Contenu | Rechercher | Menus

Annonce

L'équipe des administrateurs et modérateurs du forum vous invite à prendre connaissance des nouvelles règles.
En cas de besoin, vous pouvez intervenir dans cette discussion.

Ubuntu 18.04 LTS
Ubuntu-fr propose des clés USB de Ubuntu et toutes ses « saveurs » ainsi qu'un magnifique t-shirt pour cette toute nouvelle version d'Ubuntu !

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 14/05/2018, à 16:26

nicoG

écran clignotant why w840AU

bonjour
suite au remplacement de mon écran (et de la nappe) accidentellement cassé sur mon ordinateur portable clevo why w840AU, j'observe au bout d'un certain temps d'utilisation que le nouvel écran se met à clignoter de plus en plus.
si l'ordinateur portable est connecté à un écran externe (un samsung T220), l'écran externe ne clignote pas.
lorsque l'interface graphique est désactivé (le temps de la correction du bug d'unity lors de la mise à jour d'ubuntu 14.04 vers 16.04 LTS), l'écran n'a pas clignoté non plus.
D'où mon interrogation, le problème vient-il du nouvel écran que j'ai remplacé et qui serait défectueux d'origine, ou d'un problème de configuration de la carte graphique (ou un autre paramètre software que je ne connais pas) ?

détail de l'ordinateur :
Clevo 64bit why w840AU
Intel Pentium 3805U@1,9gHz*2
Intel Broadwell GT1

je n'ai pas trouvé xorg.conf

et pour xorg.0.log, voici ce qu'il contenait :

[     6.064] 
X.Org X Server 1.18.4
Release Date: 2016-07-19
[     6.064] X Protocol Version 11, Revision 0
[     6.064] Build Operating System: Linux 4.4.0-97-generic x86_64 Ubuntu
[     6.064] Current Operating System: Linux audrey-W840AU 4.4.0-124-generic #148-Ubuntu SMP Wed May 2 13:00:18 UTC 2018 x86_64
[     6.064] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-124-generic root=UUID=7f1c174e-7ef5-467f-8bca-f7af5c44bb2c ro quiet splash acpi_osi=Linux acpi_backlight=vendor vt.handoff=7
[     6.064] Build Date: 13 October 2017  01:57:05PM
[     6.064] xorg-server 2:1.18.4-0ubuntu0.7 (For technical support please see http://www.ubuntu.com/support) 
[     6.064] Current version of pixman: 0.33.6
[     6.064] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[     6.064] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     6.064] (==) Log file: "/var/log/Xorg.0.log", Time: Mon May 14 12:32:18 2018
[     6.072] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     6.072] (==) No Layout section.  Using the first Screen section.
[     6.072] (==) No screen section available. Using defaults.
[     6.072] (**) |-->Screen "Default Screen Section" (0)
[     6.072] (**) |   |-->Monitor "<default monitor>"
[     6.073] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[     6.073] (==) Automatically adding devices
[     6.073] (==) Automatically enabling devices
[     6.073] (==) Automatically adding GPU devices
[     6.073] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     6.073] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[     6.073] 	Entry deleted from font path.
[     6.073] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[     6.073] 	Entry deleted from font path.
[     6.073] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[     6.073] 	Entry deleted from font path.
[     6.073] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[     6.073] 	Entry deleted from font path.
[     6.073] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[     6.073] 	Entry deleted from font path.
[     6.073] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[     6.073] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[     6.073] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[     6.073] (II) Loader magic: 0x563d74ffedc0
[     6.073] (II) Module ABI versions:
[     6.073] 	X.Org ANSI C Emulation: 0.4
[     6.073] 	X.Org Video Driver: 20.0
[     6.073] 	X.Org XInput driver : 22.1
[     6.073] 	X.Org Server Extension : 9.0
[     6.074] (++) using VT number 7

[     6.074] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[     6.075] (II) xfree86: Adding drm device (/dev/dri/card0)
[     6.077] (--) PCI:*(0:0:2:0) 8086:1606:1558:8402 rev 8, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, I/O @ 0x0000f000/64
[     6.077] (II) LoadModule: "glx"
[     6.082] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     6.098] (II) Module glx: vendor="X.Org Foundation"
[     6.098] 	compiled for 1.18.4, module version = 1.0.0
[     6.098] 	ABI class: X.Org Server Extension, version 9.0
[     6.098] (==) AIGLX enabled
[     6.099] (==) Matched intel as autoconfigured driver 0
[     6.099] (==) Matched intel as autoconfigured driver 1
[     6.099] (==) Matched modesetting as autoconfigured driver 2
[     6.099] (==) Matched fbdev as autoconfigured driver 3
[     6.099] (==) Matched vesa as autoconfigured driver 4
[     6.099] (==) Assigned the driver to the xf86ConfigLayout
[     6.099] (II) LoadModule: "intel"
[     6.099] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[     6.103] (II) Module intel: vendor="X.Org Foundation"
[     6.104] 	compiled for 1.18.4, module version = 2.99.917
[     6.104] 	Module class: X.Org Video Driver
[     6.104] 	ABI class: X.Org Video Driver, version 20.0
[     6.104] (II) LoadModule: "modesetting"
[     6.104] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     6.105] (II) Module modesetting: vendor="X.Org Foundation"
[     6.105] 	compiled for 1.18.4, module version = 1.18.4
[     6.105] 	Module class: X.Org Video Driver
[     6.105] 	ABI class: X.Org Video Driver, version 20.0
[     6.105] (II) LoadModule: "fbdev"
[     6.105] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[     6.106] (II) Module fbdev: vendor="X.Org Foundation"
[     6.106] 	compiled for 1.18.1, module version = 0.4.4
[     6.106] 	Module class: X.Org Video Driver
[     6.106] 	ABI class: X.Org Video Driver, version 20.0
[     6.106] (II) LoadModule: "vesa"
[     6.106] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[     6.107] (II) Module vesa: vendor="X.Org Foundation"
[     6.107] 	compiled for 1.18.1, module version = 2.3.4
