Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 05/09/2016, à 17:38

patmeu

démarrage ubuntu 16.04 [résolu]

Bonjour,
J'ai installé Ubuntu 16.04 LTS au moyen de la mise à jour et après la demande "voulez vous installer la nouvelle version de Ubuntu?"
Depuis. la machine met 45 minutes environ à démarrer, après tout fonctionne normalement et vite.
Machine HP Pavilion 20 IAO. Il n'y a que Ubuntu sur le machine.
On peut démarrer plus vite en utilisant la commande de "démarrage par options avancées" mais seul l'option "generic 3.03" fonctionne, pas upstart ni recovery
Comment puis corriger cela?
Cordialement
Patrice

Dernière modification par patmeu (Le 10/04/2019, à 23:28)

Hors ligne

#2 Le 05/09/2016, à 17:39

patmeu

Re : démarrage ubuntu 16.04 [résolu]

correction generic 3.13 fonctionne pas 3.03

Hors ligne

#3 Le 05/09/2016, à 17:46

malbo

Re : démarrage ubuntu 16.04 [résolu]

C'est quoi le processeur ? La carte graphique ?

Hors ligne

#4 Le 05/09/2016, à 20:16

patmeu

Re : démarrage ubuntu 16.04 [résolu]

Carte Gallium 0.4 on AMD PALM (DRM 2.36.0, LLVM 3.8.0)
processeur AMD E1-1500 APU with Radeon(tm) HD Graphics × 2

Hors ligne

#5 Le 06/09/2016, à 07:08

malbo

Re : démarrage ubuntu 16.04 [résolu]

Je te prie de réaliser une Live USB Ubuntu 16.04.1 64 bits en suivant cette recette : https://forum.ubuntu-fr.org/viewtopic.p … #p21556450
Puis de démarrer ton ordi sur cette liveUSB en session live (essayer sans installer) et faire un Boot-Info depuis cette session live. Enfin, donner l'URL de ce Boot-Info dans ta réponse.

Hors ligne

#6 Le 06/09/2016, à 09:29

patmeu

Re : démarrage ubuntu 16.04 [résolu]

Merci je suis en train de télécharger Ubuntu 16.04.1
J'ai cependant un peu testé les différents mode de démarrage au préalable.
j'ai vu que:
- aucun UEFI ne fonctionne.
- quand j'enlève une clé USB le temps de démarrage tombe à 10 mn.

J'ai l’impression que le système ne boot pas sur le bon fichier.
A bientôt.

Patrice

Hors ligne

#7 Le 06/09/2016, à 13:22

Bougron

Re : démarrage ubuntu 16.04 [résolu]

Bonjour
Tu peux regarder cette discussion  pour t'inspirer. https://forum.ubuntu-fr.org/viewtopic.php?id=1995551

Hors ligne

#8 Le 07/09/2016, à 07:48

patmeu

Re : démarrage ubuntu 16.04 [résolu]

J'ai fait boot-info et j'ai l'URL suivant.


http://paste2.org/Wb3nKjIw


Quid?
Cordialement.
Patrice




http://paste2.org/Wb3nKjIw

Hors ligne

#9 Le 07/09/2016, à 08:03

patmeu

Re : démarrage ubuntu 16.04 [résolu]

Pour Malbo.
En complément la clé USB 2Go sur port C est sur un hub 6 emplacements.
Patrice

Hors ligne

#10 Le 07/09/2016, à 08:27

moko138

Re : démarrage ubuntu 16.04 [résolu]

Que répond

free -h

?


%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel :  À la découverte de dcraw

Hors ligne

#11 Le 07/09/2016, à 08:31

moko138

Re : démarrage ubuntu 16.04 [résolu]

malbo a écrit :

Je te prie de réaliser une Live USB Ubuntu 16.04.1 64 bits en suivant cette recette : https://forum.ubuntu-fr.org/viewtopic.p … #p21556450
Puis de démarrer ton ordi sur cette liveUSB en session live (essayer sans installer) et faire un Boot-Info depuis cette session live. Enfin, donner l'URL de ce Boot-Info dans ta réponse.

Or on lit :

=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.
SecureBoot enabled.


%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel :  À la découverte de dcraw

Hors ligne

#12 Le 07/09/2016, à 09:18

malbo

Re : démarrage ubuntu 16.04 [résolu]

Le Boot-Info dont tu as donné le lien dans le post #8 est là :

 Boot Info Script cfd9efe + Boot-Repair extra info      [Boot-Info 26Apr2016]


============================= Boot Info Summary: ===============================

 => No boot loader is installed in the MBR of /dev/sda.
 => No boot loader is installed in the MBR of /dev/sdb.
 => No known boot loader is installed in the MBR of /dev/sdc.

sda1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  FAT32
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /EFI/Boot/bootx64.efi /EFI/ubuntu/MokManager.efi 
                       /EFI/ubuntu/fwupx64.efi /EFI/ubuntu/grubx64.efi 
                       /EFI/ubuntu/shimx64.efi 
                       /EFI/Microsoft/Boot/bootmgfw.efi 
                       /EFI/Microsoft/Boot/bootx64.efi

sda2: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 16.04.1 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab

sda3: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sdb1: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 2000/XP: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sdc1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  FAT32
    Boot sector info:  According to the info in the boot sector, sdc1 starts 
                       at sector 0. But according to the info from fdisk, 
                       sdc1 starts at sector 32.
    Operating System:  
    Boot files:        

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________
Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1                   1 1,953,525,167 1,953,525,167  ee GPT


GUID Partition Table detected.

Partition  Attrs   Start Sector    End Sector  # of Sectors System
/dev/sda1                 2,048     1,050,623     1,048,576 EFI System partition
/dev/sda2             1,050,624 1,946,009,599 1,944,958,976 Data partition (Linux)
/dev/sda3         1,946,009,600 1,953,523,711     7,514,112 Swap partition (Linux)

Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set

Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 186.3 GiB, 200049647616 bytes, 390721968 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdb1                  63   390,716,864   390,716,802   7 NTFS / exFAT / HPFS


Drive: sdc _____________________________________________________________________
Disk /dev/sdc: 7.7 GiB, 8254390272 bytes, 16121856 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdc1                  32    16,121,855    16,121,824   c W95 FAT32 (LBA)


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/sda1        2C62-36A3                              vfat       
/dev/sda2        7f6cc3bb-aa02-45f3-a475-e5d0691be909   ext4       
/dev/sda3        987ee8fe-5bf8-4136-9e63-93425928db3e   swap       
/dev/sdb1        5C38F47D38F4580A                       ntfs       TREKSTOR
/dev/sdc1        2B67-58C5                              vfat       tele8Go

========================= "ls -l /dev/disk/by-id" output: ======================

total 0
lrwxrwxrwx 1 root root  9 Sep  7 07:42 ata-ST1000DM003-1CH162_Z1D704N5 -> ../../sda
lrwxrwxrwx 1 root root 10 Sep  7 07:42 ata-ST1000DM003-1CH162_Z1D704N5-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Sep  7 07:42 ata-ST1000DM003-1CH162_Z1D704N5-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Sep  7 07:42 ata-ST1000DM003-1CH162_Z1D704N5-part3 -> ../../sda3
lrwxrwxrwx 1 root root  9 Sep  7 07:42 ata-TOSHIBA_MK2035GSS_87SUF4MAS -> ../../sdb
lrwxrwxrwx 1 root root 10 Sep  7 07:42 ata-TOSHIBA_MK2035GSS_87SUF4MAS-part1 -> ../../sdb1
lrwxrwxrwx 1 root root  9 Sep  7 07:20 ata-hp_DVDRAM_GT80N_335C0067566 -> ../../sr0
lrwxrwxrwx 1 root root  9 Sep  7 07:42 usb-_USB_DISK_2.0_077A144B000C-0:0 -> ../../sdc
lrwxrwxrwx 1 root root 10 Sep  7 07:42 usb-_USB_DISK_2.0_077A144B000C-0:0-part1 -> ../../sdc1
lrwxrwxrwx 1 root root  9 Sep  7 07:42 wwn-0x5000c50064ef2e97 -> ../../sda
lrwxrwxrwx 1 root root 10 Sep  7 07:42 wwn-0x5000c50064ef2e97-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Sep  7 07:42 wwn-0x5000c50064ef2e97-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Sep  7 07:42 wwn-0x5000c50064ef2e97-part3 -> ../../sda3
lrwxrwxrwx 1 root root  9 Sep  7 07:20 wwn-0x5001480000000000 -> ../../sr0

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/sda1        /boot/efi                vfat       (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/sda2        /                        ext4       (rw,relatime,errors=remount-ro,data=ordered)
/dev/sdb1        /media/neumann/TREKSTOR2 fuseblk    (rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096,uhelper=udisks2)
/dev/sdc1        /media/neumann/tele8Go   vfat       (rw,nosuid,nodev,relatime,uid=1000,gid=1000,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,showexec,utf8,flush,errors=remount-ro,uhelper=udisks2)


=========================== sda2/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  7f6cc3bb-aa02-45f3-a475-e5d0691be909
else
  search --no-floppy --fs-uuid --set=root 7f6cc3bb-aa02-45f3-a475-e5d0691be909
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=30
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=menu
    set timeout=10
  # Fallback normal timeout code in case the timeout_style feature is
  # unavailable.
  else
    set timeout=10
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
  clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-7f6cc3bb-aa02-45f3-a475-e5d0691be909' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_gpt
	insmod ext2
	set root='hd0,gpt2'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  7f6cc3bb-aa02-45f3-a475-e5d0691be909
	else
	  search --no-floppy --fs-uuid --set=root 7f6cc3bb-aa02-45f3-a475-e5d0691be909
	fi
	linux	/boot/vmlinuz-4.4.0-36-generic.efi.signed root=UUID=7f6cc3bb-aa02-45f3-a475-e5d0691be909 ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-4.4.0-36-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-7f6cc3bb-aa02-45f3-a475-e5d0691be909' {
	menuentry 'Ubuntu, avec Linux 4.4.0-36-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-36-generic-advanced-7f6cc3bb-aa02-45f3-a475-e5d0691be909' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  7f6cc3bb-aa02-45f3-a475-e5d0691be909
		else
		  search --no-floppy --fs-uuid --set=root 7f6cc3bb-aa02-45f3-a475-e5d0691be909
		fi
		echo	'Chargement de Linux 4.4.0-36-generic…'
		linux	/boot/vmlinuz-4.4.0-36-generic.efi.signed root=UUID=7f6cc3bb-aa02-45f3-a475-e5d0691be909 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.4.0-36-generic
	}
	menuentry 'Ubuntu, with Linux 4.4.0-36-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-36-generic-init-upstart-7f6cc3bb-aa02-45f3-a475-e5d0691be909' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  7f6cc3bb-aa02-45f3-a475-e5d0691be909
		else
		  search --no-floppy --fs-uuid --set=root 7f6cc3bb-aa02-45f3-a475-e5d0691be909
		fi
		echo	'Chargement de Linux 4.4.0-36-generic…'
		linux	/boot/vmlinuz-4.4.0-36-generic.efi.signed root=UUID=7f6cc3bb-aa02-45f3-a475-e5d0691be909 ro  quiet splash $vt_handoff init=/sbin/upstart
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.4.0-36-generic
	}
	menuentry 'Ubuntu, with Linux 4.4.0-36-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-36-generic-recovery-7f6cc3bb-aa02-45f3-a475-e5d0691be909' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  7f6cc3bb-aa02-45f3-a475-e5d0691be909
		else
		  search --no-floppy --fs-uuid --set=root 7f6cc3bb-aa02-45f3-a475-e5d0691be909
		fi
		echo	'Chargement de Linux 4.4.0-36-generic…'
		linux	/boot/vmlinuz-4.4.0-36-generic.efi.signed root=UUID=7f6cc3bb-aa02-45f3-a475-e5d0691be909 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.4.0-36-generic
	}
	menuentry 'Ubuntu, avec Linux 4.4.0-34-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-34-generic-advanced-7f6cc3bb-aa02-45f3-a475-e5d0691be909' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  7f6cc3bb-aa02-45f3-a475-e5d0691be909
		else
		  search --no-floppy --fs-uuid --set=root 7f6cc3bb-aa02-45f3-a475-e5d0691be909
		fi
		echo	'Chargement de Linux 4.4.0-34-generic…'
		linux	/boot/vmlinuz-4.4.0-34-generic.efi.signed root=UUID=7f6cc3bb-aa02-45f3-a475-e5d0691be909 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.4.0-34-generic
	}
	menuentry 'Ubuntu, with Linux 4.4.0-34-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-34-generic-init-upstart-7f6cc3bb-aa02-45f3-a475-e5d0691be909' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  7f6cc3bb-aa02-45f3-a475-e5d0691be909
		else
		  search --no-floppy --fs-uuid --set=root 7f6cc3bb-aa02-45f3-a475-e5d0691be909
		fi
		echo	'Chargement de Linux 4.4.0-34-generic…'
		linux	/boot/vmlinuz-4.4.0-34-generic.efi.signed root=UUID=7f6cc3bb-aa02-45f3-a475-e5d0691be909 ro  quiet splash $vt_handoff init=/sbin/upstart
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.4.0-34-generic
	}
	menuentry 'Ubuntu, with Linux 4.4.0-34-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-34-generic-recovery-7f6cc3bb-aa02-45f3-a475-e5d0691be909' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  7f6cc3bb-aa02-45f3-a475-e5d0691be909
		else
		  search --no-floppy --fs-uuid --set=root 7f6cc3bb-aa02-45f3-a475-e5d0691be909
		fi
		echo	'Chargement de Linux 4.4.0-34-generic…'
		linux	/boot/vmlinuz-4.4.0-34-generic.efi.signed root=UUID=7f6cc3bb-aa02-45f3-a475-e5d0691be909 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.4.0-34-generic
	}
	menuentry 'Ubuntu, avec Linux 3.13.0-93-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-93-generic-advanced-7f6cc3bb-aa02-45f3-a475-e5d0691be909' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  7f6cc3bb-aa02-45f3-a475-e5d0691be909
		else
		  search --no-floppy --fs-uuid --set=root 7f6cc3bb-aa02-45f3-a475-e5d0691be909
		fi
		echo	'Chargement de Linux 3.13.0-93-generic…'
		linux	/boot/vmlinuz-3.13.0-93-generic.efi.signed root=UUID=7f6cc3bb-aa02-45f3-a475-e5d0691be909 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.13.0-93-generic
	}
	menuentry 'Ubuntu, with Linux 3.13.0-93-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-93-generic-init-upstart-7f6cc3bb-aa02-45f3-a475-e5d0691be909' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  7f6cc3bb-aa02-45f3-a475-e5d0691be909
		else
		  search --no-floppy --fs-uuid --set=root 7f6cc3bb-aa02-45f3-a475-e5d0691be909
		fi
		echo	'Chargement de Linux 3.13.0-93-generic…'
		linux	/boot/vmlinuz-3.13.0-93-generic.efi.signed root=UUID=7f6cc3bb-aa02-45f3-a475-e5d0691be909 ro  quiet splash $vt_handoff init=/sbin/upstart
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.13.0-93-generic
	}
	menuentry 'Ubuntu, with Linux 3.13.0-93-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-93-generic-recovery-7f6cc3bb-aa02-45f3-a475-e5d0691be909' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  7f6cc3bb-aa02-45f3-a475-e5d0691be909
		else
		  search --no-floppy --fs-uuid --set=root 7f6cc3bb-aa02-45f3-a475-e5d0691be909
		fi
		echo	'Chargement de Linux 3.13.0-93-generic…'
		linux	/boot/vmlinuz-3.13.0-93-generic.efi.signed root=UUID=7f6cc3bb-aa02-45f3-a475-e5d0691be909 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.13.0-93-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/25_custom ###

menuentry "EFI/ubuntu/fwupx64.efi" {
search --fs-uuid --no-floppy --set=root 2C62-36A3
chainloader (${root})/EFI/ubuntu/fwupx64.efi
}

menuentry "EFI/ubuntu/MokManager.efi" {
search --fs-uuid --no-floppy --set=root 2C62-36A3
chainloader (${root})/EFI/ubuntu/MokManager.efi
}
### END /etc/grub.d/25_custom ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
	fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda2/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda2 during installation
UUID=7f6cc3bb-aa02-45f3-a475-e5d0691be909 /               ext4    errors=remount-ro 0       1
# /boot/efi was on /dev/sda1 during installation
#UUID=2C62-36A3  /boot/efi       vfat    defaults        0       1
# swap was on /dev/sda3 during installation
UUID=987ee8fe-5bf8-4136-9e63-93425928db3e none            swap    sw              0       0
UUID=2C62-36A3	/boot/efi	vfat	defaults	0	1
--------------------------------------------------------------------------------

