Ubuntu-fr

ujiko

[RESOLU] problèmes de configuration de IMAP

Bonjour,
j'ai réussis à installer postfix (sur le port 465 en émission c'est plus sûr)
mais je n'arrive pas à configurer imap

##VERSION: $Id: 675bac8a9b30dff4f1968cec803a51c89b6b1b1b-20210301071151$
#
# imapd created from imapd.dist by sysconftool
#
# Do not alter lines that begin with ##, they are used when upgrading
# this configuration.
#
#  Copyright 1998 - 2015 Double Precision, Inc.  See COPYING for
#  distribution information.
#
#  This configuration file sets various options for the Courier-IMAP server
#  when used with the couriertcpd server.
#  A lot of the stuff here is documented in the manual page for couriertcpd.
#
#  NOTE - do not use \ to split long variable contents on multiple lines.
#  This will break the default imapd.rc script, which parses this file.
#
##NAME: ADDRESS:0
#
#  Address to listen on, can be set to a single IP address.
#
# ADDRESS=127.0.0.1

ADDRESS=127.0.0.1

##NAME: PORT:1
#
#  Port numbers that connections are accepted on.  The default is 143,
#  the standard IMAP port.
#
#  Multiple port numbers can be separated by commas.  When multiple port
#  numbers are used it is possible to select a specific IP address for a
#  given port as "ip.port".  For example, "127.0.0.1.900,192.68.0.1.900"
#  accepts connections on port 900 on IP addresses 127.0.0.1 and 192.68.0.1
#  The previous ADDRESS setting is a default for ports that do not have
#  a specified IP address.

PORT=143
PORT=993

##NAME: AUTHSERVICE:0
#
#  It's possible to authenticate using a different 'service' parameter
#  depending on the connection's port.  This only works with authentication
#  modules that use the 'service' parameter, such as PAM.  Example:
#
  AUTHSERVICE143=imap
  AUTHSERVICE993=imaps

##NAME: MAXDAEMONS:0
#
#  Maximum number of IMAP servers started
#

MAXDAEMONS=40

##NAME: MAXPERIP:0
#
#  Maximum number of connections to accept from the same IP address

MAXPERIP=20

##NAME: PIDFILE:0
#
#  File where couriertcpd will save its process ID
#

PIDFILE=/run/courier/imapd.pid

##NAME: TCPDOPTS:0
#
# Miscellaneous couriertcpd options that shouldn't be changed.
#

TCPDOPTS="-nodnslookup -noidentlookup"

##NAME: ACCESSFILE:0
#
# IMAP access file.

IMAPACCESSFILE=/etc/courier/imapaccess

##NAME: LOGGEROPTS:0
#
# courierlogger(1) options.
#

LOGGEROPTS="-name=imapd"

##NAME: DEFDOMAIN:0
#
# Optional default domain. If the username does not contain the
# first character of DEFDOMAIN, then it is appended to the username.
# If DEFDOMAIN and DOMAINSEP are both set, then DEFDOMAIN is appended
# only if the username does not contain any character from DOMAINSEP.
# You can set different default domains based on the the interface IP
# address using the -access and -accesslocal options of couriertcpd(1).

#DEFDOMAIN="@example.com"

##NAME: IMAP_CAPABILITY:1
#
# IMAP_CAPABILITY specifies what most of the response should be to the
# CAPABILITY command.
#
# If you have properly configured Courier to use CRAM-MD5, CRAM-SHA1, or
# CRAM-SHA256 authentication (see INSTALL), set IMAP_CAPABILITY as follows:
#
 IMAP_CAPABILITY="IMAP4rev1 UIDPLUS CHILDREN NAMESPACE THREAD=ORDEREDSUBJECT THREAD=REFERENCES SORT QUOTA AUTH=CRAM-MD5 AUTH=CRAM-SHA1 AUTH=CRAM-SHA256 IDLE"
#

#IMAP_CAPABILITY="IMAP4rev1 UIDPLUS CHILDREN NAMESPACE THREAD=ORDEREDSUBJECT THREAD=REFERENCES SORT QUOTA IDLE"

##NAME: KEYWORDS_CAPABILITY:0
#
# IMAP_KEYWORDS=1 enables custom IMAP keywords.  Set this option to 0 to
# disable custom keywords.
#
# IMAP_KEYWORDS=2 also enables custom IMAP keywords, but uses a slower
# algorithm. Use this setting if keyword-related problems occur when
# multiple IMAP clients are updating keywords on the same message.

