Pages : 1
#1 Le 07/02/2016, à 04:13
- jm69_fr
Xubuntu lent sur compaq 15-h003sf
bonjour à tous,
depuis l'install (et la réinstall complète récente) de Xubuntu sur cette machine, ca rame pas mal... exemple le plus frappant : 33 secondes entre le clic sur "arreter" et la fenetre proposant arret, reboot... Firefox affiche les pages pas trop mal, mais c'est qd même bcp plus lent que sur d'autres machines (+puissante il est vrai). Lancement de thunderbird 15s (c'est supportable).
Je précise que le besoin est basique, pas de soft lourd à faire tourner, juste bureautique... Le plus bete c'est que le pc reste souvent allumé sur la fenetre proposant de l'eteindre !
Resultat de sysinfo :
System information report, generated by Sysinfo: 07/02/2016 03:10:41
http://sourceforge.net/projects/gsysinfo
SYSTEM INFORMATION
Running Ubuntu Linux, the Ubuntu 14.04 (trusty) release.
GNOME: unknown (unknown)
Kernel version: 3.13.0-77-generic (#121-Ubuntu SMP Wed Jan 20 10:50:42 UTC 2016)
GCC: 4.8 (x86_64-linux-gnu)
Xorg: 1.15.1 (12 February 2015 02:49:29PM) (12 February 2015 02:49:29PM) (12 February 2015 02:49:29PM)
Hostname: nicole-Compaq-15-Notebook-PC
Uptime: 0 days 0 h 46 min
CPU INFORMATION
AuthenticAMD, AMD E1-2100 APU with Radeon(TM) HD Graphics
Number of CPUs: 2
CPU clock currently at 1000.000 MHz with 1024 KB cache
Numbering: family(22) model(0) stepping(1)
Bogomips: 1996.38
Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc extd_apicid aperfmperf eagerfpu pni pclmulqdq monitor ssse3 cx16 sse4_1 sse4_2 movbe popcnt aes xsave avx f16c lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt topoext perfctr_nb perfctr_l2 arat xsaveopt hw_pstate proc_feedback npt lbrv svm_lock nrip_save tsc_scale flushbyasid decodeassists pausefilter pfthreshold vmmcall bmi1
MEMORY INFORMATION
Total memory: 1703 MB
Total swap: 1743 MB
STORAGE INFORMATION
SCSI device - scsi0
Vendor: ATA
Model: WDC WD5000LPVX-6
SCSI device - scsi1
Vendor: hp
Model: DVDRAM GU90N
SCSI device - scsi2
Vendor: Philips
Model: USB Flash Drive
HARDWARE INFORMATION
MOTHERBOARD
Host bridge
Advanced Micro Devices, Inc. [AMD] Family 16h Processor Function 5
Subsystem: Hewlett-Packard Company Device 21f7
PCI bridge(s)
Advanced Micro Devices, Inc. [AMD] Family 16h Processor Functions 5:1 (prog-if 00 [Normal decode])
Advanced Micro Devices, Inc. [AMD] Family 16h Processor Functions 5:1 (prog-if 00 [Normal decode])
Advanced Micro Devices, Inc. [AMD] Family 16h Processor Functions 5:1 (prog-if 00 [Normal decode])
Advanced Micro Devices, Inc. [AMD] Family 16h Processor Functions 5:1 (prog-if 00 [Normal decode])
Advanced Micro Devices, Inc. [AMD] Family 16h Processor Functions 5:1 (prog-if 00 [Normal decode])
Advanced Micro Devices, Inc. [AMD] Family 16h Processor Functions 5:1 (prog-if 00 [Normal decode])
Advanced Micro Devices, Inc. [AMD] Family 16h Processor Functions 5:1 (prog-if 00 [Normal decode])
Advanced Micro Devices, Inc. [AMD] Family 16h Processor Functions 5:1 (prog-if 00 [Normal decode])
Advanced Micro Devices, Inc. [AMD] Family 16h Processor Functions 5:1 (prog-if 00 [Normal decode])
Advanced Micro Devices, Inc. [AMD] Family 16h Processor Functions 5:1 (prog-if 00 [Normal decode])
Advanced Micro Devices, Inc. [AMD] Family 16h Processor Functions 5:1 (prog-if 00 [Normal decode])
Advanced Micro Devices, Inc. [AMD] Family 16h Processor Functions 5:1 (prog-if 00 [Normal decode])
ISA bridge
Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11)
Subsystem: Hewlett-Packard Company Device 21f7
GRAPHIC CARD
VGA controller
Advanced Micro Devices, Inc. [AMD/ATI] Kabini [Radeon HD 8210] (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device 21f7
SOUND CARD
Multimedia controller
Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 02)
Subsystem: Hewlett-Packard Company Device 21f7
NETWORK
Network controller
Qualcomm Atheros AR9485 Wireless Network Adapter (rev 01)
Subsystem: Hewlett-Packard Company AR9485/HB125 802.11bgn 1×1 Wi-Fi Adapter
Ethernet controller
Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 07)
Subsystem: Hewlett-Packard Company Device 21f7si qq'un a une idée pour améliorer tout ça, par avance, merci !
Hors ligne
#2 Le 07/02/2016, à 06:29
- moko138
Re : Xubuntu lent sur compaq 15-h003sf
Avec 1,7 Gio, tu serais mieux avec Lubuntu qu'avec Xubuntu.
- -
0) Un peu de nettoyage (à renouveler régulièrement)
sudo apt-get clean
sudo apt-get autoremove - -
1) Si le retour de
cat /proc/sys/vm/swappinessest "60",
abaisse-le à 5 comme ceci:
echo vm.swappiness=5 | sudo tee -a /etc/sysctl.confpuis tu redémarres.
- -
2) Pour éviter que firefox laisse tourner des tas de trucs inutiles et indiscrets, installe l'extension noscript
et paramètre-la comme indiqué là ./viewtopic.php?pid=18711521#p18711521 et là ./viewtopic.php?pid=20506971#p20506971 (et dans les messages suivants).
- -
3) Pour éviter que le lourd flashplayer accapare tes ressources,
3.1) installe le paquet gecko-mediaplayer,
l'extension greasemonkey, pour firefox (et chaque navigateur pour lequel elle serait disponible),
puis, disponibles sur isebaro.com, les deux scripts viewtube et viewtube+ (cliquer sur leurs flèches bleues).
3.2) Dans youtube, demande à activer l'html5.
- -
4) Puisque tu as 1,7 Gio de ram, fuis comme la peste chrome et même chromium.
- -
Si jamais ta bécane continue de se montrer poussive, tu nous copieras-colleras, quand elle rame, le retour de
top -d 12en tapant successivement "M" et "P" (en majuscules !).
Dernière modification par moko138 (Le 07/02/2016, à 06:33)
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#3 Le 07/02/2016, à 10:18
- nam1962
Re : Xubuntu lent sur compaq 15-h003sf
Normalement avec 1.7Go une Xub doit fonctionner correctement , encore mieux avec ces réglages.
Maintenant avec une Xub 32bits ça le fera encore mieux !
[ Modéré ]
Hors ligne
#4 Le 07/02/2016, à 11:32
- moko138
Re : Xubuntu lent sur compaq 15-h003sf
Ah oui, exact ! Que retourne
uname -mDernière modification par moko138 (Le 07/02/2016, à 11:33)
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#5 Le 07/02/2016, à 11:54
- jm69_fr
Re : Xubuntu lent sur compaq 15-h003sf
Bonjour et merci pour toutes ces précisions.
@moko138,
Je les ai appliquées"à peu près à la lettre" (!) (càd tout sauf la fin des messages de "....et là ./viewtopic.php?pid=20506971#p20506971 (et dans les messages suivants)." )
ca rame pareil, pas moyen de voir un bete diaporama php se dérouler, des pages web (dont celle du forum) dont on aperçoit furtivement la version non mise en page - ET et toujours l'arret de la machine qui se pointe au bout de 32s (rien à voir avec le browser donc).
voici qd même le "top M P" :
top - 10:44:46 up 38 min, 2 users, load average: 0,54, 1,59, 2,32
Tasks: 154 total, 2 running, 151 sleeping, 0 stopped, 1 zombie
%Cpu(s): 22,2 us, 4,2 sy, 0,0 ni, 70,8 id, 2,8 wa, 0,0 hi, 0,0 si, 0,0 st
KiB Mem: 1743980 total, 771856 used, 972124 free, 10288 buffers
KiB Swap: 1785852 total, 300956 used, 1484896 free. 159024 cached Mem
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
2193 nicole 20 0 2551944 46636 24584 R 25,8 2,7 2:39.71 software-c+
1136 root 20 0 358396 44928 21288 S 21,8 2,6 4:29.12 Xorg
1975 nicole 20 0 1666784 293696 28444 S 5,4 16,8 11:20.97 firefox
3554 nicole 20 0 32144 696 324 R 1,4 0,0 0:01.49 top
3557 root 20 0 0 0 0 S 1,4 0,0 0:00.86 kworker/u8+
1 root 20 0 33752 2032 744 S 0,0 0,1 0:04.10 init
2 root 20 0 0 0 0 S 0,0 0,0 0:00.00 kthreadd
3 root 20 0 0 0 0 S 0,0 0,0 0:00.11 ksoftirqd/0
5 root 0 -20 0 0 0 S 0,0 0,0 0:00.00 kworker/0:+
7 root 20 0 0 0 0 S 0,0 0,0 0:08.32 rcu_sched
8 root 20 0 0 0 0 S 0,0 0,0 0:02.25 rcuos/0
9 root 20 0 0 0 0 S 0,0 0,0 0:03.50 rcuos/1
10 root 20 0 0 0 0 S 0,0 0,0 0:00.00 rcuos/2
11 root 20 0 0 0 0 S 0,0 0,0 0:00.00 rcuos/3
12 root 20 0 0 0 0 S 0,0 0,0 0:00.00 rcu_bh
13 root 20 0 0 0 0 S 0,0 0,0 0:00.00 rcuob/0
14 root 20 0 0 0 0 S 0,0 0,0 0:00.00 rcuob/1 j'essaierai lubuntu des que possible en live usb pour voir
@ nam1962 &moko
oui c'est bien une
x86_64alors pourquoi s'emm.. a installer une 64b si la 32 va plus vite ? pour des applis n'existant qu'en 64b ? à priori pour ce PC d'usage basique, tout doit encore exister en 32...
Encore une fois, cet arret hyper long m'agace. De même que le plantage (écran noir, extinction forcée) qd on replie l'écran.