[     6.107] 	Module class: X.Org Video Driver
[     6.107] 	ABI class: X.Org Video Driver, version 20.0
[     6.107] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[     6.107] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[     6.107] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[     6.107] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[     6.107] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     6.107] (II) FBDEV: driver for framebuffer: fbdev
[     6.107] (II) VESA: driver for VESA chipsets: vesa
[     6.108] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20151010
[     6.108] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917+git20160325-1ubuntu1.2 (Timo Aaltonen <tjaalton@debian.org>)
[     6.108] (II) intel(0): SNA compiled for use with valgrind
[     6.109] (WW) Falling back to old probe method for modesetting
[     6.109] (WW) Falling back to old probe method for fbdev
[     6.109] (II) Loading sub module "fbdevhw"
[     6.109] (II) LoadModule: "fbdevhw"
[     6.109] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[     6.110] (II) Module fbdevhw: vendor="X.Org Foundation"
[     6.110] 	compiled for 1.18.4, module version = 0.0.2
[     6.110] 	ABI class: X.Org Video Driver, version 20.0
[     6.110] (WW) Falling back to old probe method for vesa
[     6.111] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics
[     6.111] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2; using a maximum of 2 threads
[     6.111] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[     6.111] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[     6.111] (==) intel(0): RGB weight 888
[     6.111] (==) intel(0): Default visual is TrueColor
[     6.111] (II) intel(0): Output eDP1 has no monitor section
[     6.128] (--) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[     6.128] (II) intel(0): Enabled output eDP1
[     6.128] (II) intel(0): Output HDMI1 has no monitor section
[     6.128] (II) intel(0): Enabled output HDMI1
[     6.128] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[     6.128] (II) intel(0): Output VIRTUAL1 has no monitor section
[     6.128] (II) intel(0): Enabled output VIRTUAL1
[     6.128] (--) intel(0): Output eDP1 using initial mode 1600x900 on pipe 0
[     6.128] (--) intel(0): Output HDMI1 using initial mode 1680x1050 on pipe 1
[     6.128] (==) intel(0): TearFree disabled
[     6.128] (==) intel(0): DPI set to (96, 96)
[     6.128] (II) Loading sub module "dri2"
[     6.128] (II) LoadModule: "dri2"
[     6.128] (II) Module "dri2" already built-in
[     6.128] (II) Loading sub module "present"
[     6.128] (II) LoadModule: "present"
[     6.128] (II) Module "present" already built-in
[     6.128] (II) UnloadModule: "modesetting"
[     6.128] (II) Unloading modesetting
[     6.128] (II) UnloadModule: "fbdev"
[     6.128] (II) Unloading fbdev
[     6.128] (II) UnloadSubModule: "fbdevhw"
[     6.128] (II) Unloading fbdevhw
[     6.128] (II) UnloadModule: "vesa"
[     6.128] (II) Unloading vesa
[     6.129] (==) Depth 24 pixmap format is 32 bpp
[     6.133] (II) intel(0): SNA initialized with Broadwell (gen8) backend
[     6.133] (==) intel(0): Backing store enabled
[     6.133] (==) intel(0): Silken mouse enabled
[     6.135] (II) intel(0): HW Cursor enabled
[     6.135] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[     6.135] (==) intel(0): DPMS enabled
[     6.135] (==) intel(0): Display hotplug detection enabled
[     6.135] (II) intel(0): [DRI2] Setup complete
[     6.135] (II) intel(0): [DRI2]   DRI driver: i965
[     6.135] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[     6.135] (II) intel(0): direct rendering: DRI2 enabled
[     6.136] (II) intel(0): hardware support for Present enabled
[     6.136] (--) RandR disabled
[     6.148] (II) SELinux: Disabled on system
[     6.194] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[     6.194] (II) AIGLX: enabled GLX_ARB_create_context
[     6.194] (II) AIGLX: enabled GLX_ARB_create_context_profile
[     6.194] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[     6.195] (II) AIGLX: enabled GLX_INTEL_swap_event
[     6.195] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[     6.195] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[     6.195] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[     6.195] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[     6.195] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[     6.195] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[     6.195] (II) AIGLX: Loaded and initialized i965
[     6.195] (II) GLX: Initialized DRI2 GL provider for screen 0
[     6.200] (II) intel(0): switch to mode 1600x900@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[     6.200] (II) intel(0): switch to mode 1680x1050@60.0 on HDMI1 using pipe 1, position (0, 0), rotation normal, reflection none
[     6.200] (II) intel(0): Setting screen physical size to 444 x 277
[     6.291] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[     6.300] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     6.300] (II) LoadModule: "evdev"
[     6.300] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[     6.305] (II) Module evdev: vendor="X.Org Foundation"
[     6.305] 	compiled for 1.18.1, module version = 2.10.1
[     6.305] 	Module class: X.Org XInput Driver
[     6.305] 	ABI class: X.Org XInput driver, version 22.1
[     6.305] (II) Using input driver 'evdev' for 'Power Button'
[     6.305] (**) Power Button: always reports core events
[     6.305] (**) evdev: Power Button: Device: "/dev/input/event3"
[     6.305] (--) evdev: Power Button: Vendor 0 Product 0x1
[     6.305] (--) evdev: Power Button: Found keys
[     6.305] (II) evdev: Power Button: Configuring as keyboard
[     6.305] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[     6.305] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     6.305] (**) Option "xkb_rules" "evdev"
[     6.305] (**) Option "xkb_model" "pc105"
[     6.305] (**) Option "xkb_layout" "fr"
[     6.305] (**) Option "xkb_variant" "latin9"
