#151 Le 26/02/2020, à 23:53
- NicoApi73
Re : [Résolu] Linux Ubuntu ne redémarre plus.
Ca va être long : reboote et donne le retour (entre balise code)de :
dmesgJe ne connais que ce moyen pour voir ce qui peut prendre du temps. Et si ça vient de l'interface graphique, j'aurais du mal à t'aider.
===================================================================
Concernant tes données, tu peux ouvrir l'archive comme tu ouvrirais un répertoire. Afin d'éviter toute fausse manip, copie la dans ton home, puis avec ton gestionnaire de fichier tu peux l'ouvrir.
Tout ce qui commence par un . est soit un fichier caché, soit un répertoire. La structure de ton archive correspond à celle de ton home. Il te suffit de recopier de l'archive sur ton install au même endroit. Tout ce qui concerne firefox se trouve dans .mozilla. Tu peux le copier tel quel
Hors ligne
#152 Le 27/02/2020, à 10:43
- un dissident
Re : [Résolu] Linux Ubuntu ne redémarre plus.
NicoApi73 a écrit :
Ca va être long : reboote et donne le retour (entre balise code)de :
dmesgJe ne connais que ce moyen pour voir ce qui peut prendre du temps. Et si ça vient de l'interface graphique, j'aurais du mal à t'aider.
===================================================================
Concernant tes données, tu peux ouvrir l'archive comme tu ouvrirais un répertoire. Afin d'éviter toute fausse manip, copie la dans ton home, puis avec ton gestionnaire de fichier tu peux l'ouvrir.
Tout ce qui commence par un . est soit un fichier caché, soit un répertoire. La structure de ton archive correspond à celle de ton home. Il te suffit de recopier de l'archive sur ton install au même endroit. Tout ce qui concerne firefox se trouve dans .mozilla. Tu peux le copier tel quel
Bonjour,
pour la commande "dmesg" voici le résultat:
[ 0.000000] Linux version 4.15.0-88-generic (buildd@lgw01-amd64-036) (gcc version 7.4.0 (Ubuntu 7.4.0-1ubuntu1~18.04.1)) #88-Ubuntu SMP Tue Feb 11 20:11:34 UTC 2020 (Ubuntu 4.15.0-88.88-generic 4.15.18)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-88-generic root=UUID=41413909-9223-41ea-9e5a-c0f91d6212b5 ro quiet splash vt.handoff=1
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000003ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000004000000-0x0000000004009fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000000400a000-0x0000000009bfffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000009c00000-0x0000000009ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000affffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000000b020000-0x00000000d3830fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d3831000-0x00000000d384bfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000d384c000-0x00000000da54cfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000da54d000-0x00000000da68cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000da68d000-0x00000000da696fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000da697000-0x00000000da79efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000da79f000-0x00000000dab5afff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000dab5b000-0x00000000db877fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000db878000-0x00000000db918fff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000db919000-0x00000000ddffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000de000000-0x00000000dfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fd800000-0x00000000fdffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041f37ffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.60 by American Megatrends
[ 0.000000] efi: ACPI 2.0=0xd3831000 ACPI=0xd3831000 SMBIOS=0xdb7e6000 SMBIOS 3.0=0xdb7e5000 ESRT=0xd7e25718 MEMATTR=0xd7e90018
[ 0.000000] secureboot: Secure boot could not be determined (mode 0)
[ 0.000000] SMBIOS 3.1.1 present.
[ 0.000000] DMI: System manufacturer System Product Name/PRIME B350M-A, BIOS 4023 08/20/2018
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x41f380 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-through
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFE0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000420000000 aka 16896M
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xde000 max_arch_pfn = 0x400000000
[ 0.000000] esrt: Reserving ESRT space from 0x00000000d7e25718 to 0x00000000d7e25750.
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x364790000, 0x364790fff] PGTABLE
[ 0.000000] BRK [0x364791000, 0x364791fff] PGTABLE
[ 0.000000] BRK [0x364792000, 0x364792fff] PGTABLE
[ 0.000000] BRK [0x364793000, 0x364793fff] PGTABLE
[ 0.000000] BRK [0x364794000, 0x364794fff] PGTABLE
[ 0.000000] BRK [0x364795000, 0x364795fff] PGTABLE
[ 0.000000] BRK [0x364796000, 0x364796fff] PGTABLE
[ 0.000000] BRK [0x364797000, 0x364797fff] PGTABLE
[ 0.000000] BRK [0x364798000, 0x364798fff] PGTABLE
[ 0.000000] BRK [0x364799000, 0x364799fff] PGTABLE
[ 0.000000] BRK [0x36479a000, 0x36479afff] PGTABLE
[ 0.000000] BRK [0x36479b000, 0x36479bfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x334cb000-0x35a5cfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000D3831000 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000D3831098 0000AC (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000D383B998 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20170831/tbfadt-658)
[ 0.000000] ACPI: DSDT 0x00000000D38311E0 00A7B4 (v02 ALASKA A M I 01072009 INTL 20120913)
[ 0.000000] ACPI: FACS 0x00000000DAB43E00 000040
[ 0.000000] ACPI: APIC 0x00000000D383BAB0 0000DE (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000D383BB90 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FIDT 0x00000000D383BBD8 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x00000000D384A050 001A41 (v01 AMD AmdTable 00000001 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000D383BCD0 008C98 (v02 AMD AMD ALIB 00000002 MSFT 04000000)
[ 0.000000] ACPI: SSDT 0x00000000D3844968 001A58 (v01 AMD AMD CPU 00000001 AMD 00000001)
[ 0.000000] ACPI: CRAT 0x00000000D38463C0 000BD0 (v01 AMD AMD CRAT 00000001 AMD 00000001)
[ 0.000000] ACPI: CDIT 0x00000000D3846F90 000029 (v01 AMD AMD CDIT 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 0x00000000D3846FC0 002DA8 (v01 AMD AMD AOD 00000001 INTL 20120913)
[ 0.000000] ACPI: MCFG 0x00000000D3849D68 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.000000] ACPI: HPET 0x00000000D3849DA8 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.000000] ACPI: SSDT 0x00000000D3849DE0 000024 (v01 AMDFCH FCHZP 00001000 INTL 20120913)
[ 0.000000] ACPI: UEFI 0x00000000D3849E08 000042 (v01 00000000 00000000)
[ 0.000000] ACPI: BGRT 0x00000000D3849E50 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: IVRS 0x00000000D3849E88 0000D0 (v02 AMD AMD IVRS 00000001 AMD 00000000)
[ 0.000000] ACPI: SSDT 0x00000000D3849F58 0000F8 (v01 AMD AMD PT 00001000 INTL 20120913)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] system APIC only can use physical flat
[ 0.000000] Setting APIC routing to physical flat.
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041f37ffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x41f355000-0x41f37ffff]
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000041f37ffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x0000000003ffffff]
[ 0.000000] node 0: [mem 0x000000000400a000-0x0000000009bfffff]
[ 0.000000] node 0: [mem 0x000000000a000000-0x000000000affffff]
[ 0.000000] node 0: [mem 0x000000000b020000-0x00000000d3830fff]
[ 0.000000] node 0: [mem 0x00000000d384c000-0x00000000da54cfff]
[ 0.000000] node 0: [mem 0x00000000da697000-0x00000000da79efff]
[ 0.000000] node 0: [mem 0x00000000db919000-0x00000000ddffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000041f37ffff]
[ 0.000000] Reserved but unavailable: 97 pages
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041f37ffff]
[ 0.000000] On node 0 totalpages: 4176918
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 27 pages reserved
[ 0.000000] DMA zone: 3999 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14052 pages used for memmap
[ 0.000000] DMA32 zone: 899319 pages, LIFO batch:31
[ 0.000000] Normal zone: 51150 pages used for memmap
[ 0.000000] Normal zone: 3273600 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] system APIC only can use physical flat
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 13, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] IOAPIC[1]: apic_id 14, version 33, address 0xfec01000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 16 CPUs, 4 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x04000000-0x04009fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x09c00000-0x09ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd3831000-0xd384bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xda54d000-0xda68cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xda68d000-0xda696fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xda79f000-0xdab5afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdab5b000-0xdb877fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdb878000-0xdb918fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xde000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfd7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfd800000-0xfdffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfedd6000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x99/0x4fd with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
[ 0.000000] percpu: Embedded 45 pages/cpu s147456 r8192 d28672 u262144
[ 0.000000] pcpu-alloc: s147456 r8192 d28672 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4111625
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-88-generic root=UUID=41413909-9223-41ea-9e5a-c0f91d6212b5 ro quiet splash vt.handoff=1
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16185828K/16707672K available (12300K kernel code, 2481K rwdata, 4264K rodata, 2428K init, 2712K bss, 521844K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[ 0.000000] ftrace: allocating 39344 entries in 154 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
[ 0.000000] NR_IRQS: 524544, nr_irqs: 1096, preallocated irqs: 16
[ 0.000000] vt handoff: transparent VT on vt#1
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20170831
[ 0.000000] ACPI: 7 ACPI AML tables successfully acquired and loaded
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.004000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.024000] tsc: Fast TSC calibration using PIT
[ 0.028000] tsc: Detected 3892.559 MHz processor
[ 0.028000] Calibrating delay loop (skipped), value calculated using timer frequency.. 7785.11 BogoMIPS (lpj=15570236)
[ 0.028000] pid_max: default: 32768 minimum: 301
[ 0.028000] Security Framework initialized
[ 0.028000] Yama: becoming mindful.
