#1 Le 06/08/2015, à 16:28
- quentino18
RÉSOLU - Boot-repair - Problème pour retrouver Grub
Bonjour à tous,
Suite à l'arrivée de WIndows 10 et au presque décès de mon windows 8, j'ai décidé de l'installer.
J'avais avant un dual boot via grub qui me permettait de chosir entre les deux.
J'ai donc installé windows 10 sur la partition windows, sauf que il n'y a plus moyen d'afficher grub au démarrage.
J'ai désactivé la veille prolongée de windows pour avoir accès au BIOS, j'ai activé UEFI ( sinon impossible de booter sur USB) , et j'ai booté sur mon live USB Ubuntu, J'ai lancé Boot-repair en recommandé, et aucun changement.
J'ai donc redémarré mon live USB, fait un scan avec Boot-repair que voici : http://paste.ubuntu.com/12013891/
J'ai peur de faire des conneries ...
Que doit-je faire pour de nouveau accéder à mes deux partitions ?
Merci d'avance.
Quentin
Dernière modification par quentino18 (Le 06/08/2015, à 22:23)
Hors ligne
#2 Le 06/08/2015, à 16:52
- Babdu89
Re : RÉSOLU - Boot-repair - Problème pour retrouver Grub
Bonjour.
J'ai copié ton boot info ici;
Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 9Feb2015]
============================= Boot Info Summary: ===============================
=> Windows 7/8/2012 is installed in the MBR of /dev/sda.
=> Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /bootmgr /Boot/BCD
sda2: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 7/2008: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe
sda3: __________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 15.04
Boot files: /boot/grub/menu.lst /boot/grub/grub.cfg /etc/fstab
/boot/grub/i386-pc/core.img
sda6: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sda4: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdb1: __________________________________________________________________________
File system: vfat
Boot sector type: SYSLINUX 4.05 20120131
Boot sector info: Syslinux looks at sector 2080384 of /dev/sdb1 for its
second stage. SYSLINUX is installed in the directory.
No errors found in the Boot Parameter Block.
Operating System:
Boot files: /boot/grub/grub.cfg /syslinux/syslinux.cfg
/casper/vmlinuz.efi /EFI/BOOT/grubx64.efi /ldlinux.sys
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 206,847 204,800 7 NTFS / exFAT / HPFS
/dev/sda2 206,848 1,228,804,095 1,228,597,248 7 NTFS / exFAT / HPFS
/dev/sda3 1,363,972,094 1,415,968,767 51,996,674 5 Extended
/dev/sda5 1,363,972,096 1,403,970,142 39,998,047 83 Linux
/dev/sda6 1,403,971,584 1,415,968,767 11,997,184 82 Linux swap / Solaris
/dev/sda4 1,415,968,768 1,465,147,391 49,178,624 7 NTFS / exFAT / HPFS
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 31.0 GB, 30992891904 bytes
74 heads, 10 sectors/track, 81801 cylinders, total 60532992 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 8,064 60,532,991 60,524,928 c W95 FAT32 (LBA)
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 C20CE2910CE27FB1 ntfs Réservé au système
/dev/sda2 B6A400D9A4009DCD ntfs
/dev/sda4 33140E3E1297810E ntfs swap
/dev/sda5 c6b91238-73ef-475e-813e-98eae73a2f71 ext4
/dev/sda6 707d3c17-0fcf-4d24-8908-3cd5afa88417 swap
/dev/sdb1 EA86-BCBE vfat CLE 32
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Aug 6 16:07 ata-HL-DT-ST_DVDRAM_GT51N_KZUC1R85237 -> ../../sr0
lrwxrwxrwx 1 root root 9 Aug 6 16:12 ata-Hitachi_HTS547575A9E384_J2140054KA0TGA -> ../../sda
lrwxrwxrwx 1 root root 10 Aug 6 16:13 ata-Hitachi_HTS547575A9E384_J2140054KA0TGA-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Aug 6 16:13 ata-Hitachi_HTS547575A9E384_J2140054KA0TGA-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Aug 6 16:07 ata-Hitachi_HTS547575A9E384_J2140054KA0TGA-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Aug 6 16:07 ata-Hitachi_HTS547575A9E384_J2140054KA0TGA-part4 -> ../../sda4
lrwxrwxrwx 1 root root 10 Aug 6 16:07 ata-Hitachi_HTS547575A9E384_J2140054KA0TGA-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 Aug 6 16:07 ata-Hitachi_HTS547575A9E384_J2140054KA0TGA-part6 -> ../../sda6
lrwxrwxrwx 1 root root 9 Aug 6 16:12 usb-_USB_DISK_2.0_070D3BAA2A416165-0:0 -> ../../sdb
lrwxrwxrwx 1 root root 10 Aug 6 16:07 usb-_USB_DISK_2.0_070D3BAA2A416165-0:0-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 9 Aug 6 16:12 wwn-0x5000cca644eed52f -> ../../sda
lrwxrwxrwx 1 root root 10 Aug 6 16:13 wwn-0x5000cca644eed52f-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Aug 6 16:13 wwn-0x5000cca644eed52f-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Aug 6 16:07 wwn-0x5000cca644eed52f-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Aug 6 16:07 wwn-0x5000cca644eed52f-part4 -> ../../sda4
lrwxrwxrwx 1 root root 10 Aug 6 16:07 wwn-0x5000cca644eed52f-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 Aug 6 16:07 wwn-0x5000cca644eed52f-part6 -> ../../sda6
lrwxrwxrwx 1 root root 9 Aug 6 16:07 wwn-0x5001480000000000 -> ../../sr0
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sdb1 /cdrom vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
=========================== sda5/boot/grub/menu.lst: ===========================
--------------------------------------------------------------------------------
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=c6b91238-73ef-475e-813e-98eae73a2f71 ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=(hostdisk//dev/sda,4)
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 15.04, kernel 3.13.0-36-generic
root (hostdisk//dev/sda,4)
kernel /boot/vmlinuz-3.13.0-36-generic root=UUID=c6b91238-73ef-475e-813e-98eae73a2f71 ro quiet splash
initrd /boot/initrd.img-3.13.0-36-generic
title Ubuntu 15.04, kernel 3.13.0-36-generic (recovery mode)
root (hostdisk//dev/sda,4)
kernel /boot/vmlinuz-3.13.0-36-generic root=UUID=c6b91238-73ef-475e-813e-98eae73a2f71 ro single
initrd /boot/initrd.img-3.13.0-36-generic
title Ubuntu 15.04, memtest86+
root (hostdisk//dev/sda,4)
kernel /boot/memtest86+.bin
### END DEBIAN AUTOMAGIC KERNELS LIST
--------------------------------------------------------------------------------
=========================== sda5/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 c6b91238-73ef-475e-813e-98eae73a2f71
else
search --no-floppy --fs-uuid --set=root c6b91238-73ef-475e-813e-98eae73a2f71
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=-1
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=10
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=10
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-c6b91238-73ef-475e-813e-98eae73a2f71' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 c6b91238-73ef-475e-813e-98eae73a2f71
else
search --no-floppy --fs-uuid --set=root c6b91238-73ef-475e-813e-98eae73a2f71
fi
linux /boot/vmlinuz-3.13.0-36-generic root=UUID=c6b91238-73ef-475e-813e-98eae73a2f71 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-36-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-c6b91238-73ef-475e-813e-98eae73a2f71' {
menuentry 'Ubuntu, avec Linux 3.13.0-36-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-36-generic-advanced-c6b91238-73ef-475e-813e-98eae73a2f71' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 c6b91238-73ef-475e-813e-98eae73a2f71
else
search --no-floppy --fs-uuid --set=root c6b91238-73ef-475e-813e-98eae73a2f71
fi
echo 'Chargement de Linux 3.13.0-36-generic…'
