#1 Le 02/10/2016, à 16:37
- qolepam
sélectionner toutes les lignes du terminal
bonjour,
Travaillant sous Ubuntu 14.04 LTS,,j'ai généré dans le terminal un grand nombre de lignes que j'aimerais toutes sélectionner:
je m'explique:quand je sélectionne le tout,je n'arrive pas à descendre plus bas dans le Terminal pour sélectionner les autres lignes donc je n'arrive pas à tout sélectionner.
Une astuce,un raccourcis pour cela?
merci de votre aide
Hors ligne
#2 Le 02/10/2016, à 16:51
- pingouinux
Re : sélectionner toutes les lignes du terminal
Bonjour,
Tu cliques gauche au début de ce que tu veux sélectionner, et tu descends (en gardant le bouton appuyé) au-delà du bas du terminal, ce qui va faire défiler le contenu de la fenêtre.
Tu peux faire la même chose à partir du bas.
Le nombre de lignes dans le terminal est néanmoins limité.
Hors ligne
#3 Le 02/10/2016, à 18:21
- Sciensous
Re : sélectionner toutes les lignes du terminal
ou mettre la sortie génerée dans un fichier 
antiX 19 et 21 et Ubuntu 20.04 et 22.04
( sous LXDE et gnome-shell )
Hors ligne
#4 Le 02/10/2016, à 19:17
- MicP
Re : sélectionner toutes les lignes du terminal
Ou, peut-être, suivant l'émulateur de terminal, Ctrl+Maj+a
Hors ligne
#5 Le 02/10/2016, à 19:18
- Watael
Re : sélectionner toutes les lignes du terminal
« le terminal » n'est pas une description très fiable : moi, je n'utilise que xterm. et toi ? gnome-terminal, konsole, xfce-terminal...?
ici, c'est plutôt la section "mouse-less".
mais, pourquoi veux-tu sélectionner dans la "fenêtre terminal" (voir plus haut) ?
Connected \o/
Welcome to sHell. · eval is evil.
Hors ligne
#6 Le 09/08/2017, à 17:26
- qolepam
Re : sélectionner toutes les lignes du terminal
...et pour générer un fichier texte comprenant non pas seulement l'historique mais la ou les sorties générées par une ou plusieurs lignes de commandes?
???????> fichier_texte.txt
Hors ligne
#7 Le 09/08/2017, à 18:41
- moko138
Re : sélectionner toutes les lignes du terminal
qolepam a écrit :
...et pour générer un fichier texte comprenant non pas seulement l'historique mais la ou les sorties générées par une ou plusieurs lignes de commandes?
Regarde ce que ceci rend chez toi :
echo "lsb_release -d" >> toto.txt
lsb_release -d >> toto.txt
echo -e ' = = = = =\n' >> toto.txt
echo "sudo lshw" >> toto.txt
sudo lshw >> toto.txtecho -e ' = = = = =\n' >> toto.txt
echo "printenv GDMSESSION" >> toto.txt
printenv GDMSESSION >> toto.txt
echo -e ' = = = = =\n' >> toto.txt
echo "uname -mr" >> toto.txt
uname -mr >> toto.txt
echo -e ' = = = = =\n' >> toto.txt%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#8 Le 13/05/2020, à 12:51
- dragut
Re : sélectionner toutes les lignes du terminal
dmesg :
[ 0.000000] found SMP MP-table at [mem 0x000fd730-0x000fd73f]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x3ef91000, 0x3ef91fff] PGTABLE
[ 0.000000] BRK [0x3ef92000, 0x3ef92fff] PGTABLE
[ 0.000000] BRK [0x3ef93000, 0x3ef93fff] PGTABLE
[ 0.000000] BRK [0x3ef94000, 0x3ef94fff] PGTABLE
[ 0.000000] BRK [0x3ef95000, 0x3ef95fff] PGTABLE
[ 0.000000] BRK [0x3ef96000, 0x3ef96fff] PGTABLE
[ 0.000000] BRK [0x3ef97000, 0x3ef97fff] PGTABLE
[ 0.000000] BRK [0x3ef98000, 0x3ef98fff] PGTABLE
[ 0.000000] BRK [0x3ef99000, 0x3ef99fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x334c9000-0x35a5bfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 0x000000009CD98080 000084 (v01 LENOVO TC-03 00001110 AMI 00010013)
[ 0.000000] ACPI: FACP 0x000000009CDA0F98 00010C (v05 LENOVO TC-03 00001110 AMI 00010013)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20170831/tbfadt-658)
[ 0.000000] ACPI: DSDT 0x000000009CD98198 008DFB (v02 LENOVO TC-03 00001110 INTL 20051117)
[ 0.000000] ACPI: FACS 0x000000009D745E80 000040
[ 0.000000] ACPI: APIC 0x000000009CDA10A8 00007E (v03 LENOVO TC-03 00001110 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x000000009CDA1128 000044 (v01 LENOVO TC-03 00001110 AMI 00010013)
[ 0.000000] ACPI: FIDT 0x000000009CDA1170 00009C (v01 LENOVO TC-03 00001110 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x000000009CDA1210 00003C (v01 LENOVO TC-03 00001110 MSFT 00010013)
[ 0.000000] ACPI: MSDM 0x000000009CDA1250 000055 (v03 LENOVO TC-03 00001110 AMI 00010013)
[ 0.000000] ACPI: HPET 0x000000009CDA12A8 000038 (v01 LENOVO TC-03 00001110 AMI 00000005)
[ 0.000000] ACPI: WDRT 0x000000009CDA12E0 000047 (v01 LENOVO TC-03 00001110 AMI 00000005)
[ 0.000000] ACPI: BGRT 0x000000009CDA1328 000038 (v00 LENOVO TC-03 00001110 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x000000009CDA1360 00043C (v01 LENOVO TC-03 00001110 AMD 00000001)
[ 0.000000] ACPI: SSDT 0x000000009CDA17A0 00487A (v02 LENOVO TC-03 00001110 MSFT 04000000)
[ 0.000000] ACPI: SSDT 0x000000009CDA6020 001207 (v01 LENOVO TC-03 00001110 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x13efd3000-0x13effdfff]
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000013effffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000009ccdafff]
[ 0.000000] node 0: [mem 0x000000009e55e000-0x000000009e55efff]
[ 0.000000] node 0: [mem 0x000000009e567000-0x000000009e6b9fff]
[ 0.000000] node 0: [mem 0x000000009ed2c000-0x000000009ed67fff]
[ 0.000000] node 0: [mem 0x000000009eff1000-0x000000009effffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000013effffff]
[ 0.000000] Reserved but unavailable: 99 pages
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013effffff]
[ 0.000000] On node 0 totalpages: 900631
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 9978 pages used for memmap
[ 0.000000] DMA32 zone: 638586 pages, LIFO batch:31
[ 0.000000] Normal zone: 4032 pages used for memmap
[ 0.000000] Normal zone: 258048 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 3, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] IOAPIC[1]: apic_id 4, version 33, address 0xfec01000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9ccdb000-0x9cd82fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9cd83000-0x9cda7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9cda8000-0x9d74efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9d74f000-0x9e55dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9e55f000-0x9e566fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9e6ba000-0x9ed2bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9ed68000-0x9eff0fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f000000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb01000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec01fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0x9f000000-0xfeafffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x99/0x4fd with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 45 pages/cpu s147456 r8192 d28672 u524288
[ 0.000000] pcpu-alloc: s147456 r8192 d28672 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 886536
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-99-generic root=UUID=c9f83715-8fd7-4df9-80dd-7a7cb668db83 ro quiet splash noresume vt.handoff=1
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3411432K/3602524K available (12300K kernel code, 2481K rwdata, 4268K rodata, 2432K init, 2712K bss, 191092K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 39364 entries in 154 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 524544, nr_irqs: 1000, preallocated irqs: 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] vt handoff: transparent VT on vt#1
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20170831
[ 0.000000] ACPI: 4 ACPI AML tables successfully acquired and loaded
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.020000] tsc: Fast TSC calibration using PIT
[ 0.024000] tsc: Detected 1347.430 MHz processor
[ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 2694.86 BogoMIPS (lpj=5389720)
[ 0.024000] pid_max: default: 32768 minimum: 301
[ 0.024000] Security Framework initialized
[ 0.024000] Yama: becoming mindful.