=================== sda2: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

  70.088886261 = 75.257368576   boot/grub/grub.cfg                             1
  12.965816498 = 13.921939456   boot/vmlinuz-3.13.0-93-generic                 2
 250.795475006 = 269.289590784  boot/vmlinuz-3.13.0-93-generic.efi.signed      1
  32.374725342 = 34.762096640   boot/vmlinuz-4.4.0-34-generic                  1
   1.015350342 = 1.090224128    boot/vmlinuz-4.4.0-34-generic.efi.signed       2
  32.541389465 = 34.941050880   boot/vmlinuz-4.4.0-36-generic                  1
  33.163787842 = 35.609346048   boot/vmlinuz-4.4.0-36-generic.efi.signed       1
  32.541389465 = 34.941050880   vmlinuz                                        1
  32.374725342 = 34.762096640   vmlinuz.old                                    1
 250.798477173 = 269.292814336  boot/initrd.img-3.13.0-93-generic              2
   1.651195526 = 1.772957696    boot/initrd.img-4.4.0-34-generic               2
  33.265117645 = 35.718148096   boot/initrd.img-4.4.0-36-generic               3
  33.265117645 = 35.718148096   initrd.img                                     3
   1.651195526 = 1.772957696    initrd.img.old                                 2

======================== Unknown MBRs/Boot Sectors/etc: ========================

Unknown MBR on /dev/sdc

00000000  fa be 00 7c bf 00 7a b9  00 01 fc 0e 1f 0e 07 f3  |...|..z.........|
00000010  a5 ea 16 7a 00 00 bb be  7b 33 c9 80 3f 80 75 06  |...z....{3..?.u.|
00000020  fe c5 8b f3 eb 07 80 3f  00 75 02 fe c1 83 c3 10  |.......?.u......|
00000030  81 fb fe 7b 72 e5 83 f9  04 74 0b 81 f9 03 01 74  |...{r....t.....t|
00000040  0a bb a5 7a eb 2c bb 87  7a eb 27 8b 4c 02 8b 14  |...z.,..z.'.L...|
00000050  b8 01 02 bb 00 7c cd 13  73 05 bb bc 7a eb 13 2e  |.....|..s...z...|
00000060  a1 fe 7d 3d 55 aa 74 05  bb bc 7a eb 05 ea 00 7c  |..}=U.t...z....||
00000070  00 00 2e 8a 07 3c 00 74  0c 53 bb 07 00 b4 0e cd  |.....<.t.S......|
00000080  10 5b 43 eb ed eb fe 4e  6f 20 62 6f 6f 74 61 62  |.[C....No bootab|
00000090  6c 65 20 70 61 72 74 69  74 6f 6e 20 69 6e 20 74  |le partiton in t|
000000a0  61 62 6c 65 00 49 6e 76  61 6c 69 64 20 50 61 72  |able.Invalid Par|
000000b0  74 69 74 6f 6e 20 74 61  62 6c 65 00 49 6e 76 61  |titon table.Inva|
000000c0  6c 69 64 20 6f 72 20 64  61 6d 61 67 65 64 20 42  |lid or damaged B|
000000d0  6f 6f 74 61 62 6c 65 20  70 61 72 74 69 74 69 6f  |ootable partitio|
000000e0  6e 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |n...............|
000000f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000100  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000110  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000120  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000130  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000140  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000150  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000160  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000170  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000180  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000190  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001a0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001b0  00 00 00 00 00 00 00 00  83 d4 04 36 00 00 00 01  |...........6....|
000001c0  01 00 0c 0f a0 ff 20 00  00 00 e0 ff f5 00 00 00  |...... .........|
000001d0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200



ADDITIONAL INFORMATION :
=================== log of boot-info 2016-09-07__07h42 ===================
boot-info version : 4ppa38
boot-sav version : 4ppa38
glade2script version : 3.2.3~ppa1
boot-sav-extra version : 4ppa38
boot-info is executed in installed-session (Ubuntu 16.04.1 LTS, xenial, Ubuntu, x86_64)
CPU op-mode(s):        32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-4.4.0-36-generic.efi.signed root=UUID=7f6cc3bb-aa02-45f3-a475-e5d0691be909 ro quiet splash vt.handoff=7

=================== os-prober:
/dev/sda2:L'OS actuellement utilisé - Ubuntu 16.04.1 LTS CurrentSession:linux

=================== blkid:
/dev/sda1: UUID="2C62-36A3" TYPE="vfat" PARTUUID="e093bdd6-e18d-41f3-a8a8-d596efcb86a6"
/dev/sda2: UUID="7f6cc3bb-aa02-45f3-a475-e5d0691be909" TYPE="ext4" PARTUUID="f116d354-710b-44ff-8d0f-ee496b116f7f"
/dev/sda3: UUID="987ee8fe-5bf8-4136-9e63-93425928db3e" TYPE="swap" PARTUUID="65f9b7b8-111d-416a-8253-c593f3d7bfbd"
/dev/sdb1: LABEL="TREKSTOR" UUID="5C38F47D38F4580A" TYPE="ntfs" PARTUUID="01f7d1ce-01"
/dev/sdc1: LABEL="tele8Go" UUID="2B67-58C5" TYPE="vfat" PARTUUID="3604d483-01"


1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.


=================== /etc/grub.d/ :
drwxr-xr-x  2 root root      4096 sept.  3 08:39 grub.d
total 80
-rwxr-xr-x 1 root root  9791 déc.  17  2015 00_header
-rwxr-xr-x 1 root root  6258 mars  15 19:08 05_debian_theme
-rwxr-xr-x 1 root root 12261 juil. 23 02:09 10_linux
-rwxr-xr-x 1 root root 11082 juil. 23 02:09 20_linux_xen
-rwxr-xr-x 1 root root  1992 mars  12  2014 20_memtest86+
-rwxr-xr-x 1 root root   305 sept.  3 08:39 25_custom
-rwxr-xr-x 1 root root 11692 avril 11  2014 30_os-prober
-rwxr-xr-x 1 root root  1418 août   2 09:27 30_uefi-firmware
-rwxr-xr-x 1 root root   214 avril 11  2014 40_custom
-rwxr-xr-x 1 root root   216 avril 11  2014 41_custom
-rw-r--r-- 1 root root   483 avril 11  2014 README




=================== /etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"



/boot/efi detected in the fstab of sda2: UUID=2C62-36A3	 (sda1)
Presence of EFI/Microsoft file detected: /boot/efi/EFI/Microsoft/Boot/bootmgfw.efi
Presence of EFI/Microsoft file detected: /boot/efi/EFI/Microsoft/Boot/bootx64.efi
Presence of EFI/Boot file detected: /boot/efi/EFI/Boot/bootx64.efi

=================== efibootmgr -v
BootCurrent: 0003
Timeout: 2 seconds
BootOrder: 0003,0000,0001,0002,0007,0008,0004,0005,0006,0009,000A,000B
Boot0000* Windows Boot Manager	HD(2,GPT,b0b7c010-0c88-44cf-b75d-307dc560088a,0x200000,0xb4000)/File(EFIMicrosoftBootbootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}....................
Boot0001* USB Floppy/CD	VenMedia(b6fef66f-1495-4584-a836-3492d1984a8d,0500000001)AMBO
Boot0002* USB Hard Drive	VenMedia(b6fef66f-1495-4584-a836-3492d1984a8d,0200000001)AMBO
Boot0003* ubuntu	HD(1,GPT,e093bdd6-e18d-41f3-a8a8-d596efcb86a6,0x800,0x100000)/File(EFIubuntushimx64.efi)
Boot0004  CD/DVD Drive 	BBS(CDROM,,0x0)AMGOAMNO........o.h.p. . . . . . . .D.V.D.R.A.M. .G.T.8.0.N....................A...........................>..Gd-.;.A..MQ..L.3.3.C.5.0.0.7.6.6.5. .6. . . . . . . . ......AMBO
Boot0005  USB Floppy/CD	VenMedia(b6fef66f-1495-4584-a836-3492d1984a8d,0500000000)AMBO
Boot0006  Hard Drive	BBS(HD,,0x0)AMGOAMNO........o.S.T.1.0.0.0.D.M.0.0.3.-.1.C.H.1.6.2....................A...........................>..Gd-.;.A..MQ..L.1.Z.7.D.4.0.5.N. . . . . . . . . . . . ......AMBOAMNO........m.G.e.n.e.r.i.c. .E.x.t.e.r.n.a.l. .1...0.4....................A.......................@..Gd-.;.A..MQ..L.G.e.n.e.r.i.c. .E.x.t.e.r.n.a.l. .1...0.4......AMBOAMNOq.......S.G. .&. .T....................A............................. ..Gd-.;.A..MQ..L.G. .&. .T......AMBO
Boot0007* UEFI: IPv4 Realtek Ethernet Controller	PciRoot(0x0)/Pci(0x15,0x0)/Pci(0x0,0x0)/MAC(54bef71607f2,0)/IPv4(0.0.0.0:0<->0.0.0.0:0,0,0)AMBO
Boot0008* UEFI: IPv6 Realtek Ethernet Controller	PciRoot(0x0)/Pci(0x15,0x0)/Pci(0x0,0x0)/MAC(54bef71607f2,0)/IPv6([::]:<->[::]:,0,0)AMBO
Boot0009* UEFI:CD/DVD Drive	BBS(129,,0x0)
Boot000A* UEFI:Removable Device	BBS(130,,0x0)
Boot000B* UEFI:Network Device	BBS(131,,0x0)

=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.
SecureBoot enabled.


=================== PARTITIONS & DISKS:
sda2	: sda,	not-sepboot,	grubenv-ok	grub2,	signed grub-efi ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-has-goodEFI,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	.
sda1	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	is-correct-EFI,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	/boot/efi.
sdb1	: sdb,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	/media/neumann/TREKSTOR2.
sdc1	: sdc,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	/media/neumann/tele8Go.

sda	: GPT,	no-BIOS_boot,	has-correctEFI, 	not-usb,	has-os,	2048 sectors * 512 bytes
sdb	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	not-usb,	no-os,	63 sectors * 512 bytes
sdc	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	usb-disk,	no-os,	32 sectors * 512 bytes


=================== parted -l:

Model: ATA ST1000DM003-1CH1 (scsi)
Disk /dev/sda: 1000GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt
Disk Flags:

Number  Start   End     Size    File system     Name  Flags
1      1049kB  538MB   537MB   fat32                 boot, esp
2      538MB   996GB   996GB   ext4
3      996GB   1000GB  3847MB  linux-swap(v1)


Model: Generic External (scsi)
Disk /dev/sdb: 200GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Disk Flags:

Number  Start   End    Size   Type     File system  Flags
1      32.3kB  200GB  200GB  primary  ntfs


Model:  USB DISK 2.0 (scsi)
Disk /dev/sdc: 8254MB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Disk Flags:

Number  Start   End     Size    Type     File system  Flags
1      16.4kB  8254MB  8254MB  primary  fat32        lba

=================== parted -lm:

BYT;
/dev/sda:1000GB:scsi:512:4096:gpt:ATA ST1000DM003-1CH1:;
1:1049kB:538MB:537MB:fat32::boot, esp;
2:538MB:996GB:996GB:ext4::;
3:996GB:1000GB:3847MB:linux-swap(v1)::;

BYT;
/dev/sdb:200GB:scsi:512:512:msdos:Generic External:;
1:32.3kB:200GB:200GB:ntfs::;

BYT;
/dev/sdc:8254MB:scsi:512:512:msdos: USB DISK 2.0:;
1:16.4kB:8254MB:8254MB:fat32::lba;

=================== lsblk:
KNAME TYPE FSTYPE   SIZE LABEL
sda   disk        931,5G
sda1  part vfat     512M
sda2  part ext4   927,4G
sda3  part swap     3,6G
sdb   disk        186,3G
sdb1  part ntfs   186,3G TREKSTOR
sdc   disk          7,7G
sdc1  part vfat     7,7G tele8Go
sr0   rom          1024M

KNAME ROTA RO RM STATE   MOUNTPOINT
sda      1  0  0 running
sda1     1  0  0         /boot/efi
sda2     1  0  0         /
sda3     1  0  0         [SWAP]
sdb      1  0  0 running
sdb1     1  0  0         /media/neumann/TREKSTOR2
sdc      1  0  1 running
sdc1     1  0  1         /media/neumann/tele8Go
sr0      1  0  1 running


=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=1788716k,nr_inodes=447179,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=361624k,mode=755)
/dev/sda2 on / type ext4 (rw,relatime,errors=remount-ro,data=ordered)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (rw,mode=755)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/lib/systemd/systemd-cgroups-agent,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
efivarfs on /sys/firmware/efi/efivars type efivarfs (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids,release_agent=/run/cgmanager/agents/cgm-release-agent.pids)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset,clone_children)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb,release_agent=/run/cgmanager/agents/cgm-release-agent.hugetlb)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event,release_agent=/run/cgmanager/agents/cgm-release-agent.perf_event)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=32,pgrp=1,timeout=0,minproto=5,maxproto=5,direct)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime)
mqueue on /dev/mqueue type mqueue (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
/dev/sda1 on /boot/efi type vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,relatime)
cgmfs on /run/cgmanager/fs type tmpfs (rw,relatime,size=100k,mode=755)
tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=361624k,mode=700,uid=1000,gid=1000)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000)
/dev/sdc1 on /media/neumann/tele8Go type vfat (rw,nosuid,nodev,relatime,uid=1000,gid=1000,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,showexec,utf8,flush,errors=remount-ro,uhelper=udisks2)
/dev/sdb1 on /media/neumann/TREKSTOR2 type fuseblk (rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096,uhelper=udisks2)


=================== ls:
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sda1 sda2 sda3 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sdb1 size slaves stat subsystem trace uevent
/sys/block/sdc (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sdc1 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered):  autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency cuse disk dri dvd dvdrw ecryptfs fb0 fd full fuse hidraw0 hidraw1 hidraw2 hpet hugepages hwrng i2c-0 i2c-1 i2c-10 i2c-11 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 i2c-7 i2c-8 i2c-9 initctl input kfd kmsg lightnvm log mapper mcelog media0 mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sdb sdb1 sdc sdc1 sg0 sg1 sg2 sg3 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom usb userio v4l vfio vga_arbiter vhci vhost-net video0 zero
ls /dev/mapper:  control
ls: impossible d'accéder à '': Aucun fichier ou dossier de ce type