linux /boot/vmlinuz-3.13.0-36-generic root=UUID=c6b91238-73ef-475e-813e-98eae73a2f71 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-36-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-36-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-36-generic-init-upstart-c6b91238-73ef-475e-813e-98eae73a2f71' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 c6b91238-73ef-475e-813e-98eae73a2f71
else
search --no-floppy --fs-uuid --set=root c6b91238-73ef-475e-813e-98eae73a2f71
fi
echo 'Chargement de Linux 3.13.0-36-generic…'
linux /boot/vmlinuz-3.13.0-36-generic root=UUID=c6b91238-73ef-475e-813e-98eae73a2f71 ro quiet splash $vt_handoff init=/sbin/upstart
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-36-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-36-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-36-generic-recovery-c6b91238-73ef-475e-813e-98eae73a2f71' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 c6b91238-73ef-475e-813e-98eae73a2f71
else
search --no-floppy --fs-uuid --set=root c6b91238-73ef-475e-813e-98eae73a2f71
fi
echo 'Chargement de Linux 3.13.0-36-generic…'
linux /boot/vmlinuz-3.13.0-36-generic root=UUID=c6b91238-73ef-475e-813e-98eae73a2f71 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-36-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/10_linux_proxy ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
### END /etc/grub.d/10_linux_proxy ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/30_os-prober_proxy ###
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
set timeout=10
fi
menuentry "Windows 8" --class windows --class os $menuentry_id_option 'osprober-chain-B052753F52750AFC' {
insmod part_msdos
insmod ntfs
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 B052753F52750AFC
else
search --no-floppy --fs-uuid --set=root B052753F52750AFC
fi
parttool ${root} hidden-
drivemap -s (hd0) ${root}
chainloader +1
}
### END /etc/grub.d/30_os-prober_proxy ###
### BEGIN /etc/grub.d/33_linux_proxy ###
menuentry "Ubuntu" --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-c6b91238-73ef-475e-813e-98eae73a2f71' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 c6b91238-73ef-475e-813e-98eae73a2f71
else
search --no-floppy --fs-uuid --set=root c6b91238-73ef-475e-813e-98eae73a2f71
fi
linux /boot/vmlinuz-3.13.0-36-generic root=UUID=c6b91238-73ef-475e-813e-98eae73a2f71 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-36-generic
}
submenu "Options avancées pour Ubuntu"{
menuentry "Ubuntu, avec Linux 3.13.0-36-generic" --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-36-generic-advanced-c6b91238-73ef-475e-813e-98eae73a2f71' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 c6b91238-73ef-475e-813e-98eae73a2f71
else
search --no-floppy --fs-uuid --set=root c6b91238-73ef-475e-813e-98eae73a2f71
fi
echo 'Chargement de Linux 3.13.0-36-generic…'
linux /boot/vmlinuz-3.13.0-36-generic root=UUID=c6b91238-73ef-475e-813e-98eae73a2f71 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-36-generic
}
menuentry "Ubuntu, with Linux 3.13.0-36-generic (recovery mode)" --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-36-generic-recovery-c6b91238-73ef-475e-813e-98eae73a2f71' {
recordfail
load_video
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 c6b91238-73ef-475e-813e-98eae73a2f71
else
search --no-floppy --fs-uuid --set=root c6b91238-73ef-475e-813e-98eae73a2f71
fi
echo 'Chargement de Linux 3.13.0-36-generic…'
linux /boot/vmlinuz-3.13.0-36-generic root=UUID=c6b91238-73ef-475e-813e-98eae73a2f71 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-36-generic
}
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 c6b91238-73ef-475e-813e-98eae73a2f71
else
search --no-floppy --fs-uuid --set=root c6b91238-73ef-475e-813e-98eae73a2f71
fi
knetbsd /boot/memtest86+.elf
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 c6b91238-73ef-475e-813e-98eae73a2f71
else
search --no-floppy --fs-uuid --set=root c6b91238-73ef-475e-813e-98eae73a2f71
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
}
### END /etc/grub.d/33_linux_proxy ###
### BEGIN /etc/grub.d/34_linux_xen ###
### END /etc/grub.d/34_linux_xen ###
### BEGIN /etc/grub.d/35_uefi-firmware ###
### END /etc/grub.d/35_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda5/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda5 during installation
UUID=c6b91238-73ef-475e-813e-98eae73a2f71 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda6 during installation
UUID=707d3c17-0fcf-4d24-8908-3cd5afa88417 none swap sw 0 0
--------------------------------------------------------------------------------
=========================== sdb1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
if loadfont /boot/grub/font.pf2 ; then
set gfxmode=auto
insmod efi_gop
insmod efi_uga
insmod gfxterm
terminal_output gfxterm
fi
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
menuentry "Try Ubuntu without installing" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
initrd /casper/initrd.lz
}
menuentry "Install Ubuntu" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash --
initrd /casper/initrd.lz
}
menuentry "OEM install (for manufacturers)" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true --
initrd /casper/initrd.lz
}
menuentry "Check disc for defects" {
set gfxpayload=keep
linux /casper/vmlinuz.efi boot=casper integrity-check quiet splash --
initrd /casper/initrd.lz
}
--------------------------------------------------------------------------------
========================= sdb1/syslinux/syslinux.cfg: ==========================
--------------------------------------------------------------------------------
# D-I config version 2.0
include menu.cfg
default vesamenu.c32
prompt 0
timeout 50
ui gfxboot bootlogo
--------------------------------------------------------------------------------
============== sdb1: Version of COM32(R) files used by Syslinux: ===============
syslinux/chain.c32 : COM32R module (v4.xx)
syslinux/gfxboot.c32 : COM32R module (v4.xx)
syslinux/vesamenu.c32 : COM32R module (v4.xx)
=============================== StdErr Messages: ===============================
File descriptor 9 (/proc/6370/mounts) leaked on lvs invocation. Parent PID 13902: bash
File descriptor 63 (pipe:[59830]) leaked on lvs invocation. Parent PID 13902: bash
No volume groups found
ADDITIONAL INFORMATION :
=================== log of boot-repair 2015-08-06__16h12 ===================
boot-repair version : 4ppa33
boot-sav version : 4ppa33
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 4ppa33
boot-repair is executed in live-session (Ubuntu 14.04.2 LTS, trusty, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
ls: cannot access /home/usr/.config: No such file or directory
=================== os-prober:
/dev/sda5:Ubuntu 15.04 (15.04):Ubuntu:linux
=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/sda1: LABEL="RM-CM-)servM-CM-) au systM-CM-(me" UUID="C20CE2910CE27FB1" TYPE="ntfs"
/dev/sda2: UUID="B6A400D9A4009DCD" TYPE="ntfs"
/dev/sda4: LABEL="swap" UUID="33140E3E1297810E" TYPE="ntfs"
/dev/sda5: UUID="c6b91238-73ef-475e-813e-98eae73a2f71" TYPE="ext4"
/dev/sda6: UUID="707d3c17-0fcf-4d24-8908-3cd5afa88417" TYPE="swap"
/dev/sdb1: LABEL="CLE 32" UUID="EA86-BCBE" TYPE="vfat"
1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
Windows not detected by os-prober on sda2.
Warning: extended partition does not start at a cylinder boundary.
DOS and Linux will interpret the contents differently.