[     6.396] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[     6.396] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[     6.396] (II) Using input driver 'evdev' for 'Video Bus'
[     6.396] (**) Video Bus: always reports core events
[     6.396] (**) evdev: Video Bus: Device: "/dev/input/event5"
[     6.396] (--) evdev: Video Bus: Vendor 0 Product 0x6
[     6.396] (--) evdev: Video Bus: Found keys
[     6.396] (II) evdev: Video Bus: Configuring as keyboard
[     6.396] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11/event5"
[     6.396] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[     6.396] (**) Option "xkb_rules" "evdev"
[     6.396] (**) Option "xkb_model" "pc105"
[     6.396] (**) Option "xkb_layout" "fr"
[     6.396] (**) Option "xkb_variant" "latin9"
[     6.397] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[     6.397] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     6.397] (II) Using input driver 'evdev' for 'Power Button'
[     6.397] (**) Power Button: always reports core events
[     6.397] (**) evdev: Power Button: Device: "/dev/input/event0"
[     6.397] (--) evdev: Power Button: Vendor 0 Product 0x1
[     6.397] (--) evdev: Power Button: Found keys
[     6.397] (II) evdev: Power Button: Configuring as keyboard
[     6.397] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[     6.397] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[     6.397] (**) Option "xkb_rules" "evdev"
[     6.397] (**) Option "xkb_model" "pc105"
[     6.397] (**) Option "xkb_layout" "fr"
[     6.397] (**) Option "xkb_variant" "latin9"
[     6.398] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[     6.398] (II) No input driver specified, ignoring this device.
[     6.398] (II) This device may have been added with another device file.
[     6.398] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[     6.398] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[     6.398] (II) Using input driver 'evdev' for 'Sleep Button'
[     6.398] (**) Sleep Button: always reports core events
[     6.398] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[     6.398] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[     6.398] (--) evdev: Sleep Button: Found keys
[     6.398] (II) evdev: Sleep Button: Configuring as keyboard
[     6.398] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[     6.398] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[     6.398] (**) Option "xkb_rules" "evdev"
[     6.398] (**) Option "xkb_model" "pc105"
[     6.398] (**) Option "xkb_layout" "fr"
[     6.398] (**) Option "xkb_variant" "latin9"
[     6.399] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event14)
[     6.399] (II) No input driver specified, ignoring this device.
[     6.399] (II) This device may have been added with another device file.
[     6.408] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event7)
[     6.408] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[     6.408] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[     6.408] (**) Logitech USB Optical Mouse: always reports core events
[     6.408] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event7"
[     6.464] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc077
[     6.464] (--) evdev: Logitech USB Optical Mouse: Found 12 mouse buttons
[     6.464] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
[     6.464] (--) evdev: Logitech USB Optical Mouse: Found relative axes
[     6.464] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
[     6.464] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
[     6.464] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
[     6.464] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[     6.464] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[     6.464] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/0003:046D:C077.0001/input/input14/event7"
[     6.464] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 10)
[     6.464] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
[     6.464] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[     6.464] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[     6.464] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[     6.464] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[     6.465] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse1)
[     6.465] (II) No input driver specified, ignoring this device.
[     6.465] (II) This device may have been added with another device file.
[     6.465] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event8)
[     6.465] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[     6.465] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[     6.465] (**) Logitech USB Keyboard: always reports core events
[     6.465] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event8"
[     6.465] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc31c
[     6.465] (--) evdev: Logitech USB Keyboard: Found keys
[     6.465] (II) evdev: Logitech USB Keyboard: Configuring as keyboard
[     6.465] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:046D:C31C.0002/input/input15/event8"
[     6.465] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 11)
[     6.465] (**) Option "xkb_rules" "evdev"
[     6.465] (**) Option "xkb_model" "pc105"
[     6.465] (**) Option "xkb_layout" "fr"
[     6.465] (**) Option "xkb_variant" "latin9"
[     6.466] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event9)
[     6.466] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[     6.466] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[     6.466] (**) Logitech USB Keyboard: always reports core events
[     6.466] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event9"
[     6.466] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc31c
[     6.466] (--) evdev: Logitech USB Keyboard: Found absolute axes
[     6.466] (II) evdev: Logitech USB Keyboard: Forcing absolute x/y axes to exist.
[     6.467] (--) evdev: Logitech USB Keyboard: Found keys
[     6.467] (II) evdev: Logitech USB Keyboard: Forcing relative x/y axes to exist.
