Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

Pages : 1

#1 Le 30/04/2015, à 02:50

palima

Impossibilité installation pilote Nvidia

Bonsoir,

Me voilà converti à la sphère du libre et d'ubuntu. Malheureusement, je dois avouer que j'en galère sur certains points. En voici un qui concerne l'ajout de drivers de carte graphique Nvidia Avant de commencer, si vous arrivez à résoudre mon problème (merci à vous si vous le faites !) , pourriez vous m'expliquer brièvement comment ça marche? J'ai l'impression d'appliquer des formules magiques tirées de Google ...

Tout d'abord, voici mes caractéristiques :
->Asus R751L - X750LN
   Ubuntu 14.04, 64 bits
   Intel(R) Core(TM) i7-4500U CPU @ 1.80GHz
   8 Gb de RAM

Puis mes deux cartes graphiques. Pour plus de précision, les informations ont été récupérées à l'aide de lshw -enable pci -class display

  *-display               
       description: VGA compatible controller
       produit: Haswell-ULT Integrated Graphics Controller
       fabriquant: Intel Corporation
       identifiant matériel: 2
       information bus: pci@0000:00:02.0
       version: 09
       bits: 64 bits
       horloge: 33MHz
       fonctionnalités: msi pm vga_controller bus_master cap_list rom
       configuration: driver=i915 latency=0
       ressources: irq:63 mémoire:f7400000-f77fffff mémoire:d0000000-dfffffff portE/S:f000(taille=64)
  *-display NON-RÉCLAMÉ
       description: 3D controller
       produit: GM108M [GeForce 840M]
       fabriquant: NVIDIA Corporation
       identifiant matériel: 0
       information bus: pci@0000:04:00.0
       version: a2
       bits: 64 bits
       horloge: 33MHz
       fonctionnalités: pm msi pciexpress cap_list
       configuration: latency=0
       ressources: mémoire:f6000000-f6ffffff mémoire:e0000000-efffffff mémoire:f0000000-f1ffffff portE/S:d000(taille=128) mémoire:f7000000-f707ffff

J'ai installé dans le temps le dépôt nvidia-settings pour pouvoir changer de carte graphique selon mes besoins. Malheureusement, lorsque je changeai de carte graphique (Intel -> Nvvidia) , le logiciel me déconnectait de ma session et restait sur la carte Intel.
De plus, en jouant un jeu (le principe de Talos), je me rend compte que l'ordinateur restait sur la carte Intel.

Je suis allé dans le gestionnaire de pilotes propriétaires (j'ai déjà du y aller pour activer le pilote propriétaire de ma carte Wifi) mais pas de trace de Nvidia.
J'ai vu sur ce site qu'il y a deux pilotes pour installer Nvidia :
- Nouveau, le libre : je suis allé sur le site, ai cloné le dépôt git dans le dossier /dev puisque c'est là-bas que se trouvent les drivers. J'ai exploré le dossier drm qu'il m'a crée,  lu le fichier README qui me demandait d'exécuter ./configure. Il n'y avait qu'un ./configure.ac (étrange comme extension, non ?) que je n'avais pas le droit d'exécuter (alors que j'étais en superutilisateur (sudo -s) . J'ai tenté de faire un make sur Makefile.am et Makefile0sources (de même étranges extensions) sans succès (pas de cible).
- le pilote propriétaire : Par le site de Nvidia : il m'envoie un .run que j'ai executé avec sh. Problème, il me demande de désactiver le serveur X. Et même en suivant ce que j'ai trouvé sur google "stop lightdm", ça ne change rien.
                                    Par le dépôt ubuntu : j'ai suivi 

sudo add-apt-repository ppa:xorg-edgers/ppa 
sudo apt-get update 
ubuntu-drivers devices  
sudo apt-get install nvidia-(numéro du pilote)

Le problème vient de la dernière ligne en tentant NVIDIA-Linux-x86_64-346.59 et toutes les variations possibles, il ne le reconnaît pas.