=================== sda5/etc/grub.d/ :
drwxr-xr-x 5 root root 4096 Aug 6 16:01 grub.d
drwxr-xr-x 2 root root 4096 Jul 22 2014 grub.d.ori
total 40
-rwxr-xr-x 1 root root 706 Sep 26 2014 10_linux_proxy
-rwxr-xr-x 1 root root 211 Sep 26 2014 30_os-prober_proxy
-rwxr-xr-x 1 root root 1292 Sep 26 2014 33_linux_proxy
-rwxr-xr-x 1 root root 10412 May 15 2014 34_linux_xen
-rwxr-xr-x 1 root root 1416 May 15 2014 35_uefi-firmware
drwxr-xr-x 4 root root 4096 Sep 26 2014 backup
drwxr-xr-x 2 root root 4096 Sep 26 2014 bin
drwxr-xr-x 2 root root 4096 Sep 26 2014 proxifiedScripts
=================== sda5/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
=================== sda5saved_entry=0/grub/grubenv :
saved_entry=0
/mnt/boot-sav/sda5/boot/grub/menu.lst detected
ls /sys/firmware/efi/vars : WdtPersistentData-78ce2354-cfbc-4643-aeba-07a27fa892bf,VersionGlobalVariable-8be4df61-93ca-11d2-aa0d-00e098032b8c,UsbSupport-ec87d643-eba4-4bb5-a1e5-3f3e36b20da9,UsbMassDevValid-ec87d643-eba4-4bb5-a1e5-3f3e36b20da9,UsbMassDevNum-ec87d643-eba4-4bb5-a1e5-3f3e36b20da9,Timeout-8be4df61-93ca-11d2-aa0d-00e098032b8c,StdDefaults-4599d26f-1a11-49b8-b91f-858745cff824,SetupVolatileData-ec87d643-eba4-4bb5-a1e5-3f3e36b20da9,Setup-ec87d643-eba4-4bb5-a1e5-3f3e36b20da9,SetupCpuFeatures-ec87d643-eba4-4bb5-a1e5-3f3e36b20da9,SetupAmtFeatures-ec87d643-eba4-4bb5-a1e5-3f3e36b20da9,SBRev-8be4df61-93ca-11d2-aa0d-00e098032b8c,Save1MBuffer-e966c438-b841-2d6e-8137-09b1f51e2d78,PlatformLangCodes-8be4df61-93ca-11d2-aa0d-00e098032b8c,PlatformLang-8be4df61-93ca-11d2-aa0d-00e098032b8c,PetAlertCfg-8be4df61-93ca-11d2-aa0d-00e098032b8c,PchS3Peim-e6c2f70a-b604-4877-85ba-deec89e117eb,PchInit-e6c2f70a-b604-4877-85ba-deec89e117eb,new_var,MonotonicCounter-8be4df61-93ca-11d2-aa0d-00e098032b8c,MemCeil.-8be4df61-93ca-11d2-aa0d-00e098032b8c,MeBiosExtensionSetup-1bad711c-d451-4241-b1f3-8537812e0c70,LegacyDevOrder-a56074db-65fe-45f7-bd21-2d2bdd8e9652,LegacyDevChecksum-a56074db-65fe-45f7-bd21-2d2bdd8e9652,LDP-685f4413-7555-43bb-a5b3-721eb7ec1695,LangCodes-8be4df61-93ca-11d2-aa0d-00e098032b8c,Lang-8be4df61-93ca-11d2-aa0d-00e098032b8c,IccPersistentData-64192dca-d034-49d2-a6de-65a829eb4c74,IccAdvancedSetupDataVar-7b77fb8b-1e0d-4d7e-953f-3980a261e077,FwVersionInfo-8be4df61-93ca-11d2-aa0d-00e098032b8c,ExtdAcpiGlobalVariable-bf0c61cd-09ba-49d8-9187-c23a193841a4,del_var,DefaultLegacyDevOrder-3c4ead08-45ae-4315-8d15-a60eaa8caf69,DefaultBootOrder-45cf35f6-0d6e-4d04-856a-0370a5b16f53,CpuS3Resume-30b98b95-dfa3-4501-a3ce-e38c186384a0,ConsoleLock-368cda0d-cf31-4b9b-8cf6-e7d1bfff157e,ConOutDev-8be4df61-93ca-11d2-aa0d-00e098032b8c,ConOut-8be4df61-93ca-11d2-aa0d-00e098032b8c,ConInDev-8be4df61-93ca-11d2-aa0d-00e098032b8c,ConIn-8be4df61-93ca-11d2-aa0d-00e098032b8c,ConErrDev-8be4df61-93ca-11d2-aa0d-00e098032b8c,BootOrder-8be4df61-93ca-11d2-aa0d-00e098032b8c,BootCurrent-8be4df61-93ca-11d2-aa0d-00e098032b8c,Boot0005-8be4df61-93ca-11d2-aa0d-00e098032b8c,Boot0004-8be4df61-93ca-11d2-aa0d-00e098032b8c,Boot0002-8be4df61-93ca-11d2-aa0d-00e098032b8c,Boot0001-8be4df61-93ca-11d2-aa0d-00e098032b8c,Boot0000-8be4df61-93ca-11d2-aa0d-00e098032b8c,ASUSSetupDefault-f1920447-7a78-4c0d-a028-ba9d003985e8,AMITSESetup-c811fa38-42c8-4579-a9bb-60e94eddfb34,AEDID-75860b2c-f315-4ff1-9e19-029ad0129dba,AcpiGlobalVariable-af9ffd67-ec10-488a-9dfc-6cbf5ee22c2e,
Please report this message to boot.repair@gmail.com
=================== efibootmgr -v
BootCurrent: 0005
Timeout: 0 seconds
BootOrder: 0002,0005,0000,0001,0004
Boot0000 Hard Drive BIOS(2,0,00)
Boot0001 CD/DVD Drive BIOS(3,0,00)
Boot0002* USB HD(1,1f80,738600,c3072e18)File()
Boot0004 ubuntu HD(2,773800,ee800,a4bc108e-edfe-4d41-a161-60f4c9e77f9a)File(EFIubuntushimx64.efi)
Boot0005* UEFI: USB DISK 2.0 PMAP ACPI(a0341d0,0)PCI(1d,0)USB(1,0)USB(2,0)HD(1,1f80,39b8980,000db59c)
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
SecureBoot maybe enabled. (maybe sec-boot, Please report this message to boot.repair@gmail.com)
=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, bootmgr, is-winboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda1.
sda2 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, bootmgr, is-winboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda2.
sda5 : sda, not-sepboot, grubenv-ng nogrub, no-docgrub, no-update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, nogrubinstall, with--usr, fstab-without-usr, not-sep-usr, customized, farbios, /mnt/boot-sav/sda5.
sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 2048 sectors * 512 bytes
=================== parted -l:
Model: ATA Hitachi HTS54757 (scsi)
Disk /dev/sda: 750GB
Sector size (logical/physical): 512B/4096B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 106MB 105MB primary ntfs boot
2 106MB 629GB 629GB primary ntfs
3 698GB 725GB 26.6GB extended
5 698GB 719GB 20.5GB logical ext4
6 719GB 725GB 6143MB logical linux-swap(v1)
4 725GB 750GB 25.2GB primary ntfs
Model: USB DISK 2.0 (scsi)
Disk /dev/sdb: 31.0GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 4129kB 31.0GB 31.0GB primary fat32 boot, lba
=================== parted -lm:
BYT;
/dev/sda:750GB:scsi:512:4096:msdos:ATA Hitachi HTS54757;
1:1049kB:106MB:105MB:ntfs::boot;
2:106MB:629GB:629GB:ntfs::;
3:698GB:725GB:26.6GB:::;
5:698GB:719GB:20.5GB:ext4::;
6:719GB:725GB:6143MB:linux-swap(v1)::;
4:725GB:750GB:25.2GB:ntfs::;
BYT;
/dev/sdb:31.0GB:scsi:512:512:msdos: USB DISK 2.0;
1:4129kB:31.0GB:31.0GB:fat32::boot, lba;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL MODEL UUID
sda disk 698.7G Hitachi
sda1 part ntfs 100M Réservé au système
C20CE2910CE27FB1
sda2 part ntfs 585.9G B6A400D9A4009DCD
sda3 part 1K
sda4 part ntfs 23.5G swap 33140E3E1297810E
sda5 part ext4 19.1G c6b91238-73ef-475e-813e-98eae73a2f71
sda6 part swap 5.7G 707d3c17-0fcf-4d24-8908-3cd5afa88417
sdb disk 28.9G USB DISK
sdb1 part vfat 28.9G CLE 32 EA86-BCBE
sr0 rom 1024M DVDRAM G
loop0 loop squashfs 953M
KNAME ROTA RO RM STATE MOUNTPOINT
sda 1 0 0 running
sda1 1 0 0 /mnt/boot-sav/sda1
sda2 1 0 0 /mnt/boot-sav/sda2
sda3 1 0 0
sda4 1 0 0
sda5 1 0 0 /mnt/boot-sav/sda5
sda6 1 0 0 [SWAP]
sdb 1 0 1 running
sdb1 1 0 1 /cdrom
sr0 1 0 1 running
loop0 1 1 0 /rofs
=================== mount:
/cow on / type overlayfs (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sdb1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /sys/firmware/efi/efivars type efivarfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=ubuntu)
/dev/sda1 on /mnt/boot-sav/sda1 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda2 on /mnt/boot-sav/sda2 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda5 on /mnt/boot-sav/sda5 type ext4 (rw)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 sda4 sda5 sda6 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fb1 fd full fuse hpet input kmsg kvm log mapper mcelog media0 mei mem net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda4 sda5 sda6 sdb sdb1 sg0 sg1 sg2 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom v4l vfio vga_arbiter vhci vhost-net video0 zero
ls /dev/mapper: control
=================== hexdump -n512 -C /dev/sda1
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 00 00 80 00 80 00 ff 1f 03 00 00 00 00 00 |................|
00000030 55 21 00 00 00 00 00 00 02 00 00 00 00 00 00 00 |U!..............|
