[Résolu] Récupération de données EXT4 / accès système ou réinstall

pigrosol · Le 07/09/2020, à 17:20

Bonjour tout le monde,

Je survole ma situation rapidement afin de présenter le contexte de mon problème qui j'espère trouvera une solution;

Ancien usager de windows, j'ai enfin passer le pas pour être 100% linuxien;
J'ai donc formater entièrement le hdd (sata) de mon portable _il y a 2 ou 3 semaines_;
J'y ai installé la dernière version de Ubuntu LTS (20.04.*);
Je précise c'est avec un boot uefi.
C'est un disque de 500Go, avec donc les deux partitions qui se créées lors d'une installation classique : j'ai mis 100Go pour la première (system) et 400Go pour la seconde (ext4); il restait un espace libre de 1Mo après.
Lors de l'installation j'avais de connecté un clavier gamer usb, et une souris.

Cette semaine j'ai voulu utilisé mon pc chez ma copine, je n'ai pas pris le clavier/souris;
Ubuntu ne démarre pas, je tombe sur le shell.
Je démarre le pc avec un live-usb, l'outil Disque et Q-Parted me permet bien de voir les 3 partitions crées lors de l'installation. Je ne suis pas sur si à ce moment là je pouvais accéder à mes données je pensais pouvoir facilement régler ce prob de démarrage.
Je lance plusieurs fois l'outil de réparation de démarrage (boot-repair) inclus dans Ubuntu (même version) a travers une version live-usb, sans succès.

Après une recherche sur le web et ici, je fais sur le terminal une réparation des erreurs avec (si je me rappelle bien) fsck;
j'ai pas pris de photo de la ligne de commande, mais j'en ai une fois l'outil lancé (elles sont malheureusement incomplètes), ça donne _en extrait_:

ata5.00: irq_stat 0x40000008
ata5: SError: { CommWake }
ata5.00: failed commande: READ FPDMA QUEUD

[..... d'autres trucs .....]

[ 539.683459] ata5.00: status: { DRDY ERR  }
[ 539.683868] ata5.00: error: { UNC }
[ 540.033749] blk_update_request: I/O error, dev sda, sect**[il me manque la suite]
  flags 0x0 phys_seg 1 prio class 0
[ 540.034243] Buffer I/O error on dev sda2, logical block **** read
Error reading block 51904545 (Input/output error) while getting scan. Ignore error<y>?

Donc en gros, pas moyen de démarrer : erreur d'I/O;
après une autre recherche je me rends compte que c'est peut-être du au fait que le clavier avec lequel j'ai installé et toujours utilisé qui n'était pas branché;
si j'aurais su ... mais bon le mal est fait.

Après la réparation de toutes les erreurs (nombreuses) je n'ai plus accès qu'a l'interface en ligne de commande de grub; (pas grub rescue)
" grub>"

et plus moyens de faire des commandes pour travailler sur le dd.

En relançant une version live-ubuntu, dans l'outil "disque" et Q-parted, mon disque apparaît comme sans partitions, le disque est bien reconnu mais on ne me propose que de créer des partitions, formater, ... (cela même en étant connecté par usb en disque externe)

Heureusement avec l'outil boot-repair j'ai pu récupérer des fichers et notamment "partition_table.dmp"
et une "current_mbr.img". (j'ai aussi boot-repair.log, boot-info_20200829_**.txt pour 3jours, le fichier partition est identique)

Voici le contenu du fichier partition_table.dmp

label: gpt
label-id: 153BB942-48BA-4B9C-A390-44F5DCBE08F8
device: /dev/sda
unit: sectors
first-lba: 34
last-lba: 976773134

/dev/sda1 : start=        2048, size=     1048576, type=C12A7328-F81F-11D2-BA4B-00A0C93EC93B, uuid=F56B5F1C-ECF0-4A90-8FAD-CC296A02A8CF, name="EFI System Partition"
/dev/sda2 : start=     1050624, size=   975720448, type=0FC63DAF-8483-4772-8E79-3D69D8477DE4, uuid=1DC73EB9-4841-4156-B9AB-8AB03C832EBA

Les données à récupérer sont sur la partition 2 de 400Go (ext4); il y a environ 70Go de données, principalement des photos et des fichiers textes (le plus important), après de la musique, quelques films et vidéos.

Ayant lu quelques discussions, j'ai vu que ça pouvait davantage endommager le dd du coup j'ai préféré poster pour être sur de pouvoir récupérer mes données.

Via l'outil Disque (ou Q-parted) j'ai vu que l'on pouvait réécrire la table de partition, du coup je voudrais savoir si :
1- je peux utiliser les fichiers partition_table et current_mbr pour recréer le boot initial et réutiliser mon pc tel quel sans avoir à réinstaller ?
2- recréer la table de partition avec le fichier .dmp et accéder à mes fichiers, les sauvegarder; puis ensuite formater et réinstaller Ubuntu ?

-> pour réécrire la table de partition, je suppose que c'est mieux que je remettre mon DD dans le pc pour qu'il soit reconnu en sda, plutôt que de le garder connecter en externe; merci de me confirmer
-> quand je remet le dd dans le pc et boot, je tombe sur le grub en ligne de commande, est-ce que c'est mieux de passer par là pour réécrire la table de partition (j'ai récupéré un pdf avec les commandes de grub mais je ne sais pas s'il s'agit de la même version que celui installé sur mon pc; sinon quelle seraient les commandes), ou de le faire avec une live-usb et l'outil Disque/Q-parted ?

3- quelles sont les autres manip qui peuvent augmentés la probabilité de récupération de mes données ?

Merci beaucoup pour votre temps et votre attention.
pigroSol

Dernière modification par pigrosol (Le 20/09/2020, à 01:35)

Yannou90 · Le 07/09/2020, à 19:55

Bonjour

Alors de suite je te dis "STOP" : la première des choses en cas de soucis de pertes de données est de ne plus rien faire!

Comprends que tes données sont récupérables, voir mêmes restaurer ton disque, à la condition qu'aucunes autres données n'est été écrites dessus, et que le disque dur fonctionne correctement.

Utilise un live-cd, celui que tu as sous la main et installe testdisk, il est présent dans les dépôts.

Munis toi également d'un support amovible d'une taille équivalente ou supérieur a ton disque.

Lance testdisk avec les droits root depuis une session live.

Ne tente pas de réparer le mbr ou autre mais préfère recopier la ou les partitions perdu voir une image disque, il est plus facile de travailler sur une image disque, cela évite d'écraser , abîmer ou perdre les données du disque.

Si tu as récupérer les images des partitions ou du disque complet en lieu sur, tu peux te permettre de travailler sur le disque.

Rends toi sur la doc officiel de testdisk pour plus d'info, en cas de difficulté n'hésite pas à poster ici avec les logs de testdisk.

pigrosol · Le 09/09/2020, à 23:48

Salut Yannou,

déjà merci pour ta réponse.
depuis que j'ai posté ma requête je n'ai pas essayé de me servir du disque.
j'ai pas répondu avant parce que je n'étais pas chez moi.

Là je l'ai remis dans le pc portable et j'ai démarré en live-usb, dans Q-parted et Disque mon disque réapparaît avec la table de partitions correct !
En faite la partition 1 (sda1) fait 537mo en FAT elle se monte normalement et le contenu semble correct : elle contient un dossier EFI qui lui même contient un dossier BOTT et un autre ubuntu.
Concernant la partition 2 (sda2) elle fait 465,26go en ext4 (il y a 64,26gio utilisé) mais même si j'arrive à la monter, elle prend un peu plus de temps que dab (+/-2s) mais dans l'explorateur de fichier elle m'affiche comme si il n'y avait pas de fichiers, rien...
quand le un fait "ls" sur le dossier via le terminal ça me met "Erreur d'entré/sortie" ...

Bon je vois quel dde utiliser pour faire une copie et je revient après l'avoir fait.

Yannou90 · Le 10/09/2020, à 12:35

Lorsque tu monte la partition en "Erreur d'entré/sortie", pourrais tu nous donner le retour de :

dmesg

Merci.

geole · Le 10/09/2020, à 12:38

Bonjour
Avant d'utiliser testdisk, il faut dupliquer le disque ou la partition de données sur un autre disque avec ddrescue.
Pour bien utiliser ddrescue il faut d'abord faire un état du disque avec gsmartcontrol afin de savoir si c'est jouable sans trop de risques
https://doc.ubuntu-fr.org/smartmontools
Donc, en "live-usb"

sudo apt-get install --no-install-recommends smartmontools

sudo smartctl -s on -a /dev/sdX

en remplaçant X par la bonne lettre.

https://doc.ubuntu-fr.org/ddrescue

sudo add-apt-repository "deb http://archive.ubuntu.com/ubuntu $(lsb_release -sc) universe"
sudo apt-get update
sudo apt install gddrescue

Pour la suite on verra.
L'idée serait de seulement dupliquer la partition de données de 400 Go dans une autre partition d'un autre disque
Sinon, c'est la duplication entière du disque dans un autre disque qui est alors détruit ou dans un fichier de 500 Go. Mais la codification de la récupération est un peu plus difficile car il faut ajouter la fonctionnalité loop

Tu peux rebrancher ton disque dans l'ordinateur à condition de toujours booter avec le support d'installation.
ou mettre un nouveau disque à la place dans le but d'économiser les prises USB3 si tu n'en as pas beaucoup.

NOTA. Il est possible que certains de tes fichiers aient été migré dans le répertoire "lost+found" suite à la commande "fsck"

Dernière modification par geole (Le 10/09/2020, à 12:58)

pigrosol · Le 10/09/2020, à 23:48

salut,

merci pour vos réponses.

pour info, le disque est donc bien remis à sa place et depuis je n'ai que démarrer sur une live-usb.

j'ai fait les manip proposé par geole après avoir installé smartctl et ddrescue
et je viens de lancer une copie de la partition 2 de mon dd interne, en suivant les indications sur la page https://doc.ubuntu-fr.org/ddrescue,
j'ai lancé :

sudo ddrescue -f -n -b512 /dev/sda2 /dev/sdc1 /home/ubuntu/log-recup/suivi

a priori j'en ai pour 3/4h ...
je n'ai pas enregistré dans un fichier vu que j'ai un disque complet a dispo (formater pour l'occasion en fat32)

ensuite je ferais la commande dmesg comme demandé par Yannou (je le fais après parce que dans ddrescue il disait de ne pas monter le disque, ce qui (me semble) nécessaire pour avoir des infos avec dmesg ..

je vous reviens d'ici quelques heures

(une fois la copie faite je ne sais pas comment faire)

geole · Le 11/09/2020, à 00:17

Bon courage.

Il n'est pas trop tard pour publier le rapport smartctl. j'espère que tu t'en es servi pour mettre le paramétre -b512

S'il y a plantage, laisse ton ordinateur tourner afin de pouvoir repartir avec le fichier de suivi.

tu aurais du créer une petite partition qui aurait hébergé le fichier de suivi car je ne pense pas que ton support d'installation soit persistant.

La durée dépend de la difficulté de lire les secteurs en mauvais états qui vont être rencontrés.
Cela peut durer des jours.

Une fois la copie faite, il faut lui faire un fsck
puis tu peux alors accéder normalement aux fichiers en bon état
et aux fichiers en mauvais état du répertoire lost+found.
Tu peux ne pas avoir tout récupéré.
Dans ce cas, tu sauvegardes tout ce que tu as récupéré correctement ailleurs puis tu supprimes avec la fonctionnalité wipe qui écrase en mettant des zéros à la place des fichiers. Il te restera alors à lancer photorec pour tenter de récupérer ce qui à été oublié.

Dernière modification par geole (Le 11/09/2020, à 01:16)

pigrosol · Le 11/09/2020, à 00:43

re,
oui pas sur a 100% pour le b512 mais il me semble bien que c'était bien 512 octects par secteur.

Je vais voir pour récupérer le rapport de smartctl (en photo au pire car là je suis avec un autre pc à coté pour laisser la copie se faire seule et éviter les troub)

Le support usb-live est bien persistent, j'ai mis 4go, celle d'avant en avait qu'un et je l'avais remplis; ça me laissera plus de place.

à date, sur le ddrescue j'ai casi 13% du disque fait (64go+/-) , 0 bad-sector, 0 bad areas, 3 read errors,
le current-rate est à 44105kb/s (ça change);

étant donné qu'il n'y a que environ 70go de données et le reste vierge, je ne sais pas s'il copie l'espace avec les données ou celui vide (?); s'il copie les données, une fois que les 70go seront copié ça ne devrait pas durée beaucoup plus longtemps.

je suis entrain de regarder les infos sur testdisk

p-s: j'ai pris des photos du rendu de smartctl, je les poste après ou je mets de liens vers un service d'hébergement si ça ne passe pas ici
j'ai 88go de fait (+/- 18% du disque)

geole · Le 11/09/2020, à 00:55

Il copie tous les secteurs de la partition.
Certains de ces secteurs contiennent tes données, d'autres sont inutilisés mais il ne peut pas le savoir.
n'oublie pas que tes données sont étalées sur la totalité de la partition ext4 et pas à son début.
Rien ne presse pour le smart, tu pourras le refaire à la fin de la copie.

pigrosol · Le 11/09/2020, à 00:56

re, voilà je l'ai ai mise sur mega le lien est:

https://mega.nz/folder/r4cQHCSA#kPU4QQ3a4Bh0SlORfVqNKg

normalement pas besoin de s'inscrire pour accéder aux photos, j'ai testé en navigation privée.
en espérant que les photos sont en qualité suffisantes, sinon j'en prendrais des nouvelles ou essayerais d'exporter le contenu de la console.

p-s: j'en suis à 100go, par contre c'est marqué pass 1 (forwards) du à l'option -n si je me trompe pas;
du coup je pense que ça va durer plus longtemps.

en tout cas merci.

je reviens avec des news dès que j'en ai.

pigrosol · Le 11/09/2020, à 00:59

geole a écrit :

Il copie tous les secteurs de la partition.
Certains de ces secteurs contiennent tes données, d'autres sont inutilisés mais il ne peut pas le savoir.
n'oublie pas que tes données sont étalées sur la totalité de la partition ext4 et pas à son début.

ah dac je pensais que c'était le cas vu que linux ne fait pas de partitionnement

geole · Le 11/09/2020, à 01:05

J'ai regardé les photos. La partie matérielle du disque est saine.

Du coup, il faudra trouver une autre piste pour ce message d'erreur
540.034243] Buffer I/O error on dev sda2, logical block **** read

Dernière modification par geole (Le 11/09/2020, à 01:13)

pigrosol · Le 11/09/2020, à 01:14

geole a écrit :

Du coup, il faudra trouver une autre piste pour ce message d'erreur
540.034243] Buffer I/O error on dev sda2, logical block **** read

Je verrais si ça le fait encore avec le nouveau fsck.

je pensais que c'était du au clavier branché en usb qui est en azerty alors que le clavier intégré du portable est en qwerty (je le tiens de quand j'étudié au Québec) .. mais ça me fait bizarre que changer un clavier fasse planté le démarrage. je sais pas ce que tu en penses ...

anyway la prochaine installation, et mise en fr du système je la fait avec le clavier intégré sans rien connecté et je brancherais mes trucs une fois que l'install sera ok (je me sert de ce pc, qui est le plus que j'ai à dispo comme un pc de bureau avec un hub usb, clavier/souris usb)

p-s: ddrescue en est à 27%
pp-s : je viens de voir la modif de ton précédent msg qui parle de fsck ..

Dernière modification par pigrosol (Le 11/09/2020, à 01:15)

pigrosol · Le 11/09/2020, à 15:37

bon je ne comprends pas pourquoi mais hier ça a finit la récupération à 99,95%, il restait 225181kb de données a récupérer. et il m'a mis no space left, jsuis vert.

pourtant c'est bien un dde de 500go et la partition sda2 faisait 465go donc ça aurait fité ..

Les photos de la fin de l'opération de ddrescue sont dans le même dossier mega
https://mega.nz/folder/r4cQHCSA#kPU4QQ3a4Bh0SlORfVqNKg
j'y ai rajouté une photo du message qui arrive quand je tente de monter le dde sur lequel j'ia fait la récup.

# Mapfile. Created by GNU ddrescue version 1.23
# Command line: ddrescue -f -n -b512 /dev/sda2 /dev/sdc1 /home/ubuntu/log-recup/suivi
# Start time:   2020-09-10 21:40:22
# Current time: 2020-09-11 03:53:22
# Copying non-tried blocks... Pass 1 (forwards)
# current_pos  current_status  current_pass
0x7446D00000     ?               1
#      pos        size  status
0x00000000  0x0245C000  +
0x0245C000  0x00004000  *
0x02460000  0x004D0000  ?
0x02930000  0x14F610000  +
0x151F40000  0x00010000  *
0x151F50000  0x004D0000  ?
0x152420000  0x00097000  +
0x1524B7000  0x00009000  *
0x1524C0000  0x004D0000  ?
0x152990000  0x302F6D7000  +
0x3182067000  0x00009000  *
0x3182070000  0x004D0000  ?
0x3182540000  0x21AC1000  +
0x31A4001000  0x0000F000  *
0x31A4010000  0x004D0000  ?
0x31A44E0000  0xDBB99000  +
0x3280079000  0x00007000  *
0x3280080000  0x004D0000  ?
0x3280550000  0x01AEE000  +
0x328203E000  0x00002000  *
0x3282040000  0x004D0000  ?
0x3282510000  0x2585F02000  +
0x5808412000  0x0000E000  *
0x5808420000  0x004D0000  ?
0x58088F0000  0x34C37000  +
0x583D527000  0x00009000  *
0x583D530000  0x004D0000  ?
0x583DA00000  0x016A1000  +
0x583F0A1000  0x0000F000  *
0x583F0B0000  0x004D0000  ?
0x583F580000  0x42CE2000  +
0x5882262000  0x0000E000  *
0x5882270000  0x004D0000  ?
0x5882740000  0xFF911000  +
0x5982051000  0x0000F000  *
0x5982060000  0x004D0000  ?
0x5982530000  0x1AC47D0000  +
0x7446D00000  0x09D00000  ?

qu'est-ce que je fais là du coup ?

