#1 Le 21/01/2019, à 19:50
- Lolotte22
Pourquoi partitionner ?
Bonjour.
Pourquoi partitionner son disque si on fait des sauvegardes quotidiennes et automatiques, et si l'on ne veut qu'un seul système d'exploitation.
Merci.
Hors ligne
#2 Le 21/01/2019, à 19:59
- malbo
Re : Pourquoi partitionner ?
Si on crée une partition /home pour le stockage de données, ça permet d'avoir une partition racine assez peu occupée. Du coup, on peut créer une image de la partition racine - avec Clonezilla - qui est de petite taille. Moi je trouve ça utile de pouvoir restaurer sa partition racine.
Dernière modification par malbo (Le 21/01/2019, à 20:00)
Hors ligne
#3 Le 21/01/2019, à 20:04
- Watael
Re : Pourquoi partitionner ?
quoi ?
mais pourquoi respirer si on peut se couper les ongles ?
le partitionnement est un pré-requis à toute installation : de toute façon, il faut créer au moins une partition, et donc, "partitionner" !
malbo a l'air d'avoir compris ton interrogation.
pour moi, il manque des informations.
Connected \o/
Welcome to sHell. · eval is evil.
En ligne
#4 Le 21/01/2019, à 20:10
- Nasman
Re : Pourquoi partitionner ?
Même avec une seule partition sur un disque, il faut partitionner. Les seuls supports formatés sans partition sont les disquettes.
Les étapes suivantes sont nécessaire :
- création d'une table des partitions (structure le disque en préparant un emplacement qui servira à décrire les partitions
- création d'une ou de plusieurs partitions (définit une zone du disque qui sera réservée, indication de l'emplacement de son début et de sa taille)
- création d'un système de fichier pour une partition donnée (indique de quelle façon les fichiers seront enregistrés sur cette partition - système de rangement)
PC fixe sous Bionic 64 bits et portable avec Focal 64 bits
Hors ligne
#5 Le 21/01/2019, à 20:15
- Zakhar
Re : Pourquoi partitionner ?
Mais la question (mal formulée) de lolotte, est sans doute pourquoi créer plusieurs partitions.
En réalité on n'y est pas du tout obligé. C'est juste une bonne pratique parce que c'est utile dans tout un tas de cas d'usage.
Même sur W$$ où les gens avaient l'habitude de tout entasser dans C:, c'est devenu un bonne pratique d'avoir au moins C: pour le système et D: pour les données utilisateur.
Alors c'est dire, si c'est même une bonne pratique sur W$$, aucune raison de t'en priver ailleurs.
Mais bien sûr, tu peux aussi tout installer en une seule partition, ça fonctionne parfaitement si c'est ce que tu souhaites.
Dernière modification par Zakhar (Le 21/01/2019, à 20:16)
"A computer is like air conditioning: it becomes useless when you open windows." (Linus Torvald)
Hors ligne
#6 Le 21/01/2019, à 20:23
- lucmars
Re : Pourquoi partitionner ?
Bonjour.
Pourquoi partitionner son disque si on fait des sauvegardes quotidiennes et automatiques, et si l'on ne veut qu'un seul système d'exploitation.
Merci.
En gras, ce que te propose Malbo en #2 est un plus dans une procédure de sauvegarde.
À comprendre : sauver ses données est essentiel; sauver son système seul est un plus.
Gaulois Matter !
Hors ligne
#7 Le 06/02/2019, à 17:55
- Lolotte22
Re : Pourquoi partitionner ?
Merci pour vos réponses !
J'ai installé ubuntu. Il fonctionne.
Mais, à l'installation on ne m'a pas de demander de partitionner. Donc je ne sais pas ce qui est alloué au système, non plus à mes fichiers perso, ni même à une potentielle swap.
Où et comment je peux zyeuter s'taffaire ?
Merci.
Hors ligne
#8 Le 06/02/2019, à 18:04
- malbo
Re : Pourquoi partitionner ?
Bonjour,
Pour qu'on puisse te répondre, je te prie de faire un Boot-Info depuis une session de ton Ubuntu installé et de donner l'URL de ce Boot-Info dans ta réponse.
