Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 21/06/2017, à 12:38

lmdlg

[Résolu] Ventilateur d'un Fujistu-Siemens AmiloP et Lubuntu

Bonjour,

Mon "ordinosaure" (2008 ? est-ce qu'il a le droit à cette appellation ?) Fujistu-Siemens Amilo Pi 3540 tourne actuellement sur lubuntu 16.04 - 64 bits afin de préserver son processeur. Cependant, le ventilo a tendance à se mettre en route assez rapidement, et à monter dans les tours au point que cela devienne désagréable.
J'ai nettoyé la grille qui est à l'arrière avec un aspirateur, puis ai suivi les conseils de nam1962, mais malgré ça, le ventilo tourne toujours. Y'a un moyen d'améliorer ça ? Et sinon que pensez-vous des tapis refroidisseurs pour portable ? C'est un vrai plus ?

à bientôt !

Dernière modification par lmdlg (Le 25/06/2017, à 19:30)


Lenovo G70-35 – Xubuntu 18.04.1 / bépoète

Hors ligne

#2 Le 21/06/2017, à 12:47

Caribou22

Re : [Résolu] Ventilateur d'un Fujistu-Siemens AmiloP et Lubuntu

Bonjour smile
Bientôt 10 ans l'engin déjà ! https://www.notebookcheck.biz/Fujitsu-S … 607.0.html
Mais il peut encore rendre service un moment vu sa config smile
Peux-tu nous envoyer un rapport bisnext ?

Edit : Concernant les supports ventilés, ça peut soulager ton portable lors d'utilisations intensives (jeux, traitement photo etc.) mais comme l'a dit michel_04 en dessous, la première étape est une ventilation propre. Je te conseille de remédier à ça en premier smile (Il y a plein de tutos sur Youtube pour démonter son modèle d'ordi portable.)

Dernière modification par Caribou22 (Le 21/06/2017, à 13:08)

Hors ligne

#3 Le 21/06/2017, à 13:00

michel_04

Re : [Résolu] Ventilateur d'un Fujistu-Siemens AmiloP et Lubuntu

Bonjour,

lmdlg a écrit :

J'ai nettoyé la grille qui est à l'arrière avec un aspirateur

Pas très recommandé.

lmdlg a écrit :

Y'a un moyen d'améliorer ça ?

Oui.
Démonter ton portable (Notebook fujitsu siemens AMILO Pi 3540 Cleaning), nettoyer le ventilateur et la grille (air sec), nettoyer l'intérieur, en profiter pour remplacer la graisse thermique.

lmdlg a écrit :

Et sinon que pensez-vous des tapis refroidisseurs pour portable ? C'est un vrai plus ?

Hum, ça ne remplace pas un bon nettoyage, c'est un cache-misère, tôt ou tard il faudra nettoyer..

A+

Hors ligne

#4 Le 21/06/2017, à 16:33

lmdlg

Re : [Résolu] Ventilateur d'un Fujistu-Siemens AmiloP et Lubuntu

Merci pour votre aide !
Je vais donc jouer du tournevis ! wink

Le rapport est dispo ici

à suivre !