00000040 f6 00 00 00 01 00 00 00 b1 7f e2 0c 91 e2 0c c2 |................|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 52 11 16 68 09 00 66 53 66 53 66 |h...hR..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 0a 13 b9 f6 0c fc f3 aa e9 fe 01 90 90 66 60 1e |.............f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a1 f6 01 e8 09 00 |...u...fa.......|
00000170 a1 fa 01 e8 03 00 f4 eb fd 8b f0 ac 3c 00 74 09 |............<.t.|
00000180 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 64 69 |............A di|
00000190 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 6f 63 |sk read error oc|
000001a0 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d 47 52 |curred...BOOTMGR|
000001b0 20 69 73 20 63 6f 6d 70 72 65 73 73 65 64 00 0d | is compressed..|
000001c0 0a 50 72 65 73 73 20 43 74 72 6c 2b 41 6c 74 2b |.Press Ctrl+Alt+|
000001d0 44 65 6c 20 74 6f 20 72 65 73 74 61 72 74 0d 0a |Del to restart..|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 8a 01 a7 01 bf 01 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/sda2
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 28 03 00 |........?....(..|
00000020 00 00 00 00 80 00 80 00 ff e7 3a 49 00 00 00 00 |..........:I....|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 cd 9d 00 a4 d9 00 a4 b6 |................|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 28 10 b9 d8 0f fc f3 aa e9 5f 01 90 90 66 60 1e |(........_...f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a0 f8 01 e8 09 00 |...u...fa.......|
00000170 a0 fb 01 e8 03 00 f4 eb fd b4 01 8b f0 ac 3c 00 |..............<.|
00000180 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 45 72 |t.............Er|
00000190 72 65 75 72 20 6c 65 63 74 75 72 65 20 64 69 73 |reur lecture dis|
000001a0 71 75 65 00 0d 0a 42 4f 4f 54 4d 47 52 20 61 62 |que...BOOTMGR ab|
000001b0 73 65 6e 74 00 0d 0a 42 4f 4f 54 4d 47 52 20 63 |sent...BOOTMGR c|
000001c0 6f 6d 70 72 65 73 73 82 00 0d 0a 43 74 72 6c 2b |ompress....Ctrl+|
000001d0 41 6c 74 2b 53 75 70 70 72 20 70 6f 75 72 20 72 |Alt+Suppr pour r|
000001e0 65 64 82 6d 61 72 72 65 72 0d 0a 00 6f 20 72 65 |ed.marrer...o re|
000001f0 73 74 61 72 74 0d 0a 00 8c a4 b5 c9 00 00 55 aa |start.........U.|
00000200
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/cow overlayfs 3.8G 122M 3.7G 4% /
udev devtmpfs 3.8G 12K 3.8G 1% /dev
tmpfs tmpfs 777M 1.3M 775M 1% /run
/dev/sdb1 vfat 29G 2.0G 27G 7% /cdrom
/dev/loop0 squashfs 953M 953M 0 100% /rofs
none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
tmpfs tmpfs 3.8G 1.2M 3.8G 1% /tmp
none tmpfs 5.0M 4.0K 5.0M 1% /run/lock
none tmpfs 3.8G 412K 3.8G 1% /run/shm
none tmpfs 100M 84K 100M 1% /run/user
/dev/sda1 fuseblk 100M 29M 72M 29% /mnt/boot-sav/sda1
/dev/sda2 fuseblk 586G 82G 505G 14% /mnt/boot-sav/sda2
/dev/sda5 ext4 19G 17G 1.5G 92% /mnt/boot-sav/sda5
=================== fdisk -l:
Disk /dev/sda: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x831f933c
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT
/dev/sda2 206848 1228804095 614298624 7 HPFS/NTFS/exFAT
/dev/sda3 1363972094 1415968767 25998337 5 Extended
Partition 3 does not start on physical sector boundary.
/dev/sda4 1415968768 1465147391 24589312 7 HPFS/NTFS/exFAT
/dev/sda5 1363972096 1403970142 19999023+ 83 Linux
/dev/sda6 1403971584 1415968767 5998592 82 Linux swap / Solaris
Disk /dev/sdb: 31.0 GB, 30992891904 bytes
74 heads, 10 sectors/track, 81801 cylinders, total 60532992 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000db59c
Device Boot Start End Blocks Id System
/dev/sdb1 * 8064 60532991 30262464 c W95 FAT32 (LBA)
=================== Suggested repair
The default repair of the Boot-Repair utility would purge (in order to fix packages fix executable fix legacy files fix customized files) and reinstall the grub2 of sda5 into the MBR of sda.
Additional repair would be performed: unhide-bootmenu-10s
=================== User settings
The settings chosen by the user will not act on the boot.
J'ai désactivé la veille prolongée de windows pour avoir accès au BIOS, j'ai activé UEFI ( sinon impossible de booter sur USB) , et j'ai booté sur mon live USB
Qu'est-ce que tu veux faire en en session live mode UEFI avec Boot-Repair, alors que ton installation est en mode Bios_Legacy ?...
Disque partitionné en mode table de partitions MSDOS (pas de GPT et une partition étendue /sda3). Et tes installations en mode Bios_Legacy.
Pourquoi voit-on aussi un fichier "menu.list" dans ton Ubuntu 15.04? La 15.04 est issue de maj et mise à niveaux successives, depuis une installation d'avant la 9.04 ou 9.10 ?.
menu.list = fichier de configuration de grub legacy.
grub.cfg (que l'on voit aussi dans ton 15.04) = fichier de configuration de grub2 .
sda5: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 15.04
Boot files: /boot/grub/menu.lst /boot/grub/grub.cfg /etc/fstab
/boot/grub/i386-pc/core.img
Stp, veux tu bien relancer une session live en mode Bios_Legacy, et non en UEFI.
j'ai activé UEFI ( sinon impossible de booter sur USB)
Bon , çà risque de poser problème...
@+. Babdu89 .
Dernière modification par Babdu89 (Le 06/08/2015, à 21:27)
J'ai découvert Ubuntu avec la 07.10.... Et alors?!... Depuis je regarde de temps en temps si Windows marche toujours....
Hors ligne
#3 Le 06/08/2015, à 17:22
- quentino18
Re : RÉSOLU - Boot-repair - Problème pour retrouver Grub
Merci de ta réponse
En fait , j'avais ma partition Windows de 650 Go, un swap de 20 Go et Ubuntu environ 20 Go aussi.
La j'ai reinstallé Windows en laissant 50 Go de Rab , donc installé sur 600 Go , pour ensuite garder mon swap mais agrandir la partition Ubuntu de 50 Go.
J'ai installé Ubuntu 14.04 il y a un an puis j'ai mis Windows, et j'ai mis à jour vers Ubuntu 15.04 quand elle est sortie.
Absolument impossible de booter sur la crée Live-USB ( Ubuntu 14.04 créée avec USB-creator) si je désactive le mode UEFI.
Je crois que je m'était déjà cassé la tête avec ça il y a un an ...
Qu'est-ce que je peux faire ? :-(
Graver au pire ?
Ou sinon, reinstaller tout Ubuntu ..... ?
EDIT : J'ai finalement reussi à booter en jouant avec "PXE", aucune idée de ce que c'est mais je poste le rapport dans quelques minutes :-)
EDIT 2 : Voici le nouveau rapport :
Boot Info Script e7fc706 + Boot-Repair extra info [Boot-Info 9Feb2015]
============================= Boot Info Summary: ===============================
=> Windows 7/8/2012 is installed in the MBR of /dev/sda.
=> Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /bootmgr /Boot/BCD
sda2: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 7/2008: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe
sda3: __________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 15.04
Boot files: /boot/grub/menu.lst /boot/grub/grub.cfg /etc/fstab
/boot/grub/i386-pc/core.img
sda6: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sda4: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdb1: __________________________________________________________________________
File system: vfat
Boot sector type: SYSLINUX 4.05 20120131
Boot sector info: Syslinux looks at sector 2080384 of /dev/sdb1 for its
second stage. SYSLINUX is installed in the directory.
No errors found in the Boot Parameter Block.
