Boot trop lent

hibou7 · Le 26/02/2018, à 21:09

Bonsoir tout le monde

je suis assez content de mon Xubuntu 16.04, installé avec un mini-iso.
Néanmoins je trouve le temps de boot un peu long et j'essaye actuellement d'améliorer les choses.
Mes specs sont dans mon profil, la connexion est filaire. Voici la fin de mon dmesg:

[   23.884280] Adding 2096124k swap on /dev/sda5.  Priority:-1 extents:1 across:2096124k FS
[   41.529915] usblp 1-3:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x5A11
[   41.531619] usbcore: registered new interface driver usblp
[   41.624474] IPv6: ADDRCONF(NETDEV_UP): enp0s7: link is not ready
[   41.636733] r8169 0000:00:07.0 enp0s7: link down
[   41.636808] IPv6: ADDRCONF(NETDEV_UP): enp0s7: link is not ready
[   41.639068] r8169 0000:00:07.0 enp0s7: link down
[   59.259129] r8169 0000:00:07.0 enp0s7: link up
[   59.259152] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s7: link becomes ready
[   59.943929] atkbd serio0: Unknown key pressed (translated set 2, code 0x5b on isa0060/serio0).
[   59.943937] atkbd serio0: Use 'setkeycodes 5b <keycode>' to make it known.

Il semble que c'est l'ipv6 qui prend beaucoup de temps à la fin du boot.
J'ai pensé le désactiver. Or, la commande ip a | grep inet6 ne donne aucun retour sur cette machine.
https://doc.ubuntu-fr.org/optimisation# … pport_ipv6
Ipv6 a donc l'air désactivé.

Pour en avoir le coeur net j'ai encore testé trois méthodes pour désactiver ipv6:
1. celle décrite ici
2. Celle-ci et enfin
3. cette dernière.

À chaque fois, ça donne 2-3 sec de plus ou de moins au démarrage.
Je suis un peu au bout de mes compétences, si quelqu'un comprend pourquoi cet ipv6 aparaît en fin de boot, ça m'aidera beaucoup.

Merci d'avance

Dernière modification par hibou7 (Le 26/02/2018, à 21:14)

moko138 · Le 27/02/2018, à 09:22

[   23.884280] Adding 2096124k swap on /dev/sda5.  Priority:-1 extents:1 across:2096124k FS
###      Trou de 18 secondes
[   41.529915] usblp 1-3:1.1: usblp0: USB Bidirectional printer

1) Et si tu débranches ton imprimante ? (*)

2) Que donne

cat /boot/grub/grub.cfg | wc -l

?

3) Il peut y avoir tant d'éléments explicatifs dans un dmesg, que le donner incomplet a peu de sens.
(Par exemple, combien de temps ont pris le ou les fsck éventuel(s) pendant le dernier démarrage ? (Chez moi, il n'est pas nommé mais on voit sa trace aux lignes "recovery complete".)
Combien de temps a pris "Calling CRDA for country" ?)

4) Contenu du fstab ?

___
(*) Si la conservation des paramètres de la dernière session est activée,
sans doute faudra-t-il aussi la désactiver et redémarrer plus d'une fois.

Dernière modification par moko138 (Le 27/02/2018, à 09:23)

hibou7 · Le 27/02/2018, à 21:44

Salut moko138

merci de t'intéresser à mon problème.
Je me permets de répondre dans un ordre un peu différent.

Voici tout d'abord le dmesg avec imprimante branchée en USB:

