#1 Le 22/06/2015, à 20:37
- briciou62500
Ubuntu ne démmare pas en dualboot avec Windows 8
Bonjour,
Aprer avoir installer ubuntu en dual boot avec windows 8, windows 8 démarre mais ubuntu ne démarre pas 
voici une photo de mon problème :
Que faire ??
Cordialement
Dernière modification par briciou62500 (Le 22/06/2015, à 20:38)
Hors ligne
#2 Le 23/06/2015, à 04:53
- AlexandreP
Re : Ubuntu ne démmare pas en dualboot avec Windows 8
Bonjour,
Quelle procédure as-tu suivie pour installer Ubuntu?
Bonne journée!
«La capacité d'apprendre est un don; La faculté d'apprendre est un talent; La volonté d'apprendre est un choix.» -Frank Herbert
93,8% des gens sont capables d'inventer des statistiques sans fournir d'études à l'appui.
Hors ligne
#3 Le 23/06/2015, à 07:44
- malbo
Re : Ubuntu ne démmare pas en dualboot avec Windows 8
Je te prie de faire un Boot-Info (ordi démarré sur un support live* de Ubuntu) et de donner l'URL de ce Boot-Info dans ta réponse.
D'autre part, ce serait utile de donner le nom complet du modèle de ton ordi et son fabricant.
* si tu as installé Ubuntu avec un support live (LiveDVD ou LiveUSB), je te prie d'utiliser ce même support live pour faire le Boot-Info demandé.
Dernière modification par malbo (Le 23/06/2015, à 07:46)
Hors ligne
#4 Le 23/06/2015, à 13:51
- briciou62500
Re : Ubuntu ne démmare pas en dualboot avec Windows 8
Bonjour,
Merci beaucoup pour vos réponses, je test tout ça et je vous dit quoi 
cordialement,
Hors ligne
#5 Le 23/06/2015, à 14:25
- briciou62500
Re : Ubuntu ne démmare pas en dualboot avec Windows 8
Re bonjour,
Voici l'url de mon boot-info : http://paste.ubuntu.com/11761910/
Pour la config du pc c'est un pc monter quel pièce voulez vous connaître?
encore merci de votre aide.
Hors ligne
#6 Le 23/06/2015, à 14:40
- Romuald-25
Re : Ubuntu ne démmare pas en dualboot avec Windows 8
Bonjour à tous,
Briciou62500, tu peux aller faire un tour sur la doc mais évidemment si tu l'as déjà épluché et que tu demandes de l'aide, c'est ce qu'il faut faire.
Je ne suis pas expert des boot-info, mais je peux cependant remarquer que tu as 2 partitions ext4 (sda3 et 4), ce qui me paraît étrange. As-tu réinstallé Ubuntu sur une nouvelle partition ? As-tu séparé certaines partitions (/home, / ... ) ?
Hors ligne
#7 Le 23/06/2015, à 14:47
- briciou62500
Re : Ubuntu ne démmare pas en dualboot avec Windows 8
Bonjour,
Se que je trouve étrange c'est belle est bien les partitions ext4 (sda3 et 4) car sur mais ntfs il y a marqué No errors found mais pas dans mais partition ext4, sd3 était pour installer ubuntu et sd4 était une partition pour stocker des données. sd3 et 4 sont belle et bien de nouvelle partitions créer avec ubuntu et non je n'ai pas séparer de partition tels que /home ...
cordialement,
Hors ligne
#8 Le 23/06/2015, à 14:53
- Romuald-25
Re : Ubuntu ne démmare pas en dualboot avec Windows 8
Alors je ne vois pas trop... essaie, puisque sda4 est vide et "morte", de la formater ou de la transformer en espace libre depuis un liveCD/USB... mais ça ne résoudra pas ton problème.
Personnellement, et par expérience (eh oui j'en ai quand-même fait pas mal des installs ) je n'irais pas chercher trop loin... ton ubuntu est, même s'il ne démarre pas, complètement vierge dans la mesure où tu viens de l'installer. Tu n'as donc rien à perdre en supprimant sda3 et sda4, puis en réessayant d'installer ubuntu sur une nouvelle partion ext4 occupant la place des 2 anciennes. Si le problème persiste, renvoie-nous un boot-info.
Dernière modification par Romuald-25 (Le 23/06/2015, à 14:54)
Hors ligne
#9 Le 23/06/2015, à 15:05
- briciou62500
Re : Ubuntu ne démmare pas en dualboot avec Windows 8
Merci beaucoup je réessayerait après et je vous dit quoi 
Hors ligne
#10 Le 23/06/2015, à 15:29
- malbo
Re : Ubuntu ne démmare pas en dualboot avec Windows 8
Ton Boot-Info dont tu as donné le lien dans le post #5 :
Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 9Feb2015]
============================= Boot Info Summary: ===============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos3)/boot/grub.
=> Syslinux MBR (3.61-4.03) is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /bootmgr /Boot/BCD
sda2: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 8
Boot files: /bootmgr /Windows/System32/winload.exe
sda3: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 14.04.2 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/grub/i386-pc/core.img
sda4: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sdb1: __________________________________________________________________________
File system: vfat
Boot sector type: SYSLINUX 4.03 2010-10-22 ........>..sr>........m.9...0...~.....~...f...M.f.f....f..0~....>E}.u......
Boot sector info: Syslinux looks at sector 1346880 of /dev/sdb1 for its
second stage. SYSLINUX is installed in the directory.
No errors found in the Boot Parameter Block.
