#1 Le 21/11/2020, à 14:26
- TomurIII
[Résolu] Je n'arrive plus à sélectionné window ou ubuntu.
Bonjour,
Je n'arrive plus à sélectionné window ou ubuntu quand je démarre. J'ai installé ubuntu 20.04 LTS et depuis que j'ai voulu redimensionné mon disque dur pour avoir plus de place sur ubuntu, je n'ai pas réussi. Maintenant je n'arrive plus à démarrer window 7. L'ordinateur démarre directement sur ubuntu. Comment puis- je avoir nouveau accès à window 7 ?
Merci d'avance
Dernière modification par TomurIII (Le 23/11/2020, à 14:16)
Hors ligne
#2 Le 21/11/2020, à 18:05
- geole
Re : [Résolu] Je n'arrive plus à sélectionné window ou ubuntu.
Bonjour
Te serait-il possible de fournir le résultat d'un boot-info https://doc.ubuntu-fr.org/tutoriel/boot-info
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#3 Le 21/11/2020, à 19:51
- TomurIII
Re : [Résolu] Je n'arrive plus à sélectionné window ou ubuntu.
Bonjour,
Voici le rapport du boot-info.
Fichier rapport boot info
C'est un lien we transfer car je ne sais comment ajouter des fichiers.
Merci d'avance
Hors ligne
#4 Le 21/11/2020, à 20:02
- geole
Re : [Résolu] Je n'arrive plus à sélectionné window ou ubuntu.
Collage du boot-info
boot-info-4ppa125 [20201121_1739]
============================== Boot Info Summary ===============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos2)/boot/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_msdos biosdisk
---------------------------------------------------------------------------
=> Syslinux MBR (5.00 and higher) is installed in the MBR of /dev/sdb.
=> No boot loader is installed in the MBR of /dev/sdc.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 20.04 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
/boot/grub/i386-pc/core.img
sda3: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 7/2008: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 7
Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe
sda4: __________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 7/2008: NTFS
Boot sector info: According to the info in the boot sector, sda5 starts
at sector 2048.
Mounting failed: $MFTMirr does not match $MFT (record 0).
Failed to mount '/dev/sda5': Erreur d'entrée/sortie
NTFS is either inconsistent, or there is a hardware fault, or it's a
SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows
then reboot into Windows twice. The usage of the /f parameter is very
important! If the device is a SoftRAID/FakeRAID then first activate
it and mount a different device under the /dev/mapper/ directory, (e.g.
/dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation
for more details.
$MFTMirr does not match $MFT (record 0).
Failed to mount '/dev/sda5': Erreur d'entrée/sortie
NTFS is either inconsistent, or there is a hardware fault, or it's a
SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows
then reboot into Windows twice. The usage of the /f parameter is very
important! If the device is a SoftRAID/FakeRAID then first activate
it and mount a different device under the /dev/mapper/ directory, (e.g.
/dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation
for more details.
sdb1: __________________________________________________________________________
File system: vfat
Boot sector type: SYSLINUX 6.04
Boot sector info: Syslinux looks at sector 32776 of /dev/sdb1 for its
second stage. The integrity check of Syslinux failed.
No errors found in the Boot Parameter Block.
Operating System:
Boot files: /boot/grub/grub.cfg /syslinux.cfg
/efi/BOOT/grubx64.efi /efi/BOOT/mmx64.efi /ldlinux.sys
sdc1: __________________________________________________________________________
File system: vfat
Boot sector type: -
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
================================ 2 OS detected =================================
OS#1: Ubuntu 20.04 LTS on sda2
OS#2: Windows 7 on sda3
============================ Architecture/Host Info ============================
CPU architecture: 64-bit
Live-session OS is Ubuntu 64-bit (Ubuntu 20.04 LTS, focal, x86_64)
===================================== UEFI =====================================
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
efibootmgr -v
BootCurrent: 0002
Timeout: 0 seconds
BootOrder: 0002,0001,0000,0003
Boot0000* Hard Drive BBS(HD,,0x0)
Boot0001* CD/DVD Drive BBS(CDROM,,0x0)P2: Optiarc DVD RW AD-7580S .