Lenovo G70-35 – Xubuntu 18.04.1 / bépoète

Hors ligne

#5 Le 21/06/2017, à 18:57

Caribou22

Re : [Résolu] Ventilateur d'un Fujistu-Siemens AmiloP et Lubuntu

Le Bisnext : https://paste.debian.net/972595/

Jun 21, 2017, bisnext report id f841a

                                 bisnext 0.05


============================ Hardware and System Summary ======================

System:    Kernel: 4.4.0-81-generic x86_64 (64 bit gcc: 5.4.0)
           Desktop: LXDE (Openbox 3.6.1) dm: lightdm
           Distro: Ubuntu 16.04.2 LTS
Machine:   Device: laptop System: FUJITSU SIEMENS product: AMILO Pi 3540 v: 10600934644
           Mobo: FUJITSU SIEMENS model: F47 v: 01
           BIOS: Phoenix v: 1.06C date: 08/14/2008
           Chassis: type: 10
Battery    BAT0: charge: 1.4 Wh 100.0% condition: 1.4/44.0 Wh (3%)
           volts: 12.5/10.8
           model: FUJITSU SIEMENS F50IXX status: Full
CPU:       Dual core Intel Core2 Duo T5800 (-MCP-) cache: 2048 KB
           flags: (lm nx sse sse2 sse3 ssse3) bmips: 7979
           clock speeds: min/max: 1200/2000 MHz 1: 2000 MHz 2: 2000 MHz
Memory:    Array-1 capacity: 4 GB devices: 2 EC: None
           Device-1: M1 size: 2 GB speed: 800 MHz type: DDR2
           manufacturer: Mfg 0 part: SODIMM000
           Device-2: M2 size: 2 GB speed: 800 MHz type: DDR2
           manufacturer: Mfg 1 part: SODIMM001
Graphics:  Card: NVIDIA G98M [GeForce 9300M GS]
           bus-ID: 01:00.0 chip-ID: 10de:06e9
           Display Server: X.Org 1.18.4 drivers: nouveau (unloaded: modesetting,fbdev,vesa)
           Resolution: 1280x800@59.97hz
           GLX Renderer: Gallium 0.4 on NV98
           GLX Version: 3.3 Mesa 12.0.6 (compat-v: 3.0) Direct Rendering: Yes
Audio:     Card Intel 82801I (ICH9 Family) HD Audio Controller
           driver: snd_hda_intel bus-ID: 00:1b.0 chip-ID: 8086:293e
           Sound: Advanced Linux Sound Architecture v: k4.4.0-81-generic
Network:   Card-1: Intel WiFi Link 5100
           driver: iwlwifi bus-ID: 04:00.0 chip-ID: 8086:4232
           IF: wlp4s0 state: up mac: <filter>
           Card-2: Realtek RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller
           driver: r8169 v: 2.3LK-NAPI port: 5000
           bus-ID: 05:00.0 chip-ID: 10ec:8136
           IF: enp5s0 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives:    HDD Total Size: 320.1GB (67.4% used)
           ID-1: /dev/sda model: WDC_WD3200BEVT size: 320.1GB
          
