Contenu | Rechercher | Menus

Annonce

DVD, clés USB et t-shirts Ubuntu-fr disponibles sur la boutique En Vente Libre

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#26 Le 16/09/2020, à 09:07

NicoApi73

Re : Dysfontionnement adaptateur D Link DWA 131 - 16.04 > 18.04 [Résolu]

Bonjour,

Ton driver est bien installé. Soit il prend mal en charge spécifiquement cette clé (peu probable), soit le problème est ailleurs.

Il va falloir regarder ce que remonte le noyau. Dans un premier temps, pour voir s'il y a des erreurs spécifiques, donne STP le retour de :

dmesg -lerr

Ensuite (et là ça va être long), redémarre avec ta clé, attends le temps qu'il faut et donne le retour (qui sera très long) de :

dmesg

Avec ça, nous devrions pouvoir voir là où bloque

Hors ligne

#27 Le 16/09/2020, à 09:21

bilem

Re : Dysfontionnement adaptateur D Link DWA 131 - 16.04 > 18.04 [Résolu]

Le redémarrage a pris aussi 5 minutes exactement.
Voilà:

[    0.000000] microcode: microcode updated early to revision 0x2f, date = 2019-02-17
[    0.000000] Linux version 4.15.0-117-generic (buildd@lcy01-amd64-008) (gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04)) #118-Ubuntu SMP Fri Sep 4 20:02:41 UTC 2020 (Ubuntu 4.15.0-117.118-generic 4.15.18)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-117-generic root=UUID=e7009587-8685-412b-99bd-8d1ca753a84a ro quiet splash vt.handoff=1
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dd906fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dd907000-0x00000000ddb15fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ddb16000-0x00000000ddc2dfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000ddc2e000-0x00000000dedd8fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dedd9000-0x00000000dedd9fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dedda000-0x00000000dee1cfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000dee1d000-0x00000000df232fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000df233000-0x00000000df7f3fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000df7f4000-0x00000000df7fffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: MSI MS-7756/H77MA-G43 (MS-7756), BIOS V1.6 06/19/2012
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x21f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-D3FFF write-protect
[    0.000000]   D4000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask E00000000 write-back
[    0.000000]   1 base 200000000 mask FF0000000 write-back
[    0.000000]   2 base 210000000 mask FF8000000 write-back
[    0.000000]   3 base 218000000 mask FFC000000 write-back
[    0.000000]   4 base 21C000000 mask FFE000000 write-back
[    0.000000]   5 base 21E000000 mask FFF000000 write-back
[    0.000000]   6 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] total RAM covered: 8176M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K 	chunk_size: 32M 	num_reg: 6  	lose cover RAM: 0G
[    0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xdf800 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fd770-0x000fd77f]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] RAMDISK: [mem 0x334ad000-0x35a4dfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000DDC1F070 000064 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000DDC28ED8 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000DDC1F170 009D63 (v02 ALASKA A M I    00000021 INTL 20051117)
[    0.000000] ACPI: FACS 0x00000000DDC2C080 000040
[    0.000000] ACPI: APIC 0x00000000DDC28FE8 000072 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000DDC29060 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x00000000DDC290A8 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000DDC290E8 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000DDC29120 0004E9 (v01 IdeRef IdeTable 00001000 INTL 20091112)
[    0.000000] ACPI: SSDT 0x00000000DDC29610 0009AA (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 0x00000000DDC29FC0 000A92 (v01 PmRef  CpuPm    00003000 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000021effffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x21efd0000-0x21effafff]
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000021effffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000dd906fff]
[    0.000000]   node   0: [mem 0x00000000dedd9000-0x00000000dedd9fff]
[    0.000000]   node   0: [mem 0x00000000dee1d000-0x00000000df232fff]
[    0.000000]   node   0: [mem 0x00000000df7f4000-0x00000000df7fffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000021effffff]
[    0.000000] Reserved but unavailable: 99 pages
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021effffff]
[    0.000000] On node 0 totalpages: 2084039
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14133 pages used for memmap
[    0.000000]   DMA32 zone: 904490 pages, LIFO batch:31
[    0.000000]   Normal zone: 18368 pages used for memmap
[    0.000000]   Normal zone: 1175552 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] TSC deadline timer available
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdd907000-0xddb15fff]
[    0.000000] PM: Registered nosave memory: [mem 0xddb16000-0xddc2dfff]
[    0.000000] PM: Registered nosave memory: [mem 0xddc2e000-0xdedd8fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdedda000-0xdee1cfff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf233000-0xdf7f3fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf800000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xdf800000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x99/0x500 with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 45 pages/cpu s147456 r8192 d28672 u524288
[    0.000000] pcpu-alloc: s147456 r8192 d28672 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 2051453
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-117-generic root=UUID=e7009587-8685-412b-99bd-8d1ca753a84a ro quiet splash vt.handoff=1
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 8071248K/8336156K available (12300K kernel code, 2481K rwdata, 4272K rodata, 2436K init, 2724K bss, 264908K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 39392 entries in 154 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
[    0.000000] vt handoff: transparent VT on vt#1
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20170831
[    0.000000] ACPI: 4 ACPI AML tables successfully acquired and loaded
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.020000] tsc: Fast TSC calibration using PIT
[    0.024000] tsc: Detected 3100.019 MHz processor
[    0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6200.03 BogoMIPS (lpj=12400076)
[    0.024000] pid_max: default: 32768 minimum: 301
[    0.024000] Security Framework initialized
[    0.024000] Yama: becoming mindful.
[    0.024000] AppArmor: AppArmor initialized
[    0.028140] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.028722] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.028757] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.028775] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.028959] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.028959] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.028970] CPU0: Thermal monitoring enabled (TM1)
[    0.028977] process: using mwait in idle threads
[    0.028979] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.028980] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.028981] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.028983] Spectre V2 : Mitigation: Full generic retpoline
