#1 Le 29/05/2017, à 20:10
- ornitho81
Utilisation Carte NVIDIA GeForce GTX 860M
Bonjour,
Depuis l'installation de UBUNTU 16.04.2 LTS, Il n'y aucun module nvidia dans la partie "Modules Loaded", ce qui signifie qu'il n'y a aucun driver NVIDIA utilisé(*). On m'a fait remonté L'information et la personne en question pense que c'est la partie graphique intégrée sur la même puce que mon processeur Intel Core i5-4210H qui gère actuellement l'affichage et que ma carte graphique NVIDIA GeForce GTX 860M n'est pas utilisée actuellement.
Je m'en étais un peu aperçu lorsque je voulais jouer à un jeu sur STEAM.
Je souhaiterais que ma carte NVIDIA soit utilisée, quelqu'un pourrait m'expliquer la manip' ^^¡
(*)On peut voir dans le rapport BISNEXT qu'il y a des traces de drivers NVIDIA qui sont installés ou qui ont été installés (on voit "nvidia-340") mais pour autant il n'y a aucun driver NVIDIA effectivement utilisé.
Hors ligne
#2 Le 29/05/2017, à 20:24
- malbo
Re : Utilisation Carte NVIDIA GeForce GTX 860M
on peut voir dans le rapport BISNEXT
Il est là le rapport BISNEXT : http://forum.ubuntu-fr.org/viewtopic.ph … #p21736436
Hors ligne
#3 Le 29/05/2017, à 20:28
- ornitho81
Re : Utilisation Carte NVIDIA GeForce GTX 860M
Merci, comment on fait pour citer un commentaire plutôt que de copier un com de quelqu'un d'autre.
Hors ligne
#4 Le 30/05/2017, à 06:05
- malbo
Re : Utilisation Carte NVIDIA GeForce GTX 860M
Déjà, il faut que tu sois connecté sur le forum. Après ça, tu peux cliquer sur "Citer" qui est en rouge dans le coin en bas à droite de la fenêtre du message que tu veux citer,
Hors ligne
#5 Le 30/05/2017, à 08:34
- moko138
Re : Utilisation Carte NVIDIA GeForce GTX 860M
ornitho81 a écrit :on peut voir dans le rapport BISNEXT
Il est là le rapport BISNEXT : http://forum.ubuntu-fr.org/viewtopic.ph … #p21736436
May 28 2017, bisnext report id 8c71a also available at https://paste.debian.net/948048/ bisnext 0.02 (...) ### USB disks: sdb smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.8.0-52-generic] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint F4 EG (AF) Device Model: SAMSUNG HD204UI LU WWN Device Id: 5 0024e9 003fbfaa5 Firmware Version: 1AQ10001 User Capacity: 2 000 398 934 016 bytes [2,00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 5400 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Sun May 28 15:21:15 2017 CEST ==> WARNING: Using smartmontools or hdparm with this drive may result in data loss due to a firmware bug. ****** THIS DRIVE MAY OR MAY NOT BE AFFECTED! ****** Buggy and fixed firmware report same version number! See the following web pages for details: http://knowledge.seagate.com/articles/en_US/FAQ/223571en http://www.smartmontools.org/wiki/SamsungF4EGBadBlocks SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF ENABLE/DISABLE COMMANDS SECTION === SMART Enabled. === START OF READ SMART DATA SECTION === SMART Status not supported: Incomplete response, ATA output registers missing SMART overall-health self-assessment test result: PASSED Warning: This result is based on an Attribute check. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 0 2 Throughput_Performance -OS--K 252 252 000 - 0 3 Spin_Up_Time PO---K 068 068 025 - 9753 4 Start_Stop_Count -O--CK 100 100 000 - 160 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 7 Seek_Error_Rate -OSR-K 252 252 051 - 0 8 Seek_Time_Performance --S--K 252 252 015 - 0 9 Power_On_Hours -O--CK 100 100 000 - 78 10 Spin_Retry_Count -O--CK 252 252 051 - 0 11 Calibration_Retry_Count -O--CK 252 252 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 1006 181 Program_Fail_Cnt_Total -O---K 100 100 000 - 139 191 G-Sense_Error_Rate -O---K 252 252 000 - 0 192 Power-Off_Retract_Count -O---K 252 252 000 - 0 194 Temperature_Celsius -O---- 057 050 000 - 43 (Min/Max 29/50) 195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 196 Reallocated_Event_Count -O--CK 252 252 000 - 0 197 Current_Pending_Sector -O--CK 252 252 000 - 0 198 Offline_Uncorrectable ----CK 252 252 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 100 100 000 - 1 200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 0 223 Load_Retry_Count -O--CK 252 252 000 - 0 225 Load_Cycle_Count -O--CK 100 100 000 - 1054 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning SMART Error Log Version: 1 No Errors Logged
Le rapport donne un avertissement inquiétant en faisant état d'un "firmware bug", cf. https://www.smartmontools.org/wiki/SamsungF4EGBadBlocks où on voit que ce Samsung HD204UI de 2 To en est affecté.
Et en effet ces valeurs
4 Start_Stop_Count 160 # mises en rotation,
# soit par mise sous tension,
# soit par sortie de veille ("sleep mode").
9 Power_On_Hours 78
12 Power_Cycle_Count 1006 # nombre de mises sous tension.
sont apparemment incompatibles.
Toutefois je ne peux pas te conseiller le correctif F4EG.exe mentionné là :
htt p://knowledge.seagate.com/articles/en_US/FAQ/223571en
puisqu'il est conçu pour les modèles suivants
F4EG HD204UI
HD204UI/Z4
HD204UI/UZ4
non identiques à ton HD204UI.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#6 Le 30/05/2017, à 12:44
- ornitho81
Re : Utilisation Carte NVIDIA GeForce GTX 860M
Bonjour,
Je vais être honnête, je n'ai rien compris (je ne sais pas ce que c'est le HD204UI) si...peut être que j'ai compris que en gros ma carte graphique est incompatible avec UBUNTU??
Désolé, pour mon incompréhension ^^!
Hors ligne