#1 Le 24/04/2015, à 09:40
- romrom78
Réinstallation _ Ubuntu 14.04 LTS
Bonjour,
Je tourne sur Ubuntu 14.04 LTS, et constate depuis un bon moment que l'O.S. a du mal au démarrage pour se lancer.
J'ai installé hier via la logithèque, Boot Info Script. qui me donne les résultats suivants :
Boot Info Script 0.61 [1 April 2012]
============================= Boot Info Summary: ===============================
=> No boot loader is installed in the MBR of /dev/sda.
=> No boot loader is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdb1: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: According to the info in the boot sector, sdb1 starts
at sector 0. But according to the info from fdisk,
sdb1 starts at sector 2048.
Operating System:
Boot files: /efi/ubuntu/grubx64.efi /efi/ubuntu/MokManager.efi
/efi/ubuntu/shimx64.efi
sdb2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 14.04.2 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
sdb3: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 2000.4 GB, 2000398934016 bytes
255 têtes, 63 secteurs/piste, 243201 cylindres, total 3907029168 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 4096 octets
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 2,048 3,907,028,991 3,907,026,944 7 NTFS / exFAT / HPFS
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 240.1 GB, 240057409536 bytes
255 têtes, 63 secteurs/piste, 29185 cylindres, total 468862128 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Taille de secteur (logique / physique) : 512 octets / 512 octets
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 1 468,862,127 468,862,127 ee GPT
GUID Partition Table detected.
Partition Start Sector End Sector # of Sectors System
/dev/sdb1 2,048 999,423 997,376 EFI System partition
/dev/sdb2 999,424 435,959,807 434,960,384 Data partition (Linux)
/dev/sdb3 435,959,808 468,860,927 32,901,120 Swap partition (Linux)
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 1AEC06034F3489AF ntfs DATA
/dev/sdb1 D6D0-E614 vfat
/dev/sdb2 21aabcc9-32ee-46e1-82bc-471b76dbc8d0 ext4
/dev/sdb3 50f5111b-905a-43e2-b19c-51787f61220c swap
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sdb1 /boot/efi vfat (rw)
/dev/sdb2 / ext4 (rw,errors=remount-ro)
=========================== sdb2/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
else
search --no-floppy --fs-uuid --set=root 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=-1
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=hidden
set timeout=0
# Fallback hidden-timeout code in case the timeout_style feature is
# unavailable.
elif sleep --interruptible 0 ; then
set timeout=0
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-21aabcc9-32ee-46e1-82bc-471b76dbc8d0' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
else
search --no-floppy --fs-uuid --set=root 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
fi
linux /boot/vmlinuz-3.13.0-49-generic.efi.signed root=UUID=21aabcc9-32ee-46e1-82bc-471b76dbc8d0 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-49-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-21aabcc9-32ee-46e1-82bc-471b76dbc8d0' {
menuentry 'Ubuntu, avec Linux 3.13.0-49-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-49-generic-advanced-21aabcc9-32ee-46e1-82bc-471b76dbc8d0' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
else
search --no-floppy --fs-uuid --set=root 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
fi
echo 'Chargement de Linux 3.13.0-49-generic…'
linux /boot/vmlinuz-3.13.0-49-generic.efi.signed root=UUID=21aabcc9-32ee-46e1-82bc-471b76dbc8d0 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-49-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-49-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-49-generic-recovery-21aabcc9-32ee-46e1-82bc-471b76dbc8d0' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
else
search --no-floppy --fs-uuid --set=root 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
fi
echo 'Chargement de Linux 3.13.0-49-generic…'
linux /boot/vmlinuz-3.13.0-49-generic.efi.signed root=UUID=21aabcc9-32ee-46e1-82bc-471b76dbc8d0 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-49-generic
}
menuentry 'Ubuntu, avec Linux 3.13.0-48-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-48-generic-advanced-21aabcc9-32ee-46e1-82bc-471b76dbc8d0' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
else
search --no-floppy --fs-uuid --set=root 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
fi
echo 'Chargement de Linux 3.13.0-48-generic…'
linux /boot/vmlinuz-3.13.0-48-generic.efi.signed root=UUID=21aabcc9-32ee-46e1-82bc-471b76dbc8d0 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-48-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-48-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-48-generic-recovery-21aabcc9-32ee-46e1-82bc-471b76dbc8d0' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
else
search --no-floppy --fs-uuid --set=root 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
fi
echo 'Chargement de Linux 3.13.0-48-generic…'
linux /boot/vmlinuz-3.13.0-48-generic.efi.signed root=UUID=21aabcc9-32ee-46e1-82bc-471b76dbc8d0 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-48-generic
}
menuentry 'Ubuntu, avec Linux 3.13.0-46-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-46-generic-advanced-21aabcc9-32ee-46e1-82bc-471b76dbc8d0' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
else
search --no-floppy --fs-uuid --set=root 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
fi
echo 'Chargement de Linux 3.13.0-46-generic…'
linux /boot/vmlinuz-3.13.0-46-generic.efi.signed root=UUID=21aabcc9-32ee-46e1-82bc-471b76dbc8d0 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-46-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-46-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-46-generic-recovery-21aabcc9-32ee-46e1-82bc-471b76dbc8d0' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
else
search --no-floppy --fs-uuid --set=root 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
fi
echo 'Chargement de Linux 3.13.0-46-generic…'
linux /boot/vmlinuz-3.13.0-46-generic.efi.signed root=UUID=21aabcc9-32ee-46e1-82bc-471b76dbc8d0 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-46-generic
}
menuentry 'Ubuntu, avec Linux 3.13.0-45-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-45-generic-advanced-21aabcc9-32ee-46e1-82bc-471b76dbc8d0' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
else
search --no-floppy --fs-uuid --set=root 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
fi
echo 'Chargement de Linux 3.13.0-45-generic…'
linux /boot/vmlinuz-3.13.0-45-generic.efi.signed root=UUID=21aabcc9-32ee-46e1-82bc-471b76dbc8d0 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-45-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-45-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-45-generic-recovery-21aabcc9-32ee-46e1-82bc-471b76dbc8d0' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
else
search --no-floppy --fs-uuid --set=root 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
fi
echo 'Chargement de Linux 3.13.0-45-generic…'
linux /boot/vmlinuz-3.13.0-45-generic.efi.signed root=UUID=21aabcc9-32ee-46e1-82bc-471b76dbc8d0 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-45-generic
}
menuentry 'Ubuntu, avec Linux 3.13.0-44-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-44-generic-advanced-21aabcc9-32ee-46e1-82bc-471b76dbc8d0' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
else
search --no-floppy --fs-uuid --set=root 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
fi
echo 'Chargement de Linux 3.13.0-44-generic…'
linux /boot/vmlinuz-3.13.0-44-generic.efi.signed root=UUID=21aabcc9-32ee-46e1-82bc-471b76dbc8d0 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-44-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-44-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-44-generic-recovery-21aabcc9-32ee-46e1-82bc-471b76dbc8d0' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
else
search --no-floppy --fs-uuid --set=root 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
fi
echo 'Chargement de Linux 3.13.0-44-generic…'
linux /boot/vmlinuz-3.13.0-44-generic.efi.signed root=UUID=21aabcc9-32ee-46e1-82bc-471b76dbc8d0 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-44-generic
}