           Optical-1: /dev/sr0 model: HL-DT-ST DVDRAM GSA-T50N
           rev: RW05 dev-links: cdrom,cdrw,dvd,dvdrw
           Features: speed: 24x multisession: yes
           audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
Partition: ID-1: / size: 290G used: 198G (72%) fs: ext4 dev: /dev/sda1
           label: N/A uuid: 3b68221f-c004-4006-bcb6-f26045179fc1
           ID-2: swap-1 size: 4.29GB used: 0.00GB (0%) fs: swap dev: /dev/sda5
           label: N/A uuid: 4b716237-3aef-4d05-9aac-4fd0bb2f6440
RAID:      System: supported: N/A
           No RAID devices: /proc/mdstat, md_mod kernel module present
           Unused Devices: none
Unmounted: No unmounted partitions detected
Sensors:   System Temperatures: cpu: 64.0C mobo: 0.0C gpu: 60.0
           Fan Speeds (in rpm): cpu: N/A
Repos:     Active apt sources in file: /etc/apt/sources.list
           deb http://fr.archive.ubuntu.com/ubuntu/ xenial main restricted
           deb-src http://fr.archive.ubuntu.com/ubuntu/ xenial main restricted
           deb http://fr.archive.ubuntu.com/ubuntu/ xenial-updates main restricted
           deb-src http://fr.archive.ubuntu.com/ubuntu/ xenial-updates main restricted
           deb http://fr.archive.ubuntu.com/ubuntu/ xenial universe
           deb-src http://fr.archive.ubuntu.com/ubuntu/ xenial universe
           deb http://fr.archive.ubuntu.com/ubuntu/ xenial-updates universe
           deb-src http://fr.archive.ubuntu.com/ubuntu/ xenial-updates universe
           deb http://fr.archive.ubuntu.com/ubuntu/ xenial multiverse
           deb-src http://fr.archive.ubuntu.com/ubuntu/ xenial multiverse
           deb http://fr.archive.ubuntu.com/ubuntu/ xenial-updates multiverse
           deb-src http://fr.archive.ubuntu.com/ubuntu/ xenial-updates multiverse
           deb http://fr.archive.ubuntu.com/ubuntu/ xenial-backports main restricted universe multiverse
           deb-src http://fr.archive.ubuntu.com/ubuntu/ xenial-backports main restricted universe multiverse
           deb http://security.ubuntu.com/ubuntu xenial-security main restricted
           deb-src http://security.ubuntu.com/ubuntu xenial-security main restricted
           deb http://security.ubuntu.com/ubuntu xenial-security universe
           deb-src http://security.ubuntu.com/ubuntu xenial-security universe
           deb http://security.ubuntu.com/ubuntu xenial-security multiverse
           deb-src http://security.ubuntu.com/ubuntu xenial-security multiverse
           deb http://archive.canonical.com/ubuntu xenial partner
           deb-src http://archive.canonical.com/ubuntu xenial partner
           deb-src http://archive.canonical.com/ubuntu wily partner
Processes: CPU: % used - Memory: MB / % used - top 10 active
           1: cpu: 57.3% command: firefox pid: 2107 mem: 584.43MB (14.8%)
           2: cpu: 1.9% command: Xorg pid: 1074 mem: 49.02MB (1.2%)
           3: cpu: 0.6% command: init pid: 1 mem: 6.00MB (0.1%)
           4: cpu: 0.5% command: pulseaudio pid: 1970 mem: 11.09MB (0.2%)
           5: cpu: 0.4% command: lxpanel pid: 1860 mem: 32.47MB (0.8%)
           6: cpu: 0.3% command: bash pid: 4659 mem: 4.47MB (0.1%)
           7: cpu: 0.3% command: lxterminal pid: 2198 mem: 25.39MB (0.6%)
           8: cpu: 0.3% command: systemd-udevd pid: 253 mem: 5.55MB (0.1%)
           9: cpu: 0.2% command: NetworkManager pid: 863 mem: 16.78MB (0.4%)
           10: cpu: 0.2% daemon: ~kworker/0:2~ pid: 31 mem: 0.00MB (0.0%)
Info:      Processes: 186 Uptime: 4 min Memory: 764.1/3946.8MB
           Init: systemd v: 229 runlevel: 5 Gcc sys: 5.4.0
           Client: Shell (bash 4.3.481 running in bash) inxi: 2.3.21


_______________________________ UEFI settings _________________________________

Computer booted in Legacy mode for this session.
UEFI currently not active or not available on this system.


Secure Boot disabled or not available on this system.



__________________________________ OS prober ________________________________

None




========================= Boot Information Details ============================

 => Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location. It also 
    embeds following components:
    
    modules
    ---------------------------------------------------------------------------
    fshelp ext2 part_msdos biosdisk
    ---------------------------------------------------------------------------
    
    config script
    ---------------------------------------------------------------------------
    (,msdos1)/boot/grub
    ---------------------------------------------------------------------------

sda1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 16.04.2 LTS
    Boot files:         /boot/grub/grub.cfg /etc/fstab /etc/default/grub  
                       /boot/grub/i386-pc/core.img

sda2: __________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  Unknown
    Boot sector info: 

sda5: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

_________________________=== Drive/Partition Info ===__________________________

Drive: sda _____________________________________________________________________
Disque /dev/sda : 298,1 GiB, 320072933376 octets, 625142448 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1    *          2,048   616,763,391   616,761,344  83 Linux
/dev/sda2         616,765,438   625,141,759     8,376,322   5 Extended
/dev/sda5         616,765,440   625,141,759     8,376,320  82 Linux swap / Solaris


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/sda1        3b68221f-c004-4006-bcb6-f26045179fc1   ext4       
/dev/sda5        4b716237-3aef-4d05-9aac-4fd0bb2f6440   swap       

