Pages : 1
#1 Le 13/02/2017, à 12:30
- ralphscorff
[résolu]Lenteur ouverture Ubuntu 16.04, dual boot S...
Bonjour à tous,
Je suis en dual boot avec S... et je trouve que le démarrage d'Ubuntu 16.04 est très long comparé à ce que je connaissais sous des versions antérieurs...Si vous pouvez m'aider, merci d'avance.
Dernière modification par ralphscorff (Le 14/02/2017, à 12:40)
Hors ligne
#2 Le 13/02/2017, à 13:18
- malbo
Re : [résolu]Lenteur ouverture Ubuntu 16.04, dual boot S...
Bonjour,
Je viens de voir que tu as galéré il y a peu de jours avec le WiFi : https://forum.ubuntu-fr.org/viewtopic.php?id=2004833
Je te prie de désactiver provisoirement le WiFi (pour ne pas que ça impacte sur le temps de démarrage) et te connecter en filaire. Après cela, je te prie de démarrer ton ordi et de donner approximativement le temps qui s'écoule entre la sélection de ton entrée dans le menu Grub et l'apparition de l'écran de connexion de session.
D'autre part, peux-tu indiquer le nom complet du modèle de ton ordi ?
Dernière modification par malbo (Le 13/02/2017, à 13:19)
Hors ligne
#3 Le 13/02/2017, à 18:04
- ralphscorff
Re : [résolu]Lenteur ouverture Ubuntu 16.04, dual boot S...
Bonjour malbo,
Et tout d'abord "merci" du suivi...voilà le retour suite à tes questions, le temps est d'une minute chrono en main.
Caractéristiques du PC:
ACER 4810T inten Core 2 solo processor
SU3500 1,4 GHz 800MHz FSB
VGA Intel GMA 4500MHD
Memory 3GB DDR3 250 GB HDD
WLAN Acer Nplify 802.11b/g/Draft-N
Hors ligne
#4 Le 13/02/2017, à 18:14
- malbo
Re : [résolu]Lenteur ouverture Ubuntu 16.04, dual boot S...
le temps est d'une minute chrono en main.
Et si maintenant tu déconnectes la connexion filaire et que tu réactives le WiFi, que devient ce temps ?
Hors ligne
#5 Le 13/02/2017, à 18:26
- ralphscorff
Re : [résolu]Lenteur ouverture Ubuntu 16.04, dual boot S...
Le temps est sensiblement le même, "une minute"......
Hors ligne
#6 Le 13/02/2017, à 18:31
- smokeh
Re : [résolu]Lenteur ouverture Ubuntu 16.04, dual boot S...
c'est correct
Hors ligne
#7 Le 13/02/2017, à 18:32
- ralphscorff
Re : [résolu]Lenteur ouverture Ubuntu 16.04, dual boot S...
donc...le temps de démarrage de ma session sous Ubuntu est correct?
Les caractéristiques de mon PC sont-elles suffisantes pour cette version d'ubuntu?
Hors ligne
#8 Le 13/02/2017, à 18:35
- smokeh
Re : [résolu]Lenteur ouverture Ubuntu 16.04, dual boot S...
donc...le temps de démarrage de ma session sous Ubuntu est correct?
Les caractéristiques de mon PC sont-elles suffisantes pour cette version d'ubuntu?
je serai parti sur une version xubuntu . avis perso. Si ça tourne correctement après ça reste bon . tant que il n'y a pas d'application qui plantent.
Hors ligne
#9 Le 13/02/2017, à 18:37
- ralphscorff
Re : [résolu]Lenteur ouverture Ubuntu 16.04, dual boot S...
Bien pris smokeh....si je veux évoluer vers xubuntu, je peux changer celle-ci directement ou suis je obligé de formater ma partition Ubuntu...je débute dsl
Hors ligne
#10 Le 13/02/2017, à 18:42
- smokeh
Re : [résolu]Lenteur ouverture Ubuntu 16.04, dual boot S...
Bien pris smokeh....si je veux évoluer vers xubuntu, je peux changer celle-ci directement ou suis je obligé de formater ma partition Ubuntu...je débute dsl
si c'est un début . je ferai une installation propre. (comme ça vous apprenez à installer en mème temps )
essayez aussi la version lubuntu . qui est encore plus légère. je vous conseille de regarder la documentation ubuntu avant tout pour vous donner un avis sur les différences des distributions.