[ 0.028000] AppArmor: AppArmor initialized
[ 0.032010] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.033088] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.033140] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.033173] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.033374] LVT offset 1 assigned for vector 0xf9
[ 0.033439] LVT offset 2 assigned for vector 0xf4
[ 0.033450] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[ 0.033450] Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
[ 0.033451] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.033452] Spectre V2 : Mitigation: Full AMD retpoline
[ 0.033453] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.033458] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.033458] Spectre V2 : User space: Vulnerable
[ 0.033459] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.040495] Freeing SMP alternatives memory: 36K
[ 0.151758] smpboot: CPU0: AMD Ryzen 5 1600X Six-Core Processor (family: 0x17, model: 0x1, stepping: 0x1)
[ 0.151817] Performance Events: Fam17h core perfctr, AMD PMU driver.
[ 0.151821] ... version: 0
[ 0.151821] ... bit width: 48
[ 0.151821] ... generic registers: 6
[ 0.151822] ... value mask: 0000ffffffffffff
[ 0.151822] ... max period: 00007fffffffffff
[ 0.151822] ... fixed-purpose events: 0
[ 0.151823] ... event mask: 000000000000003f
[ 0.151847] Hierarchical SRCU implementation.
[ 0.152000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.152000] smp: Bringing up secondary CPUs ...
[ 0.152000] x86: Booting SMP configuration:
[ 0.152000] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11
[ 0.172025] smp: Brought up 1 node, 12 CPUs
[ 0.172025] smpboot: Max logical packages: 2
[ 0.172025] smpboot: Total of 12 processors activated (93421.41 BogoMIPS)
[ 0.172949] devtmpfs: initialized
[ 0.172949] x86/mm: Memory block size: 128MB
[ 0.172949] evm: security.selinux
[ 0.172949] evm: security.SMACK64
[ 0.172949] evm: security.SMACK64EXEC
[ 0.172949] evm: security.SMACK64TRANSMUTE
[ 0.172949] evm: security.SMACK64MMAP
[ 0.172949] evm: security.apparmor
[ 0.172949] evm: security.ima
[ 0.172949] evm: security.capability
[ 0.172949] PM: Registering ACPI NVS region [mem 0x04000000-0x04009fff] (40960 bytes)
[ 0.172949] PM: Registering ACPI NVS region [mem 0xda79f000-0xdab5afff] (3915776 bytes)
[ 0.172980] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.172980] futex hash table entries: 4096 (order: 6, 262144 bytes)
[ 0.172980] pinctrl core: initialized pinctrl subsystem
[ 0.172980] RTC time: 8:32:10, date: 02/27/20
[ 0.176109] NET: Registered protocol family 16
[ 0.176162] audit: initializing netlink subsys (disabled)
[ 0.176167] audit: type=2000 audit(1582792330.176:1): state=initialized audit_enabled=0 res=1
[ 0.176167] cpuidle: using governor ladder
[ 0.176167] cpuidle: using governor menu
[ 0.176167] ACPI: bus type PCI registered
[ 0.176167] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.176167] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.176167] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.176167] PCI: Using configuration type 1 for base access
[ 0.176898] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.176898] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.176898] ACPI: Added _OSI(Module Device)
[ 0.176898] ACPI: Added _OSI(Processor Device)
[ 0.176898] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.176898] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.176898] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.176898] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.176898] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.176898] ACPI: Executed 2 blocks of module-level executable AML code
[ 0.180002] ACPI Error: Needed [Integer/String/Buffer], found [Region] (ptrval) (20170831/exresop-424)
[ 0.180002] Executing subtree for Buffer/Package/Region
[ 0.180002] ACPI Exception: AE_AML_OPERAND_TYPE, Could not execute arguments for [IOB2] (Region) (20170831/nsinit-426)
[ 0.181967] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.184995] ACPI: Interpreter enabled
[ 0.185007] ACPI: (supports S0 S3 S4 S5)
[ 0.185007] ACPI: Using IOAPIC for interrupt routing
[ 0.185304] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.185587] ACPI: Enabled 3 GPEs in block 00 to 1F
[ 0.191635] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.191638] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.191820] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.191994] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.192006] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.192316] PCI host bridge to bus 0000:00
[ 0.192317] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.192318] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.192319] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
[ 0.192319] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.192320] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.192321] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.192322] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window]
[ 0.192322] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
[ 0.192323] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.192328] pci 0000:00:00.0: [1022:1450] type 00 class 0x060000
[ 0.192400] pci 0000:00:00.2: [1022:1451] type 00 class 0x080600
[ 0.192485] pci 0000:00:01.0: [1022:1452] type 00 class 0x060000
[ 0.192549] pci 0000:00:01.3: [1022:1453] type 01 class 0x060400
[ 0.192655] pci 0000:00:01.3: PME# supported from D0 D3hot D3cold
[ 0.192732] pci 0000:00:02.0: [1022:1452] type 00 class 0x060000
[ 0.192807] pci 0000:00:03.0: [1022:1452] type 00 class 0x060000
[ 0.192872] pci 0000:00:03.1: [1022:1453] type 01 class 0x060400
[ 0.192990] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
[ 0.193077] pci 0000:00:04.0: [1022:1452] type 00 class 0x060000
[ 0.193156] pci 0000:00:07.0: [1022:1452] type 00 class 0x060000
[ 0.193216] pci 0000:00:07.1: [1022:1454] type 01 class 0x060400
[ 0.193545] pci 0000:00:07.1: enabling Extended Tags
[ 0.193618] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
[ 0.193696] pci 0000:00:08.0: [1022:1452] type 00 class 0x060000
[ 0.193755] pci 0000:00:08.1: [1022:1454] type 01 class 0x060400
[ 0.193782] pci 0000:00:08.1: enabling Extended Tags
[ 0.193854] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[ 0.193967] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
[ 0.194176] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
[ 0.194389] pci 0000:00:18.0: [1022:1460] type 00 class 0x060000
[ 0.194440] pci 0000:00:18.1: [1022:1461] type 00 class 0x060000
[ 0.194490] pci 0000:00:18.2: [1022:1462] type 00 class 0x060000
[ 0.194539] pci 0000:00:18.3: [1022:1463] type 00 class 0x060000
[ 0.194587] pci 0000:00:18.4: [1022:1464] type 00 class 0x060000
[ 0.194635] pci 0000:00:18.5: [1022:1465] type 00 class 0x060000
[ 0.194684] pci 0000:00:18.6: [1022:1466] type 00 class 0x060000
[ 0.194733] pci 0000:00:18.7: [1022:1467] type 00 class 0x060000
[ 0.194867] pci 0000:01:00.0: [1022:43bb] type 00 class 0x0c0330
[ 0.194887] pci 0000:01:00.0: reg 0x10: [mem 0xf75a0000-0xf75a7fff 64bit]
[ 0.194960] pci 0000:01:00.0: PME# supported from D3hot D3cold
[ 0.195017] pci 0000:01:00.1: [1022:43b7] type 00 class 0x010601
[ 0.195060] pci 0000:01:00.1: reg 0x24: [mem 0xf7580000-0xf759ffff]
[ 0.195066] pci 0000:01:00.1: reg 0x30: [mem 0xf7500000-0xf757ffff pref]
[ 0.195103] pci 0000:01:00.1: PME# supported from D3hot D3cold
[ 0.195144] pci 0000:01:00.2: [1022:43b2] type 01 class 0x060400
[ 0.195213] pci 0000:01:00.2: PME# supported from D3hot D3cold
[ 0.208021] pci 0000:00:01.3: PCI bridge to [bus 01-07]
[ 0.208024] pci 0000:00:01.3: bridge window [io 0xd000-0xefff]
[ 0.208026] pci 0000:00:01.3: bridge window [mem 0xf7200000-0xf75fffff]
[ 0.208133] pci 0000:02:00.0: [1022:43b4] type 01 class 0x060400
[ 0.208218] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.208289] pci 0000:02:04.0: [1022:43b4] type 01 class 0x060400
[ 0.208372] pci 0000:02:04.0: PME# supported from D3hot D3cold
[ 0.208428] pci 0000:02:05.0: [1022:43b4] type 01 class 0x060400
[ 0.208509] pci 0000:02:05.0: PME# supported from D3hot D3cold
[ 0.208567] pci 0000:02:06.0: [1022:43b4] type 01 class 0x060400
[ 0.208647] pci 0000:02:06.0: PME# supported from D3hot D3cold