Allez, je tente la live ubuntu, sait-on jamais.
Merci pour tout
Hors ligne
#6 Le 07/02/2016, à 12:18
- nam1962
Re : Xubuntu lent sur compaq 15-h003sf
Pour la Lubuntu, même conseil : 32 bits (je n'ai à ce stade pas vraiment vu de problèmes chez mes installés avec petite RAM)
Donne aussi
dmsegEt la liste de tes extensions FF & TB
Dernière modification par nam1962 (Le 07/02/2016, à 12:20)
[ Modéré ]
Hors ligne
#7 Le 07/02/2016, à 12:45
- moko138
Re : Xubuntu lent sur compaq 15-h003sf
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
2193 nicole 20 0 2551944 46636 24584 R 25,8 2,7 2:39.71 software-c+ Ferme ce "software-center" (=la logithèque) dès que tu as fini de t'en servir : tu vois bien qu'au moment de ton copier-coller, il te bouffait un gros quart (25,8%) de ton processeur !
--------------
D'autre part j'attends l'autre moitié du retour : tape M dans la fenêtre de top -d 12. Merci.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#8 Le 07/02/2016, à 12:50
- nam1962
Re : Xubuntu lent sur compaq 15-h003sf
Hmm, il sera aussi intéressant de regarder du côté des pilotes graphiques (j'ai déjà vu des interactions coupables avec FF).
Un test des pilotes Oibaf pourra être judicieux.
[ Modéré ]
Hors ligne
#9 Le 07/02/2016, à 13:00
- moko138
Re : Xubuntu lent sur compaq 15-h003sf
nam1962 t'expliquera mieux que moi pourquoi la 32 bits sera plus rapide avec 1,7 Go de ram que ta 64 bits.
Lui ne jure que par Xubuntu.
Moi je te signale que chez moi (libreoffice compris)
- Lubuntu démarre en 42 secondes, et occupe 3.0 Gio
- Xubuntu démarre en 62 secondes, et occupe 4.2 Gio.
Alors à mes yeux, avec 1.7 gigas, il n'y a pas à hésiter, télécharge Lubuntu 14.04 en 32 bits, par exemple là :
cdimage.ubuntu.com/lubuntu/releases/trusty/release/lubuntu-14.04.1-desktop-i386.iso
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#10 Le 07/02/2016, à 13:19
- nam1962
Re : Xubuntu lent sur compaq 15-h003sf
[ Modéré ]
Hors ligne
#11 Le 08/02/2016, à 11:36
- jm69_fr
Re : Xubuntu lent sur compaq 15-h003sf
me revoilà mais pas longtempsd, bcp de boulot cette semaine)
@nam1962
dmesg (1000 lignes !!):
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.0-77-generic (buildd@lcy01-30) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #121-Ubuntu SMP Wed Jan 20 10:50:42 UTC 2016 (Ubuntu 3.13.0-77.121-generic 3.13.11-ckt32)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-77-generic.efi.signed root=UUID=d3e525e6-5935-4106-ab47-22af96bf2052 ro ipv6.disable=1 quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000006dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000006e000-0x000000000006ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000000070000-0x0000000000087fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006d17efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000006d17f000-0x000000006d97efff] type 20
[ 0.000000] BIOS-e820: [mem 0x000000006d97f000-0x000000006e97efff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000006e97f000-0x000000006eb7efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000006eb7f000-0x000000006ebfefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000006ebff000-0x000000006ebfffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000006ec00000-0x000000007effffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by INSYDE Corp.
[ 0.000000] efi: ACPI=0x6ebfe000 ACPI 2.0=0x6ebfe014 SMBIOS=0x6e97ef98
[ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB)
[ 0.000000] efi: mem01: type=7, attr=0xf, range=[0x0000000000001000-0x000000000000e000) (0MB)
[ 0.000000] efi: mem02: type=3, attr=0xf, range=[0x000000000000e000-0x0000000000010000) (0MB)
[ 0.000000] efi: mem03: type=7, attr=0xf, range=[0x0000000000010000-0x000000000002e000) (0MB)
[ 0.000000] efi: mem04: type=3, attr=0xf, range=[0x000000000002e000-0x000000000002f000) (0MB)
[ 0.000000] efi: mem05: type=4, attr=0xf, range=[0x000000000002f000-0x0000000000030000) (0MB)
[ 0.000000] efi: mem06: type=3, attr=0xf, range=[0x0000000000030000-0x000000000006e000) (0MB)
[ 0.000000] efi: mem07: type=10, attr=0xf, range=[0x000000000006e000-0x0000000000070000) (0MB)
[ 0.000000] efi: mem08: type=3, attr=0xf, range=[0x0000000000070000-0x0000000000088000) (0MB)
[ 0.000000] efi: mem09: type=6, attr=0x800000000000000f, range=[0x0000000000088000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem10: type=7, attr=0xf, range=[0x0000000000100000-0x0000000000c00000) (11MB)
[ 0.000000] efi: mem11: type=3, attr=0xf, range=[0x0000000000c00000-0x0000000001000000) (4MB)
[ 0.000000] efi: mem12: type=2, attr=0xf, range=[0x0000000001000000-0x0000000002404000) (20MB)
[ 0.000000] efi: mem13: type=7, attr=0xf, range=[0x0000000002404000-0x0000000035b48000) (823MB)
[ 0.000000] efi: mem14: type=2, attr=0xf, range=[0x0000000035b48000-0x0000000036d9c000) (18MB)
[ 0.000000] efi: mem15: type=7, attr=0xf, range=[0x0000000036d9c000-0x0000000045f84000) (241MB)
[ 0.000000] efi: mem16: type=2, attr=0xf, range=[0x0000000045f84000-0x0000000060380000) (419MB)
[ 0.000000] efi: mem17: type=4, attr=0xf, range=[0x0000000060380000-0x00000000603a0000) (0MB)
[ 0.000000] efi: mem18: type=7, attr=0xf, range=[0x00000000603a0000-0x0000000062718000) (35MB)
[ 0.000000] efi: mem19: type=2, attr=0xf, range=[0x0000000062718000-0x00000000628ec000) (1MB)
[ 0.000000] efi: mem20: type=4, attr=0xf, range=[0x00000000628ec000-0x000000006337c000) (10MB)
[ 0.000000] efi: mem21: type=7, attr=0xf, range=[0x000000006337c000-0x000000006337d000) (0MB)
[ 0.000000] efi: mem22: type=2, attr=0xf, range=[0x000000006337d000-0x000000006337f000) (0MB)
[ 0.000000] efi: mem23: type=7, attr=0xf, range=[0x000000006337f000-0x0000000063459000) (0MB)
[ 0.000000] efi: mem24: type=1, attr=0xf, range=[0x0000000063459000-0x000000006357f000) (1MB)
[ 0.000000] efi: mem25: type=7, attr=0xf, range=[0x000000006357f000-0x0000000068763000) (81MB)
[ 0.000000] efi: mem26: type=4, attr=0xf, range=[0x0000000068763000-0x0000000069420000) (12MB)
[ 0.000000] efi: mem27: type=7, attr=0xf, range=[0x0000000069420000-0x000000006971a000) (2MB)
[ 0.000000] efi: mem28: type=4, attr=0xf, range=[0x000000006971a000-0x000000006975d000) (0MB)
[ 0.000000] efi: mem29: type=7, attr=0xf, range=[0x000000006975d000-0x0000000069760000) (0MB)
[ 0.000000] efi: mem30: type=4, attr=0xf, range=[0x0000000069760000-0x0000000069766000) (0MB)
[ 0.000000] efi: mem31: type=7, attr=0xf, range=[0x0000000069766000-0x0000000069768000) (0MB)
[ 0.000000] efi: mem32: type=4, attr=0xf, range=[0x0000000069768000-0x0000000069862000) (0MB)
[ 0.000000] efi: mem33: type=7, attr=0xf, range=[0x0000000069862000-0x0000000069868000) (0MB)
[ 0.000000] efi: mem34: type=4, attr=0xf, range=[0x0000000069868000-0x0000000069873000) (0MB)
[ 0.000000] efi: mem35: type=7, attr=0xf, range=[0x0000000069873000-0x0000000069876000) (0MB)
[ 0.000000] efi: mem36: type=4, attr=0xf, range=[0x0000000069876000-0x00000000698a1000) (0MB)
[ 0.000000] efi: mem37: type=7, attr=0xf, range=[0x00000000698a1000-0x00000000698a2000) (0MB)
[ 0.000000] efi: mem38: type=4, attr=0xf, range=[0x00000000698a2000-0x0000000069a38000) (1MB)
[ 0.000000] efi: mem39: type=7, attr=0xf, range=[0x0000000069a38000-0x0000000069a5c000) (0MB)
[ 0.000000] efi: mem40: type=4, attr=0xf, range=[0x0000000069a5c000-0x0000000069aba000) (0MB)
[ 0.000000] efi: mem41: type=7, attr=0xf, range=[0x0000000069aba000-0x0000000069abb000) (0MB)
[ 0.000000] efi: mem42: type=4, attr=0xf, range=[0x0000000069abb000-0x0000000069ada000) (0MB)
[ 0.000000] efi: mem43: type=7, attr=0xf, range=[0x0000000069ada000-0x0000000069adc000) (0MB)
[ 0.000000] efi: mem44: type=4, attr=0xf, range=[0x0000000069adc000-0x000000006b57f000) (26MB)
[ 0.000000] efi: mem45: type=7, attr=0xf, range=[0x000000006b57f000-0x000000006cd87000) (24MB)
[ 0.000000] efi: mem46: type=2, attr=0xf, range=[0x000000006cd87000-0x000000006cd91000) (0MB)
[ 0.000000] efi: mem47: type=3, attr=0xf, range=[0x000000006cd91000-0x000000006d17f000) (3MB)
[ 0.000000] efi: mem48: type=5, attr=0x800000000000000f, range=[0x000000006d17f000-0x000000006d97f000) (8MB)
[ 0.000000] efi: mem49: type=6, attr=0x800000000000000f, range=[0x000000006d97f000-0x000000006e17f000) (8MB)
[ 0.000000] efi: mem50: type=0, attr=0xf, range=[0x000000006e17f000-0x000000006e97f000) (8MB)
[ 0.000000] efi: mem51: type=10, attr=0xf, range=[0x000000006e97f000-0x000000006eb7f000) (2MB)
[ 0.000000] efi: mem52: type=9, attr=0xf, range=[0x000000006eb7f000-0x000000006ebff000) (0MB)
[ 0.000000] efi: mem53: type=4, attr=0xf, range=[0x000000006ebff000-0x000000006ec00000) (0MB)
[ 0.000000] efi: mem54: type=0, attr=0x0, range=[0x00000000000a0000-0x00000000000c0000) (0MB)
[ 0.000000] efi: mem55: type=0, attr=0x0, range=[0x000000006ec00000-0x000000007f000000) (260MB)
[ 0.000000] efi: mem56: type=11, attr=0x8000000000000001, range=[0x00000000f8000000-0x00000000fc000000) (64MB)
[ 0.000000] efi: mem57: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[ 0.000000] efi: mem58: type=11, attr=0x8000000000000001, range=[0x00000000fec10000-0x00000000fec11000) (0MB)
[ 0.000000] efi: mem59: type=11, attr=0x8000000000000001, range=[0x00000000fed80000-0x00000000fed81000) (0MB)
[ 0.000000] efi: mem60: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
[ 0.000000] efi: mem61: type=11, attr=0x8000000000000000, range=[0x00000000ffc00000-0x0000000100000000) (4MB)
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Hewlett-Packard Compaq 15 Notebook PC/21F7, BIOS F.03 12/06/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x6ec00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FFC0000000 write-back