Après c'est à votre goût ... mais avec des machine vieillissante c'est mieux d'avoir des distribution légère.
Dernière modification par smokeh (Le 13/02/2017, à 18:43)
Hors ligne
#11 Le 13/02/2017, à 18:49
- ralphscorff
Re : [résolu]Lenteur ouverture Ubuntu 16.04, dual boot S...
Merci beaucoup smokeh, je vais fouiller...et comparer....si je veux installer proprement:
-je supprime ma partition Ubuntu et je réinstalle xubuntu ou lubuntu....tout simplement en allouant une partition au disque suffisante au moins 25 30 Go.
Hors ligne
#12 Le 13/02/2017, à 19:07
- ralphscorff
Re : [résolu]Lenteur ouverture Ubuntu 16.04, dual boot S...
Je repose la question, après avoir fouillé sur les caractéristiques minimales requises pour qu'un système supporte Ubuntu, la mienne n'a pas l'air d'être complètement obsolète...pour l'instant je trouve pas que cette version "beug", si ce n'est qu'en mode "jeu" forcement en faisant tourner des usines comme "flightgear" par exemple, mais j'ai S...en dualboot donc pour cela pas de pb.
Hors ligne
#13 Le 13/02/2017, à 19:16
- smokeh
Re : [résolu]Lenteur ouverture Ubuntu 16.04, dual boot S...
votre ordinateur est sorti en 2009 d’après google. ça va c'est quasiment 8 ans ... tant que ça fonctionne !!!
Dernière modification par smokeh (Le 13/02/2017, à 19:18)
Hors ligne
#14 Le 13/02/2017, à 19:21
- ralphscorff
Re : [résolu]Lenteur ouverture Ubuntu 16.04, dual boot S...
Ok je vais poursuivre avec cette version d'Ubuntu, qui me va pour le moment sans "bug", le changement c'est l'ergonomie avec laquelle on est habitué depuis des années avec Wi.....il n'est jamais trop tard et on retrouve si on prend le temps largement la même chose en matière de logiciel......seul le jeu reste à la traîne.
Merci du suivi à tous.
Hors ligne
#15 Le 13/02/2017, à 19:43
- malbo
Re : [résolu]Lenteur ouverture Ubuntu 16.04, dual boot S...
Est-ce que tu as toujours Windows dans cet ordi ? Si oui lequel (Vista, Win7, autre) et temps de démarrage de ce Windows nettement plus rapide ou semblable à Ubuntu ?
Hors ligne
#16 Le 13/02/2017, à 20:11
- ralphscorff
Re : [résolu]Lenteur ouverture Ubuntu 16.04, dual boot S...
Je reviens suite à ta question malbo, Win7, plus rapide en ouverture.
Hors ligne
#17 Le 14/02/2017, à 10:05
- ralphscorff
Re : [résolu]Lenteur ouverture Ubuntu 16.04, dual boot S...
Et????
Hors ligne
#18 Le 14/02/2017, à 10:21
- malbo
Re : [résolu]Lenteur ouverture Ubuntu 16.04, dual boot S...
Bonjour,
Je te prie de faire un Boot-Info depuis une session de ton Ubuntu installé et de donner l'URL de ce Boot-Info dans ta réponse.
EDIT : pourrais-tu indiquer le temps mis par Win7 pour arriver à l'écran de connexion de session ?
Dernière modification par malbo (Le 14/02/2017, à 10:22)
Hors ligne
#19 Le 14/02/2017, à 11:37
- ralphscorff
Re : [résolu]Lenteur ouverture Ubuntu 16.04, dual boot S...
Bonjour malbo,
Pour ce qui est du temps que met Win7 pour arriver à l'écran de connexion de session est d'environ "une minute".
L'URL de boot-info: http://paste2.org/cjsEmI8g
Hors ligne
#20 Le 14/02/2017, à 11:52
- malbo
Re : [résolu]Lenteur ouverture Ubuntu 16.04, dual boot S...
