#1 Le 08/04/2006, à 22:23
- Imagine
Pas de son - cmi 8330 [Résolu]
Malgrès de nombreux essais d'après ce que j'ai pu trouver sur le net, je n'arrive pas à initialiser ma puce son intégrée alors qu'elle fonctionne sous windows.
Config : pentium 350 * 64mo * DD 30go
puce son : cmi 8330 (Sound Pro HT1869V+)
Haut-parleur grisé avec une croix rouge dans l'interface
système -> préférence -> son : pas de carte son listée
lsmod | grep snd -> rien
lspci | grep audio -> rien
extrait de dmesg
[ 25.794836] isapnp: Scanning for PnP cards...
[ 25.889892] pnp: CMI8330 quirk - fixing interrupts and dma
[ 25.890080] isapnp: Card 'CMI8330. Audio Adapter'
[ 25.890099] isapnp: 1 Plug & Play card detected totalLa carte semble détectée mais pas moyen d'avoir du son
Si quelqu'un a une idée...
Je rajoute lspnp et dmesg en entier si ça peut servir
regis@ubuntu:~$ lspnp
00 PNP0c01 System board
01 PNP0000 AT programmable interrupt controller
02 PNP0200 AT DMA controller
03 PNP0100 AT system timer
04 PNP0b00 AT real-time clock
05 PNP0303 IBM enhanced keyboard (101/102-key, PS/2 mouse support)
06 PNP0800 AT-style speaker sound
07 PNP0c04 Math coprocessor
08 PNP0501 16550A-compatible COM port
09 PNP0501 16550A-compatible COM port
0a PNP0401 ECP printer port
0b PNP0700 PC standard floppy disk controller
0c PNP0a03 PCI bus
0d PNP0f13 PS/2 port for PS/2-style miceregis@ubuntu:~$ dmesg
[4294667.296000] Linux version 2.6.12-10-386 (buildd@terranova) (gcc version 3.4.5 20050809 (prerelease) (Ubuntu 3.4.4-6ubuntu8.1)) #1 Sat Mar 11 16:13:17 UTC 2006
[4294667.296000] BIOS-provided physical RAM map:
[4294667.296000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[4294667.296000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[4294667.296000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[4294667.296000] BIOS-e820: 0000000000100000 - 0000000004000000 (usable)
[4294667.296000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[4294667.296000] 0MB HIGHMEM available.
[4294667.296000] 64MB LOWMEM available.
[4294667.296000] On node 0 totalpages: 16384
[4294667.296000] DMA zone: 4096 pages, LIFO batch:1
[4294667.296000] Normal zone: 12288 pages, LIFO batch:7
[4294667.296000] HighMem zone: 0 pages, LIFO batch:1
[4294667.296000] DMI not present.
[4294667.296000] ACPI: Unable to locate RSDP
[4294667.296000] Allocating PCI resources starting at 04000000 (gap: 04000000:fbff0000)
[4294667.296000] Built 1 zonelists
[4294667.296000] Kernel command line: root=/dev/hda1 ro quiet splash
[4294667.296000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[4294667.296000] mapped APIC to ffffd000 (01081000)
[4294667.296000] Initializing CPU#0
[4294667.296000] PID hash table entries: 512 (order: 9, 8192 bytes)
[ 0.000000] Detected 350.899 MHz processor.
[ 23.370734] Using tsc for high-res timesource
[ 23.372261] Console: colour VGA+ 80x25
[ 23.374216] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 23.374766] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 23.383933] Memory: 56580k/65536k available (1416k kernel code, 8456k reserved, 762k data, 224k init, 0k highmem)
[ 23.383960] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 23.384386] Calibrating delay loop... 692.22 BogoMIPS (lpj=346112)
[ 23.405261] Security Framework v1.0.0 initialized
[ 23.405305] SELinux: Disabled at boot.