:~$ dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.0-116-generic (buildd@lgw01-amd64-023) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.9) ) #140-Ubuntu SMP Mon Feb 12 21:22:43 UTC 2018 (Ubuntu 4.4.0-116.140-generic 4.4.98)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dffeffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dfff0000-0x00000000dfff7fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000dfff8000-0x00000000dfffffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fff80000-0x00000000ffffffff] reserved
[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[    0.000000] Legacy DMI 2.3 present.
[    0.000000] DMI: MSI MS-7008/MS-7008, BIOS Version 07.00T 04/02/01
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0xdfff0 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0C0000000 mask FE0000000 write-back
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- UC  
[    0.000000] found SMP MP-table at [mem 0x000fb950-0x000fb95f] mapped at [c00fb950]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] initial memory mapped: [mem 0x00000000-0x021fffff]
[    0.000000] Base memory trampoline at [c0099000] 99000 size 16384
[    0.000000] BRK [0x01d80000, 0x01d80fff] PGTABLE
[    0.000000] BRK [0x01d81000, 0x01d81fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x3378e000-0x35bbefff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F9FB0 000014 (v00 AMI   )
[    0.000000] ACPI: RSDT 0x00000000DFFF0000 00002C (v01 AMIINT VIA_P6   00000010 MSFT 00000097)
[    0.000000] ACPI: FACP 0x00000000DFFF0030 000081 (v01 AMIINT VIA_P6   00000011 MSFT 00000097)
[    0.000000] ACPI: DSDT 0x00000000DFFF0120 0034FC (v01 VIA    APOLLO-P 00001000 MSFT 0100000D)
[    0.000000] ACPI: FACS 0x00000000DFFF8000 000040
[    0.000000] ACPI: APIC 0x00000000DFFF00C0 00005C (v01 AMIINT VIA_P6   00000009 MSFT 00000097)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 2691MB HIGHMEM available.
[    0.000000] 891MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 37bfe000
[    0.000000]   low ram: 0 - 37bfe000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x0000000037bfdfff]
[    0.000000]   HighMem  [mem 0x0000000037bfe000-0x00000000dffeffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000dffeffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000000dffeffff]
[    0.000000] On node 0 totalpages: 917390
[    0.000000]   DMA zone: 40 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 2190 pages used for memmap
[    0.000000]   Normal zone: 224254 pages, LIFO batch:31
[    0.000000]   HighMem zone: 689138 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] e820: [mem 0xe0000000-0xfebfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 19 pages/cpu @f5db1000 s47436 r0 d30388 u77824
[    0.000000] pcpu-alloc: s47436 r0 d30388 u77824 alloc=19*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 915160
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-116-generic root=UUID=0bed8108-6a90-4460-adae-b8554d3f5afa ro splash quiet vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (00037bfe:000dfff0)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 3581640K/3669560K available (8007K kernel code, 781K rwdata, 3172K rodata, 948K init, 800K bss, 87920K reserved, 0K cma-reserved, 2756552K highmem)
[    0.000000] virtual kernel memory layout:
                   fixmap  : 0xfff15000 - 0xfffff000   ( 936 kB)
                   pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
                   vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
                   lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
                     .init : 0xc1bb2000 - 0xc1c9f000   ( 948 kB)
                     .data : 0xc17d2134 - 0xc1bb0780   (3961 kB)
                     .text : 0xc1000000 - 0xc17d2134   (8008 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 32.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
[    0.000000] NR_IRQS:2304 nr_irqs:440 16
[    0.000000] CPU 0 irqstacks, hard=f2c38000 soft=f2c3a000
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 3670016 bytes of page_ext
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3013.461 MHz processor
[    0.004028] Calibrating delay loop (skipped), value calculated using timer frequency.. 6026.92 BogoMIPS (lpj=12053844)
[    0.004037] pid_max: default: 32768 minimum: 301
[    0.004063] ACPI: Core revision 20150930
[    0.011024] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.011070] Security Framework initialized
[    0.011076] Yama: becoming mindful.
[    0.011114] AppArmor: AppArmor initialized
[    0.011203] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.011209] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.011705] Initializing cgroup subsys io
[    0.011715] Initializing cgroup subsys memory
[    0.011731] Initializing cgroup subsys devices
[    0.011740] Initializing cgroup subsys freezer
[    0.011747] Initializing cgroup subsys net_cls
[    0.011753] Initializing cgroup subsys perf_event
[    0.011761] Initializing cgroup subsys net_prio
[    0.011770] Initializing cgroup subsys hugetlb
[    0.011776] Initializing cgroup subsys pids
[    0.011816] CPU: Physical Processor ID: 0
[    0.011821] CPU: Processor Core ID: 0
[    0.011831] FEATURE SPEC_CTRL Not Present
[    0.011837] mce: CPU supports 4 MCE banks
[    0.011855] CPU0: Thermal monitoring enabled (TM1)
[    0.011864] process: using mwait in idle threads
[    0.011879] Last level iTLB entries: 4KB 64, 2MB 64, 4MB 64
[    0.011884] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64, 1GB 0
[    0.011891] Spectre V2 mitigation: Mitigation: Full generic retpoline
[    0.011895] Spectre V2 mitigation: Speculation control IBPB not-supported IBRS not-supported
[    0.012916] Freeing SMP alternatives memory: 28K
[    0.016948] ftrace: allocating 31457 entries in 62 pages
[    0.056189] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.056197] smpboot: Max logical packages: 2
[    0.056204] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.057364] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.100000] smpboot: CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz (family: 0xf, model: 0x3, stepping: 0x3)
[    0.100000] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[    0.100000] ... version:                0
[    0.100000] ... bit width:              40
[    0.100000] ... generic registers:      18
[    0.100000] ... value mask:             000000ffffffffff
[    0.100000] ... max period:             0000007fffffffff
[    0.100000] ... fixed-purpose events:   0
[    0.100000] ... event mask:             000000000003ffff
[    0.100000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.100000] CPU 1 irqstacks, hard=f24c6000 soft=f24d0000
[    0.100000] x86: Booting SMP configuration:
[    0.100000] .... node  #0, CPUs:      #1
[    0.008000] Initializing CPU#1
[    0.111497] x86: Booted up 1 node, 2 CPUs
[    0.111507] smpboot: Total of 2 processors activated (12053.84 BogoMIPS)
[    0.112171] devtmpfs: initialized
[    0.112727] evm: security.selinux
[    0.112731] evm: security.SMACK64
[    0.112733] evm: security.SMACK64EXEC
[    0.112735] evm: security.SMACK64TRANSMUTE
[    0.112738] evm: security.SMACK64MMAP
[    0.112740] evm: security.ima
[    0.112742] evm: security.capability
[    0.112908] PM: Registering ACPI NVS region [mem 0xdfff8000-0xdfffffff] (32768 bytes)
[    0.113072] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.113083] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.113232] pinctrl core: initialized pinctrl subsystem
[    0.113473] RTC time: 10:52:11, date: 02/27/18
[    0.113691] NET: Registered protocol family 16
[    0.114068] EISA bus registered
[    0.120007] cpuidle: using governor ladder
[    0.132010] cpuidle: using governor menu
[    0.132018] PCCT header not found.
[    0.132170] ACPI: bus type PCI registered
[    0.132175] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.135694] PCI: PCI BIOS revision 2.10 entry at 0xfdb11, last bus=1
[    0.135698] PCI: Using configuration type 1 for base access
[    0.148344] ACPI: Added _OSI(Module Device)
[    0.148350] ACPI: Added _OSI(Processor Device)
[    0.148354] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.148357] ACPI: Added _OSI(Processor Aggregator Device)
[    0.154786] ACPI: Interpreter enabled
[    0.154826] ACPI: (supports S0 S1 S3 S4 S5)
[    0.154830] ACPI: Using IOAPIC for interrupt routing
[    0.154879] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.157779] ACPI: Power Resource [URP1] (off)
[    0.159190] ACPI: Power Resource [URP2] (off)
[    0.159275] ACPI: Power Resource [FDDP] (off)
[    0.159359] ACPI: Power Resource [LPTP] (off)
[    0.162706] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.162717] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[    0.162728] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.162736] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.162821] acpi PNP0A03:00: host bridge window expanded to [mem 0xe0000000-0xffdfffff window]; [mem 0xfee01000-0xffdfffff window] ignored
[    0.163099] PCI host bridge to bus 0000:00
[    0.163105] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.163109] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.163113] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.163117] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.163121] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffdfffff window]
[    0.163126] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.163147] pci 0000:00:00.0: [1106:0258] type 00 class 0x060000
[    0.163171] pci 0000:00:00.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
[    0.163352] pci 0000:00:00.1: [1106:1258] type 00 class 0x060000
[    0.163523] pci 0000:00:00.2: [1106:2258] type 00 class 0x060000
[    0.163688] pci 0000:00:00.3: [1106:3258] type 00 class 0x060000
[    0.163851] pci 0000:00:00.4: [1106:4258] type 00 class 0x060000
[    0.164040] pci 0000:00:00.7: [1106:7258] type 00 class 0x060000
[    0.164217] pci 0000:00:01.0: [1106:b198] type 01 class 0x060400
[    0.164279] pci 0000:00:01.0: supports D1
[    0.164410] pci 0000:00:07.0: [10ec:8169] type 00 class 0x020000
[    0.164439] pci 0000:00:07.0: reg 0x10: [io  0xd400-0xd4ff]
[    0.164452] pci 0000:00:07.0: reg 0x14: [mem 0xfebfff00-0xfebfffff]
[    0.164499] pci 0000:00:07.0: reg 0x30: [mem 0xfebc0000-0xfebdffff pref]
[    0.164528] pci 0000:00:07.0: supports D1 D2
[    0.164533] pci 0000:00:07.0: PME# supported from D1 D2 D3hot D3cold
[    0.164685] pci 0000:00:0d.0: [1106:3044] type 00 class 0x0c0010
[    0.164714] pci 0000:00:0d.0: reg 0x10: [mem 0xfebee800-0xfebeefff]
[    0.164727] pci 0000:00:0d.0: reg 0x14: [io  0xd000-0xd07f]
[    0.164800] pci 0000:00:0d.0: supports D2
[    0.164805] pci 0000:00:0d.0: PME# supported from D2 D3hot D3cold
[    0.164948] pci 0000:00:0f.0: [1106:3149] type 00 class 0x010400
[    0.164977] pci 0000:00:0f.0: reg 0x10: [io  0xec00-0xec07]
[    0.164990] pci 0000:00:0f.0: reg 0x14: [io  0xe800-0xe803]
[    0.165003] pci 0000:00:0f.0: reg 0x18: [io  0xe400-0xe407]
[    0.165015] pci 0000:00:0f.0: reg 0x1c: [io  0xe000-0xe003]
[    0.165028] pci 0000:00:0f.0: reg 0x20: [io  0xdc00-0xdc0f]
[    0.165041] pci 0000:00:0f.0: reg 0x24: [io  0xd800-0xd8ff]
[    0.165211] pci 0000:00:0f.1: [1106:0571] type 00 class 0x01018a
[    0.165276] pci 0000:00:0f.1: reg 0x20: [io  0xfc00-0xfc0f]
[    0.165302] pci 0000:00:0f.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.165305] pci 0000:00:0f.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.165309] pci 0000:00:0f.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.165312] pci 0000:00:0f.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.165478] pci 0000:00:10.0: [1106:3038] type 00 class 0x0c0300
[    0.165539] pci 0000:00:10.0: reg 0x20: [io  0xc000-0xc01f]
[    0.165584] pci 0000:00:10.0: supports D1 D2
[    0.165588] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.165654] pci 0000:00:10.0: System wakeup disabled by ACPI
[    0.165751] pci 0000:00:10.1: [1106:3038] type 00 class 0x0c0300
[    0.165812] pci 0000:00:10.1: reg 0x20: [io  0xc400-0xc41f]
[    0.165857] pci 0000:00:10.1: supports D1 D2
[    0.165862] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.165924] pci 0000:00:10.1: System wakeup disabled by ACPI
[    0.166026] pci 0000:00:10.2: [1106:3038] type 00 class 0x0c0300
[    0.166086] pci 0000:00:10.2: reg 0x20: [io  0xc800-0xc81f]
[    0.166132] pci 0000:00:10.2: supports D1 D2
[    0.166136] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.166201] pci 0000:00:10.2: System wakeup disabled by ACPI
[    0.166300] pci 0000:00:10.3: [1106:3038] type 00 class 0x0c0300
[    0.166361] pci 0000:00:10.3: reg 0x20: [io  0xcc00-0xcc1f]
[    0.166406] pci 0000:00:10.3: supports D1 D2
[    0.166410] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.166472] pci 0000:00:10.3: System wakeup disabled by ACPI
[    0.166571] pci 0000:00:10.4: [1106:3104] type 00 class 0x0c0320
[    0.166600] pci 0000:00:10.4: reg 0x10: [mem 0xfebffd00-0xfebffdff]
[    0.166678] pci 0000:00:10.4: supports D1 D2
[    0.166683] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[    0.166745] pci 0000:00:10.4: System wakeup disabled by ACPI
[    0.166847] pci 0000:00:11.0: [1106:3227] type 00 class 0x060100
[    0.166931] HPET not enabled in BIOS. You might try hpet=force boot option
[    0.167095] pci 0000:00:11.5: [1106:3059] type 00 class 0x040100
[    0.167123] pci 0000:00:11.5: reg 0x10: [io  0xbc00-0xbcff]
[    0.167205] pci 0000:00:11.5: supports D1 D2
[    0.167269] pci 0000:00:11.5: System wakeup disabled by ACPI
[    0.167455] pci 0000:01:00.0: [10de:0322] type 00 class 0x030000
[    0.167485] pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
[    0.167497] pci 0000:01:00.0: reg 0x14: [mem 0xe8000000-0xefffffff pref]
[    0.167536] pci 0000:01:00.0: reg 0x30: [mem 0xfeae0000-0xfeafffff pref]
[    0.167679] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.167688] pci 0000:00:01.0:   bridge window [mem 0xfca00000-0xfeafffff]
[    0.167694] pci 0000:00:01.0:   bridge window [mem 0xe7f00000-0xf7efffff pref]
[    0.167706] pci_bus 0000:00: on NUMA node 0
[    0.168733] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.168853] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 *12 14 15)
[    0.168971] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.169088] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.169208] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.169330] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.169453] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.169577] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.170022] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.170022] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.170022] vgaarb: loaded
[    0.170022] vgaarb: bridge control possible 0000:01:00.0
[    0.170022] SCSI subsystem initialized
[    0.170022] libata version 3.00 loaded.
[    0.170022] ACPI: bus type USB registered
[    0.170022] usbcore: registered new interface driver usbfs
[    0.170022] usbcore: registered new interface driver hub
[    0.170022] usbcore: registered new device driver usb
[    0.170022] PCI: Using ACPI for IRQ routing
[    0.170022] PCI: pci_cache_line_size set to 64 bytes
[    0.170022] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.170022] e820: reserve RAM buffer [mem 0xdfff0000-0xdfffffff]
[    0.170022] NetLabel: Initializing
[    0.170022] NetLabel:  domain hash size = 128
[    0.170022] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.170022] NetLabel:  unlabeled traffic allowed by default
[    0.170022] amd_nb: Cannot enumerate AMD northbridges
[    0.170022] clocksource: Switched to clocksource refined-jiffies
[    0.189482] AppArmor: AppArmor Filesystem Enabled
[    0.189645] pnp: PnP ACPI init
[    0.190110] system 00:00: [io  0x0290-0x0297] has been reserved
[    0.190117] system 00:00: [io  0x03f0-0x03f1] has been reserved
[    0.190122] system 00:00: [io  0x04d0-0x04d1] has been reserved
[    0.190127] system 00:00: [io  0x0400-0x040f] has been reserved
[    0.190131] system 00:00: [io  0x0820-0x0821] has been reserved
[    0.190138] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.190147] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.190254] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.190372] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.190502] pnp 00:03: [dma 2]
[    0.190593] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.190997] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.191519] pnp 00:05: [dma 3]
[    0.191665] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.192043] pnp: PnP ACPI: found 6 devices
[    0.192052] PnPBIOS: Disabled by ACPI PNP
[    0.231264] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.231291] clocksource: Switched to clocksource acpi_pm
[    0.231327] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.231337] pci 0000:00:01.0:   bridge window [mem 0xfca00000-0xfeafffff]
[    0.231344] pci 0000:00:01.0:   bridge window [mem 0xe7f00000-0xf7efffff pref]
[    0.231356] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.231360] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.231364] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.231368] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.231371] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xffdfffff window]
[    0.231376] pci_bus 0000:01: resource 1 [mem 0xfca00000-0xfeafffff]
[    0.231379] pci_bus 0000:01: resource 2 [mem 0xe7f00000-0xf7efffff pref]
[    0.231433] NET: Registered protocol family 2
[    0.231749] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.231777] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.231825] TCP: Hash tables configured (established 8192 bind 8192)
[    0.231881] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.231896] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.231978] NET: Registered protocol family 1
[    0.231978] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[    0.231978] pci 0000:00:11.0: Bypassing VIA 8237 APIC De-Assert Message
[    0.231978] pci 0000:01:00.0: Video device with shadowed ROM
[    0.231978] PCI: CLS 32 bytes, default 64
[    0.231978] Unpacking initramfs...
[    1.314990] Freeing initrd memory: 37060K
[    1.315351] Scanning for low memory corruption every 60 seconds
[    1.316176] audit: initializing netlink subsys (disabled)
[    1.316217] audit: type=2000 audit(1519728732.315:1): initialized
[    1.316713] Initialise system trusted keyring
[    1.316950] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.320887] zbud: loaded
[    1.321174] VFS: Disk quotas dquot_6.6.0
[    1.321261] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.321821] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.322429] fuse init (API version 7.23)
[    1.322782] Key type big_key registered
[    1.322816] Allocating IMA MOK and blacklist keyrings.
[    1.323631] Key type asymmetric registered
[    1.323638] Asymmetric key parser 'x509' registered
[    1.323667] bounce: pool size: 64 pages
[    1.323754] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.323828] io scheduler noop registered
[    1.323834] io scheduler deadline registered (default)
[    1.323916] io scheduler cfq registered
[    1.324243] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.324263] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.324346] efifb: probing for efifb
[    1.324352] efifb: cannot reserve video memory at 0xa0000
[    1.324357] efifb: framebuffer at 0xa0000, mapped to 0xc00a0000, using 64k, total 64k
[    1.324361] efifb: mode is 640x480x1, linelength=80, pages=1
[    1.324363] efifb: scrolling: redraw
[    1.324366] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.324563] Console: switching to colour frame buffer device 80x30
[    1.324580] fb0: EFI VGA frame buffer device
[    1.324747] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.324756] ACPI: Power Button [PWRB]
[    1.324879] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    1.324885] ACPI: Sleep Button [SLPB]
[    1.324980] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.324985] ACPI: Power Button [PWRF]
[    1.325335] GHES: HEST is not enabled!
[    1.325397] isapnp: Scanning for PnP cards...
[    1.325582] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.345992] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.350235] Linux agpgart interface v0.103
[    1.350436] agpgart: Detected VIA PT880 chipset
[    1.354026] agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
[    1.362799] loop: module loaded
[    1.363473] libphy: Fixed MDIO Bus: probed
[    1.363481] tun: Universal TUN/TAP device driver, 1.6