IMAP_KEYWORDS=1

##NAME: ACL_CAPABILITY:0
#
# IMAP_ACL=1 enables IMAP ACL extension. Set this option to 0 to
# disable ACL capabilities announce.

IMAP_ACL=1

##NAME: SMAP1_CAPABILITY:0
#
# EXPERIMENTAL
#
# To enable the experimental "Simple Mail Access Protocol" extensions,
# uncomment the following setting.
#
# SMAP_CAPABILITY=SMAP1

##NAME: IMAP_CAPABILITY_ORIG:2
#
# For use by webadmin

IMAP_CAPABILITY_ORIG="IMAP4rev1 UIDPLUS CHILDREN NAMESPACE THREAD=ORDEREDSUBJECT THREAD=REFERENCES SORT QUOTA AUTH=CRAM-MD5 AUTH=CRAM-SHA1 AUTH=CRAM-SHA256 IDLE"

##NAME: IMAP_PROXY:0
#
# Enable proxying.  See README.proxy

IMAP_PROXY=0

##NAME: PROXY_HOSTNAME:0
#
# Override value from gethostname() when checking if a proxy connection is
# required.
#
# PROXY_HOSTNAME=

##NAME: IMAP_PROXY_FOREIGN:0
#
# Proxying to non-Courier servers.  Re-sends the CAPABILITY command after
# logging in to the remote server.  May not work with all IMAP clients.

IMAP_PROXY_FOREIGN=0

##NAME: IMAP_IDLE_TIMEOUT:0
#
# This setting controls how often
# the server polls for changes to the folder, in IDLE mode (in seconds).

IMAP_IDLE_TIMEOUT=60

##NAME: IMAP_MAILBOX_SANITY_CHECK:0
#
# Sanity check -- make sure home directory and maildir's ownership matches
# the IMAP server's effective uid and gid

IMAP_MAILBOX_SANITY_CHECK=1

##NAME: IMAP_CAPABILITY_TLS:0
#
# The following setting will advertise SASL PLAIN authentication after
# STARTTLS is established.  If you want to allow SASL PLAIN authentication
# with or without TLS then just comment this out, and add AUTH=PLAIN to
# IMAP_CAPABILITY

IMAP_CAPABILITY_TLS="$IMAP_CAPABILITY AUTH=PLAIN"

##NAME: IMAP_TLS_ORIG:0
#
# For use by webadmin

IMAP_CAPABILITY_TLS_ORIG="$IMAP_CAPABILITY_ORIG AUTH=PLAIN"

##NAME: IMAP_DISABLETHREADSORT:0
#
# Set IMAP_DISABLETHREADSORT to disable the THREAD and SORT commands -
# server side sorting and threading.
#
# Those capabilities will still be advertised, but the server will reject
# them.  Set this option if you want to disable all the extra load from
# server-side threading and sorting.  Not advertising those capabilities
# will simply result in the clients reading the entire folder, and sorting
# it on the client side.  That will still put some load on the server.
# advertising these capabilities, but rejecting the commands, will stop this
# silliness.
#

IMAP_DISABLETHREADSORT=0

##NAME: IMAP_CHECK_ALL_FOLDERS:0
#
# Set IMAP_CHECK_ALL_FOLDERS to 1 if you want the server to check for new
# mail in every folder.  Not all IMAP clients use the IMAP's new mail
# indicator, but some do.  Normally new mail is checked only in INBOX,
# because it is a comparatively time consuming operation, and it would be
# a complete waste of time unless mail filters are used to deliver
# mail directly to folders.
#
# When IMAP clients are used which support new mail indication, and when
# mail filters are used to sort incoming mail into folders, setting
# IMAP_CHECK_ALL_FOLDERS to 1 will allow IMAP clients to announce new
# mail in folders.  Note that this will result in slightly more load on the
# server.
#

IMAP_CHECK_ALL_FOLDERS=0

##NAME: IMAP_OBSOLETE_CLIENT:0
#
# Set IMAP_OBSOLETE_CLIENT if your IMAP client expects \\NoInferiors to mean
# what \\HasNoChildren really means.

IMAP_OBSOLETE_CLIENT=0

##NAME: IMAP_UMASK:0
#
# IMAP_UMASK sets the umask of the server process.  The value of IMAP_UMASK is
# simply passed to the "umask" command.  The default value is 022.
#
# This feature is mostly useful for shared folders, where the file permissions
# of the messages may be important.