Operating System:
Boot files: /boot/grub/grub.cfg /syslinux/syslinux.cfg
/casper/vmlinuz.efi /EFI/BOOT/grubx64.efi /ldlinux.sys
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 206,847 204,800 7 NTFS / exFAT / HPFS
/dev/sda2 206,848 1,228,804,095 1,228,597,248 7 NTFS / exFAT / HPFS
/dev/sda3 1,363,972,094 1,415,968,767 51,996,674 5 Extended
/dev/sda5 1,363,972,096 1,403,970,142 39,998,047 83 Linux
/dev/sda6 1,403,971,584 1,415,968,767 11,997,184 82 Linux swap / Solaris
/dev/sda4 1,415,968,768 1,465,147,391 49,178,624 7 NTFS / exFAT / HPFS
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 31.0 GB, 30992891904 bytes
74 heads, 10 sectors/track, 81801 cylinders, total 60532992 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 8,064 60,532,991 60,524,928 c W95 FAT32 (LBA)
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/loop1 9ccc921a-84c8-435a-b0f8-63ac0150f86b ext3
/dev/sda1 C20CE2910CE27FB1 ntfs Réservé au système
/dev/sda2 B6A400D9A4009DCD ntfs
/dev/sda4 33140E3E1297810E ntfs swap
/dev/sda5 c6b91238-73ef-475e-813e-98eae73a2f71 ext4
/dev/sda6 707d3c17-0fcf-4d24-8908-3cd5afa88417 swap
/dev/sdb1 EA86-BCBE vfat CLE 32
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Aug 6 17:27 ata-HL-DT-ST_DVDRAM_GT51N_KZUC1R85237 -> ../../sr0
lrwxrwxrwx 1 root root 9 Aug 6 17:32 ata-Hitachi_HTS547575A9E384_J2140054KA0TGA -> ../../sda
lrwxrwxrwx 1 root root 10 Aug 6 17:32 ata-Hitachi_HTS547575A9E384_J2140054KA0TGA-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Aug 6 17:32 ata-Hitachi_HTS547575A9E384_J2140054KA0TGA-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Aug 6 17:27 ata-Hitachi_HTS547575A9E384_J2140054KA0TGA-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Aug 6 17:27 ata-Hitachi_HTS547575A9E384_J2140054KA0TGA-part4 -> ../../sda4
lrwxrwxrwx 1 root root 10 Aug 6 17:27 ata-Hitachi_HTS547575A9E384_J2140054KA0TGA-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 Aug 6 17:27 ata-Hitachi_HTS547575A9E384_J2140054KA0TGA-part6 -> ../../sda6
lrwxrwxrwx 1 root root 9 Aug 6 17:32 usb-_USB_DISK_2.0_070D3BAA2A416165-0:0 -> ../../sdb
lrwxrwxrwx 1 root root 10 Aug 6 17:27 usb-_USB_DISK_2.0_070D3BAA2A416165-0:0-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 9 Aug 6 17:32 wwn-0x5000cca644eed52f -> ../../sda
lrwxrwxrwx 1 root root 10 Aug 6 17:32 wwn-0x5000cca644eed52f-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Aug 6 17:32 wwn-0x5000cca644eed52f-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Aug 6 17:27 wwn-0x5000cca644eed52f-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Aug 6 17:27 wwn-0x5000cca644eed52f-part4 -> ../../sda4
lrwxrwxrwx 1 root root 10 Aug 6 17:27 wwn-0x5000cca644eed52f-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 Aug 6 17:27 wwn-0x5000cca644eed52f-part6 -> ../../sda6
lrwxrwxrwx 1 root root 9 Aug 6 17:27 wwn-0x5001480000000000 -> ../../sr0
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sdb1 /cdrom vfat (rw,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
=========================== sda5/boot/grub/menu.lst: ===========================
--------------------------------------------------------------------------------
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=c6b91238-73ef-475e-813e-98eae73a2f71 ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=(hostdisk//dev/sda,4)
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 15.04, kernel 3.13.0-36-generic
root (hostdisk//dev/sda,4)
kernel /boot/vmlinuz-3.13.0-36-generic root=UUID=c6b91238-73ef-475e-813e-98eae73a2f71 ro quiet splash
initrd /boot/initrd.img-3.13.0-36-generic
title Ubuntu 15.04, kernel 3.13.0-36-generic (recovery mode)
root (hostdisk//dev/sda,4)
kernel /boot/vmlinuz-3.13.0-36-generic root=UUID=c6b91238-73ef-475e-813e-98eae73a2f71 ro single
initrd /boot/initrd.img-3.13.0-36-generic
title Ubuntu 15.04, memtest86+
root (hostdisk//dev/sda,4)
kernel /boot/memtest86+.bin
### END DEBIAN AUTOMAGIC KERNELS LIST
--------------------------------------------------------------------------------
=========================== sda5/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 c6b91238-73ef-475e-813e-98eae73a2f71
else
search --no-floppy --fs-uuid --set=root c6b91238-73ef-475e-813e-98eae73a2f71
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=-1
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=10
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=10
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-c6b91238-73ef-475e-813e-98eae73a2f71' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 c6b91238-73ef-475e-813e-98eae73a2f71
else
search --no-floppy --fs-uuid --set=root c6b91238-73ef-475e-813e-98eae73a2f71
fi
linux /boot/vmlinuz-3.13.0-36-generic root=UUID=c6b91238-73ef-475e-813e-98eae73a2f71 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-36-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-c6b91238-73ef-475e-813e-98eae73a2f71' {
menuentry 'Ubuntu, avec Linux 3.13.0-36-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-36-generic-advanced-c6b91238-73ef-475e-813e-98eae73a2f71' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 c6b91238-73ef-475e-813e-98eae73a2f71
else
search --no-floppy --fs-uuid --set=root c6b91238-73ef-475e-813e-98eae73a2f71
fi
echo 'Chargement de Linux 3.13.0-36-generic…'
linux /boot/vmlinuz-3.13.0-36-generic root=UUID=c6b91238-73ef-475e-813e-98eae73a2f71 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-36-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-36-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-36-generic-init-upstart-c6b91238-73ef-475e-813e-98eae73a2f71' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 c6b91238-73ef-475e-813e-98eae73a2f71
else
search --no-floppy --fs-uuid --set=root c6b91238-73ef-475e-813e-98eae73a2f71
fi
echo 'Chargement de Linux 3.13.0-36-generic…'
linux /boot/vmlinuz-3.13.0-36-generic root=UUID=c6b91238-73ef-475e-813e-98eae73a2f71 ro quiet splash $vt_handoff init=/sbin/upstart
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-36-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-36-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-36-generic-recovery-c6b91238-73ef-475e-813e-98eae73a2f71' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 c6b91238-73ef-475e-813e-98eae73a2f71
else
search --no-floppy --fs-uuid --set=root c6b91238-73ef-475e-813e-98eae73a2f71
fi
echo 'Chargement de Linux 3.13.0-36-generic…'
linux /boot/vmlinuz-3.13.0-36-generic root=UUID=c6b91238-73ef-475e-813e-98eae73a2f71 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-36-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/10_linux_proxy ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
### END /etc/grub.d/10_linux_proxy ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/30_os-prober_proxy ###
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
set timeout=10
fi
menuentry "Windows 8" --class windows --class os $menuentry_id_option 'osprober-chain-B052753F52750AFC' {
insmod part_msdos
insmod ntfs
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 B052753F52750AFC
else
search --no-floppy --fs-uuid --set=root B052753F52750AFC
fi
parttool ${root} hidden-
drivemap -s (hd0) ${root}
chainloader +1
}
### END /etc/grub.d/30_os-prober_proxy ###
### BEGIN /etc/grub.d/33_linux_proxy ###
menuentry "Ubuntu" --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-c6b91238-73ef-475e-813e-98eae73a2f71' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 c6b91238-73ef-475e-813e-98eae73a2f71
else
search --no-floppy --fs-uuid --set=root c6b91238-73ef-475e-813e-98eae73a2f71
fi
linux /boot/vmlinuz-3.13.0-36-generic root=UUID=c6b91238-73ef-475e-813e-98eae73a2f71 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-36-generic
}
submenu "Options avancées pour Ubuntu"{
menuentry "Ubuntu, avec Linux 3.13.0-36-generic" --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-36-generic-advanced-c6b91238-73ef-475e-813e-98eae73a2f71' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 c6b91238-73ef-475e-813e-98eae73a2f71
