Pages : 1
#1 Le 07/05/2017, à 19:47
- Pixin
Installation impossible
Bonsoir,
tout d'abord, il est possible que j'ai fait beaucoup de chose sans nécessairement avoir conscience des conséquences que cela pouvait engendrer.
W# ne fonctionnait plus sur mon ordinateur, même après plusieurs tentatives de réinstallation. Mon dual boot Ubuntu fonctionnait, mais possédait assez peu d'espace dans sa partition.
J'ai donc décidé de supprimer toutes les partitions de W# (depuis "Disques" de Ubuntu), puis de réinstaller Ubuntu en lui attribuant une plus grande partition.
J'ai donc utilisé une live-USB, et lors de l’installation, je chois de supprimer toutes les données sur le disque dur et d'installer Ubuntu.
L'installation prend alors un certain temps, et se termine alors sur un message d'erreur :
subprocess installed post-installation script returned error exit status 2
.
N'ayant pas le choix, j'appuie sur valider et j'obtiens :
Une erreur est survenue lors de l'installation des paquets : E:Sub-process /usr/bin/dpkg returned an error code (1)
Les paquets suivants sont cassés :Ceci peut-être dû à l'utilisation d'une ancienne image de l'installateur, ou bien à un bogue dans certains paquets listés ci-dessus. Des plus amples renseignements se trouvent dans /var/log/syslog. L'installateur va essayer de poursuivre malgré tout, [...] Vous devriez d'abord chercher une version plus récente de l'image de l'installateur, ou le cas échéant, signaler ce problème à votre revendeur.
Après validation, cela me renvoie sur un écran noir où je peux rentrer du texte. Ne sachant que faire, j'essaye de rentrer "shutdown", "help", ça ne fait rien, j'éteins donc mon ordinateur avec le bouton Power et je retente une installation. Elle plante au bout de trèèèèèèèèèèès longtemps, et me renvoie :
(ici on me dit que ça a planté, pas d'infos)
, puis
The system log from your installation contains an error. The specific error commonly occurs when there is an issue with the disk to which you are trying to install Ubuntu. It is recommended that you back up [...]
Là le pc s'est éteint de lui même, j'ai fais un "check disks" depuis la live-USB, et tout semble normal, et j'ai pu boot sur la clé, c'est de là d'où je cous parle.
Quelqu'un aurait-il une idée ?
Merci d'avance,
Pixin.
Hors ligne
#2 Le 07/05/2017, à 21:31
- Bougron
Re : Installation impossible
Bonsoir
Fais un rapport bisnext. https://doc.ubuntu-fr.org/bisnext
On va certainement dècouvrir que le disque est fichu et que windows ne savait pas te le dire.
et que maintenant que tu veux utiliser la partie fichue pour installer ubuntu, cela ne va pas mieux.
Dernière modification par Bougron (Le 08/05/2017, à 10:38)
Hors ligne
#3 Le 08/05/2017, à 02:36
- Pixin
Re : Installation impossible
Bonsoir,
ci-joint le lien du rapport bisnext : Ici
et ici je colle le rapport :
May 8 2017, bisnext report id 7243b also available at https://paste.debian.net/931242/
bisnext 0.02
============================ Hardware and System Summary ======================
System: Kernel: 4.8.0-36-generic x86_64 (64 bit gcc: 5.4.0)
Desktop: N/A dm: lightdm Distro: Ubuntu 16.04.2 LTS
Machine: Device: laptop System: ASUSTeK product: G56JR v: 1.0
Mobo: ASUSTeK model: G56JR v: 1.0
UEFI: American Megatrends v: G56JR.201 date: 02/11/2014
Battery BAT0: charge: 49.1 Wh 100.0% condition: 49.1/48.8 Wh (100%)
volts: 11.1/11.1
model: ASUSTeK N56-52 status: Discharging
CPU: Quad core Intel Core i7-4700HQ (-HT-MCP-) cache: 6144 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 19157
clock speeds: min/max: 800/3400 MHz 1: 2400 MHz 2: 2399 MHz
3: 2607 MHz 4: 2779 MHz 5: 2400 MHz 6: 2400 MHz 7: 2399 MHz
8: 2400 MHz
Memory: Array-1 capacity: 32 GB devices: 4 EC: None
Device-1: ChannelA-DIMM0 size: 4 GB speed: 1600 MHz type: DDR3
manufacturer: Kingston part: ASU16D3LS1KBG/4G
Device-2: ChannelA-DIMM1 size: No Module Installed type: N/A
Device-3: ChannelB-DIMM0 size: 4 GB speed: 1600 MHz type: DDR3
manufacturer: Kingston part: ASU16D3LS1KBG/4G
Device-4: ChannelB-DIMM1 size: No Module Installed type: N/A
Graphics: Card-1: Intel 4th Gen Core Processor Integrated Graphics Controller
bus-ID: 00:02.0 chip-ID: 8086:0416
Card-2: NVIDIA GK106M [GeForce GTX 760M]
bus-ID: 01:00.0 chip-ID: 10de:11e3
Display Server: X.Org 1.18.4 drivers: (unloaded: fbdev,vesa) FAILED: modesetting,nouveau
tty size: 1920x1080@60.10hz
GLX Renderer: Mesa DRI Intel Haswell Mobile
GLX Version: 3.0 Mesa 12.0.6 Direct Rendering: Yes
Audio: Card-1 Intel 8 Series/C220 Series High Definition Audio Controller
driver: snd_hda_intel bus-ID: 00:1b.0 chip-ID: 8086:8c20
Card-2 Intel Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller
driver: snd_hda_intel bus-ID: 00:03.0 chip-ID: 8086:0c0c
Sound: Advanced Linux Sound Architecture v: k4.8.0-36-generic
Network: Card-1: Qualcomm Atheros AR9485 Wireless Network Adapter
driver: ath9k bus-ID: 03:00.0 chip-ID: 168c:0032
IF: wlp3s0 state: down mac: <filter>
Card-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
driver: r8169 v: 2.3LK-NAPI port: d000
bus-ID: 04:00.0 chip-ID: 10ec:8168
IF: enp4s0 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives: HDD Total Size: 765.8GB (1.1% used)
ID-1: /dev/sda model: HGST_HTS721075A9 size: 750.2GB
ID-2: USB /dev/sdb model: Cruzer_Blade size: 15.6GB
Optical: /dev/sr0 model: MATSHITA DVD-RAM UJ8E1
rev: 1.00 dev-links: cdrom,cdrw,dvd,dvdrw
Features: speed: 24x multisession: yes
audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
Partition: ID-1: swap-1 size: 8.47GB used: 0.00GB (0%) fs: swap dev: /dev/sda3
label: N/A uuid: f73efb88-6272-4289-90c1-8c35025e59e1
RAID: System: supported: N/A
No RAID devices: /proc/mdstat, md_mod kernel module present
Unused Devices: none
Unmounted: ID-1: /dev/ram0 size: 0.07G label: N/A uuid: N/A
ID-2: /dev/ram1 size: 0.07G label: N/A uuid: N/A
ID-3: /dev/ram2 size: 0.07G label: N/A uuid: N/A
ID-4: /dev/ram3 size: 0.07G label: N/A uuid: N/A
ID-5: /dev/ram4 size: 0.07G label: N/A uuid: N/A
ID-6: /dev/ram5 size: 0.07G label: N/A uuid: N/A
ID-7: /dev/ram6 size: 0.07G label: N/A uuid: N/A
ID-8: /dev/ram7 size: 0.07G label: N/A uuid: N/A
ID-9: /dev/ram8 size: 0.07G label: N/A uuid: N/A
ID-10: /dev/ram9 size: 0.07G label: N/A uuid: N/A
ID-11: /dev/ram10 size: 0.07G label: N/A uuid: N/A
ID-12: /dev/ram11 size: 0.07G label: N/A uuid: N/A
ID-13: /dev/ram12 size: 0.07G label: N/A uuid: N/A
ID-14: /dev/ram13 size: 0.07G label: N/A uuid: N/A
ID-15: /dev/ram14 size: 0.07G label: N/A uuid: N/A
ID-16: /dev/ram15 size: 0.07G label: N/A uuid: N/A
ID-17: /dev/sda1 size: 0.54G
fs: FAT (32 bit) label: N/A uuid: 9B6E-8B2C
ID-18: /dev/sda2 size: 741.15G
fs: ext4 label: N/A uuid: 4ee5a20c-e505-44a7-be35-29a2bd9b0716
ID-19: /dev/sdb1 size: 1.55G
label: Ubuntu 16.04.2 LTS amd64 uuid: 2017-02-15-21-44-13-00
ID-20: /dev/sdb2 size: 0.00G
fs: FAT (12 bit) label: N/A uuid: E561-C446
Sensors: None detected - is lm-sensors installed and configured?