[ 0.208705] pci 0000:02:07.0: [1022:43b4] type 01 class 0x060400
[ 0.208785] pci 0000:02:07.0: PME# supported from D3hot D3cold
[ 0.208854] pci 0000:01:00.2: PCI bridge to [bus 02-07]
[ 0.208858] pci 0000:01:00.2: bridge window [io 0xd000-0xefff]
[ 0.208861] pci 0000:01:00.2: bridge window [mem 0xf7200000-0xf74fffff]
[ 0.208927] pci 0000:03:00.0: [1b21:1242] type 00 class 0x0c0330
[ 0.208966] pci 0000:03:00.0: reg 0x10: [mem 0xf7400000-0xf7407fff 64bit]
[ 0.209150] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.224027] pci 0000:02:00.0: PCI bridge to [bus 03]
[ 0.224034] pci 0000:02:00.0: bridge window [mem 0xf7400000-0xf74fffff]
[ 0.224089] pci 0000:02:04.0: PCI bridge to [bus 04]
[ 0.224129] pci 0000:02:05.0: PCI bridge to [bus 05]
[ 0.224198] pci 0000:06:00.0: [10ec:8168] type 00 class 0x020000
[ 0.224239] pci 0000:06:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.224274] pci 0000:06:00.0: reg 0x18: [mem 0xf7304000-0xf7304fff 64bit]
[ 0.224296] pci 0000:06:00.0: reg 0x20: [mem 0xf7300000-0xf7303fff 64bit]
[ 0.224423] pci 0000:06:00.0: supports D1 D2
[ 0.224424] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.240038] pci 0000:02:06.0: PCI bridge to [bus 06]
[ 0.240043] pci 0000:02:06.0: bridge window [io 0xe000-0xefff]
[ 0.240046] pci 0000:02:06.0: bridge window [mem 0xf7300000-0xf73fffff]
[ 0.240122] pci 0000:07:00.0: [10ec:8812] type 00 class 0x028000
[ 0.240161] pci 0000:07:00.0: reg 0x10: [io 0xd000-0xd0ff]
[ 0.240191] pci 0000:07:00.0: reg 0x18: [mem 0xf7200000-0xf7203fff 64bit]
[ 0.240330] pci 0000:07:00.0: supports D1 D2
[ 0.240331] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.256039] pci 0000:02:07.0: PCI bridge to [bus 07]
[ 0.256045] pci 0000:02:07.0: bridge window [io 0xd000-0xdfff]
[ 0.256047] pci 0000:02:07.0: bridge window [mem 0xf7200000-0xf72fffff]
[ 0.256163] pci 0000:08:00.0: [10de:1d01] type 00 class 0x030000
[ 0.256192] pci 0000:08:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[ 0.256205] pci 0000:08:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.256219] pci 0000:08:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.256228] pci 0000:08:00.0: reg 0x24: [io 0xf000-0xf07f]
[ 0.256237] pci 0000:08:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[ 0.256253] pci 0000:08:00.0: BAR 3: assigned to efifb
[ 0.256388] pci 0000:08:00.1: [10de:0fb8] type 00 class 0x040300
[ 0.256407] pci 0000:08:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
[ 0.272029] pci 0000:00:03.1: PCI bridge to [bus 08]
[ 0.272033] pci 0000:00:03.1: bridge window [io 0xf000-0xffff]
[ 0.272035] pci 0000:00:03.1: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.272039] pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.272120] pci 0000:09:00.0: [1022:145a] type 00 class 0x130000
[ 0.272146] pci 0000:09:00.0: enabling Extended Tags
[ 0.272208] pci 0000:09:00.2: [1022:1456] type 00 class 0x108000
[ 0.272222] pci 0000:09:00.2: reg 0x18: [mem 0xf7700000-0xf77fffff]
[ 0.272230] pci 0000:09:00.2: reg 0x24: [mem 0xf7800000-0xf7801fff]
[ 0.272236] pci 0000:09:00.2: enabling Extended Tags
[ 0.272303] pci 0000:09:00.3: [1022:145c] type 00 class 0x0c0330
[ 0.272315] pci 0000:09:00.3: reg 0x10: [mem 0xf7600000-0xf76fffff 64bit]
[ 0.272334] pci 0000:09:00.3: enabling Extended Tags
[ 0.272360] pci 0000:09:00.3: PME# supported from D0 D3hot D3cold
[ 0.272409] pci 0000:00:07.1: PCI bridge to [bus 09]
[ 0.272412] pci 0000:00:07.1: bridge window [mem 0xf7600000-0xf78fffff]
[ 0.272733] pci 0000:0a:00.0: [1022:1455] type 00 class 0x130000
[ 0.272759] pci 0000:0a:00.0: enabling Extended Tags
[ 0.272816] pci 0000:0a:00.2: [1022:7901] type 00 class 0x010601
[ 0.272843] pci 0000:0a:00.2: reg 0x24: [mem 0xf7908000-0xf7908fff]
[ 0.272849] pci 0000:0a:00.2: enabling Extended Tags
[ 0.272876] pci 0000:0a:00.2: PME# supported from D3hot D3cold
[ 0.272916] pci 0000:0a:00.3: [1022:1457] type 00 class 0x040300
[ 0.272925] pci 0000:0a:00.3: reg 0x10: [mem 0xf7900000-0xf7907fff]
[ 0.272942] pci 0000:0a:00.3: enabling Extended Tags
[ 0.272967] pci 0000:0a:00.3: PME# supported from D0 D3hot D3cold
[ 0.273020] pci 0000:00:08.1: PCI bridge to [bus 0a]
[ 0.273024] pci 0000:00:08.1: bridge window [mem 0xf7900000-0xf79fffff]
[ 0.273365] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
[ 0.273419] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[ 0.273466] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[ 0.273524] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[ 0.273576] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[ 0.273619] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[ 0.273662] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[ 0.273705] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[ 0.276002] SCSI subsystem initialized
[ 0.276011] libata version 3.00 loaded.
[ 0.276018] pci 0000:08:00.0: vgaarb: setting as boot VGA device
[ 0.276018] pci 0000:08:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.276018] pci 0000:08:00.0: vgaarb: bridge control possible
[ 0.276018] vgaarb: loaded
[ 0.276020] ACPI: bus type USB registered
[ 0.276027] usbcore: registered new interface driver usbfs
[ 0.276031] usbcore: registered new interface driver hub
[ 0.276059] usbcore: registered new device driver usb
[ 0.276088] EDAC MC: Ver: 3.0.0
[ 0.276102] Registered efivars operations
[ 0.276102] PCI: Using ACPI for IRQ routing
[ 0.278884] PCI: pci_cache_line_size set to 64 bytes
[ 0.278947] e820: reserve RAM buffer [mem 0x09c00000-0x0bffffff]
[ 0.278948] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
[ 0.278948] e820: reserve RAM buffer [mem 0xd3831000-0xd3ffffff]
[ 0.278949] e820: reserve RAM buffer [mem 0xda54d000-0xdbffffff]
[ 0.278949] e820: reserve RAM buffer [mem 0xda79f000-0xdbffffff]
[ 0.278950] e820: reserve RAM buffer [mem 0xde000000-0xdfffffff]
[ 0.278950] e820: reserve RAM buffer [mem 0x41f380000-0x41fffffff]
[ 0.279008] NetLabel: Initializing
[ 0.279008] NetLabel: domain hash size = 128
[ 0.279009] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.279018] NetLabel: unlabeled traffic allowed by default
[ 0.280030] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.280032] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.285046] clocksource: Switched to clocksource hpet
[ 0.291779] VFS: Disk quotas dquot_6.6.0
[ 0.291794] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.291874] AppArmor: AppArmor Filesystem Enabled
[ 0.291896] pnp: PnP ACPI init
[ 0.292037] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.292040] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.292102] system 00:01: [mem 0xfeb80000-0xfebfffff] could not be reserved
[ 0.292104] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.292173] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.292321] system 00:03: [io 0x0300-0x030f] has been reserved
[ 0.292322] system 00:03: [io 0x0230-0x023f] has been reserved
[ 0.292322] system 00:03: [io 0x0290-0x029f] has been reserved
[ 0.292324] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.292580] pnp 00:04: [dma 0 disabled]
[ 0.292610] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.292807] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.292808] system 00:05: [io 0x040b] has been reserved
[ 0.292809] system 00:05: [io 0x04d6] has been reserved
[ 0.292809] system 00:05: [io 0x0c00-0x0c01] has been reserved
[ 0.292810] system 00:05: [io 0x0c14] has been reserved
[ 0.292811] system 00:05: [io 0x0c50-0x0c51] has been reserved
[ 0.292811] system 00:05: [io 0x0c52] has been reserved
[ 0.292812] system 00:05: [io 0x0c6c] has been reserved
[ 0.292812] system 00:05: [io 0x0c6f] has been reserved
[ 0.292813] system 00:05: [io 0x0cd0-0x0cd1] has been reserved
[ 0.292814] system 00:05: [io 0x0cd2-0x0cd3] has been reserved
[ 0.292814] system 00:05: [io 0x0cd4-0x0cd5] has been reserved
[ 0.292815] system 00:05: [io 0x0cd6-0x0cd7] has been reserved
[ 0.292816] system 00:05: [io 0x0cd8-0x0cdf] has been reserved
[ 0.292816] system 00:05: [io 0x0800-0x089f] has been reserved
[ 0.292817] system 00:05: [io 0x0b00-0x0b0f] has been reserved
[ 0.292818] system 00:05: [io 0x0b20-0x0b3f] has been reserved
[ 0.292818] system 00:05: [io 0x0900-0x090f] has been reserved
[ 0.292819] system 00:05: [io 0x0910-0x091f] has been reserved
[ 0.292820] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.292821] system 00:05: [mem 0xfec01000-0xfec01fff] could not be reserved