else
search --no-floppy --fs-uuid --set=root c6b91238-73ef-475e-813e-98eae73a2f71
fi
echo 'Chargement de Linux 3.13.0-36-generic…'
linux /boot/vmlinuz-3.13.0-36-generic root=UUID=c6b91238-73ef-475e-813e-98eae73a2f71 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-36-generic
}
menuentry "Ubuntu, with Linux 3.13.0-36-generic (recovery mode)" --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-36-generic-recovery-c6b91238-73ef-475e-813e-98eae73a2f71' {
recordfail
load_video
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 c6b91238-73ef-475e-813e-98eae73a2f71
else
search --no-floppy --fs-uuid --set=root c6b91238-73ef-475e-813e-98eae73a2f71
fi
echo 'Chargement de Linux 3.13.0-36-generic…'
linux /boot/vmlinuz-3.13.0-36-generic root=UUID=c6b91238-73ef-475e-813e-98eae73a2f71 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-36-generic
}
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 c6b91238-73ef-475e-813e-98eae73a2f71
else
search --no-floppy --fs-uuid --set=root c6b91238-73ef-475e-813e-98eae73a2f71
fi
knetbsd /boot/memtest86+.elf
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 c6b91238-73ef-475e-813e-98eae73a2f71
else
search --no-floppy --fs-uuid --set=root c6b91238-73ef-475e-813e-98eae73a2f71
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
}
### END /etc/grub.d/33_linux_proxy ###
### BEGIN /etc/grub.d/34_linux_xen ###
### END /etc/grub.d/34_linux_xen ###
### BEGIN /etc/grub.d/35_uefi-firmware ###
### END /etc/grub.d/35_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda5/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda5 during installation
UUID=c6b91238-73ef-475e-813e-98eae73a2f71 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda6 during installation
UUID=707d3c17-0fcf-4d24-8908-3cd5afa88417 none swap sw 0 0
--------------------------------------------------------------------------------
=========================== sdb1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
if loadfont /boot/grub/font.pf2 ; then
set gfxmode=auto
insmod efi_gop
insmod efi_uga
insmod gfxterm
terminal_output gfxterm
fi
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
menuentry "Try Ubuntu without installing" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
initrd /casper/initrd.lz
}
menuentry "Install Ubuntu" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash --
initrd /casper/initrd.lz
}
menuentry "OEM install (for manufacturers)" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true --
initrd /casper/initrd.lz
}
menuentry "Check disc for defects" {
set gfxpayload=keep
linux /casper/vmlinuz.efi boot=casper integrity-check quiet splash --
initrd /casper/initrd.lz
}
--------------------------------------------------------------------------------
========================= sdb1/syslinux/syslinux.cfg: ==========================
--------------------------------------------------------------------------------
# D-I config version 2.0
include menu.cfg
default vesamenu.c32
prompt 0
timeout 50
ui gfxboot bootlogo
--------------------------------------------------------------------------------
============== sdb1: Version of COM32(R) files used by Syslinux: ===============
syslinux/chain.c32 : COM32R module (v4.xx)
syslinux/gfxboot.c32 : COM32R module (v4.xx)
syslinux/vesamenu.c32 : COM32R module (v4.xx)
=============================== StdErr Messages: ===============================
File descriptor 9 (/proc/17107/mounts) leaked on lvs invocation. Parent PID 24649: bash
File descriptor 63 (pipe:[65666]) leaked on lvs invocation. Parent PID 24649: bash
No volume groups found
ADDITIONAL INFORMATION :
=================== log of boot-repair 2015-08-06__17h32 ===================
boot-repair version : 4ppa33
boot-sav version : 4ppa33
glade2script version : 3.2.2~ppa47~saucy
boot-sav-extra version : 4ppa33
boot-repair is executed in live-session (Ubuntu 14.04.2 LTS, trusty, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
noprompt cdrom-detect/try-usb=true persistent file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity
ls: cannot access /home/usr/.config: No such file or directory
=================== os-prober:
/dev/sda1:Windows 7 (loader):Windows:chain
/dev/sda2:Windows 7 (loader):Windows1:chain
/dev/sda5:Ubuntu 15.04 (15.04):Ubuntu:linux
=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/loop1: UUID="9ccc921a-84c8-435a-b0f8-63ac0150f86b" TYPE="ext3"
/dev/sda1: LABEL="RM-CM-)servM-CM-) au systM-CM-(me" UUID="C20CE2910CE27FB1" TYPE="ntfs"
/dev/sda2: UUID="B6A400D9A4009DCD" TYPE="ntfs"
/dev/sda4: LABEL="swap" UUID="33140E3E1297810E" TYPE="ntfs"
/dev/sda5: UUID="c6b91238-73ef-475e-813e-98eae73a2f71" TYPE="ext4"
/dev/sda6: UUID="707d3c17-0fcf-4d24-8908-3cd5afa88417" TYPE="swap"
/dev/sdb1: LABEL="CLE 32" UUID="EA86-BCBE" TYPE="vfat"
1 disks with OS, 3 OS : 1 Linux, 0 MacOS, 2 Windows, 0 unknown type OS.
Warning: extended partition does not start at a cylinder boundary.
DOS and Linux will interpret the contents differently.
=================== sda5/etc/grub.d/ :
drwxr-xr-x 5 root root 4096 Aug 6 16:01 grub.d
drwxr-xr-x 2 root root 4096 Jul 22 2014 grub.d.ori
total 40
-rwxr-xr-x 1 root root 706 Sep 26 2014 10_linux_proxy
-rwxr-xr-x 1 root root 211 Sep 26 2014 30_os-prober_proxy
-rwxr-xr-x 1 root root 1292 Sep 26 2014 33_linux_proxy
-rwxr-xr-x 1 root root 10412 May 15 2014 34_linux_xen
-rwxr-xr-x 1 root root 1416 May 15 2014 35_uefi-firmware
drwxr-xr-x 4 root root 4096 Sep 26 2014 backup
drwxr-xr-x 2 root root 4096 Sep 26 2014 bin
drwxr-xr-x 2 root root 4096 Sep 26 2014 proxifiedScripts
=================== sda5/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
=================== sda5saved_entry=0/grub/grubenv :
saved_entry=0
/mnt/boot-sav/sda5/boot/grub/menu.lst detected
=================== UEFI/Legacy mode:
This live-session is not in EFI-mode.
SecureBoot maybe enabled.
=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, bootmgr, is-winboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda1.
sda2 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, bootmgr, is-winboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda2.
sda5 : sda, not-sepboot, grubenv-ng nogrub, no-docgrub, no-update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, nogrubinstall, with--usr, fstab-without-usr, not-sep-usr, customized, farbios, /mnt/boot-sav/sda5.
sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 2048 sectors * 512 bytes
=================== parted -l:
Model: ATA Hitachi HTS54757 (scsi)
Disk /dev/sda: 750GB
Sector size (logical/physical): 512B/4096B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 106MB 105MB primary ntfs boot
2 106MB 629GB 629GB primary ntfs
3 698GB 725GB 26.6GB extended
5 698GB 719GB 20.5GB logical ext4
6 719GB 725GB 6143MB logical linux-swap(v1)
4 725GB 750GB 25.2GB primary ntfs
Model: USB DISK 2.0 (scsi)
Disk /dev/sdb: 31.0GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 4129kB 31.0GB 31.0GB primary fat32 boot, lba
=================== parted -lm:
BYT;
/dev/sda:750GB:scsi:512:4096:msdos:ATA Hitachi HTS54757;
1:1049kB:106MB:105MB:ntfs::boot;
2:106MB:629GB:629GB:ntfs::;
3:698GB:725GB:26.6GB:::;
5:698GB:719GB:20.5GB:ext4::;
6:719GB:725GB:6143MB:linux-swap(v1)::;
4:725GB:750GB:25.2GB:ntfs::;
BYT;
/dev/sdb:31.0GB:scsi:512:512:msdos: USB DISK 2.0;
1:4129kB:31.0GB:31.0GB:fat32::boot, lba;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL MODEL UUID
sda disk 698.7G Hitachi
sda1 part ntfs 100M Réservé au système
C20CE2910CE27FB1
sda2 part ntfs 585.9G B6A400D9A4009DCD
sda3 part 1K
sda4 part ntfs 23.5G swap 33140E3E1297810E
sda5 part ext4 19.1G c6b91238-73ef-475e-813e-98eae73a2f71
sda6 part swap 5.7G 707d3c17-0fcf-4d24-8908-3cd5afa88417
sdb disk 28.9G USB DISK
sdb1 part vfat 28.9G CLE 32 EA86-BCBE
sr0 rom 1024M DVDRAM G
loop0 loop squashfs 953M
loop1 loop ext3 1G 9ccc921a-84c8-435a-b0f8-63ac0150f86b