[    1.363484] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.363599] PPP generic driver version 2.4.2
[    1.363762] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.363773] ehci-pci: EHCI PCI platform driver
[    1.364143] ehci-pci 0000:00:10.4: EHCI Host Controller
[    1.364161] ehci-pci 0000:00:10.4: new USB bus registered, assigned bus number 1
[    1.364238] ehci-pci 0000:00:10.4: irq 21, io mem 0xfebffd00
[    1.376035] ehci-pci 0000:00:10.4: USB 2.0 started, EHCI 1.00
[    1.376167] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.376174] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.376179] usb usb1: Product: EHCI Host Controller
[    1.376184] usb usb1: Manufacturer: Linux 4.4.0-116-generic ehci_hcd
[    1.376189] usb usb1: SerialNumber: 0000:00:10.4
[    1.376504] hub 1-0:1.0: USB hub found
[    1.376522] hub 1-0:1.0: 8 ports detected
[    1.377054] ehci-platform: EHCI generic platform driver
[    1.377088] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.377099] ohci-pci: OHCI PCI platform driver
[    1.377136] ohci-platform: OHCI generic platform driver
[    1.377161] uhci_hcd: USB Universal Host Controller Interface driver
[    1.377418] uhci_hcd 0000:00:10.0: UHCI Host Controller
[    1.377431] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[    1.377442] uhci_hcd 0000:00:10.0: detected 2 ports
[    1.377467] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000c000
[    1.377569] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.377576] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.377581] usb usb2: Product: UHCI Host Controller
[    1.377585] usb usb2: Manufacturer: Linux 4.4.0-116-generic uhci_hcd
[    1.377590] usb usb2: SerialNumber: 0000:00:10.0
[    1.377888] hub 2-0:1.0: USB hub found
[    1.377906] hub 2-0:1.0: 2 ports detected
[    1.378364] uhci_hcd 0000:00:10.1: UHCI Host Controller
[    1.378377] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[    1.378387] uhci_hcd 0000:00:10.1: detected 2 ports
[    1.378412] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000c400
[    1.378512] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.378518] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.378523] usb usb3: Product: UHCI Host Controller
[    1.378528] usb usb3: Manufacturer: Linux 4.4.0-116-generic uhci_hcd
[    1.378533] usb usb3: SerialNumber: 0000:00:10.1
[    1.378811] hub 3-0:1.0: USB hub found
[    1.378830] hub 3-0:1.0: 2 ports detected
[    1.379285] uhci_hcd 0000:00:10.2: UHCI Host Controller
[    1.379298] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[    1.379308] uhci_hcd 0000:00:10.2: detected 2 ports
[    1.379332] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000c800
[    1.379431] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.379437] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.379441] usb usb4: Product: UHCI Host Controller
[    1.379446] usb usb4: Manufacturer: Linux 4.4.0-116-generic uhci_hcd
[    1.379451] usb usb4: SerialNumber: 0000:00:10.2
[    1.379733] hub 4-0:1.0: USB hub found
[    1.379750] hub 4-0:1.0: 2 ports detected
[    1.380245] uhci_hcd 0000:00:10.3: UHCI Host Controller
[    1.380259] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[    1.380269] uhci_hcd 0000:00:10.3: detected 2 ports
[    1.380295] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000cc00
[    1.380393] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.380399] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.380404] usb usb5: Product: UHCI Host Controller
[    1.380409] usb usb5: Manufacturer: Linux 4.4.0-116-generic uhci_hcd
[    1.380414] usb usb5: SerialNumber: 0000:00:10.3
[    1.380703] hub 5-0:1.0: USB hub found
[    1.380720] hub 5-0:1.0: 2 ports detected
[    1.381124] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    1.381128] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    1.381410] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.381693] mousedev: PS/2 mouse device common for all mice
[    1.382103] rtc_cmos 00:01: RTC can wake from S4
[    1.382356] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    1.382407] rtc_cmos 00:01: alarms up to one year, y3k, 114 bytes nvram
[    1.382430] i2c /dev entries driver
[    1.382589] device-mapper: uevent: version 1.0.3
[    1.382764] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    1.382832] platform eisa.0: Probing EISA bus 0
[    1.382839] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    1.382845] platform eisa.0: Cannot allocate resource for EISA slot 1
[    1.382850] platform eisa.0: Cannot allocate resource for EISA slot 2
[    1.382855] platform eisa.0: Cannot allocate resource for EISA slot 3
[    1.382861] platform eisa.0: Cannot allocate resource for EISA slot 4
[    1.382866] platform eisa.0: Cannot allocate resource for EISA slot 5
[    1.382871] platform eisa.0: Cannot allocate resource for EISA slot 6
[    1.382876] platform eisa.0: Cannot allocate resource for EISA slot 7
[    1.382881] platform eisa.0: Cannot allocate resource for EISA slot 8
[    1.382886] platform eisa.0: EISA: Detected 0 cards
[    1.382920] cpufreq-nforce2: No nForce2 chipset.
[    1.382938] ledtrig-cpu: registered to indicate activity on CPUs
[    1.383651] NET: Registered protocol family 10
[    1.384211] NET: Registered protocol family 17
[    1.384241] Key type dns_resolver registered
[    1.384761] microcode: CPU0 sig=0xf33, pf=0x4, revision=0x7
[    1.384779] microcode: CPU1 sig=0xf33, pf=0x4, revision=0x7
[    1.384872] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.384894] Using IPI No-Shortcut mode
[    1.385250] registered taskstats version 1
[    1.385283] Loading compiled-in X.509 certificates
[    1.391745] Loaded X.509 cert 'Build time autogenerated kernel key: ff54afc682e3d37ddd1801097f0724ac37994f02'
[    1.391788] zswap: loaded using pool lzo/zbud
[    1.396932] Key type trusted registered
[    1.406183] Key type encrypted registered
[    1.406203] AppArmor: AppArmor sha1 policy hashing enabled
[    1.406213] ima: No TPM chip found, activating TPM-bypass!
[    1.406266] evm: HMAC attrs: 0x1
[    1.406764]   Magic number: 6:403:882
[    1.406929] rtc_cmos 00:01: setting system clock to 2018-02-27 10:52:13 UTC (1519728733)
[    1.407090] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.407421] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.407425] EDD information not available.
[    1.407557] PM: Hibernation image not present or could not be loaded.
[    1.679723] isapnp: No Plug & Play device found
[    1.680596] Freeing unused kernel memory: 948K
[    1.680737] Write protecting the kernel text: 8012k
[    1.680805] Write protecting the kernel read-only data: 3176k
[    1.688059] usb 1-3: new high-speed USB device number 2 using ehci-pci
[    1.707386] random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    1.707687] random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    1.709581] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    1.746628] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    1.746797] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    1.747380] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    1.747652] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    1.747898] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    1.748336] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    1.748602] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    1.828965] usb 1-3: New USB device found, idVendor=03f0, idProduct=5a11
[    1.828976] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.828982] usb 1-3: Product: Photosmart C7100 series
[    1.828988] usb 1-3: Manufacturer: HP
[    1.828994] usb 1-3: SerialNumber: MY6CIG71DM04KS
[    1.874925] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    1.918187] pata_via 0000:00:0f.1: version 0.3.4
[    1.942392] Floppy drive(s): fd0 is 1.44M
[    1.956355] scsi host0: pata_via
[    1.961148] scsi host1: pata_via
[    1.961368] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[    1.961375] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[    1.961531] sata_via 0000:00:0f.0: version 2.6
[    1.961846] sata_via 0000:00:0f.0: routed to hard irq line 11
[    1.967585] FDC 0 is a post-1991 82077
[    1.967673] scsi host2: sata_via
[    1.973561] scsi host3: sata_via
[    1.973734] ata3: SATA max UDMA/133 cmd 0xec00 ctl 0xe800 bmdma 0xdc00 irq 20
[    1.973740] ata4: SATA max UDMA/133 cmd 0xe400 ctl 0xe000 bmdma 0xdc08 irq 20
[    1.974647] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.974950] r8169 0000:00:07.0: PCI: Disallowing DAC for device
[    1.974977] r8169 0000:00:07.0 (unnamed net_device) (uninitialized): not PCI Express
[    1.975558] r8169 0000:00:07.0 eth0: RTL8110s at 0xf842ef00, 00:0c:76:bf:3d:7d, XID 04000000 IRQ 18
[    1.975568] r8169 0000:00:07.0 eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok]
[    1.984406] [drm] Initialized drm 1.1.0 20060810
[    2.044101] firewire_ohci 0000:00:0d.0: added OHCI v1.0 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[    2.075157] usb 3-2: new low-speed USB device number 2 using uhci_hcd
[    2.094973] r8169 0000:00:07.0 enp0s7: renamed from eth0
[    2.095629] wmi: Mapper loaded
[    2.176040] ata3: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[    2.227644] checking generic (a0000 10000) vs hw (e8000000 8000000)
[    2.227651] fb: switching to nouveaufb from EFI VGA
[    2.227706] Console: switching to colour dummy device 80x25
[    2.228233] nouveau 0000:01:00.0: NVIDIA NV34 (034200a2)
[    2.312045] tsc: Refined TSC clocksource calibration: 3013.555 MHz
[    2.312055] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b704a318ab, max_idle_ns: 440795299904 ns
[    2.316973] nouveau 0000:01:00.0: bios: version 04.34.20.16.00
[    2.318174] agpgart-via 0000:00:00.0: AGP 3.5 bridge
[    2.318195] agpgart: systemd-udevd tried to set rate=x12. Setting to AGP3 x8 mode.
[    2.318210] agpgart-via 0000:00:00.0: putting AGP V3 device into 8x mode
[    2.318289] nouveau 0000:01:00.0: putting AGP V3 device into 8x mode
[    2.318432] agpgart-via 0000:00:00.0: AGP 3.5 bridge
[    2.318450] agpgart: systemd-udevd tried to set rate=x12. Setting to AGP3 x8 mode.
[    2.318463] agpgart-via 0000:00:00.0: putting AGP V3 device into 8x mode
[    2.318540] nouveau 0000:01:00.0: putting AGP V3 device into 8x mode
[    2.318597] nouveau 0000:01:00.0: tmr: unknown input clock freq
[    2.318613] nouveau 0000:01:00.0: fb: 128 MiB DDR1
[    2.324163] usb 3-2: New USB device found, idVendor=046d, idProduct=c03d
[    2.324176] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.324188] usb 3-2: Product: USB-PS/2 Optical Mouse
[    2.324198] usb 3-2: Manufacturer: Logitech
[    2.326425] [TTM] Zone  kernel: Available graphics memory: 431562 kiB
[    2.326430] [TTM] Zone highmem: Available graphics memory: 1809838 kiB
[    2.326433] [TTM] Initializing pool allocator
[    2.326445] [TTM] Initializing DMA pool allocator
[    2.326472] nouveau 0000:01:00.0: DRM: VRAM: 127 MiB
[    2.326477] nouveau 0000:01:00.0: DRM: GART: 64 MiB
[    2.326482] nouveau 0000:01:00.0: DRM: BMP version 5.38
[    2.326487] nouveau 0000:01:00.0: DRM: DCB version 2.2
[    2.326492] nouveau 0000:01:00.0: DRM: DCB outp 00: 01010300 00009c40
[    2.326497] nouveau 0000:01:00.0: DRM: DCB outp 01: 02020321 00000033
[    2.326593] nouveau 0000:01:00.0: DRM: Loading NV17 power sequencing microcode
[    2.329287] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.329296] [drm] Driver supports precise vblank timestamp query.
[    2.334083] nouveau 0000:01:00.0: DRM: MM: using M2MF for buffer copies
[    2.334108] nouveau 0000:01:00.0: DRM: Setting dpms mode 3 on TV encoder (output 1)
[    2.352956] hidraw: raw HID events driver (C) Jiri Kosina
[    2.378779] usbcore: registered new interface driver usbhid
[    2.378786] usbhid: USB HID core driver
[    2.385487] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.0/0003:046D:C03D.0001/input/input4
[    2.385839] hid-generic 0003:046D:C03D.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.1-2/input0
[    2.392512] nouveau 0000:01:00.0: DRM: allocated 1024x768 fb: 0x9000, bo f1261000
[    2.392703] fbcon: nouveaufb (fb0) is primary device
[    2.392874] Console: switching to colour frame buffer device 128x48
[    2.392926] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[    2.404056] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[    2.404422] ata2.00: ATAPI: LITE-ON CD-RW SOHR-5238S, 4S04, max UDMA/33
[    2.404436] ata2.01: ATAPI: LITE-ON DVD SOHD-167T, 9S13, max UDMA/33
[    2.420256] ata2.00: configured for UDMA/33
[    2.420707] ata2.01: configured for UDMA/33
[    2.422355] scsi 1:0:0:0: CD-ROM            LITE-ON  CD-RW SOHR-5238S 4S04 PQ: 0 ANSI: 5
[    2.436899] sr 1:0:0:0: [sr0] scsi3-mmc drive: 174x/52x writer cd/rw xa/form2 cdda tray
[    2.436905] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.437266] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.437577] sr 1:0:0:0: Attached scsi generic sg0 type 5
[    2.438437] scsi 1:0:1:0: CD-ROM            LITE-ON  DVD SOHD-167T    9S13 PQ: 0 ANSI: 5
[    2.452543] sr 1:0:1:0: [sr1] scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[    2.452940] sr 1:0:1:0: Attached scsi CD-ROM sr1
[    2.453262] sr 1:0:1:0: Attached scsi generic sg1 type 5
[    2.544213] firewire_core 0000:00:0d.0: created device fw0: GUID 00dc1000df045c00, S400
[    2.656028] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.710040] usb-storage 1-3:1.3: USB Mass Storage device detected
[    2.710515] scsi host4: usb-storage 1-3:1.3
[    2.710779] usbcore: registered new interface driver usb-storage
[    2.717271] usbcore: registered new interface driver uas
[    2.820403] ata4.00: ATA-7: Maxtor 6Y080M0, YAR51HW0, max UDMA/133
[    2.820410] ata4.00: 160086528 sectors, multi 16: LBA 
[    2.836379] ata4.00: configured for UDMA/133
[    2.836655] scsi 3:0:0:0: Direct-Access     ATA      Maxtor 6Y080M0   1HW0 PQ: 0 ANSI: 5
[    2.837348] sd 3:0:0:0: [sda] 160086528 512-byte logical blocks: (82.0 GB/76.3 GiB)
[    2.837493] sd 3:0:0:0: Attached scsi generic sg2 type 0
[    2.837513] sd 3:0:0:0: [sda] Write Protect is off
[    2.837523] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.837590] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.875899]  sda: sda1 sda2 < sda5 >
[    2.876802] sd 3:0:0:0: [sda] Attached SCSI disk
[    3.312177] clocksource: Switched to clocksource tsc
[    3.649568] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    3.708883] scsi 4:0:0:0: Direct-Access     HP       Photosmart C7180 1.00 PQ: 0 ANSI: 2
[    3.712231] sd 4:0:0:0: Attached scsi generic sg3 type 0
[    3.714747] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[    4.456214] random: nonblocking pool is initialized
[    5.206280] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    5.206549] systemd[1]: Detected architecture x86.
[    5.228436] systemd[1]: Set hostname to <greg-desktop>.
[    7.077302] systemd[1]: Listening on Journal Socket (/dev/log).
[    7.077474] systemd[1]: Listening on fsck to fsckd communication Socket.
[    7.077563] systemd[1]: Listening on udev Control Socket.
[    7.077654] systemd[1]: Listening on Journal Socket.
[    7.077968] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    7.078129] systemd[1]: Listening on Journal Audit Socket.
[    7.078157] systemd[1]: Reached target Remote File Systems (Pre).
[    7.078182] systemd[1]: Reached target Remote File Systems.
[    7.078411] systemd[1]: Created slice System Slice.
[    7.088432] systemd[1]: Started Braille Device Support.
[    7.090552] systemd[1]: Mounting Debug File System...
[    7.092402] systemd[1]: Starting Nameserver information manager...
[    7.094464] systemd[1]: Mounting POSIX Message Queue File System...
[    7.094759] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    7.172420] systemd[1]: Starting Load Kernel Modules...
[    7.172611] systemd[1]: Started Trigger resolvconf update for networkd DNS.
[    7.174311] systemd[1]: Starting Uncomplicated firewall...
[    7.176335] systemd[1]: Started Read required files in advance.
[    7.242989] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    7.480434] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    7.480496] systemd[1]: Reached target Encrypted Volumes.
[    7.480682] systemd[1]: Listening on Syslog Socket.
[    7.482967] systemd[1]: Starting Journal Service...
[    7.483147] systemd[1]: Listening on udev Kernel Socket.
[    7.485117] systemd[1]: Mounting Huge Pages File System...
[    7.485266] systemd[1]: Reached target User and Group Name Lookups.
[    7.487342] systemd[1]: Starting Set console keymap...
[    7.487697] systemd[1]: Created slice User and Session Slice.
[    7.487770] systemd[1]: Reached target Slices.
[    7.784602] systemd[1]: Started Uncomplicated firewall.
[    7.888506] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    7.900688] systemd[1]: Starting Create Static Device Nodes in /dev...
[    8.253231] lp: driver loaded but no devices found
[    8.274039] systemd[1]: Mounted POSIX Message Queue File System.
[    8.274154] systemd[1]: Mounted Debug File System.
[    8.274218] systemd[1]: Mounted Huge Pages File System.
[    8.336275] ppdev: user-space parallel port driver
[    8.408449] parport_pc 00:05: reported by Plug and Play ACPI
[    8.408561] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[    8.504468] systemd[1]: Started Nameserver information manager.
[    8.505517] lp0: using parport0 (interrupt-driven).
[    8.510411] systemd[1]: Reached target Network (Pre).
[    8.992846] systemd[1]: systemd-modules-load.service: Main process exited, code=exited, status=1/FAILURE
[    8.993484] systemd[1]: Failed to start Load Kernel Modules.
[    8.993725] systemd[1]: systemd-modules-load.service: Unit entered failed state.
[    8.993807] systemd[1]: systemd-modules-load.service: Failed with result 'exit-code'.
[    9.008542] systemd[1]: Starting Apply Kernel Variables...
[    9.010481] systemd[1]: Mounting FUSE Control File System...
[    9.020957] systemd[1]: Mounted FUSE Control File System.
[    9.184885] systemd[1]: Started Journal Service.
[   13.434816] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   13.886520] systemd-journald[223]: Received request to flush runtime journal from PID 1
[   15.896371] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   16.506284] ACPI Warning: SystemIO range 0x0000000000000400-0x0000000000000407 conflicts with OpRegion 0x0000000000000400-0x0000000000000406 (\SMOV) (20150930/utaddress-254)
[   16.506303] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   17.253894] MPU-401 device not found or device busy
[   23.063257] audit: type=1400 audit(1519728755.153:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=540 comm="apparmor_parser"
[   23.063284] audit: type=1400 audit(1519728755.153:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=540 comm="apparmor_parser"
[   23.063302] audit: type=1400 audit(1519728755.153:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=540 comm="apparmor_parser"
[   23.063319] audit: type=1400 audit(1519728755.153:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=540 comm="apparmor_parser"
[   23.554798] audit: type=1400 audit(1519728755.645:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=539 comm="apparmor_parser"
[   23.554828] audit: type=1400 audit(1519728755.645:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=539 comm="apparmor_parser"
[   24.188709] audit: type=1400 audit(1519728756.277:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=615 comm="apparmor_parser"
[   24.188741] audit: type=1400 audit(1519728756.277:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=615 comm="apparmor_parser"
[   24.188761] audit: type=1400 audit(1519728756.277:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//snap_update_ns" pid=615 comm="apparmor_parser"
[   24.581721] audit: type=1400 audit(1519728756.673:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/unreal-*/System/*.bin" pid=616 comm="apparmor_parser"
[   26.260253] Adding 2096124k swap on /dev/sda5.  Priority:-1 extents:1 across:2096124k FS
[   43.061955] IPv6: ADDRCONF(NETDEV_UP): enp0s7: link is not ready
[   43.072709] r8169 0000:00:07.0 enp0s7: link down
[   43.072726] r8169 0000:00:07.0 enp0s7: link down
[   43.072798] IPv6: ADDRCONF(NETDEV_UP): enp0s7: link is not ready
[   43.234427] usblp 1-3:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x5A11
[   43.234520] usbcore: registered new interface driver usblp
[   52.680744] usblp0: removed
[   52.694235] usblp 1-3:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x5A11
[   60.916638] r8169 0000:00:07.0 enp0s7: link up
[   60.916661] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s7: link becomes ready