[ 0.292822] system 00:05: [mem 0xfedc0000-0xfedc0fff] has been reserved
[ 0.292823] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.292823] system 00:05: [mem 0xfed80000-0xfed8ffff] could not be reserved
[ 0.292824] system 00:05: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.292825] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 0.292827] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.293241] pnp: PnP ACPI: found 6 devices
[ 0.299588] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.299642] pci 0000:02:00.0: PCI bridge to [bus 03]
[ 0.299647] pci 0000:02:00.0: bridge window [mem 0xf7400000-0xf74fffff]
[ 0.299653] pci 0000:02:04.0: PCI bridge to [bus 04]
[ 0.299661] pci 0000:02:05.0: PCI bridge to [bus 05]
[ 0.299670] pci 0000:02:06.0: PCI bridge to [bus 06]
[ 0.299671] pci 0000:02:06.0: bridge window [io 0xe000-0xefff]
[ 0.299675] pci 0000:02:06.0: bridge window [mem 0xf7300000-0xf73fffff]
[ 0.299681] pci 0000:02:07.0: PCI bridge to [bus 07]
[ 0.299682] pci 0000:02:07.0: bridge window [io 0xd000-0xdfff]
[ 0.299685] pci 0000:02:07.0: bridge window [mem 0xf7200000-0xf72fffff]
[ 0.299691] pci 0000:01:00.2: PCI bridge to [bus 02-07]
[ 0.299693] pci 0000:01:00.2: bridge window [io 0xd000-0xefff]
[ 0.299696] pci 0000:01:00.2: bridge window [mem 0xf7200000-0xf74fffff]
[ 0.299701] pci 0000:00:01.3: PCI bridge to [bus 01-07]
[ 0.299702] pci 0000:00:01.3: bridge window [io 0xd000-0xefff]
[ 0.299704] pci 0000:00:01.3: bridge window [mem 0xf7200000-0xf75fffff]
[ 0.299708] pci 0000:00:03.1: PCI bridge to [bus 08]
[ 0.299709] pci 0000:00:03.1: bridge window [io 0xf000-0xffff]
[ 0.299711] pci 0000:00:03.1: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.299713] pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.299716] pci 0000:00:07.1: PCI bridge to [bus 09]
[ 0.299718] pci 0000:00:07.1: bridge window [mem 0xf7600000-0xf78fffff]
[ 0.299722] pci 0000:00:08.1: PCI bridge to [bus 0a]
[ 0.299723] pci 0000:00:08.1: bridge window [mem 0xf7900000-0xf79fffff]
[ 0.299728] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 0.299728] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.299729] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
[ 0.299730] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.299730] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.299731] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.299732] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window]
[ 0.299732] pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
[ 0.299733] pci_bus 0000:01: resource 0 [io 0xd000-0xefff]
[ 0.299734] pci_bus 0000:01: resource 1 [mem 0xf7200000-0xf75fffff]
[ 0.299735] pci_bus 0000:02: resource 0 [io 0xd000-0xefff]
[ 0.299735] pci_bus 0000:02: resource 1 [mem 0xf7200000-0xf74fffff]
[ 0.299736] pci_bus 0000:03: resource 1 [mem 0xf7400000-0xf74fffff]
[ 0.299737] pci_bus 0000:06: resource 0 [io 0xe000-0xefff]
[ 0.299738] pci_bus 0000:06: resource 1 [mem 0xf7300000-0xf73fffff]
[ 0.299738] pci_bus 0000:07: resource 0 [io 0xd000-0xdfff]
[ 0.299739] pci_bus 0000:07: resource 1 [mem 0xf7200000-0xf72fffff]
[ 0.299740] pci_bus 0000:08: resource 0 [io 0xf000-0xffff]
[ 0.299740] pci_bus 0000:08: resource 1 [mem 0xf6000000-0xf70fffff]
[ 0.299741] pci_bus 0000:08: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.299742] pci_bus 0000:09: resource 1 [mem 0xf7600000-0xf78fffff]
[ 0.299742] pci_bus 0000:0a: resource 1 [mem 0xf7900000-0xf79fffff]
[ 0.299808] NET: Registered protocol family 2
[ 0.299928] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.300091] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.300211] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.300249] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.300286] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.300346] NET: Registered protocol family 1
[ 0.300600] pci 0000:08:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.300703] PCI: CLS 64 bytes, default 64
[ 0.300736] Unpacking initramfs...
[ 0.654325] Freeing initrd memory: 38472K
[ 0.654347] AMD-Vi: IOMMU performance counters supported
[ 0.654635] iommu: Adding device 0000:00:01.0 to group 0
[ 0.654733] iommu: Adding device 0000:00:01.3 to group 1
[ 0.654833] iommu: Adding device 0000:00:02.0 to group 2
[ 0.654933] iommu: Adding device 0000:00:03.0 to group 3
[ 0.655036] iommu: Adding device 0000:00:03.1 to group 4
[ 0.655132] iommu: Adding device 0000:00:04.0 to group 5
[ 0.655237] iommu: Adding device 0000:00:07.0 to group 6
[ 0.655336] iommu: Adding device 0000:00:07.1 to group 7
[ 0.655444] iommu: Adding device 0000:00:08.0 to group 8
[ 0.655540] iommu: Adding device 0000:00:08.1 to group 9
[ 0.655653] iommu: Adding device 0000:00:14.0 to group 10
[ 0.655665] iommu: Adding device 0000:00:14.3 to group 10
[ 0.655791] iommu: Adding device 0000:00:18.0 to group 11
[ 0.655803] iommu: Adding device 0000:00:18.1 to group 11
[ 0.655814] iommu: Adding device 0000:00:18.2 to group 11
[ 0.655825] iommu: Adding device 0000:00:18.3 to group 11
[ 0.655836] iommu: Adding device 0000:00:18.4 to group 11
[ 0.655847] iommu: Adding device 0000:00:18.5 to group 11
[ 0.655856] iommu: Adding device 0000:00:18.6 to group 11
[ 0.655867] iommu: Adding device 0000:00:18.7 to group 11
[ 0.655973] iommu: Adding device 0000:01:00.0 to group 12
[ 0.655992] iommu: Adding device 0000:01:00.1 to group 12
[ 0.656042] iommu: Adding device 0000:01:00.2 to group 12
[ 0.656053] iommu: Adding device 0000:02:00.0 to group 12
[ 0.656063] iommu: Adding device 0000:02:04.0 to group 12
[ 0.656071] iommu: Adding device 0000:02:05.0 to group 12
[ 0.656080] iommu: Adding device 0000:02:06.0 to group 12
[ 0.656090] iommu: Adding device 0000:02:07.0 to group 12
[ 0.656105] iommu: Adding device 0000:03:00.0 to group 12
[ 0.656122] iommu: Adding device 0000:06:00.0 to group 12
[ 0.656139] iommu: Adding device 0000:07:00.0 to group 12
[ 0.656255] iommu: Adding device 0000:08:00.0 to group 13
[ 0.656280] iommu: Adding device 0000:08:00.1 to group 13
[ 0.656372] iommu: Adding device 0000:09:00.0 to group 14
[ 0.656478] iommu: Adding device 0000:09:00.2 to group 15
[ 0.656576] iommu: Adding device 0000:09:00.3 to group 16
[ 0.656684] iommu: Adding device 0000:0a:00.0 to group 17
[ 0.656785] iommu: Adding device 0000:0a:00.2 to group 18
[ 0.656894] iommu: Adding device 0000:0a:00.3 to group 19
[ 0.657127] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
[ 0.657128] AMD-Vi: Extended features (0xf77ef22294ada):
[ 0.657129] PPR NX GT IA GA PC GA_vAPIC
[ 0.657131] AMD-Vi: Interrupt remapping enabled
[ 0.657131] AMD-Vi: virtual APIC enabled
[ 0.657264] AMD-Vi: Lazy IO/TLB flushing enabled
[ 0.657956] amd_uncore: AMD NB counters detected
[ 0.657960] amd_uncore: AMD LLC counters detected
[ 0.658376] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[ 0.658414] Scanning for low memory corruption every 60 seconds
[ 0.658970] Initialise system trusted keyrings
[ 0.658980] Key type blacklist registered
[ 0.659014] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[ 0.659678] zbud: loaded
[ 0.660070] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.660201] fuse init (API version 7.26)
[ 0.661682] Key type asymmetric registered
[ 0.661682] Asymmetric key parser 'x509' registered
[ 0.661701] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 0.661742] io scheduler noop registered
[ 0.661743] io scheduler deadline registered
[ 0.661759] io scheduler cfq registered (default)
[ 0.663470] pcieport 0000:00:01.3: AER enabled with IRQ 28
[ 0.663489] pcieport 0000:00:03.1: AER enabled with IRQ 29
[ 0.663502] pcieport 0000:00:07.1: AER enabled with IRQ 30
[ 0.663515] pcieport 0000:00:08.1: AER enabled with IRQ 31
[ 0.663562] efifb: probing for efifb
[ 0.663569] efifb: framebuffer at 0xf1000000, using 3072k, total 3072k
[ 0.663570] efifb: mode is 1024x768x32, linelength=4096, pages=1
[ 0.663570] efifb: scrolling: redraw
[ 0.663570] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.663651] Console: switching to colour frame buffer device 128x48
[ 0.663662] fb0: EFI VGA frame buffer device
[ 0.663740] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.663747] ACPI: Power Button [PWRB]
[ 0.663768] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.663807] ACPI: Power Button [PWRF]