menuentry 'Ubuntu, avec Linux 3.13.0-43-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-43-generic-advanced-21aabcc9-32ee-46e1-82bc-471b76dbc8d0' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
else
search --no-floppy --fs-uuid --set=root 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
fi
echo 'Chargement de Linux 3.13.0-43-generic…'
linux /boot/vmlinuz-3.13.0-43-generic.efi.signed root=UUID=21aabcc9-32ee-46e1-82bc-471b76dbc8d0 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-43-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-43-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-43-generic-recovery-21aabcc9-32ee-46e1-82bc-471b76dbc8d0' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
else
search --no-floppy --fs-uuid --set=root 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
fi
echo 'Chargement de Linux 3.13.0-43-generic…'
linux /boot/vmlinuz-3.13.0-43-generic.efi.signed root=UUID=21aabcc9-32ee-46e1-82bc-471b76dbc8d0 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-43-generic
}
menuentry 'Ubuntu, avec Linux 3.13.0-41-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-41-generic-advanced-21aabcc9-32ee-46e1-82bc-471b76dbc8d0' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
else
search --no-floppy --fs-uuid --set=root 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
fi
echo 'Chargement de Linux 3.13.0-41-generic…'
linux /boot/vmlinuz-3.13.0-41-generic.efi.signed root=UUID=21aabcc9-32ee-46e1-82bc-471b76dbc8d0 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-41-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-41-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-41-generic-recovery-21aabcc9-32ee-46e1-82bc-471b76dbc8d0' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
else
search --no-floppy --fs-uuid --set=root 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
fi
echo 'Chargement de Linux 3.13.0-41-generic…'
linux /boot/vmlinuz-3.13.0-41-generic.efi.signed root=UUID=21aabcc9-32ee-46e1-82bc-471b76dbc8d0 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-41-generic
}
menuentry 'Ubuntu, avec Linux 3.13.0-40-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-40-generic-advanced-21aabcc9-32ee-46e1-82bc-471b76dbc8d0' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
else
search --no-floppy --fs-uuid --set=root 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
fi
echo 'Chargement de Linux 3.13.0-40-generic…'
linux /boot/vmlinuz-3.13.0-40-generic.efi.signed root=UUID=21aabcc9-32ee-46e1-82bc-471b76dbc8d0 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-40-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-40-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-40-generic-recovery-21aabcc9-32ee-46e1-82bc-471b76dbc8d0' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
else
search --no-floppy --fs-uuid --set=root 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
fi
echo 'Chargement de Linux 3.13.0-40-generic…'
linux /boot/vmlinuz-3.13.0-40-generic.efi.signed root=UUID=21aabcc9-32ee-46e1-82bc-471b76dbc8d0 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-40-generic
}
menuentry 'Ubuntu, avec Linux 3.13.0-39-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-39-generic-advanced-21aabcc9-32ee-46e1-82bc-471b76dbc8d0' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
else
search --no-floppy --fs-uuid --set=root 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
fi
echo 'Chargement de Linux 3.13.0-39-generic…'
linux /boot/vmlinuz-3.13.0-39-generic.efi.signed root=UUID=21aabcc9-32ee-46e1-82bc-471b76dbc8d0 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-39-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-39-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-39-generic-recovery-21aabcc9-32ee-46e1-82bc-471b76dbc8d0' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
else
search --no-floppy --fs-uuid --set=root 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
fi
echo 'Chargement de Linux 3.13.0-39-generic…'
linux /boot/vmlinuz-3.13.0-39-generic.efi.signed root=UUID=21aabcc9-32ee-46e1-82bc-471b76dbc8d0 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-39-generic
}
menuentry 'Ubuntu, avec Linux 3.13.0-37-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-37-generic-advanced-21aabcc9-32ee-46e1-82bc-471b76dbc8d0' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
else
search --no-floppy --fs-uuid --set=root 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
fi
echo 'Chargement de Linux 3.13.0-37-generic…'
linux /boot/vmlinuz-3.13.0-37-generic.efi.signed root=UUID=21aabcc9-32ee-46e1-82bc-471b76dbc8d0 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-37-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-37-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-37-generic-recovery-21aabcc9-32ee-46e1-82bc-471b76dbc8d0' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
else
search --no-floppy --fs-uuid --set=root 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
fi
echo 'Chargement de Linux 3.13.0-37-generic…'
linux /boot/vmlinuz-3.13.0-37-generic.efi.signed root=UUID=21aabcc9-32ee-46e1-82bc-471b76dbc8d0 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-37-generic
}
menuentry 'Ubuntu, avec Linux 3.13.0-36-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-36-generic-advanced-21aabcc9-32ee-46e1-82bc-471b76dbc8d0' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
else
search --no-floppy --fs-uuid --set=root 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
fi
echo 'Chargement de Linux 3.13.0-36-generic…'
linux /boot/vmlinuz-3.13.0-36-generic.efi.signed root=UUID=21aabcc9-32ee-46e1-82bc-471b76dbc8d0 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-36-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-36-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-36-generic-recovery-21aabcc9-32ee-46e1-82bc-471b76dbc8d0' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
else
search --no-floppy --fs-uuid --set=root 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
fi
echo 'Chargement de Linux 3.13.0-36-generic…'
linux /boot/vmlinuz-3.13.0-36-generic.efi.signed root=UUID=21aabcc9-32ee-46e1-82bc-471b76dbc8d0 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-36-generic
}
menuentry 'Ubuntu, avec Linux 3.13.0-35-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-35-generic-advanced-21aabcc9-32ee-46e1-82bc-471b76dbc8d0' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
else
search --no-floppy --fs-uuid --set=root 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
fi
echo 'Chargement de Linux 3.13.0-35-generic…'
linux /boot/vmlinuz-3.13.0-35-generic.efi.signed root=UUID=21aabcc9-32ee-46e1-82bc-471b76dbc8d0 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-35-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-35-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-35-generic-recovery-21aabcc9-32ee-46e1-82bc-471b76dbc8d0' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
else
search --no-floppy --fs-uuid --set=root 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
fi
echo 'Chargement de Linux 3.13.0-35-generic…'
linux /boot/vmlinuz-3.13.0-35-generic.efi.signed root=UUID=21aabcc9-32ee-46e1-82bc-471b76dbc8d0 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-35-generic
}
menuentry 'Ubuntu, avec Linux 3.13.0-34-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-34-generic-advanced-21aabcc9-32ee-46e1-82bc-471b76dbc8d0' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
else
search --no-floppy --fs-uuid --set=root 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
fi
echo 'Chargement de Linux 3.13.0-34-generic…'
linux /boot/vmlinuz-3.13.0-34-generic.efi.signed root=UUID=21aabcc9-32ee-46e1-82bc-471b76dbc8d0 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-34-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-34-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-34-generic-recovery-21aabcc9-32ee-46e1-82bc-471b76dbc8d0' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
else
search --no-floppy --fs-uuid --set=root 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
fi
echo 'Chargement de Linux 3.13.0-34-generic…'
linux /boot/vmlinuz-3.13.0-34-generic.efi.signed root=UUID=21aabcc9-32ee-46e1-82bc-471b76dbc8d0 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-34-generic
}