Pour l'installation de Boot-Info, tu suivras les indications du sous-paragraphe 1.1.1 Cas où au moins un ubuntu installé sur disque est opérationnel
Et pour l'utilisation, tu suivras le paragraphe 1.2 Utilisation
Dernière modification par malbo (Le 06/02/2019, à 18:08)
Hors ligne
#9 Le 08/02/2019, à 19:27
- Lolotte22
Re : Pourquoi partitionner ?
Bonjour
oui j'ai fait un copier collé de la commande "si ubuntu est fonctionnel" dans le terminal, puis après ? quelle opération ?
Merci
Dernière modification par Lolotte22 (Le 08/02/2019, à 19:28)
Hors ligne
#10 Le 08/02/2019, à 20:32
- malbo
Re : Pourquoi partitionner ?
oui j'ai fait un copier collé de la commande "si ubuntu est fonctionnel" dans le terminal, puis après ?
Il faut presser la touche Entrée du clavier pour valider cette commande.
Dernière modification par malbo (Le 08/02/2019, à 20:32)
Hors ligne
#11 Le 09/02/2019, à 16:31
- Lolotte22
Re : Pourquoi partitionner ?
Bonjour
Oui bien sûr. Quantité de choses se sont inscrites. Une boite de dialogue est apparue sur mon bureau "boot-info", Ai cliqué sur ""rapport en ligne", Ai obtenu une url, dois-je la coller ici ?
Merci.
Dernière modification par Lolotte22 (Le 09/02/2019, à 16:32)
Hors ligne
#12 Le 09/02/2019, à 16:41
- malbo
Re : Pourquoi partitionner ?
Ai obtenu une url, dois-je la coller ici ?
Oui, colle seulement l'URL moi je m'occuperai de coller ensuite le rapport complet.
EDIT : par exemple, dans ce fil : https://forum.ubuntu-fr.org/viewtopic.php?id=2036547
bsyl 49 a donné l'URL dans le post #1 et moi j'ai collé le rapport dans le post #2.
Dernière modification par malbo (Le 09/02/2019, à 16:43)
Hors ligne
#13 Le 09/02/2019, à 18:04
- Lolotte22
Re : Pourquoi partitionner ?
Hors ligne
#14 Le 09/02/2019, à 19:18
- malbo
Re : Pourquoi partitionner ?
Ton Boot-Info est là :
Boot Info Script 8f991e4 + Boot-Repair extra info [Boot-Info 25oct2017]
============================= Boot Info Summary: ===============================
=> No boot loader is installed in the MBR of /dev/sda.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /EFI/ubuntu/grub.cfg /EFI/BOOT/fbx64.efi
/EFI/ubuntu/fwupx64.efi /EFI/ubuntu/grubx64.efi
/EFI/ubuntu/mmx64.efi /EFI/ubuntu/shimx64.efi
sda2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 18.04.1 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 1,953,525,167 1,953,525,167 ee GPT
GUID Partition Table detected.
