#1 Le 23/03/2016, à 17:48
- elekis
SSD problème de read/write (Exemple ls très lent) Hard resetting link
Bonjour,
J'ai un lenovo yoga 2 sur lequel je viens d'installer ubuntu. Or pour une raison que j'ignore, j'ai l'impression d'avoir des problèmes avec mon ssd.
pour exemple.
* quand je fais un simple ls, de temps en temps ca va vite, de temps en temps cela prends un temps dingue
* autre exemple : creer un fichier (bouton droit nouveau document) ou supprimer un fichier, cela prends un temps tellement grand que je vois la boite de dialogue avec le bouton ou je peux annuler l'opération (ou pour un renommage de fichier idem).
lspci
00:00.0 Host bridge: Intel Corporation Haswell-ULT DRAM Controller (rev 0b)
00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 0b)
00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller (rev 0b)
00:14.0 USB controller: Intel Corporation 8 Series USB xHCI HC (rev 04)
00:16.0 Communication controller: Intel Corporation 8 Series HECI #0 (rev 04)
00:1b.0 Audio device: Intel Corporation 8 Series HD Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 4 (rev e4)
00:1d.0 USB controller: Intel Corporation 8 Series USB EHCI #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation 8 Series LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 8 Series SATA Controller 1 [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 8 Series SMBus Controller (rev 04)
01:00.0 Network controller: Intel Corporation Wireless 7260 (rev 6b)Puis j'ai essayé cette commande.
sudo smartctl -t long -a /dev/sda
elekis@carla:~$ sudo smartctl -a /dev/sda
smartctl 6.4 2014-10-07 r4002 [x86_64-linux-4.2.0-34-generic] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: LITEONIT LGT-256M6G
Serial Number: S0C41198Z1ZSVE018161
Firmware Version: DG86201
User Capacity: 256.060.514.304 bytes [256 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS, ATA/ATAPI-7 T13/1532D revision 4a
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Wed Mar 23 16:44:32 2016 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 10) seconds.
Offline data collection
capabilities: (0x15) SMART execute Offline immediate.
No Auto Offline data collection support.
Abort Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x00) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 10) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
5 Reallocated_Sector_Ct 0x0032 100 100 000 Old_age Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 1512
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 1774
170 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
171 Unknown_Attribute 0x0003 100 100 000 Pre-fail Always - 0
172 Unknown_Attribute 0x0003 100 100 000 Pre-fail Always - 0
173 Unknown_Attribute 0x0003 100 100 000 Pre-fail Always - 35917
174 Unknown_Attribute 0x0003 100 100 000 Pre-fail Always - 67
178 Used_Rsvd_Blk_Cnt_Chip 0x0032 100 100 000 Old_age Always - 0
180 Unused_Rsvd_Blk_Cnt_Tot 0x0033 100 100 010 Pre-fail Always - 1280
184 End-to-End_Error 0x0033 100 100 000 Pre-fail Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
199 UDMA_CRC_Error_Count 0x0003 100 100 000 Pre-fail Always - 7475
233 Media_Wearout_Indicator 0x0003 100 100 000 Pre-fail Always - 8979
241 Total_LBAs_Written 0x0003 100 100 000 Pre-fail Always - 196159
242 Total_LBAs_Read 0x0003 100 100 000 Pre-fail Always - 251579
SMART Error Log Version: 0
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 59397 -
# 2 Extended offline Interrupted (host reset) 10% 59141 -
Selective Self-tests/Logging not supportedelekis@carla:~$ sudo hdparm -Tt /dev/sda
/dev/sda:
Timing cached reads: 13504 MB in 2.00 seconds = 6757.06 MB/sec
Timing buffered disk reads: 684 MB in 3.00 seconds = 227.66 MB/secmais j'avoue que je ne comprends pas tout. dois je m'inquieté ? je lis partout cette fonction TRIM mais je ne comprends ce que c'est. Elle est activée mais .... kesako ?