[ 23.405374] Mount-cache hash table entries: 512
[ 23.406054] CPU: After generic identify, caps: 0183f9ff 00000000 00000000 00000000 00000000 00000000 00000000
[ 23.406132] CPU: After vendor identify, caps: 0183f9ff 00000000 00000000 00000000 00000000 00000000 00000000
[ 23.406186] CPU: L1 I cache: 16K, L1 D cache: 16K
[ 23.406201] CPU: L2 cache: 512K
[ 23.406219] CPU: After all inits, caps: 0183f9ff 00000000 00000000 00000040 00000000 00000000 00000000
[ 23.406248] CPU: Intel Pentium II (Deschutes) stepping 02
[ 23.406271] Enabling fast FPU save and restore... done.
[ 23.406295] Checking 'hlt' instruction... OK.
[ 23.410113] Checking for popad bug... OK.
[ 23.410932] checking if image is initramfs... it is
[ 25.760120] Freeing initrd memory: 5165k freed
[ 25.763443] NET: Registered protocol family 16
[ 25.763658] EISA bus registered
[ 25.779561] PCI: PCI BIOS revision 2.10 entry at 0xfdb31, last bus=1
[ 25.779597] PCI: Using configuration type 1
[ 25.779617] mtrr: v2.0 (20020519)
[ 25.780429] ACPI: Subsystem revision 20050729
[ 25.780442] ACPI: Interpreter disabled.
[ 25.780465] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 25.780500] pnp: PnP ACPI: disabled
[ 25.780517] PnPBIOS: Scanning system for PnP BIOS support...
[ 25.780641] PnPBIOS: Found PnP BIOS installation structure at 0xc00f7f30
[ 25.780663] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x797e, dseg 0xf0000
[ 25.782616] PnPBIOS: Missing SMALL_TAG_ENDDEP tag
[ 25.783205] PnPBIOS: Missing SMALL_TAG_ENDDEP tag
[ 25.783466] PnPBIOS: Missing SMALL_TAG_ENDDEP tag
[ 25.783883] PnPBIOS: Missing SMALL_TAG_ENDDEP tag
[ 25.784107] PnPBIOS: 13 nodes reported by PnP BIOS; 13 recorded by driver
[ 25.784348] PCI: Probing PCI hardware
[ 25.784366] PCI: Probing PCI hardware (bus 00)
[ 25.785433] Boot video device is 0000:01:00.0
[ 25.787375] PCI: Discovered primary peer bus 0a [IRQ]
[ 25.787626] PCI: Discovered primary peer bus c3 [IRQ]
[ 25.787656] PCI: Using IRQ router VIA [1106/0586] at 0000:00:07.0
[ 25.793170] audit: initializing netlink socket (disabled)
[ 25.793219] audit: initialized
[ 25.793837] VFS: Disk quotas dquot_6.5.1
[ 25.793972] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 25.794174] devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
[ 25.794206] devfs: boot_options: 0x0
[ 25.794364] Initializing Cryptographic API
[ 25.794398] Activating ISA DMA hang workarounds.
[ 25.794836] isapnp: Scanning for PnP cards...
[ 25.889892] pnp: CMI8330 quirk - fixing interrupts and dma
[ 25.890080] isapnp: Card 'CMI8330. Audio Adapter'
[ 25.890099] isapnp: 1 Plug & Play card detected total
[ 26.010885] PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12
[ 26.011395] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 26.011429] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 26.011454] Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled
[ 26.011802] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 26.024696] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 26.025583] io scheduler noop registered
[ 26.025668] io scheduler anticipatory registered
[ 26.025694] io scheduler deadline registered
[ 26.025741] io scheduler cfq registered
[ 26.028342] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 26.028990] EISA: Probing bus 0 at eisa.0
[ 26.029078] Cannot allocate resource for EISA slot 5
[ 26.029113] EISA: Detected 0 cards.