Partition Attrs Start Sector End Sector # of Sectors System
/dev/sda1 2,048 1,050,623 1,048,576 EFI System partition
/dev/sda2 1,050,624 1,953,523,711 1,952,473,088 Data partition (Linux)
Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/loop1 squashfs
/dev/loop10 squashfs
/dev/loop11 squashfs
/dev/loop12 squashfs
/dev/loop13 squashfs
/dev/loop2 squashfs
/dev/loop3 squashfs
/dev/loop4 squashfs
/dev/loop5 squashfs
/dev/loop6 squashfs
/dev/loop7 squashfs
/dev/loop8 squashfs
/dev/loop9 squashfs
/dev/sda1 4F58-859F vfat
/dev/sda2 5c8bb025-0938-41b6-817e-b11dc961cbe0 ext4
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Feb 8 22:35 ata-WDC_WD10SPZX-00Z10T0_WD-WX41A78N6ST3 -> ../../sda
lrwxrwxrwx 1 root root 10 Feb 8 22:35 ata-WDC_WD10SPZX-00Z10T0_WD-WX41A78N6ST3-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Feb 8 22:35 ata-WDC_WD10SPZX-00Z10T0_WD-WX41A78N6ST3-part2 -> ../../sda2
lrwxrwxrwx 1 root root 9 Feb 8 22:35 wwn-0x50014ee21041b279 -> ../../sda
lrwxrwxrwx 1 root root 10 Feb 8 22:35 wwn-0x50014ee21041b279-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Feb 8 22:35 wwn-0x50014ee21041b279-part2 -> ../../sda2
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda1 /boot/efi vfat (rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/sda2 / ext4 (rw,relatime,errors=remount-ro,data=ordered)
========================== sda1/EFI/ubuntu/grub.cfg: ===========================
--------------------------------------------------------------------------------
search.fs_uuid 5c8bb025-0938-41b6-817e-b11dc961cbe0 root hd0,gpt2
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg
--------------------------------------------------------------------------------
=========================== sda2/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 5c8bb025-0938-41b6-817e-b11dc961cbe0
else
search --no-floppy --fs-uuid --set=root 5c8bb025-0938-41b6-817e-b11dc961cbe0
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=hidden
set timeout=10
# Fallback hidden-timeout code in case the timeout_style feature is
# unavailable.
elif sleep --interruptible 10 ; then
set timeout=0
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=1
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-5c8bb025-0938-41b6-817e-b11dc961cbe0' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 5c8bb025-0938-41b6-817e-b11dc961cbe0
else
search --no-floppy --fs-uuid --set=root 5c8bb025-0938-41b6-817e-b11dc961cbe0
fi
linux /boot/vmlinuz-4.15.0-29-generic root=UUID=5c8bb025-0938-41b6-817e-b11dc961cbe0 ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.15.0-29-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-5c8bb025-0938-41b6-817e-b11dc961cbe0' {
menuentry 'Ubuntu, avec Linux 4.15.0-29-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-29-generic-advanced-5c8bb025-0938-41b6-817e-b11dc961cbe0' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 5c8bb025-0938-41b6-817e-b11dc961cbe0
else
search --no-floppy --fs-uuid --set=root 5c8bb025-0938-41b6-817e-b11dc961cbe0
fi
echo 'Chargement de Linux 4.15.0-29-generic…'
linux /boot/vmlinuz-4.15.0-29-generic root=UUID=5c8bb025-0938-41b6-817e-b11dc961cbe0 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.15.0-29-generic
}
menuentry 'Ubuntu, with Linux 4.15.0-29-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-29-generic-recovery-5c8bb025-0938-41b6-817e-b11dc961cbe0' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 5c8bb025-0938-41b6-817e-b11dc961cbe0
else
search --no-floppy --fs-uuid --set=root 5c8bb025-0938-41b6-817e-b11dc961cbe0
fi
echo 'Chargement de Linux 4.15.0-29-generic…'
linux /boot/vmlinuz-4.15.0-29-generic root=UUID=5c8bb025-0938-41b6-817e-b11dc961cbe0 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.15.0-29-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda2/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda2 during installation