[ 0.000000] 1 base 0040000000 mask FFE0000000 write-back
[ 0.000000] 2 base 0060000000 mask FFF0000000 write-back
[ 0.000000] 3 base 006EB68000 mask FFFFFFF000 uncachable
[ 0.000000] 4 base 006F000000 mask FFFF000000 uncachable
[ 0.000000] 5 base 00FFC00000 mask FFFFC00000 write-protect
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000024000] 24000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01fe2000, 0x01fe2fff] PGTABLE
[ 0.000000] BRK [0x01fe3000, 0x01fe3fff] PGTABLE
[ 0.000000] BRK [0x01fe4000, 0x01fe4fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x6ca00000-0x6cbfffff]
[ 0.000000] [mem 0x6ca00000-0x6cbfffff] page 2M
[ 0.000000] BRK [0x01fe5000, 0x01fe5fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x6c000000-0x6c9fffff]
[ 0.000000] [mem 0x6c000000-0x6c9fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x6bffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x6bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x6cc00000-0x6d17efff]
[ 0.000000] [mem 0x6cc00000-0x6cffffff] page 2M
[ 0.000000] [mem 0x6d000000-0x6d17efff] page 4k
[ 0.000000] BRK [0x01fe6000, 0x01fe6fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x6ebff000-0x6ebfffff]
[ 0.000000] [mem 0x6ebff000-0x6ebfffff] page 4k
[ 0.000000] BRK [0x01fe7000, 0x01fe7fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35b48000-0x36d9bfff]
[ 0.000000] ACPI: RSDP 000000006ebfe014 000024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 000000006ebfe120 0000C4 (v01 HPQOEM SLIC-MPC 00000001 01000013)
[ 0.000000] ACPI: FACP 000000006ebfc000 00010C (v05 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.000000] ACPI: DSDT 000000006ebe9000 00E135 (v01 HPQOEM SLIC-MPC F0000000 ACPI 00040000)
[ 0.000000] ACPI: FACS 000000006eb36000 000040
[ 0.000000] ACPI: UEFI 000000006ebfd000 0001B6 (v01 HPQOEM 21F7 00000001 HP 00040000)
[ 0.000000] ACPI: HPET 000000006ebfb000 000038 (v01 HPQOEM 21F7 00000001 HP 00040000)
[ 0.000000] ACPI: APIC 000000006ebfa000 000090 (v03 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.000000] ACPI: MCFG 000000006ebf9000 00003C (v01 HPQOEM 21F7 00000001 HP 00040000)
[ 0.000000] ACPI: ASF! 000000006ebf8000 0000A5 (v32 HPQOEM 21F7 00000001 HP 00040000)
[ 0.000000] ACPI: BOOT 000000006ebe8000 000028 (v01 HPQOEM 21F7 00000001 HP 00040000)
[ 0.000000] ACPI: WDRT 000000006ebe7000 000047 (v01 HPQOEM 21F7 00000000 HP 00040000)
[ 0.000000] ACPI: WDAT 000000006ebe6000 0001AC (v01 HPQOEM 21F7 00000001 HP 00040000)
[ 0.000000] ACPI: FPDT 000000006ebe4000 000044 (v01 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.000000] ACPI: MSDM 000000006ebe3000 000055 (v03 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.000000] ACPI: SSDT 000000006ebe2000 00043C (v01 HPQOEM 21F7 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 000000006ebdd000 0046B7 (v02 HPQOEM 21F7 00000002 ACPI 00040000)
[ 0.000000] ACPI: SSDT 000000006ebdc000 000170 (v01 HPQOEM 21F7 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 000000006ebda000 0015E7 (v01 HPQOEM 21F7 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 000000006ebd9000 00008C (v01 HPQOEM 21F7 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 000000006ebd8000 000662 (v01 HPQOEM 21F7 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 000000006ebd7000 000D36 (v01 HPQOEM 21F7 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 000000006ebd5000 0010C2 (v01 HPQOEM 21F7 00000001 ACPI 00040000)
[ 0.000000] ACPI: BGRT 000000006ebd4000 000038 (v01 HPQOEM 21F7 00000001 ACPI 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000006ebfffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x6ebfffff]
[ 0.000000] NODE_DATA [mem 0x6cd8c000-0x6cd90fff]
[ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880066a00000-ffff8800685fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0006dfff]
[ 0.000000] node 0: [mem 0x00070000-0x00087fff]
[ 0.000000] node 0: [mem 0x00100000-0x6d17efff]
[ 0.000000] node 0: [mem 0x6ebff000-0x6ebfffff]
[ 0.000000] On node 0 totalpages: 446725
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 1134 pages reserved
[ 0.000000] DMA zone: 3973 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7024 pages used for memmap
[ 0.000000] DMA32 zone: 442752 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec01000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 5, version 33, address 0xfec01000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 72
[ 0.000000] PM: Registered nosave memory: [mem 0x0006e000-0x0006ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x6d17f000-0x6d97efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x6d97f000-0x6e97efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x6e97f000-0x6eb7efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x6eb7f000-0x6ebfefff]
[ 0.000000] e820: [mem 0x7f000000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88006ca00000 s81536 r8192 d20864 u524288
[ 0.000000] pcpu-alloc: s81536 r8192 d20864 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 438503
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-77-generic.efi.signed root=UUID=d3e525e6-5935-4106-ab47-22af96bf2052 ro ipv6.disable=1 quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 0 size 32 MB
[ 0.000000] Memory: 1659004K/1786900K available (7400K kernel code, 1146K rwdata, 3416K rodata, 1336K init, 1448K bss, 127896K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-3.
[ 0.000000] NR_IRQS:16640 nr_irqs:1024 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 7340032 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 998.168 MHz processor
[ 0.000007] Calibrating delay loop (skipped), value calculated using timer frequency.. 1996.33 BogoMIPS (lpj=3992672)
[ 0.000016] pid_max: default: 32768 minimum: 301
[ 0.007368] Security Framework initialized
[ 0.007422] AppArmor: AppArmor initialized
[ 0.007427] Yama: becoming mindful.
[ 0.007966] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.009594] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.010392] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.010412] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.010963] Initializing cgroup subsys memory
[ 0.010981] Initializing cgroup subsys devices
[ 0.010986] Initializing cgroup subsys freezer
[ 0.010992] Initializing cgroup subsys blkio
[ 0.010996] Initializing cgroup subsys perf_event
[ 0.011005] Initializing cgroup subsys hugetlb
[ 0.011072] tseg: 006ec00000
[ 0.011079] CPU: Physical Processor ID: 0
[ 0.011082] CPU: Processor Core ID: 0
[ 0.011088] mce: CPU supports 6 MCE banks
[ 0.011111] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.011111] Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128
[ 0.011111] tlb_flushall_shift: 5
[ 0.011418] Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
[ 0.014528] ACPI: Core revision 20131115
[ 0.049597] ACPI: All ACPI Tables successfully acquired
[ 0.063417] ftrace: allocating 28601 entries in 112 pages
[ 0.095302] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.135011] smpboot: CPU0: AMD E1-2100 APU with Radeon(TM) HD Graphics (fam: 16, model: 00, stepping: 01)
[ 0.241747] Performance Events: AMD PMU driver.
[ 0.241759] ... version: 0
[ 0.241763] ... bit width: 48
[ 0.241767] ... generic registers: 4
[ 0.241771] ... value mask: 0000ffffffffffff
[ 0.241775] ... max period: 00007fffffffffff
[ 0.241778] ... fixed-purpose events: 0
[ 0.241782] ... event mask: 000000000000000f
[ 0.247307] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.247585] x86: Booting SMP configuration:
[ 0.247592] .... node #0, CPUs: #1
[ 0.260741] x86: Booted up 1 node, 2 CPUs
[ 0.260753] smpboot: Total of 2 processors activated (3992.67 BogoMIPS)
[ 0.261895] devtmpfs: initialized
[ 0.273847] EVM: security.selinux
[ 0.273853] EVM: security.SMACK64
[ 0.273857] EVM: security.ima
[ 0.273861] EVM: security.capability
[ 0.274038] PM: Registering ACPI NVS region [mem 0x0006e000-0x0006ffff] (8192 bytes)
[ 0.274045] PM: Registering ACPI NVS region [mem 0x6e97f000-0x6eb7efff] (2097152 bytes)
[ 0.277235] pinctrl core: initialized pinctrl subsystem
[ 0.277451] regulator-dummy: no parameters
[ 0.277502] RTC time: 8:46:18, date: 02/08/16
[ 0.277630] NET: Registered protocol family 16
[ 0.278007] cpuidle: using governor ladder
[ 0.278013] cpuidle: using governor menu
[ 0.278166] ACPI: bus type PCI registered
[ 0.278173] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.278353] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.278362] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.286442] PCI: Using configuration type 1 for base access
[ 0.289524] bio: create slab <bio-0> at 0
[ 0.290069] ACPI: Added _OSI(Module Device)
[ 0.290076] ACPI: Added _OSI(Processor Device)
[ 0.290080] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.290084] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.302528] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.318285] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.713971] ACPI: Interpreter enabled
[ 0.713996] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[ 0.714012] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.714058] ACPI: (supports S0 S3 S4 S5)
[ 0.714064] ACPI: Using IOAPIC for interrupt routing
[ 0.714611] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.715130] ACPI: No dock devices found.