[ 0.024000] AppArmor: AppArmor initialized
[ 0.030719] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.032270] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.032396] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.032449] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.033094] BIOS may not properly restore RDRAND after suspend, hiding RDRAND via CPUID. Use rdrand=force to reenable.
[ 0.033127] LVT offset 1 assigned for vector 0xf9
[ 0.033137] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.033140] Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128, 1GB 0
[ 0.033144] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.033149] Spectre V2 : Mitigation: Full AMD retpoline
[ 0.033151] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.033155] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.033716] Freeing SMP alternatives memory: 36K
[ 0.150542] smpboot: CPU0: AMD E1-6010 APU with AMD Radeon R2 Graphics (family: 0x16, model: 0x30, stepping: 0x1)
[ 0.150853] Performance Events: AMD PMU driver.
[ 0.150864] ... version: 0
[ 0.150866] ... bit width: 48
[ 0.150867] ... generic registers: 4
[ 0.150869] ... value mask: 0000ffffffffffff
[ 0.150871] ... max period: 00007fffffffffff
[ 0.150872] ... fixed-purpose events: 0
[ 0.150873] ... event mask: 000000000000000f
[ 0.151003] Hierarchical SRCU implementation.
[ 0.152000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.152000] smp: Bringing up secondary CPUs ...
[ 0.152000] x86: Booting SMP configuration:
[ 0.152000] .... node #0, CPUs: #1
[ 0.152075] smp: Brought up 1 node, 2 CPUs
[ 0.152075] smpboot: Max logical packages: 2
[ 0.152075] smpboot: Total of 2 processors activated (5389.72 BogoMIPS)
[ 0.153312] devtmpfs: initialized
[ 0.153312] x86/mm: Memory block size: 128MB
[ 0.153379] evm: security.selinux
[ 0.153381] evm: security.SMACK64
[ 0.153382] evm: security.SMACK64EXEC
[ 0.153383] evm: security.SMACK64TRANSMUTE
[ 0.153385] evm: security.SMACK64MMAP
[ 0.153386] evm: security.apparmor
[ 0.153387] evm: security.ima
[ 0.153388] evm: security.capability
[ 0.156105] PM: Registering ACPI NVS region [mem 0x9cda8000-0x9d74efff] (10121216 bytes)
[ 0.156552] PM: Registering ACPI NVS region [mem 0x9e55f000-0x9e566fff] (32768 bytes)
[ 0.156708] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.156708] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.156708] pinctrl core: initialized pinctrl subsystem
[ 0.156708] RTC time: 10:35:18, date: 05/13/20
[ 0.156848] NET: Registered protocol family 16
[ 0.157136] audit: initializing netlink subsys (disabled)
[ 0.157163] audit: type=2000 audit(1589366118.156:1): state=initialized audit_enabled=0 res=1
[ 0.157163] cpuidle: using governor ladder
[ 0.157163] cpuidle: using governor menu
[ 0.157163] ACPI: bus type PCI registered
[ 0.157163] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.157163] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.157163] PCI: not using MMCONFIG
[ 0.157163] PCI: Using configuration type 1 for base access
[ 0.157163] PCI: Using configuration type 1 for extended access
[ 0.157163] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.157163] mtrr: probably your BIOS does not setup all CPUs.
[ 0.157163] mtrr: corrected configuration.
[ 0.162109] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.162109] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.164293] ACPI: Added _OSI(Module Device)
[ 0.164296] ACPI: Added _OSI(Processor Device)
[ 0.164298] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.164300] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.164302] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.164304] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.164307] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.164733] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.188480] ACPI: Interpreter enabled
[ 0.188549] ACPI: (supports S0 S3 S4 S5)
[ 0.188553] ACPI: Using IOAPIC for interrupt routing
[ 0.188669] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.188855] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.188895] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.189642] ACPI: Enabled 9 GPEs in block 00 to 1F
[ 0.215100] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.215120] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.216311] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.217508] PCI host bridge to bus 0000:00
[ 0.217514] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.217518] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.217522] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
[ 0.217525] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.217529] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.217532] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.217536] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window]
[ 0.217540] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.217560] pci 0000:00:00.0: [1022:1566] type 00 class 0x060000
[ 0.217846] pci 0000:00:01.0: [1002:9853] type 00 class 0x030000
[ 0.217879] pci 0000:00:01.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.217894] pci 0000:00:01.0: reg 0x18: [mem 0xd0000000-0xd07fffff 64bit pref]
[ 0.217904] pci 0000:00:01.0: reg 0x20: [io 0xf000-0xf0ff]
[ 0.217915] pci 0000:00:01.0: reg 0x24: [mem 0xfea00000-0xfea3ffff]
[ 0.217925] pci 0000:00:01.0: reg 0x30: [mem 0xfea40000-0xfea5ffff pref]
[ 0.217933] pci 0000:00:01.0: enabling Extended Tags
[ 0.218003] pci 0000:00:01.0: supports D1 D2
[ 0.218007] pci 0000:00:01.0: PME# supported from D1 D2 D3hot
[ 0.218233] pci 0000:00:01.1: [1002:9840] type 00 class 0x040300
[ 0.218261] pci 0000:00:01.1: reg 0x10: [mem 0xfea64000-0xfea67fff 64bit]
[ 0.218303] pci 0000:00:01.1: enabling Extended Tags
[ 0.218361] pci 0000:00:01.1: supports D1 D2
[ 0.218562] pci 0000:00:02.0: [1022:156b] type 00 class 0x060000
[ 0.218806] pci 0000:00:02.5: [1022:1439] type 01 class 0x060400
[ 0.218860] pci 0000:00:02.5: enabling Extended Tags
[ 0.218927] pci 0000:00:02.5: PME# supported from D0 D3hot D3cold
[ 0.219166] pci 0000:00:08.0: [1022:1537] type 00 class 0x108000
[ 0.219190] pci 0000:00:08.0: reg 0x10: [mem 0xd0900000-0xd091ffff 64bit pref]
[ 0.219199] pci 0000:00:08.0: reg 0x18: [mem 0xfe800000-0xfe8fffff]
[ 0.219208] pci 0000:00:08.0: reg 0x1c: [mem 0xfea6f000-0xfea6ffff]
[ 0.219223] pci 0000:00:08.0: reg 0x24: [mem 0xfea6a000-0xfea6bfff]
[ 0.219467] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
[ 0.219502] pci 0000:00:10.0: reg 0x10: [mem 0xfea68000-0xfea69fff 64bit]
[ 0.219631] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[ 0.219861] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
[ 0.219889] pci 0000:00:11.0: reg 0x10: [io 0xf140-0xf147]
[ 0.219900] pci 0000:00:11.0: reg 0x14: [io 0xf130-0xf133]
[ 0.219912] pci 0000:00:11.0: reg 0x18: [io 0xf120-0xf127]
