#1 Le 30/01/2017, à 01:41
- Adarien
[RESOLU] Ecran à moitié noir après connexion HDMI
Bonsoir bonsoir,
Je précise que j'ai bien cherché avant de poster, sans rien trouver...
J'ai connecté mon PC sur un écran externe en HDMI. Tout s'est bien passé jusqu'à ce que je débranche et redémarre mon PC. Depuis, si l'écran externe est connecté tout fonctionne, mais si je débranche le câble la moitié basse de l'écran est toute noire. La barre des taches n'est pas décalée vers le haut, elle est invisible. Ce problème d'affichage commence juste après que je me sois connecté à ma session, avant qu'elle ne s'ouvre.
J'ai réinitialisé les paramètres de configuration du "système/matériel/affichage et surveillance", redémarré le serveur graphique (alt+syst+K), reconfiguré Xorg et XRandR, rien n'y fait...
- ma config :
kubuntu 16.04
Asus R11L
Carte graphique : GM108M [GeForce 930M]
- Xorg.conf
Section "ServerLayout"
Identifier "layout"
Screen 0 "nvidia"
Inactive "intel"
EndSection
Section "Device"
Identifier "intel"
Driver "modesetting"
BusID "PCI:0@0:2:0"
Option "AccelMethod" "None"
EndSection
Section "Screen"
Identifier "intel"
Device "intel"
EndSection
Section "Device"
Identifier "nvidia"
Driver "nvidia"
BusID "PCI:4@0:0:0"
Option "ConstrainCursor" "off"
EndSection
Section "Screen"
Identifier "nvidia"
Device "nvidia"
Option "AllowEmptyInitialConfiguration" "on"
Option "IgnoreDisplayDevices" "CRT"
EndSection- /var/log/Xorg.0.log
[ 27.653] (--) Log file renamed from "/var/log/Xorg.pid-1161.log" to "/var/log/Xorg.0.log"
[ 27.654]
X.Org X Server 1.18.4
Release Date: 2016-07-19
[ 27.654] X Protocol Version 11, Revision 0
[ 27.654] Build Operating System: Linux 4.4.0-45-generic x86_64 Ubuntu
[ 27.654] Current Operating System: Linux adri-X555LF 4.4.0-59-generic #80-Ubuntu SMP Fri Jan 6 17:47:47 UTC 2017 x86_64
[ 27.654] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-59-generic.efi.signed root=UUID=fd980306-3451-42f5-bcae-4ed6f40cb5cc ro quiet splash vt.handoff=7
[ 27.654] Build Date: 02 November 2016 10:06:10PM
[ 27.654] xorg-server 2:1.18.4-0ubuntu0.2 (For technical support please see http://www.ubuntu.com/support)
[ 27.654] Current version of pixman: 0.33.6
[ 27.654] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 27.654] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 27.654] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan 30 00:16:10 2017
[ 27.662] (==) Using config file: "/etc/X11/xorg.conf"
[ 27.662] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 27.672] (==) ServerLayout "layout"
[ 27.672] (**) |-->Screen "nvidia" (0)
[ 27.672] (**) | |-->Monitor "<default monitor>"
[ 27.678] (**) | |-->Device "nvidia"
[ 27.678] (**) | |-->GPUDevice "nvidia"
[ 27.678] (==) No monitor specified for screen "nvidia".
Using a default monitor configuration.
[ 27.678] (**) |-->Inactive Device "intel"
[ 27.678] (==) Automatically adding devices
[ 27.678] (==) Automatically enabling devices
[ 27.678] (==) Automatically adding GPU devices
[ 27.678] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 27.679] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 27.679] Entry deleted from font path.
[ 27.679] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 27.679] Entry deleted from font path.
[ 27.679] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 27.679] Entry deleted from font path.
[ 27.679] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 27.679] Entry deleted from font path.
[ 27.679] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 27.679] Entry deleted from font path.