Repos: Active apt sources in file: /etc/apt/sources.list
deb cdrom:[Ubuntu 16.04.2 LTS _Xenial Xerus_ - Release amd64 (20170215.2)]/ xenial main restricted universe multiverse
deb http://archive.ubuntu.com/ubuntu/ xenial main restricted universe multiverse
deb http://security.ubuntu.com/ubuntu/ xenial-security main restricted universe multiverse
deb http://archive.ubuntu.com/ubuntu/ xenial-updates main restricted universe multiverse
Processes: CPU: % used - Memory: MB / % used - top 10 active
1: cpu: 4.1% command: firefox pid: 2664 mem: 266.51MB (3.3%)
2: cpu: 2.6% command: plugin-container pid: 2953 mem: 180.46MB (2.2%)
3: cpu: 2.0% command: compiz pid: 2285 mem: 227.33MB (2.8%)
4: cpu: 1.5% command: Xorg pid: 1797 mem: 97.11MB (1.2%)
5: cpu: 1.5% command: init pid: 1 mem: 5.78MB (0.0%)
6: cpu: 0.5% command: gnome-terminal-server pid: 3023 mem: 34.21MB (0.4%)
7: cpu: 0.4% command: nautilus pid: 2326 mem: 48.42MB (0.6%)
8: cpu: 0.4% daemon: ~kworker/0:3~ pid: 1284 mem: 0.00MB (0.0%)
9: cpu: 0.3% command: bash pid: 5592 mem: 4.39MB (0.0%)
10: cpu: 0.3% command: sudo pid: 5591 mem: 4.30MB (0.0%)
Memory: MB / % used - CPU: % used - top 10 active
1: mem: 266.51MB (3.3%) command: firefox pid: 2664 cpu: 4.1%
2: mem: 227.33MB (2.8%) command: compiz pid: 2285 cpu: 2.0%
3: mem: 180.46MB (2.2%) command: plugin-container pid: 2953 cpu: 2.6%
4: mem: 97.11MB (1.2%) command: Xorg pid: 1797 cpu: 1.5%
5: mem: 58.25MB (0.7%) command: evolution-calendar-factory pid: 2301 cpu: 0.1%
6: mem: 52.84MB (0.6%) command: evolution-calendar-factory-subprocess pid: 2391 cpu: 0.0%
7: mem: 48.68MB (0.6%) command: evolution-calendar-factory-subprocess pid: 2416 cpu: 0.0%
8: mem: 48.42MB (0.6%) command: nautilus pid: 2326 cpu: 0.4%
9: mem: 35.88MB (0.4%) command: nm-applet pid: 2325 cpu: 0.1%
10: mem: 34.21MB (0.4%) command: gnome-terminal-server pid: 3023 cpu: 0.5%
Info: Processes: 277 Uptime: 5 min Memory: 1046.3/7866.3MB
Init: systemd v: 229 runlevel: 5 default: 2 Gcc sys: 5.4.0
Client: Shell (bash 4.3.461 running in bash) inxi: 2.3.8
_______________________________ UEFI settings _________________________________
Computer booted in UEFI mode for this session.
BootCurrent: 0002
Timeout: 2 seconds
BootOrder: 0002,0000,0001
Boot0000* ubuntu HD(1,GPT,f6008055-2586-49c5-ad6a-bf0bbdd03c9d,0x800,0x100000)/File(\EFI\ubuntu\shimx64.efi)
Boot0001* ubuntu HD(1,GPT,f6008055-2586-49c5-ad6a-bf0bbdd03c9d,0x800,0x100000)/File(\EFI\Ubuntu\grubx64.efi)
Boot0002* UEFI: SanDisk PciRoot(0x0)/Pci(0x1d,0x0)/USB(1,0)/USB(3,0)/HD(1,MBR,0x61,0x3860,0x1300)..BO
vfat partitions details:
/dev/sda1: UUID="9B6E-8B2C" TYPE="vfat" PARTLABEL="EFI System Partition" PARTUUID="f6008055-2586-49c5-ad6a-bf0bbdd03c9d"
/dev/sdb2: SEC_TYPE="msdos" UUID="E561-C446" TYPE="vfat" PARTUUID="15e2543d-02"
__________________________________ Secure Boot ________________________________
Secure Boot disabled or not available on this system.
__________________________________ OS prober ________________________________
/dev/sda2:Ubuntu 16.04.2 LTS (16.04):Ubuntu:linux
_____________________________ md5sum of EFI files _____________________________
EFI files in /dev/sda1:
d73bbea8b6c047d2a706472f87d3ccdb /EFI/ubuntu/fwupx64.efi
34a5c2687e10f4cad35391d68ff32a6c /EFI/ubuntu/grubx64.efi
3aef9c72ad50faa8db576c01f85a0915 /EFI/ubuntu/shimx64.efi
bf39cf9416a9403d40a9b69541486e74 /EFI/ubuntu/mmx64.efi
61c7898dd613614b15cee0081226572c /EFI/ubuntu/fbx64.efi
========================= Boot Information Details ============================
=> No boot loader is installed in the MBR of /dev/sda.
=> No known boot loader is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /EFI/ubuntu/fwupx64.efi /EFI/ubuntu/grubx64.efi
/EFI/ubuntu/shimx64.efi /EFI/ubuntu/mmx64.efi
/EFI/ubuntu/fbx64.efi
sda2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 16.04.2 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
sda3: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdb1: __________________________________________________________________________
File system: iso9660
Boot sector type: Unknown
Boot sector info:
Mounting failed: mount: /dev/sdb1 is already mounted or /tmp/bisnext-WURSLx0i/sdb1 busy
sdb2: __________________________________________________________________________
File system: vfat
Boot sector type: FAT16
Boot sector info: According to the info in the boot sector, sdb2 starts
at sector 0. But according to the info from fdisk,
sdb2 starts at sector 14432. According to the info in
the boot sector, sdb2 has 0 sectors.
Mounting failed: mount: /dev/sdb1 is already mounted or /tmp/bisnext-WURSLx0i/sdb1 busy
mount: /dev/sdb2 is already mounted or /tmp/bisnext-WURSLx0i/sdb2 busy
_________________________=== Drive/Partition Info ===__________________________
Drive: sda _____________________________________________________________________
Disk /dev/sda: 698.7 GiB, 750156374016 bytes, 1465149168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 1,465,149,167 1,465,149,167 ee GPT
GUID Partition Table detected.
Partition Attrs Start Sector End Sector # of Sectors System
/dev/sda1 2,048 1,050,623 1,048,576 EFI System partition
/dev/sda2 1,050,624 1,448,611,839 1,447,561,216 Data partition (Linux)
/dev/sda3 1,448,611,840 1,465,147,391 16,535,552 Swap partition (Linux)
Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 14.5 GiB, 15597568000 bytes, 30464000 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 0 3,035,519 3,035,520 0 Empty
/dev/sdb2 14,432 19,295 4,864 ef EFI (FAT-12/16/32)
/dev/sdb1 overlaps with /dev/sdb2
GUID Partition Table detected, but does not seem to be used.