[ 0.219923] pci 0000:00:11.0: reg 0x1c: [io 0xf110-0xf113]
[ 0.219935] pci 0000:00:11.0: reg 0x20: [io 0xf100-0xf10f]
[ 0.219947] pci 0000:00:11.0: reg 0x24: [mem 0xfea6e000-0xfea6e3ff]
[ 0.220022] pci 0000:00:11.0: PME# supported from D3hot
[ 0.220236] pci 0000:00:12.0: [1022:7808] type 00 class 0x0c0320
[ 0.220262] pci 0000:00:12.0: reg 0x10: [mem 0xfea6d000-0xfea6d0ff]
[ 0.220361] pci 0000:00:12.0: supports D1 D2
[ 0.220364] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.220573] pci 0000:00:13.0: [1022:7808] type 00 class 0x0c0320
[ 0.220599] pci 0000:00:13.0: reg 0x10: [mem 0xfea6c000-0xfea6c0ff]
[ 0.220697] pci 0000:00:13.0: supports D1 D2
[ 0.220700] pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.220914] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[ 0.221183] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[ 0.221213] pci 0000:00:14.2: reg 0x10: [mem 0xfea60000-0xfea63fff 64bit]
[ 0.221297] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.221500] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[ 0.221794] pci 0000:00:18.0: [1022:1580] type 00 class 0x060000
[ 0.222007] pci 0000:00:18.1: [1022:1581] type 00 class 0x060000
[ 0.222215] pci 0000:00:18.2: [1022:1582] type 00 class 0x060000
[ 0.222429] pci 0000:00:18.3: [1022:1583] type 00 class 0x060000
[ 0.222646] pci 0000:00:18.4: [1022:1584] type 00 class 0x060000
[ 0.222857] pci 0000:00:18.5: [1022:1585] type 00 class 0x060000
[ 0.223245] pci 0000:01:00.0: [10ec:8136] type 00 class 0x020000
[ 0.223289] pci 0000:01:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.223326] pci 0000:01:00.0: reg 0x18: [mem 0xfe900000-0xfe900fff 64bit]
[ 0.223352] pci 0000:01:00.0: reg 0x20: [mem 0xd0800000-0xd0803fff 64bit pref]
[ 0.223508] pci 0000:01:00.0: supports D1 D2
[ 0.223512] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.232106] pci 0000:00:02.5: PCI bridge to [bus 01]
[ 0.232118] pci 0000:00:02.5: bridge window [io 0xe000-0xefff]
[ 0.232124] pci 0000:00:02.5: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.232132] pci 0000:00:02.5: bridge window [mem 0xd0800000-0xd08fffff 64bit pref]
[ 0.234014] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *5 7 10 11 14 15)
[ 0.234265] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[ 0.234565] ACPI: PCI Interrupt Link [LNKC] (IRQs *4 5 7 10 11 14 15)
[ 0.234866] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 *11 14 15)
[ 0.235114] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 *11 14 15)
[ 0.235324] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 *10 11 14 15)
[ 0.235534] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[ 0.235744] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[ 0.237154] SCSI subsystem initialized
[ 0.237273] libata version 3.00 loaded.
[ 0.237273] pci 0000:00:01.0: vgaarb: setting as boot VGA device
[ 0.237273] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.237273] pci 0000:00:01.0: vgaarb: bridge control possible
[ 0.237273] vgaarb: loaded
[ 0.237273] ACPI: bus type USB registered
[ 0.237273] usbcore: registered new interface driver usbfs
[ 0.237273] usbcore: registered new interface driver hub
[ 0.237273] usbcore: registered new device driver usb
[ 0.237273] EDAC MC: Ver: 3.0.0
[ 0.237273] PCI: Using ACPI for IRQ routing
[ 0.246829] PCI: pci_cache_line_size set to 64 bytes
[ 0.246896] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.246900] e820: reserve RAM buffer [mem 0x9ccdb000-0x9fffffff]
[ 0.246903] e820: reserve RAM buffer [mem 0x9e55f000-0x9fffffff]
[ 0.246906] e820: reserve RAM buffer [mem 0x9e6ba000-0x9fffffff]
[ 0.246908] e820: reserve RAM buffer [mem 0x9ed68000-0x9fffffff]
[ 0.246911] e820: reserve RAM buffer [mem 0x9f000000-0x9fffffff]
[ 0.246913] e820: reserve RAM buffer [mem 0x13f000000-0x13fffffff]
[ 0.247173] NetLabel: Initializing
[ 0.247175] NetLabel: domain hash size = 128
[ 0.247177] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.247219] NetLabel: unlabeled traffic allowed by default
[ 0.247266] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.247266] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.249081] clocksource: Switched to clocksource hpet
[ 0.280867] VFS: Disk quotas dquot_6.6.0
[ 0.280912] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.281190] AppArmor: AppArmor Filesystem Enabled
[ 0.281262] pnp: PnP ACPI init
[ 0.281689] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.281703] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.281941] system 00:01: [mem 0xa0000000-0xbfffffff] has been reserved
[ 0.281951] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.282755] system 00:02: [io 0x0a00-0x0a0f] has been reserved
[ 0.282759] system 00:02: [io 0x0a10-0x0a1f] has been reserved
[ 0.282763] system 00:02: [io 0x0a20-0x0a2f] has been reserved
[ 0.282766] system 00:02: [io 0x0a30-0x0a3f] has been reserved
[ 0.282778] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.283487] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.283636] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.284051] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.284057] system 00:05: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.284068] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.285140] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.285149] system 00:06: [io 0x040b] has been reserved
[ 0.285152] system 00:06: [io 0x04d6] has been reserved
[ 0.285156] system 00:06: [io 0x0c00-0x0c01] has been reserved
[ 0.285160] system 00:06: [io 0x0c14] has been reserved
[ 0.285163] system 00:06: [io 0x0c50-0x0c51] has been reserved
[ 0.285167] system 00:06: [io 0x0c52] has been reserved
[ 0.285170] system 00:06: [io 0x0c6c] has been reserved
[ 0.285174] system 00:06: [io 0x0c6f] has been reserved
[ 0.285177] system 00:06: [io 0x0cd0-0x0cd1] has been reserved
[ 0.285181] system 00:06: [io 0x0cd2-0x0cd3] has been reserved
[ 0.285184] system 00:06: [io 0x0cd4-0x0cd5] has been reserved
[ 0.285188] system 00:06: [io 0x0cd6-0x0cd7] has been reserved
[ 0.285191] system 00:06: [io 0x0cd8-0x0cdf] has been reserved
[ 0.285195] system 00:06: [io 0x0800-0x089f] has been reserved
[ 0.285198] system 00:06: [io 0x0b20-0x0b3f] has been reserved
[ 0.285202] system 00:06: [io 0x0900-0x090f] has been reserved
[ 0.285205] system 00:06: [io 0x0910-0x091f] has been reserved
[ 0.285210] system 00:06: [io 0xfe00-0xfefe] has been reserved
[ 0.285215] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.285219] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.285224] system 00:06: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.285228] system 00:06: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.285232] system 00:06: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.285236] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[ 0.285248] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.286135] pnp: PnP ACPI: found 7 devices