=================== hexdump -n512 -C /dev/sda1
00000000  eb 58 90 6d 6b 66 73 2e  66 61 74 00 02 08 20 00  |.X.mkfs.fat... .|
00000010  02 00 00 00 00 f8 00 00  3f 00 ff 00 00 08 00 00  |........?.......|
00000020  00 00 10 00 fe 03 00 00  00 00 00 00 02 00 00 00  |................|
00000030  01 00 06 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000040  80 01 29 a3 36 62 2c 4e  4f 20 4e 41 4d 45 20 20  |..).6b,NO NAME  |
00000050  20 20 46 41 54 33 32 20  20 20 0e 1f be 77 7c ac  |  FAT32   ...w|.|
00000060  22 c0 74 0b 56 b4 0e bb  07 00 cd 10 5e eb f0 32  |".t.V.......^..2|
00000070  e4 cd 16 cd 19 eb fe 54  68 69 73 20 69 73 20 6e  |.......This is n|
00000080  6f 74 20 61 20 62 6f 6f  74 61 62 6c 65 20 64 69  |ot a bootable di|
00000090  73 6b 2e 20 20 50 6c 65  61 73 65 20 69 6e 73 65  |sk.  Please inse|
000000a0  72 74 20 61 20 62 6f 6f  74 61 62 6c 65 20 66 6c  |rt a bootable fl|
000000b0  6f 70 70 79 20 61 6e 64  0d 0a 70 72 65 73 73 20  |oppy and..press |
000000c0  61 6e 79 20 6b 65 79 20  74 6f 20 74 72 79 20 61  |any key to try a|
000000d0  67 61 69 6e 20 2e 2e 2e  20 0d 0a 00 00 00 00 00  |gain ... .......|
000000e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200

=================== hexdump -n512 -C /dev/sdb1
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 3f 00 00 00  |........?...?...|
00000020  00 00 00 00 80 00 80 00  81 dd 49 17 00 00 00 00  |..........I.....|
00000030  00 00 0c 00 00 00 00 00  d8 9d 74 01 00 00 00 00  |..........t.....|
00000040  f6 00 00 00 01 00 00 00  0a 58 f4 38 7d f4 38 5c  |.........X.8}.8|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb b8 c0 07  |.....3.....|....|
00000060  8e d8 e8 16 00 b8 00 0d  8e c0 33 db c6 06 0e 00  |..........3.....|
00000070  10 e8 53 00 68 00 0d 68  6a 02 cb 8a 16 24 00 b4  |..S.h..hj....$..|
00000080  08 cd 13 73 05 b9 ff ff  8a f1 66 0f b6 c6 40 66  |...s......f...@f|
00000090  0f b6 d1 80 e2 3f f7 e2  86 cd c0 ed 06 41 66 0f  |.....?.......Af.|
000000a0  b7 c9 66 f7 e1 66 a3 20  00 c3 b4 41 bb aa 55 8a  |..f..f. ...A..U.|
000000b0  16 24 00 cd 13 72 0f 81  fb 55 aa 75 09 f6 c1 01  |.$...r...U.u....|
000000c0  74 04 fe 06 14 00 c3 66  60 1e 06 66 a1 10 00 66  |t......f`..f...f|
000000d0  03 06 1c 00 66 3b 06 20  00 0f 82 3a 00 1e 66 6a  |....f;. ...:..fj|
000000e0  00 66 50 06 53 66 68 10  00 01 00 80 3e 14 00 00  |.fP.Sfh.....>...|
000000f0  0f 85 0c 00 e8 b3 ff 80  3e 14 00 00 0f 84 61 00  |........>.....a.|
00000100  b4 42 8a 16 24 00 16 1f  8b f4 cd 13 66 58 5b 07  |.B..$.......fX[.|
00000110  66 58 66 58 1f eb 2d 66  33 d2 66 0f b7 0e 18 00  |fXfX..-f3.f.....|
00000120  66 f7 f1 fe c2 8a ca 66  8b d0 66 c1 ea 10 f7 36  |f......f..f....6|
00000130  1a 00 86 d6 8a 16 24 00  8a e8 c0 e4 06 0a cc b8  |......$.........|
00000140  01 02 cd 13 0f 82 19 00  8c c0 05 20 00 8e c0 66  |........... ...f|
00000150  ff 06 10 00 ff 0e 0e 00  0f 85 6f ff 07 1f 66 61  |..........o...fa|
00000160  c3 a0 f8 01 e8 09 00 a0  fb 01 e8 03 00 fb eb fe  |................|
00000170  b4 01 8b f0 ac 3c 00 74  09 b4 0e bb 07 00 cd 10  |.....<.t........|
00000180  eb f2 c3 0d 0a 45 72 72  2e 20 6c 65 63 74 75 72  |.....Err. lectur|
00000190  65 20 64 69 73 71 75 65  00 0d 0a 4e 54 4c 44 52  |e disque...NTLDR|
000001a0  20 6d 61 6e 71 75 65 00  0d 0a 4e 54 4c 44 52 20  | manque...NTLDR |
000001b0  65 73 74 20 63 6f 6d 70  72 65 73 73 82 00 0d 0a  |est compress....|
000001c0  45 6e 74 72 65 7a 20 43  74 72 6c 2b 41 6c 74 2b  |Entrez Ctrl+Alt+|
000001d0  53 75 70 70 72 20 70 6f  75 72 20 72 65 64 82 6d  |Suppr pour red.m|
000001e0  61 72 72 65 72 0d 0a 00  0d 0a 00 00 00 00 00 00  |arrer...........|
000001f0  00 00 00 00 00 00 00 00  83 99 a8 be 00 00 55 aa  |..............U.|
00000200

=================== hexdump -n512 -C /dev/sdc1
00000000  eb 58 90 6d 6b 64 6f 73  66 73 00 00 02 08 20 00  |.X.mkdosfs.... .|
00000010  02 00 00 00 00 f8 00 00  3e 00 fe 00 00 00 00 00  |........>.......|
00000020  e0 ff f5 00 68 3d 00 00  00 00 00 00 02 00 00 00  |....h=..........|
00000030  01 00 06 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000040  00 01 29 c5 58 67 2b 74  65 6c 65 38 47 6f 20 20  |..).Xg+tele8Go  |
00000050  20 20 46 41 54 33 32 20  20 20 0e 1f be 77 7c ac  |  FAT32   ...w|.|
00000060  22 c0 74 0b 56 b4 0e bb  07 00 cd 10 5e eb f0 32  |".t.V.......^..2|
00000070  e4 cd 16 cd 19 eb fe 54  68 69 73 20 69 73 20 6e  |.......This is n|
00000080  6f 74 20 61 20 62 6f 6f  74 61 62 6c 65 20 64 69  |ot a bootable di|
00000090  73 6b 2e 20 20 50 6c 65  61 73 65 20 69 6e 73 65  |sk.  Please inse|
000000a0  72 74 20 61 20 62 6f 6f  74 61 62 6c 65 20 66 6c  |rt a bootable fl|
000000b0  6f 70 70 79 20 61 6e 64  0d 0a 70 72 65 73 73 20  |oppy and..press |
000000c0  61 6e 79 20 6b 65 79 20  74 6f 20 74 72 79 20 61  |any key to try a|
000000d0  67 61 69 6e 20 2e 2e 2e  20 0d 0a 00 00 00 00 00  |gain ... .......|
000000e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200

=================== df -Th:

Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  1.8G     0  1.8G   0% /dev
tmpfs          tmpfs     354M  6.1M  348M   2% /run
/dev/sda2      ext4      913G   77G  790G   9% /
tmpfs          tmpfs     1.8G  184K  1.8G   1% /dev/shm
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
tmpfs          tmpfs     1.8G     0  1.8G   0% /sys/fs/cgroup
/dev/sda1      vfat      511M  7.3M  504M   2% /boot/efi
cgmfs          tmpfs     100K     0  100K   0% /run/cgmanager/fs
tmpfs          tmpfs     354M   60K  354M   1% /run/user/1000
/dev/sdc1      vfat      7.7G   26M  7.7G   1% /media/neumann/tele8Go
/dev/sdb1      fuseblk   187G   43G  144G  23% /media/neumann/TREKSTOR2

=================== fdisk -l:
Disk /dev/ram0: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram1: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram2: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram3: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram4: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram5: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram6: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram7: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram8: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram9: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram10: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram11: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram12: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram13: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram14: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram15: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: C8300E82-71A3-4A21-A7E2-F6E5C70F5D9C

Device          Start        End    Sectors   Size Type
/dev/sda1        2048    1050623    1048576   512M EFI System
/dev/sda2     1050624 1946009599 1944958976 927.4G Linux filesystem
/dev/sda3  1946009600 1953523711    7514112   3.6G Linux swap




Disk /dev/sdb: 186.3 GiB, 200049647616 bytes, 390721968 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x01f7d1ce

Device     Boot Start       End   Sectors   Size Id Type
/dev/sdb1          63 390716864 390716802 186.3G  7 HPFS/NTFS/exFAT


Disk /dev/sdc: 7.7 GiB, 8254390272 bytes, 16121856 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x3604d483

Device     Boot Start      End  Sectors  Size Id Type
/dev/sdc1          32 16121855 16121824  7.7G  c W95 FAT32 (LBA)




=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub-efi-amd64-signed of sda2, using the following options:        sda1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s    use-standard-efi-file rename-ms-efi


=================== Final advice in case of suggested repair
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le disque sda (1000GB) !

Les fichiers de démarrage de [L'OS actuellement utilisé - Ubuntu 16.04.1 LTS] sont loin du début du disque. Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer après avoir créé une partition /boot (EXT4, >200MB, en début de disque). Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition via l'option [Partition /boot séparée :] de [Boot-Repair]. (http://doc.ubuntu-fr.org/tutoriel/partition_boot)


=================== User settings
The settings chosen by the user will not act on the boot.




paste.ubuntu.com ko (), using paste.debian
paste.debian.net ko (), using paste2

Comme l'a justement remarqué moko138, ce Boot-Info a été fait depuis une session du Ubuntu installé alors que je t'avais demandé de le faire depuis une session Live (ordi démarré sur une LiveUSB Ubuntu 16.04.1 64 bits). Peux-tu expliquer pourquoi tu as procédé comme ça ?
A part ça, moi je ne sais pas voir dans ce Boot-Info une anomalie qui pourrait être la cause du temps de démarrage complètement fou (45 minutes) que tu as indiqué dans le post #1.

Dernière modification par malbo (Le 07/09/2016, à 09:22)

Hors ligne

#13 Le 09/09/2016, à 06:55

patmeu

Re : démarrage ubuntu 16.04 [résolu]

Bonjour

J'ai effectivement fait une clé avec ubuntu16.04.1
J'ai fait le bootinfo sur la machine car c'est sur la machine que cela ne marche pas.
De plus la machine ne boot pas ni sur une clé ni sur un CD?
En fait le temps de démarrage est très variable de 5 à 45 mn selon que la machine soit "nue" ou bien avec hub , disque dur externe, mini plug bluetooth  et clés USB...
Malheureusement mes connaissance informatiques sont limitées et je ne sais pas forcer la machine à démarrer sur le disque le CD ou la clé.
Cordialement.
Patrice

PS comment indiqué qu’un problème est résolu?

Hors ligne

#14 Le 09/09/2016, à 07:25

malbo

Re : démarrage ubuntu 16.04 [résolu]

patmeu a écrit :

De plus la machine ne boot pas ni sur une clé ni sur un CD?

On ne peut pas vivre dans ces conditions. Pour réparer un Ubuntu malade, il faut impérativement pouvoir démarrer sur un support live (LiveDVD ou LiveUSB). Dans ce but, je te recommande de désactiver "Secure boot" parce qu'on peut voir dans cet extrait de ton Boot-Info qu'il est activé (SecureBoot enabled) :

=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.
SecureBoot enabled.

Cette vidéo montre comment désactiver Secure Boot sur ton modèle : https://www.youtube.com/watch?v=Yrhpkd9IJqY (par contre, on y voit que le paramètre "Legacy Support" est passé de "Disable" à "Enable" et ça je ne te conseille pas de le faire. Laisse "Legacy Support" sur "Disable").
Je crois que cette page est encore mieux que la vidéo : http://h30478.www3.hp.com/t5/Ordinateur … 32896#M827

Complètement à part de ma remarque précédente sur "Secure Boot", je te prie de faire la manip suivante : démarre l'ordi en même temps que tu presses la touche F9 et maintiens-la pressée jusqu'à l'apparition du Boot Menu. Dans ce Boot Menu, tu devrais voir une entrée nommée "ubuntu" et si tu cliques dessus, ça devrait démarrer ton Ubuntu installé. Si ça fonctionne, dis-nous en combien de temps ça te permet d'arriver sur le bureau d'Ubuntu (depuis le démarrage de l'ordi).

Dernière modification par malbo (Le 09/09/2016, à 07:58)

Hors ligne

#15 Le 09/09/2016, à 11:41

Bougron

Re : démarrage ubuntu 16.04 [résolu]

patmeu a écrit :

Bonjour

J'ai effectivement fait une clé avec ubuntu16.04.1
J'ai fait le bootinfo sur la machine car c'est sur la machine que cela ne marche pas.
De plus la machine ne boot pas ni sur une clé ni sur un CD?
En fait le temps de démarrage est très variable de 5 à 45 mn selon que la machine soit "nue" ou bien avec hub , disque dur externe, mini plug bluetooth  et clés USB...
Malheureusement mes connaissance informatiques sont limitées et je ne sais pas forcer la machine à démarrer sur le disque le CD ou la clé.
Cordialement.
Patrice

Bonjour
Je te rappelle ma demande du post N°7

Pour analyser un démarrage lent qui se fait correctement, donnes le retour de

dmesg > TRACE.txt
gedit   TRACE.txt

et

systemd-analyze blame

N'oublies pas de mettre en forme en utilisant le 11eme icône <> de cette grille de saisie après avoir sélectionné ce que tu viens de copier

Dernière modification par Bougron (Le 09/09/2016, à 11:43)

Hors ligne

#16 Le 10/09/2016, à 09:35

patmeu

Re : démarrage ubuntu 16.04 [résolu]

J'ai vérifié les temps de démarrage en chronométrant avec mon téléphone.
Démarrage sur ubuntu avec tous les périphérique supérieur à 30', j'ai renoncé à attendre plus.
démarrage sur ubuntu sans periphrique juste clavier et souris 13'
démarrage avec généric 3.13 1'

Hors ligne

#17 Le 10/09/2016, à 09:55

moko138

Re : démarrage ubuntu 16.04 [résolu]

/!\  Merci de cliquer sur "Modifier" sous ton #7 et de mettre chacun de tes deux retours de commande entre balises-code (la 2ème icône à droite de la palette, dans la barre de mise en forme).


%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel :  À la découverte de dcraw

Hors ligne

#18 Le 10/09/2016, à 16:09

patmeu

Re : démarrage ubuntu 16.04 [résolu]

Je ne sais pas si j'ai bien réalisé la modification de mon post #7
En tout cas voila l'URL du boot-info
http://paste2.org/WapX3hgm
Désolé de ne pas être très bien formé.
Patrice

Hors ligne

#19 Le 10/09/2016, à 16:19

cqfd93

Re : démarrage ubuntu 16.04 [résolu]

Modération

Bonjour,

Merci d'ajouter les balises code à tes message 17 et 21. (messages supprimés par leur auteur)

Utilisation des balises code - Voilà la marche à suivre :

  1. Ouvre le terminal avec ctrl-alt-t

  2. Sélectionne la commande voulue avec un triple clic (ça sélectionne toute la ligne, même la fin si on ne la voit pas)

  3. Colle-la dans le terminal avec un clic molette, valide avec Entrée

  4. Sélectionne et copie tout ce que te dit le terminal depuis la commande jusqu'à le dernière ligne incluse

  5. Clique sur le <> de l'éditeur de message
    1471986854.png

  6. Colle là où se trouve le curseur (entre le ] et le [)

  7. Refais toutes les étapes depuis la 2 pour les autres commandes.

Ajout des balises à un texte existant :

  • sélectionner le texte

  • cliquer sur le <> de l'éditeur de message
    1471986854.png

Dernière modification par cqfd93 (Le 10/09/2016, à 18:53)


cqfd93

Hors ligne

#20 Le 10/09/2016, à 16:23

Bougron

Re : démarrage ubuntu 16.04 [résolu]

patmeu a écrit :

J'ai vérifié les temps de démarrage en chronométrant avec mon téléphone.
Démarrage sur ubuntu avec tous les périphérique supérieur à 30', j'ai renoncé à attendre plus.
démarrage sur ubuntu sans periphrique juste clavier et souris 13'
démarrage avec généric 3.13 1'

Je ne comprends pas que le démarrage dure 13 minutes alors que la trace indique moins de 57 secondes.
[   56.931220] FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.