Partition Attrs Start Sector End Sector # of Sectors System
/dev/sdb1 + R 0 3,035,463 3,035,464 Data partition (Windows/Linux)
/dev/sdb2 + R 14,432 19,295 4,864 Data partition (Windows/Linux)
Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 9B6E-8B2C vfat
/dev/sda2 4ee5a20c-e505-44a7-be35-29a2bd9b0716 ext4
/dev/sda3 f73efb88-6272-4289-90c1-8c35025e59e1 swap
/dev/sdb1 2017-02-15-21-44-13-00 iso9660 Ubuntu 16.04.2 LTS amd64
/dev/sdb2 E561-C446 vfat
_________________________ "ls -l /dev/disk/by_id" output ______________________
total 0
lrwxrwxrwx 1 root root 9 May 8 00:17 ata-HGST_HTS721075A9E630_JR13006RG0PS9E -> ../../sda
lrwxrwxrwx 1 root root 10 May 8 00:17 ata-HGST_HTS721075A9E630_JR13006RG0PS9E-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 May 8 00:17 ata-HGST_HTS721075A9E630_JR13006RG0PS9E-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 May 8 00:17 ata-HGST_HTS721075A9E630_JR13006RG0PS9E-part3 -> ../../sda3
lrwxrwxrwx 1 root root 9 May 8 00:17 ata-MATSHITA_DVD-RAM_UJ8E1_1412TP209167ESR6H -> ../../sr0
lrwxrwxrwx 1 root root 9 May 8 00:17 usb-SanDisk_Cruzer_Blade_4C530001210721100314-0:0 -> ../../sdb
lrwxrwxrwx 1 root root 10 May 8 00:17 usb-SanDisk_Cruzer_Blade_4C530001210721100314-0:0-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 May 8 00:17 usb-SanDisk_Cruzer_Blade_4C530001210721100314-0:0-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 9 May 8 00:17 wwn-0x5000cca6aac051a7 -> ../../sda
lrwxrwxrwx 1 root root 10 May 8 00:17 wwn-0x5000cca6aac051a7-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 May 8 00:17 wwn-0x5000cca6aac051a7-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 May 8 00:17 wwn-0x5000cca6aac051a7-part3 -> ../../sda3
________________________________ Mount points _________________________________
Device Mount_Point Type Options
/dev/sdb /cdrom iso9660 (ro,noatime)
/dev/loop0 /rofs squashfs (ro,noatime)
_______________________________ Free disk space _______________________________
Filesystem Mounted on Type Size Used Avail Use% IUse%
aufs / aufs 3.9G 203M 3.7G 6% 1%
/dev/loop0 /rofs squashfs 1.4G 1.4G 0 100% 100%
/dev/sdb /cdrom iso9660 1.5G 1.5G 0 100% -
__________________________=== Boot Files Content ===___________________________
___________________________ sda2/boot/grub/grub.cfg: ___________________________
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/10_linux ###
--- Notice bisnext removed top of file content from the report for readability
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-4ee5a20c-e505-44a7-be35-29a2bd9b0716' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 4ee5a20c-e505-44a7-be35-29a2bd9b0716
else
search --no-floppy --fs-uuid --set=root 4ee5a20c-e505-44a7-be35-29a2bd9b0716
fi
linux /boot/vmlinuz-4.8.0-51-generic.efi.signed root=UUID=4ee5a20c-e505-44a7-be35-29a2bd9b0716 ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.8.0-51-generic
}
--- Notice bisnext removed the submenu section from the report for readability
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
_______________________________ sda2/etc/fstab: ________________________________
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda2 during installation
UUID=4ee5a20c-e505-44a7-be35-29a2bd9b0716 / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda1 during installation
UUID=9B6E-8B2C /boot/efi vfat umask=0077 0 1
# swap was on /dev/sda3 during installation
UUID=f73efb88-6272-4289-90c1-8c35025e59e1 none swap sw 0 0
____________________________ sda2/etc/default/grub: ____________________________
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
===============================================================================
Running System Information
===============================================================================
______________________________ Kernel parameters ______________________________
BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---
_______________________________ Wireless Status _______________________________
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
1: asus-wlan: Wireless LAN
Soft blocked: no
Hard blocked: no
2: asus-bluetooth: Bluetooth
Soft blocked: yes
Hard blocked: no
_________________________________ USB devices __________________________________
Bus 002 Device 002: ID 8087:8000 Intel Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8008 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 005: ID 1bcf:2883 Sunplus Innovation Technology Inc.
Bus 003 Device 003: ID 0781:5567 SanDisk Corp. Cruzer Blade
Bus 003 Device 002: ID 413c:3016 Dell Computer Corp. Optical 5-Button Wheel Mouse
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/14p, 480M
|__ Port 1: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 3: Dev 3, If 0, Class=Mass Storage, Driver=usb-storage, 480M
|__ Port 7: Dev 5, If 0, Class=Video, Driver=uvcvideo, 480M
|__ Port 7: Dev 5, If 1, Class=Video, Driver=uvcvideo, 480M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/8p, 480M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/6p, 480M
______________________________ Boot-up Statistics ______________________________
Startup finished in 5.670s (firmware) + 4.564s (loader) + 11.348s (kernel) + 3.081s (userspace) = 24.665s
blame, first 10:
dev-sda3.device 1.315s
dev-sdb.device 1.287s
dev-loop0.device 1.223s
lvm2-monitor.service 1.217s
ModemManager.service 864ms
NetworkManager.service 835ms
accounts-daemon.service 694ms
apparmor.service 599ms
plymouth-read-write.service 597ms
thermald.service 557ms
critical-chain:
The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.
1 graphical.target @2.991s
2 multi-user.target @2.991s
3 getty.target @2.990s
4 getty@tty1.service @2.990s
5 rc-local.service @2.983s +2ms
6 network.target @2.950s
7 NetworkManager.service @2.115s +835ms
8 dbus.service @2.074s
9 basic.target @2.072s
10 sockets.target @2.072s
11 snapd.socket @2.069s +602us
12 sysinit.target @2.068s
13 apparmor.service @1.448s +599ms
14 local-fs.target @1.448s
15 tmp.mount @1.432s +4ms
16 local-fs-pre.target @1.390s