Dernière modification par pigrosol (Le 11/09/2020, à 15:42)

pigrosol · Le 11/09/2020, à 16:00

j'ai fait un dmesg sur le ddi comme le demandait yannou
voici le retour entier de la commande :

[    0.000000] microcode: microcode updated early to revision 0x28, date = 2019-11-12
[    0.000000] Linux version 5.4.0-42-generic (buildd@lgw01-amd64-038) (gcc version 9.3.0 (Ubuntu 9.3.0-10ubuntu2)) #46-Ubuntu SMP Fri Jul 10 00:24:02 UTC 2020 (Ubuntu 5.4.0-42.46-generic 5.4.44)
[    0.000000] Command line: BOOT_IMAGE=/casper/vmlinuz persistent file=/cdrom/preseed/ubuntu.seed quiet splash ---
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000]   zhaoxin   Shanghai  
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000008bfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000008c000-0x00000000000bffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000d022cfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d022d000-0x00000000d042efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000d042f000-0x00000000da57bfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000da57c000-0x00000000dce7efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dce7f000-0x00000000dcf7efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000dcf7f000-0x00000000dcffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000dcfff000-0x00000000dcffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dd000000-0x00000000df9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021f5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0xd141f018-0xd142f057] usable ==> usable
[    0.000000] e820: update [mem 0xd141f018-0xd142f057] usable ==> usable
[    0.000000] e820: update [mem 0xd140e018-0xd141e657] usable ==> usable
[    0.000000] e820: update [mem 0xd140e018-0xd141e657] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000008bfff] usable
[    0.000000] reserve setup_data: [mem 0x000000000008c000-0x00000000000bffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000d022cfff] usable
[    0.000000] reserve setup_data: [mem 0x00000000d022d000-0x00000000d042efff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000d042f000-0x00000000d140e017] usable
[    0.000000] reserve setup_data: [mem 0x00000000d140e018-0x00000000d141e657] usable
[    0.000000] reserve setup_data: [mem 0x00000000d141e658-0x00000000d141f017] usable
[    0.000000] reserve setup_data: [mem 0x00000000d141f018-0x00000000d142f057] usable
[    0.000000] reserve setup_data: [mem 0x00000000d142f058-0x00000000da57bfff] usable
[    0.000000] reserve setup_data: [mem 0x00000000da57c000-0x00000000dce7efff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000dce7f000-0x00000000dcf7efff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x00000000dcf7f000-0x00000000dcffefff] ACPI data
[    0.000000] reserve setup_data: [mem 0x00000000dcfff000-0x00000000dcffffff] usable
[    0.000000] reserve setup_data: [mem 0x00000000dd000000-0x00000000df9fffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000021f5fffff] usable
[    0.000000] efi: EFI v2.31 by Lenovo
[    0.000000] efi:  ACPI=0xdcffe000  ACPI 2.0=0xdcffe014  SMBIOS=0xdce7e000  ESRT=0xda954000 
[    0.000000] efi: [Firmware Bug]: Invalid EFI memory map entries:
[    0.000000] efi: mem46: [Reserved           |   |  |  |  |  |  |  |   |  |  |  |  ] range=[0x0000000000000000-0x0000000000000000] (invalid)
[    0.000000] efi: mem47: [Reserved           |   |  |  |  |  |  |  |   |  |  |  |  ] range=[0x0000000000000000-0x0000000000000000] (invalid)
[    0.000000] efi: mem48: [Reserved           |   |  |  |  |  |  |  |   |  |  |  |  ] range=[0x0000000000000000-0x0000000000000000] (invalid)
[    0.000000] efi: mem49: [Reserved           |   |  |  |  |  |  |  |   |  |  |  |  ] range=[0x0000000000000000-0x0000000000000000] (invalid)
[    0.000000] efi: mem50: [Reserved           |   |  |  |  |  |  |  |   |  |  |  |  ] range=[0x0000000000000000-0x0000000000000000] (invalid)
[    0.000000] efi: mem51: [Reserved           |   |  |  |  |  |  |  |   |  |  |  |  ] range=[0x0000000000000000-0x0000000000000000] (invalid)
[    0.000000] efi: mem52: [Reserved           |   |  |  |  |  |  |  |   |  |  |  |  ] range=[0x0000000000000000-0x0000000000000000] (invalid)
[    0.000000] efi: Removing 7 invalid memory map entries.
[    0.000000] secureboot: Secure boot disabled
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: LENOVO 20AUS07K00/20AUS07K00, BIOS J4ET88WW(1.88) 07/20/2017
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2494.326 MHz processor
[    0.001855] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.001857] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.001863] last_pfn = 0x21f600 max_arch_pfn = 0x400000000
[    0.001867] MTRR default type: write-back
[    0.001868] MTRR fixed ranges enabled:
[    0.001869]   00000-9FFFF write-back
[    0.001870]   A0000-BFFFF uncachable
[    0.001870]   C0000-FFFFF write-protect
[    0.001871] MTRR variable ranges enabled:
[    0.001872]   0 base 00E0000000 mask 7FE0000000 uncachable
[    0.001873]   1 base 00DE000000 mask 7FFE000000 uncachable
[    0.001874]   2 base 00DD000000 mask 7FFF000000 uncachable
[    0.001874]   3 disabled
[    0.001875]   4 disabled
[    0.001875]   5 disabled
[    0.001876]   6 disabled
[    0.001876]   7 disabled
[    0.001877]   8 disabled
[    0.001877]   9 disabled
[    0.002204] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.002338] last_pfn = 0xdd000 max_arch_pfn = 0x400000000
[    0.010538] esrt: Reserving ESRT space from 0x00000000da954000 to 0x00000000da954060.
[    0.010544] check: Scanning 1 areas for low memory corruption
[    0.010548] Using GB pages for direct mapping
[    0.010550] BRK [0x102001000, 0x102001fff] PGTABLE
[    0.010552] BRK [0x102002000, 0x102002fff] PGTABLE
[    0.010553] BRK [0x102003000, 0x102003fff] PGTABLE
[    0.010595] BRK [0x102004000, 0x102004fff] PGTABLE
[    0.010597] BRK [0x102005000, 0x102005fff] PGTABLE
[    0.010794] BRK [0x102006000, 0x102006fff] PGTABLE
[    0.010841] BRK [0x102007000, 0x102007fff] PGTABLE
[    0.010921] BRK [0x102008000, 0x102008fff] PGTABLE
[    0.011013] BRK [0x102009000, 0x102009fff] PGTABLE
[    0.011072] BRK [0x10200a000, 0x10200afff] PGTABLE
[    0.011141] secureboot: Secure boot disabled
[    0.011142] RAMDISK: [mem 0x3a960000-0x3fffdfff]
[    0.011153] ACPI: Early table checksum verification disabled
[    0.011156] ACPI: RSDP 0x00000000DCFFE014 000024 (v02 LENOVO)
[    0.011160] ACPI: XSDT 0x00000000DCFFE170 0000CC (v01 LENOVO TP-J4    00001880 PTEC 00000002)
[    0.011165] ACPI: FACP 0x00000000DCFFB000 00010C (v05 LENOVO TP-J4    00001880 PTEC 00000002)
[    0.011170] ACPI: DSDT 0x00000000DCFE7000 00F7C6 (v01 LENOVO TP-J4    00001880 INTL 20120711)
[    0.011173] ACPI: FACS 0x00000000DCF6A000 000040
[    0.011175] ACPI: ASF! 0x00000000DCFFD000 0000A5 (v32 LENOVO TP-J4    00001880 PTEC 00000002)
[    0.011178] ACPI: HPET 0x00000000DCFFA000 000038 (v01 LENOVO TP-J4    00001880 PTEC 00000002)
[    0.011180] ACPI: LPIT 0x00000000DCFF9000 000094 (v01 LENOVO TP-J4    00001880 PTEC 00000002)
[    0.011182] ACPI: APIC 0x00000000DCFF8000 000098 (v01 LENOVO TP-J4    00001880 PTEC 00000002)
[    0.011185] ACPI: MCFG 0x00000000DCFF7000 00003C (v01 LENOVO TP-J4    00001880 PTEC 00000002)
[    0.011187] ACPI: SSDT 0x00000000DCFE6000 000200 (v01 LENOVO sensrhub 00000000 INTL 20120711)
[    0.011190] ACPI: SSDT 0x00000000DCFE5000 00019A (v01 LENOVO Sata0Ide 00001000 INTL 20120711)
[    0.011192] ACPI: SSDT 0x00000000DCFE4000 000180 (v01 LENOVO Sata1Ide 00001000 INTL 20120711)
[    0.011195] ACPI: SSDT 0x00000000DCFE3000 000539 (v01 LENOVO Cpu0Ist  00003000 INTL 20120711)
[    0.011198] ACPI: SSDT 0x00000000DCFE2000 000AD8 (v01 LENOVO CpuPm    00003000 INTL 20120711)
[    0.011200] ACPI: SSDT 0x00000000DCFDE000 00358E (v01 LENOVO SaSsdt   00003000 INTL 20120711)
[    0.011203] ACPI: SSDT 0x00000000DCFDD000 00036F (v01 LENOVO CppcTabl 00001000 INTL 20120711)
[    0.011205] ACPI: PCCT 0x00000000DCFDC000 00006E (v05 LENOVO TP-J4    00001880 PTEC 00000002)
[    0.011208] ACPI: SSDT 0x00000000DCFDB000 000AC4 (v01 LENOVO Cpc_Tabl 00001000 INTL 20120711)
[    0.011210] ACPI: UEFI 0x00000000DCFDA000 000042 (v01 LENOVO TP-J4    00001880 PTEC 00000002)
[    0.011213] ACPI: MSDM 0x00000000DCF62000 000055 (v03 LENOVO TP-J4    00001880 PTEC 00000002)
[    0.011215] ACPI: BATB 0x00000000DCFD9000 000046 (v01 LENOVO TP-J4    00001880 PTEC 00000002)
[    0.011218] ACPI: FPDT 0x00000000DCFD8000 000064 (v01 LENOVO TP-J4    00001880 PTEC 00000002)
[    0.011220] ACPI: UEFI 0x00000000DCFD7000 0002F6 (v01 LENOVO TP-J4    00001880 PTEC 00000002)
[    0.011223] ACPI: DBGP 0x00000000DCFD6000 000034 (v01 LENOVO TP-J4    00001880 PTEC 00000002)
[    0.011230] ACPI: Local APIC address 0xfee00000
[    0.011321] No NUMA configuration found
[    0.011322] Faking a node at [mem 0x0000000000000000-0x000000021f5fffff]
[    0.011332] NODE_DATA(0) allocated [mem 0x21f5d5000-0x21f5fffff]
[    0.011532] Zone ranges:
[    0.011532]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.011534]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.011535]   Normal   [mem 0x0000000100000000-0x000000021f5fffff]
[    0.011535]   Device   empty
[    0.011536] Movable zone start for each node
[    0.011539] Early memory node ranges
[    0.011540]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.011541]   node   0: [mem 0x0000000000059000-0x000000000008bfff]
[    0.011542]   node   0: [mem 0x0000000000100000-0x00000000d022cfff]
[    0.011543]   node   0: [mem 0x00000000d042f000-0x00000000da57bfff]
[    0.011543]   node   0: [mem 0x00000000dcfff000-0x00000000dcffffff]
[    0.011544]   node   0: [mem 0x0000000100000000-0x000000021f5fffff]
[    0.011790] Zeroed struct page in unavailable ranges: 26363 pages
[    0.011791] Initmem setup node 0 [mem 0x0000000000001000-0x000000021f5fffff]
[    0.011793] On node 0 totalpages: 2070789
[    0.011794]   DMA zone: 64 pages used for memmap
[    0.011794]   DMA zone: 71 pages reserved
[    0.011795]   DMA zone: 3978 pages, LIFO batch:0
[    0.011844]   DMA32 zone: 13902 pages used for memmap
[    0.011844]   DMA32 zone: 889723 pages, LIFO batch:63
[    0.022619]   Normal zone: 18392 pages used for memmap
[    0.022620]   Normal zone: 1177088 pages, LIFO batch:63
[    0.035630] Reserving Intel graphics memory at [mem 0xdda00000-0xdf9fffff]
[    0.035750] ACPI: PM-Timer IO Port: 0x1808
[    0.035752] ACPI: Local APIC address 0xfee00000
[    0.035759] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.035760] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.035770] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.035772] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.035773] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.035775] ACPI: IRQ0 used by override.
[    0.035776] ACPI: IRQ9 used by override.
[    0.035777] Using ACPI (MADT) for SMP configuration information
[    0.035778] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.035782] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.035798] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.035800] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.035801] PM: Registered nosave memory: [mem 0x0008c000-0x000bffff]
[    0.035801] PM: Registered nosave memory: [mem 0x000c0000-0x000dffff]
[    0.035802] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.035803] PM: Registered nosave memory: [mem 0xd022d000-0xd042efff]
[    0.035805] PM: Registered nosave memory: [mem 0xd140e000-0xd140efff]
[    0.035806] PM: Registered nosave memory: [mem 0xd141e000-0xd141efff]
[    0.035807] PM: Registered nosave memory: [mem 0xd141f000-0xd141ffff]
[    0.035808] PM: Registered nosave memory: [mem 0xd142f000-0xd142ffff]
[    0.035809] PM: Registered nosave memory: [mem 0xda57c000-0xdce7efff]
[    0.035810] PM: Registered nosave memory: [mem 0xdce7f000-0xdcf7efff]
[    0.035810] PM: Registered nosave memory: [mem 0xdcf7f000-0xdcffefff]
[    0.035812] PM: Registered nosave memory: [mem 0xdd000000-0xdf9fffff]
[    0.035812] PM: Registered nosave memory: [mem 0xdfa00000-0xf80f7fff]
[    0.035813] PM: Registered nosave memory: [mem 0xf80f8000-0xf80f8fff]
[    0.035813] PM: Registered nosave memory: [mem 0xf80f9000-0xfed1bfff]
[    0.035814] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.035814] PM: Registered nosave memory: [mem 0xfed20000-0xffffffff]
[    0.035816] [mem 0xdfa00000-0xf80f7fff] available for PCI devices
[    0.035817] Booting paravirtualized kernel on bare hardware
[    0.035820] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.035826] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.036080] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144
[    0.036086] pcpu-alloc: s184320 r8192 d28672 u262144 alloc=1*2097152
[    0.036087] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.036114] Built 1 zonelists, mobility grouping on.  Total pages: 2038360
[    0.036115] Policy zone: Normal
[    0.036117] Kernel command line: BOOT_IMAGE=/casper/vmlinuz persistent file=/cdrom/preseed/ubuntu.seed quiet splash ---
[    0.036645] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.036852] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.036924] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.040332] Calgary: detecting Calgary via BIOS EBDA area
[    0.040334] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.061399] Memory: 7877092K/8283156K available (14339K kernel code, 2397K rwdata, 4952K rodata, 2712K init, 4992K bss, 406064K reserved, 0K cma-reserved)
[    0.061406] random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0
[    0.061549] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.061562] Kernel/User page tables isolation: enabled
[    0.061576] ftrace: allocating 44488 entries in 174 pages
[    0.079908] rcu: Hierarchical RCU implementation.
[    0.079910] rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[    0.079911] 	Tasks RCU enabled.
[    0.079911] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.079912] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.082876] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16
[    0.083185] random: crng done (trusting CPU's manufacturer)
[    0.083210] Console: colour dummy device 80x25
[    0.083215] printk: console [tty0] enabled
[    0.083233] ACPI: Core revision 20190816
[    0.083391] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.083404] APIC: Switch to symmetric I/O mode setup
[    0.083792] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.103409] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x23f449e4925, max_idle_ns: 440795297651 ns
[    0.103413] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.65 BogoMIPS (lpj=9977304)
[    0.103416] pid_max: default: 32768 minimum: 301
[    0.111446] LSM: Security Framework initializing
[    0.111459] Yama: becoming mindful.
[    0.111499] AppArmor: AppArmor initialized
[    0.111543] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.111556] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.111573] *** VALIDATE tmpfs ***
[    0.111712] *** VALIDATE proc ***
[    0.111765] *** VALIDATE cgroup1 ***
[    0.111766] *** VALIDATE cgroup2 ***
[    0.111820] mce: CPU0: Thermal monitoring enabled (TM1)
[    0.111831] process: using mwait in idle threads
[    0.111833] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[    0.111834] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[    0.111837] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.111839] Spectre V2 : Mitigation: Full generic retpoline
[    0.111839] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.111840] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.111841] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.111842] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[    0.111843] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.111846] SRBDS: Mitigation: Microcode
[    0.111847] MDS: Mitigation: Clear CPU buffers
[    0.112023] Freeing SMP alternatives memory: 40K
[    0.114089] smpboot: CPU0: Intel(R) Core(TM) i5-4200M CPU @ 2.50GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[    0.114214] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.114230] ... version:                3
[    0.114231] ... bit width:              48
[    0.114231] ... generic registers:      4
[    0.114232] ... value mask:             0000ffffffffffff
[    0.114233] ... max period:             00007fffffffffff
[    0.114233] ... fixed-purpose events:   3
[    0.114234] ... event mask:             000000070000000f
[    0.114267] rcu: Hierarchical SRCU implementation.
[    0.115344] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.115411] smp: Bringing up secondary CPUs ...
[    0.115411] x86: Booting SMP configuration:
[    0.115411] .... node  #0, CPUs:      #1
[    0.115411] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[    0.115411]  #2 #3
[    0.116540] smp: Brought up 1 node, 4 CPUs
[    0.116540] smpboot: Max logical packages: 2
[    0.116540] smpboot: Total of 4 processors activated (19954.60 BogoMIPS)
[    0.116842] devtmpfs: initialized
[    0.116842] x86/mm: Memory block size: 128MB
[    0.119594] PM: Registering ACPI NVS region [mem 0xdce7f000-0xdcf7efff] (1048576 bytes)
[    0.119594] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.119594] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.119594] pinctrl core: initialized pinctrl subsystem
[    0.119610] PM: RTC time: 13:10:01, date: 2020-09-11
[    0.119717] NET: Registered protocol family 16
[    0.119795] audit: initializing netlink subsys (disabled)
[    0.119805] audit: type=2000 audit(1599829801.036:1): state=initialized audit_enabled=0 res=1
[    0.119805] EISA bus registered
[    0.119805] cpuidle: using governor ladder
[    0.119805] cpuidle: using governor menu
[    0.119805] Detected 1 PCC Subspaces
[    0.119805] Registering PCC driver as Mailbox controller
[    0.119805] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.119805] ACPI: bus type PCI registered
[    0.119805] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.119805] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.119805] PCI: not using MMCONFIG
[    0.119805] PCI: Using configuration type 1 for base access
[    0.119805] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.119805] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.120480] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.120480] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.123496] ACPI: Added _OSI(Module Device)
[    0.123497] ACPI: Added _OSI(Processor Device)
[    0.123498] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.123498] ACPI: Added _OSI(Processor Aggregator Device)
[    0.123499] ACPI: Added _OSI(Linux-Dell-Video)
[    0.123500] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.123501] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.142516] ACPI: 9 ACPI AML tables successfully acquired and loaded
[    0.143823] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.145329] ACPI: Dynamic OEM Table Load:
[    0.145336] ACPI: SSDT 0xFFFF8B3815850400 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20120711)
[    0.146596] ACPI: Dynamic OEM Table Load:
[    0.146602] ACPI: SSDT 0xFFFF8B38163FD000 0005AA (v01 PmRef  ApIst    00003000 INTL 20120711)
[    0.147937] ACPI: Dynamic OEM Table Load:
[    0.147942] ACPI: SSDT 0xFFFF8B3815B11200 000119 (v01 PmRef  ApCst    00003000 INTL 20120711)
[    0.149817] ACPI: EC: EC started
[    0.149817] ACPI: EC: interrupt blocked
[    0.584829] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as first EC
[    0.584831] ACPI: \_SB_.PCI0.LPCB.H_EC: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.584832] ACPI: \_SB_.PCI0.LPCB.H_EC: Boot DSDT EC used to handle transactions
[    0.584832] ACPI: Interpreter enabled
[    0.584869] ACPI: (supports S0 S3 S4 S5)
[    0.584869] ACPI: Using IOAPIC for interrupt routing
[    0.584904] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.585522] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[    0.585531] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.585931] ACPI: Enabled 10 GPEs in block 00 to 3F
[    0.587403] ACPI: Power Resource [PUBS] (off)
[    0.599458] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.599463] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.599679] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.600578] PCI host bridge to bus 0000:00
[    0.600580] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.600581] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.600582] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.600583] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window]
[    0.600585] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.600594] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
[    0.600810] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
[    0.600821] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
[    0.600826] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.600830] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
[    0.600841] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.601038] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[    0.601047] pci 0000:00:03.0: reg 0x10: [mem 0xf0530000-0xf0533fff 64bit]
[    0.601277] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[    0.601298] pci 0000:00:14.0: reg 0x10: [mem 0xf0520000-0xf052ffff 64bit]
[    0.601355] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.601554] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[    0.601575] pci 0000:00:16.0: reg 0x10: [mem 0xf0539000-0xf053900f 64bit]
[    0.601635] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.601829] pci 0000:00:19.0: [8086:153b] type 00 class 0x020000
[    0.601847] pci 0000:00:19.0: reg 0x10: [mem 0xf0500000-0xf051ffff]
[    0.601854] pci 0000:00:19.0: reg 0x14: [mem 0xf053e000-0xf053efff]
[    0.601862] pci 0000:00:19.0: reg 0x18: [io  0x3060-0x307f]
[    0.601917] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.602117] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[    0.602137] pci 0000:00:1a.0: reg 0x10: [mem 0xf053d000-0xf053d3ff]
[    0.602216] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.602421] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[    0.602440] pci 0000:00:1b.0: reg 0x10: [mem 0xf0534000-0xf0537fff 64bit]
[    0.602506] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.602705] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[    0.602787] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.603056] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400
[    0.603134] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.603406] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[    0.603428] pci 0000:00:1d.0: reg 0x10: [mem 0xf053c000-0xf053c3ff]
[    0.603513] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.603721] pci 0000:00:1f.0: [8086:8c49] type 00 class 0x060100
[    0.604011] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[    0.604028] pci 0000:00:1f.3: reg 0x10: [mem 0xf0538000-0xf05380ff 64bit]
[    0.604047] pci 0000:00:1f.3: reg 0x20: [io  0xefa0-0xefbf]
[    0.604253] pci 0000:00:1f.5: [8086:8c09] type 00 class 0x010185
[    0.604267] pci 0000:00:1f.5: reg 0x10: [io  0x30a8-0x30af]
[    0.604274] pci 0000:00:1f.5: reg 0x14: [io  0x30b4-0x30b7]
[    0.604280] pci 0000:00:1f.5: reg 0x18: [io  0x30a0-0x30a7]
[    0.604287] pci 0000:00:1f.5: reg 0x1c: [io  0x30b0-0x30b3]
[    0.604294] pci 0000:00:1f.5: reg 0x20: [io  0x3090-0x309f]
[    0.604300] pci 0000:00:1f.5: reg 0x24: [io  0x3080-0x308f]
[    0.604565] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.604679] pci 0000:02:00.0: [8086:08b2] type 00 class 0x028000
[    0.604766] pci 0000:02:00.0: reg 0x10: [mem 0xf0400000-0xf0401fff 64bit]