_________________________ "ls -l /dev/disk/by_id" output ______________________

total 0
lrwxrwxrwx 1 root root  9 juin  21 17:27 ata-HL-DT-ST_DVDRAM_GSA-T50N_M5287M60113 -> ../../sr0
lrwxrwxrwx 1 root root  9 juin  21 17:27 ata-WDC_WD3200BEVT-22ZCT0_WD-WXE708J82339 -> ../../sda
lrwxrwxrwx 1 root root 10 juin  21 17:27 ata-WDC_WD3200BEVT-22ZCT0_WD-WXE708J82339-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 juin  21 17:27 ata-WDC_WD3200BEVT-22ZCT0_WD-WXE708J82339-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 juin  21 17:27 ata-WDC_WD3200BEVT-22ZCT0_WD-WXE708J82339-part5 -> ../../sda5
lrwxrwxrwx 1 root root  9 juin  21 17:27 wwn-0x50014ee201ceb7eb -> ../../sda
lrwxrwxrwx 1 root root 10 juin  21 17:27 wwn-0x50014ee201ceb7eb-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 juin  21 17:27 wwn-0x50014ee201ceb7eb-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 juin  21 17:27 wwn-0x50014ee201ceb7eb-part5 -> ../../sda5


_________________________ "ls -R /dev/mapper/" output _________________________

None


________________________________ Mount points _________________________________

Device           Mount_Point              Type       Options
/dev/sda1        /                                   ext4 (rw,relatime,errors=remount-ro,data=ordered)



_________________________=== Boot Files Contents ===___________________________


___________________________ sda1/boot/grub/grub.cfg: ___________________________

File size: 9383, Line count: 274, Menu entries (sub entries included) : 7

#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/10_linux ###

--- Notice bisnext removed top of file contents from the report for readability

menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-3b68221f-c004-4006-bcb6-f26045179fc1' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  3b68221f-c004-4006-bcb6-f26045179fc1
	else
	  search --no-floppy --fs-uuid --set=root 3b68221f-c004-4006-bcb6-f26045179fc1
	fi
        linux	/boot/vmlinuz-4.4.0-81-generic root=UUID=3b68221f-c004-4006-bcb6-f26045179fc1 ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-4.4.0-81-generic
}

--- Notice bisnext removed the submenu section from the report for readability

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  3b68221f-c004-4006-bcb6-f26045179fc1
	else
	  search --no-floppy --fs-uuid --set=root 3b68221f-c004-4006-bcb6-f26045179fc1
	fi
	knetbsd	/boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  3b68221f-c004-4006-bcb6-f26045179fc1
	else
	  search --no-floppy --fs-uuid --set=root 3b68221f-c004-4006-bcb6-f26045179fc1
	fi
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###

_______________________________ sda1/etc/fstab: ________________________________

UUID=3b68221f-c004-4006-bcb6-f26045179fc1 /               ext4    errors=remount-ro 0       1
UUID=4b716237-3aef-4d05-9aac-4fd0bb2f6440 none            swap    sw              0       0

____________________________ sda1/etc/default/grub: ____________________________

GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""


===============================================================================
                          Running System Information                           
===============================================================================

______________________________ Kernel parameters ______________________________

BOOT_IMAGE=/boot/vmlinuz-4.4.0-81-generic root=UUID=3b68221f-c004-4006-bcb6-f26045179fc1 ro quiet splash vt.handoff=7


______________________________ Boot-up Statistics ______________________________

Startup finished in 4.257s (kernel) + 43.123s (userspace) = 47.380s


blame, first 10:
networking.service                  12.647s
grub-common.service                 12.444s
dev-sda1.device                     10.934s
winbind.service                     9.842s
nmbd.service                        9.823s
ModemManager.service                9.613s
samba-ad-dc.service                 9.106s
accounts-daemon.service             9.091s
NetworkManager-wait-online.service  9.026s
apparmor.service                    7.716s


_________________________ RAM usage & Free disk space _________________________

              total        used        free      shared  buff/cache   available
Mem:           3.9G        696M        2.5G         16M        730M        2.9G
Swap:          4.0G          0B        4.0G
Swappiness = 60

Filesystem     Mounted on Type  Size  Used Avail Use% IUse%
/dev/sda1      /          ext4  290G  198G   78G  72%    3%