Operating System:
Boot files: /boot/grub/grub.cfg /syslinux.cfg /casper/vmlinuz.efi
/EFI/BOOT/grubx64.efi /ldlinux.sys
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 320.1 GB, 320072933376 bytes
17 heads, 18 sectors/track, 2042949 cylinders, total 625142448 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 718,847 716,800 7 NTFS / exFAT / HPFS
/dev/sda2 718,848 293,687,597 292,968,750 7 NTFS / exFAT / HPFS
/dev/sda3 293,689,344 313,219,071 19,529,728 83 Linux
/dev/sda4 313,219,072 625,141,759 311,922,688 83 Linux
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 16.0 GB, 16025387008 bytes
255 heads, 63 sectors/track, 1948 cylinders, total 31299584 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 63 31,299,583 31,299,521 c W95 FAT32 (LBA)
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 BACAE82FCAE7E59B ntfs Réservé au système
/dev/sda2 902214E42214D158 ntfs
/dev/sda3 0a749efe-4c9d-443f-a4f9-ab71c98ae106 ext4
/dev/sda4 8ec923b7-d9dc-4b7c-beed-31ccbca0059f ext4
/dev/sdb1 B032-B9D6 vfat
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Jun 23 12:21 ata-MAXTOR_STM3320820AS_6QF2HGTW -> ../../sda
lrwxrwxrwx 1 root root 10 Jun 23 12:21 ata-MAXTOR_STM3320820AS_6QF2HGTW-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Jun 23 12:21 ata-MAXTOR_STM3320820AS_6QF2HGTW-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Jun 23 2015 ata-MAXTOR_STM3320820AS_6QF2HGTW-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Jun 23 2015 ata-MAXTOR_STM3320820AS_6QF2HGTW-part4 -> ../../sda4
lrwxrwxrwx 1 root root 9 Jun 23 2015 ata-Optiarc_DVD_RW_AD-7170S -> ../../sr0
lrwxrwxrwx 1 root root 9 Jun 23 2015 ata-SONY_DVD-ROM_DDU1615S -> ../../sr1
lrwxrwxrwx 1 root root 9 Jun 23 12:21 usb-General_USB_Flash_Disk_01210000000499C1-0:0 -> ../../sdb
lrwxrwxrwx 1 root root 10 Jun 23 2015 usb-General_USB_Flash_Disk_01210000000499C1-0:0-part1 -> ../../sdb1
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sdb1 /cdrom vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
=========================== sda3/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3 0a749efe-4c9d-443f-a4f9-ab71c98ae106
else
search --no-floppy --fs-uuid --set=root 0a749efe-4c9d-443f-a4f9-ab71c98ae106
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=-1
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=10
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=10
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-0a749efe-4c9d-443f-a4f9-ab71c98ae106' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3 0a749efe-4c9d-443f-a4f9-ab71c98ae106
else
search --no-floppy --fs-uuid --set=root 0a749efe-4c9d-443f-a4f9-ab71c98ae106
fi
linux /boot/vmlinuz-3.16.0-30-generic root=UUID=0a749efe-4c9d-443f-a4f9-ab71c98ae106 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.16.0-30-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-0a749efe-4c9d-443f-a4f9-ab71c98ae106' {
menuentry 'Ubuntu, avec Linux 3.16.0-30-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.16.0-30-generic-advanced-0a749efe-4c9d-443f-a4f9-ab71c98ae106' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3 0a749efe-4c9d-443f-a4f9-ab71c98ae106
else
search --no-floppy --fs-uuid --set=root 0a749efe-4c9d-443f-a4f9-ab71c98ae106
fi
echo 'Chargement de Linux 3.16.0-30-generic…'
linux /boot/vmlinuz-3.16.0-30-generic root=UUID=0a749efe-4c9d-443f-a4f9-ab71c98ae106 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.16.0-30-generic
}
menuentry 'Ubuntu, with Linux 3.16.0-30-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.16.0-30-generic-recovery-0a749efe-4c9d-443f-a4f9-ab71c98ae106' {
recordfail
load_video
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3 0a749efe-4c9d-443f-a4f9-ab71c98ae106
else
search --no-floppy --fs-uuid --set=root 0a749efe-4c9d-443f-a4f9-ab71c98ae106
fi
echo 'Chargement de Linux 3.16.0-30-generic…'
linux /boot/vmlinuz-3.16.0-30-generic root=UUID=0a749efe-4c9d-443f-a4f9-ab71c98ae106 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.16.0-30-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3 0a749efe-4c9d-443f-a4f9-ab71c98ae106
else
search --no-floppy --fs-uuid --set=root 0a749efe-4c9d-443f-a4f9-ab71c98ae106
fi
knetbsd /boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3 0a749efe-4c9d-443f-a4f9-ab71c98ae106
else
search --no-floppy --fs-uuid --set=root 0a749efe-4c9d-443f-a4f9-ab71c98ae106
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows 8 (loader) (sur /dev/sda1)' --class windows --class os $menuentry_id_option 'osprober-chain-BACAE82FCAE7E59B' {
insmod part_msdos
insmod ntfs
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 BACAE82FCAE7E59B
else
search --no-floppy --fs-uuid --set=root BACAE82FCAE7E59B
fi
parttool ${root} hidden-
drivemap -s (hd0) ${root}
chainloader +1
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
set timeout=10
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda3/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda3 during installation
UUID=0a749efe-4c9d-443f-a4f9-ab71c98ae106 / ext4 errors=remount-ro 0 1
# /home was on /dev/sda4 during installation
UUID=8ec923b7-d9dc-4b7c-beed-31ccbca0059f /home ext4 defaults 0 2
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
--------------------------------------------------------------------------------