Ton Boot-Info est là :
Boot Info Script cfd9efe + Boot-Repair extra info [Boot-Info 26Apr2016]
============================= Boot Info Summary: ===============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos5)/boot/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_msdos biosdisk
---------------------------------------------------------------------------
sda1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 7/2008: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe
sda2: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 7/2008: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda3: __________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 16.04.2 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/grub/i386-pc/core.img
sda6: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 232.9 GiB, 250059350016 bytes, 488397168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 240,432,505 240,430,458 7 NTFS / exFAT / HPFS
/dev/sda2 298,953,584 488,392,538 189,438,955 7 NTFS / exFAT / HPFS
/dev/sda3 240,433,150 298,952,703 58,519,554 5 Extended
/dev/sda5 240,433,152 292,804,607 52,371,456 83 Linux
/dev/sda6 292,806,656 298,952,703 6,146,048 82 Linux swap / Solaris
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 BABC54CABC548335 ntfs
/dev/sda2 E6EA1CD8EA1CA6B9 ntfs Ralph
/dev/sda5 28acbdea-dcbd-402a-b897-4e59721a629a ext4
/dev/sda6 f82e3177-0eb7-41ce-bd34-f6bfb4da00f4 swap
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Feb 14 2017 ata-HL-DT-ST_DVDRAM_GU10N_K0995733120 -> ../../sr0
lrwxrwxrwx 1 root root 9 Feb 14 10:34 ata-ST9250315AS_5VC78Z80 -> ../../sda
lrwxrwxrwx 1 root root 10 Feb 14 10:36 ata-ST9250315AS_5VC78Z80-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Feb 14 10:36 ata-ST9250315AS_5VC78Z80-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Feb 14 10:34 ata-ST9250315AS_5VC78Z80-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Feb 14 10:34 ata-ST9250315AS_5VC78Z80-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 Feb 14 10:34 ata-ST9250315AS_5VC78Z80-part6 -> ../../sda6
lrwxrwxrwx 1 root root 9 Feb 14 10:34 wwn-0x5000c500192d02ea -> ../../sda
lrwxrwxrwx 1 root root 10 Feb 14 10:36 wwn-0x5000c500192d02ea-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Feb 14 10:36 wwn-0x5000c500192d02ea-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Feb 14 10:34 wwn-0x5000c500192d02ea-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Feb 14 10:34 wwn-0x5000c500192d02ea-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 Feb 14 10:34 wwn-0x5000c500192d02ea-part6 -> ../../sda6
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda5 / ext4 (rw,relatime,errors=remount-ro,data=ordered)
=========================== sda5/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 28acbdea-dcbd-402a-b897-4e59721a629a
else
search --no-floppy --fs-uuid --set=root 28acbdea-dcbd-402a-b897-4e59721a629a
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=C
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=10
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=10
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-28acbdea-dcbd-402a-b897-4e59721a629a' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 28acbdea-dcbd-402a-b897-4e59721a629a
else
search --no-floppy --fs-uuid --set=root 28acbdea-dcbd-402a-b897-4e59721a629a
fi
linux /boot/vmlinuz-4.4.0-62-generic root=UUID=28acbdea-dcbd-402a-b897-4e59721a629a ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.4.0-62-generic
}
submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-28acbdea-dcbd-402a-b897-4e59721a629a' {
menuentry 'Ubuntu, with Linux 4.4.0-62-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-62-generic-advanced-28acbdea-dcbd-402a-b897-4e59721a629a' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 28acbdea-dcbd-402a-b897-4e59721a629a
else
search --no-floppy --fs-uuid --set=root 28acbdea-dcbd-402a-b897-4e59721a629a
fi
echo 'Loading Linux 4.4.0-62-generic ...'
linux /boot/vmlinuz-4.4.0-62-generic root=UUID=28acbdea-dcbd-402a-b897-4e59721a629a ro quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-4.4.0-62-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-62-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-62-generic-init-upstart-28acbdea-dcbd-402a-b897-4e59721a629a' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 28acbdea-dcbd-402a-b897-4e59721a629a
else
search --no-floppy --fs-uuid --set=root 28acbdea-dcbd-402a-b897-4e59721a629a
fi
echo 'Loading Linux 4.4.0-62-generic ...'
linux /boot/vmlinuz-4.4.0-62-generic root=UUID=28acbdea-dcbd-402a-b897-4e59721a629a ro quiet splash $vt_handoff init=/sbin/upstart
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-4.4.0-62-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-62-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-62-generic-recovery-28acbdea-dcbd-402a-b897-4e59721a629a' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 28acbdea-dcbd-402a-b897-4e59721a629a
else
search --no-floppy --fs-uuid --set=root 28acbdea-dcbd-402a-b897-4e59721a629a
fi
echo 'Loading Linux 4.4.0-62-generic ...'
