cfg80211: Restoring regulatory settings
[   62.524188] cfg80211: Calling CRDA to update world regulatory domain
[   62.527262] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[   62.527265] cfg80211: World regulatory domain updated:
[   62.527266] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   62.527268] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   62.527269] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   62.527271] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   62.527272] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   62.527273] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   65.879059] wlan0: authenticate with 00:1d:45:d3:9d:f0
[   65.882820] wlan0: send auth to 00:1d:45:d3:9d:f0 (try 1/3)
[   65.884929] wlan0: authenticated
[   65.885382] wlan0: associate with 00:1d:45:d3:9d:f0 (try 1/3)
[   65.887145] wlan0: RX AssocResp from 00:1d:45:d3:9d:f0 (capab=0x421 status=0 aid=196)
[   65.890942] wlan0: associated
[  583.785150] audit_printk_skb: 39 callbacks suppressed
[  583.785154] type=1400 audit(1425031983.087:28): apparmor="DENIED" operation="capable" parent=3225 profile="/usr/bin/evince-thumbnailer" pid=3226 comm="evince-thumbnai" pid=3226 comm="evince-thumbnai" capability=1  capname="dac_override"
[  583.785160] type=1400 audit(1425031983.087:29): apparmor="DENIED" operation="capable" parent=3225 profile="/usr/bin/evince-thumbnailer" pid=3226 comm="evince-thumbnai" pid=3226 comm="evince-thumbnai" capability=2  capname="dac_read_search"
[  583.785243] type=1400 audit(1425031983.087:30): apparmor="DENIED" operation="capable" parent=3225 profile="/usr/bin/evince-thumbnailer" pid=3226 comm="evince-thumbnai" pid=3226 comm="evince-thumbnai" capability=3  capname="fowner"
[ 1382.432691] wlan0: deauthenticated from 00:1d:45:d3:9d:f0 (Reason: 2)
[ 1382.460782] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 1382.460801] cfg80211: Restoring regulatory settings
[ 1382.460816] cfg80211: Calling CRDA to update world regulatory domain
[ 1382.469500] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 1382.469508] cfg80211: World regulatory domain updated:
[ 1382.469511] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1382.469517] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1382.469521] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1382.469525] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1382.469528] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1382.469532] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1385.865903] wlan0: authenticate with 00:1d:45:d3:9d:f0
[ 1385.868757] wlan0: send auth to 00:1d:45:d3:9d:f0 (try 1/3)
[ 1385.870876] wlan0: authenticated
[ 1385.873351] wlan0: associate with 00:1d:45:d3:9d:f0 (try 1/3)
[ 1385.875246] wlan0: RX AssocResp from 00:1d:45:d3:9d:f0 (capab=0x421 status=0 aid=211)
[ 1385.879068] wlan0: associated
[ 3321.997552] type=1400 audit(1425034726.342:31): apparmor="DENIED" operation="capable" parent=3474 profile="/usr/bin/evince-thumbnailer" pid=3475 comm="evince-thumbnai" pid=3475 comm="evince-thumbnai" capability=1  capname="dac_override"
[ 3321.997559] type=1400 audit(1425034726.342:32): apparmor="DENIED" operation="capable" parent=3474 profile="/usr/bin/evince-thumbnailer" pid=3475 comm="evince-thumbnai" pid=3475 comm="evince-thumbnai" capability=2  capname="dac_read_search"
[ 3322.109816] type=1400 audit(1425034726.454:33): apparmor="DENIED" operation="capable" parent=3474 profile="/usr/bin/evince-thumbnailer" pid=3480 comm="evince-thumbnai" pid=3480 comm="evince-thumbnai" capability=1  capname="dac_override"
[ 3322.109824] type=1400 audit(1425034726.454:34): apparmor="DENIED" operation="capable" parent=3474 profile="/usr/bin/evince-thumbnailer" pid=3480 comm="evince-thumbnai" pid=3480 comm="evince-thumbnai" capability=2  capname="dac_read_search"
[ 3322.274795] type=1400 audit(1425034726.622:35): apparmor="DENIED" operation="capable" parent=3474 profile="/usr/bin/evince-thumbnailer" pid=3482 comm="evince-thumbnai" pid=3482 comm="evince-thumbnai" capability=1  capname="dac_override"
[ 3322.274813] type=1400 audit(1425034726.622:36): apparmor="DENIED" operation="capable" parent=3474 profile="/usr/bin/evince-thumbnailer" pid=3482 comm="evince-thumbnai" pid=3482 comm="evince-thumbnai" capability=2  capname="dac_read_search"
[ 3882.234866] wlan0: deauthenticated from 00:1d:45:d3:9d:f0 (Reason: 2)
[ 3882.260572] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 3882.260578] cfg80211: Restoring regulatory settings
[ 3882.260583] cfg80211: Calling CRDA to update world regulatory domain
[ 3882.263764] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 3882.263767] cfg80211: World regulatory domain updated:
[ 3882.263768] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3882.263770] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3882.263771] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3882.263773] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3882.263774] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3882.263775] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3885.614920] wlan0: authenticate with 00:1d:45:d3:9d:f0
[ 3885.618707] wlan0: send auth to 00:1d:45:d3:9d:f0 (try 1/3)
[ 3885.620168] wlan0: authenticated
[ 3885.623651] wlan0: associate with 00:1d:45:d3:9d:f0 (try 1/3)
[ 3885.625352] wlan0: RX AssocResp from 00:1d:45:d3:9d:f0 (capab=0x421 status=0 aid=236)
[ 3885.628678] wlan0: associated
[ 4200.469353] usb 3-2: USB disconnect, device number 2

sauriez-vous comment faire bien proprement le fsck ? Pas de contre indications majeures ?

Je vous remercie par avance pour vos suggestions !

Dernière modification par toyo (Le 28/02/2015, à 14:39)

toyo

Re : [Résolu] Corruption disque dur interne suite switch-off forcée

Je tiens simplement à mentionner que mon pb était des plus simple, l'éteinte rapide n'avait pas laissé le temps à Thunderbird de bien fermer ses préférences...
à l'ouverture de thunderbird, le disque se mettait en lecture seule...
un simple remplacement des prefs.js avec un back up a résolu le pb

A