[    0.605028] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.605242] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.605247] pci 0000:00:1c.1:   bridge window [mem 0xf0400000-0xf04fffff]
[    0.606502] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.606583] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.606663] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.606741] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.606821] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.606901] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.606979] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.607059] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.607521] ACPI: EC: interrupt unblocked
[    0.607532] ACPI: EC: event unblocked
[    0.607538] ACPI: \_SB_.PCI0.LPCB.H_EC: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.607539] ACPI: \_SB_.PCI0.LPCB.H_EC: Boot DSDT EC used to handle transactions and events
[    0.607629] iommu: Default domain type: Translated 
[    0.607629] SCSI subsystem initialized
[    0.607629] libata version 3.00 loaded.
[    0.607629] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.607629] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.607629] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.607629] vgaarb: loaded
[    0.607629] ACPI: bus type USB registered
[    0.607629] usbcore: registered new interface driver usbfs
[    0.607629] usbcore: registered new interface driver hub
[    0.607629] usbcore: registered new device driver usb
[    0.607629] pps_core: LinuxPPS API ver. 1 registered
[    0.607629] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.607629] PTP clock support registered
[    0.607629] EDAC MC: Ver: 3.0.0
[    0.607629] Registered efivars operations
[    0.607629] PCI: Using ACPI for IRQ routing
[    0.612533] PCI: pci_cache_line_size set to 64 bytes
[    0.612590] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.612591] e820: reserve RAM buffer [mem 0x0008c000-0x0008ffff]
[    0.612591] e820: reserve RAM buffer [mem 0xd022d000-0xd3ffffff]
[    0.612592] e820: reserve RAM buffer [mem 0xd140e018-0xd3ffffff]
[    0.612593] e820: reserve RAM buffer [mem 0xd141f018-0xd3ffffff]
[    0.612594] e820: reserve RAM buffer [mem 0xda57c000-0xdbffffff]
[    0.612594] e820: reserve RAM buffer [mem 0xdd000000-0xdfffffff]
[    0.612595] e820: reserve RAM buffer [mem 0x21f600000-0x21fffffff]
[    0.612695] NetLabel: Initializing
[    0.612696] NetLabel:  domain hash size = 128
[    0.612696] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.612712] NetLabel:  unlabeled traffic allowed by default
[    0.612727] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.612727] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.614063] clocksource: Switched to clocksource tsc-early
[    0.623624] *** VALIDATE bpf ***
[    0.623700] VFS: Disk quotas dquot_6.6.0
[    0.623719] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.623743] *** VALIDATE ramfs ***
[    0.623747] *** VALIDATE hugetlbfs ***
[    0.623832] AppArmor: AppArmor Filesystem Enabled
[    0.623860] pnp: PnP ACPI init
[    0.624066] system 00:00: [io  0x06a4] has been reserved
[    0.624067] system 00:00: [io  0x06a0] has been reserved
[    0.624072] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.624202] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.624204] system 00:01: [io  0xffff] has been reserved
[    0.624205] system 00:01: [io  0xffff] has been reserved
[    0.624206] system 00:01: [io  0xffff] has been reserved
[    0.624207] system 00:01: [io  0x0800-0x08fe] has been reserved
[    0.624208] system 00:01: [io  0x0900-0x09fe] has been reserved
[    0.624209] system 00:01: [io  0x0a00-0x0afe] has been reserved
[    0.624210] system 00:01: [io  0x0b00-0x0bfe] has been reserved
[    0.624212] system 00:01: [io  0x1800-0x18fe] has been reserved
[    0.624213] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.624215] system 00:01: [mem 0xfe800000-0xfe80ffff] has been reserved
[    0.624218] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.624240] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.624293] system 00:03: [io  0x1854-0x1857] has been reserved
[    0.624296] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.624314] pnp 00:04: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active)
[    0.624331] pnp 00:05: Plug and Play ACPI device, IDs LEN2004 PNP0f13 (active)
[    0.624505] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.624506] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.624508] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.624510] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.624511] system 00:06: [mem 0xf8000000-0xfbffffff] could not be reserved
[    0.624512] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.624513] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.624514] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.624515] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[    0.624516] system 00:06: [mem 0xfee00000-0xfeefffff] has been reserved
[    0.624518] system 00:06: [mem 0xffffffff-0x100000ffe] could not be reserved
[    0.624521] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.625325] pnp: PnP ACPI: found 7 devices
[    0.626433] thermal_sys: Registered thermal governor 'fair_share'
[    0.626434] thermal_sys: Registered thermal governor 'bang_bang'
[    0.626434] thermal_sys: Registered thermal governor 'step_wise'
[    0.626435] thermal_sys: Registered thermal governor 'user_space'
[    0.626435] thermal_sys: Registered thermal governor 'power_allocator'
[    0.630976] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.631011] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.631026] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.631031] pci 0000:00:1c.1:   bridge window [mem 0xf0400000-0xf04fffff]
[    0.631039] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.631040] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.631041] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.631042] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff window]
[    0.631043] pci_bus 0000:02: resource 1 [mem 0xf0400000-0xf04fffff]
[    0.631176] NET: Registered protocol family 2
[    0.631375] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.631428] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.631559] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.631670] TCP: Hash tables configured (established 65536 bind 65536)
[    0.631707] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.631730] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.631782] NET: Registered protocol family 1
[    0.631788] NET: Registered protocol family 44
[    0.631798] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.631897] pci 0000:00:14.0: can't derive routing for PCI INT A
[    0.631898] pci 0000:00:14.0: PCI INT A: not connected
[    0.632298] PCI: CLS 64 bytes, default 64
[    0.632335] Trying to unpack rootfs image as initramfs...
[    0.844807] Initramfs unpacking failed: Decoding failed
[    0.844816] fbcon: Taking over console
[    0.853642] Freeing initrd memory: 88696K
[    0.853750] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.853752] software IO TLB: mapped [mem 0xca403000-0xce403000] (64MB)
[    0.853954] check: Scanning for low memory corruption every 60 seconds
[    0.855906] Initialise system trusted keyrings
[    0.855915] Key type blacklist registered
[    0.855946] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    0.857175] zbud: loaded
[    0.857518] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.857662] fuse: init (API version 7.31)
[    0.857677] *** VALIDATE fuse ***
[    0.857678] *** VALIDATE fuse ***
[    0.857761] Platform Keyring initialized
[    0.863210] Key type asymmetric registered
[    0.863211] Asymmetric key parser 'x509' registered
[    0.863218] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    0.863259] io scheduler mq-deadline registered
[    0.863815] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.863869] efifb: probing for efifb
[    0.863880] efifb: No BGRT, not showing boot graphics
[    0.863881] efifb: framebuffer at 0xe0000000, using 1200k, total 1200k
[    0.863882] efifb: mode is 640x480x32, linelength=2560, pages=1
[    0.863882] efifb: scrolling: redraw
[    0.863884] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.863962] Console: switching to colour frame buffer device 80x30
[    0.864637] fb0: EFI VGA frame buffer device
[    0.864644] intel_idle: MWAIT substates: 0x42120
[    0.864645] intel_idle: v0.4.1 model 0x3C
[    0.864830] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.865006] ACPI: AC Adapter [ADP1] (on-line)
[    0.865071] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.865103] ACPI: Lid Switch [LID0]
[    0.865130] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    0.865151] ACPI: Sleep Button [SLPB]
[    0.865178] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.865195] ACPI: Power Button [PWRF]
[    0.866075] thermal LNXTHERM:00: registered as thermal_zone0
[    0.866076] ACPI: Thermal Zone [TZS0] (36 C)
[    0.866363] thermal LNXTHERM:01: registered as thermal_zone1
[    0.866364] ACPI: Thermal Zone [TZS1] (23 C)
[    0.866519] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.867327] battery: ACPI: Battery Slot [BAT0] (battery present)
[    0.868061] Linux agpgart interface v0.103
[    0.870161] loop: module loaded
[    0.870293] ata_piix 0000:00:1f.5: version 2.13
[    0.870407] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    1.028045] scsi host0: ata_piix
[    1.028272] scsi host1: ata_piix
[    1.028331] ata1: SATA max UDMA/133 cmd 0x30a8 ctl 0x30b4 bmdma 0x3090 irq 19
[    1.028334] ata2: SATA max UDMA/133 cmd 0x30a0 ctl 0x30b0 bmdma 0x3098 irq 19
[    1.028427] libphy: Fixed MDIO Bus: probed
[    1.028427] tun: Universal TUN/TAP device driver, 1.6
[    1.028485] PPP generic driver version 2.4.2
[    1.028546] VFIO - User Level meta-driver version: 0.3
[    1.028626] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.028630] ehci-pci: EHCI PCI platform driver
[    1.028778] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.028783] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.028799] ehci-pci 0000:00:1a.0: debug port 2
[    1.032687] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.032696] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf053d000
[    1.047483] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.047541] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    1.047542] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.047543] usb usb1: Product: EHCI Host Controller
[    1.047544] usb usb1: Manufacturer: Linux 5.4.0-42-generic ehci_hcd
[    1.047545] usb usb1: SerialNumber: 0000:00:1a.0
[    1.047744] hub 1-0:1.0: USB hub found
[    1.047750] hub 1-0:1.0: 3 ports detected
[    1.048064] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.048072] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.048086] ehci-pci 0000:00:1d.0: debug port 2
[    1.052006] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.052019] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf053c000
[    1.067482] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.067560] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    1.067561] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.067562] usb usb2: Product: EHCI Host Controller
[    1.067563] usb usb2: Manufacturer: Linux 5.4.0-42-generic ehci_hcd
[    1.067564] usb usb2: SerialNumber: 0000:00:1d.0
[    1.067761] hub 2-0:1.0: USB hub found
[    1.067766] hub 2-0:1.0: 3 ports detected
[    1.067945] ehci-platform: EHCI generic platform driver
[    1.067962] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.067966] ohci-pci: OHCI PCI platform driver
[    1.067975] ohci-platform: OHCI generic platform driver
[    1.067982] uhci_hcd: USB Universal Host Controller Interface driver
[    1.068104] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
[    1.068105] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
[    1.068131] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.068135] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    1.069204] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[    1.069209] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.069378] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    1.069379] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.069380] usb usb3: Product: xHCI Host Controller
[    1.069381] usb usb3: Manufacturer: Linux 5.4.0-42-generic xhci-hcd
[    1.069382] usb usb3: SerialNumber: 0000:00:14.0
[    1.069551] hub 3-0:1.0: USB hub found
[    1.069572] hub 3-0:1.0: 14 ports detected
[    1.070995] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.070997] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    1.071000] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    1.071044] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[    1.071045] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.071046] usb usb4: Product: xHCI Host Controller
[    1.071047] usb usb4: Manufacturer: Linux 5.4.0-42-generic xhci-hcd
[    1.071048] usb usb4: SerialNumber: 0000:00:14.0
[    1.071174] hub 4-0:1.0: USB hub found
[    1.071189] hub 4-0:1.0: 4 ports detected
[    1.071400] usb: port power management may be unreliable
[    1.071512] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    1.074455] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.074459] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.074691] mousedev: PS/2 mouse device common for all mice
[    1.074935] rtc_cmos 00:02: RTC can wake from S4
[    1.075096] rtc_cmos 00:02: registered as rtc0
[    1.075109] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.075114] i2c /dev entries driver
[    1.075152] device-mapper: uevent: version 1.0.3
[    1.075197] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
[    1.075212] platform eisa.0: Probing EISA bus 0
[    1.075214] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    1.075215] platform eisa.0: Cannot allocate resource for EISA slot 1
[    1.075216] platform eisa.0: Cannot allocate resource for EISA slot 2
[    1.075217] platform eisa.0: Cannot allocate resource for EISA slot 3
[    1.075217] platform eisa.0: Cannot allocate resource for EISA slot 4
[    1.075218] platform eisa.0: Cannot allocate resource for EISA slot 5
[    1.075219] platform eisa.0: Cannot allocate resource for EISA slot 6
[    1.075220] platform eisa.0: Cannot allocate resource for EISA slot 7
[    1.075221] platform eisa.0: Cannot allocate resource for EISA slot 8
[    1.075222] platform eisa.0: EISA: Detected 0 cards
[    1.075227] intel_pstate: Intel P-state driver initializing
[    1.075357] ledtrig-cpu: registered to indicate activity on CPUs
[    1.075361] EFI Variables Facility v0.08 2004-May-17
[    1.089237] drop_monitor: Initializing network drop monitor service
[    1.089374] NET: Registered protocol family 10
[    1.095885] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.096503] Segment Routing with IPv6
[    1.096524] NET: Registered protocol family 17
[    1.096559] Key type dns_resolver registered
[    1.096733] RAS: Correctable Errors collector initialized.
[    1.096763] microcode: sig=0x306c3, pf=0x10, revision=0x28
[    1.096795] microcode: Microcode Update Driver: v2.2.
[    1.096799] IPI shorthand broadcast: enabled
[    1.096808] sched_clock: Marking stable (1096456331, 336641)->(1123982282, -27189310)
[    1.096859] registered taskstats version 1
[    1.096867] Loading compiled-in X.509 certificates
[    1.098765] Loaded X.509 cert 'Build time autogenerated kernel key: 9e1aeb581c5145b0cc48f50fdf6e09edec23120f'
[    1.098793] zswap: loaded using pool lzo/zbud
[    1.098859] Key type ._fscrypt registered
[    1.098860] Key type .fscrypt registered
[    1.105517] Key type big_key registered
[    1.108582] Key type encrypted registered
[    1.108585] AppArmor: AppArmor sha1 policy hashing enabled
[    1.108982] integrity: Loading X.509 certificate: UEFI:db
[    1.109010] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[    1.109011] integrity: Loading X.509 certificate: UEFI:db
[    1.109028] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[    1.109028] integrity: Loading X.509 certificate: UEFI:db
[    1.109041] integrity: Loaded X.509 cert 'Lenovo Ltd.: ThinkPad Product CA 2012: 838b1f54c1550463f45f98700640f11069265949'
[    1.109042] integrity: Loading X.509 certificate: UEFI:db
[    1.110287] integrity: Loaded X.509 cert 'Lenovo(Beijing) Ltd.: TPEDL-PK: b04f2c5194961955fabd051092901f58b19f8292'
[    1.110287] integrity: Loading X.509 certificate: UEFI:db
[    1.110302] integrity: Loaded X.509 cert 'Lenovo UEFI CA 2014: 4b91a68732eaefdd2c8ffffc6b027ec3449e9c8f'
[    1.110971] ima: No TPM chip found, activating TPM-bypass!
[    1.110974] ima: Allocated hash algorithm: sha1
[    1.110979] ima: No architecture policies found
[    1.110987] evm: Initialising EVM extended attributes:
[    1.110987] evm: security.selinux
[    1.110987] evm: security.SMACK64
[    1.110988] evm: security.SMACK64EXEC
[    1.110988] evm: security.SMACK64TRANSMUTE
[    1.110988] evm: security.SMACK64MMAP
[    1.110989] evm: security.apparmor
[    1.110989] evm: security.ima
[    1.110989] evm: security.capability
[    1.110990] evm: HMAC attrs: 0x1
[    1.111402] PM:   Magic number: 4:838:179
[    1.111473] acpi device:0f: hash matches
[    1.111527] rtc_cmos 00:02: setting system clock to 2020-09-11T13:10:02 UTC (1599829802)
[    1.383475] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.403480] usb 3-2: new high-speed USB device number 2 using xhci_hcd
[    1.403482] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.503524] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.506255] ata1.00: ATA-8: HGST HTS725050A7E630, GH2ZB550, max UDMA/133
[    1.506257] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.509238] ata1.00: configured for UDMA/133
[    1.509434] scsi 0:0:0:0: Direct-Access     ATA      HGST HTS725050A7 B550 PQ: 0 ANSI: 5
[    1.509716] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.509796] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    1.509797] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.509810] sd 0:0:0:0: [sda] Write Protect is off
[    1.509811] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.509833] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.540189] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05
[    1.540191] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.540584] hub 1-1:1.0: USB hub found
[    1.540809] hub 1-1:1.0: 6 ports detected
[    1.551901] usb 3-2: New USB device found, idVendor=0781, idProduct=5567, bcdDevice= 1.27
[    1.551903] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.551904] usb 3-2: Product: Cruzer Blade
[    1.551905] usb 3-2: Manufacturer: SanDisk
[    1.551906] usb 3-2: SerialNumber: 4C530001231028118361
[    1.559897] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05
[    1.559899] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.560311] hub 2-1:1.0: USB hub found
[    1.560379] hub 2-1:1.0: 8 ports detected
[    1.679479] usb 3-11: new full-speed USB device number 3 using xhci_hcd
[    1.828715] usb 3-11: New USB device found, idVendor=8087, idProduct=07dc, bcdDevice= 0.01
[    1.828717] usb 3-11: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.838732]  sda: sda1 sda2
[    1.839147] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.875485] tsc: Refined TSC clocksource calibration: 2494.210 MHz
[    1.875493] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f3dc117a2, max_idle_ns: 440795222026 ns
[    1.875520] clocksource: Switched to clocksource tsc
[    2.071492] ata2: failed to resume link (SControl 0)
[    2.087721] ata2: SATA link down (SStatus 4 SControl 0)
[    2.088616] Freeing unused decrypted memory: 2040K
[    2.088971] Freeing unused kernel image memory: 2712K
[    2.089013] Write protecting the kernel read-only data: 22528k
[    2.089434] Freeing unused kernel image memory: 2008K
[    2.089646] Freeing unused kernel image memory: 1192K
[    2.097574] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    2.097575] x86/mm: Checking user space page tables
[    2.105239] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    2.105241] Run /init as init process
[    2.186929] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[    2.186998] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[    2.215940] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20190816/utaddress-204)
[    2.215946] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.215954] ACPI Warning: SystemIO range 0x0000000000000840-0x000000000000084F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPR) (20190816/utaddress-204)
[    2.215958] ACPI Warning: SystemIO range 0x0000000000000840-0x000000000000084F conflicts with OpRegion 0x0000000000000800-0x000000000000087F (\_SB.PCI0.LPCB.LPIO) (20190816/utaddress-204)
[    2.215962] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.215963] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x000000000000083F (\GPRL) (20190816/utaddress-204)
[    2.215966] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPR) (20190816/utaddress-204)
[    2.215969] ACPI Warning: SystemIO range 0x0000000000000830-0x000000000000083F conflicts with OpRegion 0x0000000000000800-0x000000000000087F (\_SB.PCI0.LPCB.LPIO) (20190816/utaddress-204)
[    2.215972] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.215973] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000083F (\GPRL) (20190816/utaddress-204)
[    2.215976] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x0000000000000BFF (\GPR) (20190816/utaddress-204)
[    2.215980] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000810-0x0000000000000813 (\IO_D) (20190816/utaddress-204)
[    2.215983] ACPI Warning: SystemIO range 0x0000000000000800-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000087F (\_SB.PCI0.LPCB.LPIO) (20190816/utaddress-204)
[    2.215986] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.215987] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    2.216393] usb-storage 3-2:1.0: USB Mass Storage device detected
[    2.216591] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    2.216591] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    2.216769] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    2.223900] cryptd: max_cpu_qlen set to 1000
[    2.227424] scsi host2: usb-storage 3-2:1.0
[    2.227450] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    2.227545] usbcore: registered new interface driver usb-storage
[    2.232523] usbcore: registered new interface driver uas
[    2.234084] AVX2 version of gcm_enc/dec engaged.
[    2.234085] AES CTR mode by8 optimization enabled
[    2.277025] checking generic (e0000000 12c000) vs hw (e0000000 10000000)
[    2.277026] fb0: switching to inteldrmfb from EFI VGA
[    2.277239] Console: switching to colour dummy device 80x25
[    2.277280] i915 0000:00:02.0: vgaarb: deactivate vga console
[    2.277359] [drm] ACPI BIOS requests an excessive sleep of 5000 ms, using 1500 ms instead
[    2.277989] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.277990] [drm] Driver supports precise vblank timestamp query.
[    2.278340] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.290271] [drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0
[    2.292287] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.292568] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[    2.294692] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[    2.307239] fbcon: i915drmfb (fb0) is primary device
[    2.366875] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:db:f7:02