linux /boot/vmlinuz-4.4.0-62-generic root=UUID=28acbdea-dcbd-402a-b897-4e59721a629a ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-4.4.0-62-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-31-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-31-generic-advanced-28acbdea-dcbd-402a-b897-4e59721a629a' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 28acbdea-dcbd-402a-b897-4e59721a629a
else
search --no-floppy --fs-uuid --set=root 28acbdea-dcbd-402a-b897-4e59721a629a
fi
echo 'Loading Linux 4.4.0-31-generic ...'
linux /boot/vmlinuz-4.4.0-31-generic root=UUID=28acbdea-dcbd-402a-b897-4e59721a629a ro quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-4.4.0-31-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-31-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-31-generic-init-upstart-28acbdea-dcbd-402a-b897-4e59721a629a' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 28acbdea-dcbd-402a-b897-4e59721a629a
else
search --no-floppy --fs-uuid --set=root 28acbdea-dcbd-402a-b897-4e59721a629a
fi
echo 'Loading Linux 4.4.0-31-generic ...'
linux /boot/vmlinuz-4.4.0-31-generic root=UUID=28acbdea-dcbd-402a-b897-4e59721a629a ro quiet splash $vt_handoff init=/sbin/upstart
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-4.4.0-31-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-31-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-31-generic-recovery-28acbdea-dcbd-402a-b897-4e59721a629a' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 28acbdea-dcbd-402a-b897-4e59721a629a
else
search --no-floppy --fs-uuid --set=root 28acbdea-dcbd-402a-b897-4e59721a629a
fi
echo 'Loading Linux 4.4.0-31-generic ...'
linux /boot/vmlinuz-4.4.0-31-generic root=UUID=28acbdea-dcbd-402a-b897-4e59721a629a ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-4.4.0-31-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 28acbdea-dcbd-402a-b897-4e59721a629a
else
search --no-floppy --fs-uuid --set=root 28acbdea-dcbd-402a-b897-4e59721a629a
fi
knetbsd /boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 28acbdea-dcbd-402a-b897-4e59721a629a
else
search --no-floppy --fs-uuid --set=root 28acbdea-dcbd-402a-b897-4e59721a629a
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows 7 (loader) (on /dev/sda1)' --class windows --class os $menuentry_id_option 'osprober-chain-BABC54CABC548335' {
insmod part_msdos
insmod ntfs
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 BABC54CABC548335
else
search --no-floppy --fs-uuid --set=root BABC54CABC548335
fi
parttool ${root} hidden-
chainloader +1
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
set timeout=10
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda5/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda5 during installation
UUID=28acbdea-dcbd-402a-b897-4e59721a629a / ext4 errors=remount-ro 0 1
# swap was on /dev/sda6 during installation
UUID=f82e3177-0eb7-41ce-bd34-f6bfb4da00f4 none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda5: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
117.055419922 = 125.687300096 boot/grub/grub.cfg 1
132.866806030 = 142.664646656 boot/grub/i386-pc/core.img 1
116.165740967 = 124.732014592 boot/vmlinuz-4.4.0-31-generic 1
119.154045105 = 127.940681728 boot/vmlinuz-4.4.0-62-generic 1
119.154045105 = 127.940681728 vmlinuz 1
116.165740967 = 124.732014592 vmlinuz.old 1
119.494613647 = 128.306364416 boot/initrd.img-4.4.0-31-generic 3
117.032951355 = 125.663174656 boot/initrd.img-4.4.0-62-generic 3
117.032951355 = 125.663174656 initrd.img 3
119.494613647 = 128.306364416 initrd.img.old 3
ADDITIONAL INFORMATION :
=================== log of boot-info 2017-02-14__10h34 ===================
boot-info version : 4ppa40
boot-sav version : 4ppa40
glade2script version : 3.2.3~ppa1
boot-sav-extra version : 4ppa40
boot-info is executed in installed-session (Ubuntu 16.04.2 LTS, xenial, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-4.4.0-62-generic root=UUID=28acbdea-dcbd-402a-b897-4e59721a629a ro quiet splash vt.handoff=7
=================== os-prober:
/dev/sda5:L'OS actuellement utilisé - Ubuntu 16.04.2 LTS CurrentSession:linux
/dev/sda1:Windows 7 (loader):Windows:chain
=================== blkid:
/dev/sda1: UUID="BABC54CABC548335" TYPE="ntfs" PARTUUID="00000001-01"
/dev/sda2: LABEL="Ralph" UUID="E6EA1CD8EA1CA6B9" TYPE="ntfs" PARTUUID="00000001-02"
/dev/sda5: UUID="28acbdea-dcbd-402a-b897-4e59721a629a" TYPE="ext4" PARTUUID="00000001-05"
/dev/sda6: UUID="f82e3177-0eb7-41ce-bd34-f6bfb4da00f4" TYPE="swap" PARTUUID="00000001-06"
1 disks with OS, 2 OS : 1 Linux, 0 MacOS, 1 Windows, 0 unknown type OS.
