DD Externe : "Impossible d'afficher le contenu du dossier"

Josué23 · Le 22/09/2018, à 20:29

Bonjour !
J'ai un DD externe Seagate dans lequel un de dossiers est devenu innacessible avec le message d'erreur suivant :

Impossible d'afficher le contenu du dossier.
Désolé, impossible d'afficher tout le contenu de « ... » : Erreur lors de l'obtention des informations du fichier « /media/josue/Seagate/... » : Erreur d'entrée/sortie

Les autres dossiers de ce disque dur sont accessibles sans problème. Je pense que le problème est arrivé suite à l'ajout d'un fichier vidéo dernièrement, sans savoir comment le confirmer.

J'ai essayé la commande suivante :

josue@josue-ThinkPad-X220 ~ $ sudo smartctl -T permissive -a /dev/sdb
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-112-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

Read Device Identity failed: scsi error unsupported field in scsi command

=== START OF INFORMATION SECTION ===
Device Model:     [No Information Found]
Serial Number:    [No Information Found]
Firmware Version: [No Information Found]
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   [No Information Found]
Local Time is:    Sat Sep 22 20:21:03 2018 CEST
SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 82-83 don't show if SMART supported.
SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 85-87 don't show if SMART is enabled.
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.

Une idée pour moi ?

Merci d'avance !
Josué

PS : Je suis un utilisateur qui se débrouille mais pas informaticien et je ne maîtrise pas le langage des développeurs :-)

inbox · Le 22/09/2018, à 20:48

Salut,

Apparemment, il n'y a pas moyen d'obtenir les données Smart.

Toutefois, les message d'erreur "entrée/sortie" est un mauvais signe. Selon le format de la partition qui cause soucis, tu peux procéder à une vérification du disque.

Est-ce que tu as interrompu la copie du fichier vidéo ?

Disque externe branché, cette commande te retournera le format de la partition :

sudo blkid

Donne aussi le retour de :

dmesg

A+

Dernière modification par inbox (Le 22/09/2018, à 21:02)

Josué23 · Le 22/09/2018, à 21:48

Merci inbox.

Je ne sais pas s'il y a eu un problème au moment de la copie. les enfants sont arrivés à ce moment et je n'avais pas vérifié.

Voici ce que j'obtiens :

josue@josue-ThinkPad-X220 ~ $ sudo blkid
[sudo] Mot de passe de josue : 
/dev/sda1: LABEL="RM-CM-)servM-CM-) au systM-CM-(me" UUID="2ED07252D072206F" TYPE="ntfs" PARTUUID="c166fdaa-01"
/dev/sda2: UUID="D6AE746EAE7448CF" TYPE="ntfs" PARTUUID="c166fdaa-02"
/dev/sda5: UUID="a5313b33-66e0-40e0-b9d3-eb389b7ccd8d" TYPE="ext4" PARTUUID="c166fdaa-05"
/dev/sda6: UUID="b2fc7b5a-5940-4203-be3f-39d789fdc3ba" TYPE="swap" PARTUUID="c166fdaa-06"
/dev/sdb1: LABEL="EFI" UUID="67E3-17ED" TYPE="vfat" PARTLABEL="EFI System Partition" PARTUUID="12a221c4-4b69-413c-81cb-82a79b9e506d"
/dev/sdb2: PARTUUID="f200e06a-13f0-43ba-8490-899c3d5eb155"
/dev/sdb3: LABEL="Seagate" UUID="6C6694C61437565D" TYPE="ntfs" PARTUUID="9d86d9f9-8a1a-4948-b5b7-479fda05f212"

et (là c'est très long) :