[ 0.716237] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.716300] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.717886] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.717924] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.989018] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.989040] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.989057] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.989633] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cebff])
[ 0.989648] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.990099] PCI host bridge to bus 0000:00
[ 0.990109] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.990116] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.990123] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.990130] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.990136] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[ 0.990142] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[ 0.990148] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[ 0.990154] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.990160] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.990166] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.990172] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.990178] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.990184] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.990190] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[ 0.990195] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[ 0.990202] pci_bus 0000:00: root bus resource [mem 0x7f000000-0xf7ffffff]
[ 0.990208] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed3ffff]
[ 0.990214] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff]
[ 0.990234] pci 0000:00:00.0: [1022:1536] type 00 class 0x060000
[ 0.990453] pci 0000:00:01.0: [1002:9834] type 00 class 0x030000
[ 0.990480] pci 0000:00:01.0: reg 0x10: [mem 0x80000000-0x8fffffff 64bit pref]
[ 0.990499] pci 0000:00:01.0: reg 0x18: [mem 0x90000000-0x907fffff 64bit pref]
[ 0.990513] pci 0000:00:01.0: reg 0x20: [io 0x3000-0x30ff]
[ 0.990527] pci 0000:00:01.0: reg 0x24: [mem 0x90c00000-0x90c3ffff]
[ 0.990541] pci 0000:00:01.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[ 0.990600] pci 0000:00:01.0: supports D1 D2
[ 0.990607] pci 0000:00:01.0: PME# supported from D1 D2 D3hot
[ 0.990804] pci 0000:00:01.1: [1002:9840] type 00 class 0x040300
[ 0.990829] pci 0000:00:01.1: reg 0x10: [mem 0x90c40000-0x90c43fff 64bit]
[ 0.990924] pci 0000:00:01.1: supports D1 D2
[ 0.991094] pci 0000:00:02.0: [1022:1538] type 00 class 0x060000
[ 0.991292] pci 0000:00:02.1: [1022:1439] type 01 class 0x060400
[ 0.991399] pci 0000:00:02.1: PME# supported from D0 D3hot D3cold
[ 0.991602] pci 0000:00:02.3: [1022:1439] type 01 class 0x060400
[ 0.991708] pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
[ 0.991899] pci 0000:00:02.4: [1022:1439] type 01 class 0x060400
[ 0.992004] pci 0000:00:02.4: PME# supported from D0 D3hot D3cold
[ 0.992195] pci 0000:00:02.5: [1022:1439] type 01 class 0x060400
[ 0.992300] pci 0000:00:02.5: PME# supported from D0 D3hot D3cold
[ 0.992520] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
[ 0.992550] pci 0000:00:10.0: reg 0x10: [mem 0x90c48000-0x90c49fff 64bit]
[ 0.992674] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[ 0.992848] pci 0000:00:10.0: System wakeup disabled by ACPI
[ 0.992960] pci 0000:00:11.0: [1022:7804] type 00 class 0x010601
[ 0.992992] pci 0000:00:11.0: reg 0x10: [io 0x3118-0x311f]
[ 0.993007] pci 0000:00:11.0: reg 0x14: [io 0x3124-0x3127]
[ 0.993022] pci 0000:00:11.0: reg 0x18: [io 0x3110-0x3117]
[ 0.993037] pci 0000:00:11.0: reg 0x1c: [io 0x3120-0x3123]
[ 0.993051] pci 0000:00:11.0: reg 0x20: [io 0x3100-0x310f]
[ 0.993066] pci 0000:00:11.0: reg 0x24: [mem 0x90c4f000-0x90c4f3ff]
[ 0.993141] pci 0000:00:11.0: PME# supported from D3hot
[ 0.993327] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[ 0.993348] pci 0000:00:12.0: reg 0x10: [mem 0x90c4e000-0x90c4efff]
[ 0.993555] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.993652] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[ 0.993680] pci 0000:00:12.2: reg 0x10: [mem 0x90c4d000-0x90c4d0ff]
[ 0.993779] pci 0000:00:12.2: supports D1 D2
[ 0.993785] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.993941] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.994038] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[ 0.994060] pci 0000:00:13.0: reg 0x10: [mem 0x90c4c000-0x90c4cfff]
[ 0.994258] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.994360] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[ 0.994388] pci 0000:00:13.2: reg 0x10: [mem 0x90c4b000-0x90c4b0ff]
[ 0.994486] pci 0000:00:13.2: supports D1 D2
[ 0.994493] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.994637] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.994735] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[ 0.994978] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[ 0.995011] pci 0000:00:14.2: reg 0x10: [mem 0x90c44000-0x90c47fff 64bit]
[ 0.995103] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.995280] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[ 0.995523] pci 0000:00:14.7: [1022:7813] type 00 class 0x080501
[ 0.995550] pci 0000:00:14.7: reg 0x10: [mem 0x90c4a000-0x90c4a0ff 64bit]
[ 0.995765] pci 0000:00:18.0: [1022:1530] type 00 class 0x060000
[ 0.995951] pci 0000:00:18.1: [1022:1531] type 00 class 0x060000
[ 0.996131] pci 0000:00:18.2: [1022:1532] type 00 class 0x060000
[ 0.996316] pci 0000:00:18.3: [1022:1533] type 00 class 0x060000
[ 0.996506] pci 0000:00:18.4: [1022:1534] type 00 class 0x060000
[ 0.996688] pci 0000:00:18.5: [1022:1535] type 00 class 0x060000
[ 0.997046] pci 0000:00:02.1: PCI bridge to [bus 01]
[ 0.997278] pci 0000:02:00.0: [10ec:5229] type 00 class 0xff0000
[ 0.997322] pci 0000:02:00.0: reg 0x10: [mem 0x90b00000-0x90b00fff]
[ 0.997535] pci 0000:02:00.0: supports D1 D2
[ 0.997541] pci 0000:02:00.0: PME# supported from D1 D2 D3hot
[ 1.002084] pci 0000:00:02.3: PCI bridge to [bus 02]
[ 1.002109] pci 0000:00:02.3: bridge window [mem 0x90b00000-0x90bfffff]
[ 1.002514] pci 0000:03:00.0: [168c:0032] type 00 class 0x028000
[ 1.002618] pci 0000:03:00.0: reg 0x10: [mem 0x90a00000-0x90a7ffff 64bit]
[ 1.002747] pci 0000:03:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[ 1.003001] pci 0000:03:00.0: supports D1 D2
[ 1.003008] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.010084] pci 0000:00:02.4: PCI bridge to [bus 03]
[ 1.010109] pci 0000:00:02.4: bridge window [mem 0x90a00000-0x90afffff]
[ 1.010380] pci 0000:04:00.0: [10ec:8136] type 00 class 0x020000
[ 1.010443] pci 0000:04:00.0: reg 0x10: [io 0x2000-0x20ff]
[ 1.010515] pci 0000:04:00.0: reg 0x18: [mem 0x90900000-0x90900fff 64bit]
[ 1.010554] pci 0000:04:00.0: reg 0x20: [mem 0x90800000-0x90803fff 64bit pref]
[ 1.010725] pci 0000:04:00.0: supports D1 D2
[ 1.010731] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.010886] pci 0000:04:00.0: System wakeup disabled by ACPI
[ 1.018047] pci 0000:00:02.5: PCI bridge to [bus 04]
[ 1.018068] pci 0000:00:02.5: bridge window [io 0x2000-0x2fff]
[ 1.018078] pci 0000:00:02.5: bridge window [mem 0x90900000-0x909fffff]
[ 1.018091] pci 0000:00:02.5: bridge window [mem 0x90800000-0x908fffff 64bit pref]
[ 1.098731] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 1.098960] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 1.099184] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 1.099405] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 1.099594] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 1.099738] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 1.099880] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 1.100023] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 1.101073] ACPI: Enabled 2 GPEs in block 00 to 1F
[ 1.101094] ACPI: \_SB_.PCI0: notify handler is installed
[ 1.101296] Found 1 acpi root devices
[ 1.101412] ACPI : EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[ 1.101782] vgaarb: setting as boot device: PCI:0000:00:01.0
[ 1.101790] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.101810] vgaarb: loaded
[ 1.101815] vgaarb: bridge control possible 0000:00:01.0
[ 1.102386] SCSI subsystem initialized
[ 1.102585] libata version 3.00 loaded.