[    2.366877] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    2.366934] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[    2.367796] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[    2.655147] psmouse serio1: synaptics: queried max coordinates: x [..5112], y [..3834]
[    2.683496] psmouse serio1: synaptics: queried min coordinates: x [1024..], y [1024..]
[    2.683501] psmouse serio1: synaptics: Trying to set up SMBus access
[    3.251972] scsi 2:0:0:0: Direct-Access     SanDisk  Cruzer Blade     1.27 PQ: 0 ANSI: 6
[    3.253275] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    3.253934] sd 2:0:0:0: [sdb] 15330304 512-byte logical blocks: (7.85 GB/7.31 GiB)
[    3.254589] sd 2:0:0:0: [sdb] Write Protect is off
[    3.254591] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00
[    3.254836] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    3.270363]  sdb: sdb1 sdb2
[    3.272193] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[    3.456927] Console: switching to colour frame buffer device 170x48
[    3.475874] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[    3.911139] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    6.879509] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[    6.879512] ata1.00: BMDMA stat 0x65
[    6.879514] ata1.00: failed command: READ DMA
[    6.879517] ata1.00: cmd c8/00:08:e0:2a:11/00:00:00:00:00/e0 tag 0 dma 4096 in
                        res 51/40:08:e0:2a:11/00:00:00:00:00/00 Emask 0x9 (media error)
[    6.879519] ata1.00: status: { DRDY ERR }
[    6.879520] ata1.00: error: { UNC }
[    6.887380] ata1.00: configured for UDMA/133
[    6.887393] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    6.887397] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] 
[    6.887399] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[    6.887402] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 11 2a e0 00 00 08 00
[    6.887404] blk_update_request: I/O error, dev sda, sector 1125088 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0
[    6.887429] ata1: EH complete
[    6.887437] EXT4-fs error (device sda2): __ext4_find_entry:1531: inode #2: comm sh: reading directory lblock 0
[    7.199052] EXT4-fs (sdb2): mounting ext3 file system using the ext4 subsystem
[    8.791532] EXT4-fs (sdb2): recovery complete
[    8.793384] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[   10.547829] overlayfs: "xino" feature enabled using 32 upper inode bits.
[   10.981800] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   11.217046] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   11.304575] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[  141.776805] systemd[1]: Inserted module 'autofs4'
[  141.831124] systemd[1]: systemd 245.4-4ubuntu3.2 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[  141.847569] systemd[1]: Detected architecture x86-64.
[  141.868304] systemd[1]: Set hostname to <ubuntu>.
[  142.007001] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
[  142.149484] systemd[1]: Created slice system-modprobe.slice.
[  142.149663] systemd[1]: Created slice User and Session Slice.
[  142.149719] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[  142.149888] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[  142.149918] systemd[1]: Reached target User and Group Name Lookups.
[  142.149928] systemd[1]: Reached target Remote File Systems.
[  142.149938] systemd[1]: Reached target Slices.
[  142.149948] systemd[1]: Reached target Swap.
[  142.150019] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[  142.150355] systemd[1]: Listening on LVM2 poll daemon socket.
[  142.150461] systemd[1]: Listening on Syslog Socket.
[  142.150507] systemd[1]: Listening on initctl Compatibility Named Pipe.
[  142.150783] systemd[1]: Listening on Journal Audit Socket.
[  142.150857] systemd[1]: Listening on Journal Socket (/dev/log).
[  142.150943] systemd[1]: Listening on Journal Socket.
[  142.151032] systemd[1]: Listening on udev Control Socket.
[  142.151092] systemd[1]: Listening on udev Kernel Socket.
[  142.151839] systemd[1]: Mounting Huge Pages File System...
[  142.152720] systemd[1]: Mounting POSIX Message Queue File System...
[  142.153980] systemd[1]: Mounting Kernel Debug File System...
[  142.155194] systemd[1]: Mounting Kernel Trace File System...
[  142.156878] systemd[1]: Starting Journal Service...
[  142.158058] systemd[1]: Starting Availability of block devices...
[  142.159319] systemd[1]: Starting Set the console keyboard layout...
[  142.161078] systemd[1]: Starting Create list of static device nodes for the current kernel...
[  142.162136] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[  142.162207] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
[  142.164847] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[  142.166496] systemd[1]: Starting Load Kernel Modules...
[  142.167680] systemd[1]: Starting Remount Root and Kernel File Systems...
[  142.168856] systemd[1]: Starting udev Coldplug all Devices...
[  142.171581] systemd[1]: Starting Uncomplicated firewall...
[  142.174235] systemd[1]: Mounted Huge Pages File System.
[  142.174970] systemd[1]: Mounted POSIX Message Queue File System.
[  142.175137] systemd[1]: Mounted Kernel Debug File System.
[  142.175299] systemd[1]: Mounted Kernel Trace File System.
[  142.181828] systemd[1]: Finished Availability of block devices.
[  142.182642] systemd[1]: Finished Create list of static device nodes for the current kernel.
[  142.184670] systemd[1]: Finished Uncomplicated firewall.
[  142.196572] systemd[1]: Finished Remount Root and Kernel File Systems.
[  142.206232] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[  142.206301] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[  142.208130] systemd[1]: Starting Create System Users...
[  142.211453] lp: driver loaded but no devices found
[  142.220847] ppdev: user-space parallel port driver
[  142.226769] systemd[1]: Finished Create System Users.
[  142.228179] systemd[1]: Starting Create Static Device Nodes in /dev...
[  142.229086] systemd[1]: Finished Load Kernel Modules.
[  142.230313] systemd[1]: Mounting FUSE Control File System...
[  142.231459] systemd[1]: Mounting Kernel Configuration File System...
[  142.232742] systemd[1]: Starting Apply Kernel Variables...
[  142.246193] systemd[1]: Finished Create Static Device Nodes in /dev.
[  142.246469] systemd[1]: Mounted FUSE Control File System.
[  142.247685] systemd[1]: Starting udev Kernel Device Manager...
[  142.253764] systemd[1]: Mounted Kernel Configuration File System.
[  142.265481] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
[  142.273905] systemd[1]: Finished Apply Kernel Variables.
[  142.291548] systemd[1]: Started Journal Service.
[  142.307551] systemd-journald[1260]: Received client request to flush runtime journal.
[  142.952705] EDAC ie31200: No ECC support
[  142.959695] mc: Linux media interface: v0.10
[  142.972922] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[  142.973211] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[  142.978155] videodev: Linux video capture interface: v2.00
[  143.005520] Non-volatile memory driver v1.3
[  143.020525] thinkpad_acpi: ThinkPad ACPI Extras v0.26
[  143.020527] thinkpad_acpi: http://ibm-acpi.sf.net/
[  143.020528] thinkpad_acpi: ThinkPad BIOS J4ET88WW(1.88), EC unknown
[  143.020528] thinkpad_acpi: Lenovo ThinkPad L540, model 20AUS07K00
[  143.030956] Intel(R) Wireless WiFi driver for Linux
[  143.030957] Copyright(c) 2003- 2015 Intel Corporation
[  143.040904] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[  143.040906] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[  143.042419] rmi4_smbus 0-002c: registering SMbus-connected sensor
[  143.055584] iwlwifi 0000:02:00.0: loaded firmware version 17.3216344376.0 op_mode iwlmvm
[  143.060714] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[  143.060716] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[  143.060719] RAPL PMU: hw unit of domain package 2^-14 Joules
[  143.060720] RAPL PMU: hw unit of domain dram 2^-14 Joules
[  143.060720] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[  143.063831] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[  143.065112] Bluetooth: Core ver 2.22
[  143.065132] NET: Registered protocol family 31
[  143.065133] Bluetooth: HCI device and connection manager initialized
[  143.065136] Bluetooth: HCI socket layer initialized
[  143.065139] Bluetooth: L2CAP socket layer initialized
[  143.065716] Bluetooth: SCO socket layer initialized
[  143.066429] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[  143.067558] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[  143.078021] thinkpad_acpi: battery 1 registered (start 0, stop 100)
[  143.078028] battery: new extension: ThinkPad Battery Extension
[  143.078094] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7
[  143.104721] rmi4_f01 rmi4-00.fn01: found RMI device, manufacturer: Synaptics, product: TM2722-001, fw id: 0
[  143.132337] iwlwifi 0000:02:00.0: Detected Intel(R) Wireless N 7260, REV=0x144
[  143.156153] input: Synaptics TM2722-001 as /devices/rmi4-00/input/input8
[  143.160757] iwlwifi 0000:02:00.0: base HW address: 5c:51:4f:c5:7a:83
[  143.161167] serio: RMI4 PS/2 pass-through port at rmi4-00.fn03
[  143.198656] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[  143.199839] usbcore: registered new interface driver btusb
[  143.215443] Bluetooth: hci0: read Intel version: 370710018002030d00
[  143.217791] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[  143.224920] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
[  143.224979] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
[  143.225034] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
[  143.225087] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
[  143.225142] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
[  143.230230] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3232: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[  143.230233] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[  143.230235] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=2 (0x16/0x15/0x0/0x0/0x0)
[  143.230236] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[  143.230237] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[  143.230238] snd_hda_codec_realtek hdaudioC1D0:      Dock Mic=0x19
[  143.230240] snd_hda_codec_realtek hdaudioC1D0:      Mic=0x1a
[  143.230241] snd_hda_codec_realtek hdaudioC1D0:      Internal Mic=0x12
[  143.278151] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[  143.278219] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
[  143.278269] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17
[  143.278326] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18
[  143.357751] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[  143.364487] intel_rapl_common: Found RAPL domain package
[  143.364489] intel_rapl_common: Found RAPL domain core
[  143.364490] intel_rapl_common: Found RAPL domain uncore
[  143.364491] intel_rapl_common: Found RAPL domain dram
[  143.383547] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[  143.410409] Bluetooth: hci0: unexpected event for opcode 0xfc2f
[  143.425408] Bluetooth: hci0: Intel firmware patch completed and activated
[  143.520999] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[  143.572198] input: TPPS/2 IBM TrackPoint as /devices/rmi4-00/rmi4-00.fn03/serio2/input/input9
[  145.914668] usb 3-11: USB disconnect, device number 3
[  146.039667] zlua: loading out-of-tree module taints kernel.
[  146.039670] zlua: module license 'MIT' taints kernel.
[  146.039671] Disabling lock debugging due to kernel taint
[  148.046083] ZFS: Loaded module v0.8.3-1ubuntu12.1, ZFS pool version 5000, ZFS filesystem version 5
[  148.190218] audit: type=1400 audit(1599829949.571:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.snap-store" pid=1627 comm="apparmor_parser"
[  148.214833] audit: type=1400 audit(1599829949.595:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.snap-store.snap-store" pid=1628 comm="apparmor_parser"
[  148.221561] audit: type=1400 audit(1599829949.603:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/snapd/8542/usr/lib/snapd/snap-confine" pid=1626 comm="apparmor_parser"
[  148.221565] audit: type=1400 audit(1599829949.603:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/snapd/8542/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1626 comm="apparmor_parser"
[  148.227277] audit: type=1400 audit(1599829949.607:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.snap-store.ubuntu-software" pid=1629 comm="apparmor_parser"
[  148.243097] audit: type=1400 audit(1599829949.623:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.snap-store.ubuntu-software-local-file" pid=1630 comm="apparmor_parser"
[  148.761368] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[  148.761372] Bluetooth: BNEP filters: protocol multicast
[  148.761379] Bluetooth: BNEP socket layer initialized
[  151.134645] wlp2s0: authenticate with 04:95:e6:b7:ac:01
[  151.139263] wlp2s0: send auth to 04:95:e6:b7:ac:01 (try 1/3)
[  151.148470] wlp2s0: authenticated
[  151.151518] wlp2s0: associate with 04:95:e6:b7:ac:01 (try 1/3)
[  151.160450] wlp2s0: RX AssocResp from 04:95:e6:b7:ac:01 (capab=0xc11 status=0 aid=6)
[  151.163226] wlp2s0: associated
[  151.186655] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[  155.176935] rfkill: input handler disabled
[  395.474129] usb 3-3: new low-speed USB device number 4 using xhci_hcd
[  395.625551] usb 3-3: New USB device found, idVendor=0461, idProduct=4d81, bcdDevice= 2.00
[  395.625557] usb 3-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[  395.625560] usb 3-3: Product: USB Optical Mouse
[  395.655349] hidraw: raw HID events driver (C) Jiri Kosina
[  395.660608] usbcore: registered new interface driver usbhid
[  395.660611] usbhid: USB HID core driver
[  395.674140] input: USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:0461:4D81.0001/input/input19
[  395.734319] hid-generic 0003:0461:4D81.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:14.0-3/input0
[ 1321.078587] usb 3-1: new high-speed USB device number 5 using xhci_hcd
[ 1321.228066] usb 3-1: New USB device found, idVendor=1058, idProduct=070a, bcdDevice=10.28
[ 1321.228073] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1321.228077] usb 3-1: Product: My Passport 070A
[ 1321.228080] usb 3-1: Manufacturer: Western Digital
[ 1321.228083] usb 3-1: SerialNumber: 575834304138393131363132
[ 1321.229788] usb-storage 3-1:1.0: USB Mass Storage device detected
[ 1321.230362] usb-storage 3-1:1.0: Quirks match for vid 1058 pid 070a: 200000
[ 1321.230433] scsi host3: usb-storage 3-1:1.0
[ 1322.255678] scsi 3:0:0:0: Direct-Access     WD       My Passport 070A 1028 PQ: 0 ANSI: 4
[ 1322.256449] scsi 3:0:0:1: CD-ROM            WD       Virtual CD 070A  1028 PQ: 0 ANSI: 4
[ 1322.259779] scsi 3:0:0:2: Enclosure         WD       SES Device       1028 PQ: 0 ANSI: 4
[ 1322.262960] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 1322.263900] sd 3:0:0:0: [sdc] 975400960 512-byte logical blocks: (499 GB/465 GiB)
[ 1322.265677] sr 3:0:0:1: [sr0] scsi3-mmc drive: 51x/51x caddy
[ 1322.265680] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1322.267152] sd 3:0:0:0: [sdc] Write Protect is off
[ 1322.267155] sd 3:0:0:0: [sdc] Mode Sense: 23 00 10 00
[ 1322.268626] sd 3:0:0:0: [sdc] No Caching mode page found
[ 1322.268633] sd 3:0:0:0: [sdc] Assuming drive cache: write back
[ 1322.286947] sr 3:0:0:1: Attached scsi CD-ROM sr0
[ 1322.287106] sr 3:0:0:1: Attached scsi generic sg3 type 5
[ 1322.287403] scsi 3:0:0:2: Attached scsi generic sg4 type 13
[ 1322.299716]  sdc: sdc1
[ 1322.308079] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 1322.308130] ses 3:0:0:2: Attached Enclosure device
[ 1350.840192] EXT4-fs (sdc1): bad geometry: block count 121965056 exceeds size of device (121924864 blocks)
[ 1787.614751] usb 3-1: USB disconnect, device number 5
[ 1787.616172] sd 3:0:0:0: [sdc] Synchronizing SCSI cache
[ 1787.616242] sd 3:0:0:0: [sdc] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 1787.974599] usb 3-1: new full-speed USB device number 6 using xhci_hcd
[ 1788.110608] usb 3-1: device descriptor read/64, error -71
[ 2018.160394] usb 3-1: new high-speed USB device number 7 using xhci_hcd
[ 2018.309328] usb 3-1: New USB device found, idVendor=1058, idProduct=070a, bcdDevice=10.28
[ 2018.309333] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2018.309336] usb 3-1: Product: My Passport 070A
[ 2018.309338] usb 3-1: Manufacturer: Western Digital
[ 2018.309341] usb 3-1: SerialNumber: 575834304138393131363132
[ 2018.312171] usb-storage 3-1:1.0: USB Mass Storage device detected
[ 2018.312341] usb-storage 3-1:1.0: Quirks match for vid 1058 pid 070a: 200000
[ 2018.312606] scsi host3: usb-storage 3-1:1.0
[ 2019.333564] scsi 3:0:0:0: Direct-Access     WD       My Passport 070A 1028 PQ: 0 ANSI: 4
[ 2019.334408] scsi 3:0:0:1: CD-ROM            WD       Virtual CD 070A  1028 PQ: 0 ANSI: 4
[ 2019.338011] scsi 3:0:0:2: Enclosure         WD       SES Device       1028 PQ: 0 ANSI: 4
[ 2019.341377] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 2019.344662] sd 3:0:0:0: [sdc] 975400960 512-byte logical blocks: (499 GB/465 GiB)
[ 2019.346473] sr 3:0:0:1: [sr0] scsi3-mmc drive: 51x/51x caddy
[ 2019.348039] sd 3:0:0:0: [sdc] Write Protect is off
[ 2019.348047] sd 3:0:0:0: [sdc] Mode Sense: 23 00 10 00
[ 2019.350713] sd 3:0:0:0: [sdc] No Caching mode page found
[ 2019.350719] sd 3:0:0:0: [sdc] Assuming drive cache: write back
[ 2019.364769] sr 3:0:0:1: Attached scsi CD-ROM sr0
[ 2019.364897] sr 3:0:0:1: Attached scsi generic sg3 type 5
[ 2019.365035] ses 3:0:0:2: Attached Enclosure device
[ 2019.365149] ses 3:0:0:2: Attached scsi generic sg4 type 13
[ 2019.381528]  sdc: sdc1
[ 2019.385907] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 2202.293797] EXT4-fs (sda2): warning: mounting fs with errors, running e2fsck is recommended
[ 2202.349810] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 2205.311452] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2205.311456] ata1.00: BMDMA stat 0x65
[ 2205.311460] ata1.00: failed command: READ DMA
[ 2205.311465] ata1.00: cmd c8/00:08:e0:2a:11/00:00:00:00:00/e0 tag 0 dma 4096 in
                        res 51/40:08:e0:2a:11/00:00:00:00:00/00 Emask 0x9 (media error)
[ 2205.311467] ata1.00: status: { DRDY ERR }
[ 2205.311468] ata1.00: error: { UNC }
[ 2205.317165] ata1.00: configured for UDMA/133
[ 2205.317178] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2205.317181] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] 
[ 2205.317184] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[ 2205.317186] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 11 2a e0 00 00 08 00
[ 2205.317189] blk_update_request: I/O error, dev sda, sector 1125088 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0
[ 2205.317222] EXT4-fs error (device sda2): __ext4_find_entry:1531: inode #2: comm pool: reading directory lblock 0
[ 2205.317232] EXT4-fs error (device sda2): __ext4_find_entry:1531: inode #2: comm pool: reading directory lblock 0
[ 2205.317236] EXT4-fs warning (device sda2): htree_dirblock_to_tree:997: inode #2: lblock 0: comm gvfs-udisks2-vo: error -5 reading directory block
[ 2205.317237] ata1: EH complete
[ 2208.299603] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2208.299608] ata1.00: BMDMA stat 0x65
[ 2208.299612] ata1.00: failed command: READ DMA
[ 2208.299618] ata1.00: cmd c8/00:08:e0:2a:11/00:00:00:00:00/e0 tag 0 dma 4096 in
                        res 51/40:08:e0:2a:11/00:00:00:00:00/00 Emask 0x9 (media error)
[ 2208.299621] ata1.00: status: { DRDY ERR }
[ 2208.299622] ata1.00: error: { UNC }
[ 2208.307417] ata1.00: configured for UDMA/133
[ 2208.307436] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2208.307441] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] 
[ 2208.307444] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[ 2208.307448] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 11 2a e0 00 00 08 00
[ 2208.307452] blk_update_request: I/O error, dev sda, sector 1125088 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0
[ 2208.307507] EXT4-fs warning (device sda2): htree_dirblock_to_tree:997: inode #2: lblock 0: comm gvfs-udisks2-vo: error -5 reading directory block
[ 2208.307529] EXT4-fs error (device sda2): __ext4_find_entry:1531: inode #2: comm gvfsd-trash: reading directory lblock 0
[ 2208.307536] ata1: EH complete
[ 2211.287708] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2211.287712] ata1.00: BMDMA stat 0x65
[ 2211.287715] ata1.00: failed command: READ DMA
[ 2211.287721] ata1.00: cmd c8/00:08:e0:2a:11/00:00:00:00:00/e0 tag 0 dma 4096 in
                        res 51/40:08:e0:2a:11/00:00:00:00:00/00 Emask 0x9 (media error)
[ 2211.287723] ata1.00: status: { DRDY ERR }
[ 2211.287725] ata1.00: error: { UNC }
[ 2211.295476] ata1.00: configured for UDMA/133
[ 2211.295489] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2211.295493] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] 
[ 2211.295496] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[ 2211.295498] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 11 2a e0 00 00 08 00
[ 2211.295502] blk_update_request: I/O error, dev sda, sector 1125088 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0
[ 2211.295527] EXT4-fs error (device sda2): __ext4_find_entry:1531: inode #2: comm gvfsd-trash: reading directory lblock 0
[ 2211.295533] EXT4-fs warning (device sda2): htree_dirblock_to_tree:997: inode #2: lblock 0: comm gvfs-udisks2-vo: error -5 reading directory block
[ 2211.295539] ata1: EH complete
[ 2214.299822] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2214.299831] ata1.00: BMDMA stat 0x65
[ 2214.299837] ata1.00: failed command: READ DMA
[ 2214.299848] ata1.00: cmd c8/00:08:e0:2a:11/00:00:00:00:00/e0 tag 0 dma 4096 in
                        res 51/40:08:e0:2a:11/00:00:00:00:00/00 Emask 0x9 (media error)
[ 2214.299853] ata1.00: status: { DRDY ERR }
[ 2214.299856] ata1.00: error: { UNC }
[ 2214.307759] ata1.00: configured for UDMA/133
[ 2214.307791] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2214.307799] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] 
[ 2214.307803] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[ 2214.307809] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 11 2a e0 00 00 08 00
[ 2214.307815] blk_update_request: I/O error, dev sda, sector 1125088 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0
[ 2214.307866] EXT4-fs warning (device sda2): htree_dirblock_to_tree:997: inode #2: lblock 0: comm gvfs-udisks2-vo: error -5 reading directory block
[ 2214.307882] ata1: EH complete
[ 2217.267910] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2217.267922] ata1.00: BMDMA stat 0x65
[ 2217.267933] ata1.00: failed command: READ DMA
[ 2217.267953] ata1.00: cmd c8/00:08:e0:2a:11/00:00:00:00:00/e0 tag 0 dma 4096 in
                        res 51/40:08:e0:2a:11/00:00:00:00:00/00 Emask 0x9 (media error)
[ 2217.267961] ata1.00: status: { DRDY ERR }
[ 2217.267968] ata1.00: error: { UNC }
[ 2217.276058] ata1.00: configured for UDMA/133
[ 2217.276092] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2217.276101] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] 
[ 2217.276107] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[ 2217.276113] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 11 2a e0 00 00 08 00
[ 2217.276119] blk_update_request: I/O error, dev sda, sector 1125088 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0
[ 2217.276181] ata1: EH complete