je rajoute ceci qui provient de dmesg et la cela m'inqiete
[ 54.884223] ata2: hard resetting link
[ 55.212458] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 55.215683] ata2.00: configured for UDMA/133
[ 55.215689] ata2.00: device reported invalid CHS sector 0
[ 55.215697] ata2: EH complete
[ 55.244485] ata2.00: exception Emask 0x10 SAct 0x7fe06007 SErr 0x400100 action 0x6 frozen
[ 55.244490] ata2.00: irq_stat 0x08000000, interface fatal error
[ 55.244493] ata2: SError: { UnrecovData Handshk }
[ 55.244496] ata2.00: failed command: WRITE FPDMA QUEUED
[ 55.244501] ata2.00: cmd 61/01:00:01:08:00/00:00:00:00:00/40 tag 0 ncq 512 out
res 40/00:14:70:08:10/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 55.244504] ata2.00: status: { DRDY }
[ 55.244505] ata2.00: failed command: WRITE FPDMA QUEUED
[ 55.244510] ata2.00: cmd 61/08:08:18:08:10/00:00:00:00:00/40 tag 1 ncq 4096 out
res 40/00:14:70:08:10/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 55.244512] ata2.00: status: { DRDY }
[ 55.244513] ata2.00: failed command: WRITE FPDMA QUEUED
[ 55.244517] ata2.00: cmd 61/08:10:70:08:10/00:00:00:00:00/40 tag 2 ncq 4096 out
res 40/00:14:70:08:10/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 55.244519] ata2.00: status: { DRDY }
[ 55.244521] ata2.00: failed command: READ FPDMA QUEUED
[ 55.244525] ata2.00: cmd 60/00:68:c8:c4:e2/01:00:18:00:00/40 tag 13 ncq 131072 in
res 40/00:14:70:08:10/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 55.244527] ata2.00: status: { DRDY }
[ 55.244528] ata2.00: failed command: READ FPDMA QUEUED
[ 55.244532] ata2.00: cmd 60/80:70:38:6c:68/00:00:00:00:00/40 tag 14 ncq 65536 in
res 40/00:14:70:08:10/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 55.244534] ata2.00: status: { DRDY }
[ 55.244536] ata2.00: failed command: WRITE FPDMA QUEUED
[ 55.244539] ata2.00: cmd 61/08:a8:00:09:10/00:00:0e:00:00/40 tag 21 ncq 4096 out
res 40/00:14:70:08:10/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 55.244541] ata2.00: status: { DRDY }
[ 55.244543] ata2.00: failed command: WRITE FPDMA QUEUED
[ 55.244547] ata2.00: cmd 61/10:b0:40:09:10/00:00:0e:00:00/40 tag 22 ncq 8192 out
res 40/00:14:70:08:10/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 55.244549] ata2.00: status: { DRDY }
[ 55.244550] ata2.00: failed command: WRITE FPDMA QUEUED
[ 55.244554] ata2.00: cmd 61/18:b8:c0:09:10/00:00:0e:00:00/40 tag 23 ncq 12288 out
res 40/00:14:70:08:10/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 55.244556] ata2.00: status: { DRDY }
[ 55.244557] ata2.00: failed command: WRITE FPDMA QUEUED
[ 55.244561] ata2.00: cmd 61/08:c0:10:0a:10/00:00:0e:00:00/40 tag 24 ncq 4096 out
res 40/00:14:70:08:10/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 55.244563] ata2.00: status: { DRDY }
[ 55.244564] ata2.00: failed command: WRITE FPDMA QUEUED
[ 55.244568] ata2.00: cmd 61/08:c8:28:0a:10/00:00:0e:00:00/40 tag 25 ncq 4096 out
res 40/00:14:70:08:10/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 55.244570] ata2.00: status: { DRDY }
[ 55.244571] ata2.00: failed command: WRITE FPDMA QUEUED
[ 55.244575] ata2.00: cmd 61/08:d0:d8:0a:10/00:00:0e:00:00/40 tag 26 ncq 4096 out
res 40/00:14:70:08:10/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 55.244577] ata2.00: status: { DRDY }