17 lvm2-monitor.service @172ms +1.217s
18 lvm2-lvmetad.service @355ms
19 system.slice @152ms
20 -.slice @151ms
___________________________________ Modules Loaded ____________________________
Module Size Used by
ablk_helper 16384 1 aesni_intel
aesni_intel 167936 0
aes_x86_64 20480 1 aesni_intel
ahci 36864 2
arc4 16384 2
asus_nb_wmi 24576 0
asus_wireless 16384 0
asus_wmi 28672 1 asus_nb_wmi
ath 32768 3 ath9k_hw,ath9k,ath9k_common
ath3k 20480 0
ath9k 147456 0
ath9k_common 36864 1 ath9k
ath9k_hw 475136 2 ath9k,ath9k_common
aufs 241664 5375
autofs4 40960 2
bluetooth 557056 12 btrtl,btintel,bnep,btbcm,ath3k,btusb
bnep 20480 2
btbcm 16384 1 btusb
btintel 16384 1 btusb
btrfs 1056768 0
btrtl 16384 1 btusb
btusb 45056 0
cfg80211 581632 4 mac80211,ath9k,ath,ath9k_common
coretemp 16384 0
crc32_pclmul 16384 0
crct10dif_pclmul 16384 0
cryptd 24576 3 ablk_helper,ghash_clmulni_intel,aesni_intel
dm_log 20480 2 dm_mirror,dm_region_hash
dm_mirror 24576 0
dm_region_hash 24576 1 dm_mirror
drm 368640 9 nouveau,i915,ttm,drm_kms_helper
drm_kms_helper 167936 2 nouveau,i915
edac_core 53248 1 ie31200_edac
fb_sys_fops 16384 1 drm_kms_helper
fjes 28672 0
ghash_clmulni_intel 16384 0
glue_helper 16384 1 aesni_intel
hfs 57344 0
hfsplus 106496 0
hid 122880 2 hid_generic,usbhid
hid_generic 16384 0
i2c_algo_bit 16384 2 nouveau,i915
i915 1310720 99
ie31200_edac 16384 0
input_leds 16384 0
intel_cstate 16384 0
intel_rapl 20480 0
intel_rapl_perf 16384 0
irqbypass 16384 1 kvm
isofs 40960 1
jfs 184320 0
joydev 20480 0
kvm 598016 1 kvm_intel
kvm_intel 192512 0
libahci 32768 1 ahci
libcrc32c 16384 1 xfs
lp 20480 0
lpc_ich 24576 0
lrw 16384 1 aesni_intel
mac80211 761856 1 ath9k
mac_hid 16384 0
media 40960 2 uvcvideo,videodev
mei 102400 1 mei_me
mei_me 40960 0
memstick 20480 1 rtsx_pci_ms
mii 16384 1 r8169
minix 40960 0
msdos 20480 0
mxm_wmi 16384 1 nouveau
nls_iso8859_1 16384 0
nls_utf8 16384 1
nouveau 1572864 1
ntfs 102400 0
parport 49152 3 lp,parport_pc,ppdev
parport_pc 32768 0
ppdev 20480 0
psmouse 139264 0
qnx4 16384 0
r8169 81920 0
raid6_pq 102400 1 btrfs
rtsx_pci 57344 2 rtsx_pci_sdmmc,rtsx_pci_ms
rtsx_pci_ms 20480 0
rtsx_pci_sdmmc 24576 0
serio_raw 16384 0
shpchp 36864 0
snd 86016 21 snd_hda_intel,snd_hwdep,snd_seq,snd_hda_codec,snd_timer,snd_rawmidi,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_seq_device,snd_hda_codec_realtek,snd_pcm
snd_hda_codec 135168 4 snd_hda_intel,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hda_codec_generic 73728 1 snd_hda_codec_realtek
snd_hda_codec_hdmi 45056 1
snd_hda_codec_realtek 86016 1
snd_hda_core 86016 5 snd_hda_intel,snd_hda_codec,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hda_intel 36864 5
snd_hwdep 16384 1 snd_hda_codec
snd_pcm 110592 4 snd_hda_intel,snd_hda_codec,snd_hda_core,snd_hda_codec_hdmi
snd_rawmidi 32768 1 snd_seq_midi
snd_seq 69632 2 snd_seq_midi_event,snd_seq_midi
snd_seq_device 16384 3 snd_seq,snd_rawmidi,snd_seq_midi
snd_seq_midi 16384 0
snd_seq_midi_event 16384 1 snd_seq_midi
snd_timer 32768 2 snd_seq,snd_pcm
soundcore 16384 1 snd
sparse_keymap 16384 1 asus_wmi
syscopyarea 16384 1 drm_kms_helper
sysfillrect 16384 1 drm_kms_helper
sysimgblt 16384 1 drm_kms_helper
ttm 102400 1 nouveau
uas 24576 0
ufs 73728 0
usbhid 53248 0
usb_storage 73728 2 uas
uvcvideo 90112 0
video 40960 3 asus_wmi,nouveau,i915
videobuf2_core 40960 2 uvcvideo,videobuf2_v4l2
videobuf2_memops 16384 1 videobuf2_vmalloc
videobuf2_v4l2 24576 1 uvcvideo
videobuf2_vmalloc 16384 1 uvcvideo
videodev 180224 3 uvcvideo,videobuf2_core,videobuf2_v4l2
wmi 16384 3 asus_wmi,mxm_wmi,nouveau
x86_pkg_temp_thermal 16384 0
xfs 1048576 0
xor 24576 1 btrfs
______________________________ Additional Drivers _____________________________
== /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0 ==
vendor : NVIDIA Corporation
modalias : pci:v000010DEd000011E3sv00001043sd000022CAbc03sc02i00
model : GK106M [GeForce GTX 760M]
driver : nvidia-340 - distro non-free
driver : xserver-xorg-video-nouveau - distro free builtin
driver : nvidia-375 - distro non-free recommended
== cpu-microcode.py ==
driver : intel-microcode - distro non-free
__________________________________ Locales ___________________________________
locale command output:
LANG=en_US.UTF-8
LANGUAGE=
LC_CTYPE="en_US.UTF-8"
LC_NUMERIC="en_US.UTF-8"
LC_TIME="en_US.UTF-8"
LC_COLLATE="en_US.UTF-8"
LC_MONETARY="en_US.UTF-8"
LC_MESSAGES="en_US.UTF-8"
LC_PAPER="en_US.UTF-8"
LC_NAME="en_US.UTF-8"
LC_ADDRESS="en_US.UTF-8"
LC_TELEPHONE="en_US.UTF-8"
LC_MEASUREMENT="en_US.UTF-8"
LC_IDENTIFICATION="en_US.UTF-8"
LC_ALL=
/etc/default/locale:
LANG="en_US.UTF-8"
Active keyboard layout:
rules: evdev
model: pc105
layout: fr
Default keyboard layout:
XKBMODEL="pc105"
XKBLAYOUT="us"
XKBVARIANT=""
XKBOPTIONS=""
BACKSPACE="guess"
_____________________________ Upgradable Packages _____________________________
Live Session
________________________ Package Configuration Pending ________________________
None
__________________________ Package Installation Pending _______________________
Reading package lists...
Building dependency tree...
Reading state information...
0 upgraded, 0 newly installed, 0 to remove and 202 not upgraded.
_________________________ Kernel Packages Installed __________________________
Package Version
linux-generic-hwe-16.04 4.8.0.36.8
linux-headers-4.8.0-36 4.8.0-36.36~16.04.1
linux-headers-4.8.0-36-generic 4.8.0-36.36~16.04.1
linux-headers-generic-hwe-16.04 4.8.0.36.8
linux-image-4.8.0-36-generic 4.8.0-36.36~16.04.1
linux-image-extra-4.8.0-36-generic 4.8.0-36.36~16.04.1
linux-image-generic-hwe-16.04 4.8.0.36.8
linux-signed-generic-hwe-16.04 4.8.0.36.8
linux-signed-image-4.8.0-36-generic 4.8.0-36.36~16.04.1
linux-signed-image-generic-hwe-16.04 4.8.0.36.8
File list in /boot directory:
abi-4.8.0-36-generic
config-4.8.0-36-generic
grub
memtest86+.bin
memtest86+.elf
memtest86+_multiboot.bin
System.map-4.8.0-36-generic
_________________________________ System Logs ________________________________
Failed services:
0 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.