Ensuite, j'ai débranché et éteint l'imprimante, je suis allé dans
Menu > Paramètres > Sessions et démarrage
Et là, sous l'onglet "Principal", j'ai décoché
"Enregistrer automatiquement la session lors de la déconnexion" et
"Invite à la déconnexion"

Aprés avoir redémarré 3x la machine, nouveau dmesg:

:~$ dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.0-116-generic (buildd@lgw01-amd64-023) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.9) ) #140-Ubuntu SMP Mon Feb 12 21:22:43 UTC 2018 (Ubuntu 4.4.0-116.140-generic 4.4.98)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dffeffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dfff0000-0x00000000dfff7fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000dfff8000-0x00000000dfffffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fff80000-0x00000000ffffffff] reserved
[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[    0.000000] Legacy DMI 2.3 present.
[    0.000000] DMI: MSI MS-7008/MS-7008, BIOS Version 07.00T 04/02/01
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0xdfff0 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0C0000000 mask FE0000000 write-back
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- UC  
[    0.000000] found SMP MP-table at [mem 0x000fb950-0x000fb95f] mapped at [c00fb950]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] initial memory mapped: [mem 0x00000000-0x021fffff]
[    0.000000] Base memory trampoline at [c0099000] 99000 size 16384
[    0.000000] BRK [0x01d80000, 0x01d80fff] PGTABLE
[    0.000000] BRK [0x01d81000, 0x01d81fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x3378e000-0x35bbefff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F9FB0 000014 (v00 AMI   )
[    0.000000] ACPI: RSDT 0x00000000DFFF0000 00002C (v01 AMIINT VIA_P6   00000010 MSFT 00000097)
[    0.000000] ACPI: FACP 0x00000000DFFF0030 000081 (v01 AMIINT VIA_P6   00000011 MSFT 00000097)
[    0.000000] ACPI: DSDT 0x00000000DFFF0120 0034FC (v01 VIA    APOLLO-P 00001000 MSFT 0100000D)
[    0.000000] ACPI: FACS 0x00000000DFFF8000 000040
[    0.000000] ACPI: APIC 0x00000000DFFF00C0 00005C (v01 AMIINT VIA_P6   00000009 MSFT 00000097)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 2691MB HIGHMEM available.
[    0.000000] 891MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 37bfe000
[    0.000000]   low ram: 0 - 37bfe000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x0000000037bfdfff]
[    0.000000]   HighMem  [mem 0x0000000037bfe000-0x00000000dffeffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000dffeffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000000dffeffff]
[    0.000000] On node 0 totalpages: 917390
[    0.000000]   DMA zone: 40 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 2190 pages used for memmap
[    0.000000]   Normal zone: 224254 pages, LIFO batch:31
[    0.000000]   HighMem zone: 689138 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] e820: [mem 0xe0000000-0xfebfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 19 pages/cpu @f5db1000 s47436 r0 d30388 u77824
[    0.000000] pcpu-alloc: s47436 r0 d30388 u77824 alloc=19*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 915160
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-116-generic root=UUID=0bed8108-6a90-4460-adae-b8554d3f5afa ro splash quiet vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (00037bfe:000dfff0)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 3581640K/3669560K available (8007K kernel code, 781K rwdata, 3172K rodata, 948K init, 800K bss, 87920K reserved, 0K cma-reserved, 2756552K highmem)
[    0.000000] virtual kernel memory layout:
                   fixmap  : 0xfff15000 - 0xfffff000   ( 936 kB)
                   pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
                   vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
                   lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
                     .init : 0xc1bb2000 - 0xc1c9f000   ( 948 kB)
                     .data : 0xc17d2134 - 0xc1bb0780   (3961 kB)
                     .text : 0xc1000000 - 0xc17d2134   (8008 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 32.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
[    0.000000] NR_IRQS:2304 nr_irqs:440 16
[    0.000000] CPU 0 irqstacks, hard=f2c38000 soft=f2c3a000
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 3670016 bytes of page_ext
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3013.821 MHz processor
[    0.004028] Calibrating delay loop (skipped), value calculated using timer frequency.. 6027.64 BogoMIPS (lpj=12055284)
[    0.004037] pid_max: default: 32768 minimum: 301
[    0.004062] ACPI: Core revision 20150930
[    0.010987] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.011032] Security Framework initialized
[    0.011039] Yama: becoming mindful.
[    0.011077] AppArmor: AppArmor initialized
[    0.011167] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.011173] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.011669] Initializing cgroup subsys io
[    0.011680] Initializing cgroup subsys memory
[    0.011696] Initializing cgroup subsys devices
[    0.011705] Initializing cgroup subsys freezer
[    0.011712] Initializing cgroup subsys net_cls
[    0.011718] Initializing cgroup subsys perf_event
[    0.011726] Initializing cgroup subsys net_prio
[    0.011735] Initializing cgroup subsys hugetlb
[    0.011741] Initializing cgroup subsys pids
[    0.011782] CPU: Physical Processor ID: 0
[    0.011786] CPU: Processor Core ID: 0
[    0.011796] FEATURE SPEC_CTRL Not Present
[    0.011802] mce: CPU supports 4 MCE banks
[    0.011820] CPU0: Thermal monitoring enabled (TM1)
[    0.011829] process: using mwait in idle threads
[    0.011844] Last level iTLB entries: 4KB 64, 2MB 64, 4MB 64
[    0.011849] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64, 1GB 0
[    0.011855] Spectre V2 mitigation: Mitigation: Full generic retpoline
[    0.011860] Spectre V2 mitigation: Speculation control IBPB not-supported IBRS not-supported
[    0.012881] Freeing SMP alternatives memory: 28K
[    0.016913] ftrace: allocating 31457 entries in 62 pages
[    0.056190] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.056197] smpboot: Max logical packages: 2
[    0.056204] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.057445] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.100000] smpboot: CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz (family: 0xf, model: 0x3, stepping: 0x3)
[    0.100000] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[    0.100000] ... version:                0
[    0.100000] ... bit width:              40
[    0.100000] ... generic registers:      18
[    0.100000] ... value mask:             000000ffffffffff
[    0.100000] ... max period:             0000007fffffffff
[    0.100000] ... fixed-purpose events:   0
[    0.100000] ... event mask:             000000000003ffff
[    0.100000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.100000] CPU 1 irqstacks, hard=f24c6000 soft=f24d0000
[    0.100000] x86: Booting SMP configuration:
[    0.100000] .... node  #0, CPUs:      #1
[    0.008000] Initializing CPU#1
[    0.111500] x86: Booted up 1 node, 2 CPUs
[    0.111509] smpboot: Total of 2 processors activated (12055.28 BogoMIPS)
[    0.112172] devtmpfs: initialized
[    0.112730] evm: security.selinux
[    0.112733] evm: security.SMACK64
[    0.112736] evm: security.SMACK64EXEC
[    0.112738] evm: security.SMACK64TRANSMUTE
[    0.112740] evm: security.SMACK64MMAP
[    0.112742] evm: security.ima
[    0.112744] evm: security.capability
[    0.112910] PM: Registering ACPI NVS region [mem 0xdfff8000-0xdfffffff] (32768 bytes)
[    0.113074] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.113084] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.113234] pinctrl core: initialized pinctrl subsystem
[    0.113476] RTC time: 19:23:39, date: 02/27/18
[    0.113692] NET: Registered protocol family 16
[    0.114070] EISA bus registered
[    0.120007] cpuidle: using governor ladder
[    0.132010] cpuidle: using governor menu
[    0.132019] PCCT header not found.
[    0.132170] ACPI: bus type PCI registered
[    0.132175] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.135694] PCI: PCI BIOS revision 2.10 entry at 0xfdb11, last bus=1
[    0.135698] PCI: Using configuration type 1 for base access
[    0.148456] ACPI: Added _OSI(Module Device)
[    0.148462] ACPI: Added _OSI(Processor Device)
[    0.148465] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.148468] ACPI: Added _OSI(Processor Aggregator Device)
[    0.154784] ACPI: Interpreter enabled
[    0.154823] ACPI: (supports S0 S1 S3 S4 S5)
[    0.154827] ACPI: Using IOAPIC for interrupt routing
[    0.154877] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.157778] ACPI: Power Resource [URP1] (off)
[    0.159192] ACPI: Power Resource [URP2] (off)
[    0.159278] ACPI: Power Resource [FDDP] (off)
[    0.159361] ACPI: Power Resource [LPTP] (off)
[    0.162710] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.162721] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[    0.162731] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.162739] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.162824] acpi PNP0A03:00: host bridge window expanded to [mem 0xe0000000-0xffdfffff window]; [mem 0xfee01000-0xffdfffff window] ignored
[    0.163100] PCI host bridge to bus 0000:00
[    0.163107] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.163111] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.163115] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.163119] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.163123] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffdfffff window]
[    0.163128] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.163148] pci 0000:00:00.0: [1106:0258] type 00 class 0x060000
[    0.163172] pci 0000:00:00.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
[    0.163353] pci 0000:00:00.1: [1106:1258] type 00 class 0x060000
[    0.163523] pci 0000:00:00.2: [1106:2258] type 00 class 0x060000
[    0.163688] pci 0000:00:00.3: [1106:3258] type 00 class 0x060000
[    0.163851] pci 0000:00:00.4: [1106:4258] type 00 class 0x060000
[    0.164041] pci 0000:00:00.7: [1106:7258] type 00 class 0x060000
[    0.164218] pci 0000:00:01.0: [1106:b198] type 01 class 0x060400
[    0.164280] pci 0000:00:01.0: supports D1
[    0.164411] pci 0000:00:07.0: [10ec:8169] type 00 class 0x020000
[    0.164440] pci 0000:00:07.0: reg 0x10: [io  0xd400-0xd4ff]
[    0.164453] pci 0000:00:07.0: reg 0x14: [mem 0xfebfff00-0xfebfffff]
[    0.164501] pci 0000:00:07.0: reg 0x30: [mem 0xfebc0000-0xfebdffff pref]
[    0.164530] pci 0000:00:07.0: supports D1 D2
[    0.164534] pci 0000:00:07.0: PME# supported from D1 D2 D3hot D3cold
[    0.164687] pci 0000:00:0d.0: [1106:3044] type 00 class 0x0c0010
[    0.164715] pci 0000:00:0d.0: reg 0x10: [mem 0xfebee800-0xfebeefff]
[    0.164728] pci 0000:00:0d.0: reg 0x14: [io  0xd000-0xd07f]
[    0.164802] pci 0000:00:0d.0: supports D2
[    0.164807] pci 0000:00:0d.0: PME# supported from D2 D3hot D3cold
[    0.164949] pci 0000:00:0f.0: [1106:3149] type 00 class 0x010400
[    0.164978] pci 0000:00:0f.0: reg 0x10: [io  0xec00-0xec07]
[    0.164991] pci 0000:00:0f.0: reg 0x14: [io  0xe800-0xe803]
[    0.165004] pci 0000:00:0f.0: reg 0x18: [io  0xe400-0xe407]
[    0.165017] pci 0000:00:0f.0: reg 0x1c: [io  0xe000-0xe003]
[    0.165029] pci 0000:00:0f.0: reg 0x20: [io  0xdc00-0xdc0f]
[    0.165042] pci 0000:00:0f.0: reg 0x24: [io  0xd800-0xd8ff]
[    0.165213] pci 0000:00:0f.1: [1106:0571] type 00 class 0x01018a
[    0.165278] pci 0000:00:0f.1: reg 0x20: [io  0xfc00-0xfc0f]
[    0.165303] pci 0000:00:0f.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.165307] pci 0000:00:0f.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.165310] pci 0000:00:0f.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.165314] pci 0000:00:0f.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.165480] pci 0000:00:10.0: [1106:3038] type 00 class 0x0c0300
[    0.165541] pci 0000:00:10.0: reg 0x20: [io  0xc000-0xc01f]
[    0.165586] pci 0000:00:10.0: supports D1 D2
[    0.165591] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.165656] pci 0000:00:10.0: System wakeup disabled by ACPI
[    0.165754] pci 0000:00:10.1: [1106:3038] type 00 class 0x0c0300
[    0.165814] pci 0000:00:10.1: reg 0x20: [io  0xc400-0xc41f]
[    0.165859] pci 0000:00:10.1: supports D1 D2
[    0.165864] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.165926] pci 0000:00:10.1: System wakeup disabled by ACPI
[    0.166028] pci 0000:00:10.2: [1106:3038] type 00 class 0x0c0300
[    0.166089] pci 0000:00:10.2: reg 0x20: [io  0xc800-0xc81f]
[    0.166134] pci 0000:00:10.2: supports D1 D2
[    0.166139] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.166203] pci 0000:00:10.2: System wakeup disabled by ACPI
[    0.166302] pci 0000:00:10.3: [1106:3038] type 00 class 0x0c0300
[    0.166364] pci 0000:00:10.3: reg 0x20: [io  0xcc00-0xcc1f]
[    0.166408] pci 0000:00:10.3: supports D1 D2
[    0.166413] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.166474] pci 0000:00:10.3: System wakeup disabled by ACPI
[    0.166573] pci 0000:00:10.4: [1106:3104] type 00 class 0x0c0320
[    0.166602] pci 0000:00:10.4: reg 0x10: [mem 0xfebffd00-0xfebffdff]
[    0.166680] pci 0000:00:10.4: supports D1 D2
[    0.166685] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[    0.166747] pci 0000:00:10.4: System wakeup disabled by ACPI
[    0.166849] pci 0000:00:11.0: [1106:3227] type 00 class 0x060100
[    0.166933] HPET not enabled in BIOS. You might try hpet=force boot option
[    0.167098] pci 0000:00:11.5: [1106:3059] type 00 class 0x040100
[    0.167126] pci 0000:00:11.5: reg 0x10: [io  0xbc00-0xbcff]
[    0.167208] pci 0000:00:11.5: supports D1 D2
[    0.167271] pci 0000:00:11.5: System wakeup disabled by ACPI
[    0.167458] pci 0000:01:00.0: [10de:0322] type 00 class 0x030000
[    0.167488] pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
[    0.167501] pci 0000:01:00.0: reg 0x14: [mem 0xe8000000-0xefffffff pref]
[    0.167540] pci 0000:01:00.0: reg 0x30: [mem 0xfeae0000-0xfeafffff pref]
[    0.167682] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.167691] pci 0000:00:01.0:   bridge window [mem 0xfca00000-0xfeafffff]
[    0.167698] pci 0000:00:01.0:   bridge window [mem 0xe7f00000-0xf7efffff pref]
[    0.167709] pci_bus 0000:00: on NUMA node 0
[    0.168738] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.168859] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 *12 14 15)
[    0.168977] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.169095] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.169214] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.169336] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.169458] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.169583] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.170026] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.170026] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.170026] vgaarb: loaded
[    0.170026] vgaarb: bridge control possible 0000:01:00.0
[    0.170026] SCSI subsystem initialized
[    0.170026] libata version 3.00 loaded.
[    0.170026] ACPI: bus type USB registered
[    0.170026] usbcore: registered new interface driver usbfs
[    0.170026] usbcore: registered new interface driver hub
[    0.170026] usbcore: registered new device driver usb
[    0.170026] PCI: Using ACPI for IRQ routing
[    0.170026] PCI: pci_cache_line_size set to 64 bytes
[    0.170026] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.170026] e820: reserve RAM buffer [mem 0xdfff0000-0xdfffffff]
[    0.170026] NetLabel: Initializing
[    0.170026] NetLabel:  domain hash size = 128
[    0.170026] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.170026] NetLabel:  unlabeled traffic allowed by default
[    0.170026] amd_nb: Cannot enumerate AMD northbridges
[    0.170026] clocksource: Switched to clocksource refined-jiffies
[    0.189481] AppArmor: AppArmor Filesystem Enabled
[    0.189643] pnp: PnP ACPI init
[    0.190108] system 00:00: [io  0x0290-0x0297] has been reserved
[    0.190115] system 00:00: [io  0x03f0-0x03f1] has been reserved
[    0.190120] system 00:00: [io  0x04d0-0x04d1] has been reserved
[    0.190125] system 00:00: [io  0x0400-0x040f] has been reserved
[    0.190130] system 00:00: [io  0x0820-0x0821] has been reserved
[    0.190136] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.190146] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.190254] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.190371] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.190501] pnp 00:03: [dma 2]
[    0.190593] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.190997] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.191519] pnp 00:05: [dma 3]
[    0.191666] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.192043] pnp: PnP ACPI: found 6 devices
[    0.192051] PnPBIOS: Disabled by ACPI PNP
[    0.231270] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.231296] clocksource: Switched to clocksource acpi_pm
[    0.231333] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.231344] pci 0000:00:01.0:   bridge window [mem 0xfca00000-0xfeafffff]
[    0.231350] pci 0000:00:01.0:   bridge window [mem 0xe7f00000-0xf7efffff pref]
[    0.231362] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.231366] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.231370] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.231374] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.231378] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xffdfffff window]
[    0.231382] pci_bus 0000:01: resource 1 [mem 0xfca00000-0xfeafffff]
[    0.231386] pci_bus 0000:01: resource 2 [mem 0xe7f00000-0xf7efffff pref]
[    0.231438] NET: Registered protocol family 2
[    0.231756] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.231785] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.231834] TCP: Hash tables configured (established 8192 bind 8192)
[    0.231889] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.231903] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.231986] NET: Registered protocol family 1
[    0.231986] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[    0.231986] pci 0000:00:11.0: Bypassing VIA 8237 APIC De-Assert Message
[    0.231986] pci 0000:01:00.0: Video device with shadowed ROM
[    0.231986] PCI: CLS 32 bytes, default 64
[    0.231986] Unpacking initramfs...
[    1.315233] Freeing initrd memory: 37060K
[    1.315595] Scanning for low memory corruption every 60 seconds
[    1.316413] audit: initializing netlink subsys (disabled)
[    1.316454] audit: type=2000 audit(1519759420.315:1): initialized
[    1.316948] Initialise system trusted keyring
[    1.317195] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.321130] zbud: loaded
[    1.321420] VFS: Disk quotas dquot_6.6.0
[    1.321508] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.322066] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.322675] fuse init (API version 7.23)
[    1.323023] Key type big_key registered
[    1.323057] Allocating IMA MOK and blacklist keyrings.
[    1.323877] Key type asymmetric registered
[    1.323885] Asymmetric key parser 'x509' registered
[    1.323915] bounce: pool size: 64 pages
[    1.324028] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.324102] io scheduler noop registered
[    1.324107] io scheduler deadline registered (default)
[    1.324190] io scheduler cfq registered
[    1.324489] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.324505] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.324587] efifb: probing for efifb
[    1.324593] efifb: cannot reserve video memory at 0xa0000
[    1.324598] efifb: framebuffer at 0xa0000, mapped to 0xc00a0000, using 64k, total 64k
[    1.324602] efifb: mode is 640x480x1, linelength=80, pages=1
[    1.324604] efifb: scrolling: redraw
[    1.324607] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.324805] Console: switching to colour frame buffer device 80x30
[    1.324822] fb0: EFI VGA frame buffer device
[    1.324988] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.324996] ACPI: Power Button [PWRB]
[    1.325114] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    1.325120] ACPI: Sleep Button [SLPB]
[    1.325217] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.325222] ACPI: Power Button [PWRF]
[    1.325560] GHES: HEST is not enabled!
[    1.325628] isapnp: Scanning for PnP cards...
[    1.328088] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.348501] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.352748] Linux agpgart interface v0.103
[    1.352943] agpgart: Detected VIA PT880 chipset
[    1.356585] agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
[    1.363255] loop: module loaded
[    1.363928] libphy: Fixed MDIO Bus: probed
[    1.363935] tun: Universal TUN/TAP device driver, 1.6
[    1.363938] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.364098] PPP generic driver version 2.4.2
[    1.364262] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.364274] ehci-pci: EHCI PCI platform driver
[    1.364609] ehci-pci 0000:00:10.4: EHCI Host Controller
[    1.364625] ehci-pci 0000:00:10.4: new USB bus registered, assigned bus number 1
[    1.364707] ehci-pci 0000:00:10.4: irq 21, io mem 0xfebffd00
[    1.376036] ehci-pci 0000:00:10.4: USB 2.0 started, EHCI 1.00
[    1.376174] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.376181] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.376186] usb usb1: Product: EHCI Host Controller
[    1.376191] usb usb1: Manufacturer: Linux 4.4.0-116-generic ehci_hcd
[    1.376196] usb usb1: SerialNumber: 0000:00:10.4
[    1.376512] hub 1-0:1.0: USB hub found
[    1.376531] hub 1-0:1.0: 8 ports detected
[    1.377069] ehci-platform: EHCI generic platform driver
[    1.377103] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.377113] ohci-pci: OHCI PCI platform driver
[    1.377148] ohci-platform: OHCI generic platform driver
[    1.377174] uhci_hcd: USB Universal Host Controller Interface driver
[    1.377427] uhci_hcd 0000:00:10.0: UHCI Host Controller
[    1.377440] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[    1.377451] uhci_hcd 0000:00:10.0: detected 2 ports
[    1.377476] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000c000
[    1.377577] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.377584] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.377588] usb usb2: Product: UHCI Host Controller
[    1.377593] usb usb2: Manufacturer: Linux 4.4.0-116-generic uhci_hcd
[    1.377598] usb usb2: SerialNumber: 0000:00:10.0
[    1.377884] hub 2-0:1.0: USB hub found
[    1.377901] hub 2-0:1.0: 2 ports detected
[    1.378362] uhci_hcd 0000:00:10.1: UHCI Host Controller
[    1.378376] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[    1.378385] uhci_hcd 0000:00:10.1: detected 2 ports
[    1.378410] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000c400
[    1.378511] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.378517] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.378522] usb usb3: Product: UHCI Host Controller
[    1.378527] usb usb3: Manufacturer: Linux 4.4.0-116-generic uhci_hcd
[    1.378532] usb usb3: SerialNumber: 0000:00:10.1
[    1.378825] hub 3-0:1.0: USB hub found
[    1.378842] hub 3-0:1.0: 2 ports detected
[    1.379298] uhci_hcd 0000:00:10.2: UHCI Host Controller
[    1.379311] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[    1.379321] uhci_hcd 0000:00:10.2: detected 2 ports
[    1.379345] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000c800
[    1.379453] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.379459] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.379464] usb usb4: Product: UHCI Host Controller
[    1.379469] usb usb4: Manufacturer: Linux 4.4.0-116-generic uhci_hcd
[    1.379473] usb usb4: SerialNumber: 0000:00:10.2
[    1.379756] hub 4-0:1.0: USB hub found
[    1.379773] hub 4-0:1.0: 2 ports detected
[    1.380274] uhci_hcd 0000:00:10.3: UHCI Host Controller
[    1.380287] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[    1.380298] uhci_hcd 0000:00:10.3: detected 2 ports
[    1.380322] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000cc00
[    1.380430] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.380436] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.380441] usb usb5: Product: UHCI Host Controller
[    1.380446] usb usb5: Manufacturer: Linux 4.4.0-116-generic uhci_hcd
[    1.380451] usb usb5: SerialNumber: 0000:00:10.3
[    1.380737] hub 5-0:1.0: USB hub found
[    1.380754] hub 5-0:1.0: 2 ports detected
[    1.381149] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    1.381153] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    1.381433] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.381715] mousedev: PS/2 mouse device common for all mice
[    1.382126] rtc_cmos 00:01: RTC can wake from S4
[    1.382381] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    1.382433] rtc_cmos 00:01: alarms up to one year, y3k, 114 bytes nvram
[    1.382455] i2c /dev entries driver
[    1.382614] device-mapper: uevent: version 1.0.3
[    1.382792] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    1.382865] platform eisa.0: Probing EISA bus 0
[    1.382873] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    1.382879] platform eisa.0: Cannot allocate resource for EISA slot 1
[    1.382884] platform eisa.0: Cannot allocate resource for EISA slot 2
[    1.382889] platform eisa.0: Cannot allocate resource for EISA slot 3
[    1.382894] platform eisa.0: Cannot allocate resource for EISA slot 4
[    1.382899] platform eisa.0: Cannot allocate resource for EISA slot 5
[    1.382905] platform eisa.0: Cannot allocate resource for EISA slot 6
[    1.382910] platform eisa.0: Cannot allocate resource for EISA slot 7
[    1.382915] platform eisa.0: Cannot allocate resource for EISA slot 8
[    1.382920] platform eisa.0: EISA: Detected 0 cards
[    1.382953] cpufreq-nforce2: No nForce2 chipset.
[    1.382971] ledtrig-cpu: registered to indicate activity on CPUs
[    1.383679] NET: Registered protocol family 10
[    1.384240] NET: Registered protocol family 17
[    1.384272] Key type dns_resolver registered
[    1.384770] microcode: CPU0 sig=0xf33, pf=0x4, revision=0x7
[    1.384788] microcode: CPU1 sig=0xf33, pf=0x4, revision=0x7
[    1.384876] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.384898] Using IPI No-Shortcut mode
[    1.385271] registered taskstats version 1
[    1.385301] Loading compiled-in X.509 certificates
[    1.391761] Loaded X.509 cert 'Build time autogenerated kernel key: ff54afc682e3d37ddd1801097f0724ac37994f02'
[    1.391805] zswap: loaded using pool lzo/zbud
[    1.396960] Key type trusted registered
[    1.406276] Key type encrypted registered
[    1.406295] AppArmor: AppArmor sha1 policy hashing enabled
[    1.406304] ima: No TPM chip found, activating TPM-bypass!
[    1.406350] evm: HMAC attrs: 0x1
[    1.406843]   Magic number: 6:842:395
[    1.406916] pci 0000:00:07.0: hash matches
[    1.407000] rtc_cmos 00:01: setting system clock to 2018-02-27 19:23:41 UTC (1519759421)
[    1.407218] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.407221] EDD information not available.
[    1.407377] PM: Hibernation image not present or could not be loaded.
[    1.407593] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.679752] isapnp: No Plug & Play device found
[    1.680631] Freeing unused kernel memory: 948K
[    1.680771] Write protecting the kernel text: 8012k
[    1.680840] Write protecting the kernel read-only data: 3176k
[    1.706951] random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    1.707240] random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    1.709193] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    1.746383] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    1.746572] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    1.747177] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    1.747471] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    1.747725] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    1.747962] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    1.748257] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    1.816064] usb 3-2: new low-speed USB device number 2 using uhci_hcd
[    1.877145] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    1.913929] pata_via 0000:00:0f.1: version 0.3.4
[    1.946412] scsi host0: pata_via
[    1.950949] Floppy drive(s): fd0 is 1.44M
[    1.952093] scsi host1: pata_via
[    1.952273] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[    1.952280] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[    1.952571] sata_via 0000:00:0f.0: version 2.6
[    1.952863] sata_via 0000:00:0f.0: routed to hard irq line 11
[    1.969347] scsi host2: sata_via
[    1.973327] FDC 0 is a post-1991 82077
[    1.974567] scsi host3: sata_via
[    1.974764] ata3: SATA max UDMA/133 cmd 0xec00 ctl 0xe800 bmdma 0xdc00 irq 20
[    1.974772] ata4: SATA max UDMA/133 cmd 0xe400 ctl 0xe000 bmdma 0xdc08 irq 20
[    1.974959] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.975270] r8169 0000:00:07.0: PCI: Disallowing DAC for device
[    1.975292] r8169 0000:00:07.0 (unnamed net_device) (uninitialized): not PCI Express
[    1.975862] r8169 0000:00:07.0 eth0: RTL8110s at 0xf8428f00, 00:0c:76:bf:3d:7d, XID 04000000 IRQ 18
[    1.975869] r8169 0000:00:07.0 eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok]
[    1.979894] [drm] Initialized drm 1.1.0 20060810
[    1.993068] usb 3-2: New USB device found, idVendor=046d, idProduct=c03d
[    1.993077] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.993084] usb 3-2: Product: USB-PS/2 Optical Mouse
[    1.993090] usb 3-2: Manufacturer: Logitech
[    2.053733] firewire_ohci 0000:00:0d.0: added OHCI v1.0 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[    2.087484] wmi: Mapper loaded
[    2.144200] r8169 0000:00:07.0 enp0s7: renamed from eth0
[    2.177950] hidraw: raw HID events driver (C) Jiri Kosina
[    2.183913] ata3: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[    2.218114] usbcore: registered new interface driver usbhid
[    2.218124] usbhid: USB HID core driver
[    2.228796] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.0/0003:046D:C03D.0001/input/input4
[    2.230003] hid-generic 0003:046D:C03D.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.1-2/input0
[    2.253156] checking generic (a0000 10000) vs hw (e8000000 8000000)
[    2.253163] fb: switching to nouveaufb from EFI VGA
[    2.253219] Console: switching to colour dummy device 80x25
[    2.253698] nouveau 0000:01:00.0: NVIDIA NV34 (034200a2)
[    2.312046] tsc: Refined TSC clocksource calibration: 3013.556 MHz
[    2.312056] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b704b1d680, max_idle_ns: 440795264640 ns
[    2.342192] nouveau 0000:01:00.0: bios: version 04.34.20.16.00
[    2.343404] agpgart-via 0000:00:00.0: AGP 3.5 bridge
[    2.343424] agpgart: systemd-udevd tried to set rate=x12. Setting to AGP3 x8 mode.
[    2.343438] agpgart-via 0000:00:00.0: putting AGP V3 device into 8x mode
[    2.343516] nouveau 0000:01:00.0: putting AGP V3 device into 8x mode
[    2.343656] agpgart-via 0000:00:00.0: AGP 3.5 bridge
[    2.343674] agpgart: systemd-udevd tried to set rate=x12. Setting to AGP3 x8 mode.
[    2.343687] agpgart-via 0000:00:00.0: putting AGP V3 device into 8x mode
[    2.343764] nouveau 0000:01:00.0: putting AGP V3 device into 8x mode
[    2.343821] nouveau 0000:01:00.0: tmr: unknown input clock freq
[    2.343835] nouveau 0000:01:00.0: fb: 128 MiB DDR1
[    2.351584] [TTM] Zone  kernel: Available graphics memory: 431562 kiB
[    2.351589] [TTM] Zone highmem: Available graphics memory: 1809838 kiB
[    2.351592] [TTM] Initializing pool allocator
[    2.351604] [TTM] Initializing DMA pool allocator
[    2.351629] nouveau 0000:01:00.0: DRM: VRAM: 127 MiB
[    2.351634] nouveau 0000:01:00.0: DRM: GART: 64 MiB
[    2.351640] nouveau 0000:01:00.0: DRM: BMP version 5.38
[    2.351645] nouveau 0000:01:00.0: DRM: DCB version 2.2
[    2.351651] nouveau 0000:01:00.0: DRM: DCB outp 00: 01010300 00009c40
[    2.351656] nouveau 0000:01:00.0: DRM: DCB outp 01: 02020321 00000033
[    2.351751] nouveau 0000:01:00.0: DRM: Loading NV17 power sequencing microcode
[    2.353568] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.353574] [drm] Driver supports precise vblank timestamp query.
[    2.357489] nouveau 0000:01:00.0: DRM: MM: using M2MF for buffer copies
[    2.357509] nouveau 0000:01:00.0: DRM: Setting dpms mode 3 on TV encoder (output 1)
[    2.392378] ata2.00: ATAPI: LITE-ON CD-RW SOHR-5238S, 4S04, max UDMA/33
[    2.392387] ata2.01: ATAPI: LITE-ON DVD SOHD-167T, 9S13, max UDMA/33
[    2.408261] ata2.00: configured for UDMA/33
[    2.408715] ata2.01: configured for UDMA/33
[    2.410334] scsi 1:0:0:0: CD-ROM            LITE-ON  CD-RW SOHR-5238S 4S04 PQ: 0 ANSI: 5
[    2.412426] nouveau 0000:01:00.0: DRM: allocated 1024x768 fb: 0x9000, bo f5831400
[    2.412622] fbcon: nouveaufb (fb0) is primary device
[    2.412787] Console: switching to colour frame buffer device 128x48
[    2.412839] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[    2.424901] sr 1:0:0:0: [sr0] scsi3-mmc drive: 174x/52x writer cd/rw xa/form2 cdda tray
[    2.424907] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.425288] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.425584] sr 1:0:0:0: Attached scsi generic sg0 type 5
[    2.426424] scsi 1:0:1:0: CD-ROM            LITE-ON  DVD SOHD-167T    9S13 PQ: 0 ANSI: 5
[    2.432073] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[    2.440602] sr 1:0:1:0: [sr1] scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[    2.440984] sr 1:0:1:0: Attached scsi CD-ROM sr1
[    2.441236] sr 1:0:1:0: Attached scsi generic sg1 type 5
[    2.552212] firewire_core 0000:00:0d.0: created device fw0: GUID 00dc1000df045c00, S400
[    2.644037] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.808386] ata4.00: ATA-7: Maxtor 6Y080M0, YAR51HW0, max UDMA/133
[    2.808392] ata4.00: 160086528 sectors, multi 16: LBA 
[    2.824375] ata4.00: configured for UDMA/133
[    2.824650] scsi 3:0:0:0: Direct-Access     ATA      Maxtor 6Y080M0   1HW0 PQ: 0 ANSI: 5
[    2.825336] sd 3:0:0:0: [sda] 160086528 512-byte logical blocks: (82.0 GB/76.3 GiB)
[    2.825486] sd 3:0:0:0: [sda] Write Protect is off
[    2.825496] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.825508] sd 3:0:0:0: Attached scsi generic sg2 type 0
[    2.825572] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.866187]  sda: sda1 sda2 < sda5 >
[    2.867058] sd 3:0:0:0: [sda] Attached SCSI disk
[    3.312171] clocksource: Switched to clocksource tsc
[    3.673182] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    4.446510] random: nonblocking pool is initialized
[    5.129907] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    5.130176] systemd[1]: Detected architecture x86.
[    5.152068] systemd[1]: Set hostname to <greg-desktop>.
[    6.825938] systemd[1]: Started Trigger resolvconf update for networkd DNS.
[    6.826134] systemd[1]: Listening on fsck to fsckd communication Socket.
[    6.826228] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    6.826329] systemd[1]: Listening on Journal Socket (/dev/log).
[    6.826385] systemd[1]: Listening on Syslog Socket.
[    6.826469] systemd[1]: Listening on udev Control Socket.
[    6.826776] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    6.826886] systemd[1]: Listening on Journal Socket.
[    6.826960] systemd[1]: Listening on udev Kernel Socket.
[    6.827118] systemd[1]: Listening on Journal Audit Socket.
[    6.827208] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    6.827235] systemd[1]: Reached target User and Group Name Lookups.
[    6.827465] systemd[1]: Created slice System Slice.
[    6.840453] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    6.842155] systemd[1]: Started Braille Device Support.
[    6.844369] systemd[1]: Starting Nameserver information manager...
[    6.968490] systemd[1]: Starting Journal Service...
[    6.970328] systemd[1]: Mounting Debug File System...
[    6.972219] systemd[1]: Started Read required files in advance.
[    7.140442] systemd[1]: Starting Load Kernel Modules...
[    7.140749] systemd[1]: Created slice User and Session Slice.
[    7.140815] systemd[1]: Reached target Slices.
[    7.140882] systemd[1]: Reached target Remote File Systems (Pre).
[    7.140954] systemd[1]: Reached target Remote File Systems.
[    7.142785] systemd[1]: Starting Set console keymap...
[    7.145533] systemd[1]: Mounting Huge Pages File System...
[    7.148547] systemd[1]: Starting Uncomplicated firewall...
[    7.148633] systemd[1]: Reached target Encrypted Volumes.
[    7.150510] systemd[1]: Mounting POSIX Message Queue File System...
[    7.198255] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    7.260504] systemd[1]: Starting Create Static Device Nodes in /dev...
[    7.558048] systemd[1]: Started Uncomplicated firewall.
[    8.029829] systemd[1]: Mounted POSIX Message Queue File System.
[    8.029943] systemd[1]: Mounted Debug File System.
[    8.030009] systemd[1]: Mounted Huge Pages File System.
[    8.235274] lp: driver loaded but no devices found
[    8.240490] systemd[1]: Started Nameserver information manager.
[    8.260902] systemd[1]: Reached target Network (Pre).
[    8.334348] ppdev: user-space parallel port driver
[    8.406131] systemd[1]: Started Journal Service.
[    8.440424] parport_pc 00:05: reported by Plug and Play ACPI
[    8.440533] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[    8.536255] lp0: using parport0 (interrupt-driven).
[   12.726814] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   13.172907] systemd-journald[205]: Received request to flush runtime journal from PID 1
[   15.076185] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   15.448723] ACPI Warning: SystemIO range 0x0000000000000400-0x0000000000000407 conflicts with OpRegion 0x0000000000000400-0x0000000000000406 (\SMOV) (20150930/utaddress-254)
[   15.448742] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   15.968883] MPU-401 device not found or device busy
[   20.812146] audit: type=1400 audit(1519759440.901:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=531 comm="apparmor_parser"
[   20.812173] audit: type=1400 audit(1519759440.901:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=531 comm="apparmor_parser"
[   20.812191] audit: type=1400 audit(1519759440.901:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=531 comm="apparmor_parser"
[   20.812208] audit: type=1400 audit(1519759440.901:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=531 comm="apparmor_parser"
[   21.161694] audit: type=1400 audit(1519759441.253:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=530 comm="apparmor_parser"
[   21.161723] audit: type=1400 audit(1519759441.253:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=530 comm="apparmor_parser"
[   21.770508] audit: type=1400 audit(1519759441.857:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=602 comm="apparmor_parser"
[   21.770539] audit: type=1400 audit(1519759441.857:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=602 comm="apparmor_parser"
[   21.770558] audit: type=1400 audit(1519759441.857:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//snap_update_ns" pid=602 comm="apparmor_parser"
[   22.039089] audit: type=1400 audit(1519759442.125:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/unreal-*/System/*.bin" pid=603 comm="apparmor_parser"
[   22.346218] Adding 2096124k swap on /dev/sda5.  Priority:-1 extents:1 across:2096124k FS
[   36.904222] IPv6: ADDRCONF(NETDEV_UP): enp0s7: link is not ready
[   36.916720] r8169 0000:00:07.0 enp0s7: link down
[   36.916729] r8169 0000:00:07.0 enp0s7: link down
[   36.916804] IPv6: ADDRCONF(NETDEV_UP): enp0s7: link is not ready
[   56.328592] r8169 0000:00:07.0 enp0s7: link up
[   56.328616] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s7: link becomes ready