[ 27.679] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 27.679] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 27.679] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 27.686] (II) Loader magic: 0x55f6cbb43dc0
[ 27.686] (II) Module ABI versions:
[ 27.686] X.Org ANSI C Emulation: 0.4
[ 27.686] X.Org Video Driver: 20.0
[ 27.686] X.Org XInput driver : 22.1
[ 27.686] X.Org Server Extension : 9.0
[ 27.687] (++) using VT number 7
[ 27.687] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 27.687] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 27.688] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 27.689] (--) PCI:*(0:0:2:0) 8086:1616:1043:1a6d rev 9, Mem @ 0xa1000000/16777216, 0xb0000000/268435456, I/O @ 0x00005000/64
[ 27.689] (--) PCI: (0:4:0:0) 10de:1346:1043:1a6d rev 162, Mem @ 0xa2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/524288
[ 27.689] (WW) "glamoregl" will not be loaded unless you've specified it to be loaded elsewhere.
[ 27.689] (II) "glx" will be loaded by default.
[ 27.689] (II) LoadModule: "glx"
[ 27.689] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so
[ 28.397] (II) Module glx: vendor="NVIDIA Corporation"
[ 28.397] compiled for 4.0.2, module version = 1.0.0
[ 28.397] Module class: X.Org Server Extension
[ 28.397] (II) NVIDIA GLX Module 367.57 Mon Oct 3 20:28:17 PDT 2016
[ 28.397] (II) LoadModule: "nvidia"
[ 28.397] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so
[ 28.443] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 28.443] compiled for 4.0.2, module version = 1.0.0
[ 28.443] Module class: X.Org Video Driver
[ 28.443] (II) LoadModule: "modesetting"
[ 28.454] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 28.454] (II) Module modesetting: vendor="X.Org Foundation"
[ 28.454] compiled for 1.18.4, module version = 1.18.4
[ 28.454] Module class: X.Org Video Driver
[ 28.454] ABI class: X.Org Video Driver, version 20.0
[ 28.454] (II) NVIDIA dlloader X Driver 367.57 Mon Oct 3 20:03:48 PDT 2016
[ 28.454] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 28.454] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 28.471] (II) Loading sub module "fb"
[ 28.471] (II) LoadModule: "fb"
[ 28.471] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 28.494] (II) Module fb: vendor="X.Org Foundation"
[ 28.494] compiled for 1.18.4, module version = 1.0.0
[ 28.494] ABI class: X.Org ANSI C Emulation, version 0.4
[ 28.494] (II) Loading sub module "wfb"
[ 28.494] (II) LoadModule: "wfb"
[ 28.494] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 28.501] (II) Module wfb: vendor="X.Org Foundation"
[ 28.501] compiled for 1.18.4, module version = 1.0.0
[ 28.501] ABI class: X.Org ANSI C Emulation, version 0.4
[ 28.501] (II) Loading sub module "ramdac"
[ 28.501] (II) LoadModule: "ramdac"
[ 28.501] (II) Module "ramdac" already built-in
[ 28.517] (II) modeset(G0): using drv /dev/dri/card1
[ 28.517] (II) NVIDIA(0): Creating default Display subsection in Screen section
"nvidia" for depth/fbbpp 24/32
[ 28.517] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 28.517] (==) NVIDIA(0): RGB weight 888
[ 28.517] (==) NVIDIA(0): Default visual is TrueColor
[ 28.517] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 28.531] (**) NVIDIA(0): Option "ConstrainCursor" "off"
[ 28.531] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration" "on"
[ 28.531] (**) NVIDIA(0): Option "IgnoreDisplayDevices" "CRT"
[ 28.531] (**) NVIDIA(0): Enabling 2D acceleration
