#1 Le 24/04/2019, à 21:45
- Lisandre
ouverture impossible apres mise a jour [ABANDON]
Bonjour,
j'ai un gros souci qui vient d’apparaître après une mise à jour son mon petit eepc portable. Ubuntu 14LTS.
Au redémarrage après une mise à jour au lieu de s'ouvrir directement sur mon bureau, comme depuis des années, il me demande un mot de passe utilisateur. Mais je n'ai pas de mot de passe utilisateur ! Je tape le mot de passe Root : rien. Deuxième profil : idem. Même en invité il ne me laisse pas rentrer.
J'ai cherché un peu... Une tentative avec ctrl alt f1, mais ça change rien...
A l'aide... Merci beaucoup.
Dernière modification par Lisandre (Le 06/05/2019, à 11:50)
Ubuntu 14.04 LTS 64 bits
3.9 Gio de ram dual mode
Proc : AMD Phenom(tm) 8650 Triple-Core Processor × 3
Carte graphique : Radeon HD 7750
Hors ligne
#2 Le 25/04/2019, à 09:11
- TheSun
Re : ouverture impossible apres mise a jour [ABANDON]
il me demande un mot de passe utilisateur. Mais je n'ai pas de mot de passe utilisateur !
Impossible ! il ne peux pas ne pas avoir de mot de passe associé à un compte utilisateur sous linux !
(pas de mot de passe sous linux signifie : compte désactivé)
Je pense que tu fais une confusion avec le mode "connexion automatique" proposé par Ubuntu que tu avais probablement activé, ce mode permet de ne pas resaisir le mot de passe de ton compte à chaque fois que tu démarres le pc (connexion automatique au bureau) mais ça ne veux pas dire que tu n'a plus de mot de passe, ton compte à obligatoirement un mot de passe associé. D'ailleurs pour effectuer des taches d'administrations avec sudo, tu es bien obligé de taper ton mot de passe.
Et tu es toujours en 14.04 actuellement ?
#3 Le 25/04/2019, à 09:31
- malbo
Re : ouverture impossible apres mise a jour [ABANDON]
après une mise à jour son mon petit eepc portable
Bonjour,
C'est quoi le nom complet du modèle ?
Hors ligne
#4 Le 25/04/2019, à 12:19
- Lisandre
Re : ouverture impossible apres mise a jour [ABANDON]
Bonjour et merci pour vos réponses.
Je vais reprendre plus en détail et point par point.
- C'est eepc 1215B.
- Je suis toujours sous ubuntu 14 sur mes différentes machines. (je vais changer mais c'est un autre débat)
- Avant de faire la mise à jour, pour un problème de place sur la partition racine, j'ai fait de la place dans le "lib" avec Kclean.
- Au redémarrage il me propose la fenêtre de login, alors que ça n'avait jamais été le cas.
- Si je tape un mot de passe incorrect il me le dit : incorrect, et attend une autre proposition.
- Si je tape le mot de passe que j'utilise pour les "sudo", il passe en fenêtre noire, il réfléchit, fait apparaître le curseur de la souris, puis revient à la fenêtre de login.
- Si je passe par la cession invité : idem, passage au noir, souris, retour login.
Voilà...
Encore merci pour votre aide.
Ubuntu 14.04 LTS 64 bits
3.9 Gio de ram dual mode
Proc : AMD Phenom(tm) 8650 Triple-Core Processor × 3
Carte graphique : Radeon HD 7750
Hors ligne
#5 Le 25/04/2019, à 14:36
- LukePerp
Re : ouverture impossible apres mise a jour [ABANDON]
Bonjour,
Tu sembles avoir fait trop de ménage avec Kclean aie. Si tu arrives à accéder à la ligne e commande, tapes ceci pour réparer les paquets :
sudo dpkg --configure -a ; sudo apt-get install -fy ; sudo apt-get autoclean ; sudo apt-get autoremove --purge -y ; sudo apt update ; sudo apt full-upgrade -y
Desktop & Laptop - Ubuntu Mate dernière LTS - Intel i5 - 16 Go - Dual boot Windows offline
Hors ligne
#6 Le 25/04/2019, à 18:51
- Lisandre
Re : ouverture impossible apres mise a jour [ABANDON]
Merci Luke, mais comment accéder à une console ?
Le plus étrange, c'est qu'il passe au noir, comme pour ouvrir le bureau, et puis toc il revient au login...
Il ne dit pas "mot de passe incorrect"...
Ubuntu 14.04 LTS 64 bits
3.9 Gio de ram dual mode
Proc : AMD Phenom(tm) 8650 Triple-Core Processor × 3
Carte graphique : Radeon HD 7750
Hors ligne
#7 Le 25/04/2019, à 19:36
- malbo
Re : ouverture impossible apres mise a jour [ABANDON]
Peux-tu essayer de démarrer sur un noyau précédent ?
Hors ligne
#8 Le 25/04/2019, à 20:00
- Lisandre
Re : ouverture impossible apres mise a jour [ABANDON]
Peux-tu essayer de démarrer sur un noyau précédent ?
oui je veux bien essayer, mais comment ?
Je dois booter sur une clef c'est ça ?
Pardon mais je suis un peu perdu... J'ai l'impression de n'avoir accès à rien...
Ubuntu 14.04 LTS 64 bits
3.9 Gio de ram dual mode
Proc : AMD Phenom(tm) 8650 Triple-Core Processor × 3
Carte graphique : Radeon HD 7750
Hors ligne
#9 Le 25/04/2019, à 20:06
- xubu1957
Re : ouverture impossible apres mise a jour [ABANDON]
Bonjour,
Tu as ce conseil :
Démarrer sur un noyau précédent
- redémarre en tapotant les touches Majuscules ou Echap
- à l'apparition du menu de grub, descends avec la flèche bas, sur la ligne :Linux previous versions
ou
Advanced options for Ubuntu
- valide
- choisis un noyau autre que le plus récent.
- valide et laisse le pc poursuivre son démarrage.