[ 2217.276197] EXT4-fs warning (device sda2): htree_dirblock_to_tree:997: inode #2: lblock 0: comm gvfs-udisks2-vo: error -5 reading directory block
[ 2220.236074] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2220.236082] ata1.00: BMDMA stat 0x65
[ 2220.236089] ata1.00: failed command: READ DMA
[ 2220.236099] ata1.00: cmd c8/00:08:e0:2a:11/00:00:00:00:00/e0 tag 0 dma 4096 in
                        res 51/40:08:e0:2a:11/00:00:00:00:00/00 Emask 0x9 (media error)
[ 2220.236104] ata1.00: status: { DRDY ERR }
[ 2220.236107] ata1.00: error: { UNC }
[ 2220.244001] ata1.00: configured for UDMA/133
[ 2220.244025] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2220.244031] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] 
[ 2220.244037] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[ 2220.244042] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 11 2a e0 00 00 08 00
[ 2220.244048] blk_update_request: I/O error, dev sda, sector 1125088 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0
[ 2220.244094] EXT4-fs warning (device sda2): htree_dirblock_to_tree:997: inode #2: lblock 0: comm gvfs-udisks2-vo: error -5 reading directory block
[ 2220.244097] ata1: EH complete
[ 2223.208220] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2223.208229] ata1.00: BMDMA stat 0x65
[ 2223.208235] ata1.00: failed command: READ DMA
[ 2223.208246] ata1.00: cmd c8/00:08:e0:2a:11/00:00:00:00:00/e0 tag 0 dma 4096 in
                        res 51/40:08:e0:2a:11/00:00:00:00:00/00 Emask 0x9 (media error)
[ 2223.208250] ata1.00: status: { DRDY ERR }
[ 2223.208254] ata1.00: error: { UNC }
[ 2223.216085] ata1.00: configured for UDMA/133
[ 2223.216110] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2223.216117] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] 
[ 2223.216122] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[ 2223.216127] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 11 2a e0 00 00 08 00
[ 2223.216133] blk_update_request: I/O error, dev sda, sector 1125088 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0
[ 2223.216182] ata1: EH complete
[ 2223.216215] EXT4-fs warning (device sda2): htree_dirblock_to_tree:997: inode #2: lblock 0: comm gvfs-udisks2-vo: error -5 reading directory block
[ 2226.176334] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2226.176341] ata1.00: BMDMA stat 0x65
[ 2226.176346] ata1.00: failed command: READ DMA
[ 2226.176355] ata1.00: cmd c8/00:08:e0:2a:11/00:00:00:00:00/e0 tag 0 dma 4096 in
                        res 51/40:08:e0:2a:11/00:00:00:00:00/00 Emask 0x9 (media error)
[ 2226.176358] ata1.00: status: { DRDY ERR }
[ 2226.176361] ata1.00: error: { UNC }
[ 2226.184309] ata1.00: configured for UDMA/133
[ 2226.184333] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2226.184338] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] 
[ 2226.184343] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[ 2226.184347] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 11 2a e0 00 00 08 00
[ 2226.184353] blk_update_request: I/O error, dev sda, sector 1125088 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0
[ 2226.184392] EXT4-fs warning (device sda2): htree_dirblock_to_tree:997: inode #2: lblock 0: comm gvfs-udisks2-vo: error -5 reading directory block
[ 2226.184405] ata1: EH complete
[ 2229.148433] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2229.148441] ata1.00: BMDMA stat 0x65
[ 2229.148447] ata1.00: failed command: READ DMA
[ 2229.148458] ata1.00: cmd c8/00:08:e0:2a:11/00:00:00:00:00/e0 tag 0 dma 4096 in
                        res 51/40:08:e0:2a:11/00:00:00:00:00/00 Emask 0x9 (media error)
[ 2229.148462] ata1.00: status: { DRDY ERR }
[ 2229.148466] ata1.00: error: { UNC }
[ 2229.156497] ata1.00: configured for UDMA/133
[ 2229.156525] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2229.156532] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] 
[ 2229.156537] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[ 2229.156543] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 11 2a e0 00 00 08 00
[ 2229.156549] blk_update_request: I/O error, dev sda, sector 1125088 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0
[ 2229.156595] ata1: EH complete
[ 2229.156627] EXT4-fs warning (device sda2): htree_dirblock_to_tree:997: inode #2: lblock 0: comm gvfs-udisks2-vo: error -5 reading directory block
[ 2232.116435] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2232.116442] ata1.00: BMDMA stat 0x65
[ 2232.116448] ata1.00: failed command: READ DMA
[ 2232.116458] ata1.00: cmd c8/00:08:e0:2a:11/00:00:00:00:00/e0 tag 0 dma 4096 in
                        res 51/40:08:e0:2a:11/00:00:00:00:00/00 Emask 0x9 (media error)
[ 2232.116462] ata1.00: status: { DRDY ERR }
[ 2232.116465] ata1.00: error: { UNC }
[ 2232.124324] ata1.00: configured for UDMA/133
[ 2232.124348] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2232.124392] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] 
[ 2232.124406] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[ 2232.124415] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 11 2a e0 00 00 08 00
[ 2232.124423] blk_update_request: I/O error, dev sda, sector 1125088 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0
[ 2232.124494] EXT4-fs warning (device sda2): htree_dirblock_to_tree:997: inode #2: lblock 0: comm gvfs-udisks2-vo: error -5 reading directory block
[ 2232.124497] ata1: EH complete
[ 2235.100621] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2235.100629] ata1.00: BMDMA stat 0x65
[ 2235.100635] ata1.00: failed command: READ DMA
[ 2235.100646] ata1.00: cmd c8/00:08:e0:2a:11/00:00:00:00:00/e0 tag 0 dma 4096 in
                        res 51/40:08:e0:2a:11/00:00:00:00:00/00 Emask 0x9 (media error)
[ 2235.100650] ata1.00: status: { DRDY ERR }
[ 2235.100654] ata1.00: error: { UNC }
[ 2235.108505] ata1.00: configured for UDMA/133
[ 2235.108530] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2235.108536] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] 
[ 2235.108542] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[ 2235.108547] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 11 2a e0 00 00 08 00
[ 2235.108553] blk_update_request: I/O error, dev sda, sector 1125088 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0
[ 2235.108598] ata1: EH complete
[ 2235.108629] EXT4-fs warning (device sda2): htree_dirblock_to_tree:997: inode #2: lblock 0: comm gvfs-udisks2-vo: error -5 reading directory block
[ 2238.068640] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2238.068648] ata1.00: BMDMA stat 0x65
[ 2238.068653] ata1.00: failed command: READ DMA
[ 2238.068664] ata1.00: cmd c8/00:08:e0:2a:11/00:00:00:00:00/e0 tag 0 dma 4096 in
                        res 51/40:08:e0:2a:11/00:00:00:00:00/00 Emask 0x9 (media error)
[ 2238.068668] ata1.00: status: { DRDY ERR }
[ 2238.068672] ata1.00: error: { UNC }
[ 2238.076525] ata1.00: configured for UDMA/133
[ 2238.076549] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2238.076555] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] 
[ 2238.076561] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[ 2238.076624] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 11 2a e0 00 00 08 00
[ 2238.076632] blk_update_request: I/O error, dev sda, sector 1125088 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0
[ 2238.076687] EXT4-fs warning (device sda2): htree_dirblock_to_tree:997: inode #2: lblock 0: comm gvfs-udisks2-vo: error -5 reading directory block
[ 2238.076690] ata1: EH complete
[ 2241.040739] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2241.040742] ata1.00: BMDMA stat 0x65
[ 2241.040745] ata1.00: failed command: READ DMA
[ 2241.040749] ata1.00: cmd c8/00:08:e0:2a:11/00:00:00:00:00/e0 tag 0 dma 4096 in
                        res 51/40:08:e0:2a:11/00:00:00:00:00/00 Emask 0x9 (media error)
[ 2241.040750] ata1.00: status: { DRDY ERR }
[ 2241.040751] ata1.00: error: { UNC }
[ 2241.048433] ata1.00: configured for UDMA/133
[ 2241.048446] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2241.048449] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] 
[ 2241.048451] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[ 2241.048454] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 11 2a e0 00 00 08 00
[ 2241.048456] blk_update_request: I/O error, dev sda, sector 1125088 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0
[ 2241.048476] EXT4-fs warning (device sda2): htree_dirblock_to_tree:997: inode #2: lblock 0: comm gvfs-udisks2-vo: error -5 reading directory block
[ 2241.048478] ata1: EH complete
[ 2244.016934] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2244.016942] ata1.00: BMDMA stat 0x65
[ 2244.016948] ata1.00: failed command: READ DMA
[ 2244.016959] ata1.00: cmd c8/00:08:e0:2a:11/00:00:00:00:00/e0 tag 0 dma 4096 in
                        res 51/40:08:e0:2a:11/00:00:00:00:00/00 Emask 0x9 (media error)
[ 2244.016963] ata1.00: status: { DRDY ERR }
[ 2244.016966] ata1.00: error: { UNC }
[ 2244.024860] ata1.00: configured for UDMA/133
[ 2244.024886] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2244.024892] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] 
[ 2244.024897] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[ 2244.024902] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 11 2a e0 00 00 08 00
[ 2244.024908] blk_update_request: I/O error, dev sda, sector 1125088 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0
[ 2244.024949] EXT4-fs warning (device sda2): htree_dirblock_to_tree:997: inode #2: lblock 0: comm gvfs-udisks2-vo: error -5 reading directory block
[ 2244.024951] ata1: EH complete
[ 2246.985062] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2246.985067] ata1.00: BMDMA stat 0x65
[ 2246.985071] ata1.00: failed command: READ DMA
[ 2246.985079] ata1.00: cmd c8/00:08:e0:2a:11/00:00:00:00:00/e0 tag 0 dma 4096 in
                        res 51/40:08:e0:2a:11/00:00:00:00:00/00 Emask 0x9 (media error)
[ 2246.985082] ata1.00: status: { DRDY ERR }
[ 2246.985084] ata1.00: error: { UNC }
[ 2246.993203] ata1.00: configured for UDMA/133
[ 2246.993224] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2246.993229] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] 
[ 2246.993233] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[ 2246.993237] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 11 2a e0 00 00 08 00
[ 2246.993241] blk_update_request: I/O error, dev sda, sector 1125088 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0
[ 2246.993295] ata1: EH complete
[ 2246.993303] EXT4-fs warning (device sda2): htree_dirblock_to_tree:997: inode #2: lblock 0: comm gvfs-udisks2-vo: error -5 reading directory block
[ 2249.965090] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2249.965102] ata1.00: BMDMA stat 0x65
[ 2249.965110] ata1.00: failed command: READ DMA
[ 2249.965126] ata1.00: cmd c8/00:08:e0:2a:11/00:00:00:00:00/e0 tag 0 dma 4096 in
                        res 51/40:08:e0:2a:11/00:00:00:00:00/00 Emask 0x9 (media error)
[ 2249.965132] ata1.00: status: { DRDY ERR }
[ 2249.965137] ata1.00: error: { UNC }
[ 2249.972937] ata1.00: configured for UDMA/133
[ 2249.972959] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2249.972965] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] 
[ 2249.973018] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[ 2249.973025] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 11 2a e0 00 00 08 00
[ 2249.973030] blk_update_request: I/O error, dev sda, sector 1125088 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0
[ 2249.973075] EXT4-fs warning (device sda2): htree_dirblock_to_tree:997: inode #2: lblock 0: comm gvfs-udisks2-vo: error -5 reading directory block
[ 2249.973077] ata1: EH complete
[ 2252.953218] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2252.953223] ata1.00: BMDMA stat 0x65
[ 2252.953227] ata1.00: failed command: READ DMA
[ 2252.953234] ata1.00: cmd c8/00:08:e0:2a:11/00:00:00:00:00/e0 tag 0 dma 4096 in
                        res 51/40:08:e0:2a:11/00:00:00:00:00/00 Emask 0x9 (media error)
[ 2252.953237] ata1.00: status: { DRDY ERR }
[ 2252.953239] ata1.00: error: { UNC }
[ 2252.961232] ata1.00: configured for UDMA/133
[ 2252.961256] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2252.961261] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] 
[ 2252.961266] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[ 2252.961270] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 11 2a e0 00 00 08 00
[ 2252.961275] blk_update_request: I/O error, dev sda, sector 1125088 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0
[ 2252.961330] ata1: EH complete
[ 2252.961337] EXT4-fs warning (device sda2): htree_dirblock_to_tree:997: inode #2: lblock 0: comm gvfs-udisks2-vo: error -5 reading directory block
[ 2255.917274] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2255.917281] ata1.00: BMDMA stat 0x65
[ 2255.917285] ata1.00: failed command: READ DMA
[ 2255.917294] ata1.00: cmd c8/00:08:e0:2a:11/00:00:00:00:00/e0 tag 0 dma 4096 in
                        res 51/40:08:e0:2a:11/00:00:00:00:00/00 Emask 0x9 (media error)
[ 2255.917298] ata1.00: status: { DRDY ERR }
[ 2255.917301] ata1.00: error: { UNC }
[ 2255.925212] ata1.00: configured for UDMA/133
[ 2255.925243] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2255.925250] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] 
[ 2255.925257] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[ 2255.925266] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 11 2a e0 00 00 08 00
[ 2255.925274] blk_update_request: I/O error, dev sda, sector 1125088 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0
[ 2255.925317] EXT4-fs warning (device sda2): htree_dirblock_to_tree:997: inode #2: lblock 0: comm gvfs-udisks2-vo: error -5 reading directory block
[ 2255.925323] ata1: EH complete
[ 2258.885413] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2258.885421] ata1.00: BMDMA stat 0x65
[ 2258.885428] ata1.00: failed command: READ DMA
[ 2258.885438] ata1.00: cmd c8/00:08:e0:2a:11/00:00:00:00:00/e0 tag 0 dma 4096 in
                        res 51/40:08:e0:2a:11/00:00:00:00:00/00 Emask 0x9 (media error)
[ 2258.885443] ata1.00: status: { DRDY ERR }
[ 2258.885446] ata1.00: error: { UNC }
[ 2258.893411] ata1.00: configured for UDMA/133
[ 2258.893438] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2258.893445] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] 
[ 2258.893451] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[ 2258.893456] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 11 2a e0 00 00 08 00
[ 2258.893463] blk_update_request: I/O error, dev sda, sector 1125088 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0
[ 2258.893512] EXT4-fs warning (device sda2): htree_dirblock_to_tree:997: inode #2: lblock 0: comm gvfs-udisks2-vo: error -5 reading directory block
[ 2258.893526] ata1: EH complete
[ 2261.845537] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2261.845546] ata1.00: BMDMA stat 0x65
[ 2261.845551] ata1.00: failed command: READ DMA
[ 2261.845562] ata1.00: cmd c8/00:08:e0:2a:11/00:00:00:00:00/e0 tag 0 dma 4096 in
                        res 51/40:08:e0:2a:11/00:00:00:00:00/00 Emask 0x9 (media error)
[ 2261.845566] ata1.00: status: { DRDY ERR }
[ 2261.845570] ata1.00: error: { UNC }
[ 2261.853456] ata1.00: configured for UDMA/133
[ 2261.853480] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2261.853486] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] 
[ 2261.853490] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[ 2261.853496] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 11 2a e0 00 00 08 00
[ 2261.853502] blk_update_request: I/O error, dev sda, sector 1125088 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0
[ 2261.853550] ata1: EH complete
[ 2261.853581] EXT4-fs warning (device sda2): htree_dirblock_to_tree:997: inode #2: lblock 0: comm gvfs-udisks2-vo: error -5 reading directory block
[ 2264.821633] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2264.821642] ata1.00: BMDMA stat 0x65
[ 2264.821647] ata1.00: failed command: READ DMA
[ 2264.821658] ata1.00: cmd c8/00:08:e0:2a:11/00:00:00:00:00/e0 tag 0 dma 4096 in
                        res 51/40:08:e0:2a:11/00:00:00:00:00/00 Emask 0x9 (media error)
[ 2264.821663] ata1.00: status: { DRDY ERR }
[ 2264.821666] ata1.00: error: { UNC }
[ 2264.829639] ata1.00: configured for UDMA/133
[ 2264.829667] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2264.829674] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] 
[ 2264.829679] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[ 2264.829685] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 11 2a e0 00 00 08 00
[ 2264.829691] blk_update_request: I/O error, dev sda, sector 1125088 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0
[ 2264.829738] EXT4-fs warning (device sda2): htree_dirblock_to_tree:997: inode #2: lblock 0: comm gvfs-udisks2-vo: error -5 reading directory block
[ 2264.829741] ata1: EH complete
[ 2267.793731] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2267.793739] ata1.00: BMDMA stat 0x65
[ 2267.793746] ata1.00: failed command: READ DMA
[ 2267.793757] ata1.00: cmd c8/00:08:e0:2a:11/00:00:00:00:00/e0 tag 0 dma 4096 in
                        res 51/40:08:e0:2a:11/00:00:00:00:00/00 Emask 0x9 (media error)
[ 2267.793761] ata1.00: status: { DRDY ERR }
[ 2267.793765] ata1.00: error: { UNC }
[ 2267.801670] ata1.00: configured for UDMA/133
[ 2267.801694] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2267.801701] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] 
[ 2267.801705] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[ 2267.801710] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 11 2a e0 00 00 08 00
[ 2267.801716] blk_update_request: I/O error, dev sda, sector 1125088 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0
[ 2267.801778] ata1: EH complete
[ 2267.801791] EXT4-fs warning (device sda2): htree_dirblock_to_tree:997: inode #2: lblock 0: comm gvfs-udisks2-vo: error -5 reading directory block
[ 2270.753802] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2270.753814] ata1.00: BMDMA stat 0x65
[ 2270.753820] ata1.00: failed command: READ DMA
[ 2270.753831] ata1.00: cmd c8/00:08:e0:2a:11/00:00:00:00:00/e0 tag 0 dma 4096 in
                        res 51/40:08:e0:2a:11/00:00:00:00:00/00 Emask 0x9 (media error)
[ 2270.753835] ata1.00: status: { DRDY ERR }
[ 2270.753839] ata1.00: error: { UNC }
[ 2270.761747] ata1.00: configured for UDMA/133
[ 2270.761773] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2270.761779] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] 
[ 2270.761784] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[ 2270.761789] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 11 2a e0 00 00 08 00
[ 2270.761795] blk_update_request: I/O error, dev sda, sector 1125088 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0
[ 2270.761833] EXT4-fs warning (device sda2): htree_dirblock_to_tree:997: inode #2: lblock 0: comm gvfs-udisks2-vo: error -5 reading directory block
[ 2270.761836] ata1: EH complete
[ 2273.721878] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2273.721886] ata1.00: BMDMA stat 0x65
[ 2273.721891] ata1.00: failed command: READ DMA
[ 2273.721900] ata1.00: cmd c8/00:08:e0:2a:11/00:00:00:00:00/e0 tag 0 dma 4096 in
                        res 51/40:08:e0:2a:11/00:00:00:00:00/00 Emask 0x9 (media error)
[ 2273.721904] ata1.00: status: { DRDY ERR }
[ 2273.721907] ata1.00: error: { UNC }
[ 2273.729821] ata1.00: configured for UDMA/133
[ 2273.729845] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2273.729850] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] 
[ 2273.729856] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[ 2273.729861] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 11 2a e0 00 00 08 00
[ 2273.729868] blk_update_request: I/O error, dev sda, sector 1125088 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0
[ 2273.729911] EXT4-fs warning (device sda2): htree_dirblock_to_tree:997: inode #2: lblock 0: comm gvfs-udisks2-vo: error -5 reading directory block
[ 2273.729924] ata1: EH complete
[ 2276.705978] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2276.705987] ata1.00: BMDMA stat 0x65
[ 2276.705993] ata1.00: failed command: READ DMA
[ 2276.706003] ata1.00: cmd c8/00:08:e0:2a:11/00:00:00:00:00/e0 tag 0 dma 4096 in
                        res 51/40:08:e0:2a:11/00:00:00:00:00/00 Emask 0x9 (media error)
[ 2276.706008] ata1.00: status: { DRDY ERR }
[ 2276.706011] ata1.00: error: { UNC }
[ 2276.714105] ata1.00: configured for UDMA/133
[ 2276.714133] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2276.714140] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] 
[ 2276.714145] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[ 2276.714151] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 11 2a e0 00 00 08 00
[ 2276.714157] blk_update_request: I/O error, dev sda, sector 1125088 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0
[ 2276.714228] ata1: EH complete
[ 2276.714236] EXT4-fs warning (device sda2): htree_dirblock_to_tree:997: inode #2: lblock 0: comm gvfs-udisks2-vo: error -5 reading directory block
[ 2279.686109] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2279.686115] ata1.00: BMDMA stat 0x65
[ 2279.686120] ata1.00: failed command: READ DMA
[ 2279.686128] ata1.00: cmd c8/00:08:e0:2a:11/00:00:00:00:00/e0 tag 0 dma 4096 in
                        res 51/40:08:e0:2a:11/00:00:00:00:00/00 Emask 0x9 (media error)
[ 2279.686131] ata1.00: status: { DRDY ERR }
[ 2279.686133] ata1.00: error: { UNC }
[ 2279.692101] ata1.00: configured for UDMA/133
[ 2279.692122] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2279.692127] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] 
[ 2279.692131] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[ 2279.692135] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 11 2a e0 00 00 08 00
[ 2279.692140] blk_update_request: I/O error, dev sda, sector 1125088 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0
[ 2279.692185] EXT4-fs warning (device sda2): htree_dirblock_to_tree:997: inode #2: lblock 0: comm pool: error -5 reading directory block
[ 2279.692187] ata1: EH complete
[ 2279.692199] EXT4-fs warning (device sda2): htree_dirblock_to_tree:997: inode #2: lblock 0: comm pool: error -5 reading directory block
[ 2282.646125] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2282.646134] ata1.00: BMDMA stat 0x65
[ 2282.646140] ata1.00: failed command: READ DMA
[ 2282.646151] ata1.00: cmd c8/00:08:e0:2a:11/00:00:00:00:00/e0 tag 0 dma 4096 in
                        res 51/40:08:e0:2a:11/00:00:00:00:00/00 Emask 0x9 (media error)
[ 2282.646155] ata1.00: status: { DRDY ERR }
[ 2282.646158] ata1.00: error: { UNC }
[ 2282.654100] ata1.00: configured for UDMA/133
[ 2282.654124] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2282.654130] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] 
[ 2282.654134] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[ 2282.654140] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 11 2a e0 00 00 08 00
[ 2282.654146] blk_update_request: I/O error, dev sda, sector 1125088 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0
[ 2282.654212] ata1: EH complete
[ 2282.654219] EXT4-fs error (device sda2): __ext4_find_entry:1531: inode #2: comm pool: reading directory lblock 0
[ 2497.530544] usb 3-1: USB disconnect, device number 7
[ 2497.532709] sd 3:0:0:0: [sdc] Synchronizing SCSI cache
[ 2497.532869] sd 3:0:0:0: [sdc] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 2511.526488] EXT4-fs (sda2): error count since last fsck: 435
[ 2511.526530] EXT4-fs (sda2): initial error at time 1598801477: __ext4_find_entry:1531: inode 2
[ 2511.526542] EXT4-fs (sda2): last error at time 1599832084: __ext4_find_entry:1531: inode 2