Hors ligne

#21 Le 10/09/2016, à 18:26

patmeu

Re : démarrage ubuntu 16.04 [résolu]

Voilà les edition de dmesg et gedit

neumann@neumann-20-b315ef:~$ dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.0-36-generic (buildd@lcy01-01) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.2) ) #55-Ubuntu SMP Thu Aug 11 18:01:55 UTC 2016 (Ubuntu 4.4.0-36.55-generic 4.4.16)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-36-generic.efi.signed root=UUID=7f6cc3bb-aa02-45f3-a475-e5d0691be909 ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] tseg: 00a7000000
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000a6139fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000a613a000-0x00000000a62c0fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000a62c1000-0x00000000a62d7fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000a62d8000-0x00000000a639ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000a63a0000-0x00000000a6851fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000a6852000-0x00000000a688dfff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000a688e000-0x00000000a688efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000a688f000-0x00000000a6895fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000a6896000-0x00000000a6cf0fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000a6cf1000-0x00000000a6ff1fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000a6ff2000-0x00000000a6ffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000013effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.31 by American Megatrends
[    0.000000] efi:  ACPI=0xa62c5000  ACPI 2.0=0xa62c5000  SMBIOS=0xf04c0  MPS=0xfd6a0 
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Hewlett-Packard 20-b315ef/2B02, BIOS 80.05 07/23/2013
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x13f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF write-through
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FE0000000 write-back
[    0.000000]   2 base 0A0000000 mask FFC000000 write-back
[    0.000000]   3 base 0A4000000 mask FFE000000 write-back
[    0.000000]   4 base 0A6000000 mask FFF000000 write-back
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 000000013f000000 aka 5104M
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: update [mem 0xa7000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xa7000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fd940-0x000fd94f] mapped at [ffff8800000fd940]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x02200000, 0x02200fff] PGTABLE
[    0.000000] BRK [0x02201000, 0x02201fff] PGTABLE
[    0.000000] BRK [0x02202000, 0x02202fff] PGTABLE
[    0.000000] BRK [0x02203000, 0x02203fff] PGTABLE
[    0.000000] BRK [0x02204000, 0x02204fff] PGTABLE
[    0.000000] BRK [0x02205000, 0x02205fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x33af8000-0x35d73fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000A62C5000 000024 (v02 HPQOEM)
[    0.000000] ACPI: XSDT 0x00000000A62C5080 00007C (v01 HPQOEM SLIC-CPC 01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000A62D14C0 00010C (v05 HPQOEM SLIC-CPC 01072009 AMI  00010013)
[    0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20150930/tbfadt-654)
[    0.000000] ACPI: DSDT 0x00000000A62C5188 00C331 (v02 HPQOEM SLIC-CPC 00000000 INTL 20051117)
[    0.000000] ACPI: FACS 0x00000000A6395080 000040
[    0.000000] ACPI: APIC 0x00000000A62D15D0 000062 (v03 HPQOEM SLIC-CPC 01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000A62D1638 000044 (v01 HPQOEM SLIC-CPC 01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x00000000A62D1680 00003C (v01 HPQOEM SLIC-CPC 01072009 MSFT 00010013)
[    0.000000] ACPI: MSDM 0x00000000A62D16C0 000055 (v03 HPQOEM SLIC-CPC 01072009 AMI  00010013)
[    0.000000] ACPI: HPET 0x00000000A62D1718 000038 (v01 HPQOEM SLIC-CPC 01072009 AMI  00000005)
[    0.000000] ACPI: VFCT 0x00000000A62D1750 004484 (v01 HPQOEM SLIC-CPC 00000001 AMD  31504F47)
[    0.000000] ACPI: BGRT 0x00000000A62D5BD8 000038 (v00 HPQOEM SLIC-CPC 01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000A62D5C10 0003DE (v01 HPQOEM SLIC-CPC 00000001 AMD  00000001)
[    0.000000] ACPI: SSDT 0x00000000A62D5FF0 0016E4 (v02 HPQOEM SLIC-CPC 00000001 MSFT 04000000)
[    0.000000] ACPI: DBGP 0x00000000A62D76D8 000034 (v01 HPQOEM SLIC-CPC 01072009 AMI  00010013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000013effffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x13eff7000-0x13effbfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000013effffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009ffff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000a6139fff]
[    0.000000]   node   0: [mem 0x00000000a688e000-0x00000000a688efff]
[    0.000000]   node   0: [mem 0x00000000a6896000-0x00000000a6cf0fff]
[    0.000000]   node   0: [mem 0x00000000a6ff2000-0x00000000a6ffffff]
[    0.000000]   node   0: [mem 0x0000000100001000-0x000000013effffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013effffff]
[    0.000000] On node 0 totalpages: 939330
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 25 pages reserved
[    0.000000]   DMA zone: 3999 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 10583 pages used for memmap
[    0.000000]   DMA32 zone: 677284 pages, LIFO batch:31
[    0.000000]   Normal zone: 4032 pages used for memmap
[    0.000000]   Normal zone: 258047 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 3, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xa613a000-0xa62c0fff]
[    0.000000] PM: Registered nosave memory: [mem 0xa62c1000-0xa62d7fff]
[    0.000000] PM: Registered nosave memory: [mem 0xa62d8000-0xa639ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xa63a0000-0xa6851fff]
[    0.000000] PM: Registered nosave memory: [mem 0xa6852000-0xa688dfff]
[    0.000000] PM: Registered nosave memory: [mem 0xa688f000-0xa6895fff]
[    0.000000] PM: Registered nosave memory: [mem 0xa6cf1000-0xa6ff1fff]
[    0.000000] PM: Registered nosave memory: [mem 0xa7000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
[    0.000000] e820: [mem 0xa7000000-0xfebfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 33 pages/cpu @ffff88013ec00000 s98008 r8192 d28968 u1048576
[    0.000000] pcpu-alloc: s98008 r8192 d28968 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 924626
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-36-generic.efi.signed root=UUID=7f6cc3bb-aa02-45f3-a475-e5d0691be909 ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3395652K/3757320K available (8394K kernel code, 1282K rwdata, 3944K rodata, 1480K init, 1292K bss, 361668K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2
[    0.000000] NR_IRQS:16640 nr_irqs:440 16
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1477.400 MHz processor
[    0.000064] Calibrating delay loop (skipped), value calculated using timer frequency.. 2954.80 BogoMIPS (lpj=5909600)
[    0.000073] pid_max: default: 32768 minimum: 301
[    0.000093] ACPI: Core revision 20150930
[    0.017470] ACPI: 3 ACPI AML tables successfully acquired and loaded
[    0.021652] Security Framework initialized
[    0.021662] Yama: becoming mindful.
[    0.021702] AppArmor: AppArmor initialized
[    0.022375] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.025608] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.027122] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.027141] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.027732] Initializing cgroup subsys io
[    0.027750] Initializing cgroup subsys memory
[    0.027771] Initializing cgroup subsys devices
[    0.027780] Initializing cgroup subsys freezer
[    0.027788] Initializing cgroup subsys net_cls
[    0.027795] Initializing cgroup subsys perf_event
[    0.027802] Initializing cgroup subsys net_prio
[    0.027809] Initializing cgroup subsys hugetlb
[    0.027819] Initializing cgroup subsys pids
[    0.027873] CPU: Physical Processor ID: 0
[    0.027876] CPU: Processor Core ID: 0
[    0.027880] mce: CPU supports 6 MCE banks
[    0.027902] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[    0.027906] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
[    0.028794] Freeing SMP alternatives memory: 28K (ffffffff820b4000 - ffffffff820bb000)
[    0.069070] ftrace: allocating 31996 entries in 125 pages
[    0.105044] smpboot: Max logical packages: 1
[    0.105056] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.105521] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.252584] smpboot: CPU0: AMD E1-1500 APU with Radeon(tm) HD Graphics (family: 0x14, model: 0x2, stepping: 0x0)
[    0.252629] Performance Events: AMD PMU driver.
[    0.252640] ... version:                0
[    0.252643] ... bit width:              48
[    0.252646] ... generic registers:      4
[    0.252649] ... value mask:             0000ffffffffffff
[    0.252652] ... max period:             00007fffffffffff
[    0.252654] ... fixed-purpose events:   0
[    0.252657] ... event mask:             000000000000000f
[    0.254372] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.254620] x86: Booting SMP configuration:
[    0.254626] .... node  #0, CPUs:      #1
[    0.256960] x86: Booted up 1 node, 2 CPUs
[    0.256965] smpboot: Total of 2 processors activated (5909.60 BogoMIPS)
[    0.258117] devtmpfs: initialized
[    0.265618] evm: security.selinux
[    0.265622] evm: security.SMACK64
[    0.265625] evm: security.SMACK64EXEC
[    0.265627] evm: security.SMACK64TRANSMUTE
[    0.265630] evm: security.SMACK64MMAP
[    0.265632] evm: security.ima
[    0.265634] evm: security.capability
[    0.265924] PM: Registering ACPI NVS region [mem 0xa62d8000-0xa639ffff] (819200 bytes)
[    0.265973] PM: Registering ACPI NVS region [mem 0xa688f000-0xa6895fff] (28672 bytes)
[    0.266175] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.266473] pinctrl core: initialized pinctrl subsystem
[    0.266788] RTC time:  7:53:23, date: 09/10/16
[    0.267086] NET: Registered protocol family 16
[    0.277150] cpuidle: using governor ladder
[    0.289200] cpuidle: using governor menu
[    0.289236] PCCT header not found.
[    0.289649] ACPI: bus type PCI registered
[    0.289655] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.289890] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.289897] PCI: not using MMCONFIG
[    0.289901] PCI: Using configuration type 1 for base access
[    0.289904] PCI: Using configuration type 1 for extended access
[    0.306765] ACPI: Added _OSI(Module Device)
[    0.306776] ACPI: Added _OSI(Processor Device)
[    0.306779] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.306783] ACPI: Added _OSI(Processor Aggregator Device)
[    0.311209] ACPI: Executed 1 blocks of module-level executable AML code
[    0.313287] ACPI Error: Needed [Integer/String/Buffer], found [Region] ffff88013a8add80 (20150930/exresop-424)
[    0.313300] ACPI Exception: AE_AML_OPERAND_TYPE, Could not execute arguments for [SMI0] (Region) (20150930/nsinit-355)
[    0.317608] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.318468] ACPI: Interpreter enabled
[    0.318487] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
[    0.318499] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
[    0.318535] ACPI: (supports S0 S3 S4 S5)
[    0.318539] ACPI: Using IOAPIC for interrupt routing
[    0.318958] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.319069] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.319105] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.327257] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    0.334075] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.334094] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.334539] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug]
[    0.334950] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]
[    0.335760] PCI host bridge to bus 0000:00
[    0.335767] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.335773] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.335778] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    0.335783] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.335788] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.335793] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.335797] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window]
[    0.335802] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.335823] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000
[    0.336090] pci 0000:00:01.0: [1002:9809] type 00 class 0x030000
[    0.336135] pci 0000:00:01.0: reg 0x10: [mem 0xc0000000-0xcfffffff pref]
[    0.336151] pci 0000:00:01.0: reg 0x14: [io  0xf000-0xf0ff]
[    0.336166] pci 0000:00:01.0: reg 0x18: [mem 0xfeb00000-0xfeb3ffff]
[    0.336256] pci 0000:00:01.0: supports D1 D2
[    0.336475] pci 0000:00:04.0: [1022:1512] type 01 class 0x060400
[    0.336628] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[    0.336903] pci 0000:00:10.0: [1022:7812] type 00 class 0x0c0330
[    0.336974] pci 0000:00:10.0: reg 0x10: [mem 0xfeb44000-0xfeb45fff 64bit]
[    0.337122] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[    0.337244] pci 0000:00:10.0: System wakeup disabled by ACPI
[    0.337361] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
[    0.337411] pci 0000:00:11.0: reg 0x10: [io  0xf140-0xf147]
[    0.337429] pci 0000:00:11.0: reg 0x14: [io  0xf130-0xf133]
[    0.337448] pci 0000:00:11.0: reg 0x18: [io  0xf120-0xf127]
[    0.337466] pci 0000:00:11.0: reg 0x1c: [io  0xf110-0xf113]
[    0.337484] pci 0000:00:11.0: reg 0x20: [io  0xf100-0xf10f]
[    0.337503] pci 0000:00:11.0: reg 0x24: [mem 0xfeb4b000-0xfeb4b7ff]
[    0.337753] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[    0.337784] pci 0000:00:12.0: reg 0x10: [mem 0xfeb4a000-0xfeb4afff]
[    0.337982] pci 0000:00:12.0: System wakeup disabled by ACPI
[    0.338149] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[    0.338196] pci 0000:00:12.2: reg 0x10: [mem 0xfeb49000-0xfeb490ff]
[    0.338328] pci 0000:00:12.2: supports D1 D2
[    0.338333] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.338437] pci 0000:00:12.2: System wakeup disabled by ACPI
[    0.338575] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[    0.338605] pci 0000:00:13.0: reg 0x10: [mem 0xfeb48000-0xfeb48fff]
[    0.338807] pci 0000:00:13.0: System wakeup disabled by ACPI
[    0.338943] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[    0.338991] pci 0000:00:13.2: reg 0x10: [mem 0xfeb47000-0xfeb470ff]
[    0.339122] pci 0000:00:13.2: supports D1 D2
[    0.339127] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.339232] pci 0000:00:13.2: System wakeup disabled by ACPI
[    0.339351] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[    0.339670] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[    0.339720] pci 0000:00:14.2: reg 0x10: [mem 0xfeb40000-0xfeb43fff 64bit]
[    0.339833] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.339936] pci 0000:00:14.2: System wakeup disabled by ACPI
[    0.340065] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[    0.340363] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
[    0.340530] pci 0000:00:14.4: System wakeup disabled by ACPI
[    0.340668] pci 0000:00:14.5: [1022:7809] type 00 class 0x0c0310
[    0.340699] pci 0000:00:14.5: reg 0x10: [mem 0xfeb46000-0xfeb46fff]
[    0.340897] pci 0000:00:14.5: System wakeup disabled by ACPI
[    0.341040] pci 0000:00:15.0: [1022:43a0] type 01 class 0x060400
[    0.341182] pci 0000:00:15.0: supports D1 D2
[    0.341294] pci 0000:00:15.0: System wakeup disabled by ACPI
[    0.341393] pci 0000:00:15.1: [1022:43a1] type 01 class 0x060400
[    0.341534] pci 0000:00:15.1: supports D1 D2
[    0.341646] pci 0000:00:15.1: System wakeup disabled by ACPI
[    0.341745] pci 0000:00:15.2: [1022:43a2] type 01 class 0x060400
[    0.341886] pci 0000:00:15.2: supports D1 D2
[    0.341994] pci 0000:00:15.2: System wakeup disabled by ACPI
[    0.342167] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
[    0.342397] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
[    0.342615] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
[    0.342836] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
[    0.343073] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
[    0.343290] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
[    0.343508] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
[    0.343724] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
[    0.344126] pci 0000:00:04.0: PCI bridge to [bus 01]
[    0.344350] pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
[    0.344370] pci 0000:00:14.4:   bridge window [io  0x0000-0x03af window] (subtractive decode)
[    0.344375] pci 0000:00:14.4:   bridge window [io  0x03e0-0x0cf7 window] (subtractive decode)
[    0.344379] pci 0000:00:14.4:   bridge window [io  0x03b0-0x03df window] (subtractive decode)
[    0.344384] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.344389] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.344398] pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[    0.344403] pci 0000:00:14.4:   bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode)
[    0.344622] pci 0000:03:00.0: [10ec:8136] type 00 class 0x020000
[    0.344691] pci 0000:03:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.344741] pci 0000:03:00.0: reg 0x18: [mem 0xd0004000-0xd0004fff 64bit pref]
[    0.344774] pci 0000:03:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]
[    0.344891] pci 0000:03:00.0: supports D1 D2
[    0.344896] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.352841] pci 0000:00:15.0: PCI bridge to [bus 03]
[    0.352863] pci 0000:00:15.0:   bridge window [io  0xe000-0xefff]
[    0.352881] pci 0000:00:15.0:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.353138] pci 0000:04:00.0: [168c:0032] type 00 class 0x028000
[    0.353214] pci 0000:04:00.0: reg 0x10: [mem 0xfea00000-0xfea7ffff 64bit]
[    0.353284] pci 0000:04:00.0: reg 0x30: [mem 0xfea80000-0xfea8ffff pref]
[    0.353401] pci 0000:04:00.0: supports D1 D2
[    0.353406] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.360829] pci 0000:00:15.1: PCI bridge to [bus 04]
[    0.360859] pci 0000:00:15.1:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.361101] pci 0000:05:00.0: [10ec:5209] type 00 class 0xff0000
[    0.361172] pci 0000:05:00.0: reg 0x10: [mem 0xfe901000-0xfe901fff]
[    0.361382] pci 0000:05:00.0: supports D1 D2
[    0.361387] pci 0000:05:00.0: PME# supported from D1 D2 D3hot
[    0.368840] pci 0000:00:15.2: PCI bridge to [bus 05]
[    0.368866] pci 0000:00:15.2:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.369912] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
[    0.370156] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[    0.370398] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[    0.370638] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[    0.370813] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[    0.371005] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[    0.371197] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[    0.371344] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[    0.371721] ACPI: Enabled 1 GPEs in block 00 to 1F
[    0.372220] vgaarb: setting as boot device: PCI:0000:00:01.0
[    0.372231] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[    0.372246] vgaarb: loaded
[    0.372250] vgaarb: bridge control possible 0000:00:01.0
[    0.373007] SCSI subsystem initialized
[    0.373246] libata version 3.00 loaded.
[    0.373329] ACPI: bus type USB registered
[    0.373390] usbcore: registered new interface driver usbfs