[ 0.295915] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.295958] pci 0000:00:02.5: PCI bridge to [bus 01]
[ 0.295964] pci 0000:00:02.5: bridge window [io 0xe000-0xefff]
[ 0.295971] pci 0000:00:02.5: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.295976] pci 0000:00:02.5: bridge window [mem 0xd0800000-0xd08fffff 64bit pref]
[ 0.295989] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 0.295993] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.295996] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
[ 0.295999] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.296021] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.296024] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.296028] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff window]
[ 0.296031] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.296034] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 0.296037] pci_bus 0000:01: resource 2 [mem 0xd0800000-0xd08fffff 64bit pref]
[ 0.296255] NET: Registered protocol family 2
[ 0.296643] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.296845] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.297020] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.297137] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.297179] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.297332] NET: Registered protocol family 1
[ 0.297372] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.320505] pci 0000:00:12.0: PME# does not work under D3, disabling it
[ 0.340506] pci 0000:00:13.0: PME# does not work under D3, disabling it
[ 0.340559] PCI: CLS 64 bytes, default 64
[ 0.340691] Unpacking initramfs...
[ 1.678856] Freeing initrd memory: 38476K
[ 1.678904] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.678908] software IO TLB: mapped [mem 0x98cdb000-0x9ccdb000] (64MB)
[ 1.679042] amd_uncore: AMD NB counters detected
[ 1.679049] amd_uncore: AMD LLC counters detected
[ 1.679224] LVT offset 0 assigned for vector 0x400
[ 1.679350] perf: AMD IBS detected (0x000000ff)
[ 1.679478] Scanning for low memory corruption every 60 seconds
[ 1.681179] Initialise system trusted keyrings
[ 1.681200] Key type blacklist registered
[ 1.681325] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[ 1.684699] zbud: loaded
[ 1.685903] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.686345] fuse init (API version 7.26)
[ 1.690451] Key type asymmetric registered
[ 1.690455] Asymmetric key parser 'x509' registered
[ 1.690588] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 1.690689] io scheduler noop registered
[ 1.690692] io scheduler deadline registered
[ 1.690764] io scheduler cfq registered (default)
[ 1.691555] pcieport 0000:00:02.5: Signaling PME with IRQ 25
[ 1.691746] vesafb: mode is 1680x1050x32, linelength=6912, pages=0
[ 1.691748] vesafb: scrolling: redraw
[ 1.691751] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 1.691781] vesafb: framebuffer at 0xc0000000, mapped to 0x (ptrval), using 7104k, total 7104k
[ 1.692131] Console: switching to colour frame buffer device 210x65
[ 1.692222] fb0: VESA VGA frame buffer device
[ 1.692451] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.692530] ACPI: Power Button [PWRB]
[ 1.692633] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.692675] ACPI: Power Button [PWRF]
[ 1.693608] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.699274] Linux agpgart interface v0.103
[ 1.703402] loop: module loaded
[ 1.703909] libphy: Fixed MDIO Bus: probed
[ 1.703911] tun: Universal TUN/TAP device driver, 1.6
[ 1.704072] PPP generic driver version 2.4.2
[ 1.704204] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.704210] ehci-pci: EHCI PCI platform driver
[ 1.704561] ehci-pci 0000:00:12.0: EHCI Host Controller
[ 1.704580] ehci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1
[ 1.704590] ehci-pci 0000:00:12.0: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.704603] ehci-pci 0000:00:12.0: debug port 2
[ 1.704682] ehci-pci 0000:00:12.0: irq 18, io mem 0xfea6d000
[ 1.720244] ehci-pci 0000:00:12.0: USB 2.0 started, EHCI 1.00
[ 1.720388] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.720392] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.720396] usb usb1: Product: EHCI Host Controller
[ 1.720399] usb usb1: Manufacturer: Linux 4.15.0-99-generic ehci_hcd
[ 1.720401] usb usb1: SerialNumber: 0000:00:12.0
[ 1.720800] hub 1-0:1.0: USB hub found
[ 1.720818] hub 1-0:1.0: 2 ports detected
[ 1.721355] ehci-pci 0000:00:13.0: EHCI Host Controller
[ 1.721368] ehci-pci 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 1.721376] ehci-pci 0000:00:13.0: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.721388] ehci-pci 0000:00:13.0: debug port 2
[ 1.721442] ehci-pci 0000:00:13.0: irq 18, io mem 0xfea6c000
[ 1.736232] ehci-pci 0000:00:13.0: USB 2.0 started, EHCI 1.00
[ 1.736399] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.736404] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.736407] usb usb2: Product: EHCI Host Controller
[ 1.736410] usb usb2: Manufacturer: Linux 4.15.0-99-generic ehci_hcd
[ 1.736412] usb usb2: SerialNumber: 0000:00:13.0
[ 1.736819] hub 2-0:1.0: USB hub found
[ 1.736837] hub 2-0:1.0: 2 ports detected
[ 1.737296] ehci-platform: EHCI generic platform driver
[ 1.737331] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.737338] ohci-pci: OHCI PCI platform driver
[ 1.737371] ohci-platform: OHCI generic platform driver
[ 1.737388] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.737667] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.737680] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
[ 1.737895] xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x0000000000000410
[ 1.738276] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.738280] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.738283] usb usb3: Product: xHCI Host Controller
[ 1.738286] usb usb3: Manufacturer: Linux 4.15.0-99-generic xhci-hcd
[ 1.738289] usb usb3: SerialNumber: 0000:00:10.0
[ 1.738564] hub 3-0:1.0: USB hub found
[ 1.738583] hub 3-0:1.0: 2 ports detected
[ 1.738798] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.738807] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 4
[ 1.738814] xhci_hcd 0000:00:10.0: Host supports USB 3.0 SuperSpeed
[ 1.741289] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.741347] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.741350] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.741353] usb usb4: Product: xHCI Host Controller
[ 1.741356] usb usb4: Manufacturer: Linux 4.15.0-99-generic xhci-hcd
[ 1.741358] usb usb4: SerialNumber: 0000:00:10.0
[ 1.741605] hub 4-0:1.0: USB hub found
[ 1.741623] hub 4-0:1.0: 2 ports detected
[ 1.741927] i8042: PNP: No PS/2 controller found.