=========================== sdb1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
if loadfont /boot/grub/font.pf2 ; then
set gfxmode=auto
insmod efi_gop
insmod efi_uga
insmod gfxterm
terminal_output gfxterm
fi
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
menuentry "Try Ubuntu without installing" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
initrd /casper/initrd.lz
}
menuentry "Install Ubuntu" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash --
initrd /casper/initrd.lz
}
menuentry "OEM install (for manufacturers)" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true --
initrd /casper/initrd.lz
}
menuentry "Check disc for defects" {
set gfxpayload=keep
linux /casper/vmlinuz.efi boot=casper integrity-check quiet splash --
initrd /casper/initrd.lz
}
--------------------------------------------------------------------------------
============================== sdb1/syslinux.cfg: ==============================
--------------------------------------------------------------------------------
default menu.c32
prompt 0
menu title UNetbootin
timeout 100
label unetbootindefault
menu label Default
kernel /ubnkern
append initrd=/ubninit file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
label ubnentry0
menu label ^Help
kernel /ubnkern
append initrd=/ubninit
label ubnentry1
menu label ^Try Ubuntu without installing
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
label ubnentry2
menu label ^Install Ubuntu
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash --
label ubnentry3
menu label ^Check disc for defects
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz boot=casper integrity-check quiet splash --
label ubnentry4
menu label Test ^memory
kernel /install/mt86plus
append initrd=/ubninit
label ubnentry5
menu label ^Boot from first hard disk
kernel /ubnkern
append initrd=/ubninit
label ubnentry6
menu label Try Ubuntu without installing
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
label ubnentry7
menu label Install Ubuntu
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash --
label ubnentry8
menu label OEM install (for manufacturers)
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true --
label ubnentry9
menu label Check disc for defects
kernel /casper/vmlinuz.efi
append initrd=/casper/initrd.lz boot=casper integrity-check quiet splash --
--------------------------------------------------------------------------------
============== sdb1: Version of COM32(R) files used by Syslinux: ===============
menu.c32 : COM32R module (v4.xx)
=============================== StdErr Messages: ===============================
cat: write error: Broken pipe
File descriptor 9 (/proc/4970/mounts) leaked on lvs invocation. Parent PID 12442: bash
File descriptor 63 (pipe:[83116]) leaked on lvs invocation. Parent PID 12442: bash
No volume groups found
ADDITIONAL INFORMATION :
=================== log of boot-info 2015-06-23__12h21 ===================
boot-info version : 4ppa33
boot-sav version : 4ppa33
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 4ppa33
boot-info is executed in live-session (Ubuntu 14.04.2 LTS, trusty, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
initrd=/casper/initrd.lz file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash -- BOOT_IMAGE=/casper/vmlinuz.efi
ls: cannot access /home/usr/.config: No such file or directory
=================== os-prober:
/dev/sda1:Windows 8 (loader):Windows:chain
/dev/sda3:Ubuntu 14.04.2 LTS (14.04):Ubuntu:linux
=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/sda1: LABEL="RM-CM-)servM-CM-) au systM-CM-(me" UUID="BACAE82FCAE7E59B" TYPE="ntfs"
/dev/sda2: UUID="902214E42214D158" TYPE="ntfs"
/dev/sda3: UUID="0a749efe-4c9d-443f-a4f9-ab71c98ae106" TYPE="ext4"
/dev/sda4: UUID="8ec923b7-d9dc-4b7c-beed-31ccbca0059f" TYPE="ext4"
/dev/sdb1: UUID="B032-B9D6" TYPE="vfat"
1 disks with OS, 2 OS : 1 Linux, 0 MacOS, 1 Windows, 0 unknown type OS.
Windows not detected by os-prober on sda2.
=================== sda3/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 Feb 18 19:38 grub.d
total 76
-rwxr-xr-x 1 root root 9424 May 15 2014 00_header
-rwxr-xr-x 1 root root 6058 May 8 2014 05_debian_theme
-rwxr-xr-x 1 root root 11608 May 15 2014 10_linux
-rwxr-xr-x 1 root root 10412 May 15 2014 20_linux_xen
-rwxr-xr-x 1 root root 1992 Mar 12 2014 20_memtest86+
-rwxr-xr-x 1 root root 11692 May 15 2014 30_os-prober
-rwxr-xr-x 1 root root 1416 May 15 2014 30_uefi-firmware
-rwxr-xr-x 1 root root 214 May 15 2014 40_custom
-rwxr-xr-x 1 root root 216 May 15 2014 41_custom
-rw-r--r-- 1 root root 483 May 15 2014 README
=================== sda3/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
=================== sda3recordfail=1/grub/grubenv :
recordfail=1
=================== UEFI/Legacy mode:
This live-session is not in EFI-mode.
SecureBoot maybe enabled.
=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, bootmgr, is-winboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda1.
sda2 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, bootmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda2.
sda3 : sda, not-sepboot, grubenv-ng grub2, grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, /mnt/boot-sav/sda3.
sda4 : sda, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda4.
sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 2048 sectors * 512 bytes
=================== parted -l:
Model: ATA MAXTOR STM332082 (scsi)
Disk /dev/sda: 320GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 368MB 367MB primary ntfs boot
2 368MB 150GB 150GB primary ntfs
3 150GB 160GB 9999MB primary ext4
4 160GB 320GB 160GB primary ext4
Model: General USB Flash Disk (scsi)
Disk /dev/sdb: 16.0GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 32.3kB 16.0GB 16.0GB primary fat32 boot, lba
=================== parted -lm:
BYT;
/dev/sda:320GB:scsi:512:512:msdos:ATA MAXTOR STM332082;
1:1049kB:368MB:367MB:ntfs::boot;
2:368MB:150GB:150GB:ntfs::;
3:150GB:160GB:9999MB:ext4::;
4:160GB:320GB:160GB:ext4::;
BYT;
/dev/sdb:16.0GB:scsi:512:512:msdos:General USB Flash Disk;
1:32.3kB:16.0GB:16.0GB:fat32::boot, lba;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL MODEL UUID
sda disk 298.1G MAXTOR S
sda1 part ntfs 350M Réservé au système
BACAE82FCAE7E59B
sda2 part ntfs 139.7G 902214E42214D158
sda3 part ext4 9.3G 0a749efe-4c9d-443f-a4f9-ab71c98ae106
sda4 part ext4 148.8G 8ec923b7-d9dc-4b7c-beed-31ccbca0059f
sdb disk 14.9G USB Flas
sdb1 part vfat 14.9G B032-B9D6
sr0 rom 1024M DVD RW A
sr1 rom 1024M DVD-ROM
loop0 loop squashfs 953M
KNAME ROTA RO RM STATE MOUNTPOINT
sda 1 0 0 running
sda1 1 0 0 /mnt/boot-sav/sda1
sda2 1 0 0 /mnt/boot-sav/sda2
sda3 1 0 0 /mnt/boot-sav/sda3
sda4 1 0 0 /mnt/boot-sav/sda4
sdb 1 0 1 running
sdb1 1 0 1 /cdrom
sr0 1 0 1 running
sr1 1 0 1 running
loop0 1 1 0 /rofs
=================== mount:
/cow on / type overlayfs (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sdb1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=ubuntu)
/dev/sda1 on /mnt/boot-sav/sda1 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda2 on /mnt/boot-sav/sda2 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda3 on /mnt/boot-sav/sda3 type ext4 (rw)
/dev/sda4 on /mnt/boot-sav/sda4 type ext4 (rw)
=================== ls:
/sys/block/fd0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 sda4 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sr1 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus cdrom char console core cpu_dma_latency cuse disk dri ecryptfs fb0 fd fd0 full fuse hpet input kmsg kvm log lp0 mapper mcelog mem net network_latency network_throughput null parport0 port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda4 sdb sdb1 sg0 sg1 sg2 sg3 shm snapshot snd sr0 sr1 stderr stdin stdout uhid uinput urandom vfio vga_arbiter vhci vhost-net zero
ls /dev/mapper: control
=================== hexdump -n512 -C /dev/sda1
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 12 00 11 00 00 08 00 00 |................|
00000020 00 00 00 00 80 00 80 00 ff ef 0a 00 00 00 00 00 |................|
00000030 aa 74 00 00 00 00 00 00 02 00 00 00 00 00 00 00 |.t..............|
00000040 f6 00 00 00 01 00 00 00 9b e5 e7 ca 2f e8 ca ba |............/...|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 52 11 16 68 09 00 66 53 66 53 66 |h...hR..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 0a 13 b9 f6 0c fc f3 aa e9 fe 01 90 90 66 60 1e |.............f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a1 f6 01 e8 09 00 |...u...fa.......|
00000170 a1 fa 01 e8 03 00 f4 eb fd 8b f0 ac 3c 00 74 09 |............<.t.|
00000180 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 64 69 |............A di|
00000190 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 6f 63 |sk read error oc|
000001a0 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d 47 52 |curred...BOOTMGR|
000001b0 20 69 73 20 63 6f 6d 70 72 65 73 73 65 64 00 0d | is compressed..|
000001c0 0a 50 72 65 73 73 20 43 74 72 6c 2b 41 6c 74 2b |.Press Ctrl+Alt+|
000001d0 44 65 6c 20 74 6f 20 72 65 73 74 61 72 74 0d 0a |Del to restart..|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 8a 01 a7 01 bf 01 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/sda2
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 12 00 11 00 00 f8 0a 00 |................|
00000020 00 00 00 00 80 00 80 00 20 59 76 11 00 00 00 00 |........ Yv.....|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 58 d1 14 22 e4 14 22 90 |........X.."..".|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 52 11 16 68 09 00 66 53 66 53 66 |h...hR..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 0a 13 b9 f6 0c fc f3 aa e9 fe 01 90 90 66 60 1e |.............f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a1 f6 01 e8 09 00 |...u...fa.......|
00000170 a1 fa 01 e8 03 00 f4 eb fd 8b f0 ac 3c 00 74 09 |............<.t.|
00000180 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 64 69 |............A di|
00000190 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 6f 63 |sk read error oc|
000001a0 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d 47 52 |curred...BOOTMGR|
000001b0 20 69 73 20 63 6f 6d 70 72 65 73 73 65 64 00 0d | is compressed..|
000001c0 0a 50 72 65 73 73 20 43 74 72 6c 2b 41 6c 74 2b |.Press Ctrl+Alt+|
000001d0 44 65 6c 20 74 6f 20 72 65 73 74 61 72 74 0d 0a |Del to restart..|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 8a 01 a7 01 bf 01 00 00 55 aa |..............U.|
00000200
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/cow overlayfs 1.5G 96M 1.4G 7% /
udev devtmpfs 1.5G 12K 1.5G 1% /dev
tmpfs tmpfs 301M 1.2M 300M 1% /run
/dev/sdb1 vfat 15G 1.1G 14G 7% /cdrom
/dev/loop0 squashfs 953M 953M 0 100% /rofs
none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
tmpfs tmpfs 1.5G 1.2M 1.5G 1% /tmp
none tmpfs 5.0M 0 5.0M 0% /run/lock
none tmpfs 1.5G 80K 1.5G 1% /run/shm
none tmpfs 100M 80K 100M 1% /run/user
/dev/sda1 fuseblk 350M 238M 113M 68% /mnt/boot-sav/sda1
/dev/sda2 fuseblk 140G 22G 118G 16% /mnt/boot-sav/sda2
/dev/sda3 ext4 9.1G 3.6G 5.1G 42% /mnt/boot-sav/sda3
/dev/sda4 ext4 147G 60M 139G 1% /mnt/boot-sav/sda4
=================== fdisk -l:
Disk /dev/sda: 320.1 GB, 320072933376 bytes
17 heads, 18 sectors/track, 2042949 cylinders, total 625142448 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xfc744778
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 718847 358400 7 HPFS/NTFS/exFAT
/dev/sda2 718848 293687597 146484375 7 HPFS/NTFS/exFAT
/dev/sda3 293689344 313219071 9764864 83 Linux
/dev/sda4 313219072 625141759 155961344 83 Linux
Disk /dev/sdb: 16.0 GB, 16025387008 bytes
255 heads, 63 sectors/track, 1948 cylinders, total 31299584 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x006507af
Device Boot Start End Blocks Id System
/dev/sdb1 * 63 31299583 15649760+ c W95 FAT32 (LBA)
=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub2 of sda3 into the MBR of sda.