Selection of relevent log entries:
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ACPI 2.0=0xc9ec9000 ACPI=0xc9ec9000 SMBIOS=0xcaf57418
[ 0.130380] Error parsing PCC subspaces from PCCT
[ 0.152318] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.157439] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.215818] ACPI : EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[ 0.216031] SCSI subsystem initialized
[ 4.176294] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 4.177057] efifb: probing for efifb
[ 4.177071] efifb: framebuffer at 0xd0000000, using 8128k, total 8128k
[ 4.177071] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[ 4.177072] efifb: scrolling: redraw
[ 4.177072] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 4.182924] fb0: EFI VGA frame buffer device
[ 4.239179] EFI Variables Facility v0.08 2004-May-17
[ 4.305775] scsi host0: ahci
[ 4.305845] scsi host1: ahci
[ 4.305901] scsi host2: ahci
[ 4.305956] scsi host3: ahci
[ 4.306010] scsi host4: ahci
[ 4.330587] fb: switching to inteldrmfb from EFI VGA
[ 4.332662] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)
[ 4.332700] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)
[ 4.332881] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power,
[ 4.374668] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 4.620097] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 4.620268] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.623655] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 4.623657] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 4.623658] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 4.629550] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 4.629552] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 4.629553] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 4.632002] scsi 2:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8E1 1.00 PQ: 0 ANSI: 5
[ 4.658917] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.659047] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 4.659129] sr 2:0:0:0: Attached scsi generic sg0 type 5
[ 4.659354] scsi 4:0:0:0: Direct-Access ATA HGST HTS721075A9 A3J0 PQ: 0 ANSI: 5
[ 4.729472] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 4.729491] sd 4:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/699 GiB)
[ 4.772763] sd 4:0:0:0: [sda] Attached SCSI disk
[ 4.972491] scsi host5: usb-storage 3-3:1.0
[ 5.032662] psmouse serio4: elantech: assuming hardware version 4 (with firmware version 0x461f07)
[ 5.989784] scsi 5:0:0:0: Direct-Access SanDisk Cruzer Blade 1.00 PQ: 0 ANSI: 6
[ 6.005292] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 6.005497] sd 5:0:0:0: [sdb] 30464000 512-byte logical blocks: (15.6 GB/14.5 GiB)
[ 6.009614] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[ 11.780794] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)
[ 11.781125] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
[ 11.781128] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)
[ 20.836100] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)
[ 20.836431] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
[ 20.836436] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)
[ 313.044825] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)
[ 313.045171] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
[ 313.045176] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)
_____________________________________ Xorg ____________________________________
xinput:
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ Dell Premium USB Optical Mouse id=11 [slave pointer (2)]
⎜ ↳ ETPS/2 Elantech Touchpad id=15 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Power Button id=6 [slave keyboard (3)]
↳ Asus Wireless Radio Control id=7 [slave keyboard (3)]
↳ Video Bus id=8 [slave keyboard (3)]
↳ Video Bus id=9 [slave keyboard (3)]
↳ Sleep Button id=10 [slave keyboard (3)]
↳ ASUS USB2.0 Webcam id=12 [slave keyboard (3)]
↳ Asus WMI hotkeys id=13 [slave keyboard (3)]
↳ AT Translated Set 2 keyboard id=14 [slave keyboard (3)]
xrandr:
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192
eDP-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 344mm x 194mm
1920x1080 60.10*+ 59.93
1680x1050 59.95 59.88
1600x1024 60.17
1400x1050 59.98
1280x1024 60.02
1440x900 59.89
1280x960 60.00
1360x768 59.80 59.96
1152x864 60.00
1024x768 60.04 60.00
960x720 60.00
928x696 60.05
896x672 60.01
960x600 60.00
960x540 59.99
800x600 60.00 60.32 56.25
840x525 60.01 59.88
800x512 60.17
700x525 59.98
640x512 60.02
720x450 59.89
640x480 60.00 59.94
680x384 59.80 59.96
576x432 60.06
512x384 60.00
400x300 60.32 56.34
320x240 60.05
VGA-1 disconnected (normal left inverted right x axis y axis)
HDMI-1 disconnected (normal left inverted right x axis y axis)
Selection of relevent log entries:
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 14.477] (==) No Layout section. Using the first Screen section.
[ 14.477] (==) No screen section available. Using defaults.
[ 14.477] (**) |-->Screen "Default Screen Section" (0)
[ 14.477] (**) | |-->Monitor "<default monitor>"
[ 14.477] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 14.502] (--) PCI:*(0:0:2:0) 8086:0416:1043:22ca rev 6, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[ 14.502] (--) PCI: (0:1:0:0) 10de:11e3:1043:22ca rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 14.503] (II) LoadModule: "glx"
[ 14.503] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 14.591] (II) LoadModule: "nvidia"
[ 14.592] (WW) Warning, couldn't open module nvidia
[ 14.592] (II) UnloadModule: "nvidia"
[ 14.592] (EE) Failed to load module "nvidia" (module does not exist, 0)
[ 14.592] (II) LoadModule: "nouveau"
[ 14.592] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 14.605] (II) LoadModule: "modesetting"
[ 14.605] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 14.609] (II) LoadModule: "fbdev"
[ 14.610] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 14.623] (II) LoadModule: "vesa"
[ 14.623] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 14.623] (II) LoadModule: "nvidia"
[ 14.623] (WW) Warning, couldn't open module nvidia
[ 14.623] (II) UnloadModule: "nvidia"
[ 14.623] (EE) Failed to load module "nvidia" (module does not exist, 0)
[ 14.623] (II) LoadModule: "nouveau"
[ 14.623] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 14.623] (II) UnloadModule: "nouveau"
[ 14.623] (II) LoadModule: "modesetting"
[ 14.624] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 14.624] (II) UnloadModule: "modesetting"
[ 14.624] (II) LoadModule: "fbdev"
[ 14.624] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 14.624] (II) UnloadModule: "fbdev"
[ 14.624] (II) LoadModule: "vesa"
[ 14.624] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 14.624] (II) UnloadModule: "vesa"
[ 14.651] (WW) Falling back to old probe method for modesetting
[ 14.668] (WW) Falling back to old probe method for fbdev
[ 14.668] (II) Loading sub module "fbdevhw"
[ 14.668] (II) LoadModule: "fbdevhw"
[ 14.668] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 14.675] (WW) Falling back to old probe method for vesa
[ 14.675] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 14.675] (II) Loading sub module "glamoregl"
[ 14.675] (II) LoadModule: "glamoregl"
[ 14.675] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 14.869] (II) modeset(0): Output eDP-1 has no monitor section
[ 14.870] (II) modeset(0): Output VGA-1 has no monitor section
[ 14.871] (II) modeset(0): Output HDMI-1 has no monitor section
[ 14.874] (II) Loading sub module "fb"
[ 14.874] (II) LoadModule: "fb"
[ 14.875] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 14.876] (II) Loading sub module "dri2"
[ 14.876] (II) LoadModule: "dri2"
[ 14.876] (II) Loading sub module "fb"
[ 14.876] (II) LoadModule: "fb"
[ 14.876] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 14.877] (II) Loading sub module "shadowfb"
[ 14.877] (II) LoadModule: "shadowfb"
[ 14.877] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 14.878] (II) UnloadModule: "fbdev"
[ 14.878] (II) UnloadModule: "vesa"
[ 15.259] (II) Loading sub module "exa"
[ 15.259] (II) LoadModule: "exa"
[ 15.259] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 15.260] (II) EXA(256): Driver allocated offscreen pixmaps
[ 15.260] (II) UploadToScreen
[ 15.260] (II) DownloadFromScreen
[ 15.260] (EE) NOUVEAU(G0): [XvMC] Failed to initialize extension.
[ 15.373] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 15.417] (II) modeset(0): Setting screen physical size to 508 x 285
[ 15.516] (II) LoadModule: "evdev"
[ 15.516] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 15.586] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchscreen catchall"
[ 15.586] (II) LoadModule: "synaptics"
[ 15.587] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
GPU Manager logs:
log_file: /var/log/gpu-manager.log
last_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
new_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
can't access /run/u-d-c-nvidia-was-loaded file
can't access /run/u-d-c-fglrx-was-loaded file
Looking for fglrx modules in /lib/modules/4.8.0-36-generic/updates/dkms
Looking for nvidia modules in /lib/modules/4.8.0-36-generic/updates/dkms
Is nvidia loaded? no
Was nvidia unloaded? no
Is nvidia blacklisted? no
Is fglrx loaded? no
Was fglrx unloaded? no
Is fglrx blacklisted? no
Is intel loaded? yes
Is radeon loaded? no
Is radeon blacklisted? no
Is amdgpu loaded? no
Is amdgpu blacklisted? no
Is nouveau loaded? yes
Is nouveau blacklisted? no
Is fglrx kernel module available? no
Is nvidia kernel module available? no
Vendor/Device Id: 8086:416
BusID "PCI:0@0:2:0"
Is boot vga? yes
Vendor/Device Id: 10de:11e3
BusID "PCI:1@0:0:0"
Is boot vga? no
Skipping "/dev/dri/card1", driven by "nouveau"
Skipping "/dev/dri/card0", driven by "i915"
Skipping "/dev/dri/card1", driven by "nouveau"
Skipping "/dev/dri/card0", driven by "i915"
Found "/dev/dri/card1", driven by "nouveau"
Number of connected outputs for /dev/dri/card1: 0
Skipping "/dev/dri/card1", driven by "nouveau"
Found "/dev/dri/card0", driven by "i915"
output 0:
card0-eDP-1
Number of connected outputs for /dev/dri/card0: 1
Does it require offloading? yes
I couldn't open /var/lib/ubuntu-drivers-common/last_gfx_boot for reading.