[ 28.686] (II) NVIDIA(0): NVIDIA GPU GeForce 930M (GM108-A) at PCI:4:0:0 (GPU-0)
[ 28.686] (--) NVIDIA(0): Memory: 2097152 kBytes
[ 28.686] (--) NVIDIA(0): VideoBIOS: 82.08.46.00.26
[ 28.686] (II) NVIDIA(0): Detected PCI Express Link width: 4X
[ 28.686] (II) NVIDIA(0): Validated MetaModes:
[ 28.686] (II) NVIDIA(0): "NULL"
[ 28.686] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[ 28.686] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[ 28.686] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 28.686] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
[ 28.686] (**) modeset(G0): Option "AccelMethod" "None"
[ 28.686] (==) modeset(G0): RGB weight 888
[ 28.686] (==) modeset(G0): Default visual is TrueColor
[ 28.686] (**) modeset(G0): glamor disabled
[ 28.686] (II) modeset(G0): ShadowFB: preferred YES, enabled YES
[ 28.688] (II) modeset(G0): Output eDP-1-1 has no monitor section
[ 28.688] (II) modeset(G0): Output DP-1-1 has no monitor section
[ 28.688] (II) modeset(G0): Output HDMI-1-1 has no monitor section
[ 28.688] (II) modeset(G0): Output HDMI-1-2 has no monitor section
[ 28.690] (II) modeset(G0): EDID for output eDP-1-1
[ 28.690] (II) modeset(G0): Manufacturer: SDC Model: 354a Serial#: 0
[ 28.690] (II) modeset(G0): Year: 2011 Week: 0
[ 28.690] (II) modeset(G0): EDID Version: 1.3
[ 28.690] (II) modeset(G0): Digital Display Input
[ 28.690] (II) modeset(G0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 28.690] (II) modeset(G0): Gamma: 2.20
[ 28.690] (II) modeset(G0): No DPMS capabilities specified
[ 28.690] (II) modeset(G0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 28.690] (II) modeset(G0): First detailed timing is preferred mode
[ 28.690] (II) modeset(G0): redX: 0.620 redY: 0.355 greenX: 0.300 greenY: 0.580
[ 28.690] (II) modeset(G0): blueX: 0.150 blueY: 0.090 whiteX: 0.313 whiteY: 0.329
[ 28.690] (II) modeset(G0): Manufacturer's mask: 0
[ 28.690] (II) modeset(G0): Supported detailed timing:
[ 28.690] (II) modeset(G0): clock: 69.4 MHz Image Size: 344 x 194 mm
[ 28.690] (II) modeset(G0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1464 h_border: 0
[ 28.690] (II) modeset(G0): v_active: 768 v_sync: 770 v_sync_end 775 v_blanking: 790 v_border: 0
[ 28.690] (II) modeset(G0): Unknown vendor-specific block f
[ 28.690] (II) modeset(G0): SAMSUNG
[ 28.690] (II) modeset(G0): 156AT35-P01
[ 28.690] (II) modeset(G0): EDID (in hex):
[ 28.690] (II) modeset(G0): 00ffffffffffff004c834a3500000000
[ 28.690] (II) modeset(G0): 00150103802213780ace859e5b4c9426
[ 28.690] (II) modeset(G0): 17505400000001010101010101010101
[ 28.690] (II) modeset(G0): 0101010101011b1b5662500016303020
[ 28.690] (II) modeset(G0): 250058c2100000190000000f00000000
[ 28.690] (II) modeset(G0): 00000000001eb4027400000000fe0053
[ 28.690] (II) modeset(G0): 414d53554e470a2020202020000000fe
[ 28.690] (II) modeset(G0): 00313536415433352d5030310a200053
[ 28.690] (II) modeset(G0): Printing probed modes for output eDP-1-1
[ 28.690] (II) modeset(G0): Modeline "1366x768"x60.0 69.39 1366 1414 1446 1464 768 770 775 790 -hsync -vsync (47.4 kHz eP)
[ 28.690] (II) modeset(G0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz d)
[ 28.690] (II) modeset(G0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz d)