[ 0.663863] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[ 0.663978] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[ 0.664066] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[ 0.664160] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[ 0.664255] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[ 0.664313] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[ 0.664429] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[ 0.664566] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[ 0.664706] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[ 0.664824] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[ 0.664968] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[ 0.665102] [Firmware Bug]: ACPI MWAIT C-state 0x0 not supported by HW (0x0)
[ 0.665324] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.686215] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.687729] Linux agpgart interface v0.103
[ 0.689842] loop: module loaded
[ 0.689940] libphy: Fixed MDIO Bus: probed
[ 0.689941] tun: Universal TUN/TAP device driver, 1.6
[ 0.689968] PPP generic driver version 2.4.2
[ 0.690001] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.690003] ehci-pci: EHCI PCI platform driver
[ 0.690009] ehci-platform: EHCI generic platform driver
[ 0.690014] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.690015] ohci-pci: OHCI PCI platform driver
[ 0.690020] ohci-platform: OHCI generic platform driver
[ 0.690023] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.690081] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 0.690085] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[ 0.745436] xhci_hcd 0000:01:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000048000410
[ 0.745549] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.745550] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.745551] usb usb1: Product: xHCI Host Controller
[ 0.745552] usb usb1: Manufacturer: Linux 4.15.0-88-generic xhci-hcd
[ 0.745552] usb usb1: SerialNumber: 0000:01:00.0
[ 0.745646] hub 1-0:1.0: USB hub found
[ 0.745657] hub 1-0:1.0: 10 ports detected
[ 0.750509] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 0.750511] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[ 0.750512] xhci_hcd 0000:01:00.0: Host supports USB 3.10 Enhanced SuperSpeed
[ 0.750537] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.750551] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.750552] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.750553] usb usb2: Product: xHCI Host Controller
[ 0.750554] usb usb2: Manufacturer: Linux 4.15.0-88-generic xhci-hcd
[ 0.750555] usb usb2: SerialNumber: 0000:01:00.0
[ 0.750633] hub 2-0:1.0: USB hub found
[ 0.750639] hub 2-0:1.0: 4 ports detected
[ 0.752657] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 0.752659] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
[ 0.811495] xhci_hcd 0000:03:00.0: hcc params 0x0200eec1 hci version 0x110 quirks 0x0000000000000010
[ 0.811709] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.811710] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.811711] usb usb3: Product: xHCI Host Controller
[ 0.811711] usb usb3: Manufacturer: Linux 4.15.0-88-generic xhci-hcd
[ 0.811712] usb usb3: SerialNumber: 0000:03:00.0
[ 0.811796] hub 3-0:1.0: USB hub found
[ 0.811801] hub 3-0:1.0: 2 ports detected
[ 0.811853] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 0.811854] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
[ 0.811856] xhci_hcd 0000:03:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 0.811880] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.811893] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.811894] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.811895] usb usb4: Product: xHCI Host Controller
[ 0.811895] usb usb4: Manufacturer: Linux 4.15.0-88-generic xhci-hcd
[ 0.811896] usb usb4: SerialNumber: 0000:03:00.0
[ 0.811974] hub 4-0:1.0: USB hub found
[ 0.811980] hub 4-0:1.0: 2 ports detected
[ 0.812083] xhci_hcd 0000:09:00.3: xHCI Host Controller
[ 0.812085] xhci_hcd 0000:09:00.3: new USB bus registered, assigned bus number 5
[ 0.812191] xhci_hcd 0000:09:00.3: hcc params 0x0270f665 hci version 0x100 quirks 0x0000000000000410
[ 0.812275] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.812276] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.812276] usb usb5: Product: xHCI Host Controller
[ 0.812277] usb usb5: Manufacturer: Linux 4.15.0-88-generic xhci-hcd
[ 0.812277] usb usb5: SerialNumber: 0000:09:00.3
[ 0.812352] hub 5-0:1.0: USB hub found
[ 0.812356] hub 5-0:1.0: 4 ports detected
[ 0.812463] xhci_hcd 0000:09:00.3: xHCI Host Controller
[ 0.812464] xhci_hcd 0000:09:00.3: new USB bus registered, assigned bus number 6
[ 0.812465] xhci_hcd 0000:09:00.3: Host supports USB 3.0 SuperSpeed
[ 0.812474] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.812485] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.812486] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.812486] usb usb6: Product: xHCI Host Controller
[ 0.812487] usb usb6: Manufacturer: Linux 4.15.0-88-generic xhci-hcd
[ 0.812487] usb usb6: SerialNumber: 0000:09:00.3
[ 0.812559] hub 6-0:1.0: USB hub found
[ 0.812565] hub 6-0:1.0: 4 ports detected
[ 0.812675] i8042: PNP: No PS/2 controller found.
[ 0.812742] mousedev: PS/2 mouse device common for all mice
[ 0.812872] rtc_cmos 00:02: RTC can wake from S4
[ 0.813072] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.813124] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.813128] i2c /dev entries driver
[ 0.813156] device-mapper: uevent: version 1.0.3
[ 0.813205] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 0.813550] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.813552] EFI Variables Facility v0.08 2004-May-17
[ 0.832721] NET: Registered protocol family 10
[ 0.835187] Segment Routing with IPv6
[ 0.835201] NET: Registered protocol family 17
[ 0.835239] Key type dns_resolver registered
[ 0.835969] mce: Using 23 MCE banks
[ 0.835980] RAS: Correctable Errors collector initialized.
[ 0.835996] microcode: CPU0: patch_level=0x08001137
[ 0.836000] microcode: CPU1: patch_level=0x08001137
[ 0.836030] microcode: CPU2: patch_level=0x08001137
[ 0.836043] microcode: CPU3: patch_level=0x08001137
[ 0.836051] microcode: CPU4: patch_level=0x08001137
[ 0.836057] microcode: CPU5: patch_level=0x08001137
[ 0.836073] microcode: CPU6: patch_level=0x08001137
[ 0.836085] microcode: CPU7: patch_level=0x08001137
[ 0.836098] microcode: CPU8: patch_level=0x08001137
[ 0.836111] microcode: CPU9: patch_level=0x08001137
[ 0.836124] microcode: CPU10: patch_level=0x08001137
[ 0.836136] microcode: CPU11: patch_level=0x08001137
[ 0.836170] microcode: Microcode Update Driver: v2.2.
[ 0.836178] sched_clock: Marking stable (836165079, 0)->(811804091, 24360988)
[ 0.836557] registered taskstats version 1
[ 0.836563] Loading compiled-in X.509 certificates
[ 0.837965] Loaded X.509 cert 'Build time autogenerated kernel key: f0020782f0d3a548186fb3f47aed88387a71e859'
[ 0.839704] Loaded UEFI:db cert 'ASUSTeK MotherBoard SW Key Certificate: da83b990422ebc8c441f8d8b039a65a2' linked to secondary sys keyring
[ 0.839831] Loaded UEFI:db cert 'ASUSTeK Notebook SW Key Certificate: b8e581e4df77a5bb4282d5ccfc00c071' linked to secondary sys keyring
[ 0.839849] Loaded UEFI:db cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to secondary sys keyring
[ 0.839864] Loaded UEFI:db cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to secondary sys keyring
[ 0.839995] Loaded UEFI:db cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' linked to secondary sys keyring
[ 0.840227] Couldn't get size: 0x800000000000000e
[ 0.840229] MODSIGN: Couldn't get UEFI MokListRT
[ 0.840916] zswap: loaded using pool lzo/zbud
[ 0.842851] Key type big_key registered
[ 0.842854] Key type trusted registered
[ 0.843730] Key type encrypted registered
[ 0.843731] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.843733] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 0.843736] ima: Allocated hash algorithm: sha1
[ 0.843749] evm: HMAC attrs: 0x1
[ 0.844095] Magic number: 8:329:524
[ 0.844254] rtc_cmos 00:02: setting system clock to 2020-02-27 08:32:11 UTC (1582792331)
[ 0.844486] acpi_cpufreq: overriding BIOS provided _PSD data
[ 0.844807] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.844807] EDD information not available.