Boot0002* UEFI: USB USB Hard Drive PciRoot(0x0)/Pci(0x1d,0x0)/USB(1,0)/USB(4,0)/HD(1,MBR,0x565a5,0x800,0xeed7c0)
Boot0003* Network Card BBS(Network,,0x0)Atheros Boot Agent.
============================= Drive/Partition Info =============================
Disks info: ____________________________________________________________________
sda : notGPT, no-BIOSboot, has-noESP, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
sdc : notGPT, no-BIOSboot, has-noESP, usb-disk, not-mmc, no-os, 32 sectors * 512 bytes
Partitions info (1/3): _________________________________________________________
sda1 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, not-far
sda2 : is-os, 64, apt-get, grub-pc , grub2, grub-install, grubenv-ok, update-grub, not-far
sda3 : is-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, farbios
sda5 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, farbios
sdc1 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, not-far
Partitions info (2/3): _________________________________________________________
sda1 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sda2 : isnotESP, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sda3 : isnotESP, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, bootmgr, is-winboot
sda5 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sdc1 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
Partitions info (3/3): _________________________________________________________
sda1 : not-sepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, sda
sda2 : not-sepboot, with-boot, fstab-without-boot, not-sep-usr, with--usr, fstab-without-usr, std-grub.d, sda
sda3 : not-sepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, sda
sda5 : not-sepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, sda
sdc1 : not-sepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, sdc
fdisk -l (filtered): ___________________________________________________________
Disk sda: 596.18 GiB, 640135028736 bytes, 1250263728 sectors
Disk identifier: 0xaa9693fe
Boot Start End Sectors Size Id Type
sda1 2048 1050623 1048576 512M b W95 FAT32
sda2 1050624 52430847 51380224 24.5G 83 Linux
sda3 * 52430848 552536063 500105216 238.5G 7 HPFS/NTFS/exFAT
sda4 552538110 1249206363 696668254 332.2G f W95 Ext'd (LBA)
sda5 552538112 1249204315 696666204 332.2G 7 HPFS/NTFS/exFAT
Disk sdb: 7.48 GiB, 8015282176 bytes, 15654848 sectors
Disk identifier: 0x000565a5
Boot Start End Sectors Size Id Type
sdb1 * 2048 15654847 15652800 7.5G c W95 FAT32 (LBA)
Disk sdc: 58.43 GiB, 62724374528 bytes, 122508544 sectors
Disk identifier: 0x00000000
Boot Start End Sectors Size Id Type
sdc1 32 122508543 122508512 58.4G c W95 FAT32 (LBA)
parted -lm (filtered): _________________________________________________________
sda:640GB:scsi:512:4096:msdos:ATA Hitachi HTS54756:;
1:1049kB:538MB:537MB:fat32::;
2:538MB:26.8GB:26.3GB:ext4::;
3:26.8GB:283GB:256GB:ntfs::boot;
4:283GB:640GB:357GB:::lba;
5:283GB:640GB:357GB:ntfs::;
sdb:8015MB:scsi:512:512:msdos:Kingston DT 101 II:;
1:1049kB:8015MB:8014MB:fat32::boot, lba;
sdc:62.7GB:scsi:512:512:msdos:SanDisk Cruzer Edge:;
1:16.4kB:62.7GB:62.7GB:fat32::lba;
blkid (filtered): ______________________________________________________________
NAME FSTYPE UUID PARTUUID LABEL PARTLABEL
sda
├─sda1 vfat C126-9F2A aa9693fe-01
├─sda2 ext4 7ca81cfb-31e9-4ca7-81bc-47c153565e55 aa9693fe-02
├─sda3 ntfs 262485182484EBDD aa9693fe-03 OS
├─sda4 aa9693fe-04
└─sda5 ntfs C4B6D947B6D93A9E aa9693fe-05 DATA
sdb
└─sdb1 vfat 2A78-224C 000565a5-01 UBUNTU 20_0
sdc
└─sdc1 vfat DEB4-B13F TOM DUTREY
df (filtered): _________________________________________________________________