Il faut noter que Windows 8 est installé sur le même ordinateur et ne connaît pas de problèmes de carte graphique dont le problème vient très probablement des drivers.
Enfin, dans un sujet d'en-tête, on me demandait de donner le contenu des fichiers suivants:

/etc/X11/xorg.conf

  Mais malheureusement, j'ai ce message  :
  

root@basile-portable-X750LN:/# emacs /etc/X11/xorg.conf

  (emacs:21332): GLib-WARNING **: In call to g_spawn_sync(), exit status of a child process was requested but ECHILD was received by waitpid(). Most likely the process is ignoring   SIGCHLD, or some other thread is invoking waitpid() with a nonpositive first argument; either behavior can break applications that use g_spawn_sync either directly or indirectly.

/var/log/Xorg.0.log

que voici :

[ 27417.040] 
X.Org X Server 1.16.0
Release Date: 2014-07-16
[ 27417.040] X Protocol Version 11, Revision 0
[ 27417.040] Build Operating System: Linux 3.2.0-70-generic x86_64 Ubuntu
[ 27417.040] Current Operating System: Linux basile-portable-X750LN 3.16.0-34-generic #47~14.04.1-Ubuntu SMP Fri Apr 10 17:49:16 UTC 2015 x86_64
[ 27417.040] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-34-generic.efi.signed root=UUID=e3c65284-64f6-40d5-acf5-4c0e99b76f44 ro quiet splash vt.handoff=7
[ 27417.040] Build Date: 12 February 2015  11:11:26PM
[ 27417.040] xorg-server 2:1.16.0-1ubuntu1.2~trusty2 (For technical support please see http://www.ubuntu.com/support) 
[ 27417.040] Current version of pixman: 0.30.2
[ 27417.040] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[ 27417.040] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 27417.040] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Apr 30 01:21:01 2015
[ 27417.075] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 27417.084] (==) No Layout section.  Using the first Screen section.
[ 27417.084] (==) No screen section available. Using defaults.
[ 27417.084] (**) |-->Screen "Default Screen Section" (0)
[ 27417.084] (**) |   |-->Monitor "<default monitor>"
[ 27417.084] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[ 27417.084] (==) Automatically adding devices
[ 27417.084] (==) Automatically enabling devices
[ 27417.084] (==) Automatically adding GPU devices
[ 27417.108] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 27417.108] 	Entry deleted from font path.
[ 27417.108] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 27417.108] 	Entry deleted from font path.
[ 27417.108] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 27417.108] 	Entry deleted from font path.
[ 27417.108] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 27417.108] 	Entry deleted from font path.
[ 27417.108] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 27417.108] 	Entry deleted from font path.
[ 27417.108] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[ 27417.108] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 27417.108] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 27417.108] (II) Loader magic: 0x7f1ec2a24c80
[ 27417.108] (II) Module ABI versions:
[ 27417.108] 	X.Org ANSI C Emulation: 0.4
[ 27417.108] 	X.Org Video Driver: 18.0
[ 27417.108] 	X.Org XInput driver : 21.0
[ 27417.108] 	X.Org Server Extension : 8.0
[ 27417.108] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 27417.109] (--) PCI:*(0:0:2:0) 8086:0a16:1043:14fd rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[ 27417.109] (--) PCI: (0:4:0:0) 10de:1341:1043:14fd rev 162, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000d000/128, BIOS @ 0x????????/524288
[ 27417.109] (II) LoadModule: "glx"
[ 27417.207] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 27417.219] (II) Module glx: vendor="X.Org Foundation"
[ 27417.219] 	compiled for 1.16.0, module version = 1.0.0
[ 27417.219] 	ABI class: X.Org Server Extension, version 8.0
[ 27417.219] (==) AIGLX enabled
[ 27417.219] (==) Matched intel as autoconfigured driver 0
[ 27417.219] (==) Matched intel as autoconfigured driver 1
[ 27417.219] (==) Matched modesetting as autoconfigured driver 2
[ 27417.219] (==) Matched fbdev as autoconfigured driver 3
[ 27417.219] (==) Matched vesa as autoconfigured driver 4
[ 27417.219] (==) Assigned the driver to the xf86ConfigLayout
[ 27417.219] (II) LoadModule: "intel"
[ 27417.219] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 27417.235] (II) Module intel: vendor="X.Org Foundation"
[ 27417.235] 	compiled for 1.16.0, module version = 2.99.914
[ 27417.235] 	Module class: X.Org Video Driver
[ 27417.235] 	ABI class: X.Org Video Driver, version 18.0
[ 27417.235] (II) LoadModule: "modesetting"
[ 27417.235] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 27417.239] (II) Module modesetting: vendor="X.Org Foundation"
[ 27417.239] 	compiled for 1.16.0, module version = 0.9.0
[ 27417.239] 	Module class: X.Org Video Driver
[ 27417.239] 	ABI class: X.Org Video Driver, version 18.0
[ 27417.239] (II) LoadModule: "fbdev"
[ 27417.240] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 27417.245] (II) Module fbdev: vendor="X.Org Foundation"
[ 27417.245] 	compiled for 1.16.0, module version = 0.4.4
[ 27417.245] 	Module class: X.Org Video Driver
[ 27417.245] 	ABI class: X.Org Video Driver, version 18.0
[ 27417.245] (II) LoadModule: "vesa"
[ 27417.245] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 27417.255] (II) Module vesa: vendor="X.Org Foundation"
[ 27417.255] 	compiled for 1.16.0, module version = 2.3.3
[ 27417.255] 	Module class: X.Org Video Driver
[ 27417.255] 	ABI class: X.Org Video Driver, version 18.0
[ 27417.255] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 27417.255] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 27417.255] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 27417.255] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 27417.255] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 27417.255] (II) FBDEV: driver for framebuffer: fbdev
[ 27417.255] (II) VESA: driver for VESA chipsets: vesa
[ 27417.255] (++) using VT number 7