IMAP_UMASK=022

##NAME: IMAP_ULIMITD:0
#
# IMAP_ULIMITD sets the maximum size of the data segment of the server
# process.  The value of IMAP_ULIMITD is simply passed to the "ulimit -d"
# command (or ulimit -v).  The argument to ulimi sets the upper limit on the
# size of the data segment of the server process, in kilobytes.  The default
# value of 65536 sets a very generous limit of 64 megabytes, which should
# be more than plenty for anyone.
#
# This feature is used as an additional safety check that should stop
# any potential denial-of-service attacks that exploit any kind of
# a memory leak to exhaust all the available memory on the server.
# It is theoretically possible that obscenely huge folders will also
# result in the server running out of memory when doing server-side
# sorting (by my calculations you have to have at least 100,000 messages
# in a single folder, for that to happen).

IMAP_ULIMITD=131072

##NAME: IMAP_USELOCKS:0
#
# Setting IMAP_USELOCKS to 1 will use dot-locking to support concurrent
# multiple access to the same folder.  This incurs slight additional
# overhead.  Concurrent multiple access will still work without this setting,
# however occasionally a minor race condition may result in an IMAP client
# downloading the same message twice, or a keyword update will fail.
#
# IMAP_USELOCKS=1 is strongly recommended when shared folders are used.

IMAP_USELOCKS=1

##NAME: IMAP_SHAREDINDEXFILE:0
#
# The index of all accessible folders.  Do not change this setting unless
# you know what you're doing.  See README.sharedfolders for additional
# information.

IMAP_SHAREDINDEXFILE=/etc/courier/shared/index

##NAME: IMAP_ENHANCEDIDLE:0
#
# If Courier was compiled with the File Alteration Monitor, setting
# IMAP_ENHANCEDIDLE to 1 enables enhanced IDLE mode, where multiple
# clients may open the same folder concurrently, and receive updates to
# folder contents in realtime.  See the imapd(8) man page for additional
# information.
#
# IMPORTANT: IMAP_USELOCKS *MUST* also be set to 1, and IDLE must be included
# in the IMAP_CAPABILITY list.
#

IMAP_ENHANCEDIDLE=0

##NAME: IMAP_TRASHFOLDERNAME:0
#
# The name of the magic trash Folder.  For MSOE compatibility,
# you can set IMAP_TRASHFOLDERNAME="Deleted Items".
#
# IMPORTANT:  If you change this, you must also change IMAP_EMPTYTRASH

IMAP_TRASHFOLDERNAME=Trash

##NAME: IMAP_EMPTYTRASH:0
#
# The following setting is optional, and causes messages from the given
# folder to be automatically deleted after the given number of days.
# IMAP_EMPTYTRASH is a comma-separated list of folder:days.  The default
# setting, below, purges 7 day old messages from the Trash folder.
# Another useful setting would be:
#
# IMAP_EMPTYTRASH=Trash:7,Sent:30
#
# This would also delete messages from the Sent folder (presumably copies
# of sent mail) after 30 days.  This is a global setting that is applied to
# every mail account, and is probably useful in a controlled, corporate
# environment.
#
# Important: the purging is controlled by CTIME, not MTIME (the file time
# as shown by ls).  It is perfectly ordinary to see stuff in Trash that's
# a year old.  That's the file modification time, MTIME, that's displayed.
# This is generally when the message was originally delivered to this
# mailbox.  Purging is controlled by a different timestamp, CTIME, which is
# changed when the file is moved to the Trash folder (and at other times too).
#
# You might want to disable this setting in certain situations - it results
# in a stat() of every file in each folder, at login and logout.
#

IMAP_EMPTYTRASH=Trash:7

##NAME: IMAP_MOVE_EXPUNGE_TO_TRASH:0
#
# Set IMAP_MOVE_EXPUNGE_TO_TRASH to move expunged messages to Trash.  This
# effectively allows an undo of message deletion by fishing the deleted
# mail from trash.  Trash can be manually expunged as usually, and mail
# will get automatically expunged from Trash according to IMAP_EMPTYTRASH.
#
# NOTE: shared folders are still expunged as usual.  Shared folders are
# not affected.
#

IMAP_MOVE_EXPUNGE_TO_TRASH=0

##NAME: IMAP_LOG_DELETIONS:0
#
#
# Set IMAP_LOG_DELETIONS to log all message deletions to syslog.
#
# IMAP_LOG_DELETIONS=1