Avail Use% Mounted on
sda1 511M 0% /mnt/boot-sav/sda1
sda2 5.9G 70% /mnt/boot-sav/sda2
sda3 131.7G 45% /mnt/boot-sav/sda3
sdb1 4.9G 34% /cdrom
sdc1 23.1G 60% /mnt/boot-sav/sdc1
Mount options: __________________________________________________________________
sda1 rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro
sda2 rw,relatime
sda3 rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096
sdb1 ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro
sdc1 rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro
====================== sda2/boot/grub/grub.cfg (filtered) ======================
Ubuntu 7ca81cfb-31e9-4ca7-81bc-47c153565e55
Ubuntu, with Linux 5.4.0-53-generic 7ca81cfb-31e9-4ca7-81bc-47c153565e55
Ubuntu, with Linux 5.4.0-26-generic 7ca81cfb-31e9-4ca7-81bc-47c153565e55
### END /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_uefi-firmware ###
========================== sda2/etc/fstab (filtered) ===========================
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda4 during installation
UUID=7ca81cfb-31e9-4ca7-81bc-47c153565e55 / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda3 during installation
/swapfile none swap sw 0 0
======================= sda2/etc/default/grub (filtered) =======================
GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
==================== sda2: Location of files loaded by Grub ====================
GiB - GB File Fragment(s)
16,631603241 = 17,858048000 boot/grub/grub.cfg 1
17,042274475 = 18,299002880 boot/grub/i386-pc/core.img 1
15,582164764 = 16,731222016 boot/vmlinuz 1
3,852535248 = 4,136628224 boot/vmlinuz-5.4.0-26-generic 2
15,582164764 = 16,731222016 boot/vmlinuz-5.4.0-53-generic 1
3,852535248 = 4,136628224 boot/vmlinuz.old 2
16,051395416 = 17,235054592 boot/initrd.img 3
10,133445740 = 10,880704512 boot/initrd.img-5.4.0-26-generic 3
16,051395416 = 17,235054592 boot/initrd.img-5.4.0-53-generic 3
10,133445740 = 10,880704512 boot/initrd.img.old 3
===================== sda2: ls -l /etc/grub.d/ (filtered) ======================
-rwxr-xr-x 1 root root 17123 avril 15 2020 10_linux
-rwxr-xr-x 1 root root 42128 avril 15 2020 10_linux_zfs
-rwxr-xr-x 1 root root 12894 avril 15 2020 20_linux_xen
-rwxr-xr-x 1 root root 12059 avril 15 2020 30_os-prober
-rwxr-xr-x 1 root root 1424 avril 15 2020 30_uefi-firmware
-rwxr-xr-x 1 root root 214 avril 15 2020 40_custom
-rwxr-xr-x 1 root root 216 avril 15 2020 41_custom
====================== sdb1/boot/grub/grub.cfg (filtered) ======================
Ubuntu
Ubuntu (safe graphics)
OEM install (for manufacturers)
Boot from next volume
UEFI Firmware Settings
========================= sdb1/syslinux.cfg (filtered) =========================
DEFAULT loadconfig
LABEL loadconfig
CONFIG /isolinux/isolinux.cfg
APPEND /isolinux/
==================== sdb1: Location of files loaded by Grub ====================
GiB - GB File Fragment(s)
?? = ?? boot/grub/grub.cfg 1
================== sdb1: Location of files loaded by Syslinux ==================
GiB - GB File Fragment(s)
?? = ?? syslinux.cfg 1
?? = ?? ldlinux.sys 1
Error code 13
mount -r /dev/sda5 /mnt/boot-sav/sda5
mount -r /dev/sda5 : Error code 13
Unmount sdc1 from /media/ubuntu/TOM DUTREY/ to avoid special characters (& or \ or space) incompatibilities
Error code 13
mount -r /dev/sda5 /mnt/boot-sav/sda5
mount -r /dev/sda5 : Error code 13
Suggested repair: ______________________________________________________________
The default repair of the Boot-Repair utility would reinstall the grub2 of
sda2 into the MBRs of all disks (except live-disks and removable disks without OS).