=================== /etc/grub.d/ :
drwxr-xr-x 2 root root 4096 févr. 10 17:36 grub.d
total 76
-rwxr-xr-x 1 root root 9791 juin 17 2016 00_header
-rwxr-xr-x 1 root root 6258 mars 15 2016 05_debian_theme
-rwxr-xr-x 1 root root 12261 juin 17 2016 10_linux
-rwxr-xr-x 1 root root 11082 juin 17 2016 20_linux_xen
-rwxr-xr-x 1 root root 1992 janv. 28 2016 20_memtest86+
-rwxr-xr-x 1 root root 11692 juin 17 2016 30_os-prober
-rwxr-xr-x 1 root root 1418 juin 17 2016 30_uefi-firmware
-rwxr-xr-x 1 root root 214 juin 17 2016 40_custom
-rwxr-xr-x 1 root root 216 juin 17 2016 41_custom
-rw-r--r-- 1 root root 483 juin 17 2016 README
=================== /etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
=================== UEFI/Legacy mode:
This installed-session is not in EFI-mode.
SecureBoot disabled.
=================== PARTITIONS & DISKS:
sda5 : sda, not-sepboot, grubenv-ok grub2, signed grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, .
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, bootmgr, is-winboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda1.
sda2 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda2.
sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 2048 sectors * 512 bytes
=================== parted -l:
Model: ATA ST9250315AS (scsi)
Disk /dev/sda: 250GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Disk Flags:
Number Start End Size Type File system Flags
1 1049kB 123GB 123GB primary ntfs boot
3 123GB 153GB 30.0GB extended
5 123GB 150GB 26.8GB logical ext4
6 150GB 153GB 3147MB logical linux-swap(v1)
2 153GB 250GB 97.0GB primary ntfs
=================== parted -lm:
BYT;
/dev/sda:250GB:scsi:512:512:msdos:ATA ST9250315AS:;
1:1049kB:123GB:123GB:ntfs::boot;
3:123GB:153GB:30.0GB:::;
5:123GB:150GB:26.8GB:ext4::;
6:150GB:153GB:3147MB:linux-swap(v1)::;
2:153GB:250GB:97.0GB:ntfs::;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL
sda disk 232,9G
sda1 part ntfs 114,7G
sda2 part ntfs 90,3G Ralph
sda3 part 1K
sda5 part ext4 25G
sda6 part swap 3G
sr0 rom 1024M
KNAME ROTA RO RM STATE MOUNTPOINT
sda 1 0 0 running
sda1 1 0 0 /mnt/boot-sav/sda1
sda2 1 0 0 /mnt/boot-sav/sda2
sda3 1 0 0
sda5 1 0 0 /
sda6 1 0 0 [SWAP]
sr0 1 0 1 running
=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=1484772k,nr_inodes=371193,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=300984k,mode=755)
/dev/sda5 on / type ext4 (rw,relatime,errors=remount-ro,data=ordered)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/lib/systemd/systemd-cgroups-agent,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=27,pgrp=1,timeout=0,minproto=5,maxproto=5,direct)
mqueue on /dev/mqueue type mqueue (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,relatime)
tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=300984k,mode=700,uid=1000,gid=1000)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000)
/dev/sda1 on /mnt/boot-sav/sda1 type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
/dev/sda2 on /mnt/boot-sav/sda2 type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sda1 sda2 sda3 sda5 sda6 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): agpgart autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency cuse disk dri drm_dp_aux0 drm_dp_aux1 dvd dvdrw ecryptfs fb0 fd full fuse hidraw0 hidraw1 hpet hugepages hwrng i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 i2c-7 initctl input kmsg kvm lightnvm log mapper mcelog media0 mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda5 sda6 serial sg0 sg1 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom usb userio v4l vfio vga_arbiter vhci vhost-net video0 zero
ls /dev/mapper: control
ls: impossible d'accéder à '': Aucun fichier ou dossier de ce type
=================== hexdump -n512 -C /dev/sda1
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 00 00 80 00 80 00 78 ad 54 0e 00 00 00 00 |........x.T.....|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 35 83 54 bc ca 54 bc ba |........5.T..T..|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 28 10 b9 d8 0f fc f3 aa e9 5f 01 90 90 66 60 1e |(........_...f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a0 f8 01 e8 09 00 |...u...fa.......|