ici j'ai fait un grep sda sur le retour precedent, je pense que sa va simplifier la lecture :

[    1.509796] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    1.509797] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.509810] sd 0:0:0:0: [sda] Write Protect is off
[    1.509811] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.509833] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.838732]  sda: sda1 sda2
[    1.839147] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.911139] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    6.887393] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[    6.887397] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] 
[    6.887399] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[    6.887402] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 11 2a e0 00 00 08 00
[    6.887404] blk_update_request: I/O error, dev sda, sector 1125088 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0
[    6.887437] EXT4-fs error (device sda2): __ext4_find_entry:1531: inode #2: comm sh: reading directory lblock 0
[   10.981800] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   11.217046] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   11.304575] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 2202.293797] EXT4-fs (sda2): warning: mounting fs with errors, running e2fsck is recommended
[ 2202.349810] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 2205.317178] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2205.317181] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] 
[ 2205.317184] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[ 2205.317186] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 11 2a e0 00 00 08 00
[ 2205.317189] blk_update_request: I/O error, dev sda, sector 1125088 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0
[ 2205.317222] EXT4-fs error (device sda2): __ext4_find_entry:1531: inode #2: comm pool: reading directory lblock 0
[ 2205.317232] EXT4-fs error (device sda2): __ext4_find_entry:1531: inode #2: comm pool: reading directory lblock 0
[ 2205.317236] EXT4-fs warning (device sda2): htree_dirblock_to_tree:997: inode #2: lblock 0: comm gvfs-udisks2-vo: error -5 reading directory block
[ 2208.307436] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2208.307441] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] 
[ 2208.307444] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[ 2208.307448] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 11 2a e0 00 00 08 00
[ 2208.307452] blk_update_request: I/O error, dev sda, sector 1125088 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0
[ 2208.307507] EXT4-fs warning (device sda2): htree_dirblock_to_tree:997: inode #2: lblock 0: comm gvfs-udisks2-vo: error -5 reading directory block
[ 2208.307529] EXT4-fs error (device sda2): __ext4_find_entry:1531: inode #2: comm gvfsd-trash: reading directory lblock 0
[ 2211.295489] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2211.295493] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] 
[ 2211.295496] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[ 2211.295498] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 11 2a e0 00 00 08 00
[ 2211.295502] blk_update_request: I/O error, dev sda, sector 1125088 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0
[ 2211.295527] EXT4-fs error (device sda2): __ext4_find_entry:1531: inode #2: comm gvfsd-trash: reading directory lblock 0
[ 2211.295533] EXT4-fs warning (device sda2): htree_dirblock_to_tree:997: inode #2: lblock 0: comm gvfs-udisks2-vo: error -5 reading directory block
[ 2214.307791] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2214.307799] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] 
[ 2214.307803] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[ 2214.307809] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 11 2a e0 00 00 08 00
[ 2214.307815] blk_update_request: I/O error, dev sda, sector 1125088 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0
[ 2214.307866] EXT4-fs warning (device sda2): htree_dirblock_to_tree:997: inode #2: lblock 0: comm gvfs-udisks2-vo: error -5 reading directory block
[ 2217.276092] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2217.276101] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] 
[ 2217.276107] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[ 2217.276113] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 11 2a e0 00 00 08 00
[ 2217.276119] blk_update_request: I/O error, dev sda, sector 1125088 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0
[ 2217.276197] EXT4-fs warning (device sda2): htree_dirblock_to_tree:997: inode #2: lblock 0: comm gvfs-udisks2-vo: error -5 reading directory block
[ 2220.244025] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2220.244031] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] 
[ 2220.244037] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[ 2220.244042] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 11 2a e0 00 00 08 00
[ 2220.244048] blk_update_request: I/O error, dev sda, sector 1125088 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0
[ 2220.244094] EXT4-fs warning (device sda2): htree_dirblock_to_tree:997: inode #2: lblock 0: comm gvfs-udisks2-vo: error -5 reading directory block
[ 2223.216110] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2223.216117] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] 
[ 2223.216122] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[ 2223.216127] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 11 2a e0 00 00 08 00
[ 2223.216133] blk_update_request: I/O error, dev sda, sector 1125088 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0
[ 2223.216215] EXT4-fs warning (device sda2): htree_dirblock_to_tree:997: inode #2: lblock 0: comm gvfs-udisks2-vo: error -5 reading directory block
[ 2226.184333] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2226.184338] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] 
[ 2226.184343] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[ 2226.184347] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 11 2a e0 00 00 08 00
[ 2226.184353] blk_update_request: I/O error, dev sda, sector 1125088 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0
[ 2226.184392] EXT4-fs warning (device sda2): htree_dirblock_to_tree:997: inode #2: lblock 0: comm gvfs-udisks2-vo: error -5 reading directory block
[ 2229.156525] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2229.156532] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] 
[ 2229.156537] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[ 2229.156543] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 11 2a e0 00 00 08 00
[ 2229.156549] blk_update_request: I/O error, dev sda, sector 1125088 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0
[ 2229.156627] EXT4-fs warning (device sda2): htree_dirblock_to_tree:997: inode #2: lblock 0: comm gvfs-udisks2-vo: error -5 reading directory block
[ 2232.124348] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2232.124392] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] 
[ 2232.124406] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[ 2232.124415] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 11 2a e0 00 00 08 00
[ 2232.124423] blk_update_request: I/O error, dev sda, sector 1125088 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0
[ 2232.124494] EXT4-fs warning (device sda2): htree_dirblock_to_tree:997: inode #2: lblock 0: comm gvfs-udisks2-vo: error -5 reading directory block
[ 2235.108530] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2235.108536] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] 
[ 2235.108542] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[ 2235.108547] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 11 2a e0 00 00 08 00
[ 2235.108553] blk_update_request: I/O error, dev sda, sector 1125088 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0
[ 2235.108629] EXT4-fs warning (device sda2): htree_dirblock_to_tree:997: inode #2: lblock 0: comm gvfs-udisks2-vo: error -5 reading directory block
[ 2238.076549] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2238.076555] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] 
[ 2238.076561] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[ 2238.076624] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 11 2a e0 00 00 08 00
[ 2238.076632] blk_update_request: I/O error, dev sda, sector 1125088 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0
[ 2238.076687] EXT4-fs warning (device sda2): htree_dirblock_to_tree:997: inode #2: lblock 0: comm gvfs-udisks2-vo: error -5 reading directory block
[ 2241.048446] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2241.048449] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] 
[ 2241.048451] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[ 2241.048454] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 11 2a e0 00 00 08 00
[ 2241.048456] blk_update_request: I/O error, dev sda, sector 1125088 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0
[ 2241.048476] EXT4-fs warning (device sda2): htree_dirblock_to_tree:997: inode #2: lblock 0: comm gvfs-udisks2-vo: error -5 reading directory block
[ 2244.024886] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2244.024892] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] 
[ 2244.024897] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[ 2244.024902] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 11 2a e0 00 00 08 00
[ 2244.024908] blk_update_request: I/O error, dev sda, sector 1125088 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0
[ 2244.024949] EXT4-fs warning (device sda2): htree_dirblock_to_tree:997: inode #2: lblock 0: comm gvfs-udisks2-vo: error -5 reading directory block
[ 2246.993224] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2246.993229] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] 
[ 2246.993233] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[ 2246.993237] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 11 2a e0 00 00 08 00
[ 2246.993241] blk_update_request: I/O error, dev sda, sector 1125088 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0
[ 2246.993303] EXT4-fs warning (device sda2): htree_dirblock_to_tree:997: inode #2: lblock 0: comm gvfs-udisks2-vo: error -5 reading directory block
[ 2249.972959] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2249.972965] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] 
[ 2249.973018] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[ 2249.973025] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 11 2a e0 00 00 08 00
[ 2249.973030] blk_update_request: I/O error, dev sda, sector 1125088 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0
[ 2249.973075] EXT4-fs warning (device sda2): htree_dirblock_to_tree:997: inode #2: lblock 0: comm gvfs-udisks2-vo: error -5 reading directory block
[ 2252.961256] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2252.961261] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] 
[ 2252.961266] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[ 2252.961270] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 11 2a e0 00 00 08 00
[ 2252.961275] blk_update_request: I/O error, dev sda, sector 1125088 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0
[ 2252.961337] EXT4-fs warning (device sda2): htree_dirblock_to_tree:997: inode #2: lblock 0: comm gvfs-udisks2-vo: error -5 reading directory block
[ 2255.925243] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2255.925250] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] 
[ 2255.925257] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[ 2255.925266] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 11 2a e0 00 00 08 00
[ 2255.925274] blk_update_request: I/O error, dev sda, sector 1125088 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0
[ 2255.925317] EXT4-fs warning (device sda2): htree_dirblock_to_tree:997: inode #2: lblock 0: comm gvfs-udisks2-vo: error -5 reading directory block
[ 2258.893438] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2258.893445] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] 
[ 2258.893451] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[ 2258.893456] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 11 2a e0 00 00 08 00
[ 2258.893463] blk_update_request: I/O error, dev sda, sector 1125088 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0
[ 2258.893512] EXT4-fs warning (device sda2): htree_dirblock_to_tree:997: inode #2: lblock 0: comm gvfs-udisks2-vo: error -5 reading directory block
[ 2261.853480] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2261.853486] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] 
[ 2261.853490] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[ 2261.853496] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 11 2a e0 00 00 08 00
[ 2261.853502] blk_update_request: I/O error, dev sda, sector 1125088 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0
[ 2261.853581] EXT4-fs warning (device sda2): htree_dirblock_to_tree:997: inode #2: lblock 0: comm gvfs-udisks2-vo: error -5 reading directory block
[ 2264.829667] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2264.829674] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] 
[ 2264.829679] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[ 2264.829685] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 11 2a e0 00 00 08 00
[ 2264.829691] blk_update_request: I/O error, dev sda, sector 1125088 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0
[ 2264.829738] EXT4-fs warning (device sda2): htree_dirblock_to_tree:997: inode #2: lblock 0: comm gvfs-udisks2-vo: error -5 reading directory block
[ 2267.801694] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2267.801701] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] 
[ 2267.801705] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[ 2267.801710] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 11 2a e0 00 00 08 00
[ 2267.801716] blk_update_request: I/O error, dev sda, sector 1125088 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0
[ 2267.801791] EXT4-fs warning (device sda2): htree_dirblock_to_tree:997: inode #2: lblock 0: comm gvfs-udisks2-vo: error -5 reading directory block
[ 2270.761773] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2270.761779] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] 
[ 2270.761784] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[ 2270.761789] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 11 2a e0 00 00 08 00
[ 2270.761795] blk_update_request: I/O error, dev sda, sector 1125088 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0
[ 2270.761833] EXT4-fs warning (device sda2): htree_dirblock_to_tree:997: inode #2: lblock 0: comm gvfs-udisks2-vo: error -5 reading directory block
[ 2273.729845] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2273.729850] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] 
[ 2273.729856] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[ 2273.729861] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 11 2a e0 00 00 08 00
[ 2273.729868] blk_update_request: I/O error, dev sda, sector 1125088 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0
[ 2273.729911] EXT4-fs warning (device sda2): htree_dirblock_to_tree:997: inode #2: lblock 0: comm gvfs-udisks2-vo: error -5 reading directory block
[ 2276.714133] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2276.714140] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] 
[ 2276.714145] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[ 2276.714151] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 11 2a e0 00 00 08 00
[ 2276.714157] blk_update_request: I/O error, dev sda, sector 1125088 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0
[ 2276.714236] EXT4-fs warning (device sda2): htree_dirblock_to_tree:997: inode #2: lblock 0: comm gvfs-udisks2-vo: error -5 reading directory block
[ 2279.692122] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2279.692127] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] 
[ 2279.692131] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[ 2279.692135] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 11 2a e0 00 00 08 00
[ 2279.692140] blk_update_request: I/O error, dev sda, sector 1125088 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0
[ 2279.692185] EXT4-fs warning (device sda2): htree_dirblock_to_tree:997: inode #2: lblock 0: comm pool: error -5 reading directory block
[ 2279.692199] EXT4-fs warning (device sda2): htree_dirblock_to_tree:997: inode #2: lblock 0: comm pool: error -5 reading directory block
[ 2282.654124] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2282.654130] sd 0:0:0:0: [sda] tag#0 Sense Key : Medium Error [current] 
[ 2282.654134] sd 0:0:0:0: [sda] tag#0 Add. Sense: Unrecovered read error - auto reallocate failed
[ 2282.654140] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 11 2a e0 00 00 08 00
[ 2282.654146] blk_update_request: I/O error, dev sda, sector 1125088 op 0x0:(READ) flags 0x3000 phys_seg 1 prio class 0
[ 2282.654219] EXT4-fs error (device sda2): __ext4_find_entry:1531: inode #2: comm pool: reading directory lblock 0
[ 2511.526488] EXT4-fs (sda2): error count since last fsck: 435
[ 2511.526530] EXT4-fs (sda2): initial error at time 1598801477: __ext4_find_entry:1531: inode 2
[ 2511.526542] EXT4-fs (sda2): last error at time 1599832084: __ext4_find_entry:1531: inode 2