Voici encore les retours demandés:

~$ cat /boot/grub/grub.cfg | wc -l
312

~$ cat /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sdb1 during installation
UUID=0bed8108-6a90-4460-adae-b8554d3f5afa /               ext4    errors=remount-ro 0       1
# swap was on /dev/sdb5 during installation
UUID=0a24113d-d683-4487-8068-6e26bdc43aae none            swap    sw              0       0
/dev/fd0        /media/floppy0  auto    rw,user,noauto,exec,utf8 0       0

Bonne lecture et merci de ton soutien

À propos, comment apprend-on à déchiffrer un dmesg?
J'ai cherché sur la toile, mais rien trouvé de concret.
Y a-t-il un bouquin à lire? Faut il comprendre le c?

Dernière modification par hibou7 (Le 27/02/2018, à 21:46)

moko138 · Le 27/02/2018, à 23:16

Ton fstab
OK, il n'y a pas d'autres partitions à activer, que la / et la swap.
Mais :

/dev/fd0        /media/floppy0  auto    rw,user,noauto,exec,utf8 0       0

Ton pc de 2001 a-t-il un lecteur de disquettes fonctionnel ?
Si oui, laisse cette ligne ;
Si non, supprime cette ligne avec les droits admin, et enregistre le fichier.

- -

cat /boot/grub/grub.cfg | wc -l
312

C'est à peu près ce que j'ai avec quatre S.E. dans mon pc. Mais si tu n'as qu'un S.E.,
tu gagneras du temps entre la mise sous tension et le début du chargement du noyau (donc avant le début de dmesg), en exécutant

sudo apt-get autoremove

- -

Lire un dmesg
Ça vient sur le tas, et en lisant des commentaires sur d'autres fils. Rien à voir avec le "C" (auquel je ne connais rien).
Le nombre entre crochets, c'est en secondes, le temps écoulé depuis le chargement du noyau (tiramiseb dixit). Donc

[   12.726814] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro

te dit que 12,7" après le chargement du noyau, ta racine en sda1 (qui avait d'abord été montée en lecture seule, c'est normal) a bien été remontée en lecture-écriture. Et que l'option (de sécurité) en cas d'erreur, est d'essayer de la monter malgré tout en lecture seule.

D'une façon générale, les lignes sont construites comme ceci

[  Date en secondes]     De quoi la ligne parle.    Ce que le système en dit (OK ou description du problème.

Donc repérer les trous, (comme en #2) est une des voies d'exploration :
ça indique où le système met du temps à atteindre l'étape suivante.

Et dans ton dernier dmesg, on voit que la quasi totalité des lignes de 16 à 56 secondes sont relatives au réseau. (dhcp, ipv6 (qui ne m'a pas l'air désactivé ! (*)), r8169 (qui est le module pour ta carte filaire), NetworkManager, connman,...)

(*)

Montre cat /etc/sysctl.conf | tail -25

Ça fait pas loin de 40 secondes pour le réseau !
Une fois lancée, la connexion filaire est-elle bonne et stable ?
Une fois lancée, la connexion wifi est-elle bonne et stable ?
Si la réponse à une de ces deux questions est non, je crois que tu auras intérêt à ouvrir un fil dans la section "réseau", en y donnant le log de wificheck.

hibou7 · Le 01/03/2018, à 21:54

Salut moko138

merci de tes éclaircissements.
Oui, j'ai un lecteur de disquette sur ma machine.
Je ne l'ai jamais utilisé et ne sait donc pas au juste si il fonctionne.

---

4 S.E = 4 systemes d'exploitations, j'ai dû regarder dans Wikipedia pour comprendre.
Vive les abréviations françaises, le V.T.T, le H.L.M et l'assedic

Oui, je fais régulièrement

sudo apt-get autoremove

Pour garder le système propre.

---

Merci pour tes explications sur dmesg.
Je continue à lire attentivement des discussions qui ont à voir avec ce fichier.

---

Donc, tu confirmes que ce boot lent est causé par le réseau.
Au #3 j'avais fait préalablement
Réseau > Modifier les connexions réseau > Wired connection 1 > Modifier
Et j'avais mis ipv6 sur "Ignorer", croyant naïvement que ça allait suffire à désactiver ipv6.

C'est pour cela que la commande

ip a | grep inet6

ne donnait aucun retour.

Actuellement le retour est

gregexp@greg-desktop:~$ ip a | grep inet6
    inet6 fd00::b4f8:f327:ca35:ace3/64 scope global temporary dynamic 
    inet6 fd00::20c:76ff:febf:3d7d/64 scope global mngtmpaddr noprefixroute dynamic 
    inet6 fe80::20c:76ff:febf:3d7d/64 scope link

Et voici le retour que tu demandes:

gregexp@greg-desktop:~$ cat /etc/sysctl.conf | tail -25
# redirection. Some network environments, however, require that these
# settings are disabled so review and enable them as needed.
#
# Do not accept ICMP redirects (prevent MITM attacks)
#net.ipv4.conf.all.accept_redirects = 0
#net.ipv6.conf.all.accept_redirects = 0
# _or_
# Accept ICMP redirects only for gateways listed in our default
# gateway list (enabled by default)
# net.ipv4.conf.all.secure_redirects = 1
#
# Do not send ICMP redirects (we are not a router)
#net.ipv4.conf.all.send_redirects = 0
#
# Do not accept IP source route packets (we are not a router)
#net.ipv4.conf.all.accept_source_route = 0
#net.ipv6.conf.all.accept_source_route = 0
#
# Log Martian Packets
#net.ipv4.conf.all.log_martians = 1
#
net.ipv6.conf.all.disable_ipv6 = 1
net.ipv6.conf.default.disable_ipv6 = 1
net.ipv6.conf.lo.disable_ipv6 = 1

L'énigme demeure. Devrais-je tester encore une fois les deux autres méthodes?

[EDIT]
Pour désactiver ipv6 j''ai tenté - en déséspoir de cause - de cumuler les modifications de fichiers. Des 3 possibilités évoquées au #1, j'ai testé 1+2 et 1+2+3. Malheureusement ipv6 reste activé et le temps de boot reste à peu près le même.

---

J'ai un modem Wi-Fi, mais ce vieux PC n'offre pas la possibilité de l'exploiter.
De toutes façons, je préfère la connexion filaire, qui donne pleine satisfacion oui, donc bonne et stable.

Dernière modification par hibou7 (Le 01/03/2018, à 22:20)

moko138 · Le 02/03/2018, à 12:33

. Pour désactiver l'ipv6,
La méthode 2 est périmée - la page elle-même te le signale, en haut.
La méthode 3 est un message hors-Doc, qui date d'il y a 11 ans...
- -

La méthode 1, celle de la Doc, fonctionne.
Et si la fin de ton /etc/sysctl.conf n'a pas changé, elle est correcte.

Mais en plus,
1) j'ai constaté chez moi qui n'ai de connexion que wifi, qu'il faut dire à network-manager d'ignorer l'ipv6.
Ça se passe en cliquant sur l'icône de N-M (clic droit ou gauche, ça dépend des variantes) :
> Modification des connexions
> "Sans fil". Dans la liste, choisir la connexion en cours
> onglet ipv6 --> "ignorer"
> onglet ipv4 --> cocher "Requiert un adressage ipv4".

2) Et puisque, ordinairement tu n'utilises pas la wifi, tu as intérêt, dans la même boîte de dialogue, à dé-cocher "Connecter automatiquement".

3) On peut jouer aussi - c'est ce que je fais chez moi - sur le début du hosts. Montre

cat /etc/hosts | head -10 | tail -8

hibou7 · Le 03/03/2018, à 02:29

Merci pour ta patience

J'ai donc annulé les modifications de fichiers 2 et 3 qui sont obsolètes.

1) Ensuite, mon Network Manager ne donne dans la liste que la "wired connection 1".
Je l'ai modifiée comme suit:
> Onglet "Général": décoché "se connecter automatiquement à ce réseau si disponible.
>Onglet "Paramètres IPv4" coché "requiert un adressage IPv4 pour que cette connexion fonctionne".
> Onglet "Paramètres IPv6", Méthode: "ignorer".

Après reboot je n'avais plus d'internet du tout.
C'était dû à la modification dans l'onglet "Général". En recochant "se connecter à ce réseau automatiquement si disponible" la connexion est revenue.

Mon dmesg a toujours la même allure. Le temps de boot est actuellement 57 sec.