Additional repair would be performed: unhide-bootmenu-10s fix-windows-boot
=================== User settings
The settings chosen by the user will not act on the boot.On y voit que le Ubuntu installé a une noyau 3.16.0-30 ce qui est cohérent avec la version 14.04.2 de Ubuntu qui se trouve sur ta LiveUSB comme on peut voir dans cet extrait :
boot-info is executed in live-session (Ubuntu 14.04.2 LTS, trusty, Ubuntu, x86_64)Là où je ne comprends pas, c'est que sur la photo de ton post #1, on peut lire :
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.19.0-15-generic #15-Ubuntu Ce noyau 3.19.0-15, c'est un noyau de la version 15.04 de Ubuntu. Qu'est-ce qu'il vient faire là ? Est-ce que tu as fait des essais de cette dernière version 15.04 et que tu aurais pris une photo ?
Hors ligne
#11 Le 23/06/2015, à 16:35
- briciou62500
Re : Ubuntu ne démmare pas en dualboot avec Windows 8
A oui j'ai complètement oublier de préciser que au post 1 j'essayer belle et bien d'instaler la version 15.04 et comme j'ai vu que sa ne fonctionner pas j'ai voulu installer la version 14.04.2 que j'avais déjà l'iso sur mon pc dans un fichier de windows. Mais la l'erreur que j'ai est bien avec la version 14.04.2
cordialement,
Hors ligne
#12 Le 23/06/2015, à 17:56
- malbo
Re : Ubuntu ne démmare pas en dualboot avec Windows 8
briciou62500 a écrit :
Mais la l'erreur que j'ai est bien avec la version 14.04.2
Je te prie de prendre une photo de l'erreur que tu vois MAINTENANT.
Hors ligne
#13 Le 23/06/2015, à 19:13
- briciou62500
Re : Ubuntu ne démmare pas en dualboot avec Windows 8
Voila http://hpics.li/301d7d2
Hors ligne
#14 Le 23/06/2015, à 19:15
- Romuald-25
Re : Ubuntu ne démmare pas en dualboot avec Windows 8
Bonne chance pour comprendre et décoder ça
Hors ligne
#15 Le 23/06/2015, à 20:26
- malbo
Re : Ubuntu ne démmare pas en dualboot avec Windows 8
On voit toujours la ligne :
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.19.0-15-generic #15-Ubuntu Moi, je ne comprends pas ce que ça fait là. Si quelqu'un peut expliquer le truc, ça m'intéresserait.
Hors ligne
#16 Le 23/06/2015, à 21:02
- Romuald-25
Re : Ubuntu ne démmare pas en dualboot avec Windows 8
As-tu essayé ce que je t'ai conseillé briciou62500 ?
Hors ligne
#17 Le 23/06/2015, à 21:28
- briciou62500
Re : Ubuntu ne démmare pas en dualboot avec Windows 8
Bonjour,
Malbo : Je ne comprend pas non plus désolé.
Romuald-25 : Non je n'est pas eu le temps de le faire aujourd'hui j'essaierais demain et je te dit quoi
cordialement,
Hors ligne
#18 Le 24/06/2015, à 08:48
- malbo
Re : Ubuntu ne démmare pas en dualboot avec Windows 8
Je te prie d'appliquer la procédure décrite dans ce post afin de poster ici le résultat obtenu qui permettra de connaître ton ordi.
Dernière modification par malbo (Le 24/06/2015, à 08:56)
Hors ligne
#19 Le 24/06/2015, à 11:52
- briciou62500
Re : Ubuntu ne démmare pas en dualboot avec Windows 8
Bonjour,
id:
ubuntu
description: Desktop Computer
product: System Product Name (To Be Filled By O.E.M.)
vendor: System manufacturer
version: System Version
serial: System Serial Number
width: 64 bits
capabilities: smbios-2.4 dmi-2.4 vsyscall32
configuration:
boot = normal
chassis = desktop
family = To Be Filled By O.E.M.
sku = To Be Filled By O.E.M.
uuid = 543966B2-74FE-D511-AEB0-059A2E0DEBBC
id:
core
description: Motherboard
product: M2N
vendor: ASUSTeK Computer INC.
physical id:
0
version: Rev 1.xx
serial: MB-1234567890
slot: To Be Filled By O.E.M.
id:
firmware
description: BIOS
vendor: American Megatrends Inc.
physical id:
0
version: 0702
date: 05/28/2007
size: 64KiB
capacity: 448KiB
capabilities: isa pci pnp apm upgrade shadowing escd cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot zipboot biosbootspecification
id:
cpu
description: CPU
product: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+
vendor: Advanced Micro Devices [AMD]
physical id:
3
bus info:
cpu@0
version: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+
serial: To Be Filled By O.E.M.