(edit=ou ECHAP)
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
Hors ligne
#10 Le 25/04/2019, à 21:55
- Lisandre
Re : ouverture impossible apres mise a jour [ABANDON]
Merci Xubu, ca offre pas mal de possibilités !
Je vais tripatouiller là dedans.
Merci.
Ubuntu 14.04 LTS 64 bits
3.9 Gio de ram dual mode
Proc : AMD Phenom(tm) 8650 Triple-Core Processor × 3
Carte graphique : Radeon HD 7750
Hors ligne
#11 Le 25/04/2019, à 22:19
- Lisandre
Re : ouverture impossible apres mise a jour [ABANDON]
Bon... J'ai tenter de redémarrer sur tous les anciens noyaux : idem.
bloqué sur la fenêtre login
j'ai essayé en recovry mode, j'ai essayé la ligne de Luke... bcp de messages d'erreurs...
et au final idem.
j'ai essayé le mode réparer les paquets, ca a bien fonctionné.
mais au final idem.
Merci en tout cas, j'ai avancé.
Mais c'est toujours bloqué.
Ubuntu 14.04 LTS 64 bits
3.9 Gio de ram dual mode
Proc : AMD Phenom(tm) 8650 Triple-Core Processor × 3
Carte graphique : Radeon HD 7750
Hors ligne
#12 Le 26/04/2019, à 05:22
- malbo
Re : ouverture impossible apres mise a jour [ABANDON]
Bonjour,
Depuis une session live de Ubuntu (14.04 ou 16.04 ou 18.04), je te prie de faire un Boot-Info et de donner l'URL de ce Boot-Info dans ta réponse.
Hors ligne
#13 Le 26/04/2019, à 07:00
- moko138
Re : ouverture impossible apres mise a jour [ABANDON]
Ubuntu 14LTS. Au redémarrage après une mise à jour au lieu de s'ouvrir directement sur mon bureau, comme depuis des années, il me demande un mot de passe utilisateur. (...)
bloqué sur la fenêtre login
Ça sent la mise à niveau avec changement de gestionnaire de connexion (passage de lightdm à gdm).
Et possible partition pleine.
= =
.
en recovery mode, j'ai essayé la ligne de Luke... bcp de messages d'erreurs...
Les messages d'erreurs sont une mine d'infos.
À l'avenir, pense à les photographier pour les partager si, comme ici, tu ne peux pas les copier-coller.
Nous attendons l'url du boot-info que malbo t'a demandé.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#14 Le 26/04/2019, à 07:22
- malbo
Re : ouverture impossible apres mise a jour [ABANDON]
@moko138 : je suis inquiet comme LukePerp par cette mention du post #4 : "Avant de faire la mise à jour, pour un problème de place sur la partition racine, j'ai fait de la place dans le "lib" avec Kclean". Moi je n'utilise pas Kclean mais j'imagine qu'on doit pouvoir en faire trop avec cet outil...
Hors ligne
#15 Le 26/04/2019, à 09:12
- Lisandre
Re : ouverture impossible apres mise a jour [ABANDON]
Bonjour et merci.
Je vais essayer cela dans la journée. Fin de semaine pas facile au boulot.
Et il faut un peu de temps pour que je me replonge dans le live usb, ça me donnera l'occasion de tester l'ubuntu 18.
En ce qui concerne Kclean, je l'avais déjà utilisé sur mon gros, et ça c'est très bien passé. Il ne fait que supprimer les vieux vieux kernels, (d'après ce que j'ai compris), et il en reste au moins trois en archive. Là j’ai peut être fait un cocktail trop puissant, car je l'avais pas mis a jour depuis fort longtemps, donc kclean plus grosse mise a jour...
enfin bref : merci et une excellente joournée à vous.
Je reviendrai avec un boot-info.
Ubuntu 14.04 LTS 64 bits
3.9 Gio de ram dual mode
Proc : AMD Phenom(tm) 8650 Triple-Core Processor × 3
Carte graphique : Radeon HD 7750
Hors ligne
#16 Le 26/04/2019, à 13:55
- Lisandre
Re : ouverture impossible apres mise a jour [ABANDON]
a la pause j'ai vite refait les commandes de Luke en console sur un noyau précédent en recovry mode, pour noter quelques erreurs.
à upgrade -f :
W : verrou non utilisé pour le fichier /var/lib/dpkg/lock en lecture seule
E : impossible d'écrire su /var/cache/apt
E : les listes de paquets ou le fichier "status" ne peuvent etre analysés ou lus
à configure -a :
erreur : impossible d’accéder au répertoire administratif de dpkg : système de fichiers accessible en lecture seulement.
à autoremove --purge -y :
E : impossible d'écrire su /var/cache/apt
E : les listes de paquets ou le fichier "status" ne peuvent etre analysés ou lus
Ubuntu 14.04 LTS 64 bits
3.9 Gio de ram dual mode
Proc : AMD Phenom(tm) 8650 Triple-Core Processor × 3
Carte graphique : Radeon HD 7750
Hors ligne
#17 Le 29/04/2019, à 00:20
- Lisandre
Re : ouverture impossible apres mise a jour [ABANDON]
Voilà. Je l'ai.
Je le présente juste ainsi ?
http://paste.ubuntu.com/p/qbT6y4y3d7/
Ubuntu 14.04 LTS 64 bits
3.9 Gio de ram dual mode
Proc : AMD Phenom(tm) 8650 Triple-Core Processor × 3
Carte graphique : Radeon HD 7750
Hors ligne
#18 Le 29/04/2019, à 07:38
- malbo
Re : ouverture impossible apres mise a jour [ABANDON]
Bonjour,
Oui, c'est bien ce qui était demandé. Comme ça, je peux le coller proprement ci-dessous :
Boot Info Script 8f991e4 + Boot-Repair extra info [Boot-Info 25oct2017]
============================= Boot Info Summary: ===============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos2)/boot/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_msdos biosdisk
---------------------------------------------------------------------------
=> Syslinux MBR (4.04-4.07) is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: Grub2 (v1.99-2.00)
Boot sector info: Grub2 (v2.00) is installed in the boot sector of sda1
and looks at sector 48361152 of the same hard drive
for core.img. core.img is at this location and looks
for (,msdos2)/boot/grub. It also embeds following
components:
modules
-------------------------------------------------------
fshelp ext2 part_msdos biosdisk
-------------------------------------------------------
-------------------------. According to the info in
the boot sector, sda1 starts at sector 0. But
according to the info from fdisk, sda1 starts at
sector 2048.