Swap partition for hibernation : UUID=4b716237-3aef-4d05-9aac-4fd0bb2f6440


_______________________________ Wireless Status _______________________________

0: phy0: Wireless LAN
	Soft blocked: no
	Hard blocked: no


_______________________________ Modules Loaded _______________________________

Excerpt:
drm                   364544  5 ttm,drm_kms_helper,nouveau
drm_kms_helper        155648  1 nouveau
i2c_algo_bit           16384  1 nouveau
mxm_wmi                16384  1 nouveau
nouveau              1495040  2
ttm                    94208  1 nouveau
video                  40960  1 nouveau
wmi                    20480  2 mxm_wmi,nouveau


______________________________ Additional Drivers _____________________________

== cpu-microcode.py ==
driver   : intel-microcode - distro non-free

== /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0 ==
model    : G98M [GeForce 9300M GS]
vendor   : NVIDIA Corporation
modalias : pci:v000010DEd000006E9sv00001734sd00001137bc03sc00i00
driver   : nvidia-340 - distro non-free recommended
driver   : xserver-xorg-video-nouveau - distro free builtin
driver   : nvidia-304 - distro non-free


_____________________________ Upgradable Packages _____________________________

None


________________________ Package Configuration Pending ________________________

None


__________________________ Package Installation Pending _______________________

Reading package lists...
Building dependency tree...
Reading state information...
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.


__________________ Configuration files of uninstalled packages: ________________

Package                             Version
cups-driver-gutenprint              5.2.11~pre1-1
flashplugin-installer               24.0.0.186ubuntu0.16.04.1
fonts-droid                         1:4.4.4r2-6ubuntu1
libapt-inst1.7:amd64                1.0.10.2ubuntu2
libapt-pkg4.16:amd64                1.0.10.2ubuntu2
libaudcore2:amd64                   3.5-2
libbind9-90                         1:9.9.5.dfsg-11ubuntu1.3
libbonobo2-0:amd64                  2.32.1-3
libbonobo2-common                   2.32.1-3
libcamel-1.2-52                     3.16.5-1ubuntu3
libdns-export100                    1:9.9.5.dfsg-11ubuntu1.3
libdns100                           1:9.9.5.dfsg-11ubuntu1.3
libebook-contacts-1.2-1             3.16.5-1ubuntu3
libedataserver-1.2-20               3.16.5-1ubuntu3
libept1.4.16:amd64                  1.0.14ubuntu1.1
libgif4:amd64                       4.1.6-11
libgnome-desktop-3-10:amd64         3.16.2-2ubuntu2
libgnome2-common                    2.32.1-5ubuntu1
libgnomevfs2-common                 1:2.24.4-6.1ubuntu1
libgnutls-deb0-28:amd64             3.3.15-5ubuntu2
libgsl0ldbl:amd64                   1.16+dfsg-4
libgtop2-10                         2.30.0.is.2.30.0-0ubuntu1
libimobiledevice4:amd64             1.1.6+dfsg-3.1build1
libirs-export91                     1:9.9.5.dfsg-11ubuntu1.3
libisc-export95                     1:9.9.5.dfsg-11ubuntu1.3
libisc95                            1:9.9.5.dfsg-11ubuntu1.3
libisccc90                          1:9.9.5.dfsg-11ubuntu1.3
libisccfg-export90                  1:9.9.5.dfsg-11ubuntu1.3
libisccfg90                         1:9.9.5.dfsg-11ubuntu1.3
libisl13:amd64                      0.14-2
liblwres90                          1:9.9.5.dfsg-11ubuntu1.3
libpoppler52:amd64                  0.33.0-0ubuntu3.1
libpresage1:amd64                   0.9.1-0ubuntu2
libprocps3:amd64                    1:3.3.9-1ubuntu8
libpython3.4-minimal:amd64          3.4.3-9ubuntu1
libqpdf13v5:amd64                   5.1.3-2
libusbmuxd2:amd64                   1.0.9-1build1
libvpx2:amd64                       1.4.0-4
libvte-2.90-9                       1:0.36.3-1ubuntu2
libvte-2.90-common                  1:0.36.3-1ubuntu2
libx264-146:amd64                   2:0.146.2555+git0c21480-1
libx265-59:amd64                    1.7-4
libxtables10                        1.4.21-2ubuntu2
linux-image-4.2.0-16-generic        4.2.0-16.19
linux-image-4.2.0-36-generic        4.2.0-36.42
linux-image-4.4.0-22-generic        4.4.0-22.40
linux-image-4.4.0-24-generic        4.4.0-24.43
linux-image-4.4.0-34-generic        4.4.0-34.53
linux-image-4.4.0-38-generic        4.4.0-38.57
linux-image-4.4.0-47-generic        4.4.0-47.68
linux-image-4.4.0-53-generic        4.4.0-53.74
linux-image-4.4.0-62-generic        4.4.0-62.83
linux-image-4.4.0-64-generic        4.4.0-64.85
linux-image-4.4.0-66-generic        4.4.0-66.87
linux-image-4.4.0-77-generic        4.4.0-77.98
linux-image-extra-4.2.0-16-generic  4.2.0-16.19
linux-image-extra-4.2.0-36-generic  4.2.0-36.42
linux-image-extra-4.4.0-22-generic  4.4.0-22.40
linux-image-extra-4.4.0-24-generic  4.4.0-24.43
linux-image-extra-4.4.0-34-generic  4.4.0-34.53
linux-image-extra-4.4.0-38-generic  4.4.0-38.57
linux-image-extra-4.4.0-47-generic  4.4.0-47.68
linux-image-extra-4.4.0-53-generic  4.4.0-53.74
linux-image-extra-4.4.0-62-generic  4.4.0-62.83
linux-image-extra-4.4.0-64-generic  4.4.0-64.85
linux-image-extra-4.4.0-66-generic  4.4.0-66.87
linux-image-extra-4.4.0-77-generic  4.4.0-77.98
pepperflashplugin-nonfree           1.8.2ubuntu1
perl-modules                        5.20.2-6ubuntu0.2
python3.4                           3.4.3-9ubuntu1
python3.4-minimal                   3.4.3-9ubuntu1
snap-confine                        2.25
ttf-indic-fonts-core                1:0.5.14ubuntu1