00000170 a0 fb 01 e8 03 00 f4 eb fd b4 01 8b f0 ac 3c 00 |..............<.|
00000180 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 |t.............A |
00000190 64 69 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 |disk read error |
000001a0 6f 63 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d |occurred...BOOTM|
000001b0 47 52 20 69 73 20 6d 69 73 73 69 6e 67 00 0d 0a |GR is missing...|
000001c0 42 4f 4f 54 4d 47 52 20 69 73 20 63 6f 6d 70 72 |BOOTMGR is compr|
000001d0 65 73 73 65 64 00 0d 0a 50 72 65 73 73 20 43 74 |essed...Press Ct|
000001e0 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 6f 20 72 65 |rl+Alt+Del to re|
000001f0 73 74 61 72 74 0d 0a 00 8c a9 be d6 00 00 55 aa |start.........U.|
00000200
=================== hexdump -n512 -C /dev/sda2
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 70 ab d1 11 |........?...p...|
00000020 00 00 00 00 80 00 80 00 ea 9b 4a 0b 00 00 00 00 |..........J.....|
00000030 aa 18 ac 00 00 00 00 00 f6 10 07 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 b9 a6 1c ea d8 1c ea e6 |................|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 28 10 b9 d8 0f fc f3 aa e9 5f 01 90 90 66 60 1e |(........_...f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a0 f8 01 e8 09 00 |...u...fa.......|
00000170 a0 fb 01 e8 03 00 f4 eb fd b4 01 8b f0 ac 3c 00 |..............<.|
00000180 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 45 72 |t.............Er|
00000190 72 65 75 72 20 6c 65 63 74 75 72 65 20 64 69 73 |reur lecture dis|
000001a0 71 75 65 00 0d 0a 42 4f 4f 54 4d 47 52 20 61 62 |que...BOOTMGR ab|
000001b0 73 65 6e 74 00 0d 0a 42 4f 4f 54 4d 47 52 20 63 |sent...BOOTMGR c|
000001c0 6f 6d 70 72 65 73 73 82 00 0d 0a 43 74 72 6c 2b |ompress....Ctrl+|
000001d0 41 6c 74 2b 53 75 70 70 72 20 70 6f 75 72 20 72 |Alt+Suppr pour r|
000001e0 65 64 82 6d 61 72 72 65 72 0d 0a 00 6f 20 72 65 |ed.marrer...o re|
000001f0 73 74 61 72 74 0d 0a 00 8c a4 b5 c9 00 00 55 aa |start.........U.|
00000200
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
udev devtmpfs 1.5G 0 1.5G 0% /dev
tmpfs tmpfs 294M 5.1M 289M 2% /run
/dev/sda5 ext4 25G 8.3G 15G 36% /
tmpfs tmpfs 1.5G 28M 1.5G 2% /dev/shm
tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock
tmpfs tmpfs 1.5G 0 1.5G 0% /sys/fs/cgroup
tmpfs tmpfs 294M 72K 294M 1% /run/user/1000
/dev/sda1 fuseblk 115G 36G 80G 31% /mnt/boot-sav/sda1
/dev/sda2 fuseblk 91G 63G 28G 70% /mnt/boot-sav/sda2
=================== fdisk -l:
Disk /dev/ram0: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram1: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram2: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram3: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram4: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram5: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram6: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram7: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram8: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram9: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram10: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram11: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram12: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram13: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram14: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/ram15: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/sda: 232.9 GiB, 250059350016 bytes, 488397168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x00000001
Device Boot Start End Sectors Size Id Type
/dev/sda1 * 2048 240432505 240430458 114.7G 7 HPFS/NTFS/exFAT
/dev/sda2 298953584 488392538 189438955 90.3G 7 HPFS/NTFS/exFAT
/dev/sda3 240433150 298952703 58519554 27.9G 5 Extended
/dev/sda5 240433152 292804607 52371456 25G 83 Linux
/dev/sda6 292806656 298952703 6146048 3G 82 Linux swap / Solaris
Partition table entries are not in disk order.