Additional repair would be performed: unhide-bootmenu-10s
Confirmation request before suggested repair: __________________________________
LegacyWindows detected. The boot of your PC is in EFI mode. You may want to retry after changing it to BIOS-compatibility/CSM/Legacy mode.
Are you sure you want to continue anyway?
Final advice in case of suggested repair: ______________________________________
Please do not forget to make your BIOS boot on sda (ATA Hitachi HTS54756) disk!
Please set your BIOS in Legacy mode in order to start your Ubuntu 20.04 LTS, then type command [sudo update-grub] in order to add the Windows entry to your GRUB menu.
Comment faire pour traiter cela lorsque windows ne boote pas
Mounting failed: $MFTMirr does not match $MFT (record 0).
Failed to mount '/dev/sda5': Erreur d'entrée/sortie
NTFS is either inconsistent, or there is a hardware fault, or it's a
SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows
then reboot into Windows twice. The usage of the /f parameter is very
important! If the device is a SoftRAID/FakeRAID then first activate
it and mount a different device under the /dev/mapper/ directory, (e.g.
/dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation
for more details.
Cela serait plus simple si tu ne bootais pas en EFI mais en LEGACY
===================================== UEFI =====================================
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
La suite arrive.
Dernière modification par geole (Le 21/11/2020, à 20:08)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#5 Le 21/11/2020, à 20:08
- TomurIII
Re : [Résolu] Je n'arrive plus à sélectionné window ou ubuntu.
Bonjour,
Je ne comprend pas.
Merci
Hors ligne
#6 Le 21/11/2020, à 20:34
- geole
Re : [Résolu] Je n'arrive plus à sélectionné window ou ubuntu.
La suite.
fdisk -l (filtered): ___________________________________________________________
Disk sda: 596.18 GiB, 640135028736 bytes, 1250263728 sectors
Disk identifier: 0xaa9693fe
Boot Start End Sectors Size Id Type
sda1 2048 1050623 1048576 512M b W95 FAT32
sda2 1050624 52430847 51380224 24.5G 83 Linux
sda3 * 52430848 552536063 500105216 238.5G 7 HPFS/NTFS/exFAT
sda4 552538110 1249206363 696668254 332.2G f W95 Ext'd (LBA)
sda5 552538112 1249204315 696666204 332.2G 7 HPFS/NTFS/exFAT
Boot sector info: According to the info in the boot sector, sda5 starts at sector 2048.
Je ne sais pas comment tu as fait pour installer ubuntu
Ton disque est partitionné en MS-DOS ( présence d'une partition "Ext'd
Dans un tel contexte , le début du disque contient le logiciel permettant de booter windows
Il a disparu et est remplacé par ubuntu (SDA1 et SDA2)
Si tu disposes encore du support d'installation de windows 7, Tu peux peut-être essayer quelque chose.
Mais je pense que la réparation qu'il peut proposer ne conviendra pas.
Il faudra probablement que tu réinstalle windows
Tu devrais être capable de booter ubuntu
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos2)/boot/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_msdos biosdisk
à condition que tu ne bootes pas en EFI car en EFI, il n'y a rien d'installé dans la structure de boot
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
Voici les conseils de boot info
Please do not forget to make your BIOS boot on sda (ATA Hitachi HTS54756) disk!
Please set your BIOS in Legacy mode in order to start your Ubuntu 20.04 LTS, then type command [sudo update-grub] in order to add the Windows entry to your GRUB menu.