[ 26.029256] NET: Registered protocol family 2
[ 26.039356] IP: routing cache hash table of 512 buckets, 4Kbytes
[ 26.040218] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 26.040588] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[ 26.040810] TCP: Hash tables configured (established 4096 bind 4096)
[ 26.041249] NET: Registered protocol family 8
[ 26.041263] NET: Registered protocol family 20
[ 26.043003] Freeing unused kernel memory: 224k freed
[ 26.111328] input: AT Translated Set 2 keyboard on isa0060/serio0
[ 26.129359] vga16fb: initializing
[ 26.129379] vga16fb: mapped to 0xc00a0000
[ 26.268532] Console: switching to colour frame buffer device 80x30
[ 26.268560] fb0: VGA16 VGA frame buffer device
[ 27.537142] Capability LSM initialized
[ 27.607652] NET: Registered protocol family 1
[ 27.681394] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 27.681450] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 27.707750] VP_IDE: IDE controller at PCI slot 0000:00:07.1
[ 27.707801] PCI: Via IRQ fixup for 0000:00:07.1, from 14 to 0
[ 27.707856] VP_IDE: chipset revision 6
[ 27.707869] VP_IDE: not 100% native mode: will probe irqs later
[ 27.707907] VP_IDE: VIA vt82c586b (rev 41) IDE UDMA33 controller on pci0000:00:07.1
[ 27.707963] ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
[ 27.708009] ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
[ 27.708053] Probing IDE interface ide0...
[ 28.091979] hda: IBM-DTLA-307030, ATA DISK drive
[ 28.705522] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 28.705778] Probing IDE interface ide1...
[ 29.498610] hdc: SONY CDU4811, ATAPI CD/DVD-ROM drive
[ 30.213948] hdd: LITE-ON DVD SOHD-167T, ATAPI CD/DVD-ROM drive
[ 30.265144] ide1 at 0x170-0x177,0x376 on irq 15
[ 30.265767] Probing IDE interface ide2...
[ 30.778915] Probing IDE interface ide3...
[ 31.292878] Probing IDE interface ide4...
[ 31.806839] Probing IDE interface ide5...
[ 32.344969] hda: max request size: 128KiB
[ 32.376230] hda: 60036480 sectors (30738 MB) w/1916KiB Cache, CHS=59560/16/63, UDMA(33)
[ 32.376262] hda: cache flushes not supported
[ 32.376596] /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 >
[ 32.439068] hdc: ATAPI 48X CD-ROM drive, 120kB Cache
[ 32.439100] Uniform CD-ROM driver Revision: 3.20
[ 32.440973] hdd: ATAPI 48X DVD-ROM drive, 512kB Cache
[ 34.302598] Attempting manual resume
[ 34.303244] swsusp: Suspend partition has wrong signature?
[ 34.539204] usbcore: registered new driver usbfs
[ 34.539380] usbcore: registered new driver hub
[ 34.547164] USB Universal Host Controller Interface driver v2.2
[ 34.547451] PCI: Found IRQ 3 for device 0000:00:07.2
[ 34.547483] IRQ routing conflict for 0000:00:07.2, have irq 10, want irq 3
[ 34.547540] uhci_hcd 0000:00:07.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
[ 34.609804] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
[ 34.609846] uhci_hcd 0000:00:07.2: irq 10, io base 0x0000de00
[ 34.610544] hub 1-0:1.0: USB hub found
[ 34.610594] hub 1-0:1.0: 2 ports detected
[ 34.716296] via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
[ 34.716515] PCI: setting IRQ 3 as level-triggered
[ 34.716533] PCI: Assigned IRQ 3 for device 0000:00:0a.0
[ 34.722257] eth0: VIA Rhine III at 0x1dc00, 00:05:5d:97:2b:d5, IRQ 3.
[ 34.723026] eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link 41e1.
[ 39.091449] Attempting manual resume
[ 39.091951] swsusp: Suspend partition has wrong signature?
[ 39.151339] kjournald starting. Commit interval 5 seconds
[ 39.151402] EXT3-fs: mounted filesystem with ordered data mode.
[ 40.508965] md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
[ 49.479484] Adding 184708k swap on /dev/hda5. Priority:-1 extents:1
[ 49.838030] EXT3 FS on hda1, internal journal
[ 69.631197] parport: PnPBIOS parport detected.