UUID=5c8bb025-0938-41b6-817e-b11dc961cbe0 / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda1 during installation
UUID=4F58-859F /boot/efi vfat umask=0077 0 1
/swapfile none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda2: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
500.647624969 = 537.566294016 boot/grub/grub.cfg 2
500.641826630 = 537.560068096 boot/vmlinuz-4.15.0-29-generic 1
500.641826630 = 537.560068096 vmlinuz 1
261.176151276 = 280.435757056 boot/initrd.img-4.15.0-29-generic 2
261.176151276 = 280.435757056 initrd.img 2
261.176151276 = 280.435757056 initrd.img.old 2
ADDITIONAL INFORMATION :
=================== log of boot-info 20190208_2235 ===================
boot-info version : 4ppa65
boot-sav version : 4ppa65
boot-sav-extra version : 4ppa65
glade2script version : 3.2.3~ppa4
boot-info is executed in installed-session (Ubuntu 18.04.1 LTS, bionic, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-4.15.0-29-generic root=UUID=5c8bb025-0938-41b6-817e-b11dc961cbe0 ro quiet splash vt.handoff=1
=================== os-prober:
/dev/sda2:L'OS actuellement utilisé - Ubuntu 18.04.1 LTS CurrentSession:linux
=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/loop1: TYPE="squashfs"
/dev/loop2: TYPE="squashfs"
/dev/loop3: TYPE="squashfs"
/dev/loop4: TYPE="squashfs"
/dev/loop5: TYPE="squashfs"
/dev/loop6: TYPE="squashfs"
/dev/loop7: TYPE="squashfs"
/dev/sda1: UUID="4F58-859F" TYPE="vfat" PARTLABEL="EFI System Partition" PARTUUID="dc60ff30-1c13-46ad-9398-db0f388ccc4b"
/dev/sda2: UUID="5c8bb025-0938-41b6-817e-b11dc961cbe0" TYPE="ext4" PARTUUID="7d96d3e7-d71a-4d07-9d50-7ead42e57a1c"
/dev/loop8: TYPE="squashfs"
/dev/loop9: TYPE="squashfs"
/dev/loop10: TYPE="squashfs"
/dev/loop11: TYPE="squashfs"
/dev/loop12: TYPE="squashfs"
/dev/loop13: TYPE="squashfs"
1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
=================== /etc/grub.d/ :
drwxr-xr-x 2 root root 4096 juil. 25 2018 grub.d
total 80
-rwxr-xr-x 1 root root 9783 juil. 17 2018 00_header
-rwxr-xr-x 1 root root 6258 juil. 16 2018 05_debian_theme
-rwxr-xr-x 1 root root 12693 juil. 17 2018 10_linux
-rwxr-xr-x 1 root root 11298 juil. 17 2018 20_linux_xen
-rwxr-xr-x 1 root root 1992 janv. 28 2016 20_memtest86+
-rwxr-xr-x 1 root root 12059 juil. 17 2018 30_os-prober
-rwxr-xr-x 1 root root 1418 juil. 17 2018 30_uefi-firmware
-rwxr-xr-x 1 root root 214 juil. 17 2018 40_custom
-rwxr-xr-x 1 root root 216 juil. 17 2018 41_custom
-rw-r--r-- 1 root root 483 juil. 17 2018 README
=================== /etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
/boot/efi detected in the fstab of sda2: UUID=4F58-859F (sda1)
Presence of EFI/Boot file detected: /boot/efi/EFI/Boot/fbx64.efi
/usr/share/boot-sav/bs-cmd_terminal.sh: ligne 179: avertissement : command substitution: ignored null byte in input
=================== efibootmgr -v
BootNext: 0000
BootCurrent: 000A
Timeout: 0 seconds
BootOrder: 000A,000D,000E,000B,000C,0000,0001,0002,0003,0004,0005,0006,0007,0008,0009,000F,0010
Boot0000 Startup Menu FvVol(a881d567-6cb0-4eee-8435-2e72d33e45b5)/FvFile(9d8243e8-8381-453d-aceb-c350ee7757ca)....ISPH
Boot0001 System Information FvVol(a881d567-6cb0-4eee-8435-2e72d33e45b5)/FvFile(9d8243e8-8381-453d-aceb-c350ee7757ca)......ISPH
Boot0002 Bios Setup FvVol(a881d567-6cb0-4eee-8435-2e72d33e45b5)/FvFile(9d8243e8-8381-453d-aceb-c350ee7757ca)......ISPH
Boot0003 3rd Party Option ROM Management FvVol(a881d567-6cb0-4eee-8435-2e72d33e45b5)/FvFile(9d8243e8-8381-453d-aceb-c350ee7757ca)......ISPH
Boot0004 System Diagnostics FvVol(a881d567-6cb0-4eee-8435-2e72d33e45b5)/FvFile(9d8243e8-8381-453d-aceb-c350ee7757ca)......ISPH