menuentry 'Ubuntu, avec Linux 3.13.0-33-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-33-generic-advanced-21aabcc9-32ee-46e1-82bc-471b76dbc8d0' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
else
search --no-floppy --fs-uuid --set=root 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
fi
echo 'Chargement de Linux 3.13.0-33-generic…'
linux /boot/vmlinuz-3.13.0-33-generic.efi.signed root=UUID=21aabcc9-32ee-46e1-82bc-471b76dbc8d0 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-33-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-33-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-33-generic-recovery-21aabcc9-32ee-46e1-82bc-471b76dbc8d0' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
else
search --no-floppy --fs-uuid --set=root 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
fi
echo 'Chargement de Linux 3.13.0-33-generic…'
linux /boot/vmlinuz-3.13.0-33-generic.efi.signed root=UUID=21aabcc9-32ee-46e1-82bc-471b76dbc8d0 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-33-generic
}
menuentry 'Ubuntu, avec Linux 3.13.0-32-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-32-generic-advanced-21aabcc9-32ee-46e1-82bc-471b76dbc8d0' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
else
search --no-floppy --fs-uuid --set=root 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
fi
echo 'Chargement de Linux 3.13.0-32-generic…'
linux /boot/vmlinuz-3.13.0-32-generic.efi.signed root=UUID=21aabcc9-32ee-46e1-82bc-471b76dbc8d0 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-32-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-32-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-32-generic-recovery-21aabcc9-32ee-46e1-82bc-471b76dbc8d0' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
else
search --no-floppy --fs-uuid --set=root 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
fi
echo 'Chargement de Linux 3.13.0-32-generic…'
linux /boot/vmlinuz-3.13.0-32-generic.efi.signed root=UUID=21aabcc9-32ee-46e1-82bc-471b76dbc8d0 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-32-generic
}
menuentry 'Ubuntu, avec Linux 3.13.0-30-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-30-generic-advanced-21aabcc9-32ee-46e1-82bc-471b76dbc8d0' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
else
search --no-floppy --fs-uuid --set=root 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
fi
echo 'Chargement de Linux 3.13.0-30-generic…'
linux /boot/vmlinuz-3.13.0-30-generic.efi.signed root=UUID=21aabcc9-32ee-46e1-82bc-471b76dbc8d0 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-30-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-30-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-30-generic-recovery-21aabcc9-32ee-46e1-82bc-471b76dbc8d0' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
else
search --no-floppy --fs-uuid --set=root 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
fi
echo 'Chargement de Linux 3.13.0-30-generic…'
linux /boot/vmlinuz-3.13.0-30-generic.efi.signed root=UUID=21aabcc9-32ee-46e1-82bc-471b76dbc8d0 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-30-generic
}
menuentry 'Ubuntu, avec Linux 3.13.0-29-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-29-generic-advanced-21aabcc9-32ee-46e1-82bc-471b76dbc8d0' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
else
search --no-floppy --fs-uuid --set=root 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
fi
echo 'Chargement de Linux 3.13.0-29-generic…'
linux /boot/vmlinuz-3.13.0-29-generic.efi.signed root=UUID=21aabcc9-32ee-46e1-82bc-471b76dbc8d0 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-29-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-29-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-29-generic-recovery-21aabcc9-32ee-46e1-82bc-471b76dbc8d0' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
else
search --no-floppy --fs-uuid --set=root 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
fi
echo 'Chargement de Linux 3.13.0-29-generic…'
linux /boot/vmlinuz-3.13.0-29-generic.efi.signed root=UUID=21aabcc9-32ee-46e1-82bc-471b76dbc8d0 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-29-generic
}
menuentry 'Ubuntu, avec Linux 3.13.0-27-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-27-generic-advanced-21aabcc9-32ee-46e1-82bc-471b76dbc8d0' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
else
search --no-floppy --fs-uuid --set=root 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
fi
echo 'Chargement de Linux 3.13.0-27-generic…'
linux /boot/vmlinuz-3.13.0-27-generic.efi.signed root=UUID=21aabcc9-32ee-46e1-82bc-471b76dbc8d0 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-27-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-27-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-27-generic-recovery-21aabcc9-32ee-46e1-82bc-471b76dbc8d0' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
else
search --no-floppy --fs-uuid --set=root 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
fi
echo 'Chargement de Linux 3.13.0-27-generic…'
linux /boot/vmlinuz-3.13.0-27-generic.efi.signed root=UUID=21aabcc9-32ee-46e1-82bc-471b76dbc8d0 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-27-generic
}
menuentry 'Ubuntu, avec Linux 3.13.0-24-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-advanced-21aabcc9-32ee-46e1-82bc-471b76dbc8d0' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
else
search --no-floppy --fs-uuid --set=root 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
fi
echo 'Chargement de Linux 3.13.0-24-generic…'
linux /boot/vmlinuz-3.13.0-24-generic.efi.signed root=UUID=21aabcc9-32ee-46e1-82bc-471b76dbc8d0 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-24-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-24-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-24-generic-recovery-21aabcc9-32ee-46e1-82bc-471b76dbc8d0' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
else
search --no-floppy --fs-uuid --set=root 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
fi
echo 'Chargement de Linux 3.13.0-24-generic…'
linux /boot/vmlinuz-3.13.0-24-generic.efi.signed root=UUID=21aabcc9-32ee-46e1-82bc-471b76dbc8d0 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-24-generic
}
menuentry 'Ubuntu, avec Linux 3.11.0-20-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.11.0-20-generic-advanced-21aabcc9-32ee-46e1-82bc-471b76dbc8d0' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
else
search --no-floppy --fs-uuid --set=root 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
fi
echo 'Chargement de Linux 3.11.0-20-generic…'
linux /boot/vmlinuz-3.11.0-20-generic.efi.signed root=UUID=21aabcc9-32ee-46e1-82bc-471b76dbc8d0 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.11.0-20-generic
}
menuentry 'Ubuntu, with Linux 3.11.0-20-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.11.0-20-generic-recovery-21aabcc9-32ee-46e1-82bc-471b76dbc8d0' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
else
search --no-floppy --fs-uuid --set=root 21aabcc9-32ee-46e1-82bc-471b76dbc8d0
fi
echo 'Chargement de Linux 3.11.0-20-generic…'
linux /boot/vmlinuz-3.11.0-20-generic.efi.signed root=UUID=21aabcc9-32ee-46e1-82bc-471b76dbc8d0 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.11.0-20-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sdb2/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sdb2 during installation
UUID=21aabcc9-32ee-46e1-82bc-471b76dbc8d0 / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sdb1 during installation
UUID=D6D0-E614 /boot/efi vfat defaults 0 1
# swap was on /dev/sdb3 during installation
UUID=50f5111b-905a-43e2-b19c-51787f61220c none swap sw 0 0
--------------------------------------------------------------------------------
=================== sdb2: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
=============================== StdErr Messages: ===============================
cat: /tmp/BootInfo-erkjwGLF/Tmp_Log: Aucun fichier ou dossier de ce type
J'ai redémarré le PC et bien qu'il y est eu un mieux, quand à la vitesse de démarrage, j'ai dû m'y reprendre quand même en deux trois fois, avant que l'O.S. ne se lance correctement.
Alors, je ne sais pas ce qu'il faut faire : est-ce qu'il y a une modification à faire dès le BIOS, ou est-ce qu'il faut directement réinstaller Ubuntu 14.04 LTS ?
Pour info, c'est un PC domestique, qui se compose d'un disque SSD dédié à l'installation d'Ubuntu, et d'un disque dur HDD pour le Data.