[    0.028983] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.028984] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.028992] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.028992] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[    0.028993] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.029016] MDS: Mitigation: Clear CPU buffers
[    0.029168] Freeing SMP alternatives memory: 36K
[    0.032066] smpboot: CPU0: Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[    0.032129] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.032148] ... version:                3
[    0.032148] ... bit width:              48
[    0.032149] ... generic registers:      4
[    0.032149] ... value mask:             0000ffffffffffff
[    0.032150] ... max period:             00007fffffffffff
[    0.032150] ... fixed-purpose events:   3
[    0.032151] ... event mask:             000000070000000f
[    0.032183] Hierarchical SRCU implementation.
[    0.032939] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.032953] smp: Bringing up secondary CPUs ...
[    0.033029] x86: Booting SMP configuration:
[    0.033030] .... node  #0, CPUs:      #1 #2
[    0.038351] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[    0.038351]  #3
[    0.040021] smp: Brought up 1 node, 4 CPUs
[    0.040021] smpboot: Max logical packages: 1
[    0.040021] smpboot: Total of 4 processors activated (24800.15 BogoMIPS)
[    0.042506] devtmpfs: initialized
[    0.042506] x86/mm: Memory block size: 128MB
[    0.042506] evm: security.selinux
[    0.042506] evm: security.SMACK64
[    0.042506] evm: security.SMACK64EXEC
[    0.042506] evm: security.SMACK64TRANSMUTE
[    0.042506] evm: security.SMACK64MMAP
[    0.042506] evm: security.apparmor
[    0.042506] evm: security.ima
[    0.042506] evm: security.capability
[    0.042506] PM: Registering ACPI NVS region [mem 0xddb16000-0xddc2dfff] (1146880 bytes)
[    0.042506] PM: Registering ACPI NVS region [mem 0xdedda000-0xdee1cfff] (274432 bytes)
[    0.042557] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.042557] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.042557] pinctrl core: initialized pinctrl subsystem
[    0.042557] RTC time:  7:12:12, date: 09/16/20
[    0.042557] NET: Registered protocol family 16
[    0.042557] audit: initializing netlink subsys (disabled)
[    0.042557] audit: type=2000 audit(1600240332.040:1): state=initialized audit_enabled=0 res=1
[    0.044035] cpuidle: using governor ladder
[    0.044035] cpuidle: using governor menu
[    0.044040] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.044041] ACPI: bus type PCI registered
[    0.044042] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.044089] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.044091] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.044099] PCI: Using configuration type 1 for base access
[    0.044126] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.044995] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.044995] ACPI: Added _OSI(Module Device)
[    0.044995] ACPI: Added _OSI(Processor Device)
[    0.044995] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.044995] ACPI: Added _OSI(Processor Aggregator Device)
[    0.044995] ACPI: Added _OSI(Linux-Dell-Video)
[    0.044995] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.044995] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.044995] ACPI: Executed 1 blocks of module-level executable AML code
[    0.048548] ACPI: Dynamic OEM Table Load:
[    0.048553] ACPI: SSDT 0xFFFF9484153D7000 00083B (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.048692] ACPI: Dynamic OEM Table Load:
[    0.048692] ACPI: SSDT 0xFFFF948414C3EC00 000303 (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.048694] ACPI: Dynamic OEM Table Load:
[    0.048694] ACPI: SSDT 0xFFFF948414D01E00 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.049049] ACPI: Interpreter enabled
[    0.049067] ACPI: (supports S0 S3 S4 S5)
[    0.049068] ACPI: Using IOAPIC for interrupt routing
[    0.049094] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.049447] ACPI: Enabled 15 GPEs in block 00 to 3F
[    0.058513] ACPI: Power Resource [FN00] (off)
[    0.058596] ACPI: Power Resource [FN01] (off)
[    0.058678] ACPI: Power Resource [FN02] (off)
[    0.058757] ACPI: Power Resource [FN03] (off)
[    0.058836] ACPI: Power Resource [FN04] (off)
[    0.059490] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.059495] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.059785] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[    0.059973] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[    0.059974] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.060542] PCI host bridge to bus 0000:00
[    0.060544] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.060545] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.060546] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.060547] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.060548] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.060549] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.060550] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.060550] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.060551] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
[    0.060552] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.060559] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
[    0.060652] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[    0.060682] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.060784] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    0.060807] pci 0000:00:14.0: reg 0x10: [mem 0xf7f00000-0xf7f0ffff 64bit]
[    0.060871] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.060953] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.060976] pci 0000:00:16.0: reg 0x10: [mem 0xf7f19000-0xf7f1900f 64bit]
[    0.061046] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.061133] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.061153] pci 0000:00:1a.0: reg 0x10: [mem 0xf7f17000-0xf7f173ff]
[    0.061232] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.061313] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.061333] pci 0000:00:1b.0: reg 0x10: [mem 0xf7f10000-0xf7f13fff 64bit]
[    0.061402] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.061487] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.061565] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.061653] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[    0.061730] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.061821] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.061841] pci 0000:00:1d.0: reg 0x10: [mem 0xf7f16000-0xf7f163ff]
[    0.061919] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.062000] pci 0000:00:1f.0: [8086:1e4a] type 00 class 0x060100
[    0.062174] pci 0000:00:1f.2: [8086:1e00] type 00 class 0x01018f
[    0.062189] pci 0000:00:1f.2: reg 0x10: [io  0xf0d0-0xf0d7]
[    0.062195] pci 0000:00:1f.2: reg 0x14: [io  0xf0c0-0xf0c3]
[    0.062201] pci 0000:00:1f.2: reg 0x18: [io  0xf0b0-0xf0b7]
[    0.062207] pci 0000:00:1f.2: reg 0x1c: [io  0xf0a0-0xf0a3]
[    0.062214] pci 0000:00:1f.2: reg 0x20: [io  0xf090-0xf09f]
[    0.062220] pci 0000:00:1f.2: reg 0x24: [io  0xf080-0xf08f]
[    0.062317] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.062334] pci 0000:00:1f.3: reg 0x10: [mem 0xf7f15000-0xf7f150ff 64bit]