Lorsque tu auras booté en LEGACY, tu pourras tenter
sudo os-prober
si windows est détecté
sudo update-grub
et tu donneras le retour de cette commande par copier/coller
cat /boot/grub/grub.cfg
On verra alors s'il a récupéré windows7
Pour savoir si tu bootes réellement en Legacy (NON-EFI)
[ -d /sys/firmware/efi ] && echo "Session EFI" || echo "Session non-EFI"
Si tu ne réussis pas du tout, tu pourras supprimer la partition SDA1, l'ordinateur bootera certainement alors en LEGACY
Dernière modification par geole (Le 21/11/2020, à 20:37)
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#7 Le 22/11/2020, à 12:16
- TomurIII
Re : [Résolu] Je n'arrive plus à sélectionné window ou ubuntu.
Bonjour,
tom@doudou:~$ sudo os-prober
/dev/sda3:Windows 7:Windows:chain
tom@doudou:~$ sudo update-grub
Sourcing file `/etc/default/grub'
Sourcing file `/etc/default/grub.d/init-select.cfg'
Création du fichier de configuration GRUB…
Image Linux trouvée : /boot/vmlinuz-5.4.0-53-generic
Image mémoire initiale trouvée : /boot/initrd.img-5.4.0-53-generic
Image Linux trouvée : /boot/vmlinuz-5.4.0-26-generic
Image mémoire initiale trouvée : /boot/initrd.img-5.4.0-26-generic
Found memtest86+ image: /boot/memtest86+.elf
Found memtest86+ image: /boot/memtest86+.bin
Windows 7 trouvé sur /dev/sda3
fait
tom@doudou:~$ cat /boot/grub/grub.cfg
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${initrdfail}" = 2 ]; then
set initrdfail=
elif [ "${initrdfail}" = 1 ]; then
set next_entry="${prev_entry}"
set prev_entry=
save_env prev_entry
if [ "${next_entry}" ]; then
set initrdfail=2
fi
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function initrdfail {
if [ -n "${have_grubenv}" ]; then if [ -n "${partuuid}" ]; then
if [ -z "${initrdfail}" ]; then
set initrdfail=1
if [ -n "${boot_once}" ]; then
set prev_entry="${default}"
save_env prev_entry
fi
fi
save_env initrdfail
fi; fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 7ca81cfb-31e9-4ca7-81bc-47c153565e55
else
search --no-floppy --fs-uuid --set=root 7ca81cfb-31e9-4ca7-81bc-47c153565e55
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=hidden
set timeout=10
# Fallback hidden-timeout code in case the timeout_style feature is
# unavailable.
elif sleep --interruptible 10 ; then
set timeout=0
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-7ca81cfb-31e9-4ca7-81bc-47c153565e55' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 7ca81cfb-31e9-4ca7-81bc-47c153565e55
else
search --no-floppy --fs-uuid --set=root 7ca81cfb-31e9-4ca7-81bc-47c153565e55
fi
linux /boot/vmlinuz-5.4.0-53-generic root=UUID=7ca81cfb-31e9-4ca7-81bc-47c153565e55 ro quiet splash $vt_handoff
initrd /boot/initrd.img-5.4.0-53-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-7ca81cfb-31e9-4ca7-81bc-47c153565e55' {
menuentry 'Ubuntu, avec Linux 5.4.0-53-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.4.0-53-generic-advanced-7ca81cfb-31e9-4ca7-81bc-47c153565e55' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 7ca81cfb-31e9-4ca7-81bc-47c153565e55
else
search --no-floppy --fs-uuid --set=root 7ca81cfb-31e9-4ca7-81bc-47c153565e55
fi
echo 'Chargement de Linux 5.4.0-53-generic…'
linux /boot/vmlinuz-5.4.0-53-generic root=UUID=7ca81cfb-31e9-4ca7-81bc-47c153565e55 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-5.4.0-53-generic
}
menuentry 'Ubuntu, avec Linux 5.4.0-53-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.4.0-53-generic-recovery-7ca81cfb-31e9-4ca7-81bc-47c153565e55' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 7ca81cfb-31e9-4ca7-81bc-47c153565e55
else
search --no-floppy --fs-uuid --set=root 7ca81cfb-31e9-4ca7-81bc-47c153565e55