[ 1.212057] usb 3-1: new full-speed USB device number 2 using xhci_hcd
[ 1.298535] Freeing unused kernel image memory: 2428K
[ 1.328457] Write protecting the kernel read-only data: 20480k
[ 1.329757] Freeing unused kernel image memory: 2008K
[ 1.329919] Freeing unused kernel image memory: 1880K
[ 1.336043] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.388558] ahci 0000:01:00.1: version 3.0
[ 1.388738] ahci 0000:01:00.1: SSS flag set, parallel bus scan disabled
[ 1.388772] ahci 0000:01:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x33 impl SATA mode
[ 1.388774] ahci 0000:01:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
[ 1.389867] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.390139] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 1.390139] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[ 1.392065] scsi host0: ahci
[ 1.392248] scsi host1: ahci
[ 1.392481] scsi host2: ahci
[ 1.392559] scsi host3: ahci
[ 1.392735] scsi host4: ahci
[ 1.392814] scsi host5: ahci
[ 1.392887] scsi host6: ahci
[ 1.392980] scsi host7: ahci
[ 1.393017] ata1: SATA max UDMA/133 abar m131072@0xf7580000 port 0xf7580100 irq 44
[ 1.393019] ata2: SATA max UDMA/133 abar m131072@0xf7580000 port 0xf7580180 irq 44
[ 1.393020] ata3: DUMMY
[ 1.393021] ata4: DUMMY
[ 1.393022] ata5: SATA max UDMA/133 abar m131072@0xf7580000 port 0xf7580300 irq 44
[ 1.393024] ata6: SATA max UDMA/133 abar m131072@0xf7580000 port 0xf7580380 irq 44
[ 1.393025] ata7: DUMMY
[ 1.393025] ata8: DUMMY
[ 1.393182] ahci 0000:0a:00.2: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[ 1.393183] ahci 0000:0a:00.2: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
[ 1.393344] scsi host8: ahci
[ 1.393369] ata9: SATA max UDMA/133 abar m4096@0xf7908000 port 0xf7908100 irq 46
[ 1.401437] r8169 0000:06:00.0 eth0: RTL8168h/8111h at 0x (ptrval), 18:31:bf:69:a3:43, XID 14100800 IRQ 47
[ 1.401438] r8169 0000:06:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.407501] r8169 0000:06:00.0 enp6s0: renamed from eth0
[ 1.611580] usb 3-1: New USB device found, idVendor=046d, idProduct=c52b
[ 1.611582] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.611583] usb 3-1: Product: USB Receiver
[ 1.611584] usb 3-1: Manufacturer: Logitech
[ 1.660080] tsc: Refined TSC clocksource calibration: 3892.686 MHz
[ 1.660091] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x7038b8db878, max_idle_ns: 881590710692 ns
[ 1.712708] ata9: SATA link down (SStatus 0 SControl 300)
[ 1.812457] usb 3-2: new low-speed USB device number 3 using xhci_hcd
[ 1.864457] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.865856] ata1.00: supports DRM functions and may not be fully accessible
[ 1.865876] ata1.00: ATA-10: CT500MX500SSD1, M3CR010, max UDMA/133
[ 1.865877] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 1.866429] ata1.00: supports DRM functions and may not be fully accessible
[ 1.866893] ata1.00: configured for UDMA/133
[ 1.867105] scsi 0:0:0:0: Direct-Access ATA CT500MX500SSD1 010 PQ: 0 ANSI: 5
[ 1.867287] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.867419] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 1.867420] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.867431] sd 0:0:0:0: [sda] Write Protect is off
[ 1.867432] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.867452] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.868553] sda: sda1 sda2
[ 1.868971] sd 0:0:0:0: [sda] supports TCG Opal
[ 1.868972] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.142831] usb 3-2: New USB device found, idVendor=046d, idProduct=c328
[ 2.142833] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.142834] usb 3-2: Product: USB Keyboard
[ 2.142835] usb 3-2: Manufacturer: Logitech
[ 2.169051] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.220640] usbcore: registered new interface driver usbhid
[ 2.220641] usbhid: USB HID core driver
[ 2.222707] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:01.3/0000:01:00.2/0000:02:00.0/0000:03:00.0/usb3/3-2/3-2:1.0/0003:046D:C328.0004/input/input2
[ 2.222809] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:03:00.0-1/input2
[ 2.280632] hid-generic 0003:046D:C328.0004: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:03:00.0-2/input0
[ 2.280805] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:01.3/0000:01:00.2/0000:02:00.0/0000:03:00.0/usb3/3-2/3-2:1.1/0003:046D:C328.0005/input/input3
[ 2.340611] hid-generic 0003:046D:C328.0005: input,hiddev1,hidraw2: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:03:00.0-2/input1
[ 2.344054] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.345702] ata2.00: ATAPI: DRW-24D5MT, 1.00, max UDMA/133
[ 2.346983] ata2.00: configured for UDMA/133
[ 2.348937] scsi 1:0:0:0: CD-ROM ASUS DRW-24D5MT 1.00 PQ: 0 ANSI: 5
[ 2.354392] input: Logitech M570 as /devices/pci0000:00/0000:00:01.3/0000:01:00.2/0000:02:00.0/0000:03:00.0/usb3/3-1/3-1:1.2/0003:046D:C52B.0003/0003:046D:1028.0006/input/input4
[ 2.354493] logitech-hidpp-device 0003:046D:1028.0006: input,hidraw3: USB HID v1.11 Mouse [Logitech M570] on usb-0000:03:00.0-1:1
[ 2.411816] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.411818] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.412062] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.412133] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.684610] clocksource: Switched to clocksource tsc
[ 2.729008] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.040171] ata6: SATA link down (SStatus 0 SControl 300)
[ 3.324426] random: fast init done
[ 3.327041] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 3.327051] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 3.327053] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 3.329497] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.425217] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.472773] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 3.492836] systemd[1]: Detected architecture x86-64.
[ 3.496837] systemd[1]: Set hostname to <benjamin-System-Product-Name>.
[ 3.573457] systemd[1]: Created slice System Slice.
[ 3.573505] systemd[1]: Listening on udev Kernel Socket.
[ 3.573512] systemd[1]: Reached target User and Group Name Lookups.
[ 3.573540] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 3.573572] systemd[1]: Listening on udev Control Socket.
[ 3.573599] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 3.573632] systemd[1]: Listening on Journal Socket (/dev/log).
[ 3.583216] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 3.587361] lp: driver loaded but no devices found
[ 3.589891] ppdev: user-space parallel port driver
[ 3.630321] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SSFS
[ 3.634847] systemd-journald[355]: Received request to flush runtime journal from PID 1
[ 3.693174] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[ 3.696195] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 3.726007] ccp 0000:09:00.2: enabling device (0000 -> 0002)
[ 3.726323] ccp 0000:09:00.2: ccp enabled
[ 3.726324] ccp 0000:09:00.2: enabled
[ 3.764726] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 3.764942] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 3.769450] ipmi message handler version 39.2
[ 3.772192] AVX2 version of gcm_enc/dec engaged.
[ 3.772194] AES CTR mode by8 optimization enabled
[ 3.775621] ipmi device interface
[ 3.823598] asus_wmi: ASUS WMI generic driver loaded
[ 3.827021] asus_wmi: Initialization: 0x0
[ 3.827059] asus_wmi: BIOS WMI version: 0.9
[ 3.827193] asus_wmi: SFUN value: 0x0
[ 3.827573] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input5
[ 3.827723] asus_wmi: Number of fans: 1
[ 3.849255] rtl8821ae 0000:07:00.0: enabling device (0000 -> 0003)
[ 3.861234] rtl8821ae: Using firmware rtlwifi/rtl8812aefw.bin
[ 3.861236] rtl8821ae: Using firmware rtlwifi/rtl8812aefw_wowlan.bin
[ 3.864542] rtl8821ae 0000:07:00.0: Direct firmware load for rtlwifi/rtl8812aefw_wowlan.bin failed with error -2
[ 3.864625] rtl8821ae 0000:07:00.0: Direct firmware load for rtlwifi/rtl8812aefw.bin failed with error -2
[ 3.870899] rtlwifi: Loading alternative firmware rtlwifi/rtl8821aefw.bin
[ 3.870907] rtlwifi: Loading alternative firmware rtlwifi/rtl8821aefw.bin
[ 3.889646] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 3.889811] rtlwifi: rtlwifi: wireless switch is on
[ 3.891121] rtl8821ae 0000:07:00.0 wlp7s0: renamed from wlan0
[ 3.957511] snd_hda_intel 0000:08:00.1: Disabling MSI
[ 3.957515] snd_hda_intel 0000:08:00.1: Handle vga_switcheroo audio client
[ 3.957589] snd_hda_intel 0000:0a:00.3: enabling device (0000 -> 0002)
[ 3.971182] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 3.971183] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 3.971184] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 3.971185] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 3.971186] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x11/0x0
[ 3.971186] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 3.971187] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
[ 3.971188] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
[ 3.971188] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
[ 3.983666] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:0a:00.3/sound/card1/input6
[ 3.983708] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:0a:00.3/sound/card1/input7
[ 3.983747] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:0a:00.3/sound/card1/input8
[ 3.984825] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:08.1/0000:0a:00.3/sound/card1/input9
[ 3.984870] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:0a:00.3/sound/card1/input10
[ 4.019768] PKCS#7 signature not signed with a trusted key
[ 4.019780] nvidia: loading out-of-tree module taints kernel.
[ 4.019786] nvidia: module license 'NVIDIA' taints kernel.
[ 4.019787] Disabling lock debugging due to kernel taint
[ 4.019829] kvm: Nested Virtualization enabled
[ 4.019833] kvm: Nested Paging enabled
[ 4.019834] SVM: Virtual VMLOAD VMSAVE supported
[ 4.019834] SVM: Virtual GIF supported
[ 4.024417] MCE: In-kernel MCE decoding enabled.
[ 4.025755] EDAC amd64: Node 0: DRAM ECC disabled.
[ 4.025757] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 4.026203] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[ 4.031781] nvidia-nvlink: Nvlink Core is being initialized, major device number 239
[ 4.032173] nvidia 0000:08:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[ 4.034738] random: crng init done
[ 4.034739] random: 7 urandom warning(s) missed due to ratelimiting
[ 4.131650] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 435.21 Sun Aug 25 08:17:57 CDT 2019
[ 4.141786] PKCS#7 signature not signed with a trusted key
[ 4.169363] PKCS#7 signature not signed with a trusted key
[ 4.193061] EDAC amd64: Node 0: DRAM ECC disabled.
[ 4.193063] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 4.193215] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 435.21 Sun Aug 25 08:07:52 CDT 2019
[ 4.200150] PKCS#7 signature not signed with a trusted key
[ 4.200152] PKCS#7 signature not signed with a trusted key
[ 4.200945] [drm] [nvidia-drm] [GPU ID 0x00000800] Loading driver
[ 4.200947] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:08:00.0 on minor 0
[ 4.218272] PKCS#7 signature not signed with a trusted key
[ 4.260623] EDAC amd64: Node 0: DRAM ECC disabled.
[ 4.260625] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 4.262357] nvidia-uvm: Loaded the UVM driver, major device number 237.