[     6.467] (II) evdev: Logitech USB Keyboard: Configuring as mouse
[     6.467] (II) evdev: Logitech USB Keyboard: Configuring as keyboard
[     6.467] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.1/0003:046D:C31C.0003/input/input16/event9"
[     6.467] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 12)
[     6.467] (**) Option "xkb_rules" "evdev"
[     6.467] (**) Option "xkb_model" "pc105"
[     6.467] (**) Option "xkb_layout" "fr"
[     6.467] (**) Option "xkb_variant" "latin9"
[     6.467] (II) evdev: Logitech USB Keyboard: initialized for absolute axes.
[     6.467] (**) Logitech USB Keyboard: (accel) keeping acceleration scheme 1
[     6.467] (**) Logitech USB Keyboard: (accel) acceleration profile 0
[     6.467] (**) Logitech USB Keyboard: (accel) acceleration factor: 2.000
[     6.467] (**) Logitech USB Keyboard: (accel) acceleration threshold: 4
[     6.467] (II) config/udev: Adding input device BisonCam, NB Pro (/dev/input/event13)
[     6.467] (**) BisonCam, NB Pro: Applying InputClass "evdev keyboard catchall"
[     6.468] (II) Using input driver 'evdev' for 'BisonCam, NB Pro'
[     6.468] (**) BisonCam, NB Pro: always reports core events
[     6.468] (**) evdev: BisonCam, NB Pro: Device: "/dev/input/event13"
[     6.468] (--) evdev: BisonCam, NB Pro: Vendor 0x5986 Product 0x536
[     6.468] (--) evdev: BisonCam, NB Pro: Found keys
[     6.468] (II) evdev: BisonCam, NB Pro: Configuring as keyboard
[     6.468] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.0/input/input20/event13"
[     6.468] (II) XINPUT: Adding extended input device "BisonCam, NB Pro" (type: KEYBOARD, id 13)
[     6.468] (**) Option "xkb_rules" "evdev"
[     6.468] (**) Option "xkb_model" "pc105"
[     6.468] (**) Option "xkb_layout" "fr"
[     6.468] (**) Option "xkb_variant" "latin9"
[     6.468] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event11)
[     6.468] (II) No input driver specified, ignoring this device.
[     6.468] (II) This device may have been added with another device file.
[     6.469] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event12)
[     6.469] (II) No input driver specified, ignoring this device.
[     6.469] (II) This device may have been added with another device file.
[     6.469] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[     6.469] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[     6.469] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[     6.469] (**) AT Translated Set 2 keyboard: always reports core events
[     6.469] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[     6.469] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[     6.469] (--) evdev: AT Translated Set 2 keyboard: Found keys
[     6.469] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[     6.469] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[     6.469] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[     6.469] (**) Option "xkb_rules" "evdev"
[     6.469] (**) Option "xkb_model" "pc105"
[     6.469] (**) Option "xkb_layout" "fr"
[     6.469] (**) Option "xkb_variant" "latin9"
[     6.470] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event6)
[     6.470] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[     6.470] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchscreen catchall"
[     6.470] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[     6.470] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[     6.470] (II) LoadModule: "synaptics"
[     6.470] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[     6.471] (II) Module synaptics: vendor="X.Org Foundation"
[     6.471] 	compiled for 1.18.1, module version = 1.8.2
[     6.471] 	Module class: X.Org XInput Driver
[     6.471] 	ABI class: X.Org XInput driver, version 22.1
[     6.471] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[     6.471] (**) ETPS/2 Elantech Touchpad: always reports core events
[     6.471] (**) Option "Device" "/dev/input/event6"
[     6.524] (II) synaptics: ETPS/2 Elantech Touchpad: ignoring touch events for semi-multitouch device
[     6.524] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 2940 (res 31)
[     6.524] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 1400 (res 31)
[     6.524] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[     6.524] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[     6.524] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple
[     6.524] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[     6.524] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[     6.524] (**) ETPS/2 Elantech Touchpad: always reports core events
[     6.548] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input10/event6"
[     6.548] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 15)
[     6.548] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[     6.548] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[     6.548] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.061
[     6.548] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[     6.548] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[     6.548] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[     6.548] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[     6.548] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[     6.548] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[     6.548] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[     6.551] (II) config/udev: Adding input device Clevo Airplane-Mode Hotkey (/dev/input/event10)
[     6.551] (**) Clevo Airplane-Mode Hotkey: Applying InputClass "evdev keyboard catchall"
[     6.551] (II) Using input driver 'evdev' for 'Clevo Airplane-Mode Hotkey'
[     6.551] (**) Clevo Airplane-Mode Hotkey: always reports core events
[     6.551] (**) evdev: Clevo Airplane-Mode Hotkey: Device: "/dev/input/event10"
[     6.551] (--) evdev: Clevo Airplane-Mode Hotkey: Vendor 0 Product 0
[     6.551] (--) evdev: Clevo Airplane-Mode Hotkey: Found keys
[     6.551] (II) evdev: Clevo Airplane-Mode Hotkey: Configuring as keyboard
[     6.551] (**) Option "config_info" "udev:/sys/devices/platform/tuxedo_wmi/input/input17/event10"
[     6.551] (II) XINPUT: Adding extended input device "Clevo Airplane-Mode Hotkey" (type: KEYBOARD, id 16)
[     6.551] (**) Option "xkb_rules" "evdev"