Create /var/lib/ubuntu-drivers-common/last_gfx_boot for the 1st time
last cards number = 1
Has amd? no
Has intel? yes
Has nvidia? yes
How many cards? 2
The number of cards has changed!
Has the system changed? Yes
main_arch_path x86_64-linux-gnu, other_arch_path i386-linux-gnu
Current alternative: /usr/lib/x86_64-linux-gnu/mesa/ld.so.conf
Current core alternative: (null)
Current egl alternative: /usr/lib/x86_64-linux-gnu/mesa-egl/ld.so.conf
Is nvidia enabled? no
Is nvidia egl enabled? no
Is fglrx enabled? no
Is mesa enabled? yes
Is mesa egl enabled? yes
Is pxpress enabled? no
Is prime enabled? no
Is prime egl enabled? no
Is nvidia available? no
Is nvidia egl available? no
Is fglrx available? no
Is fglrx-core available? no
Is mesa available? yes
Is mesa egl available? yes
Is pxpress available? no
Is prime available? no
Is prime egl available? no
System configuration has changed
Intel IGP detected
Desktop system detected
or laptop with open drivers
Discrete NVIDIA card detected
System configuration has changed
Removing xorg.conf. Path: /etc/X11/xorg.conf
Moved /etc/X11/xorg.conf to /etc/X11/xorg.conf.05082017
==============================================================================
# System Information for Ubuntu 16.04.2 LTS in /dev/sda2
==============================================================================
_____________________________ Upgradable Packages _____________________________
No data available.
________________________ Package Configuration Pending ________________________
None
__________________________ Package Installation Pending _______________________
Reading package lists...
_________________________ Kernel Packages Installed __________________________
Package Version
linux-generic-hwe-16.04 4.8.0.51.22
linux-headers-4.8.0-36 4.8.0-36.36~16.04.1
linux-headers-4.8.0-36-generic 4.8.0-36.36~16.04.1
linux-headers-4.8.0-51 4.8.0-51.54~16.04.1
linux-headers-4.8.0-51-generic 4.8.0-51.54~16.04.1
linux-headers-generic-hwe-16.04 4.8.0.51.22
linux-image-4.8.0-36-generic 4.8.0-36.36~16.04.1
linux-image-4.8.0-51-generic 4.8.0-51.54~16.04.1
linux-image-extra-4.8.0-36-generic 4.8.0-36.36~16.04.1
linux-image-extra-4.8.0-51-generic 4.8.0-51.54~16.04.1
linux-image-generic-hwe-16.04 4.8.0.51.22
linux-signed-generic-hwe-16.04 4.8.0.51.22
linux-signed-image-4.8.0-51-generic 4.8.0-51.54~16.04.1
linux-signed-image-generic-hwe-16.04 4.8.0.51.22
File list in /boot directory:
abi-4.8.0-36-generic
abi-4.8.0-51-generic
config-4.8.0-36-generic
config-4.8.0-51-generic
efi
grub
initrd.img-4.8.0-36-generic
initrd.img-4.8.0-51-generic
memtest86+.bin
memtest86+.elf
memtest86+_multiboot.bin
System.map-4.8.0-36-generic
System.map-4.8.0-51-generic
vmlinuz-4.8.0-36-generic
vmlinuz-4.8.0-51-generic
vmlinuz-4.8.0-51-generic.efi.signed
__________________________________ Locales ___________________________________
/etc/default/locale:
# File generated by update-locale
LANG="fr_FR.UTF-8"
Default keyboard layout:
XKBMODEL="pc105"
XKBLAYOUT="fr"
XKBVARIANT="latin9"
XKBOPTIONS=""
BACKSPACE="guess"
_________________________________ System Logs ________________________________
Selection of relevent log entries:
None
_____________________________________ Xorg ____________________________________
============================ Disks SMART Attributes ===========================
### ATA disks: sda
# Drive sda:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.8.0-36-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: HGST HTS721075A9E630
LU WWN Device Id: 5 000cca 6aac051a7
Firmware Version: JB2OA3J0
User Capacity: 750,156,374,016 bytes [750 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 2.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Mon May 8 00:34:14 2017 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: FAILED!
Drive failure expected in less than 24 hours. SAVE ALL DATA.
See vendor-specific Attribute list for failed Attributes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 041 041 062 NOW 92628428
2 Throughput_Performance P-S--- 100 100 040 - 0
3 Spin_Up_Time POS--- 125 125 033 - 2
4 Start_Stop_Count -O--C- 099 099 000 - 2278
5 Reallocated_Sector_Ct PO--CK 056 056 005 - 0
7 Seek_Error_Rate PO-R-- 100 100 067 - 0
8 Seek_Time_Performance P-S--- 100 100 040 - 0
9 Power_On_Hours -O--C- 085 085 000 - 6900
10 Spin_Retry_Count PO--C- 100 100 060 - 0
12 Power_Cycle_Count -O--CK 099 099 000 - 2241
191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0
192 Power-Off_Retract_Count -O--CK 100 100 000 - 88
193 Load_Cycle_Count -O--C- 094 094 000 - 69590
194 Temperature_Celsius -O---- 142 142 000 - 42 (Min/Max 11/48)
196 Reallocated_Event_Count -O--CK 083 083 000 - 596
197 Current_Pending_Sector -O---K 001 001 000 - 6000
198 Offline_Uncorrectable ---R-- 100 100 000 - 0
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0
223 Load_Retry_Count -O-R-- 100 100 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
SMART Error Log Version: 1
ATA Error Count: 7878 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 7878 occurred at disk power-on lifetime: 6894 hours (287 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 c8 00 9d 99 05 Error: UNC 200 sectors at LBA = 0x05999d00 = 93953280
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 00 c8 9b 99 e0 00 00:44:23.139 READ DMA EXT
25 00 00 c8 99 99 e0 00 00:44:21.949 READ DMA EXT
25 00 08 c0 97 99 e0 00 00:44:21.948 READ DMA EXT
25 00 08 b8 97 99 e0 00 00:44:21.940 READ DMA EXT
25 00 08 b0 97 99 e0 00 00:44:21.932 READ DMA EXT
Error 7877 occurred at disk power-on lifetime: 6894 hours (287 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 e8 e0 93 99 05 Error: UNC 232 sectors at LBA = 0x059993e0 = 93950944
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 00 c8 93 99 e0 00 00:43:36.840 READ DMA EXT
ea 00 00 00 00 00 a0 00 00:43:36.817 FLUSH CACHE EXT
25 00 00 c8 8f 99 e0 00 00:43:30.001 READ DMA EXT
35 00 08 b8 6e 17 e0 00 00:43:30.001 WRITE DMA EXT
ea 00 00 00 00 00 a0 00 00:43:29.895 FLUSH CACHE EXT
Error 7876 occurred at disk power-on lifetime: 6894 hours (287 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 f8 e0 62 17 0b Error: UNC 248 sectors at LBA = 0x0b1762e0 = 186082016
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 f8 e0 62 17 e0 00 00:12:42.682 READ DMA EXT
ef 10 02 00 00 00 a0 00 00:12:42.682 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 00:12:42.682 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 00:12:42.680 IDENTIFY DEVICE
ef 10 06 00 00 00 00 00 00:12:42.680 SET FEATURES [Enable SATA feature]
Error 7875 occurred at disk power-on lifetime: 6893 hours (287 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 38 f7 16 0b Error: UNC at LBA = 0x0b16f738 = 186054456
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 28 60 a0 02 17 40 00 00:01:15.151 READ FPDMA QUEUED
60 08 58 98 02 17 40 00 00:01:14.142 READ FPDMA QUEUED
60 08 50 90 02 17 40 00 00:01:13.135 READ FPDMA QUEUED
60 08 48 88 02 17 40 00 00:01:13.135 READ FPDMA QUEUED
60 08 40 80 02 17 40 00 00:01:13.135 READ FPDMA QUEUED
Error 7874 occurred at disk power-on lifetime: 6893 hours (287 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 00 08 50 00 Error: WP at LBA = 0x00500800 = 5244928
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 08 60 70 f9 50 40 00 00:43:53.260 WRITE FPDMA QUEUED
61 c0 58 b0 f6 50 40 00 00:43:53.260 WRITE FPDMA QUEUED
61 40 50 70 f1 50 40 00 00:43:53.260 WRITE FPDMA QUEUED
61 c0 48 b0 ee 50 40 00 00:43:53.260 WRITE FPDMA QUEUED
61 40 40 70 e9 50 40 00 00:43:53.260 WRITE FPDMA QUEUED
### USB disks: sdb
# Drive sdb:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.8.0-36-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
Read Device Identity failed: scsi error unsupported scsi opcode
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
=============================== StdErr Messages ===============================
grub-probe: error: cannot find a GRUB drive for /dev/sdb1. Check your device.map.