[ 1.102656] ACPI: bus type USB registered
[ 1.102705] usbcore: registered new interface driver usbfs
[ 1.102729] usbcore: registered new interface driver hub
[ 1.102824] usbcore: registered new device driver usb
[ 1.103188] PCI: Using ACPI for IRQ routing
[ 1.105259] PCI: pci_cache_line_size set to 64 bytes
[ 1.105601] e820: reserve RAM buffer [mem 0x0006e000-0x0006ffff]
[ 1.105608] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
[ 1.105613] e820: reserve RAM buffer [mem 0x6d17f000-0x6fffffff]
[ 1.105618] e820: reserve RAM buffer [mem 0x6ec00000-0x6fffffff]
[ 1.105856] NetLabel: Initializing
[ 1.105861] NetLabel: domain hash size = 128
[ 1.105864] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.105901] NetLabel: unlabeled traffic allowed by default
[ 1.106128] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 1.106141] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 1.108275] Switched to clocksource hpet
[ 1.122161] AppArmor: AppArmor Filesystem Enabled
[ 1.122238] pnp: PnP ACPI init
[ 1.122282] ACPI: bus type PNP registered
[ 1.122674] system 00:00: [mem 0xfec00000-0xfec01fff] could not be reserved
[ 1.122684] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[ 1.122692] system 00:00: [mem 0xff000000-0xff000fff] has been reserved
[ 1.122702] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.123061] pnp 00:01: Plug and Play ACPI device, IDs PNP0103 (active)
[ 1.123289] pnp 00:02: [dma 4]
[ 1.123351] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 1.123445] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 1.123590] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.123672] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 1.123847] pnp 00:06: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
[ 1.124005] pnp 00:07: Plug and Play ACPI device, IDs SYN1ead PNP0f13 (active)
[ 1.124144] system 00:08: [io 0x0400-0x04cf] could not be reserved
[ 1.124153] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 1.124160] system 00:08: [io 0x04d6] has been reserved
[ 1.124167] system 00:08: [io 0x0680-0x06ff] has been reserved
[ 1.124174] system 00:08: [io 0x077a] has been reserved
[ 1.124181] system 00:08: [io 0x0c00-0x0c01] has been reserved
[ 1.124187] system 00:08: [io 0x0c14] has been reserved
[ 1.124194] system 00:08: [io 0x0c50-0x0c52] has been reserved
[ 1.124201] system 00:08: [io 0x0c6c] has been reserved
[ 1.124207] system 00:08: [io 0x0c6f] has been reserved
[ 1.124218] system 00:08: [io 0x0cd0-0x0cdb] has been reserved
[ 1.124225] system 00:08: [io 0x0840-0x0847] has been reserved
[ 1.124234] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.124487] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
[ 1.124496] system 00:09: [mem 0xffc00000-0xffffffff] has been reserved
[ 1.124505] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.205470] pnp: PnP ACPI: found 10 devices
[ 1.205481] ACPI: bus type PNP unregistered
[ 1.215989] pci 0000:00:01.0: address space collision: [mem 0xfffe0000-0xffffffff pref] conflicts with reserved [mem 0xffc00000-0xffffffff]
[ 1.216002] pci 0000:03:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
[ 1.216041] pci 0000:00:02.1: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 1.216052] pci 0000:00:02.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
[ 1.216061] pci 0000:00:02.1: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
[ 1.216108] pci 0000:00:02.1: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 1.216115] pci 0000:00:02.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 1.216122] pci 0000:00:02.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 1.216138] pci 0000:00:02.1: BAR 14: assigned [mem 0x7f000000-0x7f1fffff]
[ 1.216152] pci 0000:00:02.1: BAR 15: assigned [mem 0x7f200000-0x7f3fffff 64bit pref]
[ 1.216165] pci 0000:00:02.4: BAR 15: assigned [mem 0x7f400000-0x7f4fffff pref]
[ 1.216178] pci 0000:00:01.0: BAR 6: assigned [mem 0x7f500000-0x7f51ffff pref]
[ 1.216189] pci 0000:00:02.1: BAR 13: assigned [io 0x1000-0x1fff]
[ 1.216197] pci 0000:00:02.1: PCI bridge to [bus 01]
[ 1.216204] pci 0000:00:02.1: bridge window [io 0x1000-0x1fff]
[ 1.216214] pci 0000:00:02.1: bridge window [mem 0x7f000000-0x7f1fffff]
[ 1.216222] pci 0000:00:02.1: bridge window [mem 0x7f200000-0x7f3fffff 64bit pref]
[ 1.216233] pci 0000:00:02.3: PCI bridge to [bus 02]
[ 1.216243] pci 0000:00:02.3: bridge window [mem 0x90b00000-0x90bfffff]
[ 1.216258] pci 0000:03:00.0: BAR 6: assigned [mem 0x7f400000-0x7f40ffff pref]
[ 1.216264] pci 0000:00:02.4: PCI bridge to [bus 03]
[ 1.216274] pci 0000:00:02.4: bridge window [mem 0x90a00000-0x90afffff]
[ 1.216296] pci 0000:00:02.4: bridge window [mem 0x7f400000-0x7f4fffff pref]
[ 1.216307] pci 0000:00:02.5: PCI bridge to [bus 04]
[ 1.216314] pci 0000:00:02.5: bridge window [io 0x2000-0x2fff]
[ 1.216323] pci 0000:00:02.5: bridge window [mem 0x90900000-0x909fffff]
[ 1.216332] pci 0000:00:02.5: bridge window [mem 0x90800000-0x908fffff 64bit pref]
[ 1.216345] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.216351] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.216358] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.216364] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 1.216371] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 1.216377] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 1.216383] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
[ 1.216389] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
[ 1.216395] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
[ 1.216401] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
[ 1.216407] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
[ 1.216413] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
[ 1.216419] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
[ 1.216425] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
[ 1.216431] pci_bus 0000:00: resource 18 [mem 0x7f000000-0xf7ffffff]
[ 1.216437] pci_bus 0000:00: resource 19 [mem 0xfc000000-0xfed3ffff]
[ 1.216444] pci_bus 0000:00: resource 20 [mem 0xfed45000-0xffffffff]
[ 1.216450] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 1.216456] pci_bus 0000:01: resource 1 [mem 0x7f000000-0x7f1fffff]
[ 1.216463] pci_bus 0000:01: resource 2 [mem 0x7f200000-0x7f3fffff 64bit pref]
[ 1.216469] pci_bus 0000:02: resource 1 [mem 0x90b00000-0x90bfffff]
[ 1.216476] pci_bus 0000:03: resource 1 [mem 0x90a00000-0x90afffff]
[ 1.216482] pci_bus 0000:03: resource 2 [mem 0x7f400000-0x7f4fffff pref]
[ 1.216489] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
[ 1.216495] pci_bus 0000:04: resource 1 [mem 0x90900000-0x909fffff]
[ 1.216501] pci_bus 0000:04: resource 2 [mem 0x90800000-0x908fffff 64bit pref]
[ 1.216590] NET: Registered protocol family 2
[ 1.217210] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 1.217353] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 1.217463] TCP: Hash tables configured (established 16384 bind 16384)
[ 1.217537] TCP: reno registered
[ 1.217556] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 1.217588] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 1.217763] NET: Registered protocol family 1
[ 1.217803] pci 0000:00:01.0: Video device with shadowed ROM
[ 1.365166] PCI: CLS 64 bytes, default 64
[ 1.365363] Trying to unpack rootfs image as initramfs...
[ 2.298875] Freeing initrd memory: 18768K (ffff880035b48000 - ffff880036d9c000)
[ 2.299089] Simple Boot Flag at 0x44 set to 0x1
[ 2.299310] perf: AMD NB counters detected
[ 2.299327] perf: AMD L2I counters detected
[ 2.299350] LVT offset 0 assigned for vector 0x400
[ 2.299404] perf: AMD IBS detected (0x000000ff)
[ 2.299533] microcode: CPU0: patch_level=0x0700010b
[ 2.299551] microcode: CPU1: patch_level=0x0700010b
[ 2.299706] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 2.299713] Scanning for low memory corruption every 60 seconds
[ 2.300480] Initialise system trusted keyring
[ 2.300622] audit: initializing netlink socket (disabled)
[ 2.300648] type=2000 audit(1454921179.832:1): initialized
[ 2.389759] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.393546] zbud: loaded
[ 2.393949] VFS: Disk quotas dquot_6.5.2
[ 2.394081] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.395555] fuse init (API version 7.22)
[ 2.395794] msgmni has been set to 3400
[ 2.395960] Key type big_key registered
[ 2.396926] Key type asymmetric registered
[ 2.396932] Asymmetric key parser 'x509' registered
[ 2.397031] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 2.397129] io scheduler noop registered
[ 2.397136] io scheduler deadline registered (default)
[ 2.397222] io scheduler cfq registered
[ 2.398422] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.398467] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.398594] efifb: probing for efifb
[ 2.399210] efifb: framebuffer at 0x80000000, mapped to 0xffffc90004480000, using 4224k, total 4224k
[ 2.399216] efifb: mode is 1366x768x32, linelength=5632, pages=1
[ 2.399219] efifb: scrolling: redraw
[ 2.399226] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 2.409686] Console: switching to colour frame buffer device 170x48
[ 2.419804] fb0: EFI VGA frame buffer device
[ 2.419912] ipmi message handler version 39.2
[ 2.432802] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 2.440847] ACPI: AC Adapter [ACAD] (on-line)
[ 2.441501] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 2.441513] ACPI: Power Button [PWRB]
[ 2.441657] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 2.441727] ACPI: Lid Switch [LID]
[ 2.441832] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 2.441841] ACPI: Power Button [PWRF]
[ 2.441985] ACPI: acpi_idle registered with cpuidle
[ 2.442820] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.442826] ACPI: Thermal Zone [TSZ0] (32 C)
[ 2.443140] thermal LNXTHERM:01: registered as thermal_zone1
[ 2.443146] ACPI: Thermal Zone [TSZ2] (20 C)
[ 2.443224] GHES: HEST is not enabled!