[     6.551] (**) Option "xkb_model" "pc105"
[     6.551] (**) Option "xkb_layout" "fr"
[     6.551] (**) Option "xkb_variant" "latin9"
[     8.130] (II) intel(0): EDID vendor "AUO", prod id 12350
[     8.130] (II) intel(0): Printing DDC gathered Modelines:
[     8.130] (II) intel(0): Modeline "1600x900"x0.0  115.20  1600 1664 1706 2000  900 903 906 960 -hsync -vsync (57.6 kHz eP)
[     8.749] (II) intel(0): resizing framebuffer to 3280x1050
[     8.783] (II) intel(0): switch to mode 1680x1050@59.9 on HDMI1 using pipe 1, position (1600, 0), rotation normal, reflection none
[    65.138] (II) intel(0): resizing framebuffer to 1152x864
[    65.139] (II) intel(0): switch to mode 1152x864@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[    65.943] (II) intel(0): switch to mode 1152x864@75.0 on HDMI1 using pipe 1, position (0, 0), rotation normal, reflection none
[   176.449] (II) intel(0): resizing framebuffer to 3280x1050
[   176.479] (II) intel(0): switch to mode 1600x900@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[   177.650] (II) intel(0): switch to mode 1680x1050@59.9 on HDMI1 using pipe 1, position (1600, 0), rotation normal, reflection none
[   180.737] (II) intel(0): resizing framebuffer to 1680x1050
[   180.748] (II) intel(0): switch to mode 1680x1050@59.9 on HDMI1 using pipe 0, position (0, 0), rotation normal, reflection none
[   543.650] (II) config/udev: removing device Logitech USB Keyboard
[   543.660] (II) evdev: Logitech USB Keyboard: Close
[   543.660] (II) UnloadModule: "evdev"
[   543.686] (II) config/udev: removing device Logitech USB Keyboard
[   543.704] (II) evdev: Logitech USB Keyboard: Close
[   543.704] (II) UnloadModule: "evdev"
[   544.268] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event8)
[   544.268] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[   544.268] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[   544.268] (**) Logitech USB Keyboard: always reports core events
[   544.268] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event8"
[   544.268] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc31c
[   544.268] (--) evdev: Logitech USB Keyboard: Found keys
[   544.268] (II) evdev: Logitech USB Keyboard: Configuring as keyboard
[   544.268] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:046D:C31C.0004/input/input22/event8"
[   544.268] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 11)
[   544.268] (**) Option "xkb_rules" "evdev"
[   544.268] (**) Option "xkb_model" "pc105"
[   544.268] (**) Option "xkb_layout" "fr"
[   544.268] (**) Option "xkb_variant" "latin9"
[   544.268] (WW) Option "xkb_options" requires a string value
[   544.310] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event9)
[   544.310] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[   544.310] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[   544.310] (**) Logitech USB Keyboard: always reports core events
[   544.310] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event9"
[   544.310] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc31c
[   544.310] (--) evdev: Logitech USB Keyboard: Found absolute axes
[   544.310] (II) evdev: Logitech USB Keyboard: Forcing absolute x/y axes to exist.
[   544.310] (--) evdev: Logitech USB Keyboard: Found keys
[   544.310] (II) evdev: Logitech USB Keyboard: Forcing relative x/y axes to exist.
[   544.310] (II) evdev: Logitech USB Keyboard: Configuring as mouse
[   544.310] (II) evdev: Logitech USB Keyboard: Configuring as keyboard
[   544.310] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.1/0003:046D:C31C.0005/input/input23/event9"
[   544.310] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 12)
[   544.310] (**) Option "xkb_rules" "evdev"
[   544.310] (**) Option "xkb_model" "pc105"
[   544.310] (**) Option "xkb_layout" "fr"
[   544.310] (**) Option "xkb_variant" "latin9"
[   544.310] (WW) Option "xkb_options" requires a string value
[   544.310] (II) evdev: Logitech USB Keyboard: initialized for absolute axes.
[   544.311] (**) Logitech USB Keyboard: (accel) keeping acceleration scheme 1
[   544.311] (**) Logitech USB Keyboard: (accel) acceleration profile 0
[   544.311] (**) Logitech USB Keyboard: (accel) acceleration factor: 2.000
[   544.311] (**) Logitech USB Keyboard: (accel) acceleration threshold: 4
[   545.166] (II) config/udev: removing device Logitech USB Optical Mouse
[   545.176] (II) evdev: Logitech USB Optical Mouse: Close
[   545.176] (II) UnloadModule: "evdev"
[   545.338] (II) config/udev: removing device Logitech USB Keyboard
[   545.348] (II) evdev: Logitech USB Keyboard: Close
[   545.349] (II) UnloadModule: "evdev"
[   545.378] (II) config/udev: removing device Logitech USB Keyboard
[   545.400] (II) evdev: Logitech USB Keyboard: Close
[   545.400] (II) UnloadModule: "evdev"
[   547.926] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event7)
[   547.926] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[   547.926] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[   547.926] (**) Logitech USB Keyboard: always reports core events
[   547.926] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event7"
[   547.926] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc31c
[   547.926] (--) evdev: Logitech USB Keyboard: Found keys
[   547.926] (II) evdev: Logitech USB Keyboard: Configuring as keyboard
[   547.926] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:046D:C31C.0006/input/input24/event7"
[   547.926] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 10)
[   547.926] (**) Option "xkb_rules" "evdev"
[   547.926] (**) Option "xkb_model" "pc105"
[   547.926] (**) Option "xkb_layout" "fr"
[   547.926] (**) Option "xkb_variant" "latin9"
[   547.926] (WW) Option "xkb_options" requires a string value
[   547.970] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event8)
[   547.970] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[   547.970] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[   547.970] (**) Logitech USB Keyboard: always reports core events
[   547.970] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event8"
[   547.970] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc31c
[   547.970] (--) evdev: Logitech USB Keyboard: Found absolute axes
[   547.970] (II) evdev: Logitech USB Keyboard: Forcing absolute x/y axes to exist.