=================== Suggested repair
The default repair of the Boot-Repair utility would purge (in order to) and reinstall the grub2 of sda5 into the MBR of sda.
Additional repair would be performed: unhide-bootmenu-10s
=================== Final advice in case of suggested repair
Les fichiers de démarrage de [L'OS actuellement utilisé - Ubuntu 16.04.2 LTS] sont loin du début du disque. Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer après avoir créé une partition /boot (EXT4, >200MB, en début de disque). Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition via l'option [Partition /boot séparée :] de [Boot-Repair]. (http://doc.ubuntu-fr.org/tutoriel/partition_boot)
=================== User settings
The settings chosen by the user will not act on the boot.
paste.ubuntu.com ko (), using paste.debian
paste.debian.net ko (), using paste2
Tout me parait correct là-dedans.
Par contre, je suis un peu surpris par ceci que tu as noté dans le post #19 : "Pour ce qui est du temps que met Win7 pour arriver à l'écran de connexion de session est d'environ "une minute"". Ce qui me surprend c'est que tu as indiqué dans le post #16 : "Win7, plus rapide en ouverture". J'en avais compris que Win7 démarrait plus vite que Ubuntu. Or pour arriver à l'écran de connexion de session, tu déclares que c'est une "minute" pour Win7 et dans le post #5 tu as écrit que c'est une minute aussi pour Ubuntu. C'est à dire à peu près le même temps. C'est peut-être moi qui ai mal compris "Win7, plus rapide en ouverture". Dans ce cas, peux-tu expliquer ?
Hors ligne
#21 Le 14/02/2017, à 11:58
- ralphscorff
Re : [résolu]Lenteur ouverture Ubuntu 16.04, dual boot S...
Lorsque j'étais sous Ubuntu 14.04, la session d'ouverture était très rapide, c'est peut-être juste une comparaison stupide.
Si tout te semble normal malbo, je clôture mon post et encore merci du suivi.
Bonne journée.
Hors ligne
#22 Le 14/02/2017, à 12:12
- malbo
Re : [résolu]Lenteur ouverture Ubuntu 16.04, dual boot S...
Il n'y a rien de stupide dans ce que tu as écrit jusqu'ici. Je craignais simplement de mal comprendre certains passages. Et pour tout dire, ce que je trouvais stupide c'est ma question du post #15 : dans mon ordi, j'ai comparé le temps de démarrage jusqu'à l'écran de connexion de Windows 7 et de Ubuntu 16.04. Je trouve 20 secondes pour Win7 et 40 secondes pour Ubuntu 16.04. Ce n'est pas pour autant que je considère que le temps de démarrage de 16.04 est inacceptable : en comparant un système d'exploitation en fin de vie (Win7) avec un qui est tout jeune comme Ubuntu 16.04, on n'apprend pas grand chose et je regrettais ma question...
EDIT : j'ai encore proféré des conneries : Windows 10 démarre chez moi en 20 secondes, exactement comme Win7 (oui, j'ai les deux dans le même ordi). Ce n'est donc pas une question d'âge.
Dernière modification par malbo (Le 14/02/2017, à 12:40)
Hors ligne
#23 Le 14/02/2017, à 12:20
- ralphscorff
Re : [résolu]Lenteur ouverture Ubuntu 16.04, dual boot S...
Non c'est parfait malbo, comme suivi à des question spas forcement facile, rien à dire.
Pour l'instant je vais essayer de m'habituer à cette version et on verra dans le temps.Mais pour le moment elle a l'air d’être stable sur mon système.
Merci beaucoup malbo et je clôture.
Je reviendrai certainement avec d'autres questions.......:)
Hors ligne
Pages : 1