Voici encore le reour que tu demandes:

gregexp@greg-desktop:~$ cat /etc/hosts | head -10 | tail -8
127.0.0.1	localhost
127.0.1.1	greg-desktop.fritz.box	greg-desktop

# The following lines are desirable for IPv6 capable hosts
::1     localhost ip6-localhost ip6-loopback
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters

moko138 · Le 03/03/2018, à 08:11

Bonjour,
Bizarre, le retour de

cat /etc/hosts | head -10 | tail -8

semble indiquer que ton hosts ne fait que 7 lignes.

Si tu es certain de la commande (en cas de doute, relance-la) et de son retour,
alors pour commenter les lignes ipv6 (ce qui fonctionne chez mo), nous pouvons procéder ainsi :

1) Avant tout, faire la copie de sécurité :

sudo cp -av /etc/hosts  /etc/hosts.20180302

(la date d'hier est volontaire, pour éviter toute ambiguïté).

2) Ensuite écraser le hosts actuel par le hosts modifié :

echo -e '127.0.0.1\tlocalhost\n127.0.1.1\tgreg-desktop.fritz.box\tgreg-desktop\n\n# Dernière modification : 2018/03/03\n# Copie du hosts précédent en : /etc/hosts.20180302\n# The following lines are desirable for IPv6 capable hosts\n#::1     localhost ip6-localhost ip6-loopback\n#ff02::1 ip6-allnodes\n#ff02::2 ip6-allrouters\n#\n' | sudo tee /etc/hosts ; echo "Nouveau hosts :"; cat /etc/hosts

ce qui donnera ce nouveau hosts :

127.0.0.1	localhost
127.0.1.1	greg-desktop.fritz.box	greg-desktop

# Dernière modification : 2018/03/03
# Copie du hosts précédent en : /etc/hosts.20180302
# The following lines are desirable for IPv6 capable hosts
#::1     localhost ip6-localhost ip6-loopback
#ff02::1 ip6-allnodes
#ff02::2 ip6-allrouters
#

.
3) Regardons les applications et services dont le lancement au démarrage est demandé :

ls -la /etc/xdg/autostart
ls -la ~/.config/autostart

.
4) Au prochain démarrage, tu redonneras le dmesg

P.S. : Tu devrais corriger ta signature dont le début est périmé et ambigu :
a) Du fait des mises à jour, tu as, une 16.04.3 (bientôt .4) comme

lsb_release -d

te le confirmera.
b) Tu devrais préciser "à noyau 4.4" pour éviter l'ambiguïté
avec les 16.04 hwe qui en sont au noyau 4.13

hibou7 · Le 04/03/2018, à 00:15

Salut et merci de ton suivi.

1) J'ai fait la copie, elle est bien dans mon /etc
2) Appliqué ta commande.
J'aurais aussi pu commenter les dernières lignes de /etc/hosts avec sudo nano non?
Dans tous les cas, voici le nouveau /etc/hosts:

gregexp@greg-desktop:~$ cat /etc/hosts
127.0.0.1	localhost
127.0.1.1	greg-desktop.fritz.box	greg-desktop

# Dernière modification : 2018/03/03
# Copie du hosts précédent en : /etc/hosts.20180302
# The following lines are desirable for IPv6 capable hosts
#::1     localhost ip6-localhost ip6-loopback
#ff02::1 ip6-allnodes
#ff02::2 ip6-allrouters
#

3) Dans les applications et services au démarrage, je ne vois pas d'IPv6. Par contre
4) voici le dmesg après reboot:

gregexp@greg-desktop:~$ dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.0-116-generic (buildd@lgw01-amd64-023) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.9) ) #140-Ubuntu SMP Mon Feb 12 21:22:43 UTC 2018 (Ubuntu 4.4.0-116.140-generic 4.4.98)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dffeffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dfff0000-0x00000000dfff7fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000dfff8000-0x00000000dfffffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fff80000-0x00000000ffffffff] reserved
[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[    0.000000] Legacy DMI 2.3 present.
[    0.000000] DMI: MSI MS-7008/MS-7008, BIOS Version 07.00T 04/02/01
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0xdfff0 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0C0000000 mask FE0000000 write-back
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- UC  
[    0.000000] found SMP MP-table at [mem 0x000fb950-0x000fb95f] mapped at [c00fb950]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] initial memory mapped: [mem 0x00000000-0x021fffff]
[    0.000000] Base memory trampoline at [c0099000] 99000 size 16384
[    0.000000] BRK [0x01d80000, 0x01d80fff] PGTABLE
[    0.000000] BRK [0x01d81000, 0x01d81fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x3378e000-0x35bbefff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F9FB0 000014 (v00 AMI   )
[    0.000000] ACPI: RSDT 0x00000000DFFF0000 00002C (v01 AMIINT VIA_P6   00000010 MSFT 00000097)
[    0.000000] ACPI: FACP 0x00000000DFFF0030 000081 (v01 AMIINT VIA_P6   00000011 MSFT 00000097)
[    0.000000] ACPI: DSDT 0x00000000DFFF0120 0034FC (v01 VIA    APOLLO-P 00001000 MSFT 0100000D)
[    0.000000] ACPI: FACS 0x00000000DFFF8000 000040
[    0.000000] ACPI: APIC 0x00000000DFFF00C0 00005C (v01 AMIINT VIA_P6   00000009 MSFT 00000097)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 2691MB HIGHMEM available.
[    0.000000] 891MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 37bfe000
[    0.000000]   low ram: 0 - 37bfe000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x0000000037bfdfff]
[    0.000000]   HighMem  [mem 0x0000000037bfe000-0x00000000dffeffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000dffeffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000000dffeffff]
[    0.000000] On node 0 totalpages: 917390
[    0.000000]   DMA zone: 40 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 2190 pages used for memmap
[    0.000000]   Normal zone: 224254 pages, LIFO batch:31
[    0.000000]   HighMem zone: 689138 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] e820: [mem 0xe0000000-0xfebfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 19 pages/cpu @f5db1000 s47436 r0 d30388 u77824
[    0.000000] pcpu-alloc: s47436 r0 d30388 u77824 alloc=19*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 915160
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-116-generic root=UUID=0bed8108-6a90-4460-adae-b8554d3f5afa ro splash quiet vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (00037bfe:000dfff0)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 3581640K/3669560K available (8007K kernel code, 781K rwdata, 3172K rodata, 948K init, 800K bss, 87920K reserved, 0K cma-reserved, 2756552K highmem)
[    0.000000] virtual kernel memory layout:
                   fixmap  : 0xfff15000 - 0xfffff000   ( 936 kB)
                   pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
                   vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
                   lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
                     .init : 0xc1bb2000 - 0xc1c9f000   ( 948 kB)
                     .data : 0xc17d2134 - 0xc1bb0780   (3961 kB)
                     .text : 0xc1000000 - 0xc17d2134   (8008 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 32.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
[    0.000000] NR_IRQS:2304 nr_irqs:440 16
[    0.000000] CPU 0 irqstacks, hard=f2c38000 soft=f2c3a000
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 3670016 bytes of page_ext
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3013.448 MHz processor
[    0.004028] Calibrating delay loop (skipped), value calculated using timer frequency.. 6026.89 BogoMIPS (lpj=12053792)
[    0.004037] pid_max: default: 32768 minimum: 301
[    0.004062] ACPI: Core revision 20150930
[    0.011006] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.011052] Security Framework initialized
[    0.011058] Yama: becoming mindful.
[    0.011097] AppArmor: AppArmor initialized
[    0.011186] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.011193] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.011688] Initializing cgroup subsys io
[    0.011699] Initializing cgroup subsys memory
[    0.011715] Initializing cgroup subsys devices
[    0.011724] Initializing cgroup subsys freezer
[    0.011731] Initializing cgroup subsys net_cls
[    0.011737] Initializing cgroup subsys perf_event
[    0.011744] Initializing cgroup subsys net_prio
[    0.011754] Initializing cgroup subsys hugetlb
[    0.011760] Initializing cgroup subsys pids
[    0.011801] CPU: Physical Processor ID: 0
[    0.011805] CPU: Processor Core ID: 0
[    0.011815] FEATURE SPEC_CTRL Not Present
[    0.011821] mce: CPU supports 4 MCE banks
[    0.011839] CPU0: Thermal monitoring enabled (TM1)
[    0.011848] process: using mwait in idle threads
[    0.011862] Last level iTLB entries: 4KB 64, 2MB 64, 4MB 64
[    0.011867] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64, 1GB 0
[    0.011874] Spectre V2 mitigation: Mitigation: Full generic retpoline
[    0.011878] Spectre V2 mitigation: Speculation control IBPB not-supported IBRS not-supported
[    0.012901] Freeing SMP alternatives memory: 28K
[    0.016931] ftrace: allocating 31457 entries in 62 pages
[    0.056190] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.056197] smpboot: Max logical packages: 2
[    0.056205] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.057445] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.100000] smpboot: CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz (family: 0xf, model: 0x3, stepping: 0x3)
[    0.100000] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[    0.100000] ... version:                0
[    0.100000] ... bit width:              40
[    0.100000] ... generic registers:      18
[    0.100000] ... value mask:             000000ffffffffff
[    0.100000] ... max period:             0000007fffffffff
[    0.100000] ... fixed-purpose events:   0
[    0.100000] ... event mask:             000000000003ffff
[    0.100000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.100000] CPU 1 irqstacks, hard=f24c6000 soft=f24d0000
[    0.100000] x86: Booting SMP configuration:
[    0.100000] .... node  #0, CPUs:      #1
[    0.008000] Initializing CPU#1
[    0.111502] x86: Booted up 1 node, 2 CPUs
[    0.111512] smpboot: Total of 2 processors activated (12053.79 BogoMIPS)
[    0.112172] devtmpfs: initialized
[    0.112728] evm: security.selinux
[    0.112731] evm: security.SMACK64
[    0.112733] evm: security.SMACK64EXEC
[    0.112735] evm: security.SMACK64TRANSMUTE
[    0.112737] evm: security.SMACK64MMAP
[    0.112740] evm: security.ima
[    0.112742] evm: security.capability
[    0.112907] PM: Registering ACPI NVS region [mem 0xdfff8000-0xdfffffff] (32768 bytes)
[    0.113071] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.113082] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.113233] pinctrl core: initialized pinctrl subsystem
[    0.113474] RTC time: 22:01:16, date: 03/03/18
[    0.113692] NET: Registered protocol family 16
[    0.114068] EISA bus registered
[    0.120007] cpuidle: using governor ladder
[    0.132011] cpuidle: using governor menu
[    0.132019] PCCT header not found.
[    0.132170] ACPI: bus type PCI registered
[    0.132175] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.135694] PCI: PCI BIOS revision 2.10 entry at 0xfdb11, last bus=1
[    0.135698] PCI: Using configuration type 1 for base access
[    0.148284] ACPI: Added _OSI(Module Device)
[    0.148289] ACPI: Added _OSI(Processor Device)
[    0.148292] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.148296] ACPI: Added _OSI(Processor Aggregator Device)
[    0.154795] ACPI: Interpreter enabled
[    0.154834] ACPI: (supports S0 S1 S3 S4 S5)
[    0.154838] ACPI: Using IOAPIC for interrupt routing
[    0.154888] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.157792] ACPI: Power Resource [URP1] (off)
[    0.159203] ACPI: Power Resource [URP2] (off)
[    0.159289] ACPI: Power Resource [FDDP] (off)
[    0.159373] ACPI: Power Resource [LPTP] (off)
[    0.162720] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.162731] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[    0.162742] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.162750] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.162835] acpi PNP0A03:00: host bridge window expanded to [mem 0xe0000000-0xffdfffff window]; [mem 0xfee01000-0xffdfffff window] ignored
[    0.163110] PCI host bridge to bus 0000:00
[    0.163117] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.163121] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.163125] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.163129] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.163133] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffdfffff window]
[    0.163138] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.163158] pci 0000:00:00.0: [1106:0258] type 00 class 0x060000
[    0.163181] pci 0000:00:00.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
[    0.163362] pci 0000:00:00.1: [1106:1258] type 00 class 0x060000
[    0.163533] pci 0000:00:00.2: [1106:2258] type 00 class 0x060000
[    0.163698] pci 0000:00:00.3: [1106:3258] type 00 class 0x060000
[    0.163861] pci 0000:00:00.4: [1106:4258] type 00 class 0x060000
[    0.164051] pci 0000:00:00.7: [1106:7258] type 00 class 0x060000
[    0.164227] pci 0000:00:01.0: [1106:b198] type 01 class 0x060400
[    0.164289] pci 0000:00:01.0: supports D1
[    0.164420] pci 0000:00:07.0: [10ec:8169] type 00 class 0x020000
[    0.164449] pci 0000:00:07.0: reg 0x10: [io  0xd400-0xd4ff]
[    0.164462] pci 0000:00:07.0: reg 0x14: [mem 0xfebfff00-0xfebfffff]
[    0.164509] pci 0000:00:07.0: reg 0x30: [mem 0xfebc0000-0xfebdffff pref]
[    0.164538] pci 0000:00:07.0: supports D1 D2
[    0.164543] pci 0000:00:07.0: PME# supported from D1 D2 D3hot D3cold
[    0.164696] pci 0000:00:0d.0: [1106:3044] type 00 class 0x0c0010
[    0.164725] pci 0000:00:0d.0: reg 0x10: [mem 0xfebee800-0xfebeefff]
[    0.164738] pci 0000:00:0d.0: reg 0x14: [io  0xd000-0xd07f]
[    0.164811] pci 0000:00:0d.0: supports D2
[    0.164815] pci 0000:00:0d.0: PME# supported from D2 D3hot D3cold
[    0.164959] pci 0000:00:0f.0: [1106:3149] type 00 class 0x010400
[    0.164988] pci 0000:00:0f.0: reg 0x10: [io  0xec00-0xec07]
[    0.165001] pci 0000:00:0f.0: reg 0x14: [io  0xe800-0xe803]
[    0.165013] pci 0000:00:0f.0: reg 0x18: [io  0xe400-0xe407]
[    0.165026] pci 0000:00:0f.0: reg 0x1c: [io  0xe000-0xe003]
[    0.165039] pci 0000:00:0f.0: reg 0x20: [io  0xdc00-0xdc0f]
[    0.165052] pci 0000:00:0f.0: reg 0x24: [io  0xd800-0xd8ff]
[    0.165222] pci 0000:00:0f.1: [1106:0571] type 00 class 0x01018a
[    0.165287] pci 0000:00:0f.1: reg 0x20: [io  0xfc00-0xfc0f]
[    0.165312] pci 0000:00:0f.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.165316] pci 0000:00:0f.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.165319] pci 0000:00:0f.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.165323] pci 0000:00:0f.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.165489] pci 0000:00:10.0: [1106:3038] type 00 class 0x0c0300
[    0.165550] pci 0000:00:10.0: reg 0x20: [io  0xc000-0xc01f]
[    0.165595] pci 0000:00:10.0: supports D1 D2
[    0.165599] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.165665] pci 0000:00:10.0: System wakeup disabled by ACPI
[    0.165762] pci 0000:00:10.1: [1106:3038] type 00 class 0x0c0300
[    0.165823] pci 0000:00:10.1: reg 0x20: [io  0xc400-0xc41f]
[    0.165868] pci 0000:00:10.1: supports D1 D2
[    0.165873] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.165935] pci 0000:00:10.1: System wakeup disabled by ACPI
[    0.166037] pci 0000:00:10.2: [1106:3038] type 00 class 0x0c0300
[    0.166097] pci 0000:00:10.2: reg 0x20: [io  0xc800-0xc81f]
[    0.166143] pci 0000:00:10.2: supports D1 D2
[    0.166148] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.166212] pci 0000:00:10.2: System wakeup disabled by ACPI
[    0.166311] pci 0000:00:10.3: [1106:3038] type 00 class 0x0c0300
[    0.166373] pci 0000:00:10.3: reg 0x20: [io  0xcc00-0xcc1f]
[    0.166418] pci 0000:00:10.3: supports D1 D2
[    0.166422] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.166484] pci 0000:00:10.3: System wakeup disabled by ACPI
[    0.166583] pci 0000:00:10.4: [1106:3104] type 00 class 0x0c0320
[    0.166611] pci 0000:00:10.4: reg 0x10: [mem 0xfebffd00-0xfebffdff]
[    0.166690] pci 0000:00:10.4: supports D1 D2
[    0.166694] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[    0.166756] pci 0000:00:10.4: System wakeup disabled by ACPI
[    0.166858] pci 0000:00:11.0: [1106:3227] type 00 class 0x060100
[    0.166942] HPET not enabled in BIOS. You might try hpet=force boot option
[    0.167107] pci 0000:00:11.5: [1106:3059] type 00 class 0x040100
[    0.167135] pci 0000:00:11.5: reg 0x10: [io  0xbc00-0xbcff]
[    0.167217] pci 0000:00:11.5: supports D1 D2
[    0.167281] pci 0000:00:11.5: System wakeup disabled by ACPI
[    0.167469] pci 0000:01:00.0: [10de:0322] type 00 class 0x030000
[    0.167497] pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
[    0.167509] pci 0000:01:00.0: reg 0x14: [mem 0xe8000000-0xefffffff pref]
[    0.167548] pci 0000:01:00.0: reg 0x30: [mem 0xfeae0000-0xfeafffff pref]
[    0.167691] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.167700] pci 0000:00:01.0:   bridge window [mem 0xfca00000-0xfeafffff]
[    0.167706] pci 0000:00:01.0:   bridge window [mem 0xe7f00000-0xf7efffff pref]
[    0.167718] pci_bus 0000:00: on NUMA node 0
[    0.168747] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.168868] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 *12 14 15)
[    0.168986] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.169104] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.169224] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.169347] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.169470] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.169595] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.170039] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.170039] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.170039] vgaarb: loaded
[    0.170039] vgaarb: bridge control possible 0000:01:00.0
[    0.170039] SCSI subsystem initialized
[    0.170039] libata version 3.00 loaded.
[    0.170039] ACPI: bus type USB registered
[    0.170039] usbcore: registered new interface driver usbfs
[    0.170039] usbcore: registered new interface driver hub
[    0.170039] usbcore: registered new device driver usb
[    0.170039] PCI: Using ACPI for IRQ routing
[    0.170039] PCI: pci_cache_line_size set to 64 bytes
[    0.170039] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.170039] e820: reserve RAM buffer [mem 0xdfff0000-0xdfffffff]
[    0.170039] NetLabel: Initializing
[    0.170039] NetLabel:  domain hash size = 128
[    0.170039] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.170039] NetLabel:  unlabeled traffic allowed by default
[    0.170039] amd_nb: Cannot enumerate AMD northbridges
[    0.170039] clocksource: Switched to clocksource refined-jiffies
[    0.189465] AppArmor: AppArmor Filesystem Enabled
[    0.189626] pnp: PnP ACPI init
[    0.190101] system 00:00: [io  0x0290-0x0297] has been reserved
[    0.190109] system 00:00: [io  0x03f0-0x03f1] has been reserved
[    0.190114] system 00:00: [io  0x04d0-0x04d1] has been reserved
[    0.190119] system 00:00: [io  0x0400-0x040f] has been reserved
[    0.190124] system 00:00: [io  0x0820-0x0821] has been reserved
[    0.190130] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.190139] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.190243] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.190365] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.190496] pnp 00:03: [dma 2]
[    0.190583] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.190996] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.191529] pnp 00:05: [dma 3]
[    0.191675] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.192052] pnp: PnP ACPI: found 6 devices
[    0.192061] PnPBIOS: Disabled by ACPI PNP
[    0.231289] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.231316] clocksource: Switched to clocksource acpi_pm
[    0.231351] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.231361] pci 0000:00:01.0:   bridge window [mem 0xfca00000-0xfeafffff]
[    0.231367] pci 0000:00:01.0:   bridge window [mem 0xe7f00000-0xf7efffff pref]
[    0.231379] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.231383] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.231387] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.231391] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.231395] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xffdfffff window]
[    0.231399] pci_bus 0000:01: resource 1 [mem 0xfca00000-0xfeafffff]
[    0.231403] pci_bus 0000:01: resource 2 [mem 0xe7f00000-0xf7efffff pref]
[    0.231456] NET: Registered protocol family 2
[    0.231765] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.231796] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.231844] TCP: Hash tables configured (established 8192 bind 8192)
[    0.231901] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.231915] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.231997] NET: Registered protocol family 1
[    0.231997] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[    0.231997] pci 0000:00:11.0: Bypassing VIA 8237 APIC De-Assert Message
[    0.231997] pci 0000:01:00.0: Video device with shadowed ROM
[    0.231997] PCI: CLS 32 bytes, default 64
[    0.231997] Unpacking initramfs...
[    1.315359] Freeing initrd memory: 37060K
[    1.315736] Scanning for low memory corruption every 60 seconds
[    1.316531] audit: initializing netlink subsys (disabled)
[    1.316573] audit: type=2000 audit(1520114477.315:1): initialized
[    1.317062] Initialise system trusted keyring
[    1.317316] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.321273] zbud: loaded
[    1.321564] VFS: Disk quotas dquot_6.6.0
[    1.321650] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.322205] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.322810] fuse init (API version 7.23)
[    1.323161] Key type big_key registered
[    1.323195] Allocating IMA MOK and blacklist keyrings.
[    1.324074] Key type asymmetric registered
[    1.324082] Asymmetric key parser 'x509' registered
[    1.324112] bounce: pool size: 64 pages
[    1.324206] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.324280] io scheduler noop registered
[    1.324287] io scheduler deadline registered (default)
[    1.324371] io scheduler cfq registered
[    1.324672] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.324689] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.324770] efifb: probing for efifb
[    1.324777] efifb: cannot reserve video memory at 0xa0000
[    1.324782] efifb: framebuffer at 0xa0000, mapped to 0xc00a0000, using 64k, total 64k
[    1.324785] efifb: mode is 640x480x1, linelength=80, pages=1
[    1.324787] efifb: scrolling: redraw
[    1.324791] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.324990] Console: switching to colour frame buffer device 80x30
[    1.325008] fb0: EFI VGA frame buffer device
[    1.325180] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.325189] ACPI: Power Button [PWRB]
[    1.325312] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    1.325319] ACPI: Sleep Button [SLPB]
[    1.325414] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.325419] ACPI: Power Button [PWRF]
[    1.325759] GHES: HEST is not enabled!
[    1.325823] isapnp: Scanning for PnP cards...
[    1.328097] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.348511] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.352788] Linux agpgart interface v0.103
[    1.352991] agpgart: Detected VIA PT880 chipset
[    1.356579] agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
[    1.363312] loop: module loaded
[    1.363990] libphy: Fixed MDIO Bus: probed
[    1.363998] tun: Universal TUN/TAP device driver, 1.6
[    1.364034] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.364155] PPP generic driver version 2.4.2
[    1.364325] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.364336] ehci-pci: EHCI PCI platform driver
[    1.364670] ehci-pci 0000:00:10.4: EHCI Host Controller
[    1.364687] ehci-pci 0000:00:10.4: new USB bus registered, assigned bus number 1
[    1.364765] ehci-pci 0000:00:10.4: irq 21, io mem 0xfebffd00
[    1.376037] ehci-pci 0000:00:10.4: USB 2.0 started, EHCI 1.00
[    1.376168] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.376175] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.376180] usb usb1: Product: EHCI Host Controller
[    1.376185] usb usb1: Manufacturer: Linux 4.4.0-116-generic ehci_hcd
[    1.376190] usb usb1: SerialNumber: 0000:00:10.4
[    1.376502] hub 1-0:1.0: USB hub found
[    1.376520] hub 1-0:1.0: 8 ports detected
[    1.377054] ehci-platform: EHCI generic platform driver
[    1.377087] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.377098] ohci-pci: OHCI PCI platform driver
[    1.377133] ohci-platform: OHCI generic platform driver
[    1.377159] uhci_hcd: USB Universal Host Controller Interface driver
[    1.377408] uhci_hcd 0000:00:10.0: UHCI Host Controller
[    1.377425] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[    1.377436] uhci_hcd 0000:00:10.0: detected 2 ports
[    1.377461] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000c000
[    1.377562] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.377568] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.377573] usb usb2: Product: UHCI Host Controller
[    1.377578] usb usb2: Manufacturer: Linux 4.4.0-116-generic uhci_hcd
[    1.377583] usb usb2: SerialNumber: 0000:00:10.0
[    1.377875] hub 2-0:1.0: USB hub found
[    1.377893] hub 2-0:1.0: 2 ports detected
[    1.378357] uhci_hcd 0000:00:10.1: UHCI Host Controller
[    1.378370] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[    1.378380] uhci_hcd 0000:00:10.1: detected 2 ports
[    1.378405] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000c400
[    1.378506] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.378512] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.378516] usb usb3: Product: UHCI Host Controller
[    1.378521] usb usb3: Manufacturer: Linux 4.4.0-116-generic uhci_hcd
[    1.378526] usb usb3: SerialNumber: 0000:00:10.1
[    1.378809] hub 3-0:1.0: USB hub found
[    1.378826] hub 3-0:1.0: 2 ports detected
[    1.379288] uhci_hcd 0000:00:10.2: UHCI Host Controller
[    1.379302] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[    1.379311] uhci_hcd 0000:00:10.2: detected 2 ports
[    1.379336] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000c800
[    1.379435] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.379441] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.379446] usb usb4: Product: UHCI Host Controller
[    1.379450] usb usb4: Manufacturer: Linux 4.4.0-116-generic uhci_hcd
[    1.379455] usb usb4: SerialNumber: 0000:00:10.2
[    1.379744] hub 4-0:1.0: USB hub found
[    1.379762] hub 4-0:1.0: 2 ports detected
[    1.380267] uhci_hcd 0000:00:10.3: UHCI Host Controller
[    1.380283] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[    1.380293] uhci_hcd 0000:00:10.3: detected 2 ports
[    1.380318] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000cc00
[    1.380426] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.380432] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.380437] usb usb5: Product: UHCI Host Controller
[    1.380442] usb usb5: Manufacturer: Linux 4.4.0-116-generic uhci_hcd
[    1.380447] usb usb5: SerialNumber: 0000:00:10.3
[    1.380741] hub 5-0:1.0: USB hub found
[    1.380758] hub 5-0:1.0: 2 ports detected
[    1.381156] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    1.381161] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    1.381422] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.381708] mousedev: PS/2 mouse device common for all mice
[    1.382166] rtc_cmos 00:01: RTC can wake from S4
[    1.382422] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    1.382473] rtc_cmos 00:01: alarms up to one year, y3k, 114 bytes nvram
[    1.382497] i2c /dev entries driver
[    1.382657] device-mapper: uevent: version 1.0.3
[    1.382832] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    1.382903] platform eisa.0: Probing EISA bus 0
[    1.382909] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    1.382915] platform eisa.0: Cannot allocate resource for EISA slot 1
[    1.382920] platform eisa.0: Cannot allocate resource for EISA slot 2
[    1.382926] platform eisa.0: Cannot allocate resource for EISA slot 3
[    1.382931] platform eisa.0: Cannot allocate resource for EISA slot 4
[    1.382936] platform eisa.0: Cannot allocate resource for EISA slot 5
[    1.382941] platform eisa.0: Cannot allocate resource for EISA slot 6
[    1.382946] platform eisa.0: Cannot allocate resource for EISA slot 7
[    1.382952] platform eisa.0: Cannot allocate resource for EISA slot 8
[    1.382956] platform eisa.0: EISA: Detected 0 cards
[    1.382990] cpufreq-nforce2: No nForce2 chipset.
[    1.383008] ledtrig-cpu: registered to indicate activity on CPUs
[    1.383722] NET: Registered protocol family 10
[    1.384270] NET: Registered protocol family 17
[    1.384295] Key type dns_resolver registered
[    1.384834] microcode: CPU0 sig=0xf33, pf=0x4, revision=0x7
[    1.384849] microcode: CPU1 sig=0xf33, pf=0x4, revision=0x7
[    1.384946] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.384968] Using IPI No-Shortcut mode
[    1.385327] registered taskstats version 1
[    1.385356] Loading compiled-in X.509 certificates
[    1.391814] Loaded X.509 cert 'Build time autogenerated kernel key: ff54afc682e3d37ddd1801097f0724ac37994f02'
[    1.391853] zswap: loaded using pool lzo/zbud
[    1.396952] Key type trusted registered
[    1.406184] Key type encrypted registered
[    1.406205] AppArmor: AppArmor sha1 policy hashing enabled
[    1.406214] ima: No TPM chip found, activating TPM-bypass!
[    1.406263] evm: HMAC attrs: 0x1
[    1.406757]   Magic number: 10:501:46
[    1.406907] rtc_cmos 00:01: setting system clock to 2018-03-03 22:01:17 UTC (1520114477)
[    1.407141] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.407145] EDD information not available.
[    1.407291] PM: Hibernation image not present or could not be loaded.
[    1.407511] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.679974] isapnp: No Plug & Play device found
[    1.680848] Freeing unused kernel memory: 948K
[    1.680989] Write protecting the kernel text: 8012k
[    1.681059] Write protecting the kernel read-only data: 3176k
[    1.688061] usb 1-3: new high-speed USB device number 2 using ehci-pci
[    1.707702] random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    1.707993] random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    1.709919] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    1.746655] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    1.746824] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    1.747420] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    1.747695] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    1.747945] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    1.748800] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    1.749073] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    1.825115] usb 1-3: New USB device found, idVendor=03f0, idProduct=5a11
[    1.825124] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.825131] usb 1-3: Product: Photosmart C7100 series
[    1.825137] usb 1-3: Manufacturer: HP
[    1.825142] usb 1-3: SerialNumber: MY6CIG71DM04KS
[    1.877134] usb-storage 1-3:1.3: USB Mass Storage device detected
[    1.880189] scsi host0: usb-storage 1-3:1.3
[    1.880441] usbcore: registered new interface driver usb-storage
[    1.890160] usbcore: registered new interface driver uas
[    1.901215] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    1.931967] pata_via 0000:00:0f.1: version 0.3.4
[    1.948641] Floppy drive(s): fd0 is 1.44M
[    1.961278] [drm] Initialized drm 1.1.0 20060810
[    1.968052] FDC 0 is a post-1991 82077
[    1.991734] scsi host1: pata_via
[    1.999555] scsi host2: pata_via
[    1.999752] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[    1.999760] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[    1.999919] sata_via 0000:00:0f.0: version 2.6
[    2.000267] sata_via 0000:00:0f.0: routed to hard irq line 11
[    2.010704] scsi host3: sata_via
[    2.026647] scsi host4: sata_via
[    2.026850] ata3: SATA max UDMA/133 cmd 0xec00 ctl 0xe800 bmdma 0xdc00 irq 20
[    2.026858] ata4: SATA max UDMA/133 cmd 0xe400 ctl 0xe000 bmdma 0xdc08 irq 20
[    2.027066] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.027368] r8169 0000:00:07.0: PCI: Disallowing DAC for device
[    2.027393] r8169 0000:00:07.0 (unnamed net_device) (uninitialized): not PCI Express
[    2.027967] r8169 0000:00:07.0 eth0: RTL8110s at 0xf8422f00, 00:0c:76:bf:3d:7d, XID 04000000 IRQ 18
[    2.027976] r8169 0000:00:07.0 eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok]
[    2.068043] usb 3-2: new low-speed USB device number 2 using uhci_hcd
[    2.069344] wmi: Mapper loaded
[    2.112074] firewire_ohci 0000:00:0d.0: added OHCI v1.0 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[    2.171312] r8169 0000:00:07.0 enp0s7: renamed from eth0
[    2.228128] ata3: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[    2.240179] checking generic (a0000 10000) vs hw (e8000000 8000000)
[    2.240186] fb: switching to nouveaufb from EFI VGA
[    2.240241] Console: switching to colour dummy device 80x25
[    2.240727] nouveau 0000:01:00.0: NVIDIA NV34 (034200a2)
[    2.257106] usb 3-2: New USB device found, idVendor=046d, idProduct=c03d
[    2.257114] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.257120] usb 3-2: Product: USB-PS/2 Optical Mouse
[    2.257125] usb 3-2: Manufacturer: Logitech
[    2.282984] hidraw: raw HID events driver (C) Jiri Kosina
[    2.309886] usbcore: registered new interface driver usbhid
[    2.309892] usbhid: USB HID core driver
[    2.319327] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.0/0003:046D:C03D.0001/input/input4
[    2.320331] hid-generic 0003:046D:C03D.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.1-2/input0
[    2.329857] nouveau 0000:01:00.0: bios: version 04.34.20.16.00
[    2.329876] tsc: Refined TSC clocksource calibration: 3013.528 MHz
[    2.329883] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b703065666, max_idle_ns: 440795219758 ns
[    2.331245] agpgart-via 0000:00:00.0: AGP 3.5 bridge
[    2.331267] agpgart: systemd-udevd tried to set rate=x12. Setting to AGP3 x8 mode.
[    2.331282] agpgart-via 0000:00:00.0: putting AGP V3 device into 8x mode
[    2.331361] nouveau 0000:01:00.0: putting AGP V3 device into 8x mode
[    2.331499] agpgart-via 0000:00:00.0: AGP 3.5 bridge
[    2.331518] agpgart: systemd-udevd tried to set rate=x12. Setting to AGP3 x8 mode.
[    2.331531] agpgart-via 0000:00:00.0: putting AGP V3 device into 8x mode
[    2.331608] nouveau 0000:01:00.0: putting AGP V3 device into 8x mode
[    2.331667] nouveau 0000:01:00.0: tmr: unknown input clock freq
[    2.331682] nouveau 0000:01:00.0: fb: 128 MiB DDR1
[    2.339408] [TTM] Zone  kernel: Available graphics memory: 431562 kiB
[    2.339413] [TTM] Zone highmem: Available graphics memory: 1809838 kiB
[    2.339415] [TTM] Initializing pool allocator
[    2.339431] [TTM] Initializing DMA pool allocator
[    2.339457] nouveau 0000:01:00.0: DRM: VRAM: 127 MiB
[    2.339461] nouveau 0000:01:00.0: DRM: GART: 64 MiB
[    2.339466] nouveau 0000:01:00.0: DRM: BMP version 5.38
[    2.339471] nouveau 0000:01:00.0: DRM: DCB version 2.2
[    2.339477] nouveau 0000:01:00.0: DRM: DCB outp 00: 01010300 00009c40
[    2.339482] nouveau 0000:01:00.0: DRM: DCB outp 01: 02020321 00000033
[    2.339578] nouveau 0000:01:00.0: DRM: Loading NV17 power sequencing microcode
[    2.341416] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.341423] [drm] Driver supports precise vblank timestamp query.
[    2.345411] nouveau 0000:01:00.0: DRM: MM: using M2MF for buffer copies
[    2.345430] nouveau 0000:01:00.0: DRM: Setting dpms mode 3 on TV encoder (output 1)
[    2.400471] nouveau 0000:01:00.0: DRM: allocated 1024x768 fb: 0x9000, bo f587e000
[    2.400666] fbcon: nouveaufb (fb0) is primary device
[    2.400828] Console: switching to colour frame buffer device 128x48
[    2.400881] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[    2.416055] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[    2.464380] ata2.00: ATAPI: LITE-ON CD-RW SOHR-5238S, 4S04, max UDMA/33
[    2.464392] ata2.01: ATAPI: LITE-ON DVD SOHD-167T, 9S13, max UDMA/33
[    2.480238] ata2.00: configured for UDMA/33
[    2.480682] ata2.01: configured for UDMA/33
[    2.482327] scsi 2:0:0:0: CD-ROM            LITE-ON  CD-RW SOHR-5238S 4S04 PQ: 0 ANSI: 5
[    2.496893] sr 2:0:0:0: [sr0] scsi3-mmc drive: 174x/52x writer cd/rw xa/form2 cdda tray
[    2.496899] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.497299] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    2.497617] sr 2:0:0:0: Attached scsi generic sg0 type 5
[    2.498371] scsi 2:0:1:0: CD-ROM            LITE-ON  DVD SOHD-167T    9S13 PQ: 0 ANSI: 5
[    2.512563] sr 2:0:1:0: [sr1] scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[    2.512939] sr 2:0:1:0: Attached scsi CD-ROM sr1
[    2.513221] sr 2:0:1:0: Attached scsi generic sg1 type 5
[    2.612190] firewire_core 0000:00:0d.0: created device fw0: GUID 00dc1000df045c00, S400
[    2.716033] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.880403] ata4.00: ATA-7: Maxtor 6Y080M0, YAR51HW0, max UDMA/133
[    2.880412] ata4.00: 160086528 sectors, multi 16: LBA 
[    2.881162] scsi 0:0:0:0: Direct-Access     HP       Photosmart C7180 1.00 PQ: 0 ANSI: 2
[    2.881904] sd 0:0:0:0: Attached scsi generic sg2 type 0
[    2.885682] sd 0:0:0:0: [sda] Attached SCSI removable disk
[    2.888432] ata4.00: configured for UDMA/133
[    2.888698] scsi 4:0:0:0: Direct-Access     ATA      Maxtor 6Y080M0   1HW0 PQ: 0 ANSI: 5
[    2.889197] sd 4:0:0:0: [sdb] 160086528 512-byte logical blocks: (82.0 GB/76.3 GiB)
[    2.889326] sd 4:0:0:0: Attached scsi generic sg3 type 0
[    2.889344] sd 4:0:0:0: [sdb] Write Protect is off
[    2.889371] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.889443] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.923348]  sdb: sdb1 sdb2 < sdb5 >
[    2.924259] sd 4:0:0:0: [sdb] Attached SCSI disk
[    3.328165] clocksource: Switched to clocksource tsc
[    3.680352] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[    4.490498] random: nonblocking pool is initialized
[    5.128751] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    5.129023] systemd[1]: Detected architecture x86.
[    5.150902] systemd[1]: Set hostname to <greg-desktop>.
[    6.783112] systemd[1]: Listening on Syslog Socket.
[    6.783387] systemd[1]: Listening on Journal Audit Socket.
[    6.783421] systemd[1]: Reached target Encrypted Volumes.
[    6.783447] systemd[1]: Reached target User and Group Name Lookups.
[    6.783514] systemd[1]: Listening on udev Kernel Socket.
[    6.783618] systemd[1]: Started Trigger resolvconf update for networkd DNS.
[    6.783921] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    6.783996] systemd[1]: Listening on fsck to fsckd communication Socket.
[    6.784136] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    6.784164] systemd[1]: Reached target Remote File Systems (Pre).
[    6.784189] systemd[1]: Reached target Remote File Systems.
[    6.784285] systemd[1]: Listening on Journal Socket.
[    6.784525] systemd[1]: Created slice User and Session Slice.
[    6.784597] systemd[1]: Listening on Journal Socket (/dev/log).
[    6.784754] systemd[1]: Created slice System Slice.
[    6.784791] systemd[1]: Reached target Slices.
[    6.800383] systemd[1]: Starting Set console keymap...
[    6.801944] systemd[1]: Mounting Huge Pages File System...
[    6.803814] systemd[1]: Mounting Debug File System...
[    6.805378] systemd[1]: Mounting POSIX Message Queue File System...
[    6.807409] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    6.809588] systemd[1]: Starting Journal Service...
[    6.811243] systemd[1]: Starting Nameserver information manager...
[    7.024422] systemd[1]: Started Read required files in advance.
[    7.188727] systemd[1]: Starting Load Kernel Modules...
[    7.188955] systemd[1]: Listening on udev Control Socket.
[    7.190786] systemd[1]: Started Braille Device Support.
[    7.191313] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    7.193062] systemd[1]: Starting Uncomplicated firewall...
[    7.198789] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    7.296427] systemd[1]: Starting Create Static Device Nodes in /dev...
[    7.815301] systemd[1]: Started Uncomplicated firewall.
[    7.899630] systemd[1]: Mounted Debug File System.
[    7.901677] systemd[1]: Mounted POSIX Message Queue File System.
[    7.901794] systemd[1]: Mounted Huge Pages File System.
[    7.976455] systemd[1]: Started Nameserver information manager.
[    7.997995] systemd[1]: Reached target Network (Pre).
[    8.209113] lp: driver loaded but no devices found
[    8.283202] ppdev: user-space parallel port driver
[    8.360189] parport_pc 00:05: reported by Plug and Play ACPI
[    8.360319] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[    8.369596] systemd[1]: Started Journal Service.
[    8.456271] lp0: using parport0 (interrupt-driven).
[   12.055360] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
[   12.475872] systemd-journald[211]: Received request to flush runtime journal from PID 1
[   14.291215] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   14.687108] ACPI Warning: SystemIO range 0x0000000000000400-0x0000000000000407 conflicts with OpRegion 0x0000000000000400-0x0000000000000406 (\SMOV) (20150930/utaddress-254)
[   14.687127] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   15.664071] MPU-401 device not found or device busy
[   19.836966] audit: type=1400 audit(1520114495.925:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=548 comm="apparmor_parser"
[   19.836991] audit: type=1400 audit(1520114495.925:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=548 comm="apparmor_parser"
[   19.837011] audit: type=1400 audit(1520114495.925:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=548 comm="apparmor_parser"
[   19.837032] audit: type=1400 audit(1520114495.925:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=548 comm="apparmor_parser"
[   20.093971] audit: type=1400 audit(1520114496.181:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=547 comm="apparmor_parser"
[   20.094000] audit: type=1400 audit(1520114496.181:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=547 comm="apparmor_parser"
[   20.636212] audit: type=1400 audit(1520114496.725:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=619 comm="apparmor_parser"
[   20.636244] audit: type=1400 audit(1520114496.725:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=619 comm="apparmor_parser"
[   20.636263] audit: type=1400 audit(1520114496.725:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//snap_update_ns" pid=619 comm="apparmor_parser"
[   20.979170] audit: type=1400 audit(1520114497.069:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/unreal-*/System/*.bin" pid=624 comm="apparmor_parser"
[   22.204663] Adding 2096124k swap on /dev/sdb5.  Priority:-1 extents:1 across:2096124k FS
[   39.486090] IPv6: ADDRCONF(NETDEV_UP): enp0s7: link is not ready
[   39.496677] r8169 0000:00:07.0 enp0s7: link down
[   39.496685] r8169 0000:00:07.0 enp0s7: link down
[   39.496749] IPv6: ADDRCONF(NETDEV_UP): enp0s7: link is not ready
[   40.131092] usblp 1-3:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x5A11
[   40.132712] usbcore: registered new interface driver usblp
[   47.550055] usblp0: removed
[   47.558846] usblp 1-3:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x5A11
[   57.310992] r8169 0000:00:07.0 enp0s7: link up
[   57.311021] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s7: link becomes ready