[    0.373415] usbcore: registered new interface driver hub
[    0.373453] usbcore: registered new device driver usb
[    0.374028] PCI: Using ACPI for IRQ routing
[    0.389007] PCI: pci_cache_line_size set to 64 bytes
[    0.389160] e820: reserve RAM buffer [mem 0xa613a000-0xa7ffffff]
[    0.389165] e820: reserve RAM buffer [mem 0xa688f000-0xa7ffffff]
[    0.389169] e820: reserve RAM buffer [mem 0xa6cf1000-0xa7ffffff]
[    0.389172] e820: reserve RAM buffer [mem 0xa7000000-0xa7ffffff]
[    0.389176] e820: reserve RAM buffer [mem 0x13f000000-0x13fffffff]
[    0.389481] NetLabel: Initializing
[    0.389485] NetLabel:  domain hash size = 128
[    0.389488] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.389522] NetLabel:  unlabeled traffic allowed by default
[    0.389991] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.390005] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.392043] amd_nb: Cannot enumerate AMD northbridges
[    0.392125] clocksource: Switched to clocksource hpet
[    0.409746] AppArmor: AppArmor Filesystem Enabled
[    0.409923] pnp: PnP ACPI init
[    0.410276] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.410289] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.411006] system 00:01: [io  0x04d0-0x04d1] has been reserved
[    0.411012] system 00:01: [io  0x040b] has been reserved
[    0.411017] system 00:01: [io  0x04d6] has been reserved
[    0.411022] system 00:01: [io  0x0c00-0x0c01] has been reserved
[    0.411027] system 00:01: [io  0x0c14] has been reserved
[    0.411032] system 00:01: [io  0x0c50-0x0c51] has been reserved
[    0.411037] system 00:01: [io  0x0c52] has been reserved
[    0.411042] system 00:01: [io  0x0c6c] has been reserved
[    0.411046] system 00:01: [io  0x0c6f] has been reserved
[    0.411051] system 00:01: [io  0x0cd0-0x0cd1] has been reserved
[    0.411056] system 00:01: [io  0x0cd2-0x0cd3] has been reserved
[    0.411061] system 00:01: [io  0x0cd4-0x0cd5] has been reserved
[    0.411066] system 00:01: [io  0x0cd6-0x0cd7] has been reserved
[    0.411070] system 00:01: [io  0x0cd8-0x0cdf] has been reserved
[    0.411076] system 00:01: [io  0x0800-0x089f] could not be reserved
[    0.411081] system 00:01: [io  0x0b20-0x0b3f] has been reserved
[    0.411086] system 00:01: [io  0x0900-0x090f] has been reserved
[    0.411090] system 00:01: [io  0x0910-0x091f] has been reserved
[    0.411095] system 00:01: [io  0xfe00-0xfefe] has been reserved
[    0.411102] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.411108] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.411113] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
[    0.411118] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
[    0.411124] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.411129] system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved
[    0.411135] system 00:01: [mem 0xff000000-0xffffffff] has been reserved
[    0.411143] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.411380] system 00:02: [io  0x0280-0x028f] has been reserved
[    0.411388] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.411474] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.411621] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.411630] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.411735] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.412256] system 00:06: [mem 0xa8000000-0xbfffffff] has been reserved
[    0.412265] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.412621] pnp: PnP ACPI: found 7 devices
[    0.427324] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.427381] pci 0000:00:04.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[    0.427391] pci 0000:00:04.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[    0.427398] pci 0000:00:04.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[    0.427498] pci 0000:00:04.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.427504] pci 0000:00:04.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.427510] pci 0000:00:04.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.427516] pci 0000:00:04.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.427522] pci 0000:00:04.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.427528] pci 0000:00:04.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.427542] pci 0000:00:04.0: BAR 14: assigned [mem 0xd0100000-0xd02fffff]
[    0.427556] pci 0000:00:04.0: BAR 15: assigned [mem 0xd0300000-0xd04fffff 64bit pref]
[    0.427565] pci 0000:00:04.0: BAR 13: assigned [io  0x1000-0x1fff]
[    0.427573] pci 0000:00:04.0: PCI bridge to [bus 01]
[    0.427580] pci 0000:00:04.0:   bridge window [io  0x1000-0x1fff]
[    0.427589] pci 0000:00:04.0:   bridge window [mem 0xd0100000-0xd02fffff]
[    0.427598] pci 0000:00:04.0:   bridge window [mem 0xd0300000-0xd04fffff 64bit pref]
[    0.427611] pci 0000:00:14.4: PCI bridge to [bus 02]
[    0.427671] pci 0000:00:15.0: PCI bridge to [bus 03]
[    0.427677] pci 0000:00:15.0:   bridge window [io  0xe000-0xefff]
[    0.427691] pci 0000:00:15.0:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.427704] pci 0000:00:15.1: PCI bridge to [bus 04]
[    0.427714] pci 0000:00:15.1:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.427731] pci 0000:00:15.2: PCI bridge to [bus 05]
[    0.427741] pci 0000:00:15.2:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.427761] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    0.427765] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    0.427770] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    0.427774] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.427779] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.427783] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.427787] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff window]
[    0.427792] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[    0.427796] pci_bus 0000:01: resource 1 [mem 0xd0100000-0xd02fffff]
[    0.427801] pci_bus 0000:01: resource 2 [mem 0xd0300000-0xd04fffff 64bit pref]
[    0.427806] pci_bus 0000:02: resource 4 [io  0x0000-0x03af window]
[    0.427810] pci_bus 0000:02: resource 5 [io  0x03e0-0x0cf7 window]
[    0.427815] pci_bus 0000:02: resource 6 [io  0x03b0-0x03df window]
[    0.427819] pci_bus 0000:02: resource 7 [io  0x0d00-0xffff window]
[    0.427823] pci_bus 0000:02: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.427828] pci_bus 0000:02: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.427832] pci_bus 0000:02: resource 10 [mem 0xc0000000-0xffffffff window]
[    0.427837] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.427842] pci_bus 0000:03: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.427846] pci_bus 0000:04: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.427851] pci_bus 0000:05: resource 1 [mem 0xfe900000-0xfe9fffff]
[    0.427937] NET: Registered protocol family 2
[    0.428402] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.428629] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.428983] TCP: Hash tables configured (established 32768 bind 32768)
[    0.429137] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.429211] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.429432] NET: Registered protocol family 1
[    0.429480] pci 0000:00:01.0: Video device with shadowed ROM
[    0.648758] PCI: CLS 64 bytes, default 64
[    0.648927] Trying to unpack rootfs image as initramfs...
[    1.965952] Freeing initrd memory: 35312K (ffff880033af8000 - ffff880035d74000)
[    1.966190] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.966231] software IO TLB [mem 0x96f0e000-0x9af0e000] (64MB) mapped at [ffff880096f0e000-ffff88009af0dfff]
[    1.966336] LVT offset 0 assigned for vector 0x400
[    1.966471] perf: AMD IBS detected (0x000000ff)
[    1.966703] Scanning for low memory corruption every 60 seconds
[    1.967757] futex hash table entries: 512 (order: 3, 32768 bytes)
[    1.967823] audit: initializing netlink subsys (disabled)
[    1.967867] audit: type=2000 audit(1473494004.824:1): initialized
[    1.968762] Initialise system trusted keyring
[    1.969502] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[    1.969511] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.973704] zbud: loaded
[    1.974593] VFS: Disk quotas dquot_6.6.0
[    1.974700] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.975409] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.976539] fuse init (API version 7.23)
[    1.977161] Key type big_key registered
[    1.977222] Allocating IMA MOK and blacklist keyrings.
[    1.978855] Key type asymmetric registered
[    1.978867] Asymmetric key parser 'x509' registered
[    1.979019] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.979157] io scheduler noop registered
[    1.979164] io scheduler deadline registered (default)
[    1.979248] io scheduler cfq registered
[    1.980998] pcieport 0000:00:04.0: Signaling PME through PCIe PME interrupt
[    1.981009] pcie_pme 0000:00:04.0:pcie01: service driver pcie_pme loaded
[    1.981095] pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt
[    1.981100] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    1.981109] pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded
[    1.981163] pcieport 0000:00:15.1: Signaling PME through PCIe PME interrupt
[    1.981167] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[    1.981176] pcie_pme 0000:00:15.1:pcie01: service driver pcie_pme loaded
[    1.981227] pcieport 0000:00:15.2: Signaling PME through PCIe PME interrupt
[    1.981232] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
[    1.981241] pcie_pme 0000:00:15.2:pcie01: service driver pcie_pme loaded
[    1.981259] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.981276] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.981366] efifb: probing for efifb
[    1.981405] efifb: framebuffer at 0xc0000000, mapped to 0xffffc90000800000, using 1984k, total 1984k
[    1.981409] efifb: mode is 800x600x32, linelength=3328, pages=1
[    1.981411] efifb: scrolling: redraw
[    1.981415] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.981874] Console: switching to colour frame buffer device 100x37
[    1.981912] fb0: EFI VGA frame buffer device
[    1.982141] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.982151] ACPI: Power Button [PWRB]
[    1.982260] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    1.982267] ACPI: Power Button [PWRF]
[    1.982446] ACPI: acpi_idle registered with cpuidle
[    1.983438] GHES: HEST is not enabled!
[    1.983782] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.990297] Linux agpgart interface v0.103
[    2.000790] brd: module loaded
[    2.005502] loop: module loaded
[    2.006079] libphy: Fixed MDIO Bus: probed
[    2.006087] tun: Universal TUN/TAP device driver, 1.6
[    2.006090] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    2.006419] PPP generic driver version 2.4.2
[    2.006711] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.006733] ehci-pci: EHCI PCI platform driver
[    2.007125] QUIRK: Enable AMD PLL fix
[    2.007218] ehci-pci 0000:00:12.2: EHCI Host Controller
[    2.007233] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[    2.007245] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    2.007299] ehci-pci 0000:00:12.2: debug port 1
[    2.007381] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb49000
[    2.016305] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    2.016481] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.016487] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.016492] usb usb1: Product: EHCI Host Controller
[    2.016496] usb usb1: Manufacturer: Linux 4.4.0-36-generic ehci_hcd
[    2.016500] usb usb1: SerialNumber: 0000:00:12.2
[    2.017160] hub 1-0:1.0: USB hub found
[    2.017185] hub 1-0:1.0: 5 ports detected
[    2.018239] ehci-pci 0000:00:13.2: EHCI Host Controller
[    2.018255] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[    2.018269] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    2.018320] ehci-pci 0000:00:13.2: debug port 1
[    2.018379] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb47000
[    2.028339] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    2.028522] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    2.028528] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.028533] usb usb2: Product: EHCI Host Controller
[    2.028538] usb usb2: Manufacturer: Linux 4.4.0-36-generic ehci_hcd
[    2.028542] usb usb2: SerialNumber: 0000:00:13.2
[    2.029203] hub 2-0:1.0: USB hub found
[    2.029230] hub 2-0:1.0: 5 ports detected
[    2.030123] ehci-platform: EHCI generic platform driver
[    2.030166] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.030189] ohci-pci: OHCI PCI platform driver
[    2.030547] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    2.030562] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[    2.030623] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb4a000
[    2.088450] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    2.088461] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.088466] usb usb3: Product: OHCI PCI host controller
[    2.088471] usb usb3: Manufacturer: Linux 4.4.0-36-generic ohci_hcd
[    2.088475] usb usb3: SerialNumber: 0000:00:12.0
[    2.089186] hub 3-0:1.0: USB hub found
[    2.089281] hub 3-0:1.0: 5 ports detected
[    2.090226] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    2.090245] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
[    2.090299] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb48000
[    2.148450] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    2.148462] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.148467] usb usb4: Product: OHCI PCI host controller
[    2.148471] usb usb4: Manufacturer: Linux 4.4.0-36-generic ohci_hcd
[    2.148476] usb usb4: SerialNumber: 0000:00:13.0
[    2.149164] hub 4-0:1.0: USB hub found
[    2.149259] hub 4-0:1.0: 5 ports detected
[    2.150265] ohci-pci 0000:00:14.5: OHCI PCI host controller
[    2.150285] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 5
[    2.150348] ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb46000
[    2.208407] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    2.208419] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.208424] usb usb5: Product: OHCI PCI host controller
[    2.208429] usb usb5: Manufacturer: Linux 4.4.0-36-generic ohci_hcd
[    2.208433] usb usb5: SerialNumber: 0000:00:14.5
[    2.209093] hub 5-0:1.0: USB hub found
[    2.209191] hub 5-0:1.0: 2 ports detected
[    2.209490] ohci-platform: OHCI generic platform driver
[    2.209525] uhci_hcd: USB Universal Host Controller Interface driver
[    2.209979] xhci_hcd 0000:00:10.0: xHCI Host Controller
[    2.209995] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6
[    2.210212] xhci_hcd 0000:00:10.0: hcc params 0x014042c3 hci version 0x96 quirks 0x00000608
[    2.210494] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
[    2.210499] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.210504] usb usb6: Product: xHCI Host Controller
[    2.210508] usb usb6: Manufacturer: Linux 4.4.0-36-generic xhci-hcd
[    2.210512] usb usb6: SerialNumber: 0000:00:10.0
[    2.211153] hub 6-0:1.0: USB hub found
[    2.211248] hub 6-0:1.0: 2 ports detected
[    2.211529] xhci_hcd 0000:00:10.0: xHCI Host Controller
[    2.211542] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 7
[    2.213628] usb usb7: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.213684] usb usb7: New USB device found, idVendor=1d6b, idProduct=0003
[    2.213690] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.213694] usb usb7: Product: xHCI Host Controller
[    2.213699] usb usb7: Manufacturer: Linux 4.4.0-36-generic xhci-hcd
[    2.213703] usb usb7: SerialNumber: 0000:00:10.0
[    2.214304] hub 7-0:1.0: USB hub found
[    2.214333] hub 7-0:1.0: 2 ports detected
[    2.214723] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    2.215383] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.215396] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.216319] mousedev: PS/2 mouse device common for all mice
[    2.217317] rtc_cmos 00:03: RTC can wake from S4
[    2.217665] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    2.217709] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    2.217731] i2c /dev entries driver
[    2.217890] device-mapper: uevent: version 1.0.3
[    2.218250] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    2.218309] ledtrig-cpu: registered to indicate activity on CPUs
[    2.218318] EFI Variables Facility v0.08 2004-May-17
[    2.232602] NET: Registered protocol family 10
[    2.233147] NET: Registered protocol family 17
[    2.233178] Key type dns_resolver registered
[    2.233806] microcode: CPU0: patch_level=0x0500010d
[    2.233823] microcode: CPU1: patch_level=0x0500010d
[    2.233953] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    2.234468] registered taskstats version 1
[    2.234499] Loading compiled-in X.509 certificates
[    2.237214] Loaded X.509 cert 'Build time autogenerated kernel key: 181cd957879f68b474ab1d0c92722cd44e756f77'
[    2.237271] zswap: loaded using pool lzo/zbud
[    2.243632] Key type trusted registered
[    2.255406] Key type encrypted registered
[    2.255437] AppArmor: AppArmor sha1 policy hashing enabled
[    2.255447] ima: No TPM chip found, activating TPM-bypass!
[    2.255514] evm: HMAC attrs: 0x1
[    2.256456]   Magic number: 0:848:874
[    2.256738] rtc_cmos 00:03: setting system clock to 2016-09-10 07:53:25 UTC (1473494005)
[    2.257049] acpi-cpufreq: overriding BIOS provided _PSD data
[    2.257277] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    2.257280] EDD information not available.
[    2.257459] PM: Hibernation image not present or could not be loaded.
[    2.262021] Freeing unused kernel memory: 1480K (ffffffff81f42000 - ffffffff820b4000)
[    2.262033] Write protecting the kernel read-only data: 14336k
[    2.264580] Freeing unused kernel memory: 1832K (ffff880001836000 - ffff880001a00000)
[    2.265742] Freeing unused kernel memory: 152K (ffff880001dda000 - ffff880001e00000)
[    2.305132] random: systemd-udevd urandom read with 3 bits of entropy available
[    2.340192] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    2.472868] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    2.476979] [drm] Initialized drm 1.1.0 20060810
[    2.515483] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    2.515854] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    2.516518] acpi device:1e: registered as cooling_device2
[    2.516648] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
[    2.520078] usb 6-1: new high-speed USB device number 2 using xhci_hcd
[    2.540069] usb 3-1: new low-speed USB device number 2 using ohci-pci
[    2.633119] usb 2-1: New USB device found, idVendor=04f2, idProduct=b34a
[    2.633132] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.633137] usb 2-1: Product: HP High Definition 1MP Webcam
[    2.633142] usb 2-1: Manufacturer: Sunplus IT Co 
[    2.667534] [drm] radeon kernel modesetting enabled.
[    2.674514] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    2.674523] AMD IOMMUv2 functionality not available on this system
[    2.683409] CRAT table not found
[    2.683420] Finished initializing topology ret=0
[    2.689356] kfd kfd: Initialized module
[    2.689881] checking generic (c0000000 1f0000) vs hw (c0000000 10000000)
[    2.689888] fb: switching to radeondrmfb from EFI VGA
[    2.689961] Console: switching to colour dummy device 80x25
[    2.697544] wmi: Mapper loaded