Operating System:
Boot files:
sda2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 14.04.5 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/extlinux/extlinux.conf
/boot/grub/i386-pc/core.img
sda3: __________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdb1: __________________________________________________________________________
File system: vfat
Boot sector type: SYSLINUX 4.05 20140113
Boot sector info: Syslinux looks at sector 4026820 of /dev/sdb1 for its
second stage. SYSLINUX is installed in the directory.
No errors found in the Boot Parameter Block.
Operating System:
Boot files: /boot/grub/grub.cfg /syslinux.cfg
/EFI/BOOT/grubx64.efi /ldlinux.sys
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 1,955,839 1,953,792 b W95 FAT32
/dev/sda2 1,955,840 967,002,111 965,046,272 83 Linux
/dev/sda3 967,004,158 976,771,071 9,766,914 5 Extended
/dev/sda5 967,004,160 976,771,071 9,766,912 82 Linux swap / Solaris
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 14.7 GiB, 15728640000 bytes, 30720000 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 48 30,719,999 30,719,952 c W95 FAT32 (LBA)
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/loop1 squashfs
/dev/loop2 squashfs
/dev/loop3 squashfs
/dev/loop4 squashfs
/dev/loop5 squashfs
/dev/loop6 squashfs
/dev/loop7 squashfs
/dev/sda1 7306-4EDA vfat
/dev/sda2 7a695794-1d19-456d-8fa8-684c92d1a3c4 ext4
/dev/sda5 bec93776-7ebf-4c5c-9954-2e7eb02fec1f swap
/dev/sdb1 C6AF-08B2 vfat Angie
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Apr 28 22:15 ata-ST9500325AS_6VESQA53 -> ../../sda
lrwxrwxrwx 1 root root 10 Apr 28 22:15 ata-ST9500325AS_6VESQA53-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Apr 28 22:15 ata-ST9500325AS_6VESQA53-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Apr 28 22:15 ata-ST9500325AS_6VESQA53-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Apr 28 22:15 ata-ST9500325AS_6VESQA53-part5 -> ../../sda5
lrwxrwxrwx 1 root root 9 Apr 28 22:15 usb-SMI_1000-0:0 -> ../../sdb
lrwxrwxrwx 1 root root 10 Apr 28 22:15 usb-SMI_1000-0:0-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 9 Apr 28 22:15 wwn-0x5000c500370eddfb -> ../../sda
lrwxrwxrwx 1 root root 10 Apr 28 22:15 wwn-0x5000c500370eddfb-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Apr 28 22:15 wwn-0x5000c500370eddfb-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Apr 28 22:15 wwn-0x5000c500370eddfb-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Apr 28 22:15 wwn-0x5000c500370eddfb-part5 -> ../../sda5
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sdb1 /cdrom vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
=========================== sda2/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 7a695794-1d19-456d-8fa8-684c92d1a3c4
else
search --no-floppy --fs-uuid --set=root 7a695794-1d19-456d-8fa8-684c92d1a3c4
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=hidden
set timeout=0
# Fallback hidden-timeout code in case the timeout_style feature is
# unavailable.
elif sleep --interruptible 0 ; then
set timeout=0
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-7a695794-1d19-456d-8fa8-684c92d1a3c4' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 7a695794-1d19-456d-8fa8-684c92d1a3c4
else
search --no-floppy --fs-uuid --set=root 7a695794-1d19-456d-8fa8-684c92d1a3c4
fi
linux /boot/vmlinuz-3.13.0-168-generic root=UUID=7a695794-1d19-456d-8fa8-684c92d1a3c4 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-168-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-7a695794-1d19-456d-8fa8-684c92d1a3c4' {
menuentry 'Ubuntu, avec Linux 3.13.0-168-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-168-generic-advanced-7a695794-1d19-456d-8fa8-684c92d1a3c4' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 7a695794-1d19-456d-8fa8-684c92d1a3c4
else
search --no-floppy --fs-uuid --set=root 7a695794-1d19-456d-8fa8-684c92d1a3c4
fi
echo 'Chargement de Linux 3.13.0-168-generic…'
linux /boot/vmlinuz-3.13.0-168-generic root=UUID=7a695794-1d19-456d-8fa8-684c92d1a3c4 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-168-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-168-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-168-generic-recovery-7a695794-1d19-456d-8fa8-684c92d1a3c4' {
recordfail
load_video
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 7a695794-1d19-456d-8fa8-684c92d1a3c4
else
search --no-floppy --fs-uuid --set=root 7a695794-1d19-456d-8fa8-684c92d1a3c4
fi
echo 'Chargement de Linux 3.13.0-168-generic…'
linux /boot/vmlinuz-3.13.0-168-generic root=UUID=7a695794-1d19-456d-8fa8-684c92d1a3c4 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-168-generic
}