[ 55.244578] ata2.00: failed command: WRITE FPDMA QUEUED
[ 55.244582] ata2.00: cmd 61/08:d8:18:0b:10/00:00:0e:00:00/40 tag 27 ncq 4096 out
res 40/00:14:70:08:10/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 55.244584] ata2.00: status: { DRDY }
[ 55.244585] ata2.00: failed command: WRITE FPDMA QUEUED
[ 55.244589] ata2.00: cmd 61/08:e0:28:0b:10/00:00:0e:00:00/40 tag 28 ncq 4096 out
res 40/00:14:70:08:10/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 55.244591] ata2.00: status: { DRDY }
[ 55.244592] ata2.00: failed command: WRITE FPDMA QUEUED
[ 55.244596] ata2.00: cmd 61/10:e8:78:0b:10/00:00:0e:00:00/40 tag 29 ncq 8192 out
res 40/00:14:70:08:10/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 55.244598] ata2.00: status: { DRDY }
[ 55.244599] ata2.00: failed command: WRITE FPDMA QUEUED
[ 55.244603] ata2.00: cmd 61/08:f0:90:0b:10/00:00:0e:00:00/40 tag 30 ncq 4096 out
res 40/00:14:70:08:10/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 55.244605] ata2.00: status: { DRDY }
[ 55.244608] ata2: hard resetting link
[ 55.564706] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 55.567618] ata2.00: configured for UDMA/133
[ 55.567636] ata2: EH complete
[ 55.612696] ata2: limiting SATA link speed to 3.0 Gbps
[ 55.612701] ata2.00: exception Emask 0x10 SAct 0x38 SErr 0x400100 action 0x6 frozen
[ 55.612703] ata2.00: irq_stat 0x08000000, interface fatal error
[ 55.612705] ata2: SError: { UnrecovData Handshk }
[ 55.612707] ata2.00: failed command: READ FPDMA QUEUED
[ 55.612711] ata2.00: cmd 60/00:18:b8:e6:64/01:00:00:00:00/40 tag 3 ncq 131072 in
res 40/00:2c:c8:20:94/00:00:0e:00:00/40 Emask 0x10 (ATA bus error)
[ 55.612712] ata2.00: status: { DRDY }
[ 55.612714] ata2.00: failed command: READ FPDMA QUEUED
[ 55.612716] ata2.00: cmd 60/00:20:d8:7b:25/01:00:00:00:00/40 tag 4 ncq 131072 in
res 40/00:2c:c8:20:94/00:00:0e:00:00/40 Emask 0x10 (ATA bus error)
[ 55.612718] ata2.00: status: { DRDY }
[ 55.612719] ata2.00: failed command: WRITE FPDMA QUEUED
[ 55.612722] ata2.00: cmd 61/90:28:c8:20:94/00:00:0e:00:00/40 tag 5 ncq 73728 out
res 40/00:2c:c8:20:94/00:00:0e:00:00/40 Emask 0x10 (ATA bus error)
[ 55.612723] ata2.00: status: { DRDY }
[ 55.612725] ata2: hard resetting link
[ 55.932996] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 55.935909] ata2.00: configured for UDMA/133
[ 55.935919] ata2: EH complete
[ 725.273674] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4090000 action 0xe frozen
[ 725.273684] ata2: irq_stat 0x00400040, connection status changed
[ 725.273690] ata2: SError: { PHYRdyChg 10B8B DevExch }
[ 725.273698] ata2: hard resetting link
[ 725.996524] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 725.999674] ata2.00: configured for UDMA/133
[ 725.999680] ata2: EH complete
[ 868.746342] input: 00:0C:8A:9C:FC:2C as /devices/virtual/input/input17
[ 2839.699225] [drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in ips_enabled (expected 1, found 0)
[ 2839.699230] ------------[ cut here ]------------
[ 2839.699249] WARNING: CPU: 0 PID: 755 at /build/linux-_Kv5oI/linux-4.2.0/drivers/gpu/drm/i915/intel_display.c:12330 check_crtc_state+0x2c5/0x440 [i915]()
[ 2839.699250] pipe state doesn't match!