Une autre question est importante, si au final il faut réinstaller l'O.S : est-ce que mes fichiers et dossiers perso seront effacés, ou est-ce que via le Live Cd, il est possible de réparer l'installation déjà en place sans écraser mes données ?
Merci pour votre aide qui sera la bienvenue;
Version actuelle : Ubuntu 20.04.1 LTS
Hors ligne
#2 Le 24/04/2015, à 10:23
- olivi4
Re : Réinstallation _ Ubuntu 14.04 LTS
Bonjour,
Est-ce que tu as essayé de booter sur un noyau plus ancien ?
La philosophie nous enseigne à douter de ce qui nous paraît évident. La propagande, au contraire, nous enseigne à accepter pour évident ce dont il serait raisonnable de douter. (Aldous Huxley)
"La plus grande partie de la souffrance humaine est inutile. On se l'inflige à soi-même aussi longtemps que, à son insu, on laisse le mental prendre le contrôle de sa vie". (E. Tolle)
Hors ligne
#3 Le 24/04/2015, à 10:32
- Bougron
Re : Réinstallation _ Ubuntu 14.04 LTS
Bonjour
Peux-tu faire la commande
dmesg
et poster le résultat. Cela permettra de vérifier les points d'attente
Peux-tu aussi installer le logiciel GSmartControl qui est dans la logithèque puis de faire la commande
sudo smartctl -a /dev/sda
qui donnera l'état du disque dur. (Fais un copier/coller du résultat).
et aussi
sudo smartctl -a /dev/sdb
qui donnera l'état du SSD du moins je l'espère . (Fais un copier/coller du résultat).
PS Fais comme si cette information n'existait pas
Les fichiers de démarrage de [L'OS actuellement utilisé - Ubuntu 14.04.2 LTS] sont loin du début du disque. Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer après avoir créé une partition /boot (EXT4, >200MB, en début de disque). Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition via l'option [Partition /boot séparée :] de [Réparateur de démarrage]. (http://doc.ubuntu-fr.org/tutoriel/partition_boot)
Avant de décider de faire une réinstallation, il faut comprendre la cause, Par exemple si tu as un câble qui fait un faux-contact, la réinstallation ne changera rien et lorsque le faux contact sera réparé la réinstallation sera inutile.
Lorsque tu as l'OS sur un disque et les données sur un autre, Il y a vraiment peu de chance que les données soient perdues. Mais ce n'est pas une raison d'oublier de les sauver régulièrement sur un support externe.
Dernière modification par Bougron (Le 24/04/2015, à 10:49)
Hors ligne
#4 Le 24/04/2015, à 10:33
- romrom78
Re : Réinstallation _ Ubuntu 14.04 LTS
Bonjour olivi4,
non, par contre je viens de faire un boot info via boot repair et j'obtiens ceci à la fin du document :
EFI détecté. Veuillez vérifier les options.
=================== Final advice in case of recommended repair
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le fichier sdb1/efi/.../grub*.efi !
Les fichiers de démarrage de [L'OS actuellement utilisé - Ubuntu 14.04.2 LTS] sont loin du début du disque. Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer après avoir créé une partition /boot (EXT4, >200MB, en début de disque). Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition via l'option [Partition /boot séparée :] de [Réparateur de démarrage]. (http://doc.ubuntu-fr.org/tutoriel/partition_boot)
=================== Default settings
Recommended-Repair
This setting would purge (in order to sign-grub upgrade version) and reinstall the grub-efi-amd64-signed of sdb2, using the following options: upgrade-grub sdb1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s
=================== Settings chosen by the user
Boot-Info
This setting will not act on the MBR.
Aucun changement n'a été effectué sur cet ordinateur.
Dernière modification par romrom78 (Le 24/04/2015, à 10:38)
Version actuelle : Ubuntu 20.04.1 LTS
Hors ligne
#5 Le 24/04/2015, à 10:35
- romrom78
Re : Réinstallation _ Ubuntu 14.04 LTS
Bonjour Bougron,
voici le résultat de dmesg :
[ 0.409661] software IO TLB [mem 0xbb105000-0xbf105000] (64MB) mapped at [ffff8800bb105000-ffff8800bf104fff]
[ 0.409777] microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x7
[ 0.409781] microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x7
[ 0.409786] microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x7
[ 0.409790] microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x7
[ 0.409817] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.409818] Scanning for low memory corruption every 60 seconds
[ 0.409972] Initialise system trusted keyring
[ 0.410000] audit: initializing netlink socket (disabled)
[ 0.410006] type=2000 audit(1429863227.404:1): initialized
[ 0.428304] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.429062] zbud: loaded
[ 0.429154] VFS: Disk quotas dquot_6.5.2
[ 0.429181] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.429423] fuse init (API version 7.22)
[ 0.429462] msgmni has been set to 31464
[ 0.429492] Key type big_key registered
[ 0.429743] Key type asymmetric registered
[ 0.429744] Asymmetric key parser 'x509' registered
[ 0.429761] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.429782] io scheduler noop registered
[ 0.429783] io scheduler deadline registered (default)
[ 0.429797] io scheduler cfq registered
[ 0.429909] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.430069] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.430078] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.430103] intel_idle: MWAIT substates: 0x42120
[ 0.430104] intel_idle: v0.4 model 0x3C
[ 0.430105] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.430171] ipmi message handler version 39.2
[ 0.430221] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.430224] ACPI: Power Button [PWRB]
[ 0.430243] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.430244] ACPI: Power Button [PWRF]
[ 0.430280] ACPI: Fan [FAN0] (off)
[ 0.430293] ACPI: Fan [FAN1] (off)
[ 0.430306] ACPI: Fan [FAN2] (off)
[ 0.430317] ACPI: Fan [FAN3] (off)
[ 0.430330] ACPI: Fan [FAN4] (off)
[ 0.430558] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.430559] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.430675] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.430675] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.430694] GHES: HEST is not enabled!