Merci aussi pour le PS. J'ai modifié.

Dernière modification par hibou7 (Le 04/03/2018, à 00:16)

moko138 · Le 04/03/2018, à 05:33

Zut, on est encore à 57" !
Et IPv6 est toujours là.

- -

J'aurais aussi pu commenter les dernières lignes de /etc/hosts avec sudo nano non?

Bien sûr.
Mais montre :

ls -la /etc/xdg/autostart
ls -la ~/.config/autostart

- -

[   39.496749] IPv6: ADDRCONF(NETDEV_UP): enp0s7: link is not ready
[   40.131092] usblp 1-3:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x5A11
[   40.132712] usbcore: registered new interface driver usblp
[   47.550055] usblp0: removed
[   47.558846] usblp 1-3:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x5A11

Tu as rebranché l'imprimante ???
Huit secondes !

- -

[   22.204663] Adding 2096124k swap on /dev/sdb5.  Priority:-1 extents:1 across:2096124k FS
[   39.486090] IPv6: ADDRCONF(NETDEV_UP): enp0s7: link is not ready
[   39.496677] r8169 0000:00:07.0 enp0s7: link down

[   57.310992] r8169 0000:00:07.0 enp0s7: link up

Donc réseau et imprimante cumulés : 35 secondes.
- -

r8169 : C'est le module de ta carte réseau filaire. Récemment, il y a eu plusieurs fils résolus concernant des cartes realtek utilisant ce module. Montre :

sudo lshw -c network ; echo ; lspci -vnn | grep -iA8 net

Mais, pour venir à bout de cette lenteur initiale, je t'invite à ouvrir sans délai un fil spécifique dans la section "Réseaux", en y donnant le log de wificheck. (Tu indiqueras l'url ici pour qu'on puisse vous y rejoindre.)

hibou7 · Le 04/03/2018, à 18:50

Voilà:

gregexp@greg-desktop:~$ ls -la /etc/xdg/autostart
total 128
drwxr-xr-x 2 root root 4096 févr. 26 15:33 .
drwxr-xr-x 9 root root 4096 janv. 28 18:14 ..
-rw-r--r-- 1 root root  202 févr. 25  2016 at-spi-dbus-bus.desktop
-rw-r--r-- 1 root root  194 mars  31  2016 blueman.desktop
-rw-r--r-- 1 root root  462 juin  24  2016 evolution-alarm-notify.desktop
-rw-r--r-- 1 root root  485 nov.   1  2015 gnome-keyring-pkcs11.desktop
-rw-r--r-- 1 root root  478 nov.   1  2015 gnome-keyring-secrets.desktop
-rw-r--r-- 1 root root  445 nov.   1  2015 gnome-keyring-ssh.desktop
-rw-r--r-- 1 root root  183 févr. 16  2017 gnome-software-service.desktop
-rw-r--r-- 1 root root  279 nov.  27  2015 gsettings-data-convert.desktop
-rw-r--r-- 1 root root  262 janv. 20  2017 indicator-application.desktop
-rw-r--r-- 1 root root  281 mai    5  2015 indicator-messages.desktop
-rw-r--r-- 1 root root  293 avril  7  2016 indicator-sound.desktop
-rw-r--r-- 1 root root 2445 déc.  21  2015 light-locker.desktop
-rw-r--r-- 1 root root  350 mars   6  2017 nm-applet.desktop
-rw-r--r-- 1 root root  289 avril 18  2016 onboard-autostart.desktop
-rw-r--r-- 1 root root  358 nov.  21  2014 polkit-gnome-authentication-agent-1.desktop
-rw-r--r-- 1 root root  375 mars   8  2016 print-applet.desktop
-rw-r--r-- 1 root root 4474 janv.  6  2017 pulseaudio.desktop
-rw-r--r-- 1 root root 9344 mars  28  2017 update-notifier.desktop
-rw-r--r-- 1 root root  312 juil.  3  2013 user-dirs-update-gtk.desktop
-rw-r--r-- 1 root root 3109 mars  12  2015 xfce4-clipman-plugin-autostart.desktop
-rw-r--r-- 1 root root 3460 juil. 10  2015 xfce4-notes-autostart.desktop
-rw-r--r-- 1 root root 5182 janv.  4  2016 xfce4-power-manager.desktop
-rw-r--r-- 1 root root  223 févr. 22  2015 xfce4-volumed.desktop
-rw-r--r-- 1 root root 2280 mai   14  2015 xfsettingsd.desktop
-rw-r--r-- 1 root root 4818 mai   26  2015 xscreensaver.desktop

gregexp@greg-desktop:~$ ls -la ~/.config/autostart
total 24
drwxrwxr-x  2 gregexp gregexp 4096 mars   4 16:27 .
drwx------ 51 gregexp gregexp 4096 févr. 26 18:29 ..
-rw-rw-r--  1 gregexp gregexp  273 août  25  2017 redshift-gtk.desktop
-rw-rw-r--  1 gregexp gregexp 2898 mars   4 16:27 xfce4-clipman-plugin-autostart.desktop
-rw-rw-r--  1 gregexp gregexp 2435 mars   4 16:27 xfce4-notes-autostart.desktop
-rw-rw-r--  1 gregexp gregexp   29 juin  29  2014 xfce4-settings-helper-autostart.desktop

Oui j'ai rebranché l'imprimante. Cet ordi, toute la famille s'en sert, alors si l'imprimante n'est pas disponible plusieurs jours, ça fait des histoires
8 secondes pour connecter une imprimante c'est trop? Où est le problème?
Ce qui me gène vraiment, c'est d'attendre 28 sec pour IPv6.

Pour la carte Ethernet:

greg@greg-desktop:/home/gregexp$ sudo lshw -c network ; echo ; lspci -vnn | grep -iA8 net
[sudo] Mot de passe de greg : 
  *-network               
       description: Ethernet interface
       produit: RTL8169 PCI Gigabit Ethernet Controller
       fabriquant: Realtek Semiconductor Co., Ltd.
       identifiant matériel: 7
       information bus: pci@0000:00:07.0
       nom logique: enp0s7
       version: 10
       numéro de série: 00:0c:76:bf:3d:7d
       taille: 100Mbit/s
       capacité: 1Gbit/s
       bits: 32 bits
       horloge: 66MHz
       fonctionnalités: pm bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full ip=192.168.178.20 latency=64 link=yes maxlatency=64 mingnt=32 multicast=yes port=MII speed=100Mbit/s
       ressources: irq:18 portE/S:d400(taille=256) mémoire:febfff00-febfffff mémoire:febc0000-febdffff

00:07.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8169 PCI Gigabit Ethernet Controller [10ec:8169] (rev 10)
	Subsystem: Micro-Star International Co., Ltd. [MSI] RTL8169 PCI Gigabit Ethernet Controller [1462:008c]
	Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18
	I/O ports at d400 [size=256]
	Memory at febfff00 (32-bit, non-prefetchable) [size=256]
	Expansion ROM at febc0000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: r8169
	Kernel modules: r8169

Une question avant de faire passer ce fil vers la section "Réseaux".
Je viens de lire la doc wificheck:

Wificheck est un script bash créé pour faciliter la récolte des informations nécessaires à la résolution d'une majorité des problèmes rencontrés avec les connexions sans-fil.

Comment ce script peut-il s'appliquer à un ordi qui n'a pas la possibilité d'avoir une connexion sans fil?

Merci pour ta persévérance.

Dernière modification par hibou7 (Le 04/03/2018, à 18:51)

moko138 · Le 04/03/2018, à 19:31

Ne brancher l'imprimante qu'après le démarrage permet de sérier les problèmes. Mais...

toute la famille s'en sert, alors si l'imprimante n'est pas disponible plusieurs jours, ça fait des histoires
8 secondes pour connecter une imprimante c'est trop? Où est le problème?

Vu ces conditions, je comprends que tu la branches.
- -

wificheck est un outil plein de renseignements sur le réseau en général, pas seulement pour la wifi.
D'ailleurs je ne comprends pas que les infos qu'il donne ne soient demandées qu'en tête de la seule sous-section wifi, alors que ce script aurait sa place dans la section "Réseaux".

hibou7 · Le 04/03/2018, à 21:53

gregexp@greg-desktop:~$ su greg
Mot de passe : 
greg@greg-desktop:/home/gregexp$ wget -N -t 5 -T 10 https://framagit.org/cracolinux/wificheck/raw/master/wificheck && chmod +x wificheck && ./wificheck
--2018-03-04 20:46:07--  https://framagit.org/cracolinux/wificheck/raw/master/wificheck
Résolution de framagit.org (framagit.org)… 144.76.206.42, 2a01:4f8:200:1302::42
Connexion à framagit.org (framagit.org)|144.76.206.42|:443… connecté.
requête HTTP transmise, en attente de la réponse… 200 OK
Taille : 2012 (2,0K) [text/plain]
wificheck: Permission non accordée

Impossible d’écrire dans «wificheck» (Succès).

C'était le reour de wificheck. Mais j'ai bien trouvé un wificheck.log dans mon home.
Je me lance, c'est ici.

wificheck est un outil plein de renseignements sur le réseau en général, pas seulement pour la wifi.
D'ailleurs je ne comprends pas que les infos qu'il donne ne soient demandées qu'en tête de la seule sous-section wifi, alors que ce script aurait sa place dans la section "Réseaux".

Je croyais que tu étais contributeur de la doc (?) Tu pourrais le proposer sur la liste de distribution.

Dernière modification par hibou7 (Le 04/03/2018, à 22:28)

moko138 · Le 04/03/2018, à 23:39

Pour la partie réseau, ça continue là ./viewtopic.php?id=2023188.

maxire · Le 05/03/2018, à 11:30

Salut,

moko138 a écrit :

. Pour désactiver l'ipv6,
La méthode 2 est périmée - la page elle-même te le signale, en haut.

C'est surtout une méthode qui ne fonctionne pas et n'a certainement jamais fonctionné.
Désactiver IPV6 en supprimant l'accès aux serveurs mDns IPV4, j'ai du mal à comprendre!

moko138 · Le 07/03/2018, à 05:18

En #8 nous avions fait une copie de sécurité :
sudo cp -av /etc/hosts /etc/hosts.20180302

Rétablissons-la :

sudo cp -av /etc/hosts.20180302  /etc/hosts

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 26/02/2018, à 21:09

Boot trop lent

#2 Le 27/02/2018, à 09:22

Re : Boot trop lent

#3 Le 27/02/2018, à 21:44

Re : Boot trop lent

#4 Le 27/02/2018, à 23:16

Re : Boot trop lent

#5 Le 01/03/2018, à 21:54

Re : Boot trop lent

#6 Le 02/03/2018, à 12:33

Re : Boot trop lent

#7 Le 03/03/2018, à 02:29

Re : Boot trop lent

#8 Le 03/03/2018, à 08:11

Re : Boot trop lent

#9 Le 04/03/2018, à 00:15

Re : Boot trop lent

#10 Le 04/03/2018, à 05:33

Re : Boot trop lent

#11 Le 04/03/2018, à 18:50

Re : Boot trop lent

#12 Le 04/03/2018, à 19:31

Re : Boot trop lent

#13 Le 04/03/2018, à 21:53

Re : Boot trop lent

#14 Le 04/03/2018, à 23:39

Re : Boot trop lent

#15 Le 05/03/2018, à 11:30

Re : Boot trop lent

#16 Le 07/03/2018, à 05:18

Re : Boot trop lent

Pied de page des forums