[ 2.443484] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 2.447921] Linux agpgart interface v0.103
[ 2.452015] brd: module loaded
[ 2.454270] loop: module loaded
[ 2.455462] libphy: Fixed MDIO Bus: probed
[ 2.455746] tun: Universal TUN/TAP device driver, 1.6
[ 2.455751] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 2.455906] PPP generic driver version 2.4.2
[ 2.456036] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.456048] ehci-pci: EHCI PCI platform driver
[ 2.456354] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 2.456697] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 2.456712] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.456729] ehci-pci 0000:00:12.2: debug port 1
[ 2.456813] ehci-pci 0000:00:12.2: irq 17, io mem 0x90c4d000
[ 2.468545] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 2.468727] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.468735] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.468742] usb usb1: Product: EHCI Host Controller
[ 2.468748] usb usb1: Manufacturer: Linux 3.13.0-77-generic ehci_hcd
[ 2.468754] usb usb1: SerialNumber: 0000:00:12.2
[ 2.469168] hub 1-0:1.0: USB hub found
[ 2.469193] hub 1-0:1.0: 4 ports detected
[ 2.469828] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 2.469845] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 2.469856] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.469872] ehci-pci 0000:00:13.2: debug port 1
[ 2.469932] ehci-pci 0000:00:13.2: irq 17, io mem 0x90c4b000
[ 2.480554] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 2.480766] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.480774] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.480781] usb usb2: Product: EHCI Host Controller
[ 2.480787] usb usb2: Manufacturer: Linux 3.13.0-77-generic ehci_hcd
[ 2.480793] usb usb2: SerialNumber: 0000:00:13.2
[ 2.481198] hub 2-0:1.0: USB hub found
[ 2.481223] hub 2-0:1.0: 4 ports detected
[ 2.481747] ehci-platform: EHCI generic platform driver
[ 2.481780] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.481784] ohci-pci: OHCI PCI platform driver
[ 2.482019] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 2.482036] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 2.482098] ohci-pci 0000:00:12.0: irq 18, io mem 0x90c4e000
[ 2.540660] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.540673] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.540680] usb usb3: Product: OHCI PCI host controller
[ 2.540686] usb usb3: Manufacturer: Linux 3.13.0-77-generic ohci_hcd
[ 2.540692] usb usb3: SerialNumber: 0000:00:12.0
[ 2.541867] hub 3-0:1.0: USB hub found
[ 2.541896] hub 3-0:1.0: 4 ports detected
[ 2.542557] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 2.542579] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
[ 2.542615] ohci-pci 0000:00:13.0: irq 18, io mem 0x90c4c000
[ 2.600663] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.600675] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.600682] usb usb4: Product: OHCI PCI host controller
[ 2.600689] usb usb4: Manufacturer: Linux 3.13.0-77-generic ohci_hcd
[ 2.600694] usb usb4: SerialNumber: 0000:00:13.0
[ 2.601071] hub 4-0:1.0: USB hub found
[ 2.601099] hub 4-0:1.0: 4 ports detected
[ 2.601558] ohci-platform: OHCI generic platform driver
[ 2.601590] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.601891] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 2.601908] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 5
[ 2.602192] xhci_hcd 0000:00:10.0: irq 72 for MSI/MSI-X
[ 2.602217] xhci_hcd 0000:00:10.0: irq 73 for MSI/MSI-X
[ 2.602237] xhci_hcd 0000:00:10.0: irq 74 for MSI/MSI-X
[ 2.602446] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.602453] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.602459] usb usb5: Product: xHCI Host Controller
[ 2.602464] usb usb5: Manufacturer: Linux 3.13.0-77-generic xhci_hcd
[ 2.602469] usb usb5: SerialNumber: 0000:00:10.0
[ 2.602781] hub 5-0:1.0: USB hub found
[ 2.602807] hub 5-0:1.0: 2 ports detected
[ 2.603033] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 2.603044] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6
[ 2.605602] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[ 2.605609] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.605615] usb usb6: Product: xHCI Host Controller
[ 2.605620] usb usb6: Manufacturer: Linux 3.13.0-77-generic xhci_hcd
[ 2.605625] usb usb6: SerialNumber: 0000:00:10.0
[ 2.605892] hub 6-0:1.0: USB hub found
[ 2.605917] hub 6-0:1.0: 2 ports detected
[ 2.616868] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.634467] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.634485] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.634938] mousedev: PS/2 mouse device common for all mice
[ 2.635373] rtc_cmos 00:04: RTC can wake from S4
[ 2.635574] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 2.635611] rtc_cmos 00:04: alarms up to one month, 114 bytes nvram, hpet irqs
[ 2.635822] device-mapper: uevent: version 1.0.3
[ 2.636009] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 2.636028] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.636033] EFI Variables Facility v0.08 2004-May-17
[ 2.653969] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 2.659160] TCP: cubic registered
[ 2.659171] IPv6: Loaded, but administratively disabled, reboot required to enable
[ 2.659178] NET: Registered protocol family 17
[ 2.659218] Key type dns_resolver registered
[ 2.659956] Loading compiled-in X.509 certificates
[ 2.665696] Loaded X.509 cert 'Magrathea: Glacier signing key: d961bd20e8ac66643fc6dc2d56668f426e33e88f'
[ 2.665733] registered taskstats version 1
[ 2.672047] Key type trusted registered
[ 2.683323] Key type encrypted registered
[ 2.683340] AppArmor: AppArmor sha1 policy hashing enabled
[ 2.683346] IMA: No TPM chip found, activating TPM-bypass!
[ 2.684334] regulator-dummy: disabling
[ 2.684528] Magic number: 4:657:775
[ 2.684549] misc psaux: hash matches
[ 2.684608] misc fuse: hash matches
[ 2.684755] rtc_cmos 00:04: setting system clock to 2016-02-08 08:46:21 UTC (1454921181)
[ 2.684999] acpi-cpufreq: overriding BIOS provided _PSD data
[ 2.685192] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.685197] EDD information not available.
[ 2.685312] PM: Hibernation image not present or could not be loaded.
[ 2.828760] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 2.828781] ACPI: Battery Slot [BAT1] (battery present)
[ 2.833169] Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
[ 2.833181] Write protecting the kernel read-only data: 12288k
[ 2.834218] Freeing unused kernel memory: 780K (ffff88000173d000 - ffff880001800000)
[ 2.840725] Freeing unused kernel memory: 680K (ffff880001b56000 - ffff880001c00000)
[ 2.874521] systemd-udevd[106]: starting version 204
[ 2.949336] ACPI Error: [SSZE] Namespace lookup failure, AE_ALREADY_EXISTS (20131115/dsfield-211)
[ 2.949358] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPC0.ACAD._PSR] (Node ffff8800666bb488), AE_ALREADY_EXISTS (20131115/psparse-536)
[ 2.949380] ACPI Exception: AE_ALREADY_EXISTS, Error reading AC Adapter state (20131115/ac-130)
[ 2.949579] ACPI Error: [SSZE] Namespace lookup failure, AE_ALREADY_EXISTS (20131115/dsfield-211)
[ 2.949592] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPC0.ACAD._PSR] (Node ffff8800666bb488), AE_ALREADY_EXISTS (20131115/psparse-536)
[ 2.949609] ACPI Exception: AE_ALREADY_EXISTS, Error reading AC Adapter state (20131115/ac-130)
[ 2.949793] ACPI Error: [SSZE] Namespace lookup failure, AE_ALREADY_EXISTS (20131115/dsfield-211)
[ 2.949806] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPC0.ACAD._PSR] (Node ffff8800666bb488), AE_ALREADY_EXISTS (20131115/psparse-536)
[ 2.949822] ACPI Exception: AE_ALREADY_EXISTS, Error reading AC Adapter state (20131115/ac-130)
[ 2.952734] ACPI: Marking method _PSR as Serialized because of AE_ALREADY_EXISTS error
[ 2.966202] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 2.968299] rtsx_pci 0000:02:00.0: irq 75 for MSI/MSI-X
[ 2.968393] rtsx_pci 0000:02:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 75
[ 2.974994] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.975021] r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 2.975450] r8169 0000:04:00.0: irq 76 for MSI/MSI-X
[ 2.975806] r8169 0000:04:00.0 eth0: RTL8106e at 0xffffc90000362000, a0:48:1c:d4:73:56, XID 04900000 IRQ 76
[ 2.988001] sdhci: Secure Digital Host Controller Interface driver
[ 2.988010] sdhci: Copyright(c) Pierre Ossman
[ 2.994065] ahci 0000:00:11.0: version 3.0
[ 3.004331] ahci 0000:00:11.0: irq 77 for MSI/MSI-X
[ 3.004473] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 3.004485] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio slum part
[ 3.089501] scsi0 : ahci
[ 3.091183] scsi1 : ahci
[ 3.091327] ata1: SATA max UDMA/133 abar m1024@0x90c4f000 port 0x90c4f100 irq 77
[ 3.091336] ata2: SATA max UDMA/133 abar m1024@0x90c4f000 port 0x90c4f180 irq 77
[ 3.091530] sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7813] (rev 1)
[ 3.091837] sdhci-pci 0000:00:14.7: dummy supplies not allowed
[ 3.091867] mmc0: no vqmmc regulator found
[ 3.091875] sdhci-pci 0000:00:14.7: dummy supplies not allowed
[ 3.091879] mmc0: no vmmc regulator found
[ 3.092063] mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA
[ 3.156299] usb 2-1: New USB device found, idVendor=064e, idProduct=9302
[ 3.156311] usb 2-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 3.156318] usb 2-1: Product: HP Truevision HD
[ 3.156324] usb 2-1: Manufacturer: SuYin
[ 3.156330] usb 2-1: SerialNumber: HF1016-T821-HN04-2-REV0102
[ 3.296671] tsc: Refined TSC clocksource calibration: 998.127 MHz
[ 3.296678] usb 3-1: new low-speed USB device number 2 using ohci-pci
[ 3.467830] usb 3-1: New USB device found, idVendor=046d, idProduct=c001
[ 3.467842] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.467849] usb 3-1: Product: USB Mouse
[ 3.467855] usb 3-1: Manufacturer: Logitech
[ 3.479549] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.493340] usbcore: registered new interface driver usbhid
[ 3.493349] usbhid: USB HID core driver
[ 3.498609] input: Logitech USB Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/input/input6
[ 3.498909] hid-generic 0003:046D:C001.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:12.0-1/input0
[ 3.580648] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3.581369] ata1.00: ATA-9: WDC WD5000LPVX-60V0TT0, 01.01A01, max UDMA/133
[ 3.581378] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 3.582100] ata1.00: configured for UDMA/133
[ 3.582405] scsi 0:0:0:0: Direct-Access ATA WDC WD5000LPVX-6 01.0 PQ: 0 ANSI: 5
[ 3.582887] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.582892] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 3.582899] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 3.583127] sd 0:0:0:0: [sda] Write Protect is off
[ 3.583136] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.583239] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.584525] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.589146] ata2.00: ATAPI: hp DVDRAM GU90N, U900, max UDMA/100
[ 3.593969] ata2.00: configured for UDMA/100
[ 3.597923] scsi 1:0:0:0: CD-ROM hp DVDRAM GU90N U900 PQ: 0 ANSI: 5
[ 3.602368] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.602380] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.602736] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.602915] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 3.683510] sda: sda1 sda2 sda3 sda4
[ 3.684689] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.169695] psmouse serio1: synaptics: queried max coordinates: x [..5696], y [..4884]
[ 4.224449] psmouse serio1: synaptics: queried min coordinates: x [1276..], y [1044..]
[ 4.297159] Switched to clocksource tsc
[ 4.338758] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1c0b1, caps: 0xf00133/0x240000/0xa2400, board id: 2665, fw id: 1458825
[ 4.411368] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[ 4.600798] [Firmware Bug]: battery: (dis)charge rate invalid.