[ 4.597375] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000dffff window]
[ 4.597472] caller os_map_kernel_space.part.10+0x74/0x90 [nvidia] mapping multiple BARs
[ 4.600503] EDAC amd64: Node 0: DRAM ECC disabled.
[ 4.600504] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 4.632658] audit: type=1400 audit(1582792335.284:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=768 comm="apparmor_parser"
[ 4.632925] audit: type=1400 audit(1582792335.284:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=767 comm="apparmor_parser"
[ 4.633198] audit: type=1400 audit(1582792335.284:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=770 comm="apparmor_parser"
[ 4.633224] audit: type=1400 audit(1582792335.284:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=766 comm="apparmor_parser"
[ 4.633225] audit: type=1400 audit(1582792335.284:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=766 comm="apparmor_parser"
[ 4.633232] audit: type=1400 audit(1582792335.284:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=766 comm="apparmor_parser"
[ 4.633498] audit: type=1400 audit(1582792335.284:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=774 comm="apparmor_parser"
[ 4.633799] audit: type=1400 audit(1582792335.284:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=772 comm="apparmor_parser"
[ 4.634087] audit: type=1400 audit(1582792335.284:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=776 comm="apparmor_parser"
[ 4.860883] EDAC amd64: Node 0: DRAM ECC disabled.
[ 4.860884] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 4.992483] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:08:00.1/sound/card0/input11
[ 4.992524] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:08:00.1/sound/card0/input12
[ 5.020405] EDAC amd64: Node 0: DRAM ECC disabled.
[ 5.020406] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 5.096568] EDAC amd64: Node 0: DRAM ECC disabled.
[ 5.096569] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 5.188573] EDAC amd64: Node 0: DRAM ECC disabled.
[ 5.188574] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 5.272666] EDAC amd64: Node 0: DRAM ECC disabled.
[ 5.272667] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 5.360462] EDAC amd64: Node 0: DRAM ECC disabled.
[ 5.360463] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 5.402167] IPv6: ADDRCONF(NETDEV_UP): enp6s0: link is not ready
[ 5.454651] r8169 0000:06:00.0 enp6s0: link down
[ 5.454748] IPv6: ADDRCONF(NETDEV_UP): enp6s0: link is not ready
[ 5.457319] IPv6: ADDRCONF(NETDEV_UP): wlp7s0: link is not ready
[ 5.468541] EDAC amd64: Node 0: DRAM ECC disabled.
[ 5.468542] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 5.681458] rtl8821ae: Polling FW ready fail!! REG_MCUFWDL:0x00070706 .
[ 5.884826] IPv6: ADDRCONF(NETDEV_UP): wlp7s0: link is not ready
[ 5.948599] EDAC amd64: Node 0: DRAM ECC disabled.
[ 5.948600] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 5.952146] IPv6: ADDRCONF(NETDEV_UP): wlp7s0: link is not ready
[ 6.403626] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000dffff window]
[ 6.403728] caller os_map_kernel_space.part.10+0x74/0x90 [nvidia] mapping multiple BARs
[ 9.067064] wlp7s0: authenticate with a0:1b:29:c8:38:81
[ 9.067908] wlp7s0: send auth to a0:1b:29:c8:38:81 (try 1/3)
[ 9.085171] wlp7s0: authenticated
[ 9.092055] wlp7s0: associate with a0:1b:29:c8:38:81 (try 1/3)
[ 9.200055] wlp7s0: associate with a0:1b:29:c8:38:81 (try 2/3)
[ 9.304068] wlp7s0: associate with a0:1b:29:c8:38:81 (try 3/3)
[ 9.408057] wlp7s0: association with a0:1b:29:c8:38:81 timed out
[ 9.616458] wlp7s0: authenticate with a0:1b:29:c8:38:80
[ 9.617749] wlp7s0: send auth to a0:1b:29:c8:38:80 (try 1/3)
[ 9.620170] wlp7s0: authenticated
[ 9.624459] wlp7s0: associate with a0:1b:29:c8:38:80 (try 1/3)
[ 9.628949] wlp7s0: RX AssocResp from a0:1b:29:c8:38:80 (capab=0x431 status=0 aid=3)
[ 9.634304] wlp7s0: associated
[ 9.646075] IPv6: ADDRCONF(NETDEV_CHANGE): wlp7s0: link becomes ready
[ 15.613624] logitech-hidpp-device 0003:046D:1028.0006: HID++ 1.0 device connected.
[ 17.128719] rfkill: input handler disabledConcernant mais données je ne comprends pas, quel est le problème ?
Hors ligne
#153 Le 27/02/2020, à 10:52
- NicoApi73
Re : [Résolu] Linux Ubuntu ne redémarre plus.
un dissident a écrit :
Concernant mais données je ne comprends pas, quel est le problème ?
Bonjour,
Aucun problème, j'expliquais juste comment utiliser l'archive de manière graphique, pour récupérer ce qui t'intéressait et le replacer dans ton home. Si tu as déjà récupéré tes données, oublie 
Je regarderai ton retour en détail un peu plus tard. A première vue, je ne vois rien de spécial, ça boote en une dizaine de seconde. Si c'est l'interface graphique qui met du temps, je ne sais pas comment optimiser
Hors ligne
#154 Le 27/02/2020, à 11:03
- un dissident
Re : [Résolu] Linux Ubuntu ne redémarre plus.
NicoApi73 a écrit :
un dissident a écrit :Concernant mais données je ne comprends pas, quel est le problème ?
Bonjour,
Aucun problème, j'expliquais juste comment utiliser l'archive de manière graphique, pour récupérer ce qui t'intéressait et le replacer dans ton home. Si tu as déjà récupéré tes données, oublie
Je regarderai ton retour en détail un peu plus tard. A première vue, je ne vois rien de spécial, ça boote en une dizaine de seconde. Si c'est l'interface graphique qui met du temps, je ne sais pas comment optimiser
Oui toutes mes données ont été récupérées, tout va bien de ce côté là.
Hors ligne
#155 Le 27/02/2020, à 11:09
- nany
Re : [Résolu] Linux Ubuntu ne redémarre plus.
NicoApi73 a écrit :
ça boote en une dizaine de seconde.
Oui, ce n’est pas long.
Donne les retours de :
systemd-analyzecat /etc/initramfs-tools/conf.d/resumeHors ligne
#156 Le 27/02/2020, à 11:44
- un dissident
Re : [Résolu] Linux Ubuntu ne redémarre plus.
nany a écrit :
NicoApi73 a écrit :ça boote en une dizaine de seconde.
Oui, ce n’est pas long.
Donne les retours de :
systemd-analyzecat /etc/initramfs-tools/conf.d/resume
Bonjour,
le résultat de la commande "systemd-analyze":
Startup finished in 16.996s (firmware) + 11.734s (loader) + 3.397s (kernel) + 8.117s (userspace) = 40.245s
graphical.target reached after 8.073s in userspacecelui de la commande "cat /etc/initramfs-tools/conf.d/resume":
cat: /etc/initramfs-tools/conf.d/resume: Aucun fichier ou dossier de ce typeHors ligne
#157 Le 27/02/2020, à 12:10
- nany
Re : [Résolu] Linux Ubuntu ne redémarre plus.
Rien d’anormal. Quarante secondes, c’est plutôt correct. Tu as vraiment le sentiment que le temps de démarrage est beaucoup plus long ?
Il est possible d’agir sur GRUB pour grappiller quelques secondes. Donne le retour de :
cat /etc/default/grubHors ligne
#158 Le 27/02/2020, à 12:28
- un dissident
Re : [Résolu] Linux Ubuntu ne redémarre plus.
nany a écrit :
Rien d’anormal. Quarante secondes, c’est plutôt correct. Tu as vraiment le sentiment que le temps de démarrage est beaucoup plus long ?
Il est possible d’agir sur GRUB pour grappiller quelques secondes. Donne le retour de :
cat /etc/default/grub
Oui environ 2X plus long que sur Ubuntu 19.10.
Le résultat de la commande "cat /etc/default/grub":
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"Hors ligne
#159 Le 27/02/2020, à 12:38
- nany
Re : [Résolu] Linux Ubuntu ne redémarre plus.
OK, donne les retours de :
sudo sed -i 's/\(GRUB_TIMEOUT=\).*/\11/' /etc/default/grub && cat /etc/default/grubsudo update-grubHors ligne
#160 Le 27/02/2020, à 13:05
- un dissident
Re : [Résolu] Linux Ubuntu ne redémarre plus.
nany a écrit :
OK, donne les retours de :
sudo sed -i 's/\(GRUB_TIMEOUT=\).*/\11/' /etc/default/grub && cat /etc/default/grubsudo update-grub
Résultat de "sudo sed -i 's/\(GRUB_TIMEOUT=\).*/\11/' /etc/default/grub && cat /etc/default/grub":
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=1
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"et résultat de "sudo update-grub":
Sourcing file `/etc/default/grub'
Création du fichier de configuration GRUB…
Image Linux trouvée : /boot/vmlinuz-4.15.0-88-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.15.0-88-generic
Image Linux trouvée : /boot/vmlinuz-4.15.0-29-generic
Image mémoire initiale trouvée : /boot/initrd.img-4.15.0-29-generic
Adding boot menu entry for EFI firmware configuration
faitHors ligne
#161 Le 27/02/2020, à 13:14
- moko138
Re : [Résolu] Linux Ubuntu ne redémarre plus.
À l'avenir, merci de penser à toujours donner des retours complets.