menuentry 'Ubuntu, avec Linux 3.13.0-158-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-158-generic-advanced-7a695794-1d19-456d-8fa8-684c92d1a3c4' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 7a695794-1d19-456d-8fa8-684c92d1a3c4
else
search --no-floppy --fs-uuid --set=root 7a695794-1d19-456d-8fa8-684c92d1a3c4
fi
echo 'Chargement de Linux 3.13.0-158-generic…'
linux /boot/vmlinuz-3.13.0-158-generic root=UUID=7a695794-1d19-456d-8fa8-684c92d1a3c4 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-158-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-158-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-158-generic-recovery-7a695794-1d19-456d-8fa8-684c92d1a3c4' {
recordfail
load_video
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 7a695794-1d19-456d-8fa8-684c92d1a3c4
else
search --no-floppy --fs-uuid --set=root 7a695794-1d19-456d-8fa8-684c92d1a3c4
fi
echo 'Chargement de Linux 3.13.0-158-generic…'
linux /boot/vmlinuz-3.13.0-158-generic root=UUID=7a695794-1d19-456d-8fa8-684c92d1a3c4 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-158-generic
}
menuentry 'Ubuntu, avec Linux 3.13.0-153-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-153-generic-advanced-7a695794-1d19-456d-8fa8-684c92d1a3c4' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 7a695794-1d19-456d-8fa8-684c92d1a3c4
else
search --no-floppy --fs-uuid --set=root 7a695794-1d19-456d-8fa8-684c92d1a3c4
fi
echo 'Chargement de Linux 3.13.0-153-generic…'
linux /boot/vmlinuz-3.13.0-153-generic root=UUID=7a695794-1d19-456d-8fa8-684c92d1a3c4 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-153-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-153-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-153-generic-recovery-7a695794-1d19-456d-8fa8-684c92d1a3c4' {
recordfail
load_video
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 7a695794-1d19-456d-8fa8-684c92d1a3c4
else
search --no-floppy --fs-uuid --set=root 7a695794-1d19-456d-8fa8-684c92d1a3c4
fi
echo 'Chargement de Linux 3.13.0-153-generic…'
linux /boot/vmlinuz-3.13.0-153-generic root=UUID=7a695794-1d19-456d-8fa8-684c92d1a3c4 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-153-generic
}
menuentry 'Ubuntu, avec Linux 3.13.0-125-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-125-generic-advanced-7a695794-1d19-456d-8fa8-684c92d1a3c4' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 7a695794-1d19-456d-8fa8-684c92d1a3c4
else
search --no-floppy --fs-uuid --set=root 7a695794-1d19-456d-8fa8-684c92d1a3c4
fi
echo 'Chargement de Linux 3.13.0-125-generic…'
linux /boot/vmlinuz-3.13.0-125-generic root=UUID=7a695794-1d19-456d-8fa8-684c92d1a3c4 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-125-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-125-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-125-generic-recovery-7a695794-1d19-456d-8fa8-684c92d1a3c4' {
recordfail
load_video
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 7a695794-1d19-456d-8fa8-684c92d1a3c4
else
search --no-floppy --fs-uuid --set=root 7a695794-1d19-456d-8fa8-684c92d1a3c4
fi
echo 'Chargement de Linux 3.13.0-125-generic…'
linux /boot/vmlinuz-3.13.0-125-generic root=UUID=7a695794-1d19-456d-8fa8-684c92d1a3c4 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-125-generic
}
menuentry 'Ubuntu, avec Linux 3.11.0-20-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.11.0-20-generic-advanced-7a695794-1d19-456d-8fa8-684c92d1a3c4' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 7a695794-1d19-456d-8fa8-684c92d1a3c4
else
search --no-floppy --fs-uuid --set=root 7a695794-1d19-456d-8fa8-684c92d1a3c4
fi
echo 'Chargement de Linux 3.11.0-20-generic…'
linux /boot/vmlinuz-3.11.0-20-generic root=UUID=7a695794-1d19-456d-8fa8-684c92d1a3c4 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.11.0-20-generic
}
menuentry 'Ubuntu, with Linux 3.11.0-20-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.11.0-20-generic-recovery-7a695794-1d19-456d-8fa8-684c92d1a3c4' {
recordfail
load_video
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 7a695794-1d19-456d-8fa8-684c92d1a3c4
else
search --no-floppy --fs-uuid --set=root 7a695794-1d19-456d-8fa8-684c92d1a3c4
fi
echo 'Chargement de Linux 3.11.0-20-generic…'
linux /boot/vmlinuz-3.11.0-20-generic root=UUID=7a695794-1d19-456d-8fa8-684c92d1a3c4 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.11.0-20-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 7a695794-1d19-456d-8fa8-684c92d1a3c4
else
search --no-floppy --fs-uuid --set=root 7a695794-1d19-456d-8fa8-684c92d1a3c4
fi
knetbsd /boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 7a695794-1d19-456d-8fa8-684c92d1a3c4
else
search --no-floppy --fs-uuid --set=root 7a695794-1d19-456d-8fa8-684c92d1a3c4
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda2/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda2 during installation