slot: CPU 1
size: 1GHz
capacity: 2200MHz
width: 64 bits
clock: 200MHz
capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp x86-64 3dnowext 3dnow rep_good nopl extd_apicid pni cx16 lahf_lm cmp_legacy svm extapic cr8_legacy vmmcall cpufreq
id:
cache:0
description: L1 cache
physical id:
5
slot: L1-Cache
size: 256KiB
capacity: 256KiB
capabilities: pipeline-burst internal varies data
id:
cache:1
description: L2 cache
physical id:
6
slot: L2-Cache
size: 1MiB
capacity: 1MiB
capabilities: pipeline-burst internal varies unified
id:
memory:0
description: System Memory
physical id:
33
slot: System board or motherboard
size: 3GiB
id:
bank:0
description: DIMM DDR2 Synchronous 667 MHz (1.5 ns)
product: PartNum0
vendor: Manufacturer0
physical id:
0
serial: SerNum0
slot: DIMM0
size: 1GiB
width: 64 bits
clock: 667MHz (1.5ns)
id:
bank:1
description: DIMM DDR2 Synchronous 667 MHz (1.5 ns)
product: PartNum1
vendor: Manufacturer1
physical id:
1
serial: SerNum1
slot: DIMM1
size: 2GiB
width: 64 bits
clock: 667MHz (1.5ns)
id:
bank:2
description: DIMM [empty]
product: PartNum2
vendor: Manufacturer2
physical id:
2
serial: SerNum2
slot: DIMM2
id:
bank:3
description: DIMM [empty]
product: PartNum3
vendor: Manufacturer3
physical id:
3
serial: SerNum3
slot: DIMM3
id:
memory:1
description: RAM memory
product: MCP61 Memory Controller
vendor: NVIDIA Corporation
physical id:
4
bus info:
pci@0000:00:00.0
version: a1
width: 32 bits
clock: 66MHz (15.2ns)
capabilities: ht bus_master cap_list
configuration:
latency = 0
id:
isa
description: ISA bridge
product: MCP61 LPC Bridge
vendor: NVIDIA Corporation
physical id:
1
bus info:
pci@0000:00:01.0
version: a2
width: 32 bits
clock: 66MHz
capabilities: isa bus_master
configuration:
latency = 0
resources:
ioport : 900(size=256)
id:
serial
description: SMBus
product: MCP61 SMBus
vendor: NVIDIA Corporation
physical id:
1.1
bus info:
pci@0000:00:01.1
version: a2
width: 32 bits
clock: 66MHz
capabilities: pm cap_list
configuration:
driver = nForce2_smbus
latency = 0
resources:
irq : 10
ioport : dc00(size=64)
ioport : 600(size=64)
ioport : 700(size=64)
id:
memory:2
description: RAM memory
product: MCP61 Memory Controller
vendor: NVIDIA Corporation
physical id:
1.2
bus info:
pci@0000:00:01.2
version: a2
width: 32 bits
clock: 66MHz (15.2ns)
configuration:
latency = 0
id:
usb:0
description: USB controller
product: MCP61 USB 1.1 Controller
vendor: NVIDIA Corporation
physical id:
2
bus info:
pci@0000:00:02.0
version: a2
width: 32 bits
clock: 66MHz
capabilities: pm ohci bus_master cap_list
configuration:
driver = ohci-pci
latency = 0
maxlatency = 1
mingnt = 3
resources:
irq : 23
memory : dfeff000-dfefffff
id:
usb:1
description: USB controller
product: MCP61 USB 2.0 Controller
vendor: NVIDIA Corporation
physical id:
2.1
bus info:
pci@0000:00:02.1
version: a2
width: 32 bits
clock: 66MHz
capabilities: debug pm ehci bus_master cap_list
configuration:
driver = ehci-pci
latency = 0
maxlatency = 1
mingnt = 3
resources:
irq : 22
memory : dfefec00-dfefecff
id:
pci:0
description: PCI bridge
product: MCP61 PCI bridge
vendor: NVIDIA Corporation
physical id:
100
bus info:
pci@0000:00:04.0
version: a1
width: 32 bits
clock: 66MHz
capabilities: pci ht subtractive_decode bus_master cap_list
id:
multimedia
description: Audio device
product: MCP61 High Definition Audio
vendor: NVIDIA Corporation
physical id:
5
bus info:
pci@0000:00:05.0
version: a2
width: 32 bits
clock: 66MHz
capabilities: pm msi ht bus_master cap_list
configuration:
driver = snd_hda_intel
latency = 0
maxlatency = 5
mingnt = 2
resources:
irq : 22
memory : dfef8000-dfefbfff
id:
ide:0
description: IDE interface
product: MCP61 IDE
vendor: NVIDIA Corporation
physical id:
6
bus info:
pci@0000:00:06.0
version: a2
width: 32 bits
clock: 66MHz
capabilities: ide pm bus_master cap_list
configuration:
driver = pata_amd
latency = 0
maxlatency = 1
mingnt = 3
resources:
irq : 0
ioport : 1f0(size=8)
ioport : 3f6
ioport : 170(size=8)
ioport : 376
ioport : ffa0(size=16)
id:
bridge
description: Ethernet interface
product: MCP61 Ethernet
vendor: NVIDIA Corporation
physical id:
7
bus info:
pci@0000:00:07.0
logical name:
eth0
version: a2
serial: 00:1b:fc:eb:d6:d2
size: 10000000
capacity: 1000000000
width: 32 bits
clock: 66MHz
capabilities: bridge pm msi ht bus_master cap_list ethernet physical mii 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
configuration:
autonegotiation = on
broadcast = yes
driver = forcedeth
driverversion = 0.64
duplex = full
ip = 192.168.1.13
latency = 0
link = yes
maxlatency = 20
mingnt = 1
multicast = yes
port = MII
speed = 10Mbit/s
resources:
irq : 45
memory : dfefd000-dfefdfff
ioport : d480(size=8)
id:
ide:1
description: IDE interface
product: MCP61 SATA Controller
vendor: NVIDIA Corporation
physical id:
8
bus info:
pci@0000:00:08.0
version: a2
width: 32 bits
clock: 66MHz
capabilities: ide pm msi ht bus_master cap_list
configuration:
driver = sata_nv
latency = 0
maxlatency = 1
mingnt = 3
resources:
irq : 20