[   547.970] (--) evdev: Logitech USB Keyboard: Found keys
[   547.970] (II) evdev: Logitech USB Keyboard: Forcing relative x/y axes to exist.
[   547.970] (II) evdev: Logitech USB Keyboard: Configuring as mouse
[   547.970] (II) evdev: Logitech USB Keyboard: Configuring as keyboard
[   547.970] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.1/0003:046D:C31C.0007/input/input25/event8"
[   547.970] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 11)
[   547.970] (**) Option "xkb_rules" "evdev"
[   547.970] (**) Option "xkb_model" "pc105"
[   547.970] (**) Option "xkb_layout" "fr"
[   547.970] (**) Option "xkb_variant" "latin9"
[   547.970] (WW) Option "xkb_options" requires a string value
[   547.970] (II) evdev: Logitech USB Keyboard: initialized for absolute axes.
[   547.971] (**) Logitech USB Keyboard: (accel) keeping acceleration scheme 1
[   547.971] (**) Logitech USB Keyboard: (accel) acceleration profile 0
[   547.971] (**) Logitech USB Keyboard: (accel) acceleration factor: 2.000
[   547.971] (**) Logitech USB Keyboard: (accel) acceleration threshold: 4
[   550.738] (II) config/udev: removing device Logitech USB Keyboard
[   550.754] (II) evdev: Logitech USB Keyboard: Close
[   550.754] (II) UnloadModule: "evdev"
[   550.785] (II) config/udev: removing device Logitech USB Keyboard
[   550.800] (II) evdev: Logitech USB Keyboard: Close
[   550.800] (II) UnloadModule: "evdev"
[   551.973] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event8)
[   551.973] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[   551.973] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[   551.973] (**) Logitech USB Keyboard: always reports core events
[   551.973] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event8"
[   551.973] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc31c
[   551.973] (--) evdev: Logitech USB Keyboard: Found absolute axes
[   551.973] (II) evdev: Logitech USB Keyboard: Forcing absolute x/y axes to exist.
[   551.973] (--) evdev: Logitech USB Keyboard: Found keys
[   551.973] (II) evdev: Logitech USB Keyboard: Forcing relative x/y axes to exist.
[   551.973] (II) evdev: Logitech USB Keyboard: Configuring as mouse
[   551.973] (II) evdev: Logitech USB Keyboard: Configuring as keyboard
[   551.973] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.1/0003:046D:C31C.0009/input/input27/event8"
[   551.973] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 10)
[   551.973] (**) Option "xkb_rules" "evdev"
[   551.973] (**) Option "xkb_model" "pc105"
[   551.973] (**) Option "xkb_layout" "fr"
[   551.973] (**) Option "xkb_variant" "latin9"
[   551.973] (WW) Option "xkb_options" requires a string value
[   551.973] (II) evdev: Logitech USB Keyboard: initialized for absolute axes.
[   551.973] (**) Logitech USB Keyboard: (accel) keeping acceleration scheme 1
[   551.973] (**) Logitech USB Keyboard: (accel) acceleration profile 0
[   551.973] (**) Logitech USB Keyboard: (accel) acceleration factor: 2.000
[   551.973] (**) Logitech USB Keyboard: (accel) acceleration threshold: 4
[   551.981] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event7)
[   551.981] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[   551.981] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[   551.981] (**) Logitech USB Keyboard: always reports core events
[   551.981] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event7"
[   551.981] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc31c
[   551.981] (--) evdev: Logitech USB Keyboard: Found keys
[   551.981] (II) evdev: Logitech USB Keyboard: Configuring as keyboard
[   551.981] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:046D:C31C.0008/input/input26/event7"
[   551.981] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 11)
[   551.981] (**) Option "xkb_rules" "evdev"
[   551.981] (**) Option "xkb_model" "pc105"
[   551.981] (**) Option "xkb_layout" "fr"
[   551.981] (**) Option "xkb_variant" "latin9"
[   551.981] (WW) Option "xkb_options" requires a string value
[   552.138] (II) config/udev: removing device Logitech USB Keyboard
[   552.153] (II) evdev: Logitech USB Keyboard: Close
[   552.154] (II) UnloadModule: "evdev"
[   552.186] (II) config/udev: removing device Logitech USB Keyboard
[   552.196] (II) evdev: Logitech USB Keyboard: Close
[   552.196] (II) UnloadModule: "evdev"
[   553.240] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event7)
[   553.240] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[   553.240] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[   553.240] (**) Logitech USB Keyboard: always reports core events
[   553.240] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event7"
[   553.240] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc31c
[   553.240] (--) evdev: Logitech USB Keyboard: Found keys
[   553.240] (II) evdev: Logitech USB Keyboard: Configuring as keyboard
[   553.240] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:046D:C31C.000A/input/input28/event7"
[   553.240] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 10)
[   553.240] (**) Option "xkb_rules" "evdev"
[   553.240] (**) Option "xkb_model" "pc105"
[   553.240] (**) Option "xkb_layout" "fr"
[   553.240] (**) Option "xkb_variant" "latin9"
[   553.240] (WW) Option "xkb_options" requires a string value
[   553.286] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event8)
[   553.286] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[   553.286] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[   553.286] (**) Logitech USB Keyboard: always reports core events
[   553.286] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event8"
[   553.286] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc31c
[   553.286] (--) evdev: Logitech USB Keyboard: Found absolute axes
[   553.286] (II) evdev: Logitech USB Keyboard: Forcing absolute x/y axes to exist.