[ 1.742148] mousedev: PS/2 mouse device common for all mice
[ 1.742478] rtc_cmos 00:04: RTC can wake from S4
[ 1.742654] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.742692] rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.742708] i2c /dev entries driver
[ 1.742843] device-mapper: uevent: version 1.0.3
[ 1.743010] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 1.743069] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.743506] x86/pm: family 0x16 cpu detected, MSR saving is needed during suspending.
[ 1.743999] NET: Registered protocol family 10
[ 1.755777] Segment Routing with IPv6
[ 1.755840] NET: Registered protocol family 17
[ 1.755958] Key type dns_resolver registered
[ 1.756430] mce: Using 6 MCE banks
[ 1.756474] RAS: Correctable Errors collector initialized.
[ 1.756556] microcode: CPU0: patch_level=0x07030105
[ 1.756572] microcode: CPU1: patch_level=0x07030105
[ 1.756679] microcode: Microcode Update Driver: v2.2.
[ 1.756702] sched_clock: Marking stable (1756666883, 0)->(1737315655, 19351228)
[ 1.757141] registered taskstats version 1
[ 1.757163] Loading compiled-in X.509 certificates
[ 1.765146] Loaded X.509 cert 'Build time autogenerated kernel key: 7480108fe56bba9284001dfb9078560125be4684'
[ 1.765212] zswap: loaded using pool lzo/zbud
[ 1.776196] Key type big_key registered
[ 1.776210] Key type trusted registered
[ 1.781545] Key type encrypted registered
[ 1.781557] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.781563] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 1.781580] ima: Allocated hash algorithm: sha1
[ 1.781636] evm: HMAC attrs: 0x1
[ 1.782116] Magic number: 4:60:578
[ 1.782185] platform pcspkr: hash matches
[ 1.782355] rtc_cmos 00:04: setting system clock to 2020-05-13 10:35:20 UTC (1589366120)
[ 1.782702] acpi_cpufreq: overriding BIOS provided _PSD data
[ 1.782876] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.782878] EDD information not available.
[ 1.791490] Freeing unused kernel image memory: 2432K
[ 1.812266] Write protecting the kernel read-only data: 20480k
[ 1.813877] Freeing unused kernel image memory: 2008K
[ 1.814917] Freeing unused kernel image memory: 1876K
[ 1.841516] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 2.056175] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 2.088462] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 2.088499] usb 3-2: new high-speed USB device number 2 using xhci_hcd
[ 2.126862] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.127163] ahci 0000:00:11.0: version 3.0
[ 2.127492] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 2.127498] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 2.127730] r8169 0000:01:00.0 eth0: RTL8105e at 0x (ptrval), d8:cb:8a:09:10:6f, XID 00c00000 IRQ 30
[ 2.144098] scsi host0: ahci
[ 2.145210] scsi host1: ahci
[ 2.145359] ata1: SATA max UDMA/133 abar m1024@0xfea6e000 port 0xfea6e100 irq 31
[ 2.145363] ata2: SATA max UDMA/133 abar m1024@0xfea6e000 port 0xfea6e180 irq 31
[ 2.145529] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 2.145532] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[ 2.146148] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 2.214471] usb 1-1: New USB device found, idVendor=0438, idProduct=7900
[ 2.214477] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.215805] hub 1-1:1.0: USB hub found
[ 2.215959] hub 1-1:1.0: 4 ports detected
[ 2.244426] usb 2-1: New USB device found, idVendor=0438, idProduct=7900
[ 2.244432] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.244875] hub 2-1:1.0: USB hub found
[ 2.245042] hub 2-1:1.0: 4 ports detected
[ 2.255554] usb 3-2: New USB device found, idVendor=0846, idProduct=9030
[ 2.255560] usb 3-2: New USB device strings: Mfr=16, Product=32, SerialNumber=48
[ 2.255563] usb 3-2: Product: WNA1100
[ 2.255566] usb 3-2: Manufacturer: NETGEAR WNA
[ 2.255569] usb 3-2: SerialNumber: 12345
[ 2.284630] r8169 0000:01:00.0 enp1s0: renamed from eth0
[ 2.504267] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[ 2.532124] usb 2-1.3: new low-speed USB device number 3 using ehci-pci
[ 2.620145] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.621300] ata1.00: ATA-8: WDC WD5000AAKX-08U6AA0, 19.01H19, max UDMA/100
[ 2.621304] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.622496] ata1.00: configured for UDMA/100
[ 2.622946] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKX-0 1H19 PQ: 0 ANSI: 5
[ 2.623650] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 2.623687] sd 0:0:0:0: [sda] Write Protect is off
[ 2.623692] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.623747] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.623767] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.624082] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.627274] ata2.00: ATAPI: PLDS DVD-RW DH16AESH, 3L31, max UDMA/100
[ 2.628177] ata2.00: configured for UDMA/100
[ 2.630764] usb 1-1.1: New USB device found, idVendor=0a12, idProduct=0001
[ 2.630771] usb 1-1.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 2.630774] usb 1-1.1: Product: CSR8510 A10
[ 2.630793] scsi 1:0:0:0: CD-ROM PLDS DVD-RW DH16AESH 3L31 PQ: 0 ANSI: 5
[ 2.644653] usb 2-1.3: New USB device found, idVendor=17ef, idProduct=602e
[ 2.644659] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.644663] usb 2-1.3: Product: USB Optical Mouse
[ 2.644665] usb 2-1.3: Manufacturer: PixArt
[ 2.649982] sda: sda1 sda2 < sda5 sda6 >
[ 2.651022] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.655425] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.663191] usbcore: registered new interface driver usbhid
[ 2.663195] usbhid: USB HID core driver
[ 2.669475] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1.3/2-1.3:1.0/0003:17EF:602E.0001/input/input2
[ 2.669770] hid-generic 0003:17EF:602E.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:13.0-1.3/input0
[ 2.688090] tsc: Refined TSC clocksource calibration: 1347.472 MHz
[ 2.688102] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x136c4b05b98, max_idle_ns: 440795211443 ns