[    2.703478] [drm] initializing kernel modesetting (PALM 0x1002:0x9809 0x103C:0x2B02).
[    2.704348] [drm] register mmio base: 0xFEB00000
[    2.704357] [drm] register mmio size: 262144
[    2.704368] [drm] ACPI VFCT contains a BIOS for 00:01.0 1002:9809, size 17408
[    2.704398] ATOM BIOS: AMD
[    2.704512] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used)
[    2.704519] radeon 0000:00:01.0: GTT: 1024M 0x0000000018000000 - 0x0000000057FFFFFF
[    2.704524] [drm] Detected VRAM RAM=384M, BAR=256M
[    2.704527] [drm] RAM width 32bits DDR
[    2.707786] [TTM] Zone  kernel: Available graphics memory: 1808130 kiB
[    2.707796] [TTM] Initializing pool allocator
[    2.707812] [TTM] Initializing DMA pool allocator
[    2.707893] [drm] radeon: 384M of VRAM memory ready
[    2.707897] [drm] radeon: 1024M of GTT memory ready.
[    2.707938] [drm] Loading PALM Microcode
[    2.708243] [drm] Internal thermal controller without fan control
[    2.708380] [drm] Found smc ucode version: 0x00010601
[    2.708461] [drm] radeon: dpm initialized
[    2.708855] [drm] GART: num cpu pages 262144, num gpu pages 262144
[    2.713607] usb 3-1: New USB device found, idVendor=0461, idProduct=0010
[    2.713620] usb 3-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    2.713625] usb 3-1: Product: USB Keyboard
[    2.735526] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[    2.735781] radeon 0000:00:01.0: WB enabled
[    2.735790] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000018000c00 and cpu addr 0xffff88013781ac00
[    2.735796] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000018000c0c and cpu addr 0xffff88013781ac0c
[    2.736830] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90000c32118
[    2.736838] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.736841] [drm] Driver supports precise vblank timestamp query.
[    2.736845] radeon 0000:00:01.0: radeon: MSI limited to 32-bit
[    2.736918] radeon 0000:00:01.0: radeon: using MSI.
[    2.736974] [drm] radeon: irq initialized.
[    2.771621] [drm] ring test on 0 succeeded in 1 usecs
[    2.771640] [drm] ring test on 3 succeeded in 3 usecs
[    2.825234] [drm] ring test on 5 succeeded in 1 usecs
[    2.846172] [drm] UVD initialized successfully.
[    2.847346] [drm] ib test on ring 0 succeeded in 0 usecs
[    2.847437] [drm] ib test on ring 3 succeeded in 0 usecs
[    2.850798] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.851651] r8169 0000:03:00.0 eth0: RTL8105e at 0xffffc9000075c000, 54:be:f7:16:07:f2, XID 00a00000 IRQ 32
[    2.894064] usb 3-2: new low-speed USB device number 3 using ohci-pci
[    2.920467] rtsx_pci 0000:05:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 33
[    2.964097] tsc: Refined TSC clocksource calibration: 1477.313 MHz
[    2.964112] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x154b6b0fa3d, max_idle_ns: 440795221770 ns
[    3.063352] usb 3-2: New USB device found, idVendor=0461, idProduct=4d0f
[    3.063364] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.063369] usb 3-2: Product: USB Optical Mouse
[    3.063374] usb 3-2: Manufacturer: PixArt
[    3.420089] [drm] ib test on ring 5 succeeded
[    3.475629] [drm] radeon atom DIG backlight initialized
[    3.475645] [drm] Radeon Display Connectors
[    3.475648] [drm] Connector 0:
[    3.475651] [drm]   DP-1
[    3.475654] [drm]   HPD1
[    3.475660] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[    3.475662] [drm]   Encoders:
[    3.475665] [drm]     DFP1: INTERNAL_UNIPHY
[    3.475668] [drm] Connector 1:
[    3.475670] [drm]   LVDS-1
[    3.475673] [drm]   HPD2
[    3.475676] [drm]   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[    3.475679] [drm]   Encoders:
[    3.475681] [drm]     LCD1: INTERNAL_UNIPHY
[    3.475683] [drm]     LCD1: TRAVIS
[    3.475685] [drm] Connector 2:
[    3.475688] [drm]   VGA-1
[    3.475692] [drm]   DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[    3.475694] [drm]   Encoders:
[    3.475696] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    3.557069] hidraw: raw HID events driver (C) Jiri Kosina
[    3.596870] usbcore: registered new interface driver usbhid
[    3.596879] usbhid: USB HID core driver
[    3.607100] input: USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/0003:0461:0010.0001/input/input7
[    3.660562] hid-generic 0003:0461:0010.0001: input,hidraw0: USB HID v1.11 Keyboard [USB Keyboard] on usb-0000:00:12.0-1/input0
[    3.663853] input: USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.1/0003:0461:0010.0002/input/input8
[    3.716573] hid-generic 0003:0461:0010.0002: input,hidraw1: USB HID v1.11 Device [USB Keyboard] on usb-0000:00:12.0-1/input1
[    3.717077] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/0003:0461:4D0F.0003/input/input9
[    3.717313] hid-generic 0003:0461:4D0F.0003: input,hidraw2: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:12.0-2/input0
[    3.965106] clocksource: Switched to clocksource tsc
[    4.539107] [drm] fb mappable at 0xC0478000
[    4.539117] [drm] vram apper at 0xC0000000
[    4.539119] [drm] size 5787648
[    4.539122] [drm] fb depth is 24
[    4.539125] [drm]    pitch is 6400
[    4.539579] fbcon: radeondrmfb (fb0) is primary device
[    4.539793] Console: switching to colour frame buffer device 200x56
[    4.539872] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[    4.548865] [drm] Initialized radeon 2.43.0 20080528 for 0000:00:01.0 on minor 0
[    4.549071] ahci 0000:00:11.0: version 3.0
[    4.549673] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0xd impl SATA mode
[    4.549681] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pio slum part sxs 
[    4.564479] scsi host0: ahci
[    4.572735] scsi host1: ahci
[    4.580337] scsi host2: ahci
[    4.586535] scsi host3: ahci
[    4.586776] ata1: SATA max UDMA/133 abar m2048@0xfeb4b000 port 0xfeb4b100 irq 34
[    4.586782] ata2: DUMMY
[    4.586788] ata3: SATA max UDMA/133 abar m2048@0xfeb4b000 port 0xfeb4b200 irq 34
[    4.586793] ata4: SATA max UDMA/133 abar m2048@0xfeb4b000 port 0xfeb4b280 irq 34
[    4.904496] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    4.905862] ata1.00: ATA-9: ST1000DM003-1CH162, HP34, max UDMA/100
[    4.905880] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    4.906881] ata1.00: configured for UDMA/100
[    4.907669] scsi 0:0:0:0: Direct-Access     ATA      ST1000DM003-1CH1 HP34 PQ: 0 ANSI: 5
[    4.908665] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    4.908678] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    4.908788] sd 0:0:0:0: [sda] Write Protect is off
[    4.908795] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.908843] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.909163] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    4.909392] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    4.911943] ata3.00: ATAPI: hp       DVDRAM GT80N, RA05, max UDMA/100
[    4.912257] ata4: SATA link down (SStatus 0 SControl 300)
[    4.916930] ata3.00: configured for UDMA/100
[    4.925194] scsi 2:0:0:0: CD-ROM            hp       DVDRAM GT80N     RA05 PQ: 0 ANSI: 5
[    4.948213] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    4.948227] cdrom: Uniform CD-ROM driver Revision: 3.20
[    4.948632] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    4.948801] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    4.973347]  sda: sda1 sda2 sda3
[    4.974684] sd 0:0:0:0: [sda] Attached SCSI disk
[    7.632513] usb 6-1: device descriptor read/64, error -110
[   12.848210] usb 6-1: device descriptor read/64, error -71
[   13.063957] usb 6-1: new high-speed USB device number 3 using xhci_hcd
[   18.175858] usb 6-1: device descriptor read/64, error -110
[   23.391583] usb 6-1: device descriptor read/64, error -71
[   23.607339] usb 6-1: new high-speed USB device number 4 using xhci_hcd
[   28.619122] xhci_hcd 0000:00:10.0: Command completion event does not match command
[   28.619223] xhci_hcd 0000:00:10.0: Timeout while waiting for setup device command
[   33.834901] xhci_hcd 0000:00:10.0: Timeout while waiting for setup device command
[   34.038717] usb 6-1: device not accepting address 4, error -62
[   34.150718] usb 6-1: new high-speed USB device number 5 using xhci_hcd
[   39.162492] xhci_hcd 0000:00:10.0: Command completion event does not match command
[   39.162594] xhci_hcd 0000:00:10.0: Timeout while waiting for setup device command
[   44.378275] xhci_hcd 0000:00:10.0: Timeout while waiting for setup device command
[   44.582100] usb 6-1: device not accepting address 5, error -62
[   44.582257] usb usb6-port1: unable to enumerate USB device
[   44.694098] usb 6-2: new full-speed USB device number 6 using xhci_hcd
[   44.858748] usb 6-2: New USB device found, idVendor=0a12, idProduct=0001
[   44.858761] usb 6-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   45.383274] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[   45.597005] random: nonblocking pool is initialized
[   46.461877] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[   46.462276] systemd[1]: Detected architecture x86-64.
[   46.477459] systemd[1]: Set hostname to <neumann-20-b315ef>.
[   48.369729] systemd[1]: Reached target Encrypted Volumes.
[   48.370295] systemd[1]: Listening on Journal Audit Socket.
[   48.370402] systemd[1]: Listening on Syslog Socket.
[   48.370788] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   48.370833] systemd[1]: Reached target Remote File Systems (Pre).
[   48.370871] systemd[1]: Reached target User and Group Name Lookups.
[   48.370977] systemd[1]: Listening on Journal Socket (/dev/log).
[   48.371248] systemd[1]: Created slice User and Session Slice.
[   48.371398] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   48.371515] systemd[1]: Listening on udev Control Socket.
[   48.371629] systemd[1]: Listening on Journal Socket.
[   48.371699] systemd[1]: Reached target Remote File Systems.
[   48.371790] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[   48.371996] systemd[1]: Created slice System Slice.
[   48.434467] systemd[1]: Starting Load Kernel Modules...
[   48.436422] systemd[1]: Mounting Debug File System...
[   48.438656] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[   48.440557] systemd[1]: Started Read required files in advance.
[   48.444429] systemd[1]: Mounting POSIX Message Queue File System...
[   48.486131] systemd[1]: Mounting Huge Pages File System...
[   48.488020] systemd[1]: Started Braille Device Support.
[   48.490212] systemd[1]: Starting Uncomplicated firewall...
[   48.490334] systemd[1]: Reached target Slices.
[   48.492305] systemd[1]: Starting Set console keymap...
[   48.495466] systemd[1]: Starting Journal Service...
[   48.496083] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[   48.496295] systemd[1]: Listening on udev Kernel Socket.
[   48.496426] systemd[1]: Listening on fsck to fsckd communication Socket.
[   48.751136] systemd[1]: Started Create list of required static device nodes for the current kernel.
[   48.766497] systemd[1]: Starting Create Static Device Nodes in /dev...
[   48.812886] systemd[1]: Started Uncomplicated firewall.
[   49.072563] systemd[1]: Mounted Debug File System.
[   49.074303] systemd[1]: Mounted Huge Pages File System.
[   49.074416] systemd[1]: Mounted POSIX Message Queue File System.
[   49.405996] systemd[1]: Started Journal Service.
[   49.823696] lp: driver loaded but no devices found
[   49.883286] ppdev: user-space parallel port driver
[   51.563851] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[   51.694666] systemd-journald[812]: Received request to flush runtime journal from PID 1
[   51.797102] usb 3-2: USB disconnect, device number 3
[   53.032475] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   53.221069] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[   53.225646] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[   53.373346] usb 3-2: new low-speed USB device number 4 using ohci-pci
[   53.542555] usb 3-2: New USB device found, idVendor=0461, idProduct=4d0f
[   53.542570] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   53.542575] usb 3-2: Product: USB Optical Mouse
[   53.542580] usb 3-2: Manufacturer: PixArt
[   53.550467] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/0003:0461:4D0F.0004/input/input10
[   53.552816] hid-generic 0003:0461:4D0F.0004: input,hidraw2: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:12.0-2/input0
[   54.302436] media: Linux media interface: v0.10
[   54.520380] Linux video capture interface: v2.00
[   54.547431] Bluetooth: Core ver 2.21
[   54.547483] NET: Registered protocol family 31
[   54.547487] Bluetooth: HCI device and connection manager initialized
[   54.547500] Bluetooth: HCI socket layer initialized
[   54.547508] Bluetooth: L2CAP socket layer initialized
[   54.547534] Bluetooth: SCO socket layer initialized
[   54.609182] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line
[   54.609197] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
[   54.609203] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[   54.609208] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   54.609212] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   54.609366] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[   54.609415] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[   54.621080] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[   54.621321] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[   54.621700] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
[   55.322910] usbcore: registered new interface driver btusb
[   55.340670] uvcvideo: Found UVC 1.00 device HP High Definition 1MP Webcam (04f2:b34a)
[   55.360370] input: HP High Definition 1MP Webcam as /devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1:1.0/input/input14
[   55.360597] usbcore: registered new interface driver uvcvideo
[   55.360602] USB Video Class driver (1.1.1)
[   55.519485] kvm: disabled by bios
[   55.546663] kvm: disabled by bios
[   55.796217] ACPI Error: Field [D128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20150930/dsopcode-236)
[   55.796239] ACPI Error: Method parse/execution failed [\HWMC] (Node ffff88013a8aea00), AE_AML_BUFFER_LIMIT (20150930/psparse-542)
[   55.796262] ACPI Error: Method parse/execution failed [\_SB.WMID.WMAA] (Node ffff88013a8b0898), AE_AML_BUFFER_LIMIT (20150930/psparse-542)
[   55.796366] ACPI Error: Field [D128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20150930/dsopcode-236)
[   55.796375] ACPI Error: Method parse/execution failed [\HWMC] (Node ffff88013a8aea00), AE_AML_BUFFER_LIMIT (20150930/psparse-542)
[   55.796391] ACPI Error: Method parse/execution failed [\_SB.WMID.WMAA] (Node ffff88013a8b0898), AE_AML_BUFFER_LIMIT (20150930/psparse-542)
[   55.796488] ACPI Error: Field [D128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20150930/dsopcode-236)
[   55.796497] ACPI Error: Method parse/execution failed [\HWMC] (Node ffff88013a8aea00), AE_AML_BUFFER_LIMIT (20150930/psparse-542)
[   55.796511] ACPI Error: Method parse/execution failed [\_SB.WMID.WMAA] (Node ffff88013a8b0898), AE_AML_BUFFER_LIMIT (20150930/psparse-542)
[   55.796676] input: HP WMI hotkeys as /devices/virtual/input/input15
[   55.798888] ACPI Error: Field [D128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20150930/dsopcode-236)
[   55.798908] ACPI Error: Method parse/execution failed [\HWMC] (Node ffff88013a8aea00), AE_AML_BUFFER_LIMIT (20150930/psparse-542)
[   55.798931] ACPI Error: Method parse/execution failed [\_SB.WMID.WMAA] (Node ffff88013a8b0898), AE_AML_BUFFER_LIMIT (20150930/psparse-542)
[   55.799029] ACPI Error: Field [D128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20150930/dsopcode-236)
[   55.799038] ACPI Error: Method parse/execution failed [\HWMC] (Node ffff88013a8aea00), AE_AML_BUFFER_LIMIT (20150930/psparse-542)
[   55.799053] ACPI Error: Method parse/execution failed [\_SB.WMID.WMAA] (Node ffff88013a8b0898), AE_AML_BUFFER_LIMIT (20150930/psparse-542)
[   56.005313] ath9k 0000:04:00.0: enabling device (0100 -> 0102)
[   56.012687] ath: phy0: Enable LNA combining
[   56.013852] ath: phy0: ASPM enabled: 0x43
[   56.013859] ath: EEPROM regdomain: 0x60
[   56.013862] ath: EEPROM indicates we should expect a direct regpair map
[   56.013869] ath: Country alpha2 being used: 00
[   56.013872] ath: Regpair used: 0x60
[   56.474712] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   56.475773] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90001200000, irq=17
[   57.776378] cfg80211: World regulatory domain updated:
[   57.776393] cfg80211:  DFS Master region: unset
[   57.776397] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   57.776404] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   57.776409] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   57.776413] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   57.776418] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   57.776423] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   57.776428] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   57.776432] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   57.776436] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   58.867749] Adding 3757052k swap on /dev/sda3.  Priority:-1 extents:1 across:3757052k FS
[   65.979976] audit: type=1400 audit(1473494069.220:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=2182 comm="apparmor_parser"
[   65.981549] audit: type=1400 audit(1473494069.224:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=2182 comm="apparmor_parser"
[   65.982666] audit: type=1400 audit(1473494069.224:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=2182 comm="apparmor_parser"
[   65.983720] audit: type=1400 audit(1473494069.224:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=2182 comm="apparmor_parser"
[   66.215002] audit: type=1400 audit(1473494069.456:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=2183 comm="apparmor_parser"
[   66.216435] audit: type=1400 audit(1473494069.456:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=2183 comm="apparmor_parser"
[   69.363125] audit: type=1400 audit(1473494072.604:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app" pid=2189 comm="apparmor_parser"
[   69.365037] audit: type=1400 audit(1473494072.608:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app//oxide_helper" pid=2189 comm="apparmor_parser"
[   69.624428] audit: type=1400 audit(1473494072.864:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=2191 comm="apparmor_parser"
[   71.685320] audit: type=1400 audit(1473494074.928:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/mission-control-5" pid=2193 comm="apparmor_parser"
[   71.687154] audit: type=1400 audit(1473494074.928:12): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*" pid=2193 comm="apparmor_parser"
[   71.688942] audit: type=1400 audit(1473494074.932:13): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*//pxgsettings" pid=2193 comm="apparmor_parser"
[   71.690173] audit: type=1400 audit(1473494074.932:14): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*//sanitized_helper" pid=2193 comm="apparmor_parser"
[   71.691232] audit: type=1400 audit(1473494074.932:15): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-ofono" pid=2193 comm="apparmor_parser"
[   72.067343] audit: type=1400 audit(1473494075.308:16): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=2195 comm="apparmor_parser"
[   73.090471] audit: type=1400 audit(1473494076.332:17): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2197 comm="apparmor_parser"