KNAME ROTA RO RM STATE MOUNTPOINT
sda 1 0 0 running
sda1 1 0 0 /mnt/boot-sav/sda1
sda2 1 0 0 /mnt/boot-sav/sda2
sda3 1 0 0
sda4 1 0 0
sda5 1 0 0 /mnt/boot-sav/sda5
sda6 1 0 0 [SWAP]
sdb 1 0 1 running
sdb1 1 0 1 /cdrom
sr0 1 0 1 running
loop0 1 1 0 /rofs
loop1 1 0 0
=================== mount:
/cow on / type overlayfs (rw)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
/dev/sdb1 on /cdrom type vfat (rw,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=ubuntu)
/dev/sda1 on /mnt/boot-sav/sda1 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda2 on /mnt/boot-sav/sda2 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda5 on /mnt/boot-sav/sda5 type ext4 (rw)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 sda4 sda5 sda6 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fb1 fd full fuse hpet input kmsg kvm log mapper mcelog media0 mei mem net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda4 sda5 sda6 sdb sdb1 sg0 sg1 sg2 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom v4l vfio vga_arbiter vhci vhost-net video0 zero
ls /dev/mapper: control
=================== hexdump -n512 -C /dev/sda1
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 00 00 80 00 80 00 ff 1f 03 00 00 00 00 00 |................|
00000030 55 21 00 00 00 00 00 00 02 00 00 00 00 00 00 00 |U!..............|
00000040 f6 00 00 00 01 00 00 00 b1 7f e2 0c 91 e2 0c c2 |................|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 52 11 16 68 09 00 66 53 66 53 66 |h...hR..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 0a 13 b9 f6 0c fc f3 aa e9 fe 01 90 90 66 60 1e |.............f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a1 f6 01 e8 09 00 |...u...fa.......|
00000170 a1 fa 01 e8 03 00 f4 eb fd 8b f0 ac 3c 00 74 09 |............<.t.|
00000180 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 64 69 |............A di|
00000190 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 6f 63 |sk read error oc|
000001a0 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d 47 52 |curred...BOOTMGR|
000001b0 20 69 73 20 63 6f 6d 70 72 65 73 73 65 64 00 0d | is compressed..|
000001c0 0a 50 72 65 73 73 20 43 74 72 6c 2b 41 6c 74 2b |.Press Ctrl+Alt+|
000001d0 44 65 6c 20 74 6f 20 72 65 73 74 61 72 74 0d 0a |Del to restart..|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 8a 01 a7 01 bf 01 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/sda2
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 28 03 00 |........?....(..|
00000020 00 00 00 00 80 00 80 00 ff e7 3a 49 00 00 00 00 |..........:I....|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 cd 9d 00 a4 d9 00 a4 b6 |................|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 28 10 b9 d8 0f fc f3 aa e9 5f 01 90 90 66 60 1e |(........_...f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a0 f8 01 e8 09 00 |...u...fa.......|
00000170 a0 fb 01 e8 03 00 f4 eb fd b4 01 8b f0 ac 3c 00 |..............<.|
00000180 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 45 72 |t.............Er|
00000190 72 65 75 72 20 6c 65 63 74 75 72 65 20 64 69 73 |reur lecture dis|
000001a0 71 75 65 00 0d 0a 42 4f 4f 54 4d 47 52 20 61 62 |que...BOOTMGR ab|
000001b0 73 65 6e 74 00 0d 0a 42 4f 4f 54 4d 47 52 20 63 |sent...BOOTMGR c|
000001c0 6f 6d 70 72 65 73 73 82 00 0d 0a 43 74 72 6c 2b |ompress....Ctrl+|
000001d0 41 6c 74 2b 53 75 70 70 72 20 70 6f 75 72 20 72 |Alt+Suppr pour r|
000001e0 65 64 82 6d 61 72 72 65 72 0d 0a 00 6f 20 72 65 |ed.marrer...o re|
000001f0 73 74 61 72 74 0d 0a 00 8c a4 b5 c9 00 00 55 aa |start.........U.|
00000200
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
/cow overlayfs 976M 151M 775M 17% /
udev devtmpfs 3.8G 12K 3.8G 1% /dev
tmpfs tmpfs 777M 1.3M 775M 1% /run
/dev/sdb1 vfat 29G 2.0G 27G 7% /cdrom
/dev/loop0 squashfs 953M 953M 0 100% /rofs
none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
tmpfs tmpfs 3.8G 1.2M 3.8G 1% /tmp
none tmpfs 5.0M 4.0K 5.0M 1% /run/lock
none tmpfs 3.8G 76K 3.8G 1% /run/shm
none tmpfs 100M 60K 100M 1% /run/user
/dev/sda1 fuseblk 100M 29M 72M 29% /mnt/boot-sav/sda1
/dev/sda2 fuseblk 586G 82G 505G 14% /mnt/boot-sav/sda2
/dev/sda5 ext4 19G 17G 1.5G 92% /mnt/boot-sav/sda5
=================== fdisk -l:
Disk /dev/sda: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x831f933c
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT
/dev/sda2 206848 1228804095 614298624 7 HPFS/NTFS/exFAT
/dev/sda3 1363972094 1415968767 25998337 5 Extended
Partition 3 does not start on physical sector boundary.
/dev/sda4 1415968768 1465147391 24589312 7 HPFS/NTFS/exFAT
/dev/sda5 1363972096 1403970142 19999023+ 83 Linux
/dev/sda6 1403971584 1415968767 5998592 82 Linux swap / Solaris
Disk /dev/sdb: 31.0 GB, 30992891904 bytes
74 heads, 10 sectors/track, 81801 cylinders, total 60532992 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000db59c
Device Boot Start End Blocks Id System
/dev/sdb1 * 8064 60532991 30262464 c W95 FAT32 (LBA)
=================== Suggested repair
The default repair of the Boot-Repair utility would purge (in order to fix packages fix executable fix legacy files fix customized files) and reinstall the grub2 of sda5 into the MBR of sda.
Additional repair would be performed: unhide-bootmenu-10s
=================== User settings
The settings chosen by the user will not act on the boot.
Dernière modification par quentino18 (Le 06/08/2015, à 17:34)
Hors ligne
#4 Le 06/08/2015, à 21:19
- jibel
Re : RÉSOLU - Boot-repair - Problème pour retrouver Grub
@ quentino18,
Certainement que babdu89 va te proposer la solution pour te dépatouiller de ces PBs..... Seulement, si je peux me permettre, tu as fais une bonne salade niçoise ....Normalement tu aurais du "réduire" les 750 Go du DD en deux, 350Go pour windows 8 puis 300 Go pour linux tout ça a partir de "gérer" le DD dans windows 8........
Tu aurais eu deux partitions saines W$ 8 et GNU-linux indépendantes ensuite tu aurais pu créer, dans la partition réservée a Linux, une partition étendue de 300Go, dans cette partition, il aurait fallu créer une partition de 15 Go pour / système puis une de +/-30Go /home et pour la swap de +/- 10Go
pas plus. Et tu lance ton installation a partir de ta clé USB ou d'un Live CD/DVD. les partitions seront visibles lors de l'installation........
Ce qui aurait du donner a peu près ceci:
SDa 1 W$ 8 350Go ( p't'êt que tu aurait pu y coller W$10 a coté de W$8 ??
======= il y aurait eu une séparation entre W$ et ubuntu, chacun chez soit le choix au démarrage entre W$8 et UB. 14.04
Partition étendue de 300Go linux/ubuntu..............(dans laquelle tu pourrais tester un autre OS, il y a de la place)
SDa X ubuntu 14.04 / systeme 15Go
SDa X ubuntu 14.04 /home +/- 30Go
Sda X swap de 10 Go maxi ......
D'après ce que tu dis, tu as installe en dualboot a coté de W8 ! ! W10 qui n'est pas encore sortis, seulement en SEPT. ou OCT. pour le moment W10 est " offert gratuit" après ça sera un autre PB
Tu as installé ubuntu 14.04 puis la 15.04 en faisant une MàJ...... Ah bon? perso je ne fais jamais ça, trop de risque ensuite de PB l'idéal aurait été d'installer au propre la 15.04 dans les "traces" de la 14.04 pour qu'il n'y ai pas de PB ensuite au
démarrage
(tout ceci si tu avais d'abord fait le bon partitionnement de ton Disque Dur)
Peut-être qu'une bonne réinstalle ferait l'affaire ? non? Faut attendre ce que va te conseiller babdu89 qui est le plus a même de trouver la bonne soluce , Bon courage,
Dernière modification par jibel (Le 06/08/2015, à 21:28)
Plus grande est la face, plus grand est le dos!
Toutes les fautes de frappe, d'orthographe, de grammaire et de syntaxe ci-dessus, sont la propriété intellectuelle de l'auteur. Elles doivent être reproduites et même corrigées sans l'accord préalable du susdit et toc !
Mint 21.1,Voyager20.04 et 22.04,Ubuntu 22.04,Emmabuntus 1.Buster, Debian 12.buster, Hybryde 14.04, Pas d'OS intermédiaire ! PC Medion AKOYA DD 1T + 2 .