josue@josue-ThinkPad-X220 ~ $ dmesg
[    0.000000] microcode: CPU0 microcode updated early to revision 0x2e, date = 2018-04-10
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.0-112-generic (buildd@lgw01-amd64-010) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.5) ) #135-Ubuntu SMP Fri Jan 19 11:48:36 UTC 2018 (Ubuntu 4.4.0-112.135-generic 4.4.98)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-112-generic root=UUID=a5313b33-66e0-40e0-b9d3-eb389b7ccd8d ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] Disabled fast string operations
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000da99efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000da99f000-0x00000000dae9efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dae9f000-0x00000000daf9efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffd20000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021e5fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000021e600000-0x000000021e7fffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: LENOVO 42914CG/42914CG, BIOS 8DET69WW (1.39 ) 07/18/2013
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x21e600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   1 base 000000000 mask F80000000 write-back
[    0.000000]   2 base 080000000 mask FC0000000 write-back
[    0.000000]   3 base 0C0000000 mask FE0000000 write-back
[    0.000000]   4 base 0DC000000 mask FFC000000 uncachable
[    0.000000]   5 base 0DB000000 mask FFF000000 uncachable
[    0.000000]   6 base 100000000 mask F00000000 write-back
[    0.000000]   7 base 200000000 mask FE0000000 write-back
[    0.000000]   8 base 21F000000 mask FFF000000 uncachable
[    0.000000]   9 base 21E800000 mask FFF800000 uncachable
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] BRK [0x02215000, 0x02215fff] PGTABLE
[    0.000000] BRK [0x02216000, 0x02216fff] PGTABLE
[    0.000000] BRK [0x02217000, 0x02217fff] PGTABLE
[    0.000000] BRK [0x02218000, 0x02218fff] PGTABLE
[    0.000000] BRK [0x02219000, 0x02219fff] PGTABLE
[    0.000000] BRK [0x0221a000, 0x0221afff] PGTABLE
[    0.000000] RAMDISK: [mem 0x32f2e000-0x3578efff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F00E0 000024 (v02 LENOVO)
[    0.000000] ACPI: XSDT 0x00000000DAFFE120 0000A4 (v01 LENOVO TP-8D    00001390 PTEC 00000002)
[    0.000000] ACPI: FACP 0x00000000DAFE7000 0000F4 (v04 LENOVO TP-8D    00001390 PTL  00000002)
[    0.000000] ACPI: DSDT 0x00000000DAFEA000 00FA89 (v01 LENOVO TP-8D    00001390 INTL 20061109)
[    0.000000] ACPI: FACS 0x00000000DAF2D000 000040
[    0.000000] ACPI: FACS 0x00000000DAF2D000 000040
[    0.000000] ACPI: SLIC 0x00000000DAFFD000 000176 (v01 LENOVO TP-8D    00001390 PTEC 00000001)
[    0.000000] ACPI: SSDT 0x00000000DAFFC000 000249 (v01 LENOVO TP-SSDT2 00000200 INTL 20061109)
[    0.000000] ACPI: SSDT 0x00000000DAFFB000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL 20061109)
[    0.000000] ACPI: SSDT 0x00000000DAFFA000 0007D1 (v01 LENOVO SataAhci 00001000 INTL 20061109)
[    0.000000] ACPI: HPET 0x00000000DAFE6000 000038 (v01 LENOVO TP-8D    00001390 PTL  00000002)
[    0.000000] ACPI: APIC 0x00000000DAFE5000 000098 (v01 LENOVO TP-8D    00001390 PTL  00000002)
[    0.000000] ACPI: MCFG 0x00000000DAFE4000 00003C (v01 LENOVO TP-8D    00001390 PTL  00000002)
[    0.000000] ACPI: ECDT 0x00000000DAFE3000 000052 (v01 LENOVO TP-8D    00001390 PTL  00000002)
[    0.000000] ACPI: ASF! 0x00000000DAFE9000 0000A5 (v32 LENOVO TP-8D    00001390 PTL  00000002)
[    0.000000] ACPI: TCPA 0x00000000DAFE2000 000032 (v02 PTL    LENOVO   06040000 LNVO 00000001)
[    0.000000] ACPI: SSDT 0x00000000DAFE1000 000AAB (v01 PmRef  Cpu0Ist  00003000 INTL 20061109)
[    0.000000] ACPI: SSDT 0x00000000DAFE0000 000996 (v01 PmRef  CpuPm    00003000 INTL 20061109)
[    0.000000] ACPI: UEFI 0x00000000DAFDF000 00003E (v01 LENOVO TP-8D    00001390 PTL  00000002)
[    0.000000] ACPI: UEFI 0x00000000DAFDE000 000042 (v01 PTL    COMBUF   00000001 PTL  00000001)
[    0.000000] ACPI: UEFI 0x00000000DAFDD000 000292 (v01 LENOVO TP-8D    00001390 PTL  00000002)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000021e5fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x21e5f4000-0x21e5f8fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000021e5fffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020200000-0x000000003fffffff]
[    0.000000]   node   0: [mem 0x0000000040200000-0x00000000da99efff]
[    0.000000]   node   0: [mem 0x00000000dafff000-0x00000000daffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000021e5fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021e5fffff]
[    0.000000] On node 0 totalpages: 2067260
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 156 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 13911 pages used for memmap
[    0.000000]   DMA32 zone: 890272 pages, LIFO batch:31
[    0.000000]   Normal zone: 18328 pages used for memmap
[    0.000000]   Normal zone: 1172992 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics stolen memory at 0xdba00000-0xdf9fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xda99f000-0xdae9efff]
[    0.000000] PM: Registered nosave memory: [mem 0xdae9f000-0xdaf9efff]
[    0.000000] PM: Registered nosave memory: [mem 0xdaf9f000-0xdaffefff]
[    0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdf9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffd1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffd20000-0xffffffff]
[    0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 34 pages/cpu @ffff88021e200000 s99544 r8192 d31528 u262144
[    0.000000] pcpu-alloc: s99544 r8192 d31528 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2034801
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-112-generic root=UUID=a5313b33-66e0-40e0-b9d3-eb389b7ccd8d ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 8010016K/8269040K available (8499K kernel code, 1309K rwdata, 3988K rodata, 1508K init, 1316K bss, 259024K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[    0.000000] NR_IRQS:33024 nr_irqs:488 16
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2791.005 MHz processor
[    0.000032] Calibrating delay loop (skipped), value calculated using timer frequency.. 5582.01 BogoMIPS (lpj=11164020)
[    0.000035] pid_max: default: 32768 minimum: 301
[    0.000040] ACPI: Core revision 20150930
[    0.010537] ACPI: 6 ACPI AML tables successfully acquired and loaded
[    0.010556] Security Framework initialized
[    0.010557] Yama: becoming mindful.
[    0.010571] AppArmor: AppArmor initialized
[    0.011011] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.012413] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.013042] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.013051] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.013236] Initializing cgroup subsys io
[    0.013239] Initializing cgroup subsys memory
[    0.013244] Initializing cgroup subsys devices
[    0.013246] Initializing cgroup subsys freezer
[    0.013248] Initializing cgroup subsys net_cls
[    0.013250] Initializing cgroup subsys perf_event
[    0.013252] Initializing cgroup subsys net_prio
[    0.013254] Initializing cgroup subsys hugetlb
[    0.013256] Initializing cgroup subsys pids
[    0.013273] Disabled fast string operations
[    0.013275] CPU: Physical Processor ID: 0
[    0.013276] CPU: Processor Core ID: 0
[    0.013280] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.013280] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.013282] FEATURE SPEC_CTRL Present
[    0.013283] mce: CPU supports 7 MCE banks
[    0.013293] CPU0: Thermal monitoring enabled (TM1)
[    0.013299] process: using mwait in idle threads
[    0.013302] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.013303] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.013674] Freeing SMP alternatives memory: 32K
[    0.026380] ftrace: allocating 32180 entries in 126 pages
[    0.039384] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.039387] smpboot: Max logical packages: 4
[    0.039459] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.039905] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.079593] TSC deadline timer enabled
[    0.079596] smpboot: CPU0: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[    0.079612] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[    0.079630] ... version:                3
[    0.079631] ... bit width:              48
[    0.079631] ... generic registers:      4
[    0.079632] ... value mask:             0000ffffffffffff
[    0.079633] ... max period:             00007fffffffffff
[    0.079634] ... fixed-purpose events:   3
[    0.079634] ... event mask:             000000070000000f
[    0.080350] x86: Booting SMP configuration:
[    0.080351] .... node  #0, CPUs:      #1
[    0.080654] Disabled fast string operations
[    0.082838] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.082919]  #2
[    0.083602] microcode: CPU2 microcode updated early to revision 0x2e, date = 2018-04-10
[    0.083620] Disabled fast string operations
[    0.085752]  #3
[    0.086035] Disabled fast string operations
[    0.088093] x86: Booted up 1 node, 4 CPUs
[    0.088097] smpboot: Total of 4 processors activated (22328.04 BogoMIPS)
[    0.091484] devtmpfs: initialized
[    0.107398] evm: security.selinux
[    0.107400] evm: security.SMACK64
[    0.107403] evm: security.SMACK64EXEC
[    0.107406] evm: security.SMACK64TRANSMUTE
[    0.107408] evm: security.SMACK64MMAP
[    0.107411] evm: security.ima
[    0.107413] evm: security.capability
[    0.107575] PM: Registering ACPI NVS region [mem 0xdae9f000-0xdaf9efff] (1048576 bytes)
[    0.107755] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.107781] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.107938] pinctrl core: initialized pinctrl subsystem
[    0.108134] RTC time: 14:28:04, date: 09/22/18
[    0.108326] NET: Registered protocol family 16
[    0.124118] cpuidle: using governor ladder
[    0.140131] cpuidle: using governor menu
[    0.140153] PCCT header not found.
[    0.140388] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.140391] ACPI: bus type PCI registered
[    0.140394] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.140713] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.140719] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.140733] PCI: Using configuration type 1 for base access
[    0.140850] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.156878] ACPI: Added _OSI(Module Device)
[    0.156882] ACPI: Added _OSI(Processor Device)
[    0.156885] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.156889] ACPI: Added _OSI(Processor Aggregator Device)
[    0.160629] ACPI : EC: EC description table is found, configuring boot EC
[    0.160644] ACPI : EC: EC started
[    0.172966] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.180718] ACPI: Dynamic OEM Table Load:
[    0.180742] ACPI: SSDT 0xFFFF880214577000 0008C0 (v01 PmRef  Cpu0Cst  00003001 INTL 20061109)
[    0.182315] ACPI: Dynamic OEM Table Load:
[    0.182331] ACPI: SSDT 0xFFFF8802146D3000 000303 (v01 PmRef  ApIst    00003000 INTL 20061109)
[    0.183700] ACPI: Dynamic OEM Table Load:
[    0.183713] ACPI: SSDT 0xFFFF8802146C3600 000119 (v01 PmRef  ApCst    00003000 INTL 20061109)
[    0.186287] ACPI: Interpreter enabled
[    0.186339] ACPI: (supports S0 S3 S4 S5)
[    0.186342] ACPI: Using IOAPIC for interrupt routing
[    0.186390] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.193423] ACPI: Power Resource [PUBS] (on)
[    0.194530] acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1)
[    0.197424] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 2)
[    0.201578] acpi IBM0079:00: ACPI dock station (docks/bays count: 3)
[    0.202696] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[    0.202913] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[    0.203128] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 9 10 11)
[    0.203343] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11)
[    0.203561] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11)
[    0.203724] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[    0.203940] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
[    0.204155] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 9 10 11)
[    0.204381] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.204390] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.204861] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
[    0.205092] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[    0.205099] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
[    0.205105] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
[    0.205110] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[    0.205136] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.205508] PCI host bridge to bus 0000:00
[    0.205514] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.205519] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.205525] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.205531] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfebfffff window]
[    0.205536] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff window]
[    0.205542] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.205554] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    0.205717] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000
[    0.205735] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
[    0.205746] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.205754] pci 0000:00:02.0: reg 0x20: [io  0x5000-0x503f]
[    0.205954] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.205993] pci 0000:00:16.0: reg 0x10: [mem 0xf2625000-0xf262500f 64bit]
[    0.206070] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.206225] pci 0000:00:16.3: [8086:1c3d] type 00 class 0x070002
[    0.206257] pci 0000:00:16.3: reg 0x10: [io  0x50b0-0x50b7]
[    0.206270] pci 0000:00:16.3: reg 0x14: [mem 0xf262c000-0xf262cfff]
[    0.206484] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[    0.206516] pci 0000:00:19.0: reg 0x10: [mem 0xf2600000-0xf261ffff]
[    0.206529] pci 0000:00:19.0: reg 0x14: [mem 0xf262b000-0xf262bfff]
[    0.206542] pci 0000:00:19.0: reg 0x18: [io  0x5080-0x509f]
[    0.206606] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.206681] pci 0000:00:19.0: System wakeup disabled by ACPI
[    0.206773] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.206807] pci 0000:00:1a.0: reg 0x10: [mem 0xf262a000-0xf262a3ff]
[    0.206894] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.206974] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.207070] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.207103] pci 0000:00:1b.0: reg 0x10: [mem 0xf2620000-0xf2623fff 64bit]