[    0.062352] pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
[    0.062442] pci 0000:00:1f.5: [8086:1e08] type 00 class 0x010185
[    0.062457] pci 0000:00:1f.5: reg 0x10: [io  0xf070-0xf077]
[    0.062463] pci 0000:00:1f.5: reg 0x14: [io  0xf060-0xf063]
[    0.062469] pci 0000:00:1f.5: reg 0x18: [io  0xf050-0xf057]
[    0.062475] pci 0000:00:1f.5: reg 0x1c: [io  0xf040-0xf043]
[    0.062481] pci 0000:00:1f.5: reg 0x20: [io  0xf030-0xf03f]
[    0.062488] pci 0000:00:1f.5: reg 0x24: [io  0xf020-0xf02f]
[    0.062617] pci 0000:01:00.0: [1002:683f] type 00 class 0x030000
[    0.062632] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.062639] pci 0000:01:00.0: reg 0x18: [mem 0xf7e00000-0xf7e3ffff 64bit]
[    0.062644] pci 0000:01:00.0: reg 0x20: [io  0xe000-0xe0ff]
[    0.062652] pci 0000:01:00.0: reg 0x30: [mem 0xf7e40000-0xf7e5ffff pref]
[    0.062657] pci 0000:01:00.0: enabling Extended Tags
[    0.062688] pci 0000:01:00.0: supports D1 D2
[    0.062689] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
[    0.062728] pci 0000:01:00.1: [1002:aab0] type 00 class 0x040300
[    0.062742] pci 0000:01:00.1: reg 0x10: [mem 0xf7e60000-0xf7e63fff 64bit]
[    0.062765] pci 0000:01:00.1: enabling Extended Tags
[    0.062795] pci 0000:01:00.1: supports D1 D2
[    0.076018] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.076021] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.076024] pci 0000:00:01.0:   bridge window [mem 0xf7e00000-0xf7efffff]
[    0.076028] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.076089] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.076159] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    0.076192] pci 0000:03:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.076224] pci 0000:03:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
[    0.076243] pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[    0.076361] pci 0000:03:00.0: supports D1 D2
[    0.076362] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.088027] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.088031] pci 0000:00:1c.1:   bridge window [io  0xd000-0xdfff]
[    0.088040] pci 0000:00:1c.1:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.088739] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.088804] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.088867] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.088929] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.088995] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.089057] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.089119] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.089181] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.092003] SCSI subsystem initialized
[    0.092017] libata version 3.00 loaded.
[    0.092022] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.092022] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.092022] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.092022] vgaarb: loaded
[    0.092023] ACPI: bus type USB registered
[    0.092035] usbcore: registered new interface driver usbfs
[    0.092040] usbcore: registered new interface driver hub
[    0.092051] usbcore: registered new device driver usb
[    0.092078] EDAC MC: Ver: 3.0.0
[    0.092078] PCI: Using ACPI for IRQ routing
[    0.093480] PCI: pci_cache_line_size set to 64 bytes
[    0.093516] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[    0.093517] e820: reserve RAM buffer [mem 0xdd907000-0xdfffffff]
[    0.093518] e820: reserve RAM buffer [mem 0xdedda000-0xdfffffff]
[    0.093519] e820: reserve RAM buffer [mem 0xdf233000-0xdfffffff]
[    0.093520] e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff]
[    0.093520] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
[    0.093520] NetLabel: Initializing
[    0.093520] NetLabel:  domain hash size = 128
[    0.093520] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.093520] NetLabel:  unlabeled traffic allowed by default
[    0.093520] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.093520] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.096018] clocksource: Switched to clocksource hpet
[    0.104864] VFS: Disk quotas dquot_6.6.0
[    0.104879] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.104962] AppArmor: AppArmor Filesystem Enabled
[    0.104987] pnp: PnP ACPI init
[    0.105101] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.105106] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.105190] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.105192] system 00:01: [io  0x1000-0x100f] has been reserved
[    0.105193] system 00:01: [io  0xffff] has been reserved
[    0.105194] system 00:01: [io  0xffff] has been reserved
[    0.105195] system 00:01: [io  0x0400-0x0453] has been reserved
[    0.105196] system 00:01: [io  0x0458-0x047f] has been reserved
[    0.105197] system 00:01: [io  0x0500-0x057f] has been reserved
[    0.105198] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.105201] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.105223] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.105272] system 00:03: [io  0x0454-0x0457] has been reserved
[    0.105276] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.105427] system 00:04: [io  0x0a00-0x0a1f] has been reserved
[    0.105428] system 00:04: [io  0x0a30-0x0a3f] has been reserved
[    0.105431] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.105685] pnp 00:05: [dma 0 disabled]
[    0.105725] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.105777] system 00:06: [io  0x04d0-0x04d1] has been reserved
[    0.105780] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.106071] pnp 00:07: [dma 3]
[    0.106173] pnp 00:07: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.106427] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.106429] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.106430] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.106431] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.106432] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.106433] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.106434] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.106435] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.106436] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[    0.106438] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.106439] system 00:08: [mem 0xf0100000-0xf0100fff] has been reserved
[    0.106442] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.106600] pnp: PnP ACPI: found 9 devices
[    0.112462] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.112486] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.112488] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.112490] pci 0000:00:01.0:   bridge window [mem 0xf7e00000-0xf7efffff]
[    0.112492] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.112494] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.112504] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.112505] pci 0000:00:1c.1:   bridge window [io  0xd000-0xdfff]
[    0.112511] pci 0000:00:1c.1:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.112516] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.112517] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.112518] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.112519] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff window]