Boot0005 System Diagnostics FvVol(a881d567-6cb0-4eee-8435-2e72d33e45b5)/FvFile(9d8243e8-8381-453d-aceb-c350ee7757ca)......ISPH
Boot0006 System Diagnostics FvVol(a881d567-6cb0-4eee-8435-2e72d33e45b5)/FvFile(9d8243e8-8381-453d-aceb-c350ee7757ca)......ISPH
Boot0007 System Diagnostics FvVol(a881d567-6cb0-4eee-8435-2e72d33e45b5)/FvFile(9d8243e8-8381-453d-aceb-c350ee7757ca)......ISPH
Boot0008 Boot Menu FvVol(a881d567-6cb0-4eee-8435-2e72d33e45b5)/FvFile(9d8243e8-8381-453d-aceb-c350ee7757ca)......ISPH
Boot0009 HP Recovery FvVol(a881d567-6cb0-4eee-8435-2e72d33e45b5)/FvFile(9d8243e8-8381-453d-aceb-c350ee7757ca)......ISPH
Boot000A* ubuntu HD(1,GPT,dc60ff30-1c13-46ad-9398-db0f388ccc4b,0x800,0x100000)/File(EFIubuntushimx64.efi)....ISPH
Boot000B* WDC WD10SPZX-00Z10T0 : BBS(HD,WDC WD10SPZX-00Z10T0 : ,0x400)/PciRoot(0x0)/Pci(0x17,0x0)/Sata(0,0,0)......ISPH
Boot000C* Intel Corporation: Realtek PXE B01 D00 BBS(Network,Intel Corporation: Realtek PXE B01 D00,0x0)/PciRoot(0x0)/Pci(0x1c,0x0)/Pci(0x0,0x0)......ISPH
Boot000D USB: PciRoot(0x0)/Pci(0x14,0x0)N.....YM....R,Y.....ISPH
Boot000E USB: BBS(65535,,0x0)/PciRoot(0x0)/Pci(0x14,0x0)......ISPH
Boot000F Network Boot FvVol(a881d567-6cb0-4eee-8435-2e72d33e45b5)/FvFile(9d8243e8-8381-453d-aceb-c350ee7757ca)......ISPH
Boot0010 Gestion tierce de la ROM optionnelle FvVol(a881d567-6cb0-4eee-8435-2e72d33e45b5)/FvFile(9d8243e8-8381-453d-aceb-c350ee7757ca)......ISPH
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.
No EFI in dmseg.
SecureBoot disabled. (maybe sec-boot, Veuillez indiquer ce message à boot.repair@gmail.com)
=================== PARTITIONS & DISKS:
sda2 : sda, not-sepboot, grubenv-ok grub2, signed grub-pc grub-efi , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, notbiosboot, .
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, is-correct-EFI, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, notbiosboot, /boot/efi.
sda : GPT, no-BIOS_boot, has-correctEFI, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
=================== parted -lm:
BYT;
/dev/sda:1000GB:scsi:512:4096:gpt:ATA WDC WD10SPZX-00Z:;
1:1049kB:538MB:537MB:fat32:EFI System Partition:boot, esp;
2:538MB:1000GB:1000GB:ext4::;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL
loop0 loop squashfs 14,5M
loop1 loop squashfs 86,9M
loop2 loop squashfs 3,7M
loop3 loop squashfs 13M
loop4 loop squashfs 14,5M
loop5 loop squashfs 2,3M
loop6 loop squashfs 3,7M
loop7 loop squashfs 91M
loop8 loop squashfs 140,9M
loop9 loop squashfs 2,3M
loop10 loop squashfs 34,7M
loop11 loop squashfs 13M
loop12 loop squashfs 34,6M
loop13 loop squashfs 140,7M
sda disk 931,5G
sda1 part vfat 512M
sda2 part ext4 931G
KNAME ROTA RO RM STATE MOUNTPOINT
loop0 1 1 0 /snap/gnome-logs/37
loop1 1 1 0 /snap/core/4917
loop2 1 1 0 /snap/gnome-system-monitor/51
loop3 1 1 0 /snap/gnome-characters/103
loop4 1 1 0 /snap/gnome-logs/45
loop5 1 1 0 /snap/gnome-calculator/260
loop6 1 1 0 /snap/gnome-system-monitor/57
loop7 1 1 0 /snap/core/6350
loop8 1 1 0 /snap/gnome-3-26-1604/70
loop9 1 1 0 /snap/gnome-calculator/180
loop10 1 1 0 /snap/gtk-common-themes/319
loop11 1 1 0 /snap/gnome-characters/139
loop12 1 1 0 /snap/gtk-common-themes/818
loop13 1 1 0 /snap/gnome-3-26-1604/74
sda 1 0 0 running
sda1 1 0 0 /boot/efi
sda2 1 0 0 /
=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=4000952k,nr_inodes=1000238,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=806096k,mode=755)
/dev/sda2 on / type ext4 (rw,relatime,errors=remount-ro,data=ordered)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/unified type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