[ 0.430740] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.451109] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.451882] Linux agpgart interface v0.103
[ 0.452603] brd: module loaded
[ 0.452967] loop: module loaded
[ 0.453176] libphy: Fixed MDIO Bus: probed
[ 0.453222] tun: Universal TUN/TAP device driver, 1.6
[ 0.453223] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.453242] PPP generic driver version 2.4.2
[ 0.453266] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.453268] ehci-pci: EHCI PCI platform driver
[ 0.453333] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.453336] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.453346] ehci-pci 0000:00:1a.0: debug port 2
[ 0.457243] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.457256] ehci-pci 0000:00:1a.0: irq 20, io mem 0xf2e1c000
[ 0.469164] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.469186] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.469188] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.469189] usb usb1: Product: EHCI Host Controller
[ 0.469190] usb usb1: Manufacturer: Linux 3.13.0-49-generic ehci_hcd
[ 0.469190] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.469259] hub 1-0:1.0: USB hub found
[ 0.469262] hub 1-0:1.0: 2 ports detected
[ 0.469379] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.469382] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.469391] ehci-pci 0000:00:1d.0: debug port 2
[ 0.473296] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.473309] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf2e1b000
[ 0.485201] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.485224] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.485226] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.485227] usb usb2: Product: EHCI Host Controller
[ 0.485228] usb usb2: Manufacturer: Linux 3.13.0-49-generic ehci_hcd
[ 0.485228] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.485321] hub 2-0:1.0: USB hub found
[ 0.485325] hub 2-0:1.0: 2 ports detected
[ 0.485388] ehci-platform: EHCI generic platform driver
[ 0.485392] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.485393] ohci-pci: OHCI PCI platform driver
[ 0.485397] ohci-platform: OHCI generic platform driver
[ 0.485401] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.485469] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.485472] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.485542] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.485554] xhci_hcd 0000:00:14.0: irq 41 for MSI/MSI-X
[ 0.485596] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.485597] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.485598] usb usb3: Product: xHCI Host Controller
[ 0.485599] usb usb3: Manufacturer: Linux 3.13.0-49-generic xhci_hcd
[ 0.485600] usb usb3: SerialNumber: 0000:00:14.0
[ 0.485684] hub 3-0:1.0: USB hub found
[ 0.485696] hub 3-0:1.0: 14 ports detected
[ 0.487102] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.487105] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 0.487125] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.487127] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.487128] usb usb4: Product: xHCI Host Controller
[ 0.487129] usb usb4: Manufacturer: Linux 3.13.0-49-generic xhci_hcd
[ 0.487129] usb usb4: SerialNumber: 0000:00:14.0
[ 0.487214] hub 4-0:1.0: USB hub found
[ 0.487221] hub 4-0:1.0: 6 ports detected
[ 0.493241] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.495519] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.495523] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.495644] mousedev: PS/2 mouse device common for all mice
[ 0.495794] rtc_cmos 00:05: RTC can wake from S4
[ 0.495882] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.495904] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.495939] device-mapper: uevent: version 1.0.3
[ 0.495986] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 0.495990] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.495991] EFI Variables Facility v0.08 2004-May-17
[ 0.498906] TCP: cubic registered
[ 0.498962] NET: Registered protocol family 10
[ 0.499077] NET: Registered protocol family 17
[ 0.499082] Key type dns_resolver registered
[ 0.499254] Loading compiled-in X.509 certificates
[ 0.499805] Loaded X.509 cert 'Magrathea: Glacier signing key: 6fca287c2573d09ca32c1980c0d763777a63d4f5'
[ 0.499811] registered taskstats version 1
[ 0.501405] Key type trusted registered
[ 0.503746] Key type encrypted registered
[ 0.503749] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.503750] IMA: No TPM chip found, activating TPM-bypass!
[ 0.504018] regulator-dummy: disabling
[ 0.504081] Magic number: 11:804:220
[ 0.504106] acpi device:3e: hash matches
[ 0.504118] dmi id: hash matches
[ 0.504122] memory memory102: hash matches
[ 0.504166] rtc_cmos 00:05: setting system clock to 2015-04-24 08:13:47 UTC (1429863227)
[ 0.504635] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.504636] EDD information not available.
[ 0.504662] PM: Hibernation image not present or could not be loaded.
[ 0.505210] Freeing unused kernel memory: 1340K (ffffffff81d20000 - ffffffff81e6f000)
[ 0.505211] Write protecting the kernel read-only data: 12288k
[ 0.506405] Freeing unused kernel memory: 796K (ffff880002739000 - ffff880002800000)
[ 0.507365] Freeing unused kernel memory: 688K (ffff880002b54000 - ffff880002c00000)
[ 0.514132] systemd-udevd[112]: starting version 204
[ 0.525438] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.525445] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 0.525795] ahci 0000:00:1f.2: version 3.0
[ 0.525861] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[ 0.525897] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0xb impl SATA mode
[ 0.525898] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
[ 0.533538] r8169 0000:03:00.0: irq 43 for MSI/MSI-X
[ 0.533655] r8169 0000:03:00.0 eth0: RTL8168g/8111g at 0xffffc900018b8000, 74:d0:2b:7d:11:39, XID 0c000800 IRQ 43
[ 0.533657] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 0.541510] scsi0 : ahci
[ 0.541590] scsi1 : ahci
[ 0.541661] scsi2 : ahci
[ 0.541730] scsi3 : ahci
[ 0.541803] scsi4 : ahci
[ 0.541852] scsi5 : ahci
[ 0.541875] ata1: SATA max UDMA/133 abar m2048@0xf2e1a000 port 0xf2e1a100 irq 42
[ 0.541876] ata2: SATA max UDMA/133 abar m2048@0xf2e1a000 port 0xf2e1a180 irq 42
[ 0.541877] ata3: DUMMY
[ 0.541879] ata4: SATA max UDMA/133 abar m2048@0xf2e1a000 port 0xf2e1a280 irq 42
[ 0.541879] ata5: DUMMY
[ 0.541880] ata6: DUMMY
[ 0.781196] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.861194] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.861209] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.861224] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.862255] ata1.00: ATA-8: Hitachi HDS5C3020BLE630, MZ4OAAB0, max UDMA/133
[ 0.862257] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.862390] ata4.00: ATAPI: HL-DT-ST DVDRAM GH24NSB0, LM01, max UDMA/133
[ 0.863441] ata1.00: configured for UDMA/133
[ 0.863551] scsi 0:0:0:0: Direct-Access ATA Hitachi HDS5C302 MZ4O PQ: 0 ANSI: 5
[ 0.863632] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 0.863634] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 0.863648] sd 0:0:0:0: [sda] Write Protect is off
[ 0.863650] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.863656] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.863657] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.863965] ata4.00: configured for UDMA/133
[ 0.879353] ata2.00: ATA-9: INTEL SSDSC2BW240A4, DC02, max UDMA/133
[ 0.879355] ata2.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.886521] sda: sda1
[ 0.886631] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.905698] ata2.00: configured for UDMA/133
[ 0.905792] scsi 1:0:0:0: Direct-Access ATA INTEL SSDSC2BW24 DC02 PQ: 0 ANSI: 5
[ 0.905869] sd 1:0:0:0: [sdb] 468862128 512-byte logical blocks: (240 GB/223 GiB)
[ 0.905889] sd 1:0:0:0: [sdb] Write Protect is off
[ 0.905890] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 0.905896] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.905912] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 0.906749] sdb: sdb1 sdb2 sdb3
[ 0.906832] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GH24NSB0 LM01 PQ: 0 ANSI: 5
[ 0.906958] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 0.910113] sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[ 0.910115] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 0.910200] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 0.910237] sr 3:0:0:0: Attached scsi generic sg2 type 5
[ 0.913565] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[ 0.913568] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 0.913701] hub 1-1:1.0: USB hub found
[ 0.913808] hub 1-1:1.0: 6 ports detected
[ 0.932848] EXT4-fs (sdb2): INFO: recovery required on readonly filesystem