[ 2.690029] sr 1:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.690036] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.690403] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.690570] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.712283] usb 1-1.3: new high-speed USB device number 4 using ehci-pci
[ 2.724126] usb 2-1.4: new low-speed USB device number 4 using ehci-pci
[ 2.805080] random: fast init done
[ 2.807383] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.807409] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.807469] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.833144] usb 1-1.3: New USB device found, idVendor=05e3, idProduct=0722
[ 2.833150] usb 1-1.3: New USB device strings: Mfr=3, Product=4, SerialNumber=2
[ 2.833153] usb 1-1.3: Product: USB Storage
[ 2.833156] usb 1-1.3: Manufacturer: Generic
[ 2.833159] usb 1-1.3: SerialNumber: 000000009843
[ 2.843758] usb-storage 1-1.3:1.0: USB Mass Storage device detected
[ 2.844547] scsi host2: usb-storage 1-1.3:1.0
[ 2.844757] usbcore: registered new interface driver usb-storage
[ 2.846231] usb 2-1.4: New USB device found, idVendor=046d, idProduct=c31c
[ 2.846237] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.846240] usb 2-1.4: Product: USB Keyboard
[ 2.846243] usb 2-1.4: Manufacturer: Logitech
[ 2.849415] usbcore: registered new interface driver uas
[ 2.853162] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1.4/2-1.4:1.0/0003:046D:C31C.0002/input/input3
[ 2.912544] hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:13.0-1.4/input0
[ 2.919497] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1.4/2-1.4:1.1/0003:046D:C31C.0003/input/input4
[ 2.976643] hid-generic 0003:046D:C31C.0003: input,hidraw2: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:13.0-1.4/input1
[ 3.278832] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.712444] clocksource: Switched to clocksource tsc
[ 3.874199] scsi 2:0:0:0: Direct-Access Generic STORAGE DEVICE 9843 PQ: 0 ANSI: 5
[ 3.874854] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 3.879989] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 4.772403] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 4.871257] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 4.888546] systemd[1]: Detected architecture x86-64.
[ 4.903041] systemd[1]: Set hostname to <debian-Lenovo-H30-05>.
[ 5.246695] random: crng init done
[ 5.246701] random: 7 urandom warning(s) missed due to ratelimiting
[ 7.985323] systemd[1]: Created slice System Slice.
[ 7.985867] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 7.986026] systemd[1]: Listening on udev Kernel Socket.
[ 7.986273] systemd[1]: Listening on Journal Socket.
[ 7.988406] systemd[1]: Mounting Huge Pages File System...
[ 7.990820] systemd[1]: Mounting POSIX Message Queue File System...
[ 7.991140] systemd[1]: Started ntp-systemd-netif.path.
[ 8.281524] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 8.591773] lp: driver loaded but no devices found
[ 8.703910] ppdev: user-space parallel port driver
[ 8.805944] systemd-journald[231]: Received request to flush runtime journal from PID 1
[ 9.047241] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 9.053922] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 9.256447] usb 3-2: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested
[ 9.256574] usbcore: registered new interface driver ath9k_htc
[ 9.461717] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 9.806780] it87: Found IT8728F chip at 0xa10, revision 0
[ 9.806801] it87: Beeping is supported
[ 9.859847] usb 3-2: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008
[ 10.110201] ath9k_htc 3-2:1.0: ath9k_htc: HTC initialized with 33 credits
[ 10.343247] ath9k_htc 3-2:1.0: ath9k_htc: FW Version: 1.4
[ 10.343253] ath9k_htc 3-2:1.0: FW RMW support: On
[ 10.343256] ath: EEPROM regdomain: 0x60
[ 10.343257] ath: EEPROM indicates we should expect a direct regpair map
[ 10.343261] ath: Country alpha2 being used: 00
[ 10.343262] ath: Regpair used: 0x60
[ 10.698700] ieee80211 phy0: Atheros AR9271 Rev:1
[ 21.030443] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 21.469194] ccp 0000:00:08.0: 4 command queues available
[ 21.495812] ccp 0000:00:08.0: ccp enabled
[ 21.495818] ccp 0000:00:08.0: enabled
[ 21.503846] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 21.813377] [drm] radeon kernel modesetting enabled.
[ 21.813463] checking generic (c0000000 6f0000) vs hw (c0000000 10000000)
[ 21.813465] fb: switching to radeondrmfb from VESA VGA
[ 21.813582] Console: switching to colour dummy device 80x25
[ 21.817483] [drm] initializing kernel modesetting (MULLINS 0x1002:0x9853 0x17AA:0x369A 0x00).
[ 21.817578] [drm] doorbell mmio base: 0xD0000000
[ 21.817580] [drm] doorbell mmio size: 8388608
[ 21.817670] ATOM BIOS: AMD
[ 21.817796] radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 21.817801] radeon 0000:00:01.0: GTT: 2048M 0x0000000020000000 - 0x000000009FFFFFFF
[ 21.817809] [drm] Detected VRAM RAM=512M, BAR=256M
[ 21.817810] [drm] RAM width 128bits DDR
[ 21.820331] [TTM] Zone kernel: Available graphics memory: 1728130 kiB
[ 21.820335] [TTM] Initializing pool allocator
[ 21.820347] [TTM] Initializing DMA pool allocator
[ 21.820399] Bluetooth: Core ver 2.22
[ 21.820401] [drm] radeon: 512M of VRAM memory ready
[ 21.820404] [drm] radeon: 2048M of GTT memory ready.
[ 21.820429] [drm] Loading mullins Microcode
[ 21.820437] NET: Registered protocol family 31
[ 21.820439] Bluetooth: HCI device and connection manager initialized
[ 21.820448] Bluetooth: HCI socket layer initialized
[ 21.820453] Bluetooth: L2CAP socket layer initialized
[ 21.820466] Bluetooth: SCO socket layer initialized
[ 21.882435] [drm] Internal thermal controller without fan control
[ 21.883833] [drm] radeon: dpm initialized
[ 21.899428] usbcore: registered new interface driver btusb
[ 21.932784] [drm] Found UVD firmware Version: 1.64 Family ID: 9
[ 21.955794] [drm] Found VCE firmware/feedback version 40.2.2 / 15!
[ 21.955852] [drm] GART: num cpu pages 524288, num gpu pages 524288
[ 22.031555] [drm] PCIE GART of 2048M enabled (table at 0x000000000030E000).