UUID=7a695794-1d19-456d-8fa8-684c92d1a3c4 / ext4 errors=remount-ro 0 1
# /dos was on /dev/sda1 during installation
UUID=7306-4EDA /dos vfat utf8,umask=007,gid=46 0 1
# swap was on /dev/sda5 during installation
UUID=bec93776-7ebf-4c5c-9954-2e7eb02fec1f none swap sw 0 0
--------------------------------------------------------------------------------
====================== sda2/boot/extlinux/extlinux.conf: =======================
--------------------------------------------------------------------------------
## /boot/extlinux/extlinux.conf
##
## IMPORTANT WARNING
##
## The configuration of this file is generated automatically.
## Do not edit this file manually, use: extlinux-update
default l0
prompt 1
timeout 50
include themes/debian/theme.cfg
--------------------------------------------------------------------------------
=================== sda2: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
24.378879547 = 26.176622592 boot/grub/grub.cfg 1
24.378303528 = 26.176004096 boot/grub/i386-pc/core.img 1
280.488643646 = 301.172387840 boot/vmlinuz-3.11.0-20-generic 1
221.203689575 = 237.515653120 boot/vmlinuz-3.13.0-125-generic 1
218.926349640 = 235.070377984 boot/vmlinuz-3.13.0-125-generic.efi.signed 1
177.942008972 = 191.063777280 boot/vmlinuz-3.13.0-153-generic 1
180.117794037 = 193.400008704 boot/vmlinuz-3.13.0-153-generic.efi.signed 1
343.231071472 = 368.541556736 boot/vmlinuz-3.13.0-158-generic 2
349.092769623 = 374.835507200 boot/vmlinuz-3.13.0-158-generic.efi.signed 2
347.734992981 = 373.377605632 boot/vmlinuz-3.13.0-168-generic 1
347.734992981 = 373.377605632 vmlinuz 1
343.231071472 = 368.541556736 vmlinuz.old 2
456.969570160 = 490.667339776 boot/initrd.img-3.11.0-20-generic 3
179.185649872 = 192.399126528 boot/initrd.img-3.13.0-125-generic 4
180.467010498 = 193.774977024 boot/initrd.img-3.13.0-153-generic 1
348.996578217 = 374.732222464 boot/initrd.img-3.13.0-158-generic 2
350.052917480 = 375.866458112 boot/initrd.img-3.13.0-168-generic 2
350.052917480 = 375.866458112 initrd.img 2
348.996578217 = 374.732222464 initrd.img.old 2
================= sda2: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
33.151149750 = 35.595776000 boot/extlinux/extlinux.conf 1
77.394191742 = 83.101380608 boot/extlinux/chain.c32 1
============== sda2: Version of COM32(R) files used by Syslinux: ===============
boot/extlinux/chain.c32 : COM32R module (v4.xx)
=========================== sdb1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
if loadfont /boot/grub/font.pf2 ; then
set gfxmode=auto
insmod efi_gop
insmod efi_uga
insmod gfxterm
terminal_output gfxterm
fi
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
set timeout=5
menuentry "Try Ubuntu without installing" {
set gfxpayload=keep
linux /casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---
initrd /casper/initrd
}
menuentry "Install Ubuntu" {
set gfxpayload=keep
linux /casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash ---
initrd /casper/initrd
}
menuentry "OEM install (for manufacturers)" {
set gfxpayload=keep
linux /casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true ---
initrd /casper/initrd
}
menuentry "Check disc for defects" {
set gfxpayload=keep
linux /casper/vmlinuz boot=casper integrity-check quiet splash ---
initrd /casper/initrd
}
--------------------------------------------------------------------------------
============================== sdb1/syslinux.cfg: ==============================
--------------------------------------------------------------------------------
default menu.c32
prompt 0
menu title UNetbootin
timeout 100
label unetbootindefault
menu label Default
kernel /ubnkern
append initrd=/ubninit file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---
label ubnentry0
menu label ^Help
kernel /ubnkern
append initrd=/ubninit
label ubnentry1
menu label ^Try Ubuntu without installing
kernel /casper/vmlinuz
append initrd=/casper/initrd file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---
label ubnentry2
menu label ^Install Ubuntu
kernel /casper/vmlinuz
append initrd=/casper/initrd file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash ---
label ubnentry3
menu label ^Check disc for defects
kernel /casper/vmlinuz
append initrd=/casper/initrd boot=casper integrity-check quiet splash ---
label ubnentry4
menu label Test ^memory
kernel /install/mt86plus
append initrd=/ubninit
label ubnentry5
menu label ^Boot from first hard disk
kernel /ubnkern
append initrd=/ubninit
label ubnentry6
menu label Try Ubuntu without installing
kernel /casper/vmlinuz
append initrd=/casper/initrd file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---
label ubnentry7
menu label Install Ubuntu
kernel /casper/vmlinuz
append initrd=/casper/initrd file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash ---
label ubnentry8
menu label OEM install (for manufacturers)
kernel /casper/vmlinuz
append initrd=/casper/initrd file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true ---
label ubnentry9
menu label Check disc for defects
kernel /casper/vmlinuz
append initrd=/casper/initrd boot=casper integrity-check quiet splash ---
--------------------------------------------------------------------------------
=================== sdb1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
?? = ?? boot/grub/grub.cfg 1
================= sdb1: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
?? = ?? syslinux.cfg 1
?? = ?? ldlinux.sys 1
?? = ?? menu.c32 1
============== sdb1: Version of COM32(R) files used by Syslinux: ===============
menu.c32 : COM32R module (v4.xx)
=============================== StdErr Messages: ===============================
File descriptor 9 (/proc/5814/mountinfo) leaked on lvs invocation. Parent PID 14554: bash
File descriptor 63 (pipe:[89630]) leaked on lvs invocation. Parent PID 14554: bash
ADDITIONAL INFORMATION :
=================== log of boot-info 20190428_2214 ===================
boot-info version : 4ppa65
boot-sav version : 4ppa65
boot-sav-extra version : 4ppa65
glade2script version : 3.2.3~ppa4
boot-info is executed in live-session (Ubuntu 18.04.2 LTS, bionic, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
initrd=/casper/initrd file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --- BOOT_IMAGE=/casper/vmlinuz
ls: cannot access '/home/usr/.config': No such file or directory
=================== os-prober:
/dev/sda2:Ubuntu 14.04.5 LTS (14.04):Ubuntu:linux
=================== blkid:
/dev/sda1: UUID="7306-4EDA" TYPE="vfat" PARTUUID="000aa90a-01"
/dev/sda2: UUID="7a695794-1d19-456d-8fa8-684c92d1a3c4" TYPE="ext4" PARTUUID="000aa90a-02"
/dev/sdb1: LABEL="Angie" UUID="C6AF-08B2" TYPE="vfat" PARTUUID="c0bd1a59-01"
/dev/loop0: TYPE="squashfs"
/dev/loop1: TYPE="squashfs"
/dev/loop2: TYPE="squashfs"
/dev/loop3: TYPE="squashfs"
/dev/loop4: TYPE="squashfs"
/dev/loop5: TYPE="squashfs"
/dev/loop6: TYPE="squashfs"
/dev/loop7: TYPE="squashfs"
/dev/sda5: UUID="bec93776-7ebf-4c5c-9954-2e7eb02fec1f" TYPE="swap" PARTUUID="000aa90a-05"
1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
=================== sda2/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 Apr 24 18:41 grub.d
total 76
-rwxr-xr-x 1 root root 9791 Dec 17 2015 00_header
-rwxr-xr-x 1 root root 6058 Apr 10 2014 05_debian_theme
-rwxr-xr-x 1 root root 11608 Apr 11 2014 10_linux
-rwxr-xr-x 1 root root 10412 Apr 11 2014 20_linux_xen
-rwxr-xr-x 1 root root 1992 Mar 12 2014 20_memtest86+
-rwxr-xr-x 1 root root 11692 Apr 11 2014 30_os-prober
-rwxr-xr-x 1 root root 1418 Aug 2 2016 30_uefi-firmware
-rwxr-xr-x 1 root root 214 Apr 11 2014 40_custom
-rwxr-xr-x 1 root root 216 Apr 11 2014 41_custom
-rw-r--r-- 1 root root 483 Apr 11 2014 README
=================== sda2/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
=================== UEFI/Legacy mode:
This live-session is not in EFI-mode.