##NAME: AUTH_MKHOMEDIR_SKEL:0
#
# Uncomment this setting to automatically create a home directory on first
# login. if the AUTH_MKHOMEDIR_SKEL environment variable is set, and the
# home directory does not exist, the home directory gets created, with its
# initial contents copied from AUTH_MKHOMEDIR_SKEL which must be a directory,
# typically /etc/skel.
#
# Note that this must be a complete home directory structure, including
# the maildir. Typically:
#
# mkdir /etc/skel
# chmod 700 /etc/skel
# maildirmake /etc/skel/Maildir
#
# This directory gets copied as is, preserving each file/subdirectory's
# permissions, with only userid/groupid changed to match the account's.
#
#
# AUTH_MKHOMEDIR_SKEL=/etc/skel

##NAME: IMAPDEBUGFILE:0
#
# IMAPDEBUGFILE="imaplog.dat"
#
# Generate diagnostic logging of IMAP commands.
#
# Set this globally, restart the server. Touch this file in an account's
# maildir directory, and Courier-IMAP will append all IMAP commands received
# for new sessions for this account. NOTE: existing IMAP sessions are not
# affected, only new IMAP logins.


##NAME: OUTBOX:0
#
# The next set of options deal with the "Outbox" enhancement.
# Uncomment the following setting to create a special folder, named
# INBOX.Outbox
#
# OUTBOX=.Outbox

##NAME: SENDMAIL:0
#
# If OUTBOX is defined, mail can be sent via the IMAP connection by copying
# a message to the INBOX.Outbox folder.  For all practical matters,
# INBOX.Outbox looks and behaves just like any other IMAP folder.  If this
# folder doesn't exist it must be created by the IMAP mail client, just
# like any other IMAP folder.  The kicker: any message copied or moved to
# this folder is will be E-mailed by the Courier-IMAP server, by running
# the SENDMAIL program.  Therefore, messages copied or moved to this
# folder must be well-formed RFC-2822 messages, with the recipient list
# specified in the To:, Cc:, and Bcc: headers.  Courier-IMAP relies on
# SENDMAIL to read the recipient list from these headers (and delete the Bcc:
# header) by running the command "$SENDMAIL -oi -t -f $SENDER", with the
# message piped on standard input.  $SENDER will be the return address
# of the message, which is set by the authentication module.
#
# DO NOT MODIFY SENDMAIL, below, unless you know what you're doing.
#

#SENDMAIL=/usr/sbin/sendmail

##NAME: HEADERFROM:0
#
# For administrative and oversight purposes, the return address, $SENDER
# will also be saved in the X-IMAP-Sender mail header.  This header gets
# added to the sent E-mail (but it doesn't get saved in the copy of the
# message that's saved in the folder)
#
# WARNING - By enabling OUTBOX above, *every* IMAP mail client will receive
# the magic OUTBOX treatment.  Therefore advance LARTing is in order for
# _all_ of your lusers, until every one of them is aware of this.  Otherwise if
# OUTBOX is left at its default setting - a folder name that might be used
# accidentally - some people may be in for a rude surprise.  You can redefine
# the name of the magic folder by changing OUTBOX, above.  You should do that
# and pick a less-obvious name.  Perhaps brand it with your organizational
# name ( OUTBOX=.WidgetsAndSonsOutbox )

HEADERFROM=X-IMAP-Sender

##NAME: ID_FIELDS:0
#
# Have the server be polite, and identify its version to the client. The client
# must be logged in before the server will identify itself. Additionally,
# the client will mutually supply its own software version, and the server will
# log it.
#
# Although the server's banner message identifies itself, in free-form manner,
# this the ID IMAP extension, for clients to log.
#
# IMAP_ID_FIELDS is the sum of the following values:
#
# 1 - identify the version of the IMAP server
# 2 - identify the operating system (if available)
# 4 - identify the operating system release (if available)
#
# A value of 0 identifies the server software only.
#
# Uncomment this setting to enable the IMAP ID extension. One reason you might
# want to enable it is to log the clients' software version. Enabling this
# setting will mutually log the client's software, in the system logs.
#
# IMAP_ID_FIELDS=0

##NAME: OUTBOX_MULTIPLE_SEND:0
#
# Remove the following comment to allow a COPY of more than one message to
# the Outbox, at a time.
#
# OUTBOX_MULTIPLE_SEND=1

##NAME: IMAPDSTART:0
#
# IMAPDSTART is not used directly.  Rather, this is a convenient flag to
# be read by your system startup script in /etc/rc.d, like this:
#
#  . /etc/courier/imapd
#
#  case x$IMAPDSTART in
#  x[yY]*)
#        /usr/lib/courier/imapd.rc start
#        ;;
#  esac
#
# The default setting is going to be NO, so you'll have to manually flip
# it to yes.