[ 2839.699252] Modules linked in: rfcomm rtsx_usb_ms memstick rtsx_usb_sdmmc rtsx_usb binfmt_misc bnep hid_sensor_incl_3d hid_sensor_accel_3d hid_sensor_gyro_3d hid_sensor_rotation hid_sensor_als hid_sensor_magn_3d hid_sensor_trigger hid_sensor_custom industrialio_triggered_buffer kfifo_buf industrialio hid_sensor_iio_common uvcvideo videobuf2_vmalloc btusb videobuf2_memops hid_multitouch videobuf2_core v4l2_common btrtl videodev btbcm hid_sensor_hub btintel media bluetooth arc4 nls_iso8859_1 joydev intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm crct10dif_pclmul crc32_pclmul iwlmvm aesni_intel aes_x86_64 mac80211 lrw gf128mul glue_helper ablk_helper cryptd snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic iwlwifi input_leds serio_raw cfg80211 snd_hda_intel snd_hda_codec
[ 2839.699292] mei_me mei lpc_ich shpchp snd_hda_core snd_soc_rt5640 snd_hwdep snd_soc_rl6231 snd_soc_core snd_compress ac97_bus snd_pcm_dmaengine snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi ideapad_laptop sparse_keymap snd_seq snd_seq_device snd_timer snd dw_dmac dw_dmac_core soundcore snd_soc_sst_acpi i2c_designware_platform 8250_dw i2c_designware_core spi_pxa2xx_platform mac_hid soc_button_array parport_pc ppdev lp parport autofs4 hid_generic usbhid i915 i2c_algo_bit drm_kms_helper psmouse drm ahci libahci sdhci_acpi video sdhci i2c_hid hid
[ 2839.699329] CPU: 0 PID: 755 Comm: Xorg Tainted: G W 4.2.0-34-generic #39-Ubuntu
[ 2839.699331] Hardware name: LENOVO 20344/INVALID, BIOS 96CN29WW(V1.15) 10/16/2014
[ 2839.699332] 0000000000000000 000000001364d472 ffff880157c077c8 ffffffff817ebed3
[ 2839.699336] 0000000000000000 ffff880157c07820 ffff880157c07808 ffffffff8107b986
[ 2839.699338] ffff880157c07848 ffff880157c078b0 ffff880159e4f800 0000000000000001
[ 2839.699341] Call Trace:
[ 2839.699347] [<ffffffff817ebed3>] dump_stack+0x45/0x57
[ 2839.699351] [<ffffffff8107b986>] warn_slowpath_common+0x86/0xc0
[ 2839.699355] [<ffffffff8107ba15>] warn_slowpath_fmt+0x55/0x70
[ 2839.699372] [<ffffffffc01b0b81>] ? intel_pipe_config_compare+0xb31/0xc60 [i915]
[ 2839.699386] [<ffffffffc01b0f75>] check_crtc_state+0x2c5/0x440 [i915]
[ 2839.699406] [<ffffffffc01c4edd>] intel_modeset_check_state+0x21d/0x6d0 [i915]
[ 2839.699423] [<ffffffffc01c6097>] intel_crtc_set_config+0x4c7/0x580 [i915]
[ 2839.699440] [<ffffffffc00b4f75>] ? drm_mode_create+0x25/0x60 [drm]
[ 2839.699455] [<ffffffffc00ae526>] drm_mode_set_config_internal+0x66/0x100 [drm]
[ 2839.699468] [<ffffffffc00b2bb9>] drm_mode_setcrtc+0x3e9/0x500 [drm]
[ 2839.699477] [<ffffffffc00a3505>] drm_ioctl+0x125/0x610 [drm]
[ 2839.699487] [<ffffffffc00b27d0>] ? drm_mode_setplane+0x1b0/0x1b0 [drm]
[ 2839.699492] [<ffffffff81211375>] do_vfs_ioctl+0x295/0x480
[ 2839.699495] [<ffffffff810885a1>] ? __set_task_blocked+0x41/0xa0