[ 22.031837] radeon 0000:00:01.0: WB enabled
[ 22.031867] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0x000000001583eacf
[ 22.031872] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000020000c04 and cpu addr 0x000000009924e1d6
[ 22.031876] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000020000c08 and cpu addr 0x00000000f8a61afa
[ 22.031879] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0x00000000949a3a86
[ 22.031883] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000020000c10 and cpu addr 0x00000000905bd34c
[ 22.032836] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000078d30 and cpu addr 0x00000000836c8ffc
[ 22.033202] radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000020000c18 and cpu addr 0x0000000004237188
[ 22.033207] radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000020000c1c and cpu addr 0x0000000028526610
[ 22.033212] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 22.033213] [drm] Driver supports precise vblank timestamp query.
[ 22.033311] radeon 0000:00:01.0: radeon: using MSI.
[ 22.033360] [drm] radeon: irq initialized.
[ 22.042119] [drm] ring test on 0 succeeded in 2 usecs
[ 22.042253] [drm] ring test on 1 succeeded in 2 usecs
[ 22.042278] [drm] ring test on 2 succeeded in 2 usecs
[ 22.042537] [drm] ring test on 3 succeeded in 4 usecs
[ 22.042548] [drm] ring test on 4 succeeded in 4 usecs
[ 22.068469] [drm] ring test on 5 succeeded in 1 usecs
[ 22.068502] [drm] UVD initialized successfully.
[ 22.177991] [drm] ring test on 6 succeeded in 12 usecs
[ 22.178004] [drm] ring test on 7 succeeded in 2 usecs
[ 22.178005] [drm] VCE initialized successfully.
[ 22.180869] [drm] ib test on ring 0 succeeded in 0 usecs
[ 22.315390] AVX version of gcm_enc/dec engaged.
[ 22.315394] AES CTR mode by8 optimization enabled
[ 22.549838] kvm: Nested Virtualization enabled
[ 22.549844] kvm: Nested Paging enabled
[ 22.572608] MCE: In-kernel MCE decoding enabled.
[ 22.585704] EDAC amd64: Node 0: DRAM ECC disabled.
[ 22.585709] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 22.609204] EDAC amd64: Node 0: DRAM ECC disabled.
[ 22.609209] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 22.688121] [drm] ib test on ring 1 succeeded in 0 usecs
[ 22.688183] [drm] ib test on ring 2 succeeded in 0 usecs
[ 22.688247] [drm] ib test on ring 3 succeeded in 0 usecs
[ 22.688305] [drm] ib test on ring 4 succeeded in 0 usecs
[ 22.884166] ath9k_htc 3-2:1.0 wlx9cd36df98132: renamed from wlan0
[ 23.200287] [drm] ib test on ring 5 succeeded
[ 23.200869] [drm] ib test on ring 6 succeeded
[ 23.201312] [drm] ib test on ring 7 succeeded
[ 23.202804] [drm] Radeon Display Connectors
[ 23.202808] [drm] Connector 0:
[ 23.202809] [drm] HDMI-A-1
[ 23.202810] [drm] HPD1
[ 23.202814] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[ 23.202815] [drm] Encoders:
[ 23.202816] [drm] DFP1: INTERNAL_UNIPHY
[ 23.202818] [drm] Connector 1:
[ 23.202819] [drm] VGA-1
[ 23.202822] [drm] DDC: 0x65c0 0x65c0 0x65c4 0x65c4 0x65c8 0x65c8 0x65cc 0x65cc
[ 23.202823] [drm] Encoders:
[ 23.202825] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 23.257309] [drm] fb mappable at 0xC0722000
[ 23.257313] [drm] vram apper at 0xC0000000
[ 23.257314] [drm] size 7299072
[ 23.257316] [drm] fb depth is 24
[ 23.257317] [drm] pitch is 6912
[ 23.257554] fbcon: radeondrmfb (fb0) is primary device
[ 23.257830] Console: switching to colour frame buffer device 210x65
[ 23.257926] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[ 23.276246] [drm] Initialized radeon 2.50.0 20080528 for 0000:00:01.0 on minor 0
[ 23.277430] snd_hda_intel 0000:00:01.1: Force to non-snoop mode
[ 23.317394] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input5
[ 23.321193] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC662 rev3: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 23.321200] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 23.321204] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 23.321207] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 23.321209] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 23.321213] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
[ 23.321217] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
[ 23.321220] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
[ 23.343601] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input6
[ 23.344122] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input7
[ 23.344384] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input8
[ 23.344551] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
[ 23.344703] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
[ 23.691322] [drm] amdgpu kernel modesetting enabled.
[ 26.241334] Adding 3600380k swap on /dev/sda5. Priority:-2 extents:1 across:3600380k FS
[ 26.393655] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 26.658360] audit: type=1400 audit(1589366145.370:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=731 comm="apparmor_parser"
[ 26.658372] audit: type=1400 audit(1589366145.370:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=731 comm="apparmor_parser"
[ 26.658378] audit: type=1400 audit(1589366145.370:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=731 comm="apparmor_parser"
[ 26.658384] audit: type=1400 audit(1589366145.370:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=731 comm="apparmor_parser"
[ 26.662810] audit: type=1400 audit(1589366145.374:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=730 comm="apparmor_parser"
[ 26.662821] audit: type=1400 audit(1589366145.374:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=730 comm="apparmor_parser"
[ 26.669189] audit: type=1400 audit(1589366145.382:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=734 comm="apparmor_parser"
[ 26.669200] audit: type=1400 audit(1589366145.382:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=734 comm="apparmor_parser"
[ 26.669205] audit: type=1400 audit(1589366145.382:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=734 comm="apparmor_parser"
[ 26.679191] audit: type=1400 audit(1589366145.390:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=735 comm="apparmor_parser"
[ 27.302178] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 27.302183] Bluetooth: BNEP filters: protocol multicast
[ 27.302193] Bluetooth: BNEP socket layer initialized