[ 27417.255] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20080730
[ 27417.255] (II) intel(0): SNA compiled: xserver-xorg-video-intel-lts-utopic 2:2.99.914-1~exp1ubuntu4.2~trusty1 (Maarten Lankhorst <maarten.lankhorst@ubuntu.com>)
[ 27417.255] (II) intel(0): SNA compiled for use with valgrind
[ 27417.255] (WW) Falling back to old probe method for modesetting
[ 27417.255] (WW) Falling back to old probe method for fbdev
[ 27417.255] (II) Loading sub module "fbdevhw"
[ 27417.255] (II) LoadModule: "fbdevhw"
[ 27417.256] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 27417.265] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 27417.265] 	compiled for 1.16.0, module version = 0.0.2
[ 27417.265] 	ABI class: X.Org Video Driver, version 18.0
[ 27417.265] (WW) Falling back to old probe method for vesa
[ 27417.265] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4400
[ 27417.265] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2
[ 27417.265] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[ 27417.265] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 27417.265] (==) intel(0): RGB weight 888
[ 27417.265] (==) intel(0): Default visual is TrueColor
[ 27417.266] (II) intel(0): Output eDP1 has no monitor section
[ 27417.266] (--) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[ 27417.266] (II) intel(0): Output HDMI1 has no monitor section
[ 27417.266] (II) intel(0): Output DP1 has no monitor section
[ 27417.266] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 27417.266] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 27417.266] (--) intel(0): Output eDP1 using initial mode 1600x900 on pipe 0
[ 27417.266] (==) intel(0): TearFree disabled
[ 27417.266] (==) intel(0): DPI set to (96, 96)
[ 27417.266] (II) Loading sub module "dri2"
[ 27417.266] (II) LoadModule: "dri2"
[ 27417.266] (II) Module "dri2" already built-in
[ 27417.266] (II) Loading sub module "present"
[ 27417.266] (II) LoadModule: "present"
[ 27417.266] (II) Module "present" already built-in
[ 27417.266] (II) UnloadModule: "modesetting"
[ 27417.266] (II) Unloading modesetting
[ 27417.266] (II) UnloadModule: "fbdev"
[ 27417.266] (II) Unloading fbdev
[ 27417.266] (II) UnloadSubModule: "fbdevhw"
[ 27417.266] (II) Unloading fbdevhw
[ 27417.266] (II) UnloadModule: "vesa"
[ 27417.266] (II) Unloading vesa
[ 27417.266] (==) Depth 24 pixmap format is 32 bpp
[ 27417.266] (II) intel(0): SNA initialized with Haswell (gen7.5, gt2) backend
[ 27417.266] (==) intel(0): Backing store enabled
[ 27417.266] (==) intel(0): Silken mouse enabled
[ 27417.266] (II) intel(0): HW Cursor enabled
[ 27417.266] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 27417.267] (==) intel(0): DPMS enabled
[ 27417.267] (II) intel(0): [DRI2] Setup complete
[ 27417.267] (II) intel(0): [DRI2]   DRI driver: i965
[ 27417.267] (II) intel(0): [DRI2]   VDPAU driver: i965
[ 27417.267] (II) intel(0): direct rendering: DRI2 enabled
[ 27417.267] (II) intel(0): hardware support for Present enabled
[ 27417.267] (==) intel(0): display hotplug detection enabled
[ 27417.267] (--) RandR disabled
[ 27417.280] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 27417.280] (II) AIGLX: enabled GLX_ARB_create_context
[ 27417.280] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 27417.280] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 27417.280] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 27417.280] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 27417.280] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 27417.280] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 27417.280] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 27417.280] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 27417.280] (II) AIGLX: Loaded and initialized i965
[ 27417.280] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 27417.281] (II) intel(0): switch to mode 1600x900@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 27417.296] (II) intel(0): Setting screen physical size to 423 x 238
[ 27417.375] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 27417.392] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 27417.392] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 27417.392] (II) LoadModule: "evdev"
[ 27417.392] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 27417.401] (II) Module evdev: vendor="X.Org Foundation"