[   553.286] (--) evdev: Logitech USB Keyboard: Found keys
[   553.286] (II) evdev: Logitech USB Keyboard: Forcing relative x/y axes to exist.
[   553.286] (II) evdev: Logitech USB Keyboard: Configuring as mouse
[   553.286] (II) evdev: Logitech USB Keyboard: Configuring as keyboard
[   553.286] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.1/0003:046D:C31C.000B/input/input29/event8"
[   553.286] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 11)
[   553.286] (**) Option "xkb_rules" "evdev"
[   553.286] (**) Option "xkb_model" "pc105"
[   553.286] (**) Option "xkb_layout" "fr"
[   553.286] (**) Option "xkb_variant" "latin9"
[   553.286] (WW) Option "xkb_options" requires a string value
[   553.287] (II) evdev: Logitech USB Keyboard: initialized for absolute axes.
[   553.287] (**) Logitech USB Keyboard: (accel) keeping acceleration scheme 1
[   553.287] (**) Logitech USB Keyboard: (accel) acceleration profile 0
[   553.287] (**) Logitech USB Keyboard: (accel) acceleration factor: 2.000
[   553.287] (**) Logitech USB Keyboard: (accel) acceleration threshold: 4
[   588.522] (II) config/udev: removing device Logitech USB Keyboard
[   588.532] (II) evdev: Logitech USB Keyboard: Close
[   588.532] (II) UnloadModule: "evdev"
[   588.573] (II) config/udev: removing device Logitech USB Keyboard
[   588.592] (II) evdev: Logitech USB Keyboard: Close
[   588.592] (II) UnloadModule: "evdev"
[   593.386] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event7)
[   593.386] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[   593.386] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[   593.386] (**) Logitech USB Keyboard: always reports core events
[   593.386] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event7"
[   593.386] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc31c
[   593.386] (--) evdev: Logitech USB Keyboard: Found keys
[   593.386] (II) evdev: Logitech USB Keyboard: Configuring as keyboard
[   593.386] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:046D:C31C.000C/input/input30/event7"
[   593.386] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 10)
[   593.386] (**) Option "xkb_rules" "evdev"
[   593.386] (**) Option "xkb_model" "pc105"
[   593.386] (**) Option "xkb_layout" "fr"
[   593.386] (**) Option "xkb_variant" "latin9"
[   593.386] (WW) Option "xkb_options" requires a string value
[   593.411] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event8)
[   593.411] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[   593.411] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[   593.412] (**) Logitech USB Keyboard: always reports core events
[   593.412] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event8"
[   593.412] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc31c
[   593.412] (--) evdev: Logitech USB Keyboard: Found absolute axes
[   593.412] (II) evdev: Logitech USB Keyboard: Forcing absolute x/y axes to exist.
[   593.412] (--) evdev: Logitech USB Keyboard: Found keys
[   593.412] (II) evdev: Logitech USB Keyboard: Forcing relative x/y axes to exist.
[   593.412] (II) evdev: Logitech USB Keyboard: Configuring as mouse
[   593.412] (II) evdev: Logitech USB Keyboard: Configuring as keyboard
[   593.412] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.1/0003:046D:C31C.000D/input/input31/event8"
[   593.412] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 11)
[   593.412] (**) Option "xkb_rules" "evdev"
[   593.412] (**) Option "xkb_model" "pc105"
[   593.412] (**) Option "xkb_layout" "fr"
[   593.412] (**) Option "xkb_variant" "latin9"
[   593.412] (WW) Option "xkb_options" requires a string value
[   593.412] (II) evdev: Logitech USB Keyboard: initialized for absolute axes.
[   593.413] (**) Logitech USB Keyboard: (accel) keeping acceleration scheme 1
[   593.413] (**) Logitech USB Keyboard: (accel) acceleration profile 0
[   593.413] (**) Logitech USB Keyboard: (accel) acceleration factor: 2.000
[   593.413] (**) Logitech USB Keyboard: (accel) acceleration threshold: 4
[   594.511] (II) config/udev: removing device Logitech USB Keyboard
[   594.521] (II) evdev: Logitech USB Keyboard: Close
[   594.521] (II) UnloadModule: "evdev"
[   594.562] (II) config/udev: removing device Logitech USB Keyboard
[   594.573] (II) evdev: Logitech USB Keyboard: Close
[   594.574] (II) UnloadModule: "evdev"
[   595.118] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event7)
[   595.118] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[   595.118] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[   595.118] (**) Logitech USB Keyboard: always reports core events
[   595.118] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event7"
[   595.118] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc31c
[   595.118] (--) evdev: Logitech USB Keyboard: Found keys
[   595.118] (II) evdev: Logitech USB Keyboard: Configuring as keyboard
[   595.118] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:046D:C31C.000E/input/input32/event7"
[   595.118] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 10)
[   595.118] (**) Option "xkb_rules" "evdev"
[   595.118] (**) Option "xkb_model" "pc105"
[   595.118] (**) Option "xkb_layout" "fr"
[   595.118] (**) Option "xkb_variant" "latin9"
[   595.118] (WW) Option "xkb_options" requires a string value
[   595.159] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event8)
[   595.159] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[   595.159] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[   595.159] (**) Logitech USB Keyboard: always reports core events
[   595.159] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event8"
[   595.159] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc31c
[   595.159] (--) evdev: Logitech USB Keyboard: Found absolute axes
[   595.159] (II) evdev: Logitech USB Keyboard: Forcing absolute x/y axes to exist.