[    0.207179] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.207270] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.207367] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.207494] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.207668] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[    0.207802] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.207980] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[    0.208117] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.208206] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.208302] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[    0.208394] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.208556] pci 0000:00:1c.6: [8086:1c1c] type 01 class 0x060400
[    0.208648] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[    0.208728] pci 0000:00:1c.6: System wakeup disabled by ACPI
[    0.208822] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.208856] pci 0000:00:1d.0: reg 0x10: [mem 0xf2629000-0xf26293ff]
[    0.208942] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.209019] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.209110] pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100
[    0.209364] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[    0.209395] pci 0000:00:1f.2: reg 0x10: [io  0x50a8-0x50af]
[    0.209407] pci 0000:00:1f.2: reg 0x14: [io  0x50bc-0x50bf]
[    0.209419] pci 0000:00:1f.2: reg 0x18: [io  0x50a0-0x50a7]
[    0.209431] pci 0000:00:1f.2: reg 0x1c: [io  0x50b8-0x50bb]
[    0.209443] pci 0000:00:1f.2: reg 0x20: [io  0x5060-0x507f]
[    0.209455] pci 0000:00:1f.2: reg 0x24: [mem 0xf2628000-0xf26287ff]
[    0.209499] pci 0000:00:1f.2: PME# supported from D3hot
[    0.209654] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.209677] pci 0000:00:1f.3: reg 0x10: [mem 0xf2624000-0xf26240ff 64bit]
[    0.209702] pci 0000:00:1f.3: reg 0x20: [io  0xefa0-0xefbf]
[    0.209951] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.210198] pci 0000:03:00.0: [8086:0085] type 00 class 0x028000
[    0.210493] pci 0000:03:00.0: reg 0x10: [mem 0xf2500000-0xf2501fff 64bit]
[    0.211135] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.216438] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.216451] pci 0000:00:1c.1:   bridge window [mem 0xf2500000-0xf25fffff]
[    0.216598] acpiphp: Slot [1] registered
[    0.216609] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[    0.216618] pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
[    0.216627] pci 0000:00:1c.3:   bridge window [mem 0xf1d00000-0xf24fffff]
[    0.216639] pci 0000:00:1c.3:   bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
[    0.216888] pci 0000:0d:00.0: [1180:e823] type 00 class 0x088001
[    0.216945] pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[    0.216981] pci 0000:0d:00.0: reg 0x10: [mem 0xf1500000-0xf15000ff]
[    0.217263] pci 0000:0d:00.0: supports D1 D2
[    0.217268] pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.224376] pci 0000:00:1c.4: PCI bridge to [bus 0d]
[    0.224399] pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
[    0.224424] pci 0000:00:1c.4:   bridge window [mem 0xf1500000-0xf1cfffff]
[    0.224435] pci 0000:00:1c.4:   bridge window [mem 0xf0c00000-0xf13fffff 64bit pref]
[    0.224532] pci 0000:0e:00.0: [1033:0194] type 00 class 0x0c0330
[    0.224590] pci 0000:0e:00.0: reg 0x10: [mem 0xf1400000-0xf1401fff 64bit]
[    0.224729] pci 0000:0e:00.0: PME# supported from D0 D3hot D3cold
[    0.232339] pci 0000:00:1c.6: PCI bridge to [bus 0e]
[    0.232367] pci 0000:00:1c.6:   bridge window [mem 0xf1400000-0xf14fffff]
[    0.234574] ACPI: Enabled 4 GPEs in block 00 to 3F
[    0.234752] ACPI : EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[    0.234934] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.234939] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.234946] vgaarb: loaded
[    0.234949] vgaarb: bridge control possible 0000:00:02.0
[    0.235517] SCSI subsystem initialized
[    0.235573] libata version 3.00 loaded.
[    0.235623] ACPI: bus type USB registered
[    0.235661] usbcore: registered new interface driver usbfs
[    0.235684] usbcore: registered new interface driver hub
[    0.235717] usbcore: registered new device driver usb
[    0.235986] PCI: Using ACPI for IRQ routing
[    0.237756] PCI: pci_cache_line_size set to 64 bytes
[    0.238171] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.238175] e820: reserve RAM buffer [mem 0xda99f000-0xdbffffff]
[    0.238179] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
[    0.238183] e820: reserve RAM buffer [mem 0x21e600000-0x21fffffff]
[    0.238399] NetLabel: Initializing
[    0.238402] NetLabel:  domain hash size = 128
[    0.238405] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.238426] NetLabel:  unlabeled traffic allowed by default
[    0.238605] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.238617] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.240638] amd_nb: Cannot enumerate AMD northbridges
[    0.240657] clocksource: Switched to clocksource hpet
[    0.255091] AppArmor: AppArmor Filesystem Enabled
[    0.255201] pnp: PnP ACPI init
[    0.256221] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.256228] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[    0.256233] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[    0.256239] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[    0.256245] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
[    0.256250] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
[    0.256256] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
[    0.256262] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
[    0.256267] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
[    0.256273] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[    0.256279] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[    0.256285] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[    0.256291] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[    0.256296] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[    0.256302] system 00:00: [mem 0x00100000-0xdf9fffff] could not be reserved
[    0.256308] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[    0.256314] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
[    0.256322] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.256586] system 00:01: [io  0x0400-0x047f] could not be reserved
[    0.256592] system 00:01: [io  0x0500-0x057f] has been reserved
[    0.256597] system 00:01: [io  0x0800-0x080f] has been reserved
[    0.256603] system 00:01: [io  0x15e0-0x15ef] has been reserved
[    0.256609] system 00:01: [io  0x1600-0x167f] has been reserved
[    0.256615] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.256621] system 00:01: [mem 0x00000000-0x00000fff] could not be reserved
[    0.256627] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.256633] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
[    0.256639] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.256645] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.256651] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
[    0.256667] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.256787] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.256844] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.256901] pnp 00:04: Plug and Play ACPI device, IDs LEN0020 PNP0f13 (active)
[    0.257008] pnp 00:05: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
[    0.257978] pnp: PnP ACPI: found 6 devices
[    0.266479] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.266507] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    0.266515] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    0.266521] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
[    0.266570] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.266577] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.266584] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.266590] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.266596] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.266603] pci 0000:00:1c.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.266611] pci 0000:00:1c.0: BAR 14: assigned [mem 0xdfa00000-0xdfbfffff]
[    0.266623] pci 0000:00:1c.0: BAR 15: assigned [mem 0xdfc00000-0xdfdfffff 64bit pref]
[    0.266630] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.266636] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.266643] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.266653] pci 0000:00:1c.0:   bridge window [mem 0xdfa00000-0xdfbfffff]
[    0.266662] pci 0000:00:1c.0:   bridge window [mem 0xdfc00000-0xdfdfffff 64bit pref]
[    0.266674] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.266685] pci 0000:00:1c.1:   bridge window [mem 0xf2500000-0xf25fffff]
[    0.266700] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[    0.266707] pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
[    0.266718] pci 0000:00:1c.3:   bridge window [mem 0xf1d00000-0xf24fffff]
[    0.266727] pci 0000:00:1c.3:   bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
[    0.266739] pci 0000:00:1c.4: PCI bridge to [bus 0d]
[    0.266746] pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
[    0.266755] pci 0000:00:1c.4:   bridge window [mem 0xf1500000-0xf1cfffff]
[    0.266763] pci 0000:00:1c.4:   bridge window [mem 0xf0c00000-0xf13fffff 64bit pref]
[    0.266773] pci 0000:00:1c.6: PCI bridge to [bus 0e]
[    0.266782] pci 0000:00:1c.6:   bridge window [mem 0xf1400000-0xf14fffff]
[    0.266796] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.266801] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.266806] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.266812] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfebfffff window]
[    0.266817] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff window]
[    0.266823] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.266828] pci_bus 0000:02: resource 1 [mem 0xdfa00000-0xdfbfffff]
[    0.266833] pci_bus 0000:02: resource 2 [mem 0xdfc00000-0xdfdfffff 64bit pref]
[    0.266839] pci_bus 0000:03: resource 1 [mem 0xf2500000-0xf25fffff]
[    0.266844] pci_bus 0000:05: resource 0 [io  0x4000-0x4fff]
[    0.266849] pci_bus 0000:05: resource 1 [mem 0xf1d00000-0xf24fffff]
[    0.266855] pci_bus 0000:05: resource 2 [mem 0xf0400000-0xf0bfffff 64bit pref]
[    0.266860] pci_bus 0000:0d: resource 0 [io  0x3000-0x3fff]
[    0.266865] pci_bus 0000:0d: resource 1 [mem 0xf1500000-0xf1cfffff]
[    0.266871] pci_bus 0000:0d: resource 2 [mem 0xf0c00000-0xf13fffff 64bit pref]
[    0.266876] pci_bus 0000:0e: resource 1 [mem 0xf1400000-0xf14fffff]
[    0.266931] NET: Registered protocol family 2
[    0.267252] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.267721] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.268056] TCP: Hash tables configured (established 65536 bind 65536)
[    0.268098] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.268163] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.268281] NET: Registered protocol family 1
[    0.268310] pci 0000:00:02.0: Video device with shadowed ROM
[    0.269201] PCI: CLS 64 bytes, default 64
[    0.269274] Unpacking initramfs...
[    1.562019] Freeing initrd memory: 41348K
[    1.562060] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.562065] software IO TLB [mem 0xd699f000-0xda99f000] (64MB) mapped at [ffff8800d699f000-ffff8800da99efff]
[    1.562237] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[    1.562241] hw unit of domain pp0-core 2^-16 Joules
[    1.562244] hw unit of domain package 2^-16 Joules
[    1.562247] hw unit of domain pp1-gpu 2^-16 Joules
[    1.562390] Scanning for low memory corruption every 60 seconds
[    1.563201] audit: initializing netlink subsys (disabled)
[    1.563220] audit: type=2000 audit(1537626485.548:1): initialized
[    1.563980] Initialise system trusted keyring
[    1.564123] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.568338] zbud: loaded
[    1.568798] VFS: Disk quotas dquot_6.6.0
[    1.568881] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.569557] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.570099] fuse init (API version 7.23)
[    1.570402] Key type big_key registered
[    1.570451] Allocating IMA MOK and blacklist keyrings.
[    1.570967] Key type asymmetric registered
[    1.570973] Asymmetric key parser 'x509' registered
[    1.571062] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.571104] io scheduler noop registered
[    1.571109] io scheduler deadline registered (default)
[    1.571183] io scheduler cfq registered
[    1.571371] pcieport 0000:00:1c.0: enabling device (0000 -> 0003)
[    1.572162] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.572177] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.572242] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[    1.572245] vesafb: scrolling: redraw
[    1.572250] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.572270] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90001000000, using 3072k, total 3072k
[    1.572489] Console: switching to colour frame buffer device 128x48
[    1.572541] fb0: VESA VGA frame buffer device
[    1.572576] intel_idle: MWAIT substates: 0x21120
[    1.572579] intel_idle: v0.4.1 model 0x2A
[    1.572582] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.573212] ACPI: AC Adapter [AC] (on-line)
[    1.573338] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    1.573504] ACPI: Lid Switch [LID]
[    1.573594] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    1.573600] ACPI: Sleep Button [SLPB]
[    1.573705] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.573710] ACPI: Power Button [PWRF]
[    1.575534] thermal LNXTHERM:00: registered as thermal_zone0
[    1.575538] ACPI: Thermal Zone [THM0] (40 C)
[    1.575596] GHES: HEST is not enabled!
[    1.575847] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.600877] 0000:00:16.3: ttyS4 at I/O 0x50b0 (irq = 19, base_baud = 115200) is a 16550A
[    1.601802] Linux agpgart interface v0.103
[    1.608279] ACPI: Battery Slot [BAT0] (battery present)
[    1.612691] tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78)
[    1.672784] tpm tpm0: TPM is disabled/deactivated (0x6)
[    1.678370] loop: module loaded
[    1.678832] libphy: Fixed MDIO Bus: probed
[    1.678838] tun: Universal TUN/TAP device driver, 1.6
[    1.678841] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.678912] PPP generic driver version 2.4.2