[ 27417.401] 	compiled for 1.16.0, module version = 2.9.0
[ 27417.401] 	Module class: X.Org XInput Driver
[ 27417.401] 	ABI class: X.Org XInput driver, version 21.0
[ 27417.401] (II) Using input driver 'evdev' for 'Power Button'
[ 27417.401] (**) Power Button: always reports core events
[ 27417.401] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 27417.401] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 27417.401] (--) evdev: Power Button: Found keys
[ 27417.401] (II) evdev: Power Button: Configuring as keyboard
[ 27417.401] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 27417.401] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 27417.401] (**) Option "xkb_rules" "evdev"
[ 27417.401] (**) Option "xkb_model" "asus_laptop"
[ 27417.401] (**) Option "xkb_layout" "fr"
[ 27417.401] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 27417.411] (II) XKB: reuse xkmfile /var/lib/xkb/server-1D4A719EA6A79327AD7B748EB0D15754A40F96A1.xkm
[ 27417.425] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[ 27417.425] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 27417.425] (II) Using input driver 'evdev' for 'Video Bus'
[ 27417.425] (**) Video Bus: always reports core events
[ 27417.425] (**) evdev: Video Bus: Device: "/dev/input/event7"
[ 27417.425] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 27417.425] (--) evdev: Video Bus: Found keys
[ 27417.425] (II) evdev: Video Bus: Configuring as keyboard
[ 27417.425] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input8/event7"
[ 27417.425] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 27417.425] (**) Option "xkb_rules" "evdev"
[ 27417.425] (**) Option "xkb_model" "asus_laptop"
[ 27417.425] (**) Option "xkb_layout" "fr"
[ 27417.425] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 27417.426] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 27417.426] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 27417.426] (II) Using input driver 'evdev' for 'Video Bus'
[ 27417.426] (**) Video Bus: always reports core events
[ 27417.426] (**) evdev: Video Bus: Device: "/dev/input/event6"
[ 27417.426] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 27417.426] (--) evdev: Video Bus: Found keys
[ 27417.426] (II) evdev: Video Bus: Configuring as keyboard
[ 27417.426] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:07/LNXVIDEO:00/input/input7/event6"
[ 27417.426] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 27417.426] (**) Option "xkb_rules" "evdev"
[ 27417.426] (**) Option "xkb_model" "asus_laptop"
[ 27417.426] (**) Option "xkb_layout" "fr"
[ 27417.426] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 27417.426] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 27417.426] (II) No input driver specified, ignoring this device.
[ 27417.426] (II) This device may have been added with another device file.
[ 27417.426] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 27417.426] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 27417.426] (II) Using input driver 'evdev' for 'Sleep Button'
[ 27417.426] (**) Sleep Button: always reports core events
[ 27417.426] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[ 27417.426] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 27417.426] (--) evdev: Sleep Button: Found keys
[ 27417.426] (II) evdev: Sleep Button: Configuring as keyboard
[ 27417.426] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[ 27417.426] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 27417.426] (**) Option "xkb_rules" "evdev"
[ 27417.426] (**) Option "xkb_model" "asus_laptop"
[ 27417.426] (**) Option "xkb_layout" "fr"
[ 27417.426] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 27417.427] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event9)
[ 27417.427] (II) No input driver specified, ignoring this device.
[ 27417.427] (II) This device may have been added with another device file.
[ 27417.427] (II) config/udev: Adding input device PixArt USB Optical Mouse (/dev/input/event5)
[ 27417.427] (**) PixArt USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 27417.427] (II) Using input driver 'evdev' for 'PixArt USB Optical Mouse'
[ 27417.427] (**) PixArt USB Optical Mouse: always reports core events
[ 27417.427] (**) evdev: PixArt USB Optical Mouse: Device: "/dev/input/event5"
[ 27417.427] (--) evdev: PixArt USB Optical Mouse: Vendor 0x93a Product 0x2510