[   595.160] (--) evdev: Logitech USB Keyboard: Found keys
[   595.160] (II) evdev: Logitech USB Keyboard: Forcing relative x/y axes to exist.
[   595.160] (II) evdev: Logitech USB Keyboard: Configuring as mouse
[   595.160] (II) evdev: Logitech USB Keyboard: Configuring as keyboard
[   595.160] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.1/0003:046D:C31C.000F/input/input33/event8"
[   595.160] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 11)
[   595.160] (**) Option "xkb_rules" "evdev"
[   595.160] (**) Option "xkb_model" "pc105"
[   595.160] (**) Option "xkb_layout" "fr"
[   595.160] (**) Option "xkb_variant" "latin9"
[   595.160] (WW) Option "xkb_options" requires a string value
[   595.160] (II) evdev: Logitech USB Keyboard: initialized for absolute axes.
[   595.160] (**) Logitech USB Keyboard: (accel) keeping acceleration scheme 1
[   595.160] (**) Logitech USB Keyboard: (accel) acceleration profile 0
[   595.160] (**) Logitech USB Keyboard: (accel) acceleration factor: 2.000
[   595.160] (**) Logitech USB Keyboard: (accel) acceleration threshold: 4
[   595.169] (II) config/udev: removing device Logitech USB Keyboard
[   595.180] (II) evdev: Logitech USB Keyboard: Close
[   595.180] (II) UnloadModule: "evdev"
[   595.219] (II) config/udev: removing device Logitech USB Keyboard
[   595.228] (II) evdev: Logitech USB Keyboard: Close
[   595.228] (II) UnloadModule: "evdev"
[   597.574] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse1)
[   597.574] (II) No input driver specified, ignoring this device.
[   597.574] (II) This device may have been added with another device file.
[   597.612] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event8)
[   597.612] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[   597.612] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[   597.612] (**) Logitech USB Keyboard: always reports core events
[   597.612] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event8"
[   597.612] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc31c
[   597.612] (--) evdev: Logitech USB Keyboard: Found keys
[   597.612] (II) evdev: Logitech USB Keyboard: Configuring as keyboard
[   597.612] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:046D:C31C.0011/input/input35/event8"
[   597.612] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 10)
[   597.612] (**) Option "xkb_rules" "evdev"
[   597.612] (**) Option "xkb_model" "pc105"
[   597.612] (**) Option "xkb_layout" "fr"
[   597.612] (**) Option "xkb_variant" "latin9"
[   597.612] (WW) Option "xkb_options" requires a string value
[   597.654] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event9)
[   597.654] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[   597.654] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[   597.654] (**) Logitech USB Keyboard: always reports core events
[   597.654] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event9"
[   597.654] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc31c
[   597.654] (--) evdev: Logitech USB Keyboard: Found absolute axes
[   597.654] (II) evdev: Logitech USB Keyboard: Forcing absolute x/y axes to exist.
[   597.654] (--) evdev: Logitech USB Keyboard: Found keys
[   597.654] (II) evdev: Logitech USB Keyboard: Forcing relative x/y axes to exist.
[   597.654] (II) evdev: Logitech USB Keyboard: Configuring as mouse
[   597.654] (II) evdev: Logitech USB Keyboard: Configuring as keyboard
[   597.654] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.1/0003:046D:C31C.0012/input/input36/event9"
[   597.654] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 11)
[   597.654] (**) Option "xkb_rules" "evdev"
[   597.654] (**) Option "xkb_model" "pc105"
[   597.654] (**) Option "xkb_layout" "fr"
[   597.654] (**) Option "xkb_variant" "latin9"
[   597.654] (WW) Option "xkb_options" requires a string value
[   597.654] (II) evdev: Logitech USB Keyboard: initialized for absolute axes.
[   597.655] (**) Logitech USB Keyboard: (accel) keeping acceleration scheme 1
[   597.655] (**) Logitech USB Keyboard: (accel) acceleration profile 0
[   597.655] (**) Logitech USB Keyboard: (accel) acceleration factor: 2.000
[   597.655] (**) Logitech USB Keyboard: (accel) acceleration threshold: 4
[   597.697] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event7)
[   597.697] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[   597.698] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[   597.698] (**) Logitech USB Optical Mouse: always reports core events
[   597.698] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event7"
[   597.752] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc077
[   597.752] (--) evdev: Logitech USB Optical Mouse: Found 12 mouse buttons
[   597.752] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
[   597.752] (--) evdev: Logitech USB Optical Mouse: Found relative axes
[   597.752] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
[   597.752] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
[   597.752] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
[   597.752] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[   597.752] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   597.752] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/0003:046D:C077.0010/input/input34/event7"
[   597.752] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 12)
[   597.752] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
[   597.753] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[   597.753] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[   597.753] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[   597.753] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[  3425.894] (II) config/udev: removing device Logitech USB Keyboard
[  3425.907] (II) evdev: Logitech USB Keyboard: Close
[  3425.907] (II) UnloadModule: "evdev"
[  3425.932] (II) config/udev: removing device Logitech USB Keyboard
[  3425.952] (II) evdev: Logitech USB Keyboard: Close
[  3425.952] (II) UnloadModule: "evdev"

Merci

Hors ligne