Dernière modification par pigrosol (Le 11/09/2020, à 16:07)

pigrosol · Le 11/09/2020, à 16:48

bon je viens de récupérer un dde de 1to que je pensais mort; mais en le branchant sur usb3 il se connecte bien; (je viens de voir comment reconnaitre si le port usb est un usb3 ou pas .. on en apprend tout les jours _heureusement_)
bon du coup, je le formate et après je refais un ddrescue complet dessus.

Dernière modification par pigrosol (Le 11/09/2020, à 16:57)

geole · Le 11/09/2020, à 17:45

Bonjour
Je ne sais pas qu'elle était la taille de ta première partition de récupération
Je crains que tu n'ais pas ajouté 1 Go de plus à la taille indiquée à cause des arrondis.
Il est aussi possible que le boot-repair ait mémorisé une mauvaise valeur .

Pense à fournir un rapport smartcl par copier/coller du résultat de l'écran. C'est beaucoup plus facile à lire qu'une photo.

Tu devrais aussi faire un rapport smartcl de ton nouveau disque de 1 To au cas où il serait de mauvaise qualité.

Dernière modification par geole (Le 11/09/2020, à 17:45)

geole · Le 11/09/2020, à 17:49

pigrosol a écrit :

bon je ne comprends pas pourquoi mais hier ça a finit la récupération à 99,95%, il restait 225181kb de données a récupérer. et il m'a mis no space left, jsuis vert.
pourtant c'est bien un dde de 500go et la partition sda2 faisait 465go donc ça aurait fité ..
Les photos de la fin de l'opération de ddrescue sont dans le même dossier mega
https://mega.nz/folder/r4cQHCSA#kPU4QQ3a4Bh0SlORfVqNKg
j'y ai rajouté une photo du message qui arrive quand je tente de monter le dde sur lequel j'ia fait la récup.
# Mapfile. Created by GNU ddrescue version 1.23
# Command line: ddrescue -f -n -b512 /dev/sda2 /dev/sdc1 /home/ubuntu/log-recup/suivi
# Start time:   2020-09-10 21:40:22
# Current time: 2020-09-11 03:53:22
# Copying non-tried blocks... Pass 1 (forwards)
# current_pos  current_status  current_pass
0x7446D00000     ?               1
#      pos        size  status

0x7446D00000  0x09D00000  ?
qu'est-ce que je fais là du coup ?

Pour une lecture plus aisée

touch /home/ubuntu/log-recup/badblocs
sudo ddrescuelog -l- -b512 /home/ubuntu/log-recup/suivi> /home/ubuntu/log-recup/badblocs
cat /home/ubuntu/log-recup/badblocs

Si ta duplication est encore en ligne, tu peux tenter

sudo fsck -y /dev/sdc1

Dernière modification par geole (Le 11/09/2020, à 17:52)

pigrosol · Le 11/09/2020, à 18:10

geole a écrit :

Bonjour
Je ne sais pas qu'elle était la taille de ta première partition de récupération .

Bonjour !
la première partition du ddi (ddi pour dd interne pour référer au dd a recuperer) fait 537mo, elle contient le boot efi.
(dsl jai pas d'accents sur ce clavier, juste avec la correction orthographique)

geole a écrit :

Je crains que tu n'ais pas ajouté 1 Go de plus à la taille indiquée à cause des arrondis.

1go de plus ? hum je ne sais pas, et le dde que j'ai utilisé pour la première tentative de recup fait 499go pas 500 ..

geole a écrit :

Pense à fournir un rapport smartcl par copier/coller du résultat de l'écran. C'est beaucoup plus facile à lire qu'une photo.

je viens d'en refaire un en l'exportant direct dans un fichier texte, voici son contenu :

smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-42-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Hitachi/HGST Travelstar Z7K500
Device Model:     HGST HTS725050A7E630
Serial Number:    TF655BY92WW3ER
LU WWN Device Id: 5 000cca 76ce8dacc
Firmware Version: GH2ZB550
User Capacity:    500107862016 bytes [500 GB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Form Factor:      2.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 6
SATA Version is:  SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Fri Sep 11 15:58:33 2020 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(   45) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  95) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   093   093   062    Pre-fail  Always       -       1966080
  2 Throughput_Performance  0x0005   100   100   040    Pre-fail  Offline      -       0
  3 Spin_Up_Time            0x0007   253   253   033    Pre-fail  Always       -       1
  4 Start_Stop_Count        0x0012   099   099   000    Old_age   Always       -       2609
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   100   100   040    Pre-fail  Offline      -       0
  9 Power_On_Hours          0x0012   057   057   000    Old_age   Always       -       19000
 10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       2300
191 G-Sense_Error_Rate      0x000a   100   100   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       59375739
193 Load_Cycle_Count        0x0012   048   048   000    Old_age   Always       -       522966
194 Temperature_Celsius     0x0002   162   162   000    Old_age   Always       -       37 (Min/Max 11/56)
196 Reallocated_Event_Count 0x0032   089   089   000    Old_age   Always       -       454
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       144
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       197769
223 Load_Retry_Count        0x000a   100   100   000    Old_age   Always       -       0

SMART Error Log Version: 1
Warning: ATA error count 65535 inconsistent with error log pointer 4

ATA Error Count: 65535 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 65535 occurred at disk power-on lifetime: 18999 hours (791 days + 15 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 e0 2a 11 00  Error: UNC 8 sectors at LBA = 0x00112ae0 = 1125088

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 e0 2a 11 e0 08      02:30:11.863  READ DMA
  25 00 08 00 08 14 e0 08      02:30:11.858  READ DMA EXT
  25 00 08 f8 07 14 e0 08      02:30:11.837  READ DMA EXT
  c8 00 10 e0 2a 10 e0 08      02:30:11.828  READ DMA
  c8 00 c0 20 09 10 e0 08      02:30:11.827  READ DMA

Error 65534 occurred at disk power-on lifetime: 18998 hours (791 days + 14 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 e0 2a 11 00  Error: UNC 8 sectors at LBA = 0x00112ae0 = 1125088

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 e0 2a 11 e0 08      00:48:14.794  READ DMA
  e5 00 00 00 00 00 00 08      00:47:40.835  CHECK POWER MODE
  e5 00 00 00 00 00 00 08      00:47:35.835  CHECK POWER MODE
  e5 00 00 00 00 00 00 08      00:47:30.836  CHECK POWER MODE
  e5 00 00 00 00 00 00 08      00:47:25.833  CHECK POWER MODE

Error 65533 occurred at disk power-on lifetime: 18997 hours (791 days + 13 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 e0 2a 11 00  Error: UNC 8 sectors at LBA = 0x00112ae0 = 1125088

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 e0 2a 11 e0 08      00:38:34.532  READ DMA
  27 00 00 00 00 00 e0 08      00:38:34.531  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 a0 08      00:38:34.528  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 08      00:38:34.528  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 08      00:38:34.528  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]

Error 65532 occurred at disk power-on lifetime: 18997 hours (791 days + 13 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 e0 2a 11 00  Error: UNC 8 sectors at LBA = 0x00112ae0 = 1125088

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 e0 2a 11 e0 08      00:38:31.574  READ DMA
  e5 00 00 00 00 00 00 08      00:38:31.554  CHECK POWER MODE
  27 00 00 00 00 00 e0 08      00:38:31.553  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 a0 08      00:38:31.551  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 08      00:38:31.548  SET FEATURES [Set transfer mode]

Error 65531 occurred at disk power-on lifetime: 18997 hours (791 days + 13 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 e0 2a 11 00  Error: UNC 8 sectors at LBA = 0x00112ae0 = 1125088

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 e0 2a 11 e0 08      00:38:28.570  READ DMA
  e5 00 00 00 00 00 00 08      00:38:28.569  CHECK POWER MODE
  27 00 00 00 00 00 e0 08      00:38:28.569  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 a0 08      00:38:28.566  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 08      00:38:28.564  SET FEATURES [Set transfer mode]

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Vendor (0x50)       Completed without error       00%     18792         -
# 2  Short offline       Completed without error       00%     18792         -
# 3  Vendor (0x50)       Completed without error       00%     18782         -
# 4  Short offline       Completed: read failure       50%     18782         389832
# 5  Vendor (0x50)       Completed without error       00%     18782         -
# 6  Short offline       Completed: read failure       50%     18782         389832

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

geole a écrit :

Tu devrais aussi faire un rapport smartcl de ton nouveau disque de 1 To au cas où il serait de mauvaise qualité.

j'en ai fait un aussi, voici le rendu :

smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-42-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Mobile HDD
Device Model:     ST1000LM035-1RK172
Serial Number:    WDE5KNQ2
LU WWN Device Id: 5 000c50 0a882fad0
Firmware Version: RSM4
User Capacity:    1000204886016 bytes [1,00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      2.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-3 T13/2161-D revision 3b
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Fri Sep 11 15:59:06 2020 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART Status not supported: Incomplete response, ATA output registers missing
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.
See vendor-specific Attribute list for marginal Attributes.