[    1.679020] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.679028] ehci-pci: EHCI PCI platform driver
[    1.679196] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.679207] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.679224] ehci-pci 0000:00:1a.0: debug port 2
[    1.683131] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.683151] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf262a000
[    1.692640] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.692709] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.692714] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.692719] usb usb1: Product: EHCI Host Controller
[    1.692724] usb usb1: Manufacturer: Linux 4.4.0-112-generic ehci_hcd
[    1.692728] usb usb1: SerialNumber: 0000:00:1a.0
[    1.692975] hub 1-0:1.0: USB hub found
[    1.692987] hub 1-0:1.0: 3 ports detected
[    1.693358] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.693367] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.693382] ehci-pci 0000:00:1d.0: debug port 2
[    1.697290] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.697306] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf2629000
[    1.708638] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.708699] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.708704] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.708709] usb usb2: Product: EHCI Host Controller
[    1.708714] usb usb2: Manufacturer: Linux 4.4.0-112-generic ehci_hcd
[    1.708718] usb usb2: SerialNumber: 0000:00:1d.0
[    1.708958] hub 2-0:1.0: USB hub found
[    1.708968] hub 2-0:1.0: 3 ports detected
[    1.709209] ehci-platform: EHCI generic platform driver
[    1.709235] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.709242] ohci-pci: OHCI PCI platform driver
[    1.709266] ohci-platform: OHCI generic platform driver
[    1.709285] uhci_hcd: USB Universal Host Controller Interface driver
[    1.709411] xhci_hcd 0000:0e:00.0: xHCI Host Controller
[    1.709423] xhci_hcd 0000:0e:00.0: new USB bus registered, assigned bus number 3
[    1.709591] xhci_hcd 0000:0e:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x00000004
[    1.709831] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.709837] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.709841] usb usb3: Product: xHCI Host Controller
[    1.709846] usb usb3: Manufacturer: Linux 4.4.0-112-generic xhci-hcd
[    1.709851] usb usb3: SerialNumber: 0000:0e:00.0
[    1.710089] hub 3-0:1.0: USB hub found
[    1.710103] hub 3-0:1.0: 2 ports detected
[    1.710278] xhci_hcd 0000:0e:00.0: xHCI Host Controller
[    1.710285] xhci_hcd 0000:0e:00.0: new USB bus registered, assigned bus number 4
[    1.713021] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.713056] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    1.713061] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.713066] usb usb4: Product: xHCI Host Controller
[    1.713070] usb usb4: Manufacturer: Linux 4.4.0-112-generic xhci-hcd
[    1.713075] usb usb4: SerialNumber: 0000:0e:00.0
[    1.713329] hub 4-0:1.0: USB hub found
[    1.713343] hub 4-0:1.0: 2 ports detected
[    1.713599] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    1.716976] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.716983] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.717322] mousedev: PS/2 mouse device common for all mice
[    1.717748] rtc_cmos 00:02: RTC can wake from S4
[    1.717961] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.717992] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.718007] i2c /dev entries driver
[    1.718127] device-mapper: uevent: version 1.0.3
[    1.718292] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    1.718325] Intel P-state driver initializing.
[    1.718968] ledtrig-cpu: registered to indicate activity on CPUs
[    1.721916] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.722079] NET: Registered protocol family 10
[    1.723296] NET: Registered protocol family 17
[    1.723351] Key type dns_resolver registered
[    1.724861] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x2e
[    1.724873] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x2e
[    1.724899] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x2e
[    1.724912] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x2e
[    1.724981] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.725293] registered taskstats version 1
[    1.725316] Loading compiled-in X.509 certificates
[    1.726381] Loaded X.509 cert 'Build time autogenerated kernel key: 4c603087bab8f0a02cb3b4e1fb4c40f507e71ef1'
[    1.726409] zswap: loaded using pool lzo/zbud
[    1.729273] Key type trusted registered
[    1.733537] Key type encrypted registered
[    1.733547] AppArmor: AppArmor sha1 policy hashing enabled
[    1.744692] tpm tpm0: A TPM error (6) occurred attempting to read a pcr value
[    1.744695] ima: No TPM chip found, activating TPM-bypass!
[    1.744717] evm: HMAC attrs: 0x1
[    1.745309]   Magic number: 2:84:486
[    1.745438] rtc_cmos 00:02: setting system clock to 2018-09-22 14:28:06 UTC (1537626486)
[    1.745632] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.745635] EDD information not available.
[    1.745801] PM: Hibernation image not present or could not be loaded.
[    1.749978] Freeing unused kernel memory: 1508K
[    1.749981] Write protecting the kernel read-only data: 14336k
[    1.750900] Freeing unused kernel memory: 1728K
[    1.751366] Freeing unused kernel memory: 108K
[    1.765825] random: systemd-udevd: uninitialized urandom read (16 bytes read, 6 bits of entropy available)
[    1.765933] random: systemd-udevd: uninitialized urandom read (16 bytes read, 6 bits of entropy available)
[    1.765951] random: systemd-udevd: uninitialized urandom read (16 bytes read, 6 bits of entropy available)
[    1.765970] random: systemd-udevd: uninitialized urandom read (16 bytes read, 6 bits of entropy available)
[    1.766544] random: udevadm: uninitialized urandom read (16 bytes read, 6 bits of entropy available)
[    1.766576] random: udevadm: uninitialized urandom read (16 bytes read, 6 bits of entropy available)
[    1.775774] random: systemd-udevd: uninitialized urandom read (16 bytes read, 6 bits of entropy available)
[    1.775797] random: systemd-udevd: uninitialized urandom read (16 bytes read, 6 bits of entropy available)
[    1.775809] random: systemd-udevd: uninitialized urandom read (16 bytes read, 6 bits of entropy available)
[    1.776124] random: systemd-udevd: uninitialized urandom read (16 bytes read, 6 bits of entropy available)
[    1.829065] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    1.835715] wmi: Mapper loaded
[    1.838724] pps_core: LinuxPPS API ver. 1 registered
[    1.838727] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.840405] PTP clock support registered
[    1.843828] sdhci: Secure Digital Host Controller Interface driver
[    1.843831] sdhci: Copyright(c) Pierre Ossman
[    1.846562] sdhci-pci 0000:0d:00.0: SDHCI controller found [1180:e823] (rev 4)
[    1.847093] sdhci-pci 0000:0d:00.0: No vmmc regulator found
[    1.847098] sdhci-pci 0000:0d:00.0: No vqmmc regulator found
[    1.848386] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    1.848389] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.848596] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    1.849129] mmc0: SDHCI controller on PCI [0000:0d:00.0] using DMA
[    1.850160] [drm] Initialized drm 1.1.0 20060810
[    2.004724] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    2.020750] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    2.049538] e1000e 0000:00:19.0 eth0: registered PHC clock
[    2.049544] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) f0:de:f1:ec:63:d4
[    2.049548] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    2.049599] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[    2.049629] ahci 0000:00:1f.2: version 3.0
[    2.049865] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    2.050457] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[    2.064789] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x13 impl SATA mode
[    2.064814] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst 
[    2.082142] scsi host0: ahci
[    2.082335] scsi host1: ahci
[    2.082496] scsi host2: ahci
[    2.082678] scsi host3: ahci
[    2.082844] scsi host4: ahci
[    2.083023] scsi host5: ahci
[    2.083121] ata1: SATA max UDMA/133 abar m2048@0xf2628000 port 0xf2628100 irq 30
[    2.083126] ata2: SATA max UDMA/133 abar m2048@0xf2628000 port 0xf2628180 irq 30
[    2.083128] ata3: DUMMY
[    2.083131] ata4: DUMMY
[    2.083135] ata5: SATA max UDMA/133 abar m2048@0xf2628000 port 0xf2628300 irq 30
[    2.083138] ata6: DUMMY
[    2.084298] [drm] Memory usable by graphics device = 2048M
[    2.084303] checking generic (e0000000 300000) vs hw (e0000000 10000000)
[    2.084305] fb: switching to inteldrmfb from VESA VGA
[    2.084363] Console: switching to colour dummy device 80x25
[    2.084440] [drm] Replacing VGA console driver
[    2.090832] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.090836] [drm] Driver supports precise vblank timestamp query.
[    2.091881] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.137627] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    2.137632] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.137934] hub 1-1:1.0: USB hub found
[    2.138104] hub 1-1:1.0: 6 ports detected
[    2.153120] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    2.153126] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.153524] hub 2-1:1.0: USB hub found
[    2.153712] hub 2-1:1.0: 8 ports detected
[    2.200722] [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
[    2.234322] fbcon: inteldrmfb (fb0) is primary device
[    2.234525] Console: switching to colour frame buffer device 170x48
[    2.234591] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.234950] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[    2.235271] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[    2.235401] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
[    2.400717] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.401856] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[    2.401882] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    2.401904] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    2.402897] ata1.00: ATA-8: HITACHI HTS723232A7A364, EC2ZB70R, max UDMA/100
[    2.402915] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.403937] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[    2.403942] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    2.403948] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    2.404929] ata1.00: configured for UDMA/100
[    2.405260] scsi 0:0:0:0: Direct-Access     ATA      HITACHI HTS72323 B70R PQ: 0 ANSI: 5
[    2.405691] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    2.405753] sd 0:0:0:0: [sda] Write Protect is off
[    2.405760] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.405771] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.405790] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.408668] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
[    2.424745] usb 2-1.4: new high-speed USB device number 3 using ehci-pci
[    2.472797]  sda: sda1 sda2 sda3 < sda5 sda6 >
[    2.473477] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.501434] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2514
[    2.501460] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.501890] hub 1-1.1:1.0: USB hub found
[    2.502240] hub 1-1.1:1.0: 4 ports detected
[    2.526018] usb 2-1.4: New USB device found, idVendor=0bdb, idProduct=1911
[    2.526040] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.526056] usb 2-1.4: Product: F5521gw
[    2.526072] usb 2-1.4: Manufacturer: Lenovo
[    2.526088] usb 2-1.4: SerialNumber: 82DCAA97D6D27DB0
[    2.560713] tsc: Refined TSC clocksource calibration: 2790.935 MHz
[    2.560718] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x283acd4ab6d, max_idle_ns: 440795313464 ns
[    2.576728] usb 1-1.3: new full-speed USB device number 4 using ehci-pci
[    2.670815] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2016
[    2.670821] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.670826] usb 1-1.3: Product: Biometric Coprocessor
[    2.670830] usb 1-1.3: Manufacturer: UPEK
[    2.728683] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.732332] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[    2.732591] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[    2.735197] ata2.00: ATAPI: HL-DT-ST DVDRAM GU40N, QX21, max UDMA/133
[    2.739099] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[    2.739307] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[    2.740663] usb 1-1.4: new full-speed USB device number 5 using ehci-pci
[    2.741974] ata2.00: configured for UDMA/133
[    2.743907] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GU40N     QX21 PQ: 0 ANSI: 5
[    2.751373] psmouse serio1: synaptics: queried max coordinates: x [..5472], y [..4448]
[    2.759135] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.759141] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.759386] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.759497] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.832838] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.0, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x120c00/0x0, board id: 1611, fw id: 774180
[    2.832856] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[    2.838601] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f
[    2.838606] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.838611] usb 1-1.4: Product: Broadcom Bluetooth Device
[    2.838615] usb 1-1.4: Manufacturer: Broadcom Corp
[    2.838619] usb 1-1.4: SerialNumber: 7CE9D3B90585
[    2.884529] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[    2.904743] usb 1-1.1.1: new low-speed USB device number 6 using ehci-pci
[    3.021776] usb 1-1.1.1: New USB device found, idVendor=046d, idProduct=c31f
[    3.021781] usb 1-1.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.021785] usb 1-1.1.1: Product: USB Keyboard
[    3.021789] usb 1-1.1.1: Manufacturer: Logitech
[    3.029323] hidraw: raw HID events driver (C) Jiri Kosina
[    3.040291] usbcore: registered new interface driver usbhid
[    3.040295] usbhid: USB HID core driver
[    3.043028] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.0/0003:046D:C31F.0001/input/input8