[ 0.932850] EXT4-fs (sdb2): write access will be enabled during recovery
[ 0.961592] EXT4-fs (sdb2): orphan cleanup on readonly fs
[ 0.963776] EXT4-fs (sdb2): 3 orphan inodes deleted
[ 0.963778] EXT4-fs (sdb2): recovery complete
[ 1.018407] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[ 1.025196] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.126792] random: init urandom read with 62 bits of entropy available
[ 1.141533] init: plymouth-upstart-bridge main process (186) terminated with status 1
[ 1.141539] init: plymouth-upstart-bridge main process ended, respawning
[ 1.144834] init: plymouth-upstart-bridge main process (194) terminated with status 1
[ 1.144840] init: plymouth-upstart-bridge main process ended, respawning
[ 1.146456] init: plymouth-upstart-bridge main process (199) terminated with status 1
[ 1.146461] init: plymouth-upstart-bridge main process ended, respawning
[ 1.147773] init: plymouth-upstart-bridge main process (201) terminated with status 1
[ 1.147779] init: plymouth-upstart-bridge main process ended, respawning
[ 1.149061] init: plymouth-upstart-bridge main process (203) terminated with status 1
[ 1.149067] init: plymouth-upstart-bridge main process ended, respawning
[ 1.157557] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[ 1.157559] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.157697] hub 2-1:1.0: USB hub found
[ 1.157829] hub 2-1:1.0: 8 ports detected
[ 1.325210] usb 3-11: new low-speed USB device number 2 using xhci_hcd
[ 1.373247] usb 3-11: New USB device found, idVendor=040b, idProduct=2012
[ 1.373249] usb 3-11: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.373250] usb 3-11: Product: 2.4GHz Mouse
[ 1.373333] usb 3-11: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.373336] usb 3-11: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.409185] tsc: Refined TSC clocksource calibration: 3199.997 MHz
[ 1.485178] usb 3-13: new low-speed USB device number 3 using xhci_hcd
[ 1.506614] usb 3-13: New USB device found, idVendor=1d57, idProduct=ffa4
[ 1.506616] usb 3-13: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 1.506617] usb 3-13: Product: 2.4G Receiver
[ 1.506684] usb 3-13: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.506686] usb 3-13: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 2.404454] Adding 16450556k swap on /dev/sdb3. Priority:-1 extents:1 across:16450556k SSFS
[ 2.409156] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2.409534] Switched to clocksource tsc
[ 2.426095] systemd-udevd[318]: starting version 204
[ 2.441737] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro
[ 2.445136] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 2.446899] mei_me 0000:00:16.0: irq 44 for MSI/MSI-X
[ 2.451100] wmi: Mapper loaded
[ 2.453642] [drm] Initialized drm 1.1.0 20060810
[ 2.460215] lp: driver loaded but no devices found
[ 2.467136] ppdev: user-space parallel port driver
[ 2.477416] [drm] Memory usable by graphics device = 2048M
[ 2.482763] yenta_cardbus 0000:05:01.0: CardBus bridge found [0000:0000]
[ 2.482858] yenta_cardbus 0000:05:01.0: CardBus bridge to [bus 06-09]
[ 2.482859] yenta_cardbus 0000:05:01.0: bridge window [io 0xb000-0xb0ff]
[ 2.482864] yenta_cardbus 0000:05:01.0: bridge window [io 0xb400-0xb4ff]
[ 2.482868] yenta_cardbus 0000:05:01.0: bridge window [mem 0xf0400000-0xf2bfffff pref]
[ 2.482873] yenta_cardbus 0000:05:01.0: bridge window [mem 0xdf400000-0xdf7fffff]
[ 2.487112] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.497135] ISDN subsystem Rev: 1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 loaded
[ 2.500896] HiSax: Linux Driver for passive ISDN cards
[ 2.500897] HiSax: Version 3.5 (module)
[ 2.500898] HiSax: Layer1 Revision 2.46.2.5
[ 2.500899] HiSax: Layer2 Revision 2.30.2.4
[ 2.500900] HiSax: TeiMgr Revision 2.20.2.3
[ 2.500900] HiSax: Layer3 Revision 2.22.2.3
[ 2.500901] HiSax: LinkLayer Revision 2.59.2.4
[ 2.502389] random: nonblocking pool is initialized
[ 2.514831] type=1400 audit(1429863229.505:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=423 comm="apparmor_parser"
[ 2.514835] type=1400 audit(1429863229.505:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=423 comm="apparmor_parser"
[ 2.514837] type=1400 audit(1429863229.505:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=423 comm="apparmor_parser"
[ 2.515051] type=1400 audit(1429863229.505:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=423 comm="apparmor_parser"
[ 2.515053] type=1400 audit(1429863229.505:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=423 comm="apparmor_parser"
[ 2.515165] type=1400 audit(1429863229.505:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=423 comm="apparmor_parser"
[ 2.521194] usbcore: registered new interface driver usbhid
[ 2.521195] usbhid: USB HID core driver
[ 2.526518] i915 0000:00:02.0: irq 45 for MSI/MSI-X
[ 2.526525] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.526526] [drm] Driver supports precise vblank timestamp query.
[ 2.526573] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.546632] kvm: disabled by bios
[ 2.593551] Bluetooth: Core ver 2.17
[ 2.593560] NET: Registered protocol family 31
[ 2.593561] Bluetooth: HCI device and connection manager initialized
[ 2.593567] Bluetooth: HCI socket layer initialized
[ 2.593568] Bluetooth: L2CAP socket layer initialized
[ 2.593569] Bluetooth: SCO socket layer initialized
[ 2.601739] asus_wmi: ASUS WMI generic driver loaded
[ 2.602553] asus_wmi: Initialization: 0x0
[ 2.602565] asus_wmi: BIOS WMI version: 0.9
[ 2.602584] asus_wmi: SFUN value: 0x0
[ 2.602742] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input5
[ 2.604009] Bluetooth: RFCOMM TTY layer initialized
[ 2.604015] Bluetooth: RFCOMM socket layer initialized
[ 2.604019] Bluetooth: RFCOMM ver 1.11
[ 2.604717] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 2.604719] Bluetooth: BNEP filters: protocol multicast
[ 2.604722] Bluetooth: BNEP socket layer initialized
[ 2.604744] asus_wmi: Backlight controlled by ACPI video driver
[ 2.608029] type=1400 audit(1429863229.597:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=602 comm="apparmor_parser"
[ 2.608034] type=1400 audit(1429863229.597:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=602 comm="apparmor_parser"
[ 2.608244] type=1400 audit(1429863229.597:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=602 comm="apparmor_parser"
[ 2.608440] input: 2.4GHz Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-11/3-11:1.0/input/input6
[ 2.608570] hid-generic 0003:040B:2012.0001: input,hidraw0: USB HID v1.10 Keyboard [2.4GHz Mouse] on usb-0000:00:14.0-11/input0
[ 2.608703] input: 2.4GHz Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-11/3-11:1.1/input/input7
[ 2.608891] hid-generic 0003:040B:2012.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [2.4GHz Mouse] on usb-0000:00:14.0-11/input1
[ 2.610023] yenta_cardbus 0000:05:01.0: ISA IRQ mask 0x0000, PCI irq 16
[ 2.610027] yenta_cardbus 0000:05:01.0: Socket status: 30000006
[ 2.610028] pci_bus 0000:06: Upper limit for fixing this bridge's parent bridge: #06
[ 2.610209] yenta_cardbus 0000:05:01.0: pcmcia: parent PCI bridge window: [io 0xb000-0xdfff]
[ 2.610210] yenta_cardbus 0000:05:01.0: pcmcia: parent PCI bridge window: [mem 0xf0400000-0xf2cfffff]
[ 2.610483] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf0400000-0xf2cfffff:
[ 2.610486] excluding 0xf0400000-0xf2cfffff
[ 2.615595] input: 2.4G Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13:1.0/input/input8
[ 2.615670] hid-generic 0003:1D57:FFA4.0003: input,hiddev0,hidraw2: USB HID v1.10 Mouse [2.4G Receiver] on usb-0000:00:14.0-13/input0
[ 2.615747] input: 2.4G Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13:1.1/input/input9
[ 2.615772] hid-generic 0003:1D57:FFA4.0004: input,hidraw3: USB HID v1.10 Keyboard [2.4G Receiver] on usb-0000:00:14.0-13/input1
[ 2.617098] snd_vx222 0000:05:00.0: enabling device (0000 -> 0001)
[ 2.623346] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[ 2.623350] excluding 0xc0000-0xcffff 0xe0000-0xfffff
[ 2.623360] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[ 2.623364] excluding 0xa0000000-0xa0ffffff
[ 2.623369] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[ 2.623373] excluding 0x60000000-0x60ffffff
[ 2.636370] init: cups main process (606) killed by HUP signal
[ 2.636375] init: cups main process ended, respawning
[ 2.677211] init: failsafe main process (637) killed by TERM signal
[ 2.783302] r8169 0000:03:00.0 eth0: link down
[ 2.783320] r8169 0000:03:00.0 eth0: link down
[ 2.783342] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2.783478] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2.785021] fbcon: inteldrmfb (fb0) is primary device
[ 2.985238] Console: switching to colour frame buffer device 170x48
[ 2.987435] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.987436] i915 0000:00:02.0: registered panic notifier