[    0.112520] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff window]
[    0.112521] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff window]
[    0.112522] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000e3fff window]
[    0.112523] pci_bus 0000:00: resource 11 [mem 0x000e4000-0x000e7fff window]
[    0.112524] pci_bus 0000:00: resource 12 [mem 0xe0000000-0xfeafffff window]
[    0.112525] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.112526] pci_bus 0000:01: resource 1 [mem 0xf7e00000-0xf7efffff]
[    0.112527] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[    0.112528] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.112529] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.112626] NET: Registered protocol family 2
[    0.112753] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.112854] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.112966] TCP: Hash tables configured (established 65536 bind 65536)
[    0.112999] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.113021] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.113069] NET: Registered protocol family 1
[    0.113580] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.113586] pci 0000:01:00.1: Linked as a consumer to 0000:01:00.0
[    0.113587] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[    0.113597] PCI: CLS mismatch (64 != 32), using 64 bytes
[    0.113662] Unpacking initramfs...
[    0.536901] Freeing initrd memory: 38532K
[    0.536959] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.536960] software IO TLB: mapped [mem 0xd9907000-0xdd907000] (64MB)
[    0.537191] Scanning for low memory corruption every 60 seconds
[    0.537734] Initialise system trusted keyrings
[    0.537744] Key type blacklist registered
[    0.537779] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    0.538659] zbud: loaded
[    0.539052] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.539155] fuse init (API version 7.26)
[    0.540455] Key type asymmetric registered
[    0.540456] Asymmetric key parser 'x509' registered
[    0.540491] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    0.540524] io scheduler noop registered
[    0.540524] io scheduler deadline registered
[    0.540544] io scheduler cfq registered (default)
[    0.541086] vesafb: mode is 1920x1200x32, linelength=7680, pages=0
[    0.541086] vesafb: scrolling: redraw
[    0.541087] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    0.541099] vesafb: framebuffer at 0xe0000000, mapped to 0x        (ptrval), using 9024k, total 9024k
[    0.541186] Console: switching to colour frame buffer device 240x75
[    0.541213] fb0: VESA VGA frame buffer device
[    0.541223] intel_idle: MWAIT substates: 0x1120
[    0.541224] intel_idle: v0.4.1 model 0x2A
[    0.541328] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.541421] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.541446] ACPI: Power Button [PWRB]
[    0.541480] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.541496] ACPI: Power Button [PWRF]
[    0.542108] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    0.542191] thermal LNXTHERM:00: registered as thermal_zone0
[    0.542192] ACPI: Thermal Zone [TZ00] (28 C)
[    0.542467] thermal LNXTHERM:01: registered as thermal_zone1
[    0.542468] ACPI: Thermal Zone [TZ01] (30 C)
[    0.542586] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.563074] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.564829] Linux agpgart interface v0.103
[    0.565980] loop: module loaded
[    0.566069] ata_piix 0000:00:1f.2: version 2.13
[    0.566172] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    0.566514] scsi host0: ata_piix
[    0.566597] scsi host1: ata_piix
[    0.566626] ata1: SATA max UDMA/133 cmd 0xf0d0 ctl 0xf0c0 bmdma 0xf090 irq 19
[    0.566629] ata2: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf098 irq 19
[    0.566724] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    0.724058] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
[    0.724454] scsi host2: ata_piix
[    0.724616] scsi host3: ata_piix
[    0.724652] ata3: SATA max UDMA/133 cmd 0xf070 ctl 0xf060 bmdma 0xf030 irq 19
[    0.724653] ata4: SATA max UDMA/133 cmd 0xf050 ctl 0xf040 bmdma 0xf038 irq 19
[    0.724720] libphy: Fixed MDIO Bus: probed
[    0.724722] tun: Universal TUN/TAP device driver, 1.6
[    0.724839] PPP generic driver version 2.4.2
[    0.724899] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.724903] ehci-pci: EHCI PCI platform driver
[    0.725013] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.725019] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.725031] ehci-pci 0000:00:1a.0: debug port 2
[    0.728940] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.728948] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7f17000
[    0.744024] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.744076] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.744077] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.744078] usb usb1: Product: EHCI Host Controller
[    0.744079] usb usb1: Manufacturer: Linux 4.15.0-117-generic ehci_hcd
[    0.744080] usb usb1: SerialNumber: 0000:00:1a.0
[    0.744171] hub 1-0:1.0: USB hub found
[    0.744176] hub 1-0:1.0: 2 ports detected
[    0.744378] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.744381] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.744390] ehci-pci 0000:00:1d.0: debug port 2
[    0.748288] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.748297] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7f16000
[    0.764014] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.764043] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.764044] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.764045] usb usb2: Product: EHCI Host Controller
[    0.764046] usb usb2: Manufacturer: Linux 4.15.0-117-generic ehci_hcd
[    0.764047] usb usb2: SerialNumber: 0000:00:1d.0
[    0.764124] hub 2-0:1.0: USB hub found
[    0.764128] hub 2-0:1.0: 2 ports detected
[    0.764235] ehci-platform: EHCI generic platform driver
[    0.764243] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.764245] ohci-pci: OHCI PCI platform driver
[    0.764251] ohci-platform: OHCI generic platform driver
[    0.764257] uhci_hcd: USB Universal Host Controller Interface driver
[    0.764357] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.764361] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    0.765434] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x000000000000b930
[    0.765437] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.765543] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.765545] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.765545] usb usb3: Product: xHCI Host Controller
[    0.765546] usb usb3: Manufacturer: Linux 4.15.0-117-generic xhci-hcd
[    0.765547] usb usb3: SerialNumber: 0000:00:14.0
[    0.765623] hub 3-0:1.0: USB hub found
[    0.765630] hub 3-0:1.0: 4 ports detected
[    0.765954] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.765957] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    0.765959] xhci_hcd 0000:00:14.0: Host supports USB 3.0  SuperSpeed
[    0.765984] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.765986] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.765986] usb usb4: Product: xHCI Host Controller
[    0.765987] usb usb4: Manufacturer: Linux 4.15.0-117-generic xhci-hcd