Un retour complet doit contenir toutes les lignes, et entières,
depuis celle de la commande
jusqu'à la ligne attendant la commande suivante, exemple :
moi@mon-pc~$: ma-commande
son retour
moi@mon-pc~$: Et ce, MÊME POUR UN RETOUR VIDE !
Ex :
moko@pc-c:~$ sudo apt-get clean
moko@pc-c:~$moko@pc-c:~$ dpkg --list | grep Napoléon-Ier_aime_Game-of-Thrones
moko@pc-c:~$ .
Faute de quoi, il manque souvent à ceux qui tentent de t'aider des éléments essentiels.
(Plus de détails dans ce message-ci Retour utilisable de commande.)
(Et si tu ne veux pas divulguer ton nom d'user, tu le remplaces par toto.)
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#162 Le 27/02/2020, à 13:49
- nany
Re : [Résolu] Linux Ubuntu ne redémarre plus.
Bien, redémarre et redonne le retour de :
systemd-analyzeEt dis-nous aussi si tu as le sentiment que le temps de démarrage est revenu comme avant.
Hors ligne
#163 Le 27/02/2020, à 14:31
- un dissident
Re : [Résolu] Linux Ubuntu ne redémarre plus.
nany a écrit :
Bien, redémarre et redonne le retour de :
systemd-analyzeEt dis-nous aussi si tu as le sentiment que le temps de démarrage est revenu comme avant.
Le résultat de la commande "systemd-analyze":
benjamin@benjamin-System-Product-Name:~$ systemd-analyze
Startup finished in 17.142s (firmware) + 2.735s (loader) + 3.425s (kernel) + 19.082s (userspace) = 42.385s
graphical.target reached after 7.947s in userspace
benjamin@benjamin-System-Product-Name:~$Le temps me paraît un peu plus court mais je n'en suis pas certain, par contre ce qui m'intrigue c'est le temps total de 42.385s donné par le résultat de la commande "systemd-analyse" qui ne correspond pas avec le temps réel de redémarrage qui m'a paru beaucoup plus court.
Dernière modification par un dissident (Le 27/02/2020, à 14:35)
Hors ligne
#164 Le 27/02/2020, à 14:37
- nany
Re : [Résolu] Linux Ubuntu ne redémarre plus.
2.735s (loader)On a gagné neuf secondes.
un dissident a écrit :
par contre ce qui m'intrigue c'est le temps total de 42.385s donné par le résultat de la commande "systemd-analyse" qui ne correspond pas avec le temps réel de redémarrage qui me paraît beaucoup plus court.
graphical.target reached after 7.947s in userspaceL’interface graphique apparaît en fait au bout de huit secondes sur les dix-neuf. 
Dernière modification par nany (Le 27/02/2020, à 14:38)
Hors ligne
#165 Le 27/02/2020, à 14:52
- un dissident
Re : [Résolu] Linux Ubuntu ne redémarre plus.
nany a écrit :
2.735s (loader)On a gagné neuf secondes.
un dissident a écrit :par contre ce qui m'intrigue c'est le temps total de 42.385s donné par le résultat de la commande "systemd-analyse" qui ne correspond pas avec le temps réel de redémarrage qui me paraît beaucoup plus court.
graphical.target reached after 7.947s in userspaceL’interface graphique apparaît en fait au bout de huit secondes sur les dix-neuf.
Merci pour ton aide.
Donc si je comprends bien, une fois l'interface graphique affichée le système continue de charger des données pendant 34.438s (42.385s-7.947s) c'est bien ça ?
Dernière modification par un dissident (Le 27/02/2020, à 14:53)
Hors ligne
#166 Le 27/02/2020, à 15:01
- nany
Re : [Résolu] Linux Ubuntu ne redémarre plus.
Euh, moi ce que je comprends c’est 19.082s - 7.947s (en plus de 17.142s (firmware) + 2.735s (loader) + 3.425s (kernel)).
Pour voir, donne le retour de :
systemd-analyze --no-pager blameDernière modification par nany (Le 27/02/2020, à 15:02)
Hors ligne
#167 Le 27/02/2020, à 15:04
- moko138
Re : [Résolu] Linux Ubuntu ne redémarre plus.
nany, j'ai besoin de renfort en ./viewtopic.php?pid=22227797#p22227797
Ce que ne laissent pas transparaître les retours de commande, c'est que hcm est bloqué indéfiniment sur le menu de grub sauf s'il appuie sur "Entrée".
Merci !
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#168 Le 27/02/2020, à 15:05
- un dissident
Re : [Résolu] Linux Ubuntu ne redémarre plus.
nany a écrit :
Euh, moi ce que je comprends c’est 19.082s - 7.947s (en plus de 17.142s (firmware) + 2.735s (loader) + 3.425s (kernel)).
Pour voir, donne le retour de :
systemd-analyze --no-pager blame
Voilà le résultat:
benjamin@benjamin-System-Product-Name:~$ systemd-analyze --no-pager blame
11.142s apt-daily.service
6.079s NetworkManager-wait-online.service
704ms dev-sda2.device
569ms systemd-resolved.service
566ms systemd-timesyncd.service
540ms keyboard-setup.service
439ms plymouth-quit-wait.service
399ms fwupd.service
362ms systemd-rfkill.service
333ms systemd-logind.service
291ms systemd-journal-flush.service
263ms snapd.service
250ms udisks2.service
246ms snap-gnome\x2dcharacters-103.mount
238ms snap-gnome\x2dlogs-37.mount
228ms NetworkManager.service
192ms snap-gnome\x2dcalculator-180.mount
146ms snap-gnome\x2dsystem\x2dmonitor-51.mount
137ms ModemManager.service
131ms dev-loop2.device
130ms networkd-dispatcher.service
126ms dev-loop1.device
126ms snap-gnome\x2d3\x2d26\x2d1604-70.mount
118ms gpu-manager.service
111ms snap-gtk\x2dcommon\x2dthemes-319.mount
110ms grub-common.service
107ms accounts-daemon.service
107ms dev-loop3.device
97ms apparmor.service
93ms apport.service
86ms snap-core-4917.mount
85ms thermald.service
84ms avahi-daemon.service
83ms speech-dispatcher.service
78ms dev-loop0.device
76ms rsyslog.service
69ms systemd-fsck@dev-disk-by\x2duuid-30D3\x2dAAD7.service
68ms bolt.service
58ms dev-loop4.device
56ms motd-news.service
55ms boot-efi.mount
51ms upower.service
49ms systemd-udev-trigger.service
48ms systemd-journald.service
46ms swapfile.swap
33ms packagekit.service
32ms systemd-tmpfiles-setup-dev.service
31ms systemd-udevd.service
30ms user@1000.service
28ms wpa_supplicant.service
26ms systemd-tmpfiles-clean.service
24ms systemd-update-utmp.service
21ms dev-loop5.device
20ms user@121.service
19ms systemd-modules-load.service
19ms systemd-tmpfiles-setup.service
18ms polkit.service
16ms networking.service
15ms dev-loop6.device
15ms systemd-sysctl.service
14ms plymouth-start.service
14ms snapd.seeded.service
12ms dns-clean.service
11ms gdm.service
11ms plymouth-read-write.service
10ms colord.service
8ms systemd-random-seed.service
8ms kerneloops.service
6ms systemd-remount-fs.service
6ms alsa-restore.service
6ms dev-hugepages.mount
5ms ureadahead-stop.service
5ms dev-mqueue.mount
5ms kmod-static-nodes.service
5ms ufw.service
4ms systemd-update-utmp-runlevel.service
3ms rtkit-daemon.service
3ms nvidia-persistenced.service
2ms sys-kernel-debug.mount
2ms systemd-user-sessions.service
2ms console-setup.service
2ms pppd-dns.service
2ms sys-fs-fuse-connections.mount
1ms sys-kernel-config.mount
1ms setvtrgb.service
1ms snapd.socket
benjamin@benjamin-System-Product-Name:~$Hors ligne
#169 Le 27/02/2020, à 15:18
- nany
Re : [Résolu] Linux Ubuntu ne redémarre plus.
Tout ça semble très correct.
439ms plymouth-quit-wait.serviceTu ne dois pas avoir le temps de voir l’écran de chargement.
Hors ligne
#170 Le 27/02/2020, à 15:39
- un dissident
Re : [Résolu] Linux Ubuntu ne redémarre plus.
nany a écrit :
Tout ça semble très correct.
439ms plymouth-quit-wait.serviceTu ne dois pas avoir le temps de voir l’écran de chargement.
D'accord, eh bien merci pour tout.
Hors ligne
#171 Le 27/02/2020, à 15:56
- NicoApi73
Re : [Résolu] Linux Ubuntu ne redémarre plus.
Si tu es dépanné, peux tu passer ton sujet en résolu, en éditant ton premier message et en modifiant le titre (ajout en tête de titre de [Résolu]).
Merci
@nany : Merci pour ton support sur le temps de démarrage
Hors ligne
#172 Le 27/02/2020, à 16:14
- un dissident
Re : [Résolu] Linux Ubuntu ne redémarre plus.
NicoApi73 a écrit :
Si tu es dépanné, peux tu passer ton sujet en résolu, en éditant ton premier message et en modifiant le titre (ajout en tête de titre de [Résolu]).
Merci
@nany : Merci pour ton support sur le temps de démarrage
C'est fait.
Merci également à toi pour ton aide précieuse.
Hors ligne