[ 27417.427] (--) evdev: PixArt USB Optical Mouse: Found 3 mouse buttons
[ 27417.427] (--) evdev: PixArt USB Optical Mouse: Found scroll wheel(s)
[ 27417.427] (--) evdev: PixArt USB Optical Mouse: Found relative axes
[ 27417.427] (--) evdev: PixArt USB Optical Mouse: Found x and y relative axes
[ 27417.427] (II) evdev: PixArt USB Optical Mouse: Configuring as mouse
[ 27417.427] (II) evdev: PixArt USB Optical Mouse: Adding scrollwheel support
[ 27417.427] (**) evdev: PixArt USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 27417.427] (**) evdev: PixArt USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 27417.427] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:093A:2510.0001/input/input6/event5"
[ 27417.427] (II) XINPUT: Adding extended input device "PixArt USB Optical Mouse" (type: MOUSE, id 10)
[ 27417.427] (II) evdev: PixArt USB Optical Mouse: initialized for relative axes.
[ 27417.427] (**) PixArt USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 27417.427] (**) PixArt USB Optical Mouse: (accel) acceleration profile 0
[ 27417.427] (**) PixArt USB Optical Mouse: (accel) acceleration factor: 2.000
[ 27417.427] (**) PixArt USB Optical Mouse: (accel) acceleration threshold: 4
[ 27417.427] (II) config/udev: Adding input device PixArt USB Optical Mouse (/dev/input/mouse1)
[ 27417.427] (II) No input driver specified, ignoring this device.
[ 27417.427] (II) This device may have been added with another device file.
[ 27417.427] (II) config/udev: Adding input device USB Camera (/dev/input/event12)
[ 27417.427] (**) USB Camera: Applying InputClass "evdev keyboard catchall"
[ 27417.427] (II) Using input driver 'evdev' for 'USB Camera'
[ 27417.427] (**) USB Camera: always reports core events
[ 27417.427] (**) evdev: USB Camera: Device: "/dev/input/event12"
[ 27417.427] (--) evdev: USB Camera: Vendor 0xbda Product 0x570c
[ 27417.427] (--) evdev: USB Camera: Found keys
[ 27417.427] (II) evdev: USB Camera: Configuring as keyboard
[ 27417.427] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.0/input/input13/event12"
[ 27417.427] (II) XINPUT: Adding extended input device "USB Camera" (type: KEYBOARD, id 11)
[ 27417.427] (**) Option "xkb_rules" "evdev"
[ 27417.427] (**) Option "xkb_model" "asus_laptop"
[ 27417.427] (**) Option "xkb_layout" "fr"
[ 27417.427] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 27417.428] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event10)
[ 27417.428] (II) No input driver specified, ignoring this device.
[ 27417.428] (II) This device may have been added with another device file.
[ 27417.428] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11)
[ 27417.428] (II) No input driver specified, ignoring this device.
[ 27417.428] (II) This device may have been added with another device file.
[ 27417.428] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event8)
[ 27417.428] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 27417.428] (II) Using input driver 'evdev' for 'Asus WMI hotkeys'
[ 27417.428] (**) Asus WMI hotkeys: always reports core events
[ 27417.428] (**) evdev: Asus WMI hotkeys: Device: "/dev/input/event8"
[ 27417.428] (--) evdev: Asus WMI hotkeys: Vendor 0 Product 0
[ 27417.428] (--) evdev: Asus WMI hotkeys: Found keys
[ 27417.428] (II) evdev: Asus WMI hotkeys: Configuring as keyboard
[ 27417.428] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input9/event8"
[ 27417.428] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 12)
[ 27417.428] (**) Option "xkb_rules" "evdev"
[ 27417.428] (**) Option "xkb_model" "asus_laptop"
[ 27417.428] (**) Option "xkb_layout" "fr"
[ 27417.428] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 27417.428] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 27417.428] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 27417.428] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 27417.428] (**) AT Translated Set 2 keyboard: always reports core events
[ 27417.428] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[ 27417.428] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 27417.428] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 27417.428] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 27417.428] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[ 27417.428] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[ 27417.428] (**) Option "xkb_rules" "evdev"