efivarfs on /sys/firmware/efi/efivars type efivarfs (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/rdma type cgroup (rw,nosuid,nodev,noexec,relatime,rdma)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=28,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=3029)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
mqueue on /dev/mqueue type mqueue (rw,relatime)
configfs on /sys/kernel/config type configfs (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
/var/lib/snapd/snaps/gnome-characters_103.snap on /snap/gnome-characters/103 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-calculator_260.snap on /snap/gnome-calculator/260 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/core_6350.snap on /snap/core/6350 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-3-26-1604_70.snap on /snap/gnome-3-26-1604/70 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-logs_45.snap on /snap/gnome-logs/45 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-system-monitor_57.snap on /snap/gnome-system-monitor/57 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-characters_139.snap on /snap/gnome-characters/139 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-logs_37.snap on /snap/gnome-logs/37 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gtk-common-themes_818.snap on /snap/gtk-common-themes/818 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-3-26-1604_74.snap on /snap/gnome-3-26-1604/74 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/core_4917.snap on /snap/core/4917 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-calculator_180.snap on /snap/gnome-calculator/180 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-system-monitor_51.snap on /snap/gnome-system-monitor/51 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gtk-common-themes_319.snap on /snap/gtk-common-themes/319 type squashfs (ro,nodev,relatime,x-gdu.hide)
/dev/sda1 on /boot/efi type vfat (rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=806092k,mode=700,uid=1000,gid=1000)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro sda1 sda2 size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus char console core cpu cpu_dma_latency cuse disk dri drm_dp_aux0 drm_dp_aux1 ecryptfs fb0 fd freefall full fuse hpet hugepages hwrng i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 initctl input kmsg lightnvm log mapper mcelog media0 mei0 mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sg0 shm snapshot snd stderr stdin stdout uhid uinput urandom userio v4l vfio vga_arbiter vhci vhost-net vhost-vsock video0 zero
ls /dev/mapper: control
=================== hexdump -n512 -C /dev/sda1
00000000 eb 58 90 6d 6b 66 73 2e 66 61 74 00 02 08 20 00 |.X.mkfs.fat... .|
00000010 02 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 10 00 00 04 00 00 00 00 00 00 02 00 00 00 |................|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 01 29 9f 85 58 4f 4e 4f 20 4e 41 4d 45 20 20 |..)..XONO NAME |
00000050 20 20 46 41 54 33 32 20 20 20 0e 1f be 77 7c ac | FAT32 ...w|.|
00000060 22 c0 74 0b 56 b4 0e bb 07 00 cd 10 5e eb f0 32 |".t.V.......^..2|
00000070 e4 cd 16 cd 19 eb fe 54 68 69 73 20 69 73 20 6e |.......This is n|
00000080 6f 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 64 69 |ot a bootable di|
00000090 73 6b 2e 20 20 50 6c 65 61 73 65 20 69 6e 73 65 |sk. Please inse|
000000a0 72 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 66 6c |rt a bootable fl|
000000b0 6f 70 70 79 20 61 6e 64 0d 0a 70 72 65 73 73 20 |oppy and..press |
000000c0 61 6e 79 20 6b 65 79 20 74 6f 20 74 72 79 20 61 |any key to try a|
000000d0 67 61 69 6e 20 2e 2e 2e 20 0d 0a 00 00 00 00 00 |gain ... .......|
000000e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
udev devtmpfs 3.9G 0 3.9G 0% /dev
tmpfs tmpfs 788M 1.8M 786M 1% /run
/dev/sda2 ext4 916G 7.9G 861G 1% /