Use the following command to clean old configuration files:

sudo apt purge cups-driver-gutenprint flashplugin-installer fonts-droid libapt-inst1.7:amd64 libapt-pkg4.16:amd64 libaudcore2:amd64 libbind9-90 libbonobo2-0:amd64 libbonobo2-common libcamel-1.2-52 libdns-export100 libdns100 libebook-contacts-1.2-1 libedataserver-1.2-20 libept1.4.16:amd64 libgif4:amd64 libgnome-desktop-3-10:amd64 libgnome2-common libgnomevfs2-common libgnutls-deb0-28:amd64 libgsl0ldbl:amd64 libgtop2-10 libimobiledevice4:amd64 libirs-export91 libisc-export95 libisc95 libisccc90 libisccfg-export90 libisccfg90 libisl13:amd64 liblwres90 libpoppler52:amd64 libpresage1:amd64 libprocps3:amd64 libpython3.4-minimal:amd64 libqpdf13v5:amd64 libusbmuxd2:amd64 libvpx2:amd64 libvte-2.90-9 libvte-2.90-common libx264-146:amd64 libx265-59:amd64 libxtables10 linux-image-4.2.0-16-generic linux-image-4.2.0-36-generic linux-image-4.4.0-22-generic linux-image-4.4.0-24-generic linux-image-4.4.0-34-generic linux-image-4.4.0-38-generic linux-image-4.4.0-47-generic linux-image-4.4.0-53-generic linux-image-4.4.0-62-generic linux-image-4.4.0-64-generic linux-image-4.4.0-66-generic linux-image-4.4.0-77-generic linux-image-extra-4.2.0-16-generic linux-image-extra-4.2.0-36-generic linux-image-extra-4.4.0-22-generic linux-image-extra-4.4.0-24-generic linux-image-extra-4.4.0-34-generic linux-image-extra-4.4.0-38-generic linux-image-extra-4.4.0-47-generic linux-image-extra-4.4.0-53-generic linux-image-extra-4.4.0-62-generic linux-image-extra-4.4.0-64-generic linux-image-extra-4.4.0-66-generic linux-image-extra-4.4.0-77-generic pepperflashplugin-nonfree perl-modules python3.4 python3.4-minimal snap-confine ttf-indic-fonts-core