SecureBoot maybe enabled.
=================== PARTITIONS & DISKS:
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, is-correct-EFI, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, notbiosboot, /mnt/boot-sav/sda1.
sda2 : sda, not-sepboot, grubenv-ok grub2, grub-pc grub-efi , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, notbiosboot, /mnt/boot-sav/sda2.
sda : not-GPT, BIOSboot-not-needed, has-correctEFI, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
=================== parted -lm:
BYT;
/dev/sda:500GB:scsi:512:512:msdos:ATA ST9500325AS:;
1:1049kB:1001MB:1000MB:fat32::boot;
2:1001MB:495GB:494GB:ext4::;
3:495GB:500GB:5001MB:::;
5:495GB:500GB:5001MB:linux-swap(v1)::;
BYT;
/dev/sdb:15.7GB:scsi:512:512:msdos:SMI :;
1:24.6kB:15.7GB:15.7GB:fat32::boot, lba;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL
loop0 loop squashfs 1.8G
loop1 loop squashfs 91M
loop2 loop squashfs 34.6M
loop3 loop squashfs 140.7M
loop4 loop squashfs 2.3M
loop5 loop squashfs 13M
loop6 loop squashfs 14.5M
loop7 loop squashfs 3.7M
sda disk 465.8G
sda1 part vfat 954M
sda2 part ext4 460.2G
sda3 part 1K
sda5 part swap 4.7G
sdb disk 14.7G
sdb1 part vfat 14.7G Angie
KNAME ROTA RO RM STATE MOUNTPOINT
loop0 1 1 0 /rofs
loop1 1 1 0 /snap/core/6350
loop2 1 1 0 /snap/gtk-common-themes/818
loop3 1 1 0 /snap/gnome-3-26-1604/74
loop4 1 1 0 /snap/gnome-calculator/260
loop5 1 1 0 /snap/gnome-characters/139
loop6 1 1 0 /snap/gnome-logs/45
loop7 1 1 0 /snap/gnome-system-monitor/57
sda 1 0 0 running
sda1 1 0 0 /mnt/boot-sav/sda1
sda2 1 0 0 /mnt/boot-sav/sda2
sda3 1 0 0
sda5 1 0 0 [SWAP]
sdb 1 0 1 running
sdb1 1 0 1 /cdrom
=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=1794684k,nr_inodes=448671,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=363428k,mode=755)
/dev/sdb1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
/cow on / type overlay (rw,relatime,lowerdir=//filesystem.squashfs,upperdir=/cow/upper,workdir=/cow/work)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/unified type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/rdma type cgroup (rw,nosuid,nodev,noexec,relatime,rdma)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=31,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=13291)
mqueue on /dev/mqueue type mqueue (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
tracefs on /sys/kernel/debug/tracing type tracefs (rw,relatime)
configfs on /sys/kernel/config type configfs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,relatime)
tmpfs on /run/user/999 type tmpfs (rw,nosuid,nodev,relatime,size=363424k,mode=700,uid=999,gid=999)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=999,group_id=999)
/var/lib/snapd/snaps/core_6350.snap on /snap/core/6350 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gtk-common-themes_818.snap on /snap/gtk-common-themes/818 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-3-26-1604_74.snap on /snap/gnome-3-26-1604/74 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-calculator_260.snap on /snap/gnome-calculator/260 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-characters_139.snap on /snap/gnome-characters/139 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-logs_45.snap on /snap/gnome-logs/45 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-system-monitor_57.snap on /snap/gnome-system-monitor/57 type squashfs (ro,nodev,relatime,x-gdu.hide)
/dev/sda1 on /mnt/boot-sav/sda1 type vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/sda2 on /mnt/boot-sav/sda2 type ext4 (rw,relatime)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro sda1 sda2 sda3 sda5 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro sdb1 size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd full fuse hidraw0 hidraw1 hidraw2 hpet hugepages hwrng i2c-0 i2c-1 i2c-10 i2c-11 i2c-12 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 i2c-7 i2c-8 i2c-9 initctl input kmsg kvm lightnvm log mapper mcelog media0 mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda5 sdb sdb1 sg0 sg1 shm snapshot snd stderr stdin stdout uhid uinput urandom usb userio v4l vfio vga_arbiter vhci vhost-net vhost-vsock video0 video1 zero
ls /dev/mapper: control
=================== hexdump -n512 -C /dev/sda1
00000000 eb 63 90 6d 6b 64 6f 73 66 73 00 00 02 08 20 00 |.c.mkdosfs.... .|
00000010 02 00 00 00 00 f8 00 00 3f 00 ff 00 00 00 00 00 |........?.......|
00000020 00 d0 1d 00 78 07 00 00 00 00 00 00 02 00 00 00 |....x...........|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 00 01 29 da 4e 06 73 20 20 20 20 20 20 20 20 20 |..).N.s |
00000050 20 20 46 41 54 33 32 20 20 20 00 80 c0 ee e1 02 | FAT32 ......|