[ 28.690] (II) modeset(G0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 28.690] (II) modeset(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 28.690] (II) modeset(G0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 28.690] (II) modeset(G0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 28.690] (II) modeset(G0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 28.690] (II) modeset(G0): Modeline "960x600"x120.0 77.00 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[ 28.690] (II) modeset(G0): Modeline "960x540"x120.0 69.25 960 984 1000 1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[ 28.690] (II) modeset(G0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 28.690] (II) modeset(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 28.690] (II) modeset(G0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 28.690] (II) modeset(G0): Modeline "840x525"x120.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[ 28.690] (II) modeset(G0): Modeline "840x525"x119.8 59.50 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[ 28.690] (II) modeset(G0): Modeline "800x512"x120.3 51.56 800 800 828 832 512 512 514 515 doublescan +hsync +vsync (62.0 kHz d)
[ 28.690] (II) modeset(G0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 28.690] (II) modeset(G0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 28.690] (II) modeset(G0): Modeline "720x450"x119.8 53.25 720 760 836 952 450 451 454 467 doublescan -hsync +vsync (55.9 kHz d)
[ 28.690] (II) modeset(G0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 28.690] (II) modeset(G0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 28.690] (II) modeset(G0): Modeline "680x384"x119.6 42.38 680 716 784 888 384 385 390 399 doublescan -hsync +vsync (47.7 kHz d)
[ 28.690] (II) modeset(G0): Modeline "680x384"x119.9 36.00 680 704 720 760 384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)
[ 28.690] (II) modeset(G0): Modeline "576x432"x120.1 40.81 576 608 668 760 432 432 434 447 doublescan -hsync +vsync (53.7 kHz d)
[ 28.690] (II) modeset(G0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 28.690] (II) modeset(G0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 28.690] (II) modeset(G0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 28.690] (II) modeset(G0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 28.690] (II) modeset(G0): EDID for output DP-1-1
[ 28.691] (II) modeset(G0): EDID for output HDMI-1-1
[ 28.691] (II) modeset(G0): EDID for output HDMI-1-2
[ 28.691] (II) modeset(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 28.691] (==) modeset(G0): DPI set to (96, 96)
[ 28.691] (II) Loading sub module "fb"
[ 28.691] (II) LoadModule: "fb"
[ 28.691] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 28.691] (II) Module fb: vendor="X.Org Foundation"
[ 28.691] compiled for 1.18.4, module version = 1.0.0
[ 28.691] ABI class: X.Org ANSI C Emulation, version 0.4
[ 28.691] (II) Loading sub module "shadow"
[ 28.691] (II) LoadModule: "shadow"
[ 28.691] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 28.692] (II) Module shadow: vendor="X.Org Foundation"
[ 28.692] compiled for 1.18.4, module version = 1.1.0
[ 28.692] ABI class: X.Org ANSI C Emulation, version 0.4
[ 28.692] (--) Depth 24 pixmap format is 32 bpp
[ 28.707] (==) modeset(G0): Backing store enabled
[ 28.707] (==) modeset(G0): Silken mouse enabled
[ 28.707] (II) modeset(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 28.708] (==) modeset(G0): DPMS enabled
[ 28.708] (WW) modeset(G0): Option "AllowEmptyInitialConfiguration" is not used
[ 28.708] (WW) modeset(G0): Option "IgnoreDisplayDevices" is not used
[ 29.031] (II) NVIDIA: Using 12288.00 MB of virtual memory for indirect memory
[ 29.031] (II) NVIDIA: access.