IMAPDSTART=YES

##NAME: MAILDIRPATH:0
#
# MAILDIRPATH - directory name of the maildir directory.
#
MAILDIRPATH=Maildir

Dernière modification par ujiko (Le 12/01/2024, à 03:36)

ujiko

Re : [RESOLU] problèmes de configuration de IMAP

j'ai cette erreur au lancement de courier-imap ;

imapd[887689]: bind: Address already in use

ujiko

Re : [RESOLU] problèmes de configuration de IMAP

J'hallucine c'est quoi ce paquet, il refuse de répondre sur le port 993.

bruno

Re : [RESOLU] problèmes de configuration de IMAP

Bonjour,

j'ai réussis à installer postfix (sur le port 465 en émission c'est plus sûr)

Ce qui veut dire ?
Postfix doit être en écoute sur le port 25 (smtp) pour communiquer avec les autres serveurs et sur le port 465 (submissions ou smtps) pour que les clients authentifiés puissent lui soumettre les courriels de manière sécurisée avec du TLS implicite.

j'ai cette erreur au lancement de courier-imap ;

imapd[887689]: bind: Address already in use

Cela signifie probablement qu'un autre service est déjà en écoute sur les ports IMAP ou IMAPS.
Il faut donner le retour de :

ss -tnlp '( sport :143 or sport :993 )'

---

Attention, les bouteilles vendues par Nestlé Waters sont contaminées au monoxyde de dihydrogène.

ujiko

Re : [RESOLU] problèmes de configuration de IMAP

En fait j'ai une issue ; quand je réinstalle courier-imap cela me donne ça ;

Signing certificate...
Created symlink /etc/systemd/system/multi-user.target.wants/courier-imap.service
 → /lib/systemd/system/courier-imap.service.
Could not execute systemctl:  at /usr/bin/deb-systemd-invoke line 142.
Created symlink /etc/systemd/system/multi-user.target.wants/courier-imap-ssl.ser
vice → /lib/systemd/system/courier-imap-ssl.service.
Could not execute systemctl:  at /usr/bin/deb-systemd-invoke line 142.
Traitement des actions différées (« triggers ») pour man-db (2.10.2-1) ...
root@bbb:/home/gilles# 

bruno

Re : [RESOLU] problèmes de configuration de IMAP

Ce n'est pas ce que j'ai demandé.
Mais si tu as trouvé une issue, c'est que le problème est résolu.

Dernière modification par bruno (Le 07/01/2024, à 17:30)

---

Attention, les bouteilles vendues par Nestlé Waters sont contaminées au monoxyde de dihydrogène.

ujiko

Re : [RESOLU] problèmes de configuration de IMAP

Après avoir purgé  il n'y a plus ce probleme d'adresse capturée ;

root@bbb:/home/gilles# ss -tnlp '( sport :143 or sport :993 )'
State          Recv-Q          Send-Q                   Local Address:Port                   Peer Address:Port         Process         
root@bbb:/home/gilles# 

bruno

Re : [RESOLU] problèmes de configuration de IMAP

Et tu n'arrives plus à le réinstaller ?
Sinon, pourquoi avoir choisi courier-imap plutôt que dovecot ?

---

Attention, les bouteilles vendues par Nestlé Waters sont contaminées au monoxyde de dihydrogène.

ujiko

Re : [RESOLU] problèmes de configuration de IMAP

Parce que dovecot est obsolète, non?

root@bbb:/home/gilles# apt install dovecot
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances... Fait
Lecture des informations d'état... Fait      
Aucune version du paquet dovecot n'est disponible, mais il existe dans la base
de données. Cela signifie en général que le paquet est manquant, qu'il est devenu obsolète
ou qu'il n'est disponible que sur une autre source

E: Le paquet « dovecot » n'a pas de version susceptible d'être installée

Dernière modification par ujiko (Le 07/01/2024, à 17:42)

ujiko

Re : [RESOLU] problèmes de configuration de IMAP

là c'est le ponpon ;

 Le paquet « courier-imap-ssl » n'a pas de version susceptible d'être installée
root@bbb:/home/gilles# 

bruno

Re : [RESOLU] problèmes de configuration de IMAP

Si tu inventes les noms de paquet cela ne risque pas de fonctionner. C'est dovecot-imapd (et autres dovecot-*) et courier-imap (et autres courier-*)
La touche TAB est ton amie pour l'auto-complétion.

---

Attention, les bouteilles vendues par Nestlé Waters sont contaminées au monoxyde de dihydrogène.

ujiko

Re : [RESOLU] problèmes de configuration de IMAP

J'ai installé dovecot, problème en passe d'être résolu.