[    0.765988] usb usb4: SerialNumber: 0000:00:14.0
[    0.766061] hub 4-0:1.0: USB hub found
[    0.766069] hub 4-0:1.0: 4 ports detected
[    0.766418] i8042: PNP: No PS/2 controller found.
[    0.766473] mousedev: PS/2 mouse device common for all mice
[    0.766587] rtc_cmos 00:02: RTC can wake from S4
[    0.766701] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.766724] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.766730] i2c /dev entries driver
[    0.766768] device-mapper: uevent: version 1.0.3
[    0.766817] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    0.766822] intel_pstate: Intel P-state driver initializing
[    0.767054] ledtrig-cpu: registered to indicate activity on CPUs
[    0.767375] NET: Registered protocol family 10
[    0.770864] Segment Routing with IPv6
[    0.770884] NET: Registered protocol family 17
[    0.770917] Key type dns_resolver registered
[    0.771102] mce: Using 7 MCE banks
[    0.771111] RAS: Correctable Errors collector initialized.
[    0.771138] microcode: sig=0x206a7, pf=0x2, revision=0x2f
[    0.771284] microcode: Microcode Update Driver: v2.2.
[    0.771292] sched_clock: Marking stable (771279796, 0)->(758040787, 13239009)
[    0.771446] registered taskstats version 1
[    0.771456] Loading compiled-in X.509 certificates
[    0.773740] Loaded X.509 cert 'Build time autogenerated kernel key: 993aedfcb7091aab7364eeb95e85a8dab512d887'
[    0.773761] zswap: loaded using pool lzo/zbud
[    0.776699] Key type big_key registered
[    0.776702] Key type trusted registered
[    0.778127] Key type encrypted registered
[    0.778129] AppArmor: AppArmor sha1 policy hashing enabled
[    0.778132] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    0.778136] ima: Allocated hash algorithm: sha1
[    0.778149] evm: HMAC attrs: 0x1
[    0.778352]   Magic number: 4:130:218
[    0.778401] acpi device:3c: hash matches
[    0.778463] rtc_cmos 00:02: setting system clock to 2020-09-16 07:12:13 UTC (1600240333)
[    0.778508] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.778509] EDD information not available.
[    1.080051] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.100052] usb 3-3: new high-speed USB device number 2 using xhci_hcd
[    1.100063] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.236451] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.236453] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.236733] hub 1-1:1.0: USB hub found
[    1.236911] hub 1-1:1.0: 6 ports detected
[    1.248231] usb 3-3: New USB device found, idVendor=0424, idProduct=2514
[    1.248232] usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.248533] hub 3-3:1.0: USB hub found
[    1.248593] hub 3-3:1.0: 4 ports detected
[    1.256418] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.256421] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.256729] hub 2-1:1.0: USB hub found
[    1.256914] hub 2-1:1.0: 8 ports detected
[    1.348080] ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
[    1.348092] ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 330)
[    1.348234] ata2.00: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
[    1.348246] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 330)
[    1.353394] ata1.00: supports DRM functions and may not be fully accessible
[    1.353396] ata1.00: ATA-9: Samsung SSD 850 EVO 120GB, EMT01B6Q, max UDMA/133
[    1.353397] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 0/32)
[    1.353569] ata2.00: ATA-8: ST31000524AS, JC4B, max UDMA/133
[    1.353570] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.353729] ata2.01: ATA-9: SAMSUNG SSD 830 Series, CXM03B1Q, max UDMA/133
[    1.353730] ata2.01: 125045424 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.354817] ata1.01: ATAPI: TSSTcorp CDDVDW SH-222BB, SB00, max UDMA/100
[    1.355436] ata1.00: supports DRM functions and may not be fully accessible
[    1.356705] ata1.00: configured for UDMA/133
[    1.358632] ata2.00: configured for UDMA/133
[    1.361500] ata1.01: configured for UDMA/100
[    1.361603] ata2.01: configured for UDMA/133
[    1.365500] scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 850  1B6Q PQ: 0 ANSI: 5
[    1.365721] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.366321] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[    1.366353] sd 0:0:0:0: [sda] Write Protect is off
[    1.366356] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.366757] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.366801] scsi 0:0:1:0: CD-ROM            TSSTcorp CDDVDW SH-222BB  SB00 PQ: 0 ANSI: 5
[    1.440025] sr 0:0:1:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.440027] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.440182] sr 0:0:1:0: Attached scsi CD-ROM sr0
[    1.440232] sr 0:0:1:0: Attached scsi generic sg1 type 5
[    1.440435] scsi 1:0:0:0: Direct-Access     ATA      ST31000524AS     JC4B PQ: 0 ANSI: 5
[    1.440677] sd 1:0:0:0: Attached scsi generic sg2 type 0
[    1.440784] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.440812] sd 1:0:0:0: [sdb] Write Protect is off
[    1.440814] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.440840] scsi 1:0:1:0: Direct-Access     ATA      SAMSUNG SSD 830  3B1Q PQ: 0 ANSI: 5
[    1.440847] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.441007] sd 1:0:1:0: Attached scsi generic sg3 type 0
[    1.441068] sd 1:0:1:0: [sdc] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
[    1.441084] sd 1:0:1:0: [sdc] Write Protect is off
[    1.441086] sd 1:0:1:0: [sdc] Mode Sense: 00 3a 00 00
[    1.441112] sd 1:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.442628]  sda: sda1 sda2 < sda5 >
[    1.443221] sd 0:0:0:0: [sda] supports TCG Opal
[    1.443222] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.462128]  sdb: sdb1
[    1.462374] sd 1:0:0:0: [sdb] Attached SCSI disk
[    1.462815]  sdc: sdc1
[    1.463051] sd 1:0:1:0: [sdc] Attached SCSI disk
[    1.464969] Freeing unused kernel image memory: 2436K
[    1.488047] Write protecting the kernel read-only data: 20480k
[    1.488558] Freeing unused kernel image memory: 2008K
[    1.488871] Freeing unused kernel image memory: 1872K
[    1.495906] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.495908] x86/mm: Checking user space page tables
[    1.502644] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.524024] usb 1-1.2: new high-speed USB device number 3 using ehci-pci
[    1.540025] usb 3-3.1: new high-speed USB device number 3 using xhci_hcd
[    1.568020] tsc: Refined TSC clocksource calibration: 3100.021 MHz
[    1.568028] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2caf5bd675d, max_idle_ns: 440795281274 ns
[    1.616459] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.616468] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.617041] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0x        (ptrval), 8c:89:a5:c1:9a:5a, XID 0c900800 IRQ 25
[    1.617042] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.617788] r8169 0000:03:00.0 enp3s0: renamed from eth0
[    1.633486] usb 1-1.2: New USB device found, idVendor=04a9, idProduct=1909
[    1.633489] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.633491] usb 1-1.2: Product: CanoScan
[    1.633493] usb 1-1.2: Manufacturer: Canon
[    1.712021] usb 1-1.5: new high-speed USB device number 4 using ehci-pci
[    1.728546] usb 3-3.1: New USB device found, idVendor=045e, idProduct=0761