E: Couldn't create temporary file to work with /var/lib/apt/lists/fr.archive.ubuntu.com_ubuntu_dists_xenial_InRelease - mkstemp (30: Read-only file system)
E: The package lists or status file could not be parsed or opened.
Merci beaucoup pour votre temps !
PS : Entre temps, j'avais retenté une installation, qui s'est terminée, donc j'ai un boot Ubuntu, mais lorsque je le lance, il m'amène sous le fameux écran noir dont je parlais précédemment, avec divers messages :
[0.130265] Error parsing PCC subspaces from PCCT
[0.954264] nouveau 0000:01:00.0: bus: MMIO read of 00000000 FAULT at 084048 [ IBUS ]
/dev/sda2 contains a file system with errors, check forced
*là il fait un petit check*
[131.803082] blk_update_request: I/O error, dev sda, sector 86088364
*là il semble planter, donc je l'ai éteint au bouton pour pouvoir faire le bisnext*
Dernière modification par Pixin (Le 08/05/2017, à 02:40)
Hors ligne
#4 Le 08/05/2017, à 10:20
- Bougron
Re : Installation impossible
Bonjour
Il ne te reste plus qu'à changer de disque.
C'est écrit qu'il est en train de mourir ("fail now"). Dans les 24 heures! Heureusement que tu as déjà sauvegardé tes données.
"J'ai donc utilisé une live-USB, et lors de l’installation, je choisis de supprimer toutes les données sur le disque dur et d'installer Ubuntu".
De plus, il a 6000 secteurs illisibles. Certains doivent contenir du logiciel fort utile pour faire fonctionner ubuntu. Par exemple le secteur 86088364
Drive failure expected in less than 24 hours. SAVE ALL DATA.
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 041 041 062 NOW 92628428
5 Reallocated_Sector_Ct PO--CK 056 056 005 - 0
9 Power_On_Hours -O--C- 085 085 000 - 6900
197 Current_Pending_Sector -O---K 001 001 000 - 6000
Si tu le souhaites, on peux essayer de trouver la liste des secteurs illisibles.
S'ils sont dans une toute petite partie du disque, cette partie est isolable.
Error 7878 occurred at disk power-on lifetime: 6894 hours (287 days + 6 hours)
40 51 c8 00 9d 99 05 Error: UNC 200 sectors at LBA = 0x05999d00 = 93953280
Error 7877 occurred at disk power-on lifetime: 6894 hours (287 days + 6 hours)
40 51 e8 e0 93 99 05 Error: UNC 232 sectors at LBA = 0x059993e0 = 93950944
Error 7876 occurred at disk power-on lifetime: 6894 hours (287 days + 6 hours)
40 51 f8 e0 62 17 0b Error: UNC 248 sectors at LBA = 0x0b1762e0 = 186082016
S'ils sont un peu n'importe où, c'est plus problématique. Il est alors préférable de changer de disque.
Dernière modification par Bougron (Le 08/05/2017, à 10:37)
Hors ligne
#5 Le 08/05/2017, à 10:27
- Laurent85
Re : Installation impossible
Bonjour,
Le disque le dit lui même, dans les 24 heures il va tomber en panne définitivement, sauvegarde tes données en urgence :
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: FAILED!
Drive failure expected in less than 24 hours. SAVE ALL DATA.
See vendor-specific Attribute list for failed Attributes
Dernière modification par Laurent85 (Le 08/05/2017, à 10:28)
Hors ligne
#6 Le 08/05/2017, à 11:45
- Pixin
Re : Installation impossible
Bonjour, et merci pour vos réponses si rapides.
Le problème est que, ayant un PC Portable, il me semble qu'il est complexe de changer de disque dur.
Cependant, j'en ai un second installé dans l'ordinateur (D: sous W#), a-t'il été analysé par bisnext ? Puis-je installer Ubuntu sur ce disque ? (il ne me semble pas que l'on m'ait proposé d'endroit où installer Ubuntu lorsque j'ai lancé la live-USB).
Pas d'inquiétude cependant, j'avais déjà sauvegardé les données sensibles ailleurs.
Je veux bien essayer de trouver la liste des secteurs illisibles, pour voir si on peut les isoler, si cela ne vous dérange pas, et ne vous prend pas trop de temps.
Encore merci à vous deux !
Hors ligne
#7 Le 08/05/2017, à 13:16
- Bougron
Re : Installation impossible
Je pense que ton ordinateur n'a qu'un seul disque de 750 Go que l'installateur de windows avait découpé en plusieurs partitions en t'autorisant à en utiliser deux que tu appelles C: et D:
Malheureusement l'installateur de ubuntu à tout détruit certainement suivant ta demande.
Voila ce qui reste
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL=
/dev/sda1 9B6E-8B2C vfat
/dev/sda2 4ee5a20c-e505-44a7-be35-29a2bd9b0716 ext4
/dev/sda3 f73efb88-6272-4289-90c1-8c35025e59e1 swap
/dev/sdb1 2017-02-15-21-44-13-00 iso9660 Ubuntu 16.04.2 LTS amd64
Le disque est découpé en trois partition et sdb1 est ta clé USB.
Je ne pense pense que cela soit si difficile que cela de changer un disque dur d'un portable " ASUSTeK model: G56JR" Il y a peut-être même des vidéos dans youtube.
Je note ton désir de connaître la liste des secteurs fichus.
C'est à toi que cela va prendre du temps.... probablement quelques jours.
Cela va se faire avec ta live USB.
Cela serait bien si elle était persistante. Mais j'en doute.
Plus tard on pourra aussi regarder le contenu de la partition SDA1
Pour le moment, je fais faire un pari.... La partition SDA1 n'est pas en mauvais état. On va voir si on peut écrire dedans.
1) Booter avec la live USB et choisir "essayer avant d'installer".
2) Mettre le clavier en français avec la commande.
setxbkmap fr ### certainement à écrire setxbb,qp fr
3) Monter la partition SDA1
sudo mount -v /dev/sda1 /mnt
4) Vérifier qu'on peut écrire dedans avec la commande
sudo cp /mnt//EFI/ubuntu/shimx64.efi /mnt/EFI/test
sudo rm /mnt/EFI/test
5) Je te propose un échauffement avec la partition SDA3.
a) Lancer gparted et formater la partition SDA3 en EXT4.
b) On voit que la taille physique est de 4096. Cela ira donc 8 fois moins lentement que si la taille physique était de 512
=== START OF INFORMATION SECTION ===
Device Model: HGST HTS721075A9E630
LU WWN Device Id: 5 000cca 6aac051a7
Firmware Version: JB2OA3J0
User Capacity: 750,156,374,016 bytes [750 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
c) C'est parti pour l'analyse de la partition SDA3 qui va être détruite.
sudo badblocks -b 4096 -w -s -v -o /mnt/EFI/sda3.badblocks /dev/sda3
wc /mnt/EFI/sda3.badblocks
ls /mnt/EFI/sda3.badblocks
6) C'est parti pour l'analyse de la partition SDA2 qui va être détruite.
sudo badblocks -b 4096 -w -s -v -o /mnt/EFI/sda2.badblocks /dev/sda2
wc /mnt/EFI/sda2.badblocks
ls /mnt/EFI/sda2.badblocks
Si tu peux relever la durée d'exécution qui sera fonction de la quantité d'incidents.