Hors ligne
#5 Le 06/08/2015, à 21:52
- Babdu89
Re : RÉSOLU - Boot-repair - Problème pour retrouver Grub
Bonsoir.
Alors là!!!. J'avais zappé çà!...
Post#1 on lit;
Suite à l'arrivée de WIndows 10 et au presque décès de mon windows 8, j'ai décidé de l'installer.
J'avais avant un dual boot via grub qui me permettait de chosir entre les deux.
J'ai donc installé windows 10 sur la partition windows, sauf que il n'y a plus moyen d'afficher grub au démarrage.
Puis dans les boot info on voit;
============================= Boot Info Summary: ===============================
=> Windows 7/8/2012 is installed in the MBR of /dev/sda.
Normal que çà ne démarre plus sur Grub...
La réinstallation de Windows10 . Le MBR Windows a écrasé la première partie de Grub qui devrait être installée dans le secteur de boot du hdd /dev/sda.
Alors. En session live, avec Boot-Repair il faut réinstaller Grub sur la 15.04 .
On peut utiliser la réparation recommandée, elle propose ceci.
=================== Suggested repair
The default repair of the Boot-Repair utility would purge (in order to fix packages fix executable fix legacy files fix customized files) and reinstall the grub2 of sda5 into the MBR of sda.
Additional repair would be performed: unhide-bootmenu-10s
Ou passer par les "Options avancées" de Boot-Repair.
Onglet "Options principales" cocher "Réinstaller Grub."
Onglet "Emplacement de grub"
Pour "Os par défaut au démarrage" , indiquer ; sda5 Ubuntu 15.04
Pour "Placer Grub dans " cocher et indiquer; /sda
Faire "Appliquer".
Poster l'URL du boot info, et dire si çà remarche.
Et que l'on vérifie si subsiste encore le fichier "menu.list " dont je ne comprends toujours pas la présence dans la 15.04. démarrée par un Grub2.
@+. Babdu89 .
J'ai découvert Ubuntu avec la 07.10.... Et alors?!... Depuis je regarde de temps en temps si Windows marche toujours....
Hors ligne
#6 Le 06/08/2015, à 21:55
- quentino18
Re : RÉSOLU - Boot-repair - Problème pour retrouver Grub
@jibel:
Oui, pour le partitionnement, c'est exactement ce que je voulais faire à la base, sauf mon mon W8 est décédé depuis plusieurs mois, le disque était toujours à 100%, à transférer des données je ne sais où pour "system", et d'autres trucs, à priori un problème connu avec Windows update, sauf que malgré les dizaines de correctifs que j'ai essayé d'appliquer, impossible de régler le problème, je ne pouvais réduire que de 57 mo alors qu'il y avait 180 Go de dispo...
Bref, effectivement, c'est caca ce que j'ai fait, mais je n'ai plus trop le choix maintenant.
W10 est un choix, je sais que je pourrais obtenir des clés quand elles seront disponibles.
J'ai passé tellement de temps à installer des choses sur Ubuntu pour les cours et les projets que j'ai vraiment pas envie de repartir de 0...
Merci pour ta réponse en tout cas :-)
@babdu89:
Ben oui j'ai fait ça... ^^
Qu'est ce que j'aurai du faire ? :X
Merci de m'éduquer :-D
Le "recommandé" ne résout rien sur boot repair.
Je vais voir si ça résout le problème avec ce que tu proposes ensuite
Édit : je précise que j'ai réinstallé W7 puis fait la mise à hour vers W10
Dernière modification par quentino18 (Le 06/08/2015, à 22:02)
Hors ligne
#7 Le 06/08/2015, à 22:06
- jibel
Re : RÉSOLU - Boot-repair - Problème pour retrouver Grub
@Babdu89,
J'avais vu ça l'histoire de W$10 a coté de W$8 sans en voir exactement le PB , avec tes explications on peut comprendre mieux ce qu'il se passe...... J'avais pensé a faire un "options avancées" de boot-repair pour coller le grub dans la 15.04 ça devrait ??? être OK Non?
placer toujours le grub a sa place en Sda, la ubuntu 15.04 devrait s'afficher dans le choix, en principe il devrait être le seul...........
Plus grande est la face, plus grand est le dos!
Toutes les fautes de frappe, d'orthographe, de grammaire et de syntaxe ci-dessus, sont la propriété intellectuelle de l'auteur. Elles doivent être reproduites et même corrigées sans l'accord préalable du susdit et toc !
Mint 21.1,Voyager20.04 et 22.04,Ubuntu 22.04,Emmabuntus 1.Buster, Debian 12.buster, Hybryde 14.04, Pas d'OS intermédiaire ! PC Medion AKOYA DD 1T + 2 .
Hors ligne
#8 Le 06/08/2015, à 22:15
- jibel
Re : RÉSOLU - Boot-repair - Problème pour retrouver Grub
C'est probablement la soluce ouvre boot-repair puisque tu l'as et tente ce qu'a conseillé Babdu89
'Le "recommandé" ne résout rien sur boot repair.
Fallait d'abord commencer par les "options avancées" placer grub a la bonne place, créer un boot-info apres cette manip jamais tenter une réparation recommandées sans savoir ce qui va se passer ......
Plus grande est la face, plus grand est le dos!
Toutes les fautes de frappe, d'orthographe, de grammaire et de syntaxe ci-dessus, sont la propriété intellectuelle de l'auteur. Elles doivent être reproduites et même corrigées sans l'accord préalable du susdit et toc !
Mint 21.1,Voyager20.04 et 22.04,Ubuntu 22.04,Emmabuntus 1.Buster, Debian 12.buster, Hybryde 14.04, Pas d'OS intermédiaire ! PC Medion AKOYA DD 1T + 2 .
Hors ligne
#9 Le 06/08/2015, à 22:18
- quentino18
Re : RÉSOLU - Boot-repair - Problème pour retrouver Grub
Je réessaye donc avec boot-repair , j'ai vérifié les option recommandé dans option avancés, c'était déjà bon.
Je vous précise aussi que quand je démarre, c'est donc windows qui démarre mais je pense que ça c'est clair.( au cas ou :-) )
Je vous dit le résultat dans 3 minutes
ÉDIT : ÇA MARCHE ! :-)
Je ne sais pas du tout ce qui a changé par rapport à avant mais c'est bon :-)
Je vais voir pour me dépatouiller avec ce que j'ai fait maintenant.
Merci beaucoup !
Dernière modification par quentino18 (Le 06/08/2015, à 22:22)
Hors ligne
#10 Le 06/08/2015, à 22:42
- jibel
Re : RÉSOLU - Boot-repair - Problème pour retrouver Grub
@quentino18,
voila ce que tu doit voir quand tu ouvre "option avancées" dans boot-repair
http://pix.toile-libre.org/?img=1438893398.png
j'ai vérifié les option recommandé dans option avancés
il n'y a pas d'options recommandées dans options avancées
oublie les réparations recommandées et place le grub a la place comme OS par défaut au démarrage
Fais comme sur le screen ou tu vois Sda 8 clique sur la flèche \/ en principe tu dois y voir ubuntu 15.04 et W$10
choisi 15.04 ubuntu comme OS par defaut au démarrage...... Si tout se passe bien au démarrage c'est ubuntu 15.04
qui sera en tête de liste........ Sinon c'est autre chose ........hélas, comme problème
Dernière modification par jibel (Le 06/08/2015, à 22:51)
Plus grande est la face, plus grand est le dos!
Toutes les fautes de frappe, d'orthographe, de grammaire et de syntaxe ci-dessus, sont la propriété intellectuelle de l'auteur. Elles doivent être reproduites et même corrigées sans l'accord préalable du susdit et toc !
Mint 21.1,Voyager20.04 et 22.04,Ubuntu 22.04,Emmabuntus 1.Buster, Debian 12.buster, Hybryde 14.04, Pas d'OS intermédiaire ! PC Medion AKOYA DD 1T + 2 .
Hors ligne
#11 Le 07/08/2015, à 09:09
- Babdu89
Re : RÉSOLU - Boot-repair - Problème pour retrouver Grub
Bonjour.
@quentino18 .
Si grub est réparé comme il faut en passant par les Options avancées de Boot-Repair...
Stp, veux tu bien faire un boot-Info en installant Boot-Repair dans ta session de travail?.
Il fonctionne aussi bien en live qu'en installé. Et poster l'URL du boot info ici?. Merci.
@+. Babdu89 .
J'ai découvert Ubuntu avec la 07.10.... Et alors?!... Depuis je regarde de temps en temps si Windows marche toujours....
Hors ligne