[ 27417.428] (**) Option "xkb_model" "asus_laptop"
[ 27417.428] (**) Option "xkb_layout" "fr"
[ 27417.428] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 27417.429] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event4)
[ 27417.429] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[ 27417.429] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[ 27417.429] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[ 27417.429] (II) LoadModule: "synaptics"
[ 27417.429] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 27417.442] (II) Module synaptics: vendor="X.Org Foundation"
[ 27417.442] 	compiled for 1.16.0, module version = 1.8.99
[ 27417.442] 	Module class: X.Org XInput Driver
[ 27417.442] 	ABI class: X.Org XInput driver, version 21.0
[ 27417.442] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[ 27417.442] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 27417.442] (**) Option "Device" "/dev/input/event4"
[ 27417.448] (II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property
[ 27417.448] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 3097 (res 31)
[ 27417.448] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 2119 (res 32)
[ 27417.448] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[ 27417.448] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[ 27417.448] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left double triple
[ 27417.448] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[ 27417.448] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 27417.448] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 27417.448] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 27417.460] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event4"
[ 27417.460] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 14)
[ 27417.460] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 27417.460] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[ 27417.460] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.053
[ 27417.460] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[ 27417.460] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[ 27417.460] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 27417.460] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 27417.460] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 27417.460] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[ 27417.460] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 27421.340] (II) intel(0): EDID vendor "CMN", prod id 5928
[ 27421.340] (II) intel(0): Printing DDC gathered Modelines:
[ 27421.340] (II) intel(0): Modeline "1600x900"x0.0  107.80  1600 1648 1680 1940  900 903 908 926 +hsync -vsync (55.6 kHz eP)
[ 27431.328] (II) XKB: reuse xkmfile /var/lib/xkb/server-69864D634BD3E9BD340660608DB1C1204D0CCE59.xkm
[ 27432.810] (II) XKB: reuse xkmfile /var/lib/xkb/server-D378AD8F86E560F712A83EE36E4E5E92C595B9BD.xkm
[ 27433.133] (II) XKB: reuse xkmfile /var/lib/xkb/server-5CFE0C161055A9D1559C01D0C549748583EBDAFB.xkm
[ 27433.167] (II) XKB: reuse xkmfile /var/lib/xkb/server-5CFE0C161055A9D1559C01D0C549748583EBDAFB.xkm
[ 27436.958] (II) XKB: reuse xkmfile /var/lib/xkb/server-C9347D4E5D9506E4D567E89E176C4AA41DBAB393.xkm
[ 27865.721] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 28098.255] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 28098.255] (II) intel(0): switch to mode 1600x900@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 28098.271] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 28098.327] (II) XKB: reuse xkmfile /var/lib/xkb/server-5CFE0C161055A9D1559C01D0C549748583EBDAFB.xkm
[ 28098.335] (II) XKB: reuse xkmfile /var/lib/xkb/server-5CFE0C161055A9D1559C01D0C549748583EBDAFB.xkm
[ 28098.341] (II) XKB: reuse xkmfile /var/lib/xkb/server-5CFE0C161055A9D1559C01D0C549748583EBDAFB.xkm
[ 28098.350] (II) XKB: reuse xkmfile /var/lib/xkb/server-5CFE0C161055A9D1559C01D0C549748583EBDAFB.xkm
[ 28098.360] (II) XKB: reuse xkmfile /var/lib/xkb/server-5CFE0C161055A9D1559C01D0C549748583EBDAFB.xkm
[ 28098.367] (II) XKB: reuse xkmfile /var/lib/xkb/server-5CFE0C161055A9D1559C01D0C549748583EBDAFB.xkm
[ 28098.376] (II) XKB: reuse xkmfile /var/lib/xkb/server-5CFE0C161055A9D1559C01D0C549748583EBDAFB.xkm
[ 28101.080] (EE) intel(0): page flipping failed, on CRTC:5 (pipe=0), disabling synchronous page flips