[    1.728549] usb 3-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.728551] usb 3-3.1: Product: Microsoft® LifeCam VX-2000
[    1.728553] usb 3-3.1: Manufacturer: Microsoft
[    1.763232] random: fast init done
[    1.764262] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.764275] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.764279] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.816022] usb 3-3.2: new full-speed USB device number 4 using xhci_hcd
[    1.821537] usb 1-1.5: New USB device found, idVendor=2001, idProduct=3319
[    1.821540] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.821542] usb 1-1.5: Product: Wireless N Nano USB Adapter
[    1.821544] usb 1-1.5: Manufacturer: Realtek
[    1.821545] usb 1-1.5: SerialNumber: 00e04c000001
[    1.889712] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    1.918714] usb 3-3.2: New USB device found, idVendor=046d, idProduct=c52e
[    1.918716] usb 3-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.918717] usb 3-3.2: Product: USB Receiver
[    1.918718] usb 3-3.2: Manufacturer: Logitech
[    2.017665] ip_tables: (C) 2000-2006 Netfilter Core Team
[    2.025559] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    2.044090] systemd[1]: Detected architecture x86-64.
[    2.045904] systemd[1]: Set hostname to <sirius>.
[    2.208491] systemd[1]: Created slice System Slice.
[    2.208608] systemd[1]: Listening on Journal Socket (/dev/log).
[    2.208720] systemd[1]: Listening on Journal Audit Socket.
[    2.208737] systemd[1]: Reached target User and Group Name Lookups.
[    2.208904] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    2.209020] systemd[1]: Created slice User and Session Slice.
[    2.209084] systemd[1]: Listening on Syslog Socket.
[    2.224988] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    2.233847] RPC: Registered named UNIX socket transport module.
[    2.233848] RPC: Registered udp transport module.
[    2.233849] RPC: Registered tcp transport module.
[    2.233850] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.249411] lp: driver loaded but no devices found
[    2.260979] ppdev: user-space parallel port driver
[    2.358398] parport_pc 00:07: reported by Plug and Play ACPI
[    2.358480] parport0: PC-style at 0x378, irq 5 [PCSPP]
[    2.362163] systemd-journald[271]: Received request to flush runtime journal from PID 1
[    2.363939] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    2.460145] lp0: using parport0 (interrupt-driven).
[    2.593210] clocksource: Switched to clocksource tsc
[    2.635583] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170831/utaddress-247)
[    2.635589] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170831/utaddress-247)
[    2.635593] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.635596] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[    2.635599] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[    2.635602] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.635604] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[    2.635607] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[    2.635609] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.635610] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[    2.635613] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
[    2.635617] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.635617] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    2.642553] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    2.765489] hidraw: raw HID events driver (C) Jiri Kosina
[    2.774453] usbcore: registered new interface driver usbhid
[    2.774455] usbhid: USB HID core driver
[    2.822862] usbcore: registered new interface driver snd-usb-audio
[    2.854212] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[    2.854215] snd_hda_intel 0000:01:00.1: Force to non-snoop mode
[    2.867667] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input2
[    2.867733] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input3
[    2.867796] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input4
[    2.867859] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input5
[    2.867919] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input6
[    2.867979] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input7
[    2.929609] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[    2.929612] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    2.929614] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    2.929615] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    2.929616] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    2.929619] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[    2.929620] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[    2.929622] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[    2.944019] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    2.946604] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    2.946755] media: Linux media interface: v0.10
[    2.948780] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[    2.948782] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[    2.948783] RAPL PMU: hw unit of domain package 2^-16 Joules
[    2.948783] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[    2.949037] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    2.949101] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    2.949154] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    2.949208] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    2.949261] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    2.949314] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[    2.949367] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[    2.949420] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[    2.953546] [drm] radeon kernel modesetting enabled.
[    2.953585] checking generic (e0000000 8d0000) vs hw (e0000000 10000000)
[    2.953586] fb: switching to radeondrmfb from VESA VGA
[    2.953616] Console: switching to colour dummy device 80x25
[    2.953872] [drm] initializing kernel modesetting (VERDE 0x1002:0x683F 0x174B:0xE213 0x00).
[    2.953912] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000d4000-0x000d7fff window]
[    2.953916] caller pci_map_rom+0x5d/0xf0 mapping multiple BARs
[    2.953932] ATOM BIOS: C44501
[    2.954058] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[    2.954059] radeon 0000:01:00.0: GTT: 2048M 0x0000000040000000 - 0x00000000BFFFFFFF
[    2.954061] [drm] Detected VRAM RAM=1024M, BAR=256M
[    2.954062] [drm] RAM width 128bits DDR
[    2.954119] [TTM] Zone  kernel: Available graphics memory: 4058066 kiB
[    2.954120] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    2.954121] [TTM] Initializing pool allocator
[    2.954124] [TTM] Initializing DMA pool allocator
[    2.954140] [drm] radeon: 1024M of VRAM memory ready
[    2.954141] [drm] radeon: 2048M of GTT memory ready.
[    2.954149] [drm] Loading verde Microcode
[    2.989159] 8192eu: loading out-of-tree module taints kernel.
[    2.995252] Linux video capture interface: v2.00
[    2.995715] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.2/3-3.2:1.0/0003:046D:C52E.0001/input/input16
[    2.995743] 8192eu: module verification failed: signature and/or required key missing - tainting kernel
[    3.017695] uvcvideo: Found UVC 1.00 device Microsoft® LifeCam VX-2000 (045e:0761)
[    3.019073] uvcvideo 3-3.1:1.0: Entity type for entity Processing 2 was not initialized!