_________________________ Kernel Packages Installed __________________________

Package                             Version
linux-generic                       4.4.0.81.87
linux-headers-4.4.0-78              4.4.0-78.99
linux-headers-4.4.0-78-generic      4.4.0-78.99
linux-headers-4.4.0-81              4.4.0-81.104
linux-headers-4.4.0-81-generic      4.4.0-81.104
linux-headers-generic               4.4.0.81.87
linux-image-4.4.0-78-generic        4.4.0-78.99
linux-image-4.4.0-81-generic        4.4.0-81.104
linux-image-extra-4.4.0-78-generic  4.4.0-78.99
linux-image-extra-4.4.0-81-generic  4.4.0-81.104
linux-image-generic                 4.4.0.81.87
linux-tools-4.4.0-78                4.4.0-78.99
linux-tools-4.4.0-78-generic        4.4.0-78.99
linux-tools-4.4.0-81                4.4.0-81.104
linux-tools-4.4.0-81-generic        4.4.0-81.104
linux-tools-common                  4.4.0-81.104
linux-tools-virtual                 4.4.0.81.87



_________________________________ System Logs ________________________________

Failed services:
0 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.


Selection of relevent log entries:
[    0.125117] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.152896] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.157494] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.224443] pci 0000:01:00.0: BAR 6: failed to assign [mem size 0x00020000 pref]
[    7.269250] systemd[1]: Dependency failed for pNFS block layout mapping daemon.
[    7.269302] systemd[1]: nfs-blkmap.service: Job nfs-blkmap.service/start failed with result 'dependency'.
[   10.726092] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   14.082597] iwlwifi 0000:04:00.0: loaded firmware version 8.83.5.1 build 33692 op_mode iwldvm


_____________________________________ Xorg ____________________________________

Partial log entries:
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    34.149] (--) PCI:*(0:1:0:0) 10de:06e9:1734:1137 rev 161, Mem @ 0xce000000/16777216, 0xd0000000/268435456, 0xcc000000/33554432, I/O @ 0x00002000/128
[    34.484] (EE) Failed to load module "nvidia" (module does not exist, 0)
[    34.552] (EE) Failed to load module "nvidia" (module does not exist, 0)


GPU Manager logs:
log_file: /var/log/gpu-manager.log
last_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
new_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
can't access /run/u-d-c-nvidia-was-loaded file
can't access /run/u-d-c-fglrx-was-loaded file
Looking for fglrx modules in /lib/modules/4.4.0-81-generic/updates/dkms
Looking for nvidia modules in /lib/modules/4.4.0-81-generic/updates/dkms
Is nouveau loaded? yes
Vendor/Device Id: 10de:6e9
BusID "PCI:1@0:0:0"
Is boot vga? yes
Skipping "/dev/dri/card0", driven by "nouveau"
Skipping "/dev/dri/card0", driven by "nouveau"
Found "/dev/dri/card0", driven by "nouveau"
output 0:
	card0-LVDS-1
Number of connected outputs for /dev/dri/card0: 1
Skipping "/dev/dri/card0", driven by "nouveau"
last cards number = 1
Has nvidia? yes
How many cards? 1
main_arch_path x86_64-linux-gnu, other_arch_path i386-linux-gnu
Current alternative: /usr/lib/x86_64-linux-gnu/mesa/ld.so.conf
Current core alternative: (null)
Current egl alternative: /usr/lib/x86_64-linux-gnu/mesa-egl/ld.so.conf
Is mesa enabled? yes
Is mesa egl enabled? yes
Is mesa available? yes
Is mesa egl available? yes
Single card detected
Kernel Module is not loaded
Nothing to do
No change - nothing to do