[ 2839.699498] [<ffffffff812115d9>] SyS_ioctl+0x79/0x90
[ 2839.699501] [<ffffffff8108b25e>] ? SyS_rt_sigprocmask+0x8e/0xc0
[ 2839.699503] [<ffffffff817f2cf2>] entry_SYSCALL_64_fastpath+0x16/0x75
[ 2839.699505] ---[ end trace 259c436c85b6de83 ]---
[ 2839.729220] [drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in ips_enabled (expected 1, found 0)
[ 2839.729224] ------------[ cut here ]------------
[ 2839.729245] WARNING: CPU: 0 PID: 755 at /build/linux-_Kv5oI/linux-4.2.0/drivers/gpu/drm/i915/intel_display.c:12330 check_crtc_state+0x2c5/0x440 [i915]()
[ 2839.729247] pipe state doesn't match!
[ 2839.729248] Modules linked in: rfcomm rtsx_usb_ms memstick rtsx_usb_sdmmc rtsx_usb binfmt_misc bnep hid_sensor_incl_3d hid_sensor_accel_3d hid_sensor_gyro_3d hid_sensor_rotation hid_sensor_als hid_sensor_magn_3d hid_sensor_trigger hid_sensor_custom industrialio_triggered_buffer kfifo_buf industrialio hid_sensor_iio_common uvcvideo videobuf2_vmalloc btusb videobuf2_memops hid_multitouch videobuf2_core v4l2_common btrtl videodev btbcm hid_sensor_hub btintel media bluetooth arc4 nls_iso8859_1 joydev intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm crct10dif_pclmul crc32_pclmul iwlmvm aesni_intel aes_x86_64 mac80211 lrw gf128mul glue_helper ablk_helper cryptd snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic iwlwifi input_leds serio_raw cfg80211 snd_hda_intel snd_hda_codec
[ 2839.729289] mei_me mei lpc_ich shpchp snd_hda_core snd_soc_rt5640 snd_hwdep snd_soc_rl6231 snd_soc_core snd_compress ac97_bus snd_pcm_dmaengine snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi ideapad_laptop sparse_keymap snd_seq snd_seq_device snd_timer snd dw_dmac dw_dmac_core soundcore snd_soc_sst_acpi i2c_designware_platform 8250_dw i2c_designware_core spi_pxa2xx_platform mac_hid soc_button_array parport_pc ppdev lp parport autofs4 hid_generic usbhid i915 i2c_algo_bit drm_kms_helper psmouse drm ahci libahci sdhci_acpi video sdhci i2c_hid hid
[ 2839.729323] CPU: 0 PID: 755 Comm: Xorg Tainted: G W 4.2.0-34-generic #39-Ubuntu
[ 2839.729324] Hardware name: LENOVO 20344/INVALID, BIOS 96CN29WW(V1.15) 10/16/2014
[ 2839.729326] 0000000000000000 000000001364d472 ffff880157c077c8 ffffffff817ebed3
[ 2839.729329] 0000000000000000 ffff880157c07820 ffff880157c07808 ffffffff8107b986
[ 2839.729332] ffff880157c07848 ffff880157c078b0 ffff880159e4f800 0000000000000001
[ 2839.729334] Call Trace:
[ 2839.729341] [<ffffffff817ebed3>] dump_stack+0x45/0x57
[ 2839.729345] [<ffffffff8107b986>] warn_slowpath_common+0x86/0xc0
[ 2839.729348] [<ffffffff8107ba15>] warn_slowpath_fmt+0x55/0x70
[ 2839.729366] [<ffffffffc01b0b81>] ? intel_pipe_config_compare+0xb31/0xc60 [i915]
[ 2839.729380] [<ffffffffc01b0f75>] check_crtc_state+0x2c5/0x440 [i915]
[ 2839.729400] [<ffffffffc01c4edd>] intel_modeset_check_state+0x21d/0x6d0 [i915]