tmpfs tmpfs 3.9G 31M 3.9G 1% /dev/shm
tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock
tmpfs tmpfs 3.9G 0 3.9G 0% /sys/fs/cgroup
/dev/loop3 squashfs 13M 13M 0 100% /snap/gnome-characters/103
/dev/loop5 squashfs 2.3M 2.3M 0 100% /snap/gnome-calculator/260
/dev/loop7 squashfs 91M 91M 0 100% /snap/core/6350
/dev/loop8 squashfs 141M 141M 0 100% /snap/gnome-3-26-1604/70
/dev/loop4 squashfs 15M 15M 0 100% /snap/gnome-logs/45
/dev/loop6 squashfs 3.8M 3.8M 0 100% /snap/gnome-system-monitor/57
/dev/loop11 squashfs 13M 13M 0 100% /snap/gnome-characters/139
/dev/loop0 squashfs 15M 15M 0 100% /snap/gnome-logs/37
/dev/loop12 squashfs 35M 35M 0 100% /snap/gtk-common-themes/818
/dev/loop13 squashfs 141M 141M 0 100% /snap/gnome-3-26-1604/74
/dev/loop1 squashfs 87M 87M 0 100% /snap/core/4917
/dev/loop9 squashfs 2.4M 2.4M 0 100% /snap/gnome-calculator/180
/dev/loop2 squashfs 3.8M 3.8M 0 100% /snap/gnome-system-monitor/51
/dev/loop10 squashfs 35M 35M 0 100% /snap/gtk-common-themes/319
/dev/sda1 vfat 511M 4.7M 507M 1% /boot/efi
tmpfs tmpfs 788M 32K 788M 1% /run/user/1000
=================== fdisk -l:
Disk /dev/loop0: 14.5 MiB, 15196160 bytes, 29680 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop1: 86.9 MiB, 91099136 bytes, 177928 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop2: 3.7 MiB, 3887104 bytes, 7592 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop3: 13 MiB, 13619200 bytes, 26600 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop4: 14.5 MiB, 15208448 bytes, 29704 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop5: 2.3 MiB, 2355200 bytes, 4600 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop6: 3.7 MiB, 3878912 bytes, 7576 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop7: 91 MiB, 95408128 bytes, 186344 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: 266E48D3-54E6-40C4-A4D0-B65E718978DF
Device Start End Sectors Size Type
/dev/sda1 2048 1050623 1048576 512M EFI System
/dev/sda2 1050624 1953523711 1952473088 931G Linux filesystem
Disk /dev/loop8: 140.9 MiB, 147722240 bytes, 288520 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop9: 2.3 MiB, 2433024 bytes, 4752 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop10: 34.7 MiB, 36323328 bytes, 70944 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop11: 13 MiB, 13619200 bytes, 26600 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop12: 34.6 MiB, 36216832 bytes, 70736 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop13: 140.7 MiB, 147496960 bytes, 288080 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub-efi-amd64-signed of sda2, using the following options: sda1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s use-standard-efi-file
=================== Final advice in case of suggested repair
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le fichier sda1/efi/.../grub*.efi !
=================== User settings
The settings chosen by the user will not act on the boot.
Pour moi, ton installation est parfaitement réussie.
Je te recommande de faire tes mises à jour parce que je vois que le noyau utilisé est 4.15.0-29 alors qu'il existe un noyau plus récent (4.15.0-45). Pour ce faire, tu peux utiliser le gestionnaire de mises à jour.
Dernière modification par malbo (Le 09/02/2019, à 19:22)
Hors ligne
#15 Le 10/02/2019, à 21:52
- Lolotte22
Re : Pourquoi partitionner ?
@ malbo Merci pour tout !
Hors ligne
#16 Le 10/02/2019, à 22:02
- malbo
Re : Pourquoi partitionner ?
Bonsoir,
Je te prie de fermer la discussion en procédant comme suit :
1) te connecter sur le forum
2) cliquer sur "Modifier" en bas à droite de ton PREMIER post
3) modifier le titre de la discussion pour qu'il devienne :
[Résolu] Pourquoi partitionner ?
Hors ligne