[    3.076714] ata5: SATA link down (SStatus 0 SControl 300)
[    3.084609] usb 1-1.6: new high-speed USB device number 7 using ehci-pci
[    3.096778] hid-generic 0003:046D:C31F.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:1a.0-1.1.1/input0
[    3.099010] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.1/0003:046D:C31F.0002/input/input9
[    3.153161] hid-generic 0003:046D:C31F.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:1a.0-1.1.1/input1
[    3.183742] usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b217
[    3.183768] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.183799] usb 1-1.6: Product: Integrated Camera
[    3.183803] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
[    3.248641] usb 1-1.1.3: new low-speed USB device number 8 using ehci-pci
[    3.347455] usb 1-1.1.3: New USB device found, idVendor=046d, idProduct=c050
[    3.347461] usb 1-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.347465] usb 1-1.1.3: Product: USB-PS/2 Optical Mouse
[    3.347469] usb 1-1.1.3: Manufacturer: Logitech
[    3.352831] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3:1.0/0003:046D:C050.0003/input/input10
[    3.353032] hid-generic 0003:046D:C050.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-1.1.3/input0
[    3.560774] clocksource: Switched to clocksource tsc
[    4.032593] raid6: sse2x1   gen()  2845 MB/s
[    4.100563] raid6: sse2x1   xor()  2048 MB/s
[    4.168570] raid6: sse2x2   gen()  4801 MB/s
[    4.236566] raid6: sse2x2   xor()  2743 MB/s
[    4.304558] raid6: sse2x4   gen()  7329 MB/s
[    4.372555] raid6: sse2x4   xor()  4478 MB/s
[    4.372558] raid6: using algorithm sse2x4 gen() 7329 MB/s
[    4.372561] raid6: .... xor() 4478 MB/s, rmw enabled
[    4.372563] raid6: using ssse3x2 recovery algorithm
[    4.373899] xor: automatically using best checksumming function:
[    4.412554]    avx       : 17233.000 MB/sec
[    4.434741] Btrfs loaded
[    4.708811] random: nonblocking pool is initialized
[    5.064489] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    6.511480] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    6.511727] systemd[1]: Detected architecture x86-64.
[    6.513876] systemd[1]: Set hostname to <josue-ThinkPad-X220>.
[    8.457488] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    8.457536] systemd[1]: Reached target User and Group Name Lookups.
[    8.457572] systemd[1]: Listening on udev Kernel Socket.
[    8.457609] systemd[1]: Listening on Syslog Socket.
[    8.457722] systemd[1]: Created slice User and Session Slice.
[    8.457771] systemd[1]: Listening on Journal Socket.
[    8.457813] systemd[1]: Listening on udev Control Socket.
[    8.457822] systemd[1]: Reached target Encrypted Volumes.
[    8.457865] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    8.457896] systemd[1]: Listening on LVM2 poll daemon socket.
[    8.457905] systemd[1]: Reached target Remote File Systems (Pre).
[    8.457985] systemd[1]: Created slice System Slice.
[    8.468800] systemd[1]: Starting Set console keymap...
[    8.469478] systemd[1]: Mounting Debug File System...
[    8.470182] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    8.470813] systemd[1]: Started Braille Device Support.
[    8.471864] systemd[1]: Mounting Huge Pages File System...
[    8.472476] systemd[1]: Starting Uncomplicated firewall...
[    8.473069] systemd[1]: Started Read required files in advance.
[    8.545910] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[    8.592694] systemd[1]: Starting Load Kernel Modules...
[    8.593377] systemd[1]: Mounting POSIX Message Queue File System...
[    8.593426] systemd[1]: Reached target Slices.
[    8.593623] systemd[1]: Listening on Journal Audit Socket.
[    8.593707] systemd[1]: Listening on fsck to fsckd communication Socket.
[    8.593740] systemd[1]: Reached target Remote File Systems.
[    8.593851] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    8.593921] systemd[1]: Listening on Journal Socket (/dev/log).
[    8.594693] systemd[1]: Starting Journal Service...
[    8.789396] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    8.801530] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input7
[    8.885601] systemd[1]: Started Trigger resolvconf update for networkd DNS.
[    8.885660] systemd[1]: Listening on LVM2 metadata daemon socket.
[    8.900710] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    8.902655] systemd[1]: Mounted Huge Pages File System.
[    8.902774] systemd[1]: Mounted POSIX Message Queue File System.
[    8.902852] systemd[1]: Mounted Debug File System.
[    8.903278] systemd[1]: Started Uncomplicated firewall.
[    9.112496] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    9.136785] systemd[1]: Starting Create Static Device Nodes in /dev...
[    9.304513] lp: driver loaded but no devices found
[    9.348442] ppdev: user-space parallel port driver
[    9.576080] systemd[1]: Started Set console keymap.
[    9.625001] systemd[1]: Started Journal Service.
[   12.944866] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[   13.107292] systemd-journald[334]: Received request to flush runtime journal from PID 1
[   13.734324] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   13.746006] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\_SB_.PCI0.LPC_.PMIO) (20150930/utaddress-254)
[   13.746018] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   13.746024] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB_.PCI0.LPC_.LPIO) (20150930/utaddress-254)
[   13.746035] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   13.746039] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB_.PCI0.LPC_.LPIO) (20150930/utaddress-254)
[   13.746049] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   13.746053] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB_.PCI0.LPC_.LPIO) (20150930/utaddress-254)
[   13.746063] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   13.746066] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   14.058515] Intel(R) Wireless WiFi driver for Linux
[   14.058518] Copyright(c) 2003- 2015 Intel Corporation
[   14.058744] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[   14.440983] Non-volatile memory driver v1.3
[   14.484940] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[   14.484944] thinkpad_acpi: http://ibm-acpi.sf.net/
[   14.484947] thinkpad_acpi: ThinkPad BIOS 8DET69WW (1.39 ), EC unknown
[   14.484949] thinkpad_acpi: Lenovo ThinkPad X220, model 42914CG
[   14.485625] thinkpad_acpi: detected a 16-level brightness capable ThinkPad
[   14.485771] thinkpad_acpi: radio switch found; radios are enabled
[   14.485910] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
[   14.485937] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[   14.485940] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[   14.488686] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[   14.489785] thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is unblocked
[   14.490183] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[   14.493632] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input11
[   15.117771] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[   15.136900] cdc_acm 2-1.4:1.1: ttyACM0: USB ACM device
[   15.151308] cdc_acm 2-1.4:1.3: ttyACM1: USB ACM device
[   15.153055] Bluetooth: Core ver 2.21
[   15.153079] NET: Registered protocol family 31
[   15.153082] Bluetooth: HCI device and connection manager initialized
[   15.153087] Bluetooth: HCI socket layer initialized
[   15.153092] Bluetooth: L2CAP socket layer initialized
[   15.153102] Bluetooth: SCO socket layer initialized
[   15.153238] cdc_acm 2-1.4:1.9: ttyACM2: USB ACM device
[   15.153947] usbcore: registered new interface driver cdc_acm
[   15.153950] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[   15.221671] cdc_wdm 2-1.4:1.5: cdc-wdm1: USB WDM device
[   15.221737] cdc_wdm 2-1.4:1.8: cdc-wdm2: USB WDM device
[   15.221767] usbcore: registered new interface driver cdc_wdm
[   15.231104] media: Linux media interface: v0.10
[   15.251877] AVX version of gcm_enc/dec engaged.
[   15.251881] AES CTR mode by8 optimization enabled
[   15.272939] usbcore: registered new interface driver btusb
[   15.279905] Linux video capture interface: v2.00
[   15.469111] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
[   15.469116] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[   15.469120] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[   15.469125] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
[   15.469222] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[   15.486898] snd_hda_codec_conexant hdaudioC0D0: CX20590: BIOS auto-probing.
[   15.487373] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20590: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
[   15.487380] snd_hda_codec_conexant hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   15.487387] snd_hda_codec_conexant hdaudioC0D0:    hp_outs=2 (0x1c/0x19/0x0/0x0/0x0)
[   15.487392] snd_hda_codec_conexant hdaudioC0D0:    mono: mono_out=0x0
[   15.487397] snd_hda_codec_conexant hdaudioC0D0:    inputs:
[   15.487403] snd_hda_codec_conexant hdaudioC0D0:      Internal Mic=0x23
[   15.487408] snd_hda_codec_conexant hdaudioC0D0:      Mic=0x1b
[   15.487414] snd_hda_codec_conexant hdaudioC0D0:      Dock Mic=0x1a
[   15.488747] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[   15.498723] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[   15.509938] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   15.510063] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   15.510181] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   15.510300] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[   15.510418] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[   15.510537] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[   15.510655] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[   15.517247] cdc_ncm 2-1.4:1.6: MAC-Address: 02:80:37:ec:02:00
[   15.517640] cdc_ncm 2-1.4:1.6 wwan0: register 'cdc_ncm' at usb-0000:00:1d.0-1.4, Mobile Broadband Network Device, 02:80:37:ec:02:00
[   15.517684] usbcore: registered new interface driver cdc_ncm
[   15.525964] usbcore: registered new interface driver cdc_mbim
[   15.644569] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b217)
[   15.647148] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input19
[   15.647275] usbcore: registered new interface driver uvcvideo
[   15.647279] USB Video Class driver (1.1.1)
[   15.753569] kvm: disabled by bios
[   15.792146] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: renamed from wwan0
[   15.798416] kvm: disabled by bios
[   15.812580] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
[   15.819272] kvm: disabled by bios
[   16.308067] intel_rapl: Found RAPL domain package
[   16.308073] intel_rapl: Found RAPL domain core
[   16.308077] intel_rapl: Found RAPL domain uncore
[   16.308086] intel_rapl: RAPL package 0 domain package locked by BIOS
[   17.563334] cfg80211: World regulatory domain updated:
[   17.563338] cfg80211:  DFS Master region: unset
[   17.563341] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   17.563345] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   17.563350] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   17.563354] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   17.563358] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   17.563363] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   17.563367] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   17.563370] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   17.563374] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   18.062417] Adding 8267772k swap on /dev/sda6.  Priority:-1 extents:1 across:8267772k FS
[   18.479300] cgroup: new mount options do not match the existing superblock, will be ignored
[   21.951941] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   21.951945] Bluetooth: BNEP filters: protocol multicast
[   21.951951] Bluetooth: BNEP socket layer initialized
[   33.310991] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   33.311152] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[   33.311373] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[   33.311462] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[   33.589212] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[   33.589437] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[   33.589526] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[   33.671551] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   33.676066] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[   33.911939] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[   34.594070] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   40.731613] wlp3s0: authenticate with 9e:97:26:13:86:8f
[   40.734696] wlp3s0: send auth to 9e:97:26:13:86:8f (try 1/3)
[   40.743291] wlp3s0: authenticated
[   40.747515] wlp3s0: associate with 9e:97:26:13:86:8f (try 1/3)
[   40.756358] wlp3s0: RX AssocResp from 9e:97:26:13:86:8f (capab=0x511 status=0 aid=4)
[   40.776850] wlp3s0: associated
[   40.776920] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[   57.443789] Bluetooth: RFCOMM TTY layer initialized
[   57.443797] Bluetooth: RFCOMM socket layer initialized
[   57.443804] Bluetooth: RFCOMM ver 1.11
[ 2948.820674] wlp3s0: deauthenticating from 9e:97:26:13:86:8f by local choice (Reason: 3=DEAUTH_LEAVING)
[ 2948.849571] cfg80211: World regulatory domain updated:
[ 2948.849576] cfg80211:  DFS Master region: unset
[ 2948.849579] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 2948.849585] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 2948.849591] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 2948.849596] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 2948.849601] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 2948.849607] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 2948.849612] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 2948.849617] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 2948.849622] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 2949.652182] PM: Syncing filesystems ... done.
[ 2950.220670] PM: Preparing system for sleep (mem)
[ 2950.221219] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 2950.223404] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 2950.224613] PM: Suspending system (mem)
[ 2950.224628] Suspending console(s) (use no_console_suspend to debug)
[ 2950.401493] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 2950.401642] sd 0:0:0:0: [sda] Stopping disk
[ 2950.670871] e1000e: EEE TX LPI TIMER: 00000011