[ 29.079] (II) NVIDIA(0): Setting mode "NULL"
[ 29.089] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 29.089] (==) NVIDIA(0): Backing store enabled
[ 29.089] (==) NVIDIA(0): Silken mouse enabled
[ 29.090] (==) NVIDIA(0): DPMS enabled
[ 29.090] (II) Loading sub module "dri2"
[ 29.090] (II) LoadModule: "dri2"
[ 29.090] (II) Module "dri2" already built-in
[ 29.090] (II) NVIDIA(0): [DRI2] Setup complete
[ 29.090] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 29.090] (--) RandR disabled
[ 29.107] (II) SELinux: Disabled on system
[ 29.108] (II) Initializing extension GLX
[ 29.108] (II) Indirect GLX disabled.
[ 29.109] (II) modeset(G0): Damage tracking initialized
[ 29.314] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 29.314] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 29.314] (II) LoadModule: "evdev"
[ 29.314] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 29.330] (II) Module evdev: vendor="X.Org Foundation"
[ 29.330] compiled for 1.18.1, module version = 2.10.1
[ 29.330] Module class: X.Org XInput Driver
[ 29.330] ABI class: X.Org XInput driver, version 22.1
[ 29.330] (II) Using input driver 'evdev' for 'Power Button'
[ 29.330] (**) Power Button: always reports core events
[ 29.330] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 29.330] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 29.330] (--) evdev: Power Button: Found keys
[ 29.330] (II) evdev: Power Button: Configuring as keyboard
[ 29.330] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 29.330] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 29.330] (**) Option "xkb_rules" "evdev"
[ 29.330] (**) Option "xkb_model" "pc105"
[ 29.330] (**) Option "xkb_layout" "fr"
[ 29.330] (**) Option "xkb_variant" "oss"
[ 29.348] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 29.348] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 29.348] (II) Using input driver 'evdev' for 'Video Bus'
[ 29.348] (**) Video Bus: always reports core events
[ 29.348] (**) evdev: Video Bus: Device: "/dev/input/event4"
[ 29.348] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 29.348] (--) evdev: Video Bus: Found keys
[ 29.348] (II) evdev: Video Bus: Configuring as keyboard
[ 29.348] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9/event4"
[ 29.348] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 29.348] (**) Option "xkb_rules" "evdev"
[ 29.348] (**) Option "xkb_model" "pc105"
[ 29.348] (**) Option "xkb_layout" "fr"
[ 29.348] (**) Option "xkb_variant" "oss"
[ 29.349] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 29.349] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 29.349] (II) Using input driver 'evdev' for 'Video Bus'
[ 29.349] (**) Video Bus: always reports core events
[ 29.349] (**) evdev: Video Bus: Device: "/dev/input/event5"
[ 29.349] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 29.349] (--) evdev: Video Bus: Found keys
[ 29.349] (II) evdev: Video Bus: Configuring as keyboard
[ 29.349] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:22/LNXVIDEO:01/input/input10/event5"
[ 29.349] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 29.349] (**) Option "xkb_rules" "evdev"
[ 29.349] (**) Option "xkb_model" "pc105"
[ 29.349] (**) Option "xkb_layout" "fr"
[ 29.349] (**) Option "xkb_variant" "oss"
[ 29.349] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 29.350] (II) No input driver specified, ignoring this device.
[ 29.350] (II) This device may have been added with another device file.
[ 29.350] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 29.350] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 29.350] (II) Using input driver 'evdev' for 'Sleep Button'
[ 29.350] (**) Sleep Button: always reports core events
[ 29.350] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[ 29.350] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 29.350] (--) evdev: Sleep Button: Found keys
[ 29.350] (II) evdev: Sleep Button: Configuring as keyboard
[ 29.350] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[ 29.350] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 29.350] (**) Option "xkb_rules" "evdev"
[ 29.350] (**) Option "xkb_model" "pc105"
[ 29.350] (**) Option "xkb_layout" "fr"
[ 29.350] (**) Option "xkb_variant" "oss"
[ 29.351] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event9)
[ 29.351] (II) No input driver specified, ignoring this device.
[ 29.351] (II) This device may have been added with another device file.
[ 29.351] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event10)
[ 29.351] (II) No input driver specified, ignoring this device.