00000060 00 00 00 00 ff fa 90 90 f6 c2 80 74 05 f6 c2 70 |...........t...p|
00000070 74 02 b2 80 ea 79 7c 00 00 31 c0 8e d8 8e d0 bc |t....y|..1......|
00000080 00 20 fb a0 64 7c 3c ff 74 02 88 c2 52 bb 17 04 |. ..d|<.t...R...|
00000090 f6 07 03 74 06 be 88 7d e8 17 01 be 05 7c b4 41 |...t...}.....|.A|
000000a0 bb aa 55 cd 13 5a 52 72 3d 81 fb 55 aa 75 37 83 |..U..ZRr=..U.u7.|
000000b0 e1 01 74 32 31 c0 89 44 04 40 88 44 ff 89 44 02 |..t21..D.@.D..D.|
000000c0 c7 04 10 00 66 8b 1e 5c 7c 66 89 5c 08 66 8b 1e |....f..|f..f..|
000000d0 60 7c 66 89 5c 0c c7 44 06 00 70 b4 42 cd 13 72 |`|f...D..p.B..r|
000000e0 05 bb 00 70 eb 76 b4 08 cd 13 73 0d 5a 84 d2 0f |...p.v....s.Z...|
000000f0 83 d0 00 be 93 7d e9 82 00 66 0f b6 c6 88 64 ff |.....}...f....d.|
00000100 40 66 89 44 04 0f b6 d1 c1 e2 02 88 e8 88 f4 40 |@f.D...........@|
00000110 89 44 08 0f b6 c2 c0 e8 02 66 89 04 66 a1 60 7c |.D.......f..f.`||
00000120 66 09 c0 75 4e 66 a1 5c 7c 66 31 d2 66 f7 34 88 |f..uNf.|f1.f.4.|
00000130 d1 31 d2 66 f7 74 04 3b 44 08 7d 37 fe c1 88 c5 |.1.f.t.;D.}7....|
00000140 30 c0 c1 e8 02 08 c1 88 d0 5a 88 c6 bb 00 70 8e |0........Z....p.|
00000150 c3 31 db b8 01 02 cd 13 72 1e 8c c3 60 1e b9 00 |.1......r...`...|
00000160 01 8e db 31 f6 bf 00 80 8e c6 fc f3 a5 1f 61 ff |...1..........a.|
00000170 26 5a 7c be 8e 7d eb 03 be 9d 7d e8 34 00 be a2 |&Z|..}....}.4...|
00000180 7d e8 2e 00 cd 18 eb fe 47 52 55 42 20 00 47 65 |}.......GRUB .Ge|
00000190 6f 6d 00 48 61 72 64 20 44 69 73 6b 00 52 65 61 |om.Hard Disk.Rea|
000001a0 64 00 20 45 72 72 6f 72 0d 0a 00 bb 01 00 b4 0e |d. Error........|
000001b0 cd 10 ac 3c 00 75 f4 c3 00 00 00 00 00 00 00 00 |...<.u..........|
000001c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
udev devtmpfs 1.8G 0 1.8G 0% /dev
tmpfs tmpfs 355M 1.6M 354M 1% /run
/dev/sdb1 vfat 15G 2.0G 13G 14% /cdrom
/dev/loop0 squashfs 1.8G 1.8G 0 100% /rofs
/cow overlay 1.8G 401M 1.4G 23% /
tmpfs tmpfs 1.8G 26M 1.8G 2% /dev/shm
tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock
tmpfs tmpfs 1.8G 0 1.8G 0% /sys/fs/cgroup
tmpfs tmpfs 1.8G 4.0K 1.8G 1% /tmp
tmpfs tmpfs 355M 56K 355M 1% /run/user/999
/dev/loop1 squashfs 91M 91M 0 100% /snap/core/6350
/dev/loop2 squashfs 35M 35M 0 100% /snap/gtk-common-themes/818
/dev/loop3 squashfs 141M 141M 0 100% /snap/gnome-3-26-1604/74
/dev/loop4 squashfs 2.3M 2.3M 0 100% /snap/gnome-calculator/260
/dev/loop5 squashfs 13M 13M 0 100% /snap/gnome-characters/139
/dev/loop6 squashfs 15M 15M 0 100% /snap/gnome-logs/45
/dev/loop7 squashfs 3.8M 3.8M 0 100% /snap/gnome-system-monitor/57
/dev/sda1 vfat 953M 4.0K 953M 1% /mnt/boot-sav/sda1
/dev/sda2 ext4 453G 244G 187G 57% /mnt/boot-sav/sda2
=================== fdisk -l:
Disk /dev/loop0: 1.8 GiB, 1905045504 bytes, 3720792 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop1: 91 MiB, 95408128 bytes, 186344 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop2: 34.6 MiB, 36216832 bytes, 70736 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop3: 140.7 MiB, 147496960 bytes, 288080 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop4: 2.3 MiB, 2355200 bytes, 4600 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop5: 13 MiB, 13619200 bytes, 26600 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop6: 14.5 MiB, 15208448 bytes, 29704 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/loop7: 3.7 MiB, 3878912 bytes, 7576 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/sda: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x000aa90a
Device Boot Start End Sectors Size Id Type
/dev/sda1 * 2048 1955839 1953792 954M b W95 FAT32
/dev/sda2 1955840 967002111 965046272 460.2G 83 Linux
/dev/sda3 967004158 976771071 9766914 4.7G 5 Extended
/dev/sda5 967004160 976771071 9766912 4.7G 82 Linux swap / Solaris
Disk /dev/sdb: 14.7 GiB, 15728640000 bytes, 30720000 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xc0bd1a59
Device Boot Start End Sectors Size Id Type
/dev/sdb1 * 48 30719999 30719952 14.7G c W95 FAT32 (LBA)
=================== Suggested repair
The default repair of the Boot-Repair utility would purge (in order to sign-grub) and reinstall the grub-efi-amd64-signed of sda2, using the following options: sda1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s use-standard-efi-file
=================== Blockers in case of suggested repair
The current session is in Legacy mode. Please reboot the computer, and use this software in an EFI session. This will enable this feature. For example, use a live-USB of Boot-Repair-Disk-64bit (www.sourceforge.net/p/boot-repair-cd), after making sure your BIOS is set up to boot USB in EFI mode.