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (  41)	The self-test routine was interrupted
					by the host with a hard or soft reset.
Total time to complete Offline 
data collection: 		(    0) seconds.
Offline data collection
capabilities: 			 (0x51) SMART execute Offline immediate.
					No Auto Offline data collection support.
					Suspend Offline collection upon new
					command.
					No Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 164) minutes.
SCT capabilities: 	       (0x303d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   051   046   006    Pre-fail  Always       -       158066759
  3 Spin_Up_Time            0x0023   099   099   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   099   099   000    Old_age   Always       -       1814
  5 Reallocated_Sector_Ct   0x0033   099   001   036    Pre-fail  Always   In_the_past 232
  7 Seek_Error_Rate         0x002f   077   060   045    Pre-fail  Always       -       8682247292
  9 Power_On_Hours          0x0032   099   099   000    Old_age   Always       -       1093 (69 88 0)
 10 Spin_Retry_Count        0x0033   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       1753
183 Runtime_Bad_Block       0x0032   099   099   000    Old_age   Always       -       1
184 End-to-End_Error        0x0033   100   100   097    Pre-fail  Always       -       0
187 Reported_Uncorrect      0x0032   078   078   000    Old_age   Always       -       22
188 Command_Timeout         0x0032   100   001   000    Old_age   Always       -       146047763500
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   067   055   040    Old_age   Always       -       33 (Min/Max 33/33)
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       320
192 Power-Off_Retract_Count 0x0022   100   100   000    Old_age   Always       -       124
193 Load_Cycle_Count        0x0032   096   096   000    Old_age   Always       -       9863
194 Temperature_Celsius     0x0022   033   045   000    Old_age   Always       -       33 (0 13 0 0 0)
196 Reallocated_Event_Count 0x0032   099   001   000    Old_age   Always       -       232
197 Current_Pending_Sector  0x0032   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
254 Free_Fall_Sensor        0x0032   100   100   000    Old_age   Always       -       0

SMART Error Log Version: 1
ATA Error Count: 23 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 23 occurred at disk power-on lifetime: 1093 hours (45 days + 13 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 ff ff ff 4f 00      01:20:10.735  READ FPDMA QUEUED
  60 00 08 ff ff ff 4f 00      01:20:10.735  READ FPDMA QUEUED
  60 00 08 ff ff ff 4f 00      01:20:10.735  READ FPDMA QUEUED
  60 00 08 ff ff ff 4f 00      01:20:10.735  READ FPDMA QUEUED
  60 00 08 ff ff ff 4f 00      01:20:10.734  READ FPDMA QUEUED

Error 22 occurred at disk power-on lifetime: 1027 hours (42 days + 19 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 71 01 01 05 18 40  Device Fault; Error: ABRT at LBA = 0x00180501 = 1574145

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 00 08 a0 23 9c 44 00      02:43:37.266  WRITE FPDMA QUEUED
  60 00 08 70 25 9f 44 00      02:43:37.264  READ FPDMA QUEUED
  ea 00 00 00 00 00 40 00      02:41:27.885  FLUSH CACHE EXT
  61 00 08 e0 ec 9b 44 00      02:41:27.240  WRITE FPDMA QUEUED
  60 00 08 68 25 9f 44 00      02:41:27.239  READ FPDMA QUEUED

Error 21 occurred at disk power-on lifetime: 1023 hours (42 days + 15 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 58 a5 d5 01  Error: UNC at LBA = 0x01d5a558 = 30778712

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 00 00 a5 d5 e1 00      00:53:25.396  READ DMA EXT
  00 00 00 00 00 00 00 04      00:53:25.238  NOP [Abort queued commands]
  25 00 00 00 b7 d4 e1 00      00:53:22.795  READ DMA EXT
  25 00 00 00 b6 d4 e1 00      00:53:22.778  READ DMA EXT
  25 00 00 00 b5 d4 e1 00      00:53:22.777  READ DMA EXT

Error 20 occurred at disk power-on lifetime: 1023 hours (42 days + 15 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 58 a5 d5 01  Error: UNC at LBA = 0x01d5a558 = 30778712

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 00 00 b7 d4 e1 00      00:53:22.795  READ DMA EXT
  25 00 00 00 b6 d4 e1 00      00:53:22.778  READ DMA EXT
  25 00 00 00 b5 d4 e1 00      00:53:22.777  READ DMA EXT
  25 00 00 00 b4 d4 e1 00      00:53:22.777  READ DMA EXT
  25 00 00 00 b3 d4 e1 00      00:53:22.776  READ DMA EXT

Error 19 occurred at disk power-on lifetime: 1023 hours (42 days + 15 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 98 57 ca 01  Error: UNC at LBA = 0x01ca5798 = 30037912

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 00 00 b9 c8 e1 00      00:53:15.724  READ DMA EXT
  25 00 00 00 b8 c8 e1 00      00:53:15.690  READ DMA EXT
  25 00 00 00 b7 c8 e1 00      00:53:15.689  READ DMA EXT
  25 00 00 00 b6 c8 e1 00      00:53:15.688  READ DMA EXT
  25 00 00 00 b5 c8 e1 00      00:53:15.688  READ DMA EXT

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Interrupted (host reset)      00%      1023         -
# 2  Short offline       Interrupted (host reset)      90%      1023         -
# 3  Short offline       Interrupted (host reset)      90%      1023         -
# 4  Short offline       Interrupted (host reset)      90%      1023         -
# 5  Short offline       Interrupted (host reset)      90%      1023         -
# 6  Short offline       Interrupted (host reset)      90%      1023         -
# 7  Short offline       Interrupted (host reset)      90%      1023         -
# 8  Short offline       Interrupted (host reset)      90%      1023         -
# 9  Short offline       Completed: unknown failure    90%      1023         0
#10  Short offline       Completed: unknown failure    90%      1023         0
#11  Short offline       Completed: unknown failure    90%      1022         0

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

geole · Le 11/09/2020, à 19:04

pigrosol a écrit :

la première partition du ddi (ddi pour dd interne pour référer au dd a récupérer) fait 537mo, elle contient le boot efi.
(dsl jai pas d'accents sur ce clavier, juste avec la correction orthographique)
1go de plus ? hum je ne sais pas, et le dde que j'ai utilisé pour la première tentative de recup fait 499go pas 500 ..

Je faisais référence à la partition que tu as du créer sur le disque de récupération.
Bien que le DDE fasse 500 Go, si tu n'as créé qu'une partition de 456 Go exactement alors la partition émetrice fait 465,49 Go, il en en manque un peu

....

Si c'est le disque interne qui lâche, il est en très mauvais état depuis probablement pas mal de temps.
Mais je crains que cela soit le disque que tu as utilisé pour récupérer. Il est quasiment fichu.

smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-42-generic] (local build)

=== START OF INFORMATION SECTION ===
Model Family:     Hitachi/HGST Travelstar Z7K500
Device Model:     HGST HTS725050A7E630
User Capacity:    500107862016 bytes [500 GB]
Sector Sizes:     512 bytes logical, 4096 bytes physical

ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  9 Power_On_Hours          0x0012   057   057   000    Old_age   Always       -       19000
196 Reallocated_Event_Count 0x0032   089   089   000    Old_age   Always       -       454
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       144

Error 65535 occurred at disk power-on lifetime: 18999 hours (791 days + 15 hours)   Error: UNC 8 sectors at LBA = 1125088

Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error      -
# 4  Short offline       Completed: read failure       50%     18782         389832   -
# 6  Short offline       Completed: read failure       50%     18782         389832

Pour le nouveau disque externe , On fera avec mais il a des faiblesses.
Malgré son très jeune âge (1093 heures) il a déjà 232 secteurs qui sont fichus. Heureusement il a pensé à les remplacer
et il a de la réserve (Pas loin de 23200)
Mais son taux d'efficacité d'accès (compteur 1) n'est que de 51%

smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-42-generic] (local build)
=== START OF INFORMATION SECTION ===
Model Family:     Seagate Mobile HDD
Device Model:     ST1000LM035-1RK172
User Capacity:    1000204886016 bytes [1,00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical

ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   051   046   006    Pre-fail  Always       -       
  5 Reallocated_Sector_Ct   0x0033   099   001   036    Pre-fail  Always   In_the_past 232
  7 Seek_Error_Rate         0x002f   077   060   045    Pre-fail  Always       -       
  9 Power_On_Hours          0x0032   099   099   000    Old_age   Always       -       1093 (69 88 0)
183 Runtime_Bad_Block       0x0032   099   099   000    Old_age   Always       -       1
196 Reallocated_Event_Count 0x0032   099   001   000    Old_age   Always       -       232
197 Current_Pending_Sector  0x0032   100   100   000    Old_age   Always       -       0

Error 23 occurred at disk power-on lifetime: 1093 hours (45 days + 13 hours)   Error: UNC at LBA = 268435455

pigrosol · Le 11/09/2020, à 20:31

geole a écrit :

pigrosol a écrit :
la première partition du ddi (ddi pour dd interne pour référer au dd a récupérer) fait 537mo, elle contient le boot efi.
(dsl jai pas d'accents sur ce clavier, juste avec la correction orthographique)
1go de plus ? hum je ne sais pas, et le dde que j'ai utilisé pour la première tentative de recup fait 499go pas 500 ..
Je faisais référence à la partition que tu as du créer sur le disque de récupération.
Bien que le DDE fasse 500 Go, si tu n'as créé qu'une partition de 456 Go exactement alors la partition émetrice fait 465,49 Go, il en en manque un peu
....
Si c'est le disque interne qui lâche, il est en très mauvais état depuis probablement pas mal de temps.
Mais je crains que cela soit le disque que tu as utilisé pour récupérer. Il est quasiment fichu.
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-42-generic] (local build)

=== START OF INFORMATION SECTION ===
Model Family:     Hitachi/HGST Travelstar Z7K500
Device Model:     HGST HTS725050A7E630
User Capacity:    500107862016 bytes [500 GB]
Sector Sizes:     512 bytes logical, 4096 bytes physical

ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  9 Power_On_Hours          0x0012   057   057   000    Old_age   Always       -       19000
196 Reallocated_Event_Count 0x0032   089   089   000    Old_age   Always       -       454
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       144

Error 65535 occurred at disk power-on lifetime: 18999 hours (791 days + 15 hours)   Error: UNC 8 sectors at LBA = 1125088

Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error      -
# 4  Short offline       Completed: read failure       50%     18782         389832   -
# 6  Short offline       Completed: read failure       50%     18782         389832

Ce smartctl est pour le ddi de 500go, celui dont je cherche a récupérer les données ...
si il est en mauvais état je verrais soit pour acheter un nouveau soit en mettre un autre.

geole a écrit :

Pour le nouveau disque externe , On fera avec mais il a des faiblesses.
Malgré son très jeune âge (1093 heures) il a déjà 232 secteurs qui sont fichus. Heureusement il a pensé à les remplacer
et il a de la réserve (Pas loin de 23200)
Mais son taux d'efficacité d'accès (compteur 1) n'est que de 51%

du coup ça risque de prendre plus de temps je suppose

je viens de faire un smartctl sur le dde de 499go que j'ai utilisé pour faire la tentative de recupération, voici le rendu :

smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-42-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Elements / My Passport (USB)
Device Model:     WDC WD5000BMVV-11A1CS0
Serial Number:    WD-WX40A8911612
LU WWN Device Id: 5 0014ee 2adf8f442
Firmware Version: 01.01A01
User Capacity:    500107862016 bytes [500 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    5400 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS (minor revision not indicated)
SATA Version is:  SATA 2.6, 3.0 Gb/s
Local Time is:    Fri Sep 11 18:05:22 2020 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(13560) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 158) minutes.
Conveyance self-test routine
recommended polling time: 	 (   5) minutes.
SCT capabilities: 	       (0x7037)	SCT Status supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0027   198   189   021    Pre-fail  Always       -       3100
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       838
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       473
 10 Spin_Retry_Count        0x0033   100   100   051    Pre-fail  Always       -       0
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       395
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       95
193 Load_Cycle_Count        0x0032   199   199   000    Old_age   Always       -       4640
194 Temperature_Celsius     0x0022   126   103   000    Old_age   Always       -       21
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   100   253   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0009   100   253   051    Pre-fail  Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

geole · Le 11/09/2020, à 21:13

pigrosol a écrit :

je viens de faire un smartctl sur le dde de 499go que j'ai utilisé pour faire la tentative de recupération, voici le rendu :

smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-42-generic] (local build)
=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Elements / My Passport (USB)
Device Model:     WDC WD5000BMVV-11A1CS0

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       473
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   100   253   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0009   100   253   051    Pre-fail  Offline      -       0

SMART Error Log Version: 1
No Errors Logged

Ce disque est en très bon état. c'était donc le disque récepteur de la duplication, si j'ai bien compris

J'en déduis que le disque émetteur était donc le premier C'est à dire celui qui a des secteurs physiques de 4096 et pas de 512!
Si , tu dois repartir de zéro

ddrescue -f -n -b4096 /dev/sda2 /dev/sdc1 /home/ubuntu/log-recup/suivi4096

Dernière modification par geole (Le 11/09/2020, à 21:16)

pigrosol · Le 11/09/2020, à 21:49

ok je viens de formater rapidement le dde 499go récepteur de la récup et de lancer la commande ddrescue.

j'aurais peut-être du utiliser directement le dde de 1to .. j’espère qu'il va pas me dire qu'il manque d'espace

Dernière modification par pigrosol (Le 11/09/2020, à 21:51)

pigrosol · Le 12/09/2020, à 04:12

bon snif même topo, manque d'espace a 7 secondes de la fin

je relance avec le dde 1to et je vais dodo

geole · Le 12/09/2020, à 08:01

Bonjour
Assez incompréhensible.

Si le problème persiste , il faudra que tu copies le disque entier dans un autre disque qui n'aura pas besoin d'être formaté.

ddrescue -f -n -b4096 /dev/sda    /dev/sdc   /home/ubuntu/log-recup/suividisk

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 07/09/2020, à 17:20

[Résolu] Récupération de données EXT4 / accès système ou réinstall

#2 Le 07/09/2020, à 19:55

Re : [Résolu] Récupération de données EXT4 / accès système ou réinstall

#3 Le 09/09/2020, à 23:48

Re : [Résolu] Récupération de données EXT4 / accès système ou réinstall

#4 Le 10/09/2020, à 12:35

Re : [Résolu] Récupération de données EXT4 / accès système ou réinstall

#5 Le 10/09/2020, à 12:38

Re : [Résolu] Récupération de données EXT4 / accès système ou réinstall

#6 Le 10/09/2020, à 23:48

Re : [Résolu] Récupération de données EXT4 / accès système ou réinstall

#7 Le 11/09/2020, à 00:17

Re : [Résolu] Récupération de données EXT4 / accès système ou réinstall

#8 Le 11/09/2020, à 00:43

Re : [Résolu] Récupération de données EXT4 / accès système ou réinstall

#9 Le 11/09/2020, à 00:55

Re : [Résolu] Récupération de données EXT4 / accès système ou réinstall

#10 Le 11/09/2020, à 00:56

Re : [Résolu] Récupération de données EXT4 / accès système ou réinstall

#11 Le 11/09/2020, à 00:59

Re : [Résolu] Récupération de données EXT4 / accès système ou réinstall

#12 Le 11/09/2020, à 01:05

Re : [Résolu] Récupération de données EXT4 / accès système ou réinstall

#13 Le 11/09/2020, à 01:14

Re : [Résolu] Récupération de données EXT4 / accès système ou réinstall

#14 Le 11/09/2020, à 15:37

Re : [Résolu] Récupération de données EXT4 / accès système ou réinstall

#15 Le 11/09/2020, à 16:00

Re : [Résolu] Récupération de données EXT4 / accès système ou réinstall

#16 Le 11/09/2020, à 16:48

Re : [Résolu] Récupération de données EXT4 / accès système ou réinstall

#17 Le 11/09/2020, à 17:45

Re : [Résolu] Récupération de données EXT4 / accès système ou réinstall

#18 Le 11/09/2020, à 17:49

Re : [Résolu] Récupération de données EXT4 / accès système ou réinstall

#19 Le 11/09/2020, à 18:10

Re : [Résolu] Récupération de données EXT4 / accès système ou réinstall

#20 Le 11/09/2020, à 19:04

Re : [Résolu] Récupération de données EXT4 / accès système ou réinstall

#21 Le 11/09/2020, à 20:31

Re : [Résolu] Récupération de données EXT4 / accès système ou réinstall

#22 Le 11/09/2020, à 21:13

Re : [Résolu] Récupération de données EXT4 / accès système ou réinstall

#23 Le 11/09/2020, à 21:49

Re : [Résolu] Récupération de données EXT4 / accès système ou réinstall

#24 Le 12/09/2020, à 04:12

Re : [Résolu] Récupération de données EXT4 / accès système ou réinstall

#25 Le 12/09/2020, à 08:01

Re : [Résolu] Récupération de données EXT4 / accès système ou réinstall

Pied de page des forums