[ 5.111902] random: nonblocking pool is initialized
[ 5.266509] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 6.505348] init: plymouth-upstart-bridge main process (163) terminated with status 1
[ 6.505389] init: plymouth-upstart-bridge main process ended, respawning
[ 6.514109] init: plymouth-upstart-bridge main process (174) terminated with status 1
[ 6.514154] init: plymouth-upstart-bridge main process ended, respawning
[ 6.521351] init: plymouth-upstart-bridge main process (176) terminated with status 1
[ 6.521393] init: plymouth-upstart-bridge main process ended, respawning
[ 6.530494] init: plymouth-upstart-bridge main process (177) terminated with status 1
[ 6.530536] init: plymouth-upstart-bridge main process ended, respawning
[ 6.539814] init: plymouth-upstart-bridge main process (179) terminated with status 1
[ 6.539855] init: plymouth-upstart-bridge main process ended, respawning
[ 6.549312] init: plymouth-upstart-bridge main process (181) terminated with status 1
[ 6.549354] init: plymouth-upstart-bridge main process ended, respawning
[ 6.556213] init: plymouth-upstart-bridge main process (183) terminated with status 1
[ 6.556253] init: plymouth-upstart-bridge main process ended, respawning
[ 6.565053] init: plymouth-upstart-bridge main process (184) terminated with status 1
[ 6.565098] init: plymouth-upstart-bridge main process ended, respawning
[ 6.572887] init: plymouth-upstart-bridge main process (186) terminated with status 1
[ 6.572929] init: plymouth-upstart-bridge main process ended, respawning
[ 6.581602] init: plymouth-upstart-bridge main process (187) terminated with status 1
[ 6.581647] init: plymouth-upstart-bridge main process ended, respawning
[ 6.588258] init: plymouth-upstart-bridge main process (189) terminated with status 1
[ 6.588298] init: plymouth-upstart-bridge respawning too fast, stopped
[ 13.852414] Adding 1785852k swap on /dev/sda3. Priority:-1 extents:1 across:1785852k FS
[ 14.110259] systemd-udevd[292]: starting version 204
[ 14.349703] Initializing HPQ6001 module
[ 14.349990] input: HP Wireless hotkeys as /devices/virtual/input/input7
[ 14.364080] lp: driver loaded but no devices found
[ 14.392928] ppdev: user-space parallel port driver
[ 14.404679] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 14.404719] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 14.432358] acpi device:01: registered as cooling_device2
[ 14.432693] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8
[ 14.559981] wmi: Mapper loaded
[ 14.573480] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 14.600061] [drm] Initialized drm 1.1.0 20060810
[ 14.751162] cfg80211: Calling CRDA to update world regulatory domain
[ 14.782837] [drm] radeon kernel modesetting enabled.
[ 14.782940] checking generic (80000000 420000) vs hw (80000000 10000000)
[ 14.782947] fb: conflicting fb hw usage radeondrmfb vs EFI VGA - removing generic driver
[ 14.782993] Console: switching to colour dummy device 80x25
[ 14.784503] [drm] initializing kernel modesetting (KABINI 0x1002:0x9834 0x103C:0x21F7).
[ 14.784581] [drm] register mmio base: 0x90C00000
[ 14.784585] [drm] register mmio size: 262144
[ 14.784607] [drm] doorbell mmio base: 0x90000000
[ 14.784611] [drm] doorbell mmio size: 8388608
[ 14.786433] ATOM BIOS: AMD
[ 14.786562] radeon 0000:00:01.0: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (256M used)
[ 14.786572] radeon 0000:00:01.0: GTT: 1024M 0x0000000010000000 - 0x000000004FFFFFFF
[ 14.786577] [drm] Detected VRAM RAM=256M, BAR=256M
[ 14.786581] [drm] RAM width 128bits DDR
[ 14.789441] [TTM] Zone kernel: Available graphics memory: 871990 kiB
[ 14.789450] [TTM] Initializing pool allocator
[ 14.789462] [TTM] Initializing DMA pool allocator
[ 14.789518] [drm] radeon: 256M of VRAM memory ready
[ 14.789524] [drm] radeon: 1024M of GTT memory ready.
[ 14.789555] [drm] Loading KABINI Microcode
[ 14.826743] type=1400 audit(1454921193.637:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=342 comm="apparmor_parser"
[ 14.826766] type=1400 audit(1454921193.637:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=342 comm="apparmor_parser"
[ 14.826781] type=1400 audit(1454921193.637:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=342 comm="apparmor_parser"
[ 14.828205] type=1400 audit(1454921193.637:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=342 comm="apparmor_parser"
[ 14.828233] type=1400 audit(1454921193.637:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=342 comm="apparmor_parser"
[ 14.828942] type=1400 audit(1454921193.637:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=342 comm="apparmor_parser"
[ 14.910074] ath: phy0: Enable LNA combining
[ 14.911288] ath: phy0: ASPM enabled: 0x43
[ 14.911296] ath: EEPROM regdomain: 0x60
[ 14.911301] ath: EEPROM indicates we should expect a direct regpair map
[ 14.911308] ath: Country alpha2 being used: 00
[ 14.911312] ath: Regpair used: 0x60
[ 14.926913] MCE: In-kernel MCE decoding enabled.
[ 14.943051] EDAC MC: Ver: 3.0.0
[ 14.950805] AMD64 EDAC driver v3.4.0
[ 14.980260] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 14.981698] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90004480000, irq=36
[ 15.131898] Linux video capture interface: v2.00
[ 15.207651] uvcvideo: Found UVC 1.00 device HP Truevision HD (064e:9302)
[ 15.231468] input: HP Truevision HD as /devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1:1.0/input/input9
[ 15.231771] usbcore: registered new interface driver uvcvideo
[ 15.231777] USB Video Class driver (1.1.1)
[ 15.442393] kvm: disabled by bios
[ 15.572587] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 15.648017] [drm] PCIE GART of 1024M enabled (table at 0x0000000000277000).
[ 15.648279] radeon 0000:00:01.0: WB enabled
[ 15.648330] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000010000c00 and cpu addr 0xffff880062e0bc00
[ 15.648339] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000010000c04 and cpu addr 0xffff880062e0bc04
[ 15.648347] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000010000c08 and cpu addr 0xffff880062e0bc08
[ 15.648354] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000010000c0c and cpu addr 0xffff880062e0bc0c
[ 15.648361] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000010000c10 and cpu addr 0xffff880062e0bc10
[ 15.649312] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000076c98 and cpu addr 0xffffc90004636c98
[ 15.651222] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 15.651235] [drm] Driver supports precise vblank timestamp query.
[ 15.651294] radeon 0000:00:01.0: irq 78 for MSI/MSI-X
[ 15.651331] radeon 0000:00:01.0: radeon: using MSI.
[ 15.651392] [drm] radeon: irq initialized.
[ 15.668744] [drm] ring test on 0 succeeded in 2 usecs
[ 15.668879] [drm] ring test on 1 succeeded in 3 usecs
[ 15.668914] [drm] ring test on 2 succeeded in 3 usecs
[ 15.669225] [drm] ring test on 3 succeeded in 5 usecs
[ 15.669239] [drm] ring test on 4 succeeded in 5 usecs
[ 15.761392] [drm] ring test on 5 succeeded in 1 usecs
[ 15.827305] [drm] UVD initialized successfully.
[ 15.836829] [drm] Enabling audio 0 support
[ 15.836840] [drm] Enabling audio 1 support
[ 15.836845] [drm] Enabling audio 2 support
[ 15.837070] [drm] ib test on ring 0 succeeded in 0 usecs
[ 15.837282] [drm] ib test on ring 1 succeeded in 0 usecs
[ 15.837514] [drm] ib test on ring 2 succeeded in 0 usecs
[ 15.866624] [drm] ib test on ring 3 succeeded in 0 usecs
[ 15.866843] [drm] ib test on ring 4 succeeded in 0 usecs
[ 15.931096] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 15.944735] [drm] ib test on ring 5 succeeded
[ 16.054044] cfg80211: World regulatory domain updated:
[ 16.054056] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 16.054064] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 16.054070] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 16.054075] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 16.054080] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 16.054086] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 16.073486] [drm] radeon atom DIG backlight initialized
[ 16.073501] [drm] Radeon Display Connectors
[ 16.073506] [drm] Connector 0:
[ 16.073512] [drm] LVDS-1
[ 16.073515] [drm] HPD1
[ 16.073522] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[ 16.073525] [drm] Encoders:
[ 16.073528] [drm] LCD1: INTERNAL_UNIPHY
[ 16.073532] [drm] Connector 1:
[ 16.073536] [drm] HDMI-A-1
[ 16.073539] [drm] HPD2
[ 16.073544] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[ 16.073547] [drm] Encoders:
[ 16.073550] [drm] DFP1: INTERNAL_UNIPHY
[ 16.073553] [drm] Connector 2:
[ 16.073557] [drm] VGA-1
[ 16.073562] [drm] DDC: 0x65c0 0x65c0 0x65c4 0x65c4 0x65c8 0x65c8 0x65cc 0x65cc
[ 16.073565] [drm] Encoders:
[ 16.073568] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 16.073770] [drm] Internal thermal controller without fan control
[ 16.074065] [drm] radeon: power management initialized
[ 16.322282] input: HP WMI hotkeys as /devices/virtual/input/input10
[ 17.032904] init: failsafe main process (613) killed by TERM signal
[ 17.116406] [drm] fb mappable at 0x81488000
[ 17.116416] [drm] vram apper at 0x80000000
[ 17.116420] [drm] size 4325376
[ 17.116424] [drm] fb depth is 24
[ 17.116427] [drm] pitch is 5632
[ 17.116814] fbcon: radeondrmfb (fb0) is primary device
[ 17.185890] Console: switching to colour frame buffer device 170x48
[ 17.196206] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[ 17.196213] radeon 0000:00:01.0: registered panic notifier
[ 17.196981] [drm] Initialized radeon 2.36.0 20080528 for 0000:00:01.0 on minor 0
[ 17.197074] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \_SB_.PCI0.SMBS.SMB0 1 (20131115/utaddress-251)
[ 17.197090] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 17.200269] EDAC amd64: DRAM ECC disabled.
[ 17.200288] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 17.200288] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 17.200288] (Note that use of the override may cause unknown side effects.)