=================== Advice in case of suggested repair
The boot of your PC is in Legacy mode. You may want to retry after changing it to EFI mode.
Alternatively, you may want to retry after deactivating the [Separate /boot/efi partition:] option.
Do you want to continue?
=================== Final advice in case of suggested repair
Please do not forget to make your BIOS boot on sda1/efi/.../grub*.efi file!
The boot of your PC is in Legacy mode. You may want to retry after changing it to EFI mode.
=================== User settings
The settings chosen by the user will not act on the boot.
J'y vois que le dernier noyau installé est 3.13.0-168 et l'avant-dernier est 3.13.0-158, lequel est sorti en septembre 2018. Tu n'avais pas fait de mises à jour depuis 7 mois sur cette machine.
Dans cet extrait, on voit la présence de noyaux EFI signés qui n'ont rien à faire dans une installation faite en mode non-EFI :
=================== sda2: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
24.378879547 = 26.176622592 boot/grub/grub.cfg 1
24.378303528 = 26.176004096 boot/grub/i386-pc/core.img 1
280.488643646 = 301.172387840 boot/vmlinuz-3.11.0-20-generic 1
221.203689575 = 237.515653120 boot/vmlinuz-3.13.0-125-generic 1
218.926349640 = 235.070377984 boot/vmlinuz-3.13.0-125-generic.efi.signed 1
177.942008972 = 191.063777280 boot/vmlinuz-3.13.0-153-generic 1
180.117794037 = 193.400008704 boot/vmlinuz-3.13.0-153-generic.efi.signed 1
343.231071472 = 368.541556736 boot/vmlinuz-3.13.0-158-generic 2
349.092769623 = 374.835507200 boot/vmlinuz-3.13.0-158-generic.efi.signed 2
347.734992981 = 373.377605632 boot/vmlinuz-3.13.0-168-generic 1
347.734992981 = 373.377605632 vmlinuz 1
343.231071472 = 368.541556736 vmlinuz.old 2
456.969570160 = 490.667339776 boot/initrd.img-3.11.0-20-generic 3
179.185649872 = 192.399126528 boot/initrd.img-3.13.0-125-generic 4
180.467010498 = 193.774977024 boot/initrd.img-3.13.0-153-generic 1
348.996578217 = 374.732222464 boot/initrd.img-3.13.0-158-generic 2
350.052917480 = 375.866458112 boot/initrd.img-3.13.0-168-generic 2
350.052917480 = 375.866458112 initrd.img 2
348.996578217 = 374.732222464 initrd.img.old 2
ça sent le bricolage.
Je ne sais pas te proposer quelque chose par rapport à ton problème de connexion de session mais peut-être que moko138 sera plus inspiré.
Dernière modification par malbo (Le 29/04/2019, à 07:48)
Hors ligne
#19 Le 29/04/2019, à 10:43
- Lisandre
Re : ouverture impossible apres mise a jour [ABANDON]
Bonjour Malbo,
oui tout à fait je me souviens avoir eu beaucoup de "galères" à l'installation avec ce mode "EFI".
Et effectivement je n'avais pas fait de maj depuis longtemps.
Dois-je lire dans ton post début de "RIP" ? (Rest In Peace)
Merci.
Ubuntu 14.04 LTS 64 bits
3.9 Gio de ram dual mode
Proc : AMD Phenom(tm) 8650 Triple-Core Processor × 3
Carte graphique : Radeon HD 7750
Hors ligne
#20 Le 29/04/2019, à 11:19
- malbo
Re : ouverture impossible apres mise a jour [ABANDON]
Dois-je lire dans ton post début de "RIP" ? (Rest In Peace)
Je ne comprends pas ce que tu racontes là. Peux-tu expliquer ?
Hors ligne
#21 Le 29/04/2019, à 11:48
- Lisandre
Re : ouverture impossible apres mise a jour [ABANDON]
Pardon si la formule n'était pas claire. Je voulais dire : tu penses donc que c'est mort...
Il faut que je sauve les données via un live USB et que je refasse une installation propre et nette ?
J'attends un éventuel coup de génie de moko138, et sinon c'est foutu ?
Ubuntu 14.04 LTS 64 bits
3.9 Gio de ram dual mode
Proc : AMD Phenom(tm) 8650 Triple-Core Processor × 3
Carte graphique : Radeon HD 7750
Hors ligne
#22 Le 29/04/2019, à 13:21
- malbo
Re : ouverture impossible apres mise a jour [ABANDON]
Moi je sais voir des choses dans le Boot-Info et je les ai déjà détaillées mais c'est une autre histoire que d'aider à dépanner. C'est vrai aussi que c'est le moment de faire une installation toute neuve de la version 18.04 de Ubuntu au lieu de ta version actuelle (14.04) qui est sera obsolète dans quelques jours.
Dernière modification par malbo (Le 29/04/2019, à 13:24)
Hors ligne
#23 Le 02/05/2019, à 13:30
- Lisandre
Re : ouverture impossible apres mise a jour [ABANDON]
Eh bien c'est mort...
Ubuntu 14.04 LTS 64 bits
3.9 Gio de ram dual mode
Proc : AMD Phenom(tm) 8650 Triple-Core Processor × 3
Carte graphique : Radeon HD 7750
Hors ligne
#24 Le 03/05/2019, à 07:49
- malbo
Re : ouverture impossible apres mise a jour [ABANDON]
Eh bien c'est mort...
Alors pourquoi avoir ajouté "Résolu" dans le titre de la discussion. C'est "Abandonné" ou "c'est mort" qu'il fallait ajouter...
Hors ligne