[ 2950.910442] PM: suspend of devices complete after 685.610 msecs
[ 2950.926586] PM: late suspend of devices complete after 16.117 msecs
[ 2950.928430] pcieport 0000:00:1c.6: System wakeup enabled by ACPI
[ 2950.929476] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 2950.929903] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[ 2950.930023] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[ 2950.942762] PM: noirq suspend of devices complete after 16.169 msecs
[ 2950.943305] ACPI: Preparing to enter system sleep state S3
[ 2951.134280] ACPI : EC: EC stopped
[ 2951.134281] PM: Saving platform NVS memory
[ 2951.134286] Disabling non-boot CPUs ...
[ 2951.135110] Broke affinity for irq 30
[ 2951.136154] smpboot: CPU 1 is now offline
[ 2951.147873] Broke affinity for irq 30
[ 2951.147876] Broke affinity for irq 33
[ 2951.148915] smpboot: CPU 2 is now offline
[ 2951.159423] Broke affinity for irq 1
[ 2951.159442] Broke affinity for irq 9
[ 2951.159454] Broke affinity for irq 12
[ 2951.159465] Broke affinity for irq 16
[ 2951.159478] Broke affinity for irq 23
[ 2951.160009] Broke affinity for irq 30
[ 2951.160017] Broke affinity for irq 31
[ 2951.160025] Broke affinity for irq 33
[ 2951.161142] smpboot: CPU 3 is now offline
[ 2951.171857] ACPI: Low-level resume complete
[ 2951.171894] ACPI : EC: EC started
[ 2951.171894] PM: Restoring platform NVS memory
[ 2951.172749] microcode: CPU0 microcode updated early to revision 0x2e, date = 2018-04-10
[ 2951.172768] Enabling non-boot CPUs ...
[ 2951.192776] x86: Booting SMP configuration:
[ 2951.192781] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 2951.193772] Disabled fast string operations
[ 2951.275827]  cache: parent cpu1 should not be sleeping
[ 2951.276256] CPU1 is up
[ 2951.296260] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 2951.296956] microcode: CPU2 microcode updated early to revision 0x2e, date = 2018-04-10
[ 2951.296974] Disabled fast string operations
[ 2951.376032]  cache: parent cpu2 should not be sleeping
[ 2951.376468] CPU2 is up
[ 2951.397165] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 2951.397987] Disabled fast string operations
[ 2951.480034]  cache: parent cpu3 should not be sleeping
[ 2951.480483] CPU3 is up
[ 2951.489708] ACPI: Waking up from system sleep state S3
[ 2951.885322] pcieport 0000:00:1c.6: System wakeup disabled by ACPI
[ 2951.885544] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[ 2951.886618] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 2951.886843] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 2951.887433] PM: noirq resume of devices complete after 23.760 msecs
[ 2951.888584] PM: early resume of devices complete after 1.040 msecs
[ 2951.888750] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[ 2951.889800] usb usb3: root hub lost power or was reset
[ 2951.889810] usb usb4: root hub lost power or was reset
[ 2951.893847] rtc_cmos 00:02: System wakeup disabled by ACPI
[ 2951.903441] sd 0:0:0:0: [sda] Starting disk
[ 2951.927692] tpm tpm0: TPM is disabled/deactivated (0x6)
[ 2952.119709] usb 2-1.4: reset high-speed USB device number 3 using ehci-pci
[ 2952.127717] usb 1-1.1: reset high-speed USB device number 3 using ehci-pci
[ 2952.211973] usb 2-1.4: device firmware changed
[ 2952.219642] ata5: SATA link down (SStatus 0 SControl 300)
[ 2952.219691] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2952.291659] usb 1-1.6: reset high-speed USB device number 7 using ehci-pci
[ 2952.345882] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 2952.346180] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 2952.353666] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 2952.353921] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 2952.356551] ata2.00: configured for UDMA/133
[ 2952.459680] usb 1-1.3: reset full-speed USB device number 4 using ehci-pci
[ 2952.623689] usb 1-1.4: reset full-speed USB device number 5 using ehci-pci
[ 2952.715950] psmouse serio1: synaptics: queried max coordinates: x [..5472], y [..4448]
[ 2952.975687] usb 1-1.1.1: reset low-speed USB device number 6 using ehci-pci
[ 2953.515656] usb 1-1.1.3: reset low-speed USB device number 8 using ehci-pci
[ 2953.611619] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2953.612910] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 2953.612925] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2953.612938] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2953.615331] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 2953.615345] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2953.615359] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2953.616258] ata1.00: configured for UDMA/100
[ 2953.813833] PM: resume of devices complete after 1925.299 msecs
[ 2953.816212] ACPI: \_SB_.PCI0.LPC_.EC__.BAT1: docking
[ 2953.816235] PM: Finishing wakeup.
[ 2953.823122] Restarting tasks ... 
[ 2953.823123] usb 2-1.4: USB disconnect, device number 3
[ 2953.825175] ACPI: \_SB_.PCI0.LPC_.EC__.BAT1: Unable to dock!
[ 2953.833544] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: unregister 'cdc_ncm' usb-0000:00:1d.0-1.4, Mobile Broadband Network Device
[ 2953.833592] done.
[ 2954.141616] e1000e: enp0s25 NIC Link is Down
[ 2954.142548] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 2954.142726] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 2954.142948] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 2954.143040] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 2954.251518] usb 2-1.4: new high-speed USB device number 4 using ehci-pci
[ 2954.349909] usb 2-1.4: New USB device found, idVendor=0bdb, idProduct=1911
[ 2954.349916] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2954.349921] usb 2-1.4: Product: F5521gw
[ 2954.349926] usb 2-1.4: Manufacturer: Lenovo
[ 2954.349931] usb 2-1.4: SerialNumber: 82DCAA97D6D27DB0
[ 2954.384900] cdc_acm 2-1.4:1.1: ttyACM0: USB ACM device
[ 2954.386101] cdc_acm 2-1.4:1.3: ttyACM1: USB ACM device
[ 2954.387416] cdc_wdm 2-1.4:1.5: cdc-wdm1: USB WDM device
[ 2954.411718] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 2954.411949] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 2954.412042] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 2954.416499] cdc_ncm 2-1.4:1.6: MAC-Address: 02:80:37:ec:02:00
[ 2954.492437] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 2954.492894] cdc_ncm 2-1.4:1.6 wwan0: register 'cdc_ncm' at usb-0000:00:1d.0-1.4, Mobile Broadband Network Device, 02:80:37:ec:02:00
[ 2954.494732] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 2954.495653] cdc_wdm 2-1.4:1.8: cdc-wdm2: USB WDM device
[ 2954.496317] cdc_acm 2-1.4:1.9: ttyACM2: USB ACM device
[ 2954.739759] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 2954.740119] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: renamed from wwan0
[ 2954.816433] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 2956.102427] cdc_wdm 2-1.4:1.8: wdm_int_callback - 0 bytes
[ 2956.103410] cdc_wdm 2-1.4:1.5: wdm_int_callback - 0 bytes
[ 2961.025912] wlp3s0: authenticate with 9e:97:26:13:86:8f
[ 2961.027939] wlp3s0: send auth to 9e:97:26:13:86:8f (try 1/3)
[ 2961.076546] wlp3s0: authenticated
[ 2961.079500] wlp3s0: associate with 9e:97:26:13:86:8f (try 1/3)
[ 2961.088209] wlp3s0: RX AssocResp from 9e:97:26:13:86:8f (capab=0x511 status=0 aid=5)
[ 2961.107972] wlp3s0: associated
[ 2961.108057] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 5163.497891] wlp3s0: deauthenticating from 9e:97:26:13:86:8f by local choice (Reason: 3=DEAUTH_LEAVING)
[ 5163.529550] cfg80211: World regulatory domain updated:
[ 5163.529555] cfg80211:  DFS Master region: unset
[ 5163.529558] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 5163.529563] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 5163.529569] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 5163.529574] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 5163.529580] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 5163.529586] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 5163.529591] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 5163.529596] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 5163.529601] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 5174.118038] PM: Syncing filesystems ... done.
[ 5174.647302] PM: Preparing system for sleep (mem)
[ 5174.648364] Freezing user space processes ... (elapsed 0.004 seconds) done.
[ 5174.652515] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 5174.654100] PM: Suspending system (mem)
[ 5174.654143] Suspending console(s) (use no_console_suspend to debug)
[ 5174.826141] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 5174.850575] sd 0:0:0:0: [sda] Stopping disk
[ 5175.094628] e1000e: EEE TX LPI TIMER: 00000011
[ 5175.342210] PM: suspend of devices complete after 687.459 msecs
[ 5175.358251] PM: late suspend of devices complete after 16.026 msecs
[ 5175.366768] pcieport 0000:00:1c.6: System wakeup enabled by ACPI
[ 5175.367047] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 5175.367265] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[ 5175.367473] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[ 5175.382433] PM: noirq suspend of devices complete after 24.176 msecs
[ 5175.382976] ACPI: Preparing to enter system sleep state S3
[ 5175.574039] ACPI : EC: EC stopped
[ 5175.574041] PM: Saving platform NVS memory
[ 5175.574052] Disabling non-boot CPUs ...
[ 5175.575467] Broke affinity for irq 30
[ 5175.576608] smpboot: CPU 1 is now offline
[ 5175.589428] Broke affinity for irq 30
[ 5175.589438] Broke affinity for irq 33
[ 5175.590582] smpboot: CPU 2 is now offline
[ 5175.608270] Broke affinity for irq 1
[ 5175.608289] Broke affinity for irq 9
[ 5175.608301] Broke affinity for irq 12
[ 5175.608313] Broke affinity for irq 16
[ 5175.608325] Broke affinity for irq 23
[ 5175.608857] Broke affinity for irq 30
[ 5175.608865] Broke affinity for irq 31
[ 5175.608872] Broke affinity for irq 33
[ 5175.610024] smpboot: CPU 3 is now offline
[ 5175.625444] ACPI: Low-level resume complete
[ 5175.625481] ACPI : EC: EC started
[ 5175.625482] PM: Restoring platform NVS memory
[ 5175.626355] microcode: CPU0 microcode updated early to revision 0x2e, date = 2018-04-10
[ 5175.626372] Enabling non-boot CPUs ...
[ 5175.644912] x86: Booting SMP configuration:
[ 5175.644917] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 5175.645806] Disabled fast string operations
[ 5175.728266]  cache: parent cpu1 should not be sleeping
[ 5175.728723] CPU1 is up
[ 5175.749174] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 5175.750302] microcode: CPU2 microcode updated early to revision 0x2e, date = 2018-04-10
[ 5175.750322] Disabled fast string operations
[ 5175.832051]  cache: parent cpu2 should not be sleeping
[ 5175.832487] CPU2 is up
[ 5175.852675] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 5175.853106] Disabled fast string operations
[ 5175.936256]  cache: parent cpu3 should not be sleeping
[ 5175.936700] CPU3 is up
[ 5175.944940] ACPI: Waking up from system sleep state S3
[ 5176.341042] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 5176.344628] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[ 5176.344807] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 5176.345254] pcieport 0000:00:1c.6: System wakeup disabled by ACPI
[ 5176.345669] PM: noirq resume of devices complete after 25.805 msecs
[ 5176.346595] PM: early resume of devices complete after 0.821 msecs
[ 5176.347552] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[ 5176.351274] rtc_cmos 00:02: System wakeup disabled by ACPI
[ 5176.351388] usb usb3: root hub lost power or was reset
[ 5176.351396] usb usb4: root hub lost power or was reset
[ 5176.361122] sd 0:0:0:0: [sda] Starting disk
[ 5176.383900] tpm tpm0: TPM is disabled/deactivated (0x6)
[ 5176.583900] usb 2-1.4: reset high-speed USB device number 4 using ehci-pci
[ 5176.591872] usb 1-1.1: reset high-speed USB device number 3 using ehci-pci
[ 5176.676024] usb 2-1.4: device firmware changed
[ 5176.679839] ata5: SATA link down (SStatus 0 SControl 300)
[ 5176.687811] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5176.755870] usb 1-1.3: reset full-speed USB device number 4 using ehci-pci
[ 5176.814835] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 5176.815089] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 5176.822541] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 5176.822830] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 5176.825462] ata2.00: configured for UDMA/133
[ 5176.919809] usb 1-1.6: reset high-speed USB device number 7 using ehci-pci
[ 5177.087827] usb 1-1.4: reset full-speed USB device number 5 using ehci-pci
[ 5177.174055] psmouse serio1: synaptics: queried max coordinates: x [..5472], y [..4448]
[ 5177.439823] usb 1-1.1.1: reset low-speed USB device number 6 using ehci-pci
[ 5177.979751] usb 1-1.1.3: reset low-speed USB device number 8 using ehci-pci
[ 5178.079705] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5178.081092] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 5178.081108] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 5178.081123] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 5178.083578] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 5178.083598] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 5178.083659] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 5178.084796] ata1.00: configured for UDMA/100
[ 5178.277402] PM: resume of devices complete after 1930.993 msecs
[ 5178.279398] PM: Finishing wakeup.
[ 5178.279406] Restarting tasks ... 
[ 5178.287649] usb 2-1.4: USB disconnect, device number 4
[ 5178.295773] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: unregister 'cdc_ncm' usb-0000:00:1d.0-1.4, Mobile Broadband Network Device
[ 5178.312816] done.
[ 5178.573553] e1000e: enp0s25 NIC Link is Down
[ 5178.574710] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 5178.575935] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 5178.576162] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 5178.576254] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 5178.623547] usb 2-1.4: new high-speed USB device number 5 using ehci-pci
[ 5178.721684] usb 2-1.4: New USB device found, idVendor=0bdb, idProduct=1911
[ 5178.721691] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5178.721695] usb 2-1.4: Product: F5521gw
[ 5178.721699] usb 2-1.4: Manufacturer: Lenovo
[ 5178.721703] usb 2-1.4: SerialNumber: 82DCAA97D6D27DB0
[ 5178.755410] cdc_acm 2-1.4:1.1: ttyACM0: USB ACM device
[ 5178.756411] cdc_acm 2-1.4:1.3: ttyACM1: USB ACM device
[ 5178.758315] cdc_wdm 2-1.4:1.5: cdc-wdm1: USB WDM device