============================ Disks SMART Attributes ===========================

### ATA disks: sda

# Drive sda:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-81-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Scorpio Blue Serial ATA
Device Model:     WDC WD3200BEVT-22ZCT0
LU WWN Device Id: 5 0014ee 201ceb7eb
Firmware Version: 11.01A11
User Capacity:    320 072 933 376 bytes [320 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    5400 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS (minor revision not indicated)
SATA Version is:  SATA 2.5, 3.0 Gb/s
Local Time is:    Wed Jun 21 17:32:10 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR-K   200   200   051    -    1
  3 Spin_Up_Time            POS--K   186   185   021    -    1666
  4 Start_Stop_Count        -O--CK   097   097   000    -    3354
  9 Power_On_Hours          -O--CK   085   085   000    -    11064
 12 Power_Cycle_Count       -O--CK   097   097   000    -    3343
192 Power-Off_Retract_Count -O--CK   200   200   000    -    305
193 Load_Cycle_Count        -O--CK   162   162   000    -    114086
194 Temperature_Celsius     -O---K   114   086   000    -    33
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

SMART Error Log Version: 1
ATA Error Count: 3
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 3 occurred at disk power-on lifetime: 11004 hours (458 days + 12 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 93 37 38 40  Error: UNC at LBA = 0x00383793 = 3684243

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 90 40 37 38 00 08      00:14:49.921  READ FPDMA QUEUED
  60 00 88 40 36 38 00 08      00:14:49.921  READ FPDMA QUEUED
  60 40 80 c0 12 38 00 08      00:14:49.908  READ FPDMA QUEUED
  60 40 78 c0 34 38 00 08      00:14:49.908  READ FPDMA QUEUED
  60 40 70 80 2f 38 00 08      00:14:49.907  READ FPDMA QUEUED

Error 2 occurred at disk power-on lifetime: 10592 hours (441 days + 8 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 31 a6 c3 40  Error: UNC at LBA = 0x00c3a631 = 12822065

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 10 10 30 a6 c3 24 08      02:34:03.081  READ FPDMA QUEUED
  60 20 08 00 a6 c3 24 08      02:34:03.081  READ FPDMA QUEUED
  60 20 00 a0 44 c4 24 08      02:34:03.080  READ FPDMA QUEUED
  60 10 f0 c0 44 c4 24 08      02:34:03.080  READ FPDMA QUEUED
  60 10 e8 d0 44 c4 24 08      02:34:03.080  READ FPDMA QUEUED

Error 1 occurred at disk power-on lifetime: 10592 hours (441 days + 8 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  01 51 00 26 a6 c3 40  Error: AMNF at LBA = 0x00c3a626 = 12822054

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 28 a0 60 6b e5 0b 08      02:33:54.072  READ FPDMA QUEUED
  60 10 98 40 6b e5 0b 08      02:33:54.072  READ FPDMA QUEUED
  60 18 90 70 6a e5 0b 08      02:33:54.072  READ FPDMA QUEUED
  60 10 88 20 a6 c3 24 08      02:33:54.050  READ FPDMA QUEUED
  60 20 80 e0 fc 84 0d 08      02:33:54.041  READ FPDMA QUEUED

La config me paraît suffisante pour Lubuntu 16.04. C'est surtout par un coup de tournevis qu'il faut commencer du coup en effet smile
Un tuto que j'ai trouvé, qui permet d'accéder au ventilateur : https://www.youtube.com/watch?v=A8Y3vJ5hzVU

Hors ligne

#6 Le 25/06/2017, à 17:11

lmdlg

Re : [Résolu] Ventilateur d'un Fujistu-Siemens AmiloP et Lubuntu

Bonjour,

@Michel_04 et @Caribou22 merci beaucoup, ce tuto m'a permis de nettoyer correctement le ventilo qui est silencieux, désormais, c'est assez bluffant. En revanche, je n'ai pas osé changer la pâte thermique, mais comme j'ai démonté le PC une première fois, je saurai refaire, si d'aventure sa chauffe ne me convenait pas. Mais pour l'instant ça va. impecc'.
Merci encore, ce PC-portable va pouvoir faire encore 8 ans ! smile

à bientôt !

Dernière modification par lmdlg (Le 25/06/2017, à 17:12)


Lenovo G70-35 – Xubuntu 18.04.1 / bépoète

Hors ligne

#7 Le 26/06/2017, à 12:44

Caribou22

Re : [Résolu] Ventilateur d'un Fujistu-Siemens AmiloP et Lubuntu

Bonne nouvelle ! smile
Je n'ai jamais osé changer la pâte thermique non plus, mais le dépoussiérage fait déjà beaucoup de bien wink

Hors ligne