[   73.091824] audit: type=1400 audit(1473494076.332:18): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=2197 comm="apparmor_parser"
[   73.092738] audit: type=1400 audit(1473494076.336:19): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=2197 comm="apparmor_parser"
[   73.253571] audit: type=1400 audit(1473494076.496:20): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=2199 comm="apparmor_parser"
[   77.028991] audit_printk_skb: 3 callbacks suppressed
[   77.029003] audit: type=1400 audit(1473494080.272:22): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=2185 comm="apparmor_parser"
[   77.031056] audit: type=1400 audit(1473494080.272:23): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=2185 comm="apparmor_parser"
[   77.034135] audit: type=1400 audit(1473494080.276:24): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=2185 comm="apparmor_parser"
[   77.035679] audit: type=1400 audit(1473494080.276:25): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer//sanitized_helper" pid=2185 comm="apparmor_parser"
[   77.038266] audit: type=1400 audit(1473494080.280:26): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-thumbnailer" pid=2185 comm="apparmor_parser"
[   77.039744] audit: type=1400 audit(1473494080.280:27): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-thumbnailer//sanitized_helper" pid=2185 comm="apparmor_parser"
[   78.437374] cgroup: new mount options do not match the existing superblock, will be ignored
[   79.881376] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   79.881389] Bluetooth: BNEP filters: protocol multicast
[   79.881401] Bluetooth: BNEP socket layer initialized
[   80.707097] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   80.717832] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   81.054899] r8169 0000:03:00.0 eth0: link down
[   81.054934] r8169 0000:03:00.0 eth0: link down
[   81.055035] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   82.769493] r8169 0000:03:00.0 eth0: link up
[   82.769532] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   93.107148] Bluetooth: RFCOMM TTY layer initialized
[   93.107179] Bluetooth: RFCOMM socket layer initialized
[   93.107197] Bluetooth: RFCOMM ver 1.11
[21943.098010] perf interrupt took too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[22683.637324] usb 1-3: new high-speed USB device number 4 using ehci-pci
[22683.770827] usb 1-3: New USB device found, idVendor=13fd, idProduct=1240
[22683.770845] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[22683.770855] usb 1-3: Product: External        
[22683.770862] usb 1-3: Manufacturer: Generic 
[22683.770870] usb 1-3: SerialNumber: 87SUF4MAS               
[22683.903707] usb-storage 1-3:1.0: USB Mass Storage device detected
[22683.910596] scsi host4: usb-storage 1-3:1.0
[22683.910910] usbcore: registered new interface driver usb-storage
[22683.944092] usbcore: registered new interface driver uas
[22684.911151] scsi 4:0:0:0: Direct-Access     Generic  External         1.04 PQ: 0 ANSI: 4
[22684.912509] sd 4:0:0:0: Attached scsi generic sg2 type 0
[22684.918942] sd 4:0:0:0: [sdb] 390721968 512-byte logical blocks: (200 GB/186 GiB)
[22684.921611] sd 4:0:0:0: [sdb] Write Protect is off
[22684.921625] sd 4:0:0:0: [sdb] Mode Sense: 21 00 00 00
[22684.923197] sd 4:0:0:0: [sdb] No Caching mode page found
[22684.923222] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[22684.946332]  sdb: sdb1
[22684.950766] sd 4:0:0:0: [sdb] Attached SCSI disk
[22685.332913] sd 4:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
[22685.332938] sd 4:0:0:0: [sdb] tag#0 Sense Key : Hardware Error [current] [descriptor] 
[22685.332949] sd 4:0:0:0: [sdb] tag#0 Add. Sense: No additional sense information
[22685.333002] sd 4:0:0:0: [sdb] tag#0 CDB: ATA command pass through(16) 85 06 20 00 00 00 00 00 00 00 00 00 00 00 e5 00
[22685.777077] sd 4:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
[22685.777101] sd 4:0:0:0: [sdb] tag#0 Sense Key : Hardware Error [current] [descriptor] 
[22685.777113] sd 4:0:0:0: [sdb] tag#0 Add. Sense: No additional sense information
[22685.777128] sd 4:0:0:0: [sdb] tag#0 CDB: ATA command pass through(12)/Blank a1 06 20 da 00 00 4f c2 00 b0 00 00
[22896.661174] sd 4:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
[22896.661198] sd 4:0:0:0: [sdb] tag#0 Sense Key : Hardware Error [current] [descriptor] 
[22896.661210] sd 4:0:0:0: [sdb] tag#0 Add. Sense: No additional sense information
[22896.661225] sd 4:0:0:0: [sdb] tag#0 CDB: ATA command pass through(16) 85 06 20 00 00 00 00 00 00 00 00 00 00 00 e5 00
[22897.222319] sd 4:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
[22897.222345] sd 4:0:0:0: [sdb] tag#0 Sense Key : Hardware Error [current] [descriptor] 
[22897.222356] sd 4:0:0:0: [sdb] tag#0 Add. Sense: No additional sense information
[22897.222372] sd 4:0:0:0: [sdb] tag#0 CDB: ATA command pass through(12)/Blank a1 06 20 da 00 00 4f c2 00 b0 00 00
[23496.671287] sd 4:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
[23496.671312] sd 4:0:0:0: [sdb] tag#0 Sense Key : Hardware Error [current] [descriptor] 
[23496.671323] sd 4:0:0:0: [sdb] tag#0 Add. Sense: No additional sense information
[23496.671339] sd 4:0:0:0: [sdb] tag#0 CDB: ATA command pass through(16) 85 06 20 00 00 00 00 00 00 00 00 00 00 00 e5 00
[23497.247931] sd 4:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
[23497.247957] sd 4:0:0:0: [sdb] tag#0 Sense Key : Hardware Error [current] [descriptor] 
[23497.247968] sd 4:0:0:0: [sdb] tag#0 Add. Sense: No additional sense information
[23497.247983] sd 4:0:0:0: [sdb] tag#0 CDB: ATA command pass through(12)/Blank a1 06 20 da 00 00 4f c2 00 b0 00 00
[24096.599175] sd 4:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
[24096.599200] sd 4:0:0:0: [sdb] tag#0 Sense Key : Hardware Error [current] [descriptor] 
[24096.599211] sd 4:0:0:0: [sdb] tag#0 Add. Sense: No additional sense information
[24096.599227] sd 4:0:0:0: [sdb] tag#0 CDB: ATA command pass through(16) 85 06 20 00 00 00 00 00 00 00 00 00 00 00 e5 00
[24097.172565] sd 4:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
[24097.172589] sd 4:0:0:0: [sdb] tag#0 Sense Key : Hardware Error [current] [descriptor] 
[24097.172601] sd 4:0:0:0: [sdb] tag#0 Add. Sense: No additional sense information
[24097.172616] sd 4:0:0:0: [sdb] tag#0 CDB: ATA command pass through(12)/Blank a1 06 20 da 00 00 4f c2 00 b0 00 00
[24696.566871] sd 4:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
[24696.566890] sd 4:0:0:0: [sdb] tag#0 Sense Key : Hardware Error [current] [descriptor] 
[24696.566897] sd 4:0:0:0: [sdb] tag#0 Add. Sense: No additional sense information
[24696.566907] sd 4:0:0:0: [sdb] tag#0 CDB: ATA command pass through(16) 85 06 20 00 00 00 00 00 00 00 00 00 00 00 e5 00
[24697.139073] sd 4:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
[24697.139098] sd 4:0:0:0: [sdb] tag#0 Sense Key : Hardware Error [current] [descriptor] 
[24697.139109] sd 4:0:0:0: [sdb] tag#0 Add. Sense: No additional sense information
[24697.139125] sd 4:0:0:0: [sdb] tag#0 CDB: ATA command pass through(12)/Blank a1 06 20 da 00 00 4f c2 00 b0 00 00
[25296.368438] sd 4:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
[25296.368456] sd 4:0:0:0: [sdb] tag#0 Sense Key : Hardware Error [current] [descriptor] 
[25296.368463] sd 4:0:0:0: [sdb] tag#0 Add. Sense: No additional sense information
[25296.368474] sd 4:0:0:0: [sdb] tag#0 CDB: ATA command pass through(16) 85 06 20 00 00 00 00 00 00 00 00 00 00 00 e5 00
[25296.921115] sd 4:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
[25296.921140] sd 4:0:0:0: [sdb] tag#0 Sense Key : Hardware Error [current] [descriptor] 
[25296.921147] sd 4:0:0:0: [sdb] tag#0 Add. Sense: No additional sense information
[25296.921159] sd 4:0:0:0: [sdb] tag#0 CDB: ATA command pass through(12)/Blank a1 06 20 da 00 00 4f c2 00 b0 00 00
[25896.214669] sd 4:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
[25896.214687] sd 4:0:0:0: [sdb] tag#0 Sense Key : Hardware Error [current] [descriptor] 
[25896.214693] sd 4:0:0:0: [sdb] tag#0 Add. Sense: No additional sense information
[25896.214703] sd 4:0:0:0: [sdb] tag#0 CDB: ATA command pass through(16) 85 06 20 00 00 00 00 00 00 00 00 00 00 00 e5 00
[25896.761001] sd 4:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
[25896.761024] sd 4:0:0:0: [sdb] tag#0 Sense Key : Hardware Error [current] [descriptor] 
[25896.761036] sd 4:0:0:0: [sdb] tag#0 Add. Sense: No additional sense information
[25896.761051] sd 4:0:0:0: [sdb] tag#0 CDB: ATA command pass through(12)/Blank a1 06 20 da 00 00 4f c2 00 b0 00 00
[26496.220093] sd 4:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
[26496.220117] sd 4:0:0:0: [sdb] tag#0 Sense Key : Hardware Error [current] [descriptor] 
[26496.220129] sd 4:0:0:0: [sdb] tag#0 Add. Sense: No additional sense information
[26496.220144] sd 4:0:0:0: [sdb] tag#0 CDB: ATA command pass through(16) 85 06 20 00 00 00 00 00 00 00 00 00 00 00 e5 00
[26496.756469] sd 4:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
[26496.756494] sd 4:0:0:0: [sdb] tag#0 Sense Key : Hardware Error [current] [descriptor] 
[26496.756505] sd 4:0:0:0: [sdb] tag#0 Add. Sense: No additional sense information
[26496.756521] sd 4:0:0:0: [sdb] tag#0 CDB: ATA command pass through(12)/Blank a1 06 20 da 00 00 4f c2 00 b0 00 00
[27096.214341] sd 4:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
[27096.214366] sd 4:0:0:0: [sdb] tag#0 Sense Key : Hardware Error [current] [descriptor] 
[27096.214377] sd 4:0:0:0: [sdb] tag#0 Add. Sense: No additional sense information
[27096.214392] sd 4:0:0:0: [sdb] tag#0 CDB: ATA command pass through(16) 85 06 20 00 00 00 00 00 00 00 00 00 00 00 e5 00
[27096.766861] sd 4:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
[27096.766886] sd 4:0:0:0: [sdb] tag#0 Sense Key : Hardware Error [current] [descriptor] 
[27096.766897] sd 4:0:0:0: [sdb] tag#0 Add. Sense: No additional sense information
[27096.766912] sd 4:0:0:0: [sdb] tag#0 CDB: ATA command pass through(12)/Blank a1 06 20 da 00 00 4f c2 00 b0 00 00
[27696.181059] sd 4:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
[27696.181083] sd 4:0:0:0: [sdb] tag#0 Sense Key : Hardware Error [current] [descriptor] 
[27696.181095] sd 4:0:0:0: [sdb] tag#0 Add. Sense: No additional sense information
[27696.181110] sd 4:0:0:0: [sdb] tag#0 CDB: ATA command pass through(16) 85 06 20 00 00 00 00 00 00 00 00 00 00 00 e5 00
[27696.734713] sd 4:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
[27696.734738] sd 4:0:0:0: [sdb] tag#0 Sense Key : Hardware Error [current] [descriptor] 
[27696.734750] sd 4:0:0:0: [sdb] tag#0 Add. Sense: No additional sense information
[27696.734765] sd 4:0:0:0: [sdb] tag#0 CDB: ATA command pass through(12)/Blank a1 06 20 da 00 00 4f c2 00 b0 00 00
[28296.153308] sd 4:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
[28296.153332] sd 4:0:0:0: [sdb] tag#0 Sense Key : Hardware Error [current] [descriptor] 
[28296.153343] sd 4:0:0:0: [sdb] tag#0 Add. Sense: No additional sense information
[28296.153352] sd 4:0:0:0: [sdb] tag#0 CDB: ATA command pass through(16) 85 06 20 00 00 00 00 00 00 00 00 00 00 00 e5 00
[28296.716228] sd 4:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
[28296.716248] sd 4:0:0:0: [sdb] tag#0 Sense Key : Hardware Error [current] [descriptor] 
[28296.716256] sd 4:0:0:0: [sdb] tag#0 Add. Sense: No additional sense information
[28296.716267] sd 4:0:0:0: [sdb] tag#0 CDB: ATA command pass through(12)/Blank a1 06 20 da 00 00 4f c2 00 b0 00 00
[28656.608385] usb 6-1: new high-speed USB device number 7 using xhci_hcd
[28656.738776] usb 6-1: New USB device found, idVendor=1a40, idProduct=0101
[28656.738795] usb 6-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[28656.738804] usb 6-1: Product: USB 2.0 Hub
[28656.740855] hub 6-1:1.0: USB hub found
[28656.745245] hub 6-1:1.0: 4 ports detected
[28657.024344] usb 6-1.3: new high-speed USB device number 8 using xhci_hcd
[28657.117149] usb 6-1.3: New USB device found, idVendor=13fe, idProduct=1d00
[28657.117167] usb 6-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[28657.117176] usb 6-1.3: Product: USB DISK 2.0    
[28657.117184] usb 6-1.3: Manufacturer:         
[28657.117191] usb 6-1.3: SerialNumber: 077A144B000C
[28657.118532] usb-storage 6-1.3:1.0: USB Mass Storage device detected
[28657.118901] scsi host5: usb-storage 6-1.3:1.0
[28657.192326] usb 6-1.4: new high-speed USB device number 9 using xhci_hcd
[28657.299743] usb 6-1.4: New USB device found, idVendor=03f0, idProduct=a011
[28657.299762] usb 6-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[28657.299771] usb 6-1.4: Product: Deskjet 3050A J611 series
[28657.299779] usb 6-1.4: Manufacturer: HP
[28657.299787] usb 6-1.4: SerialNumber: CN2BI1GH1H05WK
[28658.117535] scsi 5:0:0:0: Direct-Access              USB DISK 2.0     PMAP PQ: 0 ANSI: 0 CCS
[28658.121204] sd 5:0:0:0: Attached scsi generic sg3 type 0
[28658.322550] WARNING! power/level is deprecated; use power/control instead
[28658.352949] sd 5:0:0:0: [sdc] 16121856 512-byte logical blocks: (8.25 GB/7.69 GiB)
[28658.353441] sd 5:0:0:0: [sdc] Write Protect is off
[28658.353450] sd 5:0:0:0: [sdc] Mode Sense: 23 00 00 00
[28658.353649] sd 5:0:0:0: [sdc] No Caching mode page found
[28658.353658] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[28658.355524]  sdc: sdc1
[28658.358764] sd 5:0:0:0: [sdc] Attached SCSI removable disk
[28658.423791] usblp 6-1.4:1.1: usblp0: USB Bidirectional printer dev 9 if 1 alt 0 proto 2 vid 0x03F0 pid 0xA011
[28658.429969] usbcore: registered new interface driver usblp
[28659.018766] FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[28663.782356] usblp0: removed
[28663.824685] usblp 6-1.4:1.1: usblp0: USB Bidirectional printer dev 9 if 1 alt 0 proto 2 vid 0x03F0 pid 0xA011
[28664.440064] usblp0: removed
[28832.136092] usblp 6-1.4:1.1: usblp0: USB Bidirectional printer dev 9 if 1 alt 0 proto 2 vid 0x03F0 pid 0xA011
[28832.294526] usblp0: removed
[28852.837590] usblp 6-1.4:1.1: usblp0: USB Bidirectional printer dev 9 if 1 alt 0 proto 2 vid 0x03F0 pid 0xA011
[28896.190198] sd 4:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
[28896.190223] sd 4:0:0:0: [sdb] tag#0 Sense Key : Hardware Error [current] [descriptor] 
[28896.190234] sd 4:0:0:0: [sdb] tag#0 Add. Sense: No additional sense information
[28896.190250] sd 4:0:0:0: [sdb] tag#0 CDB: ATA command pass through(16) 85 06 20 00 00 00 00 00 00 00 00 00 00 00 e5 00
[28896.728097] sd 4:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
[28896.728122] sd 4:0:0:0: [sdb] tag#0 Sense Key : Hardware Error [current] [descriptor] 
[28896.728134] sd 4:0:0:0: [sdb] tag#0 Add. Sense: No additional sense information
[28896.728150] sd 4:0:0:0: [sdb] tag#0 CDB: ATA command pass through(12)/Blank a1 06 20 da 00 00 4f c2 00 b0 00 00
[29315.780497] usblp0: removed
[29406.158794] usblp 6-1.4:1.1: usblp0: USB Bidirectional printer dev 9 if 1 alt 0 proto 2 vid 0x03F0 pid 0xA011
[29496.049314] sd 4:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
[29496.049338] sd 4:0:0:0: [sdb] tag#0 Sense Key : Hardware Error [current] [descriptor] 
[29496.049349] sd 4:0:0:0: [sdb] tag#0 Add. Sense: No additional sense information
[29496.049358] sd 4:0:0:0: [sdb] tag#0 CDB: ATA command pass through(16) 85 06 20 00 00 00 00 00 00 00 00 00 00 00 e5 00
[29496.609717] sd 4:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
[29496.609741] sd 4:0:0:0: [sdb] tag#0 Sense Key : Hardware Error [current] [descriptor] 
[29496.609753] sd 4:0:0:0: [sdb] tag#0 Add. Sense: No additional sense information
[29496.609769] sd 4:0:0:0: [sdb] tag#0 CDB: ATA command pass through(12)/Blank a1 06 20 da 00 00 4f c2 00 b0 00 00
[30095.932228] sd 4:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
[30095.932246] sd 4:0:0:0: [sdb] tag#0 Sense Key : Hardware Error [current] [descriptor] 
[30095.932253] sd 4:0:0:0: [sdb] tag#0 Add. Sense: No additional sense information
[30095.932263] sd 4:0:0:0: [sdb] tag#0 CDB: ATA command pass through(16) 85 06 20 00 00 00 00 00 00 00 00 00 00 00 e5 00
[30096.476899] sd 4:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
[30096.476920] sd 4:0:0:0: [sdb] tag#0 Sense Key : Hardware Error [current] [descriptor] 
[30096.476928] sd 4:0:0:0: [sdb] tag#0 Add. Sense: No additional sense information
[30096.476939] sd 4:0:0:0: [sdb] tag#0 CDB: ATA command pass through(12)/Blank a1 06 20 da 00 00 4f c2 00 b0 00 00
neumann@neumann-20-b315ef:~$ 
neumann@neumann-20-b315ef:~$ gedit
neumann@neumann-20-b315ef:~$ gedit
neumann@neumann-20-b315ef:~$ systemd-analyze blame
         22.789s apparmor.service
          7.744s NetworkManager-wait-online.service
          7.479s winbind.service
          7.240s nmbd.service
          6.520s samba-ad-dc.service
          3.694s dev-sda2.device
          3.266s accounts-daemon.service
          2.711s snapd.firstboot.service
          2.530s networking.service
          2.501s grub-common.service
          2.357s smbd.service
          1.962s systemd-logind.service
          1.953s upower.service
          1.930s NetworkManager.service
          1.900s ModemManager.service
          1.815s lightdm.service
          1.777s systemd-udevd.service
          1.712s console-setup.service
          1.707s irqbalance.service
          1.669s ondemand.service
          1.601s systemd-user-sessions.service
          1.600s gpu-manager.service
          1.583s rsyslog.service
          1.560s pppd-dns.service
          1.547s iio-sensor-proxy.service
          1.530s thermald.service
          1.482s bluetooth.service
          1.446s colord.service
          1.356s systemd-modules-load.service
          1.173s keyboard-setup.service
           935ms binfmt-support.service
           871ms avahi-daemon.service
           852ms apport.service
           822ms polkitd.service
           767ms systemd-tmpfiles-setup-dev.service
           723ms dev-sda3.swap
           684ms dev-hugepages.mount
           678ms sys-kernel-debug.mount
           675ms systemd-journald.service
           673ms dev-mqueue.mount
           597ms systemd-fsck-root.service
           565ms udisks2.service
           530ms systemd-fsck@dev-disk-by\x2duuid-2C62\x2d36A3.service
           480ms ufw.service
           478ms kmod-static-nodes.service
           421ms wpa_supplicant.service
           361ms proc-sys-fs-binfmt_misc.mount
           297ms dns-clean.service
           284ms systemd-update-utmp.service
           265ms systemd-backlight@backlight:acpi_video0.service
           263ms systemd-rfkill.service
           213ms plymouth-start.service
           199ms systemd-udev-trigger.service
           188ms speech-dispatcher.service
           172ms apache2.service
           170ms setvtrgb.service
           159ms user@1000.service
           143ms systemd-timesyncd.service
           123ms systemd-tmpfiles-setup.service
           116ms systemd-sysctl.service
           100ms systemd-localed.service
            88ms systemd-hostnamed.service
            84ms systemd-journal-flush.service
            82ms boot-efi.mount
            71ms systemd-update-utmp-runlevel.service
            57ms rtkit-daemon.service
            56ms alsa-restore.service
            54ms resolvconf.service
            54ms systemd-random-seed.service
            46ms snapd.boot-ok.service
            43ms rc-local.service
            37ms systemd-remount-fs.service
            24ms plymouth-quit-wait.service
            22ms ureadahead-stop.service
            16ms systemd-backlight@backlight:radeon_bl0.service
            15ms plymouth-read-write.service
             9ms sys-fs-fuse-connections.mount
             4ms snapd.socket
lines 56-78/78 (END)