[    3.019076] uvcvideo 3-3.1:1.0: Entity type for entity Camera 1 was not initialized!
[    3.019078] uvcvideo 3-3.1:1.0: Entity type for entity Extension 4 was not initialized!
[    3.019165] input: Microsoft® LifeCam VX-2000: Mi as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.1/3-3.1:1.0/input/input17
[    3.023060] [drm] Internal thermal controller with fan control
[    3.023137] [drm] probing gen 2 caps for device 8086:101 = 2212d02/0
[    3.030877] [drm] radeon: dpm initialized
[    3.038396] [drm] Found VCE firmware/feedback version 50.0.1 / 17!
[    3.038679] [drm] GART: num cpu pages 524288, num gpu pages 524288
[    3.041519] [drm] probing gen 2 caps for device 8086:101 = 2212d02/0
[    3.041522] [drm] PCIE gen 2 link speeds already enabled
[    3.052138] hid-generic 0003:046D:C52E.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-3.2/input0
[    3.052182] usbcore: registered new interface driver uvcvideo
[    3.052183] USB Video Class driver (1.1.1)
[    3.052885] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.2/3-3.2:1.1/0003:046D:C52E.0002/input/input18
[    3.087982] [drm] PCIE GART of 2048M enabled (table at 0x00000000001D6000).
[    3.088463] radeon 0000:01:00.0: WB enabled
[    3.088467] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x        (ptrval)
[    3.088468] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0x        (ptrval)
[    3.088470] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0x        (ptrval)
[    3.088471] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x        (ptrval)
[    3.088473] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000040000c10 and cpu addr 0x        (ptrval)
[    3.088858] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0x        (ptrval)
[    3.109327] radeon 0000:01:00.0: fence driver on ring 6 use gpu addr 0x0000000040000c18 and cpu addr 0x        (ptrval)
[    3.109329] radeon 0000:01:00.0: fence driver on ring 7 use gpu addr 0x0000000040000c1c and cpu addr 0x        (ptrval)
[    3.109411] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.109413] [drm] Driver supports precise vblank timestamp query.
[    3.109415] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[    3.109462] radeon 0000:01:00.0: radeon: using MSI.
[    3.109489] [drm] radeon: irq initialized.
[    3.113760] hid-generic 0003:046D:C52E.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3.2/input1
[    3.221647] usbcore: registered new interface driver rtl8192eu
[    3.577707] intel_rapl: Found RAPL domain package
[    3.577709] intel_rapl: Found RAPL domain core
[    3.577709] intel_rapl: Found RAPL domain uncore
[    3.577715] intel_rapl: RAPL package 0 domain package locked by BIOS
[    3.577764] [drm] ring test on 0 succeeded in 1 usecs
[    3.577768] [drm] ring test on 1 succeeded in 1 usecs
[    3.577772] [drm] ring test on 2 succeeded in 1 usecs
[    3.577785] [drm] ring test on 3 succeeded in 9 usecs
[    3.577791] [drm] ring test on 4 succeeded in 3 usecs
[    3.753513] [drm] ring test on 5 succeeded in 2 usecs
[    3.753519] [drm] UVD initialized successfully.
[    3.862743] [drm] ring test on 6 succeeded in 21 usecs
[    3.862756] [drm] ring test on 7 succeeded in 4 usecs
[    3.862757] [drm] VCE initialized successfully.
[    3.862988] [drm] ib test on ring 0 succeeded in 0 usecs
[    3.863022] [drm] ib test on ring 1 succeeded in 0 usecs
[    3.863072] [drm] ib test on ring 2 succeeded in 0 usecs
[    3.863109] [drm] ib test on ring 3 succeeded in 0 usecs
[    3.863144] [drm] ib test on ring 4 succeeded in 0 usecs
[    4.053866] rtl8192eu 1-1.5:1.0 wlx542aa274161b: renamed from wlan0
[    4.157830] Adding 15656956k swap on /dev/sda5.  Priority:-2 extents:1 across:15656956k SSFS
[    4.339782] random: crng init done
[    4.339787] random: 7 urandom warning(s) missed due to ratelimiting
[    4.540097] [drm] ib test on ring 5 succeeded
[    4.802477] audit: type=1400 audit(1600240337.518:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=602 comm="apparmor_parser"
[    4.802482] audit: type=1400 audit(1600240337.518:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=602 comm="apparmor_parser"
[    4.802484] audit: type=1400 audit(1600240337.518:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=602 comm="apparmor_parser"
[    4.805010] audit: type=1400 audit(1600240337.522:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=599 comm="apparmor_parser"
[    4.805016] audit: type=1400 audit(1600240337.522:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=599 comm="apparmor_parser"
[    4.805019] audit: type=1400 audit(1600240337.522:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=599 comm="apparmor_parser"
[    4.805021] audit: type=1400 audit(1600240337.522:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=599 comm="apparmor_parser"
[    4.807282] audit: type=1400 audit(1600240337.522:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=603 comm="apparmor_parser"
[    4.808220] audit: type=1400 audit(1600240337.526:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=606 comm="apparmor_parser"
[    5.052042] [drm] ib test on ring 6 succeeded
[    5.564115] [drm] ib test on ring 7 succeeded
[    5.565490] [drm] Radeon Display Connectors
[    5.565492] [drm] Connector 0:
[    5.565492] [drm]   DP-1
[    5.565493] [drm]   HPD4
[    5.565495] [drm]   DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[    5.565495] [drm]   Encoders:
[    5.565496] [drm]     DFP1: INTERNAL_UNIPHY2
[    5.565497] [drm] Connector 1:
[    5.565497] [drm]   HDMI-A-1
[    5.565498] [drm]   HPD1
[    5.565499] [drm]   DDC: 0x6570 0x6570 0x6574 0x6574 0x6578 0x6578 0x657c 0x657c
[    5.565500] [drm]   Encoders:
[    5.565501] [drm]     DFP2: INTERNAL_UNIPHY2
[    5.565501] [drm] Connector 2:
[    5.565502] [drm]   DVI-I-1
[    5.565502] [drm]   HPD2
[    5.565504] [drm]   DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
[    5.565505] [drm]   Encoders:
[    5.565505] [drm]     DFP3: INTERNAL_UNIPHY
[    5.565506] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    5.614313] [drm] fb mappable at 0xE05D9000
[    5.614315] [drm] vram apper at 0xE0000000
[    5.614316] [drm] size 9216000
[    5.614316] [drm] fb depth is 24
[    5.614317] [drm]    pitch is 7680
[    5.614393] fbcon: radeondrmfb (fb0) is primary device
[    5.614514] Console: switching to colour frame buffer device 240x75
[    5.614558] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[    5.636104] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0
[    5.786883] [drm] amdgpu kernel modesetting enabled.
[    6.140402] NFSD: starting 90-second grace period (net f0000099)
[    6.589461] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[    6.725421] r8169 0000:03:00.0 enp3s0: link down
[    6.725499] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[    6.760024] IPv6: ADDRCONF(NETDEV_UP): wlx542aa274161b: link is not ready
[    8.192847] IPv6: ADDRCONF(NETDEV_UP): wlx542aa274161b: link is not ready
[    8.340170] IPv6: ADDRCONF(NETDEV_UP): wlx542aa274161b: link is not ready
[   11.753104] IPv6: ADDRCONF(NETDEV_CHANGE): wlx542aa274161b: link becomes ready
[   27.750200] FS-Cache: Loaded
[   27.758839] FS-Cache: Netfs 'nfs' registered for caching
[   27.774150] NFS: Registering the id_resolver key type
[   27.774160] Key type id_resolver registered
[   27.774160] Key type id_legacy registered
[  296.027619] rfkill: input handler disabled