ioport : d400(size=8)
ioport : d080(size=4)
ioport : d000(size=8)
ioport : cc00(size=4)
ioport : c880(size=16)
memory : dfefc000-dfefcfff
id:
ide:2
description: IDE interface
product: MCP61 SATA Controller
vendor: NVIDIA Corporation
physical id:
8.1
bus info:
pci@0000:00:08.1
version: a2
width: 32 bits
clock: 66MHz
capabilities: ide pm msi ht bus_master cap_list
configuration:
driver = sata_nv
latency = 0
maxlatency = 1
mingnt = 3
resources:
irq : 23
ioport : c800(size=8)
ioport : c480(size=4)
ioport : c400(size=8)
ioport : c080(size=4)
ioport : c000(size=16)
memory : dfef3000-dfef3fff
id:
pci:1
description: PCI bridge
product: MCP61 PCI Express bridge
vendor: NVIDIA Corporation
physical id:
9
bus info:
pci@0000:00:09.0
version: a2
width: 32 bits
clock: 33MHz
capabilities: pci pm msi ht pciexpress normal_decode bus_master cap_list
configuration:
driver = pcieport
resources:
irq : 40
ioport : e000(size=4096)
memory : dff00000-dfffffff
ioport : c0000000(size=268435456)
id:
display
description: VGA compatible controller
product: RV610 [Radeon HD 2400 PRO]
vendor: Advanced Micro Devices, Inc. [AMD/ATI]
physical id:
0
bus info:
pci@0000:02:00.0
version: 00
width: 64 bits
clock: 33MHz
capabilities: pm pciexpress msi vga_controller bus_master cap_list rom
configuration:
driver = radeon
latency = 0
resources:
irq : 43
memory : c0000000-cfffffff
memory : dfff0000-dfffffff
ioport : e800(size=256)
memory : dffc0000-dffdffff
id:
multimedia
description: Audio device
product: RV610 HDMI Audio [Radeon HD 2350/2400 Series]
vendor: Advanced Micro Devices, Inc. [AMD/ATI]
physical id:
0.1
bus info:
pci@0000:02:00.1
version: 00
width: 64 bits
clock: 33MHz
capabilities: pm pciexpress msi bus_master cap_list
configuration:
driver = snd_hda_intel
latency = 0
resources:
irq : 44
memory : dffec000-dffeffff
id:
pci:2
description: PCI bridge
product: MCP61 PCI Express bridge
vendor: NVIDIA Corporation
physical id:
b
bus info:
pci@0000:00:0b.0
version: a2
width: 32 bits
clock: 33MHz
capabilities: pci pm msi ht pciexpress normal_decode bus_master cap_list
configuration:
driver = pcieport
resources:
irq : 41
id:
pci:3
description: PCI bridge
product: MCP61 PCI Express bridge
vendor: NVIDIA Corporation
physical id:
c
bus info:
pci@0000:00:0c.0
version: a2
width: 32 bits
clock: 33MHz
capabilities: pci pm msi ht pciexpress normal_decode bus_master cap_list
configuration:
driver = pcieport
resources:
irq : 42
id:
pci:4
description: Host bridge
product: K8 [Athlon64/Opteron] HyperTransport Technology Configuration
vendor: Advanced Micro Devices, Inc. [AMD]
physical id:
101
bus info:
pci@0000:00:18.0
version: 00
width: 32 bits
clock: 33MHz
id:
pci:5
description: Host bridge
product: K8 [Athlon64/Opteron] Address Map
vendor: Advanced Micro Devices, Inc. [AMD]
physical id:
102
bus info:
pci@0000:00:18.1
version: 00
width: 32 bits
clock: 33MHz
id:
pci:6
description: Host bridge
product: K8 [Athlon64/Opteron] DRAM Controller
vendor: Advanced Micro Devices, Inc. [AMD]
physical id:
103
bus info:
pci@0000:00:18.2
version: 00
width: 32 bits
clock: 33MHz
configuration:
driver = amd64_edac
resources:
irq : 0
id:
pci:7
description: Host bridge
product: K8 [Athlon64/Opteron] Miscellaneous Control
vendor: Advanced Micro Devices, Inc. [AMD]
physical id:
104
bus info:
pci@0000:00:18.3
version: 00
width: 32 bits
clock: 33MHz
configuration:
driver = k8temp
resources:
irq : 0
id:
scsi:0
physical id:
a
logical name:
scsi3
capabilities: emulated
id:
disk
description: ATA Disk
product: MAXTOR STM332082
vendor: Maxtor
physical id:
0.0.0
bus info:
scsi@3:0.0.0
logical name:
/dev/sda
version: E
serial: 6QF2HGTW
size: 298GiB (320GB)
capabilities: partitioned partitioned:dos
configuration:
ansiversion = 5
sectorsize = 512
signature = fc744778
id:
volume:0
description: Windows NTFS volume
physical id:
1
bus info:
scsi@3:0.0.0,1
logical name:
/dev/sda1
version: 3.1
serial: cae7-e59b
size: 348MiB
capacity: 350MiB
capabilities: primary bootable ntfs initialized
configuration:
clustersize = 4096
created = 2015-06-22 03:09:51
filesystem = ntfs
label = Réservé au système
modified_by_chkdsk = true
mounted_on_nt4 = true
resize_log_file = true
state = dirty
upgrade_on_mount = true
id:
volume:1
description: Windows NTFS volume
physical id:
2
bus info:
scsi@3:0.0.0,2
logical name:
/dev/sda2
version: 3.1
serial: 2a023b58-fadf-924e-861e-f8d444337180
size: 139GiB
capacity: 139GiB
capabilities: primary ntfs initialized
configuration:
clustersize = 4096
created = 2015-06-22 03:11:04
filesystem = ntfs
modified_by_chkdsk = true
mounted_on_nt4 = true
resize_log_file = true
state = dirty
upgrade_on_mount = true
id:
volume:2
description: EXT4 volume
vendor: Linux
physical id:
3
bus info:
scsi@3:0.0.0,3
logical name:
/dev/sda3
version: 1.0
serial: 0a749efe-4c9d-443f-a4f9-ab71c98ae106
size: 9536MiB
capacity: 9536MiB
capabilities: primary journaled extended_attributes large_files huge_files dir_nlink extents ext4 ext2 initialized
configuration:
created = 2015-06-22 17:16:56
filesystem = ext4
lastmountpoint = /mnt/boot-sav/sda3
modified = 2015-06-23 12:22:21
mounted = 2015-06-23 12:22:05
state = clean
id:
volume:3
description: EXT4 volume
vendor: Linux
physical id:
4
bus info:
scsi@3:0.0.0,4
logical name:
/dev/sda4
version: 1.0
serial: 8ec923b7-d9dc-4b7c-beed-31ccbca0059f
size: 148GiB
capacity: 148GiB
capabilities: primary journaled extended_attributes large_files huge_files dir_nlink extents ext4 ext2 initialized
configuration:
created = 2015-06-22 17:16:59
filesystem = ext4
lastmountpoint = /media/ubuntu/8ec923b7-d9dc-4b7c-beed-31ccbca0059f
modified = 2015-06-23 12:27:33
mounted = 2015-06-23 12:26:19
state = clean
id:
scsi:1
physical id:
d
bus info:
usb@1:1
logical name:
scsi2
capabilities: emulated scsi-host
configuration:
driver = usb-storage
id:
disk
description: SCSI Disk
physical id:
0.0.0
bus info:
scsi@2:0.0.0
logical name:
/dev/sdb
size: 14GiB (16GB)
capabilities: partitioned partitioned:dos
configuration:
sectorsize = 512
signature = 006507af
id:
volume
description: Windows FAT volume
vendor: SYSLINUX
physical id:
1
bus info:
scsi@2:0.0.0,1
logical name:
/dev/sdb1
logical name:
/cdrom
version: FAT32
serial: b032-b9d6
size: 14GiB
capacity: 14GiB
capabilities: primary bootable fat initialized
configuration:
FATs = 2
filesystem = fat
mount.fstype = vfat
mount.options = ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro
state = mounted
id:
scsi:2
physical id:
e
logical name:
scsi5
capabilities: emulated
id:
cdrom
description: DVD-RAM writer
product: DVD RW AD-7170S
vendor: Optiarc
physical id:
0.0.0
bus info:
scsi@5:0.0.0
logical name:
/dev/cdrom
logical name:
/dev/sr0
version: 1.01
serial: [
capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram
configuration:
ansiversion = 5
status = nodisc
id:
scsi:3
physical id:
f
logical name:
scsi6
capabilities: emulated
id:
cdrom
description: DVD reader
product: DVD-ROM DDU1615S
vendor: SONY
physical id:
0.0.0
bus info:
scsi@6:0.0.0
logical name:
/dev/sr1
version: EYS3
capabilities: removable audio dvd
configuration:
ansiversion = 5
status = nodiscHors ligne
#20 Le 24/06/2015, à 12:14
- malbo
Re : Ubuntu ne démmare pas en dualboot avec Windows 8
On voit que ta carte-mère est une Asus M2N (ça, on le voyait déjà sur la photo), que le processeur est un AMD Athlon(tm) 64 X2 Dual Core Processor 4200+, que tu as 3 Go de RAM et que la carte graphique est une Radeon HD 2400 PRO.
Tout ce matériel semble bien fonctionner en session live Ubuntu 14.04.2 puisque tu as pu faire le Boot-Info depuis cette session live. Ce que je ne sais pas décoder - comme le dit Romuald-25 - c'est ce qu'on voit sur la photo s'agissant du démarrage sur ton Ubuntu installé. Peut-être que ça va inspirer quelqu'un...
Hors ligne
#21 Le 24/06/2015, à 13:13
- malbo
Re : Ubuntu ne démmare pas en dualboot avec Windows 8
Depuis ta session live, lance l'utilitaire de disque (pour le trouver, il suffit de chercher taper "dis" dans le champ de recherche des applications et ça va te proposer "disks"), et fais ce qui est décrit dans le paragraphe 2.3 Afficher les données SMART. Tu raconteras ce que tu vas voir.
Dernière modification par malbo (Le 25/06/2015, à 05:24)
Hors ligne
#22 Le 24/06/2015, à 18:44
- briciou62500
Re : Ubuntu ne démmare pas en dualboot avec Windows 8
Bonjour,
Je suis dans Disks mais de quel paragraphe parle tu ??
cordialement,
Hors ligne
#23 Le 24/06/2015, à 20:57
- Romuald-25
Re : Ubuntu ne démmare pas en dualboot avec Windows 8
Peu importe quel paragraphe, je vois de quoi veut parler malbo. Quand tu es dans Disques (ou Disks pour ubuntu anglophone), tu cliques sur l'icone en haut à droite avec les 3 petites lignes (ou la roue dentée je sais plus), puis tu choisis Données SMART et Auto-test". Une liste va s'afficher avec différentes données statistiques du disque physique.
Hors ligne
#24 Le 24/06/2015, à 21:50
- Romuald-25
Re : Ubuntu ne démmare pas en dualboot avec Windows 8
Ou alors sinon il y a une alternative: via ces lignes de commande:
sudo apt-get install smartmontoolspuis
sudo smartctl -d ata -a /dev/sdX # sdX représente évidemment le nom de ton disque: sda, sdb...
sudo smartctl -d scsi -a /dev/sdX
sudo smartctl -d sat -a /dev/sdX # Bien-sûr ne copie pas les 3 lignes de commande, en général une seule marche, tu découvriras laquelle en les essayant toutes, ça dépend de ton disque en fait.Cette dernière commande renverra sous forme de tableau en tabulation les mêmes infos qu'en mode graphique avec l'utilitaire Disques. Si tu l'utilises, pense à élargir le terminal sinon ton tableau sera illisible avec les retours à la ligne. Il n'y a pas tellement d'avantage, sinon peut-être plus de précisions sur ton disque, mais forcément c'est dans un terminal.
Dernière modification par Romuald-25 (Le 24/06/2015, à 21:54)
Hors ligne
#25 Le 24/06/2015, à 22:38
- briciou62500
Re : Ubuntu ne démmare pas en dualboot avec Windows 8
Ok merci beaucoup je ferrait sa demain et je vous dit quoi
Hors ligne