[ 2839.729416] [<ffffffffc01c6097>] intel_crtc_set_config+0x4c7/0x580 [i915]
[ 2839.729432] [<ffffffffc00b4f75>] ? drm_mode_create+0x25/0x60 [drm]
[ 2839.729444] [<ffffffffc00ae526>] drm_mode_set_config_internal+0x66/0x100 [drm]
[ 2839.729456] [<ffffffffc00b2bb9>] drm_mode_setcrtc+0x3e9/0x500 [drm]
[ 2839.729465] [<ffffffffc00a3505>] drm_ioctl+0x125/0x610 [drm]
[ 2839.729475] [<ffffffffc00b27d0>] ? drm_mode_setplane+0x1b0/0x1b0 [drm]
[ 2839.729479] [<ffffffff81211375>] do_vfs_ioctl+0x295/0x480
[ 2839.729483] [<ffffffff810885a1>] ? __set_task_blocked+0x41/0xa0
[ 2839.729486] [<ffffffff812115d9>] SyS_ioctl+0x79/0x90
[ 2839.729489] [<ffffffff817f2cf2>] entry_SYSCALL_64_fastpath+0x16/0x75
[ 2839.729491] ---[ end trace 259c436c85b6de84 ]---
[ 2839.836668] ata2: exception Emask 0x50 SAct 0x0 SErr 0x4090800 action 0xe frozen
[ 2839.836674] ata2: irq_stat 0x00400040, connection status changed
[ 2839.836676] ata2: SError: { HostInt PHYRdyChg 10B8B DevExch }
[ 2839.836681] ata2: hard resetting link
[ 2840.559898] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 2840.563031] ata2.00: configured for UDMA/133
[ 2840.563036] ata2: EH complete
[ 3662.843727] xhci_hcd 0000:00:14.0: WARN Event TRB for slot 2 ep 1 with no TDs queued?
[ 6222.040163] perf interrupt took too long (2508 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[ 7398.088523] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4090000 action 0xe frozen
[ 7398.088528] ata2: irq_stat 0x00400040, connection status changed
[ 7398.088531] ata2: SError: { PHYRdyChg 10B8B DevExch }
[ 7398.088535] ata2: hard resetting link
[ 7398.814895] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 7398.817923] ata2.00: configured for UDMA/133
[ 7398.817934] ata2: EH complete
[ 7460.988863] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4090000 action 0xe frozen
[ 7460.988872] ata2: irq_stat 0x00400040, connection status changed
[ 7460.988876] ata2: SError: { PHYRdyChg 10B8B DevExch }
[ 7460.988883] ata2: hard resetting link
[ 7461.709831] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 7461.712869] ata2.00: configured for UDMA/133
[ 7461.712877] ata2: EH complete
[ 7614.406386] ata2: exception Emask 0x50 SAct 0x0 SErr 0x4090800 action 0xe frozen
[ 7614.406391] ata2: irq_stat 0x00400040, connection status changed
[ 7614.406394] ata2: SError: { HostInt PHYRdyChg 10B8B DevExch }
[ 7614.406398] ata2: hard resetting link
[ 7615.454286] ata2: SATA link down (SStatus 0 SControl 320)
[ 7620.458306] ata2: hard resetting link
[ 7620.782594] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 7620.785638] ata2.00: configured for UDMA/133
[ 7620.785644] ata2: EH completemerci
Dernière modification par elekis (Le 23/03/2016, à 18:22)
http://twoji.deviantart.com/
Hors ligne