Dernière modification par Bougron (Le 08/05/2017, à 15:39)
Hors ligne
#8 Le 08/05/2017, à 13:39
- Pixin
Re : Installation impossible
Bonjour, et merci pour la réponse.
Je viens de formater sda3 en ext4, cependant, lorsque j'utilise :
sudo badblocks -b 4096 -w -s -v -o mnt/EFI/sda3.badblocks /dev/sda3
Je récupère
badblocks: No such file or directory while trying to open mnt/EFI/sda3.badblocks
.
Que faire ? Merci d'avance !
EDIT : C'est bon, j'ai mis /mnt au lieu de mnt, ça semble fonctionner, merci !
Petit compte rendu de l'avancement :
Checking for bad blocks in read-write mode
From block 0 to 2066943
Testing with pattern 0xaa: done
Reading and comparing : 1.97% done, 2:45:00 elapsed. (1749/0/0 errors)
Dernière modification par Pixin (Le 08/05/2017, à 16:36)
Hors ligne
#9 Le 08/05/2017, à 15:15
- nam1962
Re : Installation impossible
Changer un disque dur de portable prend en général 2 à 3 minutes, il faut un petit cruciforme
[ Modéré ]
Hors ligne
#10 Le 08/05/2017, à 15:30
- michel_04
Re : Installation impossible
Bonjour,
Changer un disque dur de portable prend en général 2 à 3 minutes, il faut un petit cruciforme
Ah ouais.
Bon, je vais retourner faire un échange de cruciforme à Bricodépôt, j'ai pris trop gros. >
|---->
A+
Dernière modification par michel_04 (Le 08/05/2017, à 15:31)
:D
De la bonne manière de poser les questions - Trouver de l'aide grâce au Groupe des Parrains Linux - Le Pacte des Gnous
PCs sous Debian Stable & Debian Sid.
Hors ligne
#11 Le 08/05/2017, à 15:45
- Bougron
Re : Installation impossible
Tu le mets dans le bac d'alimentation d'une imprimante 3D et tu programmes "réduction 88,22%"
Hors ligne
#12 Le 08/05/2017, à 15:48
- michel_04
Re : Installation impossible
Re,
Tu le mets dans le bac d'alimentation d'une imprimante 3D et tu programmes "réduction 88,22%"
Oups!
:D
De la bonne manière de poser les questions - Trouver de l'aide grâce au Groupe des Parrains Linux - Le Pacte des Gnous
PCs sous Debian Stable & Debian Sid.
Hors ligne
#13 Le 08/05/2017, à 16:59
- nam1962
Re : Installation impossible
Bougron, tu vas dire que je chipote, mais 88,23% le ferait pas mieux ?
[ Modéré ]
Hors ligne
#14 Le 08/05/2017, à 17:09
- ??
Re : Installation impossible
En attendant, rien que contrôler la qualité des 16 Go du swap va peut-être détruire le disque car cela semble traîner comme réponse.
Ce n'est pas exactement ton modèle et je n'ai pas compris pourquoi on démontait le clavier. https://www.youtube.com/watch?v=MgvH7bohGNE
Dernière modification par ?? (Le 08/05/2017, à 17:31)
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#15 Le 08/05/2017, à 17:12
- Pixin
Re : Installation impossible
Actuellement, j'en suis à :
Reading and comparing : 2.03 % done, 3:25:00 elapsed. (2179/0/0 errors)
Hors ligne
#16 Le 08/05/2017, à 17:13
- michel_04
Re : Installation impossible
Re,
rien que contrôler la qualité des 16 Go du swap va peut-être détruire le disque
Donc je rapporte le cruciforme, plus besoin.
A+
:D
De la bonne manière de poser les questions - Trouver de l'aide grâce au Groupe des Parrains Linux - Le Pacte des Gnous
PCs sous Debian Stable & Debian Sid.
Hors ligne
#17 Le 08/05/2017, à 17:49
- ??
Re : Installation impossible
Actuellement, j'en suis à :
Reading and comparing : 2.03 % done, 3:25:00 elapsed. (2179/0/0 errors)
Sauf erreur de ma part
2179 erreurs de lectures, 0 erreurs d'écriture, 0 erreur de comparaison. Cela semble dire qu'une relecture, refaite dans la foulée, retrouve le contenu.
Attention, il a y 4 passages avec des valeurs d'écritures différentes.
A la fin du passage de cette partition, avant d'attaquer la grande partition, peux-tu donner le résultat de
sudo smarctl -A /dev/sda
Il faudra certainement que tu installes dès maintenant le logiciel sur la clé Paragraphe 2.2 de https://doc.ubuntu-fr.org/smartmontools
Dernière modification par ?? (Le 08/05/2017, à 18:40)
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#18 Le 08/05/2017, à 18:27
- nam1962
Re : Installation impossible
Le pauvre disque risque bien d'y passer, comme tu l'as dit...
[ Modéré ]
Hors ligne
#19 Le 08/05/2017, à 18:51
- ??
Re : Installation impossible
Je crois avoir vu une discussion (à retrouver) où au bout d'une semaine, la connexion a cassé. En laissant refroidir plusieurs heures, ils ont pu continuer, jusqu'à ce que cela recommence. Au bout d'une dizaine de fois, cela ne tenait plus que quelques heures. Il faut dire qu'il y avait initialement plus de 60.000 secteurs détectés avant de faire ce style d'audit. Finalement, ils n'ont pas su combien il y en avait en réalité.
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#20 Le 09/05/2017, à 00:49
- Laurent85
Re : Installation impossible
Hmm quand un disque dit qu'il est mort (quasi) ce n'est pas qu'un problème de blocs défectueux, il est mort ! il faut changer le disque.
Hors ligne
#21 Le 09/05/2017, à 10:08
- nam1962
Re : Installation impossible
+1 Généralement le plus rapidement possible (quand ça m'est arrivé, ça s'est compté en heures voire minutes)
[ Modéré ]
Hors ligne
#22 Le 09/05/2017, à 14:03
- Pixin
Re : Installation impossible
Bonjour,
actuellement j'en suis à :
Reading and comparing : 10.90 % done, 24:11:38 elapsed. (9521/0/0 errors)
(toujours sur la partition de 16 Go)
Du coup je pense que je vais plutôt ouvrir mon PC ce soir, et voir si je peux facilement changer le disque dur.
Merci à tous pour votre aide !
Hors ligne
#23 Le 09/05/2017, à 14:18
- nam1962
Re : Installation impossible
...tu peux facilement changer de disque dur, moi je dis, le tout est d'acheter le HDD tout neuf, tout beau, tout propre
[ Modéré ]
Hors ligne
#24 Le 09/05/2017, à 14:21
- Bougron
Re : Installation impossible
Bonjour
C'est effectivement assez lent ou alors c'est très pourri dans cette zone.... Pourtant les deuxièmes et 3eme compteurs restent à zéro ne serait-il qu'à la phase d'écriture....? qui plus est, ta partition fait seulement 8 Go (je viens de vérifier)
Checking for bad blocks in read-write mode
From block 0 to 2066943
2066943 * 4096 =
Drive: sda _____________________________________________________________________
Disk /dev/sda: 698.7 GiB, 750156374016 bytes, 1465149168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Partition Attrs Start Sector End Sector # of Sectors System
/dev/sda1 2,048 1,050,623 1,048,576 EFI System partition
/dev/sda2 1,050,624 1,448,611,839 1,447,561,216 Data partition (Linux)
/dev/sda3 1,448,611,840 1,465,147,391 16,535,552 Swap partition (Linux)
16535552*512 =
Hors ligne
Pages : 1