[ 69.631320] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 69.709500] parport0: faking semi-colon
[ 69.729890] parport0: Printer, HEWLETT-PACKARD DESKJET 710C
[ 69.759605] lp0: using parport0 (interrupt-driven).
[ 69.908412] mice: PS/2 mouse device common for all mice
[ 70.397251] input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1
[ 71.816997] ts: Compaq touchscreen protocol output
[ 76.038394] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[ 81.616734] cdrom: open failed.
[ 81.618345] cdrom: open failed.
[ 85.494226] Linux agpgart interface v0.101 (c) Dave Jones
[ 85.547481] agpgart: Detected VIA Apollo Pro 133 chipset
[ 85.618410] agpgart: AGP aperture is 128M @ 0xe0000000
[ 86.323208] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 86.367779] shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x1001
[ 91.580873] Real Time Clock Driver v1.12
[ 92.029686] input: PC Speaker
[ 93.071395] Floppy drive(s): fd0 is 1.44M
[ 93.086284] FDC 0 is a post-1991 82077
[ 94.442375] pnp: Device 01:01.02 activated.
[ 94.503074] gameport: NS558 PnP Gameport is pnp01:01.02/gameport0, io 0x200, speed 693kHz
[ 97.415046] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 97.506406] NET: Registered protocol family 17
[ 100.571079] NET: Registered protocol family 10
[ 100.571833] Disabled Privacy Extensions on device c02eb280(lo)
[ 100.572723] IPv6 over IPv4 tunneling driver
[ 111.244542] eth0: no IPv6 routers present
[ 114.738089] lp0: ECP mode
[ 114.896395] lp0: ECP mode
[ 116.137721] lp0: ECP mode
[ 124.291250] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 131.597211] Bluetooth: Core ver 2.7
[ 131.597258] NET: Registered protocol family 31
[ 131.597271] Bluetooth: HCI device and connection manager initialized
[ 131.597323] Bluetooth: HCI socket layer initialized
[ 131.693447] Bluetooth: L2CAP ver 2.7
[ 131.693471] Bluetooth: L2CAP socket layer initialized
[ 131.852490] Bluetooth: RFCOMM ver 1.5
[ 131.852547] Bluetooth: RFCOMM socket layer initialized
[ 131.852599] Bluetooth: RFCOMM TTY layer initializedDernière modification par Imagine (Le 15/04/2006, à 19:44)
Hors ligne
#2 Le 09/04/2006, à 10:12
- pathelsy
Re : Pas de son - cmi 8330 [Résolu]
Bonjour,
J'ai une CMI aussi et j'ai galéré pour trouver le canal par lequel passe le son.
Il faut en fait tester tous les canaux pour trouver le bon (bizarement, ce n'est pas le master)
Chez moi, c'est PCM
Cordialement.
Association AVOD
http://avod.free.fr
Hors ligne
#3 Le 09/04/2006, à 14:09
- Imagine
Re : Pas de son - cmi 8330 [Résolu]
Pour l'instant mon problème n'est pas de trouver sur quel canal passe le son.
Si la carte est bien détectée, aucun pilote ne se charge.
Hors ligne
#4 Le 09/04/2006, à 21:12
- Imagine
Re : Pas de son - cmi 8330 [Résolu]
Ca y est j'ai une carte son 
et même du son 
J'ai désactivé le port com 2 dans le bios, du coup ma carte ethenet prend l'IRQ 3 (ça je l'avait fait avant de poster) puis j'ai refait la procédure trouvée chez ALSA http://www.alsa-project.org/alsa-doc/do … le=cmi8330
je me suis arrêté à :
modprobe snd-cmi8330;modprobe snd-pcm-oss;modprobe snd-mixer-oss;modprobe snd-seq-oss
du coup la carte ne s'initialise pas au démarrage et je doit retapper les modprobe à chaque démarrage 
Demain je cherche comment avoir le son dès le démarrage
Hors ligne