[ 29.351] (II) This device may have been added with another device file.
[ 29.351] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event11)
[ 29.351] (II) No input driver specified, ignoring this device.
[ 29.351] (II) This device may have been added with another device file.
[ 29.351] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event6)
[ 29.351] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 29.351] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 29.351] (**) Logitech USB Receiver: always reports core events
[ 29.352] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event6"
[ 29.352] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc534
[ 29.352] (--) evdev: Logitech USB Receiver: Found keys
[ 29.352] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 29.352] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:046D:C534.0001/input/input14/event6"
[ 29.352] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 10)
[ 29.352] (**) Option "xkb_rules" "evdev"
[ 29.352] (**) Option "xkb_model" "pc105"
[ 29.352] (**) Option "xkb_layout" "fr"
[ 29.352] (**) Option "xkb_variant" "oss"
[ 29.352] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event7)
[ 29.352] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 29.352] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 29.352] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 29.352] (**) Logitech USB Receiver: always reports core events
[ 29.352] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event7"
[ 29.352] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc534
[ 29.352] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[ 29.352] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 29.352] (--) evdev: Logitech USB Receiver: Found relative axes
[ 29.352] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 29.352] (--) evdev: Logitech USB Receiver: Found absolute axes
[ 29.352] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[ 29.352] (--) evdev: Logitech USB Receiver: Found keys
[ 29.352] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 29.352] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 29.352] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 29.352] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 29.352] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 29.352] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:046D:C534.0002/input/input15/event7"
[ 29.352] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 11)
[ 29.352] (**) Option "xkb_rules" "evdev"
[ 29.352] (**) Option "xkb_model" "pc105"
[ 29.352] (**) Option "xkb_layout" "fr"
[ 29.352] (**) Option "xkb_variant" "oss"
[ 29.353] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 29.353] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[ 29.353] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 29.353] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 29.353] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 29.353] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 29.353] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 29.353] (II) No input driver specified, ignoring this device.
[ 29.353] (II) This device may have been added with another device file.
[ 29.354] (II) config/udev: Adding input device USB Camera (/dev/input/event12)
[ 29.354] (**) USB Camera: Applying InputClass "evdev keyboard catchall"
[ 29.354] (II) Using input driver 'evdev' for 'USB Camera'
[ 29.354] (**) USB Camera: always reports core events
[ 29.354] (**) evdev: USB Camera: Device: "/dev/input/event12"
[ 29.354] (--) evdev: USB Camera: Vendor 0xbda Product 0x57b5
[ 29.354] (--) evdev: USB Camera: Found keys
[ 29.354] (II) evdev: USB Camera: Configuring as keyboard
[ 29.354] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input19/event12"
[ 29.354] (II) XINPUT: Adding extended input device "USB Camera" (type: KEYBOARD, id 12)
[ 29.354] (**) Option "xkb_rules" "evdev"
[ 29.354] (**) Option "xkb_model" "pc105"
[ 29.354] (**) Option "xkb_layout" "fr"
[ 29.354] (**) Option "xkb_variant" "oss"
[ 29.354] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event13)
[ 29.354] (II) No input driver specified, ignoring this device.
[ 29.354] (II) This device may have been added with another device file.