Hors ligne

#28 Le 16/09/2020, à 09:39

NicoApi73

Re : Dysfontionnement adaptateur D Link DWA 131 - 16.04 > 18.04 [Résolu]

Utilises tu un disque réseau avec NFS?
Peux tu donner :

cat /etc/fstab

Hors ligne

#29 Le 16/09/2020, à 09:45

bilem

Re : Dysfontionnement adaptateur D Link DWA 131 - 16.04 > 18.04 [Résolu]

oui j'utilise des disques avec NFS:

# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda1 during installation
UUID=e7009587-8685-412b-99bd-8d1ca753a84a /               ext4    errors=remount-ro 0       1
# swap was on /dev/sda5 during installation
UUID=1f4efb0b-22b8-415c-b605-400bf3a621a3 none            swap    sw              0       0
#
# monte le disque data
# voir http://www.icaunux.org/doku.php?id=montage_de_partitions_proprietaires_et_permissions
UUID=AE9827A098276655 /media/user/data ntfs rw,user,auto,gid=100,uid=1000,umask=0000 0 0
# ensuite créer un lien symbolique dans /home/user pour avoir un accès facile
#
# monte le dossier user de pollux
192.168.1.14:/home/user/ /home/user/pollux nfs user,noauto,rw 0 0
#
# monte le dossier user de rigel
192.168.1.15:/home/user/ /home/user/rigel nfs user,noauto,rw 0 0
#

Dernière modification par bilem (Le 16/09/2020, à 09:51)

Hors ligne

#30 Le 16/09/2020, à 09:52

NicoApi73

Re : Dysfontionnement adaptateur D Link DWA 131 - 16.04 > 18.04 [Résolu]

ok. Mon hypothèse est que c'est le montage NFS qui pose problème. Pour la valider (ou l'infirmer), pourrais tu commenter ces 2 ilgnes dans fstab et rebooter :

[...]192.168.1.14:/home/user/ /home/user/pollux nfs user,noauto,rw 0 0
[...]
192.168.1.15:/home/user/ /home/user/rigel nfs user,noauto,rw 0 0

Si c'est confirmé, on verra pour trouver une solution, si c'est infirmé, il faudra chercher ailleurs

Hors ligne

#31 Le 16/09/2020, à 10:00

bilem

Re : Dysfontionnement adaptateur D Link DWA 131 - 16.04 > 18.04 [Résolu]

tu as mis le doigt sur la plaie: démarrage en 38 secondes...

Hors ligne

#32 Le 16/09/2020, à 10:10

NicoApi73

Re : Dysfontionnement adaptateur D Link DWA 131 - 16.04 > 18.04 [Résolu]

Je ne suis pas un spécialiste de NFS. Je l'ai utilisé et j'ai contourné l'inconvénient du temps de démarrage en utilisant autoFS. Mais 5 minutes, c'est vraiment beaucoup

Pour attirer des intervenants plus expérimentés que moi sur ce sujet, je te suggère de clore cette discussion sur la clé WiFi (éventuellement tu la continueras si jamais il s'avérait que NFS posait problème à cause de la connexion) et ouvre une nouvelle discussion concernant la performance du temps de connexion de NFS (du genre "Temps de boot très long à cause de NFS")

Hors ligne

#33 Le 16/09/2020, à 10:18

bilem

Re : Dysfontionnement adaptateur D Link DWA 131 - 16.04 > 18.04 [Résolu]

j'ai contourné l'inconvénient du temps de démarrage en utilisant autoFS. Mais 5 minutes, c'est vraiment beaucoup

Veux-tu dire que tu as remplacé nfs par autofs dans fstab?

Pour le reste, je fais comme tu suggères: j'ouvre un nouveau sujet.
Merci, merci et encore merci Nico.
bilem

Hors ligne

#34 Le 16/09/2020, à 10:27

NicoApi73

Re : Dysfontionnement adaptateur D Link DWA 131 - 16.04 > 18.04 [Résolu]

autofs est un peu plus compliqué à configurer que NFS et ce n'est pas dans fstab. Il faut de plus installer autoFS sur chacune des machines qui doivent se connecter aux disques réseau.

Je te renvoie sur la doc pour plus d'informations. J'essaierai de regarder ce soir ma configuration que je ne connais pas par coeur smile : https://doc.ubuntu-fr.org/autofs

Hors ligne

#35 Le 16/09/2020, à 12:19

bilem

Re : Dysfontionnement adaptateur D Link DWA 131 - 16.04 > 18.04 [Résolu]

J'ai regardé la doc de autoFS et je n'ai pas eu de mal à configurer les partages dans les fichiers /etc/auto.master et auto.nfs après avoir installé autofs.
À partir de là, le problème de temps de démarrage est résolu.

Donc, ne te donne pas la peine de vérifier ta propre configuration ce soir.
Avec toute ma reconnaissance.
bilem

Hors ligne