[ 17.200718] hda_intel: msi for device 103c:21f7 set to 0
[ 17.200726] hda-intel 0000:00:01.1: Using LPIB position fix
[ 17.205838] hda-intel 0000:00:01.1: Enable sync_write for stable communication
[ 17.236747] HDMI ATI/AMD: no speaker allocation for ELD
[ 17.237138] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input11
[ 17.238809] hda_intel: msi for device 103c:21f7 set to 0
[ 17.238821] hda-intel 0000:00:14.2: Using LPIB position fix
[ 17.253155] hda-intel 0000:00:14.2: Enable sync_write for stable communication
[ 17.282546] SKU: Nid=0x1d sku_cfg=0x40e00001
[ 17.282555] SKU: port_connectivity=0x1
[ 17.282560] SKU: enable_pcbeep=0x0
[ 17.282564] SKU: check_sum=0x00000000
[ 17.282568] SKU: customization=0x00000000
[ 17.282571] SKU: external_amp=0x0
[ 17.282574] SKU: platform_type=0x0
[ 17.282577] SKU: swap=0x0
[ 17.282580] SKU: override=0x1
[ 17.282839] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 17.282850] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 17.282855] hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 17.282858] mono: mono_out=0x0
[ 17.282861] inputs:
[ 17.282866] Mic=0x19
[ 17.282870] Internal Mic=0x12
[ 17.282874] realtek: No valid SSID, checking pincfg 0x40e00001 for NID 0x1d
[ 17.282879] realtek: Enabling init ASM_ID=0x0001 CODEC_ID=10ec0282
[ 17.294288] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
[ 17.297894] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
[ 17.868857] Bluetooth: Core ver 2.17
[ 17.868996] NET: Registered protocol family 31
[ 17.869003] Bluetooth: HCI device and connection manager initialized
[ 17.869922] Bluetooth: HCI socket layer initialized
[ 17.869934] Bluetooth: L2CAP socket layer initialized
[ 17.869953] Bluetooth: SCO socket layer initialized
[ 17.881679] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 17.881691] Bluetooth: BNEP filters: protocol multicast
[ 17.882850] Bluetooth: BNEP socket layer initialized
[ 17.916905] Bluetooth: RFCOMM TTY layer initialized
[ 17.916932] Bluetooth: RFCOMM socket layer initialized
[ 17.916951] Bluetooth: RFCOMM ver 1.11
[ 17.947454] type=1400 audit(1454921196.757:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=726 comm="apparmor_parser"
[ 17.947479] type=1400 audit(1454921196.757:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=726 comm="apparmor_parser"
[ 17.948970] type=1400 audit(1454921196.757:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=726 comm="apparmor_parser"
[ 18.206463] init: cups main process (728) killed by HUP signal
[ 18.206506] init: cups main process ended, respawning
[ 19.078828] r8169 0000:04:00.0 eth0: link down
[ 19.078868] r8169 0000:04:00.0 eth0: link down
[ 19.502237] type=1400 audit(1454921198.313:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=862 comm="apparmor_parser"
[ 20.256530] wlan0: authenticate with 00:24:d4:ce:5b:28
[ 20.279369] wlan0: send auth to 00:24:d4:ce:5b:28 (try 1/3)
[ 20.281431] wlan0: authenticated
[ 20.285811] wlan0: associate with 00:24:d4:ce:5b:28 (try 1/3)
[ 20.290640] wlan0: RX AssocResp from 00:24:d4:ce:5b:28 (capab=0x411 status=0 aid=1)
[ 20.290735] wlan0: associated
[ 20.575436] audit_printk_skb: 102 callbacks suppressed
[ 20.575448] type=1400 audit(1454921199.385:46): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1057 comm="apparmor_parser"
[ 20.706371] r8169 0000:04:00.0 eth0: link up
[ 48.153645] type=1400 audit(1454921226.969:47): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2042 comm="apparmor_parser"
[ 48.153672] type=1400 audit(1454921226.969:48): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2042 comm="apparmor_parser"
[ 48.155013] type=1400 audit(1454921226.969:49): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2042 comm="apparmor_parser"
[ 85.852957] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x0000a400
[ 85.853018] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
[ 85.862330] ath: phy0: Failed to stop TX DMA, queues=0x008!extensions FF : adblock+,greae monkey, locale switcher, no script,tabkit mouse gestures.
TB : "messaging men,u &unity launcher...."
mais je doute que FF et TB soient en cause, je répète que le pc est lent,même à démarrer ou s'arrêter... et que je vois pas (mais c'est qu'une impression) pourquoi une extension ralentirait FF au point que j'aie le temps d'apercevoir une page web non mise en forme,avant que le style ne soit appliqué !
je continue avec
@moko 138
"D'autre part j'attends l'autre moitié du retour : tape M dans la fenêtre de top -d 12. Merci."
désolé, j'avais pas capté que c etaient deux commandes, M & P !
voilà :
top - 10:15:03 up 28 min, 2 users, load average: 0,62, 0,77, 0,74
Tasks: 150 total, 3 running, 147 sleeping, 0 stopped, 0 zombie
%Cpu(s): 3,6 us, 1,6 sy, 0,0 ni, 94,8 id, 0,0 wa, 0,0 hi, 0,0 si, 0,0 st
KiB Mem: 1743980 total, 1561860 used, 182120 free, 30248 buffers
KiB Swap: 1785852 total, 84 used, 1785768 free. 643228 cached Mem
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
2089 nicole 20 0 1542736 474776 59312 S 4,1 27,2 8:14.38 firefox
2358 nicole 20 0 1211980 178284 54520 S 1,0 10,2 0:20.36 thunderbird
1148 root 20 0 343484 54616 22228 S 4,1 3,1 2:17.29 Xorg
1528 nicole 20 0 694572 30552 13984 S 0,0 1,8 0:00.71 blueman-applet
2308 nicole 20 0 624916 29796 15716 S 0,0 1,7 0:04.76 mousepad
1469 nicole 20 0 741216 28796 13208 S 0,0 1,7 0:03.05 xfdesktop
1467 nicole 20 0 793632 23352 16492 S 0,0 1,3 0:08.57 Thunar
1656 nicole 20 0 704564 22088 17184 S 0,0 1,3 0:05.42 panel-1-whisker
1547 nicole 20 0 872516 18468 12228 S 0,0 1,1 0:00.88 nm-applet
1563 nicole 20 0 224264 18188 6692 S 0,0 1,0 0:00.56 applet.py
1711 nicole 20 0 708860 17340 11700 S 0,0 1,0 0:00.70 panel-5-indicat
2158 nicole 20 0 692304 16312 11104 S 1,0 0,9 0:06.36 xfce4-terminal
1490 nicole 20 0 478136 13668 9456 S 0,0 0,8 0:00.40 update-notifier
1457 nicole 20 0 171328 13632 9496 S 0,0 0,8 0:07.93 xfwm4
1465 nicole 20 0 254436 12844 9268 S 0,0 0,7 0:01.99 xfce4-panel
1568 nicole 20 0 337468 8096 5944 S 0,0 0,5 0:00.19 xfsettingsd
1398 nicole 20 0 252852 8092 6404 S 0,0 0,5 0:00.17 xfce4-session@nam1962
"Un test des pilotes Oibaf pourra être judicieux."
ah... ?? j'ai jté un oiel dessus, ca ne me semble pas simple (et j'ai plus trop de temps cette semaine)
Concernant les tests Lubuntu et Xubuntu (lubuntu-15.10-desktop-amd64.iso, lubuntu-15.10-desktop-i386.iso, xubuntu-14.04.3-desktop-i386.iso) :
j'en ai fait pas mal (de tests) hier, avec des livekey persistantes (faites sous w7 avec LiLi), mais j'ai pas assez pris de notes ! malin... faudra que je recommince ! J'ai aussi repartitionné mon disque (bravo GParted) pour laisser de la place à une autre install, stoppée une peu par ignorance,et surtout par fatigue !
En live, la Lubuntu 32 (il me semble) (mais en vesion 15.10 et non 14) allait pas mal (je me réfère toujours au temps mis à obtenir la fenetre de déconnexion/redamarrage/arret...),au temps de lancement de FF.
dernière questions :
- Mais au fait, pourquoi me conseillez-vous une Lub 14 et pas la dernière 15 ?
- quelle différence (visible ou non, supportable ou non) doit on avoir en terme de temps de réponse entre une live et une install disque dur ?
Merci à tous, là, je vais décrocher un peu, des fois faut bosser ! mais ne vous en faites pas,,je lâcherai pas le nonos, faut qu'il tourne ce "P...%§@"!!]&$£| |:-<" de PC !
Hors ligne
#12 Le 08/02/2016, à 12:37
- moko138
Re : Xubuntu lent sur compaq 15-h003sf
Les 15.10 seront périmées dès juillet, les 14.04 sont des lts
- -
Ton dernier retour de top ne recèle pas de gros problème. Je suppose que tu ne l'as pas copié quand ça ramait.
Toutefois,
a) on voit que ton pc avait commencé à swaper. Donne
cat /proc/sys/vm/swappiness.
b) 27% de ta ram pour FFox, on doit pouvoir l'abaisser :
-b1 Tu peux (mais tu le fais sans doute déjà) limiter le nombre d'onglets que tu ouvres simultanément ;
-b2 Dans about:preferences#privacy sous
Barre d'adresse
Lors de l'utilisation de la barre d'adresse, suggérer
tu peux décocher "Historique",
-b3 Dans menu Historique, tu dois surtout alléger ton historique !
c) on lit
up 28 min, 2 usersPermutes-tu entre deux utilisateurs ???
- -
Note que top consommant des queues de cerises, il est utile de le laisser tourner en permanence, prêt, en cas de ralentissement, à indiquer ce qui consomme.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#13 Le 08/02/2016, à 13:05
- nam1962
Re : Xubuntu lent sur compaq 15-h003sf
De mon côté, je ne vois pas de trucs très problématiques dans le démarrage, sauf peut-être les 3 dernières lignes, mais je ne sais pas trop les interpréter.
A tout hasard, passe un
sudo apt-get install linux-firmware-nonfree qui peut installer des pilotes utiles.
...j'aimerais aussi être sûr que tu n'as qu'une seule carte graphique :
lspci | grep "VGA compatible controller"Pour Oibaf, ce n'est pas trop compliqué :---> https://forum.ubuntu-fr.org/viewtopic.php?id=1796371
Sinon, tu peux virer adblock+ pour le remplacer par ublock origin ([url=[modéré : pas d’auto-pub, merci]-ublock-origin-est-beaucoup-plus-leger-que-adblock/]la différence est notable ![/url])
[ Modéré ]
Hors ligne
#14 Le 17/03/2016, à 18:03
- inbox
Re : Xubuntu lent sur compaq 15-h003sf
Salut,
Il faut penser à désactiver les effets graphiques, sous Xubuntu, si ce n'est pas fait.
A+
Un problème résolu ? Indiquez le en modifiant le titre du sujet.
Hors ligne
#15 Le 30/04/2016, à 23:12
- jm69_fr
Re : Xubuntu lent sur compaq 15-h003sf
Bonsoir tout le monde,
vieux motard que j'aimais....
Ma chère épouse ayant supporté pendant des mois un Xubuntu lent à mourir (rien que pour arriver à la fenetre arret/redémarrage, plrs dizaines de secondes, cf debut du post), j'ai fini ce soir par sauvegarder /home, et réinstaller proprement (en effaçant TOUT) Lubuntu.... (puis recopier /home).
Ce qui semble pour l'instant avoir réglé le pb de lenteur tant décrié !! LubuntOuf !
Un truc bizarre : qd on double clique sur une icone du bureau (ffox p.ex.), point de sablier qui indique la validité du double clic... il faut juste attendre qq secondes (sans recliquer...)... Dommage. On s'y fera.
Merci à tous pour votre aide, en février.
Je ne passe pas tout de suite le post en RESOLU, je vais attendre qq jours, on sait jamais !
Hors ligne
Pages : 1