[ 3.789294] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 3.826028] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 3.826244] acpi device:59: registered as cooling_device10
[ 3.826284] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input10
[ 3.829213] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 3.829253] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[ 3.829256] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.829258] ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
[ 3.829259] ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
[ 3.829261] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.829261] ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
[ 3.829262] ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
[ 3.829264] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.829264] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 3.829758] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
[ 3.829825] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[ 3.829862] HDA driver get symbol successfully from i915 module
[ 3.829882] snd_hda_intel 0000:00:03.0: irq 46 for MSI/MSI-X
[ 3.829949] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 3.840177] autoconfig: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line
[ 3.840179] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 3.840179] hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 3.840180] mono: mono_out=0x0
[ 3.840180] dig-out=0x5/0x7
[ 3.840181] inputs:
[ 3.840609] input: HDA Intel HDMI HDMI as /devices/pci0000:00/0000:00:03.0/sound/card1/input12
[ 3.840646] input: HDA Intel HDMI HDMI as /devices/pci0000:00/0000:00:03.0/sound/card1/input11
[ 3.842098] SKU: Nid=0x1d sku_cfg=0x4045e601
[ 3.842099] SKU: port_connectivity=0x1
[ 3.842100] SKU: enable_pcbeep=0x0
[ 3.842100] SKU: check_sum=0x00000005
[ 3.842101] SKU: customization=0x000000e6
[ 3.842101] SKU: external_amp=0x0
[ 3.842102] SKU: platform_type=0x0
[ 3.842102] SKU: swap=0x0
[ 3.842103] SKU: override=0x1
[ 3.842549] autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 3.842549] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 3.842550] hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 3.842551] mono: mono_out=0x0
[ 3.842551] dig-out=0x11/0x1e
[ 3.842552] inputs:
[ 3.842553] Front Mic=0x19
[ 3.842553] Rear Mic=0x18
[ 3.842554] Line=0x1a
[ 3.842555] realtek: No valid SSID, checking pincfg 0x4045e601 for NID 0x1d
[ 3.842556] realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0887
[ 3.853968] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card2/input20
[ 3.854032] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card2/input19
[ 3.854086] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card2/input18
[ 3.854130] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card2/input17
[ 3.854682] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card2/input16
[ 3.854731] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card2/input15
[ 3.854781] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card2/input14
[ 3.854824] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card2/input13
[ 4.413960] r8169 0000:03:00.0 eth0: link up
[ 4.413966] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 4.416835] init: plymouth-upstart-bridge main process ended, respawning
[ 4.419465] init: plymouth-upstart-bridge main process (1470) terminated with status 1
[ 4.419472] init: plymouth-upstart-bridge main process ended, respawning
[ 5.160160] transfer_end: error = 0xb1d
[ 5.162946] msg got error = 0xc00 at cmd[0]
[ 32.667783] audit_printk_skb: 180 callbacks suppressed
[ 32.667785] type=1400 audit(1429863259.671:71): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2721 comm="apparmor_parser"
[ 32.667788] type=1400 audit(1429863259.671:72): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2721 comm="apparmor_parser"
[ 32.667999] type=1400 audit(1429863259.671:73): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2721 comm="apparmor_parser"
Le retour de "sudo smartctl -a /dev/sda" me donne :
romainhelo@romainhelo-All-Series:~$ sudo smartctl -a /dev/sda
[sudo] password for romainhelo:
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-49-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Hitachi Deskstar 5K3000
Device Model: Hitachi HDS5C3020BLE630
Serial Number: MCE7215P0V0WHV
LU WWN Device Id: 5 000cca 37dcbd4fa
Firmware Version: MZ4OAAB0
User Capacity: 2 000 398 934 016 bytes [2,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5700 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Apr 24 10:48:22 2015 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (19061) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 318) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
2 Throughput_Performance 0x0005 143 143 054 Pre-fail Offline - 85
3 Spin_Up_Time 0x0007 150 150 024 Pre-fail Always - 221 (Average 243)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 1049
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 138 138 020 Pre-fail Offline - 33
9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 3269
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 1049
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 1052
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 1052
194 Temperature_Celsius 0x0002 206 206 000 Old_age Always - 29 (Min/Max 17/36)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Et pour /sdb :
romainhelo@romainhelo-All-Series:~$ sudo smartctl -a /dev/sdb
[sudo] password for romainhelo:
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-49-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: INTEL SSDSC2BW240A4
Serial Number: BTDA326302V42403GN
LU WWN Device Id: 5 001517 8f3658f2e
Firmware Version: DC02
User Capacity: 240 057 409 536 bytes [240 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Apr 24 10:44:50 2015 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x05) Offline data collection activity
was aborted by an interrupting command from host.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 33) The self-test routine was interrupted
by the host with a hard or soft reset.
Total time to complete Offline
data collection: ( 5860) seconds.
Offline data collection
capabilities: (0x7f) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Abort Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 48) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x0025) SCT Status supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
5 Reallocated_Sector_Ct 0x0032 100 100 000 Old_age Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 2676 (250 100 0)
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1063
170 Unknown_Attribute 0x0033 100 100 010 Pre-fail Always - 0
171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 33
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0033 100 100 090 Pre-fail Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0032 026 038 000 Old_age Always - 26 (Min/Max 17/38)
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 33
199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0
225 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always - 31189
226 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always - 65535
227 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always - 54
228 Power-off_Retract_Count 0x0032 100 100 000 Old_age Always - 65535
232 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0
233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 0
241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 31189
242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always - 37126
249 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 4337
SMART Error Log not supported
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Offline Interrupted (host reset) 10% 2676 -
# 2 Offline Interrupted (host reset) 10% 2675 -
# 3 Offline Interrupted (host reset) 10% 2674 -
# 4 Offline Interrupted (host reset) 10% 2674 -
# 5 Offline Interrupted (host reset) 10% 2674 -
# 6 Offline Interrupted (host reset) 10% 2674 -
# 7 Offline Interrupted (host reset) 10% 2674 -
# 8 Offline Interrupted (host reset) 10% 2674 -
# 9 Offline Interrupted (host reset) 10% 2674 -
#10 Offline Interrupted (host reset) 10% 2674 -
#11 Offline Interrupted (host reset) 10% 2673 -
#12 Offline Interrupted (host reset) 10% 2673 -
#13 Offline Interrupted (host reset) 10% 2673 -
#14 Offline Interrupted (host reset) 10% 2673 -
#15 Offline Interrupted (host reset) 10% 2673 -
#16 Offline Interrupted (host reset) 10% 2673 -
#17 Offline Interrupted (host reset) 10% 2673 -
#18 Offline Interrupted (host reset) 10% 2671 -
#19 Offline Interrupted (host reset) 10% 2670 -
#20 Offline Interrupted (host reset) 10% 2668 -
#21 Offline Interrupted (host reset) 10% 2666 -
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Merci.