fi
echo 'Chargement de Linux 5.4.0-53-generic…'
linux /boot/vmlinuz-5.4.0-53-generic root=UUID=7ca81cfb-31e9-4ca7-81bc-47c153565e55 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-5.4.0-53-generic
}
menuentry 'Ubuntu, avec Linux 5.4.0-26-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.4.0-26-generic-advanced-7ca81cfb-31e9-4ca7-81bc-47c153565e55' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 7ca81cfb-31e9-4ca7-81bc-47c153565e55
else
search --no-floppy --fs-uuid --set=root 7ca81cfb-31e9-4ca7-81bc-47c153565e55
fi
echo 'Chargement de Linux 5.4.0-26-generic…'
linux /boot/vmlinuz-5.4.0-26-generic root=UUID=7ca81cfb-31e9-4ca7-81bc-47c153565e55 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-5.4.0-26-generic
}
menuentry 'Ubuntu, avec Linux 5.4.0-26-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.4.0-26-generic-recovery-7ca81cfb-31e9-4ca7-81bc-47c153565e55' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 7ca81cfb-31e9-4ca7-81bc-47c153565e55
else
search --no-floppy --fs-uuid --set=root 7ca81cfb-31e9-4ca7-81bc-47c153565e55
fi
echo 'Chargement de Linux 5.4.0-26-generic…'
linux /boot/vmlinuz-5.4.0-26-generic root=UUID=7ca81cfb-31e9-4ca7-81bc-47c153565e55 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-5.4.0-26-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/10_linux_zfs ###
### END /etc/grub.d/10_linux_zfs ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 7ca81cfb-31e9-4ca7-81bc-47c153565e55
else
search --no-floppy --fs-uuid --set=root 7ca81cfb-31e9-4ca7-81bc-47c153565e55
fi
knetbsd /boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 7ca81cfb-31e9-4ca7-81bc-47c153565e55
else
search --no-floppy --fs-uuid --set=root 7ca81cfb-31e9-4ca7-81bc-47c153565e55
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows 7 (sur /dev/sda3)' --class windows --class os $menuentry_id_option 'osprober-chain-262485182484EBDD' {
insmod part_msdos
insmod ntfs
set root='hd0,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3 262485182484EBDD
else
search --no-floppy --fs-uuid --set=root 262485182484EBDD
fi
parttool ${root} hidden-
chainloader +1
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
set timeout=10
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
tom@doudou:~$ [ -d /sys/firmware/efi ] && echo "Session EFI" || echo "Session non-EFI"
Session non-EFI
Merci
Hors ligne
#8 Le 22/11/2020, à 14:04
- geole
Re : [Résolu] Je n'arrive plus à sélectionné window ou ubuntu.
Bonjour
Il y a de l'espoir. Il propose le choix de windows
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows 7 (sur /dev/sda3)' --class windows --class os $menuentry_id_option 'osprober-chain-262485182484EBDD' {
insmod part_msdos
insmod ntfs
set root='hd0,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3 --hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3 262485182484EBDD
else
search --no-floppy --fs-uuid --set=root 262485182484EBDD
fi
parttool ${root} hidden-
chainloader +1
}
Tu vas donc pouvoir rebooter , choisir windows et voir sa réaction.
Les grilles de l'installateur https://doc.ubuntu-fr.org/tutoriel/inst … _subiquity
"gedit admin:///etc/fstab" est proscrit, utilisez "pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY xdg-open /etc/fstab" Voir https://doc.ubuntu-fr.org/gedit
Les partitions EXT4 des disques externes => https://forum.ubuntu-fr.org/viewtopic.p … #p22697248
Hors ligne
#9 Le 22/11/2020, à 14:17
- TomurIII
Re : [Résolu] Je n'arrive plus à sélectionné window ou ubuntu.
Bonjour,
Je peut à nouveau sélectionner windows 7 ou ubuntu.
Merci pour tout.
Hors ligne