[ 5178.788429] cdc_ncm 2-1.4:1.6: MAC-Address: 02:80:37:ec:02:00
[ 5178.847729] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 5178.847954] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 5178.848045] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 5178.928535] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 5178.928929] cdc_ncm 2-1.4:1.6 wwan0: register 'cdc_ncm' at usb-0000:00:1d.0-1.4, Mobile Broadband Network Device, 02:80:37:ec:02:00
[ 5178.929920] cdc_wdm 2-1.4:1.8: cdc-wdm2: USB WDM device
[ 5178.930141] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 5178.930291] cdc_acm 2-1.4:1.9: ttyACM2: USB ACM device
[ 5179.171792] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 5179.172051] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: renamed from wwan0
[ 5179.269923] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 5180.511866] cdc_wdm 2-1.4:1.5: wdm_int_callback - 0 bytes
[ 5180.513758] cdc_wdm 2-1.4:1.8: wdm_int_callback - 0 bytes
[ 5180.651357] usb 1-1.2: new high-speed USB device number 9 using ehci-pci
[ 5180.748223] usb 1-1.2: New USB device found, idVendor=0bc2, idProduct=ab21
[ 5180.748230] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5180.748236] usb 1-1.2: Product: Backup+  RD
[ 5180.748241] usb 1-1.2: Manufacturer: Seagate 
[ 5180.748246] usb 1-1.2: SerialNumber: NA76HSJC
[ 5180.817271] usbcore: registered new interface driver usb-storage
[ 5180.838140] scsi host6: uas
[ 5180.838350] usbcore: registered new interface driver uas
[ 5180.840227] scsi 6:0:0:0: Direct-Access     Seagate  Backup+  RD      0143 PQ: 0 ANSI: 6
[ 5180.843358] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 5180.895937] sd 6:0:0:0: [sdb] Spinning up disk...
[ 5184.762952] .ready
[ 5184.781347] sd 6:0:0:0: [sdb] 1953525167 512-byte logical blocks: (1.00 TB/932 GiB)
[ 5184.783551] sd 6:0:0:0: [sdb] Write Protect is off
[ 5184.783563] sd 6:0:0:0: [sdb] Mode Sense: 2b 00 10 08
[ 5184.785387] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 5184.890088]  sdb: sdb1 sdb2 sdb3
[ 5184.914053] sd 6:0:0:0: [sdb] Attached SCSI disk
[ 5185.500871] wlp3s0: authenticate with 9e:97:26:13:86:8f
[ 5185.502913] wlp3s0: send auth to 9e:97:26:13:86:8f (try 1/3)
[ 5185.530611] wlp3s0: authenticated
[ 5185.531240] wlp3s0: associate with 9e:97:26:13:86:8f (try 1/3)
[ 5185.539787] wlp3s0: RX AssocResp from 9e:97:26:13:86:8f (capab=0x511 status=0 aid=6)
[ 5185.558619] wlp3s0: associated
[ 5185.558689] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 5210.146824] usb 1-1.2: USB disconnect, device number 9
[ 5210.151857] sd 6:0:0:0: [sdb] Synchronizing SCSI cache
[ 5210.269086] sd 6:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[ 5213.160933] usb 2-1.2: new high-speed USB device number 6 using ehci-pci
[ 5213.256923] usb 2-1.2: New USB device found, idVendor=0bc2, idProduct=ab21
[ 5213.256936] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5213.256946] usb 2-1.2: Product: Backup+  RD
[ 5213.256955] usb 2-1.2: Manufacturer: Seagate 
[ 5213.256964] usb 2-1.2: SerialNumber: NA76HSJC
[ 5213.270640] scsi host7: uas
[ 5213.272726] scsi 7:0:0:0: Direct-Access     Seagate  Backup+  RD      0143 PQ: 0 ANSI: 6
[ 5213.275761] sd 7:0:0:0: Attached scsi generic sg2 type 0
[ 5213.327111] sd 7:0:0:0: [sdb] Spinning up disk...
[ 5216.992698] .ready
[ 5217.010381] sd 7:0:0:0: [sdb] 1953525167 512-byte logical blocks: (1.00 TB/932 GiB)
[ 5217.012093] sd 7:0:0:0: [sdb] Write Protect is off
[ 5217.012109] sd 7:0:0:0: [sdb] Mode Sense: 2b 00 10 08
[ 5217.013378] sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 5217.102458]  sdb: sdb1 sdb2 sdb3
[ 5217.125006] sd 7:0:0:0: [sdb] Attached SCSI disk
[ 6165.801974] wlp3s0: deauthenticating from 9e:97:26:13:86:8f by local choice (Reason: 3=DEAUTH_LEAVING)
[ 6165.831565] cfg80211: World regulatory domain updated:
[ 6165.831570] cfg80211:  DFS Master region: unset
[ 6165.831574] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 6165.831579] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 6165.831585] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 6165.831591] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 6165.831596] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 6165.831602] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 6165.831608] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 6165.831613] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 6165.831618] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 6176.405505] PM: Syncing filesystems ... done.
[ 6176.778701] PM: Preparing system for sleep (mem)
[ 6176.779569] Freezing user space processes ... (elapsed 0.003 seconds) done.
[ 6176.783407] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 6176.785007] PM: Suspending system (mem)
[ 6176.785053] Suspending console(s) (use no_console_suspend to debug)
[ 6176.785871] sd 7:0:0:0: [sdb] Synchronizing SCSI cache
[ 6176.954969] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 6176.955133] sd 0:0:0:0: [sda] Stopping disk
[ 6177.235412] e1000e: EEE TX LPI TIMER: 00000011
[ 6177.461991] PM: suspend of devices complete after 676.270 msecs
[ 6177.478021] PM: late suspend of devices complete after 16.011 msecs
[ 6177.480591] pcieport 0000:00:1c.6: System wakeup enabled by ACPI
[ 6177.480726] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 6177.482071] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[ 6177.482180] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[ 6177.497962] PM: noirq suspend of devices complete after 19.932 msecs
[ 6177.498678] ACPI: Preparing to enter system sleep state S3
[ 6177.689851] ACPI : EC: EC stopped
[ 6177.689853] PM: Saving platform NVS memory
[ 6177.689864] Disabling non-boot CPUs ...
[ 6177.691339] Broke affinity for irq 30
[ 6177.692483] smpboot: CPU 1 is now offline
[ 6177.705269] Broke affinity for irq 30
[ 6177.705278] Broke affinity for irq 33
[ 6177.706416] smpboot: CPU 2 is now offline
[ 6177.724073] Broke affinity for irq 1
[ 6177.724088] Broke affinity for irq 9
[ 6177.724097] Broke affinity for irq 12
[ 6177.724106] Broke affinity for irq 16
[ 6177.724117] Broke affinity for irq 23
[ 6177.724641] Broke affinity for irq 30
[ 6177.724646] Broke affinity for irq 31
[ 6177.724652] Broke affinity for irq 33
[ 6177.725752] smpboot: CPU 3 is now offline
[ 6177.740826] ACPI: Low-level resume complete
[ 6177.740863] ACPI : EC: EC started
[ 6177.740863] PM: Restoring platform NVS memory
[ 6177.741718] microcode: CPU0 microcode updated early to revision 0x2e, date = 2018-04-10
[ 6177.741738] Enabling non-boot CPUs ...
[ 6177.760702] x86: Booting SMP configuration:
[ 6177.760708] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 6177.761700] Disabled fast string operations
[ 6177.843744]  cache: parent cpu1 should not be sleeping
[ 6177.844177] CPU1 is up
[ 6177.864075] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 6177.864686] microcode: CPU2 microcode updated early to revision 0x2e, date = 2018-04-10
[ 6177.864705] Disabled fast string operations
[ 6177.943947]  cache: parent cpu2 should not be sleeping
[ 6177.944392] CPU2 is up
[ 6177.965118] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 6177.965939] Disabled fast string operations
[ 6178.047945]  cache: parent cpu3 should not be sleeping
[ 6178.048384] CPU3 is up
[ 6178.052413] ACPI: Waking up from system sleep state S3
[ 6178.444620] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[ 6178.444641] pcieport 0000:00:1c.6: System wakeup disabled by ACPI
[ 6178.446092] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 6178.446401] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 6178.446890] PM: noirq resume of devices complete after 19.315 msecs
[ 6178.448270] PM: early resume of devices complete after 1.279 msecs
[ 6178.448443] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[ 6178.450143] rtc_cmos 00:02: System wakeup disabled by ACPI
[ 6178.450310] usb usb3: root hub lost power or was reset
[ 6178.450319] usb usb4: root hub lost power or was reset
[ 6178.471863] sd 0:0:0:0: [sda] Starting disk
[ 6178.483550] tpm tpm0: TPM is disabled/deactivated (0x6)
[ 6178.683581] usb 2-1.4: reset high-speed USB device number 5 using ehci-pci
[ 6178.699621] usb 1-1.1: reset high-speed USB device number 3 using ehci-pci
[ 6178.775661] usb 2-1.4: device firmware changed
[ 6178.783549] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 6178.795543] ata5: SATA link down (SStatus 0 SControl 300)
[ 6178.863545] usb 1-1.6: reset high-speed USB device number 7 using ehci-pci
[ 6178.910564] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 6178.910808] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 6178.918416] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 6178.918659] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 6178.921344] ata2.00: configured for UDMA/133
[ 6179.031585] usb 1-1.3: reset full-speed USB device number 4 using ehci-pci
[ 6179.195563] usb 1-1.4: reset full-speed USB device number 5 using ehci-pci
[ 6179.275478] psmouse serio1: synaptics: queried max coordinates: x [..5472], y [..4448]
[ 6179.547560] usb 1-1.1.1: reset low-speed USB device number 6 using ehci-pci
[ 6180.087498] usb 1-1.1.3: reset low-speed USB device number 8 using ehci-pci
[ 6180.195474] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 6180.196784] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 6180.196800] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 6180.196815] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 6180.199094] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 6180.199111] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 6180.199126] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 6180.200002] ata1.00: configured for UDMA/100
[ 6180.385553] PM: resume of devices complete after 1937.384 msecs
[ 6180.387895] PM: Finishing wakeup.
[ 6180.387904] Restarting tasks ... done.
[ 6180.412387] usb 2-1.4: USB disconnect, device number 5
[ 6180.418446] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: unregister 'cdc_ncm' usb-0000:00:1d.0-1.4, Mobile Broadband Network Device
[ 6180.763361] usb 2-1.4: new high-speed USB device number 7 using ehci-pci
[ 6180.770113] e1000e: enp0s25 NIC Link is Down
[ 6180.771312] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 6180.771924] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 6180.772152] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 6180.772243] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 6180.861512] usb 2-1.4: New USB device found, idVendor=0bdb, idProduct=1911
[ 6180.861519] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6180.861525] usb 2-1.4: Product: F5521gw
[ 6180.861529] usb 2-1.4: Manufacturer: Lenovo
[ 6180.861534] usb 2-1.4: SerialNumber: 82DCAA97D6D27DB0
[ 6180.893936] cdc_acm 2-1.4:1.1: ttyACM0: USB ACM device
[ 6180.895279] cdc_acm 2-1.4:1.3: ttyACM1: USB ACM device
[ 6180.896683] cdc_wdm 2-1.4:1.5: cdc-wdm1: USB WDM device
[ 6180.928621] cdc_ncm 2-1.4:1.6: MAC-Address: 02:80:37:ec:02:00
[ 6181.047854] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 6181.048103] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 6181.048197] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 6181.128176] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 6181.129918] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 6181.363599] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 6181.364127] cdc_ncm 2-1.4:1.6 wwan0: register 'cdc_ncm' at usb-0000:00:1d.0-1.4, Mobile Broadband Network Device, 02:80:37:ec:02:00
[ 6181.365878] cdc_wdm 2-1.4:1.8: cdc-wdm2: USB WDM device
[ 6181.366374] cdc_acm 2-1.4:1.9: ttyACM2: USB ACM device
[ 6181.424643] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 6181.430391] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: renamed from wwan0
[ 6182.949447] cdc_wdm 2-1.4:1.8: wdm_int_callback - 0 bytes
[ 6182.951440] cdc_wdm 2-1.4:1.5: wdm_int_callback - 0 bytes
[ 6187.641640] wlp3s0: authenticate with 9e:97:26:13:86:8f
[ 6187.644149] wlp3s0: send auth to 9e:97:26:13:86:8f (try 1/3)
[ 6187.706452] wlp3s0: authenticated
[ 6187.706992] wlp3s0: associate with 9e:97:26:13:86:8f (try 1/3)
[ 6187.715738] wlp3s0: RX AssocResp from 9e:97:26:13:86:8f (capab=0x511 status=0 aid=7)
[ 6187.735374] wlp3s0: associated
[ 6187.735465] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 7483.708663] perf interrupt took too long (2505 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[ 7499.883439] usb 2-1.2: USB disconnect, device number 6
[ 7499.887845] sd 7:0:0:0: [sdb] Synchronizing SCSI cache
[ 7500.005089] sd 7:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[10222.130713] cfg80211: World regulatory domain updated:
[10222.130719] cfg80211:  DFS Master region: unset
[10222.130723] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[10222.130730] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[10222.130737] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[10222.130743] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[10222.130750] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[10222.130758] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[10222.130764] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[10222.130770] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[10222.130776] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[10225.326421] wlp3s0: authenticate with 9e:97:26:13:86:8f
[10225.328817] wlp3s0: send auth to 9e:97:26:13:86:8f (try 1/3)
[10225.424445] wlp3s0: authenticated
[10225.425239] wlp3s0: associate with 9e:97:26:13:86:8f (try 1/3)
[10225.433839] wlp3s0: RX AssocResp from 9e:97:26:13:86:8f (capab=0x511 status=0 aid=7)
[10225.453792] wlp3s0: associated
[11532.977022] usb 2-1.2: new high-speed USB device number 8 using ehci-pci
[11533.072673] usb 2-1.2: New USB device found, idVendor=0bc2, idProduct=ab21
[11533.072692] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[11533.072708] usb 2-1.2: Product: Backup+  RD
[11533.072722] usb 2-1.2: Manufacturer: Seagate 
[11533.072736] usb 2-1.2: SerialNumber: NA76HSJC
[11533.086872] scsi host8: uas
[11533.089500] scsi 8:0:0:0: Direct-Access     Seagate  Backup+  RD      0143 PQ: 0 ANSI: 6
[11533.093847] sd 8:0:0:0: Attached scsi generic sg2 type 0
[11533.144582] sd 8:0:0:0: [sdb] Spinning up disk...
[11536.904722] .ready
[11536.922483] sd 8:0:0:0: [sdb] 1953525167 512-byte logical blocks: (1.00 TB/932 GiB)
[11536.924217] sd 8:0:0:0: [sdb] Write Protect is off
[11536.924235] sd 8:0:0:0: [sdb] Mode Sense: 2b 00 10 08
[11536.926424] sd 8:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
[11537.014177]  sdb: sdb1 sdb2 sdb3
[11537.035892] sd 8:0:0:0: [sdb] Attached SCSI disk