[ 29.355] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event14)
[ 29.355] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 29.355] (II) Using input driver 'evdev' for 'Asus WMI hotkeys'
[ 29.355] (**) Asus WMI hotkeys: always reports core events
[ 29.355] (**) evdev: Asus WMI hotkeys: Device: "/dev/input/event14"
[ 29.355] (--) evdev: Asus WMI hotkeys: Vendor 0 Product 0
[ 29.355] (--) evdev: Asus WMI hotkeys: Found keys
[ 29.355] (II) evdev: Asus WMI hotkeys: Configuring as keyboard
[ 29.355] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input21/event14"
[ 29.355] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 13)
[ 29.355] (**) Option "xkb_rules" "evdev"
[ 29.355] (**) Option "xkb_model" "pc105"
[ 29.355] (**) Option "xkb_layout" "fr"
[ 29.355] (**) Option "xkb_variant" "oss"
[ 29.355] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 29.355] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 29.355] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 29.355] (**) AT Translated Set 2 keyboard: always reports core events
[ 29.355] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[ 29.355] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 29.355] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 29.355] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 29.355] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[ 29.355] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[ 29.355] (**) Option "xkb_rules" "evdev"
[ 29.355] (**) Option "xkb_model" "pc105"
[ 29.355] (**) Option "xkb_layout" "fr"
[ 29.355] (**) Option "xkb_variant" "oss"
[ 29.356] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event8)
[ 29.356] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[ 29.356] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchscreen catchall"
[ 29.356] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[ 29.356] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[ 29.356] (II) LoadModule: "synaptics"
[ 29.356] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 29.356] (II) Module synaptics: vendor="X.Org Foundation"
[ 29.356] compiled for 1.18.1, module version = 1.8.2
[ 29.356] Module class: X.Org XInput Driver
[ 29.356] ABI class: X.Org XInput driver, version 22.1
[ 29.356] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[ 29.356] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 29.356] (**) Option "Device" "/dev/input/event8"
[ 29.408] (II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property
[ 29.408] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 3097 (res 31)
[ 29.408] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 2119 (res 32)
[ 29.408] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[ 29.408] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[ 29.408] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left double triple
[ 29.408] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[ 29.408] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 29.408] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 29.408] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 29.436] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input13/event8"
[ 29.436] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 15)
[ 29.436] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 29.436] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[ 29.436] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.053
[ 29.436] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[ 29.436] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[ 29.436] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 29.436] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 29.436] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 29.436] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse1)
[ 29.436] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"Merci d'avance 
Dernière modification par Adarien (Le 30/01/2017, à 12:06)
Hors ligne
#2 Le 30/01/2017, à 10:00
- lejurassien40
Re : [RESOLU] Ecran à moitié noir après connexion HDMI
Sauf erreur il n'y a plus de xorg.conf sur 16.04 ...Voir Ici
Mais il est toujours utilisable.
As-tu installé le driver propriétaire et nvidia-settings ???
https://doc.ubuntu-fr.org/nvidia
Dernière modification par lejurassien40 (Le 30/01/2017, à 10:02)
"De tous ceux qui n'ont rien à dire, les plus agréables sont ceux qui se taisent !" Ubuntu 20.04, Debian Buster, W10 LTS pour jouer.
"Ne vous trompez pas entre ma personnalité et mon attitude. Ma personnalité est "qui je suis", mon attitude dépend de "qui vous êtes".
Hors ligne
#3 Le 30/01/2017, à 11:18
- Adarien
Re : [RESOLU] Ecran à moitié noir après connexion HDMI
J'ai bien le driver propriétaire et nvidia-settings. D'ailleurs j'ai essayé de revenir au driver libre mais ça n'a pas résolu le problème.
Je vais jeter un coup d'oeil à ton lien!
Merci pour la réponse rapide
Hors ligne
#4 Le 30/01/2017, à 12:04
- Adarien
Re : [RESOLU] Ecran à moitié noir après connexion HDMI
Problème résolu!
J'ai reconfiguré manuellement le fichier xrandr et l'écran fonctionne de nouveau.
Pour le reconfigurer j'ai provoqué le problème (déconnexion du cable HDMI, apparition de l'écran à moitié noir) puis j'ai lancé les commandes suivantes pour forcer la position relative, la résolution et la fréquence d'affichage de mes écrans aux valeurs que je souhaitais.
xrandr --output eDP-1-1 --pos 0x0 --mode 1366x768 --rate 60 --primary
xrandr --output HDMI-1-2 --pos 1366x0 --mode 1920x1080 --rate 60Hors ligne