Dernière modification par romrom78 (Le 24/04/2015, à 10:50)
Version actuelle : Ubuntu 20.04.1 LTS
Hors ligne
#6 Le 24/04/2015, à 10:59
- Bougron
Re : Réinstallation _ Ubuntu 14.04 LTS
La partie de boot proprement dite se passe très bien.
puisqu'elle est terminée après 33 secondes.
32.667999] type=1400 audit(1429863259.671:73): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2721 comm="apparmor_parser"
Le SSD va bien lui aussi.
AJOUT:: Ainsi que le SDA.....
C'est donc après la fin du boot qu'il y a un problème.......
Une chose qui n'a aucun rapport!:
Ton installation n'est pas équipée de windows et tu as un disque de 2TO formaté en NTFS, Comment vas-tu t'y prendre lorsqu'il y aura une mauvaise écriture et qu'il faudra réparer par la commande
sudo fsck /dev/sda1
Je te suggère de la faire maintenant pour voir la réponse qui sera donnée (au cas où le logiciel aurait évolué)
Dernière modification par Bougron (Le 24/04/2015, à 11:33)
Hors ligne
#7 Le 24/04/2015, à 11:00
- romrom78
Re : Réinstallation _ Ubuntu 14.04 LTS
Avant de décider de faire une réinstallation, il faut comprendre la cause, Par exemple si tu as un câble qui fait un faux-contact, la réinstallation ne changera rien et lorsque le faux contact sera réparé la réinstallation sera inutile.
Je crois que historiquement, le problème date d'un ensemble de manipulations de fichiers liés aux paramètres audio du système car j'avais une carte son qui n'a pas été reconnue et via les forum, on a tenté pas mal de choses ...
Je pense plus que le problème viens de là que d'une raison matérielle ... mais bon, je n'en suis pas certain !
Version actuelle : Ubuntu 20.04.1 LTS
Hors ligne
#8 Le 24/04/2015, à 11:02
- romrom78
Re : Réinstallation _ Ubuntu 14.04 LTS
C'est donc après la fin du boot qu'il y a un problème.......
Ah, ... comment procéder alors ?
Ce qui se passe lorsque je démarre le PC, c'est que souvent le système n'affiche qu'un écran soit noir, soit de la couleur violette d'Ubuntu.
Et rien d'autre ... je suis alors contraint d'éteindre le PC et de le redémarrer jusqu'à ce que le bureau s'affiche enfin ...
Dernière modification par romrom78 (Le 24/04/2015, à 11:09)
Version actuelle : Ubuntu 20.04.1 LTS
Hors ligne
#9 Le 24/04/2015, à 11:11
- romrom78
Re : Réinstallation _ Ubuntu 14.04 LTS
Euh ... oui, bonne question ...
sudo fsck /dev/sda1
romainhelo@romainhelo-All-Series:~$ sudo fsck /dev/sda1
[sudo] password for romainhelo:
fsck de util-linux 2.20.1
fsck: fsck.ntfs: not found
fsck: error 2 while executing fsck.ntfs for /dev/sda1
Dernière modification par romrom78 (Le 24/04/2015, à 11:14)
Version actuelle : Ubuntu 20.04.1 LTS
Hors ligne
#10 Le 24/04/2015, à 11:14
- Bougron
Re : Réinstallation _ Ubuntu 14.04 LTS
et cela je ne sais pas.
Remettre le logiciel propre pour éliminer les manipulations est effectivement probablement plus simple pour remettre à l'état initial
"soit de la couleur violette d'Ubuntu.
Et rien d'autre ... je suis alors contraint d'éteindre le PC et de le redémarrer jusqu'à ce que le bureau s'affiche enfin "...
Une piste ou un contournement
Voir s'il existe des pilotes propriétaires.... s'ils sont installés, en mettre d'autres, ou remettre le format libre
Une autre piste pour dépanner, Elle peut marcher ou pas
C'est installer l'option NOMODESET (installation réversible)
Comme ton micro boote le plus simple est de le faire avec la session du micro
Pour cela
sudo gedit /etc/default/grub
rechercher la ligne
GRUB_CMDLINE_LINUX_DEFAULT=
qui sera par exemple
GRUB_CMDLINE_LINUX_DEFAULT="paramètre1 paramètre2");
et ajouter l'option
GRUB_CMDLINE_LINUX_DEFAULT="paramètre1 paramètre2 nomodeset");
et sauver.
Puis faire prendre en compte par la commande
sudo update-grub
PS J'ai écris ces commandes sous windows, Je ne les ai donc pas vérifiées. Je pense qu'il n'y a pas d'erreur
Dernière modification par Bougron (Le 24/04/2015, à 11:34)
Hors ligne
#11 Le 24/04/2015, à 11:17
- romrom78
Re : Réinstallation _ Ubuntu 14.04 LTS
Pour sda, j'ai déjà corrigé. Ça devrait apparaître ...
Je te le redonne au cas où :
romainhelo@romainhelo-All-Series:~$ sudo smartctl -a /dev/sda
[sudo] password for romainhelo:
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-49-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Hitachi Deskstar 5K3000
Device Model: Hitachi HDS5C3020BLE630
Serial Number: MCE7215P0V0WHV
LU WWN Device Id: 5 000cca 37dcbd4fa
Firmware Version: MZ4OAAB0
User Capacity: 2 000 398 934 016 bytes [2,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5700 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Apr 24 11:17:16 2015 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (19061) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 318) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
2 Throughput_Performance 0x0005 143 143 054 Pre-fail Offline - 85
3 Spin_Up_Time 0x0007 150 150 024 Pre-fail Always - 221 (Average 243)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 1049
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 138 138 020 Pre-fail Offline - 33
9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 3269
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 1049
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 1052
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 1052
194 Temperature_Celsius 0x0002 206 206 000 Old_age Always - 29 (Min/Max 17/36)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Version actuelle : Ubuntu 20.04.1 LTS
Hors ligne
#12 Le 24/04/2015, à 12:04
- Bougron
Re : Réinstallation _ Ubuntu 14.04 LTS
Euh ... oui, bonne question ...
sudo fsck /dev/sda1
romainhelo@romainhelo-All-Series:~$ sudo fsck /dev/sda1 [sudo] password for romainhelo: fsck de util-linux 2.20.1 fsck: fsck.ntfs: not found fsck: error 2 while executing fsck.ntfs for /dev/sda1
Je ne sais pas ce que vaut cette solution
http://askubuntu.com/questions/86086/fs … -fsck-ntfs
Hors ligne