Dernière modification par Josué23 (Le 22/09/2018, à 21:51)

inbox · Le 23/09/2018, à 10:20

Il n'y a pas d'erreur, concernant sdb, signalant un problème matériel avec ton disque externe. Ton problème de lecture provient donc, probablement, de ta dernière copie de fichiers.

J'ai uniquement trouvé ce message :

[ 7500.005089] sd 7:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK

De ce que j'en comprends, la synchronisation du cache n'a pu se terminer normalement.

Ton disque externe (sdb) contient 3 partitions. Sur laquelle as-tu ce problème de lecture/écriture ?

Josué23 · Le 23/09/2018, à 11:44

Merci beaucoup

Le problème est sur sdb3. J'ai testé de brancher le DD sur une TV pour voir si il arrive à lire. Le dossier s'ouvre mais les derniers fichiers et le sous dossier ajoutés sont illisibles ou non apparents. Pas de problème pour lire les fichiers plus anciens.

Quelle serait la marche à suivre pour entrer dans le dossier et corriger l'erreur ou effacer les derniers fichiers ajoutés ?

Dernière modification par Josué23 (Le 23/09/2018, à 11:44)

inbox · Le 23/09/2018, à 11:58

Comme c'est du NTFS, et si tu as un Windows sous la main, je te conseille d'effectuer un chkdsk.

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 22/09/2018, à 20:29

DD Externe : "Impossible d'afficher le contenu du dossier"

#2 Le 22/09/2018, à 20:48

Re : DD Externe : "Impossible d'afficher le contenu du dossier"

#3 Le 22/09/2018, à 21:48

Re : DD Externe : "Impossible d'afficher le contenu du dossier"

#4 Le 23/09/2018, à 10:20

Re : DD Externe : "Impossible d'afficher le contenu du dossier"

#5 Le 23/09/2018, à 11:44

Re : DD Externe : "Impossible d'afficher le contenu du dossier"

#6 Le 23/09/2018, à 11:58

Re : DD Externe : "Impossible d'afficher le contenu du dossier"

Pied de page des forums