Merci !

Hors ligne

#2 Le 01/05/2015, à 13:34

P'titTux

Re : Impossibilité installation pilote Nvidia

Le problème vient de la dernière ligne en tentant NVIDIA-Linux-x86_64-346.59 et toutes les variations possibles, il ne le reconnaît pas.

Salut, j'ai l'impression que tu fais une confusion le code exact est:

sudo add-apt-repository ppa:xorg-edgers/ppa 
sudo apt-get update 
sudo apt-get install nvidia-346

Autre chose, le fait de devoir jongler entre deux cartes graphiques est toujours une vraie plaie, c'est pourquoi je conseille fortement l'utilisation de Bumblebee.

En gros, par défaut tout ton système tournera sur sur la puce graphique Intel mais Bumblebee pourra te permettre de lancer à la carte tes applications sur le gpu Nvidia.

Va voir ici: http://askubuntu.com/questions/452556/h … e-in-14-04

Ou ici: http://doc.ubuntu-fr.org/bumblebee

Ayant une configuration assez similaire à la tienne, c'est la meilleur chose que je puisse te conseiller.

Si t'as des questions n'hésite pas!

EDIT: Effectivement, Gaara, c'était un copier/collé qui est parti en cacahuètes. Merci  pour la correction.

Dernière modification par P'titTux (Le 01/05/2015, à 14:24)

Hors ligne

#3 Le 01/05/2015, à 13:42

Gaara

Re : Impossibilité installation pilote Nvidia

Non, pour installer un driver du ppa edgers, c'est bien

sudo apt-get install nvidia-(numéro du pilote)

exemple:

sudo apt-get install nvidia-346

N'oublie pas de faire aussi

sudo apt-get upgrade

Edit:

il me demande de désactiver le serveur X.

sudo /etc/init.d/lightdm stop

ou

sudo /etc/init.d/gdm stop

Selon si tu utilises lightdm ou gdm.
N'oublies pas d'installer bumblebee.

Dernière modification par Gaara (Le 01/05/2015, à 13:58)

Kubuntu 18.04 x64
Un terminal tactile Raspberry Pi et Odroid

                                        <code>zenity  --question --title "Alert"  --text "Microsoft Windows has been found! Would you like to remove it?"</code>

Hors ligne

#4 Le 02/05/2015, à 12:19

palima

Re : Impossibilité installation pilote Nvidia

Merci pour vos réponses que j'ai suivies.

Voilà où j'en suis à présent : j'ai pu installer le pilote nvidia propriétaire.
J'ai pu installer bumblebee. Mais il y a un problème lors du test (recommandé dans la documentation : http://doc.ubuntu-fr.org/bumblebee#installation) glxspheres qui est le suivant : 

root@basile-portable-X750LN:~# optirun /opt/VirtualGL/bin/glxspheres64 
[ 2038.824736] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) [drm] KMS not enabled

[ 2038.824759] [ERROR]Aborting because fallback start is disabled.

(glxspheres sans optirun fonctionne très bien)

En tout cas, une fois que le pilote a été installé, j'ai pu utiliser le "quick switch graphic card" de prime indicator. Mais il avait beau d'annoncer que c'était la carte Nvidia qui était utilisée, l'appel à lspci ou le fait de jouer à mon jeu prouvait que c'était la carte Intel. J'ai ensuite supprimé nvidia-settings et prime-indicator pour éviter les conflits avec bumblebee mais j'ai toujours le même problème.

Hors ligne

#5 Le 04/05/2015, à 21:21

palima

Re : Impossibilité installation pilote Nvidia

J'ai réussi à installer le pilote Nouveau (j'ai découvert un "pilotes additionnels" sous interface graphique) mais le problème reste le même.
Et même en désinstallant tout puis en réinstallant avec un redémarrage entre chaque installation, toujours le même problème ...

Hors ligne

Pages : 1