[ 29.978044] Bluetooth: RFCOMM TTY layer initialized
[ 29.978058] Bluetooth: RFCOMM socket layer initialized
[ 29.978071] Bluetooth: RFCOMM ver 1.11
[ 31.050444] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[ 31.329893] r8169 0000:01:00.0 enp1s0: link down
[ 31.330376] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[ 31.376423] IPv6: ADDRCONF(NETDEV_UP): wlx9cd36df98132: link is not ready
[ 31.546460] IPv6: ADDRCONF(NETDEV_UP): wlx9cd36df98132: link is not ready
[ 31.958661] IPv6: ADDRCONF(NETDEV_UP): wlx9cd36df98132: link is not ready
[ 33.923827] wlx9cd36df98132: authenticate with d8:d7:75:d6:f3:50
[ 34.048557] wlx9cd36df98132: send auth to d8:d7:75:d6:f3:50 (try 1/3)
[ 34.051322] wlx9cd36df98132: authenticated
[ 34.064135] wlx9cd36df98132: associate with d8:d7:75:d6:f3:50 (try 1/3)
[ 34.082829] wlx9cd36df98132: RX AssocResp from d8:d7:75:d6:f3:50 (capab=0x411 status=0 aid=2)
[ 34.088720] wlx9cd36df98132: associated
[ 35.122402] IPv6: ADDRCONF(NETDEV_CHANGE): wlx9cd36df98132: link becomes ready
[ 47.796118] kauditd_printk_skb: 32 callbacks suppressed
[ 47.796122] audit: type=1400 audit(1589366166.506:44): apparmor="DENIED" operation="mknod" profile="/usr/bin/evince-thumbnailer" name="/home/greg/.thumbnails/normal/60961539077f35e94bd93055109940bc.png" pid=1552 comm="evince-thumbnai" requested_mask="c" denied_mask="c" fsuid=1000 ouid=1000
[ 48.009906] audit: type=1400 audit(1589366166.722:45): apparmor="DENIED" operation="mknod" profile="/usr/bin/evince-thumbnailer" name="/home/greg/.thumbnails/normal/44f22384d9f7300ee9c9af26f4322e30.png" pid=1556 comm="evince-thumbnai" requested_mask="c" denied_mask="c" fsuid=1000 ouid=1000
[ 48.271961] audit: type=1400 audit(1589366166.982:46): apparmor="DENIED" operation="mknod" profile="/usr/bin/evince-thumbnailer" name="/home/greg/.thumbnails/normal/a4f67b210d0d19c87d404689264d47c2.png" pid=1560 comm="evince-thumbnai" requested_mask="c" denied_mask="c" fsuid=1000 ouid=1000
[ 48.463004] audit: type=1400 audit(1589366167.174:47): apparmor="DENIED" operation="mknod" profile="/usr/bin/evince-thumbnailer" name="/home/greg/.thumbnails/normal/91c7a917b7b2d7ae754948870848e814.png" pid=1565 comm="evince-thumbnai" requested_mask="c" denied_mask="c" fsuid=1000 ouid=1000
[ 48.670680] audit: type=1400 audit(1589366167.382:48): apparmor="DENIED" operation="mknod" profile="/usr/bin/evince-thumbnailer" name="/home/greg/.thumbnails/normal/c479aac6521ee74692885fa654f8d815.png" pid=1570 comm="evince-thumbnai" requested_mask="c" denied_mask="c" fsuid=1000 ouid=1000
[ 89.578130] [UFW BLOCK] IN=wlx9cd36df98132 OUT= MAC=01:00:5e:00:00:01:d8:d7:75:d6:f3:5c:08:00 SRC=192.168.1.254 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 214.611248] [UFW BLOCK] IN=wlx9cd36df98132 OUT= MAC=01:00:5e:00:00:01:d8:d7:75:d6:f3:5c:08:00 SRC=192.168.1.254 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 339.542739] [UFW BLOCK] IN=wlx9cd36df98132 OUT= MAC=01:00:5e:00:00:01:d8:d7:75:d6:f3:5c:08:00 SRC=192.168.1.254 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 464.576334] [UFW BLOCK] IN=wlx9cd36df98132 OUT= MAC=01:00:5e:00:00:01:d8:d7:75:d6:f3:5c:08:00 SRC=192.168.1.254 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[ 589.610796] [UFW BLOCK] IN=wlx9cd36df98132 OUT= MAC=01:00:5e:00:00:01:d8:d7:75:d6:f3:5c:08:00 SRC=192.168.1.254 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF PROTO=2 Hors ligne
#9 Le 13/05/2020, à 12:53
- dragut
Re : sélectionner toutes les lignes du terminal
et le résultat de systemd-analyze critical-chain (si ça peut aider)
The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.
graphical.target @33.572s
└─multi-user.target @33.572s
└─hddtemp.service @33.515s +55ms
└─network-online.target @33.512s
└─NetworkManager-wait-online.service @25.811s +7.699s
└─NetworkManager.service @22.839s +2.954s
└─dbus.service @22.585s
└─basic.target @22.538s
└─sockets.target @22.538s
└─snapd.socket @22.518s +17ms
└─sysinit.target @22.511s
└─apparmor.service @21.987s +521ms
└─local-fs.target @21.980s
└─run-user-1000-gvfs.mount @31.711s
└─run-user-1000.mount @29.233s
└─swap.target @21.837s
└─dev-disk-by\x2duuid-bed235ba\x2d9a0f\x2d4819\x2d
└─dev-disk-by\x2duuid-bed235ba\x2d9a0f\x2d4819\xMerci pour vos réponses!
Dragut
Hors ligne
#10 Le 13/05/2020, à 13:01
- diesel
Re : sélectionner toutes les lignes du terminal
MicP a écrit :
Ou, peut-être, suivant l'émulateur de terminal, Ctrl+Maj+a
Dans Tilix (l'émulateur de terminal de ubuntu-budgie), ctrl-maj-A pour sélectionner tout ce qu'il y a dans le terminal fonctionne.
Amicalement.
Jean-Marie
Dernière modification par diesel (Le 13/05/2020, à 13:01)
Je déteste qu'on cherche à me faire passer pour un con, j'y arrive déjà très bien tout seul.
Le mort, il sait pas qu'il est mort ; c'est pour les autres que c'est dur.................... Pour les cons, c'est pareil.
Hors ligne
#11 Le 13/05/2020, à 13:15
- Watael
Re : sélectionner toutes les lignes du terminal
@dragut : je crois que tu t'es trompé de discussion.
@diesel : sans aller dans "l'exotique", par défaut, une simple redirection :
{ commande1; commande2; commandeN+1;} > fichierou en "mode visualisation" avec less :
{ commande1; commande2; commandeN+1;} | lesset dans less, si on veux enregistrer le résultat, appuyer sur s pour indiquer le log file (un fichier quelconque) dans le quel enregistrer les données.
Attention, ça n'ajoutera pas les données à un fichier existant, ça l'écrasera ! 
Connected \o/
Welcome to sHell. · eval is evil.
Hors ligne
#12 Le 13/05/2020, à 17:29
- diesel
Re : sélectionner toutes les lignes du terminal
Certes...,
Mais il faut y penser avant.
Alors que ; tu es en train de passer des commandes (par exemple dans le cadre de la résolution d'un problème) et au bout d'un moment, tu te dis que ce serait utile de les poster sur le forum pour demander un avis. A ce moment, un ctrl-maj-A te permet de les copier/coller entre deux balises code et le tour est joué.
Amicalement.
Jean-Marie
Je déteste qu'on cherche à me faire passer pour un con, j'y arrive déjà très bien tout seul.
Le mort, il sait pas qu'il est mort ; c'est pour les autres que c'est dur.................... Pour les cons, c'est pareil.
Hors ligne
#13 Le 13/05/2020, à 18:32
- Watael
Re : sélectionner toutes les lignes du terminal
mais, il faut aussi penser à installer tilix avant. 
Connected \o/
Welcome to sHell. · eval is evil.
Hors ligne