Hors ligne

#22 Le 28/09/2016, à 15:36

patmeu

Re : démarrage ubuntu 16.04 [résolu]

Bonjour.
Je reviens vers vous après quelques semaines de congés.
<<<<<j'ai malheureusement fait une grosse "co....ie".
J'ai voulu créer un disque de démarrage ubuntu sur CD et je l'ai fait sur le Hdisk externe et évidement formaté celui-ci.
Je n'arrive plus à supprimer l'image ISO de ubuntu 16 sur le disque dur Comment dois je faire.
Cordialement.
PS pour Malbo et bougron, merci de votre aide mais mon PC met toujours un temps fou à démarrer sauf sur Generic 4.

Hors ligne

#23 Le 28/09/2016, à 17:44

moko138

Re : démarrage ubuntu 16.04 [résolu]

1) DDE non branché,
peux-tu donner

sudo parted -l

?
  - -
2) Idem mais DDE branché.

Merci !
=============

EDIT :  Ouvre un autre fil et on traitera ce nouveau sujet là-bas.
Le règlement du forum le veut.

Dernière modification par moko138 (Le 28/09/2016, à 17:47)


%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel :  À la découverte de dcraw

Hors ligne

#24 Le 28/09/2016, à 19:19

Bougron

Re : démarrage ubuntu 16.04 [résolu]

patmeu a écrit :

Bonjour.
.......
PS pour Malbo et bougron, merci de votre aide mais mon PC met toujours un temps fou à démarrer sauf sur Generic 4.

Bonjour.
Peux-tu indiquer exactement le contenu de la ligne de boot qui est affichée et que tu appelles généric 4
merci.

Hors ligne

#25 Le 28/09/2016, à 19:48

patmeu

Re : démarrage ubuntu 16.04 [résolu]

Réponse à MOKO 138 j'ai finalement réussit à faire une partition avec Gparted et récupérer mon DDE. J'ai pu recharger une sauvegarde externe de mai 2016 et tout est OK. Sauf ce que j'ai perdu, mais il faut payer le prix des "